diff options
author | André Fabian Silva Delgado <emulatorman@parabola.nu> | 2015-08-05 17:04:01 -0300 |
---|---|---|
committer | André Fabian Silva Delgado <emulatorman@parabola.nu> | 2015-08-05 17:04:01 -0300 |
commit | 57f0f512b273f60d52568b8c6b77e17f5636edc0 (patch) | |
tree | 5e910f0e82173f4ef4f51111366a3f1299037a7b /drivers/clk/keystone |
Initial import
Diffstat (limited to 'drivers/clk/keystone')
-rw-r--r-- | drivers/clk/keystone/Makefile | 1 | ||||
-rw-r--r-- | drivers/clk/keystone/gate.c | 269 | ||||
-rw-r--r-- | drivers/clk/keystone/pll.c | 321 |
3 files changed, 591 insertions, 0 deletions
diff --git a/drivers/clk/keystone/Makefile b/drivers/clk/keystone/Makefile new file mode 100644 index 000000000..0477cf63f --- /dev/null +++ b/drivers/clk/keystone/Makefile @@ -0,0 +1 @@ +obj-y += pll.o gate.o diff --git a/drivers/clk/keystone/gate.c b/drivers/clk/keystone/gate.c new file mode 100644 index 000000000..86f1e362e --- /dev/null +++ b/drivers/clk/keystone/gate.c @@ -0,0 +1,269 @@ +/* + * Clock driver for Keystone 2 based devices + * + * Copyright (C) 2013 Texas Instruments. + * Murali Karicheri <m-karicheri2@ti.com> + * Santosh Shilimkar <santosh.shilimkar@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#include <linux/clk.h> +#include <linux/clk-provider.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/of_address.h> +#include <linux/of.h> +#include <linux/module.h> + +/* PSC register offsets */ +#define PTCMD 0x120 +#define PTSTAT 0x128 +#define PDSTAT 0x200 +#define PDCTL 0x300 +#define MDSTAT 0x800 +#define MDCTL 0xa00 + +/* PSC module states */ +#define PSC_STATE_SWRSTDISABLE 0 +#define PSC_STATE_SYNCRST 1 +#define PSC_STATE_DISABLE 2 +#define PSC_STATE_ENABLE 3 + +#define MDSTAT_STATE_MASK 0x3f +#define MDSTAT_MCKOUT BIT(12) +#define PDSTAT_STATE_MASK 0x1f +#define MDCTL_FORCE BIT(31) +#define MDCTL_LRESET BIT(8) +#define PDCTL_NEXT BIT(0) + +/* Maximum timeout to bail out state transition for module */ +#define STATE_TRANS_MAX_COUNT 0xffff + +static void __iomem *domain_transition_base; + +/** + * struct clk_psc_data - PSC data + * @control_base: Base address for a PSC control + * @domain_base: Base address for a PSC domain + * @domain_id: PSC domain id number + */ +struct clk_psc_data { + void __iomem *control_base; + void __iomem *domain_base; + u32 domain_id; +}; + +/** + * struct clk_psc - PSC clock structure + * @hw: clk_hw for the psc + * @psc_data: PSC driver specific data + * @lock: Spinlock used by the driver + */ +struct clk_psc { + struct clk_hw hw; + struct clk_psc_data *psc_data; + spinlock_t *lock; +}; + +static DEFINE_SPINLOCK(psc_lock); + +#define to_clk_psc(_hw) container_of(_hw, struct clk_psc, hw) + +static void psc_config(void __iomem *control_base, void __iomem *domain_base, + u32 next_state, u32 domain_id) +{ + u32 ptcmd, pdstat, pdctl, mdstat, mdctl, ptstat; + u32 count = STATE_TRANS_MAX_COUNT; + + mdctl = readl(control_base + MDCTL); + mdctl &= ~MDSTAT_STATE_MASK; + mdctl |= next_state; + /* For disable, we always put the module in local reset */ + if (next_state == PSC_STATE_DISABLE) + mdctl &= ~MDCTL_LRESET; + writel(mdctl, control_base + MDCTL); + + pdstat = readl(domain_base + PDSTAT); + if (!(pdstat & PDSTAT_STATE_MASK)) { + pdctl = readl(domain_base + PDCTL); + pdctl |= PDCTL_NEXT; + writel(pdctl, domain_base + PDCTL); + } + + ptcmd = 1 << domain_id; + writel(ptcmd, domain_transition_base + PTCMD); + do { + ptstat = readl(domain_transition_base + PTSTAT); + } while (((ptstat >> domain_id) & 1) && count--); + + count = STATE_TRANS_MAX_COUNT; + do { + mdstat = readl(control_base + MDSTAT); + } while (!((mdstat & MDSTAT_STATE_MASK) == next_state) && count--); +} + +static int keystone_clk_is_enabled(struct clk_hw *hw) +{ + struct clk_psc *psc = to_clk_psc(hw); + struct clk_psc_data *data = psc->psc_data; + u32 mdstat = readl(data->control_base + MDSTAT); + + return (mdstat & MDSTAT_MCKOUT) ? 1 : 0; +} + +static int keystone_clk_enable(struct clk_hw *hw) +{ + struct clk_psc *psc = to_clk_psc(hw); + struct clk_psc_data *data = psc->psc_data; + unsigned long flags = 0; + + if (psc->lock) + spin_lock_irqsave(psc->lock, flags); + + psc_config(data->control_base, data->domain_base, + PSC_STATE_ENABLE, data->domain_id); + + if (psc->lock) + spin_unlock_irqrestore(psc->lock, flags); + + return 0; +} + +static void keystone_clk_disable(struct clk_hw *hw) +{ + struct clk_psc *psc = to_clk_psc(hw); + struct clk_psc_data *data = psc->psc_data; + unsigned long flags = 0; + + if (psc->lock) + spin_lock_irqsave(psc->lock, flags); + + psc_config(data->control_base, data->domain_base, + PSC_STATE_DISABLE, data->domain_id); + + if (psc->lock) + spin_unlock_irqrestore(psc->lock, flags); +} + +static const struct clk_ops clk_psc_ops = { + .enable = keystone_clk_enable, + .disable = keystone_clk_disable, + .is_enabled = keystone_clk_is_enabled, +}; + +/** + * clk_register_psc - register psc clock + * @dev: device that is registering this clock + * @name: name of this clock + * @parent_name: name of clock's parent + * @psc_data: platform data to configure this clock + * @lock: spinlock used by this clock + */ +static struct clk *clk_register_psc(struct device *dev, + const char *name, + const char *parent_name, + struct clk_psc_data *psc_data, + spinlock_t *lock) +{ + struct clk_init_data init; + struct clk_psc *psc; + struct clk *clk; + + psc = kzalloc(sizeof(*psc), GFP_KERNEL); + if (!psc) + return ERR_PTR(-ENOMEM); + + init.name = name; + init.ops = &clk_psc_ops; + init.flags = 0; + init.parent_names = (parent_name ? &parent_name : NULL); + init.num_parents = (parent_name ? 1 : 0); + + psc->psc_data = psc_data; + psc->lock = lock; + psc->hw.init = &init; + + clk = clk_register(NULL, &psc->hw); + if (IS_ERR(clk)) + kfree(psc); + + return clk; +} + +/** + * of_psc_clk_init - initialize psc clock through DT + * @node: device tree node for this clock + * @lock: spinlock used by this clock + */ +static void __init of_psc_clk_init(struct device_node *node, spinlock_t *lock) +{ + const char *clk_name = node->name; + const char *parent_name; + struct clk_psc_data *data; + struct clk *clk; + int i; + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) { + pr_err("%s: Out of memory\n", __func__); + return; + } + + i = of_property_match_string(node, "reg-names", "control"); + data->control_base = of_iomap(node, i); + if (!data->control_base) { + pr_err("%s: control ioremap failed\n", __func__); + goto out; + } + + i = of_property_match_string(node, "reg-names", "domain"); + data->domain_base = of_iomap(node, i); + if (!data->domain_base) { + pr_err("%s: domain ioremap failed\n", __func__); + goto unmap_ctrl; + } + + of_property_read_u32(node, "domain-id", &data->domain_id); + + /* Domain transition registers at fixed address space of domain_id 0 */ + if (!domain_transition_base && !data->domain_id) + domain_transition_base = data->domain_base; + + of_property_read_string(node, "clock-output-names", &clk_name); + parent_name = of_clk_get_parent_name(node, 0); + if (!parent_name) { + pr_err("%s: Parent clock not found\n", __func__); + goto unmap_domain; + } + + clk = clk_register_psc(NULL, clk_name, parent_name, data, lock); + if (!IS_ERR(clk)) { + of_clk_add_provider(node, of_clk_src_simple_get, clk); + return; + } + + pr_err("%s: error registering clk %s\n", __func__, node->name); + +unmap_domain: + iounmap(data->domain_base); +unmap_ctrl: + iounmap(data->control_base); +out: + kfree(data); + return; +} + +/** + * of_keystone_psc_clk_init - initialize psc clock through DT + * @node: device tree node for this clock + */ +static void __init of_keystone_psc_clk_init(struct device_node *node) +{ + of_psc_clk_init(node, &psc_lock); +} +CLK_OF_DECLARE(keystone_gate_clk, "ti,keystone,psc-clock", + of_keystone_psc_clk_init); diff --git a/drivers/clk/keystone/pll.c b/drivers/clk/keystone/pll.c new file mode 100644 index 000000000..0dd8a4b12 --- /dev/null +++ b/drivers/clk/keystone/pll.c @@ -0,0 +1,321 @@ +/* + * PLL clock driver for Keystone devices + * + * Copyright (C) 2013 Texas Instruments Inc. + * Murali Karicheri <m-karicheri2@ti.com> + * Santosh Shilimkar <santosh.shilimkar@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#include <linux/clk.h> +#include <linux/clk-provider.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/of_address.h> +#include <linux/of.h> +#include <linux/module.h> + +#define PLLM_LOW_MASK 0x3f +#define PLLM_HIGH_MASK 0x7ffc0 +#define MAIN_PLLM_HIGH_MASK 0x7f000 +#define PLLM_HIGH_SHIFT 6 +#define PLLD_MASK 0x3f +#define CLKOD_MASK 0x780000 +#define CLKOD_SHIFT 19 + +/** + * struct clk_pll_data - pll data structure + * @has_pllctrl: If set to non zero, lower 6 bits of multiplier is in pllm + * register of pll controller, else it is in the pll_ctrl0((bit 11-6) + * @phy_pllm: Physical address of PLLM in pll controller. Used when + * has_pllctrl is non zero. + * @phy_pll_ctl0: Physical address of PLL ctrl0. This could be that of + * Main PLL or any other PLLs in the device such as ARM PLL, DDR PLL + * or PA PLL available on keystone2. These PLLs are controlled by + * this register. Main PLL is controlled by a PLL controller. + * @pllm: PLL register map address + * @pll_ctl0: PLL controller map address + * @pllm_lower_mask: multiplier lower mask + * @pllm_upper_mask: multiplier upper mask + * @pllm_upper_shift: multiplier upper shift + * @plld_mask: divider mask + * @clkod_mask: output divider mask + * @clkod_shift: output divider shift + * @plld_mask: divider mask + * @postdiv: Fixed post divider + */ +struct clk_pll_data { + bool has_pllctrl; + u32 phy_pllm; + u32 phy_pll_ctl0; + void __iomem *pllm; + void __iomem *pll_ctl0; + u32 pllm_lower_mask; + u32 pllm_upper_mask; + u32 pllm_upper_shift; + u32 plld_mask; + u32 clkod_mask; + u32 clkod_shift; + u32 postdiv; +}; + +/** + * struct clk_pll - Main pll clock + * @hw: clk_hw for the pll + * @pll_data: PLL driver specific data + */ +struct clk_pll { + struct clk_hw hw; + struct clk_pll_data *pll_data; +}; + +#define to_clk_pll(_hw) container_of(_hw, struct clk_pll, hw) + +static unsigned long clk_pllclk_recalc(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct clk_pll *pll = to_clk_pll(hw); + struct clk_pll_data *pll_data = pll->pll_data; + unsigned long rate = parent_rate; + u32 mult = 0, prediv, postdiv, val; + + /* + * get bits 0-5 of multiplier from pllctrl PLLM register + * if has_pllctrl is non zero + */ + if (pll_data->has_pllctrl) { + val = readl(pll_data->pllm); + mult = (val & pll_data->pllm_lower_mask); + } + + /* bit6-12 of PLLM is in Main PLL control register */ + val = readl(pll_data->pll_ctl0); + mult |= ((val & pll_data->pllm_upper_mask) + >> pll_data->pllm_upper_shift); + prediv = (val & pll_data->plld_mask); + + if (!pll_data->has_pllctrl) + /* read post divider from od bits*/ + postdiv = ((val & pll_data->clkod_mask) >> + pll_data->clkod_shift) + 1; + else + postdiv = pll_data->postdiv; + + rate /= (prediv + 1); + rate = (rate * (mult + 1)); + rate /= postdiv; + + return rate; +} + +static const struct clk_ops clk_pll_ops = { + .recalc_rate = clk_pllclk_recalc, +}; + +static struct clk *clk_register_pll(struct device *dev, + const char *name, + const char *parent_name, + struct clk_pll_data *pll_data) +{ + struct clk_init_data init; + struct clk_pll *pll; + struct clk *clk; + + pll = kzalloc(sizeof(*pll), GFP_KERNEL); + if (!pll) + return ERR_PTR(-ENOMEM); + + init.name = name; + init.ops = &clk_pll_ops; + init.flags = 0; + init.parent_names = (parent_name ? &parent_name : NULL); + init.num_parents = (parent_name ? 1 : 0); + + pll->pll_data = pll_data; + pll->hw.init = &init; + + clk = clk_register(NULL, &pll->hw); + if (IS_ERR(clk)) + goto out; + + return clk; +out: + kfree(pll); + return NULL; +} + +/** + * _of_clk_init - PLL initialisation via DT + * @node: device tree node for this clock + * @pllctrl: If true, lower 6 bits of multiplier is in pllm register of + * pll controller, else it is in the control regsiter0(bit 11-6) + */ +static void __init _of_pll_clk_init(struct device_node *node, bool pllctrl) +{ + struct clk_pll_data *pll_data; + const char *parent_name; + struct clk *clk; + int i; + + pll_data = kzalloc(sizeof(*pll_data), GFP_KERNEL); + if (!pll_data) { + pr_err("%s: Out of memory\n", __func__); + return; + } + + parent_name = of_clk_get_parent_name(node, 0); + if (of_property_read_u32(node, "fixed-postdiv", &pll_data->postdiv)) { + /* assume the PLL has output divider register bits */ + pll_data->clkod_mask = CLKOD_MASK; + pll_data->clkod_shift = CLKOD_SHIFT; + } + + i = of_property_match_string(node, "reg-names", "control"); + pll_data->pll_ctl0 = of_iomap(node, i); + if (!pll_data->pll_ctl0) { + pr_err("%s: ioremap failed\n", __func__); + goto out; + } + + pll_data->pllm_lower_mask = PLLM_LOW_MASK; + pll_data->pllm_upper_shift = PLLM_HIGH_SHIFT; + pll_data->plld_mask = PLLD_MASK; + pll_data->has_pllctrl = pllctrl; + if (!pll_data->has_pllctrl) { + pll_data->pllm_upper_mask = PLLM_HIGH_MASK; + } else { + pll_data->pllm_upper_mask = MAIN_PLLM_HIGH_MASK; + i = of_property_match_string(node, "reg-names", "multiplier"); + pll_data->pllm = of_iomap(node, i); + if (!pll_data->pllm) { + iounmap(pll_data->pll_ctl0); + goto out; + } + } + + clk = clk_register_pll(NULL, node->name, parent_name, pll_data); + if (clk) { + of_clk_add_provider(node, of_clk_src_simple_get, clk); + return; + } + +out: + pr_err("%s: error initializing pll %s\n", __func__, node->name); + kfree(pll_data); +} + +/** + * of_keystone_pll_clk_init - PLL initialisation DT wrapper + * @node: device tree node for this clock + */ +static void __init of_keystone_pll_clk_init(struct device_node *node) +{ + _of_pll_clk_init(node, false); +} +CLK_OF_DECLARE(keystone_pll_clock, "ti,keystone,pll-clock", + of_keystone_pll_clk_init); + +/** + * of_keystone_pll_main_clk_init - Main PLL initialisation DT wrapper + * @node: device tree node for this clock + */ +static void __init of_keystone_main_pll_clk_init(struct device_node *node) +{ + _of_pll_clk_init(node, true); +} +CLK_OF_DECLARE(keystone_main_pll_clock, "ti,keystone,main-pll-clock", + of_keystone_main_pll_clk_init); + +/** + * of_pll_div_clk_init - PLL divider setup function + * @node: device tree node for this clock + */ +static void __init of_pll_div_clk_init(struct device_node *node) +{ + const char *parent_name; + void __iomem *reg; + u32 shift, mask; + struct clk *clk; + const char *clk_name = node->name; + + of_property_read_string(node, "clock-output-names", &clk_name); + reg = of_iomap(node, 0); + if (!reg) { + pr_err("%s: ioremap failed\n", __func__); + return; + } + + parent_name = of_clk_get_parent_name(node, 0); + if (!parent_name) { + pr_err("%s: missing parent clock\n", __func__); + return; + } + + if (of_property_read_u32(node, "bit-shift", &shift)) { + pr_err("%s: missing 'shift' property\n", __func__); + return; + } + + if (of_property_read_u32(node, "bit-mask", &mask)) { + pr_err("%s: missing 'bit-mask' property\n", __func__); + return; + } + + clk = clk_register_divider(NULL, clk_name, parent_name, 0, reg, shift, + mask, 0, NULL); + if (clk) + of_clk_add_provider(node, of_clk_src_simple_get, clk); + else + pr_err("%s: error registering divider %s\n", __func__, clk_name); +} +CLK_OF_DECLARE(pll_divider_clock, "ti,keystone,pll-divider-clock", of_pll_div_clk_init); + +/** + * of_pll_mux_clk_init - PLL mux setup function + * @node: device tree node for this clock + */ +static void __init of_pll_mux_clk_init(struct device_node *node) +{ + void __iomem *reg; + u32 shift, mask; + struct clk *clk; + const char *parents[2]; + const char *clk_name = node->name; + + of_property_read_string(node, "clock-output-names", &clk_name); + reg = of_iomap(node, 0); + if (!reg) { + pr_err("%s: ioremap failed\n", __func__); + return; + } + + parents[0] = of_clk_get_parent_name(node, 0); + parents[1] = of_clk_get_parent_name(node, 1); + if (!parents[0] || !parents[1]) { + pr_err("%s: missing parent clocks\n", __func__); + return; + } + + if (of_property_read_u32(node, "bit-shift", &shift)) { + pr_err("%s: missing 'shift' property\n", __func__); + return; + } + + if (of_property_read_u32(node, "bit-mask", &mask)) { + pr_err("%s: missing 'bit-mask' property\n", __func__); + return; + } + + clk = clk_register_mux(NULL, clk_name, (const char **)&parents, + ARRAY_SIZE(parents) , 0, reg, shift, mask, + 0, NULL); + if (clk) + of_clk_add_provider(node, of_clk_src_simple_get, clk); + else + pr_err("%s: error registering mux %s\n", __func__, clk_name); +} +CLK_OF_DECLARE(pll_mux_clock, "ti,keystone,pll-mux-clock", of_pll_mux_clk_init); |