summaryrefslogtreecommitdiff
path: root/drivers/clk/ti/dpll3xxx.c
diff options
context:
space:
mode:
authorAndré Fabian Silva Delgado <emulatorman@parabola.nu>2015-12-15 14:52:16 -0300
committerAndré Fabian Silva Delgado <emulatorman@parabola.nu>2015-12-15 14:52:16 -0300
commit8d91c1e411f55d7ea91b1183a2e9f8088fb4d5be (patch)
treee9891aa6c295060d065adffd610c4f49ecf884f3 /drivers/clk/ti/dpll3xxx.c
parenta71852147516bc1cb5b0b3cbd13639bfd4022dc8 (diff)
Linux-libre 4.3.2-gnu
Diffstat (limited to 'drivers/clk/ti/dpll3xxx.c')
-rw-r--r--drivers/clk/ti/dpll3xxx.c817
1 files changed, 817 insertions, 0 deletions
diff --git a/drivers/clk/ti/dpll3xxx.c b/drivers/clk/ti/dpll3xxx.c
new file mode 100644
index 000000000..f4dec00fb
--- /dev/null
+++ b/drivers/clk/ti/dpll3xxx.c
@@ -0,0 +1,817 @@
+/*
+ * OMAP3/4 - specific DPLL control functions
+ *
+ * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ * Copyright (C) 2009-2010 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ * Testing and integration fixes by Jouni Högander
+ *
+ * 36xx support added by Vishwanath BS, Richard Woodruff, and Nishanth
+ * Menon
+ *
+ * Parts of this code are based on code written by
+ * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/bitops.h>
+#include <linux/clkdev.h>
+#include <linux/clk/ti.h>
+
+#include "clock.h"
+
+/* CM_AUTOIDLE_PLL*.AUTO_* bit values */
+#define DPLL_AUTOIDLE_DISABLE 0x0
+#define DPLL_AUTOIDLE_LOW_POWER_STOP 0x1
+
+#define MAX_DPLL_WAIT_TRIES 1000000
+
+#define OMAP3XXX_EN_DPLL_LOCKED 0x7
+
+/* Forward declarations */
+static u32 omap3_dpll_autoidle_read(struct clk_hw_omap *clk);
+static void omap3_dpll_deny_idle(struct clk_hw_omap *clk);
+static void omap3_dpll_allow_idle(struct clk_hw_omap *clk);
+
+/* Private functions */
+
+/* _omap3_dpll_write_clken - write clken_bits arg to a DPLL's enable bits */
+static void _omap3_dpll_write_clken(struct clk_hw_omap *clk, u8 clken_bits)
+{
+ const struct dpll_data *dd;
+ u32 v;
+
+ dd = clk->dpll_data;
+
+ v = ti_clk_ll_ops->clk_readl(dd->control_reg);
+ v &= ~dd->enable_mask;
+ v |= clken_bits << __ffs(dd->enable_mask);
+ ti_clk_ll_ops->clk_writel(v, dd->control_reg);
+}
+
+/* _omap3_wait_dpll_status: wait for a DPLL to enter a specific state */
+static int _omap3_wait_dpll_status(struct clk_hw_omap *clk, u8 state)
+{
+ const struct dpll_data *dd;
+ int i = 0;
+ int ret = -EINVAL;
+ const char *clk_name;
+
+ dd = clk->dpll_data;
+ clk_name = clk_hw_get_name(&clk->hw);
+
+ state <<= __ffs(dd->idlest_mask);
+
+ while (((ti_clk_ll_ops->clk_readl(dd->idlest_reg) & dd->idlest_mask)
+ != state) && i < MAX_DPLL_WAIT_TRIES) {
+ i++;
+ udelay(1);
+ }
+
+ if (i == MAX_DPLL_WAIT_TRIES) {
+ pr_err("clock: %s failed transition to '%s'\n",
+ clk_name, (state) ? "locked" : "bypassed");
+ } else {
+ pr_debug("clock: %s transition to '%s' in %d loops\n",
+ clk_name, (state) ? "locked" : "bypassed", i);
+
+ ret = 0;
+ }
+
+ return ret;
+}
+
+/* From 3430 TRM ES2 4.7.6.2 */
+static u16 _omap3_dpll_compute_freqsel(struct clk_hw_omap *clk, u8 n)
+{
+ unsigned long fint;
+ u16 f = 0;
+
+ fint = clk_get_rate(clk->dpll_data->clk_ref) / n;
+
+ pr_debug("clock: fint is %lu\n", fint);
+
+ if (fint >= 750000 && fint <= 1000000)
+ f = 0x3;
+ else if (fint > 1000000 && fint <= 1250000)
+ f = 0x4;
+ else if (fint > 1250000 && fint <= 1500000)
+ f = 0x5;
+ else if (fint > 1500000 && fint <= 1750000)
+ f = 0x6;
+ else if (fint > 1750000 && fint <= 2100000)
+ f = 0x7;
+ else if (fint > 7500000 && fint <= 10000000)
+ f = 0xB;
+ else if (fint > 10000000 && fint <= 12500000)
+ f = 0xC;
+ else if (fint > 12500000 && fint <= 15000000)
+ f = 0xD;
+ else if (fint > 15000000 && fint <= 17500000)
+ f = 0xE;
+ else if (fint > 17500000 && fint <= 21000000)
+ f = 0xF;
+ else
+ pr_debug("clock: unknown freqsel setting for %d\n", n);
+
+ return f;
+}
+
+/*
+ * _omap3_noncore_dpll_lock - instruct a DPLL to lock and wait for readiness
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to lock. Waits for the DPLL to report
+ * readiness before returning. Will save and restore the DPLL's
+ * autoidle state across the enable, per the CDP code. If the DPLL
+ * locked successfully, return 0; if the DPLL did not lock in the time
+ * allotted, or DPLL3 was passed in, return -EINVAL.
+ */
+static int _omap3_noncore_dpll_lock(struct clk_hw_omap *clk)
+{
+ const struct dpll_data *dd;
+ u8 ai;
+ u8 state = 1;
+ int r = 0;
+
+ pr_debug("clock: locking DPLL %s\n", clk_hw_get_name(&clk->hw));
+
+ dd = clk->dpll_data;
+ state <<= __ffs(dd->idlest_mask);
+
+ /* Check if already locked */
+ if ((ti_clk_ll_ops->clk_readl(dd->idlest_reg) & dd->idlest_mask) ==
+ state)
+ goto done;
+
+ ai = omap3_dpll_autoidle_read(clk);
+
+ if (ai)
+ omap3_dpll_deny_idle(clk);
+
+ _omap3_dpll_write_clken(clk, DPLL_LOCKED);
+
+ r = _omap3_wait_dpll_status(clk, 1);
+
+ if (ai)
+ omap3_dpll_allow_idle(clk);
+
+done:
+ return r;
+}
+
+/*
+ * _omap3_noncore_dpll_bypass - instruct a DPLL to bypass and wait for readiness
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to enter low-power bypass mode. In
+ * bypass mode, the DPLL's rate is set equal to its parent clock's
+ * rate. Waits for the DPLL to report readiness before returning.
+ * Will save and restore the DPLL's autoidle state across the enable,
+ * per the CDP code. If the DPLL entered bypass mode successfully,
+ * return 0; if the DPLL did not enter bypass in the time allotted, or
+ * DPLL3 was passed in, or the DPLL does not support low-power bypass,
+ * return -EINVAL.
+ */
+static int _omap3_noncore_dpll_bypass(struct clk_hw_omap *clk)
+{
+ int r;
+ u8 ai;
+
+ if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_BYPASS)))
+ return -EINVAL;
+
+ pr_debug("clock: configuring DPLL %s for low-power bypass\n",
+ clk_hw_get_name(&clk->hw));
+
+ ai = omap3_dpll_autoidle_read(clk);
+
+ _omap3_dpll_write_clken(clk, DPLL_LOW_POWER_BYPASS);
+
+ r = _omap3_wait_dpll_status(clk, 0);
+
+ if (ai)
+ omap3_dpll_allow_idle(clk);
+
+ return r;
+}
+
+/*
+ * _omap3_noncore_dpll_stop - instruct a DPLL to stop
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to enter low-power stop. Will save and
+ * restore the DPLL's autoidle state across the stop, per the CDP
+ * code. If DPLL3 was passed in, or the DPLL does not support
+ * low-power stop, return -EINVAL; otherwise, return 0.
+ */
+static int _omap3_noncore_dpll_stop(struct clk_hw_omap *clk)
+{
+ u8 ai;
+
+ if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_STOP)))
+ return -EINVAL;
+
+ pr_debug("clock: stopping DPLL %s\n", clk_hw_get_name(&clk->hw));
+
+ ai = omap3_dpll_autoidle_read(clk);
+
+ _omap3_dpll_write_clken(clk, DPLL_LOW_POWER_STOP);
+
+ if (ai)
+ omap3_dpll_allow_idle(clk);
+
+ return 0;
+}
+
+/**
+ * _lookup_dco - Lookup DCO used by j-type DPLL
+ * @clk: pointer to a DPLL struct clk
+ * @dco: digital control oscillator selector
+ * @m: DPLL multiplier to set
+ * @n: DPLL divider to set
+ *
+ * See 36xx TRM section 3.5.3.3.3.2 "Type B DPLL (Low-Jitter)"
+ *
+ * XXX This code is not needed for 3430/AM35xx; can it be optimized
+ * out in non-multi-OMAP builds for those chips?
+ */
+static void _lookup_dco(struct clk_hw_omap *clk, u8 *dco, u16 m, u8 n)
+{
+ unsigned long fint, clkinp; /* watch out for overflow */
+
+ clkinp = clk_hw_get_rate(clk_hw_get_parent(&clk->hw));
+ fint = (clkinp / n) * m;
+
+ if (fint < 1000000000)
+ *dco = 2;
+ else
+ *dco = 4;
+}
+
+/**
+ * _lookup_sddiv - Calculate sigma delta divider for j-type DPLL
+ * @clk: pointer to a DPLL struct clk
+ * @sd_div: target sigma-delta divider
+ * @m: DPLL multiplier to set
+ * @n: DPLL divider to set
+ *
+ * See 36xx TRM section 3.5.3.3.3.2 "Type B DPLL (Low-Jitter)"
+ *
+ * XXX This code is not needed for 3430/AM35xx; can it be optimized
+ * out in non-multi-OMAP builds for those chips?
+ */
+static void _lookup_sddiv(struct clk_hw_omap *clk, u8 *sd_div, u16 m, u8 n)
+{
+ unsigned long clkinp, sd; /* watch out for overflow */
+ int mod1, mod2;
+
+ clkinp = clk_hw_get_rate(clk_hw_get_parent(&clk->hw));
+
+ /*
+ * target sigma-delta to near 250MHz
+ * sd = ceil[(m/(n+1)) * (clkinp_MHz / 250)]
+ */
+ clkinp /= 100000; /* shift from MHz to 10*Hz for 38.4 and 19.2 */
+ mod1 = (clkinp * m) % (250 * n);
+ sd = (clkinp * m) / (250 * n);
+ mod2 = sd % 10;
+ sd /= 10;
+
+ if (mod1 || mod2)
+ sd++;
+ *sd_div = sd;
+}
+
+/*
+ * _omap3_noncore_dpll_program - set non-core DPLL M,N values directly
+ * @clk: struct clk * of DPLL to set
+ * @freqsel: FREQSEL value to set
+ *
+ * Program the DPLL with the last M, N values calculated, and wait for
+ * the DPLL to lock. Returns -EINVAL upon error, or 0 upon success.
+ */
+static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 freqsel)
+{
+ struct dpll_data *dd = clk->dpll_data;
+ u8 dco, sd_div;
+ u32 v;
+
+ /* 3430 ES2 TRM: 4.7.6.9 DPLL Programming Sequence */
+ _omap3_noncore_dpll_bypass(clk);
+
+ /*
+ * Set jitter correction. Jitter correction applicable for OMAP343X
+ * only since freqsel field is no longer present on other devices.
+ */
+ if (ti_clk_get_features()->flags & TI_CLK_DPLL_HAS_FREQSEL) {
+ v = ti_clk_ll_ops->clk_readl(dd->control_reg);
+ v &= ~dd->freqsel_mask;
+ v |= freqsel << __ffs(dd->freqsel_mask);
+ ti_clk_ll_ops->clk_writel(v, dd->control_reg);
+ }
+
+ /* Set DPLL multiplier, divider */
+ v = ti_clk_ll_ops->clk_readl(dd->mult_div1_reg);
+
+ /* Handle Duty Cycle Correction */
+ if (dd->dcc_mask) {
+ if (dd->last_rounded_rate >= dd->dcc_rate)
+ v |= dd->dcc_mask; /* Enable DCC */
+ else
+ v &= ~dd->dcc_mask; /* Disable DCC */
+ }
+
+ v &= ~(dd->mult_mask | dd->div1_mask);
+ v |= dd->last_rounded_m << __ffs(dd->mult_mask);
+ v |= (dd->last_rounded_n - 1) << __ffs(dd->div1_mask);
+
+ /* Configure dco and sd_div for dplls that have these fields */
+ if (dd->dco_mask) {
+ _lookup_dco(clk, &dco, dd->last_rounded_m, dd->last_rounded_n);
+ v &= ~(dd->dco_mask);
+ v |= dco << __ffs(dd->dco_mask);
+ }
+ if (dd->sddiv_mask) {
+ _lookup_sddiv(clk, &sd_div, dd->last_rounded_m,
+ dd->last_rounded_n);
+ v &= ~(dd->sddiv_mask);
+ v |= sd_div << __ffs(dd->sddiv_mask);
+ }
+
+ ti_clk_ll_ops->clk_writel(v, dd->mult_div1_reg);
+
+ /* Set 4X multiplier and low-power mode */
+ if (dd->m4xen_mask || dd->lpmode_mask) {
+ v = ti_clk_ll_ops->clk_readl(dd->control_reg);
+
+ if (dd->m4xen_mask) {
+ if (dd->last_rounded_m4xen)
+ v |= dd->m4xen_mask;
+ else
+ v &= ~dd->m4xen_mask;
+ }
+
+ if (dd->lpmode_mask) {
+ if (dd->last_rounded_lpmode)
+ v |= dd->lpmode_mask;
+ else
+ v &= ~dd->lpmode_mask;
+ }
+
+ ti_clk_ll_ops->clk_writel(v, dd->control_reg);
+ }
+
+ /* We let the clock framework set the other output dividers later */
+
+ /* REVISIT: Set ramp-up delay? */
+
+ _omap3_noncore_dpll_lock(clk);
+
+ return 0;
+}
+
+/* Public functions */
+
+/**
+ * omap3_dpll_recalc - recalculate DPLL rate
+ * @clk: DPLL struct clk
+ *
+ * Recalculate and propagate the DPLL rate.
+ */
+unsigned long omap3_dpll_recalc(struct clk_hw *hw, unsigned long parent_rate)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+
+ return omap2_get_dpll_rate(clk);
+}
+
+/* Non-CORE DPLL (e.g., DPLLs that do not control SDRC) clock functions */
+
+/**
+ * omap3_noncore_dpll_enable - instruct a DPLL to enter bypass or lock mode
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to enable, e.g., to enter bypass or lock.
+ * The choice of modes depends on the DPLL's programmed rate: if it is
+ * the same as the DPLL's parent clock, it will enter bypass;
+ * otherwise, it will enter lock. This code will wait for the DPLL to
+ * indicate readiness before returning, unless the DPLL takes too long
+ * to enter the target state. Intended to be used as the struct clk's
+ * enable function. If DPLL3 was passed in, or the DPLL does not
+ * support low-power stop, or if the DPLL took too long to enter
+ * bypass or lock, return -EINVAL; otherwise, return 0.
+ */
+int omap3_noncore_dpll_enable(struct clk_hw *hw)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+ int r;
+ struct dpll_data *dd;
+ struct clk_hw *parent;
+
+ dd = clk->dpll_data;
+ if (!dd)
+ return -EINVAL;
+
+ if (clk->clkdm) {
+ r = ti_clk_ll_ops->clkdm_clk_enable(clk->clkdm, hw->clk);
+ if (r) {
+ WARN(1,
+ "%s: could not enable %s's clockdomain %s: %d\n",
+ __func__, clk_hw_get_name(hw),
+ clk->clkdm_name, r);
+ return r;
+ }
+ }
+
+ parent = clk_hw_get_parent(hw);
+
+ if (clk_hw_get_rate(hw) == clk_get_rate(dd->clk_bypass)) {
+ WARN_ON(parent != __clk_get_hw(dd->clk_bypass));
+ r = _omap3_noncore_dpll_bypass(clk);
+ } else {
+ WARN_ON(parent != __clk_get_hw(dd->clk_ref));
+ r = _omap3_noncore_dpll_lock(clk);
+ }
+
+ return r;
+}
+
+/**
+ * omap3_noncore_dpll_disable - instruct a DPLL to enter low-power stop
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to enter low-power stop. This function is
+ * intended for use in struct clkops. No return value.
+ */
+void omap3_noncore_dpll_disable(struct clk_hw *hw)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+
+ _omap3_noncore_dpll_stop(clk);
+ if (clk->clkdm)
+ ti_clk_ll_ops->clkdm_clk_disable(clk->clkdm, hw->clk);
+}
+
+/* Non-CORE DPLL rate set code */
+
+/**
+ * omap3_noncore_dpll_determine_rate - determine rate for a DPLL
+ * @hw: pointer to the clock to determine rate for
+ * @req: target rate request
+ *
+ * Determines which DPLL mode to use for reaching a desired target rate.
+ * Checks whether the DPLL shall be in bypass or locked mode, and if
+ * locked, calculates the M,N values for the DPLL via round-rate.
+ * Returns a 0 on success, negative error value in failure.
+ */
+int omap3_noncore_dpll_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+ struct dpll_data *dd;
+
+ if (!req->rate)
+ return -EINVAL;
+
+ dd = clk->dpll_data;
+ if (!dd)
+ return -EINVAL;
+
+ if (clk_get_rate(dd->clk_bypass) == req->rate &&
+ (dd->modes & (1 << DPLL_LOW_POWER_BYPASS))) {
+ req->best_parent_hw = __clk_get_hw(dd->clk_bypass);
+ } else {
+ req->rate = omap2_dpll_round_rate(hw, req->rate,
+ &req->best_parent_rate);
+ req->best_parent_hw = __clk_get_hw(dd->clk_ref);
+ }
+
+ req->best_parent_rate = req->rate;
+
+ return 0;
+}
+
+/**
+ * omap3_noncore_dpll_set_parent - set parent for a DPLL clock
+ * @hw: pointer to the clock to set parent for
+ * @index: parent index to select
+ *
+ * Sets parent for a DPLL clock. This sets the DPLL into bypass or
+ * locked mode. Returns 0 with success, negative error value otherwise.
+ */
+int omap3_noncore_dpll_set_parent(struct clk_hw *hw, u8 index)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+ int ret;
+
+ if (!hw)
+ return -EINVAL;
+
+ if (index)
+ ret = _omap3_noncore_dpll_bypass(clk);
+ else
+ ret = _omap3_noncore_dpll_lock(clk);
+
+ return ret;
+}
+
+/**
+ * omap3_noncore_dpll_set_rate - set rate for a DPLL clock
+ * @hw: pointer to the clock to set parent for
+ * @rate: target rate for the clock
+ * @parent_rate: rate of the parent clock
+ *
+ * Sets rate for a DPLL clock. First checks if the clock parent is
+ * reference clock (in bypass mode, the rate of the clock can't be
+ * changed) and proceeds with the rate change operation. Returns 0
+ * with success, negative error value otherwise.
+ */
+int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+ struct dpll_data *dd;
+ u16 freqsel = 0;
+ int ret;
+
+ if (!hw || !rate)
+ return -EINVAL;
+
+ dd = clk->dpll_data;
+ if (!dd)
+ return -EINVAL;
+
+ if (clk_hw_get_parent(hw) != __clk_get_hw(dd->clk_ref))
+ return -EINVAL;
+
+ if (dd->last_rounded_rate == 0)
+ return -EINVAL;
+
+ /* Freqsel is available only on OMAP343X devices */
+ if (ti_clk_get_features()->flags & TI_CLK_DPLL_HAS_FREQSEL) {
+ freqsel = _omap3_dpll_compute_freqsel(clk, dd->last_rounded_n);
+ WARN_ON(!freqsel);
+ }
+
+ pr_debug("%s: %s: set rate: locking rate to %lu.\n", __func__,
+ clk_hw_get_name(hw), rate);
+
+ ret = omap3_noncore_dpll_program(clk, freqsel);
+
+ return ret;
+}
+
+/**
+ * omap3_noncore_dpll_set_rate_and_parent - set rate and parent for a DPLL clock
+ * @hw: pointer to the clock to set rate and parent for
+ * @rate: target rate for the DPLL
+ * @parent_rate: clock rate of the DPLL parent
+ * @index: new parent index for the DPLL, 0 - reference, 1 - bypass
+ *
+ * Sets rate and parent for a DPLL clock. If new parent is the bypass
+ * clock, only selects the parent. Otherwise proceeds with a rate
+ * change, as this will effectively also change the parent as the
+ * DPLL is put into locked mode. Returns 0 with success, negative error
+ * value otherwise.
+ */
+int omap3_noncore_dpll_set_rate_and_parent(struct clk_hw *hw,
+ unsigned long rate,
+ unsigned long parent_rate,
+ u8 index)
+{
+ int ret;
+
+ if (!hw || !rate)
+ return -EINVAL;
+
+ /*
+ * clk-ref at index[0], in which case we only need to set rate,
+ * the parent will be changed automatically with the lock sequence.
+ * With clk-bypass case we only need to change parent.
+ */
+ if (index)
+ ret = omap3_noncore_dpll_set_parent(hw, index);
+ else
+ ret = omap3_noncore_dpll_set_rate(hw, rate, parent_rate);
+
+ return ret;
+}
+
+/* DPLL autoidle read/set code */
+
+/**
+ * omap3_dpll_autoidle_read - read a DPLL's autoidle bits
+ * @clk: struct clk * of the DPLL to read
+ *
+ * Return the DPLL's autoidle bits, shifted down to bit 0. Returns
+ * -EINVAL if passed a null pointer or if the struct clk does not
+ * appear to refer to a DPLL.
+ */
+static u32 omap3_dpll_autoidle_read(struct clk_hw_omap *clk)
+{
+ const struct dpll_data *dd;
+ u32 v;
+
+ if (!clk || !clk->dpll_data)
+ return -EINVAL;
+
+ dd = clk->dpll_data;
+
+ if (!dd->autoidle_reg)
+ return -EINVAL;
+
+ v = ti_clk_ll_ops->clk_readl(dd->autoidle_reg);
+ v &= dd->autoidle_mask;
+ v >>= __ffs(dd->autoidle_mask);
+
+ return v;
+}
+
+/**
+ * omap3_dpll_allow_idle - enable DPLL autoidle bits
+ * @clk: struct clk * of the DPLL to operate on
+ *
+ * Enable DPLL automatic idle control. This automatic idle mode
+ * switching takes effect only when the DPLL is locked, at least on
+ * OMAP3430. The DPLL will enter low-power stop when its downstream
+ * clocks are gated. No return value.
+ */
+static void omap3_dpll_allow_idle(struct clk_hw_omap *clk)
+{
+ const struct dpll_data *dd;
+ u32 v;
+
+ if (!clk || !clk->dpll_data)
+ return;
+
+ dd = clk->dpll_data;
+
+ if (!dd->autoidle_reg)
+ return;
+
+ /*
+ * REVISIT: CORE DPLL can optionally enter low-power bypass
+ * by writing 0x5 instead of 0x1. Add some mechanism to
+ * optionally enter this mode.
+ */
+ v = ti_clk_ll_ops->clk_readl(dd->autoidle_reg);
+ v &= ~dd->autoidle_mask;
+ v |= DPLL_AUTOIDLE_LOW_POWER_STOP << __ffs(dd->autoidle_mask);
+ ti_clk_ll_ops->clk_writel(v, dd->autoidle_reg);
+}
+
+/**
+ * omap3_dpll_deny_idle - prevent DPLL from automatically idling
+ * @clk: struct clk * of the DPLL to operate on
+ *
+ * Disable DPLL automatic idle control. No return value.
+ */
+static void omap3_dpll_deny_idle(struct clk_hw_omap *clk)
+{
+ const struct dpll_data *dd;
+ u32 v;
+
+ if (!clk || !clk->dpll_data)
+ return;
+
+ dd = clk->dpll_data;
+
+ if (!dd->autoidle_reg)
+ return;
+
+ v = ti_clk_ll_ops->clk_readl(dd->autoidle_reg);
+ v &= ~dd->autoidle_mask;
+ v |= DPLL_AUTOIDLE_DISABLE << __ffs(dd->autoidle_mask);
+ ti_clk_ll_ops->clk_writel(v, dd->autoidle_reg);
+}
+
+/* Clock control for DPLL outputs */
+
+/* Find the parent DPLL for the given clkoutx2 clock */
+static struct clk_hw_omap *omap3_find_clkoutx2_dpll(struct clk_hw *hw)
+{
+ struct clk_hw_omap *pclk = NULL;
+
+ /* Walk up the parents of clk, looking for a DPLL */
+ do {
+ do {
+ hw = clk_hw_get_parent(hw);
+ } while (hw && (clk_hw_get_flags(hw) & CLK_IS_BASIC));
+ if (!hw)
+ break;
+ pclk = to_clk_hw_omap(hw);
+ } while (pclk && !pclk->dpll_data);
+
+ /* clk does not have a DPLL as a parent? error in the clock data */
+ if (!pclk) {
+ WARN_ON(1);
+ return NULL;
+ }
+
+ return pclk;
+}
+
+/**
+ * omap3_clkoutx2_recalc - recalculate DPLL X2 output virtual clock rate
+ * @clk: DPLL output struct clk
+ *
+ * Using parent clock DPLL data, look up DPLL state. If locked, set our
+ * rate to the dpll_clk * 2; otherwise, just use dpll_clk.
+ */
+unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ const struct dpll_data *dd;
+ unsigned long rate;
+ u32 v;
+ struct clk_hw_omap *pclk = NULL;
+
+ if (!parent_rate)
+ return 0;
+
+ pclk = omap3_find_clkoutx2_dpll(hw);
+
+ if (!pclk)
+ return 0;
+
+ dd = pclk->dpll_data;
+
+ WARN_ON(!dd->enable_mask);
+
+ v = ti_clk_ll_ops->clk_readl(dd->control_reg) & dd->enable_mask;
+ v >>= __ffs(dd->enable_mask);
+ if ((v != OMAP3XXX_EN_DPLL_LOCKED) || (dd->flags & DPLL_J_TYPE))
+ rate = parent_rate;
+ else
+ rate = parent_rate * 2;
+ return rate;
+}
+
+/* OMAP3/4 non-CORE DPLL clkops */
+const struct clk_hw_omap_ops clkhwops_omap3_dpll = {
+ .allow_idle = omap3_dpll_allow_idle,
+ .deny_idle = omap3_dpll_deny_idle,
+};
+
+/**
+ * omap3_dpll4_set_rate - set rate for omap3 per-dpll
+ * @hw: clock to change
+ * @rate: target rate for clock
+ * @parent_rate: rate of the parent clock
+ *
+ * Check if the current SoC supports the per-dpll reprogram operation
+ * or not, and then do the rate change if supported. Returns -EINVAL
+ * if not supported, 0 for success, and potential error codes from the
+ * clock rate change.
+ */
+int omap3_dpll4_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ /*
+ * According to the 12-5 CDP code from TI, "Limitation 2.5"
+ * on 3430ES1 prevents us from changing DPLL multipliers or dividers
+ * on DPLL4.
+ */
+ if (ti_clk_get_features()->flags & TI_CLK_DPLL4_DENY_REPROGRAM) {
+ pr_err("clock: DPLL4 cannot change rate due to silicon 'Limitation 2.5' on 3430ES1.\n");
+ return -EINVAL;
+ }
+
+ return omap3_noncore_dpll_set_rate(hw, rate, parent_rate);
+}
+
+/**
+ * omap3_dpll4_set_rate_and_parent - set rate and parent for omap3 per-dpll
+ * @hw: clock to change
+ * @rate: target rate for clock
+ * @parent_rate: rate of the parent clock
+ * @index: parent index, 0 - reference clock, 1 - bypass clock
+ *
+ * Check if the current SoC support the per-dpll reprogram operation
+ * or not, and then do the rate + parent change if supported. Returns
+ * -EINVAL if not supported, 0 for success, and potential error codes
+ * from the clock rate change.
+ */
+int omap3_dpll4_set_rate_and_parent(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate, u8 index)
+{
+ if (ti_clk_get_features()->flags & TI_CLK_DPLL4_DENY_REPROGRAM) {
+ pr_err("clock: DPLL4 cannot change rate due to silicon 'Limitation 2.5' on 3430ES1.\n");
+ return -EINVAL;
+ }
+
+ return omap3_noncore_dpll_set_rate_and_parent(hw, rate, parent_rate,
+ index);
+}