Linux-libre 4.2-gnu

1 files changed, 349 insertions, 0 deletions

diff --git a/drivers/clk/samsung/clk-cpu.c b/drivers/clk/samsung/clk-cpu.c
new file mode 100644
index 000000000..3a1fe07cf
--- /dev/null
+++ b/drivers/clk/samsung/clk-cpu.c
@@ -0,0 +1,349 @@
+/*
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ * Author: Thomas Abraham <thomas.ab@samsung.com>
+ *
+ * Copyright (c) 2015 Samsung Electronics Co., Ltd.
+ * Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This file contains the utility function to register CPU clock for Samsung
+ * Exynos platforms. A CPU clock is defined as a clock supplied to a CPU or a
+ * group of CPUs. The CPU clock is typically derived from a hierarchy of clock
+ * blocks which includes mux and divider blocks. There are a number of other
+ * auxiliary clocks supplied to the CPU domain such as the debug blocks and AXI
+ * clock for CPU domain. The rates of these auxiliary clocks are related to the
+ * CPU clock rate and this relation is usually specified in the hardware manual
+ * of the SoC or supplied after the SoC characterization.
+ *
+ * The below implementation of the CPU clock allows the rate changes of the CPU
+ * clock and the corresponding rate changes of the auxillary clocks of the CPU
+ * domain. The platform clock driver provides a clock register configuration
+ * for each configurable rate which is then used to program the clock hardware
+ * registers to acheive a fast co-oridinated rate change for all the CPU domain
+ * clocks.
+ *
+ * On a rate change request for the CPU clock, the rate change is propagated
+ * upto the PLL supplying the clock to the CPU domain clock blocks. While the
+ * CPU domain PLL is reconfigured, the CPU domain clocks are driven using an
+ * alternate clock source. If required, the alternate clock source is divided
+ * down in order to keep the output clock rate within the previous OPP limits.
+*/
+
+#include <linux/errno.h>
+#include "clk-cpu.h"
+
+#define E4210_SRC_CPU		0x0
+#define E4210_STAT_CPU		0x200
+#define E4210_DIV_CPU0		0x300
+#define E4210_DIV_CPU1		0x304
+#define E4210_DIV_STAT_CPU0	0x400
+#define E4210_DIV_STAT_CPU1	0x404
+
+#define E4210_DIV0_RATIO0_MASK	0x7
+#define E4210_DIV1_HPM_MASK	(0x7 << 4)
+#define E4210_DIV1_COPY_MASK	(0x7 << 0)
+#define E4210_MUX_HPM_MASK	(1 << 20)
+#define E4210_DIV0_ATB_SHIFT	16
+#define E4210_DIV0_ATB_MASK	(DIV_MASK << E4210_DIV0_ATB_SHIFT)
+
+#define MAX_DIV			8
+#define DIV_MASK		7
+#define DIV_MASK_ALL		0xffffffff
+#define MUX_MASK		7
+
+/*
+ * Helper function to wait until divider(s) have stabilized after the divider
+ * value has changed.
+ */
+static void wait_until_divider_stable(void __iomem *div_reg, unsigned long mask)
+{
+	unsigned long timeout = jiffies + msecs_to_jiffies(10);
+
+	do {
+		if (!(readl(div_reg) & mask))
+			return;
+	} while (time_before(jiffies, timeout));
+
+	if (!(readl(div_reg) & mask))
+		return;
+
+	pr_err("%s: timeout in divider stablization\n", __func__);
+}
+
+/*
+ * Helper function to wait until mux has stabilized after the mux selection
+ * value was changed.
+ */
+static void wait_until_mux_stable(void __iomem *mux_reg, u32 mux_pos,
+					unsigned long mux_value)
+{
+	unsigned long timeout = jiffies + msecs_to_jiffies(10);
+
+	do {
+		if (((readl(mux_reg) >> mux_pos) & MUX_MASK) == mux_value)
+			return;
+	} while (time_before(jiffies, timeout));
+
+	if (((readl(mux_reg) >> mux_pos) & MUX_MASK) == mux_value)
+		return;
+
+	pr_err("%s: re-parenting mux timed-out\n", __func__);
+}
+
+/* common round rate callback useable for all types of CPU clocks */
+static long exynos_cpuclk_round_rate(struct clk_hw *hw,
+			unsigned long drate, unsigned long *prate)
+{
+	struct clk *parent = __clk_get_parent(hw->clk);
+	*prate = __clk_round_rate(parent, drate);
+	return *prate;
+}
+
+/* common recalc rate callback useable for all types of CPU clocks */
+static unsigned long exynos_cpuclk_recalc_rate(struct clk_hw *hw,
+			unsigned long parent_rate)
+{
+	/*
+	 * The CPU clock output (armclk) rate is the same as its parent
+	 * rate. Although there exist certain dividers inside the CPU
+	 * clock block that could be used to divide the parent clock,
+	 * the driver does not make use of them currently, except during
+	 * frequency transitions.
+	 */
+	return parent_rate;
+}
+
+static const struct clk_ops exynos_cpuclk_clk_ops = {
+	.recalc_rate = exynos_cpuclk_recalc_rate,
+	.round_rate = exynos_cpuclk_round_rate,
+};
+
+/*
+ * Helper function to set the 'safe' dividers for the CPU clock. The parameters
+ * div and mask contain the divider value and the register bit mask of the
+ * dividers to be programmed.
+ */
+static void exynos_set_safe_div(void __iomem *base, unsigned long div,
+					unsigned long mask)
+{
+	unsigned long div0;
+
+	div0 = readl(base + E4210_DIV_CPU0);
+	div0 = (div0 & ~mask) | (div & mask);
+	writel(div0, base + E4210_DIV_CPU0);
+	wait_until_divider_stable(base + E4210_DIV_STAT_CPU0, mask);
+}
+
+/* handler for pre-rate change notification from parent clock */
+static int exynos_cpuclk_pre_rate_change(struct clk_notifier_data *ndata,
+			struct exynos_cpuclk *cpuclk, void __iomem *base)
+{
+	const struct exynos_cpuclk_cfg_data *cfg_data = cpuclk->cfg;
+	unsigned long alt_prate = clk_get_rate(cpuclk->alt_parent);
+	unsigned long alt_div = 0, alt_div_mask = DIV_MASK;
+	unsigned long div0, div1 = 0, mux_reg;
+
+	/* find out the divider values to use for clock data */
+	while ((cfg_data->prate * 1000) != ndata->new_rate) {
+		if (cfg_data->prate == 0)
+			return -EINVAL;
+		cfg_data++;
+	}
+
+	spin_lock(cpuclk->lock);
+
+	/*
+	 * For the selected PLL clock frequency, get the pre-defined divider
+	 * values. If the clock for sclk_hpm is not sourced from apll, then
+	 * the values for DIV_COPY and DIV_HPM dividers need not be set.
+	 */
+	div0 = cfg_data->div0;
+	if (test_bit(CLK_CPU_HAS_DIV1, &cpuclk->flags)) {
+		div1 = cfg_data->div1;
+		if (readl(base + E4210_SRC_CPU) & E4210_MUX_HPM_MASK)
+			div1 = readl(base + E4210_DIV_CPU1) &
+				(E4210_DIV1_HPM_MASK | E4210_DIV1_COPY_MASK);
+	}
+
+	/*
+	 * If the old parent clock speed is less than the clock speed of
+	 * the alternate parent, then it should be ensured that at no point
+	 * the armclk speed is more than the old_prate until the dividers are
+	 * set.  Also workaround the issue of the dividers being set to lower
+	 * values before the parent clock speed is set to new lower speed
+	 * (this can result in too high speed of armclk output clocks).
+	 */
+	if (alt_prate > ndata->old_rate || ndata->old_rate > ndata->new_rate) {
+		unsigned long tmp_rate = min(ndata->old_rate, ndata->new_rate);
+
+		alt_div = DIV_ROUND_UP(alt_prate, tmp_rate) - 1;
+		WARN_ON(alt_div >= MAX_DIV);
+
+		if (test_bit(CLK_CPU_NEEDS_DEBUG_ALT_DIV, &cpuclk->flags)) {
+			/*
+			 * In Exynos4210, ATB clock parent is also mout_core. So
+			 * ATB clock also needs to be mantained at safe speed.
+			 */
+			alt_div |= E4210_DIV0_ATB_MASK;
+			alt_div_mask |= E4210_DIV0_ATB_MASK;
+		}
+		exynos_set_safe_div(base, alt_div, alt_div_mask);
+		div0 |= alt_div;
+	}
+
+	/* select sclk_mpll as the alternate parent */
+	mux_reg = readl(base + E4210_SRC_CPU);
+	writel(mux_reg | (1 << 16), base + E4210_SRC_CPU);
+	wait_until_mux_stable(base + E4210_STAT_CPU, 16, 2);
+
+	/* alternate parent is active now. set the dividers */
+	writel(div0, base + E4210_DIV_CPU0);
+	wait_until_divider_stable(base + E4210_DIV_STAT_CPU0, DIV_MASK_ALL);
+
+	if (test_bit(CLK_CPU_HAS_DIV1, &cpuclk->flags)) {
+		writel(div1, base + E4210_DIV_CPU1);
+		wait_until_divider_stable(base + E4210_DIV_STAT_CPU1,
+				DIV_MASK_ALL);
+	}
+
+	spin_unlock(cpuclk->lock);
+	return 0;
+}
+
+/* handler for post-rate change notification from parent clock */
+static int exynos_cpuclk_post_rate_change(struct clk_notifier_data *ndata,
+			struct exynos_cpuclk *cpuclk, void __iomem *base)
+{
+	const struct exynos_cpuclk_cfg_data *cfg_data = cpuclk->cfg;
+	unsigned long div = 0, div_mask = DIV_MASK;
+	unsigned long mux_reg;
+
+	/* find out the divider values to use for clock data */
+	if (test_bit(CLK_CPU_NEEDS_DEBUG_ALT_DIV, &cpuclk->flags)) {
+		while ((cfg_data->prate * 1000) != ndata->new_rate) {
+			if (cfg_data->prate == 0)
+				return -EINVAL;
+			cfg_data++;
+		}
+	}
+
+	spin_lock(cpuclk->lock);
+
+	/* select mout_apll as the alternate parent */
+	mux_reg = readl(base + E4210_SRC_CPU);
+	writel(mux_reg & ~(1 << 16), base + E4210_SRC_CPU);
+	wait_until_mux_stable(base + E4210_STAT_CPU, 16, 1);
+
+	if (test_bit(CLK_CPU_NEEDS_DEBUG_ALT_DIV, &cpuclk->flags)) {
+		div |= (cfg_data->div0 & E4210_DIV0_ATB_MASK);
+		div_mask |= E4210_DIV0_ATB_MASK;
+	}
+
+	exynos_set_safe_div(base, div, div_mask);
+	spin_unlock(cpuclk->lock);
+	return 0;
+}
+
+/*
+ * This notifier function is called for the pre-rate and post-rate change
+ * notifications of the parent clock of cpuclk.
+ */
+static int exynos_cpuclk_notifier_cb(struct notifier_block *nb,
+				unsigned long event, void *data)
+{
+	struct clk_notifier_data *ndata = data;
+	struct exynos_cpuclk *cpuclk;
+	void __iomem *base;
+	int err = 0;
+
+	cpuclk = container_of(nb, struct exynos_cpuclk, clk_nb);
+	base = cpuclk->ctrl_base;
+
+	if (event == PRE_RATE_CHANGE)
+		err = exynos_cpuclk_pre_rate_change(ndata, cpuclk, base);
+	else if (event == POST_RATE_CHANGE)
+		err = exynos_cpuclk_post_rate_change(ndata, cpuclk, base);
+
+	return notifier_from_errno(err);
+}
+
+/* helper function to register a CPU clock */
+int __init exynos_register_cpu_clock(struct samsung_clk_provider *ctx,
+		unsigned int lookup_id, const char *name, const char *parent,
+		const char *alt_parent, unsigned long offset,
+		const struct exynos_cpuclk_cfg_data *cfg,
+		unsigned long num_cfgs, unsigned long flags)
+{
+	struct exynos_cpuclk *cpuclk;
+	struct clk_init_data init;
+	struct clk *clk;
+	int ret = 0;
+
+	cpuclk = kzalloc(sizeof(*cpuclk), GFP_KERNEL);
+	if (!cpuclk)
+		return -ENOMEM;
+
+	init.name = name;
+	init.flags = CLK_SET_RATE_PARENT;
+	init.parent_names = &parent;
+	init.num_parents = 1;
+	init.ops = &exynos_cpuclk_clk_ops;
+
+	cpuclk->hw.init = &init;
+	cpuclk->ctrl_base = ctx->reg_base + offset;
+	cpuclk->lock = &ctx->lock;
+	cpuclk->flags = flags;
+	cpuclk->clk_nb.notifier_call = exynos_cpuclk_notifier_cb;
+
+	cpuclk->alt_parent = __clk_lookup(alt_parent);
+	if (!cpuclk->alt_parent) {
+		pr_err("%s: could not lookup alternate parent %s\n",
+				__func__, alt_parent);
+		ret = -EINVAL;
+		goto free_cpuclk;
+	}
+
+	clk = __clk_lookup(parent);
+	if (!clk) {
+		pr_err("%s: could not lookup parent clock %s\n",
+				__func__, parent);
+		ret = -EINVAL;
+		goto free_cpuclk;
+	}
+
+	ret = clk_notifier_register(clk, &cpuclk->clk_nb);
+	if (ret) {
+		pr_err("%s: failed to register clock notifier for %s\n",
+				__func__, name);
+		goto free_cpuclk;
+	}
+
+	cpuclk->cfg = kmemdup(cfg, sizeof(*cfg) * num_cfgs, GFP_KERNEL);
+	if (!cpuclk->cfg) {
+		pr_err("%s: could not allocate memory for cpuclk data\n",
+				__func__);
+		ret = -ENOMEM;
+		goto unregister_clk_nb;
+	}
+
+	clk = clk_register(NULL, &cpuclk->hw);
+	if (IS_ERR(clk)) {
+		pr_err("%s: could not register cpuclk %s\n", __func__,	name);
+		ret = PTR_ERR(clk);
+		goto free_cpuclk_data;
+	}
+
+	samsung_clk_add_lookup(ctx, clk, lookup_id);
+	return 0;
+
+free_cpuclk_data:
+	kfree(cpuclk->cfg);
+unregister_clk_nb:
+	clk_notifier_unregister(__clk_lookup(parent), &cpuclk->clk_nb);
+free_cpuclk:
+	kfree(cpuclk);
+	return ret;
+}