Linux-libre 4.7.1-gnupck-4.7.1-gnu

12 files changed, 507 insertions, 100 deletions

diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 82c718c51..25378c588 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -242,6 +242,16 @@ config LP8788_ADC
 	  To compile this driver as a module, choose M here: the module will be
 	  called lp8788_adc.
 
+config LPC18XX_ADC
+	tristate "NXP LPC18xx ADC driver"
+	depends on ARCH_LPC18XX || COMPILE_TEST
+	depends on OF && HAS_IOMEM
+	help
+	  Say yes here to build support for NXP LPC18XX ADC.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called lpc18xx_adc.
+
 config MAX1027
 	tristate "Maxim max1027 ADC driver"
 	depends on SPI
@@ -375,11 +385,11 @@ config ROCKCHIP_SARADC
 	  module will be called rockchip_saradc.
 
 config TI_ADC081C
-	tristate "Texas Instruments ADC081C021/027"
+	tristate "Texas Instruments ADC081C/ADC101C/ADC121C family"
 	depends on I2C
 	help
-	  If you say yes here you get support for Texas Instruments ADC081C021
-	  and ADC081C027 ADC chips.
+	  If you say yes here you get support for Texas Instruments ADC081C,
+	  ADC101C and ADC121C ADC chips.
 
 	  This driver can also be built as a module. If so, the module will be
 	  called ti-adc081c.
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index 0cb79210a..38638d46f 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -25,6 +25,7 @@ obj-$(CONFIG_HI8435) += hi8435.o
 obj-$(CONFIG_IMX7D_ADC) += imx7d_adc.o
 obj-$(CONFIG_INA2XX_ADC) += ina2xx-adc.o
 obj-$(CONFIG_LP8788_ADC) += lp8788_adc.o
+obj-$(CONFIG_LPC18XX_ADC) += lpc18xx_adc.o
 obj-$(CONFIG_MAX1027) += max1027.o
 obj-$(CONFIG_MAX1363) += max1363.o
 obj-$(CONFIG_MCP320X) += mcp320x.o
diff --git a/drivers/iio/adc/ad799x.c b/drivers/iio/adc/ad799x.c
index 01d71588d..a3f5254f4 100644
--- a/drivers/iio/adc/ad799x.c
+++ b/drivers/iio/adc/ad799x.c
@@ -477,7 +477,7 @@ static int ad799x_read_event_value(struct iio_dev *indio_dev,
 	if (ret < 0)
 		return ret;
 	*val = (ret >> chan->scan_type.shift) &
-		GENMASK(chan->scan_type.realbits - 1 , 0);
+		GENMASK(chan->scan_type.realbits - 1, 0);
 
 	return IIO_VAL_INT;
 }
diff --git a/drivers/iio/adc/at91-sama5d2_adc.c b/drivers/iio/adc/at91-sama5d2_adc.c
index 2e154cb51..e10dca3ed 100644
--- a/drivers/iio/adc/at91-sama5d2_adc.c
+++ b/drivers/iio/adc/at91-sama5d2_adc.c
@@ -66,8 +66,10 @@
 #define	AT91_SAMA5D2_MR_PRESCAL(v)	((v) << AT91_SAMA5D2_MR_PRESCAL_OFFSET)
 #define	AT91_SAMA5D2_MR_PRESCAL_OFFSET	8
 #define	AT91_SAMA5D2_MR_PRESCAL_MAX	0xff
+#define AT91_SAMA5D2_MR_PRESCAL_MASK	GENMASK(15, 8)
 /* Startup Time */
 #define	AT91_SAMA5D2_MR_STARTUP(v)	((v) << 16)
+#define AT91_SAMA5D2_MR_STARTUP_MASK	GENMASK(19, 16)
 /* Analog Change */
 #define	AT91_SAMA5D2_MR_ANACH		BIT(23)
 /* Tracking Time */
@@ -92,13 +94,13 @@
 /* Last Converted Data Register */
 #define AT91_SAMA5D2_LCDR	0x20
 /* Interrupt Enable Register */
-#define AT91_SAMA5D2_IER		0x24
+#define AT91_SAMA5D2_IER	0x24
 /* Interrupt Disable Register */
-#define AT91_SAMA5D2_IDR		0x28
+#define AT91_SAMA5D2_IDR	0x28
 /* Interrupt Mask Register */
-#define AT91_SAMA5D2_IMR		0x2c
+#define AT91_SAMA5D2_IMR	0x2c
 /* Interrupt Status Register */
-#define AT91_SAMA5D2_ISR		0x30
+#define AT91_SAMA5D2_ISR	0x30
 /* Last Channel Trigger Mode Register */
 #define AT91_SAMA5D2_LCTMR	0x34
 /* Last Channel Compare Window Register */
@@ -106,17 +108,20 @@
 /* Overrun Status Register */
 #define AT91_SAMA5D2_OVER	0x3c
 /* Extended Mode Register */
-#define AT91_SAMA5D2_EMR		0x40
+#define AT91_SAMA5D2_EMR	0x40
 /* Compare Window Register */
-#define AT91_SAMA5D2_CWR		0x44
+#define AT91_SAMA5D2_CWR	0x44
 /* Channel Gain Register */
-#define AT91_SAMA5D2_CGR		0x48
+#define AT91_SAMA5D2_CGR	0x48
+
 /* Channel Offset Register */
-#define AT91_SAMA5D2_COR		0x4c
+#define AT91_SAMA5D2_COR	0x4c
+#define AT91_SAMA5D2_COR_DIFF_OFFSET	16
+
 /* Channel Data Register 0 */
 #define AT91_SAMA5D2_CDR0	0x50
 /* Analog Control Register */
-#define AT91_SAMA5D2_ACR		0x94
+#define AT91_SAMA5D2_ACR	0x94
 /* Touchscreen Mode Register */
 #define AT91_SAMA5D2_TSMR	0xb0
 /* Touchscreen X Position Register */
@@ -130,7 +135,7 @@
 /* Correction Select Register */
 #define AT91_SAMA5D2_COSR	0xd0
 /* Correction Value Register */
-#define AT91_SAMA5D2_CVR		0xd4
+#define AT91_SAMA5D2_CVR	0xd4
 /* Channel Error Correction Register */
 #define AT91_SAMA5D2_CECR	0xd8
 /* Write Protection Mode Register */
@@ -140,7 +145,7 @@
 /* Version Register */
 #define AT91_SAMA5D2_VERSION	0xfc
 
-#define AT91_AT91_SAMA5D2_CHAN(num, addr)				\
+#define AT91_SAMA5D2_CHAN_SINGLE(num, addr)				\
 	{								\
 		.type = IIO_VOLTAGE,					\
 		.channel = num,						\
@@ -156,6 +161,24 @@
 		.indexed = 1,						\
 	}
 
+#define AT91_SAMA5D2_CHAN_DIFF(num, num2, addr)				\
+	{								\
+		.type = IIO_VOLTAGE,					\
+		.differential = 1,					\
+		.channel = num,						\
+		.channel2 = num2,					\
+		.address = addr,					\
+		.scan_type = {						\
+			.sign = 's',					\
+			.realbits = 12,					\
+		},							\
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),	\
+		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),\
+		.datasheet_name = "CH"#num"-CH"#num2,			\
+		.indexed = 1,						\
+	}
+
 #define at91_adc_readl(st, reg)		readl_relaxed(st->base + reg)
 #define at91_adc_writel(st, reg, val)	writel_relaxed(val, st->base + reg)
 
@@ -185,18 +208,24 @@ struct at91_adc_state {
 };
 
 static const struct iio_chan_spec at91_adc_channels[] = {
-	AT91_AT91_SAMA5D2_CHAN(0, 0x50),
-	AT91_AT91_SAMA5D2_CHAN(1, 0x54),
-	AT91_AT91_SAMA5D2_CHAN(2, 0x58),
-	AT91_AT91_SAMA5D2_CHAN(3, 0x5c),
-	AT91_AT91_SAMA5D2_CHAN(4, 0x60),
-	AT91_AT91_SAMA5D2_CHAN(5, 0x64),
-	AT91_AT91_SAMA5D2_CHAN(6, 0x68),
-	AT91_AT91_SAMA5D2_CHAN(7, 0x6c),
-	AT91_AT91_SAMA5D2_CHAN(8, 0x70),
-	AT91_AT91_SAMA5D2_CHAN(9, 0x74),
-	AT91_AT91_SAMA5D2_CHAN(10, 0x78),
-	AT91_AT91_SAMA5D2_CHAN(11, 0x7c),
+	AT91_SAMA5D2_CHAN_SINGLE(0, 0x50),
+	AT91_SAMA5D2_CHAN_SINGLE(1, 0x54),
+	AT91_SAMA5D2_CHAN_SINGLE(2, 0x58),
+	AT91_SAMA5D2_CHAN_SINGLE(3, 0x5c),
+	AT91_SAMA5D2_CHAN_SINGLE(4, 0x60),
+	AT91_SAMA5D2_CHAN_SINGLE(5, 0x64),
+	AT91_SAMA5D2_CHAN_SINGLE(6, 0x68),
+	AT91_SAMA5D2_CHAN_SINGLE(7, 0x6c),
+	AT91_SAMA5D2_CHAN_SINGLE(8, 0x70),
+	AT91_SAMA5D2_CHAN_SINGLE(9, 0x74),
+	AT91_SAMA5D2_CHAN_SINGLE(10, 0x78),
+	AT91_SAMA5D2_CHAN_SINGLE(11, 0x7c),
+	AT91_SAMA5D2_CHAN_DIFF(0, 1, 0x50),
+	AT91_SAMA5D2_CHAN_DIFF(2, 3, 0x58),
+	AT91_SAMA5D2_CHAN_DIFF(4, 5, 0x60),
+	AT91_SAMA5D2_CHAN_DIFF(6, 7, 0x68),
+	AT91_SAMA5D2_CHAN_DIFF(8, 9, 0x70),
+	AT91_SAMA5D2_CHAN_DIFF(10, 11, 0x78),
 };
 
 static unsigned at91_adc_startup_time(unsigned startup_time_min,
@@ -226,7 +255,7 @@ static unsigned at91_adc_startup_time(unsigned startup_time_min,
 static void at91_adc_setup_samp_freq(struct at91_adc_state *st, unsigned freq)
 {
 	struct iio_dev *indio_dev = iio_priv_to_dev(st);
-	unsigned f_per, prescal, startup;
+	unsigned f_per, prescal, startup, mr;
 
 	f_per = clk_get_rate(st->per_clk);
 	prescal = (f_per / (2 * freq)) - 1;
@@ -234,10 +263,11 @@ static void at91_adc_setup_samp_freq(struct at91_adc_state *st, unsigned freq)
 	startup = at91_adc_startup_time(st->soc_info.startup_time,
 					freq / 1000);
 
-	at91_adc_writel(st, AT91_SAMA5D2_MR,
-			AT91_SAMA5D2_MR_TRANSFER(2)
-			| AT91_SAMA5D2_MR_STARTUP(startup)
-			| AT91_SAMA5D2_MR_PRESCAL(prescal));
+	mr = at91_adc_readl(st, AT91_SAMA5D2_MR);
+	mr &= ~(AT91_SAMA5D2_MR_STARTUP_MASK | AT91_SAMA5D2_MR_PRESCAL_MASK);
+	mr |= AT91_SAMA5D2_MR_STARTUP(startup);
+	mr |= AT91_SAMA5D2_MR_PRESCAL(prescal);
+	at91_adc_writel(st, AT91_SAMA5D2_MR, mr);
 
 	dev_dbg(&indio_dev->dev, "freq: %u, startup: %u, prescal: %u\n",
 		freq, startup, prescal);
@@ -278,6 +308,7 @@ static int at91_adc_read_raw(struct iio_dev *indio_dev,
 			     int *val, int *val2, long mask)
 {
 	struct at91_adc_state *st = iio_priv(indio_dev);
+	u32 cor = 0;
 	int ret;
 
 	switch (mask) {
@@ -286,6 +317,11 @@ static int at91_adc_read_raw(struct iio_dev *indio_dev,
 
 		st->chan = chan;
 
+		if (chan->differential)
+			cor = (BIT(chan->channel) | BIT(chan->channel2)) <<
+			      AT91_SAMA5D2_COR_DIFF_OFFSET;
+
+		at91_adc_writel(st, AT91_SAMA5D2_COR, cor);
 		at91_adc_writel(st, AT91_SAMA5D2_CHER, BIT(chan->channel));
 		at91_adc_writel(st, AT91_SAMA5D2_IER, BIT(chan->channel));
 		at91_adc_writel(st, AT91_SAMA5D2_CR, AT91_SAMA5D2_CR_START);
@@ -298,6 +334,8 @@ static int at91_adc_read_raw(struct iio_dev *indio_dev,
 
 		if (ret > 0) {
 			*val = st->conversion_value;
+			if (chan->scan_type.sign == 's')
+				*val = sign_extend32(*val, 11);
 			ret = IIO_VAL_INT;
 			st->conversion_done = false;
 		}
@@ -310,6 +348,8 @@ static int at91_adc_read_raw(struct iio_dev *indio_dev,
 
 	case IIO_CHAN_INFO_SCALE:
 		*val = st->vref_uv / 1000;
+		if (chan->differential)
+			*val *= 2;
 		*val2 = chan->scan_type.realbits;
 		return IIO_VAL_FRACTIONAL_LOG2;
 
@@ -444,6 +484,12 @@ static int at91_adc_probe(struct platform_device *pdev)
 
 	at91_adc_writel(st, AT91_SAMA5D2_CR, AT91_SAMA5D2_CR_SWRST);
 	at91_adc_writel(st, AT91_SAMA5D2_IDR, 0xffffffff);
+	/*
+	 * Transfer field must be set to 2 according to the datasheet and
+	 * allows different analog settings for each channel.
+	 */
+	at91_adc_writel(st, AT91_SAMA5D2_MR,
+			AT91_SAMA5D2_MR_TRANSFER(2) | AT91_SAMA5D2_MR_ANACH);
 
 	at91_adc_setup_samp_freq(st, st->soc_info.min_sample_rate);
 
diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c
index f284cd6a9..52430ba17 100644
--- a/drivers/iio/adc/at91_adc.c
+++ b/drivers/iio/adc/at91_adc.c
@@ -797,8 +797,8 @@ static u32 calc_startup_ticks_9x5(u32 startup_time, u32 adc_clk_khz)
 	 * Startup Time = <lookup_table_value> / ADC Clock
 	 */
 	const int startup_lookup[] = {
-		0  , 8  , 16 , 24 ,
-		64 , 80 , 96 , 112,
+		0,   8,   16,  24,
+		64,  80,  96,  112,
 		512, 576, 640, 704,
 		768, 832, 896, 960
 		};
@@ -924,14 +924,14 @@ static int at91_adc_probe_dt(struct at91_adc_state *st,
 			ret = -EINVAL;
 			goto error_ret;
 		}
-	        trig->name = name;
+		trig->name = name;
 
 		if (of_property_read_u32(trig_node, "trigger-value", &prop)) {
 			dev_err(&idev->dev, "Missing trigger-value property in the DT.\n");
 			ret = -EINVAL;
 			goto error_ret;
 		}
-	        trig->value = prop;
+		trig->value = prop;
 		trig->is_external = of_property_read_bool(trig_node, "trigger-external");
 		i++;
 	}
diff --git a/drivers/iio/adc/ina2xx-adc.c b/drivers/iio/adc/ina2xx-adc.c
index 65909d585..502f2fbe8 100644
--- a/drivers/iio/adc/ina2xx-adc.c
+++ b/drivers/iio/adc/ina2xx-adc.c
@@ -185,9 +185,9 @@ static int ina2xx_read_raw(struct iio_dev *indio_dev,
 	case IIO_CHAN_INFO_SCALE:
 		switch (chan->address) {
 		case INA2XX_SHUNT_VOLTAGE:
-			/* processed (mV) = raw*1000/shunt_div */
+			/* processed (mV) = raw/shunt_div */
 			*val2 = chip->config->shunt_div;
-			*val = 1000;
+			*val = 1;
 			return IIO_VAL_FRACTIONAL;
 
 		case INA2XX_BUS_VOLTAGE:
@@ -350,6 +350,23 @@ static ssize_t ina2xx_allow_async_readout_store(struct device *dev,
 	return len;
 }
 
+/*
+ * Set current LSB to 1mA, shunt is in uOhms
+ * (equation 13 in datasheet). We hardcode a Current_LSB
+ * of 1.0 x10-6. The only remaining parameter is RShunt.
+ * There is no need to expose the CALIBRATION register
+ * to the user for now. But we need to reset this register
+ * if the user updates RShunt after driver init, e.g upon
+ * reading an EEPROM/Probe-type value.
+ */
+static int ina2xx_set_calibration(struct ina2xx_chip_info *chip)
+{
+	u16 regval = DIV_ROUND_CLOSEST(chip->config->calibration_factor,
+				   chip->shunt_resistor);
+
+	return regmap_write(chip->regmap, INA2XX_CALIBRATION, regval);
+}
+
 static int set_shunt_resistor(struct ina2xx_chip_info *chip, unsigned int val)
 {
 	if (val <= 0 || val > chip->config->calibration_factor)
@@ -385,6 +402,11 @@ static ssize_t ina2xx_shunt_resistor_store(struct device *dev,
 	if (ret)
 		return ret;
 
+	/* Update the Calibration register */
+	ret = ina2xx_set_calibration(chip);
+	if (ret)
+		return ret;
+
 	return len;
 }
 
@@ -602,24 +624,11 @@ static const struct iio_info ina2xx_info = {
 /* Initialize the configuration and calibration registers. */
 static int ina2xx_init(struct ina2xx_chip_info *chip, unsigned int config)
 {
-	u16 regval;
-	int ret;
-
-	ret = regmap_write(chip->regmap, INA2XX_CONFIG, config);
+	int ret = regmap_write(chip->regmap, INA2XX_CONFIG, config);
 	if (ret)
 		return ret;
 
-	/*
-	 * Set current LSB to 1mA, shunt is in uOhms
-	 * (equation 13 in datasheet). We hardcode a Current_LSB
-	 * of 1.0 x10-6. The only remaining parameter is RShunt.
-	 * There is no need to expose the CALIBRATION register
-	 * to the user for now.
-	 */
-	regval = DIV_ROUND_CLOSEST(chip->config->calibration_factor,
-				   chip->shunt_resistor);
-
-	return regmap_write(chip->regmap, INA2XX_CALIBRATION, regval);
+	return ina2xx_set_calibration(chip);
 }
 
 static int ina2xx_probe(struct i2c_client *client,
diff --git a/drivers/iio/adc/lpc18xx_adc.c b/drivers/iio/adc/lpc18xx_adc.c
new file mode 100644
index 000000000..3ef18f4b2
--- /dev/null
+++ b/drivers/iio/adc/lpc18xx_adc.c
@@ -0,0 +1,231 @@
+/*
+ * IIO ADC driver for NXP LPC18xx ADC
+ *
+ * Copyright (C) 2016 Joachim Eastwood <manabian@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * UNSUPPORTED hardware features:
+ *  - Hardware triggers
+ *  - Burst mode
+ *  - Interrupts
+ *  - DMA
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/driver.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+
+/* LPC18XX ADC registers and bits */
+#define LPC18XX_ADC_CR			0x000
+#define  LPC18XX_ADC_CR_CLKDIV_SHIFT	8
+#define  LPC18XX_ADC_CR_PDN		BIT(21)
+#define  LPC18XX_ADC_CR_START_NOW	(0x1 << 24)
+#define LPC18XX_ADC_GDR			0x004
+
+/* Data register bits */
+#define LPC18XX_ADC_SAMPLE_SHIFT	6
+#define LPC18XX_ADC_SAMPLE_MASK		0x3ff
+#define LPC18XX_ADC_CONV_DONE		BIT(31)
+
+/* Clock should be 4.5 MHz or less */
+#define LPC18XX_ADC_CLK_TARGET		4500000
+
+struct lpc18xx_adc {
+	struct regulator *vref;
+	void __iomem *base;
+	struct device *dev;
+	struct mutex lock;
+	struct clk *clk;
+	u32 cr_reg;
+};
+
+#define LPC18XX_ADC_CHAN(_idx) {				\
+	.type = IIO_VOLTAGE,					\
+	.indexed = 1,						\
+	.channel = _idx,					\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),	\
+}
+
+static const struct iio_chan_spec lpc18xx_adc_iio_channels[] = {
+	LPC18XX_ADC_CHAN(0),
+	LPC18XX_ADC_CHAN(1),
+	LPC18XX_ADC_CHAN(2),
+	LPC18XX_ADC_CHAN(3),
+	LPC18XX_ADC_CHAN(4),
+	LPC18XX_ADC_CHAN(5),
+	LPC18XX_ADC_CHAN(6),
+	LPC18XX_ADC_CHAN(7),
+};
+
+static int lpc18xx_adc_read_chan(struct lpc18xx_adc *adc, unsigned int ch)
+{
+	int ret;
+	u32 reg;
+
+	reg = adc->cr_reg | BIT(ch) | LPC18XX_ADC_CR_START_NOW;
+	writel(reg, adc->base + LPC18XX_ADC_CR);
+
+	ret = readl_poll_timeout(adc->base + LPC18XX_ADC_GDR, reg,
+				 reg & LPC18XX_ADC_CONV_DONE, 3, 9);
+	if (ret) {
+		dev_warn(adc->dev, "adc read timed out\n");
+		return ret;
+	}
+
+	return (reg >> LPC18XX_ADC_SAMPLE_SHIFT) & LPC18XX_ADC_SAMPLE_MASK;
+}
+
+static int lpc18xx_adc_read_raw(struct iio_dev *indio_dev,
+				struct iio_chan_spec const *chan,
+				int *val, int *val2, long mask)
+{
+	struct lpc18xx_adc *adc = iio_priv(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		mutex_lock(&adc->lock);
+		*val = lpc18xx_adc_read_chan(adc, chan->channel);
+		mutex_unlock(&adc->lock);
+		if (*val < 0)
+			return *val;
+
+		return IIO_VAL_INT;
+
+	case IIO_CHAN_INFO_SCALE:
+		*val = regulator_get_voltage(adc->vref) / 1000;
+		*val2 = 10;
+
+		return IIO_VAL_FRACTIONAL_LOG2;
+	}
+
+	return -EINVAL;
+}
+
+static const struct iio_info lpc18xx_adc_info = {
+	.read_raw = lpc18xx_adc_read_raw,
+	.driver_module = THIS_MODULE,
+};
+
+static int lpc18xx_adc_probe(struct platform_device *pdev)
+{
+	struct iio_dev *indio_dev;
+	struct lpc18xx_adc *adc;
+	struct resource *res;
+	unsigned int clkdiv;
+	unsigned long rate;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*adc));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, indio_dev);
+	adc = iio_priv(indio_dev);
+	adc->dev = &pdev->dev;
+	mutex_init(&adc->lock);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	adc->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(adc->base))
+		return PTR_ERR(adc->base);
+
+	adc->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(adc->clk)) {
+		dev_err(&pdev->dev, "error getting clock\n");
+		return PTR_ERR(adc->clk);
+	}
+
+	rate = clk_get_rate(adc->clk);
+	clkdiv = DIV_ROUND_UP(rate, LPC18XX_ADC_CLK_TARGET);
+
+	adc->vref = devm_regulator_get(&pdev->dev, "vref");
+	if (IS_ERR(adc->vref)) {
+		dev_err(&pdev->dev, "error getting regulator\n");
+		return PTR_ERR(adc->vref);
+	}
+
+	indio_dev->name = dev_name(&pdev->dev);
+	indio_dev->dev.parent = &pdev->dev;
+	indio_dev->info = &lpc18xx_adc_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = lpc18xx_adc_iio_channels;
+	indio_dev->num_channels = ARRAY_SIZE(lpc18xx_adc_iio_channels);
+
+	ret = regulator_enable(adc->vref);
+	if (ret) {
+		dev_err(&pdev->dev, "unable to enable regulator\n");
+		return ret;
+	}
+
+	ret = clk_prepare_enable(adc->clk);
+	if (ret) {
+		dev_err(&pdev->dev, "unable to enable clock\n");
+		goto dis_reg;
+	}
+
+	adc->cr_reg = (clkdiv << LPC18XX_ADC_CR_CLKDIV_SHIFT) |
+			LPC18XX_ADC_CR_PDN;
+	writel(adc->cr_reg, adc->base + LPC18XX_ADC_CR);
+
+	ret = iio_device_register(indio_dev);
+	if (ret) {
+		dev_err(&pdev->dev, "unable to register device\n");
+		goto dis_clk;
+	}
+
+	return 0;
+
+dis_clk:
+	writel(0, adc->base + LPC18XX_ADC_CR);
+	clk_disable_unprepare(adc->clk);
+dis_reg:
+	regulator_disable(adc->vref);
+	return ret;
+}
+
+static int lpc18xx_adc_remove(struct platform_device *pdev)
+{
+	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+	struct lpc18xx_adc *adc = iio_priv(indio_dev);
+
+	iio_device_unregister(indio_dev);
+
+	writel(0, adc->base + LPC18XX_ADC_CR);
+	clk_disable_unprepare(adc->clk);
+	regulator_disable(adc->vref);
+
+	return 0;
+}
+
+static const struct of_device_id lpc18xx_adc_match[] = {
+	{ .compatible = "nxp,lpc1850-adc" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, lpc18xx_adc_match);
+
+static struct platform_driver lpc18xx_adc_driver = {
+	.probe	= lpc18xx_adc_probe,
+	.remove	= lpc18xx_adc_remove,
+	.driver	= {
+		.name = "lpc18xx-adc",
+		.of_match_table = lpc18xx_adc_match,
+	},
+};
+module_platform_driver(lpc18xx_adc_driver);
+
+MODULE_DESCRIPTION("LPC18xx ADC driver");
+MODULE_AUTHOR("Joachim Eastwood <manabian@gmail.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/adc/mcp3422.c b/drivers/iio/adc/mcp3422.c
index d7b36efd2..d1172dc1e 100644
--- a/drivers/iio/adc/mcp3422.c
+++ b/drivers/iio/adc/mcp3422.c
@@ -61,9 +61,9 @@
 
 static const int mcp3422_scales[4][4] = {
 	{ 1000000, 500000, 250000, 125000 },
-	{ 250000 , 125000, 62500 , 31250  },
-	{ 62500  , 31250 , 15625 , 7812   },
-	{ 15625  , 7812  , 3906  , 1953   } };
+	{ 250000,  125000, 62500,  31250  },
+	{ 62500,   31250,  15625,  7812   },
+	{ 15625,   7812,   3906,   1953   } };
 
 /* Constant msleep times for data acquisitions */
 static const int mcp3422_read_times[4] = {
diff --git a/drivers/iio/adc/mxs-lradc.c b/drivers/iio/adc/mxs-lradc.c
index 33051b87a..ad26da1ed 100644
--- a/drivers/iio/adc/mxs-lradc.c
+++ b/drivers/iio/adc/mxs-lradc.c
@@ -686,6 +686,17 @@ static void mxs_lradc_prepare_pressure(struct mxs_lradc *lradc)
 
 static void mxs_lradc_enable_touch_detection(struct mxs_lradc *lradc)
 {
+	/* Configure the touchscreen type */
+	if (lradc->soc == IMX28_LRADC) {
+		mxs_lradc_reg_clear(lradc, LRADC_CTRL0_MX28_TOUCH_SCREEN_TYPE,
+				    LRADC_CTRL0);
+
+		if (lradc->use_touchscreen == MXS_LRADC_TOUCHSCREEN_5WIRE)
+			mxs_lradc_reg_set(lradc,
+					  LRADC_CTRL0_MX28_TOUCH_SCREEN_TYPE,
+					  LRADC_CTRL0);
+	}
+
 	mxs_lradc_setup_touch_detection(lradc);
 
 	lradc->cur_plate = LRADC_TOUCH;
@@ -1127,6 +1138,7 @@ static int mxs_lradc_ts_register(struct mxs_lradc *lradc)
 	__set_bit(EV_ABS, input->evbit);
 	__set_bit(EV_KEY, input->evbit);
 	__set_bit(BTN_TOUCH, input->keybit);
+	__set_bit(INPUT_PROP_DIRECT, input->propbit);
 	input_set_abs_params(input, ABS_X, 0, LRADC_SINGLE_SAMPLE_MASK, 0, 0);
 	input_set_abs_params(input, ABS_Y, 0, LRADC_SINGLE_SAMPLE_MASK, 0, 0);
 	input_set_abs_params(input, ABS_PRESSURE, 0, LRADC_SINGLE_SAMPLE_MASK,
@@ -1475,18 +1487,13 @@ static const struct iio_chan_spec mx28_lradc_chan_spec[] = {
 	MXS_ADC_CHAN(15, IIO_VOLTAGE, "VDD5V"),
 };
 
-static int mxs_lradc_hw_init(struct mxs_lradc *lradc)
+static void mxs_lradc_hw_init(struct mxs_lradc *lradc)
 {
 	/* The ADC always uses DELAY CHANNEL 0. */
 	const u32 adc_cfg =
 		(1 << (LRADC_DELAY_TRIGGER_DELAYS_OFFSET + 0)) |
 		(LRADC_DELAY_TIMER_PER << LRADC_DELAY_DELAY_OFFSET);
 
-	int ret = stmp_reset_block(lradc->base);
-
-	if (ret)
-		return ret;
-
 	/* Configure DELAY CHANNEL 0 for generic ADC sampling. */
 	mxs_lradc_reg_wrt(lradc, adc_cfg, LRADC_DELAY(0));
 
@@ -1495,20 +1502,8 @@ static int mxs_lradc_hw_init(struct mxs_lradc *lradc)
 	mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(2));
 	mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(3));
 
-	/* Configure the touchscreen type */
-	if (lradc->soc == IMX28_LRADC) {
-		mxs_lradc_reg_clear(lradc, LRADC_CTRL0_MX28_TOUCH_SCREEN_TYPE,
-				    LRADC_CTRL0);
-
-	if (lradc->use_touchscreen == MXS_LRADC_TOUCHSCREEN_5WIRE)
-		mxs_lradc_reg_set(lradc, LRADC_CTRL0_MX28_TOUCH_SCREEN_TYPE,
-				  LRADC_CTRL0);
-	}
-
 	/* Start internal temperature sensing. */
 	mxs_lradc_reg_wrt(lradc, 0, LRADC_CTRL2);
-
-	return 0;
 }
 
 static void mxs_lradc_hw_stop(struct mxs_lradc *lradc)
@@ -1708,11 +1703,13 @@ static int mxs_lradc_probe(struct platform_device *pdev)
 		}
 	}
 
-	/* Configure the hardware. */
-	ret = mxs_lradc_hw_init(lradc);
+	ret = stmp_reset_block(lradc->base);
 	if (ret)
 		goto err_dev;
 
+	/* Configure the hardware. */
+	mxs_lradc_hw_init(lradc);
+
 	/* Register the touchscreen input device. */
 	if (touch_ret == 0) {
 		ret = mxs_lradc_ts_register(lradc);
diff --git a/drivers/iio/adc/rockchip_saradc.c b/drivers/iio/adc/rockchip_saradc.c
index 9c311c1e1..f9ad6c2d6 100644
--- a/drivers/iio/adc/rockchip_saradc.c
+++ b/drivers/iio/adc/rockchip_saradc.c
@@ -159,6 +159,22 @@ static const struct rockchip_saradc_data rk3066_tsadc_data = {
 	.clk_rate = 50000,
 };
 
+static const struct iio_chan_spec rockchip_rk3399_saradc_iio_channels[] = {
+	ADC_CHANNEL(0, "adc0"),
+	ADC_CHANNEL(1, "adc1"),
+	ADC_CHANNEL(2, "adc2"),
+	ADC_CHANNEL(3, "adc3"),
+	ADC_CHANNEL(4, "adc4"),
+	ADC_CHANNEL(5, "adc5"),
+};
+
+static const struct rockchip_saradc_data rk3399_saradc_data = {
+	.num_bits = 10,
+	.channels = rockchip_rk3399_saradc_iio_channels,
+	.num_channels = ARRAY_SIZE(rockchip_rk3399_saradc_iio_channels),
+	.clk_rate = 1000000,
+};
+
 static const struct of_device_id rockchip_saradc_match[] = {
 	{
 		.compatible = "rockchip,saradc",
@@ -166,6 +182,9 @@ static const struct of_device_id rockchip_saradc_match[] = {
 	}, {
 		.compatible = "rockchip,rk3066-tsadc",
 		.data = &rk3066_tsadc_data,
+	}, {
+		.compatible = "rockchip,rk3399-saradc",
+		.data = &rk3399_saradc_data,
 	},
 	{},
 };
diff --git a/drivers/iio/adc/ti-adc081c.c b/drivers/iio/adc/ti-adc081c.c
index ecbc12138..9fd032d9f 100644
--- a/drivers/iio/adc/ti-adc081c.c
+++ b/drivers/iio/adc/ti-adc081c.c
@@ -1,9 +1,21 @@
 /*
+ * TI ADC081C/ADC101C/ADC121C 8/10/12-bit ADC driver
+ *
  * Copyright (C) 2012 Avionic Design GmbH
+ * Copyright (C) 2016 Intel
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
+ *
+ * Datasheets:
+ *	http://www.ti.com/lit/ds/symlink/adc081c021.pdf
+ *	http://www.ti.com/lit/ds/symlink/adc101c021.pdf
+ *	http://www.ti.com/lit/ds/symlink/adc121c021.pdf
+ *
+ * The devices have a very similar interface and differ mostly in the number of
+ * bits handled. For the 8-bit and 10-bit models the least-significant 4 or 2
+ * bits of value registers are reserved.
  */
 
 #include <linux/err.h>
@@ -12,11 +24,17 @@
 #include <linux/of.h>
 
 #include <linux/iio/iio.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
 #include <linux/regulator/consumer.h>
 
 struct adc081c {
 	struct i2c_client *i2c;
 	struct regulator *ref;
+
+	/* 8, 10 or 12 */
+	int bits;
 };
 
 #define REG_CONV_RES 0x00
@@ -34,7 +52,7 @@ static int adc081c_read_raw(struct iio_dev *iio,
 		if (err < 0)
 			return err;
 
-		*value = (err >> 4) & 0xff;
+		*value = (err & 0xFFF) >> (12 - adc->bits);
 		return IIO_VAL_INT;
 
 	case IIO_CHAN_INFO_SCALE:
@@ -43,7 +61,7 @@ static int adc081c_read_raw(struct iio_dev *iio,
 			return err;
 
 		*value = err / 1000;
-		*shift = 8;
+		*shift = adc->bits;
 
 		return IIO_VAL_FRACTIONAL_LOG2;
 
@@ -54,10 +72,53 @@ static int adc081c_read_raw(struct iio_dev *iio,
 	return -EINVAL;
 }
 
-static const struct iio_chan_spec adc081c_channel = {
-	.type = IIO_VOLTAGE,
-	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
-	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+#define ADCxx1C_CHAN(_bits) {					\
+	.type = IIO_VOLTAGE,					\
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),	\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
+	.scan_type = {						\
+		.sign = 'u',					\
+		.realbits = (_bits),				\
+		.storagebits = 16,				\
+		.shift = 12 - (_bits),				\
+		.endianness = IIO_CPU,				\
+	},							\
+}
+
+#define DEFINE_ADCxx1C_CHANNELS(_name, _bits)				\
+	static const struct iio_chan_spec _name ## _channels[] = {	\
+		ADCxx1C_CHAN((_bits)),					\
+		IIO_CHAN_SOFT_TIMESTAMP(1),				\
+	};								\
+
+#define ADC081C_NUM_CHANNELS 2
+
+struct adcxx1c_model {
+	const struct iio_chan_spec* channels;
+	int bits;
+};
+
+#define ADCxx1C_MODEL(_name, _bits)					\
+	{								\
+		.channels = _name ## _channels,				\
+		.bits = (_bits),					\
+	}
+
+DEFINE_ADCxx1C_CHANNELS(adc081c,  8);
+DEFINE_ADCxx1C_CHANNELS(adc101c, 10);
+DEFINE_ADCxx1C_CHANNELS(adc121c, 12);
+
+/* Model ids are indexes in _models array */
+enum adcxx1c_model_id {
+	ADC081C = 0,
+	ADC101C = 1,
+	ADC121C = 2,
+};
+
+static struct adcxx1c_model adcxx1c_models[] = {
+	ADCxx1C_MODEL(adc081c,  8),
+	ADCxx1C_MODEL(adc101c, 10),
+	ADCxx1C_MODEL(adc121c, 12),
 };
 
 static const struct iio_info adc081c_info = {
@@ -65,11 +126,30 @@ static const struct iio_info adc081c_info = {
 	.driver_module = THIS_MODULE,
 };
 
+static irqreturn_t adc081c_trigger_handler(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct adc081c *data = iio_priv(indio_dev);
+	u16 buf[8]; /* 2 bytes data + 6 bytes padding + 8 bytes timestamp */
+	int ret;
+
+	ret = i2c_smbus_read_word_swapped(data->i2c, REG_CONV_RES);
+	if (ret < 0)
+		goto out;
+	buf[0] = ret;
+	iio_push_to_buffers_with_timestamp(indio_dev, buf, iio_get_time_ns());
+out:
+	iio_trigger_notify_done(indio_dev->trig);
+	return IRQ_HANDLED;
+}
+
 static int adc081c_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id)
 {
 	struct iio_dev *iio;
 	struct adc081c *adc;
+	struct adcxx1c_model *model = &adcxx1c_models[id->driver_data];
 	int err;
 
 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA))
@@ -81,6 +161,7 @@ static int adc081c_probe(struct i2c_client *client,
 
 	adc = iio_priv(iio);
 	adc->i2c = client;
+	adc->bits = model->bits;
 
 	adc->ref = devm_regulator_get(&client->dev, "vref");
 	if (IS_ERR(adc->ref))
@@ -95,18 +176,26 @@ static int adc081c_probe(struct i2c_client *client,
 	iio->modes = INDIO_DIRECT_MODE;
 	iio->info = &adc081c_info;
 
-	iio->channels = &adc081c_channel;
-	iio->num_channels = 1;
+	iio->channels = model->channels;
+	iio->num_channels = ADC081C_NUM_CHANNELS;
+
+	err = iio_triggered_buffer_setup(iio, NULL, adc081c_trigger_handler, NULL);
+	if (err < 0) {
+		dev_err(&client->dev, "iio triggered buffer setup failed\n");
+		goto err_regulator_disable;
+	}
 
 	err = iio_device_register(iio);
 	if (err < 0)
-		goto regulator_disable;
+		goto err_buffer_cleanup;
 
 	i2c_set_clientdata(client, iio);
 
 	return 0;
 
-regulator_disable:
+err_buffer_cleanup:
+	iio_triggered_buffer_cleanup(iio);
+err_regulator_disable:
 	regulator_disable(adc->ref);
 
 	return err;
@@ -118,13 +207,16 @@ static int adc081c_remove(struct i2c_client *client)
 	struct adc081c *adc = iio_priv(iio);
 
 	iio_device_unregister(iio);
+	iio_triggered_buffer_cleanup(iio);
 	regulator_disable(adc->ref);
 
 	return 0;
 }
 
 static const struct i2c_device_id adc081c_id[] = {
-	{ "adc081c", 0 },
+	{ "adc081c", ADC081C },
+	{ "adc101c", ADC101C },
+	{ "adc121c", ADC121C },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, adc081c_id);
@@ -132,6 +224,8 @@ MODULE_DEVICE_TABLE(i2c, adc081c_id);
 #ifdef CONFIG_OF
 static const struct of_device_id adc081c_of_match[] = {
 	{ .compatible = "ti,adc081c" },
+	{ .compatible = "ti,adc101c" },
+	{ .compatible = "ti,adc121c" },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, adc081c_of_match);
@@ -149,5 +243,5 @@ static struct i2c_driver adc081c_driver = {
 module_i2c_driver(adc081c_driver);
 
 MODULE_AUTHOR("Thierry Reding <thierry.reding@avionic-design.de>");
-MODULE_DESCRIPTION("Texas Instruments ADC081C021/027 driver");
+MODULE_DESCRIPTION("Texas Instruments ADC081C/ADC101C/ADC121C driver");
 MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/adc/vf610_adc.c b/drivers/iio/adc/vf610_adc.c
index b10f629cc..653bf1379 100644
--- a/drivers/iio/adc/vf610_adc.c
+++ b/drivers/iio/adc/vf610_adc.c
@@ -714,19 +714,19 @@ static int vf610_write_raw(struct iio_dev *indio_dev,
 	int i;
 
 	switch (mask) {
-		case IIO_CHAN_INFO_SAMP_FREQ:
-			for (i = 0;
-				i < ARRAY_SIZE(info->sample_freq_avail);
-				i++)
-				if (val == info->sample_freq_avail[i]) {
-					info->adc_feature.sample_rate = i;
-					vf610_adc_sample_set(info);
-					return 0;
-				}
-			break;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		for (i = 0;
+			i < ARRAY_SIZE(info->sample_freq_avail);
+			i++)
+			if (val == info->sample_freq_avail[i]) {
+				info->adc_feature.sample_rate = i;
+				vf610_adc_sample_set(info);
+				return 0;
+			}
+		break;
 
-		default:
-			break;
+	default:
+		break;
 	}
 
 	return -EINVAL;