Initial import

1 files changed, 620 insertions, 0 deletions

diff --git a/drivers/input/tablet/wacom_serial4.c b/drivers/input/tablet/wacom_serial4.c
new file mode 100644
index 000000000..20ab80246
--- /dev/null
+++ b/drivers/input/tablet/wacom_serial4.c
@@ -0,0 +1,620 @@
+/*
+ * Wacom protocol 4 serial tablet driver
+ *
+ * Copyright 2014      Hans de Goede <hdegoede@redhat.com>
+ * Copyright 2011-2012 Julian Squires <julian@cipht.net>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version of 2 of the License, or (at your
+ * option) any later version. See the file COPYING in the main directory of
+ * this archive for more details.
+ *
+ * Many thanks to Bill Seremetis, without whom PenPartner support
+ * would not have been possible. Thanks to Patrick Mahoney.
+ *
+ * This driver was developed with reference to much code written by others,
+ * particularly:
+ *  - elo, gunze drivers by Vojtech Pavlik <vojtech@ucw.cz>;
+ *  - wacom_w8001 driver by Jaya Kumar <jayakumar.lkml@gmail.com>;
+ *  - the USB wacom input driver, credited to many people
+ *    (see drivers/input/tablet/wacom.h);
+ *  - new and old versions of linuxwacom / xf86-input-wacom credited to
+ *    Frederic Lepied, France. <Lepied@XFree86.org> and
+ *    Ping Cheng, Wacom. <pingc@wacom.com>;
+ *  - and xf86wacom.c (a presumably ancient version of the linuxwacom code),
+ *    by Frederic Lepied and Raph Levien <raph@gtk.org>.
+ *
+ * To do:
+ *  - support pad buttons; (requires access to a model with pad buttons)
+ *  - support (protocol 4-style) tilt (requires access to a > 1.4 rom model)
+ */
+
+/*
+ * Wacom serial protocol 4 documentation taken from linuxwacom-0.9.9 code,
+ * protocol 4 uses 7 or 9 byte of data in the following format:
+ *
+ *	Byte 1
+ *	bit 7  Sync bit always 1
+ *	bit 6  Pointing device detected
+ *	bit 5  Cursor = 0 / Stylus = 1
+ *	bit 4  Reserved
+ *	bit 3  1 if a button on the pointing device has been pressed
+ *	bit 2  P0 (optional)
+ *	bit 1  X15
+ *	bit 0  X14
+ *
+ *	Byte 2
+ *	bit 7  Always 0
+ *	bits 6-0 = X13 - X7
+ *
+ *	Byte 3
+ *	bit 7  Always 0
+ *	bits 6-0 = X6 - X0
+ *
+ *	Byte 4
+ *	bit 7  Always 0
+ *	bit 6  B3
+ *	bit 5  B2
+ *	bit 4  B1
+ *	bit 3  B0
+ *	bit 2  P1 (optional)
+ *	bit 1  Y15
+ *	bit 0  Y14
+ *
+ *	Byte 5
+ *	bit 7  Always 0
+ *	bits 6-0 = Y13 - Y7
+ *
+ *	Byte 6
+ *	bit 7  Always 0
+ *	bits 6-0 = Y6 - Y0
+ *
+ *	Byte 7
+ *	bit 7 Always 0
+ *	bit 6  Sign of pressure data; or wheel-rel for cursor tool
+ *	bit 5  P7; or REL1 for cursor tool
+ *	bit 4  P6; or REL0 for cursor tool
+ *	bit 3  P5
+ *	bit 2  P4
+ *	bit 1  P3
+ *	bit 0  P2
+ *
+ *	byte 8 and 9 are optional and present only
+ *	in tilt mode.
+ *
+ *	Byte 8
+ *	bit 7 Always 0
+ *	bit 6 Sign of tilt X
+ *	bit 5  Xt6
+ *	bit 4  Xt5
+ *	bit 3  Xt4
+ *	bit 2  Xt3
+ *	bit 1  Xt2
+ *	bit 0  Xt1
+ *
+ *	Byte 9
+ *	bit 7 Always 0
+ *	bit 6 Sign of tilt Y
+ *	bit 5  Yt6
+ *	bit 4  Yt5
+ *	bit 3  Yt4
+ *	bit 2  Yt3
+ *	bit 1  Yt2
+ *	bit 0  Yt1
+ */
+
+#include <linux/completion.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/serio.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+
+MODULE_AUTHOR("Julian Squires <julian@cipht.net>, Hans de Goede <hdegoede@redhat.com>");
+MODULE_DESCRIPTION("Wacom protocol 4 serial tablet driver");
+MODULE_LICENSE("GPL");
+
+#define REQUEST_MODEL_AND_ROM_VERSION	"~#"
+#define REQUEST_MAX_COORDINATES		"~C\r"
+#define REQUEST_CONFIGURATION_STRING	"~R\r"
+#define REQUEST_RESET_TO_PROTOCOL_IV	"\r#"
+/*
+ * Note: sending "\r$\r" causes at least the Digitizer II to send
+ * packets in ASCII instead of binary.  "\r#" seems to undo that.
+ */
+
+#define COMMAND_START_SENDING_PACKETS		"ST\r"
+#define COMMAND_STOP_SENDING_PACKETS		"SP\r"
+#define COMMAND_MULTI_MODE_INPUT		"MU1\r"
+#define COMMAND_ORIGIN_IN_UPPER_LEFT		"OC1\r"
+#define COMMAND_ENABLE_ALL_MACRO_BUTTONS	"~M0\r"
+#define COMMAND_DISABLE_GROUP_1_MACRO_BUTTONS	"~M1\r"
+#define COMMAND_TRANSMIT_AT_MAX_RATE		"IT0\r"
+#define COMMAND_DISABLE_INCREMENTAL_MODE	"IN0\r"
+#define COMMAND_ENABLE_CONTINUOUS_MODE		"SR\r"
+#define COMMAND_ENABLE_PRESSURE_MODE		"PH1\r"
+#define COMMAND_Z_FILTER			"ZF1\r"
+
+/* Note that this is a protocol 4 packet without tilt information. */
+#define PACKET_LENGTH		7
+#define DATA_SIZE		32
+
+/* flags */
+#define F_COVERS_SCREEN		0x01
+#define F_HAS_STYLUS2		0x02
+#define F_HAS_SCROLLWHEEL	0x04
+
+/* device IDs */
+#define STYLUS_DEVICE_ID	0x02
+#define CURSOR_DEVICE_ID	0x06
+#define ERASER_DEVICE_ID	0x0A
+
+enum { STYLUS = 1, ERASER, CURSOR };
+
+static const struct {
+	int device_id;
+	int input_id;
+} tools[] = {
+	{ 0, 0 },
+	{ STYLUS_DEVICE_ID, BTN_TOOL_PEN },
+	{ ERASER_DEVICE_ID, BTN_TOOL_RUBBER },
+	{ CURSOR_DEVICE_ID, BTN_TOOL_MOUSE },
+};
+
+struct wacom {
+	struct input_dev *dev;
+	struct completion cmd_done;
+	int result;
+	u8 expect;
+	u8 eraser_mask;
+	unsigned int extra_z_bits;
+	unsigned int flags;
+	unsigned int res_x, res_y;
+	unsigned int max_x, max_y;
+	unsigned int tool;
+	unsigned int idx;
+	u8 data[DATA_SIZE];
+	char phys[32];
+};
+
+enum {
+	MODEL_CINTIQ		= 0x504C, /* PL */
+	MODEL_CINTIQ2		= 0x4454, /* DT */
+	MODEL_DIGITIZER_II	= 0x5544, /* UD */
+	MODEL_GRAPHIRE		= 0x4554, /* ET */
+	MODEL_PENPARTNER	= 0x4354, /* CT */
+};
+
+static void wacom_handle_model_response(struct wacom *wacom)
+{
+	int major_v, minor_v, r = 0;
+	char *p;
+
+	p = strrchr(wacom->data, 'V');
+	if (p)
+		r = sscanf(p + 1, "%u.%u", &major_v, &minor_v);
+	if (r != 2)
+		major_v = minor_v = 0;
+
+	switch (wacom->data[2] << 8 | wacom->data[3]) {
+	case MODEL_CINTIQ:	/* UNTESTED */
+	case MODEL_CINTIQ2:
+		if ((wacom->data[2] << 8 | wacom->data[3]) == MODEL_CINTIQ) {
+			wacom->dev->name = "Wacom Cintiq";
+			wacom->dev->id.version = MODEL_CINTIQ;
+		} else {
+			wacom->dev->name = "Wacom Cintiq II";
+			wacom->dev->id.version = MODEL_CINTIQ2;
+		}
+		wacom->res_x = 508;
+		wacom->res_y = 508;
+
+		switch (wacom->data[5] << 8 | wacom->data[6]) {
+		case 0x3731: /* PL-710 */
+			wacom->res_x = 2540;
+			wacom->res_y = 2540;
+			/* fall through */
+		case 0x3535: /* PL-550 */
+		case 0x3830: /* PL-800 */
+			wacom->extra_z_bits = 2;
+		}
+
+		wacom->flags = F_COVERS_SCREEN;
+		break;
+
+	case MODEL_PENPARTNER:
+		wacom->dev->name = "Wacom Penpartner";
+		wacom->dev->id.version = MODEL_PENPARTNER;
+		wacom->res_x = 1000;
+		wacom->res_y = 1000;
+		break;
+
+	case MODEL_GRAPHIRE:
+		wacom->dev->name = "Wacom Graphire";
+		wacom->dev->id.version = MODEL_GRAPHIRE;
+		wacom->res_x = 1016;
+		wacom->res_y = 1016;
+		wacom->max_x = 5103;
+		wacom->max_y = 3711;
+		wacom->extra_z_bits = 2;
+		wacom->eraser_mask = 0x08;
+		wacom->flags = F_HAS_STYLUS2 | F_HAS_SCROLLWHEEL;
+		break;
+
+	case MODEL_DIGITIZER_II:
+		wacom->dev->name = "Wacom Digitizer II";
+		wacom->dev->id.version = MODEL_DIGITIZER_II;
+		if (major_v == 1 && minor_v <= 2)
+			wacom->extra_z_bits = 0; /* UNTESTED */
+		break;
+
+	default:
+		dev_err(&wacom->dev->dev, "Unsupported Wacom model %s\n",
+			wacom->data);
+		wacom->result = -ENODEV;
+		return;
+	}
+
+	dev_info(&wacom->dev->dev, "%s tablet, version %u.%u\n",
+		 wacom->dev->name, major_v, minor_v);
+}
+
+static void wacom_handle_configuration_response(struct wacom *wacom)
+{
+	int r, skip;
+
+	dev_dbg(&wacom->dev->dev, "Configuration string: %s\n", wacom->data);
+	r = sscanf(wacom->data, "~R%x,%u,%u,%u,%u", &skip, &skip, &skip,
+		   &wacom->res_x, &wacom->res_y);
+	if (r != 5)
+		dev_warn(&wacom->dev->dev, "could not get resolution\n");
+}
+
+static void wacom_handle_coordinates_response(struct wacom *wacom)
+{
+	int r;
+
+	dev_dbg(&wacom->dev->dev, "Coordinates string: %s\n", wacom->data);
+	r = sscanf(wacom->data, "~C%u,%u", &wacom->max_x, &wacom->max_y);
+	if (r != 2)
+		dev_warn(&wacom->dev->dev, "could not get max coordinates\n");
+}
+
+static void wacom_handle_response(struct wacom *wacom)
+{
+	if (wacom->data[0] != '~' || wacom->data[1] != wacom->expect) {
+		dev_err(&wacom->dev->dev,
+			"Wacom got an unexpected response: %s\n", wacom->data);
+		wacom->result = -EIO;
+	} else {
+		wacom->result = 0;
+
+		switch (wacom->data[1]) {
+		case '#':
+			wacom_handle_model_response(wacom);
+			break;
+		case 'R':
+			wacom_handle_configuration_response(wacom);
+			break;
+		case 'C':
+			wacom_handle_coordinates_response(wacom);
+			break;
+		}
+	}
+
+	complete(&wacom->cmd_done);
+}
+
+static void wacom_handle_packet(struct wacom *wacom)
+{
+	u8 in_proximity_p, stylus_p, button;
+	unsigned int tool;
+	int x, y, z;
+
+	in_proximity_p = wacom->data[0] & 0x40;
+	stylus_p = wacom->data[0] & 0x20;
+	button = (wacom->data[3] & 0x78) >> 3;
+	x = (wacom->data[0] & 3) << 14 | wacom->data[1]<<7 | wacom->data[2];
+	y = (wacom->data[3] & 3) << 14 | wacom->data[4]<<7 | wacom->data[5];
+
+	if (in_proximity_p && stylus_p) {
+		z = wacom->data[6] & 0x7f;
+		if (wacom->extra_z_bits >= 1)
+			z = z << 1 | (wacom->data[3] & 0x4) >> 2;
+		if (wacom->extra_z_bits > 1)
+			z = z << 1 | (wacom->data[0] & 0x4) >> 2;
+		z = z ^ (0x40 << wacom->extra_z_bits);
+	} else {
+		z = -1;
+	}
+
+	if (stylus_p)
+		tool = (button & wacom->eraser_mask) ? ERASER : STYLUS;
+	else
+		tool = CURSOR;
+
+	if (tool != wacom->tool && wacom->tool != 0) {
+		input_report_key(wacom->dev, tools[wacom->tool].input_id, 0);
+		input_sync(wacom->dev);
+	}
+	wacom->tool = tool;
+
+	input_report_key(wacom->dev, tools[tool].input_id, in_proximity_p);
+	input_report_abs(wacom->dev, ABS_MISC,
+			 in_proximity_p ? tools[tool].device_id : 0);
+	input_report_abs(wacom->dev, ABS_X, x);
+	input_report_abs(wacom->dev, ABS_Y, y);
+	input_report_abs(wacom->dev, ABS_PRESSURE, z);
+	if (stylus_p) {
+		input_report_key(wacom->dev, BTN_TOUCH, button & 1);
+		input_report_key(wacom->dev, BTN_STYLUS, button & 2);
+		input_report_key(wacom->dev, BTN_STYLUS2, button & 4);
+	} else {
+		input_report_key(wacom->dev, BTN_LEFT, button & 1);
+		input_report_key(wacom->dev, BTN_RIGHT, button & 2);
+		input_report_key(wacom->dev, BTN_MIDDLE, button & 4);
+		/* handle relative wheel for non-stylus device */
+		z = (wacom->data[6] & 0x30) >> 4;
+		if (wacom->data[6] & 0x40)
+			z = -z;
+		input_report_rel(wacom->dev, REL_WHEEL, z);
+	}
+	input_sync(wacom->dev);
+}
+
+static void wacom_clear_data_buf(struct wacom *wacom)
+{
+	memset(wacom->data, 0, DATA_SIZE);
+	wacom->idx = 0;
+}
+
+static irqreturn_t wacom_interrupt(struct serio *serio, unsigned char data,
+				   unsigned int flags)
+{
+	struct wacom *wacom = serio_get_drvdata(serio);
+
+	if (data & 0x80)
+		wacom->idx = 0;
+
+	/*
+	 * We're either expecting a carriage return-terminated ASCII
+	 * response string, or a seven-byte packet with the MSB set on
+	 * the first byte.
+	 *
+	 * Note however that some tablets (the PenPartner, for
+	 * example) don't send a carriage return at the end of a
+	 * command.  We handle these by waiting for timeout.
+	 */
+	if (data == '\r' && !(wacom->data[0] & 0x80)) {
+		wacom_handle_response(wacom);
+		wacom_clear_data_buf(wacom);
+		return IRQ_HANDLED;
+	}
+
+	/* Leave place for 0 termination */
+	if (wacom->idx > (DATA_SIZE - 2)) {
+		dev_dbg(&wacom->dev->dev,
+			"throwing away %d bytes of garbage\n", wacom->idx);
+		wacom_clear_data_buf(wacom);
+	}
+	wacom->data[wacom->idx++] = data;
+
+	if (wacom->idx == PACKET_LENGTH && (wacom->data[0] & 0x80)) {
+		wacom_handle_packet(wacom);
+		wacom_clear_data_buf(wacom);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static void wacom_disconnect(struct serio *serio)
+{
+	struct wacom *wacom = serio_get_drvdata(serio);
+
+	serio_close(serio);
+	serio_set_drvdata(serio, NULL);
+	input_unregister_device(wacom->dev);
+	kfree(wacom);
+}
+
+static int wacom_send(struct serio *serio, const u8 *command)
+{
+	int err = 0;
+
+	for (; !err && *command; command++)
+		err = serio_write(serio, *command);
+
+	return err;
+}
+
+static int wacom_send_setup_string(struct wacom *wacom, struct serio *serio)
+{
+	const u8 *cmd;
+
+	switch (wacom->dev->id.version) {
+	case MODEL_CINTIQ:	/* UNTESTED */
+		cmd = COMMAND_ORIGIN_IN_UPPER_LEFT
+			COMMAND_TRANSMIT_AT_MAX_RATE
+			COMMAND_ENABLE_CONTINUOUS_MODE
+			COMMAND_START_SENDING_PACKETS;
+		break;
+
+	case MODEL_PENPARTNER:
+		cmd = COMMAND_ENABLE_PRESSURE_MODE
+			COMMAND_START_SENDING_PACKETS;
+		break;
+
+	default:
+		cmd = COMMAND_MULTI_MODE_INPUT
+			COMMAND_ORIGIN_IN_UPPER_LEFT
+			COMMAND_ENABLE_ALL_MACRO_BUTTONS
+			COMMAND_DISABLE_GROUP_1_MACRO_BUTTONS
+			COMMAND_TRANSMIT_AT_MAX_RATE
+			COMMAND_DISABLE_INCREMENTAL_MODE
+			COMMAND_ENABLE_CONTINUOUS_MODE
+			COMMAND_Z_FILTER
+			COMMAND_START_SENDING_PACKETS;
+		break;
+	}
+
+	return wacom_send(serio, cmd);
+}
+
+static int wacom_send_and_wait(struct wacom *wacom, struct serio *serio,
+			       const u8 *cmd, const char *desc)
+{
+	int err;
+	unsigned long u;
+
+	wacom->expect = cmd[1];
+	init_completion(&wacom->cmd_done);
+
+	err = wacom_send(serio, cmd);
+	if (err)
+		return err;
+
+	u = wait_for_completion_timeout(&wacom->cmd_done, HZ);
+	if (u == 0) {
+		/* Timeout, process what we've received. */
+		wacom_handle_response(wacom);
+	}
+
+	wacom->expect = 0;
+	return wacom->result;
+}
+
+static int wacom_setup(struct wacom *wacom, struct serio *serio)
+{
+	int err;
+
+	/* Note that setting the link speed is the job of inputattach.
+	 * We assume that reset negotiation has already happened,
+	 * here. */
+	err = wacom_send_and_wait(wacom, serio, REQUEST_MODEL_AND_ROM_VERSION,
+				  "model and version");
+	if (err)
+		return err;
+
+	if (!(wacom->res_x && wacom->res_y)) {
+		err = wacom_send_and_wait(wacom, serio,
+					  REQUEST_CONFIGURATION_STRING,
+					  "configuration string");
+		if (err)
+			return err;
+	}
+
+	if (!(wacom->max_x && wacom->max_y)) {
+		err = wacom_send_and_wait(wacom, serio,
+					  REQUEST_MAX_COORDINATES,
+					  "coordinates string");
+		if (err)
+			return err;
+	}
+
+	return wacom_send_setup_string(wacom, serio);
+}
+
+static int wacom_connect(struct serio *serio, struct serio_driver *drv)
+{
+	struct wacom *wacom;
+	struct input_dev *input_dev;
+	int err = -ENOMEM;
+
+	wacom = kzalloc(sizeof(struct wacom), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!wacom || !input_dev)
+		goto free_device;
+
+	wacom->dev = input_dev;
+	wacom->extra_z_bits = 1;
+	wacom->eraser_mask = 0x04;
+	wacom->tool = wacom->idx = 0;
+	snprintf(wacom->phys, sizeof(wacom->phys), "%s/input0", serio->phys);
+	input_dev->phys = wacom->phys;
+	input_dev->id.bustype = BUS_RS232;
+	input_dev->id.vendor  = SERIO_WACOM_IV;
+	input_dev->id.product = serio->id.extra;
+	input_dev->dev.parent = &serio->dev;
+
+	input_dev->evbit[0] =
+		BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS) | BIT_MASK(EV_REL);
+	set_bit(ABS_MISC, input_dev->absbit);
+	set_bit(BTN_TOOL_PEN, input_dev->keybit);
+	set_bit(BTN_TOOL_RUBBER, input_dev->keybit);
+	set_bit(BTN_TOOL_MOUSE, input_dev->keybit);
+	set_bit(BTN_TOUCH, input_dev->keybit);
+	set_bit(BTN_STYLUS, input_dev->keybit);
+	set_bit(BTN_LEFT, input_dev->keybit);
+	set_bit(BTN_RIGHT, input_dev->keybit);
+	set_bit(BTN_MIDDLE, input_dev->keybit);
+
+	serio_set_drvdata(serio, wacom);
+
+	err = serio_open(serio, drv);
+	if (err)
+		goto free_device;
+
+	err = wacom_setup(wacom, serio);
+	if (err)
+		goto close_serio;
+
+	set_bit(INPUT_PROP_DIRECT, input_dev->propbit);
+	if (!(wacom->flags & F_COVERS_SCREEN))
+		__set_bit(INPUT_PROP_POINTER, input_dev->propbit);
+
+	if (wacom->flags & F_HAS_STYLUS2)
+		__set_bit(BTN_STYLUS2, input_dev->keybit);
+
+	if (wacom->flags & F_HAS_SCROLLWHEEL)
+		__set_bit(REL_WHEEL, input_dev->relbit);
+
+	input_abs_set_res(wacom->dev, ABS_X, wacom->res_x);
+	input_abs_set_res(wacom->dev, ABS_Y, wacom->res_y);
+	input_set_abs_params(wacom->dev, ABS_X, 0, wacom->max_x, 0, 0);
+	input_set_abs_params(wacom->dev, ABS_Y, 0, wacom->max_y, 0, 0);
+	input_set_abs_params(wacom->dev, ABS_PRESSURE, -1,
+			     (1 << (7 + wacom->extra_z_bits)) - 1, 0, 0);
+
+	err = input_register_device(wacom->dev);
+	if (err)
+		goto close_serio;
+
+	return 0;
+
+close_serio:
+	serio_close(serio);
+free_device:
+	serio_set_drvdata(serio, NULL);
+	input_free_device(input_dev);
+	kfree(wacom);
+	return err;
+}
+
+static struct serio_device_id wacom_serio_ids[] = {
+	{
+		.type	= SERIO_RS232,
+		.proto	= SERIO_WACOM_IV,
+		.id	= SERIO_ANY,
+		.extra	= SERIO_ANY,
+	},
+	{ 0 }
+};
+
+MODULE_DEVICE_TABLE(serio, wacom_serio_ids);
+
+static struct serio_driver wacom_drv = {
+	.driver		= {
+		.name	= "wacom_serial4",
+	},
+	.description	= "Wacom protocol 4 serial tablet driver",
+	.id_table	= wacom_serio_ids,
+	.interrupt	= wacom_interrupt,
+	.connect	= wacom_connect,
+	.disconnect	= wacom_disconnect,
+};
+
+module_serio_driver(wacom_drv);