Initial import

1 files changed, 2683 insertions, 0 deletions

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
new file mode 100644
index 000000000..b406ed0af
--- /dev/null
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -0,0 +1,2683 @@
+/*
+ * Atmel maXTouch Touchscreen driver
+ *
+ * Copyright (C) 2010 Samsung Electronics Co.Ltd
+ * Copyright (C) 2011-2014 Atmel Corporation
+ * Copyright (C) 2012 Google, Inc.
+ *
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/acpi.h>
+#include <linux/dmi.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/firmware.h>
+#include <linux/i2c.h>
+#include <linux/i2c/atmel_mxt_ts.h>
+#include <linux/input/mt.h>
+#include <linux/interrupt.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+#include <asm/unaligned.h>
+
+/* Version */
+#define MXT_VER_20		20
+#define MXT_VER_21		21
+#define MXT_VER_22		22
+
+/* Firmware files */
+#define MXT_FW_NAME		"/*(DEBLOBBED)*/"
+#define MXT_CFG_NAME		"maxtouch.cfg"
+#define MXT_CFG_MAGIC		"OBP_RAW V1"
+
+/* Registers */
+#define MXT_INFO		0x00
+#define MXT_FAMILY_ID		0x00
+#define MXT_VARIANT_ID		0x01
+#define MXT_VERSION		0x02
+#define MXT_BUILD		0x03
+#define MXT_MATRIX_X_SIZE	0x04
+#define MXT_MATRIX_Y_SIZE	0x05
+#define MXT_OBJECT_NUM		0x06
+#define MXT_OBJECT_START	0x07
+
+#define MXT_OBJECT_SIZE		6
+#define MXT_INFO_CHECKSUM_SIZE	3
+#define MXT_MAX_BLOCK_WRITE	256
+
+/* Object types */
+#define MXT_DEBUG_DIAGNOSTIC_T37	37
+#define MXT_GEN_MESSAGE_T5		5
+#define MXT_GEN_COMMAND_T6		6
+#define MXT_GEN_POWER_T7		7
+#define MXT_GEN_ACQUIRE_T8		8
+#define MXT_GEN_DATASOURCE_T53		53
+#define MXT_TOUCH_MULTI_T9		9
+#define MXT_TOUCH_KEYARRAY_T15		15
+#define MXT_TOUCH_PROXIMITY_T23		23
+#define MXT_TOUCH_PROXKEY_T52		52
+#define MXT_PROCI_GRIPFACE_T20		20
+#define MXT_PROCG_NOISE_T22		22
+#define MXT_PROCI_ONETOUCH_T24		24
+#define MXT_PROCI_TWOTOUCH_T27		27
+#define MXT_PROCI_GRIP_T40		40
+#define MXT_PROCI_PALM_T41		41
+#define MXT_PROCI_TOUCHSUPPRESSION_T42	42
+#define MXT_PROCI_STYLUS_T47		47
+#define MXT_PROCG_NOISESUPPRESSION_T48	48
+#define MXT_SPT_COMMSCONFIG_T18		18
+#define MXT_SPT_GPIOPWM_T19		19
+#define MXT_SPT_SELFTEST_T25		25
+#define MXT_SPT_CTECONFIG_T28		28
+#define MXT_SPT_USERDATA_T38		38
+#define MXT_SPT_DIGITIZER_T43		43
+#define MXT_SPT_MESSAGECOUNT_T44	44
+#define MXT_SPT_CTECONFIG_T46		46
+#define MXT_TOUCH_MULTITOUCHSCREEN_T100 100
+
+/* MXT_GEN_MESSAGE_T5 object */
+#define MXT_RPTID_NOMSG		0xff
+
+/* MXT_GEN_COMMAND_T6 field */
+#define MXT_COMMAND_RESET	0
+#define MXT_COMMAND_BACKUPNV	1
+#define MXT_COMMAND_CALIBRATE	2
+#define MXT_COMMAND_REPORTALL	3
+#define MXT_COMMAND_DIAGNOSTIC	5
+
+/* Define for T6 status byte */
+#define MXT_T6_STATUS_RESET	(1 << 7)
+#define MXT_T6_STATUS_OFL	(1 << 6)
+#define MXT_T6_STATUS_SIGERR	(1 << 5)
+#define MXT_T6_STATUS_CAL	(1 << 4)
+#define MXT_T6_STATUS_CFGERR	(1 << 3)
+#define MXT_T6_STATUS_COMSERR	(1 << 2)
+
+/* MXT_GEN_POWER_T7 field */
+#define MXT_POWER_IDLEACQINT	0
+#define MXT_POWER_ACTVACQINT	1
+#define MXT_POWER_ACTV2IDLETO	2
+
+/* MXT_GEN_ACQUIRE_T8 field */
+#define MXT_ACQUIRE_CHRGTIME	0
+#define MXT_ACQUIRE_TCHDRIFT	2
+#define MXT_ACQUIRE_DRIFTST	3
+#define MXT_ACQUIRE_TCHAUTOCAL	4
+#define MXT_ACQUIRE_SYNC	5
+#define MXT_ACQUIRE_ATCHCALST	6
+#define MXT_ACQUIRE_ATCHCALSTHR	7
+
+/* MXT_TOUCH_MULTI_T9 field */
+#define MXT_TOUCH_CTRL		0
+#define MXT_T9_ORIENT		9
+#define MXT_T9_RANGE		18
+
+/* MXT_TOUCH_MULTI_T9 status */
+#define MXT_T9_UNGRIP		(1 << 0)
+#define MXT_T9_SUPPRESS		(1 << 1)
+#define MXT_T9_AMP		(1 << 2)
+#define MXT_T9_VECTOR		(1 << 3)
+#define MXT_T9_MOVE		(1 << 4)
+#define MXT_T9_RELEASE		(1 << 5)
+#define MXT_T9_PRESS		(1 << 6)
+#define MXT_T9_DETECT		(1 << 7)
+
+struct t9_range {
+	u16 x;
+	u16 y;
+} __packed;
+
+/* MXT_TOUCH_MULTI_T9 orient */
+#define MXT_T9_ORIENT_SWITCH	(1 << 0)
+
+/* MXT_PROCI_GRIPFACE_T20 field */
+#define MXT_GRIPFACE_CTRL	0
+#define MXT_GRIPFACE_XLOGRIP	1
+#define MXT_GRIPFACE_XHIGRIP	2
+#define MXT_GRIPFACE_YLOGRIP	3
+#define MXT_GRIPFACE_YHIGRIP	4
+#define MXT_GRIPFACE_MAXTCHS	5
+#define MXT_GRIPFACE_SZTHR1	7
+#define MXT_GRIPFACE_SZTHR2	8
+#define MXT_GRIPFACE_SHPTHR1	9
+#define MXT_GRIPFACE_SHPTHR2	10
+#define MXT_GRIPFACE_SUPEXTTO	11
+
+/* MXT_PROCI_NOISE field */
+#define MXT_NOISE_CTRL		0
+#define MXT_NOISE_OUTFLEN	1
+#define MXT_NOISE_GCAFUL_LSB	3
+#define MXT_NOISE_GCAFUL_MSB	4
+#define MXT_NOISE_GCAFLL_LSB	5
+#define MXT_NOISE_GCAFLL_MSB	6
+#define MXT_NOISE_ACTVGCAFVALID	7
+#define MXT_NOISE_NOISETHR	8
+#define MXT_NOISE_FREQHOPSCALE	10
+#define MXT_NOISE_FREQ0		11
+#define MXT_NOISE_FREQ1		12
+#define MXT_NOISE_FREQ2		13
+#define MXT_NOISE_FREQ3		14
+#define MXT_NOISE_FREQ4		15
+#define MXT_NOISE_IDLEGCAFVALID	16
+
+/* MXT_SPT_COMMSCONFIG_T18 */
+#define MXT_COMMS_CTRL		0
+#define MXT_COMMS_CMD		1
+
+/* MXT_SPT_CTECONFIG_T28 field */
+#define MXT_CTE_CTRL		0
+#define MXT_CTE_CMD		1
+#define MXT_CTE_MODE		2
+#define MXT_CTE_IDLEGCAFDEPTH	3
+#define MXT_CTE_ACTVGCAFDEPTH	4
+#define MXT_CTE_VOLTAGE		5
+
+#define MXT_VOLTAGE_DEFAULT	2700000
+#define MXT_VOLTAGE_STEP	10000
+
+/* Define for MXT_GEN_COMMAND_T6 */
+#define MXT_BOOT_VALUE		0xa5
+#define MXT_RESET_VALUE		0x01
+#define MXT_BACKUP_VALUE	0x55
+
+/* T100 Multiple Touch Touchscreen */
+#define MXT_T100_CTRL		0
+#define MXT_T100_CFG1		1
+#define MXT_T100_TCHAUX		3
+#define MXT_T100_XRANGE		13
+#define MXT_T100_YRANGE		24
+
+#define MXT_T100_CFG_SWITCHXY	BIT(5)
+
+#define MXT_T100_TCHAUX_VECT	BIT(0)
+#define MXT_T100_TCHAUX_AMPL	BIT(1)
+#define MXT_T100_TCHAUX_AREA	BIT(2)
+
+#define MXT_T100_DETECT		BIT(7)
+#define MXT_T100_TYPE_MASK	0x70
+
+enum t100_type {
+	MXT_T100_TYPE_FINGER		= 1,
+	MXT_T100_TYPE_PASSIVE_STYLUS	= 2,
+	MXT_T100_TYPE_HOVERING_FINGER	= 4,
+	MXT_T100_TYPE_GLOVE		= 5,
+	MXT_T100_TYPE_LARGE_TOUCH	= 6,
+};
+
+#define MXT_DISTANCE_ACTIVE_TOUCH	0
+#define MXT_DISTANCE_HOVERING		1
+
+#define MXT_TOUCH_MAJOR_DEFAULT		1
+#define MXT_PRESSURE_DEFAULT		1
+
+/* Delay times */
+#define MXT_BACKUP_TIME		50	/* msec */
+#define MXT_RESET_TIME		200	/* msec */
+#define MXT_RESET_TIMEOUT	3000	/* msec */
+#define MXT_CRC_TIMEOUT		1000	/* msec */
+#define MXT_FW_RESET_TIME	3000	/* msec */
+#define MXT_FW_CHG_TIMEOUT	300	/* msec */
+
+/* Command to unlock bootloader */
+#define MXT_UNLOCK_CMD_MSB	0xaa
+#define MXT_UNLOCK_CMD_LSB	0xdc
+
+/* Bootloader mode status */
+#define MXT_WAITING_BOOTLOAD_CMD	0xc0	/* valid 7 6 bit only */
+#define MXT_WAITING_FRAME_DATA	0x80	/* valid 7 6 bit only */
+#define MXT_FRAME_CRC_CHECK	0x02
+#define MXT_FRAME_CRC_FAIL	0x03
+#define MXT_FRAME_CRC_PASS	0x04
+#define MXT_APP_CRC_FAIL	0x40	/* valid 7 8 bit only */
+#define MXT_BOOT_STATUS_MASK	0x3f
+#define MXT_BOOT_EXTENDED_ID	(1 << 5)
+#define MXT_BOOT_ID_MASK	0x1f
+
+/* Touchscreen absolute values */
+#define MXT_MAX_AREA		0xff
+
+#define MXT_PIXELS_PER_MM	20
+
+struct mxt_info {
+	u8 family_id;
+	u8 variant_id;
+	u8 version;
+	u8 build;
+	u8 matrix_xsize;
+	u8 matrix_ysize;
+	u8 object_num;
+};
+
+struct mxt_object {
+	u8 type;
+	u16 start_address;
+	u8 size_minus_one;
+	u8 instances_minus_one;
+	u8 num_report_ids;
+} __packed;
+
+/* Each client has this additional data */
+struct mxt_data {
+	struct i2c_client *client;
+	struct input_dev *input_dev;
+	char phys[64];		/* device physical location */
+	const struct mxt_platform_data *pdata;
+	struct mxt_object *object_table;
+	struct mxt_info info;
+	unsigned int irq;
+	unsigned int max_x;
+	unsigned int max_y;
+	bool in_bootloader;
+	u16 mem_size;
+	u8 t100_aux_ampl;
+	u8 t100_aux_area;
+	u8 t100_aux_vect;
+	u8 max_reportid;
+	u32 config_crc;
+	u32 info_crc;
+	u8 bootloader_addr;
+	u8 *msg_buf;
+	u8 t6_status;
+	bool update_input;
+	u8 last_message_count;
+	u8 num_touchids;
+	u8 multitouch;
+
+	/* Cached parameters from object table */
+	u16 T5_address;
+	u8 T5_msg_size;
+	u8 T6_reportid;
+	u16 T6_address;
+	u16 T7_address;
+	u8 T9_reportid_min;
+	u8 T9_reportid_max;
+	u8 T19_reportid;
+	u16 T44_address;
+	u8 T100_reportid_min;
+	u8 T100_reportid_max;
+
+	/* for fw update in bootloader */
+	struct completion bl_completion;
+
+	/* for reset handling */
+	struct completion reset_completion;
+
+	/* for config update handling */
+	struct completion crc_completion;
+};
+
+static size_t mxt_obj_size(const struct mxt_object *obj)
+{
+	return obj->size_minus_one + 1;
+}
+
+static size_t mxt_obj_instances(const struct mxt_object *obj)
+{
+	return obj->instances_minus_one + 1;
+}
+
+static bool mxt_object_readable(unsigned int type)
+{
+	switch (type) {
+	case MXT_GEN_COMMAND_T6:
+	case MXT_GEN_POWER_T7:
+	case MXT_GEN_ACQUIRE_T8:
+	case MXT_GEN_DATASOURCE_T53:
+	case MXT_TOUCH_MULTI_T9:
+	case MXT_TOUCH_KEYARRAY_T15:
+	case MXT_TOUCH_PROXIMITY_T23:
+	case MXT_TOUCH_PROXKEY_T52:
+	case MXT_PROCI_GRIPFACE_T20:
+	case MXT_PROCG_NOISE_T22:
+	case MXT_PROCI_ONETOUCH_T24:
+	case MXT_PROCI_TWOTOUCH_T27:
+	case MXT_PROCI_GRIP_T40:
+	case MXT_PROCI_PALM_T41:
+	case MXT_PROCI_TOUCHSUPPRESSION_T42:
+	case MXT_PROCI_STYLUS_T47:
+	case MXT_PROCG_NOISESUPPRESSION_T48:
+	case MXT_SPT_COMMSCONFIG_T18:
+	case MXT_SPT_GPIOPWM_T19:
+	case MXT_SPT_SELFTEST_T25:
+	case MXT_SPT_CTECONFIG_T28:
+	case MXT_SPT_USERDATA_T38:
+	case MXT_SPT_DIGITIZER_T43:
+	case MXT_SPT_CTECONFIG_T46:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static void mxt_dump_message(struct mxt_data *data, u8 *message)
+{
+	dev_dbg(&data->client->dev, "message: %*ph\n",
+		data->T5_msg_size, message);
+}
+
+static int mxt_wait_for_completion(struct mxt_data *data,
+				   struct completion *comp,
+				   unsigned int timeout_ms)
+{
+	struct device *dev = &data->client->dev;
+	unsigned long timeout = msecs_to_jiffies(timeout_ms);
+	long ret;
+
+	ret = wait_for_completion_interruptible_timeout(comp, timeout);
+	if (ret < 0) {
+		return ret;
+	} else if (ret == 0) {
+		dev_err(dev, "Wait for completion timed out.\n");
+		return -ETIMEDOUT;
+	}
+	return 0;
+}
+
+static int mxt_bootloader_read(struct mxt_data *data,
+			       u8 *val, unsigned int count)
+{
+	int ret;
+	struct i2c_msg msg;
+
+	msg.addr = data->bootloader_addr;
+	msg.flags = data->client->flags & I2C_M_TEN;
+	msg.flags |= I2C_M_RD;
+	msg.len = count;
+	msg.buf = val;
+
+	ret = i2c_transfer(data->client->adapter, &msg, 1);
+	if (ret == 1) {
+		ret = 0;
+	} else {
+		ret = ret < 0 ? ret : -EIO;
+		dev_err(&data->client->dev, "%s: i2c recv failed (%d)\n",
+			__func__, ret);
+	}
+
+	return ret;
+}
+
+static int mxt_bootloader_write(struct mxt_data *data,
+				const u8 * const val, unsigned int count)
+{
+	int ret;
+	struct i2c_msg msg;
+
+	msg.addr = data->bootloader_addr;
+	msg.flags = data->client->flags & I2C_M_TEN;
+	msg.len = count;
+	msg.buf = (u8 *)val;
+
+	ret = i2c_transfer(data->client->adapter, &msg, 1);
+	if (ret == 1) {
+		ret = 0;
+	} else {
+		ret = ret < 0 ? ret : -EIO;
+		dev_err(&data->client->dev, "%s: i2c send failed (%d)\n",
+			__func__, ret);
+	}
+
+	return ret;
+}
+
+static int mxt_lookup_bootloader_address(struct mxt_data *data, bool retry)
+{
+	u8 appmode = data->client->addr;
+	u8 bootloader;
+
+	switch (appmode) {
+	case 0x4a:
+	case 0x4b:
+		/* Chips after 1664S use different scheme */
+		if (retry || data->info.family_id >= 0xa2) {
+			bootloader = appmode - 0x24;
+			break;
+		}
+		/* Fall through for normal case */
+	case 0x4c:
+	case 0x4d:
+	case 0x5a:
+	case 0x5b:
+		bootloader = appmode - 0x26;
+		break;
+
+	default:
+		dev_err(&data->client->dev,
+			"Appmode i2c address 0x%02x not found\n",
+			appmode);
+		return -EINVAL;
+	}
+
+	data->bootloader_addr = bootloader;
+	return 0;
+}
+
+static int mxt_probe_bootloader(struct mxt_data *data, bool alt_address)
+{
+	struct device *dev = &data->client->dev;
+	int error;
+	u8 val;
+	bool crc_failure;
+
+	error = mxt_lookup_bootloader_address(data, alt_address);
+	if (error)
+		return error;
+
+	error = mxt_bootloader_read(data, &val, 1);
+	if (error)
+		return error;
+
+	/* Check app crc fail mode */
+	crc_failure = (val & ~MXT_BOOT_STATUS_MASK) == MXT_APP_CRC_FAIL;
+
+	dev_err(dev, "Detected bootloader, status:%02X%s\n",
+			val, crc_failure ? ", APP_CRC_FAIL" : "");
+
+	return 0;
+}
+
+static u8 mxt_get_bootloader_version(struct mxt_data *data, u8 val)
+{
+	struct device *dev = &data->client->dev;
+	u8 buf[3];
+
+	if (val & MXT_BOOT_EXTENDED_ID) {
+		if (mxt_bootloader_read(data, &buf[0], 3) != 0) {
+			dev_err(dev, "%s: i2c failure\n", __func__);
+			return val;
+		}
+
+		dev_dbg(dev, "Bootloader ID:%d Version:%d\n", buf[1], buf[2]);
+
+		return buf[0];
+	} else {
+		dev_dbg(dev, "Bootloader ID:%d\n", val & MXT_BOOT_ID_MASK);
+
+		return val;
+	}
+}
+
+static int mxt_check_bootloader(struct mxt_data *data, unsigned int state,
+				bool wait)
+{
+	struct device *dev = &data->client->dev;
+	u8 val;
+	int ret;
+
+recheck:
+	if (wait) {
+		/*
+		 * In application update mode, the interrupt
+		 * line signals state transitions. We must wait for the
+		 * CHG assertion before reading the status byte.
+		 * Once the status byte has been read, the line is deasserted.
+		 */
+		ret = mxt_wait_for_completion(data, &data->bl_completion,
+					      MXT_FW_CHG_TIMEOUT);
+		if (ret) {
+			/*
+			 * TODO: handle -ERESTARTSYS better by terminating
+			 * fw update process before returning to userspace
+			 * by writing length 0x000 to device (iff we are in
+			 * WAITING_FRAME_DATA state).
+			 */
+			dev_err(dev, "Update wait error %d\n", ret);
+			return ret;
+		}
+	}
+
+	ret = mxt_bootloader_read(data, &val, 1);
+	if (ret)
+		return ret;
+
+	if (state == MXT_WAITING_BOOTLOAD_CMD)
+		val = mxt_get_bootloader_version(data, val);
+
+	switch (state) {
+	case MXT_WAITING_BOOTLOAD_CMD:
+	case MXT_WAITING_FRAME_DATA:
+	case MXT_APP_CRC_FAIL:
+		val &= ~MXT_BOOT_STATUS_MASK;
+		break;
+	case MXT_FRAME_CRC_PASS:
+		if (val == MXT_FRAME_CRC_CHECK) {
+			goto recheck;
+		} else if (val == MXT_FRAME_CRC_FAIL) {
+			dev_err(dev, "Bootloader CRC fail\n");
+			return -EINVAL;
+		}
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (val != state) {
+		dev_err(dev, "Invalid bootloader state %02X != %02X\n",
+			val, state);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int mxt_send_bootloader_cmd(struct mxt_data *data, bool unlock)
+{
+	int ret;
+	u8 buf[2];
+
+	if (unlock) {
+		buf[0] = MXT_UNLOCK_CMD_LSB;
+		buf[1] = MXT_UNLOCK_CMD_MSB;
+	} else {
+		buf[0] = 0x01;
+		buf[1] = 0x01;
+	}
+
+	ret = mxt_bootloader_write(data, buf, 2);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int __mxt_read_reg(struct i2c_client *client,
+			       u16 reg, u16 len, void *val)
+{
+	struct i2c_msg xfer[2];
+	u8 buf[2];
+	int ret;
+
+	buf[0] = reg & 0xff;
+	buf[1] = (reg >> 8) & 0xff;
+
+	/* Write register */
+	xfer[0].addr = client->addr;
+	xfer[0].flags = 0;
+	xfer[0].len = 2;
+	xfer[0].buf = buf;
+
+	/* Read data */
+	xfer[1].addr = client->addr;
+	xfer[1].flags = I2C_M_RD;
+	xfer[1].len = len;
+	xfer[1].buf = val;
+
+	ret = i2c_transfer(client->adapter, xfer, 2);
+	if (ret == 2) {
+		ret = 0;
+	} else {
+		if (ret >= 0)
+			ret = -EIO;
+		dev_err(&client->dev, "%s: i2c transfer failed (%d)\n",
+			__func__, ret);
+	}
+
+	return ret;
+}
+
+static int __mxt_write_reg(struct i2c_client *client, u16 reg, u16 len,
+			   const void *val)
+{
+	u8 *buf;
+	size_t count;
+	int ret;
+
+	count = len + 2;
+	buf = kmalloc(count, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	buf[0] = reg & 0xff;
+	buf[1] = (reg >> 8) & 0xff;
+	memcpy(&buf[2], val, len);
+
+	ret = i2c_master_send(client, buf, count);
+	if (ret == count) {
+		ret = 0;
+	} else {
+		if (ret >= 0)
+			ret = -EIO;
+		dev_err(&client->dev, "%s: i2c send failed (%d)\n",
+			__func__, ret);
+	}
+
+	kfree(buf);
+	return ret;
+}
+
+static int mxt_write_reg(struct i2c_client *client, u16 reg, u8 val)
+{
+	return __mxt_write_reg(client, reg, 1, &val);
+}
+
+static struct mxt_object *
+mxt_get_object(struct mxt_data *data, u8 type)
+{
+	struct mxt_object *object;
+	int i;
+
+	for (i = 0; i < data->info.object_num; i++) {
+		object = data->object_table + i;
+		if (object->type == type)
+			return object;
+	}
+
+	dev_warn(&data->client->dev, "Invalid object type T%u\n", type);
+	return NULL;
+}
+
+static void mxt_proc_t6_messages(struct mxt_data *data, u8 *msg)
+{
+	struct device *dev = &data->client->dev;
+	u8 status = msg[1];
+	u32 crc = msg[2] | (msg[3] << 8) | (msg[4] << 16);
+
+	complete(&data->crc_completion);
+
+	if (crc != data->config_crc) {
+		data->config_crc = crc;
+		dev_dbg(dev, "T6 Config Checksum: 0x%06X\n", crc);
+	}
+
+	/* Detect reset */
+	if (status & MXT_T6_STATUS_RESET)
+		complete(&data->reset_completion);
+
+	/* Output debug if status has changed */
+	if (status != data->t6_status)
+		dev_dbg(dev, "T6 Status 0x%02X%s%s%s%s%s%s%s\n",
+			status,
+			status == 0 ? " OK" : "",
+			status & MXT_T6_STATUS_RESET ? " RESET" : "",
+			status & MXT_T6_STATUS_OFL ? " OFL" : "",
+			status & MXT_T6_STATUS_SIGERR ? " SIGERR" : "",
+			status & MXT_T6_STATUS_CAL ? " CAL" : "",
+			status & MXT_T6_STATUS_CFGERR ? " CFGERR" : "",
+			status & MXT_T6_STATUS_COMSERR ? " COMSERR" : "");
+
+	/* Save current status */
+	data->t6_status = status;
+}
+
+static int mxt_write_object(struct mxt_data *data,
+				 u8 type, u8 offset, u8 val)
+{
+	struct mxt_object *object;
+	u16 reg;
+
+	object = mxt_get_object(data, type);
+	if (!object || offset >= mxt_obj_size(object))
+		return -EINVAL;
+
+	reg = object->start_address;
+	return mxt_write_reg(data->client, reg + offset, val);
+}
+
+static void mxt_input_button(struct mxt_data *data, u8 *message)
+{
+	struct input_dev *input = data->input_dev;
+	const struct mxt_platform_data *pdata = data->pdata;
+	bool button;
+	int i;
+
+	/* Active-low switch */
+	for (i = 0; i < pdata->t19_num_keys; i++) {
+		if (pdata->t19_keymap[i] == KEY_RESERVED)
+			continue;
+		button = !(message[1] & (1 << i));
+		input_report_key(input, pdata->t19_keymap[i], button);
+	}
+}
+
+static void mxt_input_sync(struct mxt_data *data)
+{
+	input_mt_report_pointer_emulation(data->input_dev,
+					  data->pdata->t19_num_keys);
+	input_sync(data->input_dev);
+}
+
+static void mxt_proc_t9_message(struct mxt_data *data, u8 *message)
+{
+	struct device *dev = &data->client->dev;
+	struct input_dev *input_dev = data->input_dev;
+	int id;
+	u8 status;
+	int x;
+	int y;
+	int area;
+	int amplitude;
+
+	id = message[0] - data->T9_reportid_min;
+	status = message[1];
+	x = (message[2] << 4) | ((message[4] >> 4) & 0xf);
+	y = (message[3] << 4) | ((message[4] & 0xf));
+
+	/* Handle 10/12 bit switching */
+	if (data->max_x < 1024)
+		x >>= 2;
+	if (data->max_y < 1024)
+		y >>= 2;
+
+	area = message[5];
+	amplitude = message[6];
+
+	dev_dbg(dev,
+		"[%u] %c%c%c%c%c%c%c%c x: %5u y: %5u area: %3u amp: %3u\n",
+		id,
+		(status & MXT_T9_DETECT) ? 'D' : '.',
+		(status & MXT_T9_PRESS) ? 'P' : '.',
+		(status & MXT_T9_RELEASE) ? 'R' : '.',
+		(status & MXT_T9_MOVE) ? 'M' : '.',
+		(status & MXT_T9_VECTOR) ? 'V' : '.',
+		(status & MXT_T9_AMP) ? 'A' : '.',
+		(status & MXT_T9_SUPPRESS) ? 'S' : '.',
+		(status & MXT_T9_UNGRIP) ? 'U' : '.',
+		x, y, area, amplitude);
+
+	input_mt_slot(input_dev, id);
+
+	if (status & MXT_T9_DETECT) {
+		/*
+		 * Multiple bits may be set if the host is slow to read
+		 * the status messages, indicating all the events that
+		 * have happened.
+		 */
+		if (status & MXT_T9_RELEASE) {
+			input_mt_report_slot_state(input_dev,
+						   MT_TOOL_FINGER, 0);
+			mxt_input_sync(data);
+		}
+
+		/* Touch active */
+		input_mt_report_slot_state(input_dev, MT_TOOL_FINGER, 1);
+		input_report_abs(input_dev, ABS_MT_POSITION_X, x);
+		input_report_abs(input_dev, ABS_MT_POSITION_Y, y);
+		input_report_abs(input_dev, ABS_MT_PRESSURE, amplitude);
+		input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR, area);
+	} else {
+		/* Touch no longer active, close out slot */
+		input_mt_report_slot_state(input_dev, MT_TOOL_FINGER, 0);
+	}
+
+	data->update_input = true;
+}
+
+static void mxt_proc_t100_message(struct mxt_data *data, u8 *message)
+{
+	struct device *dev = &data->client->dev;
+	struct input_dev *input_dev = data->input_dev;
+	int id;
+	u8 status;
+	u8 type = 0;
+	u16 x;
+	u16 y;
+	int distance = 0;
+	int tool = 0;
+	u8 major = 0;
+	u8 pressure = 0;
+	u8 orientation = 0;
+
+	id = message[0] - data->T100_reportid_min - 2;
+
+	/* ignore SCRSTATUS events */
+	if (id < 0)
+		return;
+
+	status = message[1];
+	x = get_unaligned_le16(&message[2]);
+	y = get_unaligned_le16(&message[4]);
+
+	if (status & MXT_T100_DETECT) {
+		type = (status & MXT_T100_TYPE_MASK) >> 4;
+
+		switch (type) {
+		case MXT_T100_TYPE_HOVERING_FINGER:
+			tool = MT_TOOL_FINGER;
+			distance = MXT_DISTANCE_HOVERING;
+
+			if (data->t100_aux_vect)
+				orientation = message[data->t100_aux_vect];
+
+			break;
+
+		case MXT_T100_TYPE_FINGER:
+		case MXT_T100_TYPE_GLOVE:
+			tool = MT_TOOL_FINGER;
+			distance = MXT_DISTANCE_ACTIVE_TOUCH;
+
+			if (data->t100_aux_area)
+				major = message[data->t100_aux_area];
+
+			if (data->t100_aux_ampl)
+				pressure = message[data->t100_aux_ampl];
+
+			if (data->t100_aux_vect)
+				orientation = message[data->t100_aux_vect];
+
+			break;
+
+		case MXT_T100_TYPE_PASSIVE_STYLUS:
+			tool = MT_TOOL_PEN;
+
+			/*
+			 * Passive stylus is reported with size zero so
+			 * hardcode.
+			 */
+			major = MXT_TOUCH_MAJOR_DEFAULT;
+
+			if (data->t100_aux_ampl)
+				pressure = message[data->t100_aux_ampl];
+
+			break;
+
+		case MXT_T100_TYPE_LARGE_TOUCH:
+			/* Ignore suppressed touch */
+			break;
+
+		default:
+			dev_dbg(dev, "Unexpected T100 type\n");
+			return;
+		}
+	}
+
+	/*
+	 * Values reported should be non-zero if tool is touching the
+	 * device
+	 */
+	if (!pressure && type != MXT_T100_TYPE_HOVERING_FINGER)
+		pressure = MXT_PRESSURE_DEFAULT;
+
+	input_mt_slot(input_dev, id);
+
+	if (status & MXT_T100_DETECT) {
+		dev_dbg(dev, "[%u] type:%u x:%u y:%u a:%02X p:%02X v:%02X\n",
+			id, type, x, y, major, pressure, orientation);
+
+		input_mt_report_slot_state(input_dev, tool, 1);
+		input_report_abs(input_dev, ABS_MT_POSITION_X, x);
+		input_report_abs(input_dev, ABS_MT_POSITION_Y, y);
+		input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR, major);
+		input_report_abs(input_dev, ABS_MT_PRESSURE, pressure);
+		input_report_abs(input_dev, ABS_MT_DISTANCE, distance);
+		input_report_abs(input_dev, ABS_MT_ORIENTATION, orientation);
+	} else {
+		dev_dbg(dev, "[%u] release\n", id);
+
+		/* close out slot */
+		input_mt_report_slot_state(input_dev, 0, 0);
+	}
+
+	data->update_input = true;
+}
+
+static int mxt_proc_message(struct mxt_data *data, u8 *message)
+{
+	u8 report_id = message[0];
+
+	if (report_id == MXT_RPTID_NOMSG)
+		return 0;
+
+	if (report_id == data->T6_reportid) {
+		mxt_proc_t6_messages(data, message);
+	} else if (!data->input_dev) {
+		/*
+		 * Do not report events if input device
+		 * is not yet registered.
+		 */
+		mxt_dump_message(data, message);
+	} else if (report_id >= data->T9_reportid_min &&
+		   report_id <= data->T9_reportid_max) {
+		mxt_proc_t9_message(data, message);
+	} else if (report_id >= data->T100_reportid_min &&
+		   report_id <= data->T100_reportid_max) {
+		mxt_proc_t100_message(data, message);
+	} else if (report_id == data->T19_reportid) {
+		mxt_input_button(data, message);
+		data->update_input = true;
+	} else {
+		mxt_dump_message(data, message);
+	}
+
+	return 1;
+}
+
+static int mxt_read_and_process_messages(struct mxt_data *data, u8 count)
+{
+	struct device *dev = &data->client->dev;
+	int ret;
+	int i;
+	u8 num_valid = 0;
+
+	/* Safety check for msg_buf */
+	if (count > data->max_reportid)
+		return -EINVAL;
+
+	/* Process remaining messages if necessary */
+	ret = __mxt_read_reg(data->client, data->T5_address,
+				data->T5_msg_size * count, data->msg_buf);
+	if (ret) {
+		dev_err(dev, "Failed to read %u messages (%d)\n", count, ret);
+		return ret;
+	}
+
+	for (i = 0;  i < count; i++) {
+		ret = mxt_proc_message(data,
+			data->msg_buf + data->T5_msg_size * i);
+
+		if (ret == 1)
+			num_valid++;
+	}
+
+	/* return number of messages read */
+	return num_valid;
+}
+
+static irqreturn_t mxt_process_messages_t44(struct mxt_data *data)
+{
+	struct device *dev = &data->client->dev;
+	int ret;
+	u8 count, num_left;
+
+	/* Read T44 and T5 together */
+	ret = __mxt_read_reg(data->client, data->T44_address,
+		data->T5_msg_size + 1, data->msg_buf);
+	if (ret) {
+		dev_err(dev, "Failed to read T44 and T5 (%d)\n", ret);
+		return IRQ_NONE;
+	}
+
+	count = data->msg_buf[0];
+
+	if (count == 0) {
+		/*
+		 * This condition is caused by the CHG line being configured
+		 * in Mode 0. It results in unnecessary I2C operations but it
+		 * is benign.
+		 */
+		dev_dbg(dev, "Interrupt triggered but zero messages\n");
+		return IRQ_NONE;
+	} else if (count > data->max_reportid) {
+		dev_err(dev, "T44 count %d exceeded max report id\n", count);
+		count = data->max_reportid;
+	}
+
+	/* Process first message */
+	ret = mxt_proc_message(data, data->msg_buf + 1);
+	if (ret < 0) {
+		dev_warn(dev, "Unexpected invalid message\n");
+		return IRQ_NONE;
+	}
+
+	num_left = count - 1;
+
+	/* Process remaining messages if necessary */
+	if (num_left) {
+		ret = mxt_read_and_process_messages(data, num_left);
+		if (ret < 0)
+			goto end;
+		else if (ret != num_left)
+			dev_warn(dev, "Unexpected invalid message\n");
+	}
+
+end:
+	if (data->update_input) {
+		mxt_input_sync(data);
+		data->update_input = false;
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int mxt_process_messages_until_invalid(struct mxt_data *data)
+{
+	struct device *dev = &data->client->dev;
+	int count, read;
+	u8 tries = 2;
+
+	count = data->max_reportid;
+
+	/* Read messages until we force an invalid */
+	do {
+		read = mxt_read_and_process_messages(data, count);
+		if (read < count)
+			return 0;
+	} while (--tries);
+
+	if (data->update_input) {
+		mxt_input_sync(data);
+		data->update_input = false;
+	}
+
+	dev_err(dev, "CHG pin isn't cleared\n");
+	return -EBUSY;
+}
+
+static irqreturn_t mxt_process_messages(struct mxt_data *data)
+{
+	int total_handled, num_handled;
+	u8 count = data->last_message_count;
+
+	if (count < 1 || count > data->max_reportid)
+		count = 1;
+
+	/* include final invalid message */
+	total_handled = mxt_read_and_process_messages(data, count + 1);
+	if (total_handled < 0)
+		return IRQ_NONE;
+	/* if there were invalid messages, then we are done */
+	else if (total_handled <= count)
+		goto update_count;
+
+	/* keep reading two msgs until one is invalid or reportid limit */
+	do {
+		num_handled = mxt_read_and_process_messages(data, 2);
+		if (num_handled < 0)
+			return IRQ_NONE;
+
+		total_handled += num_handled;
+
+		if (num_handled < 2)
+			break;
+	} while (total_handled < data->num_touchids);
+
+update_count:
+	data->last_message_count = total_handled;
+
+	if (data->update_input) {
+		mxt_input_sync(data);
+		data->update_input = false;
+	}
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t mxt_interrupt(int irq, void *dev_id)
+{
+	struct mxt_data *data = dev_id;
+
+	if (data->in_bootloader) {
+		/* bootloader state transition completion */
+		complete(&data->bl_completion);
+		return IRQ_HANDLED;
+	}
+
+	if (!data->object_table)
+		return IRQ_HANDLED;
+
+	if (data->T44_address) {
+		return mxt_process_messages_t44(data);
+	} else {
+		return mxt_process_messages(data);
+	}
+}
+
+static int mxt_t6_command(struct mxt_data *data, u16 cmd_offset,
+			  u8 value, bool wait)
+{
+	u16 reg;
+	u8 command_register;
+	int timeout_counter = 0;
+	int ret;
+
+	reg = data->T6_address + cmd_offset;
+
+	ret = mxt_write_reg(data->client, reg, value);
+	if (ret)
+		return ret;
+
+	if (!wait)
+		return 0;
+
+	do {
+		msleep(20);
+		ret = __mxt_read_reg(data->client, reg, 1, &command_register);
+		if (ret)
+			return ret;
+	} while (command_register != 0 && timeout_counter++ <= 100);
+
+	if (timeout_counter > 100) {
+		dev_err(&data->client->dev, "Command failed!\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int mxt_soft_reset(struct mxt_data *data)
+{
+	struct device *dev = &data->client->dev;
+	int ret = 0;
+
+	dev_info(dev, "Resetting chip\n");
+
+	reinit_completion(&data->reset_completion);
+
+	ret = mxt_t6_command(data, MXT_COMMAND_RESET, MXT_RESET_VALUE, false);
+	if (ret)
+		return ret;
+
+	ret = mxt_wait_for_completion(data, &data->reset_completion,
+				      MXT_RESET_TIMEOUT);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static void mxt_update_crc(struct mxt_data *data, u8 cmd, u8 value)
+{
+	/*
+	 * On failure, CRC is set to 0 and config will always be
+	 * downloaded.
+	 */
+	data->config_crc = 0;
+	reinit_completion(&data->crc_completion);
+
+	mxt_t6_command(data, cmd, value, true);
+
+	/*
+	 * Wait for crc message. On failure, CRC is set to 0 and config will
+	 * always be downloaded.
+	 */
+	mxt_wait_for_completion(data, &data->crc_completion, MXT_CRC_TIMEOUT);
+}
+
+static void mxt_calc_crc24(u32 *crc, u8 firstbyte, u8 secondbyte)
+{
+	static const unsigned int crcpoly = 0x80001B;
+	u32 result;
+	u32 data_word;
+
+	data_word = (secondbyte << 8) | firstbyte;
+	result = ((*crc << 1) ^ data_word);
+
+	if (result & 0x1000000)
+		result ^= crcpoly;
+
+	*crc = result;
+}
+
+static u32 mxt_calculate_crc(u8 *base, off_t start_off, off_t end_off)
+{
+	u32 crc = 0;
+	u8 *ptr = base + start_off;
+	u8 *last_val = base + end_off - 1;
+
+	if (end_off < start_off)
+		return -EINVAL;
+
+	while (ptr < last_val) {
+		mxt_calc_crc24(&crc, *ptr, *(ptr + 1));
+		ptr += 2;
+	}
+
+	/* if len is odd, fill the last byte with 0 */
+	if (ptr == last_val)
+		mxt_calc_crc24(&crc, *ptr, 0);
+
+	/* Mask to 24-bit */
+	crc &= 0x00FFFFFF;
+
+	return crc;
+}
+
+static int mxt_prepare_cfg_mem(struct mxt_data *data,
+			       const struct firmware *cfg,
+			       unsigned int data_pos,
+			       unsigned int cfg_start_ofs,
+			       u8 *config_mem,
+			       size_t config_mem_size)
+{
+	struct device *dev = &data->client->dev;
+	struct mxt_object *object;
+	unsigned int type, instance, size, byte_offset;
+	int offset;
+	int ret;
+	int i;
+	u16 reg;
+	u8 val;
+
+	while (data_pos < cfg->size) {
+		/* Read type, instance, length */
+		ret = sscanf(cfg->data + data_pos, "%x %x %x%n",
+			     &type, &instance, &size, &offset);
+		if (ret == 0) {
+			/* EOF */
+			break;
+		} else if (ret != 3) {
+			dev_err(dev, "Bad format: failed to parse object\n");
+			return -EINVAL;
+		}
+		data_pos += offset;
+
+		object = mxt_get_object(data, type);
+		if (!object) {
+			/* Skip object */
+			for (i = 0; i < size; i++) {
+				ret = sscanf(cfg->data + data_pos, "%hhx%n",
+					     &val, &offset);
+				if (ret != 1) {
+					dev_err(dev, "Bad format in T%d at %d\n",
+						type, i);
+					return -EINVAL;
+				}
+				data_pos += offset;
+			}
+			continue;
+		}
+
+		if (size > mxt_obj_size(object)) {
+			/*
+			 * Either we are in fallback mode due to wrong
+			 * config or config from a later fw version,
+			 * or the file is corrupt or hand-edited.
+			 */
+			dev_warn(dev, "Discarding %zu byte(s) in T%u\n",
+				 size - mxt_obj_size(object), type);
+		} else if (mxt_obj_size(object) > size) {
+			/*
+			 * If firmware is upgraded, new bytes may be added to
+			 * end of objects. It is generally forward compatible
+			 * to zero these bytes - previous behaviour will be
+			 * retained. However this does invalidate the CRC and
+			 * will force fallback mode until the configuration is
+			 * updated. We warn here but do nothing else - the
+			 * malloc has zeroed the entire configuration.
+			 */
+			dev_warn(dev, "Zeroing %zu byte(s) in T%d\n",
+				 mxt_obj_size(object) - size, type);
+		}
+
+		if (instance >= mxt_obj_instances(object)) {
+			dev_err(dev, "Object instances exceeded!\n");
+			return -EINVAL;
+		}
+
+		reg = object->start_address + mxt_obj_size(object) * instance;
+
+		for (i = 0; i < size; i++) {
+			ret = sscanf(cfg->data + data_pos, "%hhx%n",
+				     &val,
+				     &offset);
+			if (ret != 1) {
+				dev_err(dev, "Bad format in T%d at %d\n",
+					type, i);
+				return -EINVAL;
+			}
+			data_pos += offset;
+
+			if (i > mxt_obj_size(object))
+				continue;
+
+			byte_offset = reg + i - cfg_start_ofs;
+
+			if (byte_offset >= 0 && byte_offset < config_mem_size) {
+				*(config_mem + byte_offset) = val;
+			} else {
+				dev_err(dev, "Bad object: reg:%d, T%d, ofs=%d\n",
+					reg, object->type, byte_offset);
+				return -EINVAL;
+			}
+		}
+	}
+
+	return 0;
+}
+
+static int mxt_upload_cfg_mem(struct mxt_data *data, unsigned int cfg_start,
+			      u8 *config_mem, size_t config_mem_size)
+{
+	unsigned int byte_offset = 0;
+	int error;
+
+	/* Write configuration as blocks */
+	while (byte_offset < config_mem_size) {
+		unsigned int size = config_mem_size - byte_offset;
+
+		if (size > MXT_MAX_BLOCK_WRITE)
+			size = MXT_MAX_BLOCK_WRITE;
+
+		error = __mxt_write_reg(data->client,
+					cfg_start + byte_offset,
+					size, config_mem + byte_offset);
+		if (error) {
+			dev_err(&data->client->dev,
+				"Config write error, ret=%d\n", error);
+			return error;
+		}
+
+		byte_offset += size;
+	}
+
+	return 0;
+}
+
+/*
+ * mxt_update_cfg - download configuration to chip
+ *
+ * Atmel Raw Config File Format
+ *
+ * The first four lines of the raw config file contain:
+ *  1) Version
+ *  2) Chip ID Information (first 7 bytes of device memory)
+ *  3) Chip Information Block 24-bit CRC Checksum
+ *  4) Chip Configuration 24-bit CRC Checksum
+ *
+ * The rest of the file consists of one line per object instance:
+ *   <TYPE> <INSTANCE> <SIZE> <CONTENTS>
+ *
+ *   <TYPE> - 2-byte object type as hex
+ *   <INSTANCE> - 2-byte object instance number as hex
+ *   <SIZE> - 2-byte object size as hex
+ *   <CONTENTS> - array of <SIZE> 1-byte hex values
+ */
+static int mxt_update_cfg(struct mxt_data *data, const struct firmware *cfg)
+{
+	struct device *dev = &data->client->dev;
+	struct mxt_info cfg_info;
+	int ret;
+	int offset;
+	int data_pos;
+	int i;
+	int cfg_start_ofs;
+	u32 info_crc, config_crc, calculated_crc;
+	u8 *config_mem;
+	size_t config_mem_size;
+
+	mxt_update_crc(data, MXT_COMMAND_REPORTALL, 1);
+
+	if (strncmp(cfg->data, MXT_CFG_MAGIC, strlen(MXT_CFG_MAGIC))) {
+		dev_err(dev, "Unrecognised config file\n");
+		return -EINVAL;
+	}
+
+	data_pos = strlen(MXT_CFG_MAGIC);
+
+	/* Load information block and check */
+	for (i = 0; i < sizeof(struct mxt_info); i++) {
+		ret = sscanf(cfg->data + data_pos, "%hhx%n",
+			     (unsigned char *)&cfg_info + i,
+			     &offset);
+		if (ret != 1) {
+			dev_err(dev, "Bad format\n");
+			return -EINVAL;
+		}
+
+		data_pos += offset;
+	}
+
+	if (cfg_info.family_id != data->info.family_id) {
+		dev_err(dev, "Family ID mismatch!\n");
+		return -EINVAL;
+	}
+
+	if (cfg_info.variant_id != data->info.variant_id) {
+		dev_err(dev, "Variant ID mismatch!\n");
+		return -EINVAL;
+	}
+
+	/* Read CRCs */
+	ret = sscanf(cfg->data + data_pos, "%x%n", &info_crc, &offset);
+	if (ret != 1) {
+		dev_err(dev, "Bad format: failed to parse Info CRC\n");
+		return -EINVAL;
+	}
+	data_pos += offset;
+
+	ret = sscanf(cfg->data + data_pos, "%x%n", &config_crc, &offset);
+	if (ret != 1) {
+		dev_err(dev, "Bad format: failed to parse Config CRC\n");
+		return -EINVAL;
+	}
+	data_pos += offset;
+
+	/*
+	 * The Info Block CRC is calculated over mxt_info and the object
+	 * table. If it does not match then we are trying to load the
+	 * configuration from a different chip or firmware version, so
+	 * the configuration CRC is invalid anyway.
+	 */
+	if (info_crc == data->info_crc) {
+		if (config_crc == 0 || data->config_crc == 0) {
+			dev_info(dev, "CRC zero, attempting to apply config\n");
+		} else if (config_crc == data->config_crc) {
+			dev_dbg(dev, "Config CRC 0x%06X: OK\n",
+				 data->config_crc);
+			return 0;
+		} else {
+			dev_info(dev, "Config CRC 0x%06X: does not match file 0x%06X\n",
+				 data->config_crc, config_crc);
+		}
+	} else {
+		dev_warn(dev,
+			 "Warning: Info CRC error - device=0x%06X file=0x%06X\n",
+			 data->info_crc, info_crc);
+	}
+
+	/* Malloc memory to store configuration */
+	cfg_start_ofs = MXT_OBJECT_START +
+			data->info.object_num * sizeof(struct mxt_object) +
+			MXT_INFO_CHECKSUM_SIZE;
+	config_mem_size = data->mem_size - cfg_start_ofs;
+	config_mem = kzalloc(config_mem_size, GFP_KERNEL);
+	if (!config_mem) {
+		dev_err(dev, "Failed to allocate memory\n");
+		return -ENOMEM;
+	}
+
+	ret = mxt_prepare_cfg_mem(data, cfg, data_pos, cfg_start_ofs,
+				  config_mem, config_mem_size);
+	if (ret)
+		goto release_mem;
+
+	/* Calculate crc of the received configs (not the raw config file) */
+	if (data->T7_address < cfg_start_ofs) {
+		dev_err(dev, "Bad T7 address, T7addr = %x, config offset %x\n",
+			data->T7_address, cfg_start_ofs);
+		ret = 0;
+		goto release_mem;
+	}
+
+	calculated_crc = mxt_calculate_crc(config_mem,
+					   data->T7_address - cfg_start_ofs,
+					   config_mem_size);
+
+	if (config_crc > 0 && config_crc != calculated_crc)
+		dev_warn(dev, "Config CRC error, calculated=%06X, file=%06X\n",
+			 calculated_crc, config_crc);
+
+	ret = mxt_upload_cfg_mem(data, cfg_start_ofs,
+				 config_mem, config_mem_size);
+	if (ret)
+		goto release_mem;
+
+	mxt_update_crc(data, MXT_COMMAND_BACKUPNV, MXT_BACKUP_VALUE);
+
+	ret = mxt_soft_reset(data);
+	if (ret)
+		goto release_mem;
+
+	dev_info(dev, "Config successfully updated\n");
+
+release_mem:
+	kfree(config_mem);
+	return ret;
+}
+
+static int mxt_acquire_irq(struct mxt_data *data)
+{
+	int error;
+
+	enable_irq(data->irq);
+
+	error = mxt_process_messages_until_invalid(data);
+	if (error)
+		return error;
+
+	return 0;
+}
+
+static int mxt_get_info(struct mxt_data *data)
+{
+	struct i2c_client *client = data->client;
+	struct mxt_info *info = &data->info;
+	int error;
+
+	/* Read 7-byte info block starting at address 0 */
+	error = __mxt_read_reg(client, MXT_INFO, sizeof(*info), info);
+	if (error)
+		return error;
+
+	return 0;
+}
+
+static void mxt_free_input_device(struct mxt_data *data)
+{
+	if (data->input_dev) {
+		input_unregister_device(data->input_dev);
+		data->input_dev = NULL;
+	}
+}
+
+static void mxt_free_object_table(struct mxt_data *data)
+{
+	kfree(data->object_table);
+	data->object_table = NULL;
+	kfree(data->msg_buf);
+	data->msg_buf = NULL;
+	data->T5_address = 0;
+	data->T5_msg_size = 0;
+	data->T6_reportid = 0;
+	data->T7_address = 0;
+	data->T9_reportid_min = 0;
+	data->T9_reportid_max = 0;
+	data->T19_reportid = 0;
+	data->T44_address = 0;
+	data->T100_reportid_min = 0;
+	data->T100_reportid_max = 0;
+	data->max_reportid = 0;
+}
+
+static int mxt_get_object_table(struct mxt_data *data)
+{
+	struct i2c_client *client = data->client;
+	size_t table_size;
+	struct mxt_object *object_table;
+	int error;
+	int i;
+	u8 reportid;
+	u16 end_address;
+
+	table_size = data->info.object_num * sizeof(struct mxt_object);
+	object_table = kzalloc(table_size, GFP_KERNEL);
+	if (!object_table) {
+		dev_err(&data->client->dev, "Failed to allocate memory\n");
+		return -ENOMEM;
+	}
+
+	error = __mxt_read_reg(client, MXT_OBJECT_START, table_size,
+			object_table);
+	if (error) {
+		kfree(object_table);
+		return error;
+	}
+
+	/* Valid Report IDs start counting from 1 */
+	reportid = 1;
+	data->mem_size = 0;
+	for (i = 0; i < data->info.object_num; i++) {
+		struct mxt_object *object = object_table + i;
+		u8 min_id, max_id;
+
+		le16_to_cpus(&object->start_address);
+
+		if (object->num_report_ids) {
+			min_id = reportid;
+			reportid += object->num_report_ids *
+					mxt_obj_instances(object);
+			max_id = reportid - 1;
+		} else {
+			min_id = 0;
+			max_id = 0;
+		}
+
+		dev_dbg(&data->client->dev,
+			"T%u Start:%u Size:%zu Instances:%zu Report IDs:%u-%u\n",
+			object->type, object->start_address,
+			mxt_obj_size(object), mxt_obj_instances(object),
+			min_id, max_id);
+
+		switch (object->type) {
+		case MXT_GEN_MESSAGE_T5:
+			if (data->info.family_id == 0x80 &&
+			    data->info.version < 0x20) {
+				/*
+				 * On mXT224 firmware versions prior to V2.0
+				 * read and discard unused CRC byte otherwise
+				 * DMA reads are misaligned.
+				 */
+				data->T5_msg_size = mxt_obj_size(object);
+			} else {
+				/* CRC not enabled, so skip last byte */
+				data->T5_msg_size = mxt_obj_size(object) - 1;
+			}
+			data->T5_address = object->start_address;
+			break;
+		case MXT_GEN_COMMAND_T6:
+			data->T6_reportid = min_id;
+			data->T6_address = object->start_address;
+			break;
+		case MXT_GEN_POWER_T7:
+			data->T7_address = object->start_address;
+			break;
+		case MXT_TOUCH_MULTI_T9:
+			data->multitouch = MXT_TOUCH_MULTI_T9;
+			data->T9_reportid_min = min_id;
+			data->T9_reportid_max = max_id;
+			data->num_touchids = object->num_report_ids
+						* mxt_obj_instances(object);
+			break;
+		case MXT_SPT_MESSAGECOUNT_T44:
+			data->T44_address = object->start_address;
+			break;
+		case MXT_SPT_GPIOPWM_T19:
+			data->T19_reportid = min_id;
+			break;
+		case MXT_TOUCH_MULTITOUCHSCREEN_T100:
+			data->multitouch = MXT_TOUCH_MULTITOUCHSCREEN_T100;
+			data->T100_reportid_min = min_id;
+			data->T100_reportid_max = max_id;
+			/* first two report IDs reserved */
+			data->num_touchids = object->num_report_ids - 2;
+			break;
+		}
+
+		end_address = object->start_address
+			+ mxt_obj_size(object) * mxt_obj_instances(object) - 1;
+
+		if (end_address >= data->mem_size)
+			data->mem_size = end_address + 1;
+	}
+
+	/* Store maximum reportid */
+	data->max_reportid = reportid;
+
+	/* If T44 exists, T5 position has to be directly after */
+	if (data->T44_address && (data->T5_address != data->T44_address + 1)) {
+		dev_err(&client->dev, "Invalid T44 position\n");
+		error = -EINVAL;
+		goto free_object_table;
+	}
+
+	data->msg_buf = kcalloc(data->max_reportid,
+				data->T5_msg_size, GFP_KERNEL);
+	if (!data->msg_buf) {
+		dev_err(&client->dev, "Failed to allocate message buffer\n");
+		error = -ENOMEM;
+		goto free_object_table;
+	}
+
+	data->object_table = object_table;
+
+	return 0;
+
+free_object_table:
+	mxt_free_object_table(data);
+	return error;
+}
+
+static int mxt_read_t9_resolution(struct mxt_data *data)
+{
+	struct i2c_client *client = data->client;
+	int error;
+	struct t9_range range;
+	unsigned char orient;
+	struct mxt_object *object;
+
+	object = mxt_get_object(data, MXT_TOUCH_MULTI_T9);
+	if (!object)
+		return -EINVAL;
+
+	error = __mxt_read_reg(client,
+			       object->start_address + MXT_T9_RANGE,
+			       sizeof(range), &range);
+	if (error)
+		return error;
+
+	le16_to_cpus(&range.x);
+	le16_to_cpus(&range.y);
+
+	error =  __mxt_read_reg(client,
+				object->start_address + MXT_T9_ORIENT,
+				1, &orient);
+	if (error)
+		return error;
+
+	/* Handle default values */
+	if (range.x == 0)
+		range.x = 1023;
+
+	if (range.y == 0)
+		range.y = 1023;
+
+	if (orient & MXT_T9_ORIENT_SWITCH) {
+		data->max_x = range.y;
+		data->max_y = range.x;
+	} else {
+		data->max_x = range.x;
+		data->max_y = range.y;
+	}
+
+	dev_dbg(&client->dev,
+		"Touchscreen size X%uY%u\n", data->max_x, data->max_y);
+
+	return 0;
+}
+
+static int mxt_read_t100_config(struct mxt_data *data)
+{
+	struct i2c_client *client = data->client;
+	int error;
+	struct mxt_object *object;
+	u16 range_x, range_y;
+	u8 cfg, tchaux;
+	u8 aux;
+
+	object = mxt_get_object(data, MXT_TOUCH_MULTITOUCHSCREEN_T100);
+	if (!object)
+		return -EINVAL;
+
+	error = __mxt_read_reg(client,
+			       object->start_address + MXT_T100_XRANGE,
+			       sizeof(range_x), &range_x);
+	if (error)
+		return error;
+
+	le16_to_cpus(&range_x);
+
+	error = __mxt_read_reg(client,
+			       object->start_address + MXT_T100_YRANGE,
+			       sizeof(range_y), &range_y);
+	if (error)
+		return error;
+
+	le16_to_cpus(&range_y);
+
+	error =  __mxt_read_reg(client,
+				object->start_address + MXT_T100_CFG1,
+				1, &cfg);
+	if (error)
+		return error;
+
+	error =  __mxt_read_reg(client,
+				object->start_address + MXT_T100_TCHAUX,
+				1, &tchaux);
+	if (error)
+		return error;
+
+	/* Handle default values */
+	if (range_x == 0)
+		range_x = 1023;
+
+	if (range_y == 0)
+		range_y = 1023;
+
+	if (cfg & MXT_T100_CFG_SWITCHXY) {
+		data->max_x = range_y;
+		data->max_y = range_x;
+	} else {
+		data->max_x = range_x;
+		data->max_y = range_y;
+	}
+
+	/* allocate aux bytes */
+	aux = 6;
+
+	if (tchaux & MXT_T100_TCHAUX_VECT)
+		data->t100_aux_vect = aux++;
+
+	if (tchaux & MXT_T100_TCHAUX_AMPL)
+		data->t100_aux_ampl = aux++;
+
+	if (tchaux & MXT_T100_TCHAUX_AREA)
+		data->t100_aux_area = aux++;
+
+	dev_dbg(&client->dev,
+		"T100 aux mappings vect:%u ampl:%u area:%u\n",
+		data->t100_aux_vect, data->t100_aux_ampl, data->t100_aux_area);
+
+	dev_info(&client->dev,
+		 "T100 Touchscreen size X%uY%u\n", data->max_x, data->max_y);
+
+	return 0;
+}
+
+static int mxt_input_open(struct input_dev *dev);
+static void mxt_input_close(struct input_dev *dev);
+
+static void mxt_set_up_as_touchpad(struct input_dev *input_dev,
+				   struct mxt_data *data)
+{
+	const struct mxt_platform_data *pdata = data->pdata;
+	int i;
+
+	input_dev->name = "Atmel maXTouch Touchpad";
+
+	__set_bit(INPUT_PROP_BUTTONPAD, input_dev->propbit);
+
+	input_abs_set_res(input_dev, ABS_X, MXT_PIXELS_PER_MM);
+	input_abs_set_res(input_dev, ABS_Y, MXT_PIXELS_PER_MM);
+	input_abs_set_res(input_dev, ABS_MT_POSITION_X,
+			  MXT_PIXELS_PER_MM);
+	input_abs_set_res(input_dev, ABS_MT_POSITION_Y,
+			  MXT_PIXELS_PER_MM);
+
+	for (i = 0; i < pdata->t19_num_keys; i++)
+		if (pdata->t19_keymap[i] != KEY_RESERVED)
+			input_set_capability(input_dev, EV_KEY,
+					     pdata->t19_keymap[i]);
+}
+
+static int mxt_initialize_input_device(struct mxt_data *data)
+{
+	const struct mxt_platform_data *pdata = data->pdata;
+	struct device *dev = &data->client->dev;
+	struct input_dev *input_dev;
+	int error;
+	unsigned int num_mt_slots;
+	unsigned int mt_flags = 0;
+
+	switch (data->multitouch) {
+	case MXT_TOUCH_MULTI_T9:
+		num_mt_slots = data->T9_reportid_max - data->T9_reportid_min + 1;
+		error = mxt_read_t9_resolution(data);
+		if (error)
+			dev_warn(dev, "Failed to initialize T9 resolution\n");
+		break;
+
+	case MXT_TOUCH_MULTITOUCHSCREEN_T100:
+		num_mt_slots = data->num_touchids;
+		error = mxt_read_t100_config(data);
+		if (error)
+			dev_warn(dev, "Failed to read T100 config\n");
+		break;
+
+	default:
+		dev_err(dev, "Invalid multitouch object\n");
+		return -EINVAL;
+	}
+
+	input_dev = input_allocate_device();
+	if (!input_dev) {
+		dev_err(dev, "Failed to allocate memory\n");
+		return -ENOMEM;
+	}
+
+	input_dev->name = "Atmel maXTouch Touchscreen";
+	input_dev->phys = data->phys;
+	input_dev->id.bustype = BUS_I2C;
+	input_dev->dev.parent = dev;
+	input_dev->open = mxt_input_open;
+	input_dev->close = mxt_input_close;
+
+	input_set_capability(input_dev, EV_KEY, BTN_TOUCH);
+
+	/* For single touch */
+	input_set_abs_params(input_dev, ABS_X, 0, data->max_x, 0, 0);
+	input_set_abs_params(input_dev, ABS_Y, 0, data->max_y, 0, 0);
+
+	if (data->multitouch == MXT_TOUCH_MULTI_T9 ||
+	    (data->multitouch == MXT_TOUCH_MULTITOUCHSCREEN_T100 &&
+	     data->t100_aux_ampl)) {
+		input_set_abs_params(input_dev, ABS_PRESSURE, 0, 255, 0, 0);
+	}
+
+	/* If device has buttons we assume it is a touchpad */
+	if (pdata->t19_num_keys) {
+		mxt_set_up_as_touchpad(input_dev, data);
+		mt_flags |= INPUT_MT_POINTER;
+	}
+
+	/* For multi touch */
+	error = input_mt_init_slots(input_dev, num_mt_slots, mt_flags);
+	if (error) {
+		dev_err(dev, "Error %d initialising slots\n", error);
+		goto err_free_mem;
+	}
+
+	if (data->multitouch == MXT_TOUCH_MULTITOUCHSCREEN_T100) {
+		input_set_abs_params(input_dev, ABS_MT_TOOL_TYPE,
+				     0, MT_TOOL_MAX, 0, 0);
+		input_set_abs_params(input_dev, ABS_MT_DISTANCE,
+				     MXT_DISTANCE_ACTIVE_TOUCH,
+				     MXT_DISTANCE_HOVERING,
+				     0, 0);
+	}
+
+	input_set_abs_params(input_dev, ABS_MT_POSITION_X,
+			     0, data->max_x, 0, 0);
+	input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
+			     0, data->max_y, 0, 0);
+
+	if (data->multitouch == MXT_TOUCH_MULTI_T9 ||
+	    (data->multitouch == MXT_TOUCH_MULTITOUCHSCREEN_T100 &&
+	     data->t100_aux_area)) {
+		input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR,
+				     0, MXT_MAX_AREA, 0, 0);
+	}
+
+	if (data->multitouch == MXT_TOUCH_MULTI_T9 ||
+	    (data->multitouch == MXT_TOUCH_MULTITOUCHSCREEN_T100 &&
+	     data->t100_aux_ampl)) {
+		input_set_abs_params(input_dev, ABS_MT_PRESSURE,
+				     0, 255, 0, 0);
+	}
+
+	if (data->multitouch == MXT_TOUCH_MULTITOUCHSCREEN_T100 &&
+	    data->t100_aux_vect) {
+		input_set_abs_params(input_dev, ABS_MT_ORIENTATION,
+				     0, 255, 0, 0);
+	}
+
+	if (data->multitouch == MXT_TOUCH_MULTITOUCHSCREEN_T100 &&
+	    data->t100_aux_ampl) {
+		input_set_abs_params(input_dev, ABS_MT_PRESSURE,
+				     0, 255, 0, 0);
+	}
+
+	if (data->multitouch == MXT_TOUCH_MULTITOUCHSCREEN_T100 &&
+	    data->t100_aux_vect) {
+		input_set_abs_params(input_dev, ABS_MT_ORIENTATION,
+				     0, 255, 0, 0);
+	}
+
+	input_set_drvdata(input_dev, data);
+
+	error = input_register_device(input_dev);
+	if (error) {
+		dev_err(dev, "Error %d registering input device\n", error);
+		goto err_free_mem;
+	}
+
+	data->input_dev = input_dev;
+
+	return 0;
+
+err_free_mem:
+	input_free_device(input_dev);
+	return error;
+}
+
+static int mxt_configure_objects(struct mxt_data *data,
+				 const struct firmware *cfg);
+
+static void mxt_config_cb(const struct firmware *cfg, void *ctx)
+{
+	mxt_configure_objects(ctx, cfg);
+	release_firmware(cfg);
+}
+
+static int mxt_initialize(struct mxt_data *data)
+{
+	struct i2c_client *client = data->client;
+	int recovery_attempts = 0;
+	int error;
+
+	while (1) {
+		error = mxt_get_info(data);
+		if (!error)
+			break;
+
+		/* Check bootloader state */
+		error = mxt_probe_bootloader(data, false);
+		if (error) {
+			dev_info(&client->dev, "Trying alternate bootloader address\n");
+			error = mxt_probe_bootloader(data, true);
+			if (error) {
+				/* Chip is not in appmode or bootloader mode */
+				return error;
+			}
+		}
+
+		/* OK, we are in bootloader, see if we can recover */
+		if (++recovery_attempts > 1) {
+			dev_err(&client->dev, "Could not recover from bootloader mode\n");
+			/*
+			 * We can reflash from this state, so do not
+			 * abort initialization.
+			 */
+			data->in_bootloader = true;
+			return 0;
+		}
+
+		/* Attempt to exit bootloader into app mode */
+		mxt_send_bootloader_cmd(data, false);
+		msleep(MXT_FW_RESET_TIME);
+	}
+
+	/* Get object table information */
+	error = mxt_get_object_table(data);
+	if (error) {
+		dev_err(&client->dev, "Error %d reading object table\n", error);
+		return error;
+	}
+
+	error = mxt_acquire_irq(data);
+	if (error)
+		goto err_free_object_table;
+
+	error = reject_firmware_nowait(THIS_MODULE, true, MXT_CFG_NAME,
+					&client->dev, GFP_KERNEL, data,
+					mxt_config_cb);
+	if (error) {
+		dev_err(&client->dev, "Failed to invoke firmware loader: %d\n",
+			error);
+		goto err_free_object_table;
+	}
+
+	return 0;
+
+err_free_object_table:
+	mxt_free_object_table(data);
+	return error;
+}
+
+static int mxt_configure_objects(struct mxt_data *data,
+				 const struct firmware *cfg)
+{
+	struct device *dev = &data->client->dev;
+	struct mxt_info *info = &data->info;
+	int error;
+
+	if (cfg) {
+		error = mxt_update_cfg(data, cfg);
+		if (error)
+			dev_warn(dev, "Error %d updating config\n", error);
+	}
+
+	if (data->multitouch) {
+		error = mxt_initialize_input_device(data);
+		if (error)
+			return error;
+	} else {
+		dev_warn(dev, "No touch object detected\n");
+	}
+
+	dev_info(dev,
+		 "Family: %u Variant: %u Firmware V%u.%u.%02X Objects: %u\n",
+		 info->family_id, info->variant_id, info->version >> 4,
+		 info->version & 0xf, info->build, info->object_num);
+
+	return 0;
+}
+
+/* Firmware Version is returned as Major.Minor.Build */
+static ssize_t mxt_fw_version_show(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	struct mxt_data *data = dev_get_drvdata(dev);
+	struct mxt_info *info = &data->info;
+	return scnprintf(buf, PAGE_SIZE, "%u.%u.%02X\n",
+			 info->version >> 4, info->version & 0xf, info->build);
+}
+
+/* Hardware Version is returned as FamilyID.VariantID */
+static ssize_t mxt_hw_version_show(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	struct mxt_data *data = dev_get_drvdata(dev);
+	struct mxt_info *info = &data->info;
+	return scnprintf(buf, PAGE_SIZE, "%u.%u\n",
+			 info->family_id, info->variant_id);
+}
+
+static ssize_t mxt_show_instance(char *buf, int count,
+				 struct mxt_object *object, int instance,
+				 const u8 *val)
+{
+	int i;
+
+	if (mxt_obj_instances(object) > 1)
+		count += scnprintf(buf + count, PAGE_SIZE - count,
+				   "Instance %u\n", instance);
+
+	for (i = 0; i < mxt_obj_size(object); i++)
+		count += scnprintf(buf + count, PAGE_SIZE - count,
+				"\t[%2u]: %02x (%d)\n", i, val[i], val[i]);
+	count += scnprintf(buf + count, PAGE_SIZE - count, "\n");
+
+	return count;
+}
+
+static ssize_t mxt_object_show(struct device *dev,
+				    struct device_attribute *attr, char *buf)
+{
+	struct mxt_data *data = dev_get_drvdata(dev);
+	struct mxt_object *object;
+	int count = 0;
+	int i, j;
+	int error;
+	u8 *obuf;
+
+	/* Pre-allocate buffer large enough to hold max sized object. */
+	obuf = kmalloc(256, GFP_KERNEL);
+	if (!obuf)
+		return -ENOMEM;
+
+	error = 0;
+	for (i = 0; i < data->info.object_num; i++) {
+		object = data->object_table + i;
+
+		if (!mxt_object_readable(object->type))
+			continue;
+
+		count += scnprintf(buf + count, PAGE_SIZE - count,
+				"T%u:\n", object->type);
+
+		for (j = 0; j < mxt_obj_instances(object); j++) {
+			u16 size = mxt_obj_size(object);
+			u16 addr = object->start_address + j * size;
+
+			error = __mxt_read_reg(data->client, addr, size, obuf);
+			if (error)
+				goto done;
+
+			count = mxt_show_instance(buf, count, object, j, obuf);
+		}
+	}
+
+done:
+	kfree(obuf);
+	return error ?: count;
+}
+
+static int mxt_check_firmware_format(struct device *dev,
+				     const struct firmware *fw)
+{
+	unsigned int pos = 0;
+	char c;
+
+	while (pos < fw->size) {
+		c = *(fw->data + pos);
+
+		if (c < '0' || (c > '9' && c < 'A') || c > 'F')
+			return 0;
+
+		pos++;
+	}
+
+	/*
+	 * To convert file try:
+	/*(DEBLOBBED)*/
+	dev_err(dev, "Aborting: firmware file must be in binary format\n");
+
+	return -EINVAL;
+}
+
+static int mxt_load_fw(struct device *dev, const char *fn)
+{
+	struct mxt_data *data = dev_get_drvdata(dev);
+	const struct firmware *fw = NULL;
+	unsigned int frame_size;
+	unsigned int pos = 0;
+	unsigned int retry = 0;
+	unsigned int frame = 0;
+	int ret;
+
+	ret = reject_firmware(&fw, fn, dev);
+	if (ret) {
+		dev_err(dev, "Unable to open firmware %s\n", fn);
+		return ret;
+	}
+
+	/* Check for incorrect enc file */
+	ret = mxt_check_firmware_format(dev, fw);
+	if (ret)
+		goto release_firmware;
+
+	if (!data->in_bootloader) {
+		/* Change to the bootloader mode */
+		data->in_bootloader = true;
+
+		ret = mxt_t6_command(data, MXT_COMMAND_RESET,
+				     MXT_BOOT_VALUE, false);
+		if (ret)
+			goto release_firmware;
+
+		msleep(MXT_RESET_TIME);
+
+		/* Do not need to scan since we know family ID */
+		ret = mxt_lookup_bootloader_address(data, 0);
+		if (ret)
+			goto release_firmware;
+
+		mxt_free_input_device(data);
+		mxt_free_object_table(data);
+	} else {
+		enable_irq(data->irq);
+	}
+
+	reinit_completion(&data->bl_completion);
+
+	ret = mxt_check_bootloader(data, MXT_WAITING_BOOTLOAD_CMD, false);
+	if (ret) {
+		/* Bootloader may still be unlocked from previous attempt */
+		ret = mxt_check_bootloader(data, MXT_WAITING_FRAME_DATA, false);
+		if (ret)
+			goto disable_irq;
+	} else {
+		dev_info(dev, "Unlocking bootloader\n");
+
+		/* Unlock bootloader */
+		ret = mxt_send_bootloader_cmd(data, true);
+		if (ret)
+			goto disable_irq;
+	}
+
+	while (pos < fw->size) {
+		ret = mxt_check_bootloader(data, MXT_WAITING_FRAME_DATA, true);
+		if (ret)
+			goto disable_irq;
+
+		frame_size = ((*(fw->data + pos) << 8) | *(fw->data + pos + 1));
+
+		/* Take account of CRC bytes */
+		frame_size += 2;
+
+		/* Write one frame to device */
+		ret = mxt_bootloader_write(data, fw->data + pos, frame_size);
+		if (ret)
+			goto disable_irq;
+
+		ret = mxt_check_bootloader(data, MXT_FRAME_CRC_PASS, true);
+		if (ret) {
+			retry++;
+
+			/* Back off by 20ms per retry */
+			msleep(retry * 20);
+
+			if (retry > 20) {
+				dev_err(dev, "Retry count exceeded\n");
+				goto disable_irq;
+			}
+		} else {
+			retry = 0;
+			pos += frame_size;
+			frame++;
+		}
+
+		if (frame % 50 == 0)
+			dev_dbg(dev, "Sent %d frames, %d/%zd bytes\n",
+				frame, pos, fw->size);
+	}
+
+	/* Wait for flash. */
+	ret = mxt_wait_for_completion(data, &data->bl_completion,
+				      MXT_FW_RESET_TIME);
+	if (ret)
+		goto disable_irq;
+
+	dev_dbg(dev, "Sent %d frames, %d bytes\n", frame, pos);
+
+	/*
+	 * Wait for device to reset. Some bootloader versions do not assert
+	 * the CHG line after bootloading has finished, so ignore potential
+	 * errors.
+	 */
+	mxt_wait_for_completion(data, &data->bl_completion, MXT_FW_RESET_TIME);
+
+	data->in_bootloader = false;
+
+disable_irq:
+	disable_irq(data->irq);
+release_firmware:
+	release_firmware(fw);
+	return ret;
+}
+
+static ssize_t mxt_update_fw_store(struct device *dev,
+					struct device_attribute *attr,
+					const char *buf, size_t count)
+{
+	struct mxt_data *data = dev_get_drvdata(dev);
+	int error;
+
+	error = mxt_load_fw(dev, MXT_FW_NAME);
+	if (error) {
+		dev_err(dev, "The firmware update failed(%d)\n", error);
+		count = error;
+	} else {
+		dev_info(dev, "The firmware update succeeded\n");
+
+		error = mxt_initialize(data);
+		if (error)
+			return error;
+	}
+
+	return count;
+}
+
+static DEVICE_ATTR(fw_version, S_IRUGO, mxt_fw_version_show, NULL);
+static DEVICE_ATTR(hw_version, S_IRUGO, mxt_hw_version_show, NULL);
+static DEVICE_ATTR(object, S_IRUGO, mxt_object_show, NULL);
+static DEVICE_ATTR(update_fw, S_IWUSR, NULL, mxt_update_fw_store);
+
+static struct attribute *mxt_attrs[] = {
+	&dev_attr_fw_version.attr,
+	&dev_attr_hw_version.attr,
+	&dev_attr_object.attr,
+	&dev_attr_update_fw.attr,
+	NULL
+};
+
+static const struct attribute_group mxt_attr_group = {
+	.attrs = mxt_attrs,
+};
+
+static void mxt_start(struct mxt_data *data)
+{
+	/* Touch enable */
+	mxt_write_object(data, data->multitouch, MXT_TOUCH_CTRL, 0x83);
+}
+
+static void mxt_stop(struct mxt_data *data)
+{
+	/* Touch disable */
+	mxt_write_object(data, data->multitouch, MXT_TOUCH_CTRL, 0);
+}
+
+static int mxt_input_open(struct input_dev *dev)
+{
+	struct mxt_data *data = input_get_drvdata(dev);
+
+	mxt_start(data);
+
+	return 0;
+}
+
+static void mxt_input_close(struct input_dev *dev)
+{
+	struct mxt_data *data = input_get_drvdata(dev);
+
+	mxt_stop(data);
+}
+
+#ifdef CONFIG_OF
+static const struct mxt_platform_data *mxt_parse_dt(struct i2c_client *client)
+{
+	struct mxt_platform_data *pdata;
+	u32 *keymap;
+	u32 keycode;
+	int proplen, i, ret;
+
+	if (!client->dev.of_node)
+		return ERR_PTR(-ENOENT);
+
+	pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return ERR_PTR(-ENOMEM);
+
+	if (of_find_property(client->dev.of_node, "linux,gpio-keymap",
+			     &proplen)) {
+		pdata->t19_num_keys = proplen / sizeof(u32);
+
+		keymap = devm_kzalloc(&client->dev,
+				pdata->t19_num_keys * sizeof(keymap[0]),
+				GFP_KERNEL);
+		if (!keymap)
+			return ERR_PTR(-ENOMEM);
+
+		for (i = 0; i < pdata->t19_num_keys; i++) {
+			ret = of_property_read_u32_index(client->dev.of_node,
+					"linux,gpio-keymap", i, &keycode);
+			if (ret)
+				keycode = KEY_RESERVED;
+
+			keymap[i] = keycode;
+		}
+
+		pdata->t19_keymap = keymap;
+	}
+
+	return pdata;
+}
+#else
+static const struct mxt_platform_data *mxt_parse_dt(struct i2c_client *client)
+{
+	return ERR_PTR(-ENOENT);
+}
+#endif
+
+#ifdef CONFIG_ACPI
+
+struct mxt_acpi_platform_data {
+	const char *hid;
+	struct mxt_platform_data pdata;
+};
+
+static unsigned int samus_touchpad_buttons[] = {
+	KEY_RESERVED,
+	KEY_RESERVED,
+	KEY_RESERVED,
+	BTN_LEFT
+};
+
+static struct mxt_acpi_platform_data samus_platform_data[] = {
+	{
+		/* Touchpad */
+		.hid	= "ATML0000",
+		.pdata	= {
+			.t19_num_keys	= ARRAY_SIZE(samus_touchpad_buttons),
+			.t19_keymap	= samus_touchpad_buttons,
+		},
+	},
+	{
+		/* Touchscreen */
+		.hid	= "ATML0001",
+	},
+	{ }
+};
+
+static const struct dmi_system_id mxt_dmi_table[] = {
+	{
+		/* 2015 Google Pixel */
+		.ident = "Chromebook Pixel 2",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "GOOGLE"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Samus"),
+		},
+		.driver_data = samus_platform_data,
+	},
+	{ }
+};
+
+static const struct mxt_platform_data *mxt_parse_acpi(struct i2c_client *client)
+{
+	struct acpi_device *adev;
+	const struct dmi_system_id *system_id;
+	const struct mxt_acpi_platform_data *acpi_pdata;
+
+	/*
+	 * Ignore ACPI devices representing bootloader mode.
+	 *
+	 * This is a bit of a hack: Google Chromebook BIOS creates ACPI
+	 * devices for both application and bootloader modes, but we are
+	 * interested in application mode only (if device is in bootloader
+	 * mode we'll end up switching into application anyway). So far
+	 * application mode addresses were all above 0x40, so we'll use it
+	 * as a threshold.
+	 */
+	if (client->addr < 0x40)
+		return ERR_PTR(-ENXIO);
+
+	adev = ACPI_COMPANION(&client->dev);
+	if (!adev)
+		return ERR_PTR(-ENOENT);
+
+	system_id = dmi_first_match(mxt_dmi_table);
+	if (!system_id)
+		return ERR_PTR(-ENOENT);
+
+	acpi_pdata = system_id->driver_data;
+	if (!acpi_pdata)
+		return ERR_PTR(-ENOENT);
+
+	while (acpi_pdata->hid) {
+		if (!strcmp(acpi_device_hid(adev), acpi_pdata->hid))
+			return &acpi_pdata->pdata;
+
+		acpi_pdata++;
+	}
+
+	return ERR_PTR(-ENOENT);
+}
+#else
+static const struct mxt_platform_data *mxt_parse_acpi(struct i2c_client *client)
+{
+	return ERR_PTR(-ENOENT);
+}
+#endif
+
+static const struct mxt_platform_data *
+mxt_get_platform_data(struct i2c_client *client)
+{
+	const struct mxt_platform_data *pdata;
+
+	pdata = dev_get_platdata(&client->dev);
+	if (pdata)
+		return pdata;
+
+	pdata = mxt_parse_dt(client);
+	if (!IS_ERR(pdata) || PTR_ERR(pdata) != -ENOENT)
+		return pdata;
+
+	pdata = mxt_parse_acpi(client);
+	if (!IS_ERR(pdata) || PTR_ERR(pdata) != -ENOENT)
+		return pdata;
+
+	dev_err(&client->dev, "No platform data specified\n");
+	return ERR_PTR(-EINVAL);
+}
+
+static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
+{
+	struct mxt_data *data;
+	const struct mxt_platform_data *pdata;
+	int error;
+
+	pdata = mxt_get_platform_data(client);
+	if (IS_ERR(pdata))
+		return PTR_ERR(pdata);
+
+	data = kzalloc(sizeof(struct mxt_data), GFP_KERNEL);
+	if (!data) {
+		dev_err(&client->dev, "Failed to allocate memory\n");
+		return -ENOMEM;
+	}
+
+	snprintf(data->phys, sizeof(data->phys), "i2c-%u-%04x/input0",
+		 client->adapter->nr, client->addr);
+
+	data->client = client;
+	data->pdata = pdata;
+	data->irq = client->irq;
+	i2c_set_clientdata(client, data);
+
+	init_completion(&data->bl_completion);
+	init_completion(&data->reset_completion);
+	init_completion(&data->crc_completion);
+
+	error = request_threaded_irq(client->irq, NULL, mxt_interrupt,
+				     pdata->irqflags | IRQF_ONESHOT,
+				     client->name, data);
+	if (error) {
+		dev_err(&client->dev, "Failed to register interrupt\n");
+		goto err_free_mem;
+	}
+
+	disable_irq(client->irq);
+
+	error = mxt_initialize(data);
+	if (error)
+		goto err_free_irq;
+
+	error = sysfs_create_group(&client->dev.kobj, &mxt_attr_group);
+	if (error) {
+		dev_err(&client->dev, "Failure %d creating sysfs group\n",
+			error);
+		goto err_free_object;
+	}
+
+	return 0;
+
+err_free_object:
+	mxt_free_input_device(data);
+	mxt_free_object_table(data);
+err_free_irq:
+	free_irq(client->irq, data);
+err_free_mem:
+	kfree(data);
+	return error;
+}
+
+static int mxt_remove(struct i2c_client *client)
+{
+	struct mxt_data *data = i2c_get_clientdata(client);
+
+	sysfs_remove_group(&client->dev.kobj, &mxt_attr_group);
+	free_irq(data->irq, data);
+	mxt_free_input_device(data);
+	mxt_free_object_table(data);
+	kfree(data);
+
+	return 0;
+}
+
+static int __maybe_unused mxt_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct mxt_data *data = i2c_get_clientdata(client);
+	struct input_dev *input_dev = data->input_dev;
+
+	mutex_lock(&input_dev->mutex);
+
+	if (input_dev->users)
+		mxt_stop(data);
+
+	mutex_unlock(&input_dev->mutex);
+
+	return 0;
+}
+
+static int __maybe_unused mxt_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct mxt_data *data = i2c_get_clientdata(client);
+	struct input_dev *input_dev = data->input_dev;
+
+	mxt_soft_reset(data);
+
+	mutex_lock(&input_dev->mutex);
+
+	if (input_dev->users)
+		mxt_start(data);
+
+	mutex_unlock(&input_dev->mutex);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(mxt_pm_ops, mxt_suspend, mxt_resume);
+
+static const struct of_device_id mxt_of_match[] = {
+	{ .compatible = "atmel,maxtouch", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, mxt_of_match);
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id mxt_acpi_id[] = {
+	{ "ATML0000", 0 },	/* Touchpad */
+	{ "ATML0001", 0 },	/* Touchscreen */
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, mxt_acpi_id);
+#endif
+
+static const struct i2c_device_id mxt_id[] = {
+	{ "qt602240_ts", 0 },
+	{ "atmel_mxt_ts", 0 },
+	{ "atmel_mxt_tp", 0 },
+	{ "mXT224", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, mxt_id);
+
+static struct i2c_driver mxt_driver = {
+	.driver = {
+		.name	= "atmel_mxt_ts",
+		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(mxt_of_match),
+		.acpi_match_table = ACPI_PTR(mxt_acpi_id),
+		.pm	= &mxt_pm_ops,
+	},
+	.probe		= mxt_probe,
+	.remove		= mxt_remove,
+	.id_table	= mxt_id,
+};
+
+module_i2c_driver(mxt_driver);
+
+/* Module information */
+MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>");
+MODULE_DESCRIPTION("Atmel maXTouch Touchscreen driver");
+MODULE_LICENSE("GPL");