Initial import

1 files changed, 317 insertions, 0 deletions

diff --git a/drivers/hwmon/hwmon-vid.c b/drivers/hwmon/hwmon-vid.c
new file mode 100644
index 000000000..ef91b8a67
--- /dev/null
+++ b/drivers/hwmon/hwmon-vid.c
@@ -0,0 +1,317 @@
+/*
+ * hwmon-vid.c - VID/VRM/VRD voltage conversions
+ *
+ * Copyright (c) 2004 Rudolf Marek <r.marek@assembler.cz>
+ *
+ * Partly imported from i2c-vid.h of the lm_sensors project
+ * Copyright (c) 2002 Mark D. Studebaker <mdsxyz123@yahoo.com>
+ * With assistance from Trent Piepho <xyzzy@speakeasy.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/hwmon-vid.h>
+
+/*
+ * Common code for decoding VID pins.
+ *
+ * References:
+ *
+ * For VRM 8.4 to 9.1, "VRM x.y DC-DC Converter Design Guidelines",
+ * available at http://developer.intel.com/.
+ *
+ * For VRD 10.0 and up, "VRD x.y Design Guide",
+ * available at http://developer.intel.com/.
+ *
+ * AMD Athlon 64 and AMD Opteron Processors, AMD Publication 26094,
+ * http://support.amd.com/us/Processor_TechDocs/26094.PDF
+ * Table 74. VID Code Voltages
+ * This corresponds to an arbitrary VRM code of 24 in the functions below.
+ * These CPU models (K8 revision <= E) have 5 VID pins. See also:
+ * Revision Guide for AMD Athlon 64 and AMD Opteron Processors, AMD Publication 25759,
+ * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/25759.pdf
+ *
+ * AMD NPT Family 0Fh Processors, AMD Publication 32559,
+ * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/32559.pdf
+ * Table 71. VID Code Voltages
+ * This corresponds to an arbitrary VRM code of 25 in the functions below.
+ * These CPU models (K8 revision >= F) have 6 VID pins. See also:
+ * Revision Guide for AMD NPT Family 0Fh Processors, AMD Publication 33610,
+ * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/33610.pdf
+ *
+ * The 17 specification is in fact Intel Mobile Voltage Positioning -
+ * (IMVP-II). You can find more information in the datasheet of Max1718
+ * http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2452
+ *
+ * The 13 specification corresponds to the Intel Pentium M series. There
+ * doesn't seem to be any named specification for these. The conversion
+ * tables are detailed directly in the various Pentium M datasheets:
+ * http://www.intel.com/design/intarch/pentiumm/docs_pentiumm.htm
+ *
+ * The 14 specification corresponds to Intel Core series. There
+ * doesn't seem to be any named specification for these. The conversion
+ * tables are detailed directly in the various Pentium Core datasheets:
+ * http://www.intel.com/design/mobile/datashts/309221.htm
+ *
+ * The 110 (VRM 11) specification corresponds to Intel Conroe based series.
+ * http://www.intel.com/design/processor/applnots/313214.htm
+ */
+
+/*
+ * vrm is the VRM/VRD document version multiplied by 10.
+ * val is the 4-bit or more VID code.
+ * Returned value is in mV to avoid floating point in the kernel.
+ * Some VID have some bits in uV scale, this is rounded to mV.
+ */
+int vid_from_reg(int val, u8 vrm)
+{
+	int vid;
+
+	switch (vrm) {
+
+	case 100:		/* VRD 10.0 */
+		/* compute in uV, round to mV */
+		val &= 0x3f;
+		if ((val & 0x1f) == 0x1f)
+			return 0;
+		if ((val & 0x1f) <= 0x09 || val == 0x0a)
+			vid = 1087500 - (val & 0x1f) * 25000;
+		else
+			vid = 1862500 - (val & 0x1f) * 25000;
+		if (val & 0x20)
+			vid -= 12500;
+		return (vid + 500) / 1000;
+
+	case 110:		/* Intel Conroe */
+				/* compute in uV, round to mV */
+		val &= 0xff;
+		if (val < 0x02 || val > 0xb2)
+			return 0;
+		return (1600000 - (val - 2) * 6250 + 500) / 1000;
+
+	case 24:		/* Athlon64 & Opteron */
+		val &= 0x1f;
+		if (val == 0x1f)
+			return 0;
+				/* fall through */
+	case 25:		/* AMD NPT 0Fh */
+		val &= 0x3f;
+		return (val < 32) ? 1550 - 25 * val
+			: 775 - (25 * (val - 31)) / 2;
+
+	case 26:		/* AMD family 10h to 15h, serial VID */
+		val &= 0x7f;
+		if (val >= 0x7c)
+			return 0;
+		return DIV_ROUND_CLOSEST(15500 - 125 * val, 10);
+
+	case 91:		/* VRM 9.1 */
+	case 90:		/* VRM 9.0 */
+		val &= 0x1f;
+		return val == 0x1f ? 0 :
+				     1850 - val * 25;
+
+	case 85:		/* VRM 8.5 */
+		val &= 0x1f;
+		return (val & 0x10  ? 25 : 0) +
+		       ((val & 0x0f) > 0x04 ? 2050 : 1250) -
+		       ((val & 0x0f) * 50);
+
+	case 84:		/* VRM 8.4 */
+		val &= 0x0f;
+				/* fall through */
+	case 82:		/* VRM 8.2 */
+		val &= 0x1f;
+		return val == 0x1f ? 0 :
+		       val & 0x10  ? 5100 - (val) * 100 :
+				     2050 - (val) * 50;
+	case 17:		/* Intel IMVP-II */
+		val &= 0x1f;
+		return val & 0x10 ? 975 - (val & 0xF) * 25 :
+				    1750 - val * 50;
+	case 13:
+	case 131:
+		val &= 0x3f;
+		/* Exception for Eden ULV 500 MHz */
+		if (vrm == 131 && val == 0x3f)
+			val++;
+		return 1708 - val * 16;
+	case 14:		/* Intel Core */
+				/* compute in uV, round to mV */
+		val &= 0x7f;
+		return val > 0x77 ? 0 : (1500000 - (val * 12500) + 500) / 1000;
+	default:		/* report 0 for unknown */
+		if (vrm)
+			pr_warn("Requested unsupported VRM version (%u)\n",
+				(unsigned int)vrm);
+		return 0;
+	}
+}
+EXPORT_SYMBOL(vid_from_reg);
+
+/*
+ * After this point is the code to automatically determine which
+ * VRM/VRD specification should be used depending on the CPU.
+ */
+
+struct vrm_model {
+	u8 vendor;
+	u8 family;
+	u8 model_from;
+	u8 model_to;
+	u8 stepping_to;
+	u8 vrm_type;
+};
+
+#define ANY 0xFF
+
+#ifdef CONFIG_X86
+
+/*
+ * The stepping_to parameter is highest acceptable stepping for current line.
+ * The model match must be exact for 4-bit values. For model values 0x10
+ * and above (extended model), all models below the parameter will match.
+ */
+
+static struct vrm_model vrm_models[] = {
+	{X86_VENDOR_AMD, 0x6, 0x0, ANY, ANY, 90},	/* Athlon Duron etc */
+	{X86_VENDOR_AMD, 0xF, 0x0, 0x3F, ANY, 24},	/* Athlon 64, Opteron */
+	/*
+	 * In theory, all NPT family 0Fh processors have 6 VID pins and should
+	 * thus use vrm 25, however in practice not all mainboards route the
+	 * 6th VID pin because it is never needed. So we use the 5 VID pin
+	 * variant (vrm 24) for the models which exist today.
+	 */
+	{X86_VENDOR_AMD, 0xF, 0x40, 0x7F, ANY, 24},	/* NPT family 0Fh */
+	{X86_VENDOR_AMD, 0xF, 0x80, ANY, ANY, 25},	/* future fam. 0Fh */
+	{X86_VENDOR_AMD, 0x10, 0x0, ANY, ANY, 25},	/* NPT family 10h */
+	{X86_VENDOR_AMD, 0x11, 0x0, ANY, ANY, 26},	/* family 11h */
+	{X86_VENDOR_AMD, 0x12, 0x0, ANY, ANY, 26},	/* family 12h */
+	{X86_VENDOR_AMD, 0x14, 0x0, ANY, ANY, 26},	/* family 14h */
+	{X86_VENDOR_AMD, 0x15, 0x0, ANY, ANY, 26},	/* family 15h */
+
+	{X86_VENDOR_INTEL, 0x6, 0x0, 0x6, ANY, 82},	/* Pentium Pro,
+							 * Pentium II, Xeon,
+							 * Mobile Pentium,
+							 * Celeron */
+	{X86_VENDOR_INTEL, 0x6, 0x7, 0x7, ANY, 84},	/* Pentium III, Xeon */
+	{X86_VENDOR_INTEL, 0x6, 0x8, 0x8, ANY, 82},	/* Pentium III, Xeon */
+	{X86_VENDOR_INTEL, 0x6, 0x9, 0x9, ANY, 13},	/* Pentium M (130 nm) */
+	{X86_VENDOR_INTEL, 0x6, 0xA, 0xA, ANY, 82},	/* Pentium III Xeon */
+	{X86_VENDOR_INTEL, 0x6, 0xB, 0xB, ANY, 85},	/* Tualatin */
+	{X86_VENDOR_INTEL, 0x6, 0xD, 0xD, ANY, 13},	/* Pentium M (90 nm) */
+	{X86_VENDOR_INTEL, 0x6, 0xE, 0xE, ANY, 14},	/* Intel Core (65 nm) */
+	{X86_VENDOR_INTEL, 0x6, 0xF, ANY, ANY, 110},	/* Intel Conroe and
+							 * later */
+	{X86_VENDOR_INTEL, 0xF, 0x0, 0x0, ANY, 90},	/* P4 */
+	{X86_VENDOR_INTEL, 0xF, 0x1, 0x1, ANY, 90},	/* P4 Willamette */
+	{X86_VENDOR_INTEL, 0xF, 0x2, 0x2, ANY, 90},	/* P4 Northwood */
+	{X86_VENDOR_INTEL, 0xF, 0x3, ANY, ANY, 100},	/* Prescott and above
+							 * assume VRD 10 */
+
+	{X86_VENDOR_CENTAUR, 0x6, 0x7, 0x7, ANY, 85},	/* Eden ESP/Ezra */
+	{X86_VENDOR_CENTAUR, 0x6, 0x8, 0x8, 0x7, 85},	/* Ezra T */
+	{X86_VENDOR_CENTAUR, 0x6, 0x9, 0x9, 0x7, 85},	/* Nehemiah */
+	{X86_VENDOR_CENTAUR, 0x6, 0x9, 0x9, ANY, 17},	/* C3-M, Eden-N */
+	{X86_VENDOR_CENTAUR, 0x6, 0xA, 0xA, 0x7, 0},	/* No information */
+	{X86_VENDOR_CENTAUR, 0x6, 0xA, 0xA, ANY, 13},	/* C7-M, C7,
+							 * Eden (Esther) */
+	{X86_VENDOR_CENTAUR, 0x6, 0xD, 0xD, ANY, 134},	/* C7-D, C7-M, C7,
+							 * Eden (Esther) */
+};
+
+/*
+ * Special case for VIA model D: there are two different possible
+ * VID tables, so we have to figure out first, which one must be
+ * used. This resolves temporary drm value 134 to 14 (Intel Core
+ * 7-bit VID), 13 (Pentium M 6-bit VID) or 131 (Pentium M 6-bit VID
+ * + quirk for Eden ULV 500 MHz).
+ * Note: something similar might be needed for model A, I'm not sure.
+ */
+static u8 get_via_model_d_vrm(void)
+{
+	unsigned int vid, brand, __maybe_unused dummy;
+	static const char *brands[4] = {
+		"C7-M", "C7", "Eden", "C7-D"
+	};
+
+	rdmsr(0x198, dummy, vid);
+	vid &= 0xff;
+
+	rdmsr(0x1154, brand, dummy);
+	brand = ((brand >> 4) ^ (brand >> 2)) & 0x03;
+
+	if (vid > 0x3f) {
+		pr_info("Using %d-bit VID table for VIA %s CPU\n",
+			7, brands[brand]);
+		return 14;
+	} else {
+		pr_info("Using %d-bit VID table for VIA %s CPU\n",
+			6, brands[brand]);
+		/* Enable quirk for Eden */
+		return brand == 2 ? 131 : 13;
+	}
+}
+
+static u8 find_vrm(u8 family, u8 model, u8 stepping, u8 vendor)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(vrm_models); i++) {
+		if (vendor == vrm_models[i].vendor &&
+		    family == vrm_models[i].family &&
+		    model >= vrm_models[i].model_from &&
+		    model <= vrm_models[i].model_to &&
+		    stepping <= vrm_models[i].stepping_to)
+			return vrm_models[i].vrm_type;
+	}
+
+	return 0;
+}
+
+u8 vid_which_vrm(void)
+{
+	struct cpuinfo_x86 *c = &cpu_data(0);
+	u8 vrm_ret;
+
+	if (c->x86 < 6)		/* Any CPU with family lower than 6 */
+		return 0;	/* doesn't have VID */
+
+	vrm_ret = find_vrm(c->x86, c->x86_model, c->x86_mask, c->x86_vendor);
+	if (vrm_ret == 134)
+		vrm_ret = get_via_model_d_vrm();
+	if (vrm_ret == 0)
+		pr_info("Unknown VRM version of your x86 CPU\n");
+	return vrm_ret;
+}
+
+/* and now for something completely different for the non-x86 world */
+#else
+u8 vid_which_vrm(void)
+{
+	pr_info("Unknown VRM version of your CPU\n");
+	return 0;
+}
+#endif
+EXPORT_SYMBOL(vid_which_vrm);
+
+MODULE_AUTHOR("Rudolf Marek <r.marek@assembler.cz>");
+
+MODULE_DESCRIPTION("hwmon-vid driver");
+MODULE_LICENSE("GPL");