Linux-libre 4.7.1-gnupck-4.7.1-gnu

1 files changed, 29 insertions, 4 deletions

diff --git a/drivers/irqchip/irq-gic-common.c b/drivers/irqchip/irq-gic-common.c
index f174ce0ca..89e7423f0 100644
--- a/drivers/irqchip/irq-gic-common.c
+++ b/drivers/irqchip/irq-gic-common.c
@@ -21,6 +21,19 @@
 
 #include "irq-gic-common.h"
 
+static const struct gic_kvm_info *gic_kvm_info;
+
+const struct gic_kvm_info *gic_get_kvm_info(void)
+{
+	return gic_kvm_info;
+}
+
+void gic_set_kvm_info(const struct gic_kvm_info *info)
+{
+	BUG_ON(gic_kvm_info != NULL);
+	gic_kvm_info = info;
+}
+
 void gic_enable_quirks(u32 iidr, const struct gic_quirk *quirks,
 		void *data)
 {
@@ -50,14 +63,26 @@ int gic_configure_irq(unsigned int irq, unsigned int type,
 	else if (type & IRQ_TYPE_EDGE_BOTH)
 		val |= confmask;
 
+	/* If the current configuration is the same, then we are done */
+	if (val == oldval)
+		return 0;
+
 	/*
 	 * Write back the new configuration, and possibly re-enable
-	 * the interrupt. If we tried to write a new configuration and failed,
-	 * return an error.
+	 * the interrupt. If we fail to write a new configuration for
+	 * an SPI then WARN and return an error. If we fail to write the
+	 * configuration for a PPI this is most likely because the GIC
+	 * does not allow us to set the configuration or we are in a
+	 * non-secure mode, and hence it may not be catastrophic.
 	 */
 	writel_relaxed(val, base + GIC_DIST_CONFIG + confoff);
-	if (readl_relaxed(base + GIC_DIST_CONFIG + confoff) != val && val != oldval)
-		ret = -EINVAL;
+	if (readl_relaxed(base + GIC_DIST_CONFIG + confoff) != val) {
+		if (WARN_ON(irq >= 32))
+			ret = -EINVAL;
+		else
+			pr_warn("GIC: PPI%d is secure or misconfigured\n",
+				irq - 16);
+	}
 
 	if (sync_access)
 		sync_access();