Initial import

1 files changed, 915 insertions, 0 deletions

diff --git a/drivers/gpu/drm/i915/intel_opregion.c b/drivers/gpu/drm/i915/intel_opregion.c
new file mode 100644
index 000000000..71e87abdc
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_opregion.c
@@ -0,0 +1,915 @@
+/*
+ * Copyright 2008 Intel Corporation <hong.liu@intel.com>
+ * Copyright 2008 Red Hat <mjg@redhat.com>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining
+ * a copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial
+ * portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NON-INFRINGEMENT.  IN NO EVENT SHALL INTEL AND/OR ITS SUPPLIERS BE
+ * LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/acpi.h>
+#include <acpi/video.h>
+
+#include <drm/drmP.h>
+#include <drm/i915_drm.h>
+#include "i915_drv.h"
+#include "intel_drv.h"
+
+#define PCI_ASLE		0xe4
+#define PCI_ASLS		0xfc
+#define PCI_SWSCI		0xe8
+#define PCI_SWSCI_SCISEL	(1 << 15)
+#define PCI_SWSCI_GSSCIE	(1 << 0)
+
+#define OPREGION_HEADER_OFFSET 0
+#define OPREGION_ACPI_OFFSET   0x100
+#define   ACPI_CLID 0x01ac /* current lid state indicator */
+#define   ACPI_CDCK 0x01b0 /* current docking state indicator */
+#define OPREGION_SWSCI_OFFSET  0x200
+#define OPREGION_ASLE_OFFSET   0x300
+#define OPREGION_VBT_OFFSET    0x400
+
+#define OPREGION_SIGNATURE "IntelGraphicsMem"
+#define MBOX_ACPI      (1<<0)
+#define MBOX_SWSCI     (1<<1)
+#define MBOX_ASLE      (1<<2)
+
+struct opregion_header {
+	u8 signature[16];
+	u32 size;
+	u32 opregion_ver;
+	u8 bios_ver[32];
+	u8 vbios_ver[16];
+	u8 driver_ver[16];
+	u32 mboxes;
+	u8 reserved[164];
+} __packed;
+
+/* OpRegion mailbox #1: public ACPI methods */
+struct opregion_acpi {
+	u32 drdy;       /* driver readiness */
+	u32 csts;       /* notification status */
+	u32 cevt;       /* current event */
+	u8 rsvd1[20];
+	u32 didl[8];    /* supported display devices ID list */
+	u32 cpdl[8];    /* currently presented display list */
+	u32 cadl[8];    /* currently active display list */
+	u32 nadl[8];    /* next active devices list */
+	u32 aslp;       /* ASL sleep time-out */
+	u32 tidx;       /* toggle table index */
+	u32 chpd;       /* current hotplug enable indicator */
+	u32 clid;       /* current lid state*/
+	u32 cdck;       /* current docking state */
+	u32 sxsw;       /* Sx state resume */
+	u32 evts;       /* ASL supported events */
+	u32 cnot;       /* current OS notification */
+	u32 nrdy;       /* driver status */
+	u8 rsvd2[60];
+} __packed;
+
+/* OpRegion mailbox #2: SWSCI */
+struct opregion_swsci {
+	u32 scic;       /* SWSCI command|status|data */
+	u32 parm;       /* command parameters */
+	u32 dslp;       /* driver sleep time-out */
+	u8 rsvd[244];
+} __packed;
+
+/* OpRegion mailbox #3: ASLE */
+struct opregion_asle {
+	u32 ardy;       /* driver readiness */
+	u32 aslc;       /* ASLE interrupt command */
+	u32 tche;       /* technology enabled indicator */
+	u32 alsi;       /* current ALS illuminance reading */
+	u32 bclp;       /* backlight brightness to set */
+	u32 pfit;       /* panel fitting state */
+	u32 cblv;       /* current brightness level */
+	u16 bclm[20];   /* backlight level duty cycle mapping table */
+	u32 cpfm;       /* current panel fitting mode */
+	u32 epfm;       /* enabled panel fitting modes */
+	u8 plut[74];    /* panel LUT and identifier */
+	u32 pfmb;       /* PWM freq and min brightness */
+	u32 cddv;       /* color correction default values */
+	u32 pcft;       /* power conservation features */
+	u32 srot;       /* supported rotation angles */
+	u32 iuer;       /* IUER events */
+	u8 rsvd[86];
+} __packed;
+
+/* Driver readiness indicator */
+#define ASLE_ARDY_READY		(1 << 0)
+#define ASLE_ARDY_NOT_READY	(0 << 0)
+
+/* ASLE Interrupt Command (ASLC) bits */
+#define ASLC_SET_ALS_ILLUM		(1 << 0)
+#define ASLC_SET_BACKLIGHT		(1 << 1)
+#define ASLC_SET_PFIT			(1 << 2)
+#define ASLC_SET_PWM_FREQ		(1 << 3)
+#define ASLC_SUPPORTED_ROTATION_ANGLES	(1 << 4)
+#define ASLC_BUTTON_ARRAY		(1 << 5)
+#define ASLC_CONVERTIBLE_INDICATOR	(1 << 6)
+#define ASLC_DOCKING_INDICATOR		(1 << 7)
+#define ASLC_ISCT_STATE_CHANGE		(1 << 8)
+#define ASLC_REQ_MSK			0x1ff
+/* response bits */
+#define ASLC_ALS_ILLUM_FAILED		(1 << 10)
+#define ASLC_BACKLIGHT_FAILED		(1 << 12)
+#define ASLC_PFIT_FAILED		(1 << 14)
+#define ASLC_PWM_FREQ_FAILED		(1 << 16)
+#define ASLC_ROTATION_ANGLES_FAILED	(1 << 18)
+#define ASLC_BUTTON_ARRAY_FAILED	(1 << 20)
+#define ASLC_CONVERTIBLE_FAILED		(1 << 22)
+#define ASLC_DOCKING_FAILED		(1 << 24)
+#define ASLC_ISCT_STATE_FAILED		(1 << 26)
+
+/* Technology enabled indicator */
+#define ASLE_TCHE_ALS_EN	(1 << 0)
+#define ASLE_TCHE_BLC_EN	(1 << 1)
+#define ASLE_TCHE_PFIT_EN	(1 << 2)
+#define ASLE_TCHE_PFMB_EN	(1 << 3)
+
+/* ASLE backlight brightness to set */
+#define ASLE_BCLP_VALID                (1<<31)
+#define ASLE_BCLP_MSK          (~(1<<31))
+
+/* ASLE panel fitting request */
+#define ASLE_PFIT_VALID         (1<<31)
+#define ASLE_PFIT_CENTER (1<<0)
+#define ASLE_PFIT_STRETCH_TEXT (1<<1)
+#define ASLE_PFIT_STRETCH_GFX (1<<2)
+
+/* PWM frequency and minimum brightness */
+#define ASLE_PFMB_BRIGHTNESS_MASK (0xff)
+#define ASLE_PFMB_BRIGHTNESS_VALID (1<<8)
+#define ASLE_PFMB_PWM_MASK (0x7ffffe00)
+#define ASLE_PFMB_PWM_VALID (1<<31)
+
+#define ASLE_CBLV_VALID         (1<<31)
+
+/* IUER */
+#define ASLE_IUER_DOCKING		(1 << 7)
+#define ASLE_IUER_CONVERTIBLE		(1 << 6)
+#define ASLE_IUER_ROTATION_LOCK_BTN	(1 << 4)
+#define ASLE_IUER_VOLUME_DOWN_BTN	(1 << 3)
+#define ASLE_IUER_VOLUME_UP_BTN		(1 << 2)
+#define ASLE_IUER_WINDOWS_BTN		(1 << 1)
+#define ASLE_IUER_POWER_BTN		(1 << 0)
+
+/* Software System Control Interrupt (SWSCI) */
+#define SWSCI_SCIC_INDICATOR		(1 << 0)
+#define SWSCI_SCIC_MAIN_FUNCTION_SHIFT	1
+#define SWSCI_SCIC_MAIN_FUNCTION_MASK	(0xf << 1)
+#define SWSCI_SCIC_SUB_FUNCTION_SHIFT	8
+#define SWSCI_SCIC_SUB_FUNCTION_MASK	(0xff << 8)
+#define SWSCI_SCIC_EXIT_PARAMETER_SHIFT	8
+#define SWSCI_SCIC_EXIT_PARAMETER_MASK	(0xff << 8)
+#define SWSCI_SCIC_EXIT_STATUS_SHIFT	5
+#define SWSCI_SCIC_EXIT_STATUS_MASK	(7 << 5)
+#define SWSCI_SCIC_EXIT_STATUS_SUCCESS	1
+
+#define SWSCI_FUNCTION_CODE(main, sub) \
+	((main) << SWSCI_SCIC_MAIN_FUNCTION_SHIFT | \
+	 (sub) << SWSCI_SCIC_SUB_FUNCTION_SHIFT)
+
+/* SWSCI: Get BIOS Data (GBDA) */
+#define SWSCI_GBDA			4
+#define SWSCI_GBDA_SUPPORTED_CALLS	SWSCI_FUNCTION_CODE(SWSCI_GBDA, 0)
+#define SWSCI_GBDA_REQUESTED_CALLBACKS	SWSCI_FUNCTION_CODE(SWSCI_GBDA, 1)
+#define SWSCI_GBDA_BOOT_DISPLAY_PREF	SWSCI_FUNCTION_CODE(SWSCI_GBDA, 4)
+#define SWSCI_GBDA_PANEL_DETAILS	SWSCI_FUNCTION_CODE(SWSCI_GBDA, 5)
+#define SWSCI_GBDA_TV_STANDARD		SWSCI_FUNCTION_CODE(SWSCI_GBDA, 6)
+#define SWSCI_GBDA_INTERNAL_GRAPHICS	SWSCI_FUNCTION_CODE(SWSCI_GBDA, 7)
+#define SWSCI_GBDA_SPREAD_SPECTRUM	SWSCI_FUNCTION_CODE(SWSCI_GBDA, 10)
+
+/* SWSCI: System BIOS Callbacks (SBCB) */
+#define SWSCI_SBCB			6
+#define SWSCI_SBCB_SUPPORTED_CALLBACKS	SWSCI_FUNCTION_CODE(SWSCI_SBCB, 0)
+#define SWSCI_SBCB_INIT_COMPLETION	SWSCI_FUNCTION_CODE(SWSCI_SBCB, 1)
+#define SWSCI_SBCB_PRE_HIRES_SET_MODE	SWSCI_FUNCTION_CODE(SWSCI_SBCB, 3)
+#define SWSCI_SBCB_POST_HIRES_SET_MODE	SWSCI_FUNCTION_CODE(SWSCI_SBCB, 4)
+#define SWSCI_SBCB_DISPLAY_SWITCH	SWSCI_FUNCTION_CODE(SWSCI_SBCB, 5)
+#define SWSCI_SBCB_SET_TV_FORMAT	SWSCI_FUNCTION_CODE(SWSCI_SBCB, 6)
+#define SWSCI_SBCB_ADAPTER_POWER_STATE	SWSCI_FUNCTION_CODE(SWSCI_SBCB, 7)
+#define SWSCI_SBCB_DISPLAY_POWER_STATE	SWSCI_FUNCTION_CODE(SWSCI_SBCB, 8)
+#define SWSCI_SBCB_SET_BOOT_DISPLAY	SWSCI_FUNCTION_CODE(SWSCI_SBCB, 9)
+#define SWSCI_SBCB_SET_PANEL_DETAILS	SWSCI_FUNCTION_CODE(SWSCI_SBCB, 10)
+#define SWSCI_SBCB_SET_INTERNAL_GFX	SWSCI_FUNCTION_CODE(SWSCI_SBCB, 11)
+#define SWSCI_SBCB_POST_HIRES_TO_DOS_FS	SWSCI_FUNCTION_CODE(SWSCI_SBCB, 16)
+#define SWSCI_SBCB_SUSPEND_RESUME	SWSCI_FUNCTION_CODE(SWSCI_SBCB, 17)
+#define SWSCI_SBCB_SET_SPREAD_SPECTRUM	SWSCI_FUNCTION_CODE(SWSCI_SBCB, 18)
+#define SWSCI_SBCB_POST_VBE_PM		SWSCI_FUNCTION_CODE(SWSCI_SBCB, 19)
+#define SWSCI_SBCB_ENABLE_DISABLE_AUDIO	SWSCI_FUNCTION_CODE(SWSCI_SBCB, 21)
+
+#define ACPI_OTHER_OUTPUT (0<<8)
+#define ACPI_VGA_OUTPUT (1<<8)
+#define ACPI_TV_OUTPUT (2<<8)
+#define ACPI_DIGITAL_OUTPUT (3<<8)
+#define ACPI_LVDS_OUTPUT (4<<8)
+
+#define MAX_DSLP	1500
+
+#ifdef CONFIG_ACPI
+static int swsci(struct drm_device *dev, u32 function, u32 parm, u32 *parm_out)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct opregion_swsci __iomem *swsci = dev_priv->opregion.swsci;
+	u32 main_function, sub_function, scic;
+	u16 pci_swsci;
+	u32 dslp;
+
+	if (!swsci)
+		return -ENODEV;
+
+	main_function = (function & SWSCI_SCIC_MAIN_FUNCTION_MASK) >>
+		SWSCI_SCIC_MAIN_FUNCTION_SHIFT;
+	sub_function = (function & SWSCI_SCIC_SUB_FUNCTION_MASK) >>
+		SWSCI_SCIC_SUB_FUNCTION_SHIFT;
+
+	/* Check if we can call the function. See swsci_setup for details. */
+	if (main_function == SWSCI_SBCB) {
+		if ((dev_priv->opregion.swsci_sbcb_sub_functions &
+		     (1 << sub_function)) == 0)
+			return -EINVAL;
+	} else if (main_function == SWSCI_GBDA) {
+		if ((dev_priv->opregion.swsci_gbda_sub_functions &
+		     (1 << sub_function)) == 0)
+			return -EINVAL;
+	}
+
+	/* Driver sleep timeout in ms. */
+	dslp = ioread32(&swsci->dslp);
+	if (!dslp) {
+		/* The spec says 2ms should be the default, but it's too small
+		 * for some machines. */
+		dslp = 50;
+	} else if (dslp > MAX_DSLP) {
+		/* Hey bios, trust must be earned. */
+		DRM_INFO_ONCE("ACPI BIOS requests an excessive sleep of %u ms, "
+			      "using %u ms instead\n", dslp, MAX_DSLP);
+		dslp = MAX_DSLP;
+	}
+
+	/* The spec tells us to do this, but we are the only user... */
+	scic = ioread32(&swsci->scic);
+	if (scic & SWSCI_SCIC_INDICATOR) {
+		DRM_DEBUG_DRIVER("SWSCI request already in progress\n");
+		return -EBUSY;
+	}
+
+	scic = function | SWSCI_SCIC_INDICATOR;
+
+	iowrite32(parm, &swsci->parm);
+	iowrite32(scic, &swsci->scic);
+
+	/* Ensure SCI event is selected and event trigger is cleared. */
+	pci_read_config_word(dev->pdev, PCI_SWSCI, &pci_swsci);
+	if (!(pci_swsci & PCI_SWSCI_SCISEL) || (pci_swsci & PCI_SWSCI_GSSCIE)) {
+		pci_swsci |= PCI_SWSCI_SCISEL;
+		pci_swsci &= ~PCI_SWSCI_GSSCIE;
+		pci_write_config_word(dev->pdev, PCI_SWSCI, pci_swsci);
+	}
+
+	/* Use event trigger to tell bios to check the mail. */
+	pci_swsci |= PCI_SWSCI_GSSCIE;
+	pci_write_config_word(dev->pdev, PCI_SWSCI, pci_swsci);
+
+	/* Poll for the result. */
+#define C (((scic = ioread32(&swsci->scic)) & SWSCI_SCIC_INDICATOR) == 0)
+	if (wait_for(C, dslp)) {
+		DRM_DEBUG_DRIVER("SWSCI request timed out\n");
+		return -ETIMEDOUT;
+	}
+
+	scic = (scic & SWSCI_SCIC_EXIT_STATUS_MASK) >>
+		SWSCI_SCIC_EXIT_STATUS_SHIFT;
+
+	/* Note: scic == 0 is an error! */
+	if (scic != SWSCI_SCIC_EXIT_STATUS_SUCCESS) {
+		DRM_DEBUG_DRIVER("SWSCI request error %u\n", scic);
+		return -EIO;
+	}
+
+	if (parm_out)
+		*parm_out = ioread32(&swsci->parm);
+
+	return 0;
+
+#undef C
+}
+
+#define DISPLAY_TYPE_CRT			0
+#define DISPLAY_TYPE_TV				1
+#define DISPLAY_TYPE_EXTERNAL_FLAT_PANEL	2
+#define DISPLAY_TYPE_INTERNAL_FLAT_PANEL	3
+
+int intel_opregion_notify_encoder(struct intel_encoder *intel_encoder,
+				  bool enable)
+{
+	struct drm_device *dev = intel_encoder->base.dev;
+	u32 parm = 0;
+	u32 type = 0;
+	u32 port;
+
+	/* don't care about old stuff for now */
+	if (!HAS_DDI(dev))
+		return 0;
+
+	port = intel_ddi_get_encoder_port(intel_encoder);
+	if (port == PORT_E) {
+		port = 0;
+	} else {
+		parm |= 1 << port;
+		port++;
+	}
+
+	if (!enable)
+		parm |= 4 << 8;
+
+	switch (intel_encoder->type) {
+	case INTEL_OUTPUT_ANALOG:
+		type = DISPLAY_TYPE_CRT;
+		break;
+	case INTEL_OUTPUT_UNKNOWN:
+	case INTEL_OUTPUT_DISPLAYPORT:
+	case INTEL_OUTPUT_HDMI:
+	case INTEL_OUTPUT_DP_MST:
+		type = DISPLAY_TYPE_EXTERNAL_FLAT_PANEL;
+		break;
+	case INTEL_OUTPUT_EDP:
+		type = DISPLAY_TYPE_INTERNAL_FLAT_PANEL;
+		break;
+	default:
+		WARN_ONCE(1, "unsupported intel_encoder type %d\n",
+			  intel_encoder->type);
+		return -EINVAL;
+	}
+
+	parm |= type << (16 + port * 3);
+
+	return swsci(dev, SWSCI_SBCB_DISPLAY_POWER_STATE, parm, NULL);
+}
+
+static const struct {
+	pci_power_t pci_power_state;
+	u32 parm;
+} power_state_map[] = {
+	{ PCI_D0,	0x00 },
+	{ PCI_D1,	0x01 },
+	{ PCI_D2,	0x02 },
+	{ PCI_D3hot,	0x04 },
+	{ PCI_D3cold,	0x04 },
+};
+
+int intel_opregion_notify_adapter(struct drm_device *dev, pci_power_t state)
+{
+	int i;
+
+	if (!HAS_DDI(dev))
+		return 0;
+
+	for (i = 0; i < ARRAY_SIZE(power_state_map); i++) {
+		if (state == power_state_map[i].pci_power_state)
+			return swsci(dev, SWSCI_SBCB_ADAPTER_POWER_STATE,
+				     power_state_map[i].parm, NULL);
+	}
+
+	return -EINVAL;
+}
+
+/*
+ * If the vendor backlight interface is not in use and ACPI backlight interface
+ * is broken, do not bother processing backlight change requests from firmware.
+ */
+static bool should_ignore_backlight_request(void)
+{
+	return acpi_video_backlight_support() &&
+	       !acpi_video_verify_backlight_support();
+}
+
+static u32 asle_set_backlight(struct drm_device *dev, u32 bclp)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_connector *intel_connector;
+	struct opregion_asle __iomem *asle = dev_priv->opregion.asle;
+
+	DRM_DEBUG_DRIVER("bclp = 0x%08x\n", bclp);
+
+	if (should_ignore_backlight_request()) {
+		DRM_DEBUG_KMS("opregion backlight request ignored\n");
+		return 0;
+	}
+
+	if (!(bclp & ASLE_BCLP_VALID))
+		return ASLC_BACKLIGHT_FAILED;
+
+	bclp &= ASLE_BCLP_MSK;
+	if (bclp > 255)
+		return ASLC_BACKLIGHT_FAILED;
+
+	drm_modeset_lock(&dev->mode_config.connection_mutex, NULL);
+
+	/*
+	 * Update backlight on all connectors that support backlight (usually
+	 * only one).
+	 */
+	DRM_DEBUG_KMS("updating opregion backlight %d/255\n", bclp);
+	list_for_each_entry(intel_connector, &dev->mode_config.connector_list, base.head)
+		intel_panel_set_backlight_acpi(intel_connector, bclp, 255);
+	iowrite32(DIV_ROUND_UP(bclp * 100, 255) | ASLE_CBLV_VALID, &asle->cblv);
+
+	drm_modeset_unlock(&dev->mode_config.connection_mutex);
+
+
+	return 0;
+}
+
+static u32 asle_set_als_illum(struct drm_device *dev, u32 alsi)
+{
+	/* alsi is the current ALS reading in lux. 0 indicates below sensor
+	   range, 0xffff indicates above sensor range. 1-0xfffe are valid */
+	DRM_DEBUG_DRIVER("Illum is not supported\n");
+	return ASLC_ALS_ILLUM_FAILED;
+}
+
+static u32 asle_set_pwm_freq(struct drm_device *dev, u32 pfmb)
+{
+	DRM_DEBUG_DRIVER("PWM freq is not supported\n");
+	return ASLC_PWM_FREQ_FAILED;
+}
+
+static u32 asle_set_pfit(struct drm_device *dev, u32 pfit)
+{
+	/* Panel fitting is currently controlled by the X code, so this is a
+	   noop until modesetting support works fully */
+	DRM_DEBUG_DRIVER("Pfit is not supported\n");
+	return ASLC_PFIT_FAILED;
+}
+
+static u32 asle_set_supported_rotation_angles(struct drm_device *dev, u32 srot)
+{
+	DRM_DEBUG_DRIVER("SROT is not supported\n");
+	return ASLC_ROTATION_ANGLES_FAILED;
+}
+
+static u32 asle_set_button_array(struct drm_device *dev, u32 iuer)
+{
+	if (!iuer)
+		DRM_DEBUG_DRIVER("Button array event is not supported (nothing)\n");
+	if (iuer & ASLE_IUER_ROTATION_LOCK_BTN)
+		DRM_DEBUG_DRIVER("Button array event is not supported (rotation lock)\n");
+	if (iuer & ASLE_IUER_VOLUME_DOWN_BTN)
+		DRM_DEBUG_DRIVER("Button array event is not supported (volume down)\n");
+	if (iuer & ASLE_IUER_VOLUME_UP_BTN)
+		DRM_DEBUG_DRIVER("Button array event is not supported (volume up)\n");
+	if (iuer & ASLE_IUER_WINDOWS_BTN)
+		DRM_DEBUG_DRIVER("Button array event is not supported (windows)\n");
+	if (iuer & ASLE_IUER_POWER_BTN)
+		DRM_DEBUG_DRIVER("Button array event is not supported (power)\n");
+
+	return ASLC_BUTTON_ARRAY_FAILED;
+}
+
+static u32 asle_set_convertible(struct drm_device *dev, u32 iuer)
+{
+	if (iuer & ASLE_IUER_CONVERTIBLE)
+		DRM_DEBUG_DRIVER("Convertible is not supported (clamshell)\n");
+	else
+		DRM_DEBUG_DRIVER("Convertible is not supported (slate)\n");
+
+	return ASLC_CONVERTIBLE_FAILED;
+}
+
+static u32 asle_set_docking(struct drm_device *dev, u32 iuer)
+{
+	if (iuer & ASLE_IUER_DOCKING)
+		DRM_DEBUG_DRIVER("Docking is not supported (docked)\n");
+	else
+		DRM_DEBUG_DRIVER("Docking is not supported (undocked)\n");
+
+	return ASLC_DOCKING_FAILED;
+}
+
+static u32 asle_isct_state(struct drm_device *dev)
+{
+	DRM_DEBUG_DRIVER("ISCT is not supported\n");
+	return ASLC_ISCT_STATE_FAILED;
+}
+
+static void asle_work(struct work_struct *work)
+{
+	struct intel_opregion *opregion =
+		container_of(work, struct intel_opregion, asle_work);
+	struct drm_i915_private *dev_priv =
+		container_of(opregion, struct drm_i915_private, opregion);
+	struct drm_device *dev = dev_priv->dev;
+	struct opregion_asle __iomem *asle = dev_priv->opregion.asle;
+	u32 aslc_stat = 0;
+	u32 aslc_req;
+
+	if (!asle)
+		return;
+
+	aslc_req = ioread32(&asle->aslc);
+
+	if (!(aslc_req & ASLC_REQ_MSK)) {
+		DRM_DEBUG_DRIVER("No request on ASLC interrupt 0x%08x\n",
+				 aslc_req);
+		return;
+	}
+
+	if (aslc_req & ASLC_SET_ALS_ILLUM)
+		aslc_stat |= asle_set_als_illum(dev, ioread32(&asle->alsi));
+
+	if (aslc_req & ASLC_SET_BACKLIGHT)
+		aslc_stat |= asle_set_backlight(dev, ioread32(&asle->bclp));
+
+	if (aslc_req & ASLC_SET_PFIT)
+		aslc_stat |= asle_set_pfit(dev, ioread32(&asle->pfit));
+
+	if (aslc_req & ASLC_SET_PWM_FREQ)
+		aslc_stat |= asle_set_pwm_freq(dev, ioread32(&asle->pfmb));
+
+	if (aslc_req & ASLC_SUPPORTED_ROTATION_ANGLES)
+		aslc_stat |= asle_set_supported_rotation_angles(dev,
+							ioread32(&asle->srot));
+
+	if (aslc_req & ASLC_BUTTON_ARRAY)
+		aslc_stat |= asle_set_button_array(dev, ioread32(&asle->iuer));
+
+	if (aslc_req & ASLC_CONVERTIBLE_INDICATOR)
+		aslc_stat |= asle_set_convertible(dev, ioread32(&asle->iuer));
+
+	if (aslc_req & ASLC_DOCKING_INDICATOR)
+		aslc_stat |= asle_set_docking(dev, ioread32(&asle->iuer));
+
+	if (aslc_req & ASLC_ISCT_STATE_CHANGE)
+		aslc_stat |= asle_isct_state(dev);
+
+	iowrite32(aslc_stat, &asle->aslc);
+}
+
+void intel_opregion_asle_intr(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	if (dev_priv->opregion.asle)
+		schedule_work(&dev_priv->opregion.asle_work);
+}
+
+#define ACPI_EV_DISPLAY_SWITCH (1<<0)
+#define ACPI_EV_LID            (1<<1)
+#define ACPI_EV_DOCK           (1<<2)
+
+static struct intel_opregion *system_opregion;
+
+static int intel_opregion_video_event(struct notifier_block *nb,
+				      unsigned long val, void *data)
+{
+	/* The only video events relevant to opregion are 0x80. These indicate
+	   either a docking event, lid switch or display switch request. In
+	   Linux, these are handled by the dock, button and video drivers.
+	*/
+
+	struct opregion_acpi __iomem *acpi;
+	struct acpi_bus_event *event = data;
+	int ret = NOTIFY_OK;
+
+	if (strcmp(event->device_class, ACPI_VIDEO_CLASS) != 0)
+		return NOTIFY_DONE;
+
+	if (!system_opregion)
+		return NOTIFY_DONE;
+
+	acpi = system_opregion->acpi;
+
+	if (event->type == 0x80 &&
+	    (ioread32(&acpi->cevt) & 1) == 0)
+		ret = NOTIFY_BAD;
+
+	iowrite32(0, &acpi->csts);
+
+	return ret;
+}
+
+static struct notifier_block intel_opregion_notifier = {
+	.notifier_call = intel_opregion_video_event,
+};
+
+/*
+ * Initialise the DIDL field in opregion. This passes a list of devices to
+ * the firmware. Values are defined by section B.4.2 of the ACPI specification
+ * (version 3)
+ */
+
+static void intel_didl_outputs(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_opregion *opregion = &dev_priv->opregion;
+	struct drm_connector *connector;
+	acpi_handle handle;
+	struct acpi_device *acpi_dev, *acpi_cdev, *acpi_video_bus = NULL;
+	unsigned long long device_id;
+	acpi_status status;
+	u32 temp;
+	int i = 0;
+
+	handle = ACPI_HANDLE(&dev->pdev->dev);
+	if (!handle || acpi_bus_get_device(handle, &acpi_dev))
+		return;
+
+	if (acpi_is_video_device(handle))
+		acpi_video_bus = acpi_dev;
+	else {
+		list_for_each_entry(acpi_cdev, &acpi_dev->children, node) {
+			if (acpi_is_video_device(acpi_cdev->handle)) {
+				acpi_video_bus = acpi_cdev;
+				break;
+			}
+		}
+	}
+
+	if (!acpi_video_bus) {
+		pr_warn("No ACPI video bus found\n");
+		return;
+	}
+
+	list_for_each_entry(acpi_cdev, &acpi_video_bus->children, node) {
+		if (i >= 8) {
+			dev_dbg(&dev->pdev->dev,
+				"More than 8 outputs detected via ACPI\n");
+			return;
+		}
+		status =
+			acpi_evaluate_integer(acpi_cdev->handle, "_ADR",
+						NULL, &device_id);
+		if (ACPI_SUCCESS(status)) {
+			if (!device_id)
+				goto blind_set;
+			iowrite32((u32)(device_id & 0x0f0f),
+				  &opregion->acpi->didl[i]);
+			i++;
+		}
+	}
+
+end:
+	/* If fewer than 8 outputs, the list must be null terminated */
+	if (i < 8)
+		iowrite32(0, &opregion->acpi->didl[i]);
+	return;
+
+blind_set:
+	i = 0;
+	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+		int output_type = ACPI_OTHER_OUTPUT;
+		if (i >= 8) {
+			dev_dbg(&dev->pdev->dev,
+				"More than 8 outputs in connector list\n");
+			return;
+		}
+		switch (connector->connector_type) {
+		case DRM_MODE_CONNECTOR_VGA:
+		case DRM_MODE_CONNECTOR_DVIA:
+			output_type = ACPI_VGA_OUTPUT;
+			break;
+		case DRM_MODE_CONNECTOR_Composite:
+		case DRM_MODE_CONNECTOR_SVIDEO:
+		case DRM_MODE_CONNECTOR_Component:
+		case DRM_MODE_CONNECTOR_9PinDIN:
+			output_type = ACPI_TV_OUTPUT;
+			break;
+		case DRM_MODE_CONNECTOR_DVII:
+		case DRM_MODE_CONNECTOR_DVID:
+		case DRM_MODE_CONNECTOR_DisplayPort:
+		case DRM_MODE_CONNECTOR_HDMIA:
+		case DRM_MODE_CONNECTOR_HDMIB:
+			output_type = ACPI_DIGITAL_OUTPUT;
+			break;
+		case DRM_MODE_CONNECTOR_LVDS:
+			output_type = ACPI_LVDS_OUTPUT;
+			break;
+		}
+		temp = ioread32(&opregion->acpi->didl[i]);
+		iowrite32(temp | (1<<31) | output_type | i,
+			  &opregion->acpi->didl[i]);
+		i++;
+	}
+	goto end;
+}
+
+static void intel_setup_cadls(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_opregion *opregion = &dev_priv->opregion;
+	int i = 0;
+	u32 disp_id;
+
+	/* Initialize the CADL field by duplicating the DIDL values.
+	 * Technically, this is not always correct as display outputs may exist,
+	 * but not active. This initialization is necessary for some Clevo
+	 * laptops that check this field before processing the brightness and
+	 * display switching hotkeys. Just like DIDL, CADL is NULL-terminated if
+	 * there are less than eight devices. */
+	do {
+		disp_id = ioread32(&opregion->acpi->didl[i]);
+		iowrite32(disp_id, &opregion->acpi->cadl[i]);
+	} while (++i < 8 && disp_id != 0);
+}
+
+void intel_opregion_init(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_opregion *opregion = &dev_priv->opregion;
+
+	if (!opregion->header)
+		return;
+
+	if (opregion->acpi) {
+		intel_didl_outputs(dev);
+		intel_setup_cadls(dev);
+
+		/* Notify BIOS we are ready to handle ACPI video ext notifs.
+		 * Right now, all the events are handled by the ACPI video module.
+		 * We don't actually need to do anything with them. */
+		iowrite32(0, &opregion->acpi->csts);
+		iowrite32(1, &opregion->acpi->drdy);
+
+		system_opregion = opregion;
+		register_acpi_notifier(&intel_opregion_notifier);
+	}
+
+	if (opregion->asle) {
+		iowrite32(ASLE_TCHE_BLC_EN, &opregion->asle->tche);
+		iowrite32(ASLE_ARDY_READY, &opregion->asle->ardy);
+	}
+}
+
+void intel_opregion_fini(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_opregion *opregion = &dev_priv->opregion;
+
+	if (!opregion->header)
+		return;
+
+	if (opregion->asle)
+		iowrite32(ASLE_ARDY_NOT_READY, &opregion->asle->ardy);
+
+	cancel_work_sync(&dev_priv->opregion.asle_work);
+
+	if (opregion->acpi) {
+		iowrite32(0, &opregion->acpi->drdy);
+
+		system_opregion = NULL;
+		unregister_acpi_notifier(&intel_opregion_notifier);
+	}
+
+	/* just clear all opregion memory pointers now */
+	iounmap(opregion->header);
+	opregion->header = NULL;
+	opregion->acpi = NULL;
+	opregion->swsci = NULL;
+	opregion->asle = NULL;
+	opregion->vbt = NULL;
+	opregion->lid_state = NULL;
+}
+
+static void swsci_setup(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_opregion *opregion = &dev_priv->opregion;
+	bool requested_callbacks = false;
+	u32 tmp;
+
+	/* Sub-function code 0 is okay, let's allow them. */
+	opregion->swsci_gbda_sub_functions = 1;
+	opregion->swsci_sbcb_sub_functions = 1;
+
+	/* We use GBDA to ask for supported GBDA calls. */
+	if (swsci(dev, SWSCI_GBDA_SUPPORTED_CALLS, 0, &tmp) == 0) {
+		/* make the bits match the sub-function codes */
+		tmp <<= 1;
+		opregion->swsci_gbda_sub_functions |= tmp;
+	}
+
+	/*
+	 * We also use GBDA to ask for _requested_ SBCB callbacks. The driver
+	 * must not call interfaces that are not specifically requested by the
+	 * bios.
+	 */
+	if (swsci(dev, SWSCI_GBDA_REQUESTED_CALLBACKS, 0, &tmp) == 0) {
+		/* here, the bits already match sub-function codes */
+		opregion->swsci_sbcb_sub_functions |= tmp;
+		requested_callbacks = true;
+	}
+
+	/*
+	 * But we use SBCB to ask for _supported_ SBCB calls. This does not mean
+	 * the callback is _requested_. But we still can't call interfaces that
+	 * are not requested.
+	 */
+	if (swsci(dev, SWSCI_SBCB_SUPPORTED_CALLBACKS, 0, &tmp) == 0) {
+		/* make the bits match the sub-function codes */
+		u32 low = tmp & 0x7ff;
+		u32 high = tmp & ~0xfff; /* bit 11 is reserved */
+		tmp = (high << 4) | (low << 1) | 1;
+
+		/* best guess what to do with supported wrt requested */
+		if (requested_callbacks) {
+			u32 req = opregion->swsci_sbcb_sub_functions;
+			if ((req & tmp) != req)
+				DRM_DEBUG_DRIVER("SWSCI BIOS requested (%08x) SBCB callbacks that are not supported (%08x)\n", req, tmp);
+			/* XXX: for now, trust the requested callbacks */
+			/* opregion->swsci_sbcb_sub_functions &= tmp; */
+		} else {
+			opregion->swsci_sbcb_sub_functions |= tmp;
+		}
+	}
+
+	DRM_DEBUG_DRIVER("SWSCI GBDA callbacks %08x, SBCB callbacks %08x\n",
+			 opregion->swsci_gbda_sub_functions,
+			 opregion->swsci_sbcb_sub_functions);
+}
+#else /* CONFIG_ACPI */
+static inline void swsci_setup(struct drm_device *dev) {}
+#endif  /* CONFIG_ACPI */
+
+int intel_opregion_setup(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_opregion *opregion = &dev_priv->opregion;
+	void __iomem *base;
+	u32 asls, mboxes;
+	char buf[sizeof(OPREGION_SIGNATURE)];
+	int err = 0;
+
+	pci_read_config_dword(dev->pdev, PCI_ASLS, &asls);
+	DRM_DEBUG_DRIVER("graphic opregion physical addr: 0x%x\n", asls);
+	if (asls == 0) {
+		DRM_DEBUG_DRIVER("ACPI OpRegion not supported!\n");
+		return -ENOTSUPP;
+	}
+
+#ifdef CONFIG_ACPI
+	INIT_WORK(&opregion->asle_work, asle_work);
+#endif
+
+	base = acpi_os_ioremap(asls, OPREGION_SIZE);
+	if (!base)
+		return -ENOMEM;
+
+	memcpy_fromio(buf, base, sizeof(buf));
+
+	if (memcmp(buf, OPREGION_SIGNATURE, 16)) {
+		DRM_DEBUG_DRIVER("opregion signature mismatch\n");
+		err = -EINVAL;
+		goto err_out;
+	}
+	opregion->header = base;
+	opregion->vbt = base + OPREGION_VBT_OFFSET;
+
+	opregion->lid_state = base + ACPI_CLID;
+
+	mboxes = ioread32(&opregion->header->mboxes);
+	if (mboxes & MBOX_ACPI) {
+		DRM_DEBUG_DRIVER("Public ACPI methods supported\n");
+		opregion->acpi = base + OPREGION_ACPI_OFFSET;
+	}
+
+	if (mboxes & MBOX_SWSCI) {
+		DRM_DEBUG_DRIVER("SWSCI supported\n");
+		opregion->swsci = base + OPREGION_SWSCI_OFFSET;
+		swsci_setup(dev);
+	}
+	if (mboxes & MBOX_ASLE) {
+		DRM_DEBUG_DRIVER("ASLE supported\n");
+		opregion->asle = base + OPREGION_ASLE_OFFSET;
+
+		iowrite32(ASLE_ARDY_NOT_READY, &opregion->asle->ardy);
+	}
+
+	return 0;
+
+err_out:
+	iounmap(base);
+	return err;
+}