Linux-libre 4.5-gnu

13 files changed, 3015 insertions, 16 deletions

diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 1e7aded53..283ded774 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -175,6 +175,7 @@ config DA9150_GPADC
 config EXYNOS_ADC
 	tristate "Exynos ADC driver support"
 	depends on ARCH_EXYNOS || ARCH_S3C24XX || ARCH_S3C64XX || (OF && COMPILE_TEST)
+	depends on HAS_IOMEM
 	help
 	  Core support for the ADC block found in the Samsung EXYNOS series
 	  of SoCs for drivers such as the touchscreen and hwmon to use to share
@@ -194,6 +195,26 @@ config HI8435
 	  This driver can also be built as a module. If so, the module will be
 	  called hi8435.
 
+config INA2XX_ADC
+	tristate "Texas Instruments INA2xx Power Monitors IIO driver"
+	depends on I2C && !SENSORS_INA2XX
+	select REGMAP_I2C
+	select IIO_BUFFER
+	select IIO_KFIFO_BUF
+	help
+	  Say yes here to build support for TI INA2xx family of Power Monitors.
+	  This driver is mutually exclusive with the HWMON version.
+
+config IMX7D_ADC
+	tristate "IMX7D ADC driver"
+	depends on ARCH_MXC || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  Say yes here to build support for IMX7D ADC.
+
+	  This driver can also be built as a module. If so, the module will be
+	  called imx7d_adc.
+
 config LP8788_ADC
 	tristate "LP8788 ADC driver"
 	depends on MFD_LP8788
@@ -275,6 +296,14 @@ config NAU7802
 	  To compile this driver as a module, choose M here: the
 	  module will be called nau7802.
 
+config PALMAS_GPADC
+	tristate "TI Palmas General Purpose ADC"
+	depends on MFD_PALMAS
+	help
+	  Palmas series pmic chip by Texas Instruments (twl6035/6037)
+	  is used in smartphones and tablets and supports a 16 channel
+	  general purpose ADC.
+
 config QCOM_SPMI_IADC
 	tristate "Qualcomm SPMI PMIC current ADC"
 	depends on SPMI
@@ -324,15 +353,25 @@ config TI_ADC081C
 	  called ti-adc081c.
 
 config TI_ADC128S052
-	tristate "Texas Instruments ADC128S052/ADC122S021"
+	tristate "Texas Instruments ADC128S052/ADC122S021/ADC124S021"
 	depends on SPI
 	help
-	  If you say yes here you get support for Texas Instruments ADC128S052
-	  and ADC122S021 chips.
+	  If you say yes here you get support for Texas Instruments ADC128S052,
+	  ADC122S021 and ADC124S021 chips.
 
 	  This driver can also be built as a module. If so, the module will be
 	  called ti-adc128s052.
 
+config TI_ADS8688
+	tristate "Texas Instruments ADS8688"
+	depends on SPI && OF
+	help
+	  If you say yes here you get support for Texas Instruments ADS8684 and
+	  and ADS8688 ADC chips
+
+	  This driver can also be built as a module. If so, the module will be
+	  called ti-ads8688.
+
 config TI_AM335X_ADC
 	tristate "TI's AM335X ADC driver"
 	depends on MFD_TI_AM335X_TSCADC
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index 99b37a963..6435780e9 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -20,6 +20,8 @@ obj-$(CONFIG_CC10001_ADC) += cc10001_adc.o
 obj-$(CONFIG_DA9150_GPADC) += da9150-gpadc.o
 obj-$(CONFIG_EXYNOS_ADC) += exynos_adc.o
 obj-$(CONFIG_HI8435) += hi8435.o
+obj-$(CONFIG_IMX7D_ADC) += imx7d_adc.o
+obj-$(CONFIG_INA2XX_ADC) += ina2xx-adc.o
 obj-$(CONFIG_LP8788_ADC) += lp8788_adc.o
 obj-$(CONFIG_MAX1027) += max1027.o
 obj-$(CONFIG_MAX1363) += max1363.o
@@ -27,11 +29,13 @@ obj-$(CONFIG_MCP320X) += mcp320x.o
 obj-$(CONFIG_MCP3422) += mcp3422.o
 obj-$(CONFIG_MEN_Z188_ADC) += men_z188_adc.o
 obj-$(CONFIG_NAU7802) += nau7802.o
+obj-$(CONFIG_PALMAS_GPADC) += palmas_gpadc.o
 obj-$(CONFIG_QCOM_SPMI_IADC) += qcom-spmi-iadc.o
 obj-$(CONFIG_QCOM_SPMI_VADC) += qcom-spmi-vadc.o
 obj-$(CONFIG_ROCKCHIP_SARADC) += rockchip_saradc.o
 obj-$(CONFIG_TI_ADC081C) += ti-adc081c.o
 obj-$(CONFIG_TI_ADC128S052) += ti-adc128s052.o
+obj-$(CONFIG_TI_ADS8688) += ti-ads8688.o
 obj-$(CONFIG_TI_AM335X_ADC) += ti_am335x_adc.o
 obj-$(CONFIG_TWL4030_MADC) += twl4030-madc.o
 obj-$(CONFIG_TWL6030_GPADC) += twl6030-gpadc.o
diff --git a/drivers/iio/adc/ad7793.c b/drivers/iio/adc/ad7793.c
index 4d960d3b9..7b07bb651 100644
--- a/drivers/iio/adc/ad7793.c
+++ b/drivers/iio/adc/ad7793.c
@@ -478,10 +478,9 @@ static int ad7793_read_raw(struct iio_dev *indio_dev,
 				*val2 = st->
 					scale_avail[(st->conf >> 8) & 0x7][1];
 				return IIO_VAL_INT_PLUS_NANO;
-			} else {
-				/* 1170mV / 2^23 * 6 */
-				scale_uv = (1170ULL * 1000000000ULL * 6ULL);
 			}
+			/* 1170mV / 2^23 * 6 */
+			scale_uv = (1170ULL * 1000000000ULL * 6ULL);
 			break;
 		case IIO_TEMP:
 				/* 1170mV / 0.81 mV/C / 2^23 */
diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c
index 7b40925dd..f284cd6a9 100644
--- a/drivers/iio/adc/at91_adc.c
+++ b/drivers/iio/adc/at91_adc.c
@@ -742,7 +742,7 @@ static int at91_adc_of_get_resolution(struct at91_adc_state *st,
 		return count;
 	}
 
-	resolutions = kmalloc(count * sizeof(*resolutions), GFP_KERNEL);
+	resolutions = kmalloc_array(count, sizeof(*resolutions), GFP_KERNEL);
 	if (!resolutions)
 		return -ENOMEM;
 
diff --git a/drivers/iio/adc/exynos_adc.c b/drivers/iio/adc/exynos_adc.c
index 3a2dbb3b4..c15756d7b 100644
--- a/drivers/iio/adc/exynos_adc.c
+++ b/drivers/iio/adc/exynos_adc.c
@@ -35,6 +35,7 @@
 #include <linux/regulator/consumer.h>
 #include <linux/of_platform.h>
 #include <linux/err.h>
+#include <linux/input.h>
 
 #include <linux/iio/iio.h>
 #include <linux/iio/machine.h>
@@ -42,12 +43,18 @@
 #include <linux/mfd/syscon.h>
 #include <linux/regmap.h>
 
+#include <linux/platform_data/touchscreen-s3c2410.h>
+
 /* S3C/EXYNOS4412/5250 ADC_V1 registers definitions */
 #define ADC_V1_CON(x)		((x) + 0x00)
+#define ADC_V1_TSC(x)		((x) + 0x04)
 #define ADC_V1_DLY(x)		((x) + 0x08)
 #define ADC_V1_DATX(x)		((x) + 0x0C)
+#define ADC_V1_DATY(x)		((x) + 0x10)
+#define ADC_V1_UPDN(x)		((x) + 0x14)
 #define ADC_V1_INTCLR(x)	((x) + 0x18)
 #define ADC_V1_MUX(x)		((x) + 0x1c)
+#define ADC_V1_CLRINTPNDNUP(x)	((x) + 0x20)
 
 /* S3C2410 ADC registers definitions */
 #define ADC_S3C2410_MUX(x)	((x) + 0x18)
@@ -71,6 +78,30 @@
 #define ADC_S3C2410_DATX_MASK	0x3FF
 #define ADC_S3C2416_CON_RES_SEL	(1u << 3)
 
+/* touch screen always uses channel 0 */
+#define ADC_S3C2410_MUX_TS	0
+
+/* ADCTSC Register Bits */
+#define ADC_S3C2443_TSC_UD_SEN		(1u << 8)
+#define ADC_S3C2410_TSC_YM_SEN		(1u << 7)
+#define ADC_S3C2410_TSC_YP_SEN		(1u << 6)
+#define ADC_S3C2410_TSC_XM_SEN		(1u << 5)
+#define ADC_S3C2410_TSC_XP_SEN		(1u << 4)
+#define ADC_S3C2410_TSC_PULL_UP_DISABLE	(1u << 3)
+#define ADC_S3C2410_TSC_AUTO_PST	(1u << 2)
+#define ADC_S3C2410_TSC_XY_PST(x)	(((x) & 0x3) << 0)
+
+#define ADC_TSC_WAIT4INT (ADC_S3C2410_TSC_YM_SEN | \
+			 ADC_S3C2410_TSC_YP_SEN | \
+			 ADC_S3C2410_TSC_XP_SEN | \
+			 ADC_S3C2410_TSC_XY_PST(3))
+
+#define ADC_TSC_AUTOPST	(ADC_S3C2410_TSC_YM_SEN | \
+			 ADC_S3C2410_TSC_YP_SEN | \
+			 ADC_S3C2410_TSC_XP_SEN | \
+			 ADC_S3C2410_TSC_AUTO_PST | \
+			 ADC_S3C2410_TSC_XY_PST(0))
+
 /* Bit definitions for ADC_V2 */
 #define ADC_V2_CON1_SOFT_RESET	(1u << 2)
 
@@ -88,7 +119,9 @@
 /* Bit definitions common for ADC_V1 and ADC_V2 */
 #define ADC_CON_EN_START	(1u << 0)
 #define ADC_CON_EN_START_MASK	(0x3 << 0)
+#define ADC_DATX_PRESSED	(1u << 15)
 #define ADC_DATX_MASK		0xFFF
+#define ADC_DATY_MASK		0xFFF
 
 #define EXYNOS_ADC_TIMEOUT	(msecs_to_jiffies(100))
 
@@ -98,17 +131,24 @@
 struct exynos_adc {
 	struct exynos_adc_data	*data;
 	struct device		*dev;
+	struct input_dev	*input;
 	void __iomem		*regs;
 	struct regmap		*pmu_map;
 	struct clk		*clk;
 	struct clk		*sclk;
 	unsigned int		irq;
+	unsigned int		tsirq;
+	unsigned int		delay;
 	struct regulator	*vdd;
 
 	struct completion	completion;
 
 	u32			value;
 	unsigned int            version;
+
+	bool			read_ts;
+	u32			ts_x;
+	u32			ts_y;
 };
 
 struct exynos_adc_data {
@@ -197,6 +237,9 @@ static void exynos_adc_v1_init_hw(struct exynos_adc *info)
 	/* Enable 12-bit ADC resolution */
 	con1 |= ADC_V1_CON_RES;
 	writel(con1, ADC_V1_CON(info->regs));
+
+	/* set touchscreen delay */
+	writel(info->delay, ADC_V1_DLY(info->regs));
 }
 
 static void exynos_adc_v1_exit_hw(struct exynos_adc *info)
@@ -480,8 +523,8 @@ static int exynos_read_raw(struct iio_dev *indio_dev,
 	if (info->data->start_conv)
 		info->data->start_conv(info, chan->address);
 
-	timeout = wait_for_completion_timeout
-			(&info->completion, EXYNOS_ADC_TIMEOUT);
+	timeout = wait_for_completion_timeout(&info->completion,
+					      EXYNOS_ADC_TIMEOUT);
 	if (timeout == 0) {
 		dev_warn(&indio_dev->dev, "Conversion timed out! Resetting\n");
 		if (info->data->init_hw)
@@ -498,13 +541,55 @@ static int exynos_read_raw(struct iio_dev *indio_dev,
 	return ret;
 }
 
+static int exynos_read_s3c64xx_ts(struct iio_dev *indio_dev, int *x, int *y)
+{
+	struct exynos_adc *info = iio_priv(indio_dev);
+	unsigned long timeout;
+	int ret;
+
+	mutex_lock(&indio_dev->mlock);
+	info->read_ts = true;
+
+	reinit_completion(&info->completion);
+
+	writel(ADC_S3C2410_TSC_PULL_UP_DISABLE | ADC_TSC_AUTOPST,
+	       ADC_V1_TSC(info->regs));
+
+	/* Select the ts channel to be used and Trigger conversion */
+	info->data->start_conv(info, ADC_S3C2410_MUX_TS);
+
+	timeout = wait_for_completion_timeout(&info->completion,
+					      EXYNOS_ADC_TIMEOUT);
+	if (timeout == 0) {
+		dev_warn(&indio_dev->dev, "Conversion timed out! Resetting\n");
+		if (info->data->init_hw)
+			info->data->init_hw(info);
+		ret = -ETIMEDOUT;
+	} else {
+		*x = info->ts_x;
+		*y = info->ts_y;
+		ret = 0;
+	}
+
+	info->read_ts = false;
+	mutex_unlock(&indio_dev->mlock);
+
+	return ret;
+}
+
 static irqreturn_t exynos_adc_isr(int irq, void *dev_id)
 {
 	struct exynos_adc *info = (struct exynos_adc *)dev_id;
 	u32 mask = info->data->mask;
 
 	/* Read value */
-	info->value = readl(ADC_V1_DATX(info->regs)) & mask;
+	if (info->read_ts) {
+		info->ts_x = readl(ADC_V1_DATX(info->regs));
+		info->ts_y = readl(ADC_V1_DATY(info->regs));
+		writel(ADC_TSC_WAIT4INT | ADC_S3C2443_TSC_UD_SEN, ADC_V1_TSC(info->regs));
+	} else {
+		info->value = readl(ADC_V1_DATX(info->regs)) & mask;
+	}
 
 	/* clear irq */
 	if (info->data->clear_irq)
@@ -515,6 +600,46 @@ static irqreturn_t exynos_adc_isr(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+/*
+ * Here we (ab)use a threaded interrupt handler to stay running
+ * for as long as the touchscreen remains pressed, we report
+ * a new event with the latest data and then sleep until the
+ * next timer tick. This mirrors the behavior of the old
+ * driver, with much less code.
+ */
+static irqreturn_t exynos_ts_isr(int irq, void *dev_id)
+{
+	struct exynos_adc *info = dev_id;
+	struct iio_dev *dev = dev_get_drvdata(info->dev);
+	u32 x, y;
+	bool pressed;
+	int ret;
+
+	while (info->input->users) {
+		ret = exynos_read_s3c64xx_ts(dev, &x, &y);
+		if (ret == -ETIMEDOUT)
+			break;
+
+		pressed = x & y & ADC_DATX_PRESSED;
+		if (!pressed) {
+			input_report_key(info->input, BTN_TOUCH, 0);
+			input_sync(info->input);
+			break;
+		}
+
+		input_report_abs(info->input, ABS_X, x & ADC_DATX_MASK);
+		input_report_abs(info->input, ABS_Y, y & ADC_DATY_MASK);
+		input_report_key(info->input, BTN_TOUCH, 1);
+		input_sync(info->input);
+
+		msleep(1);
+	};
+
+	writel(0, ADC_V1_CLRINTPNDNUP(info->regs));
+
+	return IRQ_HANDLED;
+}
+
 static int exynos_adc_reg_access(struct iio_dev *indio_dev,
 			      unsigned reg, unsigned writeval,
 			      unsigned *readval)
@@ -566,18 +691,72 @@ static int exynos_adc_remove_devices(struct device *dev, void *c)
 	return 0;
 }
 
+static int exynos_adc_ts_open(struct input_dev *dev)
+{
+	struct exynos_adc *info = input_get_drvdata(dev);
+
+	enable_irq(info->tsirq);
+
+	return 0;
+}
+
+static void exynos_adc_ts_close(struct input_dev *dev)
+{
+	struct exynos_adc *info = input_get_drvdata(dev);
+
+	disable_irq(info->tsirq);
+}
+
+static int exynos_adc_ts_init(struct exynos_adc *info)
+{
+	int ret;
+
+	if (info->tsirq <= 0)
+		return -ENODEV;
+
+	info->input = input_allocate_device();
+	if (!info->input)
+		return -ENOMEM;
+
+	info->input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	info->input->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+
+	input_set_abs_params(info->input, ABS_X, 0, 0x3FF, 0, 0);
+	input_set_abs_params(info->input, ABS_Y, 0, 0x3FF, 0, 0);
+
+	info->input->name = "S3C24xx TouchScreen";
+	info->input->id.bustype = BUS_HOST;
+	info->input->open = exynos_adc_ts_open;
+	info->input->close = exynos_adc_ts_close;
+
+	input_set_drvdata(info->input, info);
+
+	ret = input_register_device(info->input);
+	if (ret) {
+		input_free_device(info->input);
+		return ret;
+	}
+
+	disable_irq(info->tsirq);
+	ret = request_threaded_irq(info->tsirq, NULL, exynos_ts_isr,
+				   IRQF_ONESHOT, "touchscreen", info);
+	if (ret)
+		input_unregister_device(info->input);
+
+	return ret;
+}
+
 static int exynos_adc_probe(struct platform_device *pdev)
 {
 	struct exynos_adc *info = NULL;
 	struct device_node *np = pdev->dev.of_node;
+	struct s3c2410_ts_mach_info *pdata = dev_get_platdata(&pdev->dev);
 	struct iio_dev *indio_dev = NULL;
 	struct resource	*mem;
+	bool has_ts = false;
 	int ret = -ENODEV;
 	int irq;
 
-	if (!np)
-		return ret;
-
 	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(struct exynos_adc));
 	if (!indio_dev) {
 		dev_err(&pdev->dev, "failed allocating iio device\n");
@@ -613,8 +792,14 @@ static int exynos_adc_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "no irq resource?\n");
 		return irq;
 	}
-
 	info->irq = irq;
+
+	irq = platform_get_irq(pdev, 1);
+	if (irq == -EPROBE_DEFER)
+		return irq;
+
+	info->tsirq = irq;
+
 	info->dev = &pdev->dev;
 
 	init_completion(&info->completion);
@@ -680,6 +865,22 @@ static int exynos_adc_probe(struct platform_device *pdev)
 	if (info->data->init_hw)
 		info->data->init_hw(info);
 
+	/* leave out any TS related code if unreachable */
+	if (IS_REACHABLE(CONFIG_INPUT)) {
+		has_ts = of_property_read_bool(pdev->dev.of_node,
+					       "has-touchscreen") || pdata;
+	}
+
+	if (pdata)
+		info->delay = pdata->delay;
+	else
+		info->delay = 10000;
+
+	if (has_ts)
+		ret = exynos_adc_ts_init(info);
+	if (ret)
+		goto err_iio;
+
 	ret = of_platform_populate(np, exynos_adc_match, NULL, &indio_dev->dev);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "failed adding child nodes\n");
@@ -691,6 +892,11 @@ static int exynos_adc_probe(struct platform_device *pdev)
 err_of_populate:
 	device_for_each_child(&indio_dev->dev, NULL,
 				exynos_adc_remove_devices);
+	if (has_ts) {
+		input_unregister_device(info->input);
+		free_irq(info->tsirq, info);
+	}
+err_iio:
 	iio_device_unregister(indio_dev);
 err_irq:
 	free_irq(info->irq, info);
@@ -710,6 +916,10 @@ static int exynos_adc_remove(struct platform_device *pdev)
 	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
 	struct exynos_adc *info = iio_priv(indio_dev);
 
+	if (IS_REACHABLE(CONFIG_INPUT)) {
+		free_irq(info->tsirq, info);
+		input_unregister_device(info->input);
+	}
 	device_for_each_child(&indio_dev->dev, NULL,
 				exynos_adc_remove_devices);
 	iio_device_unregister(indio_dev);
diff --git a/drivers/iio/adc/imx7d_adc.c b/drivers/iio/adc/imx7d_adc.c
new file mode 100644
index 000000000..e2241ee94
--- /dev/null
+++ b/drivers/iio/adc/imx7d_adc.c
@@ -0,0 +1,609 @@
+/*
+ * Freescale i.MX7D ADC driver
+ *
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/driver.h>
+#include <linux/iio/sysfs.h>
+
+/* ADC register */
+#define IMX7D_REG_ADC_CH_A_CFG1			0x00
+#define IMX7D_REG_ADC_CH_A_CFG2			0x10
+#define IMX7D_REG_ADC_CH_B_CFG1			0x20
+#define IMX7D_REG_ADC_CH_B_CFG2			0x30
+#define IMX7D_REG_ADC_CH_C_CFG1			0x40
+#define IMX7D_REG_ADC_CH_C_CFG2			0x50
+#define IMX7D_REG_ADC_CH_D_CFG1			0x60
+#define IMX7D_REG_ADC_CH_D_CFG2			0x70
+#define IMX7D_REG_ADC_CH_SW_CFG			0x80
+#define IMX7D_REG_ADC_TIMER_UNIT		0x90
+#define IMX7D_REG_ADC_DMA_FIFO			0xa0
+#define IMX7D_REG_ADC_FIFO_STATUS		0xb0
+#define IMX7D_REG_ADC_INT_SIG_EN		0xc0
+#define IMX7D_REG_ADC_INT_EN			0xd0
+#define IMX7D_REG_ADC_INT_STATUS		0xe0
+#define IMX7D_REG_ADC_CHA_B_CNV_RSLT		0xf0
+#define IMX7D_REG_ADC_CHC_D_CNV_RSLT		0x100
+#define IMX7D_REG_ADC_CH_SW_CNV_RSLT		0x110
+#define IMX7D_REG_ADC_DMA_FIFO_DAT		0x120
+#define IMX7D_REG_ADC_ADC_CFG			0x130
+
+#define IMX7D_REG_ADC_CHANNEL_CFG2_BASE		0x10
+#define IMX7D_EACH_CHANNEL_REG_OFFSET		0x20
+
+#define IMX7D_REG_ADC_CH_CFG1_CHANNEL_EN			(0x1 << 31)
+#define IMX7D_REG_ADC_CH_CFG1_CHANNEL_SINGLE			BIT(30)
+#define IMX7D_REG_ADC_CH_CFG1_CHANNEL_AVG_EN			BIT(29)
+#define IMX7D_REG_ADC_CH_CFG1_CHANNEL_SEL(x)			((x) << 24)
+
+#define IMX7D_REG_ADC_CH_CFG2_AVG_NUM_4				(0x0 << 12)
+#define IMX7D_REG_ADC_CH_CFG2_AVG_NUM_8				(0x1 << 12)
+#define IMX7D_REG_ADC_CH_CFG2_AVG_NUM_16			(0x2 << 12)
+#define IMX7D_REG_ADC_CH_CFG2_AVG_NUM_32			(0x3 << 12)
+
+#define IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_4			(0x0 << 29)
+#define IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_8			(0x1 << 29)
+#define IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_16			(0x2 << 29)
+#define IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_32			(0x3 << 29)
+#define IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_64			(0x4 << 29)
+#define IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_128			(0x5 << 29)
+
+#define IMX7D_REG_ADC_ADC_CFG_ADC_CLK_DOWN			BIT(31)
+#define IMX7D_REG_ADC_ADC_CFG_ADC_POWER_DOWN			BIT(1)
+#define IMX7D_REG_ADC_ADC_CFG_ADC_EN				BIT(0)
+
+#define IMX7D_REG_ADC_INT_CHA_COV_INT_EN			BIT(8)
+#define IMX7D_REG_ADC_INT_CHB_COV_INT_EN			BIT(9)
+#define IMX7D_REG_ADC_INT_CHC_COV_INT_EN			BIT(10)
+#define IMX7D_REG_ADC_INT_CHD_COV_INT_EN			BIT(11)
+#define IMX7D_REG_ADC_INT_CHANNEL_INT_EN \
+	(IMX7D_REG_ADC_INT_CHA_COV_INT_EN | \
+	 IMX7D_REG_ADC_INT_CHB_COV_INT_EN | \
+	 IMX7D_REG_ADC_INT_CHC_COV_INT_EN | \
+	 IMX7D_REG_ADC_INT_CHD_COV_INT_EN)
+#define IMX7D_REG_ADC_INT_STATUS_CHANNEL_INT_STATUS		0xf00
+#define IMX7D_REG_ADC_INT_STATUS_CHANNEL_CONV_TIME_OUT		0xf0000
+
+#define IMX7D_ADC_TIMEOUT		msecs_to_jiffies(100)
+
+enum imx7d_adc_clk_pre_div {
+	IMX7D_ADC_ANALOG_CLK_PRE_DIV_4,
+	IMX7D_ADC_ANALOG_CLK_PRE_DIV_8,
+	IMX7D_ADC_ANALOG_CLK_PRE_DIV_16,
+	IMX7D_ADC_ANALOG_CLK_PRE_DIV_32,
+	IMX7D_ADC_ANALOG_CLK_PRE_DIV_64,
+	IMX7D_ADC_ANALOG_CLK_PRE_DIV_128,
+};
+
+enum imx7d_adc_average_num {
+	IMX7D_ADC_AVERAGE_NUM_4,
+	IMX7D_ADC_AVERAGE_NUM_8,
+	IMX7D_ADC_AVERAGE_NUM_16,
+	IMX7D_ADC_AVERAGE_NUM_32,
+};
+
+struct imx7d_adc_feature {
+	enum imx7d_adc_clk_pre_div clk_pre_div;
+	enum imx7d_adc_average_num avg_num;
+
+	u32 core_time_unit;	/* impact the sample rate */
+
+	bool average_en;
+};
+
+struct imx7d_adc {
+	struct device *dev;
+	void __iomem *regs;
+	struct clk *clk;
+
+	u32 vref_uv;
+	u32 value;
+	u32 channel;
+	u32 pre_div_num;
+
+	struct regulator *vref;
+	struct imx7d_adc_feature adc_feature;
+
+	struct completion completion;
+};
+
+struct imx7d_adc_analogue_core_clk {
+	u32 pre_div;
+	u32 reg_config;
+};
+
+#define IMX7D_ADC_ANALOGUE_CLK_CONFIG(_pre_div, _reg_conf) {	\
+	.pre_div = (_pre_div),					\
+	.reg_config = (_reg_conf),				\
+}
+
+static const struct imx7d_adc_analogue_core_clk imx7d_adc_analogue_clk[] = {
+	IMX7D_ADC_ANALOGUE_CLK_CONFIG(4, IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_4),
+	IMX7D_ADC_ANALOGUE_CLK_CONFIG(8, IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_8),
+	IMX7D_ADC_ANALOGUE_CLK_CONFIG(16, IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_16),
+	IMX7D_ADC_ANALOGUE_CLK_CONFIG(32, IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_32),
+	IMX7D_ADC_ANALOGUE_CLK_CONFIG(64, IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_64),
+	IMX7D_ADC_ANALOGUE_CLK_CONFIG(128, IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_128),
+};
+
+#define IMX7D_ADC_CHAN(_idx) {					\
+	.type = IIO_VOLTAGE,					\
+	.indexed = 1,						\
+	.channel = (_idx),					\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) |	\
+				BIT(IIO_CHAN_INFO_SAMP_FREQ),	\
+}
+
+static const struct iio_chan_spec imx7d_adc_iio_channels[] = {
+	IMX7D_ADC_CHAN(0),
+	IMX7D_ADC_CHAN(1),
+	IMX7D_ADC_CHAN(2),
+	IMX7D_ADC_CHAN(3),
+	IMX7D_ADC_CHAN(4),
+	IMX7D_ADC_CHAN(5),
+	IMX7D_ADC_CHAN(6),
+	IMX7D_ADC_CHAN(7),
+	IMX7D_ADC_CHAN(8),
+	IMX7D_ADC_CHAN(9),
+	IMX7D_ADC_CHAN(10),
+	IMX7D_ADC_CHAN(11),
+	IMX7D_ADC_CHAN(12),
+	IMX7D_ADC_CHAN(13),
+	IMX7D_ADC_CHAN(14),
+	IMX7D_ADC_CHAN(15),
+};
+
+static const u32 imx7d_adc_average_num[] = {
+	IMX7D_REG_ADC_CH_CFG2_AVG_NUM_4,
+	IMX7D_REG_ADC_CH_CFG2_AVG_NUM_8,
+	IMX7D_REG_ADC_CH_CFG2_AVG_NUM_16,
+	IMX7D_REG_ADC_CH_CFG2_AVG_NUM_32,
+};
+
+static void imx7d_adc_feature_config(struct imx7d_adc *info)
+{
+	info->adc_feature.clk_pre_div = IMX7D_ADC_ANALOG_CLK_PRE_DIV_4;
+	info->adc_feature.avg_num = IMX7D_ADC_AVERAGE_NUM_32;
+	info->adc_feature.core_time_unit = 1;
+	info->adc_feature.average_en = true;
+}
+
+static void imx7d_adc_sample_rate_set(struct imx7d_adc *info)
+{
+	struct imx7d_adc_feature *adc_feature = &info->adc_feature;
+	struct imx7d_adc_analogue_core_clk adc_analogure_clk;
+	u32 i;
+	u32 tmp_cfg1;
+	u32 sample_rate = 0;
+
+	/*
+	 * Before sample set, disable channel A,B,C,D. Here we
+	 * clear the bit 31 of register REG_ADC_CH_A\B\C\D_CFG1.
+	 */
+	for (i = 0; i < 4; i++) {
+		tmp_cfg1 =
+			readl(info->regs + i * IMX7D_EACH_CHANNEL_REG_OFFSET);
+		tmp_cfg1 &= ~IMX7D_REG_ADC_CH_CFG1_CHANNEL_EN;
+		writel(tmp_cfg1,
+		       info->regs + i * IMX7D_EACH_CHANNEL_REG_OFFSET);
+	}
+
+	adc_analogure_clk = imx7d_adc_analogue_clk[adc_feature->clk_pre_div];
+	sample_rate |= adc_analogure_clk.reg_config;
+	info->pre_div_num = adc_analogure_clk.pre_div;
+
+	sample_rate |= adc_feature->core_time_unit;
+	writel(sample_rate, info->regs + IMX7D_REG_ADC_TIMER_UNIT);
+}
+
+static void imx7d_adc_hw_init(struct imx7d_adc *info)
+{
+	u32 cfg;
+
+	/* power up and enable adc analogue core */
+	cfg = readl(info->regs + IMX7D_REG_ADC_ADC_CFG);
+	cfg &= ~(IMX7D_REG_ADC_ADC_CFG_ADC_CLK_DOWN |
+		 IMX7D_REG_ADC_ADC_CFG_ADC_POWER_DOWN);
+	cfg |= IMX7D_REG_ADC_ADC_CFG_ADC_EN;
+	writel(cfg, info->regs + IMX7D_REG_ADC_ADC_CFG);
+
+	/* enable channel A,B,C,D interrupt */
+	writel(IMX7D_REG_ADC_INT_CHANNEL_INT_EN,
+	       info->regs + IMX7D_REG_ADC_INT_SIG_EN);
+	writel(IMX7D_REG_ADC_INT_CHANNEL_INT_EN,
+	       info->regs + IMX7D_REG_ADC_INT_EN);
+
+	imx7d_adc_sample_rate_set(info);
+}
+
+static void imx7d_adc_channel_set(struct imx7d_adc *info)
+{
+	u32 cfg1 = 0;
+	u32 cfg2;
+	u32 channel;
+
+	channel = info->channel;
+
+	/* the channel choose single conversion, and enable average mode */
+	cfg1 |= (IMX7D_REG_ADC_CH_CFG1_CHANNEL_EN |
+		 IMX7D_REG_ADC_CH_CFG1_CHANNEL_SINGLE);
+	if (info->adc_feature.average_en)
+		cfg1 |= IMX7D_REG_ADC_CH_CFG1_CHANNEL_AVG_EN;
+
+	/*
+	 * physical channel 0 chose logical channel A
+	 * physical channel 1 chose logical channel B
+	 * physical channel 2 chose logical channel C
+	 * physical channel 3 chose logical channel D
+	 */
+	cfg1 |= IMX7D_REG_ADC_CH_CFG1_CHANNEL_SEL(channel);
+
+	/*
+	 * read register REG_ADC_CH_A\B\C\D_CFG2, according to the
+	 * channel chosen
+	 */
+	cfg2 = readl(info->regs + IMX7D_EACH_CHANNEL_REG_OFFSET * channel +
+		     IMX7D_REG_ADC_CHANNEL_CFG2_BASE);
+
+	cfg2 |= imx7d_adc_average_num[info->adc_feature.avg_num];
+
+	/*
+	 * write the register REG_ADC_CH_A\B\C\D_CFG2, according to
+	 * the channel chosen
+	 */
+	writel(cfg2, info->regs + IMX7D_EACH_CHANNEL_REG_OFFSET * channel +
+	       IMX7D_REG_ADC_CHANNEL_CFG2_BASE);
+	writel(cfg1, info->regs + IMX7D_EACH_CHANNEL_REG_OFFSET * channel);
+}
+
+static u32 imx7d_adc_get_sample_rate(struct imx7d_adc *info)
+{
+	/* input clock is always 24MHz */
+	u32 input_clk = 24000000;
+	u32 analogue_core_clk;
+	u32 core_time_unit = info->adc_feature.core_time_unit;
+	u32 tmp;
+
+	analogue_core_clk = input_clk / info->pre_div_num;
+	tmp = (core_time_unit + 1) * 6;
+
+	return analogue_core_clk / tmp;
+}
+
+static int imx7d_adc_read_raw(struct iio_dev *indio_dev,
+			struct iio_chan_spec const *chan,
+			int *val,
+			int *val2,
+			long mask)
+{
+	struct imx7d_adc *info = iio_priv(indio_dev);
+
+	u32 channel;
+	long ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		mutex_lock(&indio_dev->mlock);
+		reinit_completion(&info->completion);
+
+		channel = chan->channel & 0x03;
+		info->channel = channel;
+		imx7d_adc_channel_set(info);
+
+		ret = wait_for_completion_interruptible_timeout
+				(&info->completion, IMX7D_ADC_TIMEOUT);
+		if (ret == 0) {
+			mutex_unlock(&indio_dev->mlock);
+			return -ETIMEDOUT;
+		}
+		if (ret < 0) {
+			mutex_unlock(&indio_dev->mlock);
+			return ret;
+		}
+
+		*val = info->value;
+		mutex_unlock(&indio_dev->mlock);
+		return IIO_VAL_INT;
+
+	case IIO_CHAN_INFO_SCALE:
+		info->vref_uv = regulator_get_voltage(info->vref);
+		*val = info->vref_uv / 1000;
+		*val2 = 12;
+		return IIO_VAL_FRACTIONAL_LOG2;
+
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		*val = imx7d_adc_get_sample_rate(info);
+		return IIO_VAL_INT;
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static int imx7d_adc_read_data(struct imx7d_adc *info)
+{
+	u32 channel;
+	u32 value;
+
+	channel = info->channel & 0x03;
+
+	/*
+	 * channel A and B conversion result share one register,
+	 * bit[27~16] is the channel B conversion result,
+	 * bit[11~0] is the channel A conversion result.
+	 * channel C and D is the same.
+	 */
+	if (channel < 2)
+		value = readl(info->regs + IMX7D_REG_ADC_CHA_B_CNV_RSLT);
+	else
+		value = readl(info->regs + IMX7D_REG_ADC_CHC_D_CNV_RSLT);
+	if (channel & 0x1)	/* channel B or D */
+		value = (value >> 16) & 0xFFF;
+	else			/* channel A or C */
+		value &= 0xFFF;
+
+	return value;
+}
+
+static irqreturn_t imx7d_adc_isr(int irq, void *dev_id)
+{
+	struct imx7d_adc *info = (struct imx7d_adc *)dev_id;
+	int status;
+
+	status = readl(info->regs + IMX7D_REG_ADC_INT_STATUS);
+	if (status & IMX7D_REG_ADC_INT_STATUS_CHANNEL_INT_STATUS) {
+		info->value = imx7d_adc_read_data(info);
+		complete(&info->completion);
+
+		/*
+		 * The register IMX7D_REG_ADC_INT_STATUS can't clear
+		 * itself after read operation, need software to write
+		 * 0 to the related bit. Here we clear the channel A/B/C/D
+		 * conversion finished flag.
+		 */
+		status &= ~IMX7D_REG_ADC_INT_STATUS_CHANNEL_INT_STATUS;
+		writel(status, info->regs + IMX7D_REG_ADC_INT_STATUS);
+	}
+
+	/*
+	 * If the channel A/B/C/D conversion timeout, report it and clear these
+	 * timeout flags.
+	 */
+	if (status & IMX7D_REG_ADC_INT_STATUS_CHANNEL_CONV_TIME_OUT) {
+		pr_err("%s: ADC got conversion time out interrupt: 0x%08x\n",
+			dev_name(info->dev), status);
+		status &= ~IMX7D_REG_ADC_INT_STATUS_CHANNEL_CONV_TIME_OUT;
+		writel(status, info->regs + IMX7D_REG_ADC_INT_STATUS);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int imx7d_adc_reg_access(struct iio_dev *indio_dev,
+			unsigned reg, unsigned writeval,
+			unsigned *readval)
+{
+	struct imx7d_adc *info = iio_priv(indio_dev);
+
+	if (!readval || reg % 4 || reg > IMX7D_REG_ADC_ADC_CFG)
+		return -EINVAL;
+
+	*readval = readl(info->regs + reg);
+
+	return 0;
+}
+
+static const struct iio_info imx7d_adc_iio_info = {
+	.driver_module = THIS_MODULE,
+	.read_raw = &imx7d_adc_read_raw,
+	.debugfs_reg_access = &imx7d_adc_reg_access,
+};
+
+static const struct of_device_id imx7d_adc_match[] = {
+	{ .compatible = "fsl,imx7d-adc", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, imx7d_adc_match);
+
+static void imx7d_adc_power_down(struct imx7d_adc *info)
+{
+	u32 adc_cfg;
+
+	adc_cfg = readl(info->regs + IMX7D_REG_ADC_ADC_CFG);
+	adc_cfg |= IMX7D_REG_ADC_ADC_CFG_ADC_CLK_DOWN |
+		   IMX7D_REG_ADC_ADC_CFG_ADC_POWER_DOWN;
+	adc_cfg &= ~IMX7D_REG_ADC_ADC_CFG_ADC_EN;
+	writel(adc_cfg, info->regs + IMX7D_REG_ADC_ADC_CFG);
+}
+
+static int imx7d_adc_probe(struct platform_device *pdev)
+{
+	struct imx7d_adc *info;
+	struct iio_dev *indio_dev;
+	struct resource *mem;
+	int irq;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*info));
+	if (!indio_dev) {
+		dev_err(&pdev->dev, "Failed allocating iio device\n");
+		return -ENOMEM;
+	}
+
+	info = iio_priv(indio_dev);
+	info->dev = &pdev->dev;
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	info->regs = devm_ioremap_resource(&pdev->dev, mem);
+	if (IS_ERR(info->regs)) {
+		ret = PTR_ERR(info->regs);
+		dev_err(&pdev->dev,
+			"Failed to remap adc memory, err = %d\n", ret);
+		return ret;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "No irq resource?\n");
+		return irq;
+	}
+
+	info->clk = devm_clk_get(&pdev->dev, "adc");
+	if (IS_ERR(info->clk)) {
+		ret = PTR_ERR(info->clk);
+		dev_err(&pdev->dev, "Failed getting clock, err = %d\n", ret);
+		return ret;
+	}
+
+	info->vref = devm_regulator_get(&pdev->dev, "vref");
+	if (IS_ERR(info->vref)) {
+		ret = PTR_ERR(info->vref);
+		dev_err(&pdev->dev,
+			"Failed getting reference voltage, err = %d\n", ret);
+		return ret;
+	}
+
+	ret = regulator_enable(info->vref);
+	if (ret) {
+		dev_err(&pdev->dev,
+			"Can't enable adc reference top voltage, err = %d\n",
+			ret);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, indio_dev);
+
+	init_completion(&info->completion);
+
+	indio_dev->name = dev_name(&pdev->dev);
+	indio_dev->dev.parent = &pdev->dev;
+	indio_dev->info = &imx7d_adc_iio_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = imx7d_adc_iio_channels;
+	indio_dev->num_channels = ARRAY_SIZE(imx7d_adc_iio_channels);
+
+	ret = clk_prepare_enable(info->clk);
+	if (ret) {
+		dev_err(&pdev->dev,
+			"Could not prepare or enable the clock.\n");
+		goto error_adc_clk_enable;
+	}
+
+	ret = devm_request_irq(info->dev, irq,
+				imx7d_adc_isr, 0,
+				dev_name(&pdev->dev), info);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Failed requesting irq, irq = %d\n", irq);
+		goto error_iio_device_register;
+	}
+
+	imx7d_adc_feature_config(info);
+	imx7d_adc_hw_init(info);
+
+	ret = iio_device_register(indio_dev);
+	if (ret) {
+		imx7d_adc_power_down(info);
+		dev_err(&pdev->dev, "Couldn't register the device.\n");
+		goto error_iio_device_register;
+	}
+
+	return 0;
+
+error_iio_device_register:
+	clk_disable_unprepare(info->clk);
+error_adc_clk_enable:
+	regulator_disable(info->vref);
+
+	return ret;
+}
+
+static int imx7d_adc_remove(struct platform_device *pdev)
+{
+	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+	struct imx7d_adc *info = iio_priv(indio_dev);
+
+	iio_device_unregister(indio_dev);
+
+	imx7d_adc_power_down(info);
+
+	clk_disable_unprepare(info->clk);
+	regulator_disable(info->vref);
+
+	return 0;
+}
+
+static int __maybe_unused imx7d_adc_suspend(struct device *dev)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct imx7d_adc *info = iio_priv(indio_dev);
+
+	imx7d_adc_power_down(info);
+
+	clk_disable_unprepare(info->clk);
+	regulator_disable(info->vref);
+
+	return 0;
+}
+
+static int __maybe_unused imx7d_adc_resume(struct device *dev)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct imx7d_adc *info = iio_priv(indio_dev);
+	int ret;
+
+	ret = regulator_enable(info->vref);
+	if (ret) {
+		dev_err(info->dev,
+			"Can't enable adc reference top voltage, err = %d\n",
+			ret);
+		return ret;
+	}
+
+	ret = clk_prepare_enable(info->clk);
+	if (ret) {
+		dev_err(info->dev,
+			"Could not prepare or enable clock.\n");
+		regulator_disable(info->vref);
+		return ret;
+	}
+
+	imx7d_adc_hw_init(info);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(imx7d_adc_pm_ops, imx7d_adc_suspend, imx7d_adc_resume);
+
+static struct platform_driver imx7d_adc_driver = {
+	.probe		= imx7d_adc_probe,
+	.remove		= imx7d_adc_remove,
+	.driver		= {
+		.name	= "imx7d_adc",
+		.of_match_table = imx7d_adc_match,
+		.pm	= &imx7d_adc_pm_ops,
+	},
+};
+
+module_platform_driver(imx7d_adc_driver);
+
+MODULE_AUTHOR("Haibo Chen <haibo.chen@freescale.com>");
+MODULE_DESCRIPTION("Freeacale IMX7D ADC driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/adc/ina2xx-adc.c b/drivers/iio/adc/ina2xx-adc.c
new file mode 100644
index 000000000..d803e5018
--- /dev/null
+++ b/drivers/iio/adc/ina2xx-adc.c
@@ -0,0 +1,745 @@
+/*
+ * INA2XX Current and Power Monitors
+ *
+ * Copyright 2015 Baylibre SAS.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Based on linux/drivers/iio/adc/ad7291.c
+ * Copyright 2010-2011 Analog Devices Inc.
+ *
+ * Based on linux/drivers/hwmon/ina2xx.c
+ * Copyright 2012 Lothar Felten <l-felten@ti.com>
+ *
+ * Licensed under the GPL-2 or later.
+ *
+ * IIO driver for INA219-220-226-230-231
+ *
+ * Configurable 7-bit I2C slave address from 0x40 to 0x4F
+ */
+#include <linux/module.h>
+#include <linux/kthread.h>
+#include <linux/delay.h>
+#include <linux/iio/kfifo_buf.h>
+#include <linux/iio/sysfs.h>
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+#include <linux/platform_data/ina2xx.h>
+
+#include <linux/util_macros.h>
+
+/* INA2XX registers definition */
+#define INA2XX_CONFIG                   0x00
+#define INA2XX_SHUNT_VOLTAGE            0x01	/* readonly */
+#define INA2XX_BUS_VOLTAGE              0x02	/* readonly */
+#define INA2XX_POWER                    0x03	/* readonly */
+#define INA2XX_CURRENT                  0x04	/* readonly */
+#define INA2XX_CALIBRATION              0x05
+
+#define INA226_ALERT_MASK		0x06
+#define INA266_CVRF			BIT(3)
+
+#define INA2XX_MAX_REGISTERS            8
+
+/* settings - depend on use case */
+#define INA219_CONFIG_DEFAULT           0x399F	/* PGA=8 */
+#define INA226_CONFIG_DEFAULT           0x4327
+#define INA226_DEFAULT_AVG              4
+#define INA226_DEFAULT_IT		1110
+
+#define INA2XX_RSHUNT_DEFAULT           10000
+
+/*
+ * bit mask for reading the averaging setting in the configuration register
+ * FIXME: use regmap_fields.
+ */
+#define INA2XX_MODE_MASK	GENMASK(3, 0)
+
+#define INA226_AVG_MASK		GENMASK(11, 9)
+#define INA226_SHIFT_AVG(val)	((val) << 9)
+
+/* Integration time for VBus */
+#define INA226_ITB_MASK		GENMASK(8, 6)
+#define INA226_SHIFT_ITB(val)	((val) << 6)
+
+/* Integration time for VShunt */
+#define INA226_ITS_MASK		GENMASK(5, 3)
+#define INA226_SHIFT_ITS(val)	((val) << 3)
+
+/* Cosmetic macro giving the sampling period for a full P=UxI cycle */
+#define SAMPLING_PERIOD(c)	((c->int_time_vbus + c->int_time_vshunt) \
+				 * c->avg)
+
+static bool ina2xx_is_writeable_reg(struct device *dev, unsigned int reg)
+{
+	return (reg == INA2XX_CONFIG) || (reg > INA2XX_CURRENT);
+}
+
+static bool ina2xx_is_volatile_reg(struct device *dev, unsigned int reg)
+{
+	return (reg != INA2XX_CONFIG);
+}
+
+static inline bool is_signed_reg(unsigned int reg)
+{
+	return (reg == INA2XX_SHUNT_VOLTAGE) || (reg == INA2XX_CURRENT);
+}
+
+static const struct regmap_config ina2xx_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 16,
+	.max_register = INA2XX_MAX_REGISTERS,
+	.writeable_reg = ina2xx_is_writeable_reg,
+	.volatile_reg = ina2xx_is_volatile_reg,
+};
+
+enum ina2xx_ids { ina219, ina226 };
+
+struct ina2xx_config {
+	u16 config_default;
+	int calibration_factor;
+	int shunt_div;
+	int bus_voltage_shift;
+	int bus_voltage_lsb;	/* uV */
+	int power_lsb;		/* uW */
+};
+
+struct ina2xx_chip_info {
+	struct regmap *regmap;
+	struct task_struct *task;
+	const struct ina2xx_config *config;
+	struct mutex state_lock;
+	unsigned int shunt_resistor;
+	int avg;
+	s64 prev_ns;	/* track buffer capture time, check for underruns*/
+	int int_time_vbus; /* Bus voltage integration time uS */
+	int int_time_vshunt; /* Shunt voltage integration time uS */
+	bool allow_async_readout;
+};
+
+static const struct ina2xx_config ina2xx_config[] = {
+	[ina219] = {
+		    .config_default = INA219_CONFIG_DEFAULT,
+		    .calibration_factor = 40960000,
+		    .shunt_div = 100,
+		    .bus_voltage_shift = 3,
+		    .bus_voltage_lsb = 4000,
+		    .power_lsb = 20000,
+		    },
+	[ina226] = {
+		    .config_default = INA226_CONFIG_DEFAULT,
+		    .calibration_factor = 5120000,
+		    .shunt_div = 400,
+		    .bus_voltage_shift = 0,
+		    .bus_voltage_lsb = 1250,
+		    .power_lsb = 25000,
+		    },
+};
+
+static int ina2xx_read_raw(struct iio_dev *indio_dev,
+			   struct iio_chan_spec const *chan,
+			   int *val, int *val2, long mask)
+{
+	int ret;
+	struct ina2xx_chip_info *chip = iio_priv(indio_dev);
+	unsigned int regval;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		ret = regmap_read(chip->regmap, chan->address, &regval);
+		if (ret < 0)
+			return ret;
+
+		if (is_signed_reg(chan->address))
+			*val = (s16) regval;
+		else
+			*val  = regval;
+
+		return IIO_VAL_INT;
+
+	case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+		*val = chip->avg;
+		return IIO_VAL_INT;
+
+	case IIO_CHAN_INFO_INT_TIME:
+		*val = 0;
+		if (chan->address == INA2XX_SHUNT_VOLTAGE)
+			*val2 = chip->int_time_vshunt;
+		else
+			*val2 = chip->int_time_vbus;
+
+		return IIO_VAL_INT_PLUS_MICRO;
+
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		/*
+		 * Sample freq is read only, it is a consequence of
+		 * 1/AVG*(CT_bus+CT_shunt).
+		 */
+		*val = DIV_ROUND_CLOSEST(1000000, SAMPLING_PERIOD(chip));
+
+		return IIO_VAL_INT;
+
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->address) {
+		case INA2XX_SHUNT_VOLTAGE:
+			/* processed (mV) = raw*1000/shunt_div */
+			*val2 = chip->config->shunt_div;
+			*val = 1000;
+			return IIO_VAL_FRACTIONAL;
+
+		case INA2XX_BUS_VOLTAGE:
+			/* processed (mV) = raw*lsb (uV) / (1000 << shift) */
+			*val = chip->config->bus_voltage_lsb;
+			*val2 = 1000 << chip->config->bus_voltage_shift;
+			return IIO_VAL_FRACTIONAL;
+
+		case INA2XX_POWER:
+			/* processed (mW) = raw*lsb (uW) / 1000 */
+			*val = chip->config->power_lsb;
+			*val2 = 1000;
+			return IIO_VAL_FRACTIONAL;
+
+		case INA2XX_CURRENT:
+			/* processed (mA) = raw (mA) */
+			*val = 1;
+			return IIO_VAL_INT;
+		}
+	}
+
+	return -EINVAL;
+}
+
+/*
+ * Available averaging rates for ina226. The indices correspond with
+ * the bit values expected by the chip (according to the ina226 datasheet,
+ * table 3 AVG bit settings, found at
+ * http://www.ti.com/lit/ds/symlink/ina226.pdf.
+ */
+static const int ina226_avg_tab[] = { 1, 4, 16, 64, 128, 256, 512, 1024 };
+
+static int ina226_set_average(struct ina2xx_chip_info *chip, unsigned int val,
+			      unsigned int *config)
+{
+	int bits;
+
+	if (val > 1024 || val < 1)
+		return -EINVAL;
+
+	bits = find_closest(val, ina226_avg_tab,
+			    ARRAY_SIZE(ina226_avg_tab));
+
+	chip->avg = ina226_avg_tab[bits];
+
+	*config &= ~INA226_AVG_MASK;
+	*config |= INA226_SHIFT_AVG(bits) & INA226_AVG_MASK;
+
+	return 0;
+}
+
+/* Conversion times in uS */
+static const int ina226_conv_time_tab[] = { 140, 204, 332, 588, 1100,
+					    2116, 4156, 8244 };
+
+static int ina226_set_int_time_vbus(struct ina2xx_chip_info *chip,
+				    unsigned int val_us, unsigned int *config)
+{
+	int bits;
+
+	if (val_us > 8244 || val_us < 140)
+		return -EINVAL;
+
+	bits = find_closest(val_us, ina226_conv_time_tab,
+			ARRAY_SIZE(ina226_conv_time_tab));
+
+	chip->int_time_vbus = ina226_conv_time_tab[bits];
+
+	*config &= ~INA226_ITB_MASK;
+	*config |= INA226_SHIFT_ITB(bits) & INA226_ITB_MASK;
+
+	return 0;
+}
+
+static int ina226_set_int_time_vshunt(struct ina2xx_chip_info *chip,
+				      unsigned int val_us, unsigned int *config)
+{
+	int bits;
+
+	if (val_us > 8244 || val_us < 140)
+		return -EINVAL;
+
+	bits = find_closest(val_us, ina226_conv_time_tab,
+			ARRAY_SIZE(ina226_conv_time_tab));
+
+	chip->int_time_vshunt = ina226_conv_time_tab[bits];
+
+	*config &= ~INA226_ITS_MASK;
+	*config |= INA226_SHIFT_ITS(bits) & INA226_ITS_MASK;
+
+	return 0;
+}
+
+static int ina2xx_write_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan,
+			    int val, int val2, long mask)
+{
+	struct ina2xx_chip_info *chip = iio_priv(indio_dev);
+	int ret;
+	unsigned int config, tmp;
+
+	if (iio_buffer_enabled(indio_dev))
+		return -EBUSY;
+
+	mutex_lock(&chip->state_lock);
+
+	ret = regmap_read(chip->regmap, INA2XX_CONFIG, &config);
+	if (ret < 0)
+		goto _err;
+
+	tmp = config;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+		ret = ina226_set_average(chip, val, &tmp);
+		break;
+
+	case IIO_CHAN_INFO_INT_TIME:
+		if (chan->address == INA2XX_SHUNT_VOLTAGE)
+			ret = ina226_set_int_time_vshunt(chip, val2, &tmp);
+		else
+			ret = ina226_set_int_time_vbus(chip, val2, &tmp);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	if (!ret && (tmp != config))
+		ret = regmap_write(chip->regmap, INA2XX_CONFIG, tmp);
+_err:
+	mutex_unlock(&chip->state_lock);
+
+	return ret;
+}
+
+
+static ssize_t ina2xx_allow_async_readout_show(struct device *dev,
+					   struct device_attribute *attr,
+					   char *buf)
+{
+	struct ina2xx_chip_info *chip = iio_priv(dev_to_iio_dev(dev));
+
+	return sprintf(buf, "%d\n", chip->allow_async_readout);
+}
+
+static ssize_t ina2xx_allow_async_readout_store(struct device *dev,
+				struct device_attribute *attr,
+				const char *buf, size_t len)
+{
+	struct ina2xx_chip_info *chip = iio_priv(dev_to_iio_dev(dev));
+	bool val;
+	int ret;
+
+	ret = strtobool((const char *) buf, &val);
+	if (ret)
+		return ret;
+
+	chip->allow_async_readout = val;
+
+	return len;
+}
+
+static int set_shunt_resistor(struct ina2xx_chip_info *chip, unsigned int val)
+{
+	if (val <= 0 || val > chip->config->calibration_factor)
+		return -EINVAL;
+
+	chip->shunt_resistor = val;
+	return 0;
+}
+
+static ssize_t ina2xx_shunt_resistor_show(struct device *dev,
+					  struct device_attribute *attr,
+					  char *buf)
+{
+	struct ina2xx_chip_info *chip = iio_priv(dev_to_iio_dev(dev));
+
+	return sprintf(buf, "%d\n", chip->shunt_resistor);
+}
+
+static ssize_t ina2xx_shunt_resistor_store(struct device *dev,
+					   struct device_attribute *attr,
+					   const char *buf, size_t len)
+{
+	struct ina2xx_chip_info *chip = iio_priv(dev_to_iio_dev(dev));
+	unsigned long val;
+	int ret;
+
+	ret = kstrtoul((const char *) buf, 10, &val);
+	if (ret)
+		return ret;
+
+	ret = set_shunt_resistor(chip, val);
+	if (ret)
+		return ret;
+
+	return len;
+}
+
+#define INA2XX_CHAN(_type, _index, _address) { \
+	.type = (_type), \
+	.address = (_address), \
+	.indexed = 1, \
+	.channel = (_index), \
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) \
+	| BIT(IIO_CHAN_INFO_SCALE), \
+	.info_mask_shared_by_dir = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \
+				   BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \
+	.scan_index = (_index), \
+	.scan_type = { \
+		.sign = 'u', \
+		.realbits = 16, \
+		.storagebits = 16, \
+		.endianness = IIO_CPU, \
+	} \
+}
+
+/*
+ * Sampling Freq is a consequence of the integration times of
+ * the Voltage channels.
+ */
+#define INA2XX_CHAN_VOLTAGE(_index, _address) { \
+	.type = IIO_VOLTAGE, \
+	.address = (_address), \
+	.indexed = 1, \
+	.channel = (_index), \
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
+			      BIT(IIO_CHAN_INFO_SCALE) | \
+			      BIT(IIO_CHAN_INFO_INT_TIME), \
+	.scan_index = (_index), \
+	.scan_type = { \
+		.sign = 'u', \
+		.realbits = 16, \
+		.storagebits = 16, \
+		.endianness = IIO_LE, \
+	} \
+}
+
+static const struct iio_chan_spec ina2xx_channels[] = {
+	INA2XX_CHAN_VOLTAGE(0, INA2XX_SHUNT_VOLTAGE),
+	INA2XX_CHAN_VOLTAGE(1, INA2XX_BUS_VOLTAGE),
+	INA2XX_CHAN(IIO_POWER, 2, INA2XX_POWER),
+	INA2XX_CHAN(IIO_CURRENT, 3, INA2XX_CURRENT),
+	IIO_CHAN_SOFT_TIMESTAMP(4),
+};
+
+static int ina2xx_work_buffer(struct iio_dev *indio_dev)
+{
+	struct ina2xx_chip_info *chip = iio_priv(indio_dev);
+	unsigned short data[8];
+	int bit, ret, i = 0;
+	unsigned long buffer_us, elapsed_us;
+	s64 time_a, time_b;
+	unsigned int alert;
+
+	time_a = iio_get_time_ns();
+
+	/*
+	 * Because the timer thread and the chip conversion clock
+	 * are asynchronous, the period difference will eventually
+	 * result in reading V[k-1] again, or skip V[k] at time Tk.
+	 * In order to resync the timer with the conversion process
+	 * we check the ConVersionReadyFlag.
+	 * On hardware that supports using the ALERT pin to toggle a
+	 * GPIO a triggered buffer could be used instead.
+	 * For now, we pay for that extra read of the ALERT register
+	 */
+	if (!chip->allow_async_readout)
+		do {
+			ret = regmap_read(chip->regmap, INA226_ALERT_MASK,
+					  &alert);
+			if (ret < 0)
+				return ret;
+
+			alert &= INA266_CVRF;
+			trace_printk("Conversion ready: %d\n", !!alert);
+
+		} while (!alert);
+
+	/*
+	 * Single register reads: bulk_read will not work with ina226
+	 * as there is no auto-increment of the address register for
+	 * data length longer than 16bits.
+	 */
+	for_each_set_bit(bit, indio_dev->active_scan_mask,
+			 indio_dev->masklength) {
+		unsigned int val;
+
+		ret = regmap_read(chip->regmap,
+				  INA2XX_SHUNT_VOLTAGE + bit, &val);
+		if (ret < 0)
+			return ret;
+
+		data[i++] = val;
+	}
+
+	time_b = iio_get_time_ns();
+
+	iio_push_to_buffers_with_timestamp(indio_dev,
+					   (unsigned int *)data, time_a);
+
+	buffer_us = (unsigned long)(time_b - time_a) / 1000;
+	elapsed_us = (unsigned long)(time_a - chip->prev_ns) / 1000;
+
+	trace_printk("uS: elapsed: %lu, buf: %lu\n", elapsed_us, buffer_us);
+
+	chip->prev_ns = time_a;
+
+	return buffer_us;
+};
+
+static int ina2xx_capture_thread(void *data)
+{
+	struct iio_dev *indio_dev = (struct iio_dev *)data;
+	struct ina2xx_chip_info *chip = iio_priv(indio_dev);
+	unsigned int sampling_us = SAMPLING_PERIOD(chip);
+	int buffer_us;
+
+	/*
+	 * Poll a bit faster than the chip internal Fs, in case
+	 * we wish to sync with the conversion ready flag.
+	 */
+	if (!chip->allow_async_readout)
+		sampling_us -= 200;
+
+	do {
+		buffer_us = ina2xx_work_buffer(indio_dev);
+		if (buffer_us < 0)
+			return buffer_us;
+
+		if (sampling_us > buffer_us)
+			udelay(sampling_us - buffer_us);
+
+	} while (!kthread_should_stop());
+
+	return 0;
+}
+
+static int ina2xx_buffer_enable(struct iio_dev *indio_dev)
+{
+	struct ina2xx_chip_info *chip = iio_priv(indio_dev);
+	unsigned int sampling_us = SAMPLING_PERIOD(chip);
+
+	trace_printk("Enabling buffer w/ scan_mask %02x, freq = %d, avg =%u\n",
+		     (unsigned int)(*indio_dev->active_scan_mask),
+		     1000000/sampling_us, chip->avg);
+
+	trace_printk("Expected work period: %u us\n", sampling_us);
+	trace_printk("Async readout mode: %d\n", chip->allow_async_readout);
+
+	chip->prev_ns = iio_get_time_ns();
+
+	chip->task = kthread_run(ina2xx_capture_thread, (void *)indio_dev,
+				 "%s:%d-%uus", indio_dev->name, indio_dev->id,
+				 sampling_us);
+
+	return PTR_ERR_OR_ZERO(chip->task);
+}
+
+static int ina2xx_buffer_disable(struct iio_dev *indio_dev)
+{
+	struct ina2xx_chip_info *chip = iio_priv(indio_dev);
+
+	if (chip->task) {
+		kthread_stop(chip->task);
+		chip->task = NULL;
+	}
+
+	return 0;
+}
+
+static const struct iio_buffer_setup_ops ina2xx_setup_ops = {
+	.postenable = &ina2xx_buffer_enable,
+	.predisable = &ina2xx_buffer_disable,
+};
+
+static int ina2xx_debug_reg(struct iio_dev *indio_dev,
+			    unsigned reg, unsigned writeval, unsigned *readval)
+{
+	struct ina2xx_chip_info *chip = iio_priv(indio_dev);
+
+	if (!readval)
+		return regmap_write(chip->regmap, reg, writeval);
+
+	return regmap_read(chip->regmap, reg, readval);
+}
+
+/* Possible integration times for vshunt and vbus */
+static IIO_CONST_ATTR_INT_TIME_AVAIL \
+ ("0.000140 0.000204 0.000332 0.000588 0.001100 0.002116 0.004156 0.008244");
+
+static IIO_DEVICE_ATTR(in_allow_async_readout, S_IRUGO | S_IWUSR,
+		       ina2xx_allow_async_readout_show,
+		       ina2xx_allow_async_readout_store, 0);
+
+static IIO_DEVICE_ATTR(in_shunt_resistor, S_IRUGO | S_IWUSR,
+		       ina2xx_shunt_resistor_show,
+		       ina2xx_shunt_resistor_store, 0);
+
+static struct attribute *ina2xx_attributes[] = {
+	&iio_dev_attr_in_allow_async_readout.dev_attr.attr,
+	&iio_const_attr_integration_time_available.dev_attr.attr,
+	&iio_dev_attr_in_shunt_resistor.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group ina2xx_attribute_group = {
+	.attrs = ina2xx_attributes,
+};
+
+static const struct iio_info ina2xx_info = {
+	.debugfs_reg_access = &ina2xx_debug_reg,
+	.read_raw = &ina2xx_read_raw,
+	.write_raw = &ina2xx_write_raw,
+	.attrs = &ina2xx_attribute_group,
+	.driver_module = THIS_MODULE,
+};
+
+/* Initialize the configuration and calibration registers. */
+static int ina2xx_init(struct ina2xx_chip_info *chip, unsigned int config)
+{
+	u16 regval;
+	int ret = regmap_write(chip->regmap, INA2XX_CONFIG, config);
+
+	if (ret < 0)
+		return ret;
+	/*
+	 * Set current LSB to 1mA, shunt is in uOhms
+	 * (equation 13 in datasheet). We hardcode a Current_LSB
+	 * of 1.0 x10-6. The only remaining parameter is RShunt.
+	 * There is no need to expose the CALIBRATION register
+	 * to the user for now.
+	 */
+	regval = DIV_ROUND_CLOSEST(chip->config->calibration_factor,
+			    chip->shunt_resistor);
+
+	return regmap_write(chip->regmap, INA2XX_CALIBRATION, regval);
+}
+
+static int ina2xx_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct ina2xx_chip_info *chip;
+	struct iio_dev *indio_dev;
+	struct iio_buffer *buffer;
+	int ret;
+	unsigned int val;
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*chip));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	chip = iio_priv(indio_dev);
+
+	chip->config = &ina2xx_config[id->driver_data];
+
+	if (of_property_read_u32(client->dev.of_node,
+				 "shunt-resistor", &val) < 0) {
+		struct ina2xx_platform_data *pdata =
+		    dev_get_platdata(&client->dev);
+
+		if (pdata)
+			val = pdata->shunt_uohms;
+		else
+			val = INA2XX_RSHUNT_DEFAULT;
+	}
+
+	ret = set_shunt_resistor(chip, val);
+	if (ret)
+		return ret;
+
+	mutex_init(&chip->state_lock);
+
+	/* This is only used for device removal purposes. */
+	i2c_set_clientdata(client, indio_dev);
+
+	indio_dev->name = id->name;
+	indio_dev->channels = ina2xx_channels;
+	indio_dev->num_channels = ARRAY_SIZE(ina2xx_channels);
+
+	indio_dev->dev.parent = &client->dev;
+	indio_dev->info = &ina2xx_info;
+	indio_dev->modes = INDIO_DIRECT_MODE | INDIO_BUFFER_SOFTWARE;
+
+	chip->regmap = devm_regmap_init_i2c(client, &ina2xx_regmap_config);
+	if (IS_ERR(chip->regmap)) {
+		dev_err(&client->dev, "failed to allocate register map\n");
+		return PTR_ERR(chip->regmap);
+	}
+
+	/* Patch the current config register with default. */
+	val = chip->config->config_default;
+
+	if (id->driver_data == ina226) {
+		ina226_set_average(chip, INA226_DEFAULT_AVG, &val);
+		ina226_set_int_time_vbus(chip, INA226_DEFAULT_IT, &val);
+		ina226_set_int_time_vshunt(chip, INA226_DEFAULT_IT, &val);
+	}
+
+	ret = ina2xx_init(chip, val);
+	if (ret < 0) {
+		dev_err(&client->dev, "error configuring the device: %d\n",
+			ret);
+		return -ENODEV;
+	}
+
+	buffer = devm_iio_kfifo_allocate(&indio_dev->dev);
+	if (!buffer)
+		return -ENOMEM;
+
+	indio_dev->setup_ops = &ina2xx_setup_ops;
+
+	iio_device_attach_buffer(indio_dev, buffer);
+
+	return iio_device_register(indio_dev);
+}
+
+
+static int ina2xx_remove(struct i2c_client *client)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(client);
+	struct ina2xx_chip_info *chip = iio_priv(indio_dev);
+
+	iio_device_unregister(indio_dev);
+
+	/* Powerdown */
+	return regmap_update_bits(chip->regmap, INA2XX_CONFIG,
+				  INA2XX_MODE_MASK, 0);
+}
+
+
+static const struct i2c_device_id ina2xx_id[] = {
+	{"ina219", ina219},
+	{"ina220", ina219},
+	{"ina226", ina226},
+	{"ina230", ina226},
+	{"ina231", ina226},
+	{}
+};
+
+MODULE_DEVICE_TABLE(i2c, ina2xx_id);
+
+static struct i2c_driver ina2xx_driver = {
+	.driver = {
+		   .name = KBUILD_MODNAME,
+	},
+	.probe = ina2xx_probe,
+	.remove = ina2xx_remove,
+	.id_table = ina2xx_id,
+};
+
+module_i2c_driver(ina2xx_driver);
+
+MODULE_AUTHOR("Marc Titinger <marc.titinger@baylibre.com>");
+MODULE_DESCRIPTION("Texas Instruments INA2XX ADC driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/adc/mcp320x.c b/drivers/iio/adc/mcp320x.c
index 8569c8e1f..d1c05f6ee 100644
--- a/drivers/iio/adc/mcp320x.c
+++ b/drivers/iio/adc/mcp320x.c
@@ -354,6 +354,7 @@ static int mcp320x_remove(struct spi_device *spi)
 
 #if defined(CONFIG_OF)
 static const struct of_device_id mcp320x_dt_ids[] = {
+	/* NOTE: The use of compatibles with no vendor prefix is deprecated. */
 	{
 		.compatible = "mcp3001",
 		.data = &mcp320x_chip_infos[mcp3001],
@@ -382,6 +383,33 @@ static const struct of_device_id mcp320x_dt_ids[] = {
 		.compatible = "mcp3301",
 		.data = &mcp320x_chip_infos[mcp3301],
 	}, {
+		.compatible = "microchip,mcp3001",
+		.data = &mcp320x_chip_infos[mcp3001],
+	}, {
+		.compatible = "microchip,mcp3002",
+		.data = &mcp320x_chip_infos[mcp3002],
+	}, {
+		.compatible = "microchip,mcp3004",
+		.data = &mcp320x_chip_infos[mcp3004],
+	}, {
+		.compatible = "microchip,mcp3008",
+		.data = &mcp320x_chip_infos[mcp3008],
+	}, {
+		.compatible = "microchip,mcp3201",
+		.data = &mcp320x_chip_infos[mcp3201],
+	}, {
+		.compatible = "microchip,mcp3202",
+		.data = &mcp320x_chip_infos[mcp3202],
+	}, {
+		.compatible = "microchip,mcp3204",
+		.data = &mcp320x_chip_infos[mcp3204],
+	}, {
+		.compatible = "microchip,mcp3208",
+		.data = &mcp320x_chip_infos[mcp3208],
+	}, {
+		.compatible = "microchip,mcp3301",
+		.data = &mcp320x_chip_infos[mcp3301],
+	}, {
 	}
 };
 MODULE_DEVICE_TABLE(of, mcp320x_dt_ids);
diff --git a/drivers/iio/adc/mcp3422.c b/drivers/iio/adc/mcp3422.c
index 355512200..6eca7aea8 100644
--- a/drivers/iio/adc/mcp3422.c
+++ b/drivers/iio/adc/mcp3422.c
@@ -305,6 +305,10 @@ static const struct attribute_group mcp3422_attribute_group = {
 	.attrs = mcp3422_attributes,
 };
 
+static const struct iio_chan_spec mcp3421_channels[] = {
+	MCP3422_CHAN(0),
+};
+
 static const struct iio_chan_spec mcp3422_channels[] = {
 	MCP3422_CHAN(0),
 	MCP3422_CHAN(1),
@@ -352,6 +356,10 @@ static int mcp3422_probe(struct i2c_client *client,
 	indio_dev->info = &mcp3422_info;
 
 	switch (adc->id) {
+	case 1:
+		indio_dev->channels = mcp3421_channels;
+		indio_dev->num_channels = ARRAY_SIZE(mcp3421_channels);
+		break;
 	case 2:
 	case 3:
 	case 6:
@@ -383,6 +391,7 @@ static int mcp3422_probe(struct i2c_client *client,
 }
 
 static const struct i2c_device_id mcp3422_id[] = {
+	{ "mcp3421", 1 },
 	{ "mcp3422", 2 },
 	{ "mcp3423", 3 },
 	{ "mcp3424", 4 },
diff --git a/drivers/iio/adc/palmas_gpadc.c b/drivers/iio/adc/palmas_gpadc.c
new file mode 100644
index 000000000..f42eb8a7d
--- /dev/null
+++ b/drivers/iio/adc/palmas_gpadc.c
@@ -0,0 +1,859 @@
+/*
+ * palmas-adc.c -- TI PALMAS GPADC.
+ *
+ * Copyright (c) 2013, NVIDIA Corporation. All rights reserved.
+ *
+ * Author: Pradeep Goudagunta <pgoudagunta@nvidia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ */
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/pm.h>
+#include <linux/mfd/palmas.h>
+#include <linux/completion.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/machine.h>
+#include <linux/iio/driver.h>
+
+#define MOD_NAME "palmas-gpadc"
+#define PALMAS_ADC_CONVERSION_TIMEOUT	(msecs_to_jiffies(5000))
+#define PALMAS_TO_BE_CALCULATED 0
+#define PALMAS_GPADC_TRIMINVALID	-1
+
+struct palmas_gpadc_info {
+/* calibration codes and regs */
+	int x1;	/* lower ideal code */
+	int x2;	/* higher ideal code */
+	int v1;	/* expected lower volt reading */
+	int v2;	/* expected higher volt reading */
+	u8 trim1_reg;	/* register number for lower trim */
+	u8 trim2_reg;	/* register number for upper trim */
+	int gain;	/* calculated from above (after reading trim regs) */
+	int offset;	/* calculated from above (after reading trim regs) */
+	int gain_error;	/* calculated from above (after reading trim regs) */
+	bool is_uncalibrated;	/* if channel has calibration data */
+};
+
+#define PALMAS_ADC_INFO(_chan, _x1, _x2, _v1, _v2, _t1, _t2, _is_uncalibrated) \
+	[PALMAS_ADC_CH_##_chan] = { \
+		.x1 = _x1, \
+		.x2 = _x2, \
+		.v1 = _v1, \
+		.v2 = _v2, \
+		.gain = PALMAS_TO_BE_CALCULATED, \
+		.offset = PALMAS_TO_BE_CALCULATED, \
+		.gain_error = PALMAS_TO_BE_CALCULATED, \
+		.trim1_reg = PALMAS_GPADC_TRIM##_t1, \
+		.trim2_reg = PALMAS_GPADC_TRIM##_t2,  \
+		.is_uncalibrated = _is_uncalibrated \
+	}
+
+static struct palmas_gpadc_info palmas_gpadc_info[] = {
+	PALMAS_ADC_INFO(IN0, 2064, 3112, 630, 950, 1, 2, false),
+	PALMAS_ADC_INFO(IN1, 2064, 3112, 630, 950, 1, 2, false),
+	PALMAS_ADC_INFO(IN2, 2064, 3112, 1260, 1900, 3, 4, false),
+	PALMAS_ADC_INFO(IN3, 2064, 3112, 630, 950, 1, 2, false),
+	PALMAS_ADC_INFO(IN4, 2064, 3112, 630, 950, 1, 2, false),
+	PALMAS_ADC_INFO(IN5, 2064, 3112, 630, 950, 1, 2, false),
+	PALMAS_ADC_INFO(IN6, 2064, 3112, 2520, 3800, 5, 6, false),
+	PALMAS_ADC_INFO(IN7, 2064, 3112, 2520, 3800, 7, 8, false),
+	PALMAS_ADC_INFO(IN8, 2064, 3112, 3150, 4750, 9, 10, false),
+	PALMAS_ADC_INFO(IN9, 2064, 3112, 5670, 8550, 11, 12, false),
+	PALMAS_ADC_INFO(IN10, 2064, 3112, 3465, 5225, 13, 14, false),
+	PALMAS_ADC_INFO(IN11, 0, 0, 0, 0, INVALID, INVALID, true),
+	PALMAS_ADC_INFO(IN12, 0, 0, 0, 0, INVALID, INVALID, true),
+	PALMAS_ADC_INFO(IN13, 0, 0, 0, 0, INVALID, INVALID, true),
+	PALMAS_ADC_INFO(IN14, 2064, 3112, 3645, 5225, 15, 16, false),
+	PALMAS_ADC_INFO(IN15, 0, 0, 0, 0, INVALID, INVALID, true),
+};
+
+/**
+ * struct palmas_gpadc - the palmas_gpadc structure
+ * @ch0_current:	channel 0 current source setting
+ *			0: 0 uA
+ *			1: 5 uA
+ *			2: 15 uA
+ *			3: 20 uA
+ * @ch3_current:	channel 0 current source setting
+ *			0: 0 uA
+ *			1: 10 uA
+ *			2: 400 uA
+ *			3: 800 uA
+ * @extended_delay:	enable the gpadc extended delay mode
+ * @auto_conversion_period:	define the auto_conversion_period
+ *
+ * This is the palmas_gpadc structure to store run-time information
+ * and pointers for this driver instance.
+ */
+
+struct palmas_gpadc {
+	struct device			*dev;
+	struct palmas			*palmas;
+	u8				ch0_current;
+	u8				ch3_current;
+	bool				extended_delay;
+	int				irq;
+	int				irq_auto_0;
+	int				irq_auto_1;
+	struct palmas_gpadc_info	*adc_info;
+	struct completion		conv_completion;
+	struct palmas_adc_wakeup_property wakeup1_data;
+	struct palmas_adc_wakeup_property wakeup2_data;
+	bool				wakeup1_enable;
+	bool				wakeup2_enable;
+	int				auto_conversion_period;
+};
+
+/*
+ * GPADC lock issue in AUTO mode.
+ * Impact: In AUTO mode, GPADC conversion can be locked after disabling AUTO
+ *	   mode feature.
+ * Details:
+ *	When the AUTO mode is the only conversion mode enabled, if the AUTO
+ *	mode feature is disabled with bit GPADC_AUTO_CTRL.  AUTO_CONV1_EN = 0
+ *	or bit GPADC_AUTO_CTRL.  AUTO_CONV0_EN = 0 during a conversion, the
+ *	conversion mechanism can be seen as locked meaning that all following
+ *	conversion will give 0 as a result.  Bit GPADC_STATUS.GPADC_AVAILABLE
+ *	will stay at 0 meaning that GPADC is busy.  An RT conversion can unlock
+ *	the GPADC.
+ *
+ * Workaround(s):
+ *	To avoid the lock mechanism, the workaround to follow before any stop
+ *	conversion request is:
+ *	Force the GPADC state machine to be ON by using the GPADC_CTRL1.
+ *		GPADC_FORCE bit = 1
+ *	Shutdown the GPADC AUTO conversion using
+ *		GPADC_AUTO_CTRL.SHUTDOWN_CONV[01] = 0.
+ *	After 100us, force the GPADC state machine to be OFF by using the
+ *		GPADC_CTRL1.  GPADC_FORCE bit = 0
+ */
+
+static int palmas_disable_auto_conversion(struct palmas_gpadc *adc)
+{
+	int ret;
+
+	ret = palmas_update_bits(adc->palmas, PALMAS_GPADC_BASE,
+			PALMAS_GPADC_CTRL1,
+			PALMAS_GPADC_CTRL1_GPADC_FORCE,
+			PALMAS_GPADC_CTRL1_GPADC_FORCE);
+	if (ret < 0) {
+		dev_err(adc->dev, "GPADC_CTRL1 update failed: %d\n", ret);
+		return ret;
+	}
+
+	ret = palmas_update_bits(adc->palmas, PALMAS_GPADC_BASE,
+			PALMAS_GPADC_AUTO_CTRL,
+			PALMAS_GPADC_AUTO_CTRL_SHUTDOWN_CONV1 |
+			PALMAS_GPADC_AUTO_CTRL_SHUTDOWN_CONV0,
+			0);
+	if (ret < 0) {
+		dev_err(adc->dev, "AUTO_CTRL update failed: %d\n", ret);
+		return ret;
+	}
+
+	udelay(100);
+
+	ret = palmas_update_bits(adc->palmas, PALMAS_GPADC_BASE,
+			PALMAS_GPADC_CTRL1,
+			PALMAS_GPADC_CTRL1_GPADC_FORCE, 0);
+	if (ret < 0)
+		dev_err(adc->dev, "GPADC_CTRL1 update failed: %d\n", ret);
+
+	return ret;
+}
+
+static irqreturn_t palmas_gpadc_irq(int irq, void *data)
+{
+	struct palmas_gpadc *adc = data;
+
+	complete(&adc->conv_completion);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t palmas_gpadc_irq_auto(int irq, void *data)
+{
+	struct palmas_gpadc *adc = data;
+
+	dev_dbg(adc->dev, "Threshold interrupt %d occurs\n", irq);
+	palmas_disable_auto_conversion(adc);
+
+	return IRQ_HANDLED;
+}
+
+static int palmas_gpadc_start_mask_interrupt(struct palmas_gpadc *adc,
+						bool mask)
+{
+	int ret;
+
+	if (!mask)
+		ret = palmas_update_bits(adc->palmas, PALMAS_INTERRUPT_BASE,
+					PALMAS_INT3_MASK,
+					PALMAS_INT3_MASK_GPADC_EOC_SW, 0);
+	else
+		ret = palmas_update_bits(adc->palmas, PALMAS_INTERRUPT_BASE,
+					PALMAS_INT3_MASK,
+					PALMAS_INT3_MASK_GPADC_EOC_SW,
+					PALMAS_INT3_MASK_GPADC_EOC_SW);
+	if (ret < 0)
+		dev_err(adc->dev, "GPADC INT MASK update failed: %d\n", ret);
+
+	return ret;
+}
+
+static int palmas_gpadc_enable(struct palmas_gpadc *adc, int adc_chan,
+			       int enable)
+{
+	unsigned int mask, val;
+	int ret;
+
+	if (enable) {
+		val = (adc->extended_delay
+			<< PALMAS_GPADC_RT_CTRL_EXTEND_DELAY_SHIFT);
+		ret = palmas_update_bits(adc->palmas, PALMAS_GPADC_BASE,
+					PALMAS_GPADC_RT_CTRL,
+					PALMAS_GPADC_RT_CTRL_EXTEND_DELAY, val);
+		if (ret < 0) {
+			dev_err(adc->dev, "RT_CTRL update failed: %d\n", ret);
+			return ret;
+		}
+
+		mask = (PALMAS_GPADC_CTRL1_CURRENT_SRC_CH0_MASK |
+			PALMAS_GPADC_CTRL1_CURRENT_SRC_CH3_MASK |
+			PALMAS_GPADC_CTRL1_GPADC_FORCE);
+		val = (adc->ch0_current
+			<< PALMAS_GPADC_CTRL1_CURRENT_SRC_CH0_SHIFT);
+		val |= (adc->ch3_current
+			<< PALMAS_GPADC_CTRL1_CURRENT_SRC_CH3_SHIFT);
+		val |= PALMAS_GPADC_CTRL1_GPADC_FORCE;
+		ret = palmas_update_bits(adc->palmas, PALMAS_GPADC_BASE,
+				PALMAS_GPADC_CTRL1, mask, val);
+		if (ret < 0) {
+			dev_err(adc->dev,
+				"Failed to update current setting: %d\n", ret);
+			return ret;
+		}
+
+		mask = (PALMAS_GPADC_SW_SELECT_SW_CONV0_SEL_MASK |
+			PALMAS_GPADC_SW_SELECT_SW_CONV_EN);
+		val = (adc_chan | PALMAS_GPADC_SW_SELECT_SW_CONV_EN);
+		ret = palmas_update_bits(adc->palmas, PALMAS_GPADC_BASE,
+				PALMAS_GPADC_SW_SELECT, mask, val);
+		if (ret < 0) {
+			dev_err(adc->dev, "SW_SELECT update failed: %d\n", ret);
+			return ret;
+		}
+	} else {
+		ret = palmas_write(adc->palmas, PALMAS_GPADC_BASE,
+				PALMAS_GPADC_SW_SELECT, 0);
+		if (ret < 0)
+			dev_err(adc->dev, "SW_SELECT write failed: %d\n", ret);
+
+		ret = palmas_update_bits(adc->palmas, PALMAS_GPADC_BASE,
+				PALMAS_GPADC_CTRL1,
+				PALMAS_GPADC_CTRL1_GPADC_FORCE, 0);
+		if (ret < 0) {
+			dev_err(adc->dev, "CTRL1 update failed: %d\n", ret);
+			return ret;
+		}
+	}
+
+	return ret;
+}
+
+static int palmas_gpadc_read_prepare(struct palmas_gpadc *adc, int adc_chan)
+{
+	int ret;
+
+	ret = palmas_gpadc_enable(adc, adc_chan, true);
+	if (ret < 0)
+		return ret;
+
+	return palmas_gpadc_start_mask_interrupt(adc, 0);
+}
+
+static void palmas_gpadc_read_done(struct palmas_gpadc *adc, int adc_chan)
+{
+	palmas_gpadc_start_mask_interrupt(adc, 1);
+	palmas_gpadc_enable(adc, adc_chan, false);
+}
+
+static int palmas_gpadc_calibrate(struct palmas_gpadc *adc, int adc_chan)
+{
+	int k;
+	int d1;
+	int d2;
+	int ret;
+	int gain;
+	int x1 =  adc->adc_info[adc_chan].x1;
+	int x2 =  adc->adc_info[adc_chan].x2;
+	int v1 = adc->adc_info[adc_chan].v1;
+	int v2 = adc->adc_info[adc_chan].v2;
+
+	ret = palmas_read(adc->palmas, PALMAS_TRIM_GPADC_BASE,
+				adc->adc_info[adc_chan].trim1_reg, &d1);
+	if (ret < 0) {
+		dev_err(adc->dev, "TRIM read failed: %d\n", ret);
+		goto scrub;
+	}
+
+	ret = palmas_read(adc->palmas, PALMAS_TRIM_GPADC_BASE,
+				adc->adc_info[adc_chan].trim2_reg, &d2);
+	if (ret < 0) {
+		dev_err(adc->dev, "TRIM read failed: %d\n", ret);
+		goto scrub;
+	}
+
+	/* gain error calculation */
+	k = (1000 + (1000 * (d2 - d1)) / (x2 - x1));
+
+	/* gain calculation */
+	gain = ((v2 - v1) * 1000) / (x2 - x1);
+
+	adc->adc_info[adc_chan].gain_error = k;
+	adc->adc_info[adc_chan].gain = gain;
+	/* offset Calculation */
+	adc->adc_info[adc_chan].offset = (d1 * 1000) - ((k - 1000) * x1);
+
+scrub:
+	return ret;
+}
+
+static int palmas_gpadc_start_conversion(struct palmas_gpadc *adc, int adc_chan)
+{
+	unsigned int val;
+	int ret;
+
+	init_completion(&adc->conv_completion);
+	ret = palmas_update_bits(adc->palmas, PALMAS_GPADC_BASE,
+				PALMAS_GPADC_SW_SELECT,
+				PALMAS_GPADC_SW_SELECT_SW_START_CONV0,
+				PALMAS_GPADC_SW_SELECT_SW_START_CONV0);
+	if (ret < 0) {
+		dev_err(adc->dev, "SELECT_SW_START write failed: %d\n", ret);
+		return ret;
+	}
+
+	ret = wait_for_completion_timeout(&adc->conv_completion,
+				PALMAS_ADC_CONVERSION_TIMEOUT);
+	if (ret == 0) {
+		dev_err(adc->dev, "conversion not completed\n");
+		return -ETIMEDOUT;
+	}
+
+	ret = palmas_bulk_read(adc->palmas, PALMAS_GPADC_BASE,
+				PALMAS_GPADC_SW_CONV0_LSB, &val, 2);
+	if (ret < 0) {
+		dev_err(adc->dev, "SW_CONV0_LSB read failed: %d\n", ret);
+		return ret;
+	}
+
+	ret = val & 0xFFF;
+
+	return ret;
+}
+
+static int palmas_gpadc_get_calibrated_code(struct palmas_gpadc *adc,
+						int adc_chan, int val)
+{
+	if (!adc->adc_info[adc_chan].is_uncalibrated)
+		val  = (val*1000 - adc->adc_info[adc_chan].offset) /
+					adc->adc_info[adc_chan].gain_error;
+
+	if (val < 0) {
+		dev_err(adc->dev, "Mismatch with calibration\n");
+		return 0;
+	}
+
+	val = (val * adc->adc_info[adc_chan].gain) / 1000;
+
+	return val;
+}
+
+static int palmas_gpadc_read_raw(struct iio_dev *indio_dev,
+	struct iio_chan_spec const *chan, int *val, int *val2, long mask)
+{
+	struct  palmas_gpadc *adc = iio_priv(indio_dev);
+	int adc_chan = chan->channel;
+	int ret = 0;
+
+	if (adc_chan > PALMAS_ADC_CH_MAX)
+		return -EINVAL;
+
+	mutex_lock(&indio_dev->mlock);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+	case IIO_CHAN_INFO_PROCESSED:
+		ret = palmas_gpadc_read_prepare(adc, adc_chan);
+		if (ret < 0)
+			goto out;
+
+		ret = palmas_gpadc_start_conversion(adc, adc_chan);
+		if (ret < 0) {
+			dev_err(adc->dev,
+			"ADC start conversion failed\n");
+			goto out;
+		}
+
+		if (mask == IIO_CHAN_INFO_PROCESSED)
+			ret = palmas_gpadc_get_calibrated_code(
+							adc, adc_chan, ret);
+
+		*val = ret;
+
+		ret = IIO_VAL_INT;
+		goto out;
+	}
+
+	mutex_unlock(&indio_dev->mlock);
+	return ret;
+
+out:
+	palmas_gpadc_read_done(adc, adc_chan);
+	mutex_unlock(&indio_dev->mlock);
+
+	return ret;
+}
+
+static const struct iio_info palmas_gpadc_iio_info = {
+	.read_raw = palmas_gpadc_read_raw,
+	.driver_module = THIS_MODULE,
+};
+
+#define PALMAS_ADC_CHAN_IIO(chan, _type, chan_info)	\
+{							\
+	.datasheet_name = PALMAS_DATASHEET_NAME(chan),	\
+	.type = _type,					\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |	\
+			BIT(chan_info),			\
+	.indexed = 1,					\
+	.channel = PALMAS_ADC_CH_##chan,		\
+}
+
+static const struct iio_chan_spec palmas_gpadc_iio_channel[] = {
+	PALMAS_ADC_CHAN_IIO(IN0, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED),
+	PALMAS_ADC_CHAN_IIO(IN1, IIO_TEMP, IIO_CHAN_INFO_RAW),
+	PALMAS_ADC_CHAN_IIO(IN2, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED),
+	PALMAS_ADC_CHAN_IIO(IN3, IIO_TEMP, IIO_CHAN_INFO_RAW),
+	PALMAS_ADC_CHAN_IIO(IN4, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED),
+	PALMAS_ADC_CHAN_IIO(IN5, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED),
+	PALMAS_ADC_CHAN_IIO(IN6, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED),
+	PALMAS_ADC_CHAN_IIO(IN7, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED),
+	PALMAS_ADC_CHAN_IIO(IN8, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED),
+	PALMAS_ADC_CHAN_IIO(IN9, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED),
+	PALMAS_ADC_CHAN_IIO(IN10, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED),
+	PALMAS_ADC_CHAN_IIO(IN11, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED),
+	PALMAS_ADC_CHAN_IIO(IN12, IIO_TEMP, IIO_CHAN_INFO_RAW),
+	PALMAS_ADC_CHAN_IIO(IN13, IIO_TEMP, IIO_CHAN_INFO_RAW),
+	PALMAS_ADC_CHAN_IIO(IN14, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED),
+	PALMAS_ADC_CHAN_IIO(IN15, IIO_VOLTAGE, IIO_CHAN_INFO_PROCESSED),
+};
+
+static int palmas_gpadc_get_adc_dt_data(struct platform_device *pdev,
+	struct palmas_gpadc_platform_data **gpadc_pdata)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct palmas_gpadc_platform_data *gp_data;
+	int ret;
+	u32 pval;
+
+	gp_data = devm_kzalloc(&pdev->dev, sizeof(*gp_data), GFP_KERNEL);
+	if (!gp_data)
+		return -ENOMEM;
+
+	ret = of_property_read_u32(np, "ti,channel0-current-microamp", &pval);
+	if (!ret)
+		gp_data->ch0_current = pval;
+
+	ret = of_property_read_u32(np, "ti,channel3-current-microamp", &pval);
+	if (!ret)
+		gp_data->ch3_current = pval;
+
+	gp_data->extended_delay = of_property_read_bool(np,
+					"ti,enable-extended-delay");
+
+	*gpadc_pdata = gp_data;
+
+	return 0;
+}
+
+static int palmas_gpadc_probe(struct platform_device *pdev)
+{
+	struct palmas_gpadc *adc;
+	struct palmas_platform_data *pdata;
+	struct palmas_gpadc_platform_data *gpadc_pdata = NULL;
+	struct iio_dev *indio_dev;
+	int ret, i;
+
+	pdata = dev_get_platdata(pdev->dev.parent);
+
+	if (pdata && pdata->gpadc_pdata)
+		gpadc_pdata = pdata->gpadc_pdata;
+
+	if (!gpadc_pdata && pdev->dev.of_node) {
+		ret = palmas_gpadc_get_adc_dt_data(pdev, &gpadc_pdata);
+		if (ret < 0)
+			return ret;
+	}
+	if (!gpadc_pdata)
+		return -EINVAL;
+
+	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*adc));
+	if (!indio_dev) {
+		dev_err(&pdev->dev, "iio_device_alloc failed\n");
+		return -ENOMEM;
+	}
+
+	adc = iio_priv(indio_dev);
+	adc->dev = &pdev->dev;
+	adc->palmas = dev_get_drvdata(pdev->dev.parent);
+	adc->adc_info = palmas_gpadc_info;
+	init_completion(&adc->conv_completion);
+	dev_set_drvdata(&pdev->dev, indio_dev);
+
+	adc->auto_conversion_period = gpadc_pdata->auto_conversion_period_ms;
+	adc->irq = palmas_irq_get_virq(adc->palmas, PALMAS_GPADC_EOC_SW_IRQ);
+	if (adc->irq < 0) {
+		dev_err(adc->dev,
+			"get virq failed: %d\n", adc->irq);
+		ret = adc->irq;
+		goto out;
+	}
+	ret = request_threaded_irq(adc->irq, NULL,
+		palmas_gpadc_irq,
+		IRQF_ONESHOT | IRQF_EARLY_RESUME, dev_name(adc->dev),
+		adc);
+	if (ret < 0) {
+		dev_err(adc->dev,
+			"request irq %d failed: %d\n", adc->irq, ret);
+		goto out;
+	}
+
+	if (gpadc_pdata->adc_wakeup1_data) {
+		memcpy(&adc->wakeup1_data, gpadc_pdata->adc_wakeup1_data,
+			sizeof(adc->wakeup1_data));
+		adc->wakeup1_enable = true;
+		adc->irq_auto_0 =  platform_get_irq(pdev, 1);
+		ret = request_threaded_irq(adc->irq_auto_0, NULL,
+				palmas_gpadc_irq_auto,
+				IRQF_ONESHOT | IRQF_EARLY_RESUME,
+				"palmas-adc-auto-0", adc);
+		if (ret < 0) {
+			dev_err(adc->dev, "request auto0 irq %d failed: %d\n",
+				adc->irq_auto_0, ret);
+			goto out_irq_free;
+		}
+	}
+
+	if (gpadc_pdata->adc_wakeup2_data) {
+		memcpy(&adc->wakeup2_data, gpadc_pdata->adc_wakeup2_data,
+				sizeof(adc->wakeup2_data));
+		adc->wakeup2_enable = true;
+		adc->irq_auto_1 =  platform_get_irq(pdev, 2);
+		ret = request_threaded_irq(adc->irq_auto_1, NULL,
+				palmas_gpadc_irq_auto,
+				IRQF_ONESHOT | IRQF_EARLY_RESUME,
+				"palmas-adc-auto-1", adc);
+		if (ret < 0) {
+			dev_err(adc->dev, "request auto1 irq %d failed: %d\n",
+				adc->irq_auto_1, ret);
+			goto out_irq_auto0_free;
+		}
+	}
+
+	/* set the current source 0 (value 0/5/15/20 uA => 0..3) */
+	if (gpadc_pdata->ch0_current <= 1)
+		adc->ch0_current = PALMAS_ADC_CH0_CURRENT_SRC_0;
+	else if (gpadc_pdata->ch0_current <= 5)
+		adc->ch0_current = PALMAS_ADC_CH0_CURRENT_SRC_5;
+	else if (gpadc_pdata->ch0_current <= 15)
+		adc->ch0_current = PALMAS_ADC_CH0_CURRENT_SRC_15;
+	else
+		adc->ch0_current = PALMAS_ADC_CH0_CURRENT_SRC_20;
+
+	/* set the current source 3 (value 0/10/400/800 uA => 0..3) */
+	if (gpadc_pdata->ch3_current <= 1)
+		adc->ch3_current = PALMAS_ADC_CH3_CURRENT_SRC_0;
+	else if (gpadc_pdata->ch3_current <= 10)
+		adc->ch3_current = PALMAS_ADC_CH3_CURRENT_SRC_10;
+	else if (gpadc_pdata->ch3_current <= 400)
+		adc->ch3_current = PALMAS_ADC_CH3_CURRENT_SRC_400;
+	else
+		adc->ch3_current = PALMAS_ADC_CH3_CURRENT_SRC_800;
+
+	adc->extended_delay = gpadc_pdata->extended_delay;
+
+	indio_dev->name = MOD_NAME;
+	indio_dev->dev.parent = &pdev->dev;
+	indio_dev->info = &palmas_gpadc_iio_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = palmas_gpadc_iio_channel;
+	indio_dev->num_channels = ARRAY_SIZE(palmas_gpadc_iio_channel);
+
+	ret = iio_device_register(indio_dev);
+	if (ret < 0) {
+		dev_err(adc->dev, "iio_device_register() failed: %d\n", ret);
+		goto out_irq_auto1_free;
+	}
+
+	device_set_wakeup_capable(&pdev->dev, 1);
+	for (i = 0; i < PALMAS_ADC_CH_MAX; i++) {
+		if (!(adc->adc_info[i].is_uncalibrated))
+			palmas_gpadc_calibrate(adc, i);
+	}
+
+	if (adc->wakeup1_enable || adc->wakeup2_enable)
+		device_wakeup_enable(&pdev->dev);
+
+	return 0;
+
+out_irq_auto1_free:
+	if (gpadc_pdata->adc_wakeup2_data)
+		free_irq(adc->irq_auto_1, adc);
+out_irq_auto0_free:
+	if (gpadc_pdata->adc_wakeup1_data)
+		free_irq(adc->irq_auto_0, adc);
+out_irq_free:
+	free_irq(adc->irq, adc);
+out:
+	return ret;
+}
+
+static int palmas_gpadc_remove(struct platform_device *pdev)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(&pdev->dev);
+	struct palmas_gpadc *adc = iio_priv(indio_dev);
+
+	if (adc->wakeup1_enable || adc->wakeup2_enable)
+		device_wakeup_disable(&pdev->dev);
+	iio_device_unregister(indio_dev);
+	free_irq(adc->irq, adc);
+	if (adc->wakeup1_enable)
+		free_irq(adc->irq_auto_0, adc);
+	if (adc->wakeup2_enable)
+		free_irq(adc->irq_auto_1, adc);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int palmas_adc_wakeup_configure(struct palmas_gpadc *adc)
+{
+	int adc_period, conv;
+	int i;
+	int ch0 = 0, ch1 = 0;
+	int thres;
+	int ret;
+
+	adc_period = adc->auto_conversion_period;
+	for (i = 0; i < 16; ++i) {
+		if (((1000 * (1 << i)) / 32) < adc_period)
+			continue;
+	}
+	if (i > 0)
+		i--;
+	adc_period = i;
+	ret = palmas_update_bits(adc->palmas, PALMAS_GPADC_BASE,
+			PALMAS_GPADC_AUTO_CTRL,
+			PALMAS_GPADC_AUTO_CTRL_COUNTER_CONV_MASK,
+			adc_period);
+	if (ret < 0) {
+		dev_err(adc->dev, "AUTO_CTRL write failed: %d\n", ret);
+		return ret;
+	}
+
+	conv = 0;
+	if (adc->wakeup1_enable) {
+		int polarity;
+
+		ch0 = adc->wakeup1_data.adc_channel_number;
+		conv |= PALMAS_GPADC_AUTO_CTRL_AUTO_CONV0_EN;
+		if (adc->wakeup1_data.adc_high_threshold > 0) {
+			thres = adc->wakeup1_data.adc_high_threshold;
+			polarity = 0;
+		} else {
+			thres = adc->wakeup1_data.adc_low_threshold;
+			polarity = PALMAS_GPADC_THRES_CONV0_MSB_THRES_CONV0_POL;
+		}
+
+		ret = palmas_write(adc->palmas, PALMAS_GPADC_BASE,
+				PALMAS_GPADC_THRES_CONV0_LSB, thres & 0xFF);
+		if (ret < 0) {
+			dev_err(adc->dev,
+				"THRES_CONV0_LSB write failed: %d\n", ret);
+			return ret;
+		}
+
+		ret = palmas_write(adc->palmas, PALMAS_GPADC_BASE,
+				PALMAS_GPADC_THRES_CONV0_MSB,
+				((thres >> 8) & 0xF) | polarity);
+		if (ret < 0) {
+			dev_err(adc->dev,
+				"THRES_CONV0_MSB write failed: %d\n", ret);
+			return ret;
+		}
+	}
+
+	if (adc->wakeup2_enable) {
+		int polarity;
+
+		ch1 = adc->wakeup2_data.adc_channel_number;
+		conv |= PALMAS_GPADC_AUTO_CTRL_AUTO_CONV1_EN;
+		if (adc->wakeup2_data.adc_high_threshold > 0) {
+			thres = adc->wakeup2_data.adc_high_threshold;
+			polarity = 0;
+		} else {
+			thres = adc->wakeup2_data.adc_low_threshold;
+			polarity = PALMAS_GPADC_THRES_CONV1_MSB_THRES_CONV1_POL;
+		}
+
+		ret = palmas_write(adc->palmas, PALMAS_GPADC_BASE,
+				PALMAS_GPADC_THRES_CONV1_LSB, thres & 0xFF);
+		if (ret < 0) {
+			dev_err(adc->dev,
+				"THRES_CONV1_LSB write failed: %d\n", ret);
+			return ret;
+		}
+
+		ret = palmas_write(adc->palmas, PALMAS_GPADC_BASE,
+				PALMAS_GPADC_THRES_CONV1_MSB,
+				((thres >> 8) & 0xF) | polarity);
+		if (ret < 0) {
+			dev_err(adc->dev,
+				"THRES_CONV1_MSB write failed: %d\n", ret);
+			return ret;
+		}
+	}
+
+	ret = palmas_write(adc->palmas, PALMAS_GPADC_BASE,
+			PALMAS_GPADC_AUTO_SELECT, (ch1 << 4) | ch0);
+	if (ret < 0) {
+		dev_err(adc->dev, "AUTO_SELECT write failed: %d\n", ret);
+		return ret;
+	}
+
+	ret = palmas_update_bits(adc->palmas, PALMAS_GPADC_BASE,
+			PALMAS_GPADC_AUTO_CTRL,
+			PALMAS_GPADC_AUTO_CTRL_AUTO_CONV1_EN |
+			PALMAS_GPADC_AUTO_CTRL_AUTO_CONV0_EN, conv);
+	if (ret < 0)
+		dev_err(adc->dev, "AUTO_CTRL write failed: %d\n", ret);
+
+	return ret;
+}
+
+static int palmas_adc_wakeup_reset(struct palmas_gpadc *adc)
+{
+	int ret;
+
+	ret = palmas_write(adc->palmas, PALMAS_GPADC_BASE,
+			PALMAS_GPADC_AUTO_SELECT, 0);
+	if (ret < 0) {
+		dev_err(adc->dev, "AUTO_SELECT write failed: %d\n", ret);
+		return ret;
+	}
+
+	ret = palmas_disable_auto_conversion(adc);
+	if (ret < 0)
+		dev_err(adc->dev, "Disable auto conversion failed: %d\n", ret);
+
+	return ret;
+}
+
+static int palmas_gpadc_suspend(struct device *dev)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct palmas_gpadc *adc = iio_priv(indio_dev);
+	int wakeup = adc->wakeup1_enable || adc->wakeup2_enable;
+	int ret;
+
+	if (!device_may_wakeup(dev) || !wakeup)
+		return 0;
+
+	ret = palmas_adc_wakeup_configure(adc);
+	if (ret < 0)
+		return ret;
+
+	if (adc->wakeup1_enable)
+		enable_irq_wake(adc->irq_auto_0);
+
+	if (adc->wakeup2_enable)
+		enable_irq_wake(adc->irq_auto_1);
+
+	return 0;
+}
+
+static int palmas_gpadc_resume(struct device *dev)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct palmas_gpadc *adc = iio_priv(indio_dev);
+	int wakeup = adc->wakeup1_enable || adc->wakeup2_enable;
+	int ret;
+
+	if (!device_may_wakeup(dev) || !wakeup)
+		return 0;
+
+	ret = palmas_adc_wakeup_reset(adc);
+	if (ret < 0)
+		return ret;
+
+	if (adc->wakeup1_enable)
+		disable_irq_wake(adc->irq_auto_0);
+
+	if (adc->wakeup2_enable)
+		disable_irq_wake(adc->irq_auto_1);
+
+	return 0;
+};
+#endif
+
+static const struct dev_pm_ops palmas_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(palmas_gpadc_suspend,
+				palmas_gpadc_resume)
+};
+
+static const struct of_device_id of_palmas_gpadc_match_tbl[] = {
+	{ .compatible = "ti,palmas-gpadc", },
+	{ /* end */ }
+};
+MODULE_DEVICE_TABLE(of, of_palmas_gpadc_match_tbl);
+
+static struct platform_driver palmas_gpadc_driver = {
+	.probe = palmas_gpadc_probe,
+	.remove = palmas_gpadc_remove,
+	.driver = {
+		.name = MOD_NAME,
+		.pm = &palmas_pm_ops,
+		.of_match_table = of_palmas_gpadc_match_tbl,
+	},
+};
+
+static int __init palmas_gpadc_init(void)
+{
+	return platform_driver_register(&palmas_gpadc_driver);
+}
+module_init(palmas_gpadc_init);
+
+static void __exit palmas_gpadc_exit(void)
+{
+	platform_driver_unregister(&palmas_gpadc_driver);
+}
+module_exit(palmas_gpadc_exit);
+
+MODULE_DESCRIPTION("palmas GPADC driver");
+MODULE_AUTHOR("Pradeep Goudagunta<pgoudagunta@nvidia.com>");
+MODULE_ALIAS("platform:palmas-gpadc");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/adc/ti-adc128s052.c b/drivers/iio/adc/ti-adc128s052.c
index ff6f7f63c..bc58867d6 100644
--- a/drivers/iio/adc/ti-adc128s052.c
+++ b/drivers/iio/adc/ti-adc128s052.c
@@ -1,10 +1,11 @@
 /*
  * Copyright (C) 2014 Angelo Compagnucci <angelo.compagnucci@gmail.com>
  *
- * Driver for Texas Instruments' ADC128S052 and ADC122S021 ADC chip.
+ * Driver for Texas Instruments' ADC128S052, ADC122S021 and ADC124S021 ADC chip.
  * Datasheets can be found here:
  * http://www.ti.com/lit/ds/symlink/adc128s052.pdf
  * http://www.ti.com/lit/ds/symlink/adc122s021.pdf
+ * http://www.ti.com/lit/ds/symlink/adc124s021.pdf
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -114,9 +115,17 @@ static const struct iio_chan_spec adc122s021_channels[] = {
 	ADC128_VOLTAGE_CHANNEL(1),
 };
 
+static const struct iio_chan_spec adc124s021_channels[] = {
+	ADC128_VOLTAGE_CHANNEL(0),
+	ADC128_VOLTAGE_CHANNEL(1),
+	ADC128_VOLTAGE_CHANNEL(2),
+	ADC128_VOLTAGE_CHANNEL(3),
+};
+
 static const struct adc128_configuration adc128_config[] = {
 	{ adc128s052_channels, ARRAY_SIZE(adc128s052_channels) },
 	{ adc122s021_channels, ARRAY_SIZE(adc122s021_channels) },
+	{ adc124s021_channels, ARRAY_SIZE(adc124s021_channels) },
 };
 
 static const struct iio_info adc128_info = {
@@ -177,6 +186,7 @@ static int adc128_remove(struct spi_device *spi)
 static const struct of_device_id adc128_of_match[] = {
 	{ .compatible = "ti,adc128s052", },
 	{ .compatible = "ti,adc122s021", },
+	{ .compatible = "ti,adc124s021", },
 	{ /* sentinel */ },
 };
 MODULE_DEVICE_TABLE(of, adc128_of_match);
@@ -184,6 +194,7 @@ MODULE_DEVICE_TABLE(of, adc128_of_match);
 static const struct spi_device_id adc128_id[] = {
 	{ "adc128s052", 0},	/* index into adc128_config */
 	{ "adc122s021",	1},
+	{ "adc124s021", 2},
 	{ }
 };
 MODULE_DEVICE_TABLE(spi, adc128_id);
diff --git a/drivers/iio/adc/ti-ads8688.c b/drivers/iio/adc/ti-ads8688.c
new file mode 100644
index 000000000..03e907028
--- /dev/null
+++ b/drivers/iio/adc/ti-ads8688.c
@@ -0,0 +1,486 @@
+/*
+ * Copyright (C) 2015 Prevas A/S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+#include <linux/spi/spi.h>
+#include <linux/regulator/consumer.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/of.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+#define ADS8688_CMD_REG(x)		(x << 8)
+#define ADS8688_CMD_REG_NOOP		0x00
+#define ADS8688_CMD_REG_RST		0x85
+#define ADS8688_CMD_REG_MAN_CH(chan)	(0xC0 | (4 * chan))
+#define ADS8688_CMD_DONT_CARE_BITS	16
+
+#define ADS8688_PROG_REG(x)		(x << 9)
+#define ADS8688_PROG_REG_RANGE_CH(chan)	(0x05 + chan)
+#define ADS8688_PROG_WR_BIT		BIT(8)
+#define ADS8688_PROG_DONT_CARE_BITS	8
+
+#define ADS8688_REG_PLUSMINUS25VREF	0
+#define ADS8688_REG_PLUSMINUS125VREF	1
+#define ADS8688_REG_PLUSMINUS0625VREF	2
+#define ADS8688_REG_PLUS25VREF		5
+#define ADS8688_REG_PLUS125VREF		6
+
+#define ADS8688_VREF_MV			4096
+#define ADS8688_REALBITS		16
+
+/*
+ * enum ads8688_range - ADS8688 reference voltage range
+ * @ADS8688_PLUSMINUS25VREF: Device is configured for input range ±2.5 * VREF
+ * @ADS8688_PLUSMINUS125VREF: Device is configured for input range ±1.25 * VREF
+ * @ADS8688_PLUSMINUS0625VREF: Device is configured for input range ±0.625 * VREF
+ * @ADS8688_PLUS25VREF: Device is configured for input range 0 - 2.5 * VREF
+ * @ADS8688_PLUS125VREF: Device is configured for input range 0 - 1.25 * VREF
+ */
+enum ads8688_range {
+	ADS8688_PLUSMINUS25VREF,
+	ADS8688_PLUSMINUS125VREF,
+	ADS8688_PLUSMINUS0625VREF,
+	ADS8688_PLUS25VREF,
+	ADS8688_PLUS125VREF,
+};
+
+struct ads8688_chip_info {
+	const struct iio_chan_spec *channels;
+	unsigned int num_channels;
+};
+
+struct ads8688_state {
+	struct mutex			lock;
+	const struct ads8688_chip_info	*chip_info;
+	struct spi_device		*spi;
+	struct regulator		*reg;
+	unsigned int			vref_mv;
+	enum ads8688_range		range[8];
+	union {
+		__be32 d32;
+		u8 d8[4];
+	} data[2] ____cacheline_aligned;
+};
+
+enum ads8688_id {
+	ID_ADS8684,
+	ID_ADS8688,
+};
+
+struct ads8688_ranges {
+	enum ads8688_range range;
+	unsigned int scale;
+	int offset;
+	u8 reg;
+};
+
+static const struct ads8688_ranges ads8688_range_def[5] = {
+	{
+		.range = ADS8688_PLUSMINUS25VREF,
+		.scale = 76295,
+		.offset = -(1 << (ADS8688_REALBITS - 1)),
+		.reg = ADS8688_REG_PLUSMINUS25VREF,
+	}, {
+		.range = ADS8688_PLUSMINUS125VREF,
+		.scale = 38148,
+		.offset = -(1 << (ADS8688_REALBITS - 1)),
+		.reg = ADS8688_REG_PLUSMINUS125VREF,
+	}, {
+		.range = ADS8688_PLUSMINUS0625VREF,
+		.scale = 19074,
+		.offset = -(1 << (ADS8688_REALBITS - 1)),
+		.reg = ADS8688_REG_PLUSMINUS0625VREF,
+	}, {
+		.range = ADS8688_PLUS25VREF,
+		.scale = 38148,
+		.offset = 0,
+		.reg = ADS8688_REG_PLUS25VREF,
+	}, {
+		.range = ADS8688_PLUS125VREF,
+		.scale = 19074,
+		.offset = 0,
+		.reg = ADS8688_REG_PLUS125VREF,
+	}
+};
+
+static ssize_t ads8688_show_scales(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	struct ads8688_state *st = iio_priv(dev_to_iio_dev(dev));
+
+	return sprintf(buf, "0.%09u 0.%09u 0.%09u\n",
+		       ads8688_range_def[0].scale * st->vref_mv,
+		       ads8688_range_def[1].scale * st->vref_mv,
+		       ads8688_range_def[2].scale * st->vref_mv);
+}
+
+static ssize_t ads8688_show_offsets(struct device *dev,
+				    struct device_attribute *attr, char *buf)
+{
+	return sprintf(buf, "%d %d\n", ads8688_range_def[0].offset,
+		       ads8688_range_def[3].offset);
+}
+
+static IIO_DEVICE_ATTR(in_voltage_scale_available, S_IRUGO,
+		       ads8688_show_scales, NULL, 0);
+static IIO_DEVICE_ATTR(in_voltage_offset_available, S_IRUGO,
+		       ads8688_show_offsets, NULL, 0);
+
+static struct attribute *ads8688_attributes[] = {
+	&iio_dev_attr_in_voltage_scale_available.dev_attr.attr,
+	&iio_dev_attr_in_voltage_offset_available.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group ads8688_attribute_group = {
+	.attrs = ads8688_attributes,
+};
+
+#define ADS8688_CHAN(index)					\
+{								\
+	.type = IIO_VOLTAGE,					\
+	.indexed = 1,						\
+	.channel = index,					\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW)		\
+			      | BIT(IIO_CHAN_INFO_SCALE)	\
+			      | BIT(IIO_CHAN_INFO_OFFSET),	\
+}
+
+static const struct iio_chan_spec ads8684_channels[] = {
+	ADS8688_CHAN(0),
+	ADS8688_CHAN(1),
+	ADS8688_CHAN(2),
+	ADS8688_CHAN(3),
+};
+
+static const struct iio_chan_spec ads8688_channels[] = {
+	ADS8688_CHAN(0),
+	ADS8688_CHAN(1),
+	ADS8688_CHAN(2),
+	ADS8688_CHAN(3),
+	ADS8688_CHAN(4),
+	ADS8688_CHAN(5),
+	ADS8688_CHAN(6),
+	ADS8688_CHAN(7),
+};
+
+static int ads8688_prog_write(struct iio_dev *indio_dev, unsigned int addr,
+			      unsigned int val)
+{
+	struct ads8688_state *st = iio_priv(indio_dev);
+	u32 tmp;
+
+	tmp = ADS8688_PROG_REG(addr) | ADS8688_PROG_WR_BIT | val;
+	tmp <<= ADS8688_PROG_DONT_CARE_BITS;
+	st->data[0].d32 = cpu_to_be32(tmp);
+
+	return spi_write(st->spi, &st->data[0].d8[1], 3);
+}
+
+static int ads8688_reset(struct iio_dev *indio_dev)
+{
+	struct ads8688_state *st = iio_priv(indio_dev);
+	u32 tmp;
+
+	tmp = ADS8688_CMD_REG(ADS8688_CMD_REG_RST);
+	tmp <<= ADS8688_CMD_DONT_CARE_BITS;
+	st->data[0].d32 = cpu_to_be32(tmp);
+
+	return spi_write(st->spi, &st->data[0].d8[0], 4);
+}
+
+static int ads8688_read(struct iio_dev *indio_dev, unsigned int chan)
+{
+	struct ads8688_state *st = iio_priv(indio_dev);
+	int ret;
+	u32 tmp;
+	struct spi_transfer t[] = {
+		{
+			.tx_buf = &st->data[0].d8[0],
+			.len = 4,
+			.cs_change = 1,
+		}, {
+			.tx_buf = &st->data[1].d8[0],
+			.rx_buf = &st->data[1].d8[0],
+			.len = 4,
+		},
+	};
+
+	tmp = ADS8688_CMD_REG(ADS8688_CMD_REG_MAN_CH(chan));
+	tmp <<= ADS8688_CMD_DONT_CARE_BITS;
+	st->data[0].d32 = cpu_to_be32(tmp);
+
+	tmp = ADS8688_CMD_REG(ADS8688_CMD_REG_NOOP);
+	tmp <<= ADS8688_CMD_DONT_CARE_BITS;
+	st->data[1].d32 = cpu_to_be32(tmp);
+
+	ret = spi_sync_transfer(st->spi, t, ARRAY_SIZE(t));
+	if (ret < 0)
+		return ret;
+
+	return be32_to_cpu(st->data[1].d32) & 0xffff;
+}
+
+static int ads8688_read_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan,
+			    int *val, int *val2, long m)
+{
+	int ret, offset;
+	unsigned long scale_mv;
+
+	struct ads8688_state *st = iio_priv(indio_dev);
+
+	mutex_lock(&st->lock);
+	switch (m) {
+	case IIO_CHAN_INFO_RAW:
+		ret = ads8688_read(indio_dev, chan->channel);
+		mutex_unlock(&st->lock);
+		if (ret < 0)
+			return ret;
+		*val = ret;
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		scale_mv = st->vref_mv;
+		scale_mv *= ads8688_range_def[st->range[chan->channel]].scale;
+		*val = 0;
+		*val2 = scale_mv;
+		mutex_unlock(&st->lock);
+		return IIO_VAL_INT_PLUS_NANO;
+	case IIO_CHAN_INFO_OFFSET:
+		offset = ads8688_range_def[st->range[chan->channel]].offset;
+		*val = offset;
+		mutex_unlock(&st->lock);
+		return IIO_VAL_INT;
+	}
+	mutex_unlock(&st->lock);
+
+	return -EINVAL;
+}
+
+static int ads8688_write_reg_range(struct iio_dev *indio_dev,
+				   struct iio_chan_spec const *chan,
+				   enum ads8688_range range)
+{
+	unsigned int tmp;
+	int ret;
+
+	tmp = ADS8688_PROG_REG_RANGE_CH(chan->channel);
+	ret = ads8688_prog_write(indio_dev, tmp, range);
+
+	return ret;
+}
+
+static int ads8688_write_raw(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan,
+			     int val, int val2, long mask)
+{
+	struct ads8688_state *st = iio_priv(indio_dev);
+	unsigned int scale = 0;
+	int ret = -EINVAL, i, offset = 0;
+
+	mutex_lock(&st->lock);
+	switch (mask) {
+	case IIO_CHAN_INFO_SCALE:
+		/* If the offset is 0 the ±2.5 * VREF mode is not available */
+		offset = ads8688_range_def[st->range[chan->channel]].offset;
+		if (offset == 0 && val2 == ads8688_range_def[0].scale * st->vref_mv) {
+			mutex_unlock(&st->lock);
+			return -EINVAL;
+		}
+
+		/* Lookup new mode */
+		for (i = 0; i < ARRAY_SIZE(ads8688_range_def); i++)
+			if (val2 == ads8688_range_def[i].scale * st->vref_mv &&
+			    offset == ads8688_range_def[i].offset) {
+				ret = ads8688_write_reg_range(indio_dev, chan,
+					ads8688_range_def[i].reg);
+				break;
+			}
+		break;
+	case IIO_CHAN_INFO_OFFSET:
+		/*
+		 * There are only two available offsets:
+		 * 0 and -(1 << (ADS8688_REALBITS - 1))
+		 */
+		if (!(ads8688_range_def[0].offset == val ||
+		    ads8688_range_def[3].offset == val)) {
+			mutex_unlock(&st->lock);
+			return -EINVAL;
+		}
+
+		/*
+		 * If the device are in ±2.5 * VREF mode, it's not allowed to
+		 * switch to a mode where the offset is 0
+		 */
+		if (val == 0 &&
+		    st->range[chan->channel] == ADS8688_PLUSMINUS25VREF) {
+			mutex_unlock(&st->lock);
+			return -EINVAL;
+		}
+
+		scale = ads8688_range_def[st->range[chan->channel]].scale;
+
+		/* Lookup new mode */
+		for (i = 0; i < ARRAY_SIZE(ads8688_range_def); i++)
+			if (val == ads8688_range_def[i].offset &&
+			    scale == ads8688_range_def[i].scale) {
+				ret = ads8688_write_reg_range(indio_dev, chan,
+					ads8688_range_def[i].reg);
+				break;
+			}
+		break;
+	}
+
+	if (!ret)
+		st->range[chan->channel] = ads8688_range_def[i].range;
+
+	mutex_unlock(&st->lock);
+
+	return ret;
+}
+
+static int ads8688_write_raw_get_fmt(struct iio_dev *indio_dev,
+				     struct iio_chan_spec const *chan,
+				     long mask)
+{
+	switch (mask) {
+	case IIO_CHAN_INFO_SCALE:
+		return IIO_VAL_INT_PLUS_NANO;
+	case IIO_CHAN_INFO_OFFSET:
+		return IIO_VAL_INT;
+	}
+
+	return -EINVAL;
+}
+
+static const struct iio_info ads8688_info = {
+	.read_raw = &ads8688_read_raw,
+	.write_raw = &ads8688_write_raw,
+	.write_raw_get_fmt = &ads8688_write_raw_get_fmt,
+	.attrs = &ads8688_attribute_group,
+	.driver_module = THIS_MODULE,
+};
+
+static const struct ads8688_chip_info ads8688_chip_info_tbl[] = {
+	[ID_ADS8684] = {
+		.channels = ads8684_channels,
+		.num_channels = ARRAY_SIZE(ads8684_channels),
+	},
+	[ID_ADS8688] = {
+		.channels = ads8688_channels,
+		.num_channels = ARRAY_SIZE(ads8688_channels),
+	},
+};
+
+static int ads8688_probe(struct spi_device *spi)
+{
+	struct ads8688_state *st;
+	struct iio_dev *indio_dev;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
+	if (indio_dev == NULL)
+		return -ENOMEM;
+
+	st = iio_priv(indio_dev);
+
+	st->reg = devm_regulator_get_optional(&spi->dev, "vref");
+	if (!IS_ERR(st->reg)) {
+		ret = regulator_enable(st->reg);
+		if (ret)
+			return ret;
+
+		ret = regulator_get_voltage(st->reg);
+		if (ret < 0)
+			goto error_out;
+
+		st->vref_mv = ret / 1000;
+	} else {
+		/* Use internal reference */
+		st->vref_mv = ADS8688_VREF_MV;
+	}
+
+	st->chip_info =	&ads8688_chip_info_tbl[spi_get_device_id(spi)->driver_data];
+
+	spi->mode = SPI_MODE_1;
+
+	spi_set_drvdata(spi, indio_dev);
+
+	st->spi = spi;
+
+	indio_dev->name = spi_get_device_id(spi)->name;
+	indio_dev->dev.parent = &spi->dev;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = st->chip_info->channels;
+	indio_dev->num_channels = st->chip_info->num_channels;
+	indio_dev->info = &ads8688_info;
+
+	ads8688_reset(indio_dev);
+
+	mutex_init(&st->lock);
+
+	ret = iio_device_register(indio_dev);
+	if (ret)
+		goto error_out;
+
+	return 0;
+
+error_out:
+	if (!IS_ERR_OR_NULL(st->reg))
+		regulator_disable(st->reg);
+
+	return ret;
+}
+
+static int ads8688_remove(struct spi_device *spi)
+{
+	struct iio_dev *indio_dev = spi_get_drvdata(spi);
+	struct ads8688_state *st = iio_priv(indio_dev);
+
+	iio_device_unregister(indio_dev);
+
+	if (!IS_ERR_OR_NULL(st->reg))
+		regulator_disable(st->reg);
+
+	return 0;
+}
+
+static const struct spi_device_id ads8688_id[] = {
+	{"ads8684", ID_ADS8684},
+	{"ads8688", ID_ADS8688},
+	{}
+};
+MODULE_DEVICE_TABLE(spi, ads8688_id);
+
+static const struct of_device_id ads8688_of_match[] = {
+	{ .compatible = "ti,ads8684" },
+	{ .compatible = "ti,ads8688" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ads8688_of_match);
+
+static struct spi_driver ads8688_driver = {
+	.driver = {
+		.name	= "ads8688",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= ads8688_probe,
+	.remove		= ads8688_remove,
+	.id_table	= ads8688_id,
+};
+module_spi_driver(ads8688_driver);
+
+MODULE_AUTHOR("Sean Nyekjaer <sean.nyekjaer@prevas.dk>");
+MODULE_DESCRIPTION("Texas Instruments ADS8688 driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/adc/xilinx-xadc-core.c b/drivers/iio/adc/xilinx-xadc-core.c
index 02e636a1c..0a6beb3d9 100644
--- a/drivers/iio/adc/xilinx-xadc-core.c
+++ b/drivers/iio/adc/xilinx-xadc-core.c
@@ -803,7 +803,7 @@ err:
 	return ret;
 }
 
-static struct iio_buffer_setup_ops xadc_buffer_ops = {
+static const struct iio_buffer_setup_ops xadc_buffer_ops = {
 	.preenable = &xadc_preenable,
 	.postenable = &iio_triggered_buffer_postenable,
 	.predisable = &iio_triggered_buffer_predisable,