Initial import

1 files changed, 438 insertions, 0 deletions

diff --git a/drivers/input/keyboard/nomadik-ske-keypad.c b/drivers/input/keyboard/nomadik-ske-keypad.c
new file mode 100644
index 000000000..c7d5b1666
--- /dev/null
+++ b/drivers/input/keyboard/nomadik-ske-keypad.c
@@ -0,0 +1,438 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Naveen Kumar G <naveen.gaddipati@stericsson.com> for ST-Ericsson
+ * Author: Sundar Iyer <sundar.iyer@stericsson.com> for ST-Ericsson
+ *
+ * License terms:GNU General Public License (GPL) version 2
+ *
+ * Keypad controller driver for the SKE (Scroll Key Encoder) module used in
+ * the Nomadik 8815 and Ux500 platforms.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/input.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+#include <linux/module.h>
+
+#include <linux/platform_data/keypad-nomadik-ske.h>
+
+/* SKE_CR bits */
+#define SKE_KPMLT	(0x1 << 6)
+#define SKE_KPCN	(0x7 << 3)
+#define SKE_KPASEN	(0x1 << 2)
+#define SKE_KPASON	(0x1 << 7)
+
+/* SKE_IMSC bits */
+#define SKE_KPIMA	(0x1 << 2)
+
+/* SKE_ICR bits */
+#define SKE_KPICS	(0x1 << 3)
+#define SKE_KPICA	(0x1 << 2)
+
+/* SKE_RIS bits */
+#define SKE_KPRISA	(0x1 << 2)
+
+#define SKE_KEYPAD_ROW_SHIFT	3
+#define SKE_KPD_NUM_ROWS	8
+#define SKE_KPD_NUM_COLS	8
+
+/* keypad auto scan registers */
+#define SKE_ASR0	0x20
+#define SKE_ASR1	0x24
+#define SKE_ASR2	0x28
+#define SKE_ASR3	0x2C
+
+#define SKE_NUM_ASRX_REGISTERS	(4)
+#define	KEY_PRESSED_DELAY	10
+
+/**
+ * struct ske_keypad  - data structure used by keypad driver
+ * @irq:	irq no
+ * @reg_base:	ske regsiters base address
+ * @input:	pointer to input device object
+ * @board:	keypad platform device
+ * @keymap:	matrix scan code table for keycodes
+ * @clk:	clock structure pointer
+ */
+struct ske_keypad {
+	int irq;
+	void __iomem *reg_base;
+	struct input_dev *input;
+	const struct ske_keypad_platform_data *board;
+	unsigned short keymap[SKE_KPD_NUM_ROWS * SKE_KPD_NUM_COLS];
+	struct clk *clk;
+	struct clk *pclk;
+	spinlock_t ske_keypad_lock;
+};
+
+static void ske_keypad_set_bits(struct ske_keypad *keypad, u16 addr,
+		u8 mask, u8 data)
+{
+	u32 ret;
+
+	spin_lock(&keypad->ske_keypad_lock);
+
+	ret = readl(keypad->reg_base + addr);
+	ret &= ~mask;
+	ret |= data;
+	writel(ret, keypad->reg_base + addr);
+
+	spin_unlock(&keypad->ske_keypad_lock);
+}
+
+/*
+ * ske_keypad_chip_init: init keypad controller configuration
+ *
+ * Enable Multi key press detection, auto scan mode
+ */
+static int __init ske_keypad_chip_init(struct ske_keypad *keypad)
+{
+	u32 value;
+	int timeout = keypad->board->debounce_ms;
+
+	/* check SKE_RIS to be 0 */
+	while ((readl(keypad->reg_base + SKE_RIS) != 0x00000000) && timeout--)
+		cpu_relax();
+
+	if (!timeout)
+		return -EINVAL;
+
+	/*
+	 * set debounce value
+	 * keypad dbounce is configured in DBCR[15:8]
+	 * dbounce value in steps of 32/32.768 ms
+	 */
+	spin_lock(&keypad->ske_keypad_lock);
+	value = readl(keypad->reg_base + SKE_DBCR);
+	value = value & 0xff;
+	value |= ((keypad->board->debounce_ms * 32000)/32768) << 8;
+	writel(value, keypad->reg_base + SKE_DBCR);
+	spin_unlock(&keypad->ske_keypad_lock);
+
+	/* enable multi key detection */
+	ske_keypad_set_bits(keypad, SKE_CR, 0x0, SKE_KPMLT);
+
+	/*
+	 * set up the number of columns
+	 * KPCN[5:3] defines no. of keypad columns to be auto scanned
+	 */
+	value = (keypad->board->kcol - 1) << 3;
+	ske_keypad_set_bits(keypad, SKE_CR, SKE_KPCN, value);
+
+	/* clear keypad interrupt for auto(and pending SW) scans */
+	ske_keypad_set_bits(keypad, SKE_ICR, 0x0, SKE_KPICA | SKE_KPICS);
+
+	/* un-mask keypad interrupts */
+	ske_keypad_set_bits(keypad, SKE_IMSC, 0x0, SKE_KPIMA);
+
+	/* enable automatic scan */
+	ske_keypad_set_bits(keypad, SKE_CR, 0x0, SKE_KPASEN);
+
+	return 0;
+}
+
+static void ske_keypad_report(struct ske_keypad *keypad, u8 status, int col)
+{
+	int row = 0, code, pos;
+	struct input_dev *input = keypad->input;
+	u32 ske_ris;
+	int key_pressed;
+	int num_of_rows;
+
+	/* find out the row */
+	num_of_rows = hweight8(status);
+	do {
+		pos = __ffs(status);
+		row = pos;
+		status &= ~(1 << pos);
+
+		code = MATRIX_SCAN_CODE(row, col, SKE_KEYPAD_ROW_SHIFT);
+		ske_ris = readl(keypad->reg_base + SKE_RIS);
+		key_pressed = ske_ris & SKE_KPRISA;
+
+		input_event(input, EV_MSC, MSC_SCAN, code);
+		input_report_key(input, keypad->keymap[code], key_pressed);
+		input_sync(input);
+		num_of_rows--;
+	} while (num_of_rows);
+}
+
+static void ske_keypad_read_data(struct ske_keypad *keypad)
+{
+	u8 status;
+	int col = 0;
+	int ske_asr, i;
+
+	/*
+	 * Read the auto scan registers
+	 *
+	 * Each SKE_ASRx (x=0 to x=3) contains two row values.
+	 * lower byte contains row value for column 2*x,
+	 * upper byte contains row value for column 2*x + 1
+	 */
+	for (i = 0; i < SKE_NUM_ASRX_REGISTERS; i++) {
+		ske_asr = readl(keypad->reg_base + SKE_ASR0 + (4 * i));
+		if (!ske_asr)
+			continue;
+
+		/* now that ASRx is zero, find out the coloumn x and row y */
+		status = ske_asr & 0xff;
+		if (status) {
+			col = i * 2;
+			ske_keypad_report(keypad, status, col);
+		}
+		status = (ske_asr & 0xff00) >> 8;
+		if (status) {
+			col = (i * 2) + 1;
+			ske_keypad_report(keypad, status, col);
+		}
+	}
+}
+
+static irqreturn_t ske_keypad_irq(int irq, void *dev_id)
+{
+	struct ske_keypad *keypad = dev_id;
+	int timeout = keypad->board->debounce_ms;
+
+	/* disable auto scan interrupt; mask the interrupt generated */
+	ske_keypad_set_bits(keypad, SKE_IMSC, ~SKE_KPIMA, 0x0);
+	ske_keypad_set_bits(keypad, SKE_ICR, 0x0, SKE_KPICA);
+
+	while ((readl(keypad->reg_base + SKE_CR) & SKE_KPASON) && --timeout)
+		cpu_relax();
+
+	/* SKEx registers are stable and can be read */
+	ske_keypad_read_data(keypad);
+
+	/* wait until raw interrupt is clear */
+	while ((readl(keypad->reg_base + SKE_RIS)) && --timeout)
+		msleep(KEY_PRESSED_DELAY);
+
+	/* enable auto scan interrupts */
+	ske_keypad_set_bits(keypad, SKE_IMSC, 0x0, SKE_KPIMA);
+
+	return IRQ_HANDLED;
+}
+
+static int __init ske_keypad_probe(struct platform_device *pdev)
+{
+	const struct ske_keypad_platform_data *plat =
+			dev_get_platdata(&pdev->dev);
+	struct ske_keypad *keypad;
+	struct input_dev *input;
+	struct resource *res;
+	int irq;
+	int error;
+
+	if (!plat) {
+		dev_err(&pdev->dev, "invalid keypad platform data\n");
+		return -EINVAL;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "failed to get keypad irq\n");
+		return -EINVAL;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "missing platform resources\n");
+		return -EINVAL;
+	}
+
+	keypad = kzalloc(sizeof(struct ske_keypad), GFP_KERNEL);
+	input = input_allocate_device();
+	if (!keypad || !input) {
+		dev_err(&pdev->dev, "failed to allocate keypad memory\n");
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	keypad->irq = irq;
+	keypad->board = plat;
+	keypad->input = input;
+	spin_lock_init(&keypad->ske_keypad_lock);
+
+	if (!request_mem_region(res->start, resource_size(res), pdev->name)) {
+		dev_err(&pdev->dev, "failed to request I/O memory\n");
+		error = -EBUSY;
+		goto err_free_mem;
+	}
+
+	keypad->reg_base = ioremap(res->start, resource_size(res));
+	if (!keypad->reg_base) {
+		dev_err(&pdev->dev, "failed to remap I/O memory\n");
+		error = -ENXIO;
+		goto err_free_mem_region;
+	}
+
+	keypad->pclk = clk_get(&pdev->dev, "apb_pclk");
+	if (IS_ERR(keypad->pclk)) {
+		dev_err(&pdev->dev, "failed to get pclk\n");
+		error = PTR_ERR(keypad->pclk);
+		goto err_iounmap;
+	}
+
+	keypad->clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(keypad->clk)) {
+		dev_err(&pdev->dev, "failed to get clk\n");
+		error = PTR_ERR(keypad->clk);
+		goto err_pclk;
+	}
+
+	input->id.bustype = BUS_HOST;
+	input->name = "ux500-ske-keypad";
+	input->dev.parent = &pdev->dev;
+
+	error = matrix_keypad_build_keymap(plat->keymap_data, NULL,
+					   SKE_KPD_NUM_ROWS, SKE_KPD_NUM_COLS,
+					   keypad->keymap, input);
+	if (error) {
+		dev_err(&pdev->dev, "Failed to build keymap\n");
+		goto err_clk;
+	}
+
+	input_set_capability(input, EV_MSC, MSC_SCAN);
+	if (!plat->no_autorepeat)
+		__set_bit(EV_REP, input->evbit);
+
+	error = clk_prepare_enable(keypad->pclk);
+	if (error) {
+		dev_err(&pdev->dev, "Failed to prepare/enable pclk\n");
+		goto err_clk;
+	}
+
+	error = clk_prepare_enable(keypad->clk);
+	if (error) {
+		dev_err(&pdev->dev, "Failed to prepare/enable clk\n");
+		goto err_pclk_disable;
+	}
+
+
+	/* go through board initialization helpers */
+	if (keypad->board->init)
+		keypad->board->init();
+
+	error = ske_keypad_chip_init(keypad);
+	if (error) {
+		dev_err(&pdev->dev, "unable to init keypad hardware\n");
+		goto err_clk_disable;
+	}
+
+	error = request_threaded_irq(keypad->irq, NULL, ske_keypad_irq,
+				     IRQF_ONESHOT, "ske-keypad", keypad);
+	if (error) {
+		dev_err(&pdev->dev, "allocate irq %d failed\n", keypad->irq);
+		goto err_clk_disable;
+	}
+
+	error = input_register_device(input);
+	if (error) {
+		dev_err(&pdev->dev,
+				"unable to register input device: %d\n", error);
+		goto err_free_irq;
+	}
+
+	if (plat->wakeup_enable)
+		device_init_wakeup(&pdev->dev, true);
+
+	platform_set_drvdata(pdev, keypad);
+
+	return 0;
+
+err_free_irq:
+	free_irq(keypad->irq, keypad);
+err_clk_disable:
+	clk_disable_unprepare(keypad->clk);
+err_pclk_disable:
+	clk_disable_unprepare(keypad->pclk);
+err_clk:
+	clk_put(keypad->clk);
+err_pclk:
+	clk_put(keypad->pclk);
+err_iounmap:
+	iounmap(keypad->reg_base);
+err_free_mem_region:
+	release_mem_region(res->start, resource_size(res));
+err_free_mem:
+	input_free_device(input);
+	kfree(keypad);
+	return error;
+}
+
+static int ske_keypad_remove(struct platform_device *pdev)
+{
+	struct ske_keypad *keypad = platform_get_drvdata(pdev);
+	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	free_irq(keypad->irq, keypad);
+
+	input_unregister_device(keypad->input);
+
+	clk_disable_unprepare(keypad->clk);
+	clk_put(keypad->clk);
+
+	if (keypad->board->exit)
+		keypad->board->exit();
+
+	iounmap(keypad->reg_base);
+	release_mem_region(res->start, resource_size(res));
+	kfree(keypad);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int ske_keypad_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct ske_keypad *keypad = platform_get_drvdata(pdev);
+	int irq = platform_get_irq(pdev, 0);
+
+	if (device_may_wakeup(dev))
+		enable_irq_wake(irq);
+	else
+		ske_keypad_set_bits(keypad, SKE_IMSC, ~SKE_KPIMA, 0x0);
+
+	return 0;
+}
+
+static int ske_keypad_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct ske_keypad *keypad = platform_get_drvdata(pdev);
+	int irq = platform_get_irq(pdev, 0);
+
+	if (device_may_wakeup(dev))
+		disable_irq_wake(irq);
+	else
+		ske_keypad_set_bits(keypad, SKE_IMSC, 0x0, SKE_KPIMA);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(ske_keypad_dev_pm_ops,
+			 ske_keypad_suspend, ske_keypad_resume);
+
+static struct platform_driver ske_keypad_driver = {
+	.driver = {
+		.name = "nmk-ske-keypad",
+		.pm = &ske_keypad_dev_pm_ops,
+	},
+	.remove = ske_keypad_remove,
+};
+
+module_platform_driver_probe(ske_keypad_driver, ske_keypad_probe);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Naveen Kumar <naveen.gaddipati@stericsson.com> / Sundar Iyer <sundar.iyer@stericsson.com>");
+MODULE_DESCRIPTION("Nomadik Scroll-Key-Encoder Keypad Driver");
+MODULE_ALIAS("platform:nomadik-ske-keypad");