Linux-libre 4.5-gnu

4 files changed, 101 insertions, 4 deletions

diff --git a/drivers/firmware/efi/libstub/Makefile b/drivers/firmware/efi/libstub/Makefile
index 3c0467d36..aaf9c0bab 100644
--- a/drivers/firmware/efi/libstub/Makefile
+++ b/drivers/firmware/efi/libstub/Makefile
@@ -8,7 +8,7 @@ cflags-$(CONFIG_X86_32)		:= -march=i386
 cflags-$(CONFIG_X86_64)		:= -mcmodel=small
 cflags-$(CONFIG_X86)		+= -m$(BITS) -D__KERNEL__ $(LINUX_INCLUDE) -O2 \
 				   -fPIC -fno-strict-aliasing -mno-red-zone \
-				   -mno-mmx -mno-sse -DDISABLE_BRANCH_PROFILING
+				   -mno-mmx -mno-sse
 
 cflags-$(CONFIG_ARM64)		:= $(subst -pg,,$(KBUILD_CFLAGS))
 cflags-$(CONFIG_ARM)		:= $(subst -pg,,$(KBUILD_CFLAGS)) \
@@ -16,12 +16,13 @@ cflags-$(CONFIG_ARM)		:= $(subst -pg,,$(KBUILD_CFLAGS)) \
 
 cflags-$(CONFIG_EFI_ARMSTUB)	+= -I$(srctree)/scripts/dtc/libfdt
 
-KBUILD_CFLAGS			:= $(cflags-y) \
+KBUILD_CFLAGS			:= $(cflags-y) -DDISABLE_BRANCH_PROFILING \
 				   $(call cc-option,-ffreestanding) \
 				   $(call cc-option,-fno-stack-protector)
 
 GCOV_PROFILE			:= n
 KASAN_SANITIZE			:= n
+UBSAN_SANITIZE			:= n
 
 lib-y				:= efi-stub-helper.o
 
@@ -34,6 +35,7 @@ $(obj)/lib-%.o: $(srctree)/lib/%.c FORCE
 lib-$(CONFIG_EFI_ARMSTUB)	+= arm-stub.o fdt.o string.o \
 				   $(patsubst %.c,lib-%.o,$(arm-deps))
 
+lib-$(CONFIG_ARM)		+= arm32-stub.o
 lib-$(CONFIG_ARM64)		+= arm64-stub.o
 CFLAGS_arm64-stub.o 		:= -DTEXT_OFFSET=$(TEXT_OFFSET)
 
@@ -67,3 +69,11 @@ quiet_cmd_stubcopy = STUBCPY $@
 		     $(OBJDUMP) -r $@ | grep $(STUBCOPY_RELOC-y)	\
 		     && (echo >&2 "$@: absolute symbol references not allowed in the EFI stub"; \
 			 rm -f $@; /bin/false); else /bin/false; fi
+
+#
+# ARM discards the .data section because it disallows r/w data in the
+# decompressor. So move our .data to .data.efistub, which is preserved
+# explicitly by the decompressor linker script.
+#
+STUBCOPY_FLAGS-$(CONFIG_ARM)	+= --rename-section .data=.data.efistub
+STUBCOPY_RELOC-$(CONFIG_ARM)	:= R_ARM_ABS
diff --git a/drivers/firmware/efi/libstub/arm-stub.c b/drivers/firmware/efi/libstub/arm-stub.c
index 950c87f5d..3397902e4 100644
--- a/drivers/firmware/efi/libstub/arm-stub.c
+++ b/drivers/firmware/efi/libstub/arm-stub.c
@@ -303,8 +303,10 @@ fail:
  * The value chosen is the largest non-zero power of 2 suitable for this purpose
  * both on 32-bit and 64-bit ARM CPUs, to maximize the likelihood that it can
  * be mapped efficiently.
+ * Since 32-bit ARM could potentially execute with a 1G/3G user/kernel split,
+ * map everything below 1 GB.
  */
-#define EFI_RT_VIRTUAL_BASE	0x40000000
+#define EFI_RT_VIRTUAL_BASE	SZ_512M
 
 static int cmp_mem_desc(const void *l, const void *r)
 {
diff --git a/drivers/firmware/efi/libstub/arm32-stub.c b/drivers/firmware/efi/libstub/arm32-stub.c
new file mode 100644
index 000000000..495ebd657
--- /dev/null
+++ b/drivers/firmware/efi/libstub/arm32-stub.c
@@ -0,0 +1,85 @@
+/*
+ * Copyright (C) 2013 Linaro Ltd;  <roy.franz@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/efi.h>
+#include <asm/efi.h>
+
+efi_status_t handle_kernel_image(efi_system_table_t *sys_table,
+				 unsigned long *image_addr,
+				 unsigned long *image_size,
+				 unsigned long *reserve_addr,
+				 unsigned long *reserve_size,
+				 unsigned long dram_base,
+				 efi_loaded_image_t *image)
+{
+	unsigned long nr_pages;
+	efi_status_t status;
+	/* Use alloc_addr to tranlsate between types */
+	efi_physical_addr_t alloc_addr;
+
+	/*
+	 * Verify that the DRAM base address is compatible with the ARM
+	 * boot protocol, which determines the base of DRAM by masking
+	 * off the low 27 bits of the address at which the zImage is
+	 * loaded. These assumptions are made by the decompressor,
+	 * before any memory map is available.
+	 */
+	dram_base = round_up(dram_base, SZ_128M);
+
+	/*
+	 * Reserve memory for the uncompressed kernel image. This is
+	 * all that prevents any future allocations from conflicting
+	 * with the kernel. Since we can't tell from the compressed
+	 * image how much DRAM the kernel actually uses (due to BSS
+	 * size uncertainty) we allocate the maximum possible size.
+	 * Do this very early, as prints can cause memory allocations
+	 * that may conflict with this.
+	 */
+	alloc_addr = dram_base;
+	*reserve_size = MAX_UNCOMP_KERNEL_SIZE;
+	nr_pages = round_up(*reserve_size, EFI_PAGE_SIZE) / EFI_PAGE_SIZE;
+	status = sys_table->boottime->allocate_pages(EFI_ALLOCATE_ADDRESS,
+						     EFI_LOADER_DATA,
+						     nr_pages, &alloc_addr);
+	if (status != EFI_SUCCESS) {
+		*reserve_size = 0;
+		pr_efi_err(sys_table, "Unable to allocate memory for uncompressed kernel.\n");
+		return status;
+	}
+	*reserve_addr = alloc_addr;
+
+	/*
+	 * Relocate the zImage, so that it appears in the lowest 128 MB
+	 * memory window.
+	 */
+	*image_size = image->image_size;
+	status = efi_relocate_kernel(sys_table, image_addr, *image_size,
+				     *image_size,
+				     dram_base + MAX_UNCOMP_KERNEL_SIZE, 0);
+	if (status != EFI_SUCCESS) {
+		pr_efi_err(sys_table, "Failed to relocate kernel.\n");
+		efi_free(sys_table, *reserve_size, *reserve_addr);
+		*reserve_size = 0;
+		return status;
+	}
+
+	/*
+	 * Check to see if we were able to allocate memory low enough
+	 * in memory. The kernel determines the base of DRAM from the
+	 * address at which the zImage is loaded.
+	 */
+	if (*image_addr + *image_size > dram_base + ZIMAGE_OFFSET_LIMIT) {
+		pr_efi_err(sys_table, "Failed to relocate kernel, no low memory available.\n");
+		efi_free(sys_table, *reserve_size, *reserve_addr);
+		*reserve_size = 0;
+		efi_free(sys_table, *image_size, *image_addr);
+		*image_size = 0;
+		return EFI_LOAD_ERROR;
+	}
+	return EFI_SUCCESS;
+}
diff --git a/drivers/firmware/efi/libstub/fdt.c b/drivers/firmware/efi/libstub/fdt.c
index b62e2f5dc..cf7b7d463 100644
--- a/drivers/firmware/efi/libstub/fdt.c
+++ b/drivers/firmware/efi/libstub/fdt.c
@@ -253,7 +253,7 @@ efi_status_t allocate_new_fdt_and_exit_boot(efi_system_table_t *sys_table,
 			sys_table->boottime->free_pool(memory_map);
 			new_fdt_size += EFI_PAGE_SIZE;
 		} else {
-			pr_efi_err(sys_table, "Unable to constuct new device tree.\n");
+			pr_efi_err(sys_table, "Unable to construct new device tree.\n");
 			goto fail_free_mmap;
 		}
 	}