summaryrefslogtreecommitdiff
path: root/drivers/clk
diff options
context:
space:
mode:
authorAndré Fabian Silva Delgado <emulatorman@parabola.nu>2015-08-18 00:33:29 -0300
committerAndré Fabian Silva Delgado <emulatorman@parabola.nu>2015-08-18 00:33:29 -0300
commit6ece15cc69504348ad484564d14968c542987053 (patch)
treecd6194a333518d78edd611023f2e255e4b66c8c9 /drivers/clk
parent0a2bb03fe20f81dc4cac96d7fe0e4194ae6efffd (diff)
Linux-libre 4.1.6-gnu
Diffstat (limited to 'drivers/clk')
-rw-r--r--drivers/clk/keystone/pll.c20
1 files changed, 18 insertions, 2 deletions
diff --git a/drivers/clk/keystone/pll.c b/drivers/clk/keystone/pll.c
index 0dd8a4b12..4a375ead7 100644
--- a/drivers/clk/keystone/pll.c
+++ b/drivers/clk/keystone/pll.c
@@ -37,7 +37,8 @@
* Main PLL or any other PLLs in the device such as ARM PLL, DDR PLL
* or PA PLL available on keystone2. These PLLs are controlled by
* this register. Main PLL is controlled by a PLL controller.
- * @pllm: PLL register map address
+ * @pllm: PLL register map address for multiplier bits
+ * @pllod: PLL register map address for post divider bits
* @pll_ctl0: PLL controller map address
* @pllm_lower_mask: multiplier lower mask
* @pllm_upper_mask: multiplier upper mask
@@ -53,6 +54,7 @@ struct clk_pll_data {
u32 phy_pllm;
u32 phy_pll_ctl0;
void __iomem *pllm;
+ void __iomem *pllod;
void __iomem *pll_ctl0;
u32 pllm_lower_mask;
u32 pllm_upper_mask;
@@ -102,7 +104,11 @@ static unsigned long clk_pllclk_recalc(struct clk_hw *hw,
/* read post divider from od bits*/
postdiv = ((val & pll_data->clkod_mask) >>
pll_data->clkod_shift) + 1;
- else
+ else if (pll_data->pllod) {
+ postdiv = readl(pll_data->pllod);
+ postdiv = ((postdiv & pll_data->clkod_mask) >>
+ pll_data->clkod_shift) + 1;
+ } else
postdiv = pll_data->postdiv;
rate /= (prediv + 1);
@@ -172,12 +178,21 @@ static void __init _of_pll_clk_init(struct device_node *node, bool pllctrl)
/* assume the PLL has output divider register bits */
pll_data->clkod_mask = CLKOD_MASK;
pll_data->clkod_shift = CLKOD_SHIFT;
+
+ /*
+ * Check if there is an post-divider register. If not
+ * assume od bits are part of control register.
+ */
+ i = of_property_match_string(node, "reg-names",
+ "post-divider");
+ pll_data->pllod = of_iomap(node, i);
}
i = of_property_match_string(node, "reg-names", "control");
pll_data->pll_ctl0 = of_iomap(node, i);
if (!pll_data->pll_ctl0) {
pr_err("%s: ioremap failed\n", __func__);
+ iounmap(pll_data->pllod);
goto out;
}
@@ -193,6 +208,7 @@ static void __init _of_pll_clk_init(struct device_node *node, bool pllctrl)
pll_data->pllm = of_iomap(node, i);
if (!pll_data->pllm) {
iounmap(pll_data->pll_ctl0);
+ iounmap(pll_data->pllod);
goto out;
}
}