Initial import

1 files changed, 907 insertions, 0 deletions

diff --git a/drivers/i2c/busses/i2c-bcm-kona.c b/drivers/i2c/busses/i2c-bcm-kona.c
new file mode 100644
index 000000000..2c9d9b1c8
--- /dev/null
+++ b/drivers/i2c/busses/i2c-bcm-kona.c
@@ -0,0 +1,907 @@
+/*
+ * Copyright (C) 2013 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+
+/* Hardware register offsets and field defintions */
+#define CS_OFFSET				0x00000020
+#define CS_ACK_SHIFT				3
+#define CS_ACK_MASK				0x00000008
+#define CS_ACK_CMD_GEN_START			0x00000000
+#define CS_ACK_CMD_GEN_RESTART			0x00000001
+#define CS_CMD_SHIFT				1
+#define CS_CMD_CMD_NO_ACTION			0x00000000
+#define CS_CMD_CMD_START_RESTART		0x00000001
+#define CS_CMD_CMD_STOP				0x00000002
+#define CS_EN_SHIFT				0
+#define CS_EN_CMD_ENABLE_BSC			0x00000001
+
+#define TIM_OFFSET				0x00000024
+#define TIM_PRESCALE_SHIFT			6
+#define TIM_P_SHIFT				3
+#define TIM_NO_DIV_SHIFT			2
+#define TIM_DIV_SHIFT				0
+
+#define DAT_OFFSET				0x00000028
+
+#define TOUT_OFFSET				0x0000002c
+
+#define TXFCR_OFFSET				0x0000003c
+#define TXFCR_FIFO_FLUSH_MASK			0x00000080
+#define TXFCR_FIFO_EN_MASK			0x00000040
+
+#define IER_OFFSET				0x00000044
+#define IER_READ_COMPLETE_INT_MASK		0x00000010
+#define IER_I2C_INT_EN_MASK			0x00000008
+#define IER_FIFO_INT_EN_MASK			0x00000002
+#define IER_NOACK_EN_MASK			0x00000001
+
+#define ISR_OFFSET				0x00000048
+#define ISR_RESERVED_MASK			0xffffff60
+#define ISR_CMDBUSY_MASK			0x00000080
+#define ISR_READ_COMPLETE_MASK			0x00000010
+#define ISR_SES_DONE_MASK			0x00000008
+#define ISR_ERR_MASK				0x00000004
+#define ISR_TXFIFOEMPTY_MASK			0x00000002
+#define ISR_NOACK_MASK				0x00000001
+
+#define CLKEN_OFFSET				0x0000004C
+#define CLKEN_AUTOSENSE_OFF_MASK		0x00000080
+#define CLKEN_M_SHIFT				4
+#define CLKEN_N_SHIFT				1
+#define CLKEN_CLKEN_MASK			0x00000001
+
+#define FIFO_STATUS_OFFSET			0x00000054
+#define FIFO_STATUS_RXFIFO_EMPTY_MASK		0x00000004
+#define FIFO_STATUS_TXFIFO_EMPTY_MASK		0x00000010
+
+#define HSTIM_OFFSET				0x00000058
+#define HSTIM_HS_MODE_MASK			0x00008000
+#define HSTIM_HS_HOLD_SHIFT			10
+#define HSTIM_HS_HIGH_PHASE_SHIFT		5
+#define HSTIM_HS_SETUP_SHIFT			0
+
+#define PADCTL_OFFSET				0x0000005c
+#define PADCTL_PAD_OUT_EN_MASK			0x00000004
+
+#define RXFCR_OFFSET				0x00000068
+#define RXFCR_NACK_EN_SHIFT			7
+#define RXFCR_READ_COUNT_SHIFT			0
+#define RXFIFORDOUT_OFFSET			0x0000006c
+
+/* Locally used constants */
+#define MAX_RX_FIFO_SIZE		64U /* bytes */
+#define MAX_TX_FIFO_SIZE		64U /* bytes */
+
+#define STD_EXT_CLK_FREQ		13000000UL
+#define HS_EXT_CLK_FREQ			104000000UL
+
+#define MASTERCODE			0x08 /* Mastercodes are 0000_1xxxb */
+
+#define I2C_TIMEOUT			100 /* msecs */
+
+/* Operations that can be commanded to the controller */
+enum bcm_kona_cmd_t {
+	BCM_CMD_NOACTION = 0,
+	BCM_CMD_START,
+	BCM_CMD_RESTART,
+	BCM_CMD_STOP,
+};
+
+enum bus_speed_index {
+	BCM_SPD_100K = 0,
+	BCM_SPD_400K,
+	BCM_SPD_1MHZ,
+};
+
+enum hs_bus_speed_index {
+	BCM_SPD_3P4MHZ = 0,
+};
+
+/* Internal divider settings for standard mode, fast mode and fast mode plus */
+struct bus_speed_cfg {
+	uint8_t time_m;		/* Number of cycles for setup time */
+	uint8_t time_n;		/* Number of cycles for hold time */
+	uint8_t prescale;	/* Prescale divider */
+	uint8_t time_p;		/* Timing coefficient */
+	uint8_t no_div;		/* Disable clock divider */
+	uint8_t time_div;	/* Post-prescale divider */
+};
+
+/* Internal divider settings for high-speed mode */
+struct hs_bus_speed_cfg {
+	uint8_t hs_hold;	/* Number of clock cycles SCL stays low until
+				   the end of bit period */
+	uint8_t hs_high_phase;	/* Number of clock cycles SCL stays high
+				   before it falls */
+	uint8_t hs_setup;	/* Number of clock cycles SCL stays low
+				   before it rises  */
+	uint8_t prescale;	/* Prescale divider */
+	uint8_t time_p;		/* Timing coefficient */
+	uint8_t no_div;		/* Disable clock divider */
+	uint8_t time_div;	/* Post-prescale divider */
+};
+
+static const struct bus_speed_cfg std_cfg_table[] = {
+	[BCM_SPD_100K] = {0x01, 0x01, 0x03, 0x06, 0x00, 0x02},
+	[BCM_SPD_400K] = {0x05, 0x01, 0x03, 0x05, 0x01, 0x02},
+	[BCM_SPD_1MHZ] = {0x01, 0x01, 0x03, 0x01, 0x01, 0x03},
+};
+
+static const struct hs_bus_speed_cfg hs_cfg_table[] = {
+	[BCM_SPD_3P4MHZ] = {0x01, 0x08, 0x14, 0x00, 0x06, 0x01, 0x00},
+};
+
+struct bcm_kona_i2c_dev {
+	struct device *device;
+
+	void __iomem *base;
+	int irq;
+	struct clk *external_clk;
+
+	struct i2c_adapter adapter;
+
+	struct completion done;
+
+	const struct bus_speed_cfg *std_cfg;
+	const struct hs_bus_speed_cfg *hs_cfg;
+};
+
+static void bcm_kona_i2c_send_cmd_to_ctrl(struct bcm_kona_i2c_dev *dev,
+					  enum bcm_kona_cmd_t cmd)
+{
+	dev_dbg(dev->device, "%s, %d\n", __func__, cmd);
+
+	switch (cmd) {
+	case BCM_CMD_NOACTION:
+		writel((CS_CMD_CMD_NO_ACTION << CS_CMD_SHIFT) |
+		       (CS_EN_CMD_ENABLE_BSC << CS_EN_SHIFT),
+		       dev->base + CS_OFFSET);
+		break;
+
+	case BCM_CMD_START:
+		writel((CS_ACK_CMD_GEN_START << CS_ACK_SHIFT) |
+		       (CS_CMD_CMD_START_RESTART << CS_CMD_SHIFT) |
+		       (CS_EN_CMD_ENABLE_BSC << CS_EN_SHIFT),
+		       dev->base + CS_OFFSET);
+		break;
+
+	case BCM_CMD_RESTART:
+		writel((CS_ACK_CMD_GEN_RESTART << CS_ACK_SHIFT) |
+		       (CS_CMD_CMD_START_RESTART << CS_CMD_SHIFT) |
+		       (CS_EN_CMD_ENABLE_BSC << CS_EN_SHIFT),
+		       dev->base + CS_OFFSET);
+		break;
+
+	case BCM_CMD_STOP:
+		writel((CS_CMD_CMD_STOP << CS_CMD_SHIFT) |
+		       (CS_EN_CMD_ENABLE_BSC << CS_EN_SHIFT),
+		       dev->base + CS_OFFSET);
+		break;
+
+	default:
+		dev_err(dev->device, "Unknown command %d\n", cmd);
+	}
+}
+
+static void bcm_kona_i2c_enable_clock(struct bcm_kona_i2c_dev *dev)
+{
+	writel(readl(dev->base + CLKEN_OFFSET) | CLKEN_CLKEN_MASK,
+	       dev->base + CLKEN_OFFSET);
+}
+
+static void bcm_kona_i2c_disable_clock(struct bcm_kona_i2c_dev *dev)
+{
+	writel(readl(dev->base + CLKEN_OFFSET) & ~CLKEN_CLKEN_MASK,
+	       dev->base + CLKEN_OFFSET);
+}
+
+static irqreturn_t bcm_kona_i2c_isr(int irq, void *devid)
+{
+	struct bcm_kona_i2c_dev *dev = devid;
+	uint32_t status = readl(dev->base + ISR_OFFSET);
+
+	if ((status & ~ISR_RESERVED_MASK) == 0)
+		return IRQ_NONE;
+
+	/* Must flush the TX FIFO when NAK detected */
+	if (status & ISR_NOACK_MASK)
+		writel(TXFCR_FIFO_FLUSH_MASK | TXFCR_FIFO_EN_MASK,
+		       dev->base + TXFCR_OFFSET);
+
+	writel(status & ~ISR_RESERVED_MASK, dev->base + ISR_OFFSET);
+	complete_all(&dev->done);
+
+	return IRQ_HANDLED;
+}
+
+/* Wait for ISR_CMDBUSY_MASK to go low before writing to CS, DAT, or RCD */
+static int bcm_kona_i2c_wait_if_busy(struct bcm_kona_i2c_dev *dev)
+{
+	unsigned long timeout = jiffies + msecs_to_jiffies(I2C_TIMEOUT);
+
+	while (readl(dev->base + ISR_OFFSET) & ISR_CMDBUSY_MASK)
+		if (time_after(jiffies, timeout)) {
+			dev_err(dev->device, "CMDBUSY timeout\n");
+			return -ETIMEDOUT;
+		}
+
+	return 0;
+}
+
+/* Send command to I2C bus */
+static int bcm_kona_send_i2c_cmd(struct bcm_kona_i2c_dev *dev,
+				 enum bcm_kona_cmd_t cmd)
+{
+	int rc;
+	unsigned long time_left = msecs_to_jiffies(I2C_TIMEOUT);
+
+	/* Make sure the hardware is ready */
+	rc = bcm_kona_i2c_wait_if_busy(dev);
+	if (rc < 0)
+		return rc;
+
+	/* Unmask the session done interrupt */
+	writel(IER_I2C_INT_EN_MASK, dev->base + IER_OFFSET);
+
+	/* Mark as incomplete before sending the command */
+	reinit_completion(&dev->done);
+
+	/* Send the command */
+	bcm_kona_i2c_send_cmd_to_ctrl(dev, cmd);
+
+	/* Wait for transaction to finish or timeout */
+	time_left = wait_for_completion_timeout(&dev->done, time_left);
+
+	/* Mask all interrupts */
+	writel(0, dev->base + IER_OFFSET);
+
+	if (!time_left) {
+		dev_err(dev->device, "controller timed out\n");
+		rc = -ETIMEDOUT;
+	}
+
+	/* Clear command */
+	bcm_kona_i2c_send_cmd_to_ctrl(dev, BCM_CMD_NOACTION);
+
+	return rc;
+}
+
+/* Read a single RX FIFO worth of data from the i2c bus */
+static int bcm_kona_i2c_read_fifo_single(struct bcm_kona_i2c_dev *dev,
+					 uint8_t *buf, unsigned int len,
+					 unsigned int last_byte_nak)
+{
+	unsigned long time_left = msecs_to_jiffies(I2C_TIMEOUT);
+
+	/* Mark as incomplete before starting the RX FIFO */
+	reinit_completion(&dev->done);
+
+	/* Unmask the read complete interrupt */
+	writel(IER_READ_COMPLETE_INT_MASK, dev->base + IER_OFFSET);
+
+	/* Start the RX FIFO */
+	writel((last_byte_nak << RXFCR_NACK_EN_SHIFT) |
+	       (len << RXFCR_READ_COUNT_SHIFT),
+		dev->base + RXFCR_OFFSET);
+
+	/* Wait for FIFO read to complete */
+	time_left = wait_for_completion_timeout(&dev->done, time_left);
+
+	/* Mask all interrupts */
+	writel(0, dev->base + IER_OFFSET);
+
+	if (!time_left) {
+		dev_err(dev->device, "RX FIFO time out\n");
+		return -EREMOTEIO;
+	}
+
+	/* Read data from FIFO */
+	for (; len > 0; len--, buf++)
+		*buf = readl(dev->base + RXFIFORDOUT_OFFSET);
+
+	return 0;
+}
+
+/* Read any amount of data using the RX FIFO from the i2c bus */
+static int bcm_kona_i2c_read_fifo(struct bcm_kona_i2c_dev *dev,
+				  struct i2c_msg *msg)
+{
+	unsigned int bytes_to_read = MAX_RX_FIFO_SIZE;
+	unsigned int last_byte_nak = 0;
+	unsigned int bytes_read = 0;
+	int rc;
+
+	uint8_t *tmp_buf = msg->buf;
+
+	while (bytes_read < msg->len) {
+		if (msg->len - bytes_read <= MAX_RX_FIFO_SIZE) {
+			last_byte_nak = 1; /* NAK last byte of transfer */
+			bytes_to_read = msg->len - bytes_read;
+		}
+
+		rc = bcm_kona_i2c_read_fifo_single(dev, tmp_buf, bytes_to_read,
+						   last_byte_nak);
+		if (rc < 0)
+			return -EREMOTEIO;
+
+		bytes_read += bytes_to_read;
+		tmp_buf += bytes_to_read;
+	}
+
+	return 0;
+}
+
+/* Write a single byte of data to the i2c bus */
+static int bcm_kona_i2c_write_byte(struct bcm_kona_i2c_dev *dev, uint8_t data,
+				   unsigned int nak_expected)
+{
+	int rc;
+	unsigned long time_left = msecs_to_jiffies(I2C_TIMEOUT);
+	unsigned int nak_received;
+
+	/* Make sure the hardware is ready */
+	rc = bcm_kona_i2c_wait_if_busy(dev);
+	if (rc < 0)
+		return rc;
+
+	/* Clear pending session done interrupt */
+	writel(ISR_SES_DONE_MASK, dev->base + ISR_OFFSET);
+
+	/* Unmask the session done interrupt */
+	writel(IER_I2C_INT_EN_MASK, dev->base + IER_OFFSET);
+
+	/* Mark as incomplete before sending the data */
+	reinit_completion(&dev->done);
+
+	/* Send one byte of data */
+	writel(data, dev->base + DAT_OFFSET);
+
+	/* Wait for byte to be written */
+	time_left = wait_for_completion_timeout(&dev->done, time_left);
+
+	/* Mask all interrupts */
+	writel(0, dev->base + IER_OFFSET);
+
+	if (!time_left) {
+		dev_dbg(dev->device, "controller timed out\n");
+		return -ETIMEDOUT;
+	}
+
+	nak_received = readl(dev->base + CS_OFFSET) & CS_ACK_MASK ? 1 : 0;
+
+	if (nak_received ^ nak_expected) {
+		dev_dbg(dev->device, "unexpected NAK/ACK\n");
+		return -EREMOTEIO;
+	}
+
+	return 0;
+}
+
+/* Write a single TX FIFO worth of data to the i2c bus */
+static int bcm_kona_i2c_write_fifo_single(struct bcm_kona_i2c_dev *dev,
+					  uint8_t *buf, unsigned int len)
+{
+	int k;
+	unsigned long time_left = msecs_to_jiffies(I2C_TIMEOUT);
+	unsigned int fifo_status;
+
+	/* Mark as incomplete before sending data to the TX FIFO */
+	reinit_completion(&dev->done);
+
+	/* Unmask the fifo empty and nak interrupt */
+	writel(IER_FIFO_INT_EN_MASK | IER_NOACK_EN_MASK,
+	       dev->base + IER_OFFSET);
+
+	/* Disable IRQ to load a FIFO worth of data without interruption */
+	disable_irq(dev->irq);
+
+	/* Write data into FIFO */
+	for (k = 0; k < len; k++)
+		writel(buf[k], (dev->base + DAT_OFFSET));
+
+	/* Enable IRQ now that data has been loaded */
+	enable_irq(dev->irq);
+
+	/* Wait for FIFO to empty */
+	do {
+		time_left = wait_for_completion_timeout(&dev->done, time_left);
+		fifo_status = readl(dev->base + FIFO_STATUS_OFFSET);
+	} while (time_left && !(fifo_status & FIFO_STATUS_TXFIFO_EMPTY_MASK));
+
+	/* Mask all interrupts */
+	writel(0, dev->base + IER_OFFSET);
+
+	/* Check if there was a NAK */
+	if (readl(dev->base + CS_OFFSET) & CS_ACK_MASK) {
+		dev_err(dev->device, "unexpected NAK\n");
+		return -EREMOTEIO;
+	}
+
+	/* Check if a timeout occured */
+	if (!time_left) {
+		dev_err(dev->device, "completion timed out\n");
+		return -EREMOTEIO;
+	}
+
+	return 0;
+}
+
+
+/* Write any amount of data using TX FIFO to the i2c bus */
+static int bcm_kona_i2c_write_fifo(struct bcm_kona_i2c_dev *dev,
+				   struct i2c_msg *msg)
+{
+	unsigned int bytes_to_write = MAX_TX_FIFO_SIZE;
+	unsigned int bytes_written = 0;
+	int rc;
+
+	uint8_t *tmp_buf = msg->buf;
+
+	while (bytes_written < msg->len) {
+		if (msg->len - bytes_written <= MAX_TX_FIFO_SIZE)
+			bytes_to_write = msg->len - bytes_written;
+
+		rc = bcm_kona_i2c_write_fifo_single(dev, tmp_buf,
+						    bytes_to_write);
+		if (rc < 0)
+			return -EREMOTEIO;
+
+		bytes_written += bytes_to_write;
+		tmp_buf += bytes_to_write;
+	}
+
+	return 0;
+}
+
+/* Send i2c address */
+static int bcm_kona_i2c_do_addr(struct bcm_kona_i2c_dev *dev,
+				     struct i2c_msg *msg)
+{
+	unsigned char addr;
+
+	if (msg->flags & I2C_M_TEN) {
+		/* First byte is 11110XX0 where XX is upper 2 bits */
+		addr = 0xF0 | ((msg->addr & 0x300) >> 7);
+		if (bcm_kona_i2c_write_byte(dev, addr, 0) < 0)
+			return -EREMOTEIO;
+
+		/* Second byte is the remaining 8 bits */
+		addr = msg->addr & 0xFF;
+		if (bcm_kona_i2c_write_byte(dev, addr, 0) < 0)
+			return -EREMOTEIO;
+
+		if (msg->flags & I2C_M_RD) {
+			/* For read, send restart command */
+			if (bcm_kona_send_i2c_cmd(dev, BCM_CMD_RESTART) < 0)
+				return -EREMOTEIO;
+
+			/* Then re-send the first byte with the read bit set */
+			addr = 0xF0 | ((msg->addr & 0x300) >> 7) | 0x01;
+			if (bcm_kona_i2c_write_byte(dev, addr, 0) < 0)
+				return -EREMOTEIO;
+		}
+	} else {
+		addr = msg->addr << 1;
+
+		if (msg->flags & I2C_M_RD)
+			addr |= 1;
+
+		if (bcm_kona_i2c_write_byte(dev, addr, 0) < 0)
+			return -EREMOTEIO;
+	}
+
+	return 0;
+}
+
+static void bcm_kona_i2c_enable_autosense(struct bcm_kona_i2c_dev *dev)
+{
+	writel(readl(dev->base + CLKEN_OFFSET) & ~CLKEN_AUTOSENSE_OFF_MASK,
+	       dev->base + CLKEN_OFFSET);
+}
+
+static void bcm_kona_i2c_config_timing(struct bcm_kona_i2c_dev *dev)
+{
+	writel(readl(dev->base + HSTIM_OFFSET) & ~HSTIM_HS_MODE_MASK,
+	       dev->base + HSTIM_OFFSET);
+
+	writel((dev->std_cfg->prescale << TIM_PRESCALE_SHIFT) |
+	       (dev->std_cfg->time_p << TIM_P_SHIFT) |
+	       (dev->std_cfg->no_div << TIM_NO_DIV_SHIFT) |
+	       (dev->std_cfg->time_div	<< TIM_DIV_SHIFT),
+	       dev->base + TIM_OFFSET);
+
+	writel((dev->std_cfg->time_m << CLKEN_M_SHIFT) |
+	       (dev->std_cfg->time_n << CLKEN_N_SHIFT) |
+	       CLKEN_CLKEN_MASK,
+	       dev->base + CLKEN_OFFSET);
+}
+
+static void bcm_kona_i2c_config_timing_hs(struct bcm_kona_i2c_dev *dev)
+{
+	writel((dev->hs_cfg->prescale << TIM_PRESCALE_SHIFT) |
+	       (dev->hs_cfg->time_p << TIM_P_SHIFT) |
+	       (dev->hs_cfg->no_div << TIM_NO_DIV_SHIFT) |
+	       (dev->hs_cfg->time_div << TIM_DIV_SHIFT),
+	       dev->base + TIM_OFFSET);
+
+	writel((dev->hs_cfg->hs_hold << HSTIM_HS_HOLD_SHIFT) |
+	       (dev->hs_cfg->hs_high_phase << HSTIM_HS_HIGH_PHASE_SHIFT) |
+	       (dev->hs_cfg->hs_setup << HSTIM_HS_SETUP_SHIFT),
+	       dev->base + HSTIM_OFFSET);
+
+	writel(readl(dev->base + HSTIM_OFFSET) | HSTIM_HS_MODE_MASK,
+	       dev->base + HSTIM_OFFSET);
+}
+
+static int bcm_kona_i2c_switch_to_hs(struct bcm_kona_i2c_dev *dev)
+{
+	int rc;
+
+	/* Send mastercode at standard speed */
+	rc = bcm_kona_i2c_write_byte(dev, MASTERCODE, 1);
+	if (rc < 0) {
+		pr_err("High speed handshake failed\n");
+		return rc;
+	}
+
+	/* Configure external clock to higher frequency */
+	rc = clk_set_rate(dev->external_clk, HS_EXT_CLK_FREQ);
+	if (rc) {
+		dev_err(dev->device, "%s: clk_set_rate returned %d\n",
+			__func__, rc);
+		return rc;
+	}
+
+	/* Reconfigure internal dividers */
+	bcm_kona_i2c_config_timing_hs(dev);
+
+	/* Send a restart command */
+	rc = bcm_kona_send_i2c_cmd(dev, BCM_CMD_RESTART);
+	if (rc < 0)
+		dev_err(dev->device, "High speed restart command failed\n");
+
+	return rc;
+}
+
+static int bcm_kona_i2c_switch_to_std(struct bcm_kona_i2c_dev *dev)
+{
+	int rc;
+
+	/* Reconfigure internal dividers */
+	bcm_kona_i2c_config_timing(dev);
+
+	/* Configure external clock to lower frequency */
+	rc = clk_set_rate(dev->external_clk, STD_EXT_CLK_FREQ);
+	if (rc) {
+		dev_err(dev->device, "%s: clk_set_rate returned %d\n",
+			__func__, rc);
+	}
+
+	return rc;
+}
+
+/* Master transfer function */
+static int bcm_kona_i2c_xfer(struct i2c_adapter *adapter,
+			     struct i2c_msg msgs[], int num)
+{
+	struct bcm_kona_i2c_dev *dev = i2c_get_adapdata(adapter);
+	struct i2c_msg *pmsg;
+	int rc = 0;
+	int i;
+
+	rc = clk_prepare_enable(dev->external_clk);
+	if (rc) {
+		dev_err(dev->device, "%s: peri clock enable failed. err %d\n",
+			__func__, rc);
+		return rc;
+	}
+
+	/* Enable pad output */
+	writel(0, dev->base + PADCTL_OFFSET);
+
+	/* Enable internal clocks */
+	bcm_kona_i2c_enable_clock(dev);
+
+	/* Send start command */
+	rc = bcm_kona_send_i2c_cmd(dev, BCM_CMD_START);
+	if (rc < 0) {
+		dev_err(dev->device, "Start command failed rc = %d\n", rc);
+		goto xfer_disable_pad;
+	}
+
+	/* Switch to high speed if applicable */
+	if (dev->hs_cfg) {
+		rc = bcm_kona_i2c_switch_to_hs(dev);
+		if (rc < 0)
+			goto xfer_send_stop;
+	}
+
+	/* Loop through all messages */
+	for (i = 0; i < num; i++) {
+		pmsg = &msgs[i];
+
+		/* Send restart for subsequent messages */
+		if ((i != 0) && ((pmsg->flags & I2C_M_NOSTART) == 0)) {
+			rc = bcm_kona_send_i2c_cmd(dev, BCM_CMD_RESTART);
+			if (rc < 0) {
+				dev_err(dev->device,
+					"restart cmd failed rc = %d\n", rc);
+					goto xfer_send_stop;
+			}
+		}
+
+		/* Send slave address */
+		if (!(pmsg->flags & I2C_M_NOSTART)) {
+			rc = bcm_kona_i2c_do_addr(dev, pmsg);
+			if (rc < 0) {
+				dev_err(dev->device,
+					"NAK from addr %2.2x msg#%d rc = %d\n",
+					pmsg->addr, i, rc);
+				goto xfer_send_stop;
+			}
+		}
+
+		/* Perform data transfer */
+		if (pmsg->flags & I2C_M_RD) {
+			rc = bcm_kona_i2c_read_fifo(dev, pmsg);
+			if (rc < 0) {
+				dev_err(dev->device, "read failure\n");
+				goto xfer_send_stop;
+			}
+		} else {
+			rc = bcm_kona_i2c_write_fifo(dev, pmsg);
+			if (rc < 0) {
+				dev_err(dev->device, "write failure");
+				goto xfer_send_stop;
+			}
+		}
+	}
+
+	rc = num;
+
+xfer_send_stop:
+	/* Send a STOP command */
+	bcm_kona_send_i2c_cmd(dev, BCM_CMD_STOP);
+
+	/* Return from high speed if applicable */
+	if (dev->hs_cfg) {
+		int hs_rc = bcm_kona_i2c_switch_to_std(dev);
+
+		if (hs_rc)
+			rc = hs_rc;
+	}
+
+xfer_disable_pad:
+	/* Disable pad output */
+	writel(PADCTL_PAD_OUT_EN_MASK, dev->base + PADCTL_OFFSET);
+
+	/* Stop internal clock */
+	bcm_kona_i2c_disable_clock(dev);
+
+	clk_disable_unprepare(dev->external_clk);
+
+	return rc;
+}
+
+static uint32_t bcm_kona_i2c_functionality(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_10BIT_ADDR |
+	    I2C_FUNC_NOSTART;
+}
+
+static const struct i2c_algorithm bcm_algo = {
+	.master_xfer = bcm_kona_i2c_xfer,
+	.functionality = bcm_kona_i2c_functionality,
+};
+
+static int bcm_kona_i2c_assign_bus_speed(struct bcm_kona_i2c_dev *dev)
+{
+	unsigned int bus_speed;
+	int ret = of_property_read_u32(dev->device->of_node, "clock-frequency",
+				       &bus_speed);
+	if (ret < 0) {
+		dev_err(dev->device, "missing clock-frequency property\n");
+		return -ENODEV;
+	}
+
+	switch (bus_speed) {
+	case 100000:
+		dev->std_cfg = &std_cfg_table[BCM_SPD_100K];
+		break;
+	case 400000:
+		dev->std_cfg = &std_cfg_table[BCM_SPD_400K];
+		break;
+	case 1000000:
+		dev->std_cfg = &std_cfg_table[BCM_SPD_1MHZ];
+		break;
+	case 3400000:
+		/* Send mastercode at 100k */
+		dev->std_cfg = &std_cfg_table[BCM_SPD_100K];
+		dev->hs_cfg = &hs_cfg_table[BCM_SPD_3P4MHZ];
+		break;
+	default:
+		pr_err("%d hz bus speed not supported\n", bus_speed);
+		pr_err("Valid speeds are 100khz, 400khz, 1mhz, and 3.4mhz\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int bcm_kona_i2c_probe(struct platform_device *pdev)
+{
+	int rc = 0;
+	struct bcm_kona_i2c_dev *dev;
+	struct i2c_adapter *adap;
+	struct resource *iomem;
+
+	/* Allocate memory for private data structure */
+	dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
+	if (!dev)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, dev);
+	dev->device = &pdev->dev;
+	init_completion(&dev->done);
+
+	/* Map hardware registers */
+	iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	dev->base = devm_ioremap_resource(dev->device, iomem);
+	if (IS_ERR(dev->base))
+		return -ENOMEM;
+
+	/* Get and enable external clock */
+	dev->external_clk = devm_clk_get(dev->device, NULL);
+	if (IS_ERR(dev->external_clk)) {
+		dev_err(dev->device, "couldn't get clock\n");
+		return -ENODEV;
+	}
+
+	rc = clk_set_rate(dev->external_clk, STD_EXT_CLK_FREQ);
+	if (rc) {
+		dev_err(dev->device, "%s: clk_set_rate returned %d\n",
+			__func__, rc);
+		return rc;
+	}
+
+	rc = clk_prepare_enable(dev->external_clk);
+	if (rc) {
+		dev_err(dev->device, "couldn't enable clock\n");
+		return rc;
+	}
+
+	/* Parse bus speed */
+	rc = bcm_kona_i2c_assign_bus_speed(dev);
+	if (rc)
+		goto probe_disable_clk;
+
+	/* Enable internal clocks */
+	bcm_kona_i2c_enable_clock(dev);
+
+	/* Configure internal dividers */
+	bcm_kona_i2c_config_timing(dev);
+
+	/* Disable timeout */
+	writel(0, dev->base + TOUT_OFFSET);
+
+	/* Enable autosense */
+	bcm_kona_i2c_enable_autosense(dev);
+
+	/* Enable TX FIFO */
+	writel(TXFCR_FIFO_FLUSH_MASK | TXFCR_FIFO_EN_MASK,
+	       dev->base + TXFCR_OFFSET);
+
+	/* Mask all interrupts */
+	writel(0, dev->base + IER_OFFSET);
+
+	/* Clear all pending interrupts */
+	writel(ISR_CMDBUSY_MASK |
+	       ISR_READ_COMPLETE_MASK |
+	       ISR_SES_DONE_MASK |
+	       ISR_ERR_MASK |
+	       ISR_TXFIFOEMPTY_MASK |
+	       ISR_NOACK_MASK,
+	       dev->base + ISR_OFFSET);
+
+	/* Get the interrupt number */
+	dev->irq = platform_get_irq(pdev, 0);
+	if (dev->irq < 0) {
+		dev_err(dev->device, "no irq resource\n");
+		rc = -ENODEV;
+		goto probe_disable_clk;
+	}
+
+	/* register the ISR handler */
+	rc = devm_request_irq(&pdev->dev, dev->irq, bcm_kona_i2c_isr,
+			      IRQF_SHARED, pdev->name, dev);
+	if (rc) {
+		dev_err(dev->device, "failed to request irq %i\n", dev->irq);
+		goto probe_disable_clk;
+	}
+
+	/* Enable the controller but leave it idle */
+	bcm_kona_i2c_send_cmd_to_ctrl(dev, BCM_CMD_NOACTION);
+
+	/* Disable pad output */
+	writel(PADCTL_PAD_OUT_EN_MASK, dev->base + PADCTL_OFFSET);
+
+	/* Disable internal clock */
+	bcm_kona_i2c_disable_clock(dev);
+
+	/* Disable external clock */
+	clk_disable_unprepare(dev->external_clk);
+
+	/* Add the i2c adapter */
+	adap = &dev->adapter;
+	i2c_set_adapdata(adap, dev);
+	adap->owner = THIS_MODULE;
+	strlcpy(adap->name, "Broadcom I2C adapter", sizeof(adap->name));
+	adap->algo = &bcm_algo;
+	adap->dev.parent = &pdev->dev;
+	adap->dev.of_node = pdev->dev.of_node;
+
+	rc = i2c_add_adapter(adap);
+	if (rc) {
+		dev_err(dev->device, "failed to add adapter\n");
+		return rc;
+	}
+
+	dev_info(dev->device, "device registered successfully\n");
+
+	return 0;
+
+probe_disable_clk:
+	bcm_kona_i2c_disable_clock(dev);
+	clk_disable_unprepare(dev->external_clk);
+
+	return rc;
+}
+
+static int bcm_kona_i2c_remove(struct platform_device *pdev)
+{
+	struct bcm_kona_i2c_dev *dev = platform_get_drvdata(pdev);
+
+	i2c_del_adapter(&dev->adapter);
+
+	return 0;
+}
+
+static const struct of_device_id bcm_kona_i2c_of_match[] = {
+	{.compatible = "brcm,kona-i2c",},
+	{},
+};
+MODULE_DEVICE_TABLE(of, bcm_kona_i2c_of_match);
+
+static struct platform_driver bcm_kona_i2c_driver = {
+	.driver = {
+		   .name = "bcm-kona-i2c",
+		   .of_match_table = bcm_kona_i2c_of_match,
+		   },
+	.probe = bcm_kona_i2c_probe,
+	.remove = bcm_kona_i2c_remove,
+};
+module_platform_driver(bcm_kona_i2c_driver);
+
+MODULE_AUTHOR("Tim Kryger <tkryger@broadcom.com>");
+MODULE_DESCRIPTION("Broadcom Kona I2C Driver");
+MODULE_LICENSE("GPL v2");