summaryrefslogtreecommitdiff
path: root/drivers/infiniband/hw/hfi1/firmware.c
diff options
context:
space:
mode:
authorAndré Fabian Silva Delgado <emulatorman@parabola.nu>2016-09-11 04:34:46 -0300
committerAndré Fabian Silva Delgado <emulatorman@parabola.nu>2016-09-11 04:34:46 -0300
commit863981e96738983919de841ec669e157e6bdaeb0 (patch)
treed6d89a12e7eb8017837c057935a2271290907f76 /drivers/infiniband/hw/hfi1/firmware.c
parent8dec7c70575785729a6a9e6719a955e9c545bcab (diff)
Linux-libre 4.7.1-gnupck-4.7.1-gnu
Diffstat (limited to 'drivers/infiniband/hw/hfi1/firmware.c')
-rw-r--r--drivers/infiniband/hw/hfi1/firmware.c2056
1 files changed, 2056 insertions, 0 deletions
diff --git a/drivers/infiniband/hw/hfi1/firmware.c b/drivers/infiniband/hw/hfi1/firmware.c
new file mode 100644
index 000000000..cbd965cfa
--- /dev/null
+++ b/drivers/infiniband/hw/hfi1/firmware.c
@@ -0,0 +1,2056 @@
+/*
+ * Copyright(c) 2015, 2016 Intel Corporation.
+ *
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * BSD LICENSE
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * - Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * - Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * - Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#include <linux/firmware.h>
+#include <linux/mutex.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/crc32.h>
+
+#include "hfi.h"
+#include "trace.h"
+
+/*
+ * Make it easy to toggle firmware file name and if it gets loaded by
+ * editing the following. This may be something we do while in development
+ * but not necessarily something a user would ever need to use.
+ */
+#define DEFAULT_FW_8051_NAME_FPGA "/*(DEBLOBBED)*/"
+#define DEFAULT_FW_8051_NAME_ASIC "/*(DEBLOBBED)*/"
+#define DEFAULT_FW_FABRIC_NAME "/*(DEBLOBBED)*/"
+#define DEFAULT_FW_SBUS_NAME "/*(DEBLOBBED)*/"
+#define DEFAULT_FW_PCIE_NAME "/*(DEBLOBBED)*/"
+#define DEFAULT_PLATFORM_CONFIG_NAME "/*(DEBLOBBED)*/"
+#define ALT_FW_8051_NAME_ASIC "/*(DEBLOBBED)*/"
+#define ALT_FW_FABRIC_NAME "/*(DEBLOBBED)*/"
+#define ALT_FW_SBUS_NAME "/*(DEBLOBBED)*/"
+#define ALT_FW_PCIE_NAME "/*(DEBLOBBED)*/"
+
+static uint fw_8051_load = 1;
+static uint fw_fabric_serdes_load = 1;
+static uint fw_pcie_serdes_load = 1;
+static uint fw_sbus_load = 1;
+
+/*
+ * Access required in platform.c
+ * Maintains state of whether the platform config was fetched via the
+ * fallback option
+ */
+uint platform_config_load;
+
+/* Firmware file names get set in hfi1_firmware_init() based on the above */
+static char *fw_8051_name;
+static char *fw_fabric_serdes_name;
+static char *fw_sbus_name;
+static char *fw_pcie_serdes_name;
+static char *platform_config_name;
+
+#define SBUS_MAX_POLL_COUNT 100
+#define SBUS_COUNTER(reg, name) \
+ (((reg) >> ASIC_STS_SBUS_COUNTERS_##name##_CNT_SHIFT) & \
+ ASIC_STS_SBUS_COUNTERS_##name##_CNT_MASK)
+
+/*
+ * Firmware security header.
+ */
+struct css_header {
+ u32 module_type;
+ u32 header_len;
+ u32 header_version;
+ u32 module_id;
+ u32 module_vendor;
+ u32 date; /* BCD yyyymmdd */
+ u32 size; /* in DWORDs */
+ u32 key_size; /* in DWORDs */
+ u32 modulus_size; /* in DWORDs */
+ u32 exponent_size; /* in DWORDs */
+ u32 reserved[22];
+};
+
+/* expected field values */
+#define CSS_MODULE_TYPE 0x00000006
+#define CSS_HEADER_LEN 0x000000a1
+#define CSS_HEADER_VERSION 0x00010000
+#define CSS_MODULE_VENDOR 0x00008086
+
+#define KEY_SIZE 256
+#define MU_SIZE 8
+#define EXPONENT_SIZE 4
+
+/* the file itself */
+struct firmware_file {
+ struct css_header css_header;
+ u8 modulus[KEY_SIZE];
+ u8 exponent[EXPONENT_SIZE];
+ u8 signature[KEY_SIZE];
+ u8 firmware[];
+};
+
+struct augmented_firmware_file {
+ struct css_header css_header;
+ u8 modulus[KEY_SIZE];
+ u8 exponent[EXPONENT_SIZE];
+ u8 signature[KEY_SIZE];
+ u8 r2[KEY_SIZE];
+ u8 mu[MU_SIZE];
+ u8 firmware[];
+};
+
+/* augmented file size difference */
+#define AUGMENT_SIZE (sizeof(struct augmented_firmware_file) - \
+ sizeof(struct firmware_file))
+
+struct firmware_details {
+ /* Linux core piece */
+ const struct firmware *fw;
+
+ struct css_header *css_header;
+ u8 *firmware_ptr; /* pointer to binary data */
+ u32 firmware_len; /* length in bytes */
+ u8 *modulus; /* pointer to the modulus */
+ u8 *exponent; /* pointer to the exponent */
+ u8 *signature; /* pointer to the signature */
+ u8 *r2; /* pointer to r2 */
+ u8 *mu; /* pointer to mu */
+ struct augmented_firmware_file dummy_header;
+};
+
+/*
+ * The mutex protects fw_state, fw_err, and all of the firmware_details
+ * variables.
+ */
+static DEFINE_MUTEX(fw_mutex);
+enum fw_state {
+ FW_EMPTY,
+ FW_TRY,
+ FW_FINAL,
+ FW_ERR
+};
+
+static enum fw_state fw_state = FW_EMPTY;
+static int fw_err;
+static struct firmware_details fw_8051;
+static struct firmware_details fw_fabric;
+static struct firmware_details fw_pcie;
+static struct firmware_details fw_sbus;
+static const struct firmware *platform_config;
+
+/* flags for turn_off_spicos() */
+#define SPICO_SBUS 0x1
+#define SPICO_FABRIC 0x2
+#define ENABLE_SPICO_SMASK 0x1
+
+/* security block commands */
+#define RSA_CMD_INIT 0x1
+#define RSA_CMD_START 0x2
+
+/* security block status */
+#define RSA_STATUS_IDLE 0x0
+#define RSA_STATUS_ACTIVE 0x1
+#define RSA_STATUS_DONE 0x2
+#define RSA_STATUS_FAILED 0x3
+
+/* RSA engine timeout, in ms */
+#define RSA_ENGINE_TIMEOUT 100 /* ms */
+
+/* hardware mutex timeout, in ms */
+#define HM_TIMEOUT 10 /* ms */
+
+/* 8051 memory access timeout, in us */
+#define DC8051_ACCESS_TIMEOUT 100 /* us */
+
+/* the number of fabric SerDes on the SBus */
+#define NUM_FABRIC_SERDES 4
+
+/* SBus fabric SerDes addresses, one set per HFI */
+static const u8 fabric_serdes_addrs[2][NUM_FABRIC_SERDES] = {
+ { 0x01, 0x02, 0x03, 0x04 },
+ { 0x28, 0x29, 0x2a, 0x2b }
+};
+
+/* SBus PCIe SerDes addresses, one set per HFI */
+static const u8 pcie_serdes_addrs[2][NUM_PCIE_SERDES] = {
+ { 0x08, 0x0a, 0x0c, 0x0e, 0x10, 0x12, 0x14, 0x16,
+ 0x18, 0x1a, 0x1c, 0x1e, 0x20, 0x22, 0x24, 0x26 },
+ { 0x2f, 0x31, 0x33, 0x35, 0x37, 0x39, 0x3b, 0x3d,
+ 0x3f, 0x41, 0x43, 0x45, 0x47, 0x49, 0x4b, 0x4d }
+};
+
+/* SBus PCIe PCS addresses, one set per HFI */
+const u8 pcie_pcs_addrs[2][NUM_PCIE_SERDES] = {
+ { 0x09, 0x0b, 0x0d, 0x0f, 0x11, 0x13, 0x15, 0x17,
+ 0x19, 0x1b, 0x1d, 0x1f, 0x21, 0x23, 0x25, 0x27 },
+ { 0x30, 0x32, 0x34, 0x36, 0x38, 0x3a, 0x3c, 0x3e,
+ 0x40, 0x42, 0x44, 0x46, 0x48, 0x4a, 0x4c, 0x4e }
+};
+
+/* SBus fabric SerDes broadcast addresses, one per HFI */
+static const u8 fabric_serdes_broadcast[2] = { 0xe4, 0xe5 };
+static const u8 all_fabric_serdes_broadcast = 0xe1;
+
+/* SBus PCIe SerDes broadcast addresses, one per HFI */
+const u8 pcie_serdes_broadcast[2] = { 0xe2, 0xe3 };
+static const u8 all_pcie_serdes_broadcast = 0xe0;
+
+/* forwards */
+static void dispose_one_firmware(struct firmware_details *fdet);
+static int load_fabric_serdes_firmware(struct hfi1_devdata *dd,
+ struct firmware_details *fdet);
+
+/*
+ * Read a single 64-bit value from 8051 data memory.
+ *
+ * Expects:
+ * o caller to have already set up data read, no auto increment
+ * o caller to turn off read enable when finished
+ *
+ * The address argument is a byte offset. Bits 0:2 in the address are
+ * ignored - i.e. the hardware will always do aligned 8-byte reads as if
+ * the lower bits are zero.
+ *
+ * Return 0 on success, -ENXIO on a read error (timeout).
+ */
+static int __read_8051_data(struct hfi1_devdata *dd, u32 addr, u64 *result)
+{
+ u64 reg;
+ int count;
+
+ /* start the read at the given address */
+ reg = ((addr & DC_DC8051_CFG_RAM_ACCESS_CTRL_ADDRESS_MASK)
+ << DC_DC8051_CFG_RAM_ACCESS_CTRL_ADDRESS_SHIFT)
+ | DC_DC8051_CFG_RAM_ACCESS_CTRL_READ_ENA_SMASK;
+ write_csr(dd, DC_DC8051_CFG_RAM_ACCESS_CTRL, reg);
+
+ /* wait until ACCESS_COMPLETED is set */
+ count = 0;
+ while ((read_csr(dd, DC_DC8051_CFG_RAM_ACCESS_STATUS)
+ & DC_DC8051_CFG_RAM_ACCESS_STATUS_ACCESS_COMPLETED_SMASK)
+ == 0) {
+ count++;
+ if (count > DC8051_ACCESS_TIMEOUT) {
+ dd_dev_err(dd, "timeout reading 8051 data\n");
+ return -ENXIO;
+ }
+ ndelay(10);
+ }
+
+ /* gather the data */
+ *result = read_csr(dd, DC_DC8051_CFG_RAM_ACCESS_RD_DATA);
+
+ return 0;
+}
+
+/*
+ * Read 8051 data starting at addr, for len bytes. Will read in 8-byte chunks.
+ * Return 0 on success, -errno on error.
+ */
+int read_8051_data(struct hfi1_devdata *dd, u32 addr, u32 len, u64 *result)
+{
+ unsigned long flags;
+ u32 done;
+ int ret = 0;
+
+ spin_lock_irqsave(&dd->dc8051_memlock, flags);
+
+ /* data read set-up, no auto-increment */
+ write_csr(dd, DC_DC8051_CFG_RAM_ACCESS_SETUP, 0);
+
+ for (done = 0; done < len; addr += 8, done += 8, result++) {
+ ret = __read_8051_data(dd, addr, result);
+ if (ret)
+ break;
+ }
+
+ /* turn off read enable */
+ write_csr(dd, DC_DC8051_CFG_RAM_ACCESS_CTRL, 0);
+
+ spin_unlock_irqrestore(&dd->dc8051_memlock, flags);
+
+ return ret;
+}
+
+/*
+ * Write data or code to the 8051 code or data RAM.
+ */
+static int write_8051(struct hfi1_devdata *dd, int code, u32 start,
+ const u8 *data, u32 len)
+{
+ u64 reg;
+ u32 offset;
+ int aligned, count;
+
+ /* check alignment */
+ aligned = ((unsigned long)data & 0x7) == 0;
+
+ /* write set-up */
+ reg = (code ? DC_DC8051_CFG_RAM_ACCESS_SETUP_RAM_SEL_SMASK : 0ull)
+ | DC_DC8051_CFG_RAM_ACCESS_SETUP_AUTO_INCR_ADDR_SMASK;
+ write_csr(dd, DC_DC8051_CFG_RAM_ACCESS_SETUP, reg);
+
+ reg = ((start & DC_DC8051_CFG_RAM_ACCESS_CTRL_ADDRESS_MASK)
+ << DC_DC8051_CFG_RAM_ACCESS_CTRL_ADDRESS_SHIFT)
+ | DC_DC8051_CFG_RAM_ACCESS_CTRL_WRITE_ENA_SMASK;
+ write_csr(dd, DC_DC8051_CFG_RAM_ACCESS_CTRL, reg);
+
+ /* write */
+ for (offset = 0; offset < len; offset += 8) {
+ int bytes = len - offset;
+
+ if (bytes < 8) {
+ reg = 0;
+ memcpy(&reg, &data[offset], bytes);
+ } else if (aligned) {
+ reg = *(u64 *)&data[offset];
+ } else {
+ memcpy(&reg, &data[offset], 8);
+ }
+ write_csr(dd, DC_DC8051_CFG_RAM_ACCESS_WR_DATA, reg);
+
+ /* wait until ACCESS_COMPLETED is set */
+ count = 0;
+ while ((read_csr(dd, DC_DC8051_CFG_RAM_ACCESS_STATUS)
+ & DC_DC8051_CFG_RAM_ACCESS_STATUS_ACCESS_COMPLETED_SMASK)
+ == 0) {
+ count++;
+ if (count > DC8051_ACCESS_TIMEOUT) {
+ dd_dev_err(dd, "timeout writing 8051 data\n");
+ return -ENXIO;
+ }
+ udelay(1);
+ }
+ }
+
+ /* turn off write access, auto increment (also sets to data access) */
+ write_csr(dd, DC_DC8051_CFG_RAM_ACCESS_CTRL, 0);
+ write_csr(dd, DC_DC8051_CFG_RAM_ACCESS_SETUP, 0);
+
+ return 0;
+}
+
+/* return 0 if values match, non-zero and complain otherwise */
+static int invalid_header(struct hfi1_devdata *dd, const char *what,
+ u32 actual, u32 expected)
+{
+ if (actual == expected)
+ return 0;
+
+ dd_dev_err(dd,
+ "invalid firmware header field %s: expected 0x%x, actual 0x%x\n",
+ what, expected, actual);
+ return 1;
+}
+
+/*
+ * Verify that the static fields in the CSS header match.
+ */
+static int verify_css_header(struct hfi1_devdata *dd, struct css_header *css)
+{
+ /* verify CSS header fields (most sizes are in DW, so add /4) */
+ if (invalid_header(dd, "module_type", css->module_type,
+ CSS_MODULE_TYPE) ||
+ invalid_header(dd, "header_len", css->header_len,
+ (sizeof(struct firmware_file) / 4)) ||
+ invalid_header(dd, "header_version", css->header_version,
+ CSS_HEADER_VERSION) ||
+ invalid_header(dd, "module_vendor", css->module_vendor,
+ CSS_MODULE_VENDOR) ||
+ invalid_header(dd, "key_size", css->key_size, KEY_SIZE / 4) ||
+ invalid_header(dd, "modulus_size", css->modulus_size,
+ KEY_SIZE / 4) ||
+ invalid_header(dd, "exponent_size", css->exponent_size,
+ EXPONENT_SIZE / 4)) {
+ return -EINVAL;
+ }
+ return 0;
+}
+
+/*
+ * Make sure there are at least some bytes after the prefix.
+ */
+static int payload_check(struct hfi1_devdata *dd, const char *name,
+ long file_size, long prefix_size)
+{
+ /* make sure we have some payload */
+ if (prefix_size >= file_size) {
+ dd_dev_err(dd,
+ "firmware \"%s\", size %ld, must be larger than %ld bytes\n",
+ name, file_size, prefix_size);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/*
+ * Request the firmware from the system. Extract the pieces and fill in
+ * fdet. If successful, the caller will need to call dispose_one_firmware().
+ * Returns 0 on success, -ERRNO on error.
+ */
+static int obtain_one_firmware(struct hfi1_devdata *dd, const char *name,
+ struct firmware_details *fdet)
+{
+ struct css_header *css;
+ int ret;
+
+ memset(fdet, 0, sizeof(*fdet));
+
+ ret = reject_firmware(&fdet->fw, name, &dd->pcidev->dev);
+ if (ret) {
+ dd_dev_warn(dd, "cannot find firmware \"%s\", err %d\n",
+ name, ret);
+ return ret;
+ }
+
+ /* verify the firmware */
+ if (fdet->fw->size < sizeof(struct css_header)) {
+ dd_dev_err(dd, "firmware \"%s\" is too small\n", name);
+ ret = -EINVAL;
+ goto done;
+ }
+ css = (struct css_header *)fdet->fw->data;
+
+ hfi1_cdbg(FIRMWARE, "Firmware %s details:", name);
+ hfi1_cdbg(FIRMWARE, "file size: 0x%lx bytes", fdet->fw->size);
+ hfi1_cdbg(FIRMWARE, "CSS structure:");
+ hfi1_cdbg(FIRMWARE, " module_type 0x%x", css->module_type);
+ hfi1_cdbg(FIRMWARE, " header_len 0x%03x (0x%03x bytes)",
+ css->header_len, 4 * css->header_len);
+ hfi1_cdbg(FIRMWARE, " header_version 0x%x", css->header_version);
+ hfi1_cdbg(FIRMWARE, " module_id 0x%x", css->module_id);
+ hfi1_cdbg(FIRMWARE, " module_vendor 0x%x", css->module_vendor);
+ hfi1_cdbg(FIRMWARE, " date 0x%x", css->date);
+ hfi1_cdbg(FIRMWARE, " size 0x%03x (0x%03x bytes)",
+ css->size, 4 * css->size);
+ hfi1_cdbg(FIRMWARE, " key_size 0x%03x (0x%03x bytes)",
+ css->key_size, 4 * css->key_size);
+ hfi1_cdbg(FIRMWARE, " modulus_size 0x%03x (0x%03x bytes)",
+ css->modulus_size, 4 * css->modulus_size);
+ hfi1_cdbg(FIRMWARE, " exponent_size 0x%03x (0x%03x bytes)",
+ css->exponent_size, 4 * css->exponent_size);
+ hfi1_cdbg(FIRMWARE, "firmware size: 0x%lx bytes",
+ fdet->fw->size - sizeof(struct firmware_file));
+
+ /*
+ * If the file does not have a valid CSS header, fail.
+ * Otherwise, check the CSS size field for an expected size.
+ * The augmented file has r2 and mu inserted after the header
+ * was generated, so there will be a known difference between
+ * the CSS header size and the actual file size. Use this
+ * difference to identify an augmented file.
+ *
+ * Note: css->size is in DWORDs, multiply by 4 to get bytes.
+ */
+ ret = verify_css_header(dd, css);
+ if (ret) {
+ dd_dev_info(dd, "Invalid CSS header for \"%s\"\n", name);
+ } else if ((css->size * 4) == fdet->fw->size) {
+ /* non-augmented firmware file */
+ struct firmware_file *ff = (struct firmware_file *)
+ fdet->fw->data;
+
+ /* make sure there are bytes in the payload */
+ ret = payload_check(dd, name, fdet->fw->size,
+ sizeof(struct firmware_file));
+ if (ret == 0) {
+ fdet->css_header = css;
+ fdet->modulus = ff->modulus;
+ fdet->exponent = ff->exponent;
+ fdet->signature = ff->signature;
+ fdet->r2 = fdet->dummy_header.r2; /* use dummy space */
+ fdet->mu = fdet->dummy_header.mu; /* use dummy space */
+ fdet->firmware_ptr = ff->firmware;
+ fdet->firmware_len = fdet->fw->size -
+ sizeof(struct firmware_file);
+ /*
+ * Header does not include r2 and mu - generate here.
+ * For now, fail.
+ */
+ dd_dev_err(dd, "driver is unable to validate firmware without r2 and mu (not in firmware file)\n");
+ ret = -EINVAL;
+ }
+ } else if ((css->size * 4) + AUGMENT_SIZE == fdet->fw->size) {
+ /* augmented firmware file */
+ struct augmented_firmware_file *aff =
+ (struct augmented_firmware_file *)fdet->fw->data;
+
+ /* make sure there are bytes in the payload */
+ ret = payload_check(dd, name, fdet->fw->size,
+ sizeof(struct augmented_firmware_file));
+ if (ret == 0) {
+ fdet->css_header = css;
+ fdet->modulus = aff->modulus;
+ fdet->exponent = aff->exponent;
+ fdet->signature = aff->signature;
+ fdet->r2 = aff->r2;
+ fdet->mu = aff->mu;
+ fdet->firmware_ptr = aff->firmware;
+ fdet->firmware_len = fdet->fw->size -
+ sizeof(struct augmented_firmware_file);
+ }
+ } else {
+ /* css->size check failed */
+ dd_dev_err(dd,
+ "invalid firmware header field size: expected 0x%lx or 0x%lx, actual 0x%x\n",
+ fdet->fw->size / 4,
+ (fdet->fw->size - AUGMENT_SIZE) / 4,
+ css->size);
+
+ ret = -EINVAL;
+ }
+
+done:
+ /* if returning an error, clean up after ourselves */
+ if (ret)
+ dispose_one_firmware(fdet);
+ return ret;
+}
+
+static void dispose_one_firmware(struct firmware_details *fdet)
+{
+ release_firmware(fdet->fw);
+ /* erase all previous information */
+ memset(fdet, 0, sizeof(*fdet));
+}
+
+/*
+ * Obtain the 4 firmwares from the OS. All must be obtained at once or not
+ * at all. If called with the firmware state in FW_TRY, use alternate names.
+ * On exit, this routine will have set the firmware state to one of FW_TRY,
+ * FW_FINAL, or FW_ERR.
+ *
+ * Must be holding fw_mutex.
+ */
+static void __obtain_firmware(struct hfi1_devdata *dd)
+{
+ int err = 0;
+
+ if (fw_state == FW_FINAL) /* nothing more to obtain */
+ return;
+ if (fw_state == FW_ERR) /* already in error */
+ return;
+
+ /* fw_state is FW_EMPTY or FW_TRY */
+retry:
+ if (fw_state == FW_TRY) {
+ /*
+ * We tried the original and it failed. Move to the
+ * alternate.
+ */
+ dd_dev_warn(dd, "using alternate firmware names\n");
+ /*
+ * Let others run. Some systems, when missing firmware, does
+ * something that holds for 30 seconds. If we do that twice
+ * in a row it triggers task blocked warning.
+ */
+ cond_resched();
+ if (fw_8051_load)
+ dispose_one_firmware(&fw_8051);
+ if (fw_fabric_serdes_load)
+ dispose_one_firmware(&fw_fabric);
+ if (fw_sbus_load)
+ dispose_one_firmware(&fw_sbus);
+ if (fw_pcie_serdes_load)
+ dispose_one_firmware(&fw_pcie);
+ fw_8051_name = ALT_FW_8051_NAME_ASIC;
+ fw_fabric_serdes_name = ALT_FW_FABRIC_NAME;
+ fw_sbus_name = ALT_FW_SBUS_NAME;
+ fw_pcie_serdes_name = ALT_FW_PCIE_NAME;
+ }
+
+ if (fw_sbus_load) {
+ err = obtain_one_firmware(dd, fw_sbus_name, &fw_sbus);
+ if (err)
+ goto done;
+ }
+
+ if (fw_pcie_serdes_load) {
+ err = obtain_one_firmware(dd, fw_pcie_serdes_name, &fw_pcie);
+ if (err)
+ goto done;
+ }
+
+ if (fw_fabric_serdes_load) {
+ err = obtain_one_firmware(dd, fw_fabric_serdes_name,
+ &fw_fabric);
+ if (err)
+ goto done;
+ }
+
+ if (fw_8051_load) {
+ err = obtain_one_firmware(dd, fw_8051_name, &fw_8051);
+ if (err)
+ goto done;
+ }
+
+done:
+ if (err) {
+ /* oops, had problems obtaining a firmware */
+ if (fw_state == FW_EMPTY && dd->icode == ICODE_RTL_SILICON) {
+ /* retry with alternate (RTL only) */
+ fw_state = FW_TRY;
+ goto retry;
+ }
+ dd_dev_err(dd, "unable to obtain working firmware\n");
+ fw_state = FW_ERR;
+ fw_err = -ENOENT;
+ } else {
+ /* success */
+ if (fw_state == FW_EMPTY &&
+ dd->icode != ICODE_FUNCTIONAL_SIMULATOR)
+ fw_state = FW_TRY; /* may retry later */
+ else
+ fw_state = FW_FINAL; /* cannot try again */
+ }
+}
+
+/*
+ * Called by all HFIs when loading their firmware - i.e. device probe time.
+ * The first one will do the actual firmware load. Use a mutex to resolve
+ * any possible race condition.
+ *
+ * The call to this routine cannot be moved to driver load because the kernel
+ * call reject_firmware() requires a device which is only available after
+ * the first device probe.
+ */
+static int obtain_firmware(struct hfi1_devdata *dd)
+{
+ unsigned long timeout;
+ int err = 0;
+
+ mutex_lock(&fw_mutex);
+
+ /* 40s delay due to long delay on missing firmware on some systems */
+ timeout = jiffies + msecs_to_jiffies(40000);
+ while (fw_state == FW_TRY) {
+ /*
+ * Another device is trying the firmware. Wait until it
+ * decides what works (or not).
+ */
+ if (time_after(jiffies, timeout)) {
+ /* waited too long */
+ dd_dev_err(dd, "Timeout waiting for firmware try");
+ fw_state = FW_ERR;
+ fw_err = -ETIMEDOUT;
+ break;
+ }
+ mutex_unlock(&fw_mutex);
+ msleep(20); /* arbitrary delay */
+ mutex_lock(&fw_mutex);
+ }
+ /* not in FW_TRY state */
+
+ if (fw_state == FW_FINAL) {
+ if (platform_config) {
+ dd->platform_config.data = platform_config->data;
+ dd->platform_config.size = platform_config->size;
+ }
+ goto done; /* already acquired */
+ } else if (fw_state == FW_ERR) {
+ goto done; /* already tried and failed */
+ }
+ /* fw_state is FW_EMPTY */
+
+ /* set fw_state to FW_TRY, FW_FINAL, or FW_ERR, and fw_err */
+ __obtain_firmware(dd);
+
+ if (platform_config_load) {
+ platform_config = NULL;
+ err = reject_firmware(&platform_config, platform_config_name,
+ &dd->pcidev->dev);
+ if (err) {
+ platform_config = NULL;
+ goto done;
+ }
+ dd->platform_config.data = platform_config->data;
+ dd->platform_config.size = platform_config->size;
+ }
+
+done:
+ mutex_unlock(&fw_mutex);
+
+ return fw_err;
+}
+
+/*
+ * Called when the driver unloads. The timing is asymmetric with its
+ * counterpart, obtain_firmware(). If called at device remove time,
+ * then it is conceivable that another device could probe while the
+ * firmware is being disposed. The mutexes can be moved to do that
+ * safely, but then the firmware would be requested from the OS multiple
+ * times.
+ *
+ * No mutex is needed as the driver is unloading and there cannot be any
+ * other callers.
+ */
+void dispose_firmware(void)
+{
+ dispose_one_firmware(&fw_8051);
+ dispose_one_firmware(&fw_fabric);
+ dispose_one_firmware(&fw_pcie);
+ dispose_one_firmware(&fw_sbus);
+
+ release_firmware(platform_config);
+ platform_config = NULL;
+
+ /* retain the error state, otherwise revert to empty */
+ if (fw_state != FW_ERR)
+ fw_state = FW_EMPTY;
+}
+
+/*
+ * Called with the result of a firmware download.
+ *
+ * Return 1 to retry loading the firmware, 0 to stop.
+ */
+static int retry_firmware(struct hfi1_devdata *dd, int load_result)
+{
+ int retry;
+
+ mutex_lock(&fw_mutex);
+
+ if (load_result == 0) {
+ /*
+ * The load succeeded, so expect all others to do the same.
+ * Do not retry again.
+ */
+ if (fw_state == FW_TRY)
+ fw_state = FW_FINAL;
+ retry = 0; /* do NOT retry */
+ } else if (fw_state == FW_TRY) {
+ /* load failed, obtain alternate firmware */
+ __obtain_firmware(dd);
+ retry = (fw_state == FW_FINAL);
+ } else {
+ /* else in FW_FINAL or FW_ERR, no retry in either case */
+ retry = 0;
+ }
+
+ mutex_unlock(&fw_mutex);
+ return retry;
+}
+
+/*
+ * Write a block of data to a given array CSR. All calls will be in
+ * multiples of 8 bytes.
+ */
+static void write_rsa_data(struct hfi1_devdata *dd, int what,
+ const u8 *data, int nbytes)
+{
+ int qw_size = nbytes / 8;
+ int i;
+
+ if (((unsigned long)data & 0x7) == 0) {
+ /* aligned */
+ u64 *ptr = (u64 *)data;
+
+ for (i = 0; i < qw_size; i++, ptr++)
+ write_csr(dd, what + (8 * i), *ptr);
+ } else {
+ /* not aligned */
+ for (i = 0; i < qw_size; i++, data += 8) {
+ u64 value;
+
+ memcpy(&value, data, 8);
+ write_csr(dd, what + (8 * i), value);
+ }
+ }
+}
+
+/*
+ * Write a block of data to a given CSR as a stream of writes. All calls will
+ * be in multiples of 8 bytes.
+ */
+static void write_streamed_rsa_data(struct hfi1_devdata *dd, int what,
+ const u8 *data, int nbytes)
+{
+ u64 *ptr = (u64 *)data;
+ int qw_size = nbytes / 8;
+
+ for (; qw_size > 0; qw_size--, ptr++)
+ write_csr(dd, what, *ptr);
+}
+
+/*
+ * Download the signature and start the RSA mechanism. Wait for
+ * RSA_ENGINE_TIMEOUT before giving up.
+ */
+static int run_rsa(struct hfi1_devdata *dd, const char *who,
+ const u8 *signature)
+{
+ unsigned long timeout;
+ u64 reg;
+ u32 status;
+ int ret = 0;
+
+ /* write the signature */
+ write_rsa_data(dd, MISC_CFG_RSA_SIGNATURE, signature, KEY_SIZE);
+
+ /* initialize RSA */
+ write_csr(dd, MISC_CFG_RSA_CMD, RSA_CMD_INIT);
+
+ /*
+ * Make sure the engine is idle and insert a delay between the two
+ * writes to MISC_CFG_RSA_CMD.
+ */
+ status = (read_csr(dd, MISC_CFG_FW_CTRL)
+ & MISC_CFG_FW_CTRL_RSA_STATUS_SMASK)
+ >> MISC_CFG_FW_CTRL_RSA_STATUS_SHIFT;
+ if (status != RSA_STATUS_IDLE) {
+ dd_dev_err(dd, "%s security engine not idle - giving up\n",
+ who);
+ return -EBUSY;
+ }
+
+ /* start RSA */
+ write_csr(dd, MISC_CFG_RSA_CMD, RSA_CMD_START);
+
+ /*
+ * Look for the result.
+ *
+ * The RSA engine is hooked up to two MISC errors. The driver
+ * masks these errors as they do not respond to the standard
+ * error "clear down" mechanism. Look for these errors here and
+ * clear them when possible. This routine will exit with the
+ * errors of the current run still set.
+ *
+ * MISC_FW_AUTH_FAILED_ERR
+ * Firmware authorization failed. This can be cleared by
+ * re-initializing the RSA engine, then clearing the status bit.
+ * Do not re-init the RSA angine immediately after a successful
+ * run - this will reset the current authorization.
+ *
+ * MISC_KEY_MISMATCH_ERR
+ * Key does not match. The only way to clear this is to load
+ * a matching key then clear the status bit. If this error
+ * is raised, it will persist outside of this routine until a
+ * matching key is loaded.
+ */
+ timeout = msecs_to_jiffies(RSA_ENGINE_TIMEOUT) + jiffies;
+ while (1) {
+ status = (read_csr(dd, MISC_CFG_FW_CTRL)
+ & MISC_CFG_FW_CTRL_RSA_STATUS_SMASK)
+ >> MISC_CFG_FW_CTRL_RSA_STATUS_SHIFT;
+
+ if (status == RSA_STATUS_IDLE) {
+ /* should not happen */
+ dd_dev_err(dd, "%s firmware security bad idle state\n",
+ who);
+ ret = -EINVAL;
+ break;
+ } else if (status == RSA_STATUS_DONE) {
+ /* finished successfully */
+ break;
+ } else if (status == RSA_STATUS_FAILED) {
+ /* finished unsuccessfully */
+ ret = -EINVAL;
+ break;
+ }
+ /* else still active */
+
+ if (time_after(jiffies, timeout)) {
+ /*
+ * Timed out while active. We can't reset the engine
+ * if it is stuck active, but run through the
+ * error code to see what error bits are set.
+ */
+ dd_dev_err(dd, "%s firmware security time out\n", who);
+ ret = -ETIMEDOUT;
+ break;
+ }
+
+ msleep(20);
+ }
+
+ /*
+ * Arrive here on success or failure. Clear all RSA engine
+ * errors. All current errors will stick - the RSA logic is keeping
+ * error high. All previous errors will clear - the RSA logic
+ * is not keeping the error high.
+ */
+ write_csr(dd, MISC_ERR_CLEAR,
+ MISC_ERR_STATUS_MISC_FW_AUTH_FAILED_ERR_SMASK |
+ MISC_ERR_STATUS_MISC_KEY_MISMATCH_ERR_SMASK);
+ /*
+ * All that is left are the current errors. Print warnings on
+ * authorization failure details, if any. Firmware authorization
+ * can be retried, so these are only warnings.
+ */
+ reg = read_csr(dd, MISC_ERR_STATUS);
+ if (ret) {
+ if (reg & MISC_ERR_STATUS_MISC_FW_AUTH_FAILED_ERR_SMASK)
+ dd_dev_warn(dd, "%s firmware authorization failed\n",
+ who);
+ if (reg & MISC_ERR_STATUS_MISC_KEY_MISMATCH_ERR_SMASK)
+ dd_dev_warn(dd, "%s firmware key mismatch\n", who);
+ }
+
+ return ret;
+}
+
+static void load_security_variables(struct hfi1_devdata *dd,
+ struct firmware_details *fdet)
+{
+ /* Security variables a. Write the modulus */
+ write_rsa_data(dd, MISC_CFG_RSA_MODULUS, fdet->modulus, KEY_SIZE);
+ /* Security variables b. Write the r2 */
+ write_rsa_data(dd, MISC_CFG_RSA_R2, fdet->r2, KEY_SIZE);
+ /* Security variables c. Write the mu */
+ write_rsa_data(dd, MISC_CFG_RSA_MU, fdet->mu, MU_SIZE);
+ /* Security variables d. Write the header */
+ write_streamed_rsa_data(dd, MISC_CFG_SHA_PRELOAD,
+ (u8 *)fdet->css_header,
+ sizeof(struct css_header));
+}
+
+/* return the 8051 firmware state */
+static inline u32 get_firmware_state(struct hfi1_devdata *dd)
+{
+ u64 reg = read_csr(dd, DC_DC8051_STS_CUR_STATE);
+
+ return (reg >> DC_DC8051_STS_CUR_STATE_FIRMWARE_SHIFT)
+ & DC_DC8051_STS_CUR_STATE_FIRMWARE_MASK;
+}
+
+/*
+ * Wait until the firmware is up and ready to take host requests.
+ * Return 0 on success, -ETIMEDOUT on timeout.
+ */
+int wait_fm_ready(struct hfi1_devdata *dd, u32 mstimeout)
+{
+ unsigned long timeout;
+
+ /* in the simulator, the fake 8051 is always ready */
+ if (dd->icode == ICODE_FUNCTIONAL_SIMULATOR)
+ return 0;
+
+ timeout = msecs_to_jiffies(mstimeout) + jiffies;
+ while (1) {
+ if (get_firmware_state(dd) == 0xa0) /* ready */
+ return 0;
+ if (time_after(jiffies, timeout)) /* timed out */
+ return -ETIMEDOUT;
+ usleep_range(1950, 2050); /* sleep 2ms-ish */
+ }
+}
+
+/*
+ * Load the 8051 firmware.
+ */
+static int load_8051_firmware(struct hfi1_devdata *dd,
+ struct firmware_details *fdet)
+{
+ u64 reg;
+ int ret;
+ u8 ver_a, ver_b;
+
+ /*
+ * DC Reset sequence
+ * Load DC 8051 firmware
+ */
+ /*
+ * DC reset step 1: Reset DC8051
+ */
+ reg = DC_DC8051_CFG_RST_M8051W_SMASK
+ | DC_DC8051_CFG_RST_CRAM_SMASK
+ | DC_DC8051_CFG_RST_DRAM_SMASK
+ | DC_DC8051_CFG_RST_IRAM_SMASK
+ | DC_DC8051_CFG_RST_SFR_SMASK;
+ write_csr(dd, DC_DC8051_CFG_RST, reg);
+
+ /*
+ * DC reset step 2 (optional): Load 8051 data memory with link
+ * configuration
+ */
+
+ /*
+ * DC reset step 3: Load DC8051 firmware
+ */
+ /* release all but the core reset */
+ reg = DC_DC8051_CFG_RST_M8051W_SMASK;
+ write_csr(dd, DC_DC8051_CFG_RST, reg);
+
+ /* Firmware load step 1 */
+ load_security_variables(dd, fdet);
+
+ /*
+ * Firmware load step 2. Clear MISC_CFG_FW_CTRL.FW_8051_LOADED
+ */
+ write_csr(dd, MISC_CFG_FW_CTRL, 0);
+
+ /* Firmware load steps 3-5 */
+ ret = write_8051(dd, 1/*code*/, 0, fdet->firmware_ptr,
+ fdet->firmware_len);
+ if (ret)
+ return ret;
+
+ /*
+ * DC reset step 4. Host starts the DC8051 firmware
+ */
+ /*
+ * Firmware load step 6. Set MISC_CFG_FW_CTRL.FW_8051_LOADED
+ */
+ write_csr(dd, MISC_CFG_FW_CTRL, MISC_CFG_FW_CTRL_FW_8051_LOADED_SMASK);
+
+ /* Firmware load steps 7-10 */
+ ret = run_rsa(dd, "8051", fdet->signature);
+ if (ret)
+ return ret;
+
+ /* clear all reset bits, releasing the 8051 */
+ write_csr(dd, DC_DC8051_CFG_RST, 0ull);
+
+ /*
+ * DC reset step 5. Wait for firmware to be ready to accept host
+ * requests.
+ */
+ ret = wait_fm_ready(dd, TIMEOUT_8051_START);
+ if (ret) { /* timed out */
+ dd_dev_err(dd, "8051 start timeout, current state 0x%x\n",
+ get_firmware_state(dd));
+ return -ETIMEDOUT;
+ }
+
+ read_misc_status(dd, &ver_a, &ver_b);
+ dd_dev_info(dd, "8051 firmware version %d.%d\n",
+ (int)ver_b, (int)ver_a);
+ dd->dc8051_ver = dc8051_ver(ver_b, ver_a);
+
+ return 0;
+}
+
+/*
+ * Write the SBus request register
+ *
+ * No need for masking - the arguments are sized exactly.
+ */
+void sbus_request(struct hfi1_devdata *dd,
+ u8 receiver_addr, u8 data_addr, u8 command, u32 data_in)
+{
+ write_csr(dd, ASIC_CFG_SBUS_REQUEST,
+ ((u64)data_in << ASIC_CFG_SBUS_REQUEST_DATA_IN_SHIFT) |
+ ((u64)command << ASIC_CFG_SBUS_REQUEST_COMMAND_SHIFT) |
+ ((u64)data_addr << ASIC_CFG_SBUS_REQUEST_DATA_ADDR_SHIFT) |
+ ((u64)receiver_addr <<
+ ASIC_CFG_SBUS_REQUEST_RECEIVER_ADDR_SHIFT));
+}
+
+/*
+ * Turn off the SBus and fabric serdes spicos.
+ *
+ * + Must be called with Sbus fast mode turned on.
+ * + Must be called after fabric serdes broadcast is set up.
+ * + Must be called before the 8051 is loaded - assumes 8051 is not loaded
+ * when using MISC_CFG_FW_CTRL.
+ */
+static void turn_off_spicos(struct hfi1_devdata *dd, int flags)
+{
+ /* only needed on A0 */
+ if (!is_ax(dd))
+ return;
+
+ dd_dev_info(dd, "Turning off spicos:%s%s\n",
+ flags & SPICO_SBUS ? " SBus" : "",
+ flags & SPICO_FABRIC ? " fabric" : "");
+
+ write_csr(dd, MISC_CFG_FW_CTRL, ENABLE_SPICO_SMASK);
+ /* disable SBus spico */
+ if (flags & SPICO_SBUS)
+ sbus_request(dd, SBUS_MASTER_BROADCAST, 0x01,
+ WRITE_SBUS_RECEIVER, 0x00000040);
+
+ /* disable the fabric serdes spicos */
+ if (flags & SPICO_FABRIC)
+ sbus_request(dd, fabric_serdes_broadcast[dd->hfi1_id],
+ 0x07, WRITE_SBUS_RECEIVER, 0x00000000);
+ write_csr(dd, MISC_CFG_FW_CTRL, 0);
+}
+
+/*
+ * Reset all of the fabric serdes for this HFI in preparation to take the
+ * link to Polling.
+ *
+ * To do a reset, we need to write to to the serdes registers. Unfortunately,
+ * the fabric serdes download to the other HFI on the ASIC will have turned
+ * off the firmware validation on this HFI. This means we can't write to the
+ * registers to reset the serdes. Work around this by performing a complete
+ * re-download and validation of the fabric serdes firmware. This, as a
+ * by-product, will reset the serdes. NOTE: the re-download requires that
+ * the 8051 be in the Offline state. I.e. not actively trying to use the
+ * serdes. This routine is called at the point where the link is Offline and
+ * is getting ready to go to Polling.
+ */
+void fabric_serdes_reset(struct hfi1_devdata *dd)
+{
+ int ret;
+
+ if (!fw_fabric_serdes_load)
+ return;
+
+ ret = acquire_chip_resource(dd, CR_SBUS, SBUS_TIMEOUT);
+ if (ret) {
+ dd_dev_err(dd,
+ "Cannot acquire SBus resource to reset fabric SerDes - perhaps you should reboot\n");
+ return;
+ }
+ set_sbus_fast_mode(dd);
+
+ if (is_ax(dd)) {
+ /* A0 serdes do not work with a re-download */
+ u8 ra = fabric_serdes_broadcast[dd->hfi1_id];
+
+ /* place SerDes in reset and disable SPICO */
+ sbus_request(dd, ra, 0x07, WRITE_SBUS_RECEIVER, 0x00000011);
+ /* wait 100 refclk cycles @ 156.25MHz => 640ns */
+ udelay(1);
+ /* remove SerDes reset */
+ sbus_request(dd, ra, 0x07, WRITE_SBUS_RECEIVER, 0x00000010);
+ /* turn SPICO enable on */
+ sbus_request(dd, ra, 0x07, WRITE_SBUS_RECEIVER, 0x00000002);
+ } else {
+ turn_off_spicos(dd, SPICO_FABRIC);
+ /*
+ * No need for firmware retry - what to download has already
+ * been decided.
+ * No need to pay attention to the load return - the only
+ * failure is a validation failure, which has already been
+ * checked by the initial download.
+ */
+ (void)load_fabric_serdes_firmware(dd, &fw_fabric);
+ }
+
+ clear_sbus_fast_mode(dd);
+ release_chip_resource(dd, CR_SBUS);
+}
+
+/* Access to the SBus in this routine should probably be serialized */
+int sbus_request_slow(struct hfi1_devdata *dd,
+ u8 receiver_addr, u8 data_addr, u8 command, u32 data_in)
+{
+ u64 reg, count = 0;
+
+ /* make sure fast mode is clear */
+ clear_sbus_fast_mode(dd);
+
+ sbus_request(dd, receiver_addr, data_addr, command, data_in);
+ write_csr(dd, ASIC_CFG_SBUS_EXECUTE,
+ ASIC_CFG_SBUS_EXECUTE_EXECUTE_SMASK);
+ /* Wait for both DONE and RCV_DATA_VALID to go high */
+ reg = read_csr(dd, ASIC_STS_SBUS_RESULT);
+ while (!((reg & ASIC_STS_SBUS_RESULT_DONE_SMASK) &&
+ (reg & ASIC_STS_SBUS_RESULT_RCV_DATA_VALID_SMASK))) {
+ if (count++ >= SBUS_MAX_POLL_COUNT) {
+ u64 counts = read_csr(dd, ASIC_STS_SBUS_COUNTERS);
+ /*
+ * If the loop has timed out, we are OK if DONE bit
+ * is set and RCV_DATA_VALID and EXECUTE counters
+ * are the same. If not, we cannot proceed.
+ */
+ if ((reg & ASIC_STS_SBUS_RESULT_DONE_SMASK) &&
+ (SBUS_COUNTER(counts, RCV_DATA_VALID) ==
+ SBUS_COUNTER(counts, EXECUTE)))
+ break;
+ return -ETIMEDOUT;
+ }
+ udelay(1);
+ reg = read_csr(dd, ASIC_STS_SBUS_RESULT);
+ }
+ count = 0;
+ write_csr(dd, ASIC_CFG_SBUS_EXECUTE, 0);
+ /* Wait for DONE to clear after EXECUTE is cleared */
+ reg = read_csr(dd, ASIC_STS_SBUS_RESULT);
+ while (reg & ASIC_STS_SBUS_RESULT_DONE_SMASK) {
+ if (count++ >= SBUS_MAX_POLL_COUNT)
+ return -ETIME;
+ udelay(1);
+ reg = read_csr(dd, ASIC_STS_SBUS_RESULT);
+ }
+ return 0;
+}
+
+static int load_fabric_serdes_firmware(struct hfi1_devdata *dd,
+ struct firmware_details *fdet)
+{
+ int i, err;
+ const u8 ra = fabric_serdes_broadcast[dd->hfi1_id]; /* receiver addr */
+
+ dd_dev_info(dd, "Downloading fabric firmware\n");
+
+ /* step 1: load security variables */
+ load_security_variables(dd, fdet);
+ /* step 2: place SerDes in reset and disable SPICO */
+ sbus_request(dd, ra, 0x07, WRITE_SBUS_RECEIVER, 0x00000011);
+ /* wait 100 refclk cycles @ 156.25MHz => 640ns */
+ udelay(1);
+ /* step 3: remove SerDes reset */
+ sbus_request(dd, ra, 0x07, WRITE_SBUS_RECEIVER, 0x00000010);
+ /* step 4: assert IMEM override */
+ sbus_request(dd, ra, 0x00, WRITE_SBUS_RECEIVER, 0x40000000);
+ /* step 5: download SerDes machine code */
+ for (i = 0; i < fdet->firmware_len; i += 4) {
+ sbus_request(dd, ra, 0x0a, WRITE_SBUS_RECEIVER,
+ *(u32 *)&fdet->firmware_ptr[i]);
+ }
+ /* step 6: IMEM override off */
+ sbus_request(dd, ra, 0x00, WRITE_SBUS_RECEIVER, 0x00000000);
+ /* step 7: turn ECC on */
+ sbus_request(dd, ra, 0x0b, WRITE_SBUS_RECEIVER, 0x000c0000);
+
+ /* steps 8-11: run the RSA engine */
+ err = run_rsa(dd, "fabric serdes", fdet->signature);
+ if (err)
+ return err;
+
+ /* step 12: turn SPICO enable on */
+ sbus_request(dd, ra, 0x07, WRITE_SBUS_RECEIVER, 0x00000002);
+ /* step 13: enable core hardware interrupts */
+ sbus_request(dd, ra, 0x08, WRITE_SBUS_RECEIVER, 0x00000000);
+
+ return 0;
+}
+
+static int load_sbus_firmware(struct hfi1_devdata *dd,
+ struct firmware_details *fdet)
+{
+ int i, err;
+ const u8 ra = SBUS_MASTER_BROADCAST; /* receiver address */
+
+ dd_dev_info(dd, "Downloading SBus firmware\n");
+
+ /* step 1: load security variables */
+ load_security_variables(dd, fdet);
+ /* step 2: place SPICO into reset and enable off */
+ sbus_request(dd, ra, 0x01, WRITE_SBUS_RECEIVER, 0x000000c0);
+ /* step 3: remove reset, enable off, IMEM_CNTRL_EN on */
+ sbus_request(dd, ra, 0x01, WRITE_SBUS_RECEIVER, 0x00000240);
+ /* step 4: set starting IMEM address for burst download */
+ sbus_request(dd, ra, 0x03, WRITE_SBUS_RECEIVER, 0x80000000);
+ /* step 5: download the SBus Master machine code */
+ for (i = 0; i < fdet->firmware_len; i += 4) {
+ sbus_request(dd, ra, 0x14, WRITE_SBUS_RECEIVER,
+ *(u32 *)&fdet->firmware_ptr[i]);
+ }
+ /* step 6: set IMEM_CNTL_EN off */
+ sbus_request(dd, ra, 0x01, WRITE_SBUS_RECEIVER, 0x00000040);
+ /* step 7: turn ECC on */
+ sbus_request(dd, ra, 0x16, WRITE_SBUS_RECEIVER, 0x000c0000);
+
+ /* steps 8-11: run the RSA engine */
+ err = run_rsa(dd, "SBus", fdet->signature);
+ if (err)
+ return err;
+
+ /* step 12: set SPICO_ENABLE on */
+ sbus_request(dd, ra, 0x01, WRITE_SBUS_RECEIVER, 0x00000140);
+
+ return 0;
+}
+
+static int load_pcie_serdes_firmware(struct hfi1_devdata *dd,
+ struct firmware_details *fdet)
+{
+ int i;
+ const u8 ra = SBUS_MASTER_BROADCAST; /* receiver address */
+
+ dd_dev_info(dd, "Downloading PCIe firmware\n");
+
+ /* step 1: load security variables */
+ load_security_variables(dd, fdet);
+ /* step 2: assert single step (halts the SBus Master spico) */
+ sbus_request(dd, ra, 0x05, WRITE_SBUS_RECEIVER, 0x00000001);
+ /* step 3: enable XDMEM access */
+ sbus_request(dd, ra, 0x01, WRITE_SBUS_RECEIVER, 0x00000d40);
+ /* step 4: load firmware into SBus Master XDMEM */
+ /*
+ * NOTE: the dmem address, write_en, and wdata are all pre-packed,
+ * we only need to pick up the bytes and write them
+ */
+ for (i = 0; i < fdet->firmware_len; i += 4) {
+ sbus_request(dd, ra, 0x04, WRITE_SBUS_RECEIVER,
+ *(u32 *)&fdet->firmware_ptr[i]);
+ }
+ /* step 5: disable XDMEM access */
+ sbus_request(dd, ra, 0x01, WRITE_SBUS_RECEIVER, 0x00000140);
+ /* step 6: allow SBus Spico to run */
+ sbus_request(dd, ra, 0x05, WRITE_SBUS_RECEIVER, 0x00000000);
+
+ /*
+ * steps 7-11: run RSA, if it succeeds, firmware is available to
+ * be swapped
+ */
+ return run_rsa(dd, "PCIe serdes", fdet->signature);
+}
+
+/*
+ * Set the given broadcast values on the given list of devices.
+ */
+static void set_serdes_broadcast(struct hfi1_devdata *dd, u8 bg1, u8 bg2,
+ const u8 *addrs, int count)
+{
+ while (--count >= 0) {
+ /*
+ * Set BROADCAST_GROUP_1 and BROADCAST_GROUP_2, leave
+ * defaults for everything else. Do not read-modify-write,
+ * per instruction from the manufacturer.
+ *
+ * Register 0xfd:
+ * bits what
+ * ----- ---------------------------------
+ * 0 IGNORE_BROADCAST (default 0)
+ * 11:4 BROADCAST_GROUP_1 (default 0xff)
+ * 23:16 BROADCAST_GROUP_2 (default 0xff)
+ */
+ sbus_request(dd, addrs[count], 0xfd, WRITE_SBUS_RECEIVER,
+ (u32)bg1 << 4 | (u32)bg2 << 16);
+ }
+}
+
+int acquire_hw_mutex(struct hfi1_devdata *dd)
+{
+ unsigned long timeout;
+ int try = 0;
+ u8 mask = 1 << dd->hfi1_id;
+ u8 user;
+
+retry:
+ timeout = msecs_to_jiffies(HM_TIMEOUT) + jiffies;
+ while (1) {
+ write_csr(dd, ASIC_CFG_MUTEX, mask);
+ user = (u8)read_csr(dd, ASIC_CFG_MUTEX);
+ if (user == mask)
+ return 0; /* success */
+ if (time_after(jiffies, timeout))
+ break; /* timed out */
+ msleep(20);
+ }
+
+ /* timed out */
+ dd_dev_err(dd,
+ "Unable to acquire hardware mutex, mutex mask %u, my mask %u (%s)\n",
+ (u32)user, (u32)mask, (try == 0) ? "retrying" : "giving up");
+
+ if (try == 0) {
+ /* break mutex and retry */
+ write_csr(dd, ASIC_CFG_MUTEX, 0);
+ try++;
+ goto retry;
+ }
+
+ return -EBUSY;
+}
+
+void release_hw_mutex(struct hfi1_devdata *dd)
+{
+ write_csr(dd, ASIC_CFG_MUTEX, 0);
+}
+
+/* return the given resource bit(s) as a mask for the given HFI */
+static inline u64 resource_mask(u32 hfi1_id, u32 resource)
+{
+ return ((u64)resource) << (hfi1_id ? CR_DYN_SHIFT : 0);
+}
+
+static void fail_mutex_acquire_message(struct hfi1_devdata *dd,
+ const char *func)
+{
+ dd_dev_err(dd,
+ "%s: hardware mutex stuck - suggest rebooting the machine\n",
+ func);
+}
+
+/*
+ * Acquire access to a chip resource.
+ *
+ * Return 0 on success, -EBUSY if resource busy, -EIO if mutex acquire failed.
+ */
+static int __acquire_chip_resource(struct hfi1_devdata *dd, u32 resource)
+{
+ u64 scratch0, all_bits, my_bit;
+ int ret;
+
+ if (resource & CR_DYN_MASK) {
+ /* a dynamic resource is in use if either HFI has set the bit */
+ if (dd->pcidev->device == PCI_DEVICE_ID_INTEL0 &&
+ (resource & (CR_I2C1 | CR_I2C2))) {
+ /* discrete devices must serialize across both chains */
+ all_bits = resource_mask(0, CR_I2C1 | CR_I2C2) |
+ resource_mask(1, CR_I2C1 | CR_I2C2);
+ } else {
+ all_bits = resource_mask(0, resource) |
+ resource_mask(1, resource);
+ }
+ my_bit = resource_mask(dd->hfi1_id, resource);
+ } else {
+ /* non-dynamic resources are not split between HFIs */
+ all_bits = resource;
+ my_bit = resource;
+ }
+
+ /* lock against other callers within the driver wanting a resource */
+ mutex_lock(&dd->asic_data->asic_resource_mutex);
+
+ ret = acquire_hw_mutex(dd);
+ if (ret) {
+ fail_mutex_acquire_message(dd, __func__);
+ ret = -EIO;
+ goto done;
+ }
+
+ scratch0 = read_csr(dd, ASIC_CFG_SCRATCH);
+ if (scratch0 & all_bits) {
+ ret = -EBUSY;
+ } else {
+ write_csr(dd, ASIC_CFG_SCRATCH, scratch0 | my_bit);
+ /* force write to be visible to other HFI on another OS */
+ (void)read_csr(dd, ASIC_CFG_SCRATCH);
+ }
+
+ release_hw_mutex(dd);
+
+done:
+ mutex_unlock(&dd->asic_data->asic_resource_mutex);
+ return ret;
+}
+
+/*
+ * Acquire access to a chip resource, wait up to mswait milliseconds for
+ * the resource to become available.
+ *
+ * Return 0 on success, -EBUSY if busy (even after wait), -EIO if mutex
+ * acquire failed.
+ */
+int acquire_chip_resource(struct hfi1_devdata *dd, u32 resource, u32 mswait)
+{
+ unsigned long timeout;
+ int ret;
+
+ timeout = jiffies + msecs_to_jiffies(mswait);
+ while (1) {
+ ret = __acquire_chip_resource(dd, resource);
+ if (ret != -EBUSY)
+ return ret;
+ /* resource is busy, check our timeout */
+ if (time_after_eq(jiffies, timeout))
+ return -EBUSY;
+ usleep_range(80, 120); /* arbitrary delay */
+ }
+}
+
+/*
+ * Release access to a chip resource
+ */
+void release_chip_resource(struct hfi1_devdata *dd, u32 resource)
+{
+ u64 scratch0, bit;
+
+ /* only dynamic resources should ever be cleared */
+ if (!(resource & CR_DYN_MASK)) {
+ dd_dev_err(dd, "%s: invalid resource 0x%x\n", __func__,
+ resource);
+ return;
+ }
+ bit = resource_mask(dd->hfi1_id, resource);
+
+ /* lock against other callers within the driver wanting a resource */
+ mutex_lock(&dd->asic_data->asic_resource_mutex);
+
+ if (acquire_hw_mutex(dd)) {
+ fail_mutex_acquire_message(dd, __func__);
+ goto done;
+ }
+
+ scratch0 = read_csr(dd, ASIC_CFG_SCRATCH);
+ if ((scratch0 & bit) != 0) {
+ scratch0 &= ~bit;
+ write_csr(dd, ASIC_CFG_SCRATCH, scratch0);
+ /* force write to be visible to other HFI on another OS */
+ (void)read_csr(dd, ASIC_CFG_SCRATCH);
+ } else {
+ dd_dev_warn(dd, "%s: id %d, resource 0x%x: bit not set\n",
+ __func__, dd->hfi1_id, resource);
+ }
+
+ release_hw_mutex(dd);
+
+done:
+ mutex_unlock(&dd->asic_data->asic_resource_mutex);
+}
+
+/*
+ * Return true if resource is set, false otherwise. Print a warning
+ * if not set and a function is supplied.
+ */
+bool check_chip_resource(struct hfi1_devdata *dd, u32 resource,
+ const char *func)
+{
+ u64 scratch0, bit;
+
+ if (resource & CR_DYN_MASK)
+ bit = resource_mask(dd->hfi1_id, resource);
+ else
+ bit = resource;
+
+ scratch0 = read_csr(dd, ASIC_CFG_SCRATCH);
+ if ((scratch0 & bit) == 0) {
+ if (func)
+ dd_dev_warn(dd,
+ "%s: id %d, resource 0x%x, not acquired!\n",
+ func, dd->hfi1_id, resource);
+ return false;
+ }
+ return true;
+}
+
+static void clear_chip_resources(struct hfi1_devdata *dd, const char *func)
+{
+ u64 scratch0;
+
+ /* lock against other callers within the driver wanting a resource */
+ mutex_lock(&dd->asic_data->asic_resource_mutex);
+
+ if (acquire_hw_mutex(dd)) {
+ fail_mutex_acquire_message(dd, func);
+ goto done;
+ }
+
+ /* clear all dynamic access bits for this HFI */
+ scratch0 = read_csr(dd, ASIC_CFG_SCRATCH);
+ scratch0 &= ~resource_mask(dd->hfi1_id, CR_DYN_MASK);
+ write_csr(dd, ASIC_CFG_SCRATCH, scratch0);
+ /* force write to be visible to other HFI on another OS */
+ (void)read_csr(dd, ASIC_CFG_SCRATCH);
+
+ release_hw_mutex(dd);
+
+done:
+ mutex_unlock(&dd->asic_data->asic_resource_mutex);
+}
+
+void init_chip_resources(struct hfi1_devdata *dd)
+{
+ /* clear any holds left by us */
+ clear_chip_resources(dd, __func__);
+}
+
+void finish_chip_resources(struct hfi1_devdata *dd)
+{
+ /* clear any holds left by us */
+ clear_chip_resources(dd, __func__);
+}
+
+void set_sbus_fast_mode(struct hfi1_devdata *dd)
+{
+ write_csr(dd, ASIC_CFG_SBUS_EXECUTE,
+ ASIC_CFG_SBUS_EXECUTE_FAST_MODE_SMASK);
+}
+
+void clear_sbus_fast_mode(struct hfi1_devdata *dd)
+{
+ u64 reg, count = 0;
+
+ reg = read_csr(dd, ASIC_STS_SBUS_COUNTERS);
+ while (SBUS_COUNTER(reg, EXECUTE) !=
+ SBUS_COUNTER(reg, RCV_DATA_VALID)) {
+ if (count++ >= SBUS_MAX_POLL_COUNT)
+ break;
+ udelay(1);
+ reg = read_csr(dd, ASIC_STS_SBUS_COUNTERS);
+ }
+ write_csr(dd, ASIC_CFG_SBUS_EXECUTE, 0);
+}
+
+int load_firmware(struct hfi1_devdata *dd)
+{
+ int ret;
+
+ if (fw_fabric_serdes_load) {
+ ret = acquire_chip_resource(dd, CR_SBUS, SBUS_TIMEOUT);
+ if (ret)
+ return ret;
+
+ set_sbus_fast_mode(dd);
+
+ set_serdes_broadcast(dd, all_fabric_serdes_broadcast,
+ fabric_serdes_broadcast[dd->hfi1_id],
+ fabric_serdes_addrs[dd->hfi1_id],
+ NUM_FABRIC_SERDES);
+ turn_off_spicos(dd, SPICO_FABRIC);
+ do {
+ ret = load_fabric_serdes_firmware(dd, &fw_fabric);
+ } while (retry_firmware(dd, ret));
+
+ clear_sbus_fast_mode(dd);
+ release_chip_resource(dd, CR_SBUS);
+ if (ret)
+ return ret;
+ }
+
+ if (fw_8051_load) {
+ do {
+ ret = load_8051_firmware(dd, &fw_8051);
+ } while (retry_firmware(dd, ret));
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+int hfi1_firmware_init(struct hfi1_devdata *dd)
+{
+ /* only RTL can use these */
+ if (dd->icode != ICODE_RTL_SILICON) {
+ fw_fabric_serdes_load = 0;
+ fw_pcie_serdes_load = 0;
+ fw_sbus_load = 0;
+ }
+
+ /* no 8051 or QSFP on simulator */
+ if (dd->icode == ICODE_FUNCTIONAL_SIMULATOR) {
+ fw_8051_load = 0;
+ platform_config_load = 0;
+ }
+
+ if (!fw_8051_name) {
+ if (dd->icode == ICODE_RTL_SILICON)
+ fw_8051_name = DEFAULT_FW_8051_NAME_ASIC;
+ else
+ fw_8051_name = DEFAULT_FW_8051_NAME_FPGA;
+ }
+ if (!fw_fabric_serdes_name)
+ fw_fabric_serdes_name = DEFAULT_FW_FABRIC_NAME;
+ if (!fw_sbus_name)
+ fw_sbus_name = DEFAULT_FW_SBUS_NAME;
+ if (!fw_pcie_serdes_name)
+ fw_pcie_serdes_name = DEFAULT_FW_PCIE_NAME;
+ if (!platform_config_name)
+ platform_config_name = DEFAULT_PLATFORM_CONFIG_NAME;
+
+ return obtain_firmware(dd);
+}
+
+/*
+ * This function is a helper function for parse_platform_config(...) and
+ * does not check for validity of the platform configuration cache
+ * (because we know it is invalid as we are building up the cache).
+ * As such, this should not be called from anywhere other than
+ * parse_platform_config
+ */
+static int check_meta_version(struct hfi1_devdata *dd, u32 *system_table)
+{
+ u32 meta_ver, meta_ver_meta, ver_start, ver_len, mask;
+ struct platform_config_cache *pcfgcache = &dd->pcfg_cache;
+
+ if (!system_table)
+ return -EINVAL;
+
+ meta_ver_meta =
+ *(pcfgcache->config_tables[PLATFORM_CONFIG_SYSTEM_TABLE].table_metadata
+ + SYSTEM_TABLE_META_VERSION);
+
+ mask = ((1 << METADATA_TABLE_FIELD_START_LEN_BITS) - 1);
+ ver_start = meta_ver_meta & mask;
+
+ meta_ver_meta >>= METADATA_TABLE_FIELD_LEN_SHIFT;
+
+ mask = ((1 << METADATA_TABLE_FIELD_LEN_LEN_BITS) - 1);
+ ver_len = meta_ver_meta & mask;
+
+ ver_start /= 8;
+ meta_ver = *((u8 *)system_table + ver_start) & ((1 << ver_len) - 1);
+
+ if (meta_ver < 5) {
+ dd_dev_info(
+ dd, "%s:Please update platform config\n", __func__);
+ return -EINVAL;
+ }
+ return 0;
+}
+
+int parse_platform_config(struct hfi1_devdata *dd)
+{
+ struct platform_config_cache *pcfgcache = &dd->pcfg_cache;
+ u32 *ptr = NULL;
+ u32 header1 = 0, header2 = 0, magic_num = 0, crc = 0, file_length = 0;
+ u32 record_idx = 0, table_type = 0, table_length_dwords = 0;
+ int ret = -EINVAL; /* assume failure */
+
+ if (!dd->platform_config.data) {
+ dd_dev_info(dd, "%s: Missing config file\n", __func__);
+ goto bail;
+ }
+ ptr = (u32 *)dd->platform_config.data;
+
+ magic_num = *ptr;
+ ptr++;
+ if (magic_num != PLATFORM_CONFIG_MAGIC_NUM) {
+ dd_dev_info(dd, "%s: Bad config file\n", __func__);
+ goto bail;
+ }
+
+ /* Field is file size in DWORDs */
+ file_length = (*ptr) * 4;
+ ptr++;
+
+ if (file_length > dd->platform_config.size) {
+ dd_dev_info(dd, "%s:File claims to be larger than read size\n",
+ __func__);
+ goto bail;
+ } else if (file_length < dd->platform_config.size) {
+ dd_dev_info(dd,
+ "%s:File claims to be smaller than read size, continuing\n",
+ __func__);
+ }
+ /* exactly equal, perfection */
+
+ /*
+ * In both cases where we proceed, using the self-reported file length
+ * is the safer option
+ */
+ while (ptr < (u32 *)(dd->platform_config.data + file_length)) {
+ header1 = *ptr;
+ header2 = *(ptr + 1);
+ if (header1 != ~header2) {
+ dd_dev_info(dd, "%s: Failed validation at offset %ld\n",
+ __func__, (ptr - (u32 *)
+ dd->platform_config.data));
+ goto bail;
+ }
+
+ record_idx = *ptr &
+ ((1 << PLATFORM_CONFIG_HEADER_RECORD_IDX_LEN_BITS) - 1);
+
+ table_length_dwords = (*ptr >>
+ PLATFORM_CONFIG_HEADER_TABLE_LENGTH_SHIFT) &
+ ((1 << PLATFORM_CONFIG_HEADER_TABLE_LENGTH_LEN_BITS) - 1);
+
+ table_type = (*ptr >> PLATFORM_CONFIG_HEADER_TABLE_TYPE_SHIFT) &
+ ((1 << PLATFORM_CONFIG_HEADER_TABLE_TYPE_LEN_BITS) - 1);
+
+ /* Done with this set of headers */
+ ptr += 2;
+
+ if (record_idx) {
+ /* data table */
+ switch (table_type) {
+ case PLATFORM_CONFIG_SYSTEM_TABLE:
+ pcfgcache->config_tables[table_type].num_table =
+ 1;
+ ret = check_meta_version(dd, ptr);
+ if (ret)
+ goto bail;
+ break;
+ case PLATFORM_CONFIG_PORT_TABLE:
+ pcfgcache->config_tables[table_type].num_table =
+ 2;
+ break;
+ case PLATFORM_CONFIG_RX_PRESET_TABLE:
+ /* fall through */
+ case PLATFORM_CONFIG_TX_PRESET_TABLE:
+ /* fall through */
+ case PLATFORM_CONFIG_QSFP_ATTEN_TABLE:
+ /* fall through */
+ case PLATFORM_CONFIG_VARIABLE_SETTINGS_TABLE:
+ pcfgcache->config_tables[table_type].num_table =
+ table_length_dwords;
+ break;
+ default:
+ dd_dev_info(dd,
+ "%s: Unknown data table %d, offset %ld\n",
+ __func__, table_type,
+ (ptr - (u32 *)
+ dd->platform_config.data));
+ goto bail; /* We don't trust this file now */
+ }
+ pcfgcache->config_tables[table_type].table = ptr;
+ } else {
+ /* metadata table */
+ switch (table_type) {
+ case PLATFORM_CONFIG_SYSTEM_TABLE:
+ /* fall through */
+ case PLATFORM_CONFIG_PORT_TABLE:
+ /* fall through */
+ case PLATFORM_CONFIG_RX_PRESET_TABLE:
+ /* fall through */
+ case PLATFORM_CONFIG_TX_PRESET_TABLE:
+ /* fall through */
+ case PLATFORM_CONFIG_QSFP_ATTEN_TABLE:
+ /* fall through */
+ case PLATFORM_CONFIG_VARIABLE_SETTINGS_TABLE:
+ break;
+ default:
+ dd_dev_info(dd,
+ "%s: Unknown meta table %d, offset %ld\n",
+ __func__, table_type,
+ (ptr -
+ (u32 *)dd->platform_config.data));
+ goto bail; /* We don't trust this file now */
+ }
+ pcfgcache->config_tables[table_type].table_metadata =
+ ptr;
+ }
+
+ /* Calculate and check table crc */
+ crc = crc32_le(~(u32)0, (unsigned char const *)ptr,
+ (table_length_dwords * 4));
+ crc ^= ~(u32)0;
+
+ /* Jump the table */
+ ptr += table_length_dwords;
+ if (crc != *ptr) {
+ dd_dev_info(dd, "%s: Failed CRC check at offset %ld\n",
+ __func__, (ptr -
+ (u32 *)
+ dd->platform_config.data));
+ goto bail;
+ }
+ /* Jump the CRC DWORD */
+ ptr++;
+ }
+
+ pcfgcache->cache_valid = 1;
+ return 0;
+bail:
+ memset(pcfgcache, 0, sizeof(struct platform_config_cache));
+ return ret;
+}
+
+static int get_platform_fw_field_metadata(struct hfi1_devdata *dd, int table,
+ int field, u32 *field_len_bits,
+ u32 *field_start_bits)
+{
+ struct platform_config_cache *pcfgcache = &dd->pcfg_cache;
+ u32 *src_ptr = NULL;
+
+ if (!pcfgcache->cache_valid)
+ return -EINVAL;
+
+ switch (table) {
+ case PLATFORM_CONFIG_SYSTEM_TABLE:
+ /* fall through */
+ case PLATFORM_CONFIG_PORT_TABLE:
+ /* fall through */
+ case PLATFORM_CONFIG_RX_PRESET_TABLE:
+ /* fall through */
+ case PLATFORM_CONFIG_TX_PRESET_TABLE:
+ /* fall through */
+ case PLATFORM_CONFIG_QSFP_ATTEN_TABLE:
+ /* fall through */
+ case PLATFORM_CONFIG_VARIABLE_SETTINGS_TABLE:
+ if (field && field < platform_config_table_limits[table])
+ src_ptr =
+ pcfgcache->config_tables[table].table_metadata + field;
+ break;
+ default:
+ dd_dev_info(dd, "%s: Unknown table\n", __func__);
+ break;
+ }
+
+ if (!src_ptr)
+ return -EINVAL;
+
+ if (field_start_bits)
+ *field_start_bits = *src_ptr &
+ ((1 << METADATA_TABLE_FIELD_START_LEN_BITS) - 1);
+
+ if (field_len_bits)
+ *field_len_bits = (*src_ptr >> METADATA_TABLE_FIELD_LEN_SHIFT)
+ & ((1 << METADATA_TABLE_FIELD_LEN_LEN_BITS) - 1);
+
+ return 0;
+}
+
+/* This is the central interface to getting data out of the platform config
+ * file. It depends on parse_platform_config() having populated the
+ * platform_config_cache in hfi1_devdata, and checks the cache_valid member to
+ * validate the sanity of the cache.
+ *
+ * The non-obvious parameters:
+ * @table_index: Acts as a look up key into which instance of the tables the
+ * relevant field is fetched from.
+ *
+ * This applies to the data tables that have multiple instances. The port table
+ * is an exception to this rule as each HFI only has one port and thus the
+ * relevant table can be distinguished by hfi_id.
+ *
+ * @data: pointer to memory that will be populated with the field requested.
+ * @len: length of memory pointed by @data in bytes.
+ */
+int get_platform_config_field(struct hfi1_devdata *dd,
+ enum platform_config_table_type_encoding
+ table_type, int table_index, int field_index,
+ u32 *data, u32 len)
+{
+ int ret = 0, wlen = 0, seek = 0;
+ u32 field_len_bits = 0, field_start_bits = 0, *src_ptr = NULL;
+ struct platform_config_cache *pcfgcache = &dd->pcfg_cache;
+
+ if (data)
+ memset(data, 0, len);
+ else
+ return -EINVAL;
+
+ ret = get_platform_fw_field_metadata(dd, table_type, field_index,
+ &field_len_bits,
+ &field_start_bits);
+ if (ret)
+ return -EINVAL;
+
+ /* Convert length to bits */
+ len *= 8;
+
+ /* Our metadata function checked cache_valid and field_index for us */
+ switch (table_type) {
+ case PLATFORM_CONFIG_SYSTEM_TABLE:
+ src_ptr = pcfgcache->config_tables[table_type].table;
+
+ if (field_index != SYSTEM_TABLE_QSFP_POWER_CLASS_MAX) {
+ if (len < field_len_bits)
+ return -EINVAL;
+
+ seek = field_start_bits / 8;
+ wlen = field_len_bits / 8;
+
+ src_ptr = (u32 *)((u8 *)src_ptr + seek);
+
+ /*
+ * We expect the field to be byte aligned and whole byte
+ * lengths if we are here
+ */
+ memcpy(data, src_ptr, wlen);
+ return 0;
+ }
+ break;
+ case PLATFORM_CONFIG_PORT_TABLE:
+ /* Port table is 4 DWORDS */
+ src_ptr = dd->hfi1_id ?
+ pcfgcache->config_tables[table_type].table + 4 :
+ pcfgcache->config_tables[table_type].table;
+ break;
+ case PLATFORM_CONFIG_RX_PRESET_TABLE:
+ /* fall through */
+ case PLATFORM_CONFIG_TX_PRESET_TABLE:
+ /* fall through */
+ case PLATFORM_CONFIG_QSFP_ATTEN_TABLE:
+ /* fall through */
+ case PLATFORM_CONFIG_VARIABLE_SETTINGS_TABLE:
+ src_ptr = pcfgcache->config_tables[table_type].table;
+
+ if (table_index <
+ pcfgcache->config_tables[table_type].num_table)
+ src_ptr += table_index;
+ else
+ src_ptr = NULL;
+ break;
+ default:
+ dd_dev_info(dd, "%s: Unknown table\n", __func__);
+ break;
+ }
+
+ if (!src_ptr || len < field_len_bits)
+ return -EINVAL;
+
+ src_ptr += (field_start_bits / 32);
+ *data = (*src_ptr >> (field_start_bits % 32)) &
+ ((1 << field_len_bits) - 1);
+
+ return 0;
+}
+
+/*
+ * Download the firmware needed for the Gen3 PCIe SerDes. An update
+ * to the SBus firmware is needed before updating the PCIe firmware.
+ *
+ * Note: caller must be holding the SBus resource.
+ */
+int load_pcie_firmware(struct hfi1_devdata *dd)
+{
+ int ret = 0;
+
+ /* both firmware loads below use the SBus */
+ set_sbus_fast_mode(dd);
+
+ if (fw_sbus_load) {
+ turn_off_spicos(dd, SPICO_SBUS);
+ do {
+ ret = load_sbus_firmware(dd, &fw_sbus);
+ } while (retry_firmware(dd, ret));
+ if (ret)
+ goto done;
+ }
+
+ if (fw_pcie_serdes_load) {
+ dd_dev_info(dd, "Setting PCIe SerDes broadcast\n");
+ set_serdes_broadcast(dd, all_pcie_serdes_broadcast,
+ pcie_serdes_broadcast[dd->hfi1_id],
+ pcie_serdes_addrs[dd->hfi1_id],
+ NUM_PCIE_SERDES);
+ do {
+ ret = load_pcie_serdes_firmware(dd, &fw_pcie);
+ } while (retry_firmware(dd, ret));
+ if (ret)
+ goto done;
+ }
+
+done:
+ clear_sbus_fast_mode(dd);
+
+ return ret;
+}
+
+/*
+ * Read the GUID from the hardware, store it in dd.
+ */
+void read_guid(struct hfi1_devdata *dd)
+{
+ /* Take the DC out of reset to get a valid GUID value */
+ write_csr(dd, CCE_DC_CTRL, 0);
+ (void)read_csr(dd, CCE_DC_CTRL);
+
+ dd->base_guid = read_csr(dd, DC_DC8051_CFG_LOCAL_GUID);
+ dd_dev_info(dd, "GUID %llx",
+ (unsigned long long)dd->base_guid);
+}