Linux-libre 4.4-gnupck-4.4-gnu

1 files changed, 46 insertions, 19 deletions

diff --git a/drivers/clk/rockchip/clk-mmc-phase.c b/drivers/clk/rockchip/clk-mmc-phase.c
index 9b613426e..268564482 100644
--- a/drivers/clk/rockchip/clk-mmc-phase.c
+++ b/drivers/clk/rockchip/clk-mmc-phase.c
@@ -41,12 +41,14 @@ static unsigned long rockchip_mmc_recalc(struct clk_hw *hw,
 #define ROCKCHIP_MMC_DEGREE_MASK 0x3
 #define ROCKCHIP_MMC_DELAYNUM_OFFSET 2
 #define ROCKCHIP_MMC_DELAYNUM_MASK (0xff << ROCKCHIP_MMC_DELAYNUM_OFFSET)
+#define ROCKCHIP_MMC_INIT_STATE_RESET 0x1
+#define ROCKCHIP_MMC_INIT_STATE_SHIFT 1
 
 #define PSECS_PER_SEC 1000000000000LL
 
 /*
- * Each fine delay is between 40ps-80ps. Assume each fine delay is 60ps to
- * simplify calculations. So 45degs could be anywhere between 33deg and 66deg.
+ * Each fine delay is between 44ps-77ps. Assume each fine delay is 60ps to
+ * simplify calculations. So 45degs could be anywhere between 33deg and 57.8deg.
  */
 #define ROCKCHIP_MMC_DELAY_ELEMENT_PSEC 60
 
@@ -69,7 +71,7 @@ static int rockchip_mmc_get_phase(struct clk_hw *hw)
 
 		delay_num = (raw_value & ROCKCHIP_MMC_DELAYNUM_MASK);
 		delay_num >>= ROCKCHIP_MMC_DELAYNUM_OFFSET;
-		degrees += delay_num * factor / 10000;
+		degrees += DIV_ROUND_CLOSEST(delay_num * factor, 10000);
 	}
 
 	return degrees % 360;
@@ -82,25 +84,41 @@ static int rockchip_mmc_set_phase(struct clk_hw *hw, int degrees)
 	u8 nineties, remainder;
 	u8 delay_num;
 	u32 raw_value;
-	u64 delay;
-
-	/* allow 22 to be 22.5 */
-	degrees++;
-	/* floor to 22.5 increment */
-	degrees -= ((degrees) * 10 % 225) / 10;
+	u32 delay;
 
 	nineties = degrees / 90;
-	/* 22.5 multiples */
-	remainder = (degrees % 90) / 22;
-
-	delay = PSECS_PER_SEC;
-	do_div(delay, rate);
-	/* / 360 / 22.5 */
-	do_div(delay, 16);
-	do_div(delay, ROCKCHIP_MMC_DELAY_ELEMENT_PSEC);
-
+	remainder = (degrees % 90);
+
+	/*
+	 * Due to the inexact nature of the "fine" delay, we might
+	 * actually go non-monotonic.  We don't go _too_ monotonic
+	 * though, so we should be OK.  Here are options of how we may
+	 * work:
+	 *
+	 * Ideally we end up with:
+	 *   1.0, 2.0, ..., 69.0, 70.0, ...,  89.0, 90.0
+	 *
+	 * On one extreme (if delay is actually 44ps):
+	 *   .73, 1.5, ..., 50.6, 51.3, ...,  65.3, 90.0
+	 * The other (if delay is actually 77ps):
+	 *   1.3, 2.6, ..., 88.6. 89.8, ..., 114.0, 90
+	 *
+	 * It's possible we might make a delay that is up to 25
+	 * degrees off from what we think we're making.  That's OK
+	 * though because we should be REALLY far from any bad range.
+	 */
+
+	/*
+	 * Convert to delay; do a little extra work to make sure we
+	 * don't overflow 32-bit / 64-bit numbers.
+	 */
+	delay = 10000000; /* PSECS_PER_SEC / 10000 / 10 */
 	delay *= remainder;
-	delay_num = (u8) min(delay, 255ULL);
+	delay = DIV_ROUND_CLOSEST(delay,
+			(rate / 1000) * 36 *
+				(ROCKCHIP_MMC_DELAY_ELEMENT_PSEC / 10));
+
+	delay_num = (u8) min_t(u32, delay, 255);
 
 	raw_value = delay_num ? ROCKCHIP_MMC_DELAY_SEL : 0;
 	raw_value |= delay_num << ROCKCHIP_MMC_DELAYNUM_OFFSET;
@@ -143,6 +161,15 @@ struct clk *rockchip_clk_register_mmc(const char *name,
 	mmc_clock->reg = reg;
 	mmc_clock->shift = shift;
 
+	/*
+	 * Assert init_state to soft reset the CLKGEN
+	 * for mmc tuning phase and degree
+	 */
+	if (mmc_clock->shift == ROCKCHIP_MMC_INIT_STATE_SHIFT)
+		writel(HIWORD_UPDATE(ROCKCHIP_MMC_INIT_STATE_RESET,
+				     ROCKCHIP_MMC_INIT_STATE_RESET,
+				     mmc_clock->shift), mmc_clock->reg);
+
 	clk = clk_register(NULL, &mmc_clock->hw);
 	if (IS_ERR(clk))
 		goto err_free;