Linux-libre 4.6.2-gnu

1 files changed, 82 insertions, 9 deletions

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index c88dd24a4..5f3429f0b 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -126,6 +126,16 @@ config GPIO_AMDPT
 	  driver for GPIO functionality on Promontory IOHub
 	  Require ACPI ASL code to enumerate as a platform device.
 
+config GPIO_ATH79
+	tristate "Atheros AR71XX/AR724X/AR913X GPIO support"
+	default y if ATH79
+	depends on ATH79 || COMPILE_TEST
+	select GPIO_GENERIC
+	select GPIOLIB_IRQCHIP
+	help
+	  Select this option to enable GPIO driver for
+	  Atheros AR71XX/AR724X/AR913X SoC devices.
+
 config GPIO_BCM_KONA
 	bool "Broadcom Kona GPIO"
 	depends on OF_GPIO && (ARCH_BCM_MOBILE || COMPILE_TEST)
@@ -256,10 +266,17 @@ config GPIO_LYNXPOINT
 
 config GPIO_MB86S7X
 	bool "GPIO support for Fujitsu MB86S7x Platforms"
-	depends on ARCH_MB86S7X
+	depends on ARCH_MB86S7X || COMPILE_TEST
 	help
 	  Say yes here to support the GPIO controller in Fujitsu MB86S70 SoCs.
 
+config GPIO_MENZ127
+	tristate "MEN 16Z127 GPIO support"
+	depends on MCB
+	select GPIO_GENERIC
+	help
+	 Say yes here to support the MEN 16Z127 GPIO Controller
+
 config GPIO_MM_LANTIQ
 	bool "Lantiq Memory mapped GPIOs"
 	depends on LANTIQ && SOC_XWAY
@@ -270,7 +287,7 @@ config GPIO_MM_LANTIQ
 
 config GPIO_MOXART
 	bool "MOXART GPIO support"
-	depends on ARCH_MOXART
+	depends on ARCH_MOXART || COMPILE_TEST
 	select GPIO_GENERIC
 	help
 	  Select this option to enable GPIO driver for
@@ -281,12 +298,14 @@ config GPIO_MPC5200
 	depends on PPC_MPC52xx
 
 config GPIO_MPC8XXX
-	bool "MPC512x/MPC8xxx GPIO support"
+	bool "MPC512x/MPC8xxx/QorIQ GPIO support"
 	depends on PPC_MPC512x || PPC_MPC831x || PPC_MPC834x || PPC_MPC837x || \
-		   FSL_SOC_BOOKE || PPC_86xx
+		   FSL_SOC_BOOKE || PPC_86xx || ARCH_LAYERSCAPE || ARM || \
+		   COMPILE_TEST
+	select GPIO_GENERIC
 	help
 	  Say Y here if you're going to use hardware that connects to the
-	  MPC512x/831x/834x/837x/8572/8610 GPIOs.
+	  MPC512x/831x/834x/837x/8572/8610/QorIQ GPIOs.
 
 config GPIO_MVEBU
 	def_bool y
@@ -339,7 +358,7 @@ config GPIO_PXA
 
 config GPIO_RCAR
 	tristate "Renesas R-Car GPIO"
-	depends on ARCH_SHMOBILE || COMPILE_TEST
+	depends on ARCH_RENESAS || COMPILE_TEST
 	select GPIOLIB_IRQCHIP
 	help
 	  Say yes here to support GPIO on Renesas R-Car SoCs.
@@ -380,6 +399,14 @@ config GPIO_TB10X
 	select GENERIC_IRQ_CHIP
 	select OF_GPIO
 
+config GPIO_TS4800
+	tristate "TS-4800 DIO blocks and compatibles"
+	depends on OF_GPIO
+	depends on SOC_IMX51 || COMPILE_TEST
+	select GPIO_GENERIC
+	help
+	  This driver support TS-4800 FPGA GPIO controllers.
+
 config GPIO_TZ1090
 	bool "Toumaz Xenif TZ1090 GPIO support"
 	depends on SOC_TZ1090
@@ -433,6 +460,7 @@ config GPIO_XGENE_SB
 	tristate "APM X-Gene GPIO standby controller support"
 	depends on ARCH_XGENE && OF_GPIO
 	select GPIO_GENERIC
+	select GPIOLIB_IRQCHIP
 	help
 	  This driver supports the GPIO block within the APM X-Gene
 	  Standby Domain. Say yes here to enable the GPIO functionality.
@@ -487,6 +515,15 @@ endmenu
 menu "Port-mapped I/O GPIO drivers"
 	depends on X86 # Unconditional I/O space access
 
+config GPIO_104_DIO_48E
+	tristate "ACCES 104-DIO-48E GPIO support"
+	select GPIOLIB_IRQCHIP
+	help
+	  Enables GPIO support for the ACCES 104-DIO-48E family. The base port
+	  address for the device may be configured via the dio_48e_base module
+	  parameter. The interrupt line number for the device may be configured
+	  via the dio_48e_irq module parameter.
+
 config GPIO_104_IDIO_16
 	tristate "ACCES 104-IDIO-16 GPIO support"
 	select GPIOLIB_IRQCHIP
@@ -506,10 +543,10 @@ config GPIO_104_IDI_48
 	  via the idi_48_irq module parameter.
 
 config GPIO_F7188X
-	tristate "F71869, F71869A, F71882FG and F71889F GPIO support"
+	tristate "F71869, F71869A, F71882FG, F71889F and F81866 GPIO support"
 	help
 	  This option enables support for GPIOs found on Fintek Super-I/O
-	  chips F71869, F71869A, F71882FG and F71889F.
+	  chips F71869, F71869A, F71882FG, F71889F and F81866.
 
 	  To compile this driver as a module, choose M here: the module will
 	  be called f7188x-gpio.
@@ -570,6 +607,15 @@ config GPIO_TS5500
 	  blocks of the TS-5500: DIO1, DIO2 and the LCD port, and the TS-5600
 	  LCD port.
 
+config GPIO_WS16C48
+	tristate "WinSystems WS16C48 GPIO support"
+	select GPIOLIB_IRQCHIP
+	help
+	  Enables GPIO support for the WinSystems WS16C48. The base port address
+	  for the device may be configured via the ws16c48_base module
+	  parameter. The interrupt line number for the device may be configured
+	  via the ws16c48_irq module parameter.
+
 endmenu
 
 menu "I2C GPIO expanders"
@@ -702,6 +748,14 @@ config GPIO_SX150X
 	  8 bits:  sx1508q
 	  16 bits: sx1509q
 
+config GPIO_TPIC2810
+	tristate "TPIC2810 8-Bit I2C GPO expander"
+	help
+	  Say yes here to enable the GPO driver for the TI TPIC2810 chip.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called gpio-tpic2810.
+
 endmenu
 
 menu "MFD GPIO expanders"
@@ -844,6 +898,19 @@ config GPIO_TIMBERDALE
 	---help---
 	Add support for the GPIO IP in the timberdale FPGA.
 
+config GPIO_TPS65086
+	tristate "TI TPS65086 GPO"
+	depends on MFD_TPS65086
+	help
+	  This driver supports the GPO on TI TPS65086x PMICs.
+
+config GPIO_TPS65218
+	tristate "TPS65218 GPIO"
+	depends on MFD_TPS65218
+	help
+	  Select this option to enable GPIO driver for the TPS65218
+	  chip family.
+
 config GPIO_TPS6586X
 	bool "TPS6586X GPIO"
 	depends on MFD_TPS6586X
@@ -860,7 +927,7 @@ config GPIO_TPS65910
 
 config GPIO_TPS65912
 	tristate "TI TPS65912 GPIO"
-	depends on (MFD_TPS65912_I2C || MFD_TPS65912_SPI)
+	depends on MFD_TPS65912
 	help
 	  This driver supports TPS65912 gpio chip
 
@@ -1011,6 +1078,12 @@ config GPIO_MC33880
 	  SPI driver for Freescale MC33880 high-side/low-side switch.
 	  This provides GPIO interface supporting inputs and outputs.
 
+config GPIO_PISOSR
+	tristate "Generic parallel-in/serial-out shift register"
+	help
+	  GPIO driver for SPI compatible parallel-in/serial-out shift
+	  registers. These are input only devices.
+
 endmenu
 
 menu "SPI or I2C GPIO expanders"