diff options
author | André Fabian Silva Delgado <emulatorman@parabola.nu> | 2015-08-05 17:04:01 -0300 |
---|---|---|
committer | André Fabian Silva Delgado <emulatorman@parabola.nu> | 2015-08-05 17:04:01 -0300 |
commit | 57f0f512b273f60d52568b8c6b77e17f5636edc0 (patch) | |
tree | 5e910f0e82173f4ef4f51111366a3f1299037a7b /drivers/isdn/hardware/eicon/xdi_msg.h |
Initial import
Diffstat (limited to 'drivers/isdn/hardware/eicon/xdi_msg.h')
-rw-r--r-- | drivers/isdn/hardware/eicon/xdi_msg.h | 127 |
1 files changed, 127 insertions, 0 deletions
diff --git a/drivers/isdn/hardware/eicon/xdi_msg.h b/drivers/isdn/hardware/eicon/xdi_msg.h new file mode 100644 index 000000000..2498c349a --- /dev/null +++ b/drivers/isdn/hardware/eicon/xdi_msg.h @@ -0,0 +1,127 @@ +/* $Id: xdi_msg.h,v 1.1.2.2 2001/02/16 08:40:36 armin Exp $ */ + +#ifndef __DIVA_XDI_UM_CFG_MESSAGE_H__ +#define __DIVA_XDI_UM_CFG_MESSAGE_H__ + +/* + Definition of messages used to communicate between + XDI device driver and user mode configuration utility +*/ + +/* + As acknowledge one DWORD - card ordinal will be read from the card +*/ +#define DIVA_XDI_UM_CMD_GET_CARD_ORDINAL 0 + +/* + no acknowledge will be generated, memory block will be written in the + memory at given offset +*/ +#define DIVA_XDI_UM_CMD_WRITE_SDRAM_BLOCK 1 + +/* + no acknowledge will be genatated, FPGA will be programmed +*/ +#define DIVA_XDI_UM_CMD_WRITE_FPGA 2 + +/* + As acknowledge block of SDRAM will be read in the user buffer +*/ +#define DIVA_XDI_UM_CMD_READ_SDRAM 3 + +/* + As acknowledge dword with serial number will be read in the user buffer +*/ +#define DIVA_XDI_UM_CMD_GET_SERIAL_NR 4 + +/* + As acknowledge struct consisting from 9 dwords with PCI info. + dword[0...7] = 8 PCI BARS + dword[9] = IRQ +*/ +#define DIVA_XDI_UM_CMD_GET_PCI_HW_CONFIG 5 + +/* + Reset of the board + activation of primary + boot loader +*/ +#define DIVA_XDI_UM_CMD_RESET_ADAPTER 6 + +/* + Called after code download to start adapter + at specified address + Start does set new set of features due to fact that we not know + if protocol features have changed +*/ +#define DIVA_XDI_UM_CMD_START_ADAPTER 7 + +/* + Stop adapter, called if user + wishes to stop adapter without unload + of the driver, to reload adapter with + different protocol +*/ +#define DIVA_XDI_UM_CMD_STOP_ADAPTER 8 + +/* + Get state of current adapter + Acknowledge is one dword with following values: + 0 - adapter ready for download + 1 - adapter running + 2 - adapter dead + 3 - out of service, driver should be restarted or hardware problem +*/ +#define DIVA_XDI_UM_CMD_GET_CARD_STATE 9 + +/* + Reads XLOG entry from the card +*/ +#define DIVA_XDI_UM_CMD_READ_XLOG_ENTRY 10 + +/* + Set untranslated protocol code features +*/ +#define DIVA_XDI_UM_CMD_SET_PROTOCOL_FEATURES 11 + +typedef struct _diva_xdi_um_cfg_cmd_data_set_features { + dword features; +} diva_xdi_um_cfg_cmd_data_set_features_t; + +typedef struct _diva_xdi_um_cfg_cmd_data_start { + dword offset; + dword features; +} diva_xdi_um_cfg_cmd_data_start_t; + +typedef struct _diva_xdi_um_cfg_cmd_data_write_sdram { + dword ram_number; + dword offset; + dword length; +} diva_xdi_um_cfg_cmd_data_write_sdram_t; + +typedef struct _diva_xdi_um_cfg_cmd_data_write_fpga { + dword fpga_number; + dword image_length; +} diva_xdi_um_cfg_cmd_data_write_fpga_t; + +typedef struct _diva_xdi_um_cfg_cmd_data_read_sdram { + dword ram_number; + dword offset; + dword length; +} diva_xdi_um_cfg_cmd_data_read_sdram_t; + +typedef union _diva_xdi_um_cfg_cmd_data { + diva_xdi_um_cfg_cmd_data_write_sdram_t write_sdram; + diva_xdi_um_cfg_cmd_data_write_fpga_t write_fpga; + diva_xdi_um_cfg_cmd_data_read_sdram_t read_sdram; + diva_xdi_um_cfg_cmd_data_start_t start; + diva_xdi_um_cfg_cmd_data_set_features_t features; +} diva_xdi_um_cfg_cmd_data_t; + +typedef struct _diva_xdi_um_cfg_cmd { + dword adapter; /* Adapter number 1...N */ + dword command; + diva_xdi_um_cfg_cmd_data_t command_data; + dword data_length; /* Plain binary data will follow */ +} diva_xdi_um_cfg_cmd_t; + +#endif |