Linux-libre 4.3.2-gnu

1 files changed, 817 insertions, 0 deletions

diff --git a/drivers/clk/ti/dpll3xxx.c b/drivers/clk/ti/dpll3xxx.c
new file mode 100644
index 000000000..f4dec00fb
--- /dev/null
+++ b/drivers/clk/ti/dpll3xxx.c
@@ -0,0 +1,817 @@
+/*
+ * OMAP3/4 - specific DPLL control functions
+ *
+ * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ * Copyright (C) 2009-2010 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ * Testing and integration fixes by Jouni Högander
+ *
+ * 36xx support added by Vishwanath BS, Richard Woodruff, and Nishanth
+ * Menon
+ *
+ * Parts of this code are based on code written by
+ * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/bitops.h>
+#include <linux/clkdev.h>
+#include <linux/clk/ti.h>
+
+#include "clock.h"
+
+/* CM_AUTOIDLE_PLL*.AUTO_* bit values */
+#define DPLL_AUTOIDLE_DISABLE			0x0
+#define DPLL_AUTOIDLE_LOW_POWER_STOP		0x1
+
+#define MAX_DPLL_WAIT_TRIES		1000000
+
+#define OMAP3XXX_EN_DPLL_LOCKED		0x7
+
+/* Forward declarations */
+static u32 omap3_dpll_autoidle_read(struct clk_hw_omap *clk);
+static void omap3_dpll_deny_idle(struct clk_hw_omap *clk);
+static void omap3_dpll_allow_idle(struct clk_hw_omap *clk);
+
+/* Private functions */
+
+/* _omap3_dpll_write_clken - write clken_bits arg to a DPLL's enable bits */
+static void _omap3_dpll_write_clken(struct clk_hw_omap *clk, u8 clken_bits)
+{
+	const struct dpll_data *dd;
+	u32 v;
+
+	dd = clk->dpll_data;
+
+	v = ti_clk_ll_ops->clk_readl(dd->control_reg);
+	v &= ~dd->enable_mask;
+	v |= clken_bits << __ffs(dd->enable_mask);
+	ti_clk_ll_ops->clk_writel(v, dd->control_reg);
+}
+
+/* _omap3_wait_dpll_status: wait for a DPLL to enter a specific state */
+static int _omap3_wait_dpll_status(struct clk_hw_omap *clk, u8 state)
+{
+	const struct dpll_data *dd;
+	int i = 0;
+	int ret = -EINVAL;
+	const char *clk_name;
+
+	dd = clk->dpll_data;
+	clk_name = clk_hw_get_name(&clk->hw);
+
+	state <<= __ffs(dd->idlest_mask);
+
+	while (((ti_clk_ll_ops->clk_readl(dd->idlest_reg) & dd->idlest_mask)
+		!= state) && i < MAX_DPLL_WAIT_TRIES) {
+		i++;
+		udelay(1);
+	}
+
+	if (i == MAX_DPLL_WAIT_TRIES) {
+		pr_err("clock: %s failed transition to '%s'\n",
+		       clk_name, (state) ? "locked" : "bypassed");
+	} else {
+		pr_debug("clock: %s transition to '%s' in %d loops\n",
+			 clk_name, (state) ? "locked" : "bypassed", i);
+
+		ret = 0;
+	}
+
+	return ret;
+}
+
+/* From 3430 TRM ES2 4.7.6.2 */
+static u16 _omap3_dpll_compute_freqsel(struct clk_hw_omap *clk, u8 n)
+{
+	unsigned long fint;
+	u16 f = 0;
+
+	fint = clk_get_rate(clk->dpll_data->clk_ref) / n;
+
+	pr_debug("clock: fint is %lu\n", fint);
+
+	if (fint >= 750000 && fint <= 1000000)
+		f = 0x3;
+	else if (fint > 1000000 && fint <= 1250000)
+		f = 0x4;
+	else if (fint > 1250000 && fint <= 1500000)
+		f = 0x5;
+	else if (fint > 1500000 && fint <= 1750000)
+		f = 0x6;
+	else if (fint > 1750000 && fint <= 2100000)
+		f = 0x7;
+	else if (fint > 7500000 && fint <= 10000000)
+		f = 0xB;
+	else if (fint > 10000000 && fint <= 12500000)
+		f = 0xC;
+	else if (fint > 12500000 && fint <= 15000000)
+		f = 0xD;
+	else if (fint > 15000000 && fint <= 17500000)
+		f = 0xE;
+	else if (fint > 17500000 && fint <= 21000000)
+		f = 0xF;
+	else
+		pr_debug("clock: unknown freqsel setting for %d\n", n);
+
+	return f;
+}
+
+/*
+ * _omap3_noncore_dpll_lock - instruct a DPLL to lock and wait for readiness
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to lock.  Waits for the DPLL to report
+ * readiness before returning.  Will save and restore the DPLL's
+ * autoidle state across the enable, per the CDP code.  If the DPLL
+ * locked successfully, return 0; if the DPLL did not lock in the time
+ * allotted, or DPLL3 was passed in, return -EINVAL.
+ */
+static int _omap3_noncore_dpll_lock(struct clk_hw_omap *clk)
+{
+	const struct dpll_data *dd;
+	u8 ai;
+	u8 state = 1;
+	int r = 0;
+
+	pr_debug("clock: locking DPLL %s\n", clk_hw_get_name(&clk->hw));
+
+	dd = clk->dpll_data;
+	state <<= __ffs(dd->idlest_mask);
+
+	/* Check if already locked */
+	if ((ti_clk_ll_ops->clk_readl(dd->idlest_reg) & dd->idlest_mask) ==
+	    state)
+		goto done;
+
+	ai = omap3_dpll_autoidle_read(clk);
+
+	if (ai)
+		omap3_dpll_deny_idle(clk);
+
+	_omap3_dpll_write_clken(clk, DPLL_LOCKED);
+
+	r = _omap3_wait_dpll_status(clk, 1);
+
+	if (ai)
+		omap3_dpll_allow_idle(clk);
+
+done:
+	return r;
+}
+
+/*
+ * _omap3_noncore_dpll_bypass - instruct a DPLL to bypass and wait for readiness
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to enter low-power bypass mode.  In
+ * bypass mode, the DPLL's rate is set equal to its parent clock's
+ * rate.  Waits for the DPLL to report readiness before returning.
+ * Will save and restore the DPLL's autoidle state across the enable,
+ * per the CDP code.  If the DPLL entered bypass mode successfully,
+ * return 0; if the DPLL did not enter bypass in the time allotted, or
+ * DPLL3 was passed in, or the DPLL does not support low-power bypass,
+ * return -EINVAL.
+ */
+static int _omap3_noncore_dpll_bypass(struct clk_hw_omap *clk)
+{
+	int r;
+	u8 ai;
+
+	if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_BYPASS)))
+		return -EINVAL;
+
+	pr_debug("clock: configuring DPLL %s for low-power bypass\n",
+		 clk_hw_get_name(&clk->hw));
+
+	ai = omap3_dpll_autoidle_read(clk);
+
+	_omap3_dpll_write_clken(clk, DPLL_LOW_POWER_BYPASS);
+
+	r = _omap3_wait_dpll_status(clk, 0);
+
+	if (ai)
+		omap3_dpll_allow_idle(clk);
+
+	return r;
+}
+
+/*
+ * _omap3_noncore_dpll_stop - instruct a DPLL to stop
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to enter low-power stop. Will save and
+ * restore the DPLL's autoidle state across the stop, per the CDP
+ * code.  If DPLL3 was passed in, or the DPLL does not support
+ * low-power stop, return -EINVAL; otherwise, return 0.
+ */
+static int _omap3_noncore_dpll_stop(struct clk_hw_omap *clk)
+{
+	u8 ai;
+
+	if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_STOP)))
+		return -EINVAL;
+
+	pr_debug("clock: stopping DPLL %s\n", clk_hw_get_name(&clk->hw));
+
+	ai = omap3_dpll_autoidle_read(clk);
+
+	_omap3_dpll_write_clken(clk, DPLL_LOW_POWER_STOP);
+
+	if (ai)
+		omap3_dpll_allow_idle(clk);
+
+	return 0;
+}
+
+/**
+ * _lookup_dco - Lookup DCO used by j-type DPLL
+ * @clk: pointer to a DPLL struct clk
+ * @dco: digital control oscillator selector
+ * @m: DPLL multiplier to set
+ * @n: DPLL divider to set
+ *
+ * See 36xx TRM section 3.5.3.3.3.2 "Type B DPLL (Low-Jitter)"
+ *
+ * XXX This code is not needed for 3430/AM35xx; can it be optimized
+ * out in non-multi-OMAP builds for those chips?
+ */
+static void _lookup_dco(struct clk_hw_omap *clk, u8 *dco, u16 m, u8 n)
+{
+	unsigned long fint, clkinp; /* watch out for overflow */
+
+	clkinp = clk_hw_get_rate(clk_hw_get_parent(&clk->hw));
+	fint = (clkinp / n) * m;
+
+	if (fint < 1000000000)
+		*dco = 2;
+	else
+		*dco = 4;
+}
+
+/**
+ * _lookup_sddiv - Calculate sigma delta divider for j-type DPLL
+ * @clk: pointer to a DPLL struct clk
+ * @sd_div: target sigma-delta divider
+ * @m: DPLL multiplier to set
+ * @n: DPLL divider to set
+ *
+ * See 36xx TRM section 3.5.3.3.3.2 "Type B DPLL (Low-Jitter)"
+ *
+ * XXX This code is not needed for 3430/AM35xx; can it be optimized
+ * out in non-multi-OMAP builds for those chips?
+ */
+static void _lookup_sddiv(struct clk_hw_omap *clk, u8 *sd_div, u16 m, u8 n)
+{
+	unsigned long clkinp, sd; /* watch out for overflow */
+	int mod1, mod2;
+
+	clkinp = clk_hw_get_rate(clk_hw_get_parent(&clk->hw));
+
+	/*
+	 * target sigma-delta to near 250MHz
+	 * sd = ceil[(m/(n+1)) * (clkinp_MHz / 250)]
+	 */
+	clkinp /= 100000; /* shift from MHz to 10*Hz for 38.4 and 19.2 */
+	mod1 = (clkinp * m) % (250 * n);
+	sd = (clkinp * m) / (250 * n);
+	mod2 = sd % 10;
+	sd /= 10;
+
+	if (mod1 || mod2)
+		sd++;
+	*sd_div = sd;
+}
+
+/*
+ * _omap3_noncore_dpll_program - set non-core DPLL M,N values directly
+ * @clk:	struct clk * of DPLL to set
+ * @freqsel:	FREQSEL value to set
+ *
+ * Program the DPLL with the last M, N values calculated, and wait for
+ * the DPLL to lock. Returns -EINVAL upon error, or 0 upon success.
+ */
+static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 freqsel)
+{
+	struct dpll_data *dd = clk->dpll_data;
+	u8 dco, sd_div;
+	u32 v;
+
+	/* 3430 ES2 TRM: 4.7.6.9 DPLL Programming Sequence */
+	_omap3_noncore_dpll_bypass(clk);
+
+	/*
+	 * Set jitter correction. Jitter correction applicable for OMAP343X
+	 * only since freqsel field is no longer present on other devices.
+	 */
+	if (ti_clk_get_features()->flags & TI_CLK_DPLL_HAS_FREQSEL) {
+		v = ti_clk_ll_ops->clk_readl(dd->control_reg);
+		v &= ~dd->freqsel_mask;
+		v |= freqsel << __ffs(dd->freqsel_mask);
+		ti_clk_ll_ops->clk_writel(v, dd->control_reg);
+	}
+
+	/* Set DPLL multiplier, divider */
+	v = ti_clk_ll_ops->clk_readl(dd->mult_div1_reg);
+
+	/* Handle Duty Cycle Correction */
+	if (dd->dcc_mask) {
+		if (dd->last_rounded_rate >= dd->dcc_rate)
+			v |= dd->dcc_mask; /* Enable DCC */
+		else
+			v &= ~dd->dcc_mask; /* Disable DCC */
+	}
+
+	v &= ~(dd->mult_mask | dd->div1_mask);
+	v |= dd->last_rounded_m << __ffs(dd->mult_mask);
+	v |= (dd->last_rounded_n - 1) << __ffs(dd->div1_mask);
+
+	/* Configure dco and sd_div for dplls that have these fields */
+	if (dd->dco_mask) {
+		_lookup_dco(clk, &dco, dd->last_rounded_m, dd->last_rounded_n);
+		v &= ~(dd->dco_mask);
+		v |= dco << __ffs(dd->dco_mask);
+	}
+	if (dd->sddiv_mask) {
+		_lookup_sddiv(clk, &sd_div, dd->last_rounded_m,
+			      dd->last_rounded_n);
+		v &= ~(dd->sddiv_mask);
+		v |= sd_div << __ffs(dd->sddiv_mask);
+	}
+
+	ti_clk_ll_ops->clk_writel(v, dd->mult_div1_reg);
+
+	/* Set 4X multiplier and low-power mode */
+	if (dd->m4xen_mask || dd->lpmode_mask) {
+		v = ti_clk_ll_ops->clk_readl(dd->control_reg);
+
+		if (dd->m4xen_mask) {
+			if (dd->last_rounded_m4xen)
+				v |= dd->m4xen_mask;
+			else
+				v &= ~dd->m4xen_mask;
+		}
+
+		if (dd->lpmode_mask) {
+			if (dd->last_rounded_lpmode)
+				v |= dd->lpmode_mask;
+			else
+				v &= ~dd->lpmode_mask;
+		}
+
+		ti_clk_ll_ops->clk_writel(v, dd->control_reg);
+	}
+
+	/* We let the clock framework set the other output dividers later */
+
+	/* REVISIT: Set ramp-up delay? */
+
+	_omap3_noncore_dpll_lock(clk);
+
+	return 0;
+}
+
+/* Public functions */
+
+/**
+ * omap3_dpll_recalc - recalculate DPLL rate
+ * @clk: DPLL struct clk
+ *
+ * Recalculate and propagate the DPLL rate.
+ */
+unsigned long omap3_dpll_recalc(struct clk_hw *hw, unsigned long parent_rate)
+{
+	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+
+	return omap2_get_dpll_rate(clk);
+}
+
+/* Non-CORE DPLL (e.g., DPLLs that do not control SDRC) clock functions */
+
+/**
+ * omap3_noncore_dpll_enable - instruct a DPLL to enter bypass or lock mode
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to enable, e.g., to enter bypass or lock.
+ * The choice of modes depends on the DPLL's programmed rate: if it is
+ * the same as the DPLL's parent clock, it will enter bypass;
+ * otherwise, it will enter lock.  This code will wait for the DPLL to
+ * indicate readiness before returning, unless the DPLL takes too long
+ * to enter the target state.  Intended to be used as the struct clk's
+ * enable function.  If DPLL3 was passed in, or the DPLL does not
+ * support low-power stop, or if the DPLL took too long to enter
+ * bypass or lock, return -EINVAL; otherwise, return 0.
+ */
+int omap3_noncore_dpll_enable(struct clk_hw *hw)
+{
+	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+	int r;
+	struct dpll_data *dd;
+	struct clk_hw *parent;
+
+	dd = clk->dpll_data;
+	if (!dd)
+		return -EINVAL;
+
+	if (clk->clkdm) {
+		r = ti_clk_ll_ops->clkdm_clk_enable(clk->clkdm, hw->clk);
+		if (r) {
+			WARN(1,
+			     "%s: could not enable %s's clockdomain %s: %d\n",
+			     __func__, clk_hw_get_name(hw),
+			     clk->clkdm_name, r);
+			return r;
+		}
+	}
+
+	parent = clk_hw_get_parent(hw);
+
+	if (clk_hw_get_rate(hw) == clk_get_rate(dd->clk_bypass)) {
+		WARN_ON(parent != __clk_get_hw(dd->clk_bypass));
+		r = _omap3_noncore_dpll_bypass(clk);
+	} else {
+		WARN_ON(parent != __clk_get_hw(dd->clk_ref));
+		r = _omap3_noncore_dpll_lock(clk);
+	}
+
+	return r;
+}
+
+/**
+ * omap3_noncore_dpll_disable - instruct a DPLL to enter low-power stop
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to enter low-power stop.  This function is
+ * intended for use in struct clkops.  No return value.
+ */
+void omap3_noncore_dpll_disable(struct clk_hw *hw)
+{
+	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+
+	_omap3_noncore_dpll_stop(clk);
+	if (clk->clkdm)
+		ti_clk_ll_ops->clkdm_clk_disable(clk->clkdm, hw->clk);
+}
+
+/* Non-CORE DPLL rate set code */
+
+/**
+ * omap3_noncore_dpll_determine_rate - determine rate for a DPLL
+ * @hw: pointer to the clock to determine rate for
+ * @req: target rate request
+ *
+ * Determines which DPLL mode to use for reaching a desired target rate.
+ * Checks whether the DPLL shall be in bypass or locked mode, and if
+ * locked, calculates the M,N values for the DPLL via round-rate.
+ * Returns a 0 on success, negative error value in failure.
+ */
+int omap3_noncore_dpll_determine_rate(struct clk_hw *hw,
+				      struct clk_rate_request *req)
+{
+	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+	struct dpll_data *dd;
+
+	if (!req->rate)
+		return -EINVAL;
+
+	dd = clk->dpll_data;
+	if (!dd)
+		return -EINVAL;
+
+	if (clk_get_rate(dd->clk_bypass) == req->rate &&
+	    (dd->modes & (1 << DPLL_LOW_POWER_BYPASS))) {
+		req->best_parent_hw = __clk_get_hw(dd->clk_bypass);
+	} else {
+		req->rate = omap2_dpll_round_rate(hw, req->rate,
+					  &req->best_parent_rate);
+		req->best_parent_hw = __clk_get_hw(dd->clk_ref);
+	}
+
+	req->best_parent_rate = req->rate;
+
+	return 0;
+}
+
+/**
+ * omap3_noncore_dpll_set_parent - set parent for a DPLL clock
+ * @hw: pointer to the clock to set parent for
+ * @index: parent index to select
+ *
+ * Sets parent for a DPLL clock. This sets the DPLL into bypass or
+ * locked mode. Returns 0 with success, negative error value otherwise.
+ */
+int omap3_noncore_dpll_set_parent(struct clk_hw *hw, u8 index)
+{
+	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+	int ret;
+
+	if (!hw)
+		return -EINVAL;
+
+	if (index)
+		ret = _omap3_noncore_dpll_bypass(clk);
+	else
+		ret = _omap3_noncore_dpll_lock(clk);
+
+	return ret;
+}
+
+/**
+ * omap3_noncore_dpll_set_rate - set rate for a DPLL clock
+ * @hw: pointer to the clock to set parent for
+ * @rate: target rate for the clock
+ * @parent_rate: rate of the parent clock
+ *
+ * Sets rate for a DPLL clock. First checks if the clock parent is
+ * reference clock (in bypass mode, the rate of the clock can't be
+ * changed) and proceeds with the rate change operation. Returns 0
+ * with success, negative error value otherwise.
+ */
+int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long parent_rate)
+{
+	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+	struct dpll_data *dd;
+	u16 freqsel = 0;
+	int ret;
+
+	if (!hw || !rate)
+		return -EINVAL;
+
+	dd = clk->dpll_data;
+	if (!dd)
+		return -EINVAL;
+
+	if (clk_hw_get_parent(hw) != __clk_get_hw(dd->clk_ref))
+		return -EINVAL;
+
+	if (dd->last_rounded_rate == 0)
+		return -EINVAL;
+
+	/* Freqsel is available only on OMAP343X devices */
+	if (ti_clk_get_features()->flags & TI_CLK_DPLL_HAS_FREQSEL) {
+		freqsel = _omap3_dpll_compute_freqsel(clk, dd->last_rounded_n);
+		WARN_ON(!freqsel);
+	}
+
+	pr_debug("%s: %s: set rate: locking rate to %lu.\n", __func__,
+		 clk_hw_get_name(hw), rate);
+
+	ret = omap3_noncore_dpll_program(clk, freqsel);
+
+	return ret;
+}
+
+/**
+ * omap3_noncore_dpll_set_rate_and_parent - set rate and parent for a DPLL clock
+ * @hw: pointer to the clock to set rate and parent for
+ * @rate: target rate for the DPLL
+ * @parent_rate: clock rate of the DPLL parent
+ * @index: new parent index for the DPLL, 0 - reference, 1 - bypass
+ *
+ * Sets rate and parent for a DPLL clock. If new parent is the bypass
+ * clock, only selects the parent. Otherwise proceeds with a rate
+ * change, as this will effectively also change the parent as the
+ * DPLL is put into locked mode. Returns 0 with success, negative error
+ * value otherwise.
+ */
+int omap3_noncore_dpll_set_rate_and_parent(struct clk_hw *hw,
+					   unsigned long rate,
+					   unsigned long parent_rate,
+					   u8 index)
+{
+	int ret;
+
+	if (!hw || !rate)
+		return -EINVAL;
+
+	/*
+	 * clk-ref at index[0], in which case we only need to set rate,
+	 * the parent will be changed automatically with the lock sequence.
+	 * With clk-bypass case we only need to change parent.
+	 */
+	if (index)
+		ret = omap3_noncore_dpll_set_parent(hw, index);
+	else
+		ret = omap3_noncore_dpll_set_rate(hw, rate, parent_rate);
+
+	return ret;
+}
+
+/* DPLL autoidle read/set code */
+
+/**
+ * omap3_dpll_autoidle_read - read a DPLL's autoidle bits
+ * @clk: struct clk * of the DPLL to read
+ *
+ * Return the DPLL's autoidle bits, shifted down to bit 0.  Returns
+ * -EINVAL if passed a null pointer or if the struct clk does not
+ * appear to refer to a DPLL.
+ */
+static u32 omap3_dpll_autoidle_read(struct clk_hw_omap *clk)
+{
+	const struct dpll_data *dd;
+	u32 v;
+
+	if (!clk || !clk->dpll_data)
+		return -EINVAL;
+
+	dd = clk->dpll_data;
+
+	if (!dd->autoidle_reg)
+		return -EINVAL;
+
+	v = ti_clk_ll_ops->clk_readl(dd->autoidle_reg);
+	v &= dd->autoidle_mask;
+	v >>= __ffs(dd->autoidle_mask);
+
+	return v;
+}
+
+/**
+ * omap3_dpll_allow_idle - enable DPLL autoidle bits
+ * @clk: struct clk * of the DPLL to operate on
+ *
+ * Enable DPLL automatic idle control.  This automatic idle mode
+ * switching takes effect only when the DPLL is locked, at least on
+ * OMAP3430.  The DPLL will enter low-power stop when its downstream
+ * clocks are gated.  No return value.
+ */
+static void omap3_dpll_allow_idle(struct clk_hw_omap *clk)
+{
+	const struct dpll_data *dd;
+	u32 v;
+
+	if (!clk || !clk->dpll_data)
+		return;
+
+	dd = clk->dpll_data;
+
+	if (!dd->autoidle_reg)
+		return;
+
+	/*
+	 * REVISIT: CORE DPLL can optionally enter low-power bypass
+	 * by writing 0x5 instead of 0x1.  Add some mechanism to
+	 * optionally enter this mode.
+	 */
+	v = ti_clk_ll_ops->clk_readl(dd->autoidle_reg);
+	v &= ~dd->autoidle_mask;
+	v |= DPLL_AUTOIDLE_LOW_POWER_STOP << __ffs(dd->autoidle_mask);
+	ti_clk_ll_ops->clk_writel(v, dd->autoidle_reg);
+}
+
+/**
+ * omap3_dpll_deny_idle - prevent DPLL from automatically idling
+ * @clk: struct clk * of the DPLL to operate on
+ *
+ * Disable DPLL automatic idle control.  No return value.
+ */
+static void omap3_dpll_deny_idle(struct clk_hw_omap *clk)
+{
+	const struct dpll_data *dd;
+	u32 v;
+
+	if (!clk || !clk->dpll_data)
+		return;
+
+	dd = clk->dpll_data;
+
+	if (!dd->autoidle_reg)
+		return;
+
+	v = ti_clk_ll_ops->clk_readl(dd->autoidle_reg);
+	v &= ~dd->autoidle_mask;
+	v |= DPLL_AUTOIDLE_DISABLE << __ffs(dd->autoidle_mask);
+	ti_clk_ll_ops->clk_writel(v, dd->autoidle_reg);
+}
+
+/* Clock control for DPLL outputs */
+
+/* Find the parent DPLL for the given clkoutx2 clock */
+static struct clk_hw_omap *omap3_find_clkoutx2_dpll(struct clk_hw *hw)
+{
+	struct clk_hw_omap *pclk = NULL;
+
+	/* Walk up the parents of clk, looking for a DPLL */
+	do {
+		do {
+			hw = clk_hw_get_parent(hw);
+		} while (hw && (clk_hw_get_flags(hw) & CLK_IS_BASIC));
+		if (!hw)
+			break;
+		pclk = to_clk_hw_omap(hw);
+	} while (pclk && !pclk->dpll_data);
+
+	/* clk does not have a DPLL as a parent?  error in the clock data */
+	if (!pclk) {
+		WARN_ON(1);
+		return NULL;
+	}
+
+	return pclk;
+}
+
+/**
+ * omap3_clkoutx2_recalc - recalculate DPLL X2 output virtual clock rate
+ * @clk: DPLL output struct clk
+ *
+ * Using parent clock DPLL data, look up DPLL state.  If locked, set our
+ * rate to the dpll_clk * 2; otherwise, just use dpll_clk.
+ */
+unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
+				    unsigned long parent_rate)
+{
+	const struct dpll_data *dd;
+	unsigned long rate;
+	u32 v;
+	struct clk_hw_omap *pclk = NULL;
+
+	if (!parent_rate)
+		return 0;
+
+	pclk = omap3_find_clkoutx2_dpll(hw);
+
+	if (!pclk)
+		return 0;
+
+	dd = pclk->dpll_data;
+
+	WARN_ON(!dd->enable_mask);
+
+	v = ti_clk_ll_ops->clk_readl(dd->control_reg) & dd->enable_mask;
+	v >>= __ffs(dd->enable_mask);
+	if ((v != OMAP3XXX_EN_DPLL_LOCKED) || (dd->flags & DPLL_J_TYPE))
+		rate = parent_rate;
+	else
+		rate = parent_rate * 2;
+	return rate;
+}
+
+/* OMAP3/4 non-CORE DPLL clkops */
+const struct clk_hw_omap_ops clkhwops_omap3_dpll = {
+	.allow_idle	= omap3_dpll_allow_idle,
+	.deny_idle	= omap3_dpll_deny_idle,
+};
+
+/**
+ * omap3_dpll4_set_rate - set rate for omap3 per-dpll
+ * @hw: clock to change
+ * @rate: target rate for clock
+ * @parent_rate: rate of the parent clock
+ *
+ * Check if the current SoC supports the per-dpll reprogram operation
+ * or not, and then do the rate change if supported. Returns -EINVAL
+ * if not supported, 0 for success, and potential error codes from the
+ * clock rate change.
+ */
+int omap3_dpll4_set_rate(struct clk_hw *hw, unsigned long rate,
+			 unsigned long parent_rate)
+{
+	/*
+	 * According to the 12-5 CDP code from TI, "Limitation 2.5"
+	 * on 3430ES1 prevents us from changing DPLL multipliers or dividers
+	 * on DPLL4.
+	 */
+	if (ti_clk_get_features()->flags & TI_CLK_DPLL4_DENY_REPROGRAM) {
+		pr_err("clock: DPLL4 cannot change rate due to silicon 'Limitation 2.5' on 3430ES1.\n");
+		return -EINVAL;
+	}
+
+	return omap3_noncore_dpll_set_rate(hw, rate, parent_rate);
+}
+
+/**
+ * omap3_dpll4_set_rate_and_parent - set rate and parent for omap3 per-dpll
+ * @hw: clock to change
+ * @rate: target rate for clock
+ * @parent_rate: rate of the parent clock
+ * @index: parent index, 0 - reference clock, 1 - bypass clock
+ *
+ * Check if the current SoC support the per-dpll reprogram operation
+ * or not, and then do the rate + parent change if supported. Returns
+ * -EINVAL if not supported, 0 for success, and potential error codes
+ * from the clock rate change.
+ */
+int omap3_dpll4_set_rate_and_parent(struct clk_hw *hw, unsigned long rate,
+				    unsigned long parent_rate, u8 index)
+{
+	if (ti_clk_get_features()->flags & TI_CLK_DPLL4_DENY_REPROGRAM) {
+		pr_err("clock: DPLL4 cannot change rate due to silicon 'Limitation 2.5' on 3430ES1.\n");
+		return -EINVAL;
+	}
+
+	return omap3_noncore_dpll_set_rate_and_parent(hw, rate, parent_rate,
+						      index);
+}