Initial import

1 files changed, 740 insertions, 0 deletions

diff --git a/drivers/i2c/busses/i2c-bfin-twi.c b/drivers/i2c/busses/i2c-bfin-twi.c
new file mode 100644
index 000000000..af162b4c7
--- /dev/null
+++ b/drivers/i2c/busses/i2c-bfin-twi.c
@@ -0,0 +1,740 @@
+/*
+ * Blackfin On-Chip Two Wire Interface Driver
+ *
+ * Copyright 2005-2007 Analog Devices Inc.
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/mm.h>
+#include <linux/timer.h>
+#include <linux/spinlock.h>
+#include <linux/completion.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/i2c/bfin_twi.h>
+
+#include <asm/irq.h>
+#include <asm/portmux.h>
+#include <asm/bfin_twi.h>
+
+/* SMBus mode*/
+#define TWI_I2C_MODE_STANDARD		1
+#define TWI_I2C_MODE_STANDARDSUB	2
+#define TWI_I2C_MODE_COMBINED		3
+#define TWI_I2C_MODE_REPEAT		4
+
+static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface,
+					unsigned short twi_int_status)
+{
+	unsigned short mast_stat = read_MASTER_STAT(iface);
+
+	if (twi_int_status & XMTSERV) {
+		if (iface->writeNum <= 0) {
+			/* start receive immediately after complete sending in
+			 * combine mode.
+			 */
+			if (iface->cur_mode == TWI_I2C_MODE_COMBINED)
+				write_MASTER_CTL(iface,
+					read_MASTER_CTL(iface) | MDIR);
+			else if (iface->manual_stop)
+				write_MASTER_CTL(iface,
+					read_MASTER_CTL(iface) | STOP);
+			else if (iface->cur_mode == TWI_I2C_MODE_REPEAT &&
+				iface->cur_msg + 1 < iface->msg_num) {
+				if (iface->pmsg[iface->cur_msg + 1].flags &
+					I2C_M_RD)
+					write_MASTER_CTL(iface,
+						read_MASTER_CTL(iface) |
+						MDIR);
+				else
+					write_MASTER_CTL(iface,
+						read_MASTER_CTL(iface) &
+						~MDIR);
+			}
+		}
+		/* Transmit next data */
+		while (iface->writeNum > 0 &&
+			(read_FIFO_STAT(iface) & XMTSTAT) != XMT_FULL) {
+			write_XMT_DATA8(iface, *(iface->transPtr++));
+			iface->writeNum--;
+		}
+	}
+	if (twi_int_status & RCVSERV) {
+		while (iface->readNum > 0 &&
+			(read_FIFO_STAT(iface) & RCVSTAT)) {
+			/* Receive next data */
+			*(iface->transPtr) = read_RCV_DATA8(iface);
+			if (iface->cur_mode == TWI_I2C_MODE_COMBINED) {
+				/* Change combine mode into sub mode after
+				 * read first data.
+				 */
+				iface->cur_mode = TWI_I2C_MODE_STANDARDSUB;
+				/* Get read number from first byte in block
+				 * combine mode.
+				 */
+				if (iface->readNum == 1 && iface->manual_stop)
+					iface->readNum = *iface->transPtr + 1;
+			}
+			iface->transPtr++;
+			iface->readNum--;
+		}
+
+		if (iface->readNum == 0) {
+			if (iface->manual_stop) {
+				/* Temporary workaround to avoid possible bus stall -
+				 * Flush FIFO before issuing the STOP condition
+				 */
+				read_RCV_DATA16(iface);
+				write_MASTER_CTL(iface,
+					read_MASTER_CTL(iface) | STOP);
+			} else if (iface->cur_mode == TWI_I2C_MODE_REPEAT &&
+					iface->cur_msg + 1 < iface->msg_num) {
+				if (iface->pmsg[iface->cur_msg + 1].flags & I2C_M_RD)
+					write_MASTER_CTL(iface,
+						read_MASTER_CTL(iface) | MDIR);
+				else
+					write_MASTER_CTL(iface,
+						read_MASTER_CTL(iface) & ~MDIR);
+			}
+		}
+	}
+	if (twi_int_status & MERR) {
+		write_INT_MASK(iface, 0);
+		write_MASTER_STAT(iface, 0x3e);
+		write_MASTER_CTL(iface, 0);
+		iface->result = -EIO;
+
+		if (mast_stat & LOSTARB)
+			dev_dbg(&iface->adap.dev, "Lost Arbitration\n");
+		if (mast_stat & ANAK)
+			dev_dbg(&iface->adap.dev, "Address Not Acknowledged\n");
+		if (mast_stat & DNAK)
+			dev_dbg(&iface->adap.dev, "Data Not Acknowledged\n");
+		if (mast_stat & BUFRDERR)
+			dev_dbg(&iface->adap.dev, "Buffer Read Error\n");
+		if (mast_stat & BUFWRERR)
+			dev_dbg(&iface->adap.dev, "Buffer Write Error\n");
+
+		/* Faulty slave devices, may drive SDA low after a transfer
+		 * finishes. To release the bus this code generates up to 9
+		 * extra clocks until SDA is released.
+		 */
+
+		if (read_MASTER_STAT(iface) & SDASEN) {
+			int cnt = 9;
+			do {
+				write_MASTER_CTL(iface, SCLOVR);
+				udelay(6);
+				write_MASTER_CTL(iface, 0);
+				udelay(6);
+			} while ((read_MASTER_STAT(iface) & SDASEN) && cnt--);
+
+			write_MASTER_CTL(iface, SDAOVR | SCLOVR);
+			udelay(6);
+			write_MASTER_CTL(iface, SDAOVR);
+			udelay(6);
+			write_MASTER_CTL(iface, 0);
+		}
+
+		/* If it is a quick transfer, only address without data,
+		 * not an err, return 1.
+		 */
+		if (iface->cur_mode == TWI_I2C_MODE_STANDARD &&
+			iface->transPtr == NULL &&
+			(twi_int_status & MCOMP) && (mast_stat & DNAK))
+			iface->result = 1;
+
+		complete(&iface->complete);
+		return;
+	}
+	if (twi_int_status & MCOMP) {
+		if (twi_int_status & (XMTSERV | RCVSERV) &&
+			(read_MASTER_CTL(iface) & MEN) == 0 &&
+			(iface->cur_mode == TWI_I2C_MODE_REPEAT ||
+			iface->cur_mode == TWI_I2C_MODE_COMBINED)) {
+			iface->result = -1;
+			write_INT_MASK(iface, 0);
+			write_MASTER_CTL(iface, 0);
+		} else if (iface->cur_mode == TWI_I2C_MODE_COMBINED) {
+			if (iface->readNum == 0) {
+				/* set the read number to 1 and ask for manual
+				 * stop in block combine mode
+				 */
+				iface->readNum = 1;
+				iface->manual_stop = 1;
+				write_MASTER_CTL(iface,
+					read_MASTER_CTL(iface) | (0xff << 6));
+			} else {
+				/* set the readd number in other
+				 * combine mode.
+				 */
+				write_MASTER_CTL(iface,
+					(read_MASTER_CTL(iface) &
+					(~(0xff << 6))) |
+					(iface->readNum << 6));
+			}
+			/* remove restart bit and enable master receive */
+			write_MASTER_CTL(iface,
+				read_MASTER_CTL(iface) & ~RSTART);
+		} else if (iface->cur_mode == TWI_I2C_MODE_REPEAT &&
+				iface->cur_msg + 1 < iface->msg_num) {
+			iface->cur_msg++;
+			iface->transPtr = iface->pmsg[iface->cur_msg].buf;
+			iface->writeNum = iface->readNum =
+				iface->pmsg[iface->cur_msg].len;
+			/* Set Transmit device address */
+			write_MASTER_ADDR(iface,
+				iface->pmsg[iface->cur_msg].addr);
+			if (iface->pmsg[iface->cur_msg].flags & I2C_M_RD)
+				iface->read_write = I2C_SMBUS_READ;
+			else {
+				iface->read_write = I2C_SMBUS_WRITE;
+				/* Transmit first data */
+				if (iface->writeNum > 0) {
+					write_XMT_DATA8(iface,
+						*(iface->transPtr++));
+					iface->writeNum--;
+				}
+			}
+
+			if (iface->pmsg[iface->cur_msg].len <= 255) {
+				write_MASTER_CTL(iface,
+					(read_MASTER_CTL(iface) &
+					(~(0xff << 6))) |
+					(iface->pmsg[iface->cur_msg].len << 6));
+				iface->manual_stop = 0;
+			} else {
+				write_MASTER_CTL(iface,
+					(read_MASTER_CTL(iface) |
+					(0xff << 6)));
+				iface->manual_stop = 1;
+			}
+			/* remove restart bit before last message */
+			if (iface->cur_msg + 1 == iface->msg_num)
+				write_MASTER_CTL(iface,
+					read_MASTER_CTL(iface) & ~RSTART);
+		} else {
+			iface->result = 1;
+			write_INT_MASK(iface, 0);
+			write_MASTER_CTL(iface, 0);
+		}
+		complete(&iface->complete);
+	}
+}
+
+/* Interrupt handler */
+static irqreturn_t bfin_twi_interrupt_entry(int irq, void *dev_id)
+{
+	struct bfin_twi_iface *iface = dev_id;
+	unsigned long flags;
+	unsigned short twi_int_status;
+
+	spin_lock_irqsave(&iface->lock, flags);
+	while (1) {
+		twi_int_status = read_INT_STAT(iface);
+		if (!twi_int_status)
+			break;
+		/* Clear interrupt status */
+		write_INT_STAT(iface, twi_int_status);
+		bfin_twi_handle_interrupt(iface, twi_int_status);
+	}
+	spin_unlock_irqrestore(&iface->lock, flags);
+	return IRQ_HANDLED;
+}
+
+/*
+ * One i2c master transfer
+ */
+static int bfin_twi_do_master_xfer(struct i2c_adapter *adap,
+				struct i2c_msg *msgs, int num)
+{
+	struct bfin_twi_iface *iface = adap->algo_data;
+	struct i2c_msg *pmsg;
+	int rc = 0;
+
+	if (!(read_CONTROL(iface) & TWI_ENA))
+		return -ENXIO;
+
+	if (read_MASTER_STAT(iface) & BUSBUSY)
+		return -EAGAIN;
+
+	iface->pmsg = msgs;
+	iface->msg_num = num;
+	iface->cur_msg = 0;
+
+	pmsg = &msgs[0];
+	if (pmsg->flags & I2C_M_TEN) {
+		dev_err(&adap->dev, "10 bits addr not supported!\n");
+		return -EINVAL;
+	}
+
+	if (iface->msg_num > 1)
+		iface->cur_mode = TWI_I2C_MODE_REPEAT;
+	iface->manual_stop = 0;
+	iface->transPtr = pmsg->buf;
+	iface->writeNum = iface->readNum = pmsg->len;
+	iface->result = 0;
+	init_completion(&(iface->complete));
+	/* Set Transmit device address */
+	write_MASTER_ADDR(iface, pmsg->addr);
+
+	/* FIFO Initiation. Data in FIFO should be
+	 *  discarded before start a new operation.
+	 */
+	write_FIFO_CTL(iface, 0x3);
+	write_FIFO_CTL(iface, 0);
+
+	if (pmsg->flags & I2C_M_RD)
+		iface->read_write = I2C_SMBUS_READ;
+	else {
+		iface->read_write = I2C_SMBUS_WRITE;
+		/* Transmit first data */
+		if (iface->writeNum > 0) {
+			write_XMT_DATA8(iface, *(iface->transPtr++));
+			iface->writeNum--;
+		}
+	}
+
+	/* clear int stat */
+	write_INT_STAT(iface, MERR | MCOMP | XMTSERV | RCVSERV);
+
+	/* Interrupt mask . Enable XMT, RCV interrupt */
+	write_INT_MASK(iface, MCOMP | MERR | RCVSERV | XMTSERV);
+
+	if (pmsg->len <= 255)
+		write_MASTER_CTL(iface, pmsg->len << 6);
+	else {
+		write_MASTER_CTL(iface, 0xff << 6);
+		iface->manual_stop = 1;
+	}
+
+	/* Master enable */
+	write_MASTER_CTL(iface, read_MASTER_CTL(iface) | MEN |
+		(iface->msg_num > 1 ? RSTART : 0) |
+		((iface->read_write == I2C_SMBUS_READ) ? MDIR : 0) |
+		((CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ > 100) ? FAST : 0));
+
+	while (!iface->result) {
+		if (!wait_for_completion_timeout(&iface->complete,
+			adap->timeout)) {
+			iface->result = -1;
+			dev_err(&adap->dev, "master transfer timeout\n");
+		}
+	}
+
+	if (iface->result == 1)
+		rc = iface->cur_msg + 1;
+	else
+		rc = iface->result;
+
+	return rc;
+}
+
+/*
+ * Generic i2c master transfer entrypoint
+ */
+static int bfin_twi_master_xfer(struct i2c_adapter *adap,
+				struct i2c_msg *msgs, int num)
+{
+	return bfin_twi_do_master_xfer(adap, msgs, num);
+}
+
+/*
+ * One I2C SMBus transfer
+ */
+int bfin_twi_do_smbus_xfer(struct i2c_adapter *adap, u16 addr,
+			unsigned short flags, char read_write,
+			u8 command, int size, union i2c_smbus_data *data)
+{
+	struct bfin_twi_iface *iface = adap->algo_data;
+	int rc = 0;
+
+	if (!(read_CONTROL(iface) & TWI_ENA))
+		return -ENXIO;
+
+	if (read_MASTER_STAT(iface) & BUSBUSY)
+		return -EAGAIN;
+
+	iface->writeNum = 0;
+	iface->readNum = 0;
+
+	/* Prepare datas & select mode */
+	switch (size) {
+	case I2C_SMBUS_QUICK:
+		iface->transPtr = NULL;
+		iface->cur_mode = TWI_I2C_MODE_STANDARD;
+		break;
+	case I2C_SMBUS_BYTE:
+		if (data == NULL)
+			iface->transPtr = NULL;
+		else {
+			if (read_write == I2C_SMBUS_READ)
+				iface->readNum = 1;
+			else
+				iface->writeNum = 1;
+			iface->transPtr = &data->byte;
+		}
+		iface->cur_mode = TWI_I2C_MODE_STANDARD;
+		break;
+	case I2C_SMBUS_BYTE_DATA:
+		if (read_write == I2C_SMBUS_READ) {
+			iface->readNum = 1;
+			iface->cur_mode = TWI_I2C_MODE_COMBINED;
+		} else {
+			iface->writeNum = 1;
+			iface->cur_mode = TWI_I2C_MODE_STANDARDSUB;
+		}
+		iface->transPtr = &data->byte;
+		break;
+	case I2C_SMBUS_WORD_DATA:
+		if (read_write == I2C_SMBUS_READ) {
+			iface->readNum = 2;
+			iface->cur_mode = TWI_I2C_MODE_COMBINED;
+		} else {
+			iface->writeNum = 2;
+			iface->cur_mode = TWI_I2C_MODE_STANDARDSUB;
+		}
+		iface->transPtr = (u8 *)&data->word;
+		break;
+	case I2C_SMBUS_PROC_CALL:
+		iface->writeNum = 2;
+		iface->readNum = 2;
+		iface->cur_mode = TWI_I2C_MODE_COMBINED;
+		iface->transPtr = (u8 *)&data->word;
+		break;
+	case I2C_SMBUS_BLOCK_DATA:
+		if (read_write == I2C_SMBUS_READ) {
+			iface->readNum = 0;
+			iface->cur_mode = TWI_I2C_MODE_COMBINED;
+		} else {
+			iface->writeNum = data->block[0] + 1;
+			iface->cur_mode = TWI_I2C_MODE_STANDARDSUB;
+		}
+		iface->transPtr = data->block;
+		break;
+	case I2C_SMBUS_I2C_BLOCK_DATA:
+		if (read_write == I2C_SMBUS_READ) {
+			iface->readNum = data->block[0];
+			iface->cur_mode = TWI_I2C_MODE_COMBINED;
+		} else {
+			iface->writeNum = data->block[0];
+			iface->cur_mode = TWI_I2C_MODE_STANDARDSUB;
+		}
+		iface->transPtr = (u8 *)&data->block[1];
+		break;
+	default:
+		return -1;
+	}
+
+	iface->result = 0;
+	iface->manual_stop = 0;
+	iface->read_write = read_write;
+	iface->command = command;
+	init_completion(&(iface->complete));
+
+	/* FIFO Initiation. Data in FIFO should be discarded before
+	 * start a new operation.
+	 */
+	write_FIFO_CTL(iface, 0x3);
+	write_FIFO_CTL(iface, 0);
+
+	/* clear int stat */
+	write_INT_STAT(iface, MERR | MCOMP | XMTSERV | RCVSERV);
+
+	/* Set Transmit device address */
+	write_MASTER_ADDR(iface, addr);
+
+	switch (iface->cur_mode) {
+	case TWI_I2C_MODE_STANDARDSUB:
+		write_XMT_DATA8(iface, iface->command);
+		write_INT_MASK(iface, MCOMP | MERR |
+			((iface->read_write == I2C_SMBUS_READ) ?
+			RCVSERV : XMTSERV));
+
+		if (iface->writeNum + 1 <= 255)
+			write_MASTER_CTL(iface, (iface->writeNum + 1) << 6);
+		else {
+			write_MASTER_CTL(iface, 0xff << 6);
+			iface->manual_stop = 1;
+		}
+		/* Master enable */
+		write_MASTER_CTL(iface, read_MASTER_CTL(iface) | MEN |
+			((CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ>100) ? FAST : 0));
+		break;
+	case TWI_I2C_MODE_COMBINED:
+		write_XMT_DATA8(iface, iface->command);
+		write_INT_MASK(iface, MCOMP | MERR | RCVSERV | XMTSERV);
+
+		if (iface->writeNum > 0)
+			write_MASTER_CTL(iface, (iface->writeNum + 1) << 6);
+		else
+			write_MASTER_CTL(iface, 0x1 << 6);
+		/* Master enable */
+		write_MASTER_CTL(iface, read_MASTER_CTL(iface) | MEN | RSTART |
+			((CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ>100) ? FAST : 0));
+		break;
+	default:
+		write_MASTER_CTL(iface, 0);
+		if (size != I2C_SMBUS_QUICK) {
+			/* Don't access xmit data register when this is a
+			 * read operation.
+			 */
+			if (iface->read_write != I2C_SMBUS_READ) {
+				if (iface->writeNum > 0) {
+					write_XMT_DATA8(iface,
+						*(iface->transPtr++));
+					if (iface->writeNum <= 255)
+						write_MASTER_CTL(iface,
+							iface->writeNum << 6);
+					else {
+						write_MASTER_CTL(iface,
+							0xff << 6);
+						iface->manual_stop = 1;
+					}
+					iface->writeNum--;
+				} else {
+					write_XMT_DATA8(iface, iface->command);
+					write_MASTER_CTL(iface, 1 << 6);
+				}
+			} else {
+				if (iface->readNum > 0 && iface->readNum <= 255)
+					write_MASTER_CTL(iface,
+						iface->readNum << 6);
+				else if (iface->readNum > 255) {
+					write_MASTER_CTL(iface, 0xff << 6);
+					iface->manual_stop = 1;
+				} else
+					break;
+			}
+		}
+		write_INT_MASK(iface, MCOMP | MERR |
+			((iface->read_write == I2C_SMBUS_READ) ?
+			RCVSERV : XMTSERV));
+
+		/* Master enable */
+		write_MASTER_CTL(iface, read_MASTER_CTL(iface) | MEN |
+			((iface->read_write == I2C_SMBUS_READ) ? MDIR : 0) |
+			((CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ > 100) ? FAST : 0));
+		break;
+	}
+
+	while (!iface->result) {
+		if (!wait_for_completion_timeout(&iface->complete,
+			adap->timeout)) {
+			iface->result = -1;
+			dev_err(&adap->dev, "smbus transfer timeout\n");
+		}
+	}
+
+	rc = (iface->result >= 0) ? 0 : -1;
+
+	return rc;
+}
+
+/*
+ * Generic I2C SMBus transfer entrypoint
+ */
+int bfin_twi_smbus_xfer(struct i2c_adapter *adap, u16 addr,
+			unsigned short flags, char read_write,
+			u8 command, int size, union i2c_smbus_data *data)
+{
+	return bfin_twi_do_smbus_xfer(adap, addr, flags,
+			read_write, command, size, data);
+}
+
+/*
+ * Return what the adapter supports
+ */
+static u32 bfin_twi_functionality(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+	       I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+	       I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_PROC_CALL |
+	       I2C_FUNC_I2C | I2C_FUNC_SMBUS_I2C_BLOCK;
+}
+
+static struct i2c_algorithm bfin_twi_algorithm = {
+	.master_xfer   = bfin_twi_master_xfer,
+	.smbus_xfer    = bfin_twi_smbus_xfer,
+	.functionality = bfin_twi_functionality,
+};
+
+#ifdef CONFIG_PM_SLEEP
+static int i2c_bfin_twi_suspend(struct device *dev)
+{
+	struct bfin_twi_iface *iface = dev_get_drvdata(dev);
+
+	iface->saved_clkdiv = read_CLKDIV(iface);
+	iface->saved_control = read_CONTROL(iface);
+
+	free_irq(iface->irq, iface);
+
+	/* Disable TWI */
+	write_CONTROL(iface, iface->saved_control & ~TWI_ENA);
+
+	return 0;
+}
+
+static int i2c_bfin_twi_resume(struct device *dev)
+{
+	struct bfin_twi_iface *iface = dev_get_drvdata(dev);
+
+	int rc = request_irq(iface->irq, bfin_twi_interrupt_entry,
+		0, to_platform_device(dev)->name, iface);
+	if (rc) {
+		dev_err(dev, "Can't get IRQ %d !\n", iface->irq);
+		return -ENODEV;
+	}
+
+	/* Resume TWI interface clock as specified */
+	write_CLKDIV(iface, iface->saved_clkdiv);
+
+	/* Resume TWI */
+	write_CONTROL(iface, iface->saved_control);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(i2c_bfin_twi_pm,
+			 i2c_bfin_twi_suspend, i2c_bfin_twi_resume);
+#define I2C_BFIN_TWI_PM_OPS	(&i2c_bfin_twi_pm)
+#else
+#define I2C_BFIN_TWI_PM_OPS	NULL
+#endif
+
+static int i2c_bfin_twi_probe(struct platform_device *pdev)
+{
+	struct bfin_twi_iface *iface;
+	struct i2c_adapter *p_adap;
+	struct resource *res;
+	int rc;
+	unsigned int clkhilow;
+
+	iface = devm_kzalloc(&pdev->dev, sizeof(struct bfin_twi_iface),
+			GFP_KERNEL);
+	if (!iface) {
+		dev_err(&pdev->dev, "Cannot allocate memory\n");
+		return -ENOMEM;
+	}
+
+	spin_lock_init(&(iface->lock));
+
+	/* Find and map our resources */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	iface->regs_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(iface->regs_base)) {
+		dev_err(&pdev->dev, "Cannot map IO\n");
+		return PTR_ERR(iface->regs_base);
+	}
+
+	iface->irq = platform_get_irq(pdev, 0);
+	if (iface->irq < 0) {
+		dev_err(&pdev->dev, "No IRQ specified\n");
+		return -ENOENT;
+	}
+
+	p_adap = &iface->adap;
+	p_adap->nr = pdev->id;
+	strlcpy(p_adap->name, pdev->name, sizeof(p_adap->name));
+	p_adap->algo = &bfin_twi_algorithm;
+	p_adap->algo_data = iface;
+	p_adap->class = I2C_CLASS_DEPRECATED;
+	p_adap->dev.parent = &pdev->dev;
+	p_adap->timeout = 5 * HZ;
+	p_adap->retries = 3;
+
+	rc = peripheral_request_list(
+			dev_get_platdata(&pdev->dev),
+			"i2c-bfin-twi");
+	if (rc) {
+		dev_err(&pdev->dev, "Can't setup pin mux!\n");
+		return -EBUSY;
+	}
+
+	rc = devm_request_irq(&pdev->dev, iface->irq, bfin_twi_interrupt_entry,
+		0, pdev->name, iface);
+	if (rc) {
+		dev_err(&pdev->dev, "Can't get IRQ %d !\n", iface->irq);
+		rc = -ENODEV;
+		goto out_error;
+	}
+
+	/* Set TWI internal clock as 10MHz */
+	write_CONTROL(iface, ((get_sclk() / 1000 / 1000 + 5) / 10) & 0x7F);
+
+	/*
+	 * We will not end up with a CLKDIV=0 because no one will specify
+	 * 20kHz SCL or less in Kconfig now. (5 * 1000 / 20 = 250)
+	 */
+	clkhilow = ((10 * 1000 / CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ) + 1) / 2;
+
+	/* Set Twi interface clock as specified */
+	write_CLKDIV(iface, (clkhilow << 8) | clkhilow);
+
+	/* Enable TWI */
+	write_CONTROL(iface, read_CONTROL(iface) | TWI_ENA);
+
+	rc = i2c_add_numbered_adapter(p_adap);
+	if (rc < 0) {
+		dev_err(&pdev->dev, "Can't add i2c adapter!\n");
+		goto out_error;
+	}
+
+	platform_set_drvdata(pdev, iface);
+
+	dev_info(&pdev->dev, "Blackfin BF5xx on-chip I2C TWI Contoller, "
+		"regs_base@%p\n", iface->regs_base);
+
+	return 0;
+
+out_error:
+	peripheral_free_list(dev_get_platdata(&pdev->dev));
+	return rc;
+}
+
+static int i2c_bfin_twi_remove(struct platform_device *pdev)
+{
+	struct bfin_twi_iface *iface = platform_get_drvdata(pdev);
+
+	i2c_del_adapter(&(iface->adap));
+	peripheral_free_list(dev_get_platdata(&pdev->dev));
+
+	return 0;
+}
+
+static struct platform_driver i2c_bfin_twi_driver = {
+	.probe		= i2c_bfin_twi_probe,
+	.remove		= i2c_bfin_twi_remove,
+	.driver		= {
+		.name	= "i2c-bfin-twi",
+		.pm	= I2C_BFIN_TWI_PM_OPS,
+	},
+};
+
+static int __init i2c_bfin_twi_init(void)
+{
+	return platform_driver_register(&i2c_bfin_twi_driver);
+}
+
+static void __exit i2c_bfin_twi_exit(void)
+{
+	platform_driver_unregister(&i2c_bfin_twi_driver);
+}
+
+subsys_initcall(i2c_bfin_twi_init);
+module_exit(i2c_bfin_twi_exit);
+
+MODULE_AUTHOR("Bryan Wu, Sonic Zhang");
+MODULE_DESCRIPTION("Blackfin BF5xx on-chip I2C TWI Contoller Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:i2c-bfin-twi");