Linux-libre 4.3.2-gnu

25 files changed, 383 insertions, 446 deletions

diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index d4f0a817e..906dd1b25 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -167,28 +167,16 @@ config INPUT_M68K_BEEP
 	depends on M68K
 
 config INPUT_MAX77693_HAPTIC
-	tristate "MAXIM MAX77693 haptic controller support"
-	depends on MFD_MAX77693 && PWM
+	tristate "MAXIM MAX77693/MAX77843 haptic controller support"
+	depends on (MFD_MAX77693 || MFD_MAX77843) && PWM
 	select INPUT_FF_MEMLESS
 	help
 	  This option enables support for the haptic controller on
-	  MAXIM MAX77693 chip.
+	  MAXIM MAX77693 and MAX77843 chips.
 
 	  To compile this driver as module, choose M here: the
 	  module will be called max77693-haptic.
 
-config INPUT_MAX77843_HAPTIC
-    tristate "MAXIM MAX77843 haptic controller support"
-    depends on MFD_MAX77843 && REGULATOR
-    select INPUT_FF_MEMLESS
-    help
-      This option enables support for the haptic controller on
-      MAXIM MAX77843 chip. The driver supports ff-memless interface
-      from input framework.
-
-      To compile this driver as module, choose M here: the
-      module will be called max77843-haptic.
-
 config INPUT_MAX8925_ONKEY
 	tristate "MAX8925 ONKEY support"
 	depends on MFD_MAX8925
@@ -259,7 +247,7 @@ config INPUT_APANEL
 config INPUT_GP2A
 	tristate "Sharp GP2AP002A00F I2C Proximity/Opto sensor driver"
 	depends on I2C
-	depends on GPIOLIB
+	depends on GPIOLIB || COMPILE_TEST
 	help
 	  Say Y here if you have a Sharp GP2AP002A00F proximity/als combo-chip
 	  hooked to an I2C bus.
@@ -269,7 +257,7 @@ config INPUT_GP2A
 
 config INPUT_GPIO_BEEPER
 	tristate "Generic GPIO Beeper support"
-	depends on GPIOLIB
+	depends on GPIOLIB || COMPILE_TEST
 	help
 	  Say Y here if you have a beeper connected to a GPIO pin.
 
@@ -278,7 +266,7 @@ config INPUT_GPIO_BEEPER
 
 config INPUT_GPIO_TILT_POLLED
 	tristate "Polled GPIO tilt switch"
-	depends on GPIOLIB
+	depends on GPIOLIB || COMPILE_TEST
 	select INPUT_POLLDEV
 	help
 	  This driver implements support for tilt switches connected
@@ -569,7 +557,7 @@ config INPUT_PWM_BEEPER
 
 config INPUT_GPIO_ROTARY_ENCODER
 	tristate "Rotary encoders connected to GPIO pins"
-	depends on GPIOLIB
+	depends on GPIOLIB || COMPILE_TEST
 	help
 	  Say Y here to add support for rotary encoders connected to GPIO lines.
 	  Check file:Documentation/input/rotary-encoder.txt for more
@@ -776,7 +764,8 @@ config INPUT_SOC_BUTTON_ARRAY
 
 config INPUT_DRV260X_HAPTICS
 	tristate "TI DRV260X haptics support"
-	depends on INPUT && I2C && GPIOLIB
+	depends on INPUT && I2C
+	depends on GPIOLIB || COMPILE_TEST
 	select INPUT_FF_MEMLESS
 	select REGMAP_I2C
 	help
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 53df07dcc..0357a088c 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -41,7 +41,6 @@ obj-$(CONFIG_INPUT_KEYSPAN_REMOTE)	+= keyspan_remote.o
 obj-$(CONFIG_INPUT_KXTJ9)		+= kxtj9.o
 obj-$(CONFIG_INPUT_M68K_BEEP)		+= m68kspkr.o
 obj-$(CONFIG_INPUT_MAX77693_HAPTIC)	+= max77693-haptic.o
-obj-$(CONFIG_INPUT_MAX77843_HAPTIC)	+= max77843-haptic.o
 obj-$(CONFIG_INPUT_MAX8925_ONKEY)	+= max8925_onkey.o
 obj-$(CONFIG_INPUT_MAX8997_HAPTIC)	+= max8997_haptic.o
 obj-$(CONFIG_INPUT_MC13783_PWRBUTTON)	+= mc13783-pwrbutton.o
diff --git a/drivers/input/misc/ab8500-ponkey.c b/drivers/input/misc/ab8500-ponkey.c
index 1f7e15ca5..4f5ef5bb5 100644
--- a/drivers/input/misc/ab8500-ponkey.c
+++ b/drivers/input/misc/ab8500-ponkey.c
@@ -118,6 +118,7 @@ static const struct of_device_id ab8500_ponkey_match[] = {
 	{ .compatible = "stericsson,ab8500-ponkey", },
 	{}
 };
+MODULE_DEVICE_TABLE(of, ab8500_ponkey_match);
 #endif
 
 static struct platform_driver ab8500_ponkey_driver = {
diff --git a/drivers/input/misc/adxl34x-i2c.c b/drivers/input/misc/adxl34x-i2c.c
index bdb5d03b2..a8b0a2eec 100644
--- a/drivers/input/misc/adxl34x-i2c.c
+++ b/drivers/input/misc/adxl34x-i2c.c
@@ -158,7 +158,6 @@ MODULE_DEVICE_TABLE(of, adxl34x_of_id);
 static struct i2c_driver adxl34x_driver = {
 	.driver = {
 		.name = "adxl34x",
-		.owner = THIS_MODULE,
 		.pm = &adxl34x_i2c_pm,
 		.of_match_table = of_match_ptr(adxl34x_of_id),
 	},
diff --git a/drivers/input/misc/arizona-haptics.c b/drivers/input/misc/arizona-haptics.c
index 4dbbed74c..4bf678541 100644
--- a/drivers/input/misc/arizona-haptics.c
+++ b/drivers/input/misc/arizona-haptics.c
@@ -170,8 +170,8 @@ static int arizona_haptics_probe(struct platform_device *pdev)
 
 	INIT_WORK(&haptics->work, arizona_haptics_work);
 
-	haptics->input_dev = input_allocate_device();
-	if (haptics->input_dev == NULL) {
+	haptics->input_dev = devm_input_allocate_device(&pdev->dev);
+	if (!haptics->input_dev) {
 		dev_err(arizona->dev, "Failed to allocate input device\n");
 		return -ENOMEM;
 	}
@@ -188,41 +188,23 @@ static int arizona_haptics_probe(struct platform_device *pdev)
 	if (ret < 0) {
 		dev_err(arizona->dev, "input_ff_create_memless() failed: %d\n",
 			ret);
-		goto err_ialloc;
+		return ret;
 	}
 
 	ret = input_register_device(haptics->input_dev);
 	if (ret < 0) {
 		dev_err(arizona->dev, "couldn't register input device: %d\n",
 			ret);
-		goto err_iff;
+		return ret;
 	}
 
 	platform_set_drvdata(pdev, haptics);
 
 	return 0;
-
-err_iff:
-	if (haptics->input_dev)
-		input_ff_destroy(haptics->input_dev);
-err_ialloc:
-	input_free_device(haptics->input_dev);
-
-	return ret;
-}
-
-static int arizona_haptics_remove(struct platform_device *pdev)
-{
-	struct arizona_haptics *haptics = platform_get_drvdata(pdev);
-
-	input_unregister_device(haptics->input_dev);
-
-	return 0;
 }
 
 static struct platform_driver arizona_haptics_driver = {
 	.probe		= arizona_haptics_probe,
-	.remove		= arizona_haptics_remove,
 	.driver		= {
 		.name	= "arizona-haptics",
 	},
diff --git a/drivers/input/misc/bma150.c b/drivers/input/misc/bma150.c
index b36831c82..1d0e61d7c 100644
--- a/drivers/input/misc/bma150.c
+++ b/drivers/input/misc/bma150.c
@@ -333,10 +333,9 @@ static void bma150_report_xyz(struct bma150_data *bma150)
 	y = ((0xc0 & data[2]) >> 6) | (data[3] << 2);
 	z = ((0xc0 & data[4]) >> 6) | (data[5] << 2);
 
-	/* sign extension */
-	x = (s16) (x << 6) >> 6;
-	y = (s16) (y << 6) >> 6;
-	z = (s16) (z << 6) >> 6;
+	x = sign_extend32(x, 9);
+	y = sign_extend32(y, 9);
+	z = sign_extend32(z, 9);
 
 	input_report_abs(bma150->input, ABS_X, x);
 	input_report_abs(bma150->input, ABS_Y, y);
@@ -654,7 +653,6 @@ MODULE_DEVICE_TABLE(i2c, bma150_id);
 
 static struct i2c_driver bma150_driver = {
 	.driver = {
-		.owner	= THIS_MODULE,
 		.name	= BMA150_DRIVER,
 		.pm	= &bma150_pm,
 	},
diff --git a/drivers/input/misc/cma3000_d0x_i2c.c b/drivers/input/misc/cma3000_d0x_i2c.c
index 4fdef98ce..c7021916b 100644
--- a/drivers/input/misc/cma3000_d0x_i2c.c
+++ b/drivers/input/misc/cma3000_d0x_i2c.c
@@ -118,7 +118,6 @@ static struct i2c_driver cma3000_i2c_driver = {
 	.id_table	= cma3000_i2c_id,
 	.driver = {
 		.name	= "cma3000_i2c_accl",
-		.owner	= THIS_MODULE,
 #ifdef CONFIG_PM
 		.pm	= &cma3000_i2c_pm_ops,
 #endif
diff --git a/drivers/input/misc/drv260x.c b/drivers/input/misc/drv260x.c
index e5d60ecd2..2adfd86c8 100644
--- a/drivers/input/misc/drv260x.c
+++ b/drivers/input/misc/drv260x.c
@@ -204,7 +204,7 @@ struct drv260x_data {
 	int overdrive_voltage;
 };
 
-static struct reg_default drv260x_reg_defs[] = {
+static const struct reg_default drv260x_reg_defs[] = {
 	{ DRV260X_STATUS, 0xe0 },
 	{ DRV260X_MODE, 0x40 },
 	{ DRV260X_RT_PB_IN, 0x00 },
@@ -313,14 +313,14 @@ static void drv260x_close(struct input_dev *input)
 	gpiod_set_value(haptics->enable_gpio, 0);
 }
 
-static const struct reg_default drv260x_lra_cal_regs[] = {
+static const struct reg_sequence drv260x_lra_cal_regs[] = {
 	{ DRV260X_MODE, DRV260X_AUTO_CAL },
 	{ DRV260X_CTRL3, DRV260X_NG_THRESH_2 },
 	{ DRV260X_FEEDBACK_CTRL, DRV260X_FB_REG_LRA_MODE |
 		DRV260X_BRAKE_FACTOR_4X | DRV260X_LOOP_GAIN_HIGH },
 };
 
-static const struct reg_default drv260x_lra_init_regs[] = {
+static const struct reg_sequence drv260x_lra_init_regs[] = {
 	{ DRV260X_MODE, DRV260X_RT_PLAYBACK },
 	{ DRV260X_A_TO_V_CTRL, DRV260X_AUDIO_HAPTICS_PEAK_20MS |
 		DRV260X_AUDIO_HAPTICS_FILTER_125HZ },
@@ -337,7 +337,7 @@ static const struct reg_default drv260x_lra_init_regs[] = {
 	{ DRV260X_CTRL4, DRV260X_AUTOCAL_TIME_500MS },
 };
 
-static const struct reg_default drv260x_erm_cal_regs[] = {
+static const struct reg_sequence drv260x_erm_cal_regs[] = {
 	{ DRV260X_MODE, DRV260X_AUTO_CAL },
 	{ DRV260X_A_TO_V_MIN_INPUT, DRV260X_AUDIO_HAPTICS_MIN_IN_VOLT },
 	{ DRV260X_A_TO_V_MAX_INPUT, DRV260X_AUDIO_HAPTICS_MAX_IN_VOLT },
@@ -720,7 +720,6 @@ static struct i2c_driver drv260x_driver = {
 	.probe		= drv260x_probe,
 	.driver		= {
 		.name	= "drv260x-haptics",
-		.owner	= THIS_MODULE,
 		.of_match_table = of_match_ptr(drv260x_of_match),
 		.pm	= &drv260x_pm_ops,
 	},
diff --git a/drivers/input/misc/drv2665.c b/drivers/input/misc/drv2665.c
index 0afaa33de..ef9bc12b3 100644
--- a/drivers/input/misc/drv2665.c
+++ b/drivers/input/misc/drv2665.c
@@ -74,7 +74,7 @@ static const u8 drv2665_sine_wave_form[] = {
 	0x9b, 0x9f, 0xa5, 0xad, 0xb8, 0xc4, 0xd2, 0xe0, 0xf0, 0x00,
 };
 
-static struct reg_default drv2665_reg_defs[] = {
+static const struct reg_default drv2665_reg_defs[] = {
 	{ DRV2665_STATUS, 0x02 },
 	{ DRV2665_CTRL_1, 0x28 },
 	{ DRV2665_CTRL_2, 0x40 },
@@ -132,7 +132,7 @@ static void drv2665_close(struct input_dev *input)
 			"Failed to enter standby mode: %d\n", error);
 }
 
-static const struct reg_default drv2665_init_regs[] = {
+static const struct reg_sequence drv2665_init_regs[] = {
 	{ DRV2665_CTRL_2, 0 | DRV2665_10_MS_IDLE_TOUT },
 	{ DRV2665_CTRL_1, DRV2665_25_VPP_GAIN },
 };
@@ -309,7 +309,6 @@ static struct i2c_driver drv2665_driver = {
 	.probe		= drv2665_probe,
 	.driver		= {
 		.name	= "drv2665-haptics",
-		.owner	= THIS_MODULE,
 		.of_match_table = of_match_ptr(drv2665_of_match),
 		.pm	= &drv2665_pm_ops,
 	},
diff --git a/drivers/input/misc/drv2667.c b/drivers/input/misc/drv2667.c
index fc0fddf08..d5ba74813 100644
--- a/drivers/input/misc/drv2667.c
+++ b/drivers/input/misc/drv2667.c
@@ -116,7 +116,7 @@ struct drv2667_data {
 	u32 frequency;
 };
 
-static struct reg_default drv2667_reg_defs[] = {
+static const struct reg_default drv2667_reg_defs[] = {
 	{ DRV2667_STATUS, 0x02 },
 	{ DRV2667_CTRL_1, 0x28 },
 	{ DRV2667_CTRL_2, 0x40 },
@@ -262,14 +262,14 @@ static void drv2667_close(struct input_dev *input)
 			"Failed to enter standby mode: %d\n", error);
 }
 
-static const struct reg_default drv2667_init_regs[] = {
+static const struct reg_sequence drv2667_init_regs[] = {
 	{ DRV2667_CTRL_2, 0 },
 	{ DRV2667_CTRL_1, DRV2667_25_VPP_GAIN },
 	{ DRV2667_WV_SEQ_0, 1 },
 	{ DRV2667_WV_SEQ_1, 0 }
 };
 
-static const struct reg_default drv2667_page1_init[] = {
+static const struct reg_sequence drv2667_page1_init[] = {
 	{ DRV2667_RAM_HDR_SZ, 0x05 },
 	{ DRV2667_RAM_START_HI, 0x80 },
 	{ DRV2667_RAM_START_LO, 0x06 },
@@ -484,7 +484,6 @@ static struct i2c_driver drv2667_driver = {
 	.probe		= drv2667_probe,
 	.driver		= {
 		.name	= "drv2667-haptics",
-		.owner	= THIS_MODULE,
 		.of_match_table = of_match_ptr(drv2667_of_match),
 		.pm	= &drv2667_pm_ops,
 	},
diff --git a/drivers/input/misc/gp2ap002a00f.c b/drivers/input/misc/gp2ap002a00f.c
index 0ac176d66..3bfdfcc20 100644
--- a/drivers/input/misc/gp2ap002a00f.c
+++ b/drivers/input/misc/gp2ap002a00f.c
@@ -267,11 +267,11 @@ static const struct i2c_device_id gp2a_i2c_id[] = {
 	{ GP2A_I2C_NAME, 0 },
 	{ }
 };
+MODULE_DEVICE_TABLE(i2c, gp2a_i2c_id);
 
 static struct i2c_driver gp2a_i2c_driver = {
 	.driver = {
 		.name	= GP2A_I2C_NAME,
-		.owner	= THIS_MODULE,
 		.pm	= &gp2a_pm,
 	},
 	.probe		= gp2a_probe,
diff --git a/drivers/input/misc/kxtj9.c b/drivers/input/misc/kxtj9.c
index 6e29349da..e058d7112 100644
--- a/drivers/input/misc/kxtj9.c
+++ b/drivers/input/misc/kxtj9.c
@@ -658,7 +658,6 @@ MODULE_DEVICE_TABLE(i2c, kxtj9_id);
 static struct i2c_driver kxtj9_driver = {
 	.driver = {
 		.name	= NAME,
-		.owner	= THIS_MODULE,
 		.pm	= &kxtj9_pm_ops,
 	},
 	.probe		= kxtj9_probe,
diff --git a/drivers/input/misc/max77693-haptic.c b/drivers/input/misc/max77693-haptic.c
index 39e930c10..6d96bff32 100644
--- a/drivers/input/misc/max77693-haptic.c
+++ b/drivers/input/misc/max77693-haptic.c
@@ -1,8 +1,9 @@
 /*
- * MAXIM MAX77693 Haptic device driver
+ * MAXIM MAX77693/MAX77843 Haptic device driver
  *
- * Copyright (C) 2014 Samsung Electronics
+ * Copyright (C) 2014,2015 Samsung Electronics
  * Jaewon Kim <jaewon02.kim@samsung.com>
+ * Krzysztof Kozlowski <k.kozlowski@samsung.com>
  *
  * This program is not provided / owned by Maxim Integrated Products.
  *
@@ -24,7 +25,9 @@
 #include <linux/workqueue.h>
 #include <linux/regulator/consumer.h>
 #include <linux/mfd/max77693.h>
+#include <linux/mfd/max77693-common.h>
 #include <linux/mfd/max77693-private.h>
+#include <linux/mfd/max77843-private.h>
 
 #define MAX_MAGNITUDE_SHIFT	16
 
@@ -46,6 +49,8 @@ enum max77693_haptic_pwm_divisor {
 };
 
 struct max77693_haptic {
+	enum max77693_types dev_type;
+
 	struct regmap *regmap_pmic;
 	struct regmap *regmap_haptic;
 	struct device *dev;
@@ -59,7 +64,6 @@ struct max77693_haptic {
 	unsigned int pwm_duty;
 	enum max77693_haptic_motor_type type;
 	enum max77693_haptic_pulse_mode mode;
-	enum max77693_haptic_pwm_divisor pwm_divisor;
 
 	struct work_struct work;
 };
@@ -78,19 +82,52 @@ static int max77693_haptic_set_duty_cycle(struct max77693_haptic *haptic)
 	return 0;
 }
 
+static int max77843_haptic_bias(struct max77693_haptic *haptic, bool on)
+{
+	int error;
+
+	if (haptic->dev_type != TYPE_MAX77843)
+		return 0;
+
+	error = regmap_update_bits(haptic->regmap_haptic,
+				   MAX77843_SYS_REG_MAINCTRL1,
+				   MAX77843_MAINCTRL1_BIASEN_MASK,
+				   on << MAINCTRL1_BIASEN_SHIFT);
+	if (error) {
+		dev_err(haptic->dev, "failed to %s bias: %d\n",
+			on ? "enable" : "disable", error);
+		return error;
+	}
+
+	return 0;
+}
+
 static int max77693_haptic_configure(struct max77693_haptic *haptic,
 				     bool enable)
 {
-	unsigned int value;
+	unsigned int value, config_reg;
 	int error;
 
-	value = ((haptic->type << MAX77693_CONFIG2_MODE) |
-		(enable << MAX77693_CONFIG2_MEN) |
-		(haptic->mode << MAX77693_CONFIG2_HTYP) |
-		(haptic->pwm_divisor));
+	switch (haptic->dev_type) {
+	case TYPE_MAX77693:
+		value = ((haptic->type << MAX77693_CONFIG2_MODE) |
+			(enable << MAX77693_CONFIG2_MEN) |
+			(haptic->mode << MAX77693_CONFIG2_HTYP) |
+			MAX77693_HAPTIC_PWM_DIVISOR_128);
+		config_reg = MAX77693_HAPTIC_REG_CONFIG2;
+		break;
+	case TYPE_MAX77843:
+		value = (haptic->type << MCONFIG_MODE_SHIFT) |
+			(enable << MCONFIG_MEN_SHIFT) |
+			MAX77693_HAPTIC_PWM_DIVISOR_128;
+		config_reg = MAX77843_HAP_REG_MCONFIG;
+		break;
+	default:
+		return -EINVAL;
+	}
 
 	error = regmap_write(haptic->regmap_haptic,
-			     MAX77693_HAPTIC_REG_CONFIG2, value);
+			     config_reg, value);
 	if (error) {
 		dev_err(haptic->dev,
 			"failed to update haptic config: %d\n", error);
@@ -104,6 +141,9 @@ static int max77693_haptic_lowsys(struct max77693_haptic *haptic, bool enable)
 {
 	int error;
 
+	if (haptic->dev_type != TYPE_MAX77693)
+		return 0;
+
 	error = regmap_update_bits(haptic->regmap_pmic,
 				   MAX77693_PMIC_REG_LSCNFG,
 				   MAX77693_PMIC_LOW_SYS_MASK,
@@ -219,6 +259,10 @@ static int max77693_haptic_open(struct input_dev *dev)
 	struct max77693_haptic *haptic = input_get_drvdata(dev);
 	int error;
 
+	error = max77843_haptic_bias(haptic, true);
+	if (error)
+		return error;
+
 	error = regulator_enable(haptic->motor_reg);
 	if (error) {
 		dev_err(haptic->dev,
@@ -241,6 +285,8 @@ static void max77693_haptic_close(struct input_dev *dev)
 	if (error)
 		dev_err(haptic->dev,
 			"failed to disable regulator: %d\n", error);
+
+	max77843_haptic_bias(haptic, false);
 }
 
 static int max77693_haptic_probe(struct platform_device *pdev)
@@ -254,13 +300,26 @@ static int max77693_haptic_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	haptic->regmap_pmic = max77693->regmap;
-	haptic->regmap_haptic = max77693->regmap_haptic;
 	haptic->dev = &pdev->dev;
 	haptic->type = MAX77693_HAPTIC_LRA;
 	haptic->mode = MAX77693_HAPTIC_EXTERNAL_MODE;
-	haptic->pwm_divisor = MAX77693_HAPTIC_PWM_DIVISOR_128;
 	haptic->suspend_state = false;
 
+	/* Variant-specific init */
+	haptic->dev_type = platform_get_device_id(pdev)->driver_data;
+	switch (haptic->dev_type) {
+	case TYPE_MAX77693:
+		haptic->regmap_haptic = max77693->regmap_haptic;
+		break;
+	case TYPE_MAX77843:
+		haptic->regmap_haptic = max77693->regmap;
+		break;
+	default:
+		dev_err(&pdev->dev, "unsupported device type: %u\n",
+			haptic->dev_type);
+		return -EINVAL;
+	}
+
 	INIT_WORK(&haptic->work, max77693_haptic_play_work);
 
 	/* Get pwm and regulatot for haptic device */
@@ -338,16 +397,25 @@ static int __maybe_unused max77693_haptic_resume(struct device *dev)
 static SIMPLE_DEV_PM_OPS(max77693_haptic_pm_ops,
 			 max77693_haptic_suspend, max77693_haptic_resume);
 
+static const struct platform_device_id max77693_haptic_id[] = {
+	{ "max77693-haptic", TYPE_MAX77693 },
+	{ "max77843-haptic", TYPE_MAX77843 },
+	{},
+};
+MODULE_DEVICE_TABLE(platform, max77693_haptic_id);
+
 static struct platform_driver max77693_haptic_driver = {
 	.driver		= {
 		.name	= "max77693-haptic",
 		.pm	= &max77693_haptic_pm_ops,
 	},
 	.probe		= max77693_haptic_probe,
+	.id_table	= max77693_haptic_id,
 };
 module_platform_driver(max77693_haptic_driver);
 
 MODULE_AUTHOR("Jaewon Kim <jaewon02.kim@samsung.com>");
-MODULE_DESCRIPTION("MAXIM MAX77693 Haptic driver");
+MODULE_AUTHOR("Krzysztof Kozlowski <k.kozlowski@samsung.com>");
+MODULE_DESCRIPTION("MAXIM 77693/77843 Haptic driver");
 MODULE_ALIAS("platform:max77693-haptic");
 MODULE_LICENSE("GPL");
diff --git a/drivers/input/misc/max77843-haptic.c b/drivers/input/misc/max77843-haptic.c
deleted file mode 100644
index dccbb465a..000000000
--- a/drivers/input/misc/max77843-haptic.c
+++ /dev/null
@@ -1,358 +0,0 @@
-/*
- * MAXIM MAX77693 Haptic device driver
- *
- * Copyright (C) 2015 Samsung Electronics
- * Author: Jaewon Kim <jaewon02.kim@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/err.h>
-#include <linux/i2c.h>
-#include <linux/init.h>
-#include <linux/input.h>
-#include <linux/mfd/max77843-private.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/pwm.h>
-#include <linux/regmap.h>
-#include <linux/regulator/consumer.h>
-#include <linux/slab.h>
-#include <linux/workqueue.h>
-
-#define MAX_MAGNITUDE_SHIFT        16
-
-enum max77843_haptic_motor_type {
-	MAX77843_HAPTIC_ERM = 0,
-	MAX77843_HAPTIC_LRA,
-};
-
-enum max77843_haptic_pwm_divisor {
-	MAX77843_HAPTIC_PWM_DIVISOR_32 = 0,
-	MAX77843_HAPTIC_PWM_DIVISOR_64,
-	MAX77843_HAPTIC_PWM_DIVISOR_128,
-	MAX77843_HAPTIC_PWM_DIVISOR_256,
-};
-
-struct max77843_haptic {
-	struct regmap *regmap_haptic;
-	struct device *dev;
-	struct input_dev *input_dev;
-	struct pwm_device *pwm_dev;
-	struct regulator *motor_reg;
-	struct work_struct work;
-	struct mutex mutex;
-
-	unsigned int magnitude;
-	unsigned int pwm_duty;
-
-	bool active;
-	bool suspended;
-
-	enum max77843_haptic_motor_type type;
-	enum max77843_haptic_pwm_divisor pwm_divisor;
-};
-
-static int max77843_haptic_set_duty_cycle(struct max77843_haptic *haptic)
-{
-	int delta = (haptic->pwm_dev->period + haptic->pwm_duty) / 2;
-	int error;
-
-	error = pwm_config(haptic->pwm_dev, delta, haptic->pwm_dev->period);
-	if (error) {
-		dev_err(haptic->dev, "failed to configure pwm: %d\n", error);
-		return error;
-	}
-
-	return 0;
-}
-
-static int max77843_haptic_bias(struct max77843_haptic *haptic, bool on)
-{
-	int error;
-
-	error = regmap_update_bits(haptic->regmap_haptic,
-				   MAX77843_SYS_REG_MAINCTRL1,
-				   MAX77843_MAINCTRL1_BIASEN_MASK,
-				   on << MAINCTRL1_BIASEN_SHIFT);
-	if (error) {
-		dev_err(haptic->dev, "failed to %s bias: %d\n",
-			on ? "enable" : "disable", error);
-		return error;
-	}
-
-	return 0;
-}
-
-static int max77843_haptic_config(struct max77843_haptic *haptic, bool enable)
-{
-	unsigned int value;
-	int error;
-
-	value = (haptic->type << MCONFIG_MODE_SHIFT) |
-		(enable << MCONFIG_MEN_SHIFT) |
-		(haptic->pwm_divisor << MCONFIG_PDIV_SHIFT);
-
-	error = regmap_write(haptic->regmap_haptic,
-			     MAX77843_HAP_REG_MCONFIG, value);
-	if (error) {
-		dev_err(haptic->dev,
-			"failed to update haptic config: %d\n", error);
-		return error;
-	}
-
-	return 0;
-}
-
-static int max77843_haptic_enable(struct max77843_haptic *haptic)
-{
-	int error;
-
-	if (haptic->active)
-		return 0;
-
-	error = pwm_enable(haptic->pwm_dev);
-	if (error) {
-		dev_err(haptic->dev,
-			"failed to enable pwm device: %d\n", error);
-		return error;
-	}
-
-	error = max77843_haptic_config(haptic, true);
-	if (error)
-		goto err_config;
-
-	haptic->active = true;
-
-	return 0;
-
-err_config:
-	pwm_disable(haptic->pwm_dev);
-
-	return error;
-}
-
-static int max77843_haptic_disable(struct max77843_haptic *haptic)
-{
-	int error;
-
-	if (!haptic->active)
-		return 0;
-
-	error = max77843_haptic_config(haptic, false);
-	if (error)
-		return error;
-
-	pwm_disable(haptic->pwm_dev);
-
-	haptic->active = false;
-
-	return 0;
-}
-
-static void max77843_haptic_play_work(struct work_struct *work)
-{
-	struct max77843_haptic *haptic =
-			container_of(work, struct max77843_haptic, work);
-	int error;
-
-	mutex_lock(&haptic->mutex);
-
-	if (haptic->suspended)
-		goto out_unlock;
-
-	if (haptic->magnitude) {
-		error = max77843_haptic_set_duty_cycle(haptic);
-		if (error) {
-			dev_err(haptic->dev,
-				"failed to set duty cycle: %d\n", error);
-			goto out_unlock;
-		}
-
-		error = max77843_haptic_enable(haptic);
-		if (error)
-			dev_err(haptic->dev,
-				"cannot enable haptic: %d\n", error);
-	} else {
-		error = max77843_haptic_disable(haptic);
-		if (error)
-			dev_err(haptic->dev,
-				"cannot disable haptic: %d\n", error);
-	}
-
-out_unlock:
-	mutex_unlock(&haptic->mutex);
-}
-
-static int max77843_haptic_play_effect(struct input_dev *dev, void *data,
-		struct ff_effect *effect)
-{
-	struct max77843_haptic *haptic = input_get_drvdata(dev);
-	u64 period_mag_multi;
-
-	haptic->magnitude = effect->u.rumble.strong_magnitude;
-	if (!haptic->magnitude)
-		haptic->magnitude = effect->u.rumble.weak_magnitude;
-
-	period_mag_multi = (u64)haptic->pwm_dev->period * haptic->magnitude;
-	haptic->pwm_duty = (unsigned int)(period_mag_multi >>
-						MAX_MAGNITUDE_SHIFT);
-
-	schedule_work(&haptic->work);
-
-	return 0;
-}
-
-static int max77843_haptic_open(struct input_dev *dev)
-{
-	struct max77843_haptic *haptic = input_get_drvdata(dev);
-	int error;
-
-	error = max77843_haptic_bias(haptic, true);
-	if (error)
-		return error;
-
-	error = regulator_enable(haptic->motor_reg);
-	if (error) {
-		dev_err(haptic->dev,
-			"failed to enable regulator: %d\n", error);
-		return error;
-	}
-
-	return 0;
-}
-
-static void max77843_haptic_close(struct input_dev *dev)
-{
-	struct max77843_haptic *haptic = input_get_drvdata(dev);
-	int error;
-
-	cancel_work_sync(&haptic->work);
-	max77843_haptic_disable(haptic);
-
-	error = regulator_disable(haptic->motor_reg);
-	if (error)
-		dev_err(haptic->dev,
-			"failed to disable regulator: %d\n", error);
-
-	max77843_haptic_bias(haptic, false);
-}
-
-static int max77843_haptic_probe(struct platform_device *pdev)
-{
-	struct max77843 *max77843 = dev_get_drvdata(pdev->dev.parent);
-	struct max77843_haptic *haptic;
-	int error;
-
-	haptic = devm_kzalloc(&pdev->dev, sizeof(*haptic), GFP_KERNEL);
-	if (!haptic)
-		return -ENOMEM;
-
-	haptic->regmap_haptic = max77843->regmap;
-	haptic->dev = &pdev->dev;
-	haptic->type = MAX77843_HAPTIC_LRA;
-	haptic->pwm_divisor = MAX77843_HAPTIC_PWM_DIVISOR_128;
-
-	INIT_WORK(&haptic->work, max77843_haptic_play_work);
-	mutex_init(&haptic->mutex);
-
-	haptic->pwm_dev = devm_pwm_get(&pdev->dev, NULL);
-	if (IS_ERR(haptic->pwm_dev)) {
-		dev_err(&pdev->dev, "failed to get pwm device\n");
-		return PTR_ERR(haptic->pwm_dev);
-	}
-
-	haptic->motor_reg = devm_regulator_get_exclusive(&pdev->dev, "haptic");
-	if (IS_ERR(haptic->motor_reg)) {
-		dev_err(&pdev->dev, "failed to get regulator\n");
-		return PTR_ERR(haptic->motor_reg);
-	}
-
-	haptic->input_dev = devm_input_allocate_device(&pdev->dev);
-	if (!haptic->input_dev) {
-		dev_err(&pdev->dev, "failed to allocate input device\n");
-		return -ENOMEM;
-	}
-
-	haptic->input_dev->name = "max77843-haptic";
-	haptic->input_dev->id.version = 1;
-	haptic->input_dev->dev.parent = &pdev->dev;
-	haptic->input_dev->open = max77843_haptic_open;
-	haptic->input_dev->close = max77843_haptic_close;
-	input_set_drvdata(haptic->input_dev, haptic);
-	input_set_capability(haptic->input_dev, EV_FF, FF_RUMBLE);
-
-	error = input_ff_create_memless(haptic->input_dev, NULL,
-			max77843_haptic_play_effect);
-	if (error) {
-		dev_err(&pdev->dev, "failed to create force-feedback\n");
-		return error;
-	}
-
-	error = input_register_device(haptic->input_dev);
-	if (error) {
-		dev_err(&pdev->dev, "failed to register input device\n");
-		return error;
-	}
-
-	platform_set_drvdata(pdev, haptic);
-
-	return 0;
-}
-
-static int __maybe_unused max77843_haptic_suspend(struct device *dev)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	struct max77843_haptic *haptic = platform_get_drvdata(pdev);
-	int error;
-
-	error = mutex_lock_interruptible(&haptic->mutex);
-	if (error)
-		return error;
-
-	max77843_haptic_disable(haptic);
-
-	haptic->suspended = true;
-
-	mutex_unlock(&haptic->mutex);
-
-	return 0;
-}
-
-static int __maybe_unused max77843_haptic_resume(struct device *dev)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	struct max77843_haptic *haptic = platform_get_drvdata(pdev);
-	unsigned int magnitude;
-
-	mutex_lock(&haptic->mutex);
-
-	haptic->suspended = false;
-
-	magnitude = ACCESS_ONCE(haptic->magnitude);
-	if (magnitude)
-		max77843_haptic_enable(haptic);
-
-	mutex_unlock(&haptic->mutex);
-
-	return 0;
-}
-
-static SIMPLE_DEV_PM_OPS(max77843_haptic_pm_ops,
-		max77843_haptic_suspend, max77843_haptic_resume);
-
-static struct platform_driver max77843_haptic_driver = {
-	.driver		= {
-		.name	= "max77843-haptic",
-		.pm	= &max77843_haptic_pm_ops,
-	},
-	.probe		= max77843_haptic_probe,
-};
-module_platform_driver(max77843_haptic_driver);
-
-MODULE_AUTHOR("Jaewon Kim <jaewon02.kim@samsung.com>");
-MODULE_DESCRIPTION("MAXIM MAX77843 Haptic driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/input/misc/max8997_haptic.c b/drivers/input/misc/max8997_haptic.c
index d0f687281..a806ba381 100644
--- a/drivers/input/misc/max8997_haptic.c
+++ b/drivers/input/misc/max8997_haptic.c
@@ -394,7 +394,7 @@ static const struct platform_device_id max8997_haptic_id[] = {
 	{ "max8997-haptic", 0 },
 	{ },
 };
-MODULE_DEVICE_TABLE(i2c, max8997_haptic_id);
+MODULE_DEVICE_TABLE(platform, max8997_haptic_id);
 
 static struct platform_driver max8997_haptic_driver = {
 	.driver	= {
@@ -407,7 +407,6 @@ static struct platform_driver max8997_haptic_driver = {
 };
 module_platform_driver(max8997_haptic_driver);
 
-MODULE_ALIAS("platform:max8997-haptic");
 MODULE_AUTHOR("Donggeun Kim <dg77.kim@samsung.com>");
 MODULE_DESCRIPTION("max8997_haptic driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/input/misc/mpu3050.c b/drivers/input/misc/mpu3050.c
index 5e5051351..f088db31c 100644
--- a/drivers/input/misc/mpu3050.c
+++ b/drivers/input/misc/mpu3050.c
@@ -466,7 +466,6 @@ MODULE_DEVICE_TABLE(of, mpu3050_of_match);
 static struct i2c_driver mpu3050_i2c_driver = {
 	.driver	= {
 		.name	= "mpu3050",
-		.owner	= THIS_MODULE,
 		.pm	= &mpu3050_pm,
 		.of_match_table = mpu3050_of_match,
 	},
diff --git a/drivers/input/misc/pcf8574_keypad.c b/drivers/input/misc/pcf8574_keypad.c
index 97f711a7b..4abdf1efb 100644
--- a/drivers/input/misc/pcf8574_keypad.c
+++ b/drivers/input/misc/pcf8574_keypad.c
@@ -208,7 +208,6 @@ MODULE_DEVICE_TABLE(i2c, pcf8574_kp_id);
 static struct i2c_driver pcf8574_kp_driver = {
 	.driver = {
 		.name  = DRV_NAME,
-		.owner = THIS_MODULE,
 #ifdef CONFIG_PM
 		.pm = &pcf8574_kp_pm_ops,
 #endif
diff --git a/drivers/input/misc/pm8941-pwrkey.c b/drivers/input/misc/pm8941-pwrkey.c
index 867db8a91..e317b7535 100644
--- a/drivers/input/misc/pm8941-pwrkey.c
+++ b/drivers/input/misc/pm8941-pwrkey.c
@@ -93,7 +93,7 @@ static int pm8941_reboot_notify(struct notifier_block *nb,
 	default:
 		reset_type = PON_PS_HOLD_TYPE_HARD_RESET;
 		break;
-	};
+	}
 
 	error = regmap_update_bits(pwrkey->regmap,
 				   pwrkey->baseaddr + PON_PS_HOLD_RST_CTL,
diff --git a/drivers/input/misc/pmic8xxx-pwrkey.c b/drivers/input/misc/pmic8xxx-pwrkey.c
index c4ca20e63..3f02e0e03 100644
--- a/drivers/input/misc/pmic8xxx-pwrkey.c
+++ b/drivers/input/misc/pmic8xxx-pwrkey.c
@@ -20,17 +20,72 @@
 #include <linux/regmap.h>
 #include <linux/log2.h>
 #include <linux/of.h>
+#include <linux/of_device.h>
 
 #define PON_CNTL_1 0x1C
 #define PON_CNTL_PULL_UP BIT(7)
 #define PON_CNTL_TRIG_DELAY_MASK (0x7)
+#define PON_CNTL_1_PULL_UP_EN			0xe0
+#define PON_CNTL_1_USB_PWR_EN			0x10
+#define PON_CNTL_1_WD_EN_RESET			0x08
+
+#define PM8058_SLEEP_CTRL			0x02b
+#define PM8921_SLEEP_CTRL			0x10a
+
+#define SLEEP_CTRL_SMPL_EN_RESET		0x04
+
+/* Regulator master enable addresses */
+#define REG_PM8058_VREG_EN_MSM			0x018
+#define REG_PM8058_VREG_EN_GRP_5_4		0x1c8
+
+/* Regulator control registers for shutdown/reset */
+#define PM8058_S0_CTRL				0x004
+#define PM8058_S1_CTRL				0x005
+#define PM8058_S3_CTRL				0x111
+#define PM8058_L21_CTRL				0x120
+#define PM8058_L22_CTRL				0x121
+
+#define PM8058_REGULATOR_ENABLE_MASK		0x80
+#define PM8058_REGULATOR_ENABLE			0x80
+#define PM8058_REGULATOR_DISABLE		0x00
+#define PM8058_REGULATOR_PULL_DOWN_MASK		0x40
+#define PM8058_REGULATOR_PULL_DOWN_EN		0x40
+
+/* Buck CTRL register */
+#define PM8058_SMPS_LEGACY_VREF_SEL		0x20
+#define PM8058_SMPS_LEGACY_VPROG_MASK		0x1f
+#define PM8058_SMPS_ADVANCED_BAND_MASK		0xC0
+#define PM8058_SMPS_ADVANCED_BAND_SHIFT		6
+#define PM8058_SMPS_ADVANCED_VPROG_MASK		0x3f
+
+/* Buck TEST2 registers for shutdown/reset */
+#define PM8058_S0_TEST2				0x084
+#define PM8058_S1_TEST2				0x085
+#define PM8058_S3_TEST2				0x11a
+
+#define PM8058_REGULATOR_BANK_WRITE		0x80
+#define PM8058_REGULATOR_BANK_MASK		0x70
+#define PM8058_REGULATOR_BANK_SHIFT		4
+#define PM8058_REGULATOR_BANK_SEL(n)	((n) << PM8058_REGULATOR_BANK_SHIFT)
+
+/* Buck TEST2 register bank 1 */
+#define PM8058_SMPS_LEGACY_VLOW_SEL		0x01
+
+/* Buck TEST2 register bank 7 */
+#define PM8058_SMPS_ADVANCED_MODE_MASK		0x02
+#define PM8058_SMPS_ADVANCED_MODE		0x02
+#define PM8058_SMPS_LEGACY_MODE			0x00
 
 /**
  * struct pmic8xxx_pwrkey - pmic8xxx pwrkey information
  * @key_press_irq: key press irq number
+ * @regmap: device regmap
+ * @shutdown_fn: shutdown configuration function
  */
 struct pmic8xxx_pwrkey {
 	int key_press_irq;
+	struct regmap *regmap;
+	int (*shutdown_fn)(struct pmic8xxx_pwrkey *, bool);
 };
 
 static irqreturn_t pwrkey_press_irq(int irq, void *_pwr)
@@ -76,6 +131,212 @@ static int __maybe_unused pmic8xxx_pwrkey_resume(struct device *dev)
 static SIMPLE_DEV_PM_OPS(pm8xxx_pwr_key_pm_ops,
 		pmic8xxx_pwrkey_suspend, pmic8xxx_pwrkey_resume);
 
+static void pmic8xxx_pwrkey_shutdown(struct platform_device *pdev)
+{
+	struct pmic8xxx_pwrkey *pwrkey = platform_get_drvdata(pdev);
+	int error;
+	u8 mask, val;
+	bool reset = system_state == SYSTEM_RESTART;
+
+	if (pwrkey->shutdown_fn) {
+		error = pwrkey->shutdown_fn(pwrkey, reset);
+		if (error)
+			return;
+	}
+
+	/*
+	 * Select action to perform (reset or shutdown) when PS_HOLD goes low.
+	 * Also ensure that KPD, CBL0, and CBL1 pull ups are enabled and that
+	 * USB charging is enabled.
+	 */
+	mask = PON_CNTL_1_PULL_UP_EN | PON_CNTL_1_USB_PWR_EN;
+	mask |= PON_CNTL_1_WD_EN_RESET;
+	val = mask;
+	if (!reset)
+		val &= ~PON_CNTL_1_WD_EN_RESET;
+
+	regmap_update_bits(pwrkey->regmap, PON_CNTL_1, mask, val);
+}
+
+/*
+ * Set an SMPS regulator to be disabled in its CTRL register, but enabled
+ * in the master enable register.  Also set it's pull down enable bit.
+ * Take care to make sure that the output voltage doesn't change if switching
+ * from advanced mode to legacy mode.
+ */
+static int pm8058_disable_smps_locally_set_pull_down(struct regmap *regmap,
+	u16 ctrl_addr, u16 test2_addr, u16 master_enable_addr,
+	u8 master_enable_bit)
+{
+	int error;
+	u8 vref_sel, vlow_sel, band, vprog, bank;
+	unsigned int reg;
+
+	bank = PM8058_REGULATOR_BANK_SEL(7);
+	error = regmap_write(regmap, test2_addr, bank);
+	if (error)
+		return error;
+
+	error = regmap_read(regmap, test2_addr, &reg);
+	if (error)
+		return error;
+
+	reg &= PM8058_SMPS_ADVANCED_MODE_MASK;
+	/* Check if in advanced mode. */
+	if (reg == PM8058_SMPS_ADVANCED_MODE) {
+		/* Determine current output voltage. */
+		error = regmap_read(regmap, ctrl_addr, &reg);
+		if (error)
+			return error;
+
+		band = reg & PM8058_SMPS_ADVANCED_BAND_MASK;
+		band >>= PM8058_SMPS_ADVANCED_BAND_SHIFT;
+		switch (band) {
+		case 3:
+			vref_sel = 0;
+			vlow_sel = 0;
+			break;
+		case 2:
+			vref_sel = PM8058_SMPS_LEGACY_VREF_SEL;
+			vlow_sel = 0;
+			break;
+		case 1:
+			vref_sel = PM8058_SMPS_LEGACY_VREF_SEL;
+			vlow_sel = PM8058_SMPS_LEGACY_VLOW_SEL;
+			break;
+		default:
+			pr_err("%s: regulator already disabled\n", __func__);
+			return -EPERM;
+		}
+		vprog = reg & PM8058_SMPS_ADVANCED_VPROG_MASK;
+		/* Round up if fine step is in use. */
+		vprog = (vprog + 1) >> 1;
+		if (vprog > PM8058_SMPS_LEGACY_VPROG_MASK)
+			vprog = PM8058_SMPS_LEGACY_VPROG_MASK;
+
+		/* Set VLOW_SEL bit. */
+		bank = PM8058_REGULATOR_BANK_SEL(1);
+		error = regmap_write(regmap, test2_addr, bank);
+		if (error)
+			return error;
+
+		error = regmap_update_bits(regmap, test2_addr,
+			PM8058_REGULATOR_BANK_WRITE | PM8058_REGULATOR_BANK_MASK
+				| PM8058_SMPS_LEGACY_VLOW_SEL,
+			PM8058_REGULATOR_BANK_WRITE |
+			PM8058_REGULATOR_BANK_SEL(1) | vlow_sel);
+		if (error)
+			return error;
+
+		/* Switch to legacy mode */
+		bank = PM8058_REGULATOR_BANK_SEL(7);
+		error = regmap_write(regmap, test2_addr, bank);
+		if (error)
+			return error;
+
+		error = regmap_update_bits(regmap, test2_addr,
+				PM8058_REGULATOR_BANK_WRITE |
+				PM8058_REGULATOR_BANK_MASK |
+				PM8058_SMPS_ADVANCED_MODE_MASK,
+				PM8058_REGULATOR_BANK_WRITE |
+				PM8058_REGULATOR_BANK_SEL(7) |
+				PM8058_SMPS_LEGACY_MODE);
+		if (error)
+			return error;
+
+		/* Enable locally, enable pull down, keep voltage the same. */
+		error = regmap_update_bits(regmap, ctrl_addr,
+			PM8058_REGULATOR_ENABLE_MASK |
+			PM8058_REGULATOR_PULL_DOWN_MASK |
+			PM8058_SMPS_LEGACY_VREF_SEL |
+			PM8058_SMPS_LEGACY_VPROG_MASK,
+			PM8058_REGULATOR_ENABLE | PM8058_REGULATOR_PULL_DOWN_EN
+				| vref_sel | vprog);
+		if (error)
+			return error;
+	}
+
+	/* Enable in master control register. */
+	error = regmap_update_bits(regmap, master_enable_addr,
+			master_enable_bit, master_enable_bit);
+	if (error)
+		return error;
+
+	/* Disable locally and enable pull down. */
+	return regmap_update_bits(regmap, ctrl_addr,
+		PM8058_REGULATOR_ENABLE_MASK | PM8058_REGULATOR_PULL_DOWN_MASK,
+		PM8058_REGULATOR_DISABLE | PM8058_REGULATOR_PULL_DOWN_EN);
+}
+
+static int pm8058_disable_ldo_locally_set_pull_down(struct regmap *regmap,
+		u16 ctrl_addr, u16 master_enable_addr, u8 master_enable_bit)
+{
+	int error;
+
+	/* Enable LDO in master control register. */
+	error = regmap_update_bits(regmap, master_enable_addr,
+			master_enable_bit, master_enable_bit);
+	if (error)
+		return error;
+
+	/* Disable LDO in CTRL register and set pull down */
+	return regmap_update_bits(regmap, ctrl_addr,
+		PM8058_REGULATOR_ENABLE_MASK | PM8058_REGULATOR_PULL_DOWN_MASK,
+		PM8058_REGULATOR_DISABLE | PM8058_REGULATOR_PULL_DOWN_EN);
+}
+
+static int pm8058_pwrkey_shutdown(struct pmic8xxx_pwrkey *pwrkey, bool reset)
+{
+	int error;
+	struct regmap *regmap = pwrkey->regmap;
+	u8 mask, val;
+
+	/* When shutting down, enable active pulldowns on important rails. */
+	if (!reset) {
+		/* Disable SMPS's 0,1,3 locally and set pulldown enable bits. */
+		pm8058_disable_smps_locally_set_pull_down(regmap,
+			PM8058_S0_CTRL, PM8058_S0_TEST2,
+			REG_PM8058_VREG_EN_MSM, BIT(7));
+		pm8058_disable_smps_locally_set_pull_down(regmap,
+			PM8058_S1_CTRL, PM8058_S1_TEST2,
+			REG_PM8058_VREG_EN_MSM, BIT(6));
+		pm8058_disable_smps_locally_set_pull_down(regmap,
+			PM8058_S3_CTRL, PM8058_S3_TEST2,
+			REG_PM8058_VREG_EN_GRP_5_4, BIT(7) | BIT(4));
+		/* Disable LDO 21 locally and set pulldown enable bit. */
+		pm8058_disable_ldo_locally_set_pull_down(regmap,
+			PM8058_L21_CTRL, REG_PM8058_VREG_EN_GRP_5_4,
+			BIT(1));
+	}
+
+	/*
+	 * Fix-up: Set regulator LDO22 to 1.225 V in high power mode. Leave its
+	 * pull-down state intact. This ensures a safe shutdown.
+	 */
+	error = regmap_update_bits(regmap, PM8058_L22_CTRL, 0xbf, 0x93);
+	if (error)
+		return error;
+
+	/* Enable SMPL if resetting is desired */
+	mask = SLEEP_CTRL_SMPL_EN_RESET;
+	val = 0;
+	if (reset)
+		val = mask;
+	return regmap_update_bits(regmap, PM8058_SLEEP_CTRL, mask, val);
+}
+
+static int pm8921_pwrkey_shutdown(struct pmic8xxx_pwrkey *pwrkey, bool reset)
+{
+	struct regmap *regmap = pwrkey->regmap;
+	u8 mask = SLEEP_CTRL_SMPL_EN_RESET;
+	u8 val = 0;
+
+	/* Enable SMPL if resetting is desired */
+	if (reset)
+		val = mask;
+	return regmap_update_bits(regmap, PM8921_SLEEP_CTRL, mask, val);
+}
+
 static int pmic8xxx_pwrkey_probe(struct platform_device *pdev)
 {
 	struct input_dev *pwr;
@@ -109,6 +370,8 @@ static int pmic8xxx_pwrkey_probe(struct platform_device *pdev)
 	if (!pwrkey)
 		return -ENOMEM;
 
+	pwrkey->shutdown_fn = of_device_get_match_data(&pdev->dev);
+	pwrkey->regmap = regmap;
 	pwrkey->key_press_irq = key_press_irq;
 
 	pwr = devm_input_allocate_device(&pdev->dev);
@@ -182,8 +445,8 @@ static int pmic8xxx_pwrkey_remove(struct platform_device *pdev)
 }
 
 static const struct of_device_id pm8xxx_pwr_key_id_table[] = {
-	{ .compatible = "qcom,pm8058-pwrkey" },
-	{ .compatible = "qcom,pm8921-pwrkey" },
+	{ .compatible = "qcom,pm8058-pwrkey", .data = &pm8058_pwrkey_shutdown },
+	{ .compatible = "qcom,pm8921-pwrkey", .data = &pm8921_pwrkey_shutdown },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, pm8xxx_pwr_key_id_table);
@@ -191,6 +454,7 @@ MODULE_DEVICE_TABLE(of, pm8xxx_pwr_key_id_table);
 static struct platform_driver pmic8xxx_pwrkey_driver = {
 	.probe		= pmic8xxx_pwrkey_probe,
 	.remove		= pmic8xxx_pwrkey_remove,
+	.shutdown	= pmic8xxx_pwrkey_shutdown,
 	.driver		= {
 		.name	= "pm8xxx-pwrkey",
 		.pm	= &pm8xxx_pwr_key_pm_ops,
diff --git a/drivers/input/misc/pwm-beeper.c b/drivers/input/misc/pwm-beeper.c
index e82edf810..f2261ab54 100644
--- a/drivers/input/misc/pwm-beeper.c
+++ b/drivers/input/misc/pwm-beeper.c
@@ -173,6 +173,7 @@ static const struct of_device_id pwm_beeper_match[] = {
 	{ .compatible = "pwm-beeper", },
 	{ },
 };
+MODULE_DEVICE_TABLE(of, pwm_beeper_match);
 #endif
 
 static struct platform_driver pwm_beeper_driver = {
diff --git a/drivers/input/misc/rb532_button.c b/drivers/input/misc/rb532_button.c
index e956e81cd..62c5814c7 100644
--- a/drivers/input/misc/rb532_button.c
+++ b/drivers/input/misc/rb532_button.c
@@ -7,6 +7,7 @@
 #include <linux/input-polldev.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/gpio.h>
 
 #include <asm/mach-rc32434/gpio.h>
 #include <asm/mach-rc32434/rb.h>
diff --git a/drivers/input/misc/regulator-haptic.c b/drivers/input/misc/regulator-haptic.c
index 6bf3f1082..a804705eb 100644
--- a/drivers/input/misc/regulator-haptic.c
+++ b/drivers/input/misc/regulator-haptic.c
@@ -249,6 +249,7 @@ static const struct of_device_id regulator_haptic_dt_match[] = {
 	{ .compatible = "regulator-haptic" },
 	{ /* sentinel */ },
 };
+MODULE_DEVICE_TABLE(of, regulator_haptic_dt_match);
 
 static struct platform_driver regulator_haptic_driver = {
 	.probe		= regulator_haptic_probe,
diff --git a/drivers/input/misc/sparcspkr.c b/drivers/input/misc/sparcspkr.c
index 54116e544..6f997aa49 100644
--- a/drivers/input/misc/sparcspkr.c
+++ b/drivers/input/misc/sparcspkr.c
@@ -253,6 +253,7 @@ static const struct of_device_id bbc_beep_match[] = {
 	},
 	{},
 };
+MODULE_DEVICE_TABLE(of, bbc_beep_match);
 
 static struct platform_driver bbc_beep_driver = {
 	.driver = {
@@ -332,6 +333,7 @@ static const struct of_device_id grover_beep_match[] = {
 	},
 	{},
 };
+MODULE_DEVICE_TABLE(of, grover_beep_match);
 
 static struct platform_driver grover_beep_driver = {
 	.driver = {
diff --git a/drivers/input/misc/uinput.c b/drivers/input/misc/uinput.c
index 421e29e4c..5adbcedcb 100644
--- a/drivers/input/misc/uinput.c
+++ b/drivers/input/misc/uinput.c
@@ -320,10 +320,8 @@ static int uinput_validate_absbits(struct input_dev *dev)
 	 * Check if absmin/absmax/absfuzz/absflat are sane.
 	 */
 
-	for (cnt = 0; cnt < ABS_CNT; cnt++) {
+	for_each_set_bit(cnt, dev->absbit, ABS_CNT) {
 		int min, max;
-		if (!test_bit(cnt, dev->absbit))
-			continue;
 
 		min = input_abs_get_min(dev, cnt);
 		max = input_abs_get_max(dev, cnt);
diff --git a/drivers/input/misc/xen-kbdfront.c b/drivers/input/misc/xen-kbdfront.c
index 95599e478..23d054953 100644
--- a/drivers/input/misc/xen-kbdfront.c
+++ b/drivers/input/misc/xen-kbdfront.c
@@ -232,7 +232,7 @@ static int xenkbd_connect_backend(struct xenbus_device *dev,
 	struct xenbus_transaction xbt;
 
 	ret = gnttab_grant_foreign_access(dev->otherend_id,
-	                                  virt_to_mfn(info->page), 0);
+	                                  virt_to_gfn(info->page), 0);
 	if (ret < 0)
 		return ret;
 	info->gref = ret;
@@ -255,7 +255,7 @@ static int xenkbd_connect_backend(struct xenbus_device *dev,
 		goto error_irqh;
 	}
 	ret = xenbus_printf(xbt, dev->nodename, "page-ref", "%lu",
-			    virt_to_mfn(info->page));
+			    virt_to_gfn(info->page));
 	if (ret)
 		goto error_xenbus;
 	ret = xenbus_printf(xbt, dev->nodename, "page-gref", "%u", info->gref);