Linux-libre 4.2-gnu

15 files changed, 617 insertions, 26 deletions

diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 4436ab1b9..d4f0a817e 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -610,6 +610,16 @@ config INPUT_DA9055_ONKEY
 	  To compile this driver as a module, choose M here: the module
 	  will be called da9055_onkey.
 
+config INPUT_DA9063_ONKEY
+	tristate "Dialog DA9063 OnKey"
+	depends on MFD_DA9063
+	help
+	  Support the ONKEY of Dialog DA9063 Power Management IC as an
+	  input device reporting power button statue.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called da9063_onkey.
+
 config INPUT_DM355EVM
 	tristate "TI DaVinci DM355 EVM Keypad and IR Remote"
 	depends on MFD_DM355EVM_MSP
@@ -775,6 +785,17 @@ config INPUT_DRV260X_HAPTICS
 	  To compile this driver as a module, choose M here: the
 	  module will be called drv260x-haptics.
 
+config INPUT_DRV2665_HAPTICS
+	tristate "TI DRV2665 haptics support"
+	depends on INPUT && I2C
+	select INPUT_FF_MEMLESS
+	select REGMAP_I2C
+	help
+	  Say Y to enable support for the TI DRV2665 haptics driver.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called drv2665-haptics.
+
 config INPUT_DRV2667_HAPTICS
 	tristate "TI DRV2667 haptics support"
 	depends on INPUT && I2C
@@ -784,6 +805,6 @@ config INPUT_DRV2667_HAPTICS
 	  Say Y to enable support for the TI DRV2667 haptics driver.
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called drv260x-haptics.
+	  module will be called drv2667-haptics.
 
 endif
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 78ba4c1b8..53df07dcc 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -25,9 +25,11 @@ obj-$(CONFIG_INPUT_CMA3000_I2C)		+= cma3000_d0x_i2c.o
 obj-$(CONFIG_INPUT_COBALT_BTNS)		+= cobalt_btns.o
 obj-$(CONFIG_INPUT_DA9052_ONKEY)	+= da9052_onkey.o
 obj-$(CONFIG_INPUT_DA9055_ONKEY)	+= da9055_onkey.o
+obj-$(CONFIG_INPUT_DA9063_ONKEY)	+= da9063_onkey.o
 obj-$(CONFIG_INPUT_DM355EVM)		+= dm355evm_keys.o
 obj-$(CONFIG_INPUT_E3X0_BUTTON)		+= e3x0-button.o
 obj-$(CONFIG_INPUT_DRV260X_HAPTICS)	+= drv260x.o
+obj-$(CONFIG_INPUT_DRV2665_HAPTICS)	+= drv2665.o
 obj-$(CONFIG_INPUT_DRV2667_HAPTICS)	+= drv2667.o
 obj-$(CONFIG_INPUT_GP2A)		+= gp2ap002a00f.o
 obj-$(CONFIG_INPUT_GPIO_BEEPER)		+= gpio-beeper.o
diff --git a/drivers/input/misc/adxl34x-i2c.c b/drivers/input/misc/adxl34x-i2c.c
index 470bfd6f0..bdb5d03b2 100644
--- a/drivers/input/misc/adxl34x-i2c.c
+++ b/drivers/input/misc/adxl34x-i2c.c
@@ -10,6 +10,7 @@
 #include <linux/input.h>	/* BUS_I2C */
 #include <linux/i2c.h>
 #include <linux/module.h>
+#include <linux/of.h>
 #include <linux/types.h>
 #include <linux/pm.h>
 #include "adxl34x.h"
@@ -135,11 +136,31 @@ static const struct i2c_device_id adxl34x_id[] = {
 
 MODULE_DEVICE_TABLE(i2c, adxl34x_id);
 
+#ifdef CONFIG_OF
+static const struct of_device_id adxl34x_of_id[] = {
+	/*
+	 * The ADXL346 is backward-compatible with the ADXL345. Differences are
+	 * handled by runtime detection of the device model, there's thus no
+	 * need for listing the "adi,adxl346" compatible value explicitly.
+	 */
+	{ .compatible = "adi,adxl345", },
+	/*
+	 * Deprecated, DT nodes should use one or more of the device-specific
+	 * compatible values "adi,adxl345" and "adi,adxl346".
+	 */
+	{ .compatible = "adi,adxl34x", },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(of, adxl34x_of_id);
+#endif
+
 static struct i2c_driver adxl34x_driver = {
 	.driver = {
 		.name = "adxl34x",
 		.owner = THIS_MODULE,
 		.pm = &adxl34x_i2c_pm,
+		.of_match_table = of_match_ptr(adxl34x_of_id),
 	},
 	.probe    = adxl34x_i2c_probe,
 	.remove   = adxl34x_i2c_remove,
diff --git a/drivers/input/misc/ati_remote2.c b/drivers/input/misc/ati_remote2.c
index f63341f20..cfd58e87d 100644
--- a/drivers/input/misc/ati_remote2.c
+++ b/drivers/input/misc/ati_remote2.c
@@ -94,7 +94,7 @@ static int ati_remote2_get_mode_mask(char *buffer,
 
 static unsigned int channel_mask = ATI_REMOTE2_MAX_CHANNEL_MASK;
 #define param_check_channel_mask(name, p) __param_check(name, p, unsigned int)
-static struct kernel_param_ops param_ops_channel_mask = {
+static const struct kernel_param_ops param_ops_channel_mask = {
 	.set = ati_remote2_set_channel_mask,
 	.get = ati_remote2_get_channel_mask,
 };
@@ -103,7 +103,7 @@ MODULE_PARM_DESC(channel_mask, "Bitmask of channels to accept <15:Channel16>...<
 
 static unsigned int mode_mask = ATI_REMOTE2_MAX_MODE_MASK;
 #define param_check_mode_mask(name, p) __param_check(name, p, unsigned int)
-static struct kernel_param_ops param_ops_mode_mask = {
+static const struct kernel_param_ops param_ops_mode_mask = {
 	.set = ati_remote2_set_mode_mask,
 	.get = ati_remote2_get_mode_mask,
 };
diff --git a/drivers/input/misc/axp20x-pek.c b/drivers/input/misc/axp20x-pek.c
index f1c844739..1ac898db3 100644
--- a/drivers/input/misc/axp20x-pek.c
+++ b/drivers/input/misc/axp20x-pek.c
@@ -167,9 +167,13 @@ static irqreturn_t axp20x_pek_irq(int irq, void *pwr)
 	struct input_dev *idev = pwr;
 	struct axp20x_pek *axp20x_pek = input_get_drvdata(idev);
 
-	if (irq == axp20x_pek->irq_dbr)
+	/*
+	 * The power-button is connected to ground so a falling edge (dbf)
+	 * means it is pressed.
+	 */
+	if (irq == axp20x_pek->irq_dbf)
 		input_report_key(idev, KEY_POWER, true);
-	else if (irq == axp20x_pek->irq_dbf)
+	else if (irq == axp20x_pek->irq_dbr)
 		input_report_key(idev, KEY_POWER, false);
 
 	input_sync(idev);
@@ -288,3 +292,4 @@ module_platform_driver(axp20x_pek_driver);
 MODULE_DESCRIPTION("axp20x Power Button");
 MODULE_AUTHOR("Carlo Caione <carlo@caione.org>");
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:axp20x-pek");
diff --git a/drivers/input/misc/da9063_onkey.c b/drivers/input/misc/da9063_onkey.c
new file mode 100644
index 000000000..f577585ef
--- /dev/null
+++ b/drivers/input/misc/da9063_onkey.c
@@ -0,0 +1,226 @@
+/*
+ * OnKey device driver for DA9063
+ * Copyright (C) 2015  Dialog Semiconductor Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/workqueue.h>
+#include <linux/regmap.h>
+#include <linux/of.h>
+#include <linux/mfd/da9063/core.h>
+#include <linux/mfd/da9063/pdata.h>
+#include <linux/mfd/da9063/registers.h>
+
+struct da9063_onkey {
+	struct da9063 *hw;
+	struct delayed_work work;
+	struct input_dev *input;
+	struct device *dev;
+	bool key_power;
+};
+
+static void da9063_poll_on(struct work_struct *work)
+{
+	struct da9063_onkey *onkey = container_of(work, struct da9063_onkey,
+						  work.work);
+	unsigned int val;
+	int fault_log = 0;
+	bool poll = true;
+	int error;
+
+	/* Poll to see when the pin is released */
+	error = regmap_read(onkey->hw->regmap, DA9063_REG_STATUS_A, &val);
+	if (error) {
+		dev_err(onkey->dev,
+			"Failed to read ON status: %d\n", error);
+		goto err_poll;
+	}
+
+	if (!(val & DA9063_NONKEY)) {
+		error = regmap_update_bits(onkey->hw->regmap,
+					   DA9063_REG_CONTROL_B,
+					   DA9063_NONKEY_LOCK, 0);
+		if (error) {
+			dev_err(onkey->dev,
+				"Failed to reset the Key Delay %d\n", error);
+			goto err_poll;
+		}
+
+		input_report_key(onkey->input, KEY_POWER, 0);
+		input_sync(onkey->input);
+
+		poll = false;
+	}
+
+	/*
+	 * If the fault log KEY_RESET is detected, then clear it
+	 * and shut down the system.
+	 */
+	error = regmap_read(onkey->hw->regmap,
+			    DA9063_REG_FAULT_LOG, &fault_log);
+	if (error) {
+		dev_warn(&onkey->input->dev,
+			 "Cannot read FAULT_LOG: %d\n", error);
+	} else if (fault_log & DA9063_KEY_RESET) {
+		error = regmap_write(onkey->hw->regmap,
+				     DA9063_REG_FAULT_LOG,
+				     DA9063_KEY_RESET);
+		if (error) {
+			dev_warn(&onkey->input->dev,
+				 "Cannot reset KEY_RESET fault log: %d\n",
+				 error);
+		} else {
+			/* at this point we do any S/W housekeeping
+			 * and then send shutdown command
+			 */
+			dev_dbg(&onkey->input->dev,
+				 "Sending SHUTDOWN to DA9063 ...\n");
+			error = regmap_write(onkey->hw->regmap,
+					     DA9063_REG_CONTROL_F,
+					     DA9063_SHUTDOWN);
+			if (error)
+				dev_err(&onkey->input->dev,
+					"Cannot SHUTDOWN DA9063: %d\n",
+					error);
+		}
+	}
+
+err_poll:
+	if (poll)
+		schedule_delayed_work(&onkey->work, msecs_to_jiffies(50));
+}
+
+static irqreturn_t da9063_onkey_irq_handler(int irq, void *data)
+{
+	struct da9063_onkey *onkey = data;
+	unsigned int val;
+	int error;
+
+	error = regmap_read(onkey->hw->regmap, DA9063_REG_STATUS_A, &val);
+	if (onkey->key_power && !error && (val & DA9063_NONKEY)) {
+		input_report_key(onkey->input, KEY_POWER, 1);
+		input_sync(onkey->input);
+		schedule_delayed_work(&onkey->work, 0);
+		dev_dbg(onkey->dev, "KEY_POWER pressed.\n");
+	} else {
+		input_report_key(onkey->input, KEY_SLEEP, 1);
+		input_sync(onkey->input);
+		input_report_key(onkey->input, KEY_SLEEP, 0);
+		input_sync(onkey->input);
+		dev_dbg(onkey->dev, "KEY_SLEEP pressed.\n");
+	}
+
+	return IRQ_HANDLED;
+}
+
+static void da9063_cancel_poll(void *data)
+{
+	struct da9063_onkey *onkey = data;
+
+	cancel_delayed_work_sync(&onkey->work);
+}
+
+static int da9063_onkey_probe(struct platform_device *pdev)
+{
+	struct da9063 *da9063 = dev_get_drvdata(pdev->dev.parent);
+	struct da9063_pdata *pdata = dev_get_platdata(da9063->dev);
+	struct da9063_onkey *onkey;
+	int irq;
+	int error;
+
+	onkey = devm_kzalloc(&pdev->dev, sizeof(struct da9063_onkey),
+			     GFP_KERNEL);
+	if (!onkey) {
+		dev_err(&pdev->dev, "Failed to allocate memory.\n");
+		return -ENOMEM;
+	}
+
+	onkey->dev = &pdev->dev;
+	onkey->hw = da9063;
+
+	if (pdata)
+		onkey->key_power = pdata->key_power;
+	else
+		onkey->key_power =
+			!of_property_read_bool(pdev->dev.of_node,
+					       "dlg,disable-key-power");
+
+	onkey->input = devm_input_allocate_device(&pdev->dev);
+	if (!onkey->input) {
+		dev_err(&pdev->dev, "Failed to allocated input device.\n");
+		return -ENOMEM;
+	}
+
+	onkey->input->name = DA9063_DRVNAME_ONKEY;
+	onkey->input->phys = DA9063_DRVNAME_ONKEY "/input0";
+	onkey->input->dev.parent = &pdev->dev;
+
+	if (onkey->key_power)
+		input_set_capability(onkey->input, EV_KEY, KEY_POWER);
+
+	input_set_capability(onkey->input, EV_KEY, KEY_SLEEP);
+
+	INIT_DELAYED_WORK(&onkey->work, da9063_poll_on);
+
+	error = devm_add_action(&pdev->dev, da9063_cancel_poll, onkey);
+	if (error) {
+		dev_err(&pdev->dev,
+			"Failed to add cancel poll action: %d\n",
+			error);
+		return error;
+	}
+
+	irq = platform_get_irq_byname(pdev, "ONKEY");
+	if (irq < 0) {
+		error = irq;
+		dev_err(&pdev->dev, "Failed to get platform IRQ: %d\n", error);
+		return error;
+	}
+
+	error = devm_request_threaded_irq(&pdev->dev, irq,
+					  NULL, da9063_onkey_irq_handler,
+					  IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+					  "ONKEY", onkey);
+	if (error) {
+		dev_err(&pdev->dev,
+			"Failed to request IRQ %d: %d\n", irq, error);
+		return error;
+	}
+
+	error = input_register_device(onkey->input);
+	if (error) {
+		dev_err(&pdev->dev,
+			"Failed to register input device: %d\n", error);
+		return error;
+	}
+
+	platform_set_drvdata(pdev, onkey);
+	return 0;
+}
+
+static struct platform_driver da9063_onkey_driver = {
+	.probe	= da9063_onkey_probe,
+	.driver	= {
+		.name	= DA9063_DRVNAME_ONKEY,
+	},
+};
+module_platform_driver(da9063_onkey_driver);
+
+MODULE_AUTHOR("S Twiss <stwiss.opensource@diasemi.com>");
+MODULE_DESCRIPTION("Onkey device driver for Dialog DA9063");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DA9063_DRVNAME_ONKEY);
diff --git a/drivers/input/misc/drv260x.c b/drivers/input/misc/drv260x.c
index 599578042..e5d60ecd2 100644
--- a/drivers/input/misc/drv260x.c
+++ b/drivers/input/misc/drv260x.c
@@ -580,15 +580,10 @@ static int drv260x_probe(struct i2c_client *client,
 		return error;
 	}
 
-	haptics->enable_gpio = devm_gpiod_get(&client->dev, "enable");
-	if (IS_ERR(haptics->enable_gpio)) {
-		error = PTR_ERR(haptics->enable_gpio);
-		if (error != -ENOENT && error != -ENOSYS)
-			return error;
-		haptics->enable_gpio = NULL;
-	} else {
-		gpiod_direction_output(haptics->enable_gpio, 1);
-	}
+	haptics->enable_gpio = devm_gpiod_get_optional(&client->dev, "enable",
+						       GPIOD_OUT_HIGH);
+	if (IS_ERR(haptics->enable_gpio))
+		return PTR_ERR(haptics->enable_gpio);
 
 	haptics->input_dev = devm_input_allocate_device(&client->dev);
 	if (!haptics->input_dev) {
diff --git a/drivers/input/misc/drv2665.c b/drivers/input/misc/drv2665.c
new file mode 100644
index 000000000..0afaa33de
--- /dev/null
+++ b/drivers/input/misc/drv2665.c
@@ -0,0 +1,322 @@
+/*
+ * DRV2665 haptics driver family
+ *
+ * Author: Dan Murphy <dmurphy@ti.com>
+ *
+ * Copyright: (C) 2015 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/regulator/consumer.h>
+
+/* Contol registers */
+#define DRV2665_STATUS	0x00
+#define DRV2665_CTRL_1	0x01
+#define DRV2665_CTRL_2	0x02
+#define DRV2665_FIFO	0x0b
+
+/* Status Register */
+#define DRV2665_FIFO_FULL		BIT(0)
+#define DRV2665_FIFO_EMPTY		BIT(1)
+
+/* Control 1 Register */
+#define DRV2665_25_VPP_GAIN		0x00
+#define DRV2665_50_VPP_GAIN		0x01
+#define DRV2665_75_VPP_GAIN		0x02
+#define DRV2665_100_VPP_GAIN		0x03
+#define DRV2665_DIGITAL_IN		0xfc
+#define DRV2665_ANALOG_IN		BIT(2)
+
+/* Control 2 Register */
+#define DRV2665_BOOST_EN		BIT(1)
+#define DRV2665_STANDBY			BIT(6)
+#define DRV2665_DEV_RST			BIT(7)
+#define DRV2665_5_MS_IDLE_TOUT		0x00
+#define DRV2665_10_MS_IDLE_TOUT		0x04
+#define DRV2665_15_MS_IDLE_TOUT		0x08
+#define DRV2665_20_MS_IDLE_TOUT		0x0c
+
+/**
+ * struct drv2665_data -
+ * @input_dev - Pointer to the input device
+ * @client - Pointer to the I2C client
+ * @regmap - Register map of the device
+ * @work - Work item used to off load the enable/disable of the vibration
+ * @regulator - Pointer to the regulator for the IC
+ */
+struct drv2665_data {
+	struct input_dev *input_dev;
+	struct i2c_client *client;
+	struct regmap *regmap;
+	struct work_struct work;
+	struct regulator *regulator;
+};
+
+/* 8kHz Sine wave to stream to the FIFO */
+static const u8 drv2665_sine_wave_form[] = {
+	0x00, 0x10, 0x20, 0x2e, 0x3c, 0x48, 0x53, 0x5b, 0x61, 0x65, 0x66,
+	0x65, 0x61, 0x5b, 0x53, 0x48, 0x3c, 0x2e, 0x20, 0x10,
+	0x00, 0xf0, 0xe0, 0xd2, 0xc4, 0xb8, 0xad, 0xa5, 0x9f, 0x9b, 0x9a,
+	0x9b, 0x9f, 0xa5, 0xad, 0xb8, 0xc4, 0xd2, 0xe0, 0xf0, 0x00,
+};
+
+static struct reg_default drv2665_reg_defs[] = {
+	{ DRV2665_STATUS, 0x02 },
+	{ DRV2665_CTRL_1, 0x28 },
+	{ DRV2665_CTRL_2, 0x40 },
+	{ DRV2665_FIFO, 0x00 },
+};
+
+static void drv2665_worker(struct work_struct *work)
+{
+	struct drv2665_data *haptics =
+				container_of(work, struct drv2665_data, work);
+	unsigned int read_buf;
+	int error;
+
+	error = regmap_read(haptics->regmap, DRV2665_STATUS, &read_buf);
+	if (error) {
+		dev_err(&haptics->client->dev,
+			"Failed to read status: %d\n", error);
+		return;
+	}
+
+	if (read_buf & DRV2665_FIFO_EMPTY) {
+		error = regmap_bulk_write(haptics->regmap,
+					  DRV2665_FIFO,
+					  drv2665_sine_wave_form,
+					  ARRAY_SIZE(drv2665_sine_wave_form));
+		if (error) {
+			dev_err(&haptics->client->dev,
+				"Failed to write FIFO: %d\n", error);
+			return;
+		}
+	}
+}
+
+static int drv2665_haptics_play(struct input_dev *input, void *data,
+				struct ff_effect *effect)
+{
+	struct drv2665_data *haptics = input_get_drvdata(input);
+
+	schedule_work(&haptics->work);
+
+	return 0;
+}
+
+static void drv2665_close(struct input_dev *input)
+{
+	struct drv2665_data *haptics = input_get_drvdata(input);
+	int error;
+
+	cancel_work_sync(&haptics->work);
+
+	error = regmap_update_bits(haptics->regmap,
+				   DRV2665_CTRL_2, DRV2665_STANDBY, 1);
+	if (error)
+		dev_err(&haptics->client->dev,
+			"Failed to enter standby mode: %d\n", error);
+}
+
+static const struct reg_default drv2665_init_regs[] = {
+	{ DRV2665_CTRL_2, 0 | DRV2665_10_MS_IDLE_TOUT },
+	{ DRV2665_CTRL_1, DRV2665_25_VPP_GAIN },
+};
+
+static int drv2665_init(struct drv2665_data *haptics)
+{
+	int error;
+
+	error = regmap_register_patch(haptics->regmap,
+				      drv2665_init_regs,
+				      ARRAY_SIZE(drv2665_init_regs));
+	if (error) {
+		dev_err(&haptics->client->dev,
+			"Failed to write init registers: %d\n",
+			error);
+		return error;
+	}
+
+	return 0;
+}
+
+static const struct regmap_config drv2665_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = DRV2665_FIFO,
+	.reg_defaults = drv2665_reg_defs,
+	.num_reg_defaults = ARRAY_SIZE(drv2665_reg_defs),
+	.cache_type = REGCACHE_NONE,
+};
+
+static int drv2665_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct drv2665_data *haptics;
+	int error;
+
+	haptics = devm_kzalloc(&client->dev, sizeof(*haptics), GFP_KERNEL);
+	if (!haptics)
+		return -ENOMEM;
+
+	haptics->regulator = devm_regulator_get(&client->dev, "vbat");
+	if (IS_ERR(haptics->regulator)) {
+		error = PTR_ERR(haptics->regulator);
+		dev_err(&client->dev,
+			"unable to get regulator, error: %d\n", error);
+		return error;
+	}
+
+	haptics->input_dev = devm_input_allocate_device(&client->dev);
+	if (!haptics->input_dev) {
+		dev_err(&client->dev, "Failed to allocate input device\n");
+		return -ENOMEM;
+	}
+
+	haptics->input_dev->name = "drv2665:haptics";
+	haptics->input_dev->dev.parent = client->dev.parent;
+	haptics->input_dev->close = drv2665_close;
+	input_set_drvdata(haptics->input_dev, haptics);
+	input_set_capability(haptics->input_dev, EV_FF, FF_RUMBLE);
+
+	error = input_ff_create_memless(haptics->input_dev, NULL,
+					drv2665_haptics_play);
+	if (error) {
+		dev_err(&client->dev, "input_ff_create() failed: %d\n",
+			error);
+		return error;
+	}
+
+	INIT_WORK(&haptics->work, drv2665_worker);
+
+	haptics->client = client;
+	i2c_set_clientdata(client, haptics);
+
+	haptics->regmap = devm_regmap_init_i2c(client, &drv2665_regmap_config);
+	if (IS_ERR(haptics->regmap)) {
+		error = PTR_ERR(haptics->regmap);
+		dev_err(&client->dev, "Failed to allocate register map: %d\n",
+			error);
+		return error;
+	}
+
+	error = drv2665_init(haptics);
+	if (error) {
+		dev_err(&client->dev, "Device init failed: %d\n", error);
+		return error;
+	}
+
+	error = input_register_device(haptics->input_dev);
+	if (error) {
+		dev_err(&client->dev, "couldn't register input device: %d\n",
+			error);
+		return error;
+	}
+
+	return 0;
+}
+
+static int __maybe_unused drv2665_suspend(struct device *dev)
+{
+	struct drv2665_data *haptics = dev_get_drvdata(dev);
+	int ret = 0;
+
+	mutex_lock(&haptics->input_dev->mutex);
+
+	if (haptics->input_dev->users) {
+		ret = regmap_update_bits(haptics->regmap, DRV2665_CTRL_2,
+				DRV2665_STANDBY, 1);
+		if (ret) {
+			dev_err(dev, "Failed to set standby mode\n");
+			regulator_disable(haptics->regulator);
+			goto out;
+		}
+
+		ret = regulator_disable(haptics->regulator);
+		if (ret) {
+			dev_err(dev, "Failed to disable regulator\n");
+			regmap_update_bits(haptics->regmap,
+					   DRV2665_CTRL_2,
+					   DRV2665_STANDBY, 0);
+		}
+	}
+out:
+	mutex_unlock(&haptics->input_dev->mutex);
+	return ret;
+}
+
+static int __maybe_unused drv2665_resume(struct device *dev)
+{
+	struct drv2665_data *haptics = dev_get_drvdata(dev);
+	int ret = 0;
+
+	mutex_lock(&haptics->input_dev->mutex);
+
+	if (haptics->input_dev->users) {
+		ret = regulator_enable(haptics->regulator);
+		if (ret) {
+			dev_err(dev, "Failed to enable regulator\n");
+			goto out;
+		}
+
+		ret = regmap_update_bits(haptics->regmap, DRV2665_CTRL_2,
+					 DRV2665_STANDBY, 0);
+		if (ret) {
+			dev_err(dev, "Failed to unset standby mode\n");
+			regulator_disable(haptics->regulator);
+			goto out;
+		}
+
+	}
+
+out:
+	mutex_unlock(&haptics->input_dev->mutex);
+	return ret;
+}
+
+static SIMPLE_DEV_PM_OPS(drv2665_pm_ops, drv2665_suspend, drv2665_resume);
+
+static const struct i2c_device_id drv2665_id[] = {
+	{ "drv2665", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, drv2665_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id drv2665_of_match[] = {
+	{ .compatible = "ti,drv2665", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, drv2665_of_match);
+#endif
+
+static struct i2c_driver drv2665_driver = {
+	.probe		= drv2665_probe,
+	.driver		= {
+		.name	= "drv2665-haptics",
+		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(drv2665_of_match),
+		.pm	= &drv2665_pm_ops,
+	},
+	.id_table = drv2665_id,
+};
+module_i2c_driver(drv2665_driver);
+
+MODULE_DESCRIPTION("TI DRV2665 haptics driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>");
diff --git a/drivers/input/misc/gpio-beeper.c b/drivers/input/misc/gpio-beeper.c
index 4817c5f0c..16272fffe 100644
--- a/drivers/input/misc/gpio-beeper.c
+++ b/drivers/input/misc/gpio-beeper.c
@@ -66,13 +66,12 @@ static int gpio_beeper_probe(struct platform_device *pdev)
 {
 	struct gpio_beeper *beep;
 	struct input_dev *input;
-	int err;
 
 	beep = devm_kzalloc(&pdev->dev, sizeof(*beep), GFP_KERNEL);
 	if (!beep)
 		return -ENOMEM;
 
-	beep->desc = devm_gpiod_get(&pdev->dev, NULL);
+	beep->desc = devm_gpiod_get(&pdev->dev, NULL, GPIOD_OUT_LOW);
 	if (IS_ERR(beep->desc))
 		return PTR_ERR(beep->desc);
 
@@ -92,10 +91,6 @@ static int gpio_beeper_probe(struct platform_device *pdev)
 
 	input_set_capability(input, EV_SND, SND_BELL);
 
-	err = gpiod_direction_output(beep->desc, 0);
-	if (err)
-		return err;
-
 	input_set_drvdata(input, beep);
 
 	return input_register_device(input);
diff --git a/drivers/input/misc/retu-pwrbutton.c b/drivers/input/misc/retu-pwrbutton.c
index 0c8ac60e2..30b459b6b 100644
--- a/drivers/input/misc/retu-pwrbutton.c
+++ b/drivers/input/misc/retu-pwrbutton.c
@@ -63,7 +63,8 @@ static int retu_pwrbutton_probe(struct platform_device *pdev)
 	input_set_drvdata(idev, rdev);
 
 	error = devm_request_threaded_irq(&pdev->dev, irq,
-					  NULL, retu_pwrbutton_irq, 0,
+					  NULL, retu_pwrbutton_irq,
+					  IRQF_ONESHOT,
 					  "retu-pwrbutton", idev);
 	if (error)
 		return error;
diff --git a/drivers/input/misc/soc_button_array.c b/drivers/input/misc/soc_button_array.c
index e8e010a85..c14b82709 100644
--- a/drivers/input/misc/soc_button_array.c
+++ b/drivers/input/misc/soc_button_array.c
@@ -18,7 +18,6 @@
 #include <linux/gpio/consumer.h>
 #include <linux/gpio_keys.h>
 #include <linux/platform_device.h>
-#include <linux/acpi.h>
 
 /*
  * Definition of buttons on the tablet. The ACPI index of each button
diff --git a/drivers/input/misc/twl4030-pwrbutton.c b/drivers/input/misc/twl4030-pwrbutton.c
index e98cc81a8..603fc2fad 100644
--- a/drivers/input/misc/twl4030-pwrbutton.c
+++ b/drivers/input/misc/twl4030-pwrbutton.c
@@ -71,7 +71,8 @@ static int twl4030_pwrbutton_probe(struct platform_device *pdev)
 	pwr->dev.parent = &pdev->dev;
 
 	err = devm_request_threaded_irq(&pwr->dev, irq, NULL, powerbutton_irq,
-			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING |
+			IRQF_ONESHOT,
 			"twl4030_pwrbutton", pwr);
 	if (err < 0) {
 		dev_err(&pdev->dev, "Can't get IRQ for pwrbutton: %d\n", err);
diff --git a/drivers/input/misc/twl4030-vibra.c b/drivers/input/misc/twl4030-vibra.c
index fc17b9592..10c4e3d46 100644
--- a/drivers/input/misc/twl4030-vibra.c
+++ b/drivers/input/misc/twl4030-vibra.c
@@ -183,7 +183,8 @@ static bool twl4030_vibra_check_coexist(struct twl4030_vibra_data *pdata,
 	if (pdata && pdata->coexist)
 		return true;
 
-	if (of_find_node_by_name(node, "codec")) {
+	node = of_find_node_by_name(node, "codec");
+	if (node) {
 		of_node_put(node);
 		return true;
 	}
diff --git a/drivers/input/misc/twl6040-vibra.c b/drivers/input/misc/twl6040-vibra.c
index 0e0d094df..ea63fad48 100644
--- a/drivers/input/misc/twl6040-vibra.c
+++ b/drivers/input/misc/twl6040-vibra.c
@@ -308,7 +308,8 @@ static int twl6040_vibra_probe(struct platform_device *pdev)
 	mutex_init(&info->mutex);
 
 	error = devm_request_threaded_irq(&pdev->dev, info->irq, NULL,
-					  twl6040_vib_irq_handler, 0,
+					  twl6040_vib_irq_handler,
+					  IRQF_ONESHOT,
 					  "twl6040_irq_vib", info);
 	if (error) {
 		dev_err(info->dev, "VIB IRQ request failed: %d\n", error);
diff --git a/drivers/input/misc/wm831x-on.c b/drivers/input/misc/wm831x-on.c
index 59d4f7bcb..1b44de265 100644
--- a/drivers/input/misc/wm831x-on.c
+++ b/drivers/input/misc/wm831x-on.c
@@ -99,7 +99,8 @@ static int wm831x_on_probe(struct platform_device *pdev)
 	wm831x_on->dev->dev.parent = &pdev->dev;
 
 	ret = request_threaded_irq(irq, NULL, wm831x_on_irq,
-				   IRQF_TRIGGER_RISING, "wm831x_on",
+				   IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+				   "wm831x_on",
 				   wm831x_on);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "Unable to request IRQ: %d\n", ret);