Initial import

1 files changed, 924 insertions, 0 deletions

diff --git a/drivers/input/misc/cm109.c b/drivers/input/misc/cm109.c
new file mode 100644
index 000000000..9365535ba
--- /dev/null
+++ b/drivers/input/misc/cm109.c
@@ -0,0 +1,924 @@
+/*
+ * Driver for the VoIP USB phones with CM109 chipsets.
+ *
+ * Copyright (C) 2007 - 2008 Alfred E. Heggestad <aeh@db.org>
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License as
+ *	published by the Free Software Foundation, version 2.
+ */
+
+/*
+ *   Tested devices:
+ *	- Komunikate KIP1000
+ *	- Genius G-talk
+ *	- Allied-Telesis Corega USBPH01
+ *	- ...
+ *
+ * This driver is based on the yealink.c driver
+ *
+ * Thanks to:
+ *   - Authors of yealink.c
+ *   - Thomas Reitmayr
+ *   - Oliver Neukum for good review comments and code
+ *   - Shaun Jackman <sjackman@gmail.com> for Genius G-talk keymap
+ *   - Dmitry Torokhov for valuable input and review
+ *
+ * Todo:
+ *   - Read/write EEPROM
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/rwsem.h>
+#include <linux/usb/input.h>
+
+#define DRIVER_VERSION "20080805"
+#define DRIVER_AUTHOR  "Alfred E. Heggestad"
+#define DRIVER_DESC    "CM109 phone driver"
+
+static char *phone = "kip1000";
+module_param(phone, charp, S_IRUSR);
+MODULE_PARM_DESC(phone, "Phone name {kip1000, gtalk, usbph01, atcom}");
+
+enum {
+	/* HID Registers */
+	HID_IR0 = 0x00, /* Record/Playback-mute button, Volume up/down  */
+	HID_IR1 = 0x01, /* GPI, generic registers or EEPROM_DATA0       */
+	HID_IR2 = 0x02, /* Generic registers or EEPROM_DATA1            */
+	HID_IR3 = 0x03, /* Generic registers or EEPROM_CTRL             */
+	HID_OR0 = 0x00, /* Mapping control, buzzer, SPDIF (offset 0x04) */
+	HID_OR1 = 0x01, /* GPO - General Purpose Output                 */
+	HID_OR2 = 0x02, /* Set GPIO to input/output mode                */
+	HID_OR3 = 0x03, /* SPDIF status channel or EEPROM_CTRL          */
+
+	/* HID_IR0 */
+	RECORD_MUTE   = 1 << 3,
+	PLAYBACK_MUTE = 1 << 2,
+	VOLUME_DOWN   = 1 << 1,
+	VOLUME_UP     = 1 << 0,
+
+	/* HID_OR0 */
+	/* bits 7-6
+	   0: HID_OR1-2 are used for GPO; HID_OR0, 3 are used for buzzer
+	      and SPDIF
+	   1: HID_OR0-3 are used as generic HID registers
+	   2: Values written to HID_OR0-3 are also mapped to MCU_CTRL,
+	      EEPROM_DATA0-1, EEPROM_CTRL (see Note)
+	   3: Reserved
+	 */
+	HID_OR_GPO_BUZ_SPDIF   = 0 << 6,
+	HID_OR_GENERIC_HID_REG = 1 << 6,
+	HID_OR_MAP_MCU_EEPROM  = 2 << 6,
+
+	BUZZER_ON = 1 << 5,
+
+	/* up to 256 normal keys, up to 16 special keys */
+	KEYMAP_SIZE = 256 + 16,
+};
+
+/* CM109 protocol packet */
+struct cm109_ctl_packet {
+	u8 byte[4];
+} __attribute__ ((packed));
+
+enum { USB_PKT_LEN = sizeof(struct cm109_ctl_packet) };
+
+/* CM109 device structure */
+struct cm109_dev {
+	struct input_dev *idev;	 /* input device */
+	struct usb_device *udev; /* usb device */
+	struct usb_interface *intf;
+
+	/* irq input channel */
+	struct cm109_ctl_packet *irq_data;
+	dma_addr_t irq_dma;
+	struct urb *urb_irq;
+
+	/* control output channel */
+	struct cm109_ctl_packet *ctl_data;
+	dma_addr_t ctl_dma;
+	struct usb_ctrlrequest *ctl_req;
+	struct urb *urb_ctl;
+	/*
+	 * The 3 bitfields below are protected by ctl_submit_lock.
+	 * They have to be separate since they are accessed from IRQ
+	 * context.
+	 */
+	unsigned irq_urb_pending:1;	/* irq_urb is in flight */
+	unsigned ctl_urb_pending:1;	/* ctl_urb is in flight */
+	unsigned buzzer_pending:1;	/* need to issue buzz command */
+	spinlock_t ctl_submit_lock;
+
+	unsigned char buzzer_state;	/* on/off */
+
+	/* flags */
+	unsigned open:1;
+	unsigned resetting:1;
+	unsigned shutdown:1;
+
+	/* This mutex protects writes to the above flags */
+	struct mutex pm_mutex;
+
+	unsigned short keymap[KEYMAP_SIZE];
+
+	char phys[64];		/* physical device path */
+	int key_code;		/* last reported key */
+	int keybit;		/* 0=new scan  1,2,4,8=scan columns  */
+	u8 gpi;			/* Cached value of GPI (high nibble) */
+};
+
+/******************************************************************************
+ * CM109 key interface
+ *****************************************************************************/
+
+static unsigned short special_keymap(int code)
+{
+	if (code > 0xff) {
+		switch (code - 0xff) {
+		case RECORD_MUTE:	return KEY_MUTE;
+		case PLAYBACK_MUTE:	return KEY_MUTE;
+		case VOLUME_DOWN:	return KEY_VOLUMEDOWN;
+		case VOLUME_UP:		return KEY_VOLUMEUP;
+		}
+	}
+	return KEY_RESERVED;
+}
+
+/* Map device buttons to internal key events.
+ *
+ * The "up" and "down" keys, are symbolised by arrows on the button.
+ * The "pickup" and "hangup" keys are symbolised by a green and red phone
+ * on the button.
+
+ Komunikate KIP1000 Keyboard Matrix
+
+     -> -- 1 -- 2 -- 3  --> GPI pin 4 (0x10)
+      |    |    |    |
+     <- -- 4 -- 5 -- 6  --> GPI pin 5 (0x20)
+      |    |    |    |
+     END - 7 -- 8 -- 9  --> GPI pin 6 (0x40)
+      |    |    |    |
+     OK -- * -- 0 -- #  --> GPI pin 7 (0x80)
+      |    |    |    |
+
+     /|\  /|\  /|\  /|\
+      |    |    |    |
+GPO
+pin:  3    2    1    0
+     0x8  0x4  0x2  0x1
+
+ */
+static unsigned short keymap_kip1000(int scancode)
+{
+	switch (scancode) {				/* phone key:   */
+	case 0x82: return KEY_NUMERIC_0;		/*   0          */
+	case 0x14: return KEY_NUMERIC_1;		/*   1          */
+	case 0x12: return KEY_NUMERIC_2;		/*   2          */
+	case 0x11: return KEY_NUMERIC_3;		/*   3          */
+	case 0x24: return KEY_NUMERIC_4;		/*   4          */
+	case 0x22: return KEY_NUMERIC_5;		/*   5          */
+	case 0x21: return KEY_NUMERIC_6;		/*   6          */
+	case 0x44: return KEY_NUMERIC_7;		/*   7          */
+	case 0x42: return KEY_NUMERIC_8;		/*   8          */
+	case 0x41: return KEY_NUMERIC_9;		/*   9          */
+	case 0x81: return KEY_NUMERIC_POUND;		/*   #          */
+	case 0x84: return KEY_NUMERIC_STAR;		/*   *          */
+	case 0x88: return KEY_ENTER;			/*   pickup     */
+	case 0x48: return KEY_ESC;			/*   hangup     */
+	case 0x28: return KEY_LEFT;			/*   IN         */
+	case 0x18: return KEY_RIGHT;			/*   OUT        */
+	default:   return special_keymap(scancode);
+	}
+}
+
+/*
+  Contributed by Shaun Jackman <sjackman@gmail.com>
+
+  Genius G-Talk keyboard matrix
+     0 1 2 3
+  4: 0 4 8 Talk
+  5: 1 5 9 End
+  6: 2 6 # Up
+  7: 3 7 * Down
+*/
+static unsigned short keymap_gtalk(int scancode)
+{
+	switch (scancode) {
+	case 0x11: return KEY_NUMERIC_0;
+	case 0x21: return KEY_NUMERIC_1;
+	case 0x41: return KEY_NUMERIC_2;
+	case 0x81: return KEY_NUMERIC_3;
+	case 0x12: return KEY_NUMERIC_4;
+	case 0x22: return KEY_NUMERIC_5;
+	case 0x42: return KEY_NUMERIC_6;
+	case 0x82: return KEY_NUMERIC_7;
+	case 0x14: return KEY_NUMERIC_8;
+	case 0x24: return KEY_NUMERIC_9;
+	case 0x44: return KEY_NUMERIC_POUND;	/* # */
+	case 0x84: return KEY_NUMERIC_STAR;	/* * */
+	case 0x18: return KEY_ENTER;		/* Talk (green handset) */
+	case 0x28: return KEY_ESC;		/* End (red handset) */
+	case 0x48: return KEY_UP;		/* Menu up (rocker switch) */
+	case 0x88: return KEY_DOWN;		/* Menu down (rocker switch) */
+	default:   return special_keymap(scancode);
+	}
+}
+
+/*
+ * Keymap for Allied-Telesis Corega USBPH01
+ * http://www.alliedtelesis-corega.com/2/1344/1437/1360/chprd.html
+ *
+ * Contributed by july@nat.bg
+ */
+static unsigned short keymap_usbph01(int scancode)
+{
+	switch (scancode) {
+	case 0x11: return KEY_NUMERIC_0;		/*   0          */
+	case 0x21: return KEY_NUMERIC_1;		/*   1          */
+	case 0x41: return KEY_NUMERIC_2;		/*   2          */
+	case 0x81: return KEY_NUMERIC_3;		/*   3          */
+	case 0x12: return KEY_NUMERIC_4;		/*   4          */
+	case 0x22: return KEY_NUMERIC_5;		/*   5          */
+	case 0x42: return KEY_NUMERIC_6;		/*   6          */
+	case 0x82: return KEY_NUMERIC_7;		/*   7          */
+	case 0x14: return KEY_NUMERIC_8;		/*   8          */
+	case 0x24: return KEY_NUMERIC_9;		/*   9          */
+	case 0x44: return KEY_NUMERIC_POUND;		/*   #          */
+	case 0x84: return KEY_NUMERIC_STAR;		/*   *          */
+	case 0x18: return KEY_ENTER;			/*   pickup     */
+	case 0x28: return KEY_ESC;			/*   hangup     */
+	case 0x48: return KEY_LEFT;			/*   IN         */
+	case 0x88: return KEY_RIGHT;			/*   OUT        */
+	default:   return special_keymap(scancode);
+	}
+}
+
+/*
+ * Keymap for ATCom AU-100
+ * http://www.atcom.cn/products.html 
+ * http://www.packetizer.com/products/au100/
+ * http://www.voip-info.org/wiki/view/AU-100
+ *
+ * Contributed by daniel@gimpelevich.san-francisco.ca.us
+ */
+static unsigned short keymap_atcom(int scancode)
+{
+	switch (scancode) {				/* phone key:   */
+	case 0x82: return KEY_NUMERIC_0;		/*   0          */
+	case 0x11: return KEY_NUMERIC_1;		/*   1          */
+	case 0x12: return KEY_NUMERIC_2;		/*   2          */
+	case 0x14: return KEY_NUMERIC_3;		/*   3          */
+	case 0x21: return KEY_NUMERIC_4;		/*   4          */
+	case 0x22: return KEY_NUMERIC_5;		/*   5          */
+	case 0x24: return KEY_NUMERIC_6;		/*   6          */
+	case 0x41: return KEY_NUMERIC_7;		/*   7          */
+	case 0x42: return KEY_NUMERIC_8;		/*   8          */
+	case 0x44: return KEY_NUMERIC_9;		/*   9          */
+	case 0x84: return KEY_NUMERIC_POUND;		/*   #          */
+	case 0x81: return KEY_NUMERIC_STAR;		/*   *          */
+	case 0x18: return KEY_ENTER;			/*   pickup     */
+	case 0x28: return KEY_ESC;			/*   hangup     */
+	case 0x48: return KEY_LEFT;			/* left arrow   */
+	case 0x88: return KEY_RIGHT;			/* right arrow  */
+	default:   return special_keymap(scancode);
+	}
+}
+
+static unsigned short (*keymap)(int) = keymap_kip1000;
+
+/*
+ * Completes a request by converting the data into events for the
+ * input subsystem.
+ */
+static void report_key(struct cm109_dev *dev, int key)
+{
+	struct input_dev *idev = dev->idev;
+
+	if (dev->key_code >= 0) {
+		/* old key up */
+		input_report_key(idev, dev->key_code, 0);
+	}
+
+	dev->key_code = key;
+	if (key >= 0) {
+		/* new valid key */
+		input_report_key(idev, key, 1);
+	}
+
+	input_sync(idev);
+}
+
+/******************************************************************************
+ * CM109 usb communication interface
+ *****************************************************************************/
+
+static void cm109_submit_buzz_toggle(struct cm109_dev *dev)
+{
+	int error;
+
+	if (dev->buzzer_state)
+		dev->ctl_data->byte[HID_OR0] |= BUZZER_ON;
+	else
+		dev->ctl_data->byte[HID_OR0] &= ~BUZZER_ON;
+
+	error = usb_submit_urb(dev->urb_ctl, GFP_ATOMIC);
+	if (error)
+		dev_err(&dev->intf->dev,
+			"%s: usb_submit_urb (urb_ctl) failed %d\n",
+			__func__, error);
+}
+
+/*
+ * IRQ handler
+ */
+static void cm109_urb_irq_callback(struct urb *urb)
+{
+	struct cm109_dev *dev = urb->context;
+	const int status = urb->status;
+	int error;
+
+	dev_dbg(&dev->intf->dev, "### URB IRQ: [0x%02x 0x%02x 0x%02x 0x%02x] keybit=0x%02x\n",
+	     dev->irq_data->byte[0],
+	     dev->irq_data->byte[1],
+	     dev->irq_data->byte[2],
+	     dev->irq_data->byte[3],
+	     dev->keybit);
+
+	if (status) {
+		if (status == -ESHUTDOWN)
+			return;
+		dev_err_ratelimited(&dev->intf->dev, "%s: urb status %d\n",
+				    __func__, status);
+		goto out;
+	}
+
+	/* Special keys */
+	if (dev->irq_data->byte[HID_IR0] & 0x0f) {
+		const int code = (dev->irq_data->byte[HID_IR0] & 0x0f);
+		report_key(dev, dev->keymap[0xff + code]);
+	}
+
+	/* Scan key column */
+	if (dev->keybit == 0xf) {
+
+		/* Any changes ? */
+		if ((dev->gpi & 0xf0) == (dev->irq_data->byte[HID_IR1] & 0xf0))
+			goto out;
+
+		dev->gpi = dev->irq_data->byte[HID_IR1] & 0xf0;
+		dev->keybit = 0x1;
+	} else {
+		report_key(dev, dev->keymap[dev->irq_data->byte[HID_IR1]]);
+
+		dev->keybit <<= 1;
+		if (dev->keybit > 0x8)
+			dev->keybit = 0xf;
+	}
+
+ out:
+
+	spin_lock(&dev->ctl_submit_lock);
+
+	dev->irq_urb_pending = 0;
+
+	if (likely(!dev->shutdown)) {
+
+		if (dev->buzzer_state)
+			dev->ctl_data->byte[HID_OR0] |= BUZZER_ON;
+		else
+			dev->ctl_data->byte[HID_OR0] &= ~BUZZER_ON;
+
+		dev->ctl_data->byte[HID_OR1] = dev->keybit;
+		dev->ctl_data->byte[HID_OR2] = dev->keybit;
+
+		dev->buzzer_pending = 0;
+		dev->ctl_urb_pending = 1;
+
+		error = usb_submit_urb(dev->urb_ctl, GFP_ATOMIC);
+		if (error)
+			dev_err(&dev->intf->dev,
+				"%s: usb_submit_urb (urb_ctl) failed %d\n",
+				__func__, error);
+	}
+
+	spin_unlock(&dev->ctl_submit_lock);
+}
+
+static void cm109_urb_ctl_callback(struct urb *urb)
+{
+	struct cm109_dev *dev = urb->context;
+	const int status = urb->status;
+	int error;
+
+	dev_dbg(&dev->intf->dev, "### URB CTL: [0x%02x 0x%02x 0x%02x 0x%02x]\n",
+	     dev->ctl_data->byte[0],
+	     dev->ctl_data->byte[1],
+	     dev->ctl_data->byte[2],
+	     dev->ctl_data->byte[3]);
+
+	if (status) {
+		if (status == -ESHUTDOWN)
+			return;
+		dev_err_ratelimited(&dev->intf->dev, "%s: urb status %d\n",
+				    __func__, status);
+	}
+
+	spin_lock(&dev->ctl_submit_lock);
+
+	dev->ctl_urb_pending = 0;
+
+	if (likely(!dev->shutdown)) {
+
+		if (dev->buzzer_pending || status) {
+			dev->buzzer_pending = 0;
+			dev->ctl_urb_pending = 1;
+			cm109_submit_buzz_toggle(dev);
+		} else if (likely(!dev->irq_urb_pending)) {
+			/* ask for key data */
+			dev->irq_urb_pending = 1;
+			error = usb_submit_urb(dev->urb_irq, GFP_ATOMIC);
+			if (error)
+				dev_err(&dev->intf->dev,
+					"%s: usb_submit_urb (urb_irq) failed %d\n",
+					__func__, error);
+		}
+	}
+
+	spin_unlock(&dev->ctl_submit_lock);
+}
+
+static void cm109_toggle_buzzer_async(struct cm109_dev *dev)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&dev->ctl_submit_lock, flags);
+
+	if (dev->ctl_urb_pending) {
+		/* URB completion will resubmit */
+		dev->buzzer_pending = 1;
+	} else {
+		dev->ctl_urb_pending = 1;
+		cm109_submit_buzz_toggle(dev);
+	}
+
+	spin_unlock_irqrestore(&dev->ctl_submit_lock, flags);
+}
+
+static void cm109_toggle_buzzer_sync(struct cm109_dev *dev, int on)
+{
+	int error;
+
+	if (on)
+		dev->ctl_data->byte[HID_OR0] |= BUZZER_ON;
+	else
+		dev->ctl_data->byte[HID_OR0] &= ~BUZZER_ON;
+
+	error = usb_control_msg(dev->udev,
+				usb_sndctrlpipe(dev->udev, 0),
+				dev->ctl_req->bRequest,
+				dev->ctl_req->bRequestType,
+				le16_to_cpu(dev->ctl_req->wValue),
+				le16_to_cpu(dev->ctl_req->wIndex),
+				dev->ctl_data,
+				USB_PKT_LEN, USB_CTRL_SET_TIMEOUT);
+	if (error < 0 && error != -EINTR)
+		dev_err(&dev->intf->dev, "%s: usb_control_msg() failed %d\n",
+			__func__, error);
+}
+
+static void cm109_stop_traffic(struct cm109_dev *dev)
+{
+	dev->shutdown = 1;
+	/*
+	 * Make sure other CPUs see this
+	 */
+	smp_wmb();
+
+	usb_kill_urb(dev->urb_ctl);
+	usb_kill_urb(dev->urb_irq);
+
+	cm109_toggle_buzzer_sync(dev, 0);
+
+	dev->shutdown = 0;
+	smp_wmb();
+}
+
+static void cm109_restore_state(struct cm109_dev *dev)
+{
+	if (dev->open) {
+		/*
+		 * Restore buzzer state.
+		 * This will also kick regular URB submission
+		 */
+		cm109_toggle_buzzer_async(dev);
+	}
+}
+
+/******************************************************************************
+ * input event interface
+ *****************************************************************************/
+
+static int cm109_input_open(struct input_dev *idev)
+{
+	struct cm109_dev *dev = input_get_drvdata(idev);
+	int error;
+
+	error = usb_autopm_get_interface(dev->intf);
+	if (error < 0) {
+		dev_err(&idev->dev, "%s - cannot autoresume, result %d\n",
+			__func__, error);
+		return error;
+	}
+
+	mutex_lock(&dev->pm_mutex);
+
+	dev->buzzer_state = 0;
+	dev->key_code = -1;	/* no keys pressed */
+	dev->keybit = 0xf;
+
+	/* issue INIT */
+	dev->ctl_data->byte[HID_OR0] = HID_OR_GPO_BUZ_SPDIF;
+	dev->ctl_data->byte[HID_OR1] = dev->keybit;
+	dev->ctl_data->byte[HID_OR2] = dev->keybit;
+	dev->ctl_data->byte[HID_OR3] = 0x00;
+
+	error = usb_submit_urb(dev->urb_ctl, GFP_KERNEL);
+	if (error)
+		dev_err(&dev->intf->dev, "%s: usb_submit_urb (urb_ctl) failed %d\n",
+			__func__, error);
+	else
+		dev->open = 1;
+
+	mutex_unlock(&dev->pm_mutex);
+
+	if (error)
+		usb_autopm_put_interface(dev->intf);
+
+	return error;
+}
+
+static void cm109_input_close(struct input_dev *idev)
+{
+	struct cm109_dev *dev = input_get_drvdata(idev);
+
+	mutex_lock(&dev->pm_mutex);
+
+	/*
+	 * Once we are here event delivery is stopped so we
+	 * don't need to worry about someone starting buzzer
+	 * again
+	 */
+	cm109_stop_traffic(dev);
+	dev->open = 0;
+
+	mutex_unlock(&dev->pm_mutex);
+
+	usb_autopm_put_interface(dev->intf);
+}
+
+static int cm109_input_ev(struct input_dev *idev, unsigned int type,
+			  unsigned int code, int value)
+{
+	struct cm109_dev *dev = input_get_drvdata(idev);
+
+	dev_dbg(&dev->intf->dev,
+		"input_ev: type=%u code=%u value=%d\n", type, code, value);
+
+	if (type != EV_SND)
+		return -EINVAL;
+
+	switch (code) {
+	case SND_TONE:
+	case SND_BELL:
+		dev->buzzer_state = !!value;
+		if (!dev->resetting)
+			cm109_toggle_buzzer_async(dev);
+		return 0;
+
+	default:
+		return -EINVAL;
+	}
+}
+
+
+/******************************************************************************
+ * Linux interface and usb initialisation
+ *****************************************************************************/
+
+struct driver_info {
+	char *name;
+};
+
+static const struct driver_info info_cm109 = {
+	.name = "CM109 USB driver",
+};
+
+enum {
+	VENDOR_ID        = 0x0d8c, /* C-Media Electronics */
+	PRODUCT_ID_CM109 = 0x000e, /* CM109 defines range 0x0008 - 0x000f */
+};
+
+/* table of devices that work with this driver */
+static const struct usb_device_id cm109_usb_table[] = {
+	{
+		.match_flags = USB_DEVICE_ID_MATCH_DEVICE |
+				USB_DEVICE_ID_MATCH_INT_INFO,
+		.idVendor = VENDOR_ID,
+		.idProduct = PRODUCT_ID_CM109,
+		.bInterfaceClass = USB_CLASS_HID,
+		.bInterfaceSubClass = 0,
+		.bInterfaceProtocol = 0,
+		.driver_info = (kernel_ulong_t) &info_cm109
+	},
+	/* you can add more devices here with product ID 0x0008 - 0x000f */
+	{ }
+};
+
+static void cm109_usb_cleanup(struct cm109_dev *dev)
+{
+	kfree(dev->ctl_req);
+	if (dev->ctl_data)
+		usb_free_coherent(dev->udev, USB_PKT_LEN,
+				  dev->ctl_data, dev->ctl_dma);
+	if (dev->irq_data)
+		usb_free_coherent(dev->udev, USB_PKT_LEN,
+				  dev->irq_data, dev->irq_dma);
+
+	usb_free_urb(dev->urb_irq);	/* parameter validation in core/urb */
+	usb_free_urb(dev->urb_ctl);	/* parameter validation in core/urb */
+	kfree(dev);
+}
+
+static void cm109_usb_disconnect(struct usb_interface *interface)
+{
+	struct cm109_dev *dev = usb_get_intfdata(interface);
+
+	usb_set_intfdata(interface, NULL);
+	input_unregister_device(dev->idev);
+	cm109_usb_cleanup(dev);
+}
+
+static int cm109_usb_probe(struct usb_interface *intf,
+			   const struct usb_device_id *id)
+{
+	struct usb_device *udev = interface_to_usbdev(intf);
+	struct driver_info *nfo = (struct driver_info *)id->driver_info;
+	struct usb_host_interface *interface;
+	struct usb_endpoint_descriptor *endpoint;
+	struct cm109_dev *dev;
+	struct input_dev *input_dev = NULL;
+	int ret, pipe, i;
+	int error = -ENOMEM;
+
+	interface = intf->cur_altsetting;
+	endpoint = &interface->endpoint[0].desc;
+
+	if (!usb_endpoint_is_int_in(endpoint))
+		return -ENODEV;
+
+	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+	if (!dev)
+		return -ENOMEM;
+
+	spin_lock_init(&dev->ctl_submit_lock);
+	mutex_init(&dev->pm_mutex);
+
+	dev->udev = udev;
+	dev->intf = intf;
+
+	dev->idev = input_dev = input_allocate_device();
+	if (!input_dev)
+		goto err_out;
+
+	/* allocate usb buffers */
+	dev->irq_data = usb_alloc_coherent(udev, USB_PKT_LEN,
+					   GFP_KERNEL, &dev->irq_dma);
+	if (!dev->irq_data)
+		goto err_out;
+
+	dev->ctl_data = usb_alloc_coherent(udev, USB_PKT_LEN,
+					   GFP_KERNEL, &dev->ctl_dma);
+	if (!dev->ctl_data)
+		goto err_out;
+
+	dev->ctl_req = kmalloc(sizeof(*(dev->ctl_req)), GFP_KERNEL);
+	if (!dev->ctl_req)
+		goto err_out;
+
+	/* allocate urb structures */
+	dev->urb_irq = usb_alloc_urb(0, GFP_KERNEL);
+	if (!dev->urb_irq)
+		goto err_out;
+
+	dev->urb_ctl = usb_alloc_urb(0, GFP_KERNEL);
+	if (!dev->urb_ctl)
+		goto err_out;
+
+	/* get a handle to the interrupt data pipe */
+	pipe = usb_rcvintpipe(udev, endpoint->bEndpointAddress);
+	ret = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
+	if (ret != USB_PKT_LEN)
+		dev_err(&intf->dev, "invalid payload size %d, expected %d\n",
+			ret, USB_PKT_LEN);
+
+	/* initialise irq urb */
+	usb_fill_int_urb(dev->urb_irq, udev, pipe, dev->irq_data,
+			 USB_PKT_LEN,
+			 cm109_urb_irq_callback, dev, endpoint->bInterval);
+	dev->urb_irq->transfer_dma = dev->irq_dma;
+	dev->urb_irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+	dev->urb_irq->dev = udev;
+
+	/* initialise ctl urb */
+	dev->ctl_req->bRequestType = USB_TYPE_CLASS | USB_RECIP_INTERFACE |
+					USB_DIR_OUT;
+	dev->ctl_req->bRequest = USB_REQ_SET_CONFIGURATION;
+	dev->ctl_req->wValue = cpu_to_le16(0x200);
+	dev->ctl_req->wIndex = cpu_to_le16(interface->desc.bInterfaceNumber);
+	dev->ctl_req->wLength = cpu_to_le16(USB_PKT_LEN);
+
+	usb_fill_control_urb(dev->urb_ctl, udev, usb_sndctrlpipe(udev, 0),
+			     (void *)dev->ctl_req, dev->ctl_data, USB_PKT_LEN,
+			     cm109_urb_ctl_callback, dev);
+	dev->urb_ctl->transfer_dma = dev->ctl_dma;
+	dev->urb_ctl->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+	dev->urb_ctl->dev = udev;
+
+	/* find out the physical bus location */
+	usb_make_path(udev, dev->phys, sizeof(dev->phys));
+	strlcat(dev->phys, "/input0", sizeof(dev->phys));
+
+	/* register settings for the input device */
+	input_dev->name = nfo->name;
+	input_dev->phys = dev->phys;
+	usb_to_input_id(udev, &input_dev->id);
+	input_dev->dev.parent = &intf->dev;
+
+	input_set_drvdata(input_dev, dev);
+	input_dev->open = cm109_input_open;
+	input_dev->close = cm109_input_close;
+	input_dev->event = cm109_input_ev;
+
+	input_dev->keycode = dev->keymap;
+	input_dev->keycodesize = sizeof(unsigned char);
+	input_dev->keycodemax = ARRAY_SIZE(dev->keymap);
+
+	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_SND);
+	input_dev->sndbit[0] = BIT_MASK(SND_BELL) | BIT_MASK(SND_TONE);
+
+	/* register available key events */
+	for (i = 0; i < KEYMAP_SIZE; i++) {
+		unsigned short k = keymap(i);
+		dev->keymap[i] = k;
+		__set_bit(k, input_dev->keybit);
+	}
+	__clear_bit(KEY_RESERVED, input_dev->keybit);
+
+	error = input_register_device(dev->idev);
+	if (error)
+		goto err_out;
+
+	usb_set_intfdata(intf, dev);
+
+	return 0;
+
+ err_out:
+	input_free_device(input_dev);
+	cm109_usb_cleanup(dev);
+	return error;
+}
+
+static int cm109_usb_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	struct cm109_dev *dev = usb_get_intfdata(intf);
+
+	dev_info(&intf->dev, "cm109: usb_suspend (event=%d)\n", message.event);
+
+	mutex_lock(&dev->pm_mutex);
+	cm109_stop_traffic(dev);
+	mutex_unlock(&dev->pm_mutex);
+
+	return 0;
+}
+
+static int cm109_usb_resume(struct usb_interface *intf)
+{
+	struct cm109_dev *dev = usb_get_intfdata(intf);
+
+	dev_info(&intf->dev, "cm109: usb_resume\n");
+
+	mutex_lock(&dev->pm_mutex);
+	cm109_restore_state(dev);
+	mutex_unlock(&dev->pm_mutex);
+
+	return 0;
+}
+
+static int cm109_usb_pre_reset(struct usb_interface *intf)
+{
+	struct cm109_dev *dev = usb_get_intfdata(intf);
+
+	mutex_lock(&dev->pm_mutex);
+
+	/*
+	 * Make sure input events don't try to toggle buzzer
+	 * while we are resetting
+	 */
+	dev->resetting = 1;
+	smp_wmb();
+
+	cm109_stop_traffic(dev);
+
+	return 0;
+}
+
+static int cm109_usb_post_reset(struct usb_interface *intf)
+{
+	struct cm109_dev *dev = usb_get_intfdata(intf);
+
+	dev->resetting = 0;
+	smp_wmb();
+
+	cm109_restore_state(dev);
+
+	mutex_unlock(&dev->pm_mutex);
+
+	return 0;
+}
+
+static struct usb_driver cm109_driver = {
+	.name		= "cm109",
+	.probe		= cm109_usb_probe,
+	.disconnect	= cm109_usb_disconnect,
+	.suspend	= cm109_usb_suspend,
+	.resume		= cm109_usb_resume,
+	.reset_resume	= cm109_usb_resume,
+	.pre_reset	= cm109_usb_pre_reset,
+	.post_reset	= cm109_usb_post_reset,
+	.id_table	= cm109_usb_table,
+	.supports_autosuspend = 1,
+};
+
+static int __init cm109_select_keymap(void)
+{
+	/* Load the phone keymap */
+	if (!strcasecmp(phone, "kip1000")) {
+		keymap = keymap_kip1000;
+		printk(KERN_INFO KBUILD_MODNAME ": "
+			"Keymap for Komunikate KIP1000 phone loaded\n");
+	} else if (!strcasecmp(phone, "gtalk")) {
+		keymap = keymap_gtalk;
+		printk(KERN_INFO KBUILD_MODNAME ": "
+			"Keymap for Genius G-talk phone loaded\n");
+	} else if (!strcasecmp(phone, "usbph01")) {
+		keymap = keymap_usbph01;
+		printk(KERN_INFO KBUILD_MODNAME ": "
+			"Keymap for Allied-Telesis Corega USBPH01 phone loaded\n");
+	} else if (!strcasecmp(phone, "atcom")) {
+		keymap = keymap_atcom;
+		printk(KERN_INFO KBUILD_MODNAME ": "
+			"Keymap for ATCom AU-100 phone loaded\n");
+	} else {
+		printk(KERN_ERR KBUILD_MODNAME ": "
+			"Unsupported phone: %s\n", phone);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int __init cm109_init(void)
+{
+	int err;
+
+	err = cm109_select_keymap();
+	if (err)
+		return err;
+
+	err = usb_register(&cm109_driver);
+	if (err)
+		return err;
+
+	printk(KERN_INFO KBUILD_MODNAME ": "
+		DRIVER_DESC ": " DRIVER_VERSION " (C) " DRIVER_AUTHOR "\n");
+
+	return 0;
+}
+
+static void __exit cm109_exit(void)
+{
+	usb_deregister(&cm109_driver);
+}
+
+module_init(cm109_init);
+module_exit(cm109_exit);
+
+MODULE_DEVICE_TABLE(usb, cm109_usb_table);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");