Linux-libre 4.7.1-gnupck-4.7.1-gnu

11 files changed, 1510 insertions, 69 deletions

diff --git a/drivers/iio/pressure/Kconfig b/drivers/iio/pressure/Kconfig
index 31c0e1fd2..cda9f128f 100644
--- a/drivers/iio/pressure/Kconfig
+++ b/drivers/iio/pressure/Kconfig
@@ -6,12 +6,13 @@
 menu "Pressure sensors"
 
 config BMP280
-	tristate "Bosch Sensortec BMP280 pressure sensor driver"
+	tristate "Bosch Sensortec BMP180 and BMP280 pressure sensor driver"
 	depends on I2C
+	depends on !(BMP085_I2C=y || BMP085_I2C=m)
 	select REGMAP_I2C
 	help
-	  Say yes here to build support for Bosch Sensortec BMP280
-	  pressure and temperature sensor.
+	  Say yes here to build support for Bosch Sensortec BMP180 and BMP280
+	  pressure and temperature sensors.
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called bmp280.
@@ -30,6 +31,17 @@ config HID_SENSOR_PRESS
 	  To compile this driver as a module, choose M here: the module
 	  will be called hid-sensor-press.
 
+config HP03
+	tristate "Hope RF HP03 temperature and pressure sensor driver"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  Say yes here to build support for Hope RF HP03 pressure and
+	  temperature sensor.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called hp03.
+
 config MPL115
 	tristate
 
@@ -148,4 +160,14 @@ config T5403
 	  To compile this driver as a module, choose M here: the module
 	  will be called t5403.
 
+config HP206C
+	tristate "HOPERF HP206C precision barometer and altimeter sensor"
+	depends on I2C
+	help
+	  Say yes here to build support for the HOPREF HP206C precision
+	  barometer and altimeter sensor.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called hp206c.
+
 endmenu
diff --git a/drivers/iio/pressure/Makefile b/drivers/iio/pressure/Makefile
index d336af14f..17d6e7afa 100644
--- a/drivers/iio/pressure/Makefile
+++ b/drivers/iio/pressure/Makefile
@@ -5,6 +5,7 @@
 # When adding new entries keep the list in alphabetical order
 obj-$(CONFIG_BMP280) += bmp280.o
 obj-$(CONFIG_HID_SENSOR_PRESS)   += hid-sensor-press.o
+obj-$(CONFIG_HP03) += hp03.o
 obj-$(CONFIG_MPL115) += mpl115.o
 obj-$(CONFIG_MPL115_I2C) += mpl115_i2c.o
 obj-$(CONFIG_MPL115_SPI) += mpl115_spi.o
@@ -17,6 +18,7 @@ obj-$(CONFIG_IIO_ST_PRESS) += st_pressure.o
 st_pressure-y := st_pressure_core.o
 st_pressure-$(CONFIG_IIO_BUFFER) += st_pressure_buffer.o
 obj-$(CONFIG_T5403) += t5403.o
+obj-$(CONFIG_HP206C) += hp206c.o
 
 obj-$(CONFIG_IIO_ST_PRESS_I2C) += st_pressure_i2c.o
 obj-$(CONFIG_IIO_ST_PRESS_SPI) += st_pressure_spi.o
diff --git a/drivers/iio/pressure/bmp280.c b/drivers/iio/pressure/bmp280.c
index a2602d8dd..724452d61 100644
--- a/drivers/iio/pressure/bmp280.c
+++ b/drivers/iio/pressure/bmp280.c
@@ -1,12 +1,15 @@
 /*
  * Copyright (c) 2014 Intel Corporation
  *
- * Driver for Bosch Sensortec BMP280 digital pressure sensor.
+ * Driver for Bosch Sensortec BMP180 and BMP280 digital pressure sensor.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  *
+ * Datasheet:
+ * https://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMP180-DS000-121.pdf
+ * https://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMP280-DS001-12.pdf
  */
 
 #define pr_fmt(fmt) "bmp280: " fmt
@@ -15,9 +18,11 @@
 #include <linux/i2c.h>
 #include <linux/acpi.h>
 #include <linux/regmap.h>
+#include <linux/delay.h>
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
 
+/* BMP280 specific registers */
 #define BMP280_REG_TEMP_XLSB		0xFC
 #define BMP280_REG_TEMP_LSB		0xFB
 #define BMP280_REG_TEMP_MSB		0xFA
@@ -26,10 +31,7 @@
 #define BMP280_REG_PRESS_MSB		0xF7
 
 #define BMP280_REG_CONFIG		0xF5
-#define BMP280_REG_CTRL_MEAS		0xF4
 #define BMP280_REG_STATUS		0xF3
-#define BMP280_REG_RESET		0xE0
-#define BMP280_REG_ID			0xD0
 
 #define BMP280_REG_COMP_TEMP_START	0x88
 #define BMP280_COMP_TEMP_REG_COUNT	6
@@ -46,25 +48,49 @@
 
 #define BMP280_OSRS_TEMP_MASK		(BIT(7) | BIT(6) | BIT(5))
 #define BMP280_OSRS_TEMP_SKIP		0
-#define BMP280_OSRS_TEMP_1X		BIT(5)
-#define BMP280_OSRS_TEMP_2X		BIT(6)
-#define BMP280_OSRS_TEMP_4X		(BIT(6) | BIT(5))
-#define BMP280_OSRS_TEMP_8X		BIT(7)
-#define BMP280_OSRS_TEMP_16X		(BIT(7) | BIT(5))
+#define BMP280_OSRS_TEMP_X(osrs_t)	((osrs_t) << 5)
+#define BMP280_OSRS_TEMP_1X		BMP280_OSRS_TEMP_X(1)
+#define BMP280_OSRS_TEMP_2X		BMP280_OSRS_TEMP_X(2)
+#define BMP280_OSRS_TEMP_4X		BMP280_OSRS_TEMP_X(3)
+#define BMP280_OSRS_TEMP_8X		BMP280_OSRS_TEMP_X(4)
+#define BMP280_OSRS_TEMP_16X		BMP280_OSRS_TEMP_X(5)
 
 #define BMP280_OSRS_PRESS_MASK		(BIT(4) | BIT(3) | BIT(2))
 #define BMP280_OSRS_PRESS_SKIP		0
-#define BMP280_OSRS_PRESS_1X		BIT(2)
-#define BMP280_OSRS_PRESS_2X		BIT(3)
-#define BMP280_OSRS_PRESS_4X		(BIT(3) | BIT(2))
-#define BMP280_OSRS_PRESS_8X		BIT(4)
-#define BMP280_OSRS_PRESS_16X		(BIT(4) | BIT(2))
+#define BMP280_OSRS_PRESS_X(osrs_p)	((osrs_p) << 2)
+#define BMP280_OSRS_PRESS_1X		BMP280_OSRS_PRESS_X(1)
+#define BMP280_OSRS_PRESS_2X		BMP280_OSRS_PRESS_X(2)
+#define BMP280_OSRS_PRESS_4X		BMP280_OSRS_PRESS_X(3)
+#define BMP280_OSRS_PRESS_8X		BMP280_OSRS_PRESS_X(4)
+#define BMP280_OSRS_PRESS_16X		BMP280_OSRS_PRESS_X(5)
 
 #define BMP280_MODE_MASK		(BIT(1) | BIT(0))
 #define BMP280_MODE_SLEEP		0
 #define BMP280_MODE_FORCED		BIT(0)
 #define BMP280_MODE_NORMAL		(BIT(1) | BIT(0))
 
+/* BMP180 specific registers */
+#define BMP180_REG_OUT_XLSB		0xF8
+#define BMP180_REG_OUT_LSB		0xF7
+#define BMP180_REG_OUT_MSB		0xF6
+
+#define BMP180_REG_CALIB_START		0xAA
+#define BMP180_REG_CALIB_COUNT		22
+
+#define BMP180_MEAS_SCO			BIT(5)
+#define BMP180_MEAS_TEMP		(0x0E | BMP180_MEAS_SCO)
+#define BMP180_MEAS_PRESS_X(oss)	((oss) << 6 | 0x14 | BMP180_MEAS_SCO)
+#define BMP180_MEAS_PRESS_1X		BMP180_MEAS_PRESS_X(0)
+#define BMP180_MEAS_PRESS_2X		BMP180_MEAS_PRESS_X(1)
+#define BMP180_MEAS_PRESS_4X		BMP180_MEAS_PRESS_X(2)
+#define BMP180_MEAS_PRESS_8X		BMP180_MEAS_PRESS_X(3)
+
+/* BMP180 and BMP280 common registers */
+#define BMP280_REG_CTRL_MEAS		0xF4
+#define BMP280_REG_RESET		0xE0
+#define BMP280_REG_ID			0xD0
+
+#define BMP180_CHIP_ID			0x55
 #define BMP280_CHIP_ID			0x58
 #define BMP280_SOFT_RESET_VAL		0xB6
 
@@ -72,6 +98,11 @@ struct bmp280_data {
 	struct i2c_client *client;
 	struct mutex lock;
 	struct regmap *regmap;
+	const struct bmp280_chip_info *chip_info;
+
+	/* log of base 2 of oversampling rate */
+	u8 oversampling_press;
+	u8 oversampling_temp;
 
 	/*
 	 * Carryover value from temperature conversion, used in pressure
@@ -80,9 +111,23 @@ struct bmp280_data {
 	s32 t_fine;
 };
 
+struct bmp280_chip_info {
+	const struct regmap_config *regmap_config;
+
+	const int *oversampling_temp_avail;
+	int num_oversampling_temp_avail;
+
+	const int *oversampling_press_avail;
+	int num_oversampling_press_avail;
+
+	int (*chip_config)(struct bmp280_data *);
+	int (*read_temp)(struct bmp280_data *, int *);
+	int (*read_press)(struct bmp280_data *, int *, int *);
+};
+
 /*
  * These enums are used for indexing into the array of compensation
- * parameters.
+ * parameters for BMP280.
  */
 enum { T1, T2, T3 };
 enum { P1, P2, P3, P4, P5, P6, P7, P8, P9 };
@@ -90,11 +135,13 @@ enum { P1, P2, P3, P4, P5, P6, P7, P8, P9 };
 static const struct iio_chan_spec bmp280_channels[] = {
 	{
 		.type = IIO_PRESSURE,
-		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) |
+				      BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
 	},
 	{
 		.type = IIO_TEMP,
-		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) |
+				      BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
 	},
 };
 
@@ -290,10 +337,25 @@ static int bmp280_read_raw(struct iio_dev *indio_dev,
 	case IIO_CHAN_INFO_PROCESSED:
 		switch (chan->type) {
 		case IIO_PRESSURE:
-			ret = bmp280_read_press(data, val, val2);
+			ret = data->chip_info->read_press(data, val, val2);
 			break;
 		case IIO_TEMP:
-			ret = bmp280_read_temp(data, val);
+			ret = data->chip_info->read_temp(data, val);
+			break;
+		default:
+			ret = -EINVAL;
+			break;
+		}
+		break;
+	case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+		switch (chan->type) {
+		case IIO_PRESSURE:
+			*val = 1 << data->oversampling_press;
+			ret = IIO_VAL_INT;
+			break;
+		case IIO_TEMP:
+			*val = 1 << data->oversampling_temp;
+			ret = IIO_VAL_INT;
 			break;
 		default:
 			ret = -EINVAL;
@@ -310,22 +372,135 @@ static int bmp280_read_raw(struct iio_dev *indio_dev,
 	return ret;
 }
 
+static int bmp280_write_oversampling_ratio_temp(struct bmp280_data *data,
+					       int val)
+{
+	int i;
+	const int *avail = data->chip_info->oversampling_temp_avail;
+	const int n = data->chip_info->num_oversampling_temp_avail;
+
+	for (i = 0; i < n; i++) {
+		if (avail[i] == val) {
+			data->oversampling_temp = ilog2(val);
+
+			return data->chip_info->chip_config(data);
+		}
+	}
+	return -EINVAL;
+}
+
+static int bmp280_write_oversampling_ratio_press(struct bmp280_data *data,
+					       int val)
+{
+	int i;
+	const int *avail = data->chip_info->oversampling_press_avail;
+	const int n = data->chip_info->num_oversampling_press_avail;
+
+	for (i = 0; i < n; i++) {
+		if (avail[i] == val) {
+			data->oversampling_press = ilog2(val);
+
+			return data->chip_info->chip_config(data);
+		}
+	}
+	return -EINVAL;
+}
+
+static int bmp280_write_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan,
+			    int val, int val2, long mask)
+{
+	int ret = 0;
+	struct bmp280_data *data = iio_priv(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+		mutex_lock(&data->lock);
+		switch (chan->type) {
+		case IIO_PRESSURE:
+			ret = bmp280_write_oversampling_ratio_press(data, val);
+			break;
+		case IIO_TEMP:
+			ret = bmp280_write_oversampling_ratio_temp(data, val);
+			break;
+		default:
+			ret = -EINVAL;
+			break;
+		}
+		mutex_unlock(&data->lock);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return ret;
+}
+
+static ssize_t bmp280_show_avail(char *buf, const int *vals, const int n)
+{
+	size_t len = 0;
+	int i;
+
+	for (i = 0; i < n; i++)
+		len += scnprintf(buf + len, PAGE_SIZE - len, "%d ", vals[i]);
+
+	buf[len - 1] = '\n';
+
+	return len;
+}
+
+static ssize_t bmp280_show_temp_oversampling_avail(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct bmp280_data *data = iio_priv(dev_to_iio_dev(dev));
+
+	return bmp280_show_avail(buf, data->chip_info->oversampling_temp_avail,
+				 data->chip_info->num_oversampling_temp_avail);
+}
+
+static ssize_t bmp280_show_press_oversampling_avail(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct bmp280_data *data = iio_priv(dev_to_iio_dev(dev));
+
+	return bmp280_show_avail(buf, data->chip_info->oversampling_press_avail,
+				 data->chip_info->num_oversampling_press_avail);
+}
+
+static IIO_DEVICE_ATTR(in_temp_oversampling_ratio_available,
+	S_IRUGO, bmp280_show_temp_oversampling_avail, NULL, 0);
+
+static IIO_DEVICE_ATTR(in_pressure_oversampling_ratio_available,
+	S_IRUGO, bmp280_show_press_oversampling_avail, NULL, 0);
+
+static struct attribute *bmp280_attributes[] = {
+	&iio_dev_attr_in_temp_oversampling_ratio_available.dev_attr.attr,
+	&iio_dev_attr_in_pressure_oversampling_ratio_available.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group bmp280_attrs_group = {
+	.attrs = bmp280_attributes,
+};
+
 static const struct iio_info bmp280_info = {
 	.driver_module = THIS_MODULE,
 	.read_raw = &bmp280_read_raw,
+	.write_raw = &bmp280_write_raw,
+	.attrs = &bmp280_attrs_group,
 };
 
-static int bmp280_chip_init(struct bmp280_data *data)
+static int bmp280_chip_config(struct bmp280_data *data)
 {
 	int ret;
+	u8 osrs = BMP280_OSRS_TEMP_X(data->oversampling_temp + 1) |
+		  BMP280_OSRS_PRESS_X(data->oversampling_press + 1);
 
 	ret = regmap_update_bits(data->regmap, BMP280_REG_CTRL_MEAS,
 				 BMP280_OSRS_TEMP_MASK |
 				 BMP280_OSRS_PRESS_MASK |
 				 BMP280_MODE_MASK,
-				 BMP280_OSRS_TEMP_2X |
-				 BMP280_OSRS_PRESS_16X |
-				 BMP280_MODE_NORMAL);
+				 osrs | BMP280_MODE_NORMAL);
 	if (ret < 0) {
 		dev_err(&data->client->dev,
 			"failed to write ctrl_meas register\n");
@@ -344,6 +519,317 @@ static int bmp280_chip_init(struct bmp280_data *data)
 	return ret;
 }
 
+static const int bmp280_oversampling_avail[] = { 1, 2, 4, 8, 16 };
+
+static const struct bmp280_chip_info bmp280_chip_info = {
+	.regmap_config = &bmp280_regmap_config,
+
+	.oversampling_temp_avail = bmp280_oversampling_avail,
+	.num_oversampling_temp_avail = ARRAY_SIZE(bmp280_oversampling_avail),
+
+	.oversampling_press_avail = bmp280_oversampling_avail,
+	.num_oversampling_press_avail = ARRAY_SIZE(bmp280_oversampling_avail),
+
+	.chip_config = bmp280_chip_config,
+	.read_temp = bmp280_read_temp,
+	.read_press = bmp280_read_press,
+};
+
+static bool bmp180_is_writeable_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case BMP280_REG_CTRL_MEAS:
+	case BMP280_REG_RESET:
+		return true;
+	default:
+		return false;
+	};
+}
+
+static bool bmp180_is_volatile_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case BMP180_REG_OUT_XLSB:
+	case BMP180_REG_OUT_LSB:
+	case BMP180_REG_OUT_MSB:
+	case BMP280_REG_CTRL_MEAS:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static const struct regmap_config bmp180_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = BMP180_REG_OUT_XLSB,
+	.cache_type = REGCACHE_RBTREE,
+
+	.writeable_reg = bmp180_is_writeable_reg,
+	.volatile_reg = bmp180_is_volatile_reg,
+};
+
+static int bmp180_measure(struct bmp280_data *data, u8 ctrl_meas)
+{
+	int ret;
+	const int conversion_time_max[] = { 4500, 7500, 13500, 25500 };
+	unsigned int delay_us;
+	unsigned int ctrl;
+
+	ret = regmap_write(data->regmap, BMP280_REG_CTRL_MEAS, ctrl_meas);
+	if (ret)
+		return ret;
+
+	if (ctrl_meas == BMP180_MEAS_TEMP)
+		delay_us = 4500;
+	else
+		delay_us = conversion_time_max[data->oversampling_press];
+
+	usleep_range(delay_us, delay_us + 1000);
+
+	ret = regmap_read(data->regmap, BMP280_REG_CTRL_MEAS, &ctrl);
+	if (ret)
+		return ret;
+
+	/* The value of this bit reset to "0" after conversion is complete */
+	if (ctrl & BMP180_MEAS_SCO)
+		return -EIO;
+
+	return 0;
+}
+
+static int bmp180_read_adc_temp(struct bmp280_data *data, int *val)
+{
+	int ret;
+	__be16 tmp = 0;
+
+	ret = bmp180_measure(data, BMP180_MEAS_TEMP);
+	if (ret)
+		return ret;
+
+	ret = regmap_bulk_read(data->regmap, BMP180_REG_OUT_MSB, (u8 *)&tmp, 2);
+	if (ret)
+		return ret;
+
+	*val = be16_to_cpu(tmp);
+
+	return 0;
+}
+
+/*
+ * These enums are used for indexing into the array of calibration
+ * coefficients for BMP180.
+ */
+enum { AC1, AC2, AC3, AC4, AC5, AC6, B1, B2, MB, MC, MD };
+
+struct bmp180_calib {
+	s16 AC1;
+	s16 AC2;
+	s16 AC3;
+	u16 AC4;
+	u16 AC5;
+	u16 AC6;
+	s16 B1;
+	s16 B2;
+	s16 MB;
+	s16 MC;
+	s16 MD;
+};
+
+static int bmp180_read_calib(struct bmp280_data *data,
+			     struct bmp180_calib *calib)
+{
+	int ret;
+	int i;
+	__be16 buf[BMP180_REG_CALIB_COUNT / 2];
+
+	ret = regmap_bulk_read(data->regmap, BMP180_REG_CALIB_START, buf,
+			       sizeof(buf));
+
+	if (ret < 0)
+		return ret;
+
+	/* None of the words has the value 0 or 0xFFFF */
+	for (i = 0; i < ARRAY_SIZE(buf); i++) {
+		if (buf[i] == cpu_to_be16(0) || buf[i] == cpu_to_be16(0xffff))
+			return -EIO;
+	}
+
+	calib->AC1 = be16_to_cpu(buf[AC1]);
+	calib->AC2 = be16_to_cpu(buf[AC2]);
+	calib->AC3 = be16_to_cpu(buf[AC3]);
+	calib->AC4 = be16_to_cpu(buf[AC4]);
+	calib->AC5 = be16_to_cpu(buf[AC5]);
+	calib->AC6 = be16_to_cpu(buf[AC6]);
+	calib->B1 = be16_to_cpu(buf[B1]);
+	calib->B2 = be16_to_cpu(buf[B2]);
+	calib->MB = be16_to_cpu(buf[MB]);
+	calib->MC = be16_to_cpu(buf[MC]);
+	calib->MD = be16_to_cpu(buf[MD]);
+
+	return 0;
+}
+
+/*
+ * Returns temperature in DegC, resolution is 0.1 DegC.
+ * t_fine carries fine temperature as global value.
+ *
+ * Taken from datasheet, Section 3.5, "Calculating pressure and temperature".
+ */
+static s32 bmp180_compensate_temp(struct bmp280_data *data, s32 adc_temp)
+{
+	int ret;
+	s32 x1, x2;
+	struct bmp180_calib calib;
+
+	ret = bmp180_read_calib(data, &calib);
+	if (ret < 0) {
+		dev_err(&data->client->dev,
+			"failed to read calibration coefficients\n");
+		return ret;
+	}
+
+	x1 = ((adc_temp - calib.AC6) * calib.AC5) >> 15;
+	x2 = (calib.MC << 11) / (x1 + calib.MD);
+	data->t_fine = x1 + x2;
+
+	return (data->t_fine + 8) >> 4;
+}
+
+static int bmp180_read_temp(struct bmp280_data *data, int *val)
+{
+	int ret;
+	s32 adc_temp, comp_temp;
+
+	ret = bmp180_read_adc_temp(data, &adc_temp);
+	if (ret)
+		return ret;
+
+	comp_temp = bmp180_compensate_temp(data, adc_temp);
+
+	/*
+	 * val might be NULL if we're called by the read_press routine,
+	 * who only cares about the carry over t_fine value.
+	 */
+	if (val) {
+		*val = comp_temp * 100;
+		return IIO_VAL_INT;
+	}
+
+	return 0;
+}
+
+static int bmp180_read_adc_press(struct bmp280_data *data, int *val)
+{
+	int ret;
+	__be32 tmp = 0;
+	u8 oss = data->oversampling_press;
+
+	ret = bmp180_measure(data, BMP180_MEAS_PRESS_X(oss));
+	if (ret)
+		return ret;
+
+	ret = regmap_bulk_read(data->regmap, BMP180_REG_OUT_MSB, (u8 *)&tmp, 3);
+	if (ret)
+		return ret;
+
+	*val = (be32_to_cpu(tmp) >> 8) >> (8 - oss);
+
+	return 0;
+}
+
+/*
+ * Returns pressure in Pa, resolution is 1 Pa.
+ *
+ * Taken from datasheet, Section 3.5, "Calculating pressure and temperature".
+ */
+static u32 bmp180_compensate_press(struct bmp280_data *data, s32 adc_press)
+{
+	int ret;
+	s32 x1, x2, x3, p;
+	s32 b3, b6;
+	u32 b4, b7;
+	s32 oss = data->oversampling_press;
+	struct bmp180_calib calib;
+
+	ret = bmp180_read_calib(data, &calib);
+	if (ret < 0) {
+		dev_err(&data->client->dev,
+			"failed to read calibration coefficients\n");
+		return ret;
+	}
+
+	b6 = data->t_fine - 4000;
+	x1 = (calib.B2 * (b6 * b6 >> 12)) >> 11;
+	x2 = calib.AC2 * b6 >> 11;
+	x3 = x1 + x2;
+	b3 = ((((s32)calib.AC1 * 4 + x3) << oss) + 2) / 4;
+	x1 = calib.AC3 * b6 >> 13;
+	x2 = (calib.B1 * ((b6 * b6) >> 12)) >> 16;
+	x3 = (x1 + x2 + 2) >> 2;
+	b4 = calib.AC4 * (u32)(x3 + 32768) >> 15;
+	b7 = ((u32)adc_press - b3) * (50000 >> oss);
+	if (b7 < 0x80000000)
+		p = (b7 * 2) / b4;
+	else
+		p = (b7 / b4) * 2;
+
+	x1 = (p >> 8) * (p >> 8);
+	x1 = (x1 * 3038) >> 16;
+	x2 = (-7357 * p) >> 16;
+
+	return p + ((x1 + x2 + 3791) >> 4);
+}
+
+static int bmp180_read_press(struct bmp280_data *data,
+			     int *val, int *val2)
+{
+	int ret;
+	s32 adc_press;
+	u32 comp_press;
+
+	/* Read and compensate temperature so we get a reading of t_fine. */
+	ret = bmp180_read_temp(data, NULL);
+	if (ret)
+		return ret;
+
+	ret = bmp180_read_adc_press(data, &adc_press);
+	if (ret)
+		return ret;
+
+	comp_press = bmp180_compensate_press(data, adc_press);
+
+	*val = comp_press;
+	*val2 = 1000;
+
+	return IIO_VAL_FRACTIONAL;
+}
+
+static int bmp180_chip_config(struct bmp280_data *data)
+{
+	return 0;
+}
+
+static const int bmp180_oversampling_temp_avail[] = { 1 };
+static const int bmp180_oversampling_press_avail[] = { 1, 2, 4, 8 };
+
+static const struct bmp280_chip_info bmp180_chip_info = {
+	.regmap_config = &bmp180_regmap_config,
+
+	.oversampling_temp_avail = bmp180_oversampling_temp_avail,
+	.num_oversampling_temp_avail =
+		ARRAY_SIZE(bmp180_oversampling_temp_avail),
+
+	.oversampling_press_avail = bmp180_oversampling_press_avail,
+	.num_oversampling_press_avail =
+		ARRAY_SIZE(bmp180_oversampling_press_avail),
+
+	.chip_config = bmp180_chip_config,
+	.read_temp = bmp180_read_temp,
+	.read_press = bmp180_read_press,
+};
+
 static int bmp280_probe(struct i2c_client *client,
 			const struct i2c_device_id *id)
 {
@@ -367,7 +853,23 @@ static int bmp280_probe(struct i2c_client *client,
 	indio_dev->info = &bmp280_info;
 	indio_dev->modes = INDIO_DIRECT_MODE;
 
-	data->regmap = devm_regmap_init_i2c(client, &bmp280_regmap_config);
+	switch (id->driver_data) {
+	case BMP180_CHIP_ID:
+		data->chip_info = &bmp180_chip_info;
+		data->oversampling_press = ilog2(8);
+		data->oversampling_temp = ilog2(1);
+		break;
+	case BMP280_CHIP_ID:
+		data->chip_info = &bmp280_chip_info;
+		data->oversampling_press = ilog2(16);
+		data->oversampling_temp = ilog2(2);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	data->regmap = devm_regmap_init_i2c(client,
+					data->chip_info->regmap_config);
 	if (IS_ERR(data->regmap)) {
 		dev_err(&client->dev, "failed to allocate register map\n");
 		return PTR_ERR(data->regmap);
@@ -376,13 +878,13 @@ static int bmp280_probe(struct i2c_client *client,
 	ret = regmap_read(data->regmap, BMP280_REG_ID, &chip_id);
 	if (ret < 0)
 		return ret;
-	if (chip_id != BMP280_CHIP_ID) {
-		dev_err(&client->dev, "bad chip id.  expected %x got %x\n",
-			BMP280_CHIP_ID, chip_id);
+	if (chip_id != id->driver_data) {
+		dev_err(&client->dev, "bad chip id.  expected %lx got %x\n",
+			id->driver_data, chip_id);
 		return -EINVAL;
 	}
 
-	ret = bmp280_chip_init(data);
+	ret = data->chip_info->chip_config(data);
 	if (ret < 0)
 		return ret;
 
@@ -390,13 +892,17 @@ static int bmp280_probe(struct i2c_client *client,
 }
 
 static const struct acpi_device_id bmp280_acpi_match[] = {
-	{"BMP0280", 0},
+	{"BMP0280", BMP280_CHIP_ID },
+	{"BMP0180", BMP180_CHIP_ID },
+	{"BMP0085", BMP180_CHIP_ID },
 	{ },
 };
 MODULE_DEVICE_TABLE(acpi, bmp280_acpi_match);
 
 static const struct i2c_device_id bmp280_id[] = {
-	{"bmp280", 0},
+	{"bmp280", BMP280_CHIP_ID },
+	{"bmp180", BMP180_CHIP_ID },
+	{"bmp085", BMP180_CHIP_ID },
 	{ },
 };
 MODULE_DEVICE_TABLE(i2c, bmp280_id);
@@ -412,5 +918,5 @@ static struct i2c_driver bmp280_driver = {
 module_i2c_driver(bmp280_driver);
 
 MODULE_AUTHOR("Vlad Dogaru <vlad.dogaru@intel.com>");
-MODULE_DESCRIPTION("Driver for Bosch Sensortec BMP280 pressure and temperature sensor");
+MODULE_DESCRIPTION("Driver for Bosch Sensortec BMP180/BMP280 pressure and temperature sensor");
 MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/pressure/hp03.c b/drivers/iio/pressure/hp03.c
new file mode 100644
index 000000000..ac76515d5
--- /dev/null
+++ b/drivers/iio/pressure/hp03.c
@@ -0,0 +1,312 @@
+/*
+ * Copyright (c) 2016 Marek Vasut <marex@denx.de>
+ *
+ * Driver for Hope RF HP03 digital temperature and pressure sensor.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define pr_fmt(fmt) "hp03: " fmt
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+/*
+ * The HP03 sensor occupies two fixed I2C addresses:
+ *  0x50 ... read-only EEPROM with calibration data
+ *  0x77 ... read-write ADC for pressure and temperature
+ */
+#define HP03_EEPROM_ADDR		0x50
+#define HP03_ADC_ADDR			0x77
+
+#define HP03_EEPROM_CX_OFFSET		0x10
+#define HP03_EEPROM_AB_OFFSET		0x1e
+#define HP03_EEPROM_CD_OFFSET		0x20
+
+#define HP03_ADC_WRITE_REG		0xff
+#define HP03_ADC_READ_REG		0xfd
+#define HP03_ADC_READ_PRESSURE		0xf0	/* D1 in datasheet */
+#define HP03_ADC_READ_TEMP		0xe8	/* D2 in datasheet */
+
+struct hp03_priv {
+	struct i2c_client	*client;
+	struct mutex		lock;
+	struct gpio_desc	*xclr_gpio;
+
+	struct i2c_client	*eeprom_client;
+	struct regmap		*eeprom_regmap;
+
+	s32			pressure;	/* kPa */
+	s32			temp;		/* Deg. C */
+};
+
+static const struct iio_chan_spec hp03_channels[] = {
+	{
+		.type = IIO_PRESSURE,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
+	},
+	{
+		.type = IIO_TEMP,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
+	},
+};
+
+static bool hp03_is_writeable_reg(struct device *dev, unsigned int reg)
+{
+	return false;
+}
+
+static bool hp03_is_volatile_reg(struct device *dev, unsigned int reg)
+{
+	return false;
+}
+
+static const struct regmap_config hp03_regmap_config = {
+	.reg_bits	= 8,
+	.val_bits	= 8,
+
+	.max_register	= HP03_EEPROM_CD_OFFSET + 1,
+	.cache_type	= REGCACHE_RBTREE,
+
+	.writeable_reg	= hp03_is_writeable_reg,
+	.volatile_reg	= hp03_is_volatile_reg,
+};
+
+static int hp03_get_temp_pressure(struct hp03_priv *priv, const u8 reg)
+{
+	int ret;
+
+	ret = i2c_smbus_write_byte_data(priv->client, HP03_ADC_WRITE_REG, reg);
+	if (ret < 0)
+		return ret;
+
+	msleep(50);	/* Wait for conversion to finish */
+
+	return i2c_smbus_read_word_data(priv->client, HP03_ADC_READ_REG);
+}
+
+static int hp03_update_temp_pressure(struct hp03_priv *priv)
+{
+	struct device *dev = &priv->client->dev;
+	u8 coefs[18];
+	u16 cx_val[7];
+	int ab_val, d1_val, d2_val, diff_val, dut, off, sens, x;
+	int i, ret;
+
+	/* Sample coefficients from EEPROM */
+	ret = regmap_bulk_read(priv->eeprom_regmap, HP03_EEPROM_CX_OFFSET,
+			       coefs, sizeof(coefs));
+	if (ret < 0) {
+		dev_err(dev, "Failed to read EEPROM (reg=%02x)\n",
+			HP03_EEPROM_CX_OFFSET);
+		return ret;
+	}
+
+	/* Sample Temperature and Pressure */
+	gpiod_set_value_cansleep(priv->xclr_gpio, 1);
+
+	ret = hp03_get_temp_pressure(priv, HP03_ADC_READ_PRESSURE);
+	if (ret < 0) {
+		dev_err(dev, "Failed to read pressure\n");
+		goto err_adc;
+	}
+	d1_val = ret;
+
+	ret = hp03_get_temp_pressure(priv, HP03_ADC_READ_TEMP);
+	if (ret < 0) {
+		dev_err(dev, "Failed to read temperature\n");
+		goto err_adc;
+	}
+	d2_val = ret;
+
+	gpiod_set_value_cansleep(priv->xclr_gpio, 0);
+
+	/* The Cx coefficients and Temp/Pressure values are MSB first. */
+	for (i = 0; i < 7; i++)
+		cx_val[i] = (coefs[2 * i] << 8) | (coefs[(2 * i) + 1] << 0);
+	d1_val = ((d1_val >> 8) & 0xff) | ((d1_val & 0xff) << 8);
+	d2_val = ((d2_val >> 8) & 0xff) | ((d2_val & 0xff) << 8);
+
+	/* Coefficient voodoo from the HP03 datasheet. */
+	if (d2_val >= cx_val[4])
+		ab_val = coefs[14];	/* A-value */
+	else
+		ab_val = coefs[15];	/* B-value */
+
+	diff_val = d2_val - cx_val[4];
+	dut = (ab_val * (diff_val >> 7) * (diff_val >> 7)) >> coefs[16];
+	dut = diff_val - dut;
+
+	off = (cx_val[1] + (((cx_val[3] - 1024) * dut) >> 14)) * 4;
+	sens = cx_val[0] + ((cx_val[2] * dut) >> 10);
+	x = ((sens * (d1_val - 7168)) >> 14) - off;
+
+	priv->pressure = ((x * 100) >> 5) + (cx_val[6] * 10);
+	priv->temp = 250 + ((dut * cx_val[5]) >> 16) - (dut >> coefs[17]);
+
+	return 0;
+
+err_adc:
+	gpiod_set_value_cansleep(priv->xclr_gpio, 0);
+	return ret;
+}
+
+static int hp03_read_raw(struct iio_dev *indio_dev,
+			 struct iio_chan_spec const *chan,
+			 int *val, int *val2, long mask)
+{
+	struct hp03_priv *priv = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&priv->lock);
+	ret = hp03_update_temp_pressure(priv);
+	mutex_unlock(&priv->lock);
+
+	if (ret)
+		return ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		switch (chan->type) {
+		case IIO_PRESSURE:
+			*val = priv->pressure;
+			return IIO_VAL_INT;
+		case IIO_TEMP:
+			*val = priv->temp;
+			return IIO_VAL_INT;
+		default:
+			return -EINVAL;
+		}
+		break;
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->type) {
+		case IIO_PRESSURE:
+			*val = 0;
+			*val2 = 1000;
+			return IIO_VAL_INT_PLUS_MICRO;
+		case IIO_TEMP:
+			*val = 10;
+			return IIO_VAL_INT;
+		default:
+			return -EINVAL;
+		}
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return -EINVAL;
+}
+
+static const struct iio_info hp03_info = {
+	.driver_module	= THIS_MODULE,
+	.read_raw	= &hp03_read_raw,
+};
+
+static int hp03_probe(struct i2c_client *client,
+		      const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+	struct iio_dev *indio_dev;
+	struct hp03_priv *priv;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*priv));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	priv = iio_priv(indio_dev);
+	priv->client = client;
+	mutex_init(&priv->lock);
+
+	indio_dev->dev.parent = dev;
+	indio_dev->name = id->name;
+	indio_dev->channels = hp03_channels;
+	indio_dev->num_channels = ARRAY_SIZE(hp03_channels);
+	indio_dev->info = &hp03_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	priv->xclr_gpio = devm_gpiod_get_index(dev, "xclr", 0, GPIOD_OUT_HIGH);
+	if (IS_ERR(priv->xclr_gpio)) {
+		dev_err(dev, "Failed to claim XCLR GPIO\n");
+		ret = PTR_ERR(priv->xclr_gpio);
+		return ret;
+	}
+
+	/*
+	 * Allocate another device for the on-sensor EEPROM,
+	 * which has it's dedicated I2C address and contains
+	 * the calibration constants for the sensor.
+	 */
+	priv->eeprom_client = i2c_new_dummy(client->adapter, HP03_EEPROM_ADDR);
+	if (!priv->eeprom_client) {
+		dev_err(dev, "New EEPROM I2C device failed\n");
+		return -ENODEV;
+	}
+
+	priv->eeprom_regmap = regmap_init_i2c(priv->eeprom_client,
+					      &hp03_regmap_config);
+	if (IS_ERR(priv->eeprom_regmap)) {
+		dev_err(dev, "Failed to allocate EEPROM regmap\n");
+		ret = PTR_ERR(priv->eeprom_regmap);
+		goto err_cleanup_eeprom_client;
+	}
+
+	ret = iio_device_register(indio_dev);
+	if (ret) {
+		dev_err(dev, "Failed to register IIO device\n");
+		goto err_cleanup_eeprom_regmap;
+	}
+
+	i2c_set_clientdata(client, indio_dev);
+
+	return 0;
+
+err_cleanup_eeprom_regmap:
+	regmap_exit(priv->eeprom_regmap);
+
+err_cleanup_eeprom_client:
+	i2c_unregister_device(priv->eeprom_client);
+	return ret;
+}
+
+static int hp03_remove(struct i2c_client *client)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(client);
+	struct hp03_priv *priv = iio_priv(indio_dev);
+
+	iio_device_unregister(indio_dev);
+	regmap_exit(priv->eeprom_regmap);
+	i2c_unregister_device(priv->eeprom_client);
+
+	return 0;
+}
+
+static const struct i2c_device_id hp03_id[] = {
+	{ "hp03", 0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, hp03_id);
+
+static struct i2c_driver hp03_driver = {
+	.driver = {
+		.name	= "hp03",
+	},
+	.probe		= hp03_probe,
+	.remove		= hp03_remove,
+	.id_table	= hp03_id,
+};
+module_i2c_driver(hp03_driver);
+
+MODULE_AUTHOR("Marek Vasut <marex@denx.de>");
+MODULE_DESCRIPTION("Driver for Hope RF HP03 pressure and temperature sensor");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/pressure/hp206c.c b/drivers/iio/pressure/hp206c.c
new file mode 100644
index 000000000..90f2b6e4a
--- /dev/null
+++ b/drivers/iio/pressure/hp206c.c
@@ -0,0 +1,426 @@
+/*
+ * hp206c.c - HOPERF HP206C precision barometer and altimeter sensor
+ *
+ * Copyright (c) 2016, Intel Corporation.
+ *
+ * This file is subject to the terms and conditions of version 2 of
+ * the GNU General Public License.  See the file COPYING in the main
+ * directory of this archive for more details.
+ *
+ * (7-bit I2C slave address 0x76)
+ *
+ * Datasheet:
+ *  http://www.hoperf.com/upload/sensor/HP206C_DataSheet_EN_V2.0.pdf
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/delay.h>
+#include <linux/util_macros.h>
+#include <linux/acpi.h>
+
+/* I2C commands: */
+#define HP206C_CMD_SOFT_RST	0x06
+
+#define HP206C_CMD_ADC_CVT	0x40
+
+#define HP206C_CMD_ADC_CVT_OSR_4096	0x00
+#define HP206C_CMD_ADC_CVT_OSR_2048	0x04
+#define HP206C_CMD_ADC_CVT_OSR_1024	0x08
+#define HP206C_CMD_ADC_CVT_OSR_512	0x0c
+#define HP206C_CMD_ADC_CVT_OSR_256	0x10
+#define HP206C_CMD_ADC_CVT_OSR_128	0x14
+
+#define HP206C_CMD_ADC_CVT_CHNL_PT	0x00
+#define HP206C_CMD_ADC_CVT_CHNL_T	0x02
+
+#define HP206C_CMD_READ_P	0x30
+#define HP206C_CMD_READ_T	0x32
+
+#define HP206C_CMD_READ_REG	0x80
+#define HP206C_CMD_WRITE_REG	0xc0
+
+#define HP206C_REG_INT_EN	0x0b
+#define HP206C_REG_INT_CFG	0x0c
+
+#define HP206C_REG_INT_SRC	0x0d
+#define HP206C_FLAG_DEV_RDY	0x40
+
+#define HP206C_REG_PARA		0x0f
+#define HP206C_FLAG_CMPS_EN	0x80
+
+/* Maximum spin for DEV_RDY */
+#define HP206C_MAX_DEV_RDY_WAIT_COUNT 20
+#define HP206C_DEV_RDY_WAIT_US    20000
+
+struct hp206c_data {
+	struct mutex mutex;
+	struct i2c_client *client;
+	int temp_osr_index;
+	int pres_osr_index;
+};
+
+struct hp206c_osr_setting {
+	u8 osr_mask;
+	unsigned int temp_conv_time_us;
+	unsigned int pres_conv_time_us;
+};
+
+/* Data from Table 5 in datasheet. */
+static const struct hp206c_osr_setting hp206c_osr_settings[] = {
+	{ HP206C_CMD_ADC_CVT_OSR_4096,	65600,	131100	},
+	{ HP206C_CMD_ADC_CVT_OSR_2048,	32800,	65600	},
+	{ HP206C_CMD_ADC_CVT_OSR_1024,	16400,	32800	},
+	{ HP206C_CMD_ADC_CVT_OSR_512,	8200,	16400	},
+	{ HP206C_CMD_ADC_CVT_OSR_256,	4100,	8200	},
+	{ HP206C_CMD_ADC_CVT_OSR_128,	2100,	4100	},
+};
+static const int hp206c_osr_rates[] = { 4096, 2048, 1024, 512, 256, 128 };
+static const char hp206c_osr_rates_str[] = "4096 2048 1024 512 256 128";
+
+static inline int hp206c_read_reg(struct i2c_client *client, u8 reg)
+{
+	return i2c_smbus_read_byte_data(client, HP206C_CMD_READ_REG | reg);
+}
+
+static inline int hp206c_write_reg(struct i2c_client *client, u8 reg, u8 val)
+{
+	return i2c_smbus_write_byte_data(client,
+			HP206C_CMD_WRITE_REG | reg, val);
+}
+
+static int hp206c_read_20bit(struct i2c_client *client, u8 cmd)
+{
+	int ret;
+	u8 values[3];
+
+	ret = i2c_smbus_read_i2c_block_data(client, cmd, 3, values);
+	if (ret < 0)
+		return ret;
+	if (ret != 3)
+		return -EIO;
+	return ((values[0] & 0xF) << 16) | (values[1] << 8) | (values[2]);
+}
+
+/* Spin for max 160ms until DEV_RDY is 1, or return error. */
+static int hp206c_wait_dev_rdy(struct iio_dev *indio_dev)
+{
+	int ret;
+	int count = 0;
+	struct hp206c_data *data = iio_priv(indio_dev);
+	struct i2c_client *client = data->client;
+
+	while (++count <= HP206C_MAX_DEV_RDY_WAIT_COUNT) {
+		ret = hp206c_read_reg(client, HP206C_REG_INT_SRC);
+		if (ret < 0) {
+			dev_err(&indio_dev->dev, "Failed READ_REG INT_SRC: %d\n", ret);
+			return ret;
+		}
+		if (ret & HP206C_FLAG_DEV_RDY)
+			return 0;
+		usleep_range(HP206C_DEV_RDY_WAIT_US, HP206C_DEV_RDY_WAIT_US * 3 / 2);
+	}
+	return -ETIMEDOUT;
+}
+
+static int hp206c_set_compensation(struct i2c_client *client, bool enabled)
+{
+	int val;
+
+	val = hp206c_read_reg(client, HP206C_REG_PARA);
+	if (val < 0)
+		return val;
+	if (enabled)
+		val |= HP206C_FLAG_CMPS_EN;
+	else
+		val &= ~HP206C_FLAG_CMPS_EN;
+
+	return hp206c_write_reg(client, HP206C_REG_PARA, val);
+}
+
+/* Do a soft reset */
+static int hp206c_soft_reset(struct iio_dev *indio_dev)
+{
+	int ret;
+	struct hp206c_data *data = iio_priv(indio_dev);
+	struct i2c_client *client = data->client;
+
+	ret = i2c_smbus_write_byte(client, HP206C_CMD_SOFT_RST);
+	if (ret) {
+		dev_err(&client->dev, "Failed to reset device: %d\n", ret);
+		return ret;
+	}
+
+	usleep_range(400, 600);
+
+	ret = hp206c_wait_dev_rdy(indio_dev);
+	if (ret) {
+		dev_err(&client->dev, "Device not ready after soft reset: %d\n", ret);
+		return ret;
+	}
+
+	ret = hp206c_set_compensation(client, true);
+	if (ret)
+		dev_err(&client->dev, "Failed to enable compensation: %d\n", ret);
+	return ret;
+}
+
+static int hp206c_conv_and_read(struct iio_dev *indio_dev,
+				u8 conv_cmd, u8 read_cmd,
+				unsigned int sleep_us)
+{
+	int ret;
+	struct hp206c_data *data = iio_priv(indio_dev);
+	struct i2c_client *client = data->client;
+
+	ret = hp206c_wait_dev_rdy(indio_dev);
+	if (ret < 0) {
+		dev_err(&indio_dev->dev, "Device not ready: %d\n", ret);
+		return ret;
+	}
+
+	ret = i2c_smbus_write_byte(client, conv_cmd);
+	if (ret < 0) {
+		dev_err(&indio_dev->dev, "Failed convert: %d\n", ret);
+		return ret;
+	}
+
+	usleep_range(sleep_us, sleep_us * 3 / 2);
+
+	ret = hp206c_wait_dev_rdy(indio_dev);
+	if (ret < 0) {
+		dev_err(&indio_dev->dev, "Device not ready: %d\n", ret);
+		return ret;
+	}
+
+	ret = hp206c_read_20bit(client, read_cmd);
+	if (ret < 0)
+		dev_err(&indio_dev->dev, "Failed read: %d\n", ret);
+
+	return ret;
+}
+
+static int hp206c_read_raw(struct iio_dev *indio_dev,
+			   struct iio_chan_spec const *chan, int *val,
+			   int *val2, long mask)
+{
+	int ret;
+	struct hp206c_data *data = iio_priv(indio_dev);
+	const struct hp206c_osr_setting *osr_setting;
+	u8 conv_cmd;
+
+	mutex_lock(&data->mutex);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+		switch (chan->type) {
+		case IIO_TEMP:
+			*val = hp206c_osr_rates[data->temp_osr_index];
+			ret = IIO_VAL_INT;
+			break;
+
+		case IIO_PRESSURE:
+			*val = hp206c_osr_rates[data->pres_osr_index];
+			ret = IIO_VAL_INT;
+			break;
+		default:
+			ret = -EINVAL;
+		}
+		break;
+
+	case IIO_CHAN_INFO_RAW:
+		switch (chan->type) {
+		case IIO_TEMP:
+			osr_setting = &hp206c_osr_settings[data->temp_osr_index];
+			conv_cmd = HP206C_CMD_ADC_CVT |
+					osr_setting->osr_mask |
+					HP206C_CMD_ADC_CVT_CHNL_T;
+			ret = hp206c_conv_and_read(indio_dev,
+					conv_cmd,
+					HP206C_CMD_READ_T,
+					osr_setting->temp_conv_time_us);
+			if (ret >= 0) {
+				/* 20 significant bits are provided.
+				 * Extend sign over the rest.
+				 */
+				*val = sign_extend32(ret, 19);
+				ret = IIO_VAL_INT;
+			}
+			break;
+
+		case IIO_PRESSURE:
+			osr_setting = &hp206c_osr_settings[data->pres_osr_index];
+			conv_cmd = HP206C_CMD_ADC_CVT |
+					osr_setting->osr_mask |
+					HP206C_CMD_ADC_CVT_CHNL_PT;
+			ret = hp206c_conv_and_read(indio_dev,
+					conv_cmd,
+					HP206C_CMD_READ_P,
+					osr_setting->pres_conv_time_us);
+			if (ret >= 0) {
+				*val = ret;
+				ret = IIO_VAL_INT;
+			}
+			break;
+		default:
+			ret = -EINVAL;
+		}
+		break;
+
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->type) {
+		case IIO_TEMP:
+			*val = 0;
+			*val2 = 10000;
+			ret = IIO_VAL_INT_PLUS_MICRO;
+			break;
+
+		case IIO_PRESSURE:
+			*val = 0;
+			*val2 = 1000;
+			ret = IIO_VAL_INT_PLUS_MICRO;
+			break;
+		default:
+			ret = -EINVAL;
+		}
+		break;
+
+	default:
+		ret = -EINVAL;
+	}
+
+	mutex_unlock(&data->mutex);
+	return ret;
+}
+
+static int hp206c_write_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan,
+			    int val, int val2, long mask)
+{
+	int ret = 0;
+	struct hp206c_data *data = iio_priv(indio_dev);
+
+	if (mask != IIO_CHAN_INFO_OVERSAMPLING_RATIO)
+		return -EINVAL;
+	mutex_lock(&data->mutex);
+	switch (chan->type) {
+	case IIO_TEMP:
+		data->temp_osr_index = find_closest_descending(val,
+			hp206c_osr_rates, ARRAY_SIZE(hp206c_osr_rates));
+		break;
+	case IIO_PRESSURE:
+		data->pres_osr_index = find_closest_descending(val,
+			hp206c_osr_rates, ARRAY_SIZE(hp206c_osr_rates));
+		break;
+	default:
+		ret = -EINVAL;
+	}
+	mutex_unlock(&data->mutex);
+	return ret;
+}
+
+static const struct iio_chan_spec hp206c_channels[] = {
+	{
+		.type = IIO_TEMP,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+				      BIT(IIO_CHAN_INFO_SCALE) |
+				      BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
+	},
+	{
+		.type = IIO_PRESSURE,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+				      BIT(IIO_CHAN_INFO_SCALE) |
+				      BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
+	}
+};
+
+static IIO_CONST_ATTR_SAMP_FREQ_AVAIL(hp206c_osr_rates_str);
+
+static struct attribute *hp206c_attributes[] = {
+	&iio_const_attr_sampling_frequency_available.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group hp206c_attribute_group = {
+	.attrs = hp206c_attributes,
+};
+
+static const struct iio_info hp206c_info = {
+	.attrs = &hp206c_attribute_group,
+	.read_raw = hp206c_read_raw,
+	.write_raw = hp206c_write_raw,
+	.driver_module = THIS_MODULE,
+};
+
+static int hp206c_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct iio_dev *indio_dev;
+	struct hp206c_data *data;
+	int ret;
+
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_BYTE |
+				     I2C_FUNC_SMBUS_BYTE_DATA |
+				     I2C_FUNC_SMBUS_READ_I2C_BLOCK)) {
+		dev_err(&client->dev, "Adapter does not support "
+				"all required i2c functionality\n");
+		return -ENODEV;
+	}
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	data = iio_priv(indio_dev);
+	data->client = client;
+	mutex_init(&data->mutex);
+
+	indio_dev->info = &hp206c_info;
+	indio_dev->name = id->name;
+	indio_dev->dev.parent = &client->dev;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = hp206c_channels;
+	indio_dev->num_channels = ARRAY_SIZE(hp206c_channels);
+
+	i2c_set_clientdata(client, indio_dev);
+
+	/* Do a soft reset on probe */
+	ret = hp206c_soft_reset(indio_dev);
+	if (ret) {
+		dev_err(&client->dev, "Failed to reset on startup: %d\n", ret);
+		return -ENODEV;
+	}
+
+	return devm_iio_device_register(&client->dev, indio_dev);
+}
+
+static const struct i2c_device_id hp206c_id[] = {
+	{"hp206c"},
+	{}
+};
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id hp206c_acpi_match[] = {
+	{"HOP206C", 0},
+	{ },
+};
+MODULE_DEVICE_TABLE(acpi, hp206c_acpi_match);
+#endif
+
+static struct i2c_driver hp206c_driver = {
+	.probe = hp206c_probe,
+	.id_table = hp206c_id,
+	.driver = {
+		.name = "hp206c",
+		.acpi_match_table = ACPI_PTR(hp206c_acpi_match),
+	},
+};
+
+module_i2c_driver(hp206c_driver);
+
+MODULE_DESCRIPTION("HOPERF HP206C precision barometer and altimeter sensor");
+MODULE_AUTHOR("Leonard Crestez <leonard.crestez@intel.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/pressure/ms5611.h b/drivers/iio/pressure/ms5611.h
index 8b08e4b7e..ccda63c5b 100644
--- a/drivers/iio/pressure/ms5611.h
+++ b/drivers/iio/pressure/ms5611.h
@@ -16,15 +16,11 @@
 #include <linux/iio/iio.h>
 #include <linux/mutex.h>
 
+struct regulator;
+
 #define MS5611_RESET			0x1e
 #define MS5611_READ_ADC			0x00
 #define MS5611_READ_PROM_WORD		0xA0
-#define MS5611_START_TEMP_CONV		0x58
-#define MS5611_START_PRESSURE_CONV	0x48
-
-#define MS5611_CONV_TIME_MIN		9040
-#define MS5611_CONV_TIME_MAX		10000
-
 #define MS5611_PROM_WORDS_NB		8
 
 enum {
@@ -39,16 +35,31 @@ struct ms5611_chip_info {
 					    s32 *temp, s32 *pressure);
 };
 
+/*
+ * OverSampling Rate descriptor.
+ * Warning: cmd MUST be kept aligned on a word boundary (see
+ * m5611_spi_read_adc_temp_and_pressure in ms5611_spi.c).
+ */
+struct ms5611_osr {
+	unsigned long conv_usec;
+	u8 cmd;
+	unsigned short rate;
+};
+
 struct ms5611_state {
 	void *client;
 	struct mutex lock;
 
+	const struct ms5611_osr *pressure_osr;
+	const struct ms5611_osr *temp_osr;
+
 	int (*reset)(struct device *dev);
 	int (*read_prom_word)(struct device *dev, int index, u16 *word);
 	int (*read_adc_temp_and_pressure)(struct device *dev,
 					  s32 *temp, s32 *pressure);
 
 	struct ms5611_chip_info *chip_info;
+	struct regulator *vdd;
 };
 
 int ms5611_probe(struct iio_dev *indio_dev, struct device *dev,
diff --git a/drivers/iio/pressure/ms5611_core.c b/drivers/iio/pressure/ms5611_core.c
index 992ad8d3b..76578b07b 100644
--- a/drivers/iio/pressure/ms5611_core.c
+++ b/drivers/iio/pressure/ms5611_core.c
@@ -18,11 +18,44 @@
 #include <linux/delay.h>
 #include <linux/regulator/consumer.h>
 
+#include <linux/iio/sysfs.h>
 #include <linux/iio/buffer.h>
 #include <linux/iio/triggered_buffer.h>
 #include <linux/iio/trigger_consumer.h>
 #include "ms5611.h"
 
+#define MS5611_INIT_OSR(_cmd, _conv_usec, _rate) \
+	{ .cmd = _cmd, .conv_usec = _conv_usec, .rate = _rate }
+
+static const struct ms5611_osr ms5611_avail_pressure_osr[] = {
+	MS5611_INIT_OSR(0x40, 600,  256),
+	MS5611_INIT_OSR(0x42, 1170, 512),
+	MS5611_INIT_OSR(0x44, 2280, 1024),
+	MS5611_INIT_OSR(0x46, 4540, 2048),
+	MS5611_INIT_OSR(0x48, 9040, 4096)
+};
+
+static const struct ms5611_osr ms5611_avail_temp_osr[] = {
+	MS5611_INIT_OSR(0x50, 600,  256),
+	MS5611_INIT_OSR(0x52, 1170, 512),
+	MS5611_INIT_OSR(0x54, 2280, 1024),
+	MS5611_INIT_OSR(0x56, 4540, 2048),
+	MS5611_INIT_OSR(0x58, 9040, 4096)
+};
+
+static const char ms5611_show_osr[] = "256 512 1024 2048 4096";
+
+static IIO_CONST_ATTR(oversampling_ratio_available, ms5611_show_osr);
+
+static struct attribute *ms5611_attributes[] = {
+	&iio_const_attr_oversampling_ratio_available.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group ms5611_attribute_group = {
+	.attrs = ms5611_attributes,
+};
+
 static bool ms5611_prom_is_valid(u16 *prom, size_t len)
 {
 	int i, j;
@@ -239,11 +272,70 @@ static int ms5611_read_raw(struct iio_dev *indio_dev,
 		default:
 			return -EINVAL;
 		}
+	case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+		if (chan->type != IIO_TEMP && chan->type != IIO_PRESSURE)
+			break;
+		mutex_lock(&st->lock);
+		if (chan->type == IIO_TEMP)
+			*val = (int)st->temp_osr->rate;
+		else
+			*val = (int)st->pressure_osr->rate;
+		mutex_unlock(&st->lock);
+		return IIO_VAL_INT;
 	}
 
 	return -EINVAL;
 }
 
+static const struct ms5611_osr *ms5611_find_osr(int rate,
+						const struct ms5611_osr *osr,
+						size_t count)
+{
+	unsigned int r;
+
+	for (r = 0; r < count; r++)
+		if ((unsigned short)rate == osr[r].rate)
+			break;
+	if (r >= count)
+		return NULL;
+	return &osr[r];
+}
+
+static int ms5611_write_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan,
+			    int val, int val2, long mask)
+{
+	struct ms5611_state *st = iio_priv(indio_dev);
+	const struct ms5611_osr *osr = NULL;
+
+	if (mask != IIO_CHAN_INFO_OVERSAMPLING_RATIO)
+		return -EINVAL;
+
+	if (chan->type == IIO_TEMP)
+		osr = ms5611_find_osr(val, ms5611_avail_temp_osr,
+				      ARRAY_SIZE(ms5611_avail_temp_osr));
+	else if (chan->type == IIO_PRESSURE)
+		osr = ms5611_find_osr(val, ms5611_avail_pressure_osr,
+				      ARRAY_SIZE(ms5611_avail_pressure_osr));
+	if (!osr)
+		return -EINVAL;
+
+	mutex_lock(&st->lock);
+
+	if (iio_buffer_enabled(indio_dev)) {
+		mutex_unlock(&st->lock);
+		return -EBUSY;
+	}
+
+	if (chan->type == IIO_TEMP)
+		st->temp_osr = osr;
+	else
+		st->pressure_osr = osr;
+
+	mutex_unlock(&st->lock);
+	return 0;
+}
+
 static const unsigned long ms5611_scan_masks[] = {0x3, 0};
 
 static struct ms5611_chip_info chip_info_tbl[] = {
@@ -259,7 +351,8 @@ static const struct iio_chan_spec ms5611_channels[] = {
 	{
 		.type = IIO_PRESSURE,
 		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) |
-			BIT(IIO_CHAN_INFO_SCALE),
+			BIT(IIO_CHAN_INFO_SCALE) |
+			BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
 		.scan_index = 0,
 		.scan_type = {
 			.sign = 's',
@@ -271,7 +364,8 @@ static const struct iio_chan_spec ms5611_channels[] = {
 	{
 		.type = IIO_TEMP,
 		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) |
-			BIT(IIO_CHAN_INFO_SCALE),
+			BIT(IIO_CHAN_INFO_SCALE) |
+			BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
 		.scan_index = 1,
 		.scan_type = {
 			.sign = 's',
@@ -285,40 +379,68 @@ static const struct iio_chan_spec ms5611_channels[] = {
 
 static const struct iio_info ms5611_info = {
 	.read_raw = &ms5611_read_raw,
+	.write_raw = &ms5611_write_raw,
+	.attrs = &ms5611_attribute_group,
 	.driver_module = THIS_MODULE,
 };
 
 static int ms5611_init(struct iio_dev *indio_dev)
 {
 	int ret;
-	struct regulator *vdd = devm_regulator_get(indio_dev->dev.parent,
-	                                           "vdd");
+	struct ms5611_state *st = iio_priv(indio_dev);
 
 	/* Enable attached regulator if any. */
-	if (!IS_ERR(vdd)) {
-		ret = regulator_enable(vdd);
+	st->vdd = devm_regulator_get(indio_dev->dev.parent, "vdd");
+	if (!IS_ERR(st->vdd)) {
+		ret = regulator_enable(st->vdd);
 		if (ret) {
 			dev_err(indio_dev->dev.parent,
-			        "failed to enable Vdd supply: %d\n", ret);
+				"failed to enable Vdd supply: %d\n", ret);
 			return ret;
 		}
+	} else {
+		ret = PTR_ERR(st->vdd);
+		if (ret != -ENODEV)
+			return ret;
 	}
 
 	ret = ms5611_reset(indio_dev);
 	if (ret < 0)
-		return ret;
+		goto err_regulator_disable;
 
-	return ms5611_read_prom(indio_dev);
+	ret = ms5611_read_prom(indio_dev);
+	if (ret < 0)
+		goto err_regulator_disable;
+
+	return 0;
+
+err_regulator_disable:
+	if (!IS_ERR_OR_NULL(st->vdd))
+		regulator_disable(st->vdd);
+	return ret;
+}
+
+static void ms5611_fini(const struct iio_dev *indio_dev)
+{
+	const struct ms5611_state *st = iio_priv(indio_dev);
+
+	if (!IS_ERR_OR_NULL(st->vdd))
+		regulator_disable(st->vdd);
 }
 
 int ms5611_probe(struct iio_dev *indio_dev, struct device *dev,
-                 const char *name, int type)
+		 const char *name, int type)
 {
 	int ret;
 	struct ms5611_state *st = iio_priv(indio_dev);
 
 	mutex_init(&st->lock);
 	st->chip_info = &chip_info_tbl[type];
+	st->temp_osr =
+		&ms5611_avail_temp_osr[ARRAY_SIZE(ms5611_avail_temp_osr) - 1];
+	st->pressure_osr =
+		&ms5611_avail_pressure_osr[ARRAY_SIZE(ms5611_avail_pressure_osr)
+					   - 1];
 	indio_dev->dev.parent = dev;
 	indio_dev->name = name;
 	indio_dev->info = &ms5611_info;
@@ -335,7 +457,7 @@ int ms5611_probe(struct iio_dev *indio_dev, struct device *dev,
 					 ms5611_trigger_handler, NULL);
 	if (ret < 0) {
 		dev_err(dev, "iio triggered buffer setup failed\n");
-		return ret;
+		goto err_fini;
 	}
 
 	ret = iio_device_register(indio_dev);
@@ -348,7 +470,8 @@ int ms5611_probe(struct iio_dev *indio_dev, struct device *dev,
 
 err_buffer_cleanup:
 	iio_triggered_buffer_cleanup(indio_dev);
-
+err_fini:
+	ms5611_fini(indio_dev);
 	return ret;
 }
 EXPORT_SYMBOL(ms5611_probe);
@@ -357,6 +480,7 @@ int ms5611_remove(struct iio_dev *indio_dev)
 {
 	iio_device_unregister(indio_dev);
 	iio_triggered_buffer_cleanup(indio_dev);
+	ms5611_fini(indio_dev);
 
 	return 0;
 }
diff --git a/drivers/iio/pressure/ms5611_i2c.c b/drivers/iio/pressure/ms5611_i2c.c
index 7f6fc8eee..55fb5fc0b 100644
--- a/drivers/iio/pressure/ms5611_i2c.c
+++ b/drivers/iio/pressure/ms5611_i2c.c
@@ -17,6 +17,7 @@
 #include <linux/delay.h>
 #include <linux/i2c.h>
 #include <linux/module.h>
+#include <linux/of_device.h>
 
 #include "ms5611.h"
 
@@ -62,23 +63,23 @@ static int ms5611_i2c_read_adc_temp_and_pressure(struct device *dev,
 {
 	int ret;
 	struct ms5611_state *st = iio_priv(dev_to_iio_dev(dev));
+	const struct ms5611_osr *osr = st->temp_osr;
 
-	ret = i2c_smbus_write_byte(st->client, MS5611_START_TEMP_CONV);
+	ret = i2c_smbus_write_byte(st->client, osr->cmd);
 	if (ret < 0)
 		return ret;
 
-	usleep_range(MS5611_CONV_TIME_MIN, MS5611_CONV_TIME_MAX);
-
+	usleep_range(osr->conv_usec, osr->conv_usec + (osr->conv_usec / 10UL));
 	ret = ms5611_i2c_read_adc(st, temp);
 	if (ret < 0)
 		return ret;
 
-	ret = i2c_smbus_write_byte(st->client, MS5611_START_PRESSURE_CONV);
+	osr = st->pressure_osr;
+	ret = i2c_smbus_write_byte(st->client, osr->cmd);
 	if (ret < 0)
 		return ret;
 
-	usleep_range(MS5611_CONV_TIME_MIN, MS5611_CONV_TIME_MAX);
-
+	usleep_range(osr->conv_usec, osr->conv_usec + (osr->conv_usec / 10UL));
 	return ms5611_i2c_read_adc(st, pressure);
 }
 
@@ -113,6 +114,17 @@ static int ms5611_i2c_remove(struct i2c_client *client)
 	return ms5611_remove(i2c_get_clientdata(client));
 }
 
+#if defined(CONFIG_OF)
+static const struct of_device_id ms5611_i2c_matches[] = {
+	{ .compatible = "meas,ms5611" },
+	{ .compatible = "ms5611" },
+	{ .compatible = "meas,ms5607" },
+	{ .compatible = "ms5607" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ms5611_i2c_matches);
+#endif
+
 static const struct i2c_device_id ms5611_id[] = {
 	{ "ms5611", MS5611 },
 	{ "ms5607", MS5607 },
@@ -123,6 +135,7 @@ MODULE_DEVICE_TABLE(i2c, ms5611_id);
 static struct i2c_driver ms5611_driver = {
 	.driver = {
 		.name = "ms5611",
+		.of_match_table = of_match_ptr(ms5611_i2c_matches)
 	},
 	.id_table = ms5611_id,
 	.probe = ms5611_i2c_probe,
diff --git a/drivers/iio/pressure/ms5611_spi.c b/drivers/iio/pressure/ms5611_spi.c
index 5cc009e85..932e05001 100644
--- a/drivers/iio/pressure/ms5611_spi.c
+++ b/drivers/iio/pressure/ms5611_spi.c
@@ -12,6 +12,7 @@
 #include <linux/delay.h>
 #include <linux/module.h>
 #include <linux/spi/spi.h>
+#include <linux/of_device.h>
 
 #include "ms5611.h"
 
@@ -55,28 +56,29 @@ static int ms5611_spi_read_adc(struct device *dev, s32 *val)
 static int ms5611_spi_read_adc_temp_and_pressure(struct device *dev,
 						 s32 *temp, s32 *pressure)
 {
-	u8 cmd;
 	int ret;
 	struct ms5611_state *st = iio_priv(dev_to_iio_dev(dev));
+	const struct ms5611_osr *osr = st->temp_osr;
 
-	cmd = MS5611_START_TEMP_CONV;
-	ret = spi_write_then_read(st->client, &cmd, 1, NULL, 0);
+	/*
+	 * Warning: &osr->cmd MUST be aligned on a word boundary since used as
+	 * 2nd argument (void*) of spi_write_then_read.
+	 */
+	ret = spi_write_then_read(st->client, &osr->cmd, 1, NULL, 0);
 	if (ret < 0)
 		return ret;
 
-	usleep_range(MS5611_CONV_TIME_MIN, MS5611_CONV_TIME_MAX);
-
+	usleep_range(osr->conv_usec, osr->conv_usec + (osr->conv_usec / 10UL));
 	ret = ms5611_spi_read_adc(dev, temp);
 	if (ret < 0)
 		return ret;
 
-	cmd = MS5611_START_PRESSURE_CONV;
-	ret = spi_write_then_read(st->client, &cmd, 1, NULL, 0);
+	osr = st->pressure_osr;
+	ret = spi_write_then_read(st->client, &osr->cmd, 1, NULL, 0);
 	if (ret < 0)
 		return ret;
 
-	usleep_range(MS5611_CONV_TIME_MIN, MS5611_CONV_TIME_MAX);
-
+	usleep_range(osr->conv_usec, osr->conv_usec + (osr->conv_usec / 10UL));
 	return ms5611_spi_read_adc(dev, pressure);
 }
 
@@ -106,7 +108,7 @@ static int ms5611_spi_probe(struct spi_device *spi)
 	st->client = spi;
 
 	return ms5611_probe(indio_dev, &spi->dev, spi_get_device_id(spi)->name,
-	                    spi_get_device_id(spi)->driver_data);
+			    spi_get_device_id(spi)->driver_data);
 }
 
 static int ms5611_spi_remove(struct spi_device *spi)
@@ -114,6 +116,17 @@ static int ms5611_spi_remove(struct spi_device *spi)
 	return ms5611_remove(spi_get_drvdata(spi));
 }
 
+#if defined(CONFIG_OF)
+static const struct of_device_id ms5611_spi_matches[] = {
+	{ .compatible = "meas,ms5611" },
+	{ .compatible = "ms5611" },
+	{ .compatible = "meas,ms5607" },
+	{ .compatible = "ms5607" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ms5611_spi_matches);
+#endif
+
 static const struct spi_device_id ms5611_id[] = {
 	{ "ms5611", MS5611 },
 	{ "ms5607", MS5607 },
@@ -124,6 +137,7 @@ MODULE_DEVICE_TABLE(spi, ms5611_id);
 static struct spi_driver ms5611_driver = {
 	.driver = {
 		.name = "ms5611",
+		.of_match_table = of_match_ptr(ms5611_spi_matches)
 	},
 	.id_table = ms5611_id,
 	.probe = ms5611_spi_probe,
diff --git a/drivers/iio/pressure/st_pressure_buffer.c b/drivers/iio/pressure/st_pressure_buffer.c
index 2ff53f222..99468d0a6 100644
--- a/drivers/iio/pressure/st_pressure_buffer.c
+++ b/drivers/iio/pressure/st_pressure_buffer.c
@@ -82,7 +82,7 @@ static const struct iio_buffer_setup_ops st_press_buffer_setup_ops = {
 
 int st_press_allocate_ring(struct iio_dev *indio_dev)
 {
-	return iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
+	return iio_triggered_buffer_setup(indio_dev, NULL,
 		&st_sensors_trigger_handler, &st_press_buffer_setup_ops);
 }
 
diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c
index d3ca32079..92a118c3c 100644
--- a/drivers/iio/pressure/st_pressure_core.c
+++ b/drivers/iio/pressure/st_pressure_core.c
@@ -67,6 +67,8 @@
 #define ST_PRESS_LPS331AP_DRDY_IRQ_INT2_MASK	0x20
 #define ST_PRESS_LPS331AP_IHL_IRQ_ADDR		0x22
 #define ST_PRESS_LPS331AP_IHL_IRQ_MASK		0x80
+#define ST_PRESS_LPS331AP_OD_IRQ_ADDR		0x22
+#define ST_PRESS_LPS331AP_OD_IRQ_MASK		0x40
 #define ST_PRESS_LPS331AP_MULTIREAD_BIT		true
 
 /* CUSTOM VALUES FOR LPS001WP SENSOR */
@@ -109,6 +111,8 @@
 #define ST_PRESS_LPS25H_DRDY_IRQ_INT2_MASK	0x10
 #define ST_PRESS_LPS25H_IHL_IRQ_ADDR		0x22
 #define ST_PRESS_LPS25H_IHL_IRQ_MASK		0x80
+#define ST_PRESS_LPS25H_OD_IRQ_ADDR		0x22
+#define ST_PRESS_LPS25H_OD_IRQ_MASK		0x40
 #define ST_PRESS_LPS25H_MULTIREAD_BIT		true
 #define ST_PRESS_LPS25H_OUT_XL_ADDR		0x28
 #define ST_TEMP_LPS25H_OUT_L_ADDR		0x2b
@@ -235,6 +239,9 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
 			.mask_int2 = ST_PRESS_LPS331AP_DRDY_IRQ_INT2_MASK,
 			.addr_ihl = ST_PRESS_LPS331AP_IHL_IRQ_ADDR,
 			.mask_ihl = ST_PRESS_LPS331AP_IHL_IRQ_MASK,
+			.addr_od = ST_PRESS_LPS331AP_OD_IRQ_ADDR,
+			.mask_od = ST_PRESS_LPS331AP_OD_IRQ_MASK,
+			.addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
 		},
 		.multi_read_bit = ST_PRESS_LPS331AP_MULTIREAD_BIT,
 		.bootime = 2,
@@ -332,6 +339,9 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
 			.mask_int2 = ST_PRESS_LPS25H_DRDY_IRQ_INT2_MASK,
 			.addr_ihl = ST_PRESS_LPS25H_IHL_IRQ_ADDR,
 			.mask_ihl = ST_PRESS_LPS25H_IHL_IRQ_MASK,
+			.addr_od = ST_PRESS_LPS25H_OD_IRQ_ADDR,
+			.mask_od = ST_PRESS_LPS25H_OD_IRQ_MASK,
+			.addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
 		},
 		.multi_read_bit = ST_PRESS_LPS25H_MULTIREAD_BIT,
 		.bootime = 2,
@@ -435,6 +445,7 @@ static const struct iio_info press_info = {
 static const struct iio_trigger_ops st_press_trigger_ops = {
 	.owner = THIS_MODULE,
 	.set_trigger_state = ST_PRESS_TRIGGER_SET_STATE,
+	.validate_device = st_sensors_validate_device,
 };
 #define ST_PRESS_TRIGGER_OPS (&st_press_trigger_ops)
 #else