Initial import

1 files changed, 147 insertions, 0 deletions

diff --git a/drivers/media/common/b2c2/flexcop-eeprom.c b/drivers/media/common/b2c2/flexcop-eeprom.c
new file mode 100644
index 000000000..a25373a9b
--- /dev/null
+++ b/drivers/media/common/b2c2/flexcop-eeprom.c
@@ -0,0 +1,147 @@
+/*
+ * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
+ * flexcop-eeprom.c - eeprom access methods (currently only MAC address reading)
+ * see flexcop.c for copyright information
+ */
+#include "flexcop.h"
+
+#if 0
+/*EEPROM (Skystar2 has one "24LC08B" chip on board) */
+static int eeprom_write(struct adapter *adapter, u16 addr, u8 *buf, u16 len)
+{
+	return flex_i2c_write(adapter, 0x20000000, 0x50, addr, buf, len);
+}
+
+static int eeprom_lrc_write(struct adapter *adapter, u32 addr,
+		u32 len, u8 *wbuf, u8 *rbuf, int retries)
+{
+int i;
+
+for (i = 0; i < retries; i++) {
+	if (eeprom_write(adapter, addr, wbuf, len) == len) {
+		if (eeprom_lrc_read(adapter, addr, len, rbuf, retries) == 1)
+			return 1;
+		}
+	}
+	return 0;
+}
+
+/* These functions could be used to unlock SkyStar2 cards. */
+
+static int eeprom_writeKey(struct adapter *adapter, u8 *key, u32 len)
+{
+	u8 rbuf[20];
+	u8 wbuf[20];
+
+	if (len != 16)
+		return 0;
+
+	memcpy(wbuf, key, len);
+	wbuf[16] = 0;
+	wbuf[17] = 0;
+	wbuf[18] = 0;
+	wbuf[19] = calc_lrc(wbuf, 19);
+	return eeprom_lrc_write(adapter, 0x3e4, 20, wbuf, rbuf, 4);
+}
+
+static int eeprom_readKey(struct adapter *adapter, u8 *key, u32 len)
+{
+	u8 buf[20];
+
+	if (len != 16)
+		return 0;
+
+	if (eeprom_lrc_read(adapter, 0x3e4, 20, buf, 4) == 0)
+		return 0;
+
+	memcpy(key, buf, len);
+	return 1;
+}
+
+static char eeprom_set_mac_addr(struct adapter *adapter, char type, u8 *mac)
+{
+	u8 tmp[8];
+
+	if (type != 0) {
+		tmp[0] = mac[0];
+		tmp[1] = mac[1];
+		tmp[2] = mac[2];
+		tmp[3] = mac[5];
+		tmp[4] = mac[6];
+		tmp[5] = mac[7];
+	} else {
+		tmp[0] = mac[0];
+		tmp[1] = mac[1];
+		tmp[2] = mac[2];
+		tmp[3] = mac[3];
+		tmp[4] = mac[4];
+		tmp[5] = mac[5];
+	}
+
+	tmp[6] = 0;
+	tmp[7] = calc_lrc(tmp, 7);
+
+	if (eeprom_write(adapter, 0x3f8, tmp, 8) == 8)
+		return 1;
+	return 0;
+}
+
+static int flexcop_eeprom_read(struct flexcop_device *fc,
+		u16 addr, u8 *buf, u16 len)
+{
+	return fc->i2c_request(fc,FC_READ,FC_I2C_PORT_EEPROM,0x50,addr,buf,len);
+}
+
+#endif
+
+static u8 calc_lrc(u8 *buf, int len)
+{
+	int i;
+	u8 sum = 0;
+	for (i = 0; i < len; i++)
+		sum = sum ^ buf[i];
+	return sum;
+}
+
+static int flexcop_eeprom_request(struct flexcop_device *fc,
+	flexcop_access_op_t op, u16 addr, u8 *buf, u16 len, int retries)
+{
+	int i,ret = 0;
+	u8 chipaddr =  0x50 | ((addr >> 8) & 3);
+	for (i = 0; i < retries; i++) {
+		ret = fc->i2c_request(&fc->fc_i2c_adap[1], op, chipaddr,
+			addr & 0xff, buf, len);
+		if (ret == 0)
+			break;
+	}
+	return ret;
+}
+
+static int flexcop_eeprom_lrc_read(struct flexcop_device *fc, u16 addr,
+		u8 *buf, u16 len, int retries)
+{
+	int ret = flexcop_eeprom_request(fc, FC_READ, addr, buf, len, retries);
+	if (ret == 0)
+		if (calc_lrc(buf, len - 1) != buf[len - 1])
+			ret = -EINVAL;
+	return ret;
+}
+
+/* JJ's comment about extended == 1: it is not presently used anywhere but was
+ * added to the low-level functions for possible support of EUI64 */
+int flexcop_eeprom_check_mac_addr(struct flexcop_device *fc, int extended)
+{
+	u8 buf[8];
+	int ret = 0;
+
+	if ((ret = flexcop_eeprom_lrc_read(fc,0x3f8,buf,8,4)) == 0) {
+		if (extended != 0) {
+			err("TODO: extended (EUI64) MAC addresses aren't "
+				"completely supported yet");
+			ret = -EINVAL;
+		} else
+			memcpy(fc->dvb_adapter.proposed_mac,buf,6);
+	}
+	return ret;
+}
+EXPORT_SYMBOL(flexcop_eeprom_check_mac_addr);