summaryrefslogtreecommitdiff
path: root/drivers/iio
diff options
context:
space:
mode:
authorAndré Fabian Silva Delgado <emulatorman@parabola.nu>2016-09-27 10:34:19 -0300
committerAndré Fabian Silva Delgado <emulatorman@parabola.nu>2016-09-27 10:34:19 -0300
commit1c29f4306f557ef5d9ed515ec8881f4d1735b058 (patch)
tree1359b9f8403af67e35bbbaae36e2b60c9bb3d2da /drivers/iio
parent5b465b045af3a649a89b8a5c5bfdece20ffc0345 (diff)
Linux-libre 4.7.5-gnupck-4.7.5-gnu
Diffstat (limited to 'drivers/iio')
-rw-r--r--drivers/iio/accel/bmc150-accel-core.c11
-rw-r--r--drivers/iio/accel/kxsd9.c2
-rw-r--r--drivers/iio/adc/Kconfig1
-rw-r--r--drivers/iio/adc/ad799x.c1
-rw-r--r--drivers/iio/adc/at91_adc.c4
-rw-r--r--drivers/iio/adc/rockchip_saradc.c30
-rw-r--r--drivers/iio/adc/ti-ads1015.c3
-rw-r--r--drivers/iio/adc/ti_am335x_adc.c16
-rw-r--r--drivers/iio/common/hid-sensors/hid-sensor-attributes.c4
-rw-r--r--drivers/iio/humidity/am2315.c2
-rw-r--r--drivers/iio/humidity/hdc100x.c27
-rw-r--r--drivers/iio/industrialio-buffer.c4
-rw-r--r--drivers/iio/industrialio-core.c5
-rw-r--r--drivers/iio/proximity/as3935.c2
14 files changed, 76 insertions, 36 deletions
diff --git a/drivers/iio/accel/bmc150-accel-core.c b/drivers/iio/accel/bmc150-accel-core.c
index 197e693e7..3833c83a4 100644
--- a/drivers/iio/accel/bmc150-accel-core.c
+++ b/drivers/iio/accel/bmc150-accel-core.c
@@ -67,6 +67,9 @@
#define BMC150_ACCEL_REG_PMU_BW 0x10
#define BMC150_ACCEL_DEF_BW 125
+#define BMC150_ACCEL_REG_RESET 0x14
+#define BMC150_ACCEL_RESET_VAL 0xB6
+
#define BMC150_ACCEL_REG_INT_MAP_0 0x19
#define BMC150_ACCEL_INT_MAP_0_BIT_SLOPE BIT(2)
@@ -1497,6 +1500,14 @@ static int bmc150_accel_chip_init(struct bmc150_accel_data *data)
int ret, i;
unsigned int val;
+ /*
+ * Reset chip to get it in a known good state. A delay of 1.8ms after
+ * reset is required according to the data sheets of supported chips.
+ */
+ regmap_write(data->regmap, BMC150_ACCEL_REG_RESET,
+ BMC150_ACCEL_RESET_VAL);
+ usleep_range(1800, 2500);
+
ret = regmap_read(data->regmap, BMC150_ACCEL_REG_CHIP_ID, &val);
if (ret < 0) {
dev_err(dev, "Error: Reading chip id\n");
diff --git a/drivers/iio/accel/kxsd9.c b/drivers/iio/accel/kxsd9.c
index 3a9f10678..9d72d4bcf 100644
--- a/drivers/iio/accel/kxsd9.c
+++ b/drivers/iio/accel/kxsd9.c
@@ -160,11 +160,13 @@ static int kxsd9_read_raw(struct iio_dev *indio_dev,
if (ret < 0)
goto error_ret;
*val = ret;
+ ret = IIO_VAL_INT;
break;
case IIO_CHAN_INFO_SCALE:
ret = spi_w8r8(st->us, KXSD9_READ(KXSD9_REG_CTRL_C));
if (ret < 0)
goto error_ret;
+ *val = 0;
*val2 = kxsd9_micro_scales[ret & KXSD9_FS_MASK];
ret = IIO_VAL_INT_PLUS_MICRO;
break;
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 25378c588..f7232185d 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -377,6 +377,7 @@ config QCOM_SPMI_VADC
config ROCKCHIP_SARADC
tristate "Rockchip SARADC driver"
depends on ARCH_ROCKCHIP || (ARM && COMPILE_TEST)
+ depends on RESET_CONTROLLER
help
Say yes here to build support for the SARADC found in SoCs from
Rockchip.
diff --git a/drivers/iio/adc/ad799x.c b/drivers/iio/adc/ad799x.c
index a3f5254f4..039622335 100644
--- a/drivers/iio/adc/ad799x.c
+++ b/drivers/iio/adc/ad799x.c
@@ -533,6 +533,7 @@ static struct attribute_group ad799x_event_attrs_group = {
static const struct iio_info ad7991_info = {
.read_raw = &ad799x_read_raw,
.driver_module = THIS_MODULE,
+ .update_scan_mode = ad799x_update_scan_mode,
};
static const struct iio_info ad7993_4_7_8_noirq_info = {
diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c
index 52430ba17..0438c6801 100644
--- a/drivers/iio/adc/at91_adc.c
+++ b/drivers/iio/adc/at91_adc.c
@@ -381,8 +381,8 @@ static irqreturn_t at91_adc_rl_interrupt(int irq, void *private)
st->ts_bufferedmeasure = false;
input_report_key(st->ts_input, BTN_TOUCH, 0);
input_sync(st->ts_input);
- } else if (status & AT91_ADC_EOC(3)) {
- /* Conversion finished */
+ } else if (status & AT91_ADC_EOC(3) && st->ts_input) {
+ /* Conversion finished and we've a touchscreen */
if (st->ts_bufferedmeasure) {
/*
* Last measurement is always discarded, since it can
diff --git a/drivers/iio/adc/rockchip_saradc.c b/drivers/iio/adc/rockchip_saradc.c
index f9ad6c2d6..85d701291 100644
--- a/drivers/iio/adc/rockchip_saradc.c
+++ b/drivers/iio/adc/rockchip_saradc.c
@@ -21,6 +21,8 @@
#include <linux/of_device.h>
#include <linux/clk.h>
#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/reset.h>
#include <linux/regulator/consumer.h>
#include <linux/iio/iio.h>
@@ -53,6 +55,7 @@ struct rockchip_saradc {
struct clk *clk;
struct completion completion;
struct regulator *vref;
+ struct reset_control *reset;
const struct rockchip_saradc_data *data;
u16 last_val;
};
@@ -190,6 +193,16 @@ static const struct of_device_id rockchip_saradc_match[] = {
};
MODULE_DEVICE_TABLE(of, rockchip_saradc_match);
+/**
+ * Reset SARADC Controller.
+ */
+static void rockchip_saradc_reset_controller(struct reset_control *reset)
+{
+ reset_control_assert(reset);
+ usleep_range(10, 20);
+ reset_control_deassert(reset);
+}
+
static int rockchip_saradc_probe(struct platform_device *pdev)
{
struct rockchip_saradc *info = NULL;
@@ -218,6 +231,20 @@ static int rockchip_saradc_probe(struct platform_device *pdev)
if (IS_ERR(info->regs))
return PTR_ERR(info->regs);
+ /*
+ * The reset should be an optional property, as it should work
+ * with old devicetrees as well
+ */
+ info->reset = devm_reset_control_get(&pdev->dev, "saradc-apb");
+ if (IS_ERR(info->reset)) {
+ ret = PTR_ERR(info->reset);
+ if (ret != -ENOENT)
+ return ret;
+
+ dev_dbg(&pdev->dev, "no reset control found\n");
+ info->reset = NULL;
+ }
+
init_completion(&info->completion);
irq = platform_get_irq(pdev, 0);
@@ -252,6 +279,9 @@ static int rockchip_saradc_probe(struct platform_device *pdev)
return PTR_ERR(info->vref);
}
+ if (info->reset)
+ rockchip_saradc_reset_controller(info->reset);
+
/*
* Use a default value for the converter clock.
* This may become user-configurable in the future.
diff --git a/drivers/iio/adc/ti-ads1015.c b/drivers/iio/adc/ti-ads1015.c
index 73cbf0b54..fe96af605 100644
--- a/drivers/iio/adc/ti-ads1015.c
+++ b/drivers/iio/adc/ti-ads1015.c
@@ -403,7 +403,8 @@ static const struct iio_info ads1015_info = {
#ifdef CONFIG_OF
static int ads1015_get_channels_config_of(struct i2c_client *client)
{
- struct ads1015_data *data = i2c_get_clientdata(client);
+ struct iio_dev *indio_dev = i2c_get_clientdata(client);
+ struct ads1015_data *data = iio_priv(indio_dev);
struct device_node *node;
if (!client->dev.of_node ||
diff --git a/drivers/iio/adc/ti_am335x_adc.c b/drivers/iio/adc/ti_am335x_adc.c
index c1e05532d..0470fc843 100644
--- a/drivers/iio/adc/ti_am335x_adc.c
+++ b/drivers/iio/adc/ti_am335x_adc.c
@@ -32,6 +32,7 @@
struct tiadc_device {
struct ti_tscadc_dev *mfd_tscadc;
+ struct mutex fifo1_lock; /* to protect fifo access */
int channels;
u8 channel_line[8];
u8 channel_step[8];
@@ -360,6 +361,7 @@ static int tiadc_read_raw(struct iio_dev *indio_dev,
int *val, int *val2, long mask)
{
struct tiadc_device *adc_dev = iio_priv(indio_dev);
+ int ret = IIO_VAL_INT;
int i, map_val;
unsigned int fifo1count, read, stepid;
bool found = false;
@@ -373,13 +375,14 @@ static int tiadc_read_raw(struct iio_dev *indio_dev,
if (!step_en)
return -EINVAL;
+ mutex_lock(&adc_dev->fifo1_lock);
fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT);
while (fifo1count--)
tiadc_readl(adc_dev, REG_FIFO1);
am335x_tsc_se_set_once(adc_dev->mfd_tscadc, step_en);
- timeout = jiffies + usecs_to_jiffies
+ timeout = jiffies + msecs_to_jiffies
(IDLE_TIMEOUT * adc_dev->channels);
/* Wait for Fifo threshold interrupt */
while (1) {
@@ -389,7 +392,8 @@ static int tiadc_read_raw(struct iio_dev *indio_dev,
if (time_after(jiffies, timeout)) {
am335x_tsc_se_adc_done(adc_dev->mfd_tscadc);
- return -EAGAIN;
+ ret = -EAGAIN;
+ goto err_unlock;
}
}
map_val = adc_dev->channel_step[chan->scan_index];
@@ -415,8 +419,11 @@ static int tiadc_read_raw(struct iio_dev *indio_dev,
am335x_tsc_se_adc_done(adc_dev->mfd_tscadc);
if (found == false)
- return -EBUSY;
- return IIO_VAL_INT;
+ ret = -EBUSY;
+
+err_unlock:
+ mutex_unlock(&adc_dev->fifo1_lock);
+ return ret;
}
static const struct iio_info tiadc_info = {
@@ -485,6 +492,7 @@ static int tiadc_probe(struct platform_device *pdev)
tiadc_step_config(indio_dev);
tiadc_writel(adc_dev, REG_FIFO1THR, FIFO1_THRESHOLD);
+ mutex_init(&adc_dev->fifo1_lock);
err = tiadc_channel_init(indio_dev, adc_dev->channels);
if (err < 0)
diff --git a/drivers/iio/common/hid-sensors/hid-sensor-attributes.c b/drivers/iio/common/hid-sensors/hid-sensor-attributes.c
index e81f43476..dc33c1dd5 100644
--- a/drivers/iio/common/hid-sensors/hid-sensor-attributes.c
+++ b/drivers/iio/common/hid-sensors/hid-sensor-attributes.c
@@ -56,8 +56,8 @@ static struct {
{HID_USAGE_SENSOR_ALS, 0, 1, 0},
{HID_USAGE_SENSOR_ALS, HID_USAGE_SENSOR_UNITS_LUX, 1, 0},
- {HID_USAGE_SENSOR_PRESSURE, 0, 100000, 0},
- {HID_USAGE_SENSOR_PRESSURE, HID_USAGE_SENSOR_UNITS_PASCAL, 1, 0},
+ {HID_USAGE_SENSOR_PRESSURE, 0, 100, 0},
+ {HID_USAGE_SENSOR_PRESSURE, HID_USAGE_SENSOR_UNITS_PASCAL, 0, 1000},
};
static int pow_10(unsigned power)
diff --git a/drivers/iio/humidity/am2315.c b/drivers/iio/humidity/am2315.c
index 11535911a..0ebced557 100644
--- a/drivers/iio/humidity/am2315.c
+++ b/drivers/iio/humidity/am2315.c
@@ -244,7 +244,7 @@ static int am2315_probe(struct i2c_client *client,
indio_dev->channels = am2315_channels;
indio_dev->num_channels = ARRAY_SIZE(am2315_channels);
- ret = iio_triggered_buffer_setup(indio_dev, NULL,
+ ret = iio_triggered_buffer_setup(indio_dev, iio_pollfunc_store_time,
am2315_trigger_handler, NULL);
if (ret < 0) {
dev_err(&client->dev, "iio triggered buffer setup failed\n");
diff --git a/drivers/iio/humidity/hdc100x.c b/drivers/iio/humidity/hdc100x.c
index a03832a5f..e0c9c70c2 100644
--- a/drivers/iio/humidity/hdc100x.c
+++ b/drivers/iio/humidity/hdc100x.c
@@ -142,7 +142,7 @@ static int hdc100x_get_measurement(struct hdc100x_data *data,
struct i2c_client *client = data->client;
int delay = data->adc_int_us[chan->address];
int ret;
- int val;
+ __be16 val;
/* start measurement */
ret = i2c_smbus_write_byte(client, chan->address);
@@ -154,26 +154,13 @@ static int hdc100x_get_measurement(struct hdc100x_data *data,
/* wait for integration time to pass */
usleep_range(delay, delay + 1000);
- /*
- * i2c_smbus_read_word_data cannot() be used here due to the command
- * value not being understood and causes NAKs preventing any reading
- * from being accessed.
- */
- ret = i2c_smbus_read_byte(client);
+ /* read measurement */
+ ret = i2c_master_recv(data->client, (char *)&val, sizeof(val));
if (ret < 0) {
- dev_err(&client->dev, "cannot read high byte measurement");
+ dev_err(&client->dev, "cannot read sensor data\n");
return ret;
}
- val = ret << 8;
-
- ret = i2c_smbus_read_byte(client);
- if (ret < 0) {
- dev_err(&client->dev, "cannot read low byte measurement");
- return ret;
- }
- val |= ret;
-
- return val;
+ return be16_to_cpu(val);
}
static int hdc100x_get_heater_status(struct hdc100x_data *data)
@@ -272,8 +259,8 @@ static int hdc100x_probe(struct i2c_client *client,
struct iio_dev *indio_dev;
struct hdc100x_data *data;
- if (!i2c_check_functionality(client->adapter,
- I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BYTE))
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA |
+ I2C_FUNC_SMBUS_BYTE | I2C_FUNC_I2C))
return -EOPNOTSUPP;
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
diff --git a/drivers/iio/industrialio-buffer.c b/drivers/iio/industrialio-buffer.c
index 49bf9c59f..158aaf44d 100644
--- a/drivers/iio/industrialio-buffer.c
+++ b/drivers/iio/industrialio-buffer.c
@@ -110,7 +110,7 @@ ssize_t iio_buffer_read_first_n_outer(struct file *filp, char __user *buf,
DEFINE_WAIT_FUNC(wait, woken_wake_function);
size_t datum_size;
size_t to_wait;
- int ret;
+ int ret = 0;
if (!indio_dev->info)
return -ENODEV;
@@ -153,7 +153,7 @@ ssize_t iio_buffer_read_first_n_outer(struct file *filp, char __user *buf,
ret = rb->access->read_first_n(rb, n, buf);
if (ret == 0 && (filp->f_flags & O_NONBLOCK))
ret = -EAGAIN;
- } while (ret == 0);
+ } while (ret == 0);
remove_wait_queue(&rb->pollq, &wait);
return ret;
diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c
index e6319a934..2e6a42758 100644
--- a/drivers/iio/industrialio-core.c
+++ b/drivers/iio/industrialio-core.c
@@ -532,9 +532,8 @@ ssize_t iio_format_value(char *buf, unsigned int type, int size, int *vals)
return sprintf(buf, "%d.%09u\n", vals[0], vals[1]);
case IIO_VAL_FRACTIONAL:
tmp = div_s64((s64)vals[0] * 1000000000LL, vals[1]);
- vals[1] = do_div(tmp, 1000000000LL);
- vals[0] = tmp;
- return sprintf(buf, "%d.%09u\n", vals[0], vals[1]);
+ vals[0] = (int)div_s64_rem(tmp, 1000000000, &vals[1]);
+ return sprintf(buf, "%d.%09u\n", vals[0], abs(vals[1]));
case IIO_VAL_FRACTIONAL_LOG2:
tmp = (s64)vals[0] * 1000000000LL >> vals[1];
vals[1] = do_div(tmp, 1000000000LL);
diff --git a/drivers/iio/proximity/as3935.c b/drivers/iio/proximity/as3935.c
index e2f926cdc..a0aedda7d 100644
--- a/drivers/iio/proximity/as3935.c
+++ b/drivers/iio/proximity/as3935.c
@@ -392,7 +392,7 @@ static int as3935_probe(struct spi_device *spi)
return ret;
}
- ret = iio_triggered_buffer_setup(indio_dev, NULL,
+ ret = iio_triggered_buffer_setup(indio_dev, iio_pollfunc_store_time,
&as3935_trigger_handler, NULL);
if (ret) {