summaryrefslogtreecommitdiff
path: root/drivers/input/tablet
diff options
context:
space:
mode:
authorAndré Fabian Silva Delgado <emulatorman@parabola.nu>2015-08-05 17:04:01 -0300
committerAndré Fabian Silva Delgado <emulatorman@parabola.nu>2015-08-05 17:04:01 -0300
commit57f0f512b273f60d52568b8c6b77e17f5636edc0 (patch)
tree5e910f0e82173f4ef4f51111366a3f1299037a7b /drivers/input/tablet
Initial import
Diffstat (limited to 'drivers/input/tablet')
-rw-r--r--drivers/input/tablet/Kconfig86
-rw-r--r--drivers/input/tablet/Makefile11
-rw-r--r--drivers/input/tablet/acecad.c278
-rw-r--r--drivers/input/tablet/aiptek.c1940
-rw-r--r--drivers/input/tablet/gtco.c1023
-rw-r--r--drivers/input/tablet/hanwang.c461
-rw-r--r--drivers/input/tablet/kbtab.c207
-rw-r--r--drivers/input/tablet/wacom_serial4.c620
8 files changed, 4626 insertions, 0 deletions
diff --git a/drivers/input/tablet/Kconfig b/drivers/input/tablet/Kconfig
new file mode 100644
index 000000000..623bb9e0d
--- /dev/null
+++ b/drivers/input/tablet/Kconfig
@@ -0,0 +1,86 @@
+#
+# Tablet driver configuration
+#
+menuconfig INPUT_TABLET
+ bool "Tablets"
+ help
+ Say Y here, and a list of supported tablets will be displayed.
+ This option doesn't affect the kernel.
+
+ If unsure, say Y.
+
+if INPUT_TABLET
+
+config TABLET_USB_ACECAD
+ tristate "Acecad Flair tablet support (USB)"
+ depends on USB_ARCH_HAS_HCD
+ select USB
+ help
+ Say Y here if you want to use the USB version of the Acecad Flair
+ tablet. Make sure to say Y to "Mouse support"
+ (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support"
+ (CONFIG_INPUT_EVDEV) as well.
+
+ To compile this driver as a module, choose M here: the
+ module will be called acecad.
+
+config TABLET_USB_AIPTEK
+ tristate "Aiptek 6000U/8000U and Genius G_PEN tablet support (USB)"
+ depends on USB_ARCH_HAS_HCD
+ select USB
+ help
+ Say Y here if you want to use the USB version of the Aiptek 6000U,
+ Aiptek 8000U or Genius G-PEN 560 tablet. Make sure to say Y to
+ "Mouse support" (CONFIG_INPUT_MOUSEDEV) and/or "Event interface
+ support" (CONFIG_INPUT_EVDEV) as well.
+
+ To compile this driver as a module, choose M here: the
+ module will be called aiptek.
+
+config TABLET_USB_GTCO
+ tristate "GTCO CalComp/InterWrite USB Support"
+ depends on USB && INPUT
+ help
+ Say Y here if you want to use the USB version of the GTCO
+ CalComp/InterWrite Tablet. Make sure to say Y to "Mouse support"
+ (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support"
+ (CONFIG_INPUT_EVDEV) as well.
+
+ To compile this driver as a module, choose M here: the
+ module will be called gtco.
+
+config TABLET_USB_HANWANG
+ tristate "Hanwang Art Master III tablet support (USB)"
+ depends on USB_ARCH_HAS_HCD
+ select USB
+ help
+ Say Y here if you want to use the USB version of the Hanwang Art
+ Master III tablet.
+
+ To compile this driver as a module, choose M here: the
+ module will be called hanwang.
+
+config TABLET_USB_KBTAB
+ tristate "KB Gear JamStudio tablet support (USB)"
+ depends on USB_ARCH_HAS_HCD
+ select USB
+ help
+ Say Y here if you want to use the USB version of the KB Gear
+ JamStudio tablet. Make sure to say Y to "Mouse support"
+ (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support"
+ (CONFIG_INPUT_EVDEV) as well.
+
+ To compile this driver as a module, choose M here: the
+ module will be called kbtab.
+
+config TABLET_SERIAL_WACOM4
+ tristate "Wacom protocol 4 serial tablet support"
+ select SERIO
+ help
+ Say Y here if you want to use Wacom protocol 4 serial tablets.
+ E.g. serial versions of the Cintiq, Graphire or Penpartner.
+
+ To compile this driver as a module, choose M here: the
+ module will be called wacom_serial4.
+
+endif
diff --git a/drivers/input/tablet/Makefile b/drivers/input/tablet/Makefile
new file mode 100644
index 000000000..2e130101c
--- /dev/null
+++ b/drivers/input/tablet/Makefile
@@ -0,0 +1,11 @@
+#
+# Makefile for the tablet drivers
+#
+
+
+obj-$(CONFIG_TABLET_USB_ACECAD) += acecad.o
+obj-$(CONFIG_TABLET_USB_AIPTEK) += aiptek.o
+obj-$(CONFIG_TABLET_USB_GTCO) += gtco.o
+obj-$(CONFIG_TABLET_USB_HANWANG) += hanwang.o
+obj-$(CONFIG_TABLET_USB_KBTAB) += kbtab.o
+obj-$(CONFIG_TABLET_SERIAL_WACOM4) += wacom_serial4.o
diff --git a/drivers/input/tablet/acecad.c b/drivers/input/tablet/acecad.c
new file mode 100644
index 000000000..889f6b77e
--- /dev/null
+++ b/drivers/input/tablet/acecad.c
@@ -0,0 +1,278 @@
+/*
+ * Copyright (c) 2001-2005 Edouard TISSERANT <edouard.tisserant@wanadoo.fr>
+ * Copyright (c) 2004-2005 Stephane VOLTZ <svoltz@numericable.fr>
+ *
+ * USB Acecad "Acecad Flair" tablet support
+ *
+ * Changelog:
+ * v3.2 - Added sysfs support
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/usb/input.h>
+
+/*
+ * Version Information
+ */
+#define DRIVER_VERSION "v3.2"
+#define DRIVER_DESC "USB Acecad Flair tablet driver"
+#define DRIVER_LICENSE "GPL"
+#define DRIVER_AUTHOR "Edouard TISSERANT <edouard.tisserant@wanadoo.fr>"
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE(DRIVER_LICENSE);
+
+#define USB_VENDOR_ID_ACECAD 0x0460
+#define USB_DEVICE_ID_FLAIR 0x0004
+#define USB_DEVICE_ID_302 0x0008
+
+struct usb_acecad {
+ char name[128];
+ char phys[64];
+ struct usb_device *usbdev;
+ struct usb_interface *intf;
+ struct input_dev *input;
+ struct urb *irq;
+
+ unsigned char *data;
+ dma_addr_t data_dma;
+};
+
+static void usb_acecad_irq(struct urb *urb)
+{
+ struct usb_acecad *acecad = urb->context;
+ unsigned char *data = acecad->data;
+ struct input_dev *dev = acecad->input;
+ struct usb_interface *intf = acecad->intf;
+ int prox, status;
+
+ switch (urb->status) {
+ case 0:
+ /* success */
+ break;
+ case -ECONNRESET:
+ case -ENOENT:
+ case -ESHUTDOWN:
+ /* this urb is terminated, clean up */
+ dev_dbg(&intf->dev, "%s - urb shutting down with status: %d\n",
+ __func__, urb->status);
+ return;
+ default:
+ dev_dbg(&intf->dev, "%s - nonzero urb status received: %d\n",
+ __func__, urb->status);
+ goto resubmit;
+ }
+
+ prox = (data[0] & 0x04) >> 2;
+ input_report_key(dev, BTN_TOOL_PEN, prox);
+
+ if (prox) {
+ int x = data[1] | (data[2] << 8);
+ int y = data[3] | (data[4] << 8);
+ /* Pressure should compute the same way for flair and 302 */
+ int pressure = data[5] | (data[6] << 8);
+ int touch = data[0] & 0x01;
+ int stylus = (data[0] & 0x10) >> 4;
+ int stylus2 = (data[0] & 0x20) >> 5;
+ input_report_abs(dev, ABS_X, x);
+ input_report_abs(dev, ABS_Y, y);
+ input_report_abs(dev, ABS_PRESSURE, pressure);
+ input_report_key(dev, BTN_TOUCH, touch);
+ input_report_key(dev, BTN_STYLUS, stylus);
+ input_report_key(dev, BTN_STYLUS2, stylus2);
+ }
+
+ /* event termination */
+ input_sync(dev);
+
+resubmit:
+ status = usb_submit_urb(urb, GFP_ATOMIC);
+ if (status)
+ dev_err(&intf->dev,
+ "can't resubmit intr, %s-%s/input0, status %d\n",
+ acecad->usbdev->bus->bus_name,
+ acecad->usbdev->devpath, status);
+}
+
+static int usb_acecad_open(struct input_dev *dev)
+{
+ struct usb_acecad *acecad = input_get_drvdata(dev);
+
+ acecad->irq->dev = acecad->usbdev;
+ if (usb_submit_urb(acecad->irq, GFP_KERNEL))
+ return -EIO;
+
+ return 0;
+}
+
+static void usb_acecad_close(struct input_dev *dev)
+{
+ struct usb_acecad *acecad = input_get_drvdata(dev);
+
+ usb_kill_urb(acecad->irq);
+}
+
+static int usb_acecad_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+ struct usb_device *dev = interface_to_usbdev(intf);
+ struct usb_host_interface *interface = intf->cur_altsetting;
+ struct usb_endpoint_descriptor *endpoint;
+ struct usb_acecad *acecad;
+ struct input_dev *input_dev;
+ int pipe, maxp;
+ int err;
+
+ if (interface->desc.bNumEndpoints != 1)
+ return -ENODEV;
+
+ endpoint = &interface->endpoint[0].desc;
+
+ if (!usb_endpoint_is_int_in(endpoint))
+ return -ENODEV;
+
+ pipe = usb_rcvintpipe(dev, endpoint->bEndpointAddress);
+ maxp = usb_maxpacket(dev, pipe, usb_pipeout(pipe));
+
+ acecad = kzalloc(sizeof(struct usb_acecad), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!acecad || !input_dev) {
+ err = -ENOMEM;
+ goto fail1;
+ }
+
+ acecad->data = usb_alloc_coherent(dev, 8, GFP_KERNEL, &acecad->data_dma);
+ if (!acecad->data) {
+ err= -ENOMEM;
+ goto fail1;
+ }
+
+ acecad->irq = usb_alloc_urb(0, GFP_KERNEL);
+ if (!acecad->irq) {
+ err = -ENOMEM;
+ goto fail2;
+ }
+
+ acecad->usbdev = dev;
+ acecad->intf = intf;
+ acecad->input = input_dev;
+
+ if (dev->manufacturer)
+ strlcpy(acecad->name, dev->manufacturer, sizeof(acecad->name));
+
+ if (dev->product) {
+ if (dev->manufacturer)
+ strlcat(acecad->name, " ", sizeof(acecad->name));
+ strlcat(acecad->name, dev->product, sizeof(acecad->name));
+ }
+
+ usb_make_path(dev, acecad->phys, sizeof(acecad->phys));
+ strlcat(acecad->phys, "/input0", sizeof(acecad->phys));
+
+ input_dev->name = acecad->name;
+ input_dev->phys = acecad->phys;
+ usb_to_input_id(dev, &input_dev->id);
+ input_dev->dev.parent = &intf->dev;
+
+ input_set_drvdata(input_dev, acecad);
+
+ input_dev->open = usb_acecad_open;
+ input_dev->close = usb_acecad_close;
+
+ input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+ input_dev->keybit[BIT_WORD(BTN_DIGI)] = BIT_MASK(BTN_TOOL_PEN) |
+ BIT_MASK(BTN_TOUCH) | BIT_MASK(BTN_STYLUS) |
+ BIT_MASK(BTN_STYLUS2);
+
+ switch (id->driver_info) {
+ case 0:
+ input_set_abs_params(input_dev, ABS_X, 0, 5000, 4, 0);
+ input_set_abs_params(input_dev, ABS_Y, 0, 3750, 4, 0);
+ input_set_abs_params(input_dev, ABS_PRESSURE, 0, 512, 0, 0);
+ if (!strlen(acecad->name))
+ snprintf(acecad->name, sizeof(acecad->name),
+ "USB Acecad Flair Tablet %04x:%04x",
+ le16_to_cpu(dev->descriptor.idVendor),
+ le16_to_cpu(dev->descriptor.idProduct));
+ break;
+
+ case 1:
+ input_set_abs_params(input_dev, ABS_X, 0, 53000, 4, 0);
+ input_set_abs_params(input_dev, ABS_Y, 0, 2250, 4, 0);
+ input_set_abs_params(input_dev, ABS_PRESSURE, 0, 1024, 0, 0);
+ if (!strlen(acecad->name))
+ snprintf(acecad->name, sizeof(acecad->name),
+ "USB Acecad 302 Tablet %04x:%04x",
+ le16_to_cpu(dev->descriptor.idVendor),
+ le16_to_cpu(dev->descriptor.idProduct));
+ break;
+ }
+
+ usb_fill_int_urb(acecad->irq, dev, pipe,
+ acecad->data, maxp > 8 ? 8 : maxp,
+ usb_acecad_irq, acecad, endpoint->bInterval);
+ acecad->irq->transfer_dma = acecad->data_dma;
+ acecad->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+ err = input_register_device(acecad->input);
+ if (err)
+ goto fail3;
+
+ usb_set_intfdata(intf, acecad);
+
+ return 0;
+
+ fail3: usb_free_urb(acecad->irq);
+ fail2: usb_free_coherent(dev, 8, acecad->data, acecad->data_dma);
+ fail1: input_free_device(input_dev);
+ kfree(acecad);
+ return err;
+}
+
+static void usb_acecad_disconnect(struct usb_interface *intf)
+{
+ struct usb_acecad *acecad = usb_get_intfdata(intf);
+
+ usb_set_intfdata(intf, NULL);
+
+ input_unregister_device(acecad->input);
+ usb_free_urb(acecad->irq);
+ usb_free_coherent(acecad->usbdev, 8, acecad->data, acecad->data_dma);
+ kfree(acecad);
+}
+
+static struct usb_device_id usb_acecad_id_table [] = {
+ { USB_DEVICE(USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_FLAIR), .driver_info = 0 },
+ { USB_DEVICE(USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_302), .driver_info = 1 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(usb, usb_acecad_id_table);
+
+static struct usb_driver usb_acecad_driver = {
+ .name = "usb_acecad",
+ .probe = usb_acecad_probe,
+ .disconnect = usb_acecad_disconnect,
+ .id_table = usb_acecad_id_table,
+};
+
+module_usb_driver(usb_acecad_driver);
diff --git a/drivers/input/tablet/aiptek.c b/drivers/input/tablet/aiptek.c
new file mode 100644
index 000000000..e7f966da6
--- /dev/null
+++ b/drivers/input/tablet/aiptek.c
@@ -0,0 +1,1940 @@
+/*
+ * Native support for the Aiptek HyperPen USB Tablets
+ * (4000U/5000U/6000U/8000U/12000U)
+ *
+ * Copyright (c) 2001 Chris Atenasio <chris@crud.net>
+ * Copyright (c) 2002-2004 Bryan W. Headley <bwheadley@earthlink.net>
+ *
+ * based on wacom.c by
+ * Vojtech Pavlik <vojtech@suse.cz>
+ * Andreas Bach Aaen <abach@stofanet.dk>
+ * Clifford Wolf <clifford@clifford.at>
+ * Sam Mosel <sam.mosel@computer.org>
+ * James E. Blair <corvus@gnu.org>
+ * Daniel Egger <egger@suse.de>
+ *
+ * Many thanks to Oliver Kuechemann for his support.
+ *
+ * ChangeLog:
+ * v0.1 - Initial release
+ * v0.2 - Hack to get around fake event 28's. (Bryan W. Headley)
+ * v0.3 - Make URB dynamic (Bryan W. Headley, Jun-8-2002)
+ * Released to Linux 2.4.19 and 2.5.x
+ * v0.4 - Rewrote substantial portions of the code to deal with
+ * corrected control sequences, timing, dynamic configuration,
+ * support of 6000U - 12000U, procfs, and macro key support
+ * (Jan-1-2003 - Feb-5-2003, Bryan W. Headley)
+ * v1.0 - Added support for diagnostic messages, count of messages
+ * received from URB - Mar-8-2003, Bryan W. Headley
+ * v1.1 - added support for tablet resolution, changed DV and proximity
+ * some corrections - Jun-22-2003, martin schneebacher
+ * - Added support for the sysfs interface, deprecating the
+ * procfs interface for 2.5.x kernel. Also added support for
+ * Wheel command. Bryan W. Headley July-15-2003.
+ * v1.2 - Reworked jitter timer as a kernel thread.
+ * Bryan W. Headley November-28-2003/Jan-10-2004.
+ * v1.3 - Repaired issue of kernel thread going nuts on single-processor
+ * machines, introduced programmableDelay as a command line
+ * parameter. Feb 7 2004, Bryan W. Headley.
+ * v1.4 - Re-wire jitter so it does not require a thread. Courtesy of
+ * Rene van Paassen. Added reporting of physical pointer device
+ * (e.g., stylus, mouse in reports 2, 3, 4, 5. We don't know
+ * for reports 1, 6.)
+ * what physical device reports for reports 1, 6.) Also enabled
+ * MOUSE and LENS tool button modes. Renamed "rubber" to "eraser".
+ * Feb 20, 2004, Bryan W. Headley.
+ * v1.5 - Added previousJitterable, so we don't do jitter delay when the
+ * user is holding a button down for periods of time.
+ *
+ * NOTE:
+ * This kernel driver is augmented by the "Aiptek" XFree86 input
+ * driver for your X server, as well as the Gaiptek GUI Front-end
+ * "Tablet Manager".
+ * These three products are highly interactive with one another,
+ * so therefore it's easier to document them all as one subsystem.
+ * Please visit the project's "home page", located at,
+ * http://aiptektablet.sourceforge.net.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/usb/input.h>
+#include <asm/uaccess.h>
+#include <asm/unaligned.h>
+
+/*
+ * Version Information
+ */
+#define DRIVER_VERSION "v2.3 (May 2, 2007)"
+#define DRIVER_AUTHOR "Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen"
+#define DRIVER_DESC "Aiptek HyperPen USB Tablet Driver (Linux 2.6.x)"
+
+/*
+ * Aiptek status packet:
+ *
+ * (returned as Report 1 - relative coordinates from mouse and stylus)
+ *
+ * bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0
+ * byte0 0 0 0 0 0 0 0 1
+ * byte1 0 0 0 0 0 BS2 BS Tip
+ * byte2 X7 X6 X5 X4 X3 X2 X1 X0
+ * byte3 Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0
+ *
+ * (returned as Report 2 - absolute coordinates from the stylus)
+ *
+ * bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0
+ * byte0 0 0 0 0 0 0 1 0
+ * byte1 X7 X6 X5 X4 X3 X2 X1 X0
+ * byte2 X15 X14 X13 X12 X11 X10 X9 X8
+ * byte3 Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0
+ * byte4 Y15 Y14 Y13 Y12 Y11 Y10 Y9 Y8
+ * byte5 * * * BS2 BS1 Tip IR DV
+ * byte6 P7 P6 P5 P4 P3 P2 P1 P0
+ * byte7 P15 P14 P13 P12 P11 P10 P9 P8
+ *
+ * (returned as Report 3 - absolute coordinates from the mouse)
+ *
+ * bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0
+ * byte0 0 0 0 0 0 0 1 1
+ * byte1 X7 X6 X5 X4 X3 X2 X1 X0
+ * byte2 X15 X14 X13 X12 X11 X10 X9 X8
+ * byte3 Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0
+ * byte4 Y15 Y14 Y13 Y12 Y11 Y10 Y9 Y8
+ * byte5 * * * BS2 BS1 Tip IR DV
+ * byte6 P7 P6 P5 P4 P3 P2 P1 P0
+ * byte7 P15 P14 P13 P12 P11 P10 P9 P8
+ *
+ * (returned as Report 4 - macrokeys from the stylus)
+ *
+ * bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0
+ * byte0 0 0 0 0 0 1 0 0
+ * byte1 0 0 0 BS2 BS Tip IR DV
+ * byte2 0 0 0 0 0 0 1 0
+ * byte3 0 0 0 K4 K3 K2 K1 K0
+ * byte4 P7 P6 P5 P4 P3 P2 P1 P0
+ * byte5 P15 P14 P13 P12 P11 P10 P9 P8
+ *
+ * (returned as Report 5 - macrokeys from the mouse)
+ *
+ * bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0
+ * byte0 0 0 0 0 0 1 0 1
+ * byte1 0 0 0 BS2 BS Tip IR DV
+ * byte2 0 0 0 0 0 0 1 0
+ * byte3 0 0 0 K4 K3 K2 K1 K0
+ * byte4 P7 P6 P5 P4 P3 P2 P1 P0
+ * byte5 P15 P14 P13 P12 P11 P10 P9 P8
+ *
+ * IR: In Range = Proximity on
+ * DV = Data Valid
+ * BS = Barrel Switch (as in, macro keys)
+ * BS2 also referred to as Tablet Pick
+ *
+ * Command Summary:
+ *
+ * Use report_type CONTROL (3)
+ * Use report_id 2
+ *
+ * Command/Data Description Return Bytes Return Value
+ * 0x10/0x00 SwitchToMouse 0
+ * 0x10/0x01 SwitchToTablet 0
+ * 0x18/0x04 SetResolution 0
+ * 0x12/0xFF AutoGainOn 0
+ * 0x17/0x00 FilterOn 0
+ * 0x01/0x00 GetXExtension 2 MaxX
+ * 0x01/0x01 GetYExtension 2 MaxY
+ * 0x02/0x00 GetModelCode 2 ModelCode = LOBYTE
+ * 0x03/0x00 GetODMCode 2 ODMCode
+ * 0x08/0x00 GetPressureLevels 2 =512
+ * 0x04/0x00 GetFirmwareVersion 2 Firmware Version
+ * 0x11/0x02 EnableMacroKeys 0
+ *
+ * To initialize the tablet:
+ *
+ * (1) Send Resolution500LPI (Command)
+ * (2) Query for Model code (Option Report)
+ * (3) Query for ODM code (Option Report)
+ * (4) Query for firmware (Option Report)
+ * (5) Query for GetXExtension (Option Report)
+ * (6) Query for GetYExtension (Option Report)
+ * (7) Query for GetPressureLevels (Option Report)
+ * (8) SwitchToTablet for Absolute coordinates, or
+ * SwitchToMouse for Relative coordinates (Command)
+ * (9) EnableMacroKeys (Command)
+ * (10) FilterOn (Command)
+ * (11) AutoGainOn (Command)
+ *
+ * (Step 9 can be omitted, but you'll then have no function keys.)
+ */
+
+#define USB_VENDOR_ID_AIPTEK 0x08ca
+#define USB_VENDOR_ID_KYE 0x0458
+#define USB_REQ_GET_REPORT 0x01
+#define USB_REQ_SET_REPORT 0x09
+
+ /* PointerMode codes
+ */
+#define AIPTEK_POINTER_ONLY_MOUSE_MODE 0
+#define AIPTEK_POINTER_ONLY_STYLUS_MODE 1
+#define AIPTEK_POINTER_EITHER_MODE 2
+
+#define AIPTEK_POINTER_ALLOW_MOUSE_MODE(a) \
+ (a == AIPTEK_POINTER_ONLY_MOUSE_MODE || \
+ a == AIPTEK_POINTER_EITHER_MODE)
+#define AIPTEK_POINTER_ALLOW_STYLUS_MODE(a) \
+ (a == AIPTEK_POINTER_ONLY_STYLUS_MODE || \
+ a == AIPTEK_POINTER_EITHER_MODE)
+
+ /* CoordinateMode code
+ */
+#define AIPTEK_COORDINATE_RELATIVE_MODE 0
+#define AIPTEK_COORDINATE_ABSOLUTE_MODE 1
+
+ /* XTilt and YTilt values
+ */
+#define AIPTEK_TILT_MIN (-128)
+#define AIPTEK_TILT_MAX 127
+#define AIPTEK_TILT_DISABLE (-10101)
+
+ /* Wheel values
+ */
+#define AIPTEK_WHEEL_MIN 0
+#define AIPTEK_WHEEL_MAX 1024
+#define AIPTEK_WHEEL_DISABLE (-10101)
+
+ /* ToolCode values, which BTW are 0x140 .. 0x14f
+ * We have things set up such that if the tool button has changed,
+ * the tools get reset.
+ */
+ /* toolMode codes
+ */
+#define AIPTEK_TOOL_BUTTON_PEN_MODE BTN_TOOL_PEN
+#define AIPTEK_TOOL_BUTTON_PENCIL_MODE BTN_TOOL_PENCIL
+#define AIPTEK_TOOL_BUTTON_BRUSH_MODE BTN_TOOL_BRUSH
+#define AIPTEK_TOOL_BUTTON_AIRBRUSH_MODE BTN_TOOL_AIRBRUSH
+#define AIPTEK_TOOL_BUTTON_ERASER_MODE BTN_TOOL_RUBBER
+#define AIPTEK_TOOL_BUTTON_MOUSE_MODE BTN_TOOL_MOUSE
+#define AIPTEK_TOOL_BUTTON_LENS_MODE BTN_TOOL_LENS
+
+ /* Diagnostic message codes
+ */
+#define AIPTEK_DIAGNOSTIC_NA 0
+#define AIPTEK_DIAGNOSTIC_SENDING_RELATIVE_IN_ABSOLUTE 1
+#define AIPTEK_DIAGNOSTIC_SENDING_ABSOLUTE_IN_RELATIVE 2
+#define AIPTEK_DIAGNOSTIC_TOOL_DISALLOWED 3
+
+ /* Time to wait (in ms) to help mask hand jittering
+ * when pressing the stylus buttons.
+ */
+#define AIPTEK_JITTER_DELAY_DEFAULT 50
+
+ /* Time to wait (in ms) in-between sending the tablet
+ * a command and beginning the process of reading the return
+ * sequence from the tablet.
+ */
+#define AIPTEK_PROGRAMMABLE_DELAY_25 25
+#define AIPTEK_PROGRAMMABLE_DELAY_50 50
+#define AIPTEK_PROGRAMMABLE_DELAY_100 100
+#define AIPTEK_PROGRAMMABLE_DELAY_200 200
+#define AIPTEK_PROGRAMMABLE_DELAY_300 300
+#define AIPTEK_PROGRAMMABLE_DELAY_400 400
+#define AIPTEK_PROGRAMMABLE_DELAY_DEFAULT AIPTEK_PROGRAMMABLE_DELAY_400
+
+ /* Mouse button programming
+ */
+#define AIPTEK_MOUSE_LEFT_BUTTON 0x04
+#define AIPTEK_MOUSE_RIGHT_BUTTON 0x08
+#define AIPTEK_MOUSE_MIDDLE_BUTTON 0x10
+
+ /* Stylus button programming
+ */
+#define AIPTEK_STYLUS_LOWER_BUTTON 0x08
+#define AIPTEK_STYLUS_UPPER_BUTTON 0x10
+
+ /* Length of incoming packet from the tablet
+ */
+#define AIPTEK_PACKET_LENGTH 8
+
+ /* We report in EV_MISC both the proximity and
+ * whether the report came from the stylus, tablet mouse
+ * or "unknown" -- Unknown when the tablet is in relative
+ * mode, because we only get report 1's.
+ */
+#define AIPTEK_REPORT_TOOL_UNKNOWN 0x10
+#define AIPTEK_REPORT_TOOL_STYLUS 0x20
+#define AIPTEK_REPORT_TOOL_MOUSE 0x40
+
+static int programmableDelay = AIPTEK_PROGRAMMABLE_DELAY_DEFAULT;
+static int jitterDelay = AIPTEK_JITTER_DELAY_DEFAULT;
+
+struct aiptek_features {
+ int odmCode; /* Tablet manufacturer code */
+ int modelCode; /* Tablet model code (not unique) */
+ int firmwareCode; /* prom/eeprom version */
+ char usbPath[64 + 1]; /* device's physical usb path */
+};
+
+struct aiptek_settings {
+ int pointerMode; /* stylus-, mouse-only or either */
+ int coordinateMode; /* absolute/relative coords */
+ int toolMode; /* pen, pencil, brush, etc. tool */
+ int xTilt; /* synthetic xTilt amount */
+ int yTilt; /* synthetic yTilt amount */
+ int wheel; /* synthetic wheel amount */
+ int stylusButtonUpper; /* stylus upper btn delivers... */
+ int stylusButtonLower; /* stylus lower btn delivers... */
+ int mouseButtonLeft; /* mouse left btn delivers... */
+ int mouseButtonMiddle; /* mouse middle btn delivers... */
+ int mouseButtonRight; /* mouse right btn delivers... */
+ int programmableDelay; /* delay for tablet programming */
+ int jitterDelay; /* delay for hand jittering */
+};
+
+struct aiptek {
+ struct input_dev *inputdev; /* input device struct */
+ struct usb_device *usbdev; /* usb device struct */
+ struct usb_interface *intf; /* usb interface struct */
+ struct urb *urb; /* urb for incoming reports */
+ dma_addr_t data_dma; /* our dma stuffage */
+ struct aiptek_features features; /* tablet's array of features */
+ struct aiptek_settings curSetting; /* tablet's current programmable */
+ struct aiptek_settings newSetting; /* ... and new param settings */
+ unsigned int ifnum; /* interface number for IO */
+ int diagnostic; /* tablet diagnostic codes */
+ unsigned long eventCount; /* event count */
+ int inDelay; /* jitter: in jitter delay? */
+ unsigned long endDelay; /* jitter: time when delay ends */
+ int previousJitterable; /* jitterable prev value */
+
+ int lastMacro; /* macro key to reset */
+ int previousToolMode; /* pen, pencil, brush, etc. tool */
+ unsigned char *data; /* incoming packet data */
+};
+
+static const int eventTypes[] = {
+ EV_KEY, EV_ABS, EV_REL, EV_MSC,
+};
+
+static const int absEvents[] = {
+ ABS_X, ABS_Y, ABS_PRESSURE, ABS_TILT_X, ABS_TILT_Y,
+ ABS_WHEEL, ABS_MISC,
+};
+
+static const int relEvents[] = {
+ REL_X, REL_Y, REL_WHEEL,
+};
+
+static const int buttonEvents[] = {
+ BTN_LEFT, BTN_RIGHT, BTN_MIDDLE,
+ BTN_TOOL_PEN, BTN_TOOL_RUBBER, BTN_TOOL_PENCIL, BTN_TOOL_AIRBRUSH,
+ BTN_TOOL_BRUSH, BTN_TOOL_MOUSE, BTN_TOOL_LENS, BTN_TOUCH,
+ BTN_STYLUS, BTN_STYLUS2,
+};
+
+/*
+ * Permit easy lookup of keyboard events to send, versus
+ * the bitmap which comes from the tablet. This hides the
+ * issue that the F_keys are not sequentially numbered.
+ */
+static const int macroKeyEvents[] = {
+ KEY_ESC, KEY_F1, KEY_F2, KEY_F3, KEY_F4, KEY_F5,
+ KEY_F6, KEY_F7, KEY_F8, KEY_F9, KEY_F10, KEY_F11,
+ KEY_F12, KEY_F13, KEY_F14, KEY_F15, KEY_F16, KEY_F17,
+ KEY_F18, KEY_F19, KEY_F20, KEY_F21, KEY_F22, KEY_F23,
+ KEY_F24, KEY_STOP, KEY_AGAIN, KEY_PROPS, KEY_UNDO,
+ KEY_FRONT, KEY_COPY, KEY_OPEN, KEY_PASTE, 0
+};
+
+/***********************************************************************
+ * Map values to strings and back. Every map should have the following
+ * as its last element: { NULL, AIPTEK_INVALID_VALUE }.
+ */
+#define AIPTEK_INVALID_VALUE -1
+
+struct aiptek_map {
+ const char *string;
+ int value;
+};
+
+static int map_str_to_val(const struct aiptek_map *map, const char *str, size_t count)
+{
+ const struct aiptek_map *p;
+
+ if (str[count - 1] == '\n')
+ count--;
+
+ for (p = map; p->string; p++)
+ if (!strncmp(str, p->string, count))
+ return p->value;
+
+ return AIPTEK_INVALID_VALUE;
+}
+
+static const char *map_val_to_str(const struct aiptek_map *map, int val)
+{
+ const struct aiptek_map *p;
+
+ for (p = map; p->value != AIPTEK_INVALID_VALUE; p++)
+ if (val == p->value)
+ return p->string;
+
+ return "unknown";
+}
+
+/***********************************************************************
+ * aiptek_irq can receive one of six potential reports.
+ * The documentation for each is in the body of the function.
+ *
+ * The tablet reports on several attributes per invocation of
+ * aiptek_irq. Because the Linux Input Event system allows the
+ * transmission of ONE attribute per input_report_xxx() call,
+ * collation has to be done on the other end to reconstitute
+ * a complete tablet report. Further, the number of Input Event reports
+ * submitted varies, depending on what USB report type, and circumstance.
+ * To deal with this, EV_MSC is used to indicate an 'end-of-report'
+ * message. This has been an undocumented convention understood by the kernel
+ * tablet driver and clients such as gpm and XFree86's tablet drivers.
+ *
+ * Of the information received from the tablet, the one piece I
+ * cannot transmit is the proximity bit (without resorting to an EV_MSC
+ * convention above.) I therefore have taken over REL_MISC and ABS_MISC
+ * (for relative and absolute reports, respectively) for communicating
+ * Proximity. Why two events? I thought it interesting to know if the
+ * Proximity event occurred while the tablet was in absolute or relative
+ * mode.
+ * Update: REL_MISC proved not to be such a good idea. With REL_MISC you
+ * get an event transmitted each time. ABS_MISC works better, since it
+ * can be set and re-set. Thus, only using ABS_MISC from now on.
+ *
+ * Other tablets use the notion of a certain minimum stylus pressure
+ * to infer proximity. While that could have been done, that is yet
+ * another 'by convention' behavior, the documentation for which
+ * would be spread between two (or more) pieces of software.
+ *
+ * EV_MSC usage was terminated for this purpose in Linux 2.5.x, and
+ * replaced with the input_sync() method (which emits EV_SYN.)
+ */
+
+static void aiptek_irq(struct urb *urb)
+{
+ struct aiptek *aiptek = urb->context;
+ unsigned char *data = aiptek->data;
+ struct input_dev *inputdev = aiptek->inputdev;
+ struct usb_interface *intf = aiptek->intf;
+ int jitterable = 0;
+ int retval, macro, x, y, z, left, right, middle, p, dv, tip, bs, pck;
+
+ switch (urb->status) {
+ case 0:
+ /* Success */
+ break;
+
+ case -ECONNRESET:
+ case -ENOENT:
+ case -ESHUTDOWN:
+ /* This urb is terminated, clean up */
+ dev_dbg(&intf->dev, "%s - urb shutting down with status: %d\n",
+ __func__, urb->status);
+ return;
+
+ default:
+ dev_dbg(&intf->dev, "%s - nonzero urb status received: %d\n",
+ __func__, urb->status);
+ goto exit;
+ }
+
+ /* See if we are in a delay loop -- throw out report if true.
+ */
+ if (aiptek->inDelay == 1 && time_after(aiptek->endDelay, jiffies)) {
+ goto exit;
+ }
+
+ aiptek->inDelay = 0;
+ aiptek->eventCount++;
+
+ /* Report 1 delivers relative coordinates with either a stylus
+ * or the mouse. You do not know, however, which input
+ * tool generated the event.
+ */
+ if (data[0] == 1) {
+ if (aiptek->curSetting.coordinateMode ==
+ AIPTEK_COORDINATE_ABSOLUTE_MODE) {
+ aiptek->diagnostic =
+ AIPTEK_DIAGNOSTIC_SENDING_RELATIVE_IN_ABSOLUTE;
+ } else {
+ x = (signed char) data[2];
+ y = (signed char) data[3];
+
+ /* jitterable keeps track of whether any button has been pressed.
+ * We're also using it to remap the physical mouse button mask
+ * to pseudo-settings. (We don't specifically care about it's
+ * value after moving/transposing mouse button bitmasks, except
+ * that a non-zero value indicates that one or more
+ * mouse button was pressed.)
+ */
+ jitterable = data[1] & 0x07;
+
+ left = (data[1] & aiptek->curSetting.mouseButtonLeft >> 2) != 0 ? 1 : 0;
+ right = (data[1] & aiptek->curSetting.mouseButtonRight >> 2) != 0 ? 1 : 0;
+ middle = (data[1] & aiptek->curSetting.mouseButtonMiddle >> 2) != 0 ? 1 : 0;
+
+ input_report_key(inputdev, BTN_LEFT, left);
+ input_report_key(inputdev, BTN_MIDDLE, middle);
+ input_report_key(inputdev, BTN_RIGHT, right);
+
+ input_report_abs(inputdev, ABS_MISC,
+ 1 | AIPTEK_REPORT_TOOL_UNKNOWN);
+ input_report_rel(inputdev, REL_X, x);
+ input_report_rel(inputdev, REL_Y, y);
+
+ /* Wheel support is in the form of a single-event
+ * firing.
+ */
+ if (aiptek->curSetting.wheel != AIPTEK_WHEEL_DISABLE) {
+ input_report_rel(inputdev, REL_WHEEL,
+ aiptek->curSetting.wheel);
+ aiptek->curSetting.wheel = AIPTEK_WHEEL_DISABLE;
+ }
+ if (aiptek->lastMacro != -1) {
+ input_report_key(inputdev,
+ macroKeyEvents[aiptek->lastMacro], 0);
+ aiptek->lastMacro = -1;
+ }
+ input_sync(inputdev);
+ }
+ }
+ /* Report 2 is delivered only by the stylus, and delivers
+ * absolute coordinates.
+ */
+ else if (data[0] == 2) {
+ if (aiptek->curSetting.coordinateMode == AIPTEK_COORDINATE_RELATIVE_MODE) {
+ aiptek->diagnostic = AIPTEK_DIAGNOSTIC_SENDING_ABSOLUTE_IN_RELATIVE;
+ } else if (!AIPTEK_POINTER_ALLOW_STYLUS_MODE
+ (aiptek->curSetting.pointerMode)) {
+ aiptek->diagnostic = AIPTEK_DIAGNOSTIC_TOOL_DISALLOWED;
+ } else {
+ x = get_unaligned_le16(data + 1);
+ y = get_unaligned_le16(data + 3);
+ z = get_unaligned_le16(data + 6);
+
+ dv = (data[5] & 0x01) != 0 ? 1 : 0;
+ p = (data[5] & 0x02) != 0 ? 1 : 0;
+ tip = (data[5] & 0x04) != 0 ? 1 : 0;
+
+ /* Use jitterable to re-arrange button masks
+ */
+ jitterable = data[5] & 0x18;
+
+ bs = (data[5] & aiptek->curSetting.stylusButtonLower) != 0 ? 1 : 0;
+ pck = (data[5] & aiptek->curSetting.stylusButtonUpper) != 0 ? 1 : 0;
+
+ /* dv indicates 'data valid' (e.g., the tablet is in sync
+ * and has delivered a "correct" report) We will ignore
+ * all 'bad' reports...
+ */
+ if (dv != 0) {
+ /* If the selected tool changed, reset the old
+ * tool key, and set the new one.
+ */
+ if (aiptek->previousToolMode !=
+ aiptek->curSetting.toolMode) {
+ input_report_key(inputdev,
+ aiptek->previousToolMode, 0);
+ input_report_key(inputdev,
+ aiptek->curSetting.toolMode,
+ 1);
+ aiptek->previousToolMode =
+ aiptek->curSetting.toolMode;
+ }
+
+ if (p != 0) {
+ input_report_abs(inputdev, ABS_X, x);
+ input_report_abs(inputdev, ABS_Y, y);
+ input_report_abs(inputdev, ABS_PRESSURE, z);
+
+ input_report_key(inputdev, BTN_TOUCH, tip);
+ input_report_key(inputdev, BTN_STYLUS, bs);
+ input_report_key(inputdev, BTN_STYLUS2, pck);
+
+ if (aiptek->curSetting.xTilt !=
+ AIPTEK_TILT_DISABLE) {
+ input_report_abs(inputdev,
+ ABS_TILT_X,
+ aiptek->curSetting.xTilt);
+ }
+ if (aiptek->curSetting.yTilt != AIPTEK_TILT_DISABLE) {
+ input_report_abs(inputdev,
+ ABS_TILT_Y,
+ aiptek->curSetting.yTilt);
+ }
+
+ /* Wheel support is in the form of a single-event
+ * firing.
+ */
+ if (aiptek->curSetting.wheel !=
+ AIPTEK_WHEEL_DISABLE) {
+ input_report_abs(inputdev,
+ ABS_WHEEL,
+ aiptek->curSetting.wheel);
+ aiptek->curSetting.wheel = AIPTEK_WHEEL_DISABLE;
+ }
+ }
+ input_report_abs(inputdev, ABS_MISC, p | AIPTEK_REPORT_TOOL_STYLUS);
+ if (aiptek->lastMacro != -1) {
+ input_report_key(inputdev,
+ macroKeyEvents[aiptek->lastMacro], 0);
+ aiptek->lastMacro = -1;
+ }
+ input_sync(inputdev);
+ }
+ }
+ }
+ /* Report 3's come from the mouse in absolute mode.
+ */
+ else if (data[0] == 3) {
+ if (aiptek->curSetting.coordinateMode == AIPTEK_COORDINATE_RELATIVE_MODE) {
+ aiptek->diagnostic = AIPTEK_DIAGNOSTIC_SENDING_ABSOLUTE_IN_RELATIVE;
+ } else if (!AIPTEK_POINTER_ALLOW_MOUSE_MODE
+ (aiptek->curSetting.pointerMode)) {
+ aiptek->diagnostic = AIPTEK_DIAGNOSTIC_TOOL_DISALLOWED;
+ } else {
+ x = get_unaligned_le16(data + 1);
+ y = get_unaligned_le16(data + 3);
+
+ jitterable = data[5] & 0x1c;
+
+ dv = (data[5] & 0x01) != 0 ? 1 : 0;
+ p = (data[5] & 0x02) != 0 ? 1 : 0;
+ left = (data[5] & aiptek->curSetting.mouseButtonLeft) != 0 ? 1 : 0;
+ right = (data[5] & aiptek->curSetting.mouseButtonRight) != 0 ? 1 : 0;
+ middle = (data[5] & aiptek->curSetting.mouseButtonMiddle) != 0 ? 1 : 0;
+
+ if (dv != 0) {
+ /* If the selected tool changed, reset the old
+ * tool key, and set the new one.
+ */
+ if (aiptek->previousToolMode !=
+ aiptek->curSetting.toolMode) {
+ input_report_key(inputdev,
+ aiptek->previousToolMode, 0);
+ input_report_key(inputdev,
+ aiptek->curSetting.toolMode,
+ 1);
+ aiptek->previousToolMode =
+ aiptek->curSetting.toolMode;
+ }
+
+ if (p != 0) {
+ input_report_abs(inputdev, ABS_X, x);
+ input_report_abs(inputdev, ABS_Y, y);
+
+ input_report_key(inputdev, BTN_LEFT, left);
+ input_report_key(inputdev, BTN_MIDDLE, middle);
+ input_report_key(inputdev, BTN_RIGHT, right);
+
+ /* Wheel support is in the form of a single-event
+ * firing.
+ */
+ if (aiptek->curSetting.wheel != AIPTEK_WHEEL_DISABLE) {
+ input_report_abs(inputdev,
+ ABS_WHEEL,
+ aiptek->curSetting.wheel);
+ aiptek->curSetting.wheel = AIPTEK_WHEEL_DISABLE;
+ }
+ }
+ input_report_abs(inputdev, ABS_MISC, p | AIPTEK_REPORT_TOOL_MOUSE);
+ if (aiptek->lastMacro != -1) {
+ input_report_key(inputdev,
+ macroKeyEvents[aiptek->lastMacro], 0);
+ aiptek->lastMacro = -1;
+ }
+ input_sync(inputdev);
+ }
+ }
+ }
+ /* Report 4s come from the macro keys when pressed by stylus
+ */
+ else if (data[0] == 4) {
+ jitterable = data[1] & 0x18;
+
+ dv = (data[1] & 0x01) != 0 ? 1 : 0;
+ p = (data[1] & 0x02) != 0 ? 1 : 0;
+ tip = (data[1] & 0x04) != 0 ? 1 : 0;
+ bs = (data[1] & aiptek->curSetting.stylusButtonLower) != 0 ? 1 : 0;
+ pck = (data[1] & aiptek->curSetting.stylusButtonUpper) != 0 ? 1 : 0;
+
+ macro = dv && p && tip && !(data[3] & 1) ? (data[3] >> 1) : -1;
+ z = get_unaligned_le16(data + 4);
+
+ if (dv) {
+ /* If the selected tool changed, reset the old
+ * tool key, and set the new one.
+ */
+ if (aiptek->previousToolMode !=
+ aiptek->curSetting.toolMode) {
+ input_report_key(inputdev,
+ aiptek->previousToolMode, 0);
+ input_report_key(inputdev,
+ aiptek->curSetting.toolMode,
+ 1);
+ aiptek->previousToolMode =
+ aiptek->curSetting.toolMode;
+ }
+ }
+
+ if (aiptek->lastMacro != -1 && aiptek->lastMacro != macro) {
+ input_report_key(inputdev, macroKeyEvents[aiptek->lastMacro], 0);
+ aiptek->lastMacro = -1;
+ }
+
+ if (macro != -1 && macro != aiptek->lastMacro) {
+ input_report_key(inputdev, macroKeyEvents[macro], 1);
+ aiptek->lastMacro = macro;
+ }
+ input_report_abs(inputdev, ABS_MISC,
+ p | AIPTEK_REPORT_TOOL_STYLUS);
+ input_sync(inputdev);
+ }
+ /* Report 5s come from the macro keys when pressed by mouse
+ */
+ else if (data[0] == 5) {
+ jitterable = data[1] & 0x1c;
+
+ dv = (data[1] & 0x01) != 0 ? 1 : 0;
+ p = (data[1] & 0x02) != 0 ? 1 : 0;
+ left = (data[1]& aiptek->curSetting.mouseButtonLeft) != 0 ? 1 : 0;
+ right = (data[1] & aiptek->curSetting.mouseButtonRight) != 0 ? 1 : 0;
+ middle = (data[1] & aiptek->curSetting.mouseButtonMiddle) != 0 ? 1 : 0;
+ macro = dv && p && left && !(data[3] & 1) ? (data[3] >> 1) : 0;
+
+ if (dv) {
+ /* If the selected tool changed, reset the old
+ * tool key, and set the new one.
+ */
+ if (aiptek->previousToolMode !=
+ aiptek->curSetting.toolMode) {
+ input_report_key(inputdev,
+ aiptek->previousToolMode, 0);
+ input_report_key(inputdev,
+ aiptek->curSetting.toolMode, 1);
+ aiptek->previousToolMode = aiptek->curSetting.toolMode;
+ }
+ }
+
+ if (aiptek->lastMacro != -1 && aiptek->lastMacro != macro) {
+ input_report_key(inputdev, macroKeyEvents[aiptek->lastMacro], 0);
+ aiptek->lastMacro = -1;
+ }
+
+ if (macro != -1 && macro != aiptek->lastMacro) {
+ input_report_key(inputdev, macroKeyEvents[macro], 1);
+ aiptek->lastMacro = macro;
+ }
+
+ input_report_abs(inputdev, ABS_MISC,
+ p | AIPTEK_REPORT_TOOL_MOUSE);
+ input_sync(inputdev);
+ }
+ /* We have no idea which tool can generate a report 6. Theoretically,
+ * neither need to, having been given reports 4 & 5 for such use.
+ * However, report 6 is the 'official-looking' report for macroKeys;
+ * reports 4 & 5 supposively are used to support unnamed, unknown
+ * hat switches (which just so happen to be the macroKeys.)
+ */
+ else if (data[0] == 6) {
+ macro = get_unaligned_le16(data + 1);
+ if (macro > 0) {
+ input_report_key(inputdev, macroKeyEvents[macro - 1],
+ 0);
+ }
+ if (macro < 25) {
+ input_report_key(inputdev, macroKeyEvents[macro + 1],
+ 0);
+ }
+
+ /* If the selected tool changed, reset the old
+ tool key, and set the new one.
+ */
+ if (aiptek->previousToolMode !=
+ aiptek->curSetting.toolMode) {
+ input_report_key(inputdev,
+ aiptek->previousToolMode, 0);
+ input_report_key(inputdev,
+ aiptek->curSetting.toolMode,
+ 1);
+ aiptek->previousToolMode =
+ aiptek->curSetting.toolMode;
+ }
+
+ input_report_key(inputdev, macroKeyEvents[macro], 1);
+ input_report_abs(inputdev, ABS_MISC,
+ 1 | AIPTEK_REPORT_TOOL_UNKNOWN);
+ input_sync(inputdev);
+ } else {
+ dev_dbg(&intf->dev, "Unknown report %d\n", data[0]);
+ }
+
+ /* Jitter may occur when the user presses a button on the stlyus
+ * or the mouse. What we do to prevent that is wait 'x' milliseconds
+ * following a 'jitterable' event, which should give the hand some time
+ * stabilize itself.
+ *
+ * We just introduced aiptek->previousJitterable to carry forth the
+ * notion that jitter occurs when the button state changes from on to off:
+ * a person drawing, holding a button down is not subject to jittering.
+ * With that in mind, changing from upper button depressed to lower button
+ * WILL transition through a jitter delay.
+ */
+
+ if (aiptek->previousJitterable != jitterable &&
+ aiptek->curSetting.jitterDelay != 0 && aiptek->inDelay != 1) {
+ aiptek->endDelay = jiffies +
+ ((aiptek->curSetting.jitterDelay * HZ) / 1000);
+ aiptek->inDelay = 1;
+ }
+ aiptek->previousJitterable = jitterable;
+
+exit:
+ retval = usb_submit_urb(urb, GFP_ATOMIC);
+ if (retval != 0) {
+ dev_err(&intf->dev,
+ "%s - usb_submit_urb failed with result %d\n",
+ __func__, retval);
+ }
+}
+
+/***********************************************************************
+ * These are the USB id's known so far. We do not identify them to
+ * specific Aiptek model numbers, because there has been overlaps,
+ * use, and reuse of id's in existing models. Certain models have
+ * been known to use more than one ID, indicative perhaps of
+ * manufacturing revisions. In any event, we consider these
+ * IDs to not be model-specific nor unique.
+ */
+static const struct usb_device_id aiptek_ids[] = {
+ {USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x01)},
+ {USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x10)},
+ {USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x20)},
+ {USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x21)},
+ {USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x22)},
+ {USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x23)},
+ {USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x24)},
+ {USB_DEVICE(USB_VENDOR_ID_KYE, 0x5003)},
+ {}
+};
+
+MODULE_DEVICE_TABLE(usb, aiptek_ids);
+
+/***********************************************************************
+ * Open an instance of the tablet driver.
+ */
+static int aiptek_open(struct input_dev *inputdev)
+{
+ struct aiptek *aiptek = input_get_drvdata(inputdev);
+
+ aiptek->urb->dev = aiptek->usbdev;
+ if (usb_submit_urb(aiptek->urb, GFP_KERNEL) != 0)
+ return -EIO;
+
+ return 0;
+}
+
+/***********************************************************************
+ * Close an instance of the tablet driver.
+ */
+static void aiptek_close(struct input_dev *inputdev)
+{
+ struct aiptek *aiptek = input_get_drvdata(inputdev);
+
+ usb_kill_urb(aiptek->urb);
+}
+
+/***********************************************************************
+ * aiptek_set_report and aiptek_get_report() are borrowed from Linux 2.4.x,
+ * where they were known as usb_set_report and usb_get_report.
+ */
+static int
+aiptek_set_report(struct aiptek *aiptek,
+ unsigned char report_type,
+ unsigned char report_id, void *buffer, int size)
+{
+ return usb_control_msg(aiptek->usbdev,
+ usb_sndctrlpipe(aiptek->usbdev, 0),
+ USB_REQ_SET_REPORT,
+ USB_TYPE_CLASS | USB_RECIP_INTERFACE |
+ USB_DIR_OUT, (report_type << 8) + report_id,
+ aiptek->ifnum, buffer, size, 5000);
+}
+
+static int
+aiptek_get_report(struct aiptek *aiptek,
+ unsigned char report_type,
+ unsigned char report_id, void *buffer, int size)
+{
+ return usb_control_msg(aiptek->usbdev,
+ usb_rcvctrlpipe(aiptek->usbdev, 0),
+ USB_REQ_GET_REPORT,
+ USB_TYPE_CLASS | USB_RECIP_INTERFACE |
+ USB_DIR_IN, (report_type << 8) + report_id,
+ aiptek->ifnum, buffer, size, 5000);
+}
+
+/***********************************************************************
+ * Send a command to the tablet.
+ */
+static int
+aiptek_command(struct aiptek *aiptek, unsigned char command, unsigned char data)
+{
+ const int sizeof_buf = 3 * sizeof(u8);
+ int ret;
+ u8 *buf;
+
+ buf = kmalloc(sizeof_buf, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ buf[0] = 2;
+ buf[1] = command;
+ buf[2] = data;
+
+ if ((ret =
+ aiptek_set_report(aiptek, 3, 2, buf, sizeof_buf)) != sizeof_buf) {
+ dev_dbg(&aiptek->intf->dev,
+ "aiptek_program: failed, tried to send: 0x%02x 0x%02x\n",
+ command, data);
+ }
+ kfree(buf);
+ return ret < 0 ? ret : 0;
+}
+
+/***********************************************************************
+ * Retrieve information from the tablet. Querying info is defined as first
+ * sending the {command,data} sequence as a command, followed by a wait
+ * (aka, "programmaticDelay") and then a "read" request.
+ */
+static int
+aiptek_query(struct aiptek *aiptek, unsigned char command, unsigned char data)
+{
+ const int sizeof_buf = 3 * sizeof(u8);
+ int ret;
+ u8 *buf;
+
+ buf = kmalloc(sizeof_buf, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ buf[0] = 2;
+ buf[1] = command;
+ buf[2] = data;
+
+ if (aiptek_command(aiptek, command, data) != 0) {
+ kfree(buf);
+ return -EIO;
+ }
+ msleep(aiptek->curSetting.programmableDelay);
+
+ if ((ret =
+ aiptek_get_report(aiptek, 3, 2, buf, sizeof_buf)) != sizeof_buf) {
+ dev_dbg(&aiptek->intf->dev,
+ "aiptek_query failed: returned 0x%02x 0x%02x 0x%02x\n",
+ buf[0], buf[1], buf[2]);
+ ret = -EIO;
+ } else {
+ ret = get_unaligned_le16(buf + 1);
+ }
+ kfree(buf);
+ return ret;
+}
+
+/***********************************************************************
+ * Program the tablet into either absolute or relative mode.
+ * We also get information about the tablet's size.
+ */
+static int aiptek_program_tablet(struct aiptek *aiptek)
+{
+ int ret;
+ /* Execute Resolution500LPI */
+ if ((ret = aiptek_command(aiptek, 0x18, 0x04)) < 0)
+ return ret;
+
+ /* Query getModelCode */
+ if ((ret = aiptek_query(aiptek, 0x02, 0x00)) < 0)
+ return ret;
+ aiptek->features.modelCode = ret & 0xff;
+
+ /* Query getODMCode */
+ if ((ret = aiptek_query(aiptek, 0x03, 0x00)) < 0)
+ return ret;
+ aiptek->features.odmCode = ret;
+
+ /* Query getFirmwareCode */
+ if ((ret = aiptek_query(aiptek, 0x04, 0x00)) < 0)
+ return ret;
+ aiptek->features.firmwareCode = ret;
+
+ /* Query getXextension */
+ if ((ret = aiptek_query(aiptek, 0x01, 0x00)) < 0)
+ return ret;
+ input_set_abs_params(aiptek->inputdev, ABS_X, 0, ret - 1, 0, 0);
+
+ /* Query getYextension */
+ if ((ret = aiptek_query(aiptek, 0x01, 0x01)) < 0)
+ return ret;
+ input_set_abs_params(aiptek->inputdev, ABS_Y, 0, ret - 1, 0, 0);
+
+ /* Query getPressureLevels */
+ if ((ret = aiptek_query(aiptek, 0x08, 0x00)) < 0)
+ return ret;
+ input_set_abs_params(aiptek->inputdev, ABS_PRESSURE, 0, ret - 1, 0, 0);
+
+ /* Depending on whether we are in absolute or relative mode, we will
+ * do a switchToTablet(absolute) or switchToMouse(relative) command.
+ */
+ if (aiptek->curSetting.coordinateMode ==
+ AIPTEK_COORDINATE_ABSOLUTE_MODE) {
+ /* Execute switchToTablet */
+ if ((ret = aiptek_command(aiptek, 0x10, 0x01)) < 0) {
+ return ret;
+ }
+ } else {
+ /* Execute switchToMouse */
+ if ((ret = aiptek_command(aiptek, 0x10, 0x00)) < 0) {
+ return ret;
+ }
+ }
+
+ /* Enable the macro keys */
+ if ((ret = aiptek_command(aiptek, 0x11, 0x02)) < 0)
+ return ret;
+#if 0
+ /* Execute FilterOn */
+ if ((ret = aiptek_command(aiptek, 0x17, 0x00)) < 0)
+ return ret;
+#endif
+
+ /* Execute AutoGainOn */
+ if ((ret = aiptek_command(aiptek, 0x12, 0xff)) < 0)
+ return ret;
+
+ /* Reset the eventCount, so we track events from last (re)programming
+ */
+ aiptek->diagnostic = AIPTEK_DIAGNOSTIC_NA;
+ aiptek->eventCount = 0;
+
+ return 0;
+}
+
+/***********************************************************************
+ * Sysfs functions. Sysfs prefers that individually-tunable parameters
+ * exist in their separate pseudo-files. Summary data that is immutable
+ * may exist in a singular file so long as you don't define a writeable
+ * interface.
+ */
+
+/***********************************************************************
+ * support the 'size' file -- display support
+ */
+static ssize_t show_tabletSize(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct aiptek *aiptek = dev_get_drvdata(dev);
+
+ return snprintf(buf, PAGE_SIZE, "%dx%d\n",
+ input_abs_get_max(aiptek->inputdev, ABS_X) + 1,
+ input_abs_get_max(aiptek->inputdev, ABS_Y) + 1);
+}
+
+/* These structs define the sysfs files, param #1 is the name of the
+ * file, param 2 is the file permissions, param 3 & 4 are to the
+ * output generator and input parser routines. Absence of a routine is
+ * permitted -- it only means can't either 'cat' the file, or send data
+ * to it.
+ */
+static DEVICE_ATTR(size, S_IRUGO, show_tabletSize, NULL);
+
+/***********************************************************************
+ * support routines for the 'pointer_mode' file. Note that this file
+ * both displays current setting and allows reprogramming.
+ */
+static struct aiptek_map pointer_mode_map[] = {
+ { "stylus", AIPTEK_POINTER_ONLY_STYLUS_MODE },
+ { "mouse", AIPTEK_POINTER_ONLY_MOUSE_MODE },
+ { "either", AIPTEK_POINTER_EITHER_MODE },
+ { NULL, AIPTEK_INVALID_VALUE }
+};
+
+static ssize_t show_tabletPointerMode(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct aiptek *aiptek = dev_get_drvdata(dev);
+
+ return snprintf(buf, PAGE_SIZE, "%s\n",
+ map_val_to_str(pointer_mode_map,
+ aiptek->curSetting.pointerMode));
+}
+
+static ssize_t
+store_tabletPointerMode(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct aiptek *aiptek = dev_get_drvdata(dev);
+ int new_mode = map_str_to_val(pointer_mode_map, buf, count);
+
+ if (new_mode == AIPTEK_INVALID_VALUE)
+ return -EINVAL;
+
+ aiptek->newSetting.pointerMode = new_mode;
+ return count;
+}
+
+static DEVICE_ATTR(pointer_mode,
+ S_IRUGO | S_IWUSR,
+ show_tabletPointerMode, store_tabletPointerMode);
+
+/***********************************************************************
+ * support routines for the 'coordinate_mode' file. Note that this file
+ * both displays current setting and allows reprogramming.
+ */
+
+static struct aiptek_map coordinate_mode_map[] = {
+ { "absolute", AIPTEK_COORDINATE_ABSOLUTE_MODE },
+ { "relative", AIPTEK_COORDINATE_RELATIVE_MODE },
+ { NULL, AIPTEK_INVALID_VALUE }
+};
+
+static ssize_t show_tabletCoordinateMode(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct aiptek *aiptek = dev_get_drvdata(dev);
+
+ return snprintf(buf, PAGE_SIZE, "%s\n",
+ map_val_to_str(coordinate_mode_map,
+ aiptek->curSetting.coordinateMode));
+}
+
+static ssize_t
+store_tabletCoordinateMode(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct aiptek *aiptek = dev_get_drvdata(dev);
+ int new_mode = map_str_to_val(coordinate_mode_map, buf, count);
+
+ if (new_mode == AIPTEK_INVALID_VALUE)
+ return -EINVAL;
+
+ aiptek->newSetting.coordinateMode = new_mode;
+ return count;
+}
+
+static DEVICE_ATTR(coordinate_mode,
+ S_IRUGO | S_IWUSR,
+ show_tabletCoordinateMode, store_tabletCoordinateMode);
+
+/***********************************************************************
+ * support routines for the 'tool_mode' file. Note that this file
+ * both displays current setting and allows reprogramming.
+ */
+
+static struct aiptek_map tool_mode_map[] = {
+ { "mouse", AIPTEK_TOOL_BUTTON_MOUSE_MODE },
+ { "eraser", AIPTEK_TOOL_BUTTON_ERASER_MODE },
+ { "pencil", AIPTEK_TOOL_BUTTON_PENCIL_MODE },
+ { "pen", AIPTEK_TOOL_BUTTON_PEN_MODE },
+ { "brush", AIPTEK_TOOL_BUTTON_BRUSH_MODE },
+ { "airbrush", AIPTEK_TOOL_BUTTON_AIRBRUSH_MODE },
+ { "lens", AIPTEK_TOOL_BUTTON_LENS_MODE },
+ { NULL, AIPTEK_INVALID_VALUE }
+};
+
+static ssize_t show_tabletToolMode(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct aiptek *aiptek = dev_get_drvdata(dev);
+
+ return snprintf(buf, PAGE_SIZE, "%s\n",
+ map_val_to_str(tool_mode_map,
+ aiptek->curSetting.toolMode));
+}
+
+static ssize_t
+store_tabletToolMode(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct aiptek *aiptek = dev_get_drvdata(dev);
+ int new_mode = map_str_to_val(tool_mode_map, buf, count);
+
+ if (new_mode == AIPTEK_INVALID_VALUE)
+ return -EINVAL;
+
+ aiptek->newSetting.toolMode = new_mode;
+ return count;
+}
+
+static DEVICE_ATTR(tool_mode,
+ S_IRUGO | S_IWUSR,
+ show_tabletToolMode, store_tabletToolMode);
+
+/***********************************************************************
+ * support routines for the 'xtilt' file. Note that this file
+ * both displays current setting and allows reprogramming.
+ */
+static ssize_t show_tabletXtilt(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct aiptek *aiptek = dev_get_drvdata(dev);
+
+ if (aiptek->curSetting.xTilt == AIPTEK_TILT_DISABLE) {
+ return snprintf(buf, PAGE_SIZE, "disable\n");
+ } else {
+ return snprintf(buf, PAGE_SIZE, "%d\n",
+ aiptek->curSetting.xTilt);
+ }
+}
+
+static ssize_t
+store_tabletXtilt(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct aiptek *aiptek = dev_get_drvdata(dev);
+ int x;
+
+ if (kstrtoint(buf, 10, &x)) {
+ size_t len = buf[count - 1] == '\n' ? count - 1 : count;
+
+ if (strncmp(buf, "disable", len))
+ return -EINVAL;
+
+ aiptek->newSetting.xTilt = AIPTEK_TILT_DISABLE;
+ } else {
+ if (x < AIPTEK_TILT_MIN || x > AIPTEK_TILT_MAX)
+ return -EINVAL;
+
+ aiptek->newSetting.xTilt = x;
+ }
+
+ return count;
+}
+
+static DEVICE_ATTR(xtilt,
+ S_IRUGO | S_IWUSR, show_tabletXtilt, store_tabletXtilt);
+
+/***********************************************************************
+ * support routines for the 'ytilt' file. Note that this file
+ * both displays current setting and allows reprogramming.
+ */
+static ssize_t show_tabletYtilt(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct aiptek *aiptek = dev_get_drvdata(dev);
+
+ if (aiptek->curSetting.yTilt == AIPTEK_TILT_DISABLE) {
+ return snprintf(buf, PAGE_SIZE, "disable\n");
+ } else {
+ return snprintf(buf, PAGE_SIZE, "%d\n",
+ aiptek->curSetting.yTilt);
+ }
+}
+
+static ssize_t
+store_tabletYtilt(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct aiptek *aiptek = dev_get_drvdata(dev);
+ int y;
+
+ if (kstrtoint(buf, 10, &y)) {
+ size_t len = buf[count - 1] == '\n' ? count - 1 : count;
+
+ if (strncmp(buf, "disable", len))
+ return -EINVAL;
+
+ aiptek->newSetting.yTilt = AIPTEK_TILT_DISABLE;
+ } else {
+ if (y < AIPTEK_TILT_MIN || y > AIPTEK_TILT_MAX)
+ return -EINVAL;
+
+ aiptek->newSetting.yTilt = y;
+ }
+
+ return count;
+}
+
+static DEVICE_ATTR(ytilt,
+ S_IRUGO | S_IWUSR, show_tabletYtilt, store_tabletYtilt);
+
+/***********************************************************************
+ * support routines for the 'jitter' file. Note that this file
+ * both displays current setting and allows reprogramming.
+ */
+static ssize_t show_tabletJitterDelay(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct aiptek *aiptek = dev_get_drvdata(dev);
+
+ return snprintf(buf, PAGE_SIZE, "%d\n", aiptek->curSetting.jitterDelay);
+}
+
+static ssize_t
+store_tabletJitterDelay(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct aiptek *aiptek = dev_get_drvdata(dev);
+ int err, j;
+
+ err = kstrtoint(buf, 10, &j);
+ if (err)
+ return err;
+
+ aiptek->newSetting.jitterDelay = j;
+ return count;
+}
+
+static DEVICE_ATTR(jitter,
+ S_IRUGO | S_IWUSR,
+ show_tabletJitterDelay, store_tabletJitterDelay);
+
+/***********************************************************************
+ * support routines for the 'delay' file. Note that this file
+ * both displays current setting and allows reprogramming.
+ */
+static ssize_t show_tabletProgrammableDelay(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct aiptek *aiptek = dev_get_drvdata(dev);
+
+ return snprintf(buf, PAGE_SIZE, "%d\n",
+ aiptek->curSetting.programmableDelay);
+}
+
+static ssize_t
+store_tabletProgrammableDelay(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct aiptek *aiptek = dev_get_drvdata(dev);
+ int err, d;
+
+ err = kstrtoint(buf, 10, &d);
+ if (err)
+ return err;
+
+ aiptek->newSetting.programmableDelay = d;
+ return count;
+}
+
+static DEVICE_ATTR(delay,
+ S_IRUGO | S_IWUSR,
+ show_tabletProgrammableDelay, store_tabletProgrammableDelay);
+
+/***********************************************************************
+ * support routines for the 'event_count' file. Note that this file
+ * only displays current setting.
+ */
+static ssize_t show_tabletEventsReceived(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct aiptek *aiptek = dev_get_drvdata(dev);
+
+ return snprintf(buf, PAGE_SIZE, "%ld\n", aiptek->eventCount);
+}
+
+static DEVICE_ATTR(event_count, S_IRUGO, show_tabletEventsReceived, NULL);
+
+/***********************************************************************
+ * support routines for the 'diagnostic' file. Note that this file
+ * only displays current setting.
+ */
+static ssize_t show_tabletDiagnosticMessage(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct aiptek *aiptek = dev_get_drvdata(dev);
+ char *retMsg;
+
+ switch (aiptek->diagnostic) {
+ case AIPTEK_DIAGNOSTIC_NA:
+ retMsg = "no errors\n";
+ break;
+
+ case AIPTEK_DIAGNOSTIC_SENDING_RELATIVE_IN_ABSOLUTE:
+ retMsg = "Error: receiving relative reports\n";
+ break;
+
+ case AIPTEK_DIAGNOSTIC_SENDING_ABSOLUTE_IN_RELATIVE:
+ retMsg = "Error: receiving absolute reports\n";
+ break;
+
+ case AIPTEK_DIAGNOSTIC_TOOL_DISALLOWED:
+ if (aiptek->curSetting.pointerMode ==
+ AIPTEK_POINTER_ONLY_MOUSE_MODE) {
+ retMsg = "Error: receiving stylus reports\n";
+ } else {
+ retMsg = "Error: receiving mouse reports\n";
+ }
+ break;
+
+ default:
+ return 0;
+ }
+ return snprintf(buf, PAGE_SIZE, retMsg);
+}
+
+static DEVICE_ATTR(diagnostic, S_IRUGO, show_tabletDiagnosticMessage, NULL);
+
+/***********************************************************************
+ * support routines for the 'stylus_upper' file. Note that this file
+ * both displays current setting and allows for setting changing.
+ */
+
+static struct aiptek_map stylus_button_map[] = {
+ { "upper", AIPTEK_STYLUS_UPPER_BUTTON },
+ { "lower", AIPTEK_STYLUS_LOWER_BUTTON },
+ { NULL, AIPTEK_INVALID_VALUE }
+};
+
+static ssize_t show_tabletStylusUpper(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct aiptek *aiptek = dev_get_drvdata(dev);
+
+ return snprintf(buf, PAGE_SIZE, "%s\n",
+ map_val_to_str(stylus_button_map,
+ aiptek->curSetting.stylusButtonUpper));
+}
+
+static ssize_t
+store_tabletStylusUpper(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct aiptek *aiptek = dev_get_drvdata(dev);
+ int new_button = map_str_to_val(stylus_button_map, buf, count);
+
+ if (new_button == AIPTEK_INVALID_VALUE)
+ return -EINVAL;
+
+ aiptek->newSetting.stylusButtonUpper = new_button;
+ return count;
+}
+
+static DEVICE_ATTR(stylus_upper,
+ S_IRUGO | S_IWUSR,
+ show_tabletStylusUpper, store_tabletStylusUpper);
+
+/***********************************************************************
+ * support routines for the 'stylus_lower' file. Note that this file
+ * both displays current setting and allows for setting changing.
+ */
+
+static ssize_t show_tabletStylusLower(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct aiptek *aiptek = dev_get_drvdata(dev);
+
+ return snprintf(buf, PAGE_SIZE, "%s\n",
+ map_val_to_str(stylus_button_map,
+ aiptek->curSetting.stylusButtonLower));
+}
+
+static ssize_t
+store_tabletStylusLower(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct aiptek *aiptek = dev_get_drvdata(dev);
+ int new_button = map_str_to_val(stylus_button_map, buf, count);
+
+ if (new_button == AIPTEK_INVALID_VALUE)
+ return -EINVAL;
+
+ aiptek->newSetting.stylusButtonLower = new_button;
+ return count;
+}
+
+static DEVICE_ATTR(stylus_lower,
+ S_IRUGO | S_IWUSR,
+ show_tabletStylusLower, store_tabletStylusLower);
+
+/***********************************************************************
+ * support routines for the 'mouse_left' file. Note that this file
+ * both displays current setting and allows for setting changing.
+ */
+
+static struct aiptek_map mouse_button_map[] = {
+ { "left", AIPTEK_MOUSE_LEFT_BUTTON },
+ { "middle", AIPTEK_MOUSE_MIDDLE_BUTTON },
+ { "right", AIPTEK_MOUSE_RIGHT_BUTTON },
+ { NULL, AIPTEK_INVALID_VALUE }
+};
+
+static ssize_t show_tabletMouseLeft(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct aiptek *aiptek = dev_get_drvdata(dev);
+
+ return snprintf(buf, PAGE_SIZE, "%s\n",
+ map_val_to_str(mouse_button_map,
+ aiptek->curSetting.mouseButtonLeft));
+}
+
+static ssize_t
+store_tabletMouseLeft(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct aiptek *aiptek = dev_get_drvdata(dev);
+ int new_button = map_str_to_val(mouse_button_map, buf, count);
+
+ if (new_button == AIPTEK_INVALID_VALUE)
+ return -EINVAL;
+
+ aiptek->newSetting.mouseButtonLeft = new_button;
+ return count;
+}
+
+static DEVICE_ATTR(mouse_left,
+ S_IRUGO | S_IWUSR,
+ show_tabletMouseLeft, store_tabletMouseLeft);
+
+/***********************************************************************
+ * support routines for the 'mouse_middle' file. Note that this file
+ * both displays current setting and allows for setting changing.
+ */
+static ssize_t show_tabletMouseMiddle(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct aiptek *aiptek = dev_get_drvdata(dev);
+
+ return snprintf(buf, PAGE_SIZE, "%s\n",
+ map_val_to_str(mouse_button_map,
+ aiptek->curSetting.mouseButtonMiddle));
+}
+
+static ssize_t
+store_tabletMouseMiddle(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct aiptek *aiptek = dev_get_drvdata(dev);
+ int new_button = map_str_to_val(mouse_button_map, buf, count);
+
+ if (new_button == AIPTEK_INVALID_VALUE)
+ return -EINVAL;
+
+ aiptek->newSetting.mouseButtonMiddle = new_button;
+ return count;
+}
+
+static DEVICE_ATTR(mouse_middle,
+ S_IRUGO | S_IWUSR,
+ show_tabletMouseMiddle, store_tabletMouseMiddle);
+
+/***********************************************************************
+ * support routines for the 'mouse_right' file. Note that this file
+ * both displays current setting and allows for setting changing.
+ */
+static ssize_t show_tabletMouseRight(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct aiptek *aiptek = dev_get_drvdata(dev);
+
+ return snprintf(buf, PAGE_SIZE, "%s\n",
+ map_val_to_str(mouse_button_map,
+ aiptek->curSetting.mouseButtonRight));
+}
+
+static ssize_t
+store_tabletMouseRight(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct aiptek *aiptek = dev_get_drvdata(dev);
+ int new_button = map_str_to_val(mouse_button_map, buf, count);
+
+ if (new_button == AIPTEK_INVALID_VALUE)
+ return -EINVAL;
+
+ aiptek->newSetting.mouseButtonRight = new_button;
+ return count;
+}
+
+static DEVICE_ATTR(mouse_right,
+ S_IRUGO | S_IWUSR,
+ show_tabletMouseRight, store_tabletMouseRight);
+
+/***********************************************************************
+ * support routines for the 'wheel' file. Note that this file
+ * both displays current setting and allows for setting changing.
+ */
+static ssize_t show_tabletWheel(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct aiptek *aiptek = dev_get_drvdata(dev);
+
+ if (aiptek->curSetting.wheel == AIPTEK_WHEEL_DISABLE) {
+ return snprintf(buf, PAGE_SIZE, "disable\n");
+ } else {
+ return snprintf(buf, PAGE_SIZE, "%d\n",
+ aiptek->curSetting.wheel);
+ }
+}
+
+static ssize_t
+store_tabletWheel(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct aiptek *aiptek = dev_get_drvdata(dev);
+ int err, w;
+
+ err = kstrtoint(buf, 10, &w);
+ if (err)
+ return err;
+
+ aiptek->newSetting.wheel = w;
+ return count;
+}
+
+static DEVICE_ATTR(wheel,
+ S_IRUGO | S_IWUSR, show_tabletWheel, store_tabletWheel);
+
+/***********************************************************************
+ * support routines for the 'execute' file. Note that this file
+ * both displays current setting and allows for setting changing.
+ */
+static ssize_t show_tabletExecute(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ /* There is nothing useful to display, so a one-line manual
+ * is in order...
+ */
+ return snprintf(buf, PAGE_SIZE,
+ "Write anything to this file to program your tablet.\n");
+}
+
+static ssize_t
+store_tabletExecute(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct aiptek *aiptek = dev_get_drvdata(dev);
+
+ /* We do not care what you write to this file. Merely the action
+ * of writing to this file triggers a tablet reprogramming.
+ */
+ memcpy(&aiptek->curSetting, &aiptek->newSetting,
+ sizeof(struct aiptek_settings));
+
+ if (aiptek_program_tablet(aiptek) < 0)
+ return -EIO;
+
+ return count;
+}
+
+static DEVICE_ATTR(execute,
+ S_IRUGO | S_IWUSR, show_tabletExecute, store_tabletExecute);
+
+/***********************************************************************
+ * support routines for the 'odm_code' file. Note that this file
+ * only displays current setting.
+ */
+static ssize_t show_tabletODMCode(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct aiptek *aiptek = dev_get_drvdata(dev);
+
+ return snprintf(buf, PAGE_SIZE, "0x%04x\n", aiptek->features.odmCode);
+}
+
+static DEVICE_ATTR(odm_code, S_IRUGO, show_tabletODMCode, NULL);
+
+/***********************************************************************
+ * support routines for the 'model_code' file. Note that this file
+ * only displays current setting.
+ */
+static ssize_t show_tabletModelCode(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct aiptek *aiptek = dev_get_drvdata(dev);
+
+ return snprintf(buf, PAGE_SIZE, "0x%04x\n", aiptek->features.modelCode);
+}
+
+static DEVICE_ATTR(model_code, S_IRUGO, show_tabletModelCode, NULL);
+
+/***********************************************************************
+ * support routines for the 'firmware_code' file. Note that this file
+ * only displays current setting.
+ */
+static ssize_t show_firmwareCode(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct aiptek *aiptek = dev_get_drvdata(dev);
+
+ return snprintf(buf, PAGE_SIZE, "%04x\n",
+ aiptek->features.firmwareCode);
+}
+
+static DEVICE_ATTR(firmware_code, S_IRUGO, show_firmwareCode, NULL);
+
+static struct attribute *aiptek_attributes[] = {
+ &dev_attr_size.attr,
+ &dev_attr_pointer_mode.attr,
+ &dev_attr_coordinate_mode.attr,
+ &dev_attr_tool_mode.attr,
+ &dev_attr_xtilt.attr,
+ &dev_attr_ytilt.attr,
+ &dev_attr_jitter.attr,
+ &dev_attr_delay.attr,
+ &dev_attr_event_count.attr,
+ &dev_attr_diagnostic.attr,
+ &dev_attr_odm_code.attr,
+ &dev_attr_model_code.attr,
+ &dev_attr_firmware_code.attr,
+ &dev_attr_stylus_lower.attr,
+ &dev_attr_stylus_upper.attr,
+ &dev_attr_mouse_left.attr,
+ &dev_attr_mouse_middle.attr,
+ &dev_attr_mouse_right.attr,
+ &dev_attr_wheel.attr,
+ &dev_attr_execute.attr,
+ NULL
+};
+
+static struct attribute_group aiptek_attribute_group = {
+ .attrs = aiptek_attributes,
+};
+
+/***********************************************************************
+ * This routine is called when a tablet has been identified. It basically
+ * sets up the tablet and the driver's internal structures.
+ */
+static int
+aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+ struct usb_device *usbdev = interface_to_usbdev(intf);
+ struct usb_endpoint_descriptor *endpoint;
+ struct aiptek *aiptek;
+ struct input_dev *inputdev;
+ int i;
+ int speeds[] = { 0,
+ AIPTEK_PROGRAMMABLE_DELAY_50,
+ AIPTEK_PROGRAMMABLE_DELAY_400,
+ AIPTEK_PROGRAMMABLE_DELAY_25,
+ AIPTEK_PROGRAMMABLE_DELAY_100,
+ AIPTEK_PROGRAMMABLE_DELAY_200,
+ AIPTEK_PROGRAMMABLE_DELAY_300
+ };
+ int err = -ENOMEM;
+
+ /* programmableDelay is where the command-line specified
+ * delay is kept. We make it the first element of speeds[],
+ * so therefore, your override speed is tried first, then the
+ * remainder. Note that the default value of 400ms will be tried
+ * if you do not specify any command line parameter.
+ */
+ speeds[0] = programmableDelay;
+
+ aiptek = kzalloc(sizeof(struct aiptek), GFP_KERNEL);
+ inputdev = input_allocate_device();
+ if (!aiptek || !inputdev) {
+ dev_warn(&intf->dev,
+ "cannot allocate memory or input device\n");
+ goto fail1;
+ }
+
+ aiptek->data = usb_alloc_coherent(usbdev, AIPTEK_PACKET_LENGTH,
+ GFP_ATOMIC, &aiptek->data_dma);
+ if (!aiptek->data) {
+ dev_warn(&intf->dev, "cannot allocate usb buffer\n");
+ goto fail1;
+ }
+
+ aiptek->urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!aiptek->urb) {
+ dev_warn(&intf->dev, "cannot allocate urb\n");
+ goto fail2;
+ }
+
+ aiptek->inputdev = inputdev;
+ aiptek->usbdev = usbdev;
+ aiptek->intf = intf;
+ aiptek->ifnum = intf->altsetting[0].desc.bInterfaceNumber;
+ aiptek->inDelay = 0;
+ aiptek->endDelay = 0;
+ aiptek->previousJitterable = 0;
+ aiptek->lastMacro = -1;
+
+ /* Set up the curSettings struct. Said struct contains the current
+ * programmable parameters. The newSetting struct contains changes
+ * the user makes to the settings via the sysfs interface. Those
+ * changes are not "committed" to curSettings until the user
+ * writes to the sysfs/.../execute file.
+ */
+ aiptek->curSetting.pointerMode = AIPTEK_POINTER_EITHER_MODE;
+ aiptek->curSetting.coordinateMode = AIPTEK_COORDINATE_ABSOLUTE_MODE;
+ aiptek->curSetting.toolMode = AIPTEK_TOOL_BUTTON_PEN_MODE;
+ aiptek->curSetting.xTilt = AIPTEK_TILT_DISABLE;
+ aiptek->curSetting.yTilt = AIPTEK_TILT_DISABLE;
+ aiptek->curSetting.mouseButtonLeft = AIPTEK_MOUSE_LEFT_BUTTON;
+ aiptek->curSetting.mouseButtonMiddle = AIPTEK_MOUSE_MIDDLE_BUTTON;
+ aiptek->curSetting.mouseButtonRight = AIPTEK_MOUSE_RIGHT_BUTTON;
+ aiptek->curSetting.stylusButtonUpper = AIPTEK_STYLUS_UPPER_BUTTON;
+ aiptek->curSetting.stylusButtonLower = AIPTEK_STYLUS_LOWER_BUTTON;
+ aiptek->curSetting.jitterDelay = jitterDelay;
+ aiptek->curSetting.programmableDelay = programmableDelay;
+
+ /* Both structs should have equivalent settings
+ */
+ aiptek->newSetting = aiptek->curSetting;
+
+ /* Determine the usb devices' physical path.
+ * Asketh not why we always pretend we're using "../input0",
+ * but I suspect this will have to be refactored one
+ * day if a single USB device can be a keyboard & a mouse
+ * & a tablet, and the inputX number actually will tell
+ * us something...
+ */
+ usb_make_path(usbdev, aiptek->features.usbPath,
+ sizeof(aiptek->features.usbPath));
+ strlcat(aiptek->features.usbPath, "/input0",
+ sizeof(aiptek->features.usbPath));
+
+ /* Set up client data, pointers to open and close routines
+ * for the input device.
+ */
+ inputdev->name = "Aiptek";
+ inputdev->phys = aiptek->features.usbPath;
+ usb_to_input_id(usbdev, &inputdev->id);
+ inputdev->dev.parent = &intf->dev;
+
+ input_set_drvdata(inputdev, aiptek);
+
+ inputdev->open = aiptek_open;
+ inputdev->close = aiptek_close;
+
+ /* Now program the capacities of the tablet, in terms of being
+ * an input device.
+ */
+ for (i = 0; i < ARRAY_SIZE(eventTypes); ++i)
+ __set_bit(eventTypes[i], inputdev->evbit);
+
+ for (i = 0; i < ARRAY_SIZE(absEvents); ++i)
+ __set_bit(absEvents[i], inputdev->absbit);
+
+ for (i = 0; i < ARRAY_SIZE(relEvents); ++i)
+ __set_bit(relEvents[i], inputdev->relbit);
+
+ __set_bit(MSC_SERIAL, inputdev->mscbit);
+
+ /* Set up key and button codes */
+ for (i = 0; i < ARRAY_SIZE(buttonEvents); ++i)
+ __set_bit(buttonEvents[i], inputdev->keybit);
+
+ for (i = 0; i < ARRAY_SIZE(macroKeyEvents); ++i)
+ __set_bit(macroKeyEvents[i], inputdev->keybit);
+
+ /*
+ * Program the input device coordinate capacities. We do not yet
+ * know what maximum X, Y, and Z values are, so we're putting fake
+ * values in. Later, we'll ask the tablet to put in the correct
+ * values.
+ */
+ input_set_abs_params(inputdev, ABS_X, 0, 2999, 0, 0);
+ input_set_abs_params(inputdev, ABS_Y, 0, 2249, 0, 0);
+ input_set_abs_params(inputdev, ABS_PRESSURE, 0, 511, 0, 0);
+ input_set_abs_params(inputdev, ABS_TILT_X, AIPTEK_TILT_MIN, AIPTEK_TILT_MAX, 0, 0);
+ input_set_abs_params(inputdev, ABS_TILT_Y, AIPTEK_TILT_MIN, AIPTEK_TILT_MAX, 0, 0);
+ input_set_abs_params(inputdev, ABS_WHEEL, AIPTEK_WHEEL_MIN, AIPTEK_WHEEL_MAX - 1, 0, 0);
+
+ endpoint = &intf->altsetting[0].endpoint[0].desc;
+
+ /* Go set up our URB, which is called when the tablet receives
+ * input.
+ */
+ usb_fill_int_urb(aiptek->urb,
+ aiptek->usbdev,
+ usb_rcvintpipe(aiptek->usbdev,
+ endpoint->bEndpointAddress),
+ aiptek->data, 8, aiptek_irq, aiptek,
+ endpoint->bInterval);
+
+ aiptek->urb->transfer_dma = aiptek->data_dma;
+ aiptek->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+ /* Program the tablet. This sets the tablet up in the mode
+ * specified in newSetting, and also queries the tablet's
+ * physical capacities.
+ *
+ * Sanity check: if a tablet doesn't like the slow programmatic
+ * delay, we often get sizes of 0x0. Let's use that as an indicator
+ * to try faster delays, up to 25 ms. If that logic fails, well, you'll
+ * have to explain to us how your tablet thinks it's 0x0, and yet that's
+ * not an error :-)
+ */
+
+ for (i = 0; i < ARRAY_SIZE(speeds); ++i) {
+ aiptek->curSetting.programmableDelay = speeds[i];
+ (void)aiptek_program_tablet(aiptek);
+ if (input_abs_get_max(aiptek->inputdev, ABS_X) > 0) {
+ dev_info(&intf->dev,
+ "Aiptek using %d ms programming speed\n",
+ aiptek->curSetting.programmableDelay);
+ break;
+ }
+ }
+
+ /* Murphy says that some day someone will have a tablet that fails the
+ above test. That's you, Frederic Rodrigo */
+ if (i == ARRAY_SIZE(speeds)) {
+ dev_info(&intf->dev,
+ "Aiptek tried all speeds, no sane response\n");
+ goto fail3;
+ }
+
+ /* Associate this driver's struct with the usb interface.
+ */
+ usb_set_intfdata(intf, aiptek);
+
+ /* Set up the sysfs files
+ */
+ err = sysfs_create_group(&intf->dev.kobj, &aiptek_attribute_group);
+ if (err) {
+ dev_warn(&intf->dev, "cannot create sysfs group err: %d\n",
+ err);
+ goto fail3;
+ }
+
+ /* Register the tablet as an Input Device
+ */
+ err = input_register_device(aiptek->inputdev);
+ if (err) {
+ dev_warn(&intf->dev,
+ "input_register_device returned err: %d\n", err);
+ goto fail4;
+ }
+ return 0;
+
+ fail4: sysfs_remove_group(&intf->dev.kobj, &aiptek_attribute_group);
+ fail3: usb_free_urb(aiptek->urb);
+ fail2: usb_free_coherent(usbdev, AIPTEK_PACKET_LENGTH, aiptek->data,
+ aiptek->data_dma);
+ fail1: usb_set_intfdata(intf, NULL);
+ input_free_device(inputdev);
+ kfree(aiptek);
+ return err;
+}
+
+/***********************************************************************
+ * Deal with tablet disconnecting from the system.
+ */
+static void aiptek_disconnect(struct usb_interface *intf)
+{
+ struct aiptek *aiptek = usb_get_intfdata(intf);
+
+ /* Disassociate driver's struct with usb interface
+ */
+ usb_set_intfdata(intf, NULL);
+ if (aiptek != NULL) {
+ /* Free & unhook everything from the system.
+ */
+ usb_kill_urb(aiptek->urb);
+ input_unregister_device(aiptek->inputdev);
+ sysfs_remove_group(&intf->dev.kobj, &aiptek_attribute_group);
+ usb_free_urb(aiptek->urb);
+ usb_free_coherent(interface_to_usbdev(intf),
+ AIPTEK_PACKET_LENGTH,
+ aiptek->data, aiptek->data_dma);
+ kfree(aiptek);
+ }
+}
+
+static struct usb_driver aiptek_driver = {
+ .name = "aiptek",
+ .probe = aiptek_probe,
+ .disconnect = aiptek_disconnect,
+ .id_table = aiptek_ids,
+};
+
+module_usb_driver(aiptek_driver);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+module_param(programmableDelay, int, 0);
+MODULE_PARM_DESC(programmableDelay, "delay used during tablet programming");
+module_param(jitterDelay, int, 0);
+MODULE_PARM_DESC(jitterDelay, "stylus/mouse settlement delay");
diff --git a/drivers/input/tablet/gtco.c b/drivers/input/tablet/gtco.c
new file mode 100644
index 000000000..3a7f3a4a4
--- /dev/null
+++ b/drivers/input/tablet/gtco.c
@@ -0,0 +1,1023 @@
+/* -*- linux-c -*-
+
+GTCO digitizer USB driver
+
+TO CHECK: Is pressure done right on report 5?
+
+Copyright (C) 2006 GTCO CalComp
+
+This program is free software; you can redistribute it and/or
+modify it under the terms of the GNU General Public License
+as published by the Free Software Foundation; version 2
+of the License.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+Permission to use, copy, modify, distribute, and sell this software and its
+documentation for any purpose is hereby granted without fee, provided that
+the above copyright notice appear in all copies and that both that
+copyright notice and this permission notice appear in supporting
+documentation, and that the name of GTCO-CalComp not be used in advertising
+or publicity pertaining to distribution of the software without specific,
+written prior permission. GTCO-CalComp makes no representations about the
+suitability of this software for any purpose. It is provided "as is"
+without express or implied warranty.
+
+GTCO-CALCOMP DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+EVENT SHALL GTCO-CALCOMP BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
+DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+TORTIOUS ACTIONS, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+PERFORMANCE OF THIS SOFTWARE.
+
+GTCO CalComp, Inc.
+7125 Riverwood Drive
+Columbia, MD 21046
+
+Jeremy Roberson jroberson@gtcocalcomp.com
+Scott Hill shill@gtcocalcomp.com
+*/
+
+
+
+/*#define DEBUG*/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/usb.h>
+#include <asm/uaccess.h>
+#include <asm/unaligned.h>
+#include <asm/byteorder.h>
+#include <linux/bitops.h>
+
+#include <linux/usb/input.h>
+
+/* Version with a Major number of 2 is for kernel inclusion only. */
+#define GTCO_VERSION "2.00.0006"
+
+
+/* MACROS */
+
+#define VENDOR_ID_GTCO 0x078C
+#define PID_400 0x400
+#define PID_401 0x401
+#define PID_1000 0x1000
+#define PID_1001 0x1001
+#define PID_1002 0x1002
+
+/* Max size of a single report */
+#define REPORT_MAX_SIZE 10
+
+
+/* Bitmask whether pen is in range */
+#define MASK_INRANGE 0x20
+#define MASK_BUTTON 0x01F
+
+#define PATHLENGTH 64
+
+/* DATA STRUCTURES */
+
+/* Device table */
+static const struct usb_device_id gtco_usbid_table[] = {
+ { USB_DEVICE(VENDOR_ID_GTCO, PID_400) },
+ { USB_DEVICE(VENDOR_ID_GTCO, PID_401) },
+ { USB_DEVICE(VENDOR_ID_GTCO, PID_1000) },
+ { USB_DEVICE(VENDOR_ID_GTCO, PID_1001) },
+ { USB_DEVICE(VENDOR_ID_GTCO, PID_1002) },
+ { }
+};
+MODULE_DEVICE_TABLE (usb, gtco_usbid_table);
+
+
+/* Structure to hold all of our device specific stuff */
+struct gtco {
+
+ struct input_dev *inputdevice; /* input device struct pointer */
+ struct usb_device *usbdev; /* the usb device for this device */
+ struct usb_interface *intf; /* the usb interface for this device */
+ struct urb *urbinfo; /* urb for incoming reports */
+ dma_addr_t buf_dma; /* dma addr of the data buffer*/
+ unsigned char * buffer; /* databuffer for reports */
+
+ char usbpath[PATHLENGTH];
+ int openCount;
+
+ /* Information pulled from Report Descriptor */
+ u32 usage;
+ u32 min_X;
+ u32 max_X;
+ u32 min_Y;
+ u32 max_Y;
+ s8 mintilt_X;
+ s8 maxtilt_X;
+ s8 mintilt_Y;
+ s8 maxtilt_Y;
+ u32 maxpressure;
+ u32 minpressure;
+};
+
+
+
+/* Code for parsing the HID REPORT DESCRIPTOR */
+
+/* From HID1.11 spec */
+struct hid_descriptor
+{
+ struct usb_descriptor_header header;
+ __le16 bcdHID;
+ u8 bCountryCode;
+ u8 bNumDescriptors;
+ u8 bDescriptorType;
+ __le16 wDescriptorLength;
+} __attribute__ ((packed));
+
+
+#define HID_DESCRIPTOR_SIZE 9
+#define HID_DEVICE_TYPE 33
+#define REPORT_DEVICE_TYPE 34
+
+
+#define PREF_TAG(x) ((x)>>4)
+#define PREF_TYPE(x) ((x>>2)&0x03)
+#define PREF_SIZE(x) ((x)&0x03)
+
+#define TYPE_MAIN 0
+#define TYPE_GLOBAL 1
+#define TYPE_LOCAL 2
+#define TYPE_RESERVED 3
+
+#define TAG_MAIN_INPUT 0x8
+#define TAG_MAIN_OUTPUT 0x9
+#define TAG_MAIN_FEATURE 0xB
+#define TAG_MAIN_COL_START 0xA
+#define TAG_MAIN_COL_END 0xC
+
+#define TAG_GLOB_USAGE 0
+#define TAG_GLOB_LOG_MIN 1
+#define TAG_GLOB_LOG_MAX 2
+#define TAG_GLOB_PHYS_MIN 3
+#define TAG_GLOB_PHYS_MAX 4
+#define TAG_GLOB_UNIT_EXP 5
+#define TAG_GLOB_UNIT 6
+#define TAG_GLOB_REPORT_SZ 7
+#define TAG_GLOB_REPORT_ID 8
+#define TAG_GLOB_REPORT_CNT 9
+#define TAG_GLOB_PUSH 10
+#define TAG_GLOB_POP 11
+
+#define TAG_GLOB_MAX 12
+
+#define DIGITIZER_USAGE_TIP_PRESSURE 0x30
+#define DIGITIZER_USAGE_TILT_X 0x3D
+#define DIGITIZER_USAGE_TILT_Y 0x3E
+
+
+/*
+ * This is an abbreviated parser for the HID Report Descriptor. We
+ * know what devices we are talking to, so this is by no means meant
+ * to be generic. We can make some safe assumptions:
+ *
+ * - We know there are no LONG tags, all short
+ * - We know that we have no MAIN Feature and MAIN Output items
+ * - We know what the IRQ reports are supposed to look like.
+ *
+ * The main purpose of this is to use the HID report desc to figure
+ * out the mins and maxs of the fields in the IRQ reports. The IRQ
+ * reports for 400/401 change slightly if the max X is bigger than 64K.
+ *
+ */
+static void parse_hid_report_descriptor(struct gtco *device, char * report,
+ int length)
+{
+ struct device *ddev = &device->intf->dev;
+ int x, i = 0;
+
+ /* Tag primitive vars */
+ __u8 prefix;
+ __u8 size;
+ __u8 tag;
+ __u8 type;
+ __u8 data = 0;
+ __u16 data16 = 0;
+ __u32 data32 = 0;
+
+ /* For parsing logic */
+ int inputnum = 0;
+ __u32 usage = 0;
+
+ /* Global Values, indexed by TAG */
+ __u32 globalval[TAG_GLOB_MAX];
+ __u32 oldval[TAG_GLOB_MAX];
+
+ /* Debug stuff */
+ char maintype = 'x';
+ char globtype[12];
+ int indent = 0;
+ char indentstr[10] = "";
+
+
+ dev_dbg(ddev, "======>>>>>>PARSE<<<<<<======\n");
+
+ /* Walk this report and pull out the info we need */
+ while (i < length) {
+ prefix = report[i];
+
+ /* Skip over prefix */
+ i++;
+
+ /* Determine data size and save the data in the proper variable */
+ size = PREF_SIZE(prefix);
+ switch (size) {
+ case 1:
+ data = report[i];
+ break;
+ case 2:
+ data16 = get_unaligned_le16(&report[i]);
+ break;
+ case 3:
+ size = 4;
+ data32 = get_unaligned_le32(&report[i]);
+ break;
+ }
+
+ /* Skip size of data */
+ i += size;
+
+ /* What we do depends on the tag type */
+ tag = PREF_TAG(prefix);
+ type = PREF_TYPE(prefix);
+ switch (type) {
+ case TYPE_MAIN:
+ strcpy(globtype, "");
+ switch (tag) {
+
+ case TAG_MAIN_INPUT:
+ /*
+ * The INPUT MAIN tag signifies this is
+ * information from a report. We need to
+ * figure out what it is and store the
+ * min/max values
+ */
+
+ maintype = 'I';
+ if (data == 2)
+ strcpy(globtype, "Variable");
+ else if (data == 3)
+ strcpy(globtype, "Var|Const");
+
+ dev_dbg(ddev, "::::: Saving Report: %d input #%d Max: 0x%X(%d) Min:0x%X(%d) of %d bits\n",
+ globalval[TAG_GLOB_REPORT_ID], inputnum,
+ globalval[TAG_GLOB_LOG_MAX], globalval[TAG_GLOB_LOG_MAX],
+ globalval[TAG_GLOB_LOG_MIN], globalval[TAG_GLOB_LOG_MIN],
+ globalval[TAG_GLOB_REPORT_SZ] * globalval[TAG_GLOB_REPORT_CNT]);
+
+
+ /*
+ We can assume that the first two input items
+ are always the X and Y coordinates. After
+ that, we look for everything else by
+ local usage value
+ */
+ switch (inputnum) {
+ case 0: /* X coord */
+ dev_dbg(ddev, "GER: X Usage: 0x%x\n", usage);
+ if (device->max_X == 0) {
+ device->max_X = globalval[TAG_GLOB_LOG_MAX];
+ device->min_X = globalval[TAG_GLOB_LOG_MIN];
+ }
+ break;
+
+ case 1: /* Y coord */
+ dev_dbg(ddev, "GER: Y Usage: 0x%x\n", usage);
+ if (device->max_Y == 0) {
+ device->max_Y = globalval[TAG_GLOB_LOG_MAX];
+ device->min_Y = globalval[TAG_GLOB_LOG_MIN];
+ }
+ break;
+
+ default:
+ /* Tilt X */
+ if (usage == DIGITIZER_USAGE_TILT_X) {
+ if (device->maxtilt_X == 0) {
+ device->maxtilt_X = globalval[TAG_GLOB_LOG_MAX];
+ device->mintilt_X = globalval[TAG_GLOB_LOG_MIN];
+ }
+ }
+
+ /* Tilt Y */
+ if (usage == DIGITIZER_USAGE_TILT_Y) {
+ if (device->maxtilt_Y == 0) {
+ device->maxtilt_Y = globalval[TAG_GLOB_LOG_MAX];
+ device->mintilt_Y = globalval[TAG_GLOB_LOG_MIN];
+ }
+ }
+
+ /* Pressure */
+ if (usage == DIGITIZER_USAGE_TIP_PRESSURE) {
+ if (device->maxpressure == 0) {
+ device->maxpressure = globalval[TAG_GLOB_LOG_MAX];
+ device->minpressure = globalval[TAG_GLOB_LOG_MIN];
+ }
+ }
+
+ break;
+ }
+
+ inputnum++;
+ break;
+
+ case TAG_MAIN_OUTPUT:
+ maintype = 'O';
+ break;
+
+ case TAG_MAIN_FEATURE:
+ maintype = 'F';
+ break;
+
+ case TAG_MAIN_COL_START:
+ maintype = 'S';
+
+ if (data == 0) {
+ dev_dbg(ddev, "======>>>>>> Physical\n");
+ strcpy(globtype, "Physical");
+ } else
+ dev_dbg(ddev, "======>>>>>>\n");
+
+ /* Indent the debug output */
+ indent++;
+ for (x = 0; x < indent; x++)
+ indentstr[x] = '-';
+ indentstr[x] = 0;
+
+ /* Save global tags */
+ for (x = 0; x < TAG_GLOB_MAX; x++)
+ oldval[x] = globalval[x];
+
+ break;
+
+ case TAG_MAIN_COL_END:
+ dev_dbg(ddev, "<<<<<<======\n");
+ maintype = 'E';
+ indent--;
+ for (x = 0; x < indent; x++)
+ indentstr[x] = '-';
+ indentstr[x] = 0;
+
+ /* Copy global tags back */
+ for (x = 0; x < TAG_GLOB_MAX; x++)
+ globalval[x] = oldval[x];
+
+ break;
+ }
+
+ switch (size) {
+ case 1:
+ dev_dbg(ddev, "%sMAINTAG:(%d) %c SIZE: %d Data: %s 0x%x\n",
+ indentstr, tag, maintype, size, globtype, data);
+ break;
+
+ case 2:
+ dev_dbg(ddev, "%sMAINTAG:(%d) %c SIZE: %d Data: %s 0x%x\n",
+ indentstr, tag, maintype, size, globtype, data16);
+ break;
+
+ case 4:
+ dev_dbg(ddev, "%sMAINTAG:(%d) %c SIZE: %d Data: %s 0x%x\n",
+ indentstr, tag, maintype, size, globtype, data32);
+ break;
+ }
+ break;
+
+ case TYPE_GLOBAL:
+ switch (tag) {
+ case TAG_GLOB_USAGE:
+ /*
+ * First time we hit the global usage tag,
+ * it should tell us the type of device
+ */
+ if (device->usage == 0)
+ device->usage = data;
+
+ strcpy(globtype, "USAGE");
+ break;
+
+ case TAG_GLOB_LOG_MIN:
+ strcpy(globtype, "LOG_MIN");
+ break;
+
+ case TAG_GLOB_LOG_MAX:
+ strcpy(globtype, "LOG_MAX");
+ break;
+
+ case TAG_GLOB_PHYS_MIN:
+ strcpy(globtype, "PHYS_MIN");
+ break;
+
+ case TAG_GLOB_PHYS_MAX:
+ strcpy(globtype, "PHYS_MAX");
+ break;
+
+ case TAG_GLOB_UNIT_EXP:
+ strcpy(globtype, "EXP");
+ break;
+
+ case TAG_GLOB_UNIT:
+ strcpy(globtype, "UNIT");
+ break;
+
+ case TAG_GLOB_REPORT_SZ:
+ strcpy(globtype, "REPORT_SZ");
+ break;
+
+ case TAG_GLOB_REPORT_ID:
+ strcpy(globtype, "REPORT_ID");
+ /* New report, restart numbering */
+ inputnum = 0;
+ break;
+
+ case TAG_GLOB_REPORT_CNT:
+ strcpy(globtype, "REPORT_CNT");
+ break;
+
+ case TAG_GLOB_PUSH:
+ strcpy(globtype, "PUSH");
+ break;
+
+ case TAG_GLOB_POP:
+ strcpy(globtype, "POP");
+ break;
+ }
+
+ /* Check to make sure we have a good tag number
+ so we don't overflow array */
+ if (tag < TAG_GLOB_MAX) {
+ switch (size) {
+ case 1:
+ dev_dbg(ddev, "%sGLOBALTAG:%s(%d) SIZE: %d Data: 0x%x\n",
+ indentstr, globtype, tag, size, data);
+ globalval[tag] = data;
+ break;
+
+ case 2:
+ dev_dbg(ddev, "%sGLOBALTAG:%s(%d) SIZE: %d Data: 0x%x\n",
+ indentstr, globtype, tag, size, data16);
+ globalval[tag] = data16;
+ break;
+
+ case 4:
+ dev_dbg(ddev, "%sGLOBALTAG:%s(%d) SIZE: %d Data: 0x%x\n",
+ indentstr, globtype, tag, size, data32);
+ globalval[tag] = data32;
+ break;
+ }
+ } else {
+ dev_dbg(ddev, "%sGLOBALTAG: ILLEGAL TAG:%d SIZE: %d\n",
+ indentstr, tag, size);
+ }
+ break;
+
+ case TYPE_LOCAL:
+ switch (tag) {
+ case TAG_GLOB_USAGE:
+ strcpy(globtype, "USAGE");
+ /* Always 1 byte */
+ usage = data;
+ break;
+
+ case TAG_GLOB_LOG_MIN:
+ strcpy(globtype, "MIN");
+ break;
+
+ case TAG_GLOB_LOG_MAX:
+ strcpy(globtype, "MAX");
+ break;
+
+ default:
+ strcpy(globtype, "UNKNOWN");
+ break;
+ }
+
+ switch (size) {
+ case 1:
+ dev_dbg(ddev, "%sLOCALTAG:(%d) %s SIZE: %d Data: 0x%x\n",
+ indentstr, tag, globtype, size, data);
+ break;
+
+ case 2:
+ dev_dbg(ddev, "%sLOCALTAG:(%d) %s SIZE: %d Data: 0x%x\n",
+ indentstr, tag, globtype, size, data16);
+ break;
+
+ case 4:
+ dev_dbg(ddev, "%sLOCALTAG:(%d) %s SIZE: %d Data: 0x%x\n",
+ indentstr, tag, globtype, size, data32);
+ break;
+ }
+
+ break;
+ }
+ }
+}
+
+/* INPUT DRIVER Routines */
+
+/*
+ * Called when opening the input device. This will submit the URB to
+ * the usb system so we start getting reports
+ */
+static int gtco_input_open(struct input_dev *inputdev)
+{
+ struct gtco *device = input_get_drvdata(inputdev);
+
+ device->urbinfo->dev = device->usbdev;
+ if (usb_submit_urb(device->urbinfo, GFP_KERNEL))
+ return -EIO;
+
+ return 0;
+}
+
+/*
+ * Called when closing the input device. This will unlink the URB
+ */
+static void gtco_input_close(struct input_dev *inputdev)
+{
+ struct gtco *device = input_get_drvdata(inputdev);
+
+ usb_kill_urb(device->urbinfo);
+}
+
+
+/*
+ * Setup input device capabilities. Tell the input system what this
+ * device is capable of generating.
+ *
+ * This information is based on what is read from the HID report and
+ * placed in the struct gtco structure
+ *
+ */
+static void gtco_setup_caps(struct input_dev *inputdev)
+{
+ struct gtco *device = input_get_drvdata(inputdev);
+
+ /* Which events */
+ inputdev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS) |
+ BIT_MASK(EV_MSC);
+
+ /* Misc event menu block */
+ inputdev->mscbit[0] = BIT_MASK(MSC_SCAN) | BIT_MASK(MSC_SERIAL) |
+ BIT_MASK(MSC_RAW);
+
+ /* Absolute values based on HID report info */
+ input_set_abs_params(inputdev, ABS_X, device->min_X, device->max_X,
+ 0, 0);
+ input_set_abs_params(inputdev, ABS_Y, device->min_Y, device->max_Y,
+ 0, 0);
+
+ /* Proximity */
+ input_set_abs_params(inputdev, ABS_DISTANCE, 0, 1, 0, 0);
+
+ /* Tilt & pressure */
+ input_set_abs_params(inputdev, ABS_TILT_X, device->mintilt_X,
+ device->maxtilt_X, 0, 0);
+ input_set_abs_params(inputdev, ABS_TILT_Y, device->mintilt_Y,
+ device->maxtilt_Y, 0, 0);
+ input_set_abs_params(inputdev, ABS_PRESSURE, device->minpressure,
+ device->maxpressure, 0, 0);
+
+ /* Transducer */
+ input_set_abs_params(inputdev, ABS_MISC, 0, 0xFF, 0, 0);
+}
+
+/* USB Routines */
+
+/*
+ * URB callback routine. Called when we get IRQ reports from the
+ * digitizer.
+ *
+ * This bridges the USB and input device worlds. It generates events
+ * on the input device based on the USB reports.
+ */
+static void gtco_urb_callback(struct urb *urbinfo)
+{
+ struct gtco *device = urbinfo->context;
+ struct input_dev *inputdev;
+ int rc;
+ u32 val = 0;
+ char le_buffer[2];
+
+ inputdev = device->inputdevice;
+
+ /* Was callback OK? */
+ if (urbinfo->status == -ECONNRESET ||
+ urbinfo->status == -ENOENT ||
+ urbinfo->status == -ESHUTDOWN) {
+
+ /* Shutdown is occurring. Return and don't queue up any more */
+ return;
+ }
+
+ if (urbinfo->status != 0) {
+ /*
+ * Some unknown error. Hopefully temporary. Just go and
+ * requeue an URB
+ */
+ goto resubmit;
+ }
+
+ /*
+ * Good URB, now process
+ */
+
+ /* PID dependent when we interpret the report */
+ if (inputdev->id.product == PID_1000 ||
+ inputdev->id.product == PID_1001 ||
+ inputdev->id.product == PID_1002) {
+
+ /*
+ * Switch on the report ID
+ * Conveniently, the reports have more information, the higher
+ * the report number. We can just fall through the case
+ * statements if we start with the highest number report
+ */
+ switch (device->buffer[0]) {
+ case 5:
+ /* Pressure is 9 bits */
+ val = ((u16)(device->buffer[8]) << 1);
+ val |= (u16)(device->buffer[7] >> 7);
+ input_report_abs(inputdev, ABS_PRESSURE,
+ device->buffer[8]);
+
+ /* Mask out the Y tilt value used for pressure */
+ device->buffer[7] = (u8)((device->buffer[7]) & 0x7F);
+
+ /* Fall thru */
+ case 4:
+ /* Tilt */
+ input_report_abs(inputdev, ABS_TILT_X,
+ sign_extend32(device->buffer[6], 6));
+
+ input_report_abs(inputdev, ABS_TILT_Y,
+ sign_extend32(device->buffer[7], 6));
+
+ /* Fall thru */
+ case 2:
+ case 3:
+ /* Convert buttons, only 5 bits possible */
+ val = (device->buffer[5]) & MASK_BUTTON;
+
+ /* We don't apply any meaning to the bitmask,
+ just report */
+ input_event(inputdev, EV_MSC, MSC_SERIAL, val);
+
+ /* Fall thru */
+ case 1:
+ /* All reports have X and Y coords in the same place */
+ val = get_unaligned_le16(&device->buffer[1]);
+ input_report_abs(inputdev, ABS_X, val);
+
+ val = get_unaligned_le16(&device->buffer[3]);
+ input_report_abs(inputdev, ABS_Y, val);
+
+ /* Ditto for proximity bit */
+ val = device->buffer[5] & MASK_INRANGE ? 1 : 0;
+ input_report_abs(inputdev, ABS_DISTANCE, val);
+
+ /* Report 1 is an exception to how we handle buttons */
+ /* Buttons are an index, not a bitmask */
+ if (device->buffer[0] == 1) {
+
+ /*
+ * Convert buttons, 5 bit index
+ * Report value of index set as one,
+ * the rest as 0
+ */
+ val = device->buffer[5] & MASK_BUTTON;
+ dev_dbg(&device->intf->dev,
+ "======>>>>>>REPORT 1: val 0x%X(%d)\n",
+ val, val);
+
+ /*
+ * We don't apply any meaning to the button
+ * index, just report it
+ */
+ input_event(inputdev, EV_MSC, MSC_SERIAL, val);
+ }
+ break;
+
+ case 7:
+ /* Menu blocks */
+ input_event(inputdev, EV_MSC, MSC_SCAN,
+ device->buffer[1]);
+ break;
+ }
+ }
+
+ /* Other pid class */
+ if (inputdev->id.product == PID_400 ||
+ inputdev->id.product == PID_401) {
+
+ /* Report 2 */
+ if (device->buffer[0] == 2) {
+ /* Menu blocks */
+ input_event(inputdev, EV_MSC, MSC_SCAN, device->buffer[1]);
+ }
+
+ /* Report 1 */
+ if (device->buffer[0] == 1) {
+ char buttonbyte;
+
+ /* IF X max > 64K, we still a bit from the y report */
+ if (device->max_X > 0x10000) {
+
+ val = (u16)(((u16)(device->buffer[2] << 8)) | (u8)device->buffer[1]);
+ val |= (u32)(((u8)device->buffer[3] & 0x1) << 16);
+
+ input_report_abs(inputdev, ABS_X, val);
+
+ le_buffer[0] = (u8)((u8)(device->buffer[3]) >> 1);
+ le_buffer[0] |= (u8)((device->buffer[3] & 0x1) << 7);
+
+ le_buffer[1] = (u8)(device->buffer[4] >> 1);
+ le_buffer[1] |= (u8)((device->buffer[5] & 0x1) << 7);
+
+ val = get_unaligned_le16(le_buffer);
+ input_report_abs(inputdev, ABS_Y, val);
+
+ /*
+ * Shift the button byte right by one to
+ * make it look like the standard report
+ */
+ buttonbyte = device->buffer[5] >> 1;
+ } else {
+
+ val = get_unaligned_le16(&device->buffer[1]);
+ input_report_abs(inputdev, ABS_X, val);
+
+ val = get_unaligned_le16(&device->buffer[3]);
+ input_report_abs(inputdev, ABS_Y, val);
+
+ buttonbyte = device->buffer[5];
+ }
+
+ /* BUTTONS and PROXIMITY */
+ val = buttonbyte & MASK_INRANGE ? 1 : 0;
+ input_report_abs(inputdev, ABS_DISTANCE, val);
+
+ /* Convert buttons, only 4 bits possible */
+ val = buttonbyte & 0x0F;
+#ifdef USE_BUTTONS
+ for (i = 0; i < 5; i++)
+ input_report_key(inputdev, BTN_DIGI + i, val & (1 << i));
+#else
+ /* We don't apply any meaning to the bitmask, just report */
+ input_event(inputdev, EV_MSC, MSC_SERIAL, val);
+#endif
+
+ /* TRANSDUCER */
+ input_report_abs(inputdev, ABS_MISC, device->buffer[6]);
+ }
+ }
+
+ /* Everybody gets report ID's */
+ input_event(inputdev, EV_MSC, MSC_RAW, device->buffer[0]);
+
+ /* Sync it up */
+ input_sync(inputdev);
+
+ resubmit:
+ rc = usb_submit_urb(urbinfo, GFP_ATOMIC);
+ if (rc != 0)
+ dev_err(&device->intf->dev,
+ "usb_submit_urb failed rc=0x%x\n", rc);
+}
+
+/*
+ * The probe routine. This is called when the kernel find the matching USB
+ * vendor/product. We do the following:
+ *
+ * - Allocate mem for a local structure to manage the device
+ * - Request a HID Report Descriptor from the device and parse it to
+ * find out the device parameters
+ * - Create an input device and assign it attributes
+ * - Allocate an URB so the device can talk to us when the input
+ * queue is open
+ */
+static int gtco_probe(struct usb_interface *usbinterface,
+ const struct usb_device_id *id)
+{
+
+ struct gtco *gtco;
+ struct input_dev *input_dev;
+ struct hid_descriptor *hid_desc;
+ char *report;
+ int result = 0, retry;
+ int error;
+ struct usb_endpoint_descriptor *endpoint;
+
+ /* Allocate memory for device structure */
+ gtco = kzalloc(sizeof(struct gtco), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!gtco || !input_dev) {
+ dev_err(&usbinterface->dev, "No more memory\n");
+ error = -ENOMEM;
+ goto err_free_devs;
+ }
+
+ /* Set pointer to the input device */
+ gtco->inputdevice = input_dev;
+
+ /* Save interface information */
+ gtco->usbdev = interface_to_usbdev(usbinterface);
+ gtco->intf = usbinterface;
+
+ /* Allocate some data for incoming reports */
+ gtco->buffer = usb_alloc_coherent(gtco->usbdev, REPORT_MAX_SIZE,
+ GFP_KERNEL, &gtco->buf_dma);
+ if (!gtco->buffer) {
+ dev_err(&usbinterface->dev, "No more memory for us buffers\n");
+ error = -ENOMEM;
+ goto err_free_devs;
+ }
+
+ /* Allocate URB for reports */
+ gtco->urbinfo = usb_alloc_urb(0, GFP_KERNEL);
+ if (!gtco->urbinfo) {
+ dev_err(&usbinterface->dev, "Failed to allocate URB\n");
+ error = -ENOMEM;
+ goto err_free_buf;
+ }
+
+ /*
+ * The endpoint is always altsetting 0, we know this since we know
+ * this device only has one interrupt endpoint
+ */
+ endpoint = &usbinterface->altsetting[0].endpoint[0].desc;
+
+ /* Some debug */
+ dev_dbg(&usbinterface->dev, "gtco # interfaces: %d\n", usbinterface->num_altsetting);
+ dev_dbg(&usbinterface->dev, "num endpoints: %d\n", usbinterface->cur_altsetting->desc.bNumEndpoints);
+ dev_dbg(&usbinterface->dev, "interface class: %d\n", usbinterface->cur_altsetting->desc.bInterfaceClass);
+ dev_dbg(&usbinterface->dev, "endpoint: attribute:0x%x type:0x%x\n", endpoint->bmAttributes, endpoint->bDescriptorType);
+ if (usb_endpoint_xfer_int(endpoint))
+ dev_dbg(&usbinterface->dev, "endpoint: we have interrupt endpoint\n");
+
+ dev_dbg(&usbinterface->dev, "endpoint extra len:%d\n", usbinterface->altsetting[0].extralen);
+
+ /*
+ * Find the HID descriptor so we can find out the size of the
+ * HID report descriptor
+ */
+ if (usb_get_extra_descriptor(usbinterface->cur_altsetting,
+ HID_DEVICE_TYPE, &hid_desc) != 0){
+ dev_err(&usbinterface->dev,
+ "Can't retrieve exta USB descriptor to get hid report descriptor length\n");
+ error = -EIO;
+ goto err_free_urb;
+ }
+
+ dev_dbg(&usbinterface->dev,
+ "Extra descriptor success: type:%d len:%d\n",
+ hid_desc->bDescriptorType, hid_desc->wDescriptorLength);
+
+ report = kzalloc(le16_to_cpu(hid_desc->wDescriptorLength), GFP_KERNEL);
+ if (!report) {
+ dev_err(&usbinterface->dev, "No more memory for report\n");
+ error = -ENOMEM;
+ goto err_free_urb;
+ }
+
+ /* Couple of tries to get reply */
+ for (retry = 0; retry < 3; retry++) {
+ result = usb_control_msg(gtco->usbdev,
+ usb_rcvctrlpipe(gtco->usbdev, 0),
+ USB_REQ_GET_DESCRIPTOR,
+ USB_RECIP_INTERFACE | USB_DIR_IN,
+ REPORT_DEVICE_TYPE << 8,
+ 0, /* interface */
+ report,
+ le16_to_cpu(hid_desc->wDescriptorLength),
+ 5000); /* 5 secs */
+
+ dev_dbg(&usbinterface->dev, "usb_control_msg result: %d\n", result);
+ if (result == le16_to_cpu(hid_desc->wDescriptorLength)) {
+ parse_hid_report_descriptor(gtco, report, result);
+ break;
+ }
+ }
+
+ kfree(report);
+
+ /* If we didn't get the report, fail */
+ if (result != le16_to_cpu(hid_desc->wDescriptorLength)) {
+ dev_err(&usbinterface->dev,
+ "Failed to get HID Report Descriptor of size: %d\n",
+ hid_desc->wDescriptorLength);
+ error = -EIO;
+ goto err_free_urb;
+ }
+
+ /* Create a device file node */
+ usb_make_path(gtco->usbdev, gtco->usbpath, sizeof(gtco->usbpath));
+ strlcat(gtco->usbpath, "/input0", sizeof(gtco->usbpath));
+
+ /* Set Input device functions */
+ input_dev->open = gtco_input_open;
+ input_dev->close = gtco_input_close;
+
+ /* Set input device information */
+ input_dev->name = "GTCO_CalComp";
+ input_dev->phys = gtco->usbpath;
+
+ input_set_drvdata(input_dev, gtco);
+
+ /* Now set up all the input device capabilities */
+ gtco_setup_caps(input_dev);
+
+ /* Set input device required ID information */
+ usb_to_input_id(gtco->usbdev, &input_dev->id);
+ input_dev->dev.parent = &usbinterface->dev;
+
+ /* Setup the URB, it will be posted later on open of input device */
+ endpoint = &usbinterface->altsetting[0].endpoint[0].desc;
+
+ usb_fill_int_urb(gtco->urbinfo,
+ gtco->usbdev,
+ usb_rcvintpipe(gtco->usbdev,
+ endpoint->bEndpointAddress),
+ gtco->buffer,
+ REPORT_MAX_SIZE,
+ gtco_urb_callback,
+ gtco,
+ endpoint->bInterval);
+
+ gtco->urbinfo->transfer_dma = gtco->buf_dma;
+ gtco->urbinfo->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+ /* Save gtco pointer in USB interface gtco */
+ usb_set_intfdata(usbinterface, gtco);
+
+ /* All done, now register the input device */
+ error = input_register_device(input_dev);
+ if (error)
+ goto err_free_urb;
+
+ return 0;
+
+ err_free_urb:
+ usb_free_urb(gtco->urbinfo);
+ err_free_buf:
+ usb_free_coherent(gtco->usbdev, REPORT_MAX_SIZE,
+ gtco->buffer, gtco->buf_dma);
+ err_free_devs:
+ input_free_device(input_dev);
+ kfree(gtco);
+ return error;
+}
+
+/*
+ * This function is a standard USB function called when the USB device
+ * is disconnected. We will get rid of the URV, de-register the input
+ * device, and free up allocated memory
+ */
+static void gtco_disconnect(struct usb_interface *interface)
+{
+ /* Grab private device ptr */
+ struct gtco *gtco = usb_get_intfdata(interface);
+
+ /* Now reverse all the registration stuff */
+ if (gtco) {
+ input_unregister_device(gtco->inputdevice);
+ usb_kill_urb(gtco->urbinfo);
+ usb_free_urb(gtco->urbinfo);
+ usb_free_coherent(gtco->usbdev, REPORT_MAX_SIZE,
+ gtco->buffer, gtco->buf_dma);
+ kfree(gtco);
+ }
+
+ dev_info(&interface->dev, "gtco driver disconnected\n");
+}
+
+/* STANDARD MODULE LOAD ROUTINES */
+
+static struct usb_driver gtco_driverinfo_table = {
+ .name = "gtco",
+ .id_table = gtco_usbid_table,
+ .probe = gtco_probe,
+ .disconnect = gtco_disconnect,
+};
+
+module_usb_driver(gtco_driverinfo_table);
+
+MODULE_DESCRIPTION("GTCO digitizer USB driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/tablet/hanwang.c b/drivers/input/tablet/hanwang.c
new file mode 100644
index 000000000..cd852059b
--- /dev/null
+++ b/drivers/input/tablet/hanwang.c
@@ -0,0 +1,461 @@
+/*
+ * USB Hanwang tablet support
+ *
+ * Copyright (c) 2010 Xing Wei <weixing@hanwang.com.cn>
+ *
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/usb/input.h>
+
+#define DRIVER_AUTHOR "Xing Wei <weixing@hanwang.com.cn>"
+#define DRIVER_DESC "USB Hanwang tablet driver"
+#define DRIVER_LICENSE "GPL"
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE(DRIVER_LICENSE);
+
+#define USB_VENDOR_ID_HANWANG 0x0b57
+#define HANWANG_TABLET_INT_CLASS 0x0003
+#define HANWANG_TABLET_INT_SUB_CLASS 0x0001
+#define HANWANG_TABLET_INT_PROTOCOL 0x0002
+
+#define ART_MASTER_PKGLEN_MAX 10
+
+/* device IDs */
+#define STYLUS_DEVICE_ID 0x02
+#define TOUCH_DEVICE_ID 0x03
+#define CURSOR_DEVICE_ID 0x06
+#define ERASER_DEVICE_ID 0x0A
+#define PAD_DEVICE_ID 0x0F
+
+/* match vendor and interface info */
+#define HANWANG_TABLET_DEVICE(vend, cl, sc, pr) \
+ .match_flags = USB_DEVICE_ID_MATCH_VENDOR \
+ | USB_DEVICE_ID_MATCH_INT_INFO, \
+ .idVendor = (vend), \
+ .bInterfaceClass = (cl), \
+ .bInterfaceSubClass = (sc), \
+ .bInterfaceProtocol = (pr)
+
+enum hanwang_tablet_type {
+ HANWANG_ART_MASTER_III,
+ HANWANG_ART_MASTER_HD,
+ HANWANG_ART_MASTER_II,
+};
+
+struct hanwang {
+ unsigned char *data;
+ dma_addr_t data_dma;
+ struct input_dev *dev;
+ struct usb_device *usbdev;
+ struct urb *irq;
+ const struct hanwang_features *features;
+ unsigned int current_tool;
+ unsigned int current_id;
+ char name[64];
+ char phys[32];
+};
+
+struct hanwang_features {
+ unsigned short pid;
+ char *name;
+ enum hanwang_tablet_type type;
+ int pkg_len;
+ int max_x;
+ int max_y;
+ int max_tilt_x;
+ int max_tilt_y;
+ int max_pressure;
+};
+
+static const struct hanwang_features features_array[] = {
+ { 0x8528, "Hanwang Art Master III 0906", HANWANG_ART_MASTER_III,
+ ART_MASTER_PKGLEN_MAX, 0x5757, 0x3692, 0x3f, 0x7f, 2048 },
+ { 0x8529, "Hanwang Art Master III 0604", HANWANG_ART_MASTER_III,
+ ART_MASTER_PKGLEN_MAX, 0x3d84, 0x2672, 0x3f, 0x7f, 2048 },
+ { 0x852a, "Hanwang Art Master III 1308", HANWANG_ART_MASTER_III,
+ ART_MASTER_PKGLEN_MAX, 0x7f00, 0x4f60, 0x3f, 0x7f, 2048 },
+ { 0x8401, "Hanwang Art Master HD 5012", HANWANG_ART_MASTER_HD,
+ ART_MASTER_PKGLEN_MAX, 0x678e, 0x4150, 0x3f, 0x7f, 1024 },
+ { 0x8503, "Hanwang Art Master II", HANWANG_ART_MASTER_II,
+ ART_MASTER_PKGLEN_MAX, 0x27de, 0x1cfe, 0x3f, 0x7f, 1024 },
+};
+
+static const int hw_eventtypes[] = {
+ EV_KEY, EV_ABS, EV_MSC,
+};
+
+static const int hw_absevents[] = {
+ ABS_X, ABS_Y, ABS_TILT_X, ABS_TILT_Y, ABS_WHEEL,
+ ABS_RX, ABS_RY, ABS_PRESSURE, ABS_MISC,
+};
+
+static const int hw_btnevents[] = {
+ BTN_STYLUS, BTN_STYLUS2, BTN_TOOL_PEN, BTN_TOOL_RUBBER,
+ BTN_TOOL_MOUSE, BTN_TOOL_FINGER,
+ BTN_0, BTN_1, BTN_2, BTN_3, BTN_4, BTN_5, BTN_6, BTN_7, BTN_8,
+};
+
+static const int hw_mscevents[] = {
+ MSC_SERIAL,
+};
+
+static void hanwang_parse_packet(struct hanwang *hanwang)
+{
+ unsigned char *data = hanwang->data;
+ struct input_dev *input_dev = hanwang->dev;
+ struct usb_device *dev = hanwang->usbdev;
+ enum hanwang_tablet_type type = hanwang->features->type;
+ int i;
+ u16 p;
+
+ if (type == HANWANG_ART_MASTER_II) {
+ hanwang->current_tool = BTN_TOOL_PEN;
+ hanwang->current_id = STYLUS_DEVICE_ID;
+ }
+
+ switch (data[0]) {
+ case 0x02: /* data packet */
+ switch (data[1]) {
+ case 0x80: /* tool prox out */
+ if (type != HANWANG_ART_MASTER_II) {
+ hanwang->current_id = 0;
+ input_report_key(input_dev,
+ hanwang->current_tool, 0);
+ }
+ break;
+
+ case 0x00: /* artmaster ii pen leave */
+ if (type == HANWANG_ART_MASTER_II) {
+ hanwang->current_id = 0;
+ input_report_key(input_dev,
+ hanwang->current_tool, 0);
+ }
+ break;
+
+ case 0xc2: /* first time tool prox in */
+ switch (data[3] & 0xf0) {
+ case 0x20: /* art_master III */
+ case 0x30: /* art_master_HD */
+ hanwang->current_id = STYLUS_DEVICE_ID;
+ hanwang->current_tool = BTN_TOOL_PEN;
+ input_report_key(input_dev, BTN_TOOL_PEN, 1);
+ break;
+ case 0xa0: /* art_master III */
+ case 0xb0: /* art_master_HD */
+ hanwang->current_id = ERASER_DEVICE_ID;
+ hanwang->current_tool = BTN_TOOL_RUBBER;
+ input_report_key(input_dev, BTN_TOOL_RUBBER, 1);
+ break;
+ default:
+ hanwang->current_id = 0;
+ dev_dbg(&dev->dev,
+ "unknown tablet tool %02x\n", data[0]);
+ break;
+ }
+ break;
+
+ default: /* tool data packet */
+ switch (type) {
+ case HANWANG_ART_MASTER_III:
+ p = (data[6] << 3) |
+ ((data[7] & 0xc0) >> 5) |
+ (data[1] & 0x01);
+ break;
+
+ case HANWANG_ART_MASTER_HD:
+ case HANWANG_ART_MASTER_II:
+ p = (data[7] >> 6) | (data[6] << 2);
+ break;
+
+ default:
+ p = 0;
+ break;
+ }
+
+ input_report_abs(input_dev, ABS_X,
+ be16_to_cpup((__be16 *)&data[2]));
+ input_report_abs(input_dev, ABS_Y,
+ be16_to_cpup((__be16 *)&data[4]));
+ input_report_abs(input_dev, ABS_PRESSURE, p);
+ input_report_abs(input_dev, ABS_TILT_X, data[7] & 0x3f);
+ input_report_abs(input_dev, ABS_TILT_Y, data[8] & 0x7f);
+ input_report_key(input_dev, BTN_STYLUS, data[1] & 0x02);
+
+ if (type != HANWANG_ART_MASTER_II)
+ input_report_key(input_dev, BTN_STYLUS2,
+ data[1] & 0x04);
+ else
+ input_report_key(input_dev, BTN_TOOL_PEN, 1);
+
+ break;
+ }
+
+ input_report_abs(input_dev, ABS_MISC, hanwang->current_id);
+ input_event(input_dev, EV_MSC, MSC_SERIAL,
+ hanwang->features->pid);
+ break;
+
+ case 0x0c:
+ /* roll wheel */
+ hanwang->current_id = PAD_DEVICE_ID;
+
+ switch (type) {
+ case HANWANG_ART_MASTER_III:
+ input_report_key(input_dev, BTN_TOOL_FINGER,
+ data[1] || data[2] || data[3]);
+ input_report_abs(input_dev, ABS_WHEEL, data[1]);
+ input_report_key(input_dev, BTN_0, data[2]);
+ for (i = 0; i < 8; i++)
+ input_report_key(input_dev,
+ BTN_1 + i, data[3] & (1 << i));
+ break;
+
+ case HANWANG_ART_MASTER_HD:
+ input_report_key(input_dev, BTN_TOOL_FINGER, data[1] ||
+ data[2] || data[3] || data[4] ||
+ data[5] || data[6]);
+ input_report_abs(input_dev, ABS_RX,
+ ((data[1] & 0x1f) << 8) | data[2]);
+ input_report_abs(input_dev, ABS_RY,
+ ((data[3] & 0x1f) << 8) | data[4]);
+ input_report_key(input_dev, BTN_0, data[5] & 0x01);
+ for (i = 0; i < 4; i++) {
+ input_report_key(input_dev,
+ BTN_1 + i, data[5] & (1 << i));
+ input_report_key(input_dev,
+ BTN_5 + i, data[6] & (1 << i));
+ }
+ break;
+
+ case HANWANG_ART_MASTER_II:
+ dev_dbg(&dev->dev, "error packet %02x\n", data[0]);
+ return;
+ }
+
+ input_report_abs(input_dev, ABS_MISC, hanwang->current_id);
+ input_event(input_dev, EV_MSC, MSC_SERIAL, 0xffffffff);
+ break;
+
+ default:
+ dev_dbg(&dev->dev, "error packet %02x\n", data[0]);
+ break;
+ }
+
+ input_sync(input_dev);
+}
+
+static void hanwang_irq(struct urb *urb)
+{
+ struct hanwang *hanwang = urb->context;
+ struct usb_device *dev = hanwang->usbdev;
+ int retval;
+
+ switch (urb->status) {
+ case 0:
+ /* success */;
+ hanwang_parse_packet(hanwang);
+ break;
+ case -ECONNRESET:
+ case -ENOENT:
+ case -ESHUTDOWN:
+ /* this urb is terminated, clean up */
+ dev_err(&dev->dev, "%s - urb shutting down with status: %d",
+ __func__, urb->status);
+ return;
+ default:
+ dev_err(&dev->dev, "%s - nonzero urb status received: %d",
+ __func__, urb->status);
+ break;
+ }
+
+ retval = usb_submit_urb(urb, GFP_ATOMIC);
+ if (retval)
+ dev_err(&dev->dev, "%s - usb_submit_urb failed with result %d",
+ __func__, retval);
+}
+
+static int hanwang_open(struct input_dev *dev)
+{
+ struct hanwang *hanwang = input_get_drvdata(dev);
+
+ hanwang->irq->dev = hanwang->usbdev;
+ if (usb_submit_urb(hanwang->irq, GFP_KERNEL))
+ return -EIO;
+
+ return 0;
+}
+
+static void hanwang_close(struct input_dev *dev)
+{
+ struct hanwang *hanwang = input_get_drvdata(dev);
+
+ usb_kill_urb(hanwang->irq);
+}
+
+static bool get_features(struct usb_device *dev, struct hanwang *hanwang)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(features_array); i++) {
+ if (le16_to_cpu(dev->descriptor.idProduct) ==
+ features_array[i].pid) {
+ hanwang->features = &features_array[i];
+ return true;
+ }
+ }
+
+ return false;
+}
+
+
+static int hanwang_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+ struct usb_device *dev = interface_to_usbdev(intf);
+ struct usb_endpoint_descriptor *endpoint;
+ struct hanwang *hanwang;
+ struct input_dev *input_dev;
+ int error;
+ int i;
+
+ hanwang = kzalloc(sizeof(struct hanwang), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!hanwang || !input_dev) {
+ error = -ENOMEM;
+ goto fail1;
+ }
+
+ if (!get_features(dev, hanwang)) {
+ error = -ENXIO;
+ goto fail1;
+ }
+
+ hanwang->data = usb_alloc_coherent(dev, hanwang->features->pkg_len,
+ GFP_KERNEL, &hanwang->data_dma);
+ if (!hanwang->data) {
+ error = -ENOMEM;
+ goto fail1;
+ }
+
+ hanwang->irq = usb_alloc_urb(0, GFP_KERNEL);
+ if (!hanwang->irq) {
+ error = -ENOMEM;
+ goto fail2;
+ }
+
+ hanwang->usbdev = dev;
+ hanwang->dev = input_dev;
+
+ usb_make_path(dev, hanwang->phys, sizeof(hanwang->phys));
+ strlcat(hanwang->phys, "/input0", sizeof(hanwang->phys));
+
+ strlcpy(hanwang->name, hanwang->features->name, sizeof(hanwang->name));
+ input_dev->name = hanwang->name;
+ input_dev->phys = hanwang->phys;
+ usb_to_input_id(dev, &input_dev->id);
+ input_dev->dev.parent = &intf->dev;
+
+ input_set_drvdata(input_dev, hanwang);
+
+ input_dev->open = hanwang_open;
+ input_dev->close = hanwang_close;
+
+ for (i = 0; i < ARRAY_SIZE(hw_eventtypes); ++i)
+ __set_bit(hw_eventtypes[i], input_dev->evbit);
+
+ for (i = 0; i < ARRAY_SIZE(hw_absevents); ++i)
+ __set_bit(hw_absevents[i], input_dev->absbit);
+
+ for (i = 0; i < ARRAY_SIZE(hw_btnevents); ++i)
+ __set_bit(hw_btnevents[i], input_dev->keybit);
+
+ for (i = 0; i < ARRAY_SIZE(hw_mscevents); ++i)
+ __set_bit(hw_mscevents[i], input_dev->mscbit);
+
+ input_set_abs_params(input_dev, ABS_X,
+ 0, hanwang->features->max_x, 4, 0);
+ input_set_abs_params(input_dev, ABS_Y,
+ 0, hanwang->features->max_y, 4, 0);
+ input_set_abs_params(input_dev, ABS_TILT_X,
+ 0, hanwang->features->max_tilt_x, 0, 0);
+ input_set_abs_params(input_dev, ABS_TILT_Y,
+ 0, hanwang->features->max_tilt_y, 0, 0);
+ input_set_abs_params(input_dev, ABS_PRESSURE,
+ 0, hanwang->features->max_pressure, 0, 0);
+
+ endpoint = &intf->cur_altsetting->endpoint[0].desc;
+ usb_fill_int_urb(hanwang->irq, dev,
+ usb_rcvintpipe(dev, endpoint->bEndpointAddress),
+ hanwang->data, hanwang->features->pkg_len,
+ hanwang_irq, hanwang, endpoint->bInterval);
+ hanwang->irq->transfer_dma = hanwang->data_dma;
+ hanwang->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+ error = input_register_device(hanwang->dev);
+ if (error)
+ goto fail3;
+
+ usb_set_intfdata(intf, hanwang);
+
+ return 0;
+
+ fail3: usb_free_urb(hanwang->irq);
+ fail2: usb_free_coherent(dev, hanwang->features->pkg_len,
+ hanwang->data, hanwang->data_dma);
+ fail1: input_free_device(input_dev);
+ kfree(hanwang);
+ return error;
+
+}
+
+static void hanwang_disconnect(struct usb_interface *intf)
+{
+ struct hanwang *hanwang = usb_get_intfdata(intf);
+
+ input_unregister_device(hanwang->dev);
+ usb_free_urb(hanwang->irq);
+ usb_free_coherent(interface_to_usbdev(intf),
+ hanwang->features->pkg_len, hanwang->data,
+ hanwang->data_dma);
+ kfree(hanwang);
+ usb_set_intfdata(intf, NULL);
+}
+
+static const struct usb_device_id hanwang_ids[] = {
+ { HANWANG_TABLET_DEVICE(USB_VENDOR_ID_HANWANG, HANWANG_TABLET_INT_CLASS,
+ HANWANG_TABLET_INT_SUB_CLASS, HANWANG_TABLET_INT_PROTOCOL) },
+ {}
+};
+
+MODULE_DEVICE_TABLE(usb, hanwang_ids);
+
+static struct usb_driver hanwang_driver = {
+ .name = "hanwang",
+ .probe = hanwang_probe,
+ .disconnect = hanwang_disconnect,
+ .id_table = hanwang_ids,
+};
+
+module_usb_driver(hanwang_driver);
diff --git a/drivers/input/tablet/kbtab.c b/drivers/input/tablet/kbtab.c
new file mode 100644
index 000000000..d2ac7c2b5
--- /dev/null
+++ b/drivers/input/tablet/kbtab.c
@@ -0,0 +1,207 @@
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/usb/input.h>
+#include <asm/unaligned.h>
+
+/*
+ * Version Information
+ * v0.0.1 - Original, extremely basic version, 2.4.xx only
+ * v0.0.2 - Updated, works with 2.5.62 and 2.4.20;
+ * - added pressure-threshold modules param code from
+ * Alex Perry <alex.perry@ieee.org>
+ */
+
+#define DRIVER_VERSION "v0.0.2"
+#define DRIVER_AUTHOR "Josh Myer <josh@joshisanerd.com>"
+#define DRIVER_DESC "USB KB Gear JamStudio Tablet driver"
+#define DRIVER_LICENSE "GPL"
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE(DRIVER_LICENSE);
+
+#define USB_VENDOR_ID_KBGEAR 0x084e
+
+static int kb_pressure_click = 0x10;
+module_param(kb_pressure_click, int, 0);
+MODULE_PARM_DESC(kb_pressure_click, "pressure threshold for clicks");
+
+struct kbtab {
+ unsigned char *data;
+ dma_addr_t data_dma;
+ struct input_dev *dev;
+ struct usb_device *usbdev;
+ struct usb_interface *intf;
+ struct urb *irq;
+ char phys[32];
+};
+
+static void kbtab_irq(struct urb *urb)
+{
+ struct kbtab *kbtab = urb->context;
+ unsigned char *data = kbtab->data;
+ struct input_dev *dev = kbtab->dev;
+ int pressure;
+ int retval;
+
+ switch (urb->status) {
+ case 0:
+ /* success */
+ break;
+ case -ECONNRESET:
+ case -ENOENT:
+ case -ESHUTDOWN:
+ /* this urb is terminated, clean up */
+ dev_dbg(&kbtab->intf->dev,
+ "%s - urb shutting down with status: %d\n",
+ __func__, urb->status);
+ return;
+ default:
+ dev_dbg(&kbtab->intf->dev,
+ "%s - nonzero urb status received: %d\n",
+ __func__, urb->status);
+ goto exit;
+ }
+
+
+ input_report_key(dev, BTN_TOOL_PEN, 1);
+
+ input_report_abs(dev, ABS_X, get_unaligned_le16(&data[1]));
+ input_report_abs(dev, ABS_Y, get_unaligned_le16(&data[3]));
+
+ /*input_report_key(dev, BTN_TOUCH , data[0] & 0x01);*/
+ input_report_key(dev, BTN_RIGHT, data[0] & 0x02);
+
+ pressure = data[5];
+ if (kb_pressure_click == -1)
+ input_report_abs(dev, ABS_PRESSURE, pressure);
+ else
+ input_report_key(dev, BTN_LEFT, pressure > kb_pressure_click ? 1 : 0);
+
+ input_sync(dev);
+
+ exit:
+ retval = usb_submit_urb(urb, GFP_ATOMIC);
+ if (retval)
+ dev_err(&kbtab->intf->dev,
+ "%s - usb_submit_urb failed with result %d\n",
+ __func__, retval);
+}
+
+static struct usb_device_id kbtab_ids[] = {
+ { USB_DEVICE(USB_VENDOR_ID_KBGEAR, 0x1001), .driver_info = 0 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(usb, kbtab_ids);
+
+static int kbtab_open(struct input_dev *dev)
+{
+ struct kbtab *kbtab = input_get_drvdata(dev);
+
+ kbtab->irq->dev = kbtab->usbdev;
+ if (usb_submit_urb(kbtab->irq, GFP_KERNEL))
+ return -EIO;
+
+ return 0;
+}
+
+static void kbtab_close(struct input_dev *dev)
+{
+ struct kbtab *kbtab = input_get_drvdata(dev);
+
+ usb_kill_urb(kbtab->irq);
+}
+
+static int kbtab_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+ struct usb_device *dev = interface_to_usbdev(intf);
+ struct usb_endpoint_descriptor *endpoint;
+ struct kbtab *kbtab;
+ struct input_dev *input_dev;
+ int error = -ENOMEM;
+
+ kbtab = kzalloc(sizeof(struct kbtab), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!kbtab || !input_dev)
+ goto fail1;
+
+ kbtab->data = usb_alloc_coherent(dev, 8, GFP_KERNEL, &kbtab->data_dma);
+ if (!kbtab->data)
+ goto fail1;
+
+ kbtab->irq = usb_alloc_urb(0, GFP_KERNEL);
+ if (!kbtab->irq)
+ goto fail2;
+
+ kbtab->usbdev = dev;
+ kbtab->intf = intf;
+ kbtab->dev = input_dev;
+
+ usb_make_path(dev, kbtab->phys, sizeof(kbtab->phys));
+ strlcat(kbtab->phys, "/input0", sizeof(kbtab->phys));
+
+ input_dev->name = "KB Gear Tablet";
+ input_dev->phys = kbtab->phys;
+ usb_to_input_id(dev, &input_dev->id);
+ input_dev->dev.parent = &intf->dev;
+
+ input_set_drvdata(input_dev, kbtab);
+
+ input_dev->open = kbtab_open;
+ input_dev->close = kbtab_close;
+
+ input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+ input_dev->keybit[BIT_WORD(BTN_LEFT)] |=
+ BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_RIGHT);
+ input_dev->keybit[BIT_WORD(BTN_DIGI)] |=
+ BIT_MASK(BTN_TOOL_PEN) | BIT_MASK(BTN_TOUCH);
+ input_set_abs_params(input_dev, ABS_X, 0, 0x2000, 4, 0);
+ input_set_abs_params(input_dev, ABS_Y, 0, 0x1750, 4, 0);
+ input_set_abs_params(input_dev, ABS_PRESSURE, 0, 0xff, 0, 0);
+
+ endpoint = &intf->cur_altsetting->endpoint[0].desc;
+
+ usb_fill_int_urb(kbtab->irq, dev,
+ usb_rcvintpipe(dev, endpoint->bEndpointAddress),
+ kbtab->data, 8,
+ kbtab_irq, kbtab, endpoint->bInterval);
+ kbtab->irq->transfer_dma = kbtab->data_dma;
+ kbtab->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+ error = input_register_device(kbtab->dev);
+ if (error)
+ goto fail3;
+
+ usb_set_intfdata(intf, kbtab);
+
+ return 0;
+
+ fail3: usb_free_urb(kbtab->irq);
+ fail2: usb_free_coherent(dev, 8, kbtab->data, kbtab->data_dma);
+ fail1: input_free_device(input_dev);
+ kfree(kbtab);
+ return error;
+}
+
+static void kbtab_disconnect(struct usb_interface *intf)
+{
+ struct kbtab *kbtab = usb_get_intfdata(intf);
+
+ usb_set_intfdata(intf, NULL);
+
+ input_unregister_device(kbtab->dev);
+ usb_free_urb(kbtab->irq);
+ usb_free_coherent(kbtab->usbdev, 8, kbtab->data, kbtab->data_dma);
+ kfree(kbtab);
+}
+
+static struct usb_driver kbtab_driver = {
+ .name = "kbtab",
+ .probe = kbtab_probe,
+ .disconnect = kbtab_disconnect,
+ .id_table = kbtab_ids,
+};
+
+module_usb_driver(kbtab_driver);
diff --git a/drivers/input/tablet/wacom_serial4.c b/drivers/input/tablet/wacom_serial4.c
new file mode 100644
index 000000000..20ab80246
--- /dev/null
+++ b/drivers/input/tablet/wacom_serial4.c
@@ -0,0 +1,620 @@
+/*
+ * Wacom protocol 4 serial tablet driver
+ *
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ * Copyright 2011-2012 Julian Squires <julian@cipht.net>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version of 2 of the License, or (at your
+ * option) any later version. See the file COPYING in the main directory of
+ * this archive for more details.
+ *
+ * Many thanks to Bill Seremetis, without whom PenPartner support
+ * would not have been possible. Thanks to Patrick Mahoney.
+ *
+ * This driver was developed with reference to much code written by others,
+ * particularly:
+ * - elo, gunze drivers by Vojtech Pavlik <vojtech@ucw.cz>;
+ * - wacom_w8001 driver by Jaya Kumar <jayakumar.lkml@gmail.com>;
+ * - the USB wacom input driver, credited to many people
+ * (see drivers/input/tablet/wacom.h);
+ * - new and old versions of linuxwacom / xf86-input-wacom credited to
+ * Frederic Lepied, France. <Lepied@XFree86.org> and
+ * Ping Cheng, Wacom. <pingc@wacom.com>;
+ * - and xf86wacom.c (a presumably ancient version of the linuxwacom code),
+ * by Frederic Lepied and Raph Levien <raph@gtk.org>.
+ *
+ * To do:
+ * - support pad buttons; (requires access to a model with pad buttons)
+ * - support (protocol 4-style) tilt (requires access to a > 1.4 rom model)
+ */
+
+/*
+ * Wacom serial protocol 4 documentation taken from linuxwacom-0.9.9 code,
+ * protocol 4 uses 7 or 9 byte of data in the following format:
+ *
+ * Byte 1
+ * bit 7 Sync bit always 1
+ * bit 6 Pointing device detected
+ * bit 5 Cursor = 0 / Stylus = 1
+ * bit 4 Reserved
+ * bit 3 1 if a button on the pointing device has been pressed
+ * bit 2 P0 (optional)
+ * bit 1 X15
+ * bit 0 X14
+ *
+ * Byte 2
+ * bit 7 Always 0
+ * bits 6-0 = X13 - X7
+ *
+ * Byte 3
+ * bit 7 Always 0
+ * bits 6-0 = X6 - X0
+ *
+ * Byte 4
+ * bit 7 Always 0
+ * bit 6 B3
+ * bit 5 B2
+ * bit 4 B1
+ * bit 3 B0
+ * bit 2 P1 (optional)
+ * bit 1 Y15
+ * bit 0 Y14
+ *
+ * Byte 5
+ * bit 7 Always 0
+ * bits 6-0 = Y13 - Y7
+ *
+ * Byte 6
+ * bit 7 Always 0
+ * bits 6-0 = Y6 - Y0
+ *
+ * Byte 7
+ * bit 7 Always 0
+ * bit 6 Sign of pressure data; or wheel-rel for cursor tool
+ * bit 5 P7; or REL1 for cursor tool
+ * bit 4 P6; or REL0 for cursor tool
+ * bit 3 P5
+ * bit 2 P4
+ * bit 1 P3
+ * bit 0 P2
+ *
+ * byte 8 and 9 are optional and present only
+ * in tilt mode.
+ *
+ * Byte 8
+ * bit 7 Always 0
+ * bit 6 Sign of tilt X
+ * bit 5 Xt6
+ * bit 4 Xt5
+ * bit 3 Xt4
+ * bit 2 Xt3
+ * bit 1 Xt2
+ * bit 0 Xt1
+ *
+ * Byte 9
+ * bit 7 Always 0
+ * bit 6 Sign of tilt Y
+ * bit 5 Yt6
+ * bit 4 Yt5
+ * bit 3 Yt4
+ * bit 2 Yt3
+ * bit 1 Yt2
+ * bit 0 Yt1
+ */
+
+#include <linux/completion.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/serio.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+
+MODULE_AUTHOR("Julian Squires <julian@cipht.net>, Hans de Goede <hdegoede@redhat.com>");
+MODULE_DESCRIPTION("Wacom protocol 4 serial tablet driver");
+MODULE_LICENSE("GPL");
+
+#define REQUEST_MODEL_AND_ROM_VERSION "~#"
+#define REQUEST_MAX_COORDINATES "~C\r"
+#define REQUEST_CONFIGURATION_STRING "~R\r"
+#define REQUEST_RESET_TO_PROTOCOL_IV "\r#"
+/*
+ * Note: sending "\r$\r" causes at least the Digitizer II to send
+ * packets in ASCII instead of binary. "\r#" seems to undo that.
+ */
+
+#define COMMAND_START_SENDING_PACKETS "ST\r"
+#define COMMAND_STOP_SENDING_PACKETS "SP\r"
+#define COMMAND_MULTI_MODE_INPUT "MU1\r"
+#define COMMAND_ORIGIN_IN_UPPER_LEFT "OC1\r"
+#define COMMAND_ENABLE_ALL_MACRO_BUTTONS "~M0\r"
+#define COMMAND_DISABLE_GROUP_1_MACRO_BUTTONS "~M1\r"
+#define COMMAND_TRANSMIT_AT_MAX_RATE "IT0\r"
+#define COMMAND_DISABLE_INCREMENTAL_MODE "IN0\r"
+#define COMMAND_ENABLE_CONTINUOUS_MODE "SR\r"
+#define COMMAND_ENABLE_PRESSURE_MODE "PH1\r"
+#define COMMAND_Z_FILTER "ZF1\r"
+
+/* Note that this is a protocol 4 packet without tilt information. */
+#define PACKET_LENGTH 7
+#define DATA_SIZE 32
+
+/* flags */
+#define F_COVERS_SCREEN 0x01
+#define F_HAS_STYLUS2 0x02
+#define F_HAS_SCROLLWHEEL 0x04
+
+/* device IDs */
+#define STYLUS_DEVICE_ID 0x02
+#define CURSOR_DEVICE_ID 0x06
+#define ERASER_DEVICE_ID 0x0A
+
+enum { STYLUS = 1, ERASER, CURSOR };
+
+static const struct {
+ int device_id;
+ int input_id;
+} tools[] = {
+ { 0, 0 },
+ { STYLUS_DEVICE_ID, BTN_TOOL_PEN },
+ { ERASER_DEVICE_ID, BTN_TOOL_RUBBER },
+ { CURSOR_DEVICE_ID, BTN_TOOL_MOUSE },
+};
+
+struct wacom {
+ struct input_dev *dev;
+ struct completion cmd_done;
+ int result;
+ u8 expect;
+ u8 eraser_mask;
+ unsigned int extra_z_bits;
+ unsigned int flags;
+ unsigned int res_x, res_y;
+ unsigned int max_x, max_y;
+ unsigned int tool;
+ unsigned int idx;
+ u8 data[DATA_SIZE];
+ char phys[32];
+};
+
+enum {
+ MODEL_CINTIQ = 0x504C, /* PL */
+ MODEL_CINTIQ2 = 0x4454, /* DT */
+ MODEL_DIGITIZER_II = 0x5544, /* UD */
+ MODEL_GRAPHIRE = 0x4554, /* ET */
+ MODEL_PENPARTNER = 0x4354, /* CT */
+};
+
+static void wacom_handle_model_response(struct wacom *wacom)
+{
+ int major_v, minor_v, r = 0;
+ char *p;
+
+ p = strrchr(wacom->data, 'V');
+ if (p)
+ r = sscanf(p + 1, "%u.%u", &major_v, &minor_v);
+ if (r != 2)
+ major_v = minor_v = 0;
+
+ switch (wacom->data[2] << 8 | wacom->data[3]) {
+ case MODEL_CINTIQ: /* UNTESTED */
+ case MODEL_CINTIQ2:
+ if ((wacom->data[2] << 8 | wacom->data[3]) == MODEL_CINTIQ) {
+ wacom->dev->name = "Wacom Cintiq";
+ wacom->dev->id.version = MODEL_CINTIQ;
+ } else {
+ wacom->dev->name = "Wacom Cintiq II";
+ wacom->dev->id.version = MODEL_CINTIQ2;
+ }
+ wacom->res_x = 508;
+ wacom->res_y = 508;
+
+ switch (wacom->data[5] << 8 | wacom->data[6]) {
+ case 0x3731: /* PL-710 */
+ wacom->res_x = 2540;
+ wacom->res_y = 2540;
+ /* fall through */
+ case 0x3535: /* PL-550 */
+ case 0x3830: /* PL-800 */
+ wacom->extra_z_bits = 2;
+ }
+
+ wacom->flags = F_COVERS_SCREEN;
+ break;
+
+ case MODEL_PENPARTNER:
+ wacom->dev->name = "Wacom Penpartner";
+ wacom->dev->id.version = MODEL_PENPARTNER;
+ wacom->res_x = 1000;
+ wacom->res_y = 1000;
+ break;
+
+ case MODEL_GRAPHIRE:
+ wacom->dev->name = "Wacom Graphire";
+ wacom->dev->id.version = MODEL_GRAPHIRE;
+ wacom->res_x = 1016;
+ wacom->res_y = 1016;
+ wacom->max_x = 5103;
+ wacom->max_y = 3711;
+ wacom->extra_z_bits = 2;
+ wacom->eraser_mask = 0x08;
+ wacom->flags = F_HAS_STYLUS2 | F_HAS_SCROLLWHEEL;
+ break;
+
+ case MODEL_DIGITIZER_II:
+ wacom->dev->name = "Wacom Digitizer II";
+ wacom->dev->id.version = MODEL_DIGITIZER_II;
+ if (major_v == 1 && minor_v <= 2)
+ wacom->extra_z_bits = 0; /* UNTESTED */
+ break;
+
+ default:
+ dev_err(&wacom->dev->dev, "Unsupported Wacom model %s\n",
+ wacom->data);
+ wacom->result = -ENODEV;
+ return;
+ }
+
+ dev_info(&wacom->dev->dev, "%s tablet, version %u.%u\n",
+ wacom->dev->name, major_v, minor_v);
+}
+
+static void wacom_handle_configuration_response(struct wacom *wacom)
+{
+ int r, skip;
+
+ dev_dbg(&wacom->dev->dev, "Configuration string: %s\n", wacom->data);
+ r = sscanf(wacom->data, "~R%x,%u,%u,%u,%u", &skip, &skip, &skip,
+ &wacom->res_x, &wacom->res_y);
+ if (r != 5)
+ dev_warn(&wacom->dev->dev, "could not get resolution\n");
+}
+
+static void wacom_handle_coordinates_response(struct wacom *wacom)
+{
+ int r;
+
+ dev_dbg(&wacom->dev->dev, "Coordinates string: %s\n", wacom->data);
+ r = sscanf(wacom->data, "~C%u,%u", &wacom->max_x, &wacom->max_y);
+ if (r != 2)
+ dev_warn(&wacom->dev->dev, "could not get max coordinates\n");
+}
+
+static void wacom_handle_response(struct wacom *wacom)
+{
+ if (wacom->data[0] != '~' || wacom->data[1] != wacom->expect) {
+ dev_err(&wacom->dev->dev,
+ "Wacom got an unexpected response: %s\n", wacom->data);
+ wacom->result = -EIO;
+ } else {
+ wacom->result = 0;
+
+ switch (wacom->data[1]) {
+ case '#':
+ wacom_handle_model_response(wacom);
+ break;
+ case 'R':
+ wacom_handle_configuration_response(wacom);
+ break;
+ case 'C':
+ wacom_handle_coordinates_response(wacom);
+ break;
+ }
+ }
+
+ complete(&wacom->cmd_done);
+}
+
+static void wacom_handle_packet(struct wacom *wacom)
+{
+ u8 in_proximity_p, stylus_p, button;
+ unsigned int tool;
+ int x, y, z;
+
+ in_proximity_p = wacom->data[0] & 0x40;
+ stylus_p = wacom->data[0] & 0x20;
+ button = (wacom->data[3] & 0x78) >> 3;
+ x = (wacom->data[0] & 3) << 14 | wacom->data[1]<<7 | wacom->data[2];
+ y = (wacom->data[3] & 3) << 14 | wacom->data[4]<<7 | wacom->data[5];
+
+ if (in_proximity_p && stylus_p) {
+ z = wacom->data[6] & 0x7f;
+ if (wacom->extra_z_bits >= 1)
+ z = z << 1 | (wacom->data[3] & 0x4) >> 2;
+ if (wacom->extra_z_bits > 1)
+ z = z << 1 | (wacom->data[0] & 0x4) >> 2;
+ z = z ^ (0x40 << wacom->extra_z_bits);
+ } else {
+ z = -1;
+ }
+
+ if (stylus_p)
+ tool = (button & wacom->eraser_mask) ? ERASER : STYLUS;
+ else
+ tool = CURSOR;
+
+ if (tool != wacom->tool && wacom->tool != 0) {
+ input_report_key(wacom->dev, tools[wacom->tool].input_id, 0);
+ input_sync(wacom->dev);
+ }
+ wacom->tool = tool;
+
+ input_report_key(wacom->dev, tools[tool].input_id, in_proximity_p);
+ input_report_abs(wacom->dev, ABS_MISC,
+ in_proximity_p ? tools[tool].device_id : 0);
+ input_report_abs(wacom->dev, ABS_X, x);
+ input_report_abs(wacom->dev, ABS_Y, y);
+ input_report_abs(wacom->dev, ABS_PRESSURE, z);
+ if (stylus_p) {
+ input_report_key(wacom->dev, BTN_TOUCH, button & 1);
+ input_report_key(wacom->dev, BTN_STYLUS, button & 2);
+ input_report_key(wacom->dev, BTN_STYLUS2, button & 4);
+ } else {
+ input_report_key(wacom->dev, BTN_LEFT, button & 1);
+ input_report_key(wacom->dev, BTN_RIGHT, button & 2);
+ input_report_key(wacom->dev, BTN_MIDDLE, button & 4);
+ /* handle relative wheel for non-stylus device */
+ z = (wacom->data[6] & 0x30) >> 4;
+ if (wacom->data[6] & 0x40)
+ z = -z;
+ input_report_rel(wacom->dev, REL_WHEEL, z);
+ }
+ input_sync(wacom->dev);
+}
+
+static void wacom_clear_data_buf(struct wacom *wacom)
+{
+ memset(wacom->data, 0, DATA_SIZE);
+ wacom->idx = 0;
+}
+
+static irqreturn_t wacom_interrupt(struct serio *serio, unsigned char data,
+ unsigned int flags)
+{
+ struct wacom *wacom = serio_get_drvdata(serio);
+
+ if (data & 0x80)
+ wacom->idx = 0;
+
+ /*
+ * We're either expecting a carriage return-terminated ASCII
+ * response string, or a seven-byte packet with the MSB set on
+ * the first byte.
+ *
+ * Note however that some tablets (the PenPartner, for
+ * example) don't send a carriage return at the end of a
+ * command. We handle these by waiting for timeout.
+ */
+ if (data == '\r' && !(wacom->data[0] & 0x80)) {
+ wacom_handle_response(wacom);
+ wacom_clear_data_buf(wacom);
+ return IRQ_HANDLED;
+ }
+
+ /* Leave place for 0 termination */
+ if (wacom->idx > (DATA_SIZE - 2)) {
+ dev_dbg(&wacom->dev->dev,
+ "throwing away %d bytes of garbage\n", wacom->idx);
+ wacom_clear_data_buf(wacom);
+ }
+ wacom->data[wacom->idx++] = data;
+
+ if (wacom->idx == PACKET_LENGTH && (wacom->data[0] & 0x80)) {
+ wacom_handle_packet(wacom);
+ wacom_clear_data_buf(wacom);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static void wacom_disconnect(struct serio *serio)
+{
+ struct wacom *wacom = serio_get_drvdata(serio);
+
+ serio_close(serio);
+ serio_set_drvdata(serio, NULL);
+ input_unregister_device(wacom->dev);
+ kfree(wacom);
+}
+
+static int wacom_send(struct serio *serio, const u8 *command)
+{
+ int err = 0;
+
+ for (; !err && *command; command++)
+ err = serio_write(serio, *command);
+
+ return err;
+}
+
+static int wacom_send_setup_string(struct wacom *wacom, struct serio *serio)
+{
+ const u8 *cmd;
+
+ switch (wacom->dev->id.version) {
+ case MODEL_CINTIQ: /* UNTESTED */
+ cmd = COMMAND_ORIGIN_IN_UPPER_LEFT
+ COMMAND_TRANSMIT_AT_MAX_RATE
+ COMMAND_ENABLE_CONTINUOUS_MODE
+ COMMAND_START_SENDING_PACKETS;
+ break;
+
+ case MODEL_PENPARTNER:
+ cmd = COMMAND_ENABLE_PRESSURE_MODE
+ COMMAND_START_SENDING_PACKETS;
+ break;
+
+ default:
+ cmd = COMMAND_MULTI_MODE_INPUT
+ COMMAND_ORIGIN_IN_UPPER_LEFT
+ COMMAND_ENABLE_ALL_MACRO_BUTTONS
+ COMMAND_DISABLE_GROUP_1_MACRO_BUTTONS
+ COMMAND_TRANSMIT_AT_MAX_RATE
+ COMMAND_DISABLE_INCREMENTAL_MODE
+ COMMAND_ENABLE_CONTINUOUS_MODE
+ COMMAND_Z_FILTER
+ COMMAND_START_SENDING_PACKETS;
+ break;
+ }
+
+ return wacom_send(serio, cmd);
+}
+
+static int wacom_send_and_wait(struct wacom *wacom, struct serio *serio,
+ const u8 *cmd, const char *desc)
+{
+ int err;
+ unsigned long u;
+
+ wacom->expect = cmd[1];
+ init_completion(&wacom->cmd_done);
+
+ err = wacom_send(serio, cmd);
+ if (err)
+ return err;
+
+ u = wait_for_completion_timeout(&wacom->cmd_done, HZ);
+ if (u == 0) {
+ /* Timeout, process what we've received. */
+ wacom_handle_response(wacom);
+ }
+
+ wacom->expect = 0;
+ return wacom->result;
+}
+
+static int wacom_setup(struct wacom *wacom, struct serio *serio)
+{
+ int err;
+
+ /* Note that setting the link speed is the job of inputattach.
+ * We assume that reset negotiation has already happened,
+ * here. */
+ err = wacom_send_and_wait(wacom, serio, REQUEST_MODEL_AND_ROM_VERSION,
+ "model and version");
+ if (err)
+ return err;
+
+ if (!(wacom->res_x && wacom->res_y)) {
+ err = wacom_send_and_wait(wacom, serio,
+ REQUEST_CONFIGURATION_STRING,
+ "configuration string");
+ if (err)
+ return err;
+ }
+
+ if (!(wacom->max_x && wacom->max_y)) {
+ err = wacom_send_and_wait(wacom, serio,
+ REQUEST_MAX_COORDINATES,
+ "coordinates string");
+ if (err)
+ return err;
+ }
+
+ return wacom_send_setup_string(wacom, serio);
+}
+
+static int wacom_connect(struct serio *serio, struct serio_driver *drv)
+{
+ struct wacom *wacom;
+ struct input_dev *input_dev;
+ int err = -ENOMEM;
+
+ wacom = kzalloc(sizeof(struct wacom), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!wacom || !input_dev)
+ goto free_device;
+
+ wacom->dev = input_dev;
+ wacom->extra_z_bits = 1;
+ wacom->eraser_mask = 0x04;
+ wacom->tool = wacom->idx = 0;
+ snprintf(wacom->phys, sizeof(wacom->phys), "%s/input0", serio->phys);
+ input_dev->phys = wacom->phys;
+ input_dev->id.bustype = BUS_RS232;
+ input_dev->id.vendor = SERIO_WACOM_IV;
+ input_dev->id.product = serio->id.extra;
+ input_dev->dev.parent = &serio->dev;
+
+ input_dev->evbit[0] =
+ BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS) | BIT_MASK(EV_REL);
+ set_bit(ABS_MISC, input_dev->absbit);
+ set_bit(BTN_TOOL_PEN, input_dev->keybit);
+ set_bit(BTN_TOOL_RUBBER, input_dev->keybit);
+ set_bit(BTN_TOOL_MOUSE, input_dev->keybit);
+ set_bit(BTN_TOUCH, input_dev->keybit);
+ set_bit(BTN_STYLUS, input_dev->keybit);
+ set_bit(BTN_LEFT, input_dev->keybit);
+ set_bit(BTN_RIGHT, input_dev->keybit);
+ set_bit(BTN_MIDDLE, input_dev->keybit);
+
+ serio_set_drvdata(serio, wacom);
+
+ err = serio_open(serio, drv);
+ if (err)
+ goto free_device;
+
+ err = wacom_setup(wacom, serio);
+ if (err)
+ goto close_serio;
+
+ set_bit(INPUT_PROP_DIRECT, input_dev->propbit);
+ if (!(wacom->flags & F_COVERS_SCREEN))
+ __set_bit(INPUT_PROP_POINTER, input_dev->propbit);
+
+ if (wacom->flags & F_HAS_STYLUS2)
+ __set_bit(BTN_STYLUS2, input_dev->keybit);
+
+ if (wacom->flags & F_HAS_SCROLLWHEEL)
+ __set_bit(REL_WHEEL, input_dev->relbit);
+
+ input_abs_set_res(wacom->dev, ABS_X, wacom->res_x);
+ input_abs_set_res(wacom->dev, ABS_Y, wacom->res_y);
+ input_set_abs_params(wacom->dev, ABS_X, 0, wacom->max_x, 0, 0);
+ input_set_abs_params(wacom->dev, ABS_Y, 0, wacom->max_y, 0, 0);
+ input_set_abs_params(wacom->dev, ABS_PRESSURE, -1,
+ (1 << (7 + wacom->extra_z_bits)) - 1, 0, 0);
+
+ err = input_register_device(wacom->dev);
+ if (err)
+ goto close_serio;
+
+ return 0;
+
+close_serio:
+ serio_close(serio);
+free_device:
+ serio_set_drvdata(serio, NULL);
+ input_free_device(input_dev);
+ kfree(wacom);
+ return err;
+}
+
+static struct serio_device_id wacom_serio_ids[] = {
+ {
+ .type = SERIO_RS232,
+ .proto = SERIO_WACOM_IV,
+ .id = SERIO_ANY,
+ .extra = SERIO_ANY,
+ },
+ { 0 }
+};
+
+MODULE_DEVICE_TABLE(serio, wacom_serio_ids);
+
+static struct serio_driver wacom_drv = {
+ .driver = {
+ .name = "wacom_serial4",
+ },
+ .description = "Wacom protocol 4 serial tablet driver",
+ .id_table = wacom_serio_ids,
+ .interrupt = wacom_interrupt,
+ .connect = wacom_connect,
+ .disconnect = wacom_disconnect,
+};
+
+module_serio_driver(wacom_drv);
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-27 23:54:11 +0000