Linux-libre 4.6.2-gnu

1 files changed, 1317 insertions, 0 deletions

diff --git a/drivers/input/rmi4/rmi_f11.c b/drivers/input/rmi4/rmi_f11.c
new file mode 100644
index 000000000..ec8a10d53
--- /dev/null
+++ b/drivers/input/rmi4/rmi_f11.c
@@ -0,0 +1,1317 @@
+/*
+ * Copyright (c) 2011-2015 Synaptics Incorporated
+ * Copyright (c) 2011 Unixphere
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/input.h>
+#include <linux/input/mt.h>
+#include <linux/kconfig.h>
+#include <linux/rmi.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include "rmi_driver.h"
+#include "rmi_2d_sensor.h"
+
+#define F11_MAX_NUM_OF_FINGERS		10
+#define F11_MAX_NUM_OF_TOUCH_SHAPES	16
+
+#define FINGER_STATE_MASK	0x03
+
+#define F11_CTRL_SENSOR_MAX_X_POS_OFFSET	6
+#define F11_CTRL_SENSOR_MAX_Y_POS_OFFSET	8
+
+#define DEFAULT_XY_MAX 9999
+#define DEFAULT_MAX_ABS_MT_PRESSURE 255
+#define DEFAULT_MAX_ABS_MT_TOUCH 15
+#define DEFAULT_MAX_ABS_MT_ORIENTATION 1
+#define DEFAULT_MIN_ABS_MT_TRACKING_ID 1
+#define DEFAULT_MAX_ABS_MT_TRACKING_ID 10
+
+/** A note about RMI4 F11 register structure.
+ *
+ * The properties for
+ * a given sensor are described by its query registers.  The number of query
+ * registers and the layout of their contents are described by the F11 device
+ * queries as well as the sensor query information.
+ *
+ * Similarly, each sensor has control registers that govern its behavior.  The
+ * size and layout of the control registers for a given sensor can be determined
+ * by parsing that sensors query registers.
+ *
+ * And in a likewise fashion, each sensor has data registers where it reports
+ * its touch data and other interesting stuff.  The size and layout of a
+ * sensors data registers must be determined by parsing its query registers.
+ *
+ * The short story is that we need to read and parse a lot of query
+ * registers in order to determine the attributes of a sensor. Then
+ * we need to use that data to compute the size of the control and data
+ * registers for sensor.
+ *
+ * The end result is that we have a number of structs that aren't used to
+ * directly generate the input events, but their size, location and contents
+ * are critical to determining where the data we are interested in lives.
+ *
+ * At this time, the driver does not yet comprehend all possible F11
+ * configuration options, but it should be sufficient to cover 99% of RMI4 F11
+ * devices currently in the field.
+ */
+
+/* maximum ABS_MT_POSITION displacement (in mm) */
+#define DMAX 10
+
+/**
+ * @rezero - writing this to the F11 command register will cause the sensor to
+ * calibrate to the current capacitive state.
+ */
+#define RMI_F11_REZERO  0x01
+
+#define RMI_F11_HAS_QUERY9              (1 << 3)
+#define RMI_F11_HAS_QUERY11             (1 << 4)
+#define RMI_F11_HAS_QUERY12             (1 << 5)
+#define RMI_F11_HAS_QUERY27             (1 << 6)
+#define RMI_F11_HAS_QUERY28             (1 << 7)
+
+/** Defs for Query 1 */
+
+#define RMI_F11_NR_FINGERS_MASK 0x07
+#define RMI_F11_HAS_REL                 (1 << 3)
+#define RMI_F11_HAS_ABS                 (1 << 4)
+#define RMI_F11_HAS_GESTURES            (1 << 5)
+#define RMI_F11_HAS_SENSITIVITY_ADJ     (1 << 6)
+#define RMI_F11_CONFIGURABLE            (1 << 7)
+
+/** Defs for Query 2, 3, and 4. */
+#define RMI_F11_NR_ELECTRODES_MASK      0x7F
+
+/** Defs for Query 5 */
+
+#define RMI_F11_ABS_DATA_SIZE_MASK      0x03
+#define RMI_F11_HAS_ANCHORED_FINGER     (1 << 2)
+#define RMI_F11_HAS_ADJ_HYST            (1 << 3)
+#define RMI_F11_HAS_DRIBBLE             (1 << 4)
+#define RMI_F11_HAS_BENDING_CORRECTION  (1 << 5)
+#define RMI_F11_HAS_LARGE_OBJECT_SUPPRESSION    (1 << 6)
+#define RMI_F11_HAS_JITTER_FILTER       (1 << 7)
+
+/** Defs for Query 7 */
+#define RMI_F11_HAS_SINGLE_TAP                  (1 << 0)
+#define RMI_F11_HAS_TAP_AND_HOLD                (1 << 1)
+#define RMI_F11_HAS_DOUBLE_TAP                  (1 << 2)
+#define RMI_F11_HAS_EARLY_TAP                   (1 << 3)
+#define RMI_F11_HAS_FLICK                       (1 << 4)
+#define RMI_F11_HAS_PRESS                       (1 << 5)
+#define RMI_F11_HAS_PINCH                       (1 << 6)
+#define RMI_F11_HAS_CHIRAL                      (1 << 7)
+
+/** Defs for Query 8 */
+#define RMI_F11_HAS_PALM_DET                    (1 << 0)
+#define RMI_F11_HAS_ROTATE                      (1 << 1)
+#define RMI_F11_HAS_TOUCH_SHAPES                (1 << 2)
+#define RMI_F11_HAS_SCROLL_ZONES                (1 << 3)
+#define RMI_F11_HAS_INDIVIDUAL_SCROLL_ZONES     (1 << 4)
+#define RMI_F11_HAS_MF_SCROLL                   (1 << 5)
+#define RMI_F11_HAS_MF_EDGE_MOTION              (1 << 6)
+#define RMI_F11_HAS_MF_SCROLL_INERTIA           (1 << 7)
+
+/** Defs for Query 9. */
+#define RMI_F11_HAS_PEN                         (1 << 0)
+#define RMI_F11_HAS_PROXIMITY                   (1 << 1)
+#define RMI_F11_HAS_PALM_DET_SENSITIVITY        (1 << 2)
+#define RMI_F11_HAS_SUPPRESS_ON_PALM_DETECT     (1 << 3)
+#define RMI_F11_HAS_TWO_PEN_THRESHOLDS          (1 << 4)
+#define RMI_F11_HAS_CONTACT_GEOMETRY            (1 << 5)
+#define RMI_F11_HAS_PEN_HOVER_DISCRIMINATION    (1 << 6)
+#define RMI_F11_HAS_PEN_FILTERS                 (1 << 7)
+
+/** Defs for Query 10. */
+#define RMI_F11_NR_TOUCH_SHAPES_MASK            0x1F
+
+/** Defs for Query 11 */
+
+#define RMI_F11_HAS_Z_TUNING                    (1 << 0)
+#define RMI_F11_HAS_ALGORITHM_SELECTION         (1 << 1)
+#define RMI_F11_HAS_W_TUNING                    (1 << 2)
+#define RMI_F11_HAS_PITCH_INFO                  (1 << 3)
+#define RMI_F11_HAS_FINGER_SIZE                 (1 << 4)
+#define RMI_F11_HAS_SEGMENTATION_AGGRESSIVENESS (1 << 5)
+#define RMI_F11_HAS_XY_CLIP                     (1 << 6)
+#define RMI_F11_HAS_DRUMMING_FILTER             (1 << 7)
+
+/** Defs for Query 12. */
+
+#define RMI_F11_HAS_GAPLESS_FINGER              (1 << 0)
+#define RMI_F11_HAS_GAPLESS_FINGER_TUNING       (1 << 1)
+#define RMI_F11_HAS_8BIT_W                      (1 << 2)
+#define RMI_F11_HAS_ADJUSTABLE_MAPPING          (1 << 3)
+#define RMI_F11_HAS_INFO2                       (1 << 4)
+#define RMI_F11_HAS_PHYSICAL_PROPS              (1 << 5)
+#define RMI_F11_HAS_FINGER_LIMIT                (1 << 6)
+#define RMI_F11_HAS_LINEAR_COEFF                (1 << 7)
+
+/** Defs for Query 13. */
+
+#define RMI_F11_JITTER_WINDOW_MASK              0x1F
+#define RMI_F11_JITTER_FILTER_MASK              0x60
+#define RMI_F11_JITTER_FILTER_SHIFT             5
+
+/** Defs for Query 14. */
+#define RMI_F11_LIGHT_CONTROL_MASK              0x03
+#define RMI_F11_IS_CLEAR                        (1 << 2)
+#define RMI_F11_CLICKPAD_PROPS_MASK             0x18
+#define RMI_F11_CLICKPAD_PROPS_SHIFT            3
+#define RMI_F11_MOUSE_BUTTONS_MASK              0x60
+#define RMI_F11_MOUSE_BUTTONS_SHIFT             5
+#define RMI_F11_HAS_ADVANCED_GESTURES           (1 << 7)
+
+#define RMI_F11_QUERY_SIZE                      4
+#define RMI_F11_QUERY_GESTURE_SIZE              2
+
+#define F11_LIGHT_CTL_NONE 0x00
+#define F11_LUXPAD	   0x01
+#define F11_DUAL_MODE      0x02
+
+#define F11_NOT_CLICKPAD     0x00
+#define F11_HINGED_CLICKPAD  0x01
+#define F11_UNIFORM_CLICKPAD 0x02
+
+/**
+ * Query registers 1 through 4 are always present.
+ *
+ * @nr_fingers - describes the maximum number of fingers the 2-D sensor
+ * supports.
+ * @has_rel - the sensor supports relative motion reporting.
+ * @has_abs - the sensor supports absolute poition reporting.
+ * @has_gestures - the sensor supports gesture reporting.
+ * @has_sensitivity_adjust - the sensor supports a global sensitivity
+ * adjustment.
+ * @configurable - the sensor supports various configuration options.
+ * @num_of_x_electrodes -  the maximum number of electrodes the 2-D sensor
+ * supports on the X axis.
+ * @num_of_y_electrodes -  the maximum number of electrodes the 2-D sensor
+ * supports on the Y axis.
+ * @max_electrodes - the total number of X and Y electrodes that may be
+ * configured.
+ *
+ * Query 5 is present if the has_abs bit is set.
+ *
+ * @abs_data_size - describes the format of data reported by the absolute
+ * data source.  Only one format (the kind used here) is supported at this
+ * time.
+ * @has_anchored_finger - then the sensor supports the high-precision second
+ * finger tracking provided by the manual tracking and motion sensitivity
+ * options.
+ * @has_adjust_hyst - the difference between the finger release threshold and
+ * the touch threshold.
+ * @has_dribble - the sensor supports the generation of dribble interrupts,
+ * which may be enabled or disabled with the dribble control bit.
+ * @has_bending_correction - Bending related data registers 28 and 36, and
+ * control register 52..57 are present.
+ * @has_large_object_suppression - control register 58 and data register 28
+ * exist.
+ * @has_jitter_filter - query 13 and control 73..76 exist.
+ *
+ * Gesture information queries 7 and 8 are present if has_gestures bit is set.
+ *
+ * @has_single_tap - a basic single-tap gesture is supported.
+ * @has_tap_n_hold - tap-and-hold gesture is supported.
+ * @has_double_tap - double-tap gesture is supported.
+ * @has_early_tap - early tap is supported and reported as soon as the finger
+ * lifts for any tap event that could be interpreted as either a single tap
+ * or as the first tap of a double-tap or tap-and-hold gesture.
+ * @has_flick - flick detection is supported.
+ * @has_press - press gesture reporting is supported.
+ * @has_pinch - pinch gesture detection is supported.
+ * @has_palm_det - the 2-D sensor notifies the host whenever a large conductive
+ * object such as a palm or a cheek touches the 2-D sensor.
+ * @has_rotate - rotation gesture detection is supported.
+ * @has_touch_shapes - TouchShapes are supported.  A TouchShape is a fixed
+ * rectangular area on the sensor that behaves like a capacitive button.
+ * @has_scroll_zones - scrolling areas near the sensor edges are supported.
+ * @has_individual_scroll_zones - if 1, then 4 scroll zones are supported;
+ * if 0, then only two are supported.
+ * @has_mf_scroll - the multifinger_scrolling bit will be set when
+ * more than one finger is involved in a scrolling action.
+ *
+ * Convenience for checking bytes in the gesture info registers.  This is done
+ * often enough that we put it here to declutter the conditionals
+ *
+ * @query7_nonzero - true if none of the query 7 bits are set
+ * @query8_nonzero - true if none of the query 8 bits are set
+ *
+ * Query 9 is present if the has_query9 is set.
+ *
+ * @has_pen - detection of a stylus is supported and registers F11_2D_Ctrl20
+ * and F11_2D_Ctrl21 exist.
+ * @has_proximity - detection of fingers near the sensor is supported and
+ * registers F11_2D_Ctrl22 through F11_2D_Ctrl26 exist.
+ * @has_palm_det_sensitivity -  the sensor supports the palm detect sensitivity
+ * feature and register F11_2D_Ctrl27 exists.
+ * @has_two_pen_thresholds - is has_pen is also set, then F11_2D_Ctrl35 exists.
+ * @has_contact_geometry - the sensor supports the use of contact geometry to
+ * map absolute X and Y target positions and registers F11_2D_Data18
+ * through F11_2D_Data27 exist.
+ *
+ * Touch shape info (query 10) is present if has_touch_shapes is set.
+ *
+ * @nr_touch_shapes - the total number of touch shapes supported.
+ *
+ * Query 11 is present if the has_query11 bit is set in query 0.
+ *
+ * @has_z_tuning - if set, the sensor supports Z tuning and registers
+ * F11_2D_Ctrl29 through F11_2D_Ctrl33 exist.
+ * @has_algorithm_selection - controls choice of noise suppression algorithm
+ * @has_w_tuning - the sensor supports Wx and Wy scaling and registers
+ * F11_2D_Ctrl36 through F11_2D_Ctrl39 exist.
+ * @has_pitch_info - the X and Y pitches of the sensor electrodes can be
+ * configured and registers F11_2D_Ctrl40 and F11_2D_Ctrl41 exist.
+ * @has_finger_size -  the default finger width settings for the
+ * sensor can be configured and registers F11_2D_Ctrl42 through F11_2D_Ctrl44
+ * exist.
+ * @has_segmentation_aggressiveness - the sensor’s ability to distinguish
+ * multiple objects close together can be configured and register F11_2D_Ctrl45
+ * exists.
+ * @has_XY_clip -  the inactive outside borders of the sensor can be
+ * configured and registers F11_2D_Ctrl46 through F11_2D_Ctrl49 exist.
+ * @has_drumming_filter - the sensor can be configured to distinguish
+ * between a fast flick and a quick drumming movement and registers
+ * F11_2D_Ctrl50 and F11_2D_Ctrl51 exist.
+ *
+ * Query 12 is present if hasQuery12 bit is set.
+ *
+ * @has_gapless_finger - control registers relating to gapless finger are
+ * present.
+ * @has_gapless_finger_tuning - additional control and data registers relating
+ * to gapless finger are present.
+ * @has_8bit_w - larger W value reporting is supported.
+ * @has_adjustable_mapping - TBD
+ * @has_info2 - the general info query14 is present
+ * @has_physical_props - additional queries describing the physical properties
+ * of the sensor are present.
+ * @has_finger_limit - indicates that F11 Ctrl 80 exists.
+ * @has_linear_coeff - indicates that F11 Ctrl 81 exists.
+ *
+ * Query 13 is present if Query 5's has_jitter_filter bit is set.
+ * @jitter_window_size - used by Design Studio 4.
+ * @jitter_filter_type - used by Design Studio 4.
+ *
+ * Query 14 is present if query 12's has_general_info2 flag is set.
+ *
+ * @light_control - Indicates what light/led control features are present, if
+ * any.
+ * @is_clear - if set, this is a clear sensor (indicating direct pointing
+ * application), otherwise it's opaque (indicating indirect pointing).
+ * @clickpad_props - specifies if this is a clickpad, and if so what sort of
+ * mechanism it uses
+ * @mouse_buttons - specifies the number of mouse buttons present (if any).
+ * @has_advanced_gestures - advanced driver gestures are supported.
+ */
+struct f11_2d_sensor_queries {
+	/* query1 */
+	u8 nr_fingers;
+	bool has_rel;
+	bool has_abs;
+	bool has_gestures;
+	bool has_sensitivity_adjust;
+	bool configurable;
+
+	/* query2 */
+	u8 nr_x_electrodes;
+
+	/* query3 */
+	u8 nr_y_electrodes;
+
+	/* query4 */
+	u8 max_electrodes;
+
+	/* query5 */
+	u8 abs_data_size;
+	bool has_anchored_finger;
+	bool has_adj_hyst;
+	bool has_dribble;
+	bool has_bending_correction;
+	bool has_large_object_suppression;
+	bool has_jitter_filter;
+
+	u8 f11_2d_query6;
+
+	/* query 7 */
+	bool has_single_tap;
+	bool has_tap_n_hold;
+	bool has_double_tap;
+	bool has_early_tap;
+	bool has_flick;
+	bool has_press;
+	bool has_pinch;
+	bool has_chiral;
+
+	bool query7_nonzero;
+
+	/* query 8 */
+	bool has_palm_det;
+	bool has_rotate;
+	bool has_touch_shapes;
+	bool has_scroll_zones;
+	bool has_individual_scroll_zones;
+	bool has_mf_scroll;
+	bool has_mf_edge_motion;
+	bool has_mf_scroll_inertia;
+
+	bool query8_nonzero;
+
+	/* Query 9 */
+	bool has_pen;
+	bool has_proximity;
+	bool has_palm_det_sensitivity;
+	bool has_suppress_on_palm_detect;
+	bool has_two_pen_thresholds;
+	bool has_contact_geometry;
+	bool has_pen_hover_discrimination;
+	bool has_pen_filters;
+
+	/* Query 10 */
+	u8 nr_touch_shapes;
+
+	/* Query 11. */
+	bool has_z_tuning;
+	bool has_algorithm_selection;
+	bool has_w_tuning;
+	bool has_pitch_info;
+	bool has_finger_size;
+	bool has_segmentation_aggressiveness;
+	bool has_XY_clip;
+	bool has_drumming_filter;
+
+	/* Query 12 */
+	bool has_gapless_finger;
+	bool has_gapless_finger_tuning;
+	bool has_8bit_w;
+	bool has_adjustable_mapping;
+	bool has_info2;
+	bool has_physical_props;
+	bool has_finger_limit;
+	bool has_linear_coeff_2;
+
+	/* Query 13 */
+	u8 jitter_window_size;
+	u8 jitter_filter_type;
+
+	/* Query 14 */
+	u8 light_control;
+	bool is_clear;
+	u8 clickpad_props;
+	u8 mouse_buttons;
+	bool has_advanced_gestures;
+
+	/* Query 15 - 18 */
+	u16 x_sensor_size_mm;
+	u16 y_sensor_size_mm;
+};
+
+/* Defs for Ctrl0. */
+#define RMI_F11_REPORT_MODE_MASK        0x07
+#define RMI_F11_ABS_POS_FILT            (1 << 3)
+#define RMI_F11_REL_POS_FILT            (1 << 4)
+#define RMI_F11_REL_BALLISTICS          (1 << 5)
+#define RMI_F11_DRIBBLE                 (1 << 6)
+#define RMI_F11_REPORT_BEYOND_CLIP      (1 << 7)
+
+/* Defs for Ctrl1. */
+#define RMI_F11_PALM_DETECT_THRESH_MASK 0x0F
+#define RMI_F11_MOTION_SENSITIVITY_MASK 0x30
+#define RMI_F11_MANUAL_TRACKING         (1 << 6)
+#define RMI_F11_MANUAL_TRACKED_FINGER   (1 << 7)
+
+#define RMI_F11_DELTA_X_THRESHOLD       2
+#define RMI_F11_DELTA_Y_THRESHOLD       3
+
+#define RMI_F11_CTRL_REG_COUNT          12
+
+struct f11_2d_ctrl {
+	u8              ctrl0_11[RMI_F11_CTRL_REG_COUNT];
+	u16             ctrl0_11_address;
+};
+
+#define RMI_F11_ABS_BYTES 5
+#define RMI_F11_REL_BYTES 2
+
+/* Defs for Data 8 */
+
+#define RMI_F11_SINGLE_TAP              (1 << 0)
+#define RMI_F11_TAP_AND_HOLD            (1 << 1)
+#define RMI_F11_DOUBLE_TAP              (1 << 2)
+#define RMI_F11_EARLY_TAP               (1 << 3)
+#define RMI_F11_FLICK                   (1 << 4)
+#define RMI_F11_PRESS                   (1 << 5)
+#define RMI_F11_PINCH                   (1 << 6)
+
+/* Defs for Data 9 */
+
+#define RMI_F11_PALM_DETECT                     (1 << 0)
+#define RMI_F11_ROTATE                          (1 << 1)
+#define RMI_F11_SHAPE                           (1 << 2)
+#define RMI_F11_SCROLLZONE                      (1 << 3)
+#define RMI_F11_GESTURE_FINGER_COUNT_MASK       0x70
+
+/** Handy pointers into our data buffer.
+ *
+ * @f_state - start of finger state registers.
+ * @abs_pos - start of absolute position registers (if present).
+ * @rel_pos - start of relative data registers (if present).
+ * @gest_1  - gesture flags (if present).
+ * @gest_2  - gesture flags & finger count (if present).
+ * @pinch   - pinch motion register (if present).
+ * @flick   - flick distance X & Y, flick time (if present).
+ * @rotate  - rotate motion and finger separation.
+ * @multi_scroll - chiral deltas for X and Y (if present).
+ * @scroll_zones - scroll deltas for 4 regions (if present).
+ */
+struct f11_2d_data {
+	u8	*f_state;
+	u8	*abs_pos;
+	s8	*rel_pos;
+	u8	*gest_1;
+	u8	*gest_2;
+	s8	*pinch;
+	u8	*flick;
+	u8	*rotate;
+	u8	*shapes;
+	s8	*multi_scroll;
+	s8	*scroll_zones;
+};
+
+/** Data pertaining to F11 in general.  For per-sensor data, see struct
+ * f11_2d_sensor.
+ *
+ * @dev_query - F11 device specific query registers.
+ * @dev_controls - F11 device specific control registers.
+ * @dev_controls_mutex - lock for the control registers.
+ * @rezero_wait_ms - if nonzero, upon resume we will wait this many
+ * milliseconds before rezeroing the sensor(s).  This is useful in systems with
+ * poor electrical behavior on resume, where the initial calibration of the
+ * sensor(s) coming out of sleep state may be bogus.
+ * @sensors - per sensor data structures.
+ */
+struct f11_data {
+	bool has_query9;
+	bool has_query11;
+	bool has_query12;
+	bool has_query27;
+	bool has_query28;
+	bool has_acm;
+	struct f11_2d_ctrl dev_controls;
+	struct mutex dev_controls_mutex;
+	u16 rezero_wait_ms;
+	struct rmi_2d_sensor sensor;
+	struct f11_2d_sensor_queries sens_query;
+	struct f11_2d_data data;
+	struct rmi_2d_sensor_platform_data sensor_pdata;
+	unsigned long *abs_mask;
+	unsigned long *rel_mask;
+	unsigned long *result_bits;
+};
+
+enum f11_finger_state {
+	F11_NO_FINGER	= 0x00,
+	F11_PRESENT	= 0x01,
+	F11_INACCURATE	= 0x02,
+	F11_RESERVED	= 0x03
+};
+
+static void rmi_f11_rel_pos_report(struct f11_data *f11, u8 n_finger)
+{
+	struct rmi_2d_sensor *sensor = &f11->sensor;
+	struct f11_2d_data *data = &f11->data;
+	s8 x, y;
+
+	x = data->rel_pos[n_finger * 2];
+	y = data->rel_pos[n_finger * 2 + 1];
+
+	rmi_2d_sensor_rel_report(sensor, x, y);
+}
+
+static void rmi_f11_abs_pos_process(struct f11_data *f11,
+				   struct rmi_2d_sensor *sensor,
+				   struct rmi_2d_sensor_abs_object *obj,
+				   enum f11_finger_state finger_state,
+				   u8 n_finger)
+{
+	struct f11_2d_data *data = &f11->data;
+	u8 *pos_data = &data->abs_pos[n_finger * RMI_F11_ABS_BYTES];
+	int tool_type = MT_TOOL_FINGER;
+
+	switch (finger_state) {
+	case F11_PRESENT:
+		obj->type = RMI_2D_OBJECT_FINGER;
+		break;
+	default:
+		obj->type = RMI_2D_OBJECT_NONE;
+	}
+
+	obj->mt_tool = tool_type;
+	obj->x = (pos_data[0] << 4) | (pos_data[2] & 0x0F);
+	obj->y = (pos_data[1] << 4) | (pos_data[2] >> 4);
+	obj->z = pos_data[4];
+	obj->wx = pos_data[3] & 0x0f;
+	obj->wy = pos_data[3] >> 4;
+
+	rmi_2d_sensor_abs_process(sensor, obj, n_finger);
+}
+
+static inline u8 rmi_f11_parse_finger_state(const u8 *f_state, u8 n_finger)
+{
+	return (f_state[n_finger / 4] >> (2 * (n_finger % 4))) &
+							FINGER_STATE_MASK;
+}
+
+static void rmi_f11_finger_handler(struct f11_data *f11,
+				   struct rmi_2d_sensor *sensor,
+				   unsigned long *irq_bits, int num_irq_regs)
+{
+	const u8 *f_state = f11->data.f_state;
+	u8 finger_state;
+	u8 i;
+
+	int abs_bits = bitmap_and(f11->result_bits, irq_bits, f11->abs_mask,
+				  num_irq_regs * 8);
+	int rel_bits = bitmap_and(f11->result_bits, irq_bits, f11->rel_mask,
+				  num_irq_regs * 8);
+
+	for (i = 0; i < sensor->nbr_fingers; i++) {
+		/* Possible of having 4 fingers per f_statet register */
+		finger_state = rmi_f11_parse_finger_state(f_state, i);
+		if (finger_state == F11_RESERVED) {
+			pr_err("Invalid finger state[%d]: 0x%02x", i,
+				finger_state);
+			continue;
+		}
+
+		if (abs_bits)
+			rmi_f11_abs_pos_process(f11, sensor, &sensor->objs[i],
+							finger_state, i);
+
+		if (rel_bits)
+			rmi_f11_rel_pos_report(f11, i);
+	}
+
+	if (abs_bits) {
+		/*
+		 * the absolute part is made in 2 parts to allow the kernel
+		 * tracking to take place.
+		 */
+		if (sensor->kernel_tracking)
+			input_mt_assign_slots(sensor->input,
+					      sensor->tracking_slots,
+					      sensor->tracking_pos,
+					      sensor->nbr_fingers,
+					      sensor->dmax);
+
+		for (i = 0; i < sensor->nbr_fingers; i++) {
+			finger_state = rmi_f11_parse_finger_state(f_state, i);
+			if (finger_state == F11_RESERVED)
+				/* no need to send twice the error */
+				continue;
+
+			rmi_2d_sensor_abs_report(sensor, &sensor->objs[i], i);
+		}
+
+		input_mt_sync_frame(sensor->input);
+	}
+}
+
+static int f11_2d_construct_data(struct f11_data *f11)
+{
+	struct rmi_2d_sensor *sensor = &f11->sensor;
+	struct f11_2d_sensor_queries *query = &f11->sens_query;
+	struct f11_2d_data *data = &f11->data;
+	int i;
+
+	sensor->nbr_fingers = (query->nr_fingers == 5 ? 10 :
+				query->nr_fingers + 1);
+
+	sensor->pkt_size = DIV_ROUND_UP(sensor->nbr_fingers, 4);
+
+	if (query->has_abs) {
+		sensor->pkt_size += (sensor->nbr_fingers * 5);
+		sensor->attn_size = sensor->pkt_size;
+	}
+
+	if (query->has_rel)
+		sensor->pkt_size +=  (sensor->nbr_fingers * 2);
+
+	/* Check if F11_2D_Query7 is non-zero */
+	if (query->query7_nonzero)
+		sensor->pkt_size += sizeof(u8);
+
+	/* Check if F11_2D_Query7 or F11_2D_Query8 is non-zero */
+	if (query->query7_nonzero || query->query8_nonzero)
+		sensor->pkt_size += sizeof(u8);
+
+	if (query->has_pinch || query->has_flick || query->has_rotate) {
+		sensor->pkt_size += 3;
+		if (!query->has_flick)
+			sensor->pkt_size--;
+		if (!query->has_rotate)
+			sensor->pkt_size--;
+	}
+
+	if (query->has_touch_shapes)
+		sensor->pkt_size +=
+			DIV_ROUND_UP(query->nr_touch_shapes + 1, 8);
+
+	sensor->data_pkt = devm_kzalloc(&sensor->fn->dev, sensor->pkt_size,
+					GFP_KERNEL);
+	if (!sensor->data_pkt)
+		return -ENOMEM;
+
+	data->f_state = sensor->data_pkt;
+	i = DIV_ROUND_UP(sensor->nbr_fingers, 4);
+
+	if (query->has_abs) {
+		data->abs_pos = &sensor->data_pkt[i];
+		i += (sensor->nbr_fingers * RMI_F11_ABS_BYTES);
+	}
+
+	if (query->has_rel) {
+		data->rel_pos = &sensor->data_pkt[i];
+		i += (sensor->nbr_fingers * RMI_F11_REL_BYTES);
+	}
+
+	if (query->query7_nonzero) {
+		data->gest_1 = &sensor->data_pkt[i];
+		i++;
+	}
+
+	if (query->query7_nonzero || query->query8_nonzero) {
+		data->gest_2 = &sensor->data_pkt[i];
+		i++;
+	}
+
+	if (query->has_pinch) {
+		data->pinch = &sensor->data_pkt[i];
+		i++;
+	}
+
+	if (query->has_flick) {
+		if (query->has_pinch) {
+			data->flick = data->pinch;
+			i += 2;
+		} else {
+			data->flick = &sensor->data_pkt[i];
+			i += 3;
+		}
+	}
+
+	if (query->has_rotate) {
+		if (query->has_flick) {
+			data->rotate = data->flick + 1;
+		} else {
+			data->rotate = &sensor->data_pkt[i];
+			i += 2;
+		}
+	}
+
+	if (query->has_touch_shapes)
+		data->shapes = &sensor->data_pkt[i];
+
+	return 0;
+}
+
+static int f11_read_control_regs(struct rmi_function *fn,
+				struct f11_2d_ctrl *ctrl, u16 ctrl_base_addr) {
+	struct rmi_device *rmi_dev = fn->rmi_dev;
+	int error = 0;
+
+	ctrl->ctrl0_11_address = ctrl_base_addr;
+	error = rmi_read_block(rmi_dev, ctrl_base_addr, ctrl->ctrl0_11,
+				RMI_F11_CTRL_REG_COUNT);
+	if (error < 0) {
+		dev_err(&fn->dev, "Failed to read ctrl0, code: %d.\n", error);
+		return error;
+	}
+
+	return 0;
+}
+
+static int f11_write_control_regs(struct rmi_function *fn,
+					struct f11_2d_sensor_queries *query,
+					struct f11_2d_ctrl *ctrl,
+					u16 ctrl_base_addr)
+{
+	struct rmi_device *rmi_dev = fn->rmi_dev;
+	int error;
+
+	error = rmi_write_block(rmi_dev, ctrl_base_addr, ctrl->ctrl0_11,
+				RMI_F11_CTRL_REG_COUNT);
+	if (error < 0)
+		return error;
+
+	return 0;
+}
+
+static int rmi_f11_get_query_parameters(struct rmi_device *rmi_dev,
+			struct f11_data *f11,
+			struct f11_2d_sensor_queries *sensor_query,
+			u16 query_base_addr)
+{
+	int query_size;
+	int rc;
+	u8 query_buf[RMI_F11_QUERY_SIZE];
+	bool has_query36 = false;
+
+	rc = rmi_read_block(rmi_dev, query_base_addr, query_buf,
+				RMI_F11_QUERY_SIZE);
+	if (rc < 0)
+		return rc;
+
+	sensor_query->nr_fingers = query_buf[0] & RMI_F11_NR_FINGERS_MASK;
+	sensor_query->has_rel = !!(query_buf[0] & RMI_F11_HAS_REL);
+	sensor_query->has_abs = !!(query_buf[0] & RMI_F11_HAS_ABS);
+	sensor_query->has_gestures = !!(query_buf[0] & RMI_F11_HAS_GESTURES);
+	sensor_query->has_sensitivity_adjust =
+		!!(query_buf[0] & RMI_F11_HAS_SENSITIVITY_ADJ);
+	sensor_query->configurable = !!(query_buf[0] & RMI_F11_CONFIGURABLE);
+
+	sensor_query->nr_x_electrodes =
+				query_buf[1] & RMI_F11_NR_ELECTRODES_MASK;
+	sensor_query->nr_y_electrodes =
+				query_buf[2] & RMI_F11_NR_ELECTRODES_MASK;
+	sensor_query->max_electrodes =
+				query_buf[3] & RMI_F11_NR_ELECTRODES_MASK;
+
+	query_size = RMI_F11_QUERY_SIZE;
+
+	if (sensor_query->has_abs) {
+		rc = rmi_read(rmi_dev, query_base_addr + query_size, query_buf);
+		if (rc < 0)
+			return rc;
+
+		sensor_query->abs_data_size =
+			query_buf[0] & RMI_F11_ABS_DATA_SIZE_MASK;
+		sensor_query->has_anchored_finger =
+			!!(query_buf[0] & RMI_F11_HAS_ANCHORED_FINGER);
+		sensor_query->has_adj_hyst =
+			!!(query_buf[0] & RMI_F11_HAS_ADJ_HYST);
+		sensor_query->has_dribble =
+			!!(query_buf[0] & RMI_F11_HAS_DRIBBLE);
+		sensor_query->has_bending_correction =
+			!!(query_buf[0] & RMI_F11_HAS_BENDING_CORRECTION);
+		sensor_query->has_large_object_suppression =
+			!!(query_buf[0] & RMI_F11_HAS_LARGE_OBJECT_SUPPRESSION);
+		sensor_query->has_jitter_filter =
+			!!(query_buf[0] & RMI_F11_HAS_JITTER_FILTER);
+		query_size++;
+	}
+
+	if (sensor_query->has_rel) {
+		rc = rmi_read(rmi_dev, query_base_addr + query_size,
+					&sensor_query->f11_2d_query6);
+		if (rc < 0)
+			return rc;
+		query_size++;
+	}
+
+	if (sensor_query->has_gestures) {
+		rc = rmi_read_block(rmi_dev, query_base_addr + query_size,
+					query_buf, RMI_F11_QUERY_GESTURE_SIZE);
+		if (rc < 0)
+			return rc;
+
+		sensor_query->has_single_tap =
+			!!(query_buf[0] & RMI_F11_HAS_SINGLE_TAP);
+		sensor_query->has_tap_n_hold =
+			!!(query_buf[0] & RMI_F11_HAS_TAP_AND_HOLD);
+		sensor_query->has_double_tap =
+			!!(query_buf[0] & RMI_F11_HAS_DOUBLE_TAP);
+		sensor_query->has_early_tap =
+			!!(query_buf[0] & RMI_F11_HAS_EARLY_TAP);
+		sensor_query->has_flick =
+			!!(query_buf[0] & RMI_F11_HAS_FLICK);
+		sensor_query->has_press =
+			!!(query_buf[0] & RMI_F11_HAS_PRESS);
+		sensor_query->has_pinch =
+			!!(query_buf[0] & RMI_F11_HAS_PINCH);
+		sensor_query->has_chiral =
+			!!(query_buf[0] & RMI_F11_HAS_CHIRAL);
+
+		/* query 8 */
+		sensor_query->has_palm_det =
+			!!(query_buf[1] & RMI_F11_HAS_PALM_DET);
+		sensor_query->has_rotate =
+			!!(query_buf[1] & RMI_F11_HAS_ROTATE);
+		sensor_query->has_touch_shapes =
+			!!(query_buf[1] & RMI_F11_HAS_TOUCH_SHAPES);
+		sensor_query->has_scroll_zones =
+			!!(query_buf[1] & RMI_F11_HAS_SCROLL_ZONES);
+		sensor_query->has_individual_scroll_zones =
+			!!(query_buf[1] & RMI_F11_HAS_INDIVIDUAL_SCROLL_ZONES);
+		sensor_query->has_mf_scroll =
+			!!(query_buf[1] & RMI_F11_HAS_MF_SCROLL);
+		sensor_query->has_mf_edge_motion =
+			!!(query_buf[1] & RMI_F11_HAS_MF_EDGE_MOTION);
+		sensor_query->has_mf_scroll_inertia =
+			!!(query_buf[1] & RMI_F11_HAS_MF_SCROLL_INERTIA);
+
+		sensor_query->query7_nonzero = !!(query_buf[0]);
+		sensor_query->query8_nonzero = !!(query_buf[1]);
+
+		query_size += 2;
+	}
+
+	if (f11->has_query9) {
+		rc = rmi_read(rmi_dev, query_base_addr + query_size, query_buf);
+		if (rc < 0)
+			return rc;
+
+		sensor_query->has_pen =
+			!!(query_buf[0] & RMI_F11_HAS_PEN);
+		sensor_query->has_proximity =
+			!!(query_buf[0] & RMI_F11_HAS_PROXIMITY);
+		sensor_query->has_palm_det_sensitivity =
+			!!(query_buf[0] & RMI_F11_HAS_PALM_DET_SENSITIVITY);
+		sensor_query->has_suppress_on_palm_detect =
+			!!(query_buf[0] & RMI_F11_HAS_SUPPRESS_ON_PALM_DETECT);
+		sensor_query->has_two_pen_thresholds =
+			!!(query_buf[0] & RMI_F11_HAS_TWO_PEN_THRESHOLDS);
+		sensor_query->has_contact_geometry =
+			!!(query_buf[0] & RMI_F11_HAS_CONTACT_GEOMETRY);
+		sensor_query->has_pen_hover_discrimination =
+			!!(query_buf[0] & RMI_F11_HAS_PEN_HOVER_DISCRIMINATION);
+		sensor_query->has_pen_filters =
+			!!(query_buf[0] & RMI_F11_HAS_PEN_FILTERS);
+
+		query_size++;
+	}
+
+	if (sensor_query->has_touch_shapes) {
+		rc = rmi_read(rmi_dev, query_base_addr + query_size, query_buf);
+		if (rc < 0)
+			return rc;
+
+		sensor_query->nr_touch_shapes = query_buf[0] &
+				RMI_F11_NR_TOUCH_SHAPES_MASK;
+
+		query_size++;
+	}
+
+	if (f11->has_query11) {
+		rc = rmi_read(rmi_dev, query_base_addr + query_size, query_buf);
+		if (rc < 0)
+			return rc;
+
+		sensor_query->has_z_tuning =
+			!!(query_buf[0] & RMI_F11_HAS_Z_TUNING);
+		sensor_query->has_algorithm_selection =
+			!!(query_buf[0] & RMI_F11_HAS_ALGORITHM_SELECTION);
+		sensor_query->has_w_tuning =
+			!!(query_buf[0] & RMI_F11_HAS_W_TUNING);
+		sensor_query->has_pitch_info =
+			!!(query_buf[0] & RMI_F11_HAS_PITCH_INFO);
+		sensor_query->has_finger_size =
+			!!(query_buf[0] & RMI_F11_HAS_FINGER_SIZE);
+		sensor_query->has_segmentation_aggressiveness =
+			!!(query_buf[0] &
+				RMI_F11_HAS_SEGMENTATION_AGGRESSIVENESS);
+		sensor_query->has_XY_clip =
+			!!(query_buf[0] & RMI_F11_HAS_XY_CLIP);
+		sensor_query->has_drumming_filter =
+			!!(query_buf[0] & RMI_F11_HAS_DRUMMING_FILTER);
+
+		query_size++;
+	}
+
+	if (f11->has_query12) {
+		rc = rmi_read(rmi_dev, query_base_addr + query_size, query_buf);
+		if (rc < 0)
+			return rc;
+
+		sensor_query->has_gapless_finger =
+			!!(query_buf[0] & RMI_F11_HAS_GAPLESS_FINGER);
+		sensor_query->has_gapless_finger_tuning =
+			!!(query_buf[0] & RMI_F11_HAS_GAPLESS_FINGER_TUNING);
+		sensor_query->has_8bit_w =
+			!!(query_buf[0] & RMI_F11_HAS_8BIT_W);
+		sensor_query->has_adjustable_mapping =
+			!!(query_buf[0] & RMI_F11_HAS_ADJUSTABLE_MAPPING);
+		sensor_query->has_info2 =
+			!!(query_buf[0] & RMI_F11_HAS_INFO2);
+		sensor_query->has_physical_props =
+			!!(query_buf[0] & RMI_F11_HAS_PHYSICAL_PROPS);
+		sensor_query->has_finger_limit =
+			!!(query_buf[0] & RMI_F11_HAS_FINGER_LIMIT);
+		sensor_query->has_linear_coeff_2 =
+			!!(query_buf[0] & RMI_F11_HAS_LINEAR_COEFF);
+
+		query_size++;
+	}
+
+	if (sensor_query->has_jitter_filter) {
+		rc = rmi_read(rmi_dev, query_base_addr + query_size, query_buf);
+		if (rc < 0)
+			return rc;
+
+		sensor_query->jitter_window_size = query_buf[0] &
+			RMI_F11_JITTER_WINDOW_MASK;
+		sensor_query->jitter_filter_type = (query_buf[0] &
+			RMI_F11_JITTER_FILTER_MASK) >>
+			RMI_F11_JITTER_FILTER_SHIFT;
+
+		query_size++;
+	}
+
+	if (sensor_query->has_info2) {
+		rc = rmi_read(rmi_dev, query_base_addr + query_size, query_buf);
+		if (rc < 0)
+			return rc;
+
+		sensor_query->light_control =
+			query_buf[0] & RMI_F11_LIGHT_CONTROL_MASK;
+		sensor_query->is_clear =
+			!!(query_buf[0] & RMI_F11_IS_CLEAR);
+		sensor_query->clickpad_props =
+			(query_buf[0] & RMI_F11_CLICKPAD_PROPS_MASK) >>
+			RMI_F11_CLICKPAD_PROPS_SHIFT;
+		sensor_query->mouse_buttons =
+			(query_buf[0] & RMI_F11_MOUSE_BUTTONS_MASK) >>
+			RMI_F11_MOUSE_BUTTONS_SHIFT;
+		sensor_query->has_advanced_gestures =
+			!!(query_buf[0] & RMI_F11_HAS_ADVANCED_GESTURES);
+
+		query_size++;
+	}
+
+	if (sensor_query->has_physical_props) {
+		rc = rmi_read_block(rmi_dev, query_base_addr
+			+ query_size, query_buf, 4);
+		if (rc < 0)
+			return rc;
+
+		sensor_query->x_sensor_size_mm =
+			(query_buf[0] | (query_buf[1] << 8)) / 10;
+		sensor_query->y_sensor_size_mm =
+			(query_buf[2] | (query_buf[3] << 8)) / 10;
+
+		/*
+		 * query 15 - 18 contain the size of the sensor
+		 * and query 19 - 26 contain bezel dimensions
+		 */
+		query_size += 12;
+	}
+
+	if (f11->has_query27)
+		++query_size;
+
+	if (f11->has_query28) {
+		rc = rmi_read(rmi_dev, query_base_addr + query_size,
+				query_buf);
+		if (rc < 0)
+			return rc;
+
+		has_query36 = !!(query_buf[0] & BIT(6));
+	}
+
+	if (has_query36) {
+		query_size += 2;
+		rc = rmi_read(rmi_dev, query_base_addr + query_size,
+				query_buf);
+		if (rc < 0)
+			return rc;
+
+		if (!!(query_buf[0] & BIT(5)))
+			f11->has_acm = true;
+	}
+
+	return query_size;
+}
+
+static int rmi_f11_initialize(struct rmi_function *fn)
+{
+	struct rmi_device *rmi_dev = fn->rmi_dev;
+	struct f11_data *f11;
+	struct f11_2d_ctrl *ctrl;
+	u8 query_offset;
+	u16 query_base_addr;
+	u16 control_base_addr;
+	u16 max_x_pos, max_y_pos;
+	int rc;
+	const struct rmi_device_platform_data *pdata =
+				rmi_get_platform_data(rmi_dev);
+	struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev);
+	struct rmi_2d_sensor *sensor;
+	u8 buf;
+	int mask_size;
+
+	rmi_dbg(RMI_DEBUG_FN, &fn->dev, "Initializing F11 values.\n");
+
+	mask_size = BITS_TO_LONGS(drvdata->irq_count) * sizeof(unsigned long);
+
+	/*
+	** init instance data, fill in values and create any sysfs files
+	*/
+	f11 = devm_kzalloc(&fn->dev, sizeof(struct f11_data) + mask_size * 3,
+			GFP_KERNEL);
+	if (!f11)
+		return -ENOMEM;
+
+	if (fn->dev.of_node) {
+		rc = rmi_2d_sensor_of_probe(&fn->dev, &f11->sensor_pdata);
+		if (rc)
+			return rc;
+	} else if (pdata->sensor_pdata) {
+		f11->sensor_pdata = *pdata->sensor_pdata;
+	}
+
+	f11->rezero_wait_ms = f11->sensor_pdata.rezero_wait;
+
+	f11->abs_mask = (unsigned long *)((char *)f11
+			+ sizeof(struct f11_data));
+	f11->rel_mask = (unsigned long *)((char *)f11
+			+ sizeof(struct f11_data) + mask_size);
+	f11->result_bits = (unsigned long *)((char *)f11
+			+ sizeof(struct f11_data) + mask_size * 2);
+
+	set_bit(fn->irq_pos, f11->abs_mask);
+	set_bit(fn->irq_pos + 1, f11->rel_mask);
+
+	query_base_addr = fn->fd.query_base_addr;
+	control_base_addr = fn->fd.control_base_addr;
+
+	rc = rmi_read(rmi_dev, query_base_addr, &buf);
+	if (rc < 0)
+		return rc;
+
+	f11->has_query9 = !!(buf & RMI_F11_HAS_QUERY9);
+	f11->has_query11 = !!(buf & RMI_F11_HAS_QUERY11);
+	f11->has_query12 = !!(buf & RMI_F11_HAS_QUERY12);
+	f11->has_query27 = !!(buf & RMI_F11_HAS_QUERY27);
+	f11->has_query28 = !!(buf & RMI_F11_HAS_QUERY28);
+
+	query_offset = (query_base_addr + 1);
+	sensor = &f11->sensor;
+	sensor->fn = fn;
+
+	rc = rmi_f11_get_query_parameters(rmi_dev, f11,
+			&f11->sens_query, query_offset);
+	if (rc < 0)
+		return rc;
+	query_offset += rc;
+
+	rc = f11_read_control_regs(fn, &f11->dev_controls,
+			control_base_addr);
+	if (rc < 0) {
+		dev_err(&fn->dev,
+			"Failed to read F11 control params.\n");
+		return rc;
+	}
+
+	if (f11->sens_query.has_info2) {
+		if (f11->sens_query.is_clear)
+			f11->sensor.sensor_type = rmi_sensor_touchscreen;
+		else
+			f11->sensor.sensor_type = rmi_sensor_touchpad;
+	}
+
+	sensor->report_abs = f11->sens_query.has_abs;
+
+	sensor->axis_align =
+		f11->sensor_pdata.axis_align;
+
+	sensor->topbuttonpad = f11->sensor_pdata.topbuttonpad;
+	sensor->kernel_tracking = f11->sensor_pdata.kernel_tracking;
+	sensor->dmax = f11->sensor_pdata.dmax;
+
+	if (f11->sens_query.has_physical_props) {
+		sensor->x_mm = f11->sens_query.x_sensor_size_mm;
+		sensor->y_mm = f11->sens_query.y_sensor_size_mm;
+	} else {
+		sensor->x_mm = f11->sensor_pdata.x_mm;
+		sensor->y_mm = f11->sensor_pdata.y_mm;
+	}
+
+	if (sensor->sensor_type == rmi_sensor_default)
+		sensor->sensor_type =
+			f11->sensor_pdata.sensor_type;
+
+	sensor->report_abs = sensor->report_abs
+		&& !(f11->sensor_pdata.disable_report_mask
+			& RMI_F11_DISABLE_ABS_REPORT);
+
+	if (!sensor->report_abs)
+		/*
+		 * If device doesn't have abs or if it has been disables
+		 * fallback to reporting rel data.
+		 */
+		sensor->report_rel = f11->sens_query.has_rel;
+
+	rc = rmi_read_block(rmi_dev,
+		control_base_addr + F11_CTRL_SENSOR_MAX_X_POS_OFFSET,
+		(u8 *)&max_x_pos, sizeof(max_x_pos));
+	if (rc < 0)
+		return rc;
+
+	rc = rmi_read_block(rmi_dev,
+		control_base_addr + F11_CTRL_SENSOR_MAX_Y_POS_OFFSET,
+		(u8 *)&max_y_pos, sizeof(max_y_pos));
+	if (rc < 0)
+		return rc;
+
+	sensor->max_x = max_x_pos;
+	sensor->max_y = max_y_pos;
+
+	rc = f11_2d_construct_data(f11);
+	if (rc < 0)
+		return rc;
+
+	if (f11->has_acm)
+		f11->sensor.attn_size += f11->sensor.nbr_fingers * 2;
+
+	/* allocate the in-kernel tracking buffers */
+	sensor->tracking_pos = devm_kzalloc(&fn->dev,
+			sizeof(struct input_mt_pos) * sensor->nbr_fingers,
+			GFP_KERNEL);
+	sensor->tracking_slots = devm_kzalloc(&fn->dev,
+			sizeof(int) * sensor->nbr_fingers, GFP_KERNEL);
+	sensor->objs = devm_kzalloc(&fn->dev,
+			sizeof(struct rmi_2d_sensor_abs_object)
+			* sensor->nbr_fingers, GFP_KERNEL);
+	if (!sensor->tracking_pos || !sensor->tracking_slots || !sensor->objs)
+		return -ENOMEM;
+
+	ctrl = &f11->dev_controls;
+	if (sensor->axis_align.delta_x_threshold)
+		ctrl->ctrl0_11[RMI_F11_DELTA_X_THRESHOLD] =
+			sensor->axis_align.delta_x_threshold;
+
+	if (sensor->axis_align.delta_y_threshold)
+		ctrl->ctrl0_11[RMI_F11_DELTA_Y_THRESHOLD] =
+			sensor->axis_align.delta_y_threshold;
+
+	if (f11->sens_query.has_dribble)
+		ctrl->ctrl0_11[0] = ctrl->ctrl0_11[0] & ~BIT(6);
+
+	if (f11->sens_query.has_palm_det)
+		ctrl->ctrl0_11[11] = ctrl->ctrl0_11[11] & ~BIT(0);
+
+	rc = f11_write_control_regs(fn, &f11->sens_query,
+			   &f11->dev_controls, fn->fd.query_base_addr);
+	if (rc)
+		dev_warn(&fn->dev, "Failed to write control registers\n");
+
+	mutex_init(&f11->dev_controls_mutex);
+
+	dev_set_drvdata(&fn->dev, f11);
+
+	return 0;
+}
+
+static int rmi_f11_config(struct rmi_function *fn)
+{
+	struct f11_data *f11 = dev_get_drvdata(&fn->dev);
+	struct rmi_driver *drv = fn->rmi_dev->driver;
+	struct rmi_2d_sensor *sensor = &f11->sensor;
+	int rc;
+
+	if (!sensor->report_abs)
+		drv->clear_irq_bits(fn->rmi_dev, f11->abs_mask);
+	else
+		drv->set_irq_bits(fn->rmi_dev, f11->abs_mask);
+
+	if (!sensor->report_rel)
+		drv->clear_irq_bits(fn->rmi_dev, f11->rel_mask);
+	else
+		drv->set_irq_bits(fn->rmi_dev, f11->rel_mask);
+
+	rc = f11_write_control_regs(fn, &f11->sens_query,
+			   &f11->dev_controls, fn->fd.query_base_addr);
+	if (rc < 0)
+		return rc;
+
+	return 0;
+}
+
+static int rmi_f11_attention(struct rmi_function *fn, unsigned long *irq_bits)
+{
+	struct rmi_device *rmi_dev = fn->rmi_dev;
+	struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev);
+	struct f11_data *f11 = dev_get_drvdata(&fn->dev);
+	u16 data_base_addr = fn->fd.data_base_addr;
+	u16 data_base_addr_offset = 0;
+	int error;
+
+	if (rmi_dev->xport->attn_data) {
+		memcpy(f11->sensor.data_pkt, rmi_dev->xport->attn_data,
+			f11->sensor.attn_size);
+		rmi_dev->xport->attn_data += f11->sensor.attn_size;
+		rmi_dev->xport->attn_size -= f11->sensor.attn_size;
+	} else {
+		error = rmi_read_block(rmi_dev,
+				data_base_addr + data_base_addr_offset,
+				f11->sensor.data_pkt,
+				f11->sensor.pkt_size);
+		if (error < 0)
+			return error;
+	}
+
+	rmi_f11_finger_handler(f11, &f11->sensor, irq_bits,
+				drvdata->num_of_irq_regs);
+	data_base_addr_offset += f11->sensor.pkt_size;
+
+	return 0;
+}
+
+static int rmi_f11_resume(struct rmi_function *fn)
+{
+	struct f11_data *f11 = dev_get_drvdata(&fn->dev);
+	int error;
+
+	rmi_dbg(RMI_DEBUG_FN, &fn->dev, "Resuming...\n");
+	if (!f11->rezero_wait_ms)
+		return 0;
+
+	mdelay(f11->rezero_wait_ms);
+
+	error = rmi_write(fn->rmi_dev, fn->fd.command_base_addr,
+				RMI_F11_REZERO);
+	if (error) {
+		dev_err(&fn->dev,
+			"%s: failed to issue rezero command, error = %d.",
+			__func__, error);
+		return error;
+	}
+
+	return 0;
+}
+
+static int rmi_f11_probe(struct rmi_function *fn)
+{
+	int error;
+	struct f11_data *f11;
+
+	error = rmi_f11_initialize(fn);
+	if (error)
+		return error;
+
+	f11 = dev_get_drvdata(&fn->dev);
+	error = rmi_2d_sensor_configure_input(fn, &f11->sensor);
+	if (error)
+		return error;
+
+	return 0;
+}
+
+struct rmi_function_handler rmi_f11_handler = {
+	.driver = {
+		.name	= "rmi4_f11",
+	},
+	.func		= 0x11,
+	.probe		= rmi_f11_probe,
+	.config		= rmi_f11_config,
+	.attention	= rmi_f11_attention,
+	.resume		= rmi_f11_resume,
+};