Initial import

1 files changed, 252 insertions, 0 deletions

diff --git a/drivers/gpio/gpio-amd8111.c b/drivers/gpio/gpio-amd8111.c
new file mode 100644
index 000000000..d00d81928
--- /dev/null
+++ b/drivers/gpio/gpio-amd8111.c
@@ -0,0 +1,252 @@
+/*
+ * GPIO driver for AMD 8111 south bridges
+ *
+ * Copyright (c) 2012 Dmitry Eremin-Solenikov
+ *
+ * Based on the AMD RNG driver:
+ * Copyright 2005 (c) MontaVista Software, Inc.
+ * with the majority of the code coming from:
+ *
+ * Hardware driver for the Intel/AMD/VIA Random Number Generators (RNG)
+ * (c) Copyright 2003 Red Hat Inc <jgarzik@redhat.com>
+ *
+ * derived from
+ *
+ * Hardware driver for the AMD 768 Random Number Generator (RNG)
+ * (c) Copyright 2001 Red Hat Inc
+ *
+ * derived from
+ *
+ * Hardware driver for Intel i810 Random Number Generator (RNG)
+ * Copyright 2000,2001 Jeff Garzik <jgarzik@pobox.com>
+ * Copyright 2000,2001 Philipp Rumpf <prumpf@mandrakesoft.com>
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+
+#define PMBASE_OFFSET 0xb0
+#define PMBASE_SIZE   0x30
+
+#define AMD_REG_GPIO(i) (0x10 + (i))
+
+#define AMD_GPIO_LTCH_STS	0x40 /* Latch status, w1 */
+#define AMD_GPIO_RTIN		0x20 /* Real Time in, ro */
+#define AMD_GPIO_DEBOUNCE	0x10 /* Debounce, rw */
+#define AMD_GPIO_MODE_MASK	0x0c /* Pin Mode Select, rw */
+#define AMD_GPIO_MODE_IN	0x00
+#define AMD_GPIO_MODE_OUT	0x04
+/* Enable alternative (e.g. clkout, IRQ, etc) function of the pin */
+#define AMD_GPIO_MODE_ALTFN	0x08 /* Or 0x09 */
+#define AMD_GPIO_X_MASK		0x03 /* In/Out specific, rw */
+#define AMD_GPIO_X_IN_ACTIVEHI	0x01 /* Active High */
+#define AMD_GPIO_X_IN_LATCH	0x02 /* Latched version is selected */
+#define AMD_GPIO_X_OUT_LOW	0x00
+#define AMD_GPIO_X_OUT_HI	0x01
+#define AMD_GPIO_X_OUT_CLK0	0x02
+#define AMD_GPIO_X_OUT_CLK1	0x03
+
+/*
+ * Data for PCI driver interface
+ *
+ * This data only exists for exporting the supported
+ * PCI ids via MODULE_DEVICE_TABLE.  We do not actually
+ * register a pci_driver, because someone else might one day
+ * want to register another driver on the same PCI id.
+ */
+static const struct pci_device_id pci_tbl[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_SMBUS), 0 },
+	{ 0, },	/* terminate list */
+};
+MODULE_DEVICE_TABLE(pci, pci_tbl);
+
+struct amd_gpio {
+	struct gpio_chip	chip;
+	u32			pmbase;
+	void __iomem		*pm;
+	struct pci_dev		*pdev;
+	spinlock_t		lock; /* guards hw registers and orig table */
+	u8			orig[32];
+};
+
+#define to_agp(chip)	container_of(chip, struct amd_gpio, chip)
+
+static int amd_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+	struct amd_gpio *agp = to_agp(chip);
+
+	agp->orig[offset] = ioread8(agp->pm + AMD_REG_GPIO(offset)) &
+		(AMD_GPIO_DEBOUNCE | AMD_GPIO_MODE_MASK | AMD_GPIO_X_MASK);
+
+	dev_dbg(&agp->pdev->dev, "Requested gpio %d, data %x\n", offset, agp->orig[offset]);
+
+	return 0;
+}
+
+static void amd_gpio_free(struct gpio_chip *chip, unsigned offset)
+{
+	struct amd_gpio *agp = to_agp(chip);
+
+	dev_dbg(&agp->pdev->dev, "Freed gpio %d, data %x\n", offset, agp->orig[offset]);
+
+	iowrite8(agp->orig[offset], agp->pm + AMD_REG_GPIO(offset));
+}
+
+static void amd_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct amd_gpio *agp = to_agp(chip);
+	u8 temp;
+	unsigned long flags;
+
+	spin_lock_irqsave(&agp->lock, flags);
+	temp = ioread8(agp->pm + AMD_REG_GPIO(offset));
+	temp = (temp & AMD_GPIO_DEBOUNCE) | AMD_GPIO_MODE_OUT | (value ? AMD_GPIO_X_OUT_HI : AMD_GPIO_X_OUT_LOW);
+	iowrite8(temp, agp->pm + AMD_REG_GPIO(offset));
+	spin_unlock_irqrestore(&agp->lock, flags);
+
+	dev_dbg(&agp->pdev->dev, "Setting gpio %d, value %d, reg=%02x\n", offset, !!value, temp);
+}
+
+static int amd_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct amd_gpio *agp = to_agp(chip);
+	u8 temp;
+
+	temp = ioread8(agp->pm + AMD_REG_GPIO(offset));
+
+	dev_dbg(&agp->pdev->dev, "Getting gpio %d, reg=%02x\n", offset, temp);
+
+	return (temp & AMD_GPIO_RTIN) ? 1 : 0;
+}
+
+static int amd_gpio_dirout(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct amd_gpio *agp = to_agp(chip);
+	u8 temp;
+	unsigned long flags;
+
+	spin_lock_irqsave(&agp->lock, flags);
+	temp = ioread8(agp->pm + AMD_REG_GPIO(offset));
+	temp = (temp & AMD_GPIO_DEBOUNCE) | AMD_GPIO_MODE_OUT | (value ? AMD_GPIO_X_OUT_HI : AMD_GPIO_X_OUT_LOW);
+	iowrite8(temp, agp->pm + AMD_REG_GPIO(offset));
+	spin_unlock_irqrestore(&agp->lock, flags);
+
+	dev_dbg(&agp->pdev->dev, "Dirout gpio %d, value %d, reg=%02x\n", offset, !!value, temp);
+
+	return 0;
+}
+
+static int amd_gpio_dirin(struct gpio_chip *chip, unsigned offset)
+{
+	struct amd_gpio *agp = to_agp(chip);
+	u8 temp;
+	unsigned long flags;
+
+	spin_lock_irqsave(&agp->lock, flags);
+	temp = ioread8(agp->pm + AMD_REG_GPIO(offset));
+	temp = (temp & AMD_GPIO_DEBOUNCE) | AMD_GPIO_MODE_IN;
+	iowrite8(temp, agp->pm + AMD_REG_GPIO(offset));
+	spin_unlock_irqrestore(&agp->lock, flags);
+
+	dev_dbg(&agp->pdev->dev, "Dirin gpio %d, reg=%02x\n", offset, temp);
+
+	return 0;
+}
+
+static struct amd_gpio gp = {
+	.chip = {
+		.label		= "AMD GPIO",
+		.owner		= THIS_MODULE,
+		.base		= -1,
+		.ngpio		= 32,
+		.request	= amd_gpio_request,
+		.free		= amd_gpio_free,
+		.set		= amd_gpio_set,
+		.get		= amd_gpio_get,
+		.direction_output = amd_gpio_dirout,
+		.direction_input = amd_gpio_dirin,
+	},
+};
+
+static int __init amd_gpio_init(void)
+{
+	int err = -ENODEV;
+	struct pci_dev *pdev = NULL;
+	const struct pci_device_id *ent;
+
+
+	/* We look for our device - AMD South Bridge
+	 * I don't know about a system with two such bridges,
+	 * so we can assume that there is max. one device.
+	 *
+	 * We can't use plain pci_driver mechanism,
+	 * as the device is really a multiple function device,
+	 * main driver that binds to the pci_device is an smbus
+	 * driver and have to find & bind to the device this way.
+	 */
+	for_each_pci_dev(pdev) {
+		ent = pci_match_id(pci_tbl, pdev);
+		if (ent)
+			goto found;
+	}
+	/* Device not found. */
+	goto out;
+
+found:
+	err = pci_read_config_dword(pdev, 0x58, &gp.pmbase);
+	if (err)
+		goto out;
+	err = -EIO;
+	gp.pmbase &= 0x0000FF00;
+	if (gp.pmbase == 0)
+		goto out;
+	if (!request_region(gp.pmbase + PMBASE_OFFSET, PMBASE_SIZE, "AMD GPIO")) {
+		dev_err(&pdev->dev, "AMD GPIO region 0x%x already in use!\n",
+			gp.pmbase + PMBASE_OFFSET);
+		err = -EBUSY;
+		goto out;
+	}
+	gp.pm = ioport_map(gp.pmbase + PMBASE_OFFSET, PMBASE_SIZE);
+	if (!gp.pm) {
+		dev_err(&pdev->dev, "Couldn't map io port into io memory\n");
+		release_region(gp.pmbase + PMBASE_OFFSET, PMBASE_SIZE);
+		err = -ENOMEM;
+		goto out;
+	}
+	gp.pdev = pdev;
+	gp.chip.dev = &pdev->dev;
+
+	spin_lock_init(&gp.lock);
+
+	printk(KERN_INFO "AMD-8111 GPIO detected\n");
+	err = gpiochip_add(&gp.chip);
+	if (err) {
+		printk(KERN_ERR "GPIO registering failed (%d)\n",
+		       err);
+		ioport_unmap(gp.pm);
+		release_region(gp.pmbase + PMBASE_OFFSET, PMBASE_SIZE);
+		goto out;
+	}
+out:
+	return err;
+}
+
+static void __exit amd_gpio_exit(void)
+{
+	gpiochip_remove(&gp.chip);
+	ioport_unmap(gp.pm);
+	release_region(gp.pmbase + PMBASE_OFFSET, PMBASE_SIZE);
+}
+
+module_init(amd_gpio_init);
+module_exit(amd_gpio_exit);
+
+MODULE_AUTHOR("The Linux Kernel team");
+MODULE_DESCRIPTION("GPIO driver for AMD chipsets");
+MODULE_LICENSE("GPL");