diff options
author | André Fabian Silva Delgado <emulatorman@parabola.nu> | 2015-08-05 17:04:01 -0300 |
---|---|---|
committer | André Fabian Silva Delgado <emulatorman@parabola.nu> | 2015-08-05 17:04:01 -0300 |
commit | 57f0f512b273f60d52568b8c6b77e17f5636edc0 (patch) | |
tree | 5e910f0e82173f4ef4f51111366a3f1299037a7b /drivers/macintosh/Kconfig |
Initial import
Diffstat (limited to 'drivers/macintosh/Kconfig')
-rw-r--r-- | drivers/macintosh/Kconfig | 303 |
1 files changed, 303 insertions, 0 deletions
diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig new file mode 100644 index 000000000..e5b760ad8 --- /dev/null +++ b/drivers/macintosh/Kconfig @@ -0,0 +1,303 @@ + +menuconfig MACINTOSH_DRIVERS + bool "Macintosh device drivers" + depends on PPC || MAC || X86 + default y if (PPC_PMAC || MAC) + ---help--- + Say Y here to get to see options for devices used with Macintosh + computers. This option alone does not add any kernel code. + + If you say N, all options in this submenu will be skipped and disabled. + +if MACINTOSH_DRIVERS + +config ADB + bool "Apple Desktop Bus (ADB) support" + depends on MAC || (PPC_PMAC && PPC32) + help + Apple Desktop Bus (ADB) support is for support of devices which + are connected to an ADB port. ADB devices tend to have 4 pins. + If you have an Apple Macintosh prior to the iMac, an iBook or + PowerBook, or a "Blue and White G3", you probably want to say Y + here. Otherwise say N. + +config ADB_MACII + bool "Include Mac II ADB driver" + depends on ADB && MAC + help + Say Y here if want your kernel to support Macintosh systems that use + the Mac II style ADB. This includes the II, IIx, IIcx, SE/30, IIci, + Quadra 610, Quadra 650, Quadra 700, Quadra 800, Centris 610 and + Centris 650. + +config ADB_MACIISI + bool "Include Mac IIsi ADB driver" + depends on ADB && MAC && BROKEN + help + Say Y here if want your kernel to support Macintosh systems that use + the Mac IIsi style ADB. This includes the IIsi, IIvi, IIvx, Classic + II, LC, LC II, LC III, Performa 460, and the Performa 600. + +config ADB_IOP + bool "Include IOP (IIfx/Quadra 9x0) ADB driver" + depends on ADB && MAC + help + The I/O Processor (IOP) is an Apple custom IC designed to provide + intelligent support for I/O controllers. It is described at + <http://www.angelfire.com/ca2/dev68k/iopdesc.html> to enable direct + support for it, say 'Y' here. + +config ADB_PMU68K + bool "Include PMU (Powerbook) ADB driver" + depends on ADB && MAC + help + Say Y here if want your kernel to support the m68k based Powerbooks. + This includes the PowerBook 140, PowerBook 145, PowerBook 150, + PowerBook 160, PowerBook 165, PowerBook 165c, PowerBook 170, + PowerBook 180, PowerBook, 180c, PowerBook 190cs, PowerBook 520, + PowerBook Duo 210, PowerBook Duo 230, PowerBook Duo 250, + PowerBook Duo 270c, PowerBook Duo 280 and PowerBook Duo 280c. + +# we want to change this to something like CONFIG_SYSCTRL_CUDA/PMU +config ADB_CUDA + bool "Support for CUDA based Macs and PowerMacs" + depends on (ADB || PPC_PMAC) && !PPC_PMAC64 + help + This provides support for CUDA based Macintosh and Power Macintosh + systems. This includes many m68k based Macs (Color Classic, Mac TV, + Performa 475, Performa 520, Performa 550, Performa 575, + Performa 588, Quadra 605, Quadra 630, Quadra/Centris 660AV, and + Quadra 840AV), most OldWorld PowerMacs, the first generation iMacs, + the Blue&White G3 and the "Yikes" G4 (PCI Graphics). All later + models should use CONFIG_ADB_PMU instead. It is safe to say Y here + even if your machine doesn't have a CUDA. + + If unsure say Y. + +config ADB_PMU + bool "Support for PMU based PowerMacs" + depends on PPC_PMAC + help + On PowerBooks, iBooks, and recent iMacs and Power Macintoshes, the + PMU is an embedded microprocessor whose primary function is to + control system power, and battery charging on the portable models. + The PMU also controls the ADB (Apple Desktop Bus) which connects to + the keyboard and mouse on some machines, as well as the non-volatile + RAM and the RTC (real time clock) chip. Say Y to enable support for + this device; you should do so if your machine is one of those + mentioned above. + +config ADB_PMU_LED + bool "Support for the Power/iBook front LED" + depends on ADB_PMU + select NEW_LEDS + select LEDS_CLASS + help + Support the front LED on Power/iBooks as a generic LED that can + be triggered by any of the supported triggers. To get the + behaviour of the old CONFIG_BLK_DEV_IDE_PMAC_BLINK, select this + and the ide-disk LED trigger and configure appropriately through + sysfs. + +config ADB_PMU_LED_IDE + bool "Use front LED as IDE LED by default" + depends on ADB_PMU_LED + depends on LEDS_CLASS + depends on IDE_GD_ATA + select LEDS_TRIGGERS + select LEDS_TRIGGER_IDE_DISK + help + This option makes the front LED default to the IDE trigger + so that it blinks on IDE activity. + +config PMAC_SMU + bool "Support for SMU based PowerMacs" + depends on PPC_PMAC64 + help + This option adds support for the newer G5 iMacs and PowerMacs based + on the "SMU" system control chip which replaces the old PMU. + If you don't know, say Y. + +config PMAC_APM_EMU + tristate "APM emulation" + select APM_EMULATION + depends on ADB_PMU && PM && PPC32 + +config PMAC_MEDIABAY + bool "Support PowerBook hotswap media bay" + depends on PPC_PMAC && PPC32 && BLOCK + help + This option adds support for older PowerBook's hotswap media bay + that can contains batteries, floppy drives, or IDE devices. PCI + devices are not fully supported in the bay as I never had one to + try with + +config PMAC_BACKLIGHT + bool "Backlight control for LCD screens" + depends on ADB_PMU && FB = y && (BROKEN || !PPC64) + select FB_BACKLIGHT + help + Say Y here to enable Macintosh specific extensions of the generic + backlight code. With this enabled, the brightness keys on older + PowerBooks will be enabled so you can change the screen brightness. + Newer models should use a userspace daemon like pbbuttonsd. + +config PMAC_BACKLIGHT_LEGACY + bool "Provide legacy ioctl's on /dev/pmu for the backlight" + depends on PMAC_BACKLIGHT && (BROKEN || !PPC64) + help + Say Y if you want to enable legacy ioctl's on /dev/pmu. This is for + programs which use this old interface. New and updated programs + should use the backlight classes in sysfs. + +config ADB_MACIO + bool "Include MacIO (CHRP) ADB driver" + depends on ADB && PPC_CHRP && !PPC_PMAC64 + help + Say Y here to include direct support for the ADB controller in the + Hydra chip used on PowerPC Macintoshes of the CHRP type. (The Hydra + also includes a MESH II SCSI controller, DBDMA controller, VIA chip, + OpenPIC controller and two RS422/Geoports.) + +config INPUT_ADBHID + bool "Support for ADB input devices (keyboard, mice, ...)" + depends on ADB && INPUT=y + help + Say Y here if you want to have ADB (Apple Desktop Bus) HID devices + such as keyboards, mice, joysticks, trackpads or graphic tablets + handled by the input layer. If you say Y here, make sure to say Y to + the corresponding drivers "Keyboard support" (CONFIG_INPUT_KEYBDEV), + "Mouse Support" (CONFIG_INPUT_MOUSEDEV) and "Event interface + support" (CONFIG_INPUT_EVDEV) as well. + + If unsure, say Y. + +config ADB_TRACKPAD_ABSOLUTE + bool "Enable absolute mode for adb trackpads" + depends on INPUT_ADBHID + help + Enable absolute mode in adb-base trackpads. This feature adds + compatibility with synaptics Xorg / Xfree drivers. + +config MAC_EMUMOUSEBTN + tristate "Support for mouse button 2+3 emulation" + depends on SYSCTL && INPUT + help + This provides generic support for emulating the 2nd and 3rd mouse + button with keypresses. If you say Y here, the emulation is still + disabled by default. The emulation is controlled by these sysctl + entries: + /proc/sys/dev/mac_hid/mouse_button_emulation + /proc/sys/dev/mac_hid/mouse_button2_keycode + /proc/sys/dev/mac_hid/mouse_button3_keycode + + If you have an Apple machine with a 1-button mouse, say Y here. + + To compile this driver as a module, choose M here: the + module will be called mac_hid. + +config THERM_WINDTUNNEL + tristate "Support for thermal management on Windtunnel G4s" + depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64 + help + This driver provides some thermostat and fan control for the desktop + G4 "Windtunnel" + +config THERM_ADT746X + tristate "Support for thermal mgmnt on laptops with ADT 746x chipset" + depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64 + help + This driver provides some thermostat and fan control for the + iBook G4, and the ATI based aluminium PowerBooks, allowing slightly + better fan behaviour by default, and some manual control. + +config WINDFARM + tristate "New PowerMac thermal control infrastructure" + depends on PPC + +config WINDFARM_PM81 + tristate "Support for thermal management on iMac G5" + depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU + select I2C_POWERMAC + help + This driver provides thermal control for the iMacG5 + +config WINDFARM_PM72 + tristate "Support for thermal management on PowerMac G5 (AGP)" + depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && ADB_PMU + select I2C_POWERMAC + help + This driver provides thermal control for the PowerMac G5 + "AGP" variants (PowerMac 7,2 and 7,3) + +config WINDFARM_RM31 + tristate "Support for thermal management on Xserve G5" + depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && ADB_PMU + select I2C_POWERMAC + help + This driver provides thermal control for the Xserve G5 + (RackMac3,1) + +config WINDFARM_PM91 + tristate "Support for thermal management on PowerMac9,1" + depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU + select I2C_POWERMAC + help + This driver provides thermal control for the PowerMac9,1 + which is the recent (SMU based) single CPU desktop G5 + +config WINDFARM_PM112 + tristate "Support for thermal management on PowerMac11,2" + depends on WINDFARM && I2C && PMAC_SMU + select I2C_POWERMAC + help + This driver provides thermal control for the PowerMac11,2 + which are the recent dual and quad G5 machines using the + 970MP dual-core processor. + +config WINDFARM_PM121 + tristate "Support for thermal management on PowerMac12,1" + depends on WINDFARM && I2C && PMAC_SMU + select I2C_POWERMAC + help + This driver provides thermal control for the PowerMac12,1 + which is the iMac G5 (iSight). + +config ANSLCD + tristate "Support for ANS LCD display" + depends on ADB_CUDA && PPC_PMAC + +config PMAC_RACKMETER + tristate "Support for Apple XServe front panel LEDs" + depends on PPC_PMAC + help + This driver provides some support to control the front panel + blue LEDs "vu-meter" of the XServer macs. + +config SENSORS_AMS + tristate "Apple Motion Sensor driver" + depends on PPC_PMAC && !PPC64 && INPUT && ((ADB_PMU && I2C = y) || (ADB_PMU && !I2C) || I2C) + select INPUT_POLLDEV + help + Support for the motion sensor included in PowerBooks. Includes + implementations for PMU and I2C. + + This driver can also be built as a module. If so, the module + will be called ams. + +config SENSORS_AMS_PMU + bool "PMU variant" + depends on SENSORS_AMS && ADB_PMU + default y + help + PMU variant of motion sensor, found in late 2005 PowerBooks. + +config SENSORS_AMS_I2C + bool "I2C variant" + depends on SENSORS_AMS && I2C + default y + help + I2C variant of motion sensor, found in early 2005 PowerBooks and + iBooks. + +endif # MACINTOSH_DRIVERS |