summaryrefslogtreecommitdiff
path: root/drivers/hwmon/ltc4260.c
diff options
context:
space:
mode:
authorAndré Fabian Silva Delgado <emulatorman@parabola.nu>2015-08-05 17:04:01 -0300
committerAndré Fabian Silva Delgado <emulatorman@parabola.nu>2015-08-05 17:04:01 -0300
commit57f0f512b273f60d52568b8c6b77e17f5636edc0 (patch)
tree5e910f0e82173f4ef4f51111366a3f1299037a7b /drivers/hwmon/ltc4260.c
Initial import
Diffstat (limited to 'drivers/hwmon/ltc4260.c')
-rw-r--r--drivers/hwmon/ltc4260.c200
1 files changed, 200 insertions, 0 deletions
diff --git a/drivers/hwmon/ltc4260.c b/drivers/hwmon/ltc4260.c
new file mode 100644
index 000000000..afb09574b
--- /dev/null
+++ b/drivers/hwmon/ltc4260.c
@@ -0,0 +1,200 @@
+/*
+ * Driver for Linear Technology LTC4260 I2C Positive Voltage Hot Swap Controller
+ *
+ * Copyright (c) 2014 Guenter Roeck
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/jiffies.h>
+#include <linux/regmap.h>
+
+/* chip registers */
+#define LTC4260_CONTROL 0x00
+#define LTC4260_ALERT 0x01
+#define LTC4260_STATUS 0x02
+#define LTC4260_FAULT 0x03
+#define LTC4260_SENSE 0x04
+#define LTC4260_SOURCE 0x05
+#define LTC4260_ADIN 0x06
+
+/*
+ * Fault register bits
+ */
+#define FAULT_OV (1 << 0)
+#define FAULT_UV (1 << 1)
+#define FAULT_OC (1 << 2)
+#define FAULT_POWER_BAD (1 << 3)
+#define FAULT_FET_SHORT (1 << 5)
+
+/* Return the voltage from the given register in mV or mA */
+static int ltc4260_get_value(struct device *dev, u8 reg)
+{
+ struct regmap *regmap = dev_get_drvdata(dev);
+ unsigned int val;
+ int ret;
+
+ ret = regmap_read(regmap, reg, &val);
+ if (ret < 0)
+ return ret;
+
+ switch (reg) {
+ case LTC4260_ADIN:
+ /* 10 mV resolution. Convert to mV. */
+ val = val * 10;
+ break;
+ case LTC4260_SOURCE:
+ /* 400 mV resolution. Convert to mV. */
+ val = val * 400;
+ break;
+ case LTC4260_SENSE:
+ /*
+ * 300 uV resolution. Convert to current as measured with
+ * an 1 mOhm sense resistor, in mA. If a different sense
+ * resistor is installed, calculate the actual current by
+ * dividing the reported current by the sense resistor value
+ * in mOhm.
+ */
+ val = val * 300;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return val;
+}
+
+static ssize_t ltc4260_show_value(struct device *dev,
+ struct device_attribute *da, char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ int value;
+
+ value = ltc4260_get_value(dev, attr->index);
+ if (value < 0)
+ return value;
+ return snprintf(buf, PAGE_SIZE, "%d\n", value);
+}
+
+static ssize_t ltc4260_show_bool(struct device *dev,
+ struct device_attribute *da, char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ struct regmap *regmap = dev_get_drvdata(dev);
+ unsigned int fault;
+ int ret;
+
+ ret = regmap_read(regmap, LTC4260_FAULT, &fault);
+ if (ret < 0)
+ return ret;
+
+ fault &= attr->index;
+ if (fault) /* Clear reported faults in chip register */
+ regmap_update_bits(regmap, LTC4260_FAULT, attr->index, 0);
+
+ return snprintf(buf, PAGE_SIZE, "%d\n", !!fault);
+}
+
+/* Voltages */
+static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, ltc4260_show_value, NULL,
+ LTC4260_SOURCE);
+static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, ltc4260_show_value, NULL,
+ LTC4260_ADIN);
+
+/*
+ * Voltage alarms
+ * UV/OV faults are associated with the input voltage, and the POWER BAD and
+ * FET SHORT faults are associated with the output voltage.
+ */
+static SENSOR_DEVICE_ATTR(in1_min_alarm, S_IRUGO, ltc4260_show_bool, NULL,
+ FAULT_UV);
+static SENSOR_DEVICE_ATTR(in1_max_alarm, S_IRUGO, ltc4260_show_bool, NULL,
+ FAULT_OV);
+static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, ltc4260_show_bool, NULL,
+ FAULT_POWER_BAD | FAULT_FET_SHORT);
+
+/* Current (via sense resistor) */
+static SENSOR_DEVICE_ATTR(curr1_input, S_IRUGO, ltc4260_show_value, NULL,
+ LTC4260_SENSE);
+
+/* Overcurrent alarm */
+static SENSOR_DEVICE_ATTR(curr1_max_alarm, S_IRUGO, ltc4260_show_bool, NULL,
+ FAULT_OC);
+
+static struct attribute *ltc4260_attrs[] = {
+ &sensor_dev_attr_in1_input.dev_attr.attr,
+ &sensor_dev_attr_in1_min_alarm.dev_attr.attr,
+ &sensor_dev_attr_in1_max_alarm.dev_attr.attr,
+ &sensor_dev_attr_in2_input.dev_attr.attr,
+ &sensor_dev_attr_in2_alarm.dev_attr.attr,
+
+ &sensor_dev_attr_curr1_input.dev_attr.attr,
+ &sensor_dev_attr_curr1_max_alarm.dev_attr.attr,
+
+ NULL,
+};
+ATTRIBUTE_GROUPS(ltc4260);
+
+static const struct regmap_config ltc4260_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = LTC4260_ADIN,
+};
+
+static int ltc4260_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct device *dev = &client->dev;
+ struct device *hwmon_dev;
+ struct regmap *regmap;
+
+ regmap = devm_regmap_init_i2c(client, &ltc4260_regmap_config);
+ if (IS_ERR(regmap)) {
+ dev_err(dev, "failed to allocate register map\n");
+ return PTR_ERR(regmap);
+ }
+
+ /* Clear faults */
+ regmap_write(regmap, LTC4260_FAULT, 0x00);
+
+ hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
+ regmap,
+ ltc4260_groups);
+ return PTR_ERR_OR_ZERO(hwmon_dev);
+}
+
+static const struct i2c_device_id ltc4260_id[] = {
+ {"ltc4260", 0},
+ { }
+};
+
+MODULE_DEVICE_TABLE(i2c, ltc4260_id);
+
+static struct i2c_driver ltc4260_driver = {
+ .driver = {
+ .name = "ltc4260",
+ },
+ .probe = ltc4260_probe,
+ .id_table = ltc4260_id,
+};
+
+module_i2c_driver(ltc4260_driver);
+
+MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");
+MODULE_DESCRIPTION("LTC4260 driver");
+MODULE_LICENSE("GPL");