Initial import

1 files changed, 779 insertions, 0 deletions

diff --git a/drivers/iio/adc/exynos_adc.c b/drivers/iio/adc/exynos_adc.c
new file mode 100644
index 000000000..3a2dbb3b4
--- /dev/null
+++ b/drivers/iio/adc/exynos_adc.c
@@ -0,0 +1,779 @@
+/*
+ *  exynos_adc.c - Support for ADC in EXYNOS SoCs
+ *
+ *  8 ~ 10 channel, 10/12-bit ADC
+ *
+ *  Copyright (C) 2013 Naveen Krishna Chatradhi <ch.naveen@samsung.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/regulator/consumer.h>
+#include <linux/of_platform.h>
+#include <linux/err.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/machine.h>
+#include <linux/iio/driver.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+
+/* S3C/EXYNOS4412/5250 ADC_V1 registers definitions */
+#define ADC_V1_CON(x)		((x) + 0x00)
+#define ADC_V1_DLY(x)		((x) + 0x08)
+#define ADC_V1_DATX(x)		((x) + 0x0C)
+#define ADC_V1_INTCLR(x)	((x) + 0x18)
+#define ADC_V1_MUX(x)		((x) + 0x1c)
+
+/* S3C2410 ADC registers definitions */
+#define ADC_S3C2410_MUX(x)	((x) + 0x18)
+
+/* Future ADC_V2 registers definitions */
+#define ADC_V2_CON1(x)		((x) + 0x00)
+#define ADC_V2_CON2(x)		((x) + 0x04)
+#define ADC_V2_STAT(x)		((x) + 0x08)
+#define ADC_V2_INT_EN(x)	((x) + 0x10)
+#define ADC_V2_INT_ST(x)	((x) + 0x14)
+#define ADC_V2_VER(x)		((x) + 0x20)
+
+/* Bit definitions for ADC_V1 */
+#define ADC_V1_CON_RES		(1u << 16)
+#define ADC_V1_CON_PRSCEN	(1u << 14)
+#define ADC_V1_CON_PRSCLV(x)	(((x) & 0xFF) << 6)
+#define ADC_V1_CON_STANDBY	(1u << 2)
+
+/* Bit definitions for S3C2410 ADC */
+#define ADC_S3C2410_CON_SELMUX(x) (((x) & 7) << 3)
+#define ADC_S3C2410_DATX_MASK	0x3FF
+#define ADC_S3C2416_CON_RES_SEL	(1u << 3)
+
+/* Bit definitions for ADC_V2 */
+#define ADC_V2_CON1_SOFT_RESET	(1u << 2)
+
+#define ADC_V2_CON2_OSEL	(1u << 10)
+#define ADC_V2_CON2_ESEL	(1u << 9)
+#define ADC_V2_CON2_HIGHF	(1u << 8)
+#define ADC_V2_CON2_C_TIME(x)	(((x) & 7) << 4)
+#define ADC_V2_CON2_ACH_SEL(x)	(((x) & 0xF) << 0)
+#define ADC_V2_CON2_ACH_MASK	0xF
+
+#define MAX_ADC_V2_CHANNELS		10
+#define MAX_ADC_V1_CHANNELS		8
+#define MAX_EXYNOS3250_ADC_CHANNELS	2
+
+/* Bit definitions common for ADC_V1 and ADC_V2 */
+#define ADC_CON_EN_START	(1u << 0)
+#define ADC_CON_EN_START_MASK	(0x3 << 0)
+#define ADC_DATX_MASK		0xFFF
+
+#define EXYNOS_ADC_TIMEOUT	(msecs_to_jiffies(100))
+
+#define EXYNOS_ADCV1_PHY_OFFSET	0x0718
+#define EXYNOS_ADCV2_PHY_OFFSET	0x0720
+
+struct exynos_adc {
+	struct exynos_adc_data	*data;
+	struct device		*dev;
+	void __iomem		*regs;
+	struct regmap		*pmu_map;
+	struct clk		*clk;
+	struct clk		*sclk;
+	unsigned int		irq;
+	struct regulator	*vdd;
+
+	struct completion	completion;
+
+	u32			value;
+	unsigned int            version;
+};
+
+struct exynos_adc_data {
+	int num_channels;
+	bool needs_sclk;
+	bool needs_adc_phy;
+	int phy_offset;
+	u32 mask;
+
+	void (*init_hw)(struct exynos_adc *info);
+	void (*exit_hw)(struct exynos_adc *info);
+	void (*clear_irq)(struct exynos_adc *info);
+	void (*start_conv)(struct exynos_adc *info, unsigned long addr);
+};
+
+static void exynos_adc_unprepare_clk(struct exynos_adc *info)
+{
+	if (info->data->needs_sclk)
+		clk_unprepare(info->sclk);
+	clk_unprepare(info->clk);
+}
+
+static int exynos_adc_prepare_clk(struct exynos_adc *info)
+{
+	int ret;
+
+	ret = clk_prepare(info->clk);
+	if (ret) {
+		dev_err(info->dev, "failed preparing adc clock: %d\n", ret);
+		return ret;
+	}
+
+	if (info->data->needs_sclk) {
+		ret = clk_prepare(info->sclk);
+		if (ret) {
+			clk_unprepare(info->clk);
+			dev_err(info->dev,
+				"failed preparing sclk_adc clock: %d\n", ret);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static void exynos_adc_disable_clk(struct exynos_adc *info)
+{
+	if (info->data->needs_sclk)
+		clk_disable(info->sclk);
+	clk_disable(info->clk);
+}
+
+static int exynos_adc_enable_clk(struct exynos_adc *info)
+{
+	int ret;
+
+	ret = clk_enable(info->clk);
+	if (ret) {
+		dev_err(info->dev, "failed enabling adc clock: %d\n", ret);
+		return ret;
+	}
+
+	if (info->data->needs_sclk) {
+		ret = clk_enable(info->sclk);
+		if (ret) {
+			clk_disable(info->clk);
+			dev_err(info->dev,
+				"failed enabling sclk_adc clock: %d\n", ret);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static void exynos_adc_v1_init_hw(struct exynos_adc *info)
+{
+	u32 con1;
+
+	if (info->data->needs_adc_phy)
+		regmap_write(info->pmu_map, info->data->phy_offset, 1);
+
+	/* set default prescaler values and Enable prescaler */
+	con1 =  ADC_V1_CON_PRSCLV(49) | ADC_V1_CON_PRSCEN;
+
+	/* Enable 12-bit ADC resolution */
+	con1 |= ADC_V1_CON_RES;
+	writel(con1, ADC_V1_CON(info->regs));
+}
+
+static void exynos_adc_v1_exit_hw(struct exynos_adc *info)
+{
+	u32 con;
+
+	if (info->data->needs_adc_phy)
+		regmap_write(info->pmu_map, info->data->phy_offset, 0);
+
+	con = readl(ADC_V1_CON(info->regs));
+	con |= ADC_V1_CON_STANDBY;
+	writel(con, ADC_V1_CON(info->regs));
+}
+
+static void exynos_adc_v1_clear_irq(struct exynos_adc *info)
+{
+	writel(1, ADC_V1_INTCLR(info->regs));
+}
+
+static void exynos_adc_v1_start_conv(struct exynos_adc *info,
+				     unsigned long addr)
+{
+	u32 con1;
+
+	writel(addr, ADC_V1_MUX(info->regs));
+
+	con1 = readl(ADC_V1_CON(info->regs));
+	writel(con1 | ADC_CON_EN_START, ADC_V1_CON(info->regs));
+}
+
+static const struct exynos_adc_data exynos_adc_v1_data = {
+	.num_channels	= MAX_ADC_V1_CHANNELS,
+	.mask		= ADC_DATX_MASK,	/* 12 bit ADC resolution */
+	.needs_adc_phy	= true,
+	.phy_offset	= EXYNOS_ADCV1_PHY_OFFSET,
+
+	.init_hw	= exynos_adc_v1_init_hw,
+	.exit_hw	= exynos_adc_v1_exit_hw,
+	.clear_irq	= exynos_adc_v1_clear_irq,
+	.start_conv	= exynos_adc_v1_start_conv,
+};
+
+static void exynos_adc_s3c2416_start_conv(struct exynos_adc *info,
+					  unsigned long addr)
+{
+	u32 con1;
+
+	/* Enable 12 bit ADC resolution */
+	con1 = readl(ADC_V1_CON(info->regs));
+	con1 |= ADC_S3C2416_CON_RES_SEL;
+	writel(con1, ADC_V1_CON(info->regs));
+
+	/* Select channel for S3C2416 */
+	writel(addr, ADC_S3C2410_MUX(info->regs));
+
+	con1 = readl(ADC_V1_CON(info->regs));
+	writel(con1 | ADC_CON_EN_START, ADC_V1_CON(info->regs));
+}
+
+static struct exynos_adc_data const exynos_adc_s3c2416_data = {
+	.num_channels	= MAX_ADC_V1_CHANNELS,
+	.mask		= ADC_DATX_MASK,	/* 12 bit ADC resolution */
+
+	.init_hw	= exynos_adc_v1_init_hw,
+	.exit_hw	= exynos_adc_v1_exit_hw,
+	.start_conv	= exynos_adc_s3c2416_start_conv,
+};
+
+static void exynos_adc_s3c2443_start_conv(struct exynos_adc *info,
+					  unsigned long addr)
+{
+	u32 con1;
+
+	/* Select channel for S3C2433 */
+	writel(addr, ADC_S3C2410_MUX(info->regs));
+
+	con1 = readl(ADC_V1_CON(info->regs));
+	writel(con1 | ADC_CON_EN_START, ADC_V1_CON(info->regs));
+}
+
+static struct exynos_adc_data const exynos_adc_s3c2443_data = {
+	.num_channels	= MAX_ADC_V1_CHANNELS,
+	.mask		= ADC_S3C2410_DATX_MASK, /* 10 bit ADC resolution */
+
+	.init_hw	= exynos_adc_v1_init_hw,
+	.exit_hw	= exynos_adc_v1_exit_hw,
+	.start_conv	= exynos_adc_s3c2443_start_conv,
+};
+
+static void exynos_adc_s3c64xx_start_conv(struct exynos_adc *info,
+					  unsigned long addr)
+{
+	u32 con1;
+
+	con1 = readl(ADC_V1_CON(info->regs));
+	con1 &= ~ADC_S3C2410_CON_SELMUX(0x7);
+	con1 |= ADC_S3C2410_CON_SELMUX(addr);
+	writel(con1 | ADC_CON_EN_START, ADC_V1_CON(info->regs));
+}
+
+static struct exynos_adc_data const exynos_adc_s3c24xx_data = {
+	.num_channels	= MAX_ADC_V1_CHANNELS,
+	.mask		= ADC_S3C2410_DATX_MASK, /* 10 bit ADC resolution */
+
+	.init_hw	= exynos_adc_v1_init_hw,
+	.exit_hw	= exynos_adc_v1_exit_hw,
+	.start_conv	= exynos_adc_s3c64xx_start_conv,
+};
+
+static struct exynos_adc_data const exynos_adc_s3c64xx_data = {
+	.num_channels	= MAX_ADC_V1_CHANNELS,
+	.mask		= ADC_DATX_MASK,	/* 12 bit ADC resolution */
+
+	.init_hw	= exynos_adc_v1_init_hw,
+	.exit_hw	= exynos_adc_v1_exit_hw,
+	.clear_irq	= exynos_adc_v1_clear_irq,
+	.start_conv	= exynos_adc_s3c64xx_start_conv,
+};
+
+static void exynos_adc_v2_init_hw(struct exynos_adc *info)
+{
+	u32 con1, con2;
+
+	if (info->data->needs_adc_phy)
+		regmap_write(info->pmu_map, info->data->phy_offset, 1);
+
+	con1 = ADC_V2_CON1_SOFT_RESET;
+	writel(con1, ADC_V2_CON1(info->regs));
+
+	con2 = ADC_V2_CON2_OSEL | ADC_V2_CON2_ESEL |
+		ADC_V2_CON2_HIGHF | ADC_V2_CON2_C_TIME(0);
+	writel(con2, ADC_V2_CON2(info->regs));
+
+	/* Enable interrupts */
+	writel(1, ADC_V2_INT_EN(info->regs));
+}
+
+static void exynos_adc_v2_exit_hw(struct exynos_adc *info)
+{
+	u32 con;
+
+	if (info->data->needs_adc_phy)
+		regmap_write(info->pmu_map, info->data->phy_offset, 0);
+
+	con = readl(ADC_V2_CON1(info->regs));
+	con &= ~ADC_CON_EN_START;
+	writel(con, ADC_V2_CON1(info->regs));
+}
+
+static void exynos_adc_v2_clear_irq(struct exynos_adc *info)
+{
+	writel(1, ADC_V2_INT_ST(info->regs));
+}
+
+static void exynos_adc_v2_start_conv(struct exynos_adc *info,
+				     unsigned long addr)
+{
+	u32 con1, con2;
+
+	con2 = readl(ADC_V2_CON2(info->regs));
+	con2 &= ~ADC_V2_CON2_ACH_MASK;
+	con2 |= ADC_V2_CON2_ACH_SEL(addr);
+	writel(con2, ADC_V2_CON2(info->regs));
+
+	con1 = readl(ADC_V2_CON1(info->regs));
+	writel(con1 | ADC_CON_EN_START, ADC_V2_CON1(info->regs));
+}
+
+static const struct exynos_adc_data exynos_adc_v2_data = {
+	.num_channels	= MAX_ADC_V2_CHANNELS,
+	.mask		= ADC_DATX_MASK, /* 12 bit ADC resolution */
+	.needs_adc_phy	= true,
+	.phy_offset	= EXYNOS_ADCV2_PHY_OFFSET,
+
+	.init_hw	= exynos_adc_v2_init_hw,
+	.exit_hw	= exynos_adc_v2_exit_hw,
+	.clear_irq	= exynos_adc_v2_clear_irq,
+	.start_conv	= exynos_adc_v2_start_conv,
+};
+
+static const struct exynos_adc_data exynos3250_adc_data = {
+	.num_channels	= MAX_EXYNOS3250_ADC_CHANNELS,
+	.mask		= ADC_DATX_MASK, /* 12 bit ADC resolution */
+	.needs_sclk	= true,
+	.needs_adc_phy	= true,
+	.phy_offset	= EXYNOS_ADCV1_PHY_OFFSET,
+
+	.init_hw	= exynos_adc_v2_init_hw,
+	.exit_hw	= exynos_adc_v2_exit_hw,
+	.clear_irq	= exynos_adc_v2_clear_irq,
+	.start_conv	= exynos_adc_v2_start_conv,
+};
+
+static void exynos_adc_exynos7_init_hw(struct exynos_adc *info)
+{
+	u32 con1, con2;
+
+	if (info->data->needs_adc_phy)
+		regmap_write(info->pmu_map, info->data->phy_offset, 1);
+
+	con1 = ADC_V2_CON1_SOFT_RESET;
+	writel(con1, ADC_V2_CON1(info->regs));
+
+	con2 = readl(ADC_V2_CON2(info->regs));
+	con2 &= ~ADC_V2_CON2_C_TIME(7);
+	con2 |= ADC_V2_CON2_C_TIME(0);
+	writel(con2, ADC_V2_CON2(info->regs));
+
+	/* Enable interrupts */
+	writel(1, ADC_V2_INT_EN(info->regs));
+}
+
+static const struct exynos_adc_data exynos7_adc_data = {
+	.num_channels	= MAX_ADC_V1_CHANNELS,
+	.mask		= ADC_DATX_MASK, /* 12 bit ADC resolution */
+
+	.init_hw	= exynos_adc_exynos7_init_hw,
+	.exit_hw	= exynos_adc_v2_exit_hw,
+	.clear_irq	= exynos_adc_v2_clear_irq,
+	.start_conv	= exynos_adc_v2_start_conv,
+};
+
+static const struct of_device_id exynos_adc_match[] = {
+	{
+		.compatible = "samsung,s3c2410-adc",
+		.data = &exynos_adc_s3c24xx_data,
+	}, {
+		.compatible = "samsung,s3c2416-adc",
+		.data = &exynos_adc_s3c2416_data,
+	}, {
+		.compatible = "samsung,s3c2440-adc",
+		.data = &exynos_adc_s3c24xx_data,
+	}, {
+		.compatible = "samsung,s3c2443-adc",
+		.data = &exynos_adc_s3c2443_data,
+	}, {
+		.compatible = "samsung,s3c6410-adc",
+		.data = &exynos_adc_s3c64xx_data,
+	}, {
+		.compatible = "samsung,exynos-adc-v1",
+		.data = &exynos_adc_v1_data,
+	}, {
+		.compatible = "samsung,exynos-adc-v2",
+		.data = &exynos_adc_v2_data,
+	}, {
+		.compatible = "samsung,exynos3250-adc",
+		.data = &exynos3250_adc_data,
+	}, {
+		.compatible = "samsung,exynos7-adc",
+		.data = &exynos7_adc_data,
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, exynos_adc_match);
+
+static struct exynos_adc_data *exynos_adc_get_data(struct platform_device *pdev)
+{
+	const struct of_device_id *match;
+
+	match = of_match_node(exynos_adc_match, pdev->dev.of_node);
+	return (struct exynos_adc_data *)match->data;
+}
+
+static int exynos_read_raw(struct iio_dev *indio_dev,
+				struct iio_chan_spec const *chan,
+				int *val,
+				int *val2,
+				long mask)
+{
+	struct exynos_adc *info = iio_priv(indio_dev);
+	unsigned long timeout;
+	int ret;
+
+	if (mask != IIO_CHAN_INFO_RAW)
+		return -EINVAL;
+
+	mutex_lock(&indio_dev->mlock);
+	reinit_completion(&info->completion);
+
+	/* Select the channel to be used and Trigger conversion */
+	if (info->data->start_conv)
+		info->data->start_conv(info, chan->address);
+
+	timeout = wait_for_completion_timeout
+			(&info->completion, EXYNOS_ADC_TIMEOUT);
+	if (timeout == 0) {
+		dev_warn(&indio_dev->dev, "Conversion timed out! Resetting\n");
+		if (info->data->init_hw)
+			info->data->init_hw(info);
+		ret = -ETIMEDOUT;
+	} else {
+		*val = info->value;
+		*val2 = 0;
+		ret = IIO_VAL_INT;
+	}
+
+	mutex_unlock(&indio_dev->mlock);
+
+	return ret;
+}
+
+static irqreturn_t exynos_adc_isr(int irq, void *dev_id)
+{
+	struct exynos_adc *info = (struct exynos_adc *)dev_id;
+	u32 mask = info->data->mask;
+
+	/* Read value */
+	info->value = readl(ADC_V1_DATX(info->regs)) & mask;
+
+	/* clear irq */
+	if (info->data->clear_irq)
+		info->data->clear_irq(info);
+
+	complete(&info->completion);
+
+	return IRQ_HANDLED;
+}
+
+static int exynos_adc_reg_access(struct iio_dev *indio_dev,
+			      unsigned reg, unsigned writeval,
+			      unsigned *readval)
+{
+	struct exynos_adc *info = iio_priv(indio_dev);
+
+	if (readval == NULL)
+		return -EINVAL;
+
+	*readval = readl(info->regs + reg);
+
+	return 0;
+}
+
+static const struct iio_info exynos_adc_iio_info = {
+	.read_raw = &exynos_read_raw,
+	.debugfs_reg_access = &exynos_adc_reg_access,
+	.driver_module = THIS_MODULE,
+};
+
+#define ADC_CHANNEL(_index, _id) {			\
+	.type = IIO_VOLTAGE,				\
+	.indexed = 1,					\
+	.channel = _index,				\
+	.address = _index,				\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),	\
+	.datasheet_name = _id,				\
+}
+
+static const struct iio_chan_spec exynos_adc_iio_channels[] = {
+	ADC_CHANNEL(0, "adc0"),
+	ADC_CHANNEL(1, "adc1"),
+	ADC_CHANNEL(2, "adc2"),
+	ADC_CHANNEL(3, "adc3"),
+	ADC_CHANNEL(4, "adc4"),
+	ADC_CHANNEL(5, "adc5"),
+	ADC_CHANNEL(6, "adc6"),
+	ADC_CHANNEL(7, "adc7"),
+	ADC_CHANNEL(8, "adc8"),
+	ADC_CHANNEL(9, "adc9"),
+};
+
+static int exynos_adc_remove_devices(struct device *dev, void *c)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+
+	platform_device_unregister(pdev);
+
+	return 0;
+}
+
+static int exynos_adc_probe(struct platform_device *pdev)
+{
+	struct exynos_adc *info = NULL;
+	struct device_node *np = pdev->dev.of_node;
+	struct iio_dev *indio_dev = NULL;
+	struct resource	*mem;
+	int ret = -ENODEV;
+	int irq;
+
+	if (!np)
+		return ret;
+
+	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(struct exynos_adc));
+	if (!indio_dev) {
+		dev_err(&pdev->dev, "failed allocating iio device\n");
+		return -ENOMEM;
+	}
+
+	info = iio_priv(indio_dev);
+
+	info->data = exynos_adc_get_data(pdev);
+	if (!info->data) {
+		dev_err(&pdev->dev, "failed getting exynos_adc_data\n");
+		return -EINVAL;
+	}
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	info->regs = devm_ioremap_resource(&pdev->dev, mem);
+	if (IS_ERR(info->regs))
+		return PTR_ERR(info->regs);
+
+
+	if (info->data->needs_adc_phy) {
+		info->pmu_map = syscon_regmap_lookup_by_phandle(
+					pdev->dev.of_node,
+					"samsung,syscon-phandle");
+		if (IS_ERR(info->pmu_map)) {
+			dev_err(&pdev->dev, "syscon regmap lookup failed.\n");
+			return PTR_ERR(info->pmu_map);
+		}
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "no irq resource?\n");
+		return irq;
+	}
+
+	info->irq = irq;
+	info->dev = &pdev->dev;
+
+	init_completion(&info->completion);
+
+	info->clk = devm_clk_get(&pdev->dev, "adc");
+	if (IS_ERR(info->clk)) {
+		dev_err(&pdev->dev, "failed getting clock, err = %ld\n",
+							PTR_ERR(info->clk));
+		return PTR_ERR(info->clk);
+	}
+
+	if (info->data->needs_sclk) {
+		info->sclk = devm_clk_get(&pdev->dev, "sclk");
+		if (IS_ERR(info->sclk)) {
+			dev_err(&pdev->dev,
+				"failed getting sclk clock, err = %ld\n",
+				PTR_ERR(info->sclk));
+			return PTR_ERR(info->sclk);
+		}
+	}
+
+	info->vdd = devm_regulator_get(&pdev->dev, "vdd");
+	if (IS_ERR(info->vdd)) {
+		dev_err(&pdev->dev, "failed getting regulator, err = %ld\n",
+							PTR_ERR(info->vdd));
+		return PTR_ERR(info->vdd);
+	}
+
+	ret = regulator_enable(info->vdd);
+	if (ret)
+		return ret;
+
+	ret = exynos_adc_prepare_clk(info);
+	if (ret)
+		goto err_disable_reg;
+
+	ret = exynos_adc_enable_clk(info);
+	if (ret)
+		goto err_unprepare_clk;
+
+	platform_set_drvdata(pdev, indio_dev);
+
+	indio_dev->name = dev_name(&pdev->dev);
+	indio_dev->dev.parent = &pdev->dev;
+	indio_dev->dev.of_node = pdev->dev.of_node;
+	indio_dev->info = &exynos_adc_iio_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = exynos_adc_iio_channels;
+	indio_dev->num_channels = info->data->num_channels;
+
+	ret = request_irq(info->irq, exynos_adc_isr,
+					0, dev_name(&pdev->dev), info);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed requesting irq, irq = %d\n",
+							info->irq);
+		goto err_disable_clk;
+	}
+
+	ret = iio_device_register(indio_dev);
+	if (ret)
+		goto err_irq;
+
+	if (info->data->init_hw)
+		info->data->init_hw(info);
+
+	ret = of_platform_populate(np, exynos_adc_match, NULL, &indio_dev->dev);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed adding child nodes\n");
+		goto err_of_populate;
+	}
+
+	return 0;
+
+err_of_populate:
+	device_for_each_child(&indio_dev->dev, NULL,
+				exynos_adc_remove_devices);
+	iio_device_unregister(indio_dev);
+err_irq:
+	free_irq(info->irq, info);
+err_disable_clk:
+	if (info->data->exit_hw)
+		info->data->exit_hw(info);
+	exynos_adc_disable_clk(info);
+err_unprepare_clk:
+	exynos_adc_unprepare_clk(info);
+err_disable_reg:
+	regulator_disable(info->vdd);
+	return ret;
+}
+
+static int exynos_adc_remove(struct platform_device *pdev)
+{
+	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+	struct exynos_adc *info = iio_priv(indio_dev);
+
+	device_for_each_child(&indio_dev->dev, NULL,
+				exynos_adc_remove_devices);
+	iio_device_unregister(indio_dev);
+	free_irq(info->irq, info);
+	if (info->data->exit_hw)
+		info->data->exit_hw(info);
+	exynos_adc_disable_clk(info);
+	exynos_adc_unprepare_clk(info);
+	regulator_disable(info->vdd);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int exynos_adc_suspend(struct device *dev)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct exynos_adc *info = iio_priv(indio_dev);
+
+	if (info->data->exit_hw)
+		info->data->exit_hw(info);
+	exynos_adc_disable_clk(info);
+	regulator_disable(info->vdd);
+
+	return 0;
+}
+
+static int exynos_adc_resume(struct device *dev)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct exynos_adc *info = iio_priv(indio_dev);
+	int ret;
+
+	ret = regulator_enable(info->vdd);
+	if (ret)
+		return ret;
+
+	ret = exynos_adc_enable_clk(info);
+	if (ret)
+		return ret;
+
+	if (info->data->init_hw)
+		info->data->init_hw(info);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(exynos_adc_pm_ops,
+			exynos_adc_suspend,
+			exynos_adc_resume);
+
+static struct platform_driver exynos_adc_driver = {
+	.probe		= exynos_adc_probe,
+	.remove		= exynos_adc_remove,
+	.driver		= {
+		.name	= "exynos-adc",
+		.of_match_table = exynos_adc_match,
+		.pm	= &exynos_adc_pm_ops,
+	},
+};
+
+module_platform_driver(exynos_adc_driver);
+
+MODULE_AUTHOR("Naveen Krishna Chatradhi <ch.naveen@samsung.com>");
+MODULE_DESCRIPTION("Samsung EXYNOS5 ADC driver");
+MODULE_LICENSE("GPL v2");