summaryrefslogtreecommitdiff
path: root/drivers/iio/imu/inv_mpu6050
diff options
context:
space:
mode:
authorAndré Fabian Silva Delgado <emulatorman@parabola.nu>2016-06-10 05:30:17 -0300
committerAndré Fabian Silva Delgado <emulatorman@parabola.nu>2016-06-10 05:30:17 -0300
commitd635711daa98be86d4c7fd01499c34f566b54ccb (patch)
treeaa5cc3760a27c3d57146498cb82fa549547de06c /drivers/iio/imu/inv_mpu6050
parentc91265cd0efb83778f015b4d4b1129bd2cfd075e (diff)
Linux-libre 4.6.2-gnu
Diffstat (limited to 'drivers/iio/imu/inv_mpu6050')
-rw-r--r--drivers/iio/imu/inv_mpu6050/Kconfig23
-rw-r--r--drivers/iio/imu/inv_mpu6050/Makefile8
-rw-r--r--drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c24
-rw-r--r--drivers/iio/imu/inv_mpu6050/inv_mpu_core.c458
-rw-r--r--drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c232
-rw-r--r--drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h37
-rw-r--r--drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c54
-rw-r--r--drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c99
-rw-r--r--drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c32
9 files changed, 640 insertions, 327 deletions
diff --git a/drivers/iio/imu/inv_mpu6050/Kconfig b/drivers/iio/imu/inv_mpu6050/Kconfig
index 8f8d1370e..847455a2d 100644
--- a/drivers/iio/imu/inv_mpu6050/Kconfig
+++ b/drivers/iio/imu/inv_mpu6050/Kconfig
@@ -3,15 +3,30 @@
#
config INV_MPU6050_IIO
- tristate "Invensense MPU6050 devices"
- depends on I2C && SYSFS
- depends on I2C_MUX
+ tristate
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
+
+config INV_MPU6050_I2C
+ tristate "Invensense MPU6050 devices (I2C)"
+ depends on I2C_MUX
+ select INV_MPU6050_IIO
+ select REGMAP_I2C
help
This driver supports the Invensense MPU6050 devices.
This driver can also support MPU6500 in MPU6050 compatibility mode
and also in MPU6500 mode with some limitations.
It is a gyroscope/accelerometer combo device.
This driver can be built as a module. The module will be called
- inv-mpu6050.
+ inv-mpu6050-i2c.
+
+config INV_MPU6050_SPI
+ tristate "Invensense MPU6050 devices (SPI)"
+ depends on SPI_MASTER
+ select INV_MPU6050_IIO
+ select REGMAP_SPI
+ help
+ This driver supports the Invensense MPU6050 devices.
+ It is a gyroscope/accelerometer combo device.
+ This driver can be built as a module. The module will be called
+ inv-mpu6050-spi.
diff --git a/drivers/iio/imu/inv_mpu6050/Makefile b/drivers/iio/imu/inv_mpu6050/Makefile
index f566f6a7b..734af5e6c 100644
--- a/drivers/iio/imu/inv_mpu6050/Makefile
+++ b/drivers/iio/imu/inv_mpu6050/Makefile
@@ -3,4 +3,10 @@
#
obj-$(CONFIG_INV_MPU6050_IIO) += inv-mpu6050.o
-inv-mpu6050-objs := inv_mpu_core.o inv_mpu_ring.o inv_mpu_trigger.o inv_mpu_acpi.o
+inv-mpu6050-objs := inv_mpu_core.o inv_mpu_ring.o inv_mpu_trigger.o
+
+obj-$(CONFIG_INV_MPU6050_I2C) += inv-mpu6050-i2c.o
+inv-mpu6050-i2c-objs := inv_mpu_i2c.o inv_mpu_acpi.o
+
+obj-$(CONFIG_INV_MPU6050_SPI) += inv-mpu6050-spi.o
+inv-mpu6050-spi-objs := inv_mpu_spi.o
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c
index 1c982a56a..2771106fd 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c
@@ -66,11 +66,11 @@ static int asus_acpi_get_sensor_info(struct acpi_device *adev,
union acpi_object *elem;
int j;
- elem = &(cpm->package.elements[i]);
+ elem = &cpm->package.elements[i];
for (j = 0; j < elem->package.count; ++j) {
union acpi_object *sub_elem;
- sub_elem = &(elem->package.elements[j]);
+ sub_elem = &elem->package.elements[j];
if (sub_elem->type == ACPI_TYPE_STRING)
strlcpy(info->type, sub_elem->string.pointer,
sizeof(info->type));
@@ -139,22 +139,23 @@ static int inv_mpu_process_acpi_config(struct i2c_client *client,
return 0;
}
-int inv_mpu_acpi_create_mux_client(struct inv_mpu6050_state *st)
+int inv_mpu_acpi_create_mux_client(struct i2c_client *client)
{
+ struct inv_mpu6050_state *st = iio_priv(dev_get_drvdata(&client->dev));
st->mux_client = NULL;
- if (ACPI_HANDLE(&st->client->dev)) {
+ if (ACPI_HANDLE(&client->dev)) {
struct i2c_board_info info;
struct acpi_device *adev;
int ret = -1;
- adev = ACPI_COMPANION(&st->client->dev);
+ adev = ACPI_COMPANION(&client->dev);
memset(&info, 0, sizeof(info));
dmi_check_system(inv_mpu_dev_list);
switch (matched_product_name) {
case INV_MPU_ASUS_T100TA:
- ret = asus_acpi_get_sensor_info(adev, st->client,
+ ret = asus_acpi_get_sensor_info(adev, client,
&info);
break;
/* Add more matched product processing here */
@@ -166,7 +167,7 @@ int inv_mpu_acpi_create_mux_client(struct inv_mpu6050_state *st)
/* No matching DMI, so create device on INV6XX type */
unsigned short primary, secondary;
- ret = inv_mpu_process_acpi_config(st->client, &primary,
+ ret = inv_mpu_process_acpi_config(client, &primary,
&secondary);
if (!ret && secondary) {
char *name;
@@ -185,14 +186,15 @@ int inv_mpu_acpi_create_mux_client(struct inv_mpu6050_state *st)
st->mux_client = i2c_new_device(st->mux_adapter, &info);
if (!st->mux_client)
return -ENODEV;
-
}
return 0;
}
-void inv_mpu_acpi_delete_mux_client(struct inv_mpu6050_state *st)
+void inv_mpu_acpi_delete_mux_client(struct i2c_client *client)
{
+ struct inv_mpu6050_state *st = iio_priv(dev_get_drvdata(&client->dev));
+
if (st->mux_client)
i2c_unregister_device(st->mux_client);
}
@@ -200,12 +202,12 @@ void inv_mpu_acpi_delete_mux_client(struct inv_mpu6050_state *st)
#include "inv_mpu_iio.h"
-int inv_mpu_acpi_create_mux_client(struct inv_mpu6050_state *st)
+int inv_mpu_acpi_create_mux_client(struct i2c_client *client)
{
return 0;
}
-void inv_mpu_acpi_delete_mux_client(struct inv_mpu6050_state *st)
+void inv_mpu_acpi_delete_mux_client(struct i2c_client *client)
{
}
#endif
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
index f0e06093b..d192953e9 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
@@ -39,6 +39,26 @@ static const int gyro_scale_6050[] = {133090, 266181, 532362, 1064724};
*/
static const int accel_scale[] = {598, 1196, 2392, 4785};
+static const struct inv_mpu6050_reg_map reg_set_6500 = {
+ .sample_rate_div = INV_MPU6050_REG_SAMPLE_RATE_DIV,
+ .lpf = INV_MPU6050_REG_CONFIG,
+ .user_ctrl = INV_MPU6050_REG_USER_CTRL,
+ .fifo_en = INV_MPU6050_REG_FIFO_EN,
+ .gyro_config = INV_MPU6050_REG_GYRO_CONFIG,
+ .accl_config = INV_MPU6050_REG_ACCEL_CONFIG,
+ .fifo_count_h = INV_MPU6050_REG_FIFO_COUNT_H,
+ .fifo_r_w = INV_MPU6050_REG_FIFO_R_W,
+ .raw_gyro = INV_MPU6050_REG_RAW_GYRO,
+ .raw_accl = INV_MPU6050_REG_RAW_ACCEL,
+ .temperature = INV_MPU6050_REG_TEMPERATURE,
+ .int_enable = INV_MPU6050_REG_INT_ENABLE,
+ .pwr_mgmt_1 = INV_MPU6050_REG_PWR_MGMT_1,
+ .pwr_mgmt_2 = INV_MPU6050_REG_PWR_MGMT_2,
+ .int_pin_cfg = INV_MPU6050_REG_INT_PIN_CFG,
+ .accl_offset = INV_MPU6500_REG_ACCEL_OFFSET,
+ .gyro_offset = INV_MPU6050_REG_GYRO_OFFSET,
+};
+
static const struct inv_mpu6050_reg_map reg_set_6050 = {
.sample_rate_div = INV_MPU6050_REG_SAMPLE_RATE_DIV,
.lpf = INV_MPU6050_REG_CONFIG,
@@ -55,6 +75,8 @@ static const struct inv_mpu6050_reg_map reg_set_6050 = {
.pwr_mgmt_1 = INV_MPU6050_REG_PWR_MGMT_1,
.pwr_mgmt_2 = INV_MPU6050_REG_PWR_MGMT_2,
.int_pin_cfg = INV_MPU6050_REG_INT_PIN_CFG,
+ .accl_offset = INV_MPU6050_REG_ACCEL_OFFSET,
+ .gyro_offset = INV_MPU6050_REG_GYRO_OFFSET,
};
static const struct inv_mpu6050_chip_config chip_config_6050 = {
@@ -66,7 +88,13 @@ static const struct inv_mpu6050_chip_config chip_config_6050 = {
.accl_fs = INV_MPU6050_FS_02G,
};
-static const struct inv_mpu6050_hw hw_info[INV_NUM_PARTS] = {
+static const struct inv_mpu6050_hw hw_info[] = {
+ {
+ .num_reg = 117,
+ .name = "MPU6500",
+ .reg = &reg_set_6500,
+ .config = &chip_config_6050,
+ },
{
.num_reg = 117,
.name = "MPU6050",
@@ -75,134 +103,53 @@ static const struct inv_mpu6050_hw hw_info[INV_NUM_PARTS] = {
},
};
-int inv_mpu6050_write_reg(struct inv_mpu6050_state *st, int reg, u8 d)
-{
- return i2c_smbus_write_i2c_block_data(st->client, reg, 1, &d);
-}
-
-/*
- * The i2c read/write needs to happen in unlocked mode. As the parent
- * adapter is common. If we use locked versions, it will fail as
- * the mux adapter will lock the parent i2c adapter, while calling
- * select/deselect functions.
- */
-static int inv_mpu6050_write_reg_unlocked(struct inv_mpu6050_state *st,
- u8 reg, u8 d)
-{
- int ret;
- u8 buf[2];
- struct i2c_msg msg[1] = {
- {
- .addr = st->client->addr,
- .flags = 0,
- .len = sizeof(buf),
- .buf = buf,
- }
- };
-
- buf[0] = reg;
- buf[1] = d;
- ret = __i2c_transfer(st->client->adapter, msg, 1);
- if (ret != 1)
- return ret;
-
- return 0;
-}
-
-static int inv_mpu6050_select_bypass(struct i2c_adapter *adap, void *mux_priv,
- u32 chan_id)
-{
- struct iio_dev *indio_dev = mux_priv;
- struct inv_mpu6050_state *st = iio_priv(indio_dev);
- int ret = 0;
-
- /* Use the same mutex which was used everywhere to protect power-op */
- mutex_lock(&indio_dev->mlock);
- if (!st->powerup_count) {
- ret = inv_mpu6050_write_reg_unlocked(st, st->reg->pwr_mgmt_1,
- 0);
- if (ret)
- goto write_error;
-
- msleep(INV_MPU6050_REG_UP_TIME);
- }
- if (!ret) {
- st->powerup_count++;
- ret = inv_mpu6050_write_reg_unlocked(st, st->reg->int_pin_cfg,
- st->client->irq |
- INV_MPU6050_BIT_BYPASS_EN);
- }
-write_error:
- mutex_unlock(&indio_dev->mlock);
-
- return ret;
-}
-
-static int inv_mpu6050_deselect_bypass(struct i2c_adapter *adap,
- void *mux_priv, u32 chan_id)
-{
- struct iio_dev *indio_dev = mux_priv;
- struct inv_mpu6050_state *st = iio_priv(indio_dev);
-
- mutex_lock(&indio_dev->mlock);
- /* It doesn't really mattter, if any of the calls fails */
- inv_mpu6050_write_reg_unlocked(st, st->reg->int_pin_cfg,
- st->client->irq);
- st->powerup_count--;
- if (!st->powerup_count)
- inv_mpu6050_write_reg_unlocked(st, st->reg->pwr_mgmt_1,
- INV_MPU6050_BIT_SLEEP);
- mutex_unlock(&indio_dev->mlock);
-
- return 0;
-}
-
int inv_mpu6050_switch_engine(struct inv_mpu6050_state *st, bool en, u32 mask)
{
- u8 d, mgmt_1;
+ unsigned int d, mgmt_1;
int result;
-
- /* switch clock needs to be careful. Only when gyro is on, can
- clock source be switched to gyro. Otherwise, it must be set to
- internal clock */
- if (INV_MPU6050_BIT_PWR_GYRO_STBY == mask) {
- result = i2c_smbus_read_i2c_block_data(st->client,
- st->reg->pwr_mgmt_1, 1, &mgmt_1);
- if (result != 1)
+ /*
+ * switch clock needs to be careful. Only when gyro is on, can
+ * clock source be switched to gyro. Otherwise, it must be set to
+ * internal clock
+ */
+ if (mask == INV_MPU6050_BIT_PWR_GYRO_STBY) {
+ result = regmap_read(st->map, st->reg->pwr_mgmt_1, &mgmt_1);
+ if (result)
return result;
mgmt_1 &= ~INV_MPU6050_BIT_CLK_MASK;
}
- if ((INV_MPU6050_BIT_PWR_GYRO_STBY == mask) && (!en)) {
- /* turning off gyro requires switch to internal clock first.
- Then turn off gyro engine */
+ if ((mask == INV_MPU6050_BIT_PWR_GYRO_STBY) && (!en)) {
+ /*
+ * turning off gyro requires switch to internal clock first.
+ * Then turn off gyro engine
+ */
mgmt_1 |= INV_CLK_INTERNAL;
- result = inv_mpu6050_write_reg(st, st->reg->pwr_mgmt_1, mgmt_1);
+ result = regmap_write(st->map, st->reg->pwr_mgmt_1, mgmt_1);
if (result)
return result;
}
- result = i2c_smbus_read_i2c_block_data(st->client,
- st->reg->pwr_mgmt_2, 1, &d);
- if (result != 1)
+ result = regmap_read(st->map, st->reg->pwr_mgmt_2, &d);
+ if (result)
return result;
if (en)
d &= ~mask;
else
d |= mask;
- result = inv_mpu6050_write_reg(st, st->reg->pwr_mgmt_2, d);
+ result = regmap_write(st->map, st->reg->pwr_mgmt_2, d);
if (result)
return result;
if (en) {
/* Wait for output stabilize */
msleep(INV_MPU6050_TEMP_UP_TIME);
- if (INV_MPU6050_BIT_PWR_GYRO_STBY == mask) {
+ if (mask == INV_MPU6050_BIT_PWR_GYRO_STBY) {
/* switch internal clock to PLL */
mgmt_1 |= INV_CLK_PLL;
- result = inv_mpu6050_write_reg(st,
- st->reg->pwr_mgmt_1, mgmt_1);
+ result = regmap_write(st->map,
+ st->reg->pwr_mgmt_1, mgmt_1);
if (result)
return result;
}
@@ -218,25 +165,26 @@ int inv_mpu6050_set_power_itg(struct inv_mpu6050_state *st, bool power_on)
if (power_on) {
/* Already under indio-dev->mlock mutex */
if (!st->powerup_count)
- result = inv_mpu6050_write_reg(st, st->reg->pwr_mgmt_1,
- 0);
+ result = regmap_write(st->map, st->reg->pwr_mgmt_1, 0);
if (!result)
st->powerup_count++;
} else {
st->powerup_count--;
if (!st->powerup_count)
- result = inv_mpu6050_write_reg(st, st->reg->pwr_mgmt_1,
- INV_MPU6050_BIT_SLEEP);
+ result = regmap_write(st->map, st->reg->pwr_mgmt_1,
+ INV_MPU6050_BIT_SLEEP);
}
if (result)
return result;
if (power_on)
- msleep(INV_MPU6050_REG_UP_TIME);
+ usleep_range(INV_MPU6050_REG_UP_TIME_MIN,
+ INV_MPU6050_REG_UP_TIME_MAX);
return 0;
}
+EXPORT_SYMBOL_GPL(inv_mpu6050_set_power_itg);
/**
* inv_mpu6050_init_config() - Initialize hardware, disable FIFO.
@@ -257,59 +205,73 @@ static int inv_mpu6050_init_config(struct iio_dev *indio_dev)
if (result)
return result;
d = (INV_MPU6050_FSR_2000DPS << INV_MPU6050_GYRO_CONFIG_FSR_SHIFT);
- result = inv_mpu6050_write_reg(st, st->reg->gyro_config, d);
+ result = regmap_write(st->map, st->reg->gyro_config, d);
if (result)
return result;
d = INV_MPU6050_FILTER_20HZ;
- result = inv_mpu6050_write_reg(st, st->reg->lpf, d);
+ result = regmap_write(st->map, st->reg->lpf, d);
if (result)
return result;
d = INV_MPU6050_ONE_K_HZ / INV_MPU6050_INIT_FIFO_RATE - 1;
- result = inv_mpu6050_write_reg(st, st->reg->sample_rate_div, d);
+ result = regmap_write(st->map, st->reg->sample_rate_div, d);
if (result)
return result;
d = (INV_MPU6050_FS_02G << INV_MPU6050_ACCL_CONFIG_FSR_SHIFT);
- result = inv_mpu6050_write_reg(st, st->reg->accl_config, d);
+ result = regmap_write(st->map, st->reg->accl_config, d);
if (result)
return result;
memcpy(&st->chip_config, hw_info[st->chip_type].config,
- sizeof(struct inv_mpu6050_chip_config));
+ sizeof(struct inv_mpu6050_chip_config));
result = inv_mpu6050_set_power_itg(st, false);
return result;
}
+static int inv_mpu6050_sensor_set(struct inv_mpu6050_state *st, int reg,
+ int axis, int val)
+{
+ int ind, result;
+ __be16 d = cpu_to_be16(val);
+
+ ind = (axis - IIO_MOD_X) * 2;
+ result = regmap_bulk_write(st->map, reg + ind, (u8 *)&d, 2);
+ if (result)
+ return -EINVAL;
+
+ return 0;
+}
+
static int inv_mpu6050_sensor_show(struct inv_mpu6050_state *st, int reg,
- int axis, int *val)
+ int axis, int *val)
{
int ind, result;
__be16 d;
ind = (axis - IIO_MOD_X) * 2;
- result = i2c_smbus_read_i2c_block_data(st->client, reg + ind, 2,
- (u8 *)&d);
- if (result != 2)
+ result = regmap_bulk_read(st->map, reg + ind, (u8 *)&d, 2);
+ if (result)
return -EINVAL;
*val = (short)be16_to_cpup(&d);
return IIO_VAL_INT;
}
-static int inv_mpu6050_read_raw(struct iio_dev *indio_dev,
- struct iio_chan_spec const *chan,
- int *val,
- int *val2,
- long mask) {
+static int
+inv_mpu6050_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long mask)
+{
struct inv_mpu6050_state *st = iio_priv(indio_dev);
+ int ret = 0;
switch (mask) {
case IIO_CHAN_INFO_RAW:
{
- int ret, result;
+ int result;
ret = IIO_VAL_INT;
result = 0;
@@ -323,16 +285,16 @@ static int inv_mpu6050_read_raw(struct iio_dev *indio_dev,
switch (chan->type) {
case IIO_ANGL_VEL:
if (!st->chip_config.gyro_fifo_enable ||
- !st->chip_config.enable) {
+ !st->chip_config.enable) {
result = inv_mpu6050_switch_engine(st, true,
INV_MPU6050_BIT_PWR_GYRO_STBY);
if (result)
goto error_read_raw;
}
- ret = inv_mpu6050_sensor_show(st, st->reg->raw_gyro,
- chan->channel2, val);
+ ret = inv_mpu6050_sensor_show(st, st->reg->raw_gyro,
+ chan->channel2, val);
if (!st->chip_config.gyro_fifo_enable ||
- !st->chip_config.enable) {
+ !st->chip_config.enable) {
result = inv_mpu6050_switch_engine(st, false,
INV_MPU6050_BIT_PWR_GYRO_STBY);
if (result)
@@ -341,16 +303,16 @@ static int inv_mpu6050_read_raw(struct iio_dev *indio_dev,
break;
case IIO_ACCEL:
if (!st->chip_config.accl_fifo_enable ||
- !st->chip_config.enable) {
+ !st->chip_config.enable) {
result = inv_mpu6050_switch_engine(st, true,
INV_MPU6050_BIT_PWR_ACCL_STBY);
if (result)
goto error_read_raw;
}
ret = inv_mpu6050_sensor_show(st, st->reg->raw_accl,
- chan->channel2, val);
+ chan->channel2, val);
if (!st->chip_config.accl_fifo_enable ||
- !st->chip_config.enable) {
+ !st->chip_config.enable) {
result = inv_mpu6050_switch_engine(st, false,
INV_MPU6050_BIT_PWR_ACCL_STBY);
if (result)
@@ -360,8 +322,8 @@ static int inv_mpu6050_read_raw(struct iio_dev *indio_dev,
case IIO_TEMP:
/* wait for stablization */
msleep(INV_MPU6050_SENSOR_UP_TIME);
- inv_mpu6050_sensor_show(st, st->reg->temperature,
- IIO_MOD_X, val);
+ ret = inv_mpu6050_sensor_show(st, st->reg->temperature,
+ IIO_MOD_X, val);
break;
default:
ret = -EINVAL;
@@ -405,6 +367,20 @@ error_read_raw:
default:
return -EINVAL;
}
+ case IIO_CHAN_INFO_CALIBBIAS:
+ switch (chan->type) {
+ case IIO_ANGL_VEL:
+ ret = inv_mpu6050_sensor_show(st, st->reg->gyro_offset,
+ chan->channel2, val);
+ return IIO_VAL_INT;
+ case IIO_ACCEL:
+ ret = inv_mpu6050_sensor_show(st, st->reg->accl_offset,
+ chan->channel2, val);
+ return IIO_VAL_INT;
+
+ default:
+ return -EINVAL;
+ }
default:
return -EINVAL;
}
@@ -418,8 +394,7 @@ static int inv_mpu6050_write_gyro_scale(struct inv_mpu6050_state *st, int val)
for (i = 0; i < ARRAY_SIZE(gyro_scale_6050); ++i) {
if (gyro_scale_6050[i] == val) {
d = (i << INV_MPU6050_GYRO_CONFIG_FSR_SHIFT);
- result = inv_mpu6050_write_reg(st,
- st->reg->gyro_config, d);
+ result = regmap_write(st->map, st->reg->gyro_config, d);
if (result)
return result;
@@ -448,6 +423,7 @@ static int inv_write_raw_get_fmt(struct iio_dev *indio_dev,
return -EINVAL;
}
+
static int inv_mpu6050_write_accel_scale(struct inv_mpu6050_state *st, int val)
{
int result, i;
@@ -456,8 +432,7 @@ static int inv_mpu6050_write_accel_scale(struct inv_mpu6050_state *st, int val)
for (i = 0; i < ARRAY_SIZE(accel_scale); ++i) {
if (accel_scale[i] == val) {
d = (i << INV_MPU6050_ACCL_CONFIG_FSR_SHIFT);
- result = inv_mpu6050_write_reg(st,
- st->reg->accl_config, d);
+ result = regmap_write(st->map, st->reg->accl_config, d);
if (result)
return result;
@@ -470,16 +445,17 @@ static int inv_mpu6050_write_accel_scale(struct inv_mpu6050_state *st, int val)
}
static int inv_mpu6050_write_raw(struct iio_dev *indio_dev,
- struct iio_chan_spec const *chan,
- int val,
- int val2,
- long mask) {
+ struct iio_chan_spec const *chan,
+ int val, int val2, long mask)
+{
struct inv_mpu6050_state *st = iio_priv(indio_dev);
int result;
mutex_lock(&indio_dev->mlock);
- /* we should only update scale when the chip is disabled, i.e.,
- not running */
+ /*
+ * we should only update scale when the chip is disabled, i.e.
+ * not running
+ */
if (st->chip_config.enable) {
result = -EBUSY;
goto error_write_raw;
@@ -502,6 +478,21 @@ static int inv_mpu6050_write_raw(struct iio_dev *indio_dev,
break;
}
break;
+ case IIO_CHAN_INFO_CALIBBIAS:
+ switch (chan->type) {
+ case IIO_ANGL_VEL:
+ result = inv_mpu6050_sensor_set(st,
+ st->reg->gyro_offset,
+ chan->channel2, val);
+ break;
+ case IIO_ACCEL:
+ result = inv_mpu6050_sensor_set(st,
+ st->reg->accl_offset,
+ chan->channel2, val);
+ break;
+ default:
+ result = -EINVAL;
+ }
default:
result = -EINVAL;
break;
@@ -537,7 +528,7 @@ static int inv_mpu6050_set_lpf(struct inv_mpu6050_state *st, int rate)
while ((h < hz[i]) && (i < ARRAY_SIZE(d) - 1))
i++;
data = d[i];
- result = inv_mpu6050_write_reg(st, st->reg->lpf, data);
+ result = regmap_write(st->map, st->reg->lpf, data);
if (result)
return result;
st->chip_config.lpf = data;
@@ -548,8 +539,9 @@ static int inv_mpu6050_set_lpf(struct inv_mpu6050_state *st, int rate)
/**
* inv_mpu6050_fifo_rate_store() - Set fifo rate.
*/
-static ssize_t inv_mpu6050_fifo_rate_store(struct device *dev,
- struct device_attribute *attr, const char *buf, size_t count)
+static ssize_t
+inv_mpu6050_fifo_rate_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
{
s32 fifo_rate;
u8 d;
@@ -560,7 +552,7 @@ static ssize_t inv_mpu6050_fifo_rate_store(struct device *dev,
if (kstrtoint(buf, 10, &fifo_rate))
return -EINVAL;
if (fifo_rate < INV_MPU6050_MIN_FIFO_RATE ||
- fifo_rate > INV_MPU6050_MAX_FIFO_RATE)
+ fifo_rate > INV_MPU6050_MAX_FIFO_RATE)
return -EINVAL;
if (fifo_rate == st->chip_config.fifo_rate)
return count;
@@ -575,7 +567,7 @@ static ssize_t inv_mpu6050_fifo_rate_store(struct device *dev,
goto fifo_rate_fail;
d = INV_MPU6050_ONE_K_HZ / fifo_rate - 1;
- result = inv_mpu6050_write_reg(st, st->reg->sample_rate_div, d);
+ result = regmap_write(st->map, st->reg->sample_rate_div, d);
if (result)
goto fifo_rate_fail;
st->chip_config.fifo_rate = fifo_rate;
@@ -596,8 +588,9 @@ fifo_rate_fail:
/**
* inv_fifo_rate_show() - Get the current sampling rate.
*/
-static ssize_t inv_fifo_rate_show(struct device *dev,
- struct device_attribute *attr, char *buf)
+static ssize_t
+inv_fifo_rate_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
{
struct inv_mpu6050_state *st = iio_priv(dev_to_iio_dev(dev));
@@ -608,16 +601,18 @@ static ssize_t inv_fifo_rate_show(struct device *dev,
* inv_attr_show() - calling this function will show current
* parameters.
*/
-static ssize_t inv_attr_show(struct device *dev,
- struct device_attribute *attr, char *buf)
+static ssize_t inv_attr_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
{
struct inv_mpu6050_state *st = iio_priv(dev_to_iio_dev(dev));
struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
s8 *m;
switch (this_attr->address) {
- /* In MPU6050, the two matrix are the same because gyro and accel
- are integrated in one chip */
+ /*
+ * In MPU6050, the two matrix are the same because gyro and accel
+ * are integrated in one chip
+ */
case ATTR_GYRO_MATRIX:
case ATTR_ACCL_MATRIX:
m = st->plat_data.orientation;
@@ -654,14 +649,15 @@ static int inv_mpu6050_validate_trigger(struct iio_dev *indio_dev,
.type = _type, \
.modified = 1, \
.channel2 = _channel2, \
- .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
+ BIT(IIO_CHAN_INFO_CALIBBIAS), \
.scan_index = _index, \
.scan_type = { \
.sign = 's', \
.realbits = 16, \
.storagebits = 16, \
- .shift = 0 , \
+ .shift = 0, \
.endianness = IIO_BE, \
}, \
}
@@ -674,7 +670,7 @@ static const struct iio_chan_spec inv_mpu_channels[] = {
*/
{
.type = IIO_TEMP,
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW)
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW)
| BIT(IIO_CHAN_INFO_OFFSET)
| BIT(IIO_CHAN_INFO_SCALE),
.scan_index = -1,
@@ -727,25 +723,25 @@ static const struct iio_info mpu_info = {
/**
* inv_check_and_setup_chip() - check and setup chip.
*/
-static int inv_check_and_setup_chip(struct inv_mpu6050_state *st,
- const struct i2c_device_id *id)
+static int inv_check_and_setup_chip(struct inv_mpu6050_state *st)
{
int result;
- st->chip_type = INV_MPU6050;
st->hw = &hw_info[st->chip_type];
st->reg = hw_info[st->chip_type].reg;
/* reset to make sure previous state are not there */
- result = inv_mpu6050_write_reg(st, st->reg->pwr_mgmt_1,
- INV_MPU6050_BIT_H_RESET);
+ result = regmap_write(st->map, st->reg->pwr_mgmt_1,
+ INV_MPU6050_BIT_H_RESET);
if (result)
return result;
msleep(INV_MPU6050_POWER_UP_TIME);
- /* toggle power state. After reset, the sleep bit could be on
- or off depending on the OTP settings. Toggling power would
- make it in a definite state as well as making the hardware
- state align with the software state */
+ /*
+ * toggle power state. After reset, the sleep bit could be on
+ * or off depending on the OTP settings. Toggling power would
+ * make it in a definite state as well as making the hardware
+ * state align with the software state
+ */
result = inv_mpu6050_set_power_itg(st, false);
if (result)
return result;
@@ -754,65 +750,59 @@ static int inv_check_and_setup_chip(struct inv_mpu6050_state *st,
return result;
result = inv_mpu6050_switch_engine(st, false,
- INV_MPU6050_BIT_PWR_ACCL_STBY);
+ INV_MPU6050_BIT_PWR_ACCL_STBY);
if (result)
return result;
result = inv_mpu6050_switch_engine(st, false,
- INV_MPU6050_BIT_PWR_GYRO_STBY);
+ INV_MPU6050_BIT_PWR_GYRO_STBY);
if (result)
return result;
return 0;
}
-/**
- * inv_mpu_probe() - probe function.
- * @client: i2c client.
- * @id: i2c device id.
- *
- * Returns 0 on success, a negative error code otherwise.
- */
-static int inv_mpu_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
+int inv_mpu_core_probe(struct regmap *regmap, int irq, const char *name,
+ int (*inv_mpu_bus_setup)(struct iio_dev *), int chip_type)
{
struct inv_mpu6050_state *st;
struct iio_dev *indio_dev;
struct inv_mpu6050_platform_data *pdata;
+ struct device *dev = regmap_get_device(regmap);
int result;
- if (!i2c_check_functionality(client->adapter,
- I2C_FUNC_SMBUS_I2C_BLOCK))
- return -ENOSYS;
-
- indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*st));
+ indio_dev = devm_iio_device_alloc(dev, sizeof(*st));
if (!indio_dev)
return -ENOMEM;
st = iio_priv(indio_dev);
- st->client = client;
+ st->chip_type = chip_type;
st->powerup_count = 0;
- pdata = dev_get_platdata(&client->dev);
+ st->irq = irq;
+ st->map = regmap;
+ pdata = dev_get_platdata(dev);
if (pdata)
st->plat_data = *pdata;
/* power is turned on inside check chip type*/
- result = inv_check_and_setup_chip(st, id);
+ result = inv_check_and_setup_chip(st);
if (result)
return result;
+ if (inv_mpu_bus_setup)
+ inv_mpu_bus_setup(indio_dev);
+
result = inv_mpu6050_init_config(indio_dev);
if (result) {
- dev_err(&client->dev,
- "Could not initialize device.\n");
+ dev_err(dev, "Could not initialize device.\n");
return result;
}
- i2c_set_clientdata(client, indio_dev);
- indio_dev->dev.parent = &client->dev;
- /* id will be NULL when enumerated via ACPI */
- if (id)
- indio_dev->name = (char *)id->name;
+ dev_set_drvdata(dev, indio_dev);
+ indio_dev->dev.parent = dev;
+ /* name will be NULL when enumerated via ACPI */
+ if (name)
+ indio_dev->name = name;
else
- indio_dev->name = (char *)dev_name(&client->dev);
+ indio_dev->name = dev_name(dev);
indio_dev->channels = inv_mpu_channels;
indio_dev->num_channels = ARRAY_SIZE(inv_mpu_channels);
@@ -824,13 +814,12 @@ static int inv_mpu_probe(struct i2c_client *client,
inv_mpu6050_read_fifo,
NULL);
if (result) {
- dev_err(&st->client->dev, "configure buffer fail %d\n",
- result);
+ dev_err(dev, "configure buffer fail %d\n", result);
return result;
}
result = inv_mpu6050_probe_trigger(indio_dev);
if (result) {
- dev_err(&st->client->dev, "trigger probe fail %d\n", result);
+ dev_err(dev, "trigger probe fail %d\n", result);
goto out_unreg_ring;
}
@@ -838,102 +827,47 @@ static int inv_mpu_probe(struct i2c_client *client,
spin_lock_init(&st->time_stamp_lock);
result = iio_device_register(indio_dev);
if (result) {
- dev_err(&st->client->dev, "IIO register fail %d\n", result);
+ dev_err(dev, "IIO register fail %d\n", result);
goto out_remove_trigger;
}
- st->mux_adapter = i2c_add_mux_adapter(client->adapter,
- &client->dev,
- indio_dev,
- 0, 0, 0,
- inv_mpu6050_select_bypass,
- inv_mpu6050_deselect_bypass);
- if (!st->mux_adapter) {
- result = -ENODEV;
- goto out_unreg_device;
- }
-
- result = inv_mpu_acpi_create_mux_client(st);
- if (result)
- goto out_del_mux;
-
return 0;
-out_del_mux:
- i2c_del_mux_adapter(st->mux_adapter);
-out_unreg_device:
- iio_device_unregister(indio_dev);
out_remove_trigger:
inv_mpu6050_remove_trigger(st);
out_unreg_ring:
iio_triggered_buffer_cleanup(indio_dev);
return result;
}
+EXPORT_SYMBOL_GPL(inv_mpu_core_probe);
-static int inv_mpu_remove(struct i2c_client *client)
+int inv_mpu_core_remove(struct device *dev)
{
- struct iio_dev *indio_dev = i2c_get_clientdata(client);
- struct inv_mpu6050_state *st = iio_priv(indio_dev);
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
- inv_mpu_acpi_delete_mux_client(st);
- i2c_del_mux_adapter(st->mux_adapter);
iio_device_unregister(indio_dev);
- inv_mpu6050_remove_trigger(st);
+ inv_mpu6050_remove_trigger(iio_priv(indio_dev));
iio_triggered_buffer_cleanup(indio_dev);
return 0;
}
+EXPORT_SYMBOL_GPL(inv_mpu_core_remove);
+
#ifdef CONFIG_PM_SLEEP
static int inv_mpu_resume(struct device *dev)
{
- return inv_mpu6050_set_power_itg(
- iio_priv(i2c_get_clientdata(to_i2c_client(dev))), true);
+ return inv_mpu6050_set_power_itg(iio_priv(dev_get_drvdata(dev)), true);
}
static int inv_mpu_suspend(struct device *dev)
{
- return inv_mpu6050_set_power_itg(
- iio_priv(i2c_get_clientdata(to_i2c_client(dev))), false);
+ return inv_mpu6050_set_power_itg(iio_priv(dev_get_drvdata(dev)), false);
}
-static SIMPLE_DEV_PM_OPS(inv_mpu_pmops, inv_mpu_suspend, inv_mpu_resume);
-
-#define INV_MPU6050_PMOPS (&inv_mpu_pmops)
-#else
-#define INV_MPU6050_PMOPS NULL
#endif /* CONFIG_PM_SLEEP */
-/*
- * device id table is used to identify what device can be
- * supported by this driver
- */
-static const struct i2c_device_id inv_mpu_id[] = {
- {"mpu6050", INV_MPU6050},
- {"mpu6500", INV_MPU6500},
- {}
-};
-
-MODULE_DEVICE_TABLE(i2c, inv_mpu_id);
-
-static const struct acpi_device_id inv_acpi_match[] = {
- {"INVN6500", 0},
- { },
-};
-
-MODULE_DEVICE_TABLE(acpi, inv_acpi_match);
-
-static struct i2c_driver inv_mpu_driver = {
- .probe = inv_mpu_probe,
- .remove = inv_mpu_remove,
- .id_table = inv_mpu_id,
- .driver = {
- .name = "inv-mpu6050",
- .pm = INV_MPU6050_PMOPS,
- .acpi_match_table = ACPI_PTR(inv_acpi_match),
- },
-};
-
-module_i2c_driver(inv_mpu_driver);
+SIMPLE_DEV_PM_OPS(inv_mpu_pmops, inv_mpu_suspend, inv_mpu_resume);
+EXPORT_SYMBOL_GPL(inv_mpu_pmops);
MODULE_AUTHOR("Invensense Corporation");
MODULE_DESCRIPTION("Invensense device MPU6050 driver");
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c
new file mode 100644
index 000000000..5ee4e0dc0
--- /dev/null
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c
@@ -0,0 +1,232 @@
+/*
+* Copyright (C) 2012 Invensense, Inc.
+*
+* This software is licensed under the terms of the GNU General Public
+* License version 2, as published by the Free Software Foundation, and
+* may be copied, distributed, and modified under those terms.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*/
+
+#include <linux/acpi.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/i2c-mux.h>
+#include <linux/iio/iio.h>
+#include <linux/module.h>
+#include "inv_mpu_iio.h"
+
+static const struct regmap_config inv_mpu_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+};
+
+/*
+ * The i2c read/write needs to happen in unlocked mode. As the parent
+ * adapter is common. If we use locked versions, it will fail as
+ * the mux adapter will lock the parent i2c adapter, while calling
+ * select/deselect functions.
+ */
+static int inv_mpu6050_write_reg_unlocked(struct i2c_client *client,
+ u8 reg, u8 d)
+{
+ int ret;
+ u8 buf[2] = {reg, d};
+ struct i2c_msg msg[1] = {
+ {
+ .addr = client->addr,
+ .flags = 0,
+ .len = sizeof(buf),
+ .buf = buf,
+ }
+ };
+
+ ret = __i2c_transfer(client->adapter, msg, 1);
+ if (ret != 1)
+ return ret;
+
+ return 0;
+}
+
+static int inv_mpu6050_select_bypass(struct i2c_adapter *adap, void *mux_priv,
+ u32 chan_id)
+{
+ struct i2c_client *client = mux_priv;
+ struct iio_dev *indio_dev = dev_get_drvdata(&client->dev);
+ struct inv_mpu6050_state *st = iio_priv(indio_dev);
+ int ret = 0;
+
+ /* Use the same mutex which was used everywhere to protect power-op */
+ mutex_lock(&indio_dev->mlock);
+ if (!st->powerup_count) {
+ ret = inv_mpu6050_write_reg_unlocked(client,
+ st->reg->pwr_mgmt_1, 0);
+ if (ret)
+ goto write_error;
+
+ usleep_range(INV_MPU6050_REG_UP_TIME_MIN,
+ INV_MPU6050_REG_UP_TIME_MAX);
+ }
+ if (!ret) {
+ st->powerup_count++;
+ ret = inv_mpu6050_write_reg_unlocked(client,
+ st->reg->int_pin_cfg,
+ INV_MPU6050_INT_PIN_CFG |
+ INV_MPU6050_BIT_BYPASS_EN);
+ }
+write_error:
+ mutex_unlock(&indio_dev->mlock);
+
+ return ret;
+}
+
+static int inv_mpu6050_deselect_bypass(struct i2c_adapter *adap,
+ void *mux_priv, u32 chan_id)
+{
+ struct i2c_client *client = mux_priv;
+ struct iio_dev *indio_dev = dev_get_drvdata(&client->dev);
+ struct inv_mpu6050_state *st = iio_priv(indio_dev);
+
+ mutex_lock(&indio_dev->mlock);
+ /* It doesn't really mattter, if any of the calls fails */
+ inv_mpu6050_write_reg_unlocked(client, st->reg->int_pin_cfg,
+ INV_MPU6050_INT_PIN_CFG);
+ st->powerup_count--;
+ if (!st->powerup_count)
+ inv_mpu6050_write_reg_unlocked(client, st->reg->pwr_mgmt_1,
+ INV_MPU6050_BIT_SLEEP);
+ mutex_unlock(&indio_dev->mlock);
+
+ return 0;
+}
+
+static const char *inv_mpu_match_acpi_device(struct device *dev, int *chip_id)
+{
+ const struct acpi_device_id *id;
+
+ id = acpi_match_device(dev->driver->acpi_match_table, dev);
+ if (!id)
+ return NULL;
+
+ *chip_id = (int)id->driver_data;
+
+ return dev_name(dev);
+}
+
+/**
+ * inv_mpu_probe() - probe function.
+ * @client: i2c client.
+ * @id: i2c device id.
+ *
+ * Returns 0 on success, a negative error code otherwise.
+ */
+static int inv_mpu_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct inv_mpu6050_state *st;
+ int result, chip_type;
+ struct regmap *regmap;
+ const char *name;
+
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_I2C_BLOCK))
+ return -EOPNOTSUPP;
+
+ if (id) {
+ chip_type = (int)id->driver_data;
+ name = id->name;
+ } else if (ACPI_HANDLE(&client->dev)) {
+ name = inv_mpu_match_acpi_device(&client->dev, &chip_type);
+ if (!name)
+ return -ENODEV;
+ } else {
+ return -ENOSYS;
+ }
+
+ regmap = devm_regmap_init_i2c(client, &inv_mpu_regmap_config);
+ if (IS_ERR(regmap)) {
+ dev_err(&client->dev, "Failed to register i2c regmap %d\n",
+ (int)PTR_ERR(regmap));
+ return PTR_ERR(regmap);
+ }
+
+ result = inv_mpu_core_probe(regmap, client->irq, name,
+ NULL, chip_type);
+ if (result < 0)
+ return result;
+
+ st = iio_priv(dev_get_drvdata(&client->dev));
+ st->mux_adapter = i2c_add_mux_adapter(client->adapter,
+ &client->dev,
+ client,
+ 0, 0, 0,
+ inv_mpu6050_select_bypass,
+ inv_mpu6050_deselect_bypass);
+ if (!st->mux_adapter) {
+ result = -ENODEV;
+ goto out_unreg_device;
+ }
+
+ result = inv_mpu_acpi_create_mux_client(client);
+ if (result)
+ goto out_del_mux;
+
+ return 0;
+
+out_del_mux:
+ i2c_del_mux_adapter(st->mux_adapter);
+out_unreg_device:
+ inv_mpu_core_remove(&client->dev);
+ return result;
+}
+
+static int inv_mpu_remove(struct i2c_client *client)
+{
+ struct iio_dev *indio_dev = i2c_get_clientdata(client);
+ struct inv_mpu6050_state *st = iio_priv(indio_dev);
+
+ inv_mpu_acpi_delete_mux_client(client);
+ i2c_del_mux_adapter(st->mux_adapter);
+
+ return inv_mpu_core_remove(&client->dev);
+}
+
+/*
+ * device id table is used to identify what device can be
+ * supported by this driver
+ */
+static const struct i2c_device_id inv_mpu_id[] = {
+ {"mpu6050", INV_MPU6050},
+ {"mpu6500", INV_MPU6500},
+ {}
+};
+
+MODULE_DEVICE_TABLE(i2c, inv_mpu_id);
+
+static const struct acpi_device_id inv_acpi_match[] = {
+ {"INVN6500", 0},
+ { },
+};
+
+MODULE_DEVICE_TABLE(acpi, inv_acpi_match);
+
+static struct i2c_driver inv_mpu_driver = {
+ .probe = inv_mpu_probe,
+ .remove = inv_mpu_remove,
+ .id_table = inv_mpu_id,
+ .driver = {
+ .acpi_match_table = ACPI_PTR(inv_acpi_match),
+ .name = "inv-mpu6050-i2c",
+ .pm = &inv_mpu_pmops,
+ },
+};
+
+module_i2c_driver(inv_mpu_driver);
+
+MODULE_AUTHOR("Invensense Corporation");
+MODULE_DESCRIPTION("Invensense device MPU6050 driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
index db0a4a275..e302a4970 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
@@ -15,6 +15,7 @@
#include <linux/spinlock.h>
#include <linux/iio/iio.h>
#include <linux/iio/buffer.h>
+#include <linux/regmap.h>
#include <linux/iio/sysfs.h>
#include <linux/iio/kfifo_buf.h>
#include <linux/iio/trigger.h>
@@ -38,6 +39,9 @@
* @int_enable: Interrupt enable register.
* @pwr_mgmt_1: Controls chip's power state and clock source.
* @pwr_mgmt_2: Controls power state of individual sensors.
+ * @int_pin_cfg; Controls interrupt pin configuration.
+ * @accl_offset: Controls the accelerometer calibration offset.
+ * @gyro_offset: Controls the gyroscope calibration offset.
*/
struct inv_mpu6050_reg_map {
u8 sample_rate_div;
@@ -55,12 +59,15 @@ struct inv_mpu6050_reg_map {
u8 pwr_mgmt_1;
u8 pwr_mgmt_2;
u8 int_pin_cfg;
+ u8 accl_offset;
+ u8 gyro_offset;
};
/*device enum */
enum inv_devices {
INV_MPU6050,
INV_MPU6500,
+ INV_MPU6000,
INV_NUM_PARTS
};
@@ -107,9 +114,10 @@ struct inv_mpu6050_hw {
* @hw: Other hardware-specific information.
* @chip_type: chip type.
* @time_stamp_lock: spin lock to time stamp.
- * @client: i2c client handle.
* @plat_data: platform data.
* @timestamps: kfifo queue to store time stamp.
+ * @map regmap pointer.
+ * @irq interrupt number.
*/
struct inv_mpu6050_state {
#define TIMESTAMP_FIFO_SIZE 16
@@ -119,15 +127,19 @@ struct inv_mpu6050_state {
const struct inv_mpu6050_hw *hw;
enum inv_devices chip_type;
spinlock_t time_stamp_lock;
- struct i2c_client *client;
struct i2c_adapter *mux_adapter;
struct i2c_client *mux_client;
unsigned int powerup_count;
struct inv_mpu6050_platform_data plat_data;
DECLARE_KFIFO(timestamps, long long, TIMESTAMP_FIFO_SIZE);
+ struct regmap *map;
+ int irq;
};
/*register and associated bit definition*/
+#define INV_MPU6050_REG_ACCEL_OFFSET 0x06
+#define INV_MPU6050_REG_GYRO_OFFSET 0x13
+
#define INV_MPU6050_REG_SAMPLE_RATE_DIV 0x19
#define INV_MPU6050_REG_CONFIG 0x1A
#define INV_MPU6050_REG_GYRO_CONFIG 0x1B
@@ -151,6 +163,7 @@ struct inv_mpu6050_state {
#define INV_MPU6050_BIT_I2C_MST_EN 0x20
#define INV_MPU6050_BIT_FIFO_EN 0x40
#define INV_MPU6050_BIT_DMP_EN 0x80
+#define INV_MPU6050_BIT_I2C_IF_DIS 0x10
#define INV_MPU6050_REG_PWR_MGMT_1 0x6B
#define INV_MPU6050_BIT_H_RESET 0x80
@@ -167,10 +180,18 @@ struct inv_mpu6050_state {
#define INV_MPU6050_BYTES_PER_3AXIS_SENSOR 6
#define INV_MPU6050_FIFO_COUNT_BYTE 2
#define INV_MPU6050_FIFO_THRESHOLD 500
+
+/* mpu6500 registers */
+#define INV_MPU6500_REG_ACCEL_OFFSET 0x77
+
+/* delay time in milliseconds */
#define INV_MPU6050_POWER_UP_TIME 100
#define INV_MPU6050_TEMP_UP_TIME 100
#define INV_MPU6050_SENSOR_UP_TIME 30
-#define INV_MPU6050_REG_UP_TIME 5
+
+/* delay time in microseconds */
+#define INV_MPU6050_REG_UP_TIME_MIN 5000
+#define INV_MPU6050_REG_UP_TIME_MAX 10000
#define INV_MPU6050_TEMP_OFFSET 12421
#define INV_MPU6050_TEMP_SCALE 2941
@@ -185,6 +206,7 @@ struct inv_mpu6050_state {
#define INV_MPU6050_REG_INT_PIN_CFG 0x37
#define INV_MPU6050_BIT_BYPASS_EN 0x2
+#define INV_MPU6050_INT_PIN_CFG 0
/* init parameters */
#define INV_MPU6050_INIT_FIFO_RATE 50
@@ -252,5 +274,10 @@ int inv_reset_fifo(struct iio_dev *indio_dev);
int inv_mpu6050_switch_engine(struct inv_mpu6050_state *st, bool en, u32 mask);
int inv_mpu6050_write_reg(struct inv_mpu6050_state *st, int reg, u8 val);
int inv_mpu6050_set_power_itg(struct inv_mpu6050_state *st, bool power_on);
-int inv_mpu_acpi_create_mux_client(struct inv_mpu6050_state *st);
-void inv_mpu_acpi_delete_mux_client(struct inv_mpu6050_state *st);
+int inv_mpu_acpi_create_mux_client(struct i2c_client *client);
+void inv_mpu_acpi_delete_mux_client(struct i2c_client *client);
+int inv_mpu_core_probe(struct regmap *regmap, int irq, const char *name,
+ int (*inv_mpu_bus_setup)(struct iio_dev *), int chip_type);
+int inv_mpu_core_remove(struct device *dev);
+int inv_mpu6050_set_power_itg(struct inv_mpu6050_state *st, bool power_on);
+extern const struct dev_pm_ops inv_mpu_pmops;
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
index ba27e2775..d0700628e 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
@@ -13,7 +13,6 @@
#include <linux/module.h>
#include <linux/slab.h>
-#include <linux/i2c.h>
#include <linux/err.h>
#include <linux/delay.h>
#include <linux/sysfs.h>
@@ -41,23 +40,24 @@ int inv_reset_fifo(struct iio_dev *indio_dev)
struct inv_mpu6050_state *st = iio_priv(indio_dev);
/* disable interrupt */
- result = inv_mpu6050_write_reg(st, st->reg->int_enable, 0);
+ result = regmap_write(st->map, st->reg->int_enable, 0);
if (result) {
- dev_err(&st->client->dev, "int_enable failed %d\n", result);
+ dev_err(regmap_get_device(st->map), "int_enable failed %d\n",
+ result);
return result;
}
/* disable the sensor output to FIFO */
- result = inv_mpu6050_write_reg(st, st->reg->fifo_en, 0);
+ result = regmap_write(st->map, st->reg->fifo_en, 0);
if (result)
goto reset_fifo_fail;
/* disable fifo reading */
- result = inv_mpu6050_write_reg(st, st->reg->user_ctrl, 0);
+ result = regmap_write(st->map, st->reg->user_ctrl, 0);
if (result)
goto reset_fifo_fail;
/* reset FIFO*/
- result = inv_mpu6050_write_reg(st, st->reg->user_ctrl,
- INV_MPU6050_BIT_FIFO_RST);
+ result = regmap_write(st->map, st->reg->user_ctrl,
+ INV_MPU6050_BIT_FIFO_RST);
if (result)
goto reset_fifo_fail;
@@ -67,14 +67,14 @@ int inv_reset_fifo(struct iio_dev *indio_dev)
/* enable interrupt */
if (st->chip_config.accl_fifo_enable ||
st->chip_config.gyro_fifo_enable) {
- result = inv_mpu6050_write_reg(st, st->reg->int_enable,
- INV_MPU6050_BIT_DATA_RDY_EN);
+ result = regmap_write(st->map, st->reg->int_enable,
+ INV_MPU6050_BIT_DATA_RDY_EN);
if (result)
return result;
}
/* enable FIFO reading and I2C master interface*/
- result = inv_mpu6050_write_reg(st, st->reg->user_ctrl,
- INV_MPU6050_BIT_FIFO_EN);
+ result = regmap_write(st->map, st->reg->user_ctrl,
+ INV_MPU6050_BIT_FIFO_EN);
if (result)
goto reset_fifo_fail;
/* enable sensor output to FIFO */
@@ -83,16 +83,16 @@ int inv_reset_fifo(struct iio_dev *indio_dev)
d |= INV_MPU6050_BITS_GYRO_OUT;
if (st->chip_config.accl_fifo_enable)
d |= INV_MPU6050_BIT_ACCEL_OUT;
- result = inv_mpu6050_write_reg(st, st->reg->fifo_en, d);
+ result = regmap_write(st->map, st->reg->fifo_en, d);
if (result)
goto reset_fifo_fail;
return 0;
reset_fifo_fail:
- dev_err(&st->client->dev, "reset fifo failed %d\n", result);
- result = inv_mpu6050_write_reg(st, st->reg->int_enable,
- INV_MPU6050_BIT_DATA_RDY_EN);
+ dev_err(regmap_get_device(st->map), "reset fifo failed %d\n", result);
+ result = regmap_write(st->map, st->reg->int_enable,
+ INV_MPU6050_BIT_DATA_RDY_EN);
return result;
}
@@ -109,7 +109,7 @@ irqreturn_t inv_mpu6050_irq_handler(int irq, void *p)
timestamp = iio_get_time_ns();
kfifo_in_spinlocked(&st->timestamps, &timestamp, 1,
- &st->time_stamp_lock);
+ &st->time_stamp_lock);
return IRQ_WAKE_THREAD;
}
@@ -143,10 +143,9 @@ irqreturn_t inv_mpu6050_read_fifo(int irq, void *p)
* read fifo_count register to know how many bytes inside FIFO
* right now
*/
- result = i2c_smbus_read_i2c_block_data(st->client,
- st->reg->fifo_count_h,
- INV_MPU6050_FIFO_COUNT_BYTE, data);
- if (result != INV_MPU6050_FIFO_COUNT_BYTE)
+ result = regmap_bulk_read(st->map, st->reg->fifo_count_h, data,
+ INV_MPU6050_FIFO_COUNT_BYTE);
+ if (result)
goto end_session;
fifo_count = be16_to_cpup((__be16 *)(&data[0]));
if (fifo_count < bytes_per_datum)
@@ -158,22 +157,21 @@ irqreturn_t inv_mpu6050_read_fifo(int irq, void *p)
goto flush_fifo;
/* Timestamp mismatch. */
if (kfifo_len(&st->timestamps) >
- fifo_count / bytes_per_datum + INV_MPU6050_TIME_STAMP_TOR)
- goto flush_fifo;
+ fifo_count / bytes_per_datum + INV_MPU6050_TIME_STAMP_TOR)
+ goto flush_fifo;
while (fifo_count >= bytes_per_datum) {
- result = i2c_smbus_read_i2c_block_data(st->client,
- st->reg->fifo_r_w,
- bytes_per_datum, data);
- if (result != bytes_per_datum)
+ result = regmap_bulk_read(st->map, st->reg->fifo_r_w,
+ data, bytes_per_datum);
+ if (result)
goto flush_fifo;
result = kfifo_out(&st->timestamps, &timestamp, 1);
/* when there is no timestamp, put timestamp as 0 */
- if (0 == result)
+ if (result == 0)
timestamp = 0;
result = iio_push_to_buffers_with_timestamp(indio_dev, data,
- timestamp);
+ timestamp);
if (result)
goto flush_fifo;
fifo_count -= bytes_per_datum;
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c
new file mode 100644
index 000000000..7bcb8d839
--- /dev/null
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c
@@ -0,0 +1,99 @@
+/*
+* Copyright (C) 2015 Intel Corporation Inc.
+*
+* This software is licensed under the terms of the GNU General Public
+* License version 2, as published by the Free Software Foundation, and
+* may be copied, distributed, and modified under those terms.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*/
+#include <linux/module.h>
+#include <linux/acpi.h>
+#include <linux/spi/spi.h>
+#include <linux/regmap.h>
+#include <linux/iio/iio.h>
+#include "inv_mpu_iio.h"
+
+static const struct regmap_config inv_mpu_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+};
+
+static int inv_mpu_i2c_disable(struct iio_dev *indio_dev)
+{
+ struct inv_mpu6050_state *st = iio_priv(indio_dev);
+ int ret = 0;
+
+ ret = inv_mpu6050_set_power_itg(st, true);
+ if (ret)
+ return ret;
+
+ ret = regmap_write(st->map, INV_MPU6050_REG_USER_CTRL,
+ INV_MPU6050_BIT_I2C_IF_DIS);
+ if (ret) {
+ inv_mpu6050_set_power_itg(st, false);
+ return ret;
+ }
+
+ return inv_mpu6050_set_power_itg(st, false);
+}
+
+static int inv_mpu_probe(struct spi_device *spi)
+{
+ struct regmap *regmap;
+ const struct spi_device_id *id = spi_get_device_id(spi);
+ const char *name = id ? id->name : NULL;
+ const int chip_type = id ? id->driver_data : 0;
+
+ regmap = devm_regmap_init_spi(spi, &inv_mpu_regmap_config);
+ if (IS_ERR(regmap)) {
+ dev_err(&spi->dev, "Failed to register spi regmap %d\n",
+ (int)PTR_ERR(regmap));
+ return PTR_ERR(regmap);
+ }
+
+ return inv_mpu_core_probe(regmap, spi->irq, name,
+ inv_mpu_i2c_disable, chip_type);
+}
+
+static int inv_mpu_remove(struct spi_device *spi)
+{
+ return inv_mpu_core_remove(&spi->dev);
+}
+
+/*
+ * device id table is used to identify what device can be
+ * supported by this driver
+ */
+static const struct spi_device_id inv_mpu_id[] = {
+ {"mpu6000", INV_MPU6000},
+ {}
+};
+
+MODULE_DEVICE_TABLE(spi, inv_mpu_id);
+
+static const struct acpi_device_id inv_acpi_match[] = {
+ {"INVN6000", 0},
+ { },
+};
+MODULE_DEVICE_TABLE(acpi, inv_acpi_match);
+
+static struct spi_driver inv_mpu_driver = {
+ .probe = inv_mpu_probe,
+ .remove = inv_mpu_remove,
+ .id_table = inv_mpu_id,
+ .driver = {
+ .acpi_match_table = ACPI_PTR(inv_acpi_match),
+ .name = "inv-mpu6000-spi",
+ .pm = &inv_mpu_pmops,
+ },
+};
+
+module_spi_driver(inv_mpu_driver);
+
+MODULE_AUTHOR("Adriana Reus <adriana.reus@intel.com>");
+MODULE_DESCRIPTION("Invensense device MPU6000 driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c
index 844610c3a..e8818d4dd 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c
@@ -19,19 +19,19 @@ static void inv_scan_query(struct iio_dev *indio_dev)
st->chip_config.gyro_fifo_enable =
test_bit(INV_MPU6050_SCAN_GYRO_X,
- indio_dev->active_scan_mask) ||
- test_bit(INV_MPU6050_SCAN_GYRO_Y,
- indio_dev->active_scan_mask) ||
- test_bit(INV_MPU6050_SCAN_GYRO_Z,
- indio_dev->active_scan_mask);
+ indio_dev->active_scan_mask) ||
+ test_bit(INV_MPU6050_SCAN_GYRO_Y,
+ indio_dev->active_scan_mask) ||
+ test_bit(INV_MPU6050_SCAN_GYRO_Z,
+ indio_dev->active_scan_mask);
st->chip_config.accl_fifo_enable =
test_bit(INV_MPU6050_SCAN_ACCL_X,
- indio_dev->active_scan_mask) ||
- test_bit(INV_MPU6050_SCAN_ACCL_Y,
- indio_dev->active_scan_mask) ||
- test_bit(INV_MPU6050_SCAN_ACCL_Z,
- indio_dev->active_scan_mask);
+ indio_dev->active_scan_mask) ||
+ test_bit(INV_MPU6050_SCAN_ACCL_Y,
+ indio_dev->active_scan_mask) ||
+ test_bit(INV_MPU6050_SCAN_ACCL_Z,
+ indio_dev->active_scan_mask);
}
/**
@@ -65,15 +65,15 @@ static int inv_mpu6050_set_enable(struct iio_dev *indio_dev, bool enable)
if (result)
return result;
} else {
- result = inv_mpu6050_write_reg(st, st->reg->fifo_en, 0);
+ result = regmap_write(st->map, st->reg->fifo_en, 0);
if (result)
return result;
- result = inv_mpu6050_write_reg(st, st->reg->int_enable, 0);
+ result = regmap_write(st->map, st->reg->int_enable, 0);
if (result)
return result;
- result = inv_mpu6050_write_reg(st, st->reg->user_ctrl, 0);
+ result = regmap_write(st->map, st->reg->user_ctrl, 0);
if (result)
return result;
@@ -101,7 +101,7 @@ static int inv_mpu6050_set_enable(struct iio_dev *indio_dev, bool enable)
* @state: Desired trigger state
*/
static int inv_mpu_data_rdy_trigger_set_state(struct iio_trigger *trig,
- bool state)
+ bool state)
{
return inv_mpu6050_set_enable(iio_trigger_get_drvdata(trig), state);
}
@@ -123,7 +123,7 @@ int inv_mpu6050_probe_trigger(struct iio_dev *indio_dev)
if (!st->trig)
return -ENOMEM;
- ret = devm_request_irq(&indio_dev->dev, st->client->irq,
+ ret = devm_request_irq(&indio_dev->dev, st->irq,
&iio_trigger_generic_data_rdy_poll,
IRQF_TRIGGER_RISING,
"inv_mpu",
@@ -131,7 +131,7 @@ int inv_mpu6050_probe_trigger(struct iio_dev *indio_dev)
if (ret)
return ret;
- st->trig->dev.parent = &st->client->dev;
+ st->trig->dev.parent = regmap_get_device(st->map);
st->trig->ops = &inv_mpu_trigger_ops;
iio_trigger_set_drvdata(st->trig, indio_dev);