Initial import

8 files changed, 4527 insertions, 0 deletions

diff --git a/drivers/media/common/saa7146/Kconfig b/drivers/media/common/saa7146/Kconfig
new file mode 100644
index 000000000..769c6f814
--- /dev/null
+++ b/drivers/media/common/saa7146/Kconfig
@@ -0,0 +1,9 @@
+config VIDEO_SAA7146
+	tristate
+	depends on I2C && PCI
+
+config VIDEO_SAA7146_VV
+	tristate
+	depends on VIDEO_V4L2
+	select VIDEOBUF_DMA_SG
+	select VIDEO_SAA7146
diff --git a/drivers/media/common/saa7146/Makefile b/drivers/media/common/saa7146/Makefile
new file mode 100644
index 000000000..3219b00a8
--- /dev/null
+++ b/drivers/media/common/saa7146/Makefile
@@ -0,0 +1,5 @@
+saa7146-objs    := saa7146_i2c.o saa7146_core.o
+saa7146_vv-objs := saa7146_fops.o saa7146_video.o saa7146_hlp.o saa7146_vbi.o
+
+obj-$(CONFIG_VIDEO_SAA7146) += saa7146.o
+obj-$(CONFIG_VIDEO_SAA7146_VV) += saa7146_vv.o
diff --git a/drivers/media/common/saa7146/saa7146_core.c b/drivers/media/common/saa7146/saa7146_core.c
new file mode 100644
index 000000000..1ff9f5323
--- /dev/null
+++ b/drivers/media/common/saa7146/saa7146_core.c
@@ -0,0 +1,587 @@
+/*
+    saa7146.o - driver for generic saa7146-based hardware
+
+    Copyright (C) 1998-2003 Michael Hunold <michael@mihu.de>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <media/saa7146.h>
+#include <linux/module.h>
+
+static int saa7146_num;
+
+unsigned int saa7146_debug;
+
+module_param(saa7146_debug, uint, 0644);
+MODULE_PARM_DESC(saa7146_debug, "debug level (default: 0)");
+
+#if 0
+static void dump_registers(struct saa7146_dev* dev)
+{
+	int i = 0;
+
+	pr_info(" @ %li jiffies:\n", jiffies);
+	for (i = 0; i <= 0x148; i += 4)
+		pr_info("0x%03x: 0x%08x\n", i, saa7146_read(dev, i));
+}
+#endif
+
+/****************************************************************************
+ * gpio and debi helper functions
+ ****************************************************************************/
+
+void saa7146_setgpio(struct saa7146_dev *dev, int port, u32 data)
+{
+	u32 value = 0;
+
+	BUG_ON(port > 3);
+
+	value = saa7146_read(dev, GPIO_CTRL);
+	value &= ~(0xff << (8*port));
+	value |= (data << (8*port));
+	saa7146_write(dev, GPIO_CTRL, value);
+}
+
+/* This DEBI code is based on the saa7146 Stradis driver by Nathan Laredo */
+static inline int saa7146_wait_for_debi_done_sleep(struct saa7146_dev *dev,
+				unsigned long us1, unsigned long us2)
+{
+	unsigned long timeout;
+	int err;
+
+	/* wait for registers to be programmed */
+	timeout = jiffies + usecs_to_jiffies(us1);
+	while (1) {
+		err = time_after(jiffies, timeout);
+		if (saa7146_read(dev, MC2) & 2)
+			break;
+		if (err) {
+			pr_debug("%s: %s timed out while waiting for registers getting programmed\n",
+			       dev->name, __func__);
+			return -ETIMEDOUT;
+		}
+		msleep(1);
+	}
+
+	/* wait for transfer to complete */
+	timeout = jiffies + usecs_to_jiffies(us2);
+	while (1) {
+		err = time_after(jiffies, timeout);
+		if (!(saa7146_read(dev, PSR) & SPCI_DEBI_S))
+			break;
+		saa7146_read(dev, MC2);
+		if (err) {
+			DEB_S("%s: %s timed out while waiting for transfer completion\n",
+			      dev->name, __func__);
+			return -ETIMEDOUT;
+		}
+		msleep(1);
+	}
+
+	return 0;
+}
+
+static inline int saa7146_wait_for_debi_done_busyloop(struct saa7146_dev *dev,
+				unsigned long us1, unsigned long us2)
+{
+	unsigned long loops;
+
+	/* wait for registers to be programmed */
+	loops = us1;
+	while (1) {
+		if (saa7146_read(dev, MC2) & 2)
+			break;
+		if (!loops--) {
+			pr_err("%s: %s timed out while waiting for registers getting programmed\n",
+			       dev->name, __func__);
+			return -ETIMEDOUT;
+		}
+		udelay(1);
+	}
+
+	/* wait for transfer to complete */
+	loops = us2 / 5;
+	while (1) {
+		if (!(saa7146_read(dev, PSR) & SPCI_DEBI_S))
+			break;
+		saa7146_read(dev, MC2);
+		if (!loops--) {
+			DEB_S("%s: %s timed out while waiting for transfer completion\n",
+			      dev->name, __func__);
+			return -ETIMEDOUT;
+		}
+		udelay(5);
+	}
+
+	return 0;
+}
+
+int saa7146_wait_for_debi_done(struct saa7146_dev *dev, int nobusyloop)
+{
+	if (nobusyloop)
+		return saa7146_wait_for_debi_done_sleep(dev, 50000, 250000);
+	else
+		return saa7146_wait_for_debi_done_busyloop(dev, 50000, 250000);
+}
+
+/****************************************************************************
+ * general helper functions
+ ****************************************************************************/
+
+/* this is videobuf_vmalloc_to_sg() from videobuf-dma-sg.c
+   make sure virt has been allocated with vmalloc_32(), otherwise the BUG()
+   may be triggered on highmem machines */
+static struct scatterlist* vmalloc_to_sg(unsigned char *virt, int nr_pages)
+{
+	struct scatterlist *sglist;
+	struct page *pg;
+	int i;
+
+	sglist = kcalloc(nr_pages, sizeof(struct scatterlist), GFP_KERNEL);
+	if (NULL == sglist)
+		return NULL;
+	sg_init_table(sglist, nr_pages);
+	for (i = 0; i < nr_pages; i++, virt += PAGE_SIZE) {
+		pg = vmalloc_to_page(virt);
+		if (NULL == pg)
+			goto err;
+		BUG_ON(PageHighMem(pg));
+		sg_set_page(&sglist[i], pg, PAGE_SIZE, 0);
+	}
+	return sglist;
+
+ err:
+	kfree(sglist);
+	return NULL;
+}
+
+/********************************************************************************/
+/* common page table functions */
+
+void *saa7146_vmalloc_build_pgtable(struct pci_dev *pci, long length, struct saa7146_pgtable *pt)
+{
+	int pages = (length+PAGE_SIZE-1)/PAGE_SIZE;
+	void *mem = vmalloc_32(length);
+	int slen = 0;
+
+	if (NULL == mem)
+		goto err_null;
+
+	if (!(pt->slist = vmalloc_to_sg(mem, pages)))
+		goto err_free_mem;
+
+	if (saa7146_pgtable_alloc(pci, pt))
+		goto err_free_slist;
+
+	pt->nents = pages;
+	slen = pci_map_sg(pci,pt->slist,pt->nents,PCI_DMA_FROMDEVICE);
+	if (0 == slen)
+		goto err_free_pgtable;
+
+	if (0 != saa7146_pgtable_build_single(pci, pt, pt->slist, slen))
+		goto err_unmap_sg;
+
+	return mem;
+
+err_unmap_sg:
+	pci_unmap_sg(pci, pt->slist, pt->nents, PCI_DMA_FROMDEVICE);
+err_free_pgtable:
+	saa7146_pgtable_free(pci, pt);
+err_free_slist:
+	kfree(pt->slist);
+	pt->slist = NULL;
+err_free_mem:
+	vfree(mem);
+err_null:
+	return NULL;
+}
+
+void saa7146_vfree_destroy_pgtable(struct pci_dev *pci, void *mem, struct saa7146_pgtable *pt)
+{
+	pci_unmap_sg(pci, pt->slist, pt->nents, PCI_DMA_FROMDEVICE);
+	saa7146_pgtable_free(pci, pt);
+	kfree(pt->slist);
+	pt->slist = NULL;
+	vfree(mem);
+}
+
+void saa7146_pgtable_free(struct pci_dev *pci, struct saa7146_pgtable *pt)
+{
+	if (NULL == pt->cpu)
+		return;
+	pci_free_consistent(pci, pt->size, pt->cpu, pt->dma);
+	pt->cpu = NULL;
+}
+
+int saa7146_pgtable_alloc(struct pci_dev *pci, struct saa7146_pgtable *pt)
+{
+	__le32       *cpu;
+	dma_addr_t   dma_addr = 0;
+
+	cpu = pci_alloc_consistent(pci, PAGE_SIZE, &dma_addr);
+	if (NULL == cpu) {
+		return -ENOMEM;
+	}
+	pt->size = PAGE_SIZE;
+	pt->cpu  = cpu;
+	pt->dma  = dma_addr;
+
+	return 0;
+}
+
+int saa7146_pgtable_build_single(struct pci_dev *pci, struct saa7146_pgtable *pt,
+	struct scatterlist *list, int sglen  )
+{
+	__le32 *ptr, fill;
+	int nr_pages = 0;
+	int i,p;
+
+	BUG_ON(0 == sglen);
+	BUG_ON(list->offset > PAGE_SIZE);
+
+	/* if we have a user buffer, the first page may not be
+	   aligned to a page boundary. */
+	pt->offset = list->offset;
+
+	ptr = pt->cpu;
+	for (i = 0; i < sglen; i++, list++) {
+/*
+		pr_debug("i:%d, adr:0x%08x, len:%d, offset:%d\n",
+			 i, sg_dma_address(list), sg_dma_len(list),
+			 list->offset);
+*/
+		for (p = 0; p * 4096 < list->length; p++, ptr++) {
+			*ptr = cpu_to_le32(sg_dma_address(list) + p * 4096);
+			nr_pages++;
+		}
+	}
+
+
+	/* safety; fill the page table up with the last valid page */
+	fill = *(ptr-1);
+	for(i=nr_pages;i<1024;i++) {
+		*ptr++ = fill;
+	}
+
+/*
+	ptr = pt->cpu;
+	pr_debug("offset: %d\n", pt->offset);
+	for(i=0;i<5;i++) {
+		pr_debug("ptr1 %d: 0x%08x\n", i, ptr[i]);
+	}
+*/
+	return 0;
+}
+
+/********************************************************************************/
+/* interrupt handler */
+static irqreturn_t interrupt_hw(int irq, void *dev_id)
+{
+	struct saa7146_dev *dev = dev_id;
+	u32 isr;
+	u32 ack_isr;
+
+	/* read out the interrupt status register */
+	ack_isr = isr = saa7146_read(dev, ISR);
+
+	/* is this our interrupt? */
+	if ( 0 == isr ) {
+		/* nope, some other device */
+		return IRQ_NONE;
+	}
+
+	if (dev->ext) {
+		if (dev->ext->irq_mask & isr) {
+			if (dev->ext->irq_func)
+				dev->ext->irq_func(dev, &isr);
+			isr &= ~dev->ext->irq_mask;
+		}
+	}
+	if (0 != (isr & (MASK_27))) {
+		DEB_INT("irq: RPS0 (0x%08x)\n", isr);
+		if (dev->vv_data && dev->vv_callback)
+			dev->vv_callback(dev,isr);
+		isr &= ~MASK_27;
+	}
+	if (0 != (isr & (MASK_28))) {
+		if (dev->vv_data && dev->vv_callback)
+			dev->vv_callback(dev,isr);
+		isr &= ~MASK_28;
+	}
+	if (0 != (isr & (MASK_16|MASK_17))) {
+		SAA7146_IER_DISABLE(dev, MASK_16|MASK_17);
+		/* only wake up if we expect something */
+		if (0 != dev->i2c_op) {
+			dev->i2c_op = 0;
+			wake_up(&dev->i2c_wq);
+		} else {
+			u32 psr = saa7146_read(dev, PSR);
+			u32 ssr = saa7146_read(dev, SSR);
+			pr_warn("%s: unexpected i2c irq: isr %08x psr %08x ssr %08x\n",
+				dev->name, isr, psr, ssr);
+		}
+		isr &= ~(MASK_16|MASK_17);
+	}
+	if( 0 != isr ) {
+		ERR("warning: interrupt enabled, but not handled properly.(0x%08x)\n",
+		    isr);
+		ERR("disabling interrupt source(s)!\n");
+		SAA7146_IER_DISABLE(dev,isr);
+	}
+	saa7146_write(dev, ISR, ack_isr);
+	return IRQ_HANDLED;
+}
+
+/*********************************************************************************/
+/* configuration-functions                                                       */
+
+static int saa7146_init_one(struct pci_dev *pci, const struct pci_device_id *ent)
+{
+	struct saa7146_pci_extension_data *pci_ext = (struct saa7146_pci_extension_data *)ent->driver_data;
+	struct saa7146_extension *ext = pci_ext->ext;
+	struct saa7146_dev *dev;
+	int err = -ENOMEM;
+
+	/* clear out mem for sure */
+	dev = kzalloc(sizeof(struct saa7146_dev), GFP_KERNEL);
+	if (!dev) {
+		ERR("out of memory\n");
+		goto out;
+	}
+
+	/* create a nice device name */
+	sprintf(dev->name, "saa7146 (%d)", saa7146_num);
+
+	DEB_EE("pci:%p\n", pci);
+
+	err = pci_enable_device(pci);
+	if (err < 0) {
+		ERR("pci_enable_device() failed\n");
+		goto err_free;
+	}
+
+	/* enable bus-mastering */
+	pci_set_master(pci);
+
+	dev->pci = pci;
+
+	/* get chip-revision; this is needed to enable bug-fixes */
+	dev->revision = pci->revision;
+
+	/* remap the memory from virtual to physical address */
+
+	err = pci_request_region(pci, 0, "saa7146");
+	if (err < 0)
+		goto err_disable;
+
+	dev->mem = ioremap(pci_resource_start(pci, 0),
+			   pci_resource_len(pci, 0));
+	if (!dev->mem) {
+		ERR("ioremap() failed\n");
+		err = -ENODEV;
+		goto err_release;
+	}
+
+	/* we don't do a master reset here anymore, it screws up
+	   some boards that don't have an i2c-eeprom for configuration
+	   values */
+/*
+	saa7146_write(dev, MC1, MASK_31);
+*/
+
+	/* disable all irqs */
+	saa7146_write(dev, IER, 0);
+
+	/* shut down all dma transfers and rps tasks */
+	saa7146_write(dev, MC1, 0x30ff0000);
+
+	/* clear out any rps-signals pending */
+	saa7146_write(dev, MC2, 0xf8000000);
+
+	/* request an interrupt for the saa7146 */
+	err = request_irq(pci->irq, interrupt_hw, IRQF_SHARED,
+			  dev->name, dev);
+	if (err < 0) {
+		ERR("request_irq() failed\n");
+		goto err_unmap;
+	}
+
+	err = -ENOMEM;
+
+	/* get memory for various stuff */
+	dev->d_rps0.cpu_addr = pci_zalloc_consistent(pci, SAA7146_RPS_MEM,
+						     &dev->d_rps0.dma_handle);
+	if (!dev->d_rps0.cpu_addr)
+		goto err_free_irq;
+
+	dev->d_rps1.cpu_addr = pci_zalloc_consistent(pci, SAA7146_RPS_MEM,
+						     &dev->d_rps1.dma_handle);
+	if (!dev->d_rps1.cpu_addr)
+		goto err_free_rps0;
+
+	dev->d_i2c.cpu_addr = pci_zalloc_consistent(pci, SAA7146_RPS_MEM,
+						    &dev->d_i2c.dma_handle);
+	if (!dev->d_i2c.cpu_addr)
+		goto err_free_rps1;
+
+	/* the rest + print status message */
+
+	pr_info("found saa7146 @ mem %p (revision %d, irq %d) (0x%04x,0x%04x)\n",
+		dev->mem, dev->revision, pci->irq,
+		pci->subsystem_vendor, pci->subsystem_device);
+	dev->ext = ext;
+
+	mutex_init(&dev->v4l2_lock);
+	spin_lock_init(&dev->int_slock);
+	spin_lock_init(&dev->slock);
+
+	mutex_init(&dev->i2c_lock);
+
+	dev->module = THIS_MODULE;
+	init_waitqueue_head(&dev->i2c_wq);
+
+	/* set some sane pci arbitrition values */
+	saa7146_write(dev, PCI_BT_V1, 0x1c00101f);
+
+	/* TODO: use the status code of the callback */
+
+	err = -ENODEV;
+
+	if (ext->probe && ext->probe(dev)) {
+		DEB_D("ext->probe() failed for %p. skipping device.\n", dev);
+		goto err_free_i2c;
+	}
+
+	if (ext->attach(dev, pci_ext)) {
+		DEB_D("ext->attach() failed for %p. skipping device.\n", dev);
+		goto err_free_i2c;
+	}
+	/* V4L extensions will set the pci drvdata to the v4l2_device in the
+	   attach() above. So for those cards that do not use V4L we have to
+	   set it explicitly. */
+	pci_set_drvdata(pci, &dev->v4l2_dev);
+
+	saa7146_num++;
+
+	err = 0;
+out:
+	return err;
+
+err_free_i2c:
+	pci_free_consistent(pci, SAA7146_RPS_MEM, dev->d_i2c.cpu_addr,
+			    dev->d_i2c.dma_handle);
+err_free_rps1:
+	pci_free_consistent(pci, SAA7146_RPS_MEM, dev->d_rps1.cpu_addr,
+			    dev->d_rps1.dma_handle);
+err_free_rps0:
+	pci_free_consistent(pci, SAA7146_RPS_MEM, dev->d_rps0.cpu_addr,
+			    dev->d_rps0.dma_handle);
+err_free_irq:
+	free_irq(pci->irq, (void *)dev);
+err_unmap:
+	iounmap(dev->mem);
+err_release:
+	pci_release_region(pci, 0);
+err_disable:
+	pci_disable_device(pci);
+err_free:
+	kfree(dev);
+	goto out;
+}
+
+static void saa7146_remove_one(struct pci_dev *pdev)
+{
+	struct v4l2_device *v4l2_dev = pci_get_drvdata(pdev);
+	struct saa7146_dev *dev = to_saa7146_dev(v4l2_dev);
+	struct {
+		void *addr;
+		dma_addr_t dma;
+	} dev_map[] = {
+		{ dev->d_i2c.cpu_addr, dev->d_i2c.dma_handle },
+		{ dev->d_rps1.cpu_addr, dev->d_rps1.dma_handle },
+		{ dev->d_rps0.cpu_addr, dev->d_rps0.dma_handle },
+		{ NULL, 0 }
+	}, *p;
+
+	DEB_EE("dev:%p\n", dev);
+
+	dev->ext->detach(dev);
+
+	/* shut down all video dma transfers */
+	saa7146_write(dev, MC1, 0x00ff0000);
+
+	/* disable all irqs, release irq-routine */
+	saa7146_write(dev, IER, 0);
+
+	free_irq(pdev->irq, dev);
+
+	for (p = dev_map; p->addr; p++)
+		pci_free_consistent(pdev, SAA7146_RPS_MEM, p->addr, p->dma);
+
+	iounmap(dev->mem);
+	pci_release_region(pdev, 0);
+	pci_disable_device(pdev);
+	kfree(dev);
+
+	saa7146_num--;
+}
+
+/*********************************************************************************/
+/* extension handling functions                                                  */
+
+int saa7146_register_extension(struct saa7146_extension* ext)
+{
+	DEB_EE("ext:%p\n", ext);
+
+	ext->driver.name = ext->name;
+	ext->driver.id_table = ext->pci_tbl;
+	ext->driver.probe = saa7146_init_one;
+	ext->driver.remove = saa7146_remove_one;
+
+	pr_info("register extension '%s'\n", ext->name);
+	return pci_register_driver(&ext->driver);
+}
+
+int saa7146_unregister_extension(struct saa7146_extension* ext)
+{
+	DEB_EE("ext:%p\n", ext);
+	pr_info("unregister extension '%s'\n", ext->name);
+	pci_unregister_driver(&ext->driver);
+	return 0;
+}
+
+EXPORT_SYMBOL_GPL(saa7146_register_extension);
+EXPORT_SYMBOL_GPL(saa7146_unregister_extension);
+
+/* misc functions used by extension modules */
+EXPORT_SYMBOL_GPL(saa7146_pgtable_alloc);
+EXPORT_SYMBOL_GPL(saa7146_pgtable_free);
+EXPORT_SYMBOL_GPL(saa7146_pgtable_build_single);
+EXPORT_SYMBOL_GPL(saa7146_vmalloc_build_pgtable);
+EXPORT_SYMBOL_GPL(saa7146_vfree_destroy_pgtable);
+EXPORT_SYMBOL_GPL(saa7146_wait_for_debi_done);
+
+EXPORT_SYMBOL_GPL(saa7146_setgpio);
+
+EXPORT_SYMBOL_GPL(saa7146_i2c_adapter_prepare);
+
+EXPORT_SYMBOL_GPL(saa7146_debug);
+
+MODULE_AUTHOR("Michael Hunold <michael@mihu.de>");
+MODULE_DESCRIPTION("driver for generic saa7146-based hardware");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/common/saa7146/saa7146_fops.c b/drivers/media/common/saa7146/saa7146_fops.c
new file mode 100644
index 000000000..df1e8c975
--- /dev/null
+++ b/drivers/media/common/saa7146/saa7146_fops.c
@@ -0,0 +1,648 @@
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <media/saa7146_vv.h>
+#include <linux/module.h>
+
+/****************************************************************************/
+/* resource management functions, shamelessly stolen from saa7134 driver */
+
+int saa7146_res_get(struct saa7146_fh *fh, unsigned int bit)
+{
+	struct saa7146_dev *dev = fh->dev;
+	struct saa7146_vv *vv = dev->vv_data;
+
+	if (fh->resources & bit) {
+		DEB_D("already allocated! want: 0x%02x, cur:0x%02x\n",
+		      bit, vv->resources);
+		/* have it already allocated */
+		return 1;
+	}
+
+	/* is it free? */
+	if (vv->resources & bit) {
+		DEB_D("locked! vv->resources:0x%02x, we want:0x%02x\n",
+		      vv->resources, bit);
+		/* no, someone else uses it */
+		return 0;
+	}
+	/* it's free, grab it */
+	fh->resources |= bit;
+	vv->resources |= bit;
+	DEB_D("res: get 0x%02x, cur:0x%02x\n", bit, vv->resources);
+	return 1;
+}
+
+void saa7146_res_free(struct saa7146_fh *fh, unsigned int bits)
+{
+	struct saa7146_dev *dev = fh->dev;
+	struct saa7146_vv *vv = dev->vv_data;
+
+	BUG_ON((fh->resources & bits) != bits);
+
+	fh->resources &= ~bits;
+	vv->resources &= ~bits;
+	DEB_D("res: put 0x%02x, cur:0x%02x\n", bits, vv->resources);
+}
+
+
+/********************************************************************************/
+/* common dma functions */
+
+void saa7146_dma_free(struct saa7146_dev *dev,struct videobuf_queue *q,
+						struct saa7146_buf *buf)
+{
+	struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb);
+	DEB_EE("dev:%p, buf:%p\n", dev, buf);
+
+	BUG_ON(in_interrupt());
+
+	videobuf_waiton(q, &buf->vb, 0, 0);
+	videobuf_dma_unmap(q->dev, dma);
+	videobuf_dma_free(dma);
+	buf->vb.state = VIDEOBUF_NEEDS_INIT;
+}
+
+
+/********************************************************************************/
+/* common buffer functions */
+
+int saa7146_buffer_queue(struct saa7146_dev *dev,
+			 struct saa7146_dmaqueue *q,
+			 struct saa7146_buf *buf)
+{
+	assert_spin_locked(&dev->slock);
+	DEB_EE("dev:%p, dmaq:%p, buf:%p\n", dev, q, buf);
+
+	BUG_ON(!q);
+
+	if (NULL == q->curr) {
+		q->curr = buf;
+		DEB_D("immediately activating buffer %p\n", buf);
+		buf->activate(dev,buf,NULL);
+	} else {
+		list_add_tail(&buf->vb.queue,&q->queue);
+		buf->vb.state = VIDEOBUF_QUEUED;
+		DEB_D("adding buffer %p to queue. (active buffer present)\n",
+		      buf);
+	}
+	return 0;
+}
+
+void saa7146_buffer_finish(struct saa7146_dev *dev,
+			   struct saa7146_dmaqueue *q,
+			   int state)
+{
+	assert_spin_locked(&dev->slock);
+	DEB_EE("dev:%p, dmaq:%p, state:%d\n", dev, q, state);
+	DEB_EE("q->curr:%p\n", q->curr);
+
+	BUG_ON(!q->curr);
+
+	/* finish current buffer */
+	if (NULL == q->curr) {
+		DEB_D("aiii. no current buffer\n");
+		return;
+	}
+
+	q->curr->vb.state = state;
+	v4l2_get_timestamp(&q->curr->vb.ts);
+	wake_up(&q->curr->vb.done);
+
+	q->curr = NULL;
+}
+
+void saa7146_buffer_next(struct saa7146_dev *dev,
+			 struct saa7146_dmaqueue *q, int vbi)
+{
+	struct saa7146_buf *buf,*next = NULL;
+
+	BUG_ON(!q);
+
+	DEB_INT("dev:%p, dmaq:%p, vbi:%d\n", dev, q, vbi);
+
+	assert_spin_locked(&dev->slock);
+	if (!list_empty(&q->queue)) {
+		/* activate next one from queue */
+		buf = list_entry(q->queue.next,struct saa7146_buf,vb.queue);
+		list_del(&buf->vb.queue);
+		if (!list_empty(&q->queue))
+			next = list_entry(q->queue.next,struct saa7146_buf, vb.queue);
+		q->curr = buf;
+		DEB_INT("next buffer: buf:%p, prev:%p, next:%p\n",
+			buf, q->queue.prev, q->queue.next);
+		buf->activate(dev,buf,next);
+	} else {
+		DEB_INT("no next buffer. stopping.\n");
+		if( 0 != vbi ) {
+			/* turn off video-dma3 */
+			saa7146_write(dev,MC1, MASK_20);
+		} else {
+			/* nothing to do -- just prevent next video-dma1 transfer
+			   by lowering the protection address */
+
+			// fixme: fix this for vflip != 0
+
+			saa7146_write(dev, PROT_ADDR1, 0);
+			saa7146_write(dev, MC2, (MASK_02|MASK_18));
+
+			/* write the address of the rps-program */
+			saa7146_write(dev, RPS_ADDR0, dev->d_rps0.dma_handle);
+			/* turn on rps */
+			saa7146_write(dev, MC1, (MASK_12 | MASK_28));
+
+/*
+			printk("vdma%d.base_even:     0x%08x\n", 1,saa7146_read(dev,BASE_EVEN1));
+			printk("vdma%d.base_odd:      0x%08x\n", 1,saa7146_read(dev,BASE_ODD1));
+			printk("vdma%d.prot_addr:     0x%08x\n", 1,saa7146_read(dev,PROT_ADDR1));
+			printk("vdma%d.base_page:     0x%08x\n", 1,saa7146_read(dev,BASE_PAGE1));
+			printk("vdma%d.pitch:         0x%08x\n", 1,saa7146_read(dev,PITCH1));
+			printk("vdma%d.num_line_byte: 0x%08x\n", 1,saa7146_read(dev,NUM_LINE_BYTE1));
+*/
+		}
+		del_timer(&q->timeout);
+	}
+}
+
+void saa7146_buffer_timeout(unsigned long data)
+{
+	struct saa7146_dmaqueue *q = (struct saa7146_dmaqueue*)data;
+	struct saa7146_dev *dev = q->dev;
+	unsigned long flags;
+
+	DEB_EE("dev:%p, dmaq:%p\n", dev, q);
+
+	spin_lock_irqsave(&dev->slock,flags);
+	if (q->curr) {
+		DEB_D("timeout on %p\n", q->curr);
+		saa7146_buffer_finish(dev,q,VIDEOBUF_ERROR);
+	}
+
+	/* we don't restart the transfer here like other drivers do. when
+	   a streaming capture is disabled, the timeout function will be
+	   called for the current buffer. if we activate the next buffer now,
+	   we mess up our capture logic. if a timeout occurs on another buffer,
+	   then something is seriously broken before, so no need to buffer the
+	   next capture IMHO... */
+/*
+	saa7146_buffer_next(dev,q);
+*/
+	spin_unlock_irqrestore(&dev->slock,flags);
+}
+
+/********************************************************************************/
+/* file operations */
+
+static int fops_open(struct file *file)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct saa7146_dev *dev = video_drvdata(file);
+	struct saa7146_fh *fh = NULL;
+	int result = 0;
+
+	DEB_EE("file:%p, dev:%s\n", file, video_device_node_name(vdev));
+
+	if (mutex_lock_interruptible(vdev->lock))
+		return -ERESTARTSYS;
+
+	DEB_D("using: %p\n", dev);
+
+	/* check if an extension is registered */
+	if( NULL == dev->ext ) {
+		DEB_S("no extension registered for this device\n");
+		result = -ENODEV;
+		goto out;
+	}
+
+	/* allocate per open data */
+	fh = kzalloc(sizeof(*fh),GFP_KERNEL);
+	if (NULL == fh) {
+		DEB_S("cannot allocate memory for per open data\n");
+		result = -ENOMEM;
+		goto out;
+	}
+
+	v4l2_fh_init(&fh->fh, vdev);
+
+	file->private_data = &fh->fh;
+	fh->dev = dev;
+
+	if (vdev->vfl_type == VFL_TYPE_VBI) {
+		DEB_S("initializing vbi...\n");
+		if (dev->ext_vv_data->capabilities & V4L2_CAP_VBI_CAPTURE)
+			result = saa7146_vbi_uops.open(dev,file);
+		if (dev->ext_vv_data->vbi_fops.open)
+			dev->ext_vv_data->vbi_fops.open(file);
+	} else {
+		DEB_S("initializing video...\n");
+		result = saa7146_video_uops.open(dev,file);
+	}
+
+	if (0 != result) {
+		goto out;
+	}
+
+	if( 0 == try_module_get(dev->ext->module)) {
+		result = -EINVAL;
+		goto out;
+	}
+
+	result = 0;
+	v4l2_fh_add(&fh->fh);
+out:
+	if (fh && result != 0) {
+		kfree(fh);
+		file->private_data = NULL;
+	}
+	mutex_unlock(vdev->lock);
+	return result;
+}
+
+static int fops_release(struct file *file)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct saa7146_fh  *fh  = file->private_data;
+	struct saa7146_dev *dev = fh->dev;
+
+	DEB_EE("file:%p\n", file);
+
+	mutex_lock(vdev->lock);
+
+	if (vdev->vfl_type == VFL_TYPE_VBI) {
+		if (dev->ext_vv_data->capabilities & V4L2_CAP_VBI_CAPTURE)
+			saa7146_vbi_uops.release(dev,file);
+		if (dev->ext_vv_data->vbi_fops.release)
+			dev->ext_vv_data->vbi_fops.release(file);
+	} else {
+		saa7146_video_uops.release(dev,file);
+	}
+
+	v4l2_fh_del(&fh->fh);
+	v4l2_fh_exit(&fh->fh);
+	module_put(dev->ext->module);
+	file->private_data = NULL;
+	kfree(fh);
+
+	mutex_unlock(vdev->lock);
+
+	return 0;
+}
+
+static int fops_mmap(struct file *file, struct vm_area_struct * vma)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct saa7146_fh *fh = file->private_data;
+	struct videobuf_queue *q;
+	int res;
+
+	switch (vdev->vfl_type) {
+	case VFL_TYPE_GRABBER: {
+		DEB_EE("V4L2_BUF_TYPE_VIDEO_CAPTURE: file:%p, vma:%p\n",
+		       file, vma);
+		q = &fh->video_q;
+		break;
+		}
+	case VFL_TYPE_VBI: {
+		DEB_EE("V4L2_BUF_TYPE_VBI_CAPTURE: file:%p, vma:%p\n",
+		       file, vma);
+		if (fh->dev->ext_vv_data->capabilities & V4L2_CAP_SLICED_VBI_OUTPUT)
+			return -ENODEV;
+		q = &fh->vbi_q;
+		break;
+		}
+	default:
+		BUG();
+	}
+
+	if (mutex_lock_interruptible(vdev->lock))
+		return -ERESTARTSYS;
+	res = videobuf_mmap_mapper(q, vma);
+	mutex_unlock(vdev->lock);
+	return res;
+}
+
+static unsigned int __fops_poll(struct file *file, struct poll_table_struct *wait)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct saa7146_fh *fh = file->private_data;
+	struct videobuf_buffer *buf = NULL;
+	struct videobuf_queue *q;
+	unsigned int res = v4l2_ctrl_poll(file, wait);
+
+	DEB_EE("file:%p, poll:%p\n", file, wait);
+
+	if (vdev->vfl_type == VFL_TYPE_VBI) {
+		if (fh->dev->ext_vv_data->capabilities & V4L2_CAP_SLICED_VBI_OUTPUT)
+			return res | POLLOUT | POLLWRNORM;
+		if( 0 == fh->vbi_q.streaming )
+			return res | videobuf_poll_stream(file, &fh->vbi_q, wait);
+		q = &fh->vbi_q;
+	} else {
+		DEB_D("using video queue\n");
+		q = &fh->video_q;
+	}
+
+	if (!list_empty(&q->stream))
+		buf = list_entry(q->stream.next, struct videobuf_buffer, stream);
+
+	if (!buf) {
+		DEB_D("buf == NULL!\n");
+		return res | POLLERR;
+	}
+
+	poll_wait(file, &buf->done, wait);
+	if (buf->state == VIDEOBUF_DONE || buf->state == VIDEOBUF_ERROR) {
+		DEB_D("poll succeeded!\n");
+		return res | POLLIN | POLLRDNORM;
+	}
+
+	DEB_D("nothing to poll for, buf->state:%d\n", buf->state);
+	return res;
+}
+
+static unsigned int fops_poll(struct file *file, struct poll_table_struct *wait)
+{
+	struct video_device *vdev = video_devdata(file);
+	unsigned int res;
+
+	mutex_lock(vdev->lock);
+	res = __fops_poll(file, wait);
+	mutex_unlock(vdev->lock);
+	return res;
+}
+
+static ssize_t fops_read(struct file *file, char __user *data, size_t count, loff_t *ppos)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct saa7146_fh *fh = file->private_data;
+	int ret;
+
+	switch (vdev->vfl_type) {
+	case VFL_TYPE_GRABBER:
+/*
+		DEB_EE("V4L2_BUF_TYPE_VIDEO_CAPTURE: file:%p, data:%p, count:%lun",
+		       file, data, (unsigned long)count);
+*/
+		return saa7146_video_uops.read(file,data,count,ppos);
+	case VFL_TYPE_VBI:
+/*
+		DEB_EE("V4L2_BUF_TYPE_VBI_CAPTURE: file:%p, data:%p, count:%lu\n",
+		       file, data, (unsigned long)count);
+*/
+		if (fh->dev->ext_vv_data->capabilities & V4L2_CAP_VBI_CAPTURE) {
+			if (mutex_lock_interruptible(vdev->lock))
+				return -ERESTARTSYS;
+			ret = saa7146_vbi_uops.read(file, data, count, ppos);
+			mutex_unlock(vdev->lock);
+			return ret;
+		}
+		return -EINVAL;
+	default:
+		BUG();
+	}
+}
+
+static ssize_t fops_write(struct file *file, const char __user *data, size_t count, loff_t *ppos)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct saa7146_fh *fh = file->private_data;
+	int ret;
+
+	switch (vdev->vfl_type) {
+	case VFL_TYPE_GRABBER:
+		return -EINVAL;
+	case VFL_TYPE_VBI:
+		if (fh->dev->ext_vv_data->vbi_fops.write) {
+			if (mutex_lock_interruptible(vdev->lock))
+				return -ERESTARTSYS;
+			ret = fh->dev->ext_vv_data->vbi_fops.write(file, data, count, ppos);
+			mutex_unlock(vdev->lock);
+			return ret;
+		}
+		return -EINVAL;
+	default:
+		BUG();
+	}
+}
+
+static const struct v4l2_file_operations video_fops =
+{
+	.owner		= THIS_MODULE,
+	.open		= fops_open,
+	.release	= fops_release,
+	.read		= fops_read,
+	.write		= fops_write,
+	.poll		= fops_poll,
+	.mmap		= fops_mmap,
+	.unlocked_ioctl	= video_ioctl2,
+};
+
+static void vv_callback(struct saa7146_dev *dev, unsigned long status)
+{
+	u32 isr = status;
+
+	DEB_INT("dev:%p, isr:0x%08x\n", dev, (u32)status);
+
+	if (0 != (isr & (MASK_27))) {
+		DEB_INT("irq: RPS0 (0x%08x)\n", isr);
+		saa7146_video_uops.irq_done(dev,isr);
+	}
+
+	if (0 != (isr & (MASK_28))) {
+		u32 mc2 = saa7146_read(dev, MC2);
+		if( 0 != (mc2 & MASK_15)) {
+			DEB_INT("irq: RPS1 vbi workaround (0x%08x)\n", isr);
+			wake_up(&dev->vv_data->vbi_wq);
+			saa7146_write(dev,MC2, MASK_31);
+			return;
+		}
+		DEB_INT("irq: RPS1 (0x%08x)\n", isr);
+		saa7146_vbi_uops.irq_done(dev,isr);
+	}
+}
+
+static const struct v4l2_ctrl_ops saa7146_ctrl_ops = {
+	.s_ctrl = saa7146_s_ctrl,
+};
+
+int saa7146_vv_init(struct saa7146_dev* dev, struct saa7146_ext_vv *ext_vv)
+{
+	struct v4l2_ctrl_handler *hdl = &dev->ctrl_handler;
+	struct v4l2_pix_format *fmt;
+	struct v4l2_vbi_format *vbi;
+	struct saa7146_vv *vv;
+	int err;
+
+	err = v4l2_device_register(&dev->pci->dev, &dev->v4l2_dev);
+	if (err)
+		return err;
+
+	v4l2_ctrl_handler_init(hdl, 6);
+	v4l2_ctrl_new_std(hdl, &saa7146_ctrl_ops,
+		V4L2_CID_BRIGHTNESS, 0, 255, 1, 128);
+	v4l2_ctrl_new_std(hdl, &saa7146_ctrl_ops,
+		V4L2_CID_CONTRAST, 0, 127, 1, 64);
+	v4l2_ctrl_new_std(hdl, &saa7146_ctrl_ops,
+		V4L2_CID_SATURATION, 0, 127, 1, 64);
+	v4l2_ctrl_new_std(hdl, &saa7146_ctrl_ops,
+		V4L2_CID_VFLIP, 0, 1, 1, 0);
+	v4l2_ctrl_new_std(hdl, &saa7146_ctrl_ops,
+		V4L2_CID_HFLIP, 0, 1, 1, 0);
+	if (hdl->error) {
+		err = hdl->error;
+		v4l2_ctrl_handler_free(hdl);
+		return err;
+	}
+	dev->v4l2_dev.ctrl_handler = hdl;
+
+	vv = kzalloc(sizeof(struct saa7146_vv), GFP_KERNEL);
+	if (vv == NULL) {
+		ERR("out of memory. aborting.\n");
+		v4l2_ctrl_handler_free(hdl);
+		return -ENOMEM;
+	}
+	ext_vv->vid_ops = saa7146_video_ioctl_ops;
+	ext_vv->vbi_ops = saa7146_vbi_ioctl_ops;
+	ext_vv->core_ops = &saa7146_video_ioctl_ops;
+
+	DEB_EE("dev:%p\n", dev);
+
+	/* set default values for video parts of the saa7146 */
+	saa7146_write(dev, BCS_CTRL, 0x80400040);
+
+	/* enable video-port pins */
+	saa7146_write(dev, MC1, (MASK_10 | MASK_26));
+
+	/* save per-device extension data (one extension can
+	   handle different devices that might need different
+	   configuration data) */
+	dev->ext_vv_data = ext_vv;
+
+	vv->d_clipping.cpu_addr =
+		pci_zalloc_consistent(dev->pci, SAA7146_CLIPPING_MEM,
+				      &vv->d_clipping.dma_handle);
+	if( NULL == vv->d_clipping.cpu_addr ) {
+		ERR("out of memory. aborting.\n");
+		kfree(vv);
+		v4l2_ctrl_handler_free(hdl);
+		return -1;
+	}
+
+	saa7146_video_uops.init(dev,vv);
+	if (dev->ext_vv_data->capabilities & V4L2_CAP_VBI_CAPTURE)
+		saa7146_vbi_uops.init(dev,vv);
+
+	vv->ov_fb.fmt.width = vv->standard->h_max_out;
+	vv->ov_fb.fmt.height = vv->standard->v_max_out;
+	vv->ov_fb.fmt.pixelformat = V4L2_PIX_FMT_RGB565;
+	vv->ov_fb.fmt.bytesperline = 2 * vv->ov_fb.fmt.width;
+	vv->ov_fb.fmt.sizeimage = vv->ov_fb.fmt.bytesperline * vv->ov_fb.fmt.height;
+	vv->ov_fb.fmt.colorspace = V4L2_COLORSPACE_SRGB;
+
+	fmt = &vv->video_fmt;
+	fmt->width = 384;
+	fmt->height = 288;
+	fmt->pixelformat = V4L2_PIX_FMT_BGR24;
+	fmt->field = V4L2_FIELD_ANY;
+	fmt->colorspace = V4L2_COLORSPACE_SMPTE170M;
+	fmt->bytesperline = 3 * fmt->width;
+	fmt->sizeimage = fmt->bytesperline * fmt->height;
+
+	vbi = &vv->vbi_fmt;
+	vbi->sampling_rate	= 27000000;
+	vbi->offset		= 248; /* todo */
+	vbi->samples_per_line	= 720 * 2;
+	vbi->sample_format	= V4L2_PIX_FMT_GREY;
+
+	/* fixme: this only works for PAL */
+	vbi->start[0] = 5;
+	vbi->count[0] = 16;
+	vbi->start[1] = 312;
+	vbi->count[1] = 16;
+
+	init_timer(&vv->vbi_read_timeout);
+
+	vv->ov_fb.capability = V4L2_FBUF_CAP_LIST_CLIPPING;
+	vv->ov_fb.flags = V4L2_FBUF_FLAG_PRIMARY;
+	dev->vv_data = vv;
+	dev->vv_callback = &vv_callback;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(saa7146_vv_init);
+
+int saa7146_vv_release(struct saa7146_dev* dev)
+{
+	struct saa7146_vv *vv = dev->vv_data;
+
+	DEB_EE("dev:%p\n", dev);
+
+	v4l2_device_unregister(&dev->v4l2_dev);
+	pci_free_consistent(dev->pci, SAA7146_CLIPPING_MEM, vv->d_clipping.cpu_addr, vv->d_clipping.dma_handle);
+	v4l2_ctrl_handler_free(&dev->ctrl_handler);
+	kfree(vv);
+	dev->vv_data = NULL;
+	dev->vv_callback = NULL;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(saa7146_vv_release);
+
+int saa7146_register_device(struct video_device *vfd, struct saa7146_dev *dev,
+			    char *name, int type)
+{
+	int err;
+	int i;
+
+	DEB_EE("dev:%p, name:'%s', type:%d\n", dev, name, type);
+
+	vfd->fops = &video_fops;
+	if (type == VFL_TYPE_GRABBER)
+		vfd->ioctl_ops = &dev->ext_vv_data->vid_ops;
+	else
+		vfd->ioctl_ops = &dev->ext_vv_data->vbi_ops;
+	vfd->release = video_device_release_empty;
+	vfd->lock = &dev->v4l2_lock;
+	vfd->v4l2_dev = &dev->v4l2_dev;
+	vfd->tvnorms = 0;
+	for (i = 0; i < dev->ext_vv_data->num_stds; i++)
+		vfd->tvnorms |= dev->ext_vv_data->stds[i].id;
+	strlcpy(vfd->name, name, sizeof(vfd->name));
+	video_set_drvdata(vfd, dev);
+
+	err = video_register_device(vfd, type, -1);
+	if (err < 0) {
+		ERR("cannot register v4l2 device. skipping.\n");
+		return err;
+	}
+
+	pr_info("%s: registered device %s [v4l2]\n",
+		dev->name, video_device_node_name(vfd));
+	return 0;
+}
+EXPORT_SYMBOL_GPL(saa7146_register_device);
+
+int saa7146_unregister_device(struct video_device *vfd, struct saa7146_dev *dev)
+{
+	DEB_EE("dev:%p\n", dev);
+
+	video_unregister_device(vfd);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(saa7146_unregister_device);
+
+static int __init saa7146_vv_init_module(void)
+{
+	return 0;
+}
+
+
+static void __exit saa7146_vv_cleanup_module(void)
+{
+}
+
+module_init(saa7146_vv_init_module);
+module_exit(saa7146_vv_cleanup_module);
+
+MODULE_AUTHOR("Michael Hunold <michael@mihu.de>");
+MODULE_DESCRIPTION("video4linux driver for saa7146-based hardware");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/common/saa7146/saa7146_hlp.c b/drivers/media/common/saa7146/saa7146_hlp.c
new file mode 100644
index 000000000..be746d1ae
--- /dev/null
+++ b/drivers/media/common/saa7146/saa7146_hlp.c
@@ -0,0 +1,1048 @@
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/export.h>
+#include <media/saa7146_vv.h>
+
+static void calculate_output_format_register(struct saa7146_dev* saa, u32 palette, u32* clip_format)
+{
+	/* clear out the necessary bits */
+	*clip_format &= 0x0000ffff;
+	/* set these bits new */
+	*clip_format |=  (( ((palette&0xf00)>>8) << 30) | ((palette&0x00f) << 24) | (((palette&0x0f0)>>4) << 16));
+}
+
+static void calculate_hps_source_and_sync(struct saa7146_dev *dev, int source, int sync, u32* hps_ctrl)
+{
+	*hps_ctrl &= ~(MASK_30 | MASK_31 | MASK_28);
+	*hps_ctrl |= (source << 30) | (sync << 28);
+}
+
+static void calculate_hxo_and_hyo(struct saa7146_vv *vv, u32* hps_h_scale, u32* hps_ctrl)
+{
+	int hyo = 0, hxo = 0;
+
+	hyo = vv->standard->v_offset;
+	hxo = vv->standard->h_offset;
+
+	*hps_h_scale	&= ~(MASK_B0 | 0xf00);
+	*hps_h_scale	|= (hxo <<  0);
+
+	*hps_ctrl	&= ~(MASK_W0 | MASK_B2);
+	*hps_ctrl	|= (hyo << 12);
+}
+
+/* helper functions for the calculation of the horizontal- and vertical
+   scaling registers, clip-format-register etc ...
+   these functions take pointers to the (most-likely read-out
+   original-values) and manipulate them according to the requested
+   changes.
+*/
+
+/* hps_coeff used for CXY and CXUV; scale 1/1 -> scale 1/64 */
+static struct {
+	u16 hps_coeff;
+	u16 weight_sum;
+} hps_h_coeff_tab [] = {
+	{0x00,   2}, {0x02,   4}, {0x00,   4}, {0x06,   8}, {0x02,   8},
+	{0x08,   8}, {0x00,   8}, {0x1E,  16}, {0x0E,   8}, {0x26,   8},
+	{0x06,   8}, {0x42,   8}, {0x02,   8}, {0x80,   8}, {0x00,   8},
+	{0xFE,  16}, {0xFE,   8}, {0x7E,   8}, {0x7E,   8}, {0x3E,   8},
+	{0x3E,   8}, {0x1E,   8}, {0x1E,   8}, {0x0E,   8}, {0x0E,   8},
+	{0x06,   8}, {0x06,   8}, {0x02,   8}, {0x02,   8}, {0x00,   8},
+	{0x00,   8}, {0xFE,  16}, {0xFE,   8}, {0xFE,   8}, {0xFE,   8},
+	{0xFE,   8}, {0xFE,   8}, {0xFE,   8}, {0xFE,   8}, {0xFE,   8},
+	{0xFE,   8}, {0xFE,   8}, {0xFE,   8}, {0xFE,   8}, {0xFE,   8},
+	{0xFE,   8}, {0xFE,   8}, {0xFE,   8}, {0xFE,   8}, {0x7E,   8},
+	{0x7E,   8}, {0x3E,   8}, {0x3E,   8}, {0x1E,   8}, {0x1E,   8},
+	{0x0E,   8}, {0x0E,   8}, {0x06,   8}, {0x06,   8}, {0x02,   8},
+	{0x02,   8}, {0x00,   8}, {0x00,   8}, {0xFE,  16}
+};
+
+/* table of attenuation values for horizontal scaling */
+static u8 h_attenuation[] = { 1, 2, 4, 8, 2, 4, 8, 16, 0};
+
+/* calculate horizontal scale registers */
+static int calculate_h_scale_registers(struct saa7146_dev *dev,
+	int in_x, int out_x, int flip_lr,
+	u32* hps_ctrl, u32* hps_v_gain, u32* hps_h_prescale, u32* hps_h_scale)
+{
+	/* horizontal prescaler */
+	u32 dcgx = 0, xpsc = 0, xacm = 0, cxy = 0, cxuv = 0;
+	/* horizontal scaler */
+	u32 xim = 0, xp = 0, xsci =0;
+	/* vertical scale & gain */
+	u32 pfuv = 0;
+
+	/* helper variables */
+	u32 h_atten = 0, i = 0;
+
+	if ( 0 == out_x ) {
+		return -EINVAL;
+	}
+
+	/* mask out vanity-bit */
+	*hps_ctrl &= ~MASK_29;
+
+	/* calculate prescale-(xspc)-value:	[n   .. 1/2) : 1
+						[1/2 .. 1/3) : 2
+						[1/3 .. 1/4) : 3
+						...		*/
+	if (in_x > out_x) {
+		xpsc = in_x / out_x;
+	}
+	else {
+		/* zooming */
+		xpsc = 1;
+	}
+
+	/* if flip_lr-bit is set, number of pixels after
+	   horizontal prescaling must be < 384 */
+	if ( 0 != flip_lr ) {
+
+		/* set vanity bit */
+		*hps_ctrl |= MASK_29;
+
+		while (in_x / xpsc >= 384 )
+			xpsc++;
+	}
+	/* if zooming is wanted, number of pixels after
+	   horizontal prescaling must be < 768 */
+	else {
+		while ( in_x / xpsc >= 768 )
+			xpsc++;
+	}
+
+	/* maximum prescale is 64 (p.69) */
+	if ( xpsc > 64 )
+		xpsc = 64;
+
+	/* keep xacm clear*/
+	xacm = 0;
+
+	/* set horizontal filter parameters (CXY = CXUV) */
+	cxy = hps_h_coeff_tab[( (xpsc - 1) < 63 ? (xpsc - 1) : 63 )].hps_coeff;
+	cxuv = cxy;
+
+	/* calculate and set horizontal fine scale (xsci) */
+
+	/* bypass the horizontal scaler ? */
+	if ( (in_x == out_x) && ( 1 == xpsc ) )
+		xsci = 0x400;
+	else
+		xsci = ( (1024 * in_x) / (out_x * xpsc) ) + xpsc;
+
+	/* set start phase for horizontal fine scale (xp) to 0 */
+	xp = 0;
+
+	/* set xim, if we bypass the horizontal scaler */
+	if ( 0x400 == xsci )
+		xim = 1;
+	else
+		xim = 0;
+
+	/* if the prescaler is bypassed, enable horizontal
+	   accumulation mode (xacm) and clear dcgx */
+	if( 1 == xpsc ) {
+		xacm = 1;
+		dcgx = 0;
+	} else {
+		xacm = 0;
+		/* get best match in the table of attenuations
+		   for horizontal scaling */
+		h_atten = hps_h_coeff_tab[( (xpsc - 1) < 63 ? (xpsc - 1) : 63 )].weight_sum;
+
+		for (i = 0; h_attenuation[i] != 0; i++) {
+			if (h_attenuation[i] >= h_atten)
+				break;
+		}
+
+		dcgx = i;
+	}
+
+	/* the horizontal scaling increment controls the UV filter
+	   to reduce the bandwidth to improve the display quality,
+	   so set it ... */
+	if ( xsci == 0x400)
+		pfuv = 0x00;
+	else if ( xsci < 0x600)
+		pfuv = 0x01;
+	else if ( xsci < 0x680)
+		pfuv = 0x11;
+	else if ( xsci < 0x700)
+		pfuv = 0x22;
+	else
+		pfuv = 0x33;
+
+
+	*hps_v_gain  &= MASK_W0|MASK_B2;
+	*hps_v_gain  |= (pfuv << 24);
+
+	*hps_h_scale	&= ~(MASK_W1 | 0xf000);
+	*hps_h_scale	|= (xim << 31) | (xp << 24) | (xsci << 12);
+
+	*hps_h_prescale	|= (dcgx << 27) | ((xpsc-1) << 18) | (xacm << 17) | (cxy << 8) | (cxuv << 0);
+
+	return 0;
+}
+
+static struct {
+	u16 hps_coeff;
+	u16 weight_sum;
+} hps_v_coeff_tab [] = {
+ {0x0100,   2},  {0x0102,   4},  {0x0300,   4},  {0x0106,   8},  {0x0502,   8},
+ {0x0708,   8},  {0x0F00,   8},  {0x011E,  16},  {0x110E,  16},  {0x1926,  16},
+ {0x3906,  16},  {0x3D42,  16},  {0x7D02,  16},  {0x7F80,  16},  {0xFF00,  16},
+ {0x01FE,  32},  {0x01FE,  32},  {0x817E,  32},  {0x817E,  32},  {0xC13E,  32},
+ {0xC13E,  32},  {0xE11E,  32},  {0xE11E,  32},  {0xF10E,  32},  {0xF10E,  32},
+ {0xF906,  32},  {0xF906,  32},  {0xFD02,  32},  {0xFD02,  32},  {0xFF00,  32},
+ {0xFF00,  32},  {0x01FE,  64},  {0x01FE,  64},  {0x01FE,  64},  {0x01FE,  64},
+ {0x01FE,  64},  {0x01FE,  64},  {0x01FE,  64},  {0x01FE,  64},  {0x01FE,  64},
+ {0x01FE,  64},  {0x01FE,  64},  {0x01FE,  64},  {0x01FE,  64},  {0x01FE,  64},
+ {0x01FE,  64},  {0x01FE,  64},  {0x01FE,  64},  {0x01FE,  64},  {0x817E,  64},
+ {0x817E,  64},  {0xC13E,  64},  {0xC13E,  64},  {0xE11E,  64},  {0xE11E,  64},
+ {0xF10E,  64},  {0xF10E,  64},  {0xF906,  64},  {0xF906,  64},  {0xFD02,  64},
+ {0xFD02,  64},  {0xFF00,  64},  {0xFF00,  64},  {0x01FE, 128}
+};
+
+/* table of attenuation values for vertical scaling */
+static u16 v_attenuation[] = { 2, 4, 8, 16, 32, 64, 128, 256, 0};
+
+/* calculate vertical scale registers */
+static int calculate_v_scale_registers(struct saa7146_dev *dev, enum v4l2_field field,
+	int in_y, int out_y, u32* hps_v_scale, u32* hps_v_gain)
+{
+	int lpi = 0;
+
+	/* vertical scaling */
+	u32 yacm = 0, ysci = 0, yacl = 0, ypo = 0, ype = 0;
+	/* vertical scale & gain */
+	u32 dcgy = 0, cya_cyb = 0;
+
+	/* helper variables */
+	u32 v_atten = 0, i = 0;
+
+	/* error, if vertical zooming */
+	if ( in_y < out_y ) {
+		return -EINVAL;
+	}
+
+	/* linear phase interpolation may be used
+	   if scaling is between 1 and 1/2 (both fields used)
+	   or scaling is between 1/2 and 1/4 (if only one field is used) */
+
+	if (V4L2_FIELD_HAS_BOTH(field)) {
+		if( 2*out_y >= in_y) {
+			lpi = 1;
+		}
+	} else if (field == V4L2_FIELD_TOP
+		|| field == V4L2_FIELD_ALTERNATE
+		|| field == V4L2_FIELD_BOTTOM) {
+		if( 4*out_y >= in_y ) {
+			lpi = 1;
+		}
+		out_y *= 2;
+	}
+	if( 0 != lpi ) {
+
+		yacm = 0;
+		yacl = 0;
+		cya_cyb = 0x00ff;
+
+		/* calculate scaling increment */
+		if ( in_y > out_y )
+			ysci = ((1024 * in_y) / (out_y + 1)) - 1024;
+		else
+			ysci = 0;
+
+		dcgy = 0;
+
+		/* calculate ype and ypo */
+		ype = ysci / 16;
+		ypo = ype + (ysci / 64);
+
+	} else {
+		yacm = 1;
+
+		/* calculate scaling increment */
+		ysci = (((10 * 1024 * (in_y - out_y - 1)) / in_y) + 9) / 10;
+
+		/* calculate ype and ypo */
+		ypo = ype = ((ysci + 15) / 16);
+
+		/* the sequence length interval (yacl) has to be set according
+		   to the prescale value, e.g.	[n   .. 1/2) : 0
+						[1/2 .. 1/3) : 1
+						[1/3 .. 1/4) : 2
+						... */
+		if ( ysci < 512) {
+			yacl = 0;
+		} else {
+			yacl = ( ysci / (1024 - ysci) );
+		}
+
+		/* get filter coefficients for cya, cyb from table hps_v_coeff_tab */
+		cya_cyb = hps_v_coeff_tab[ (yacl < 63 ? yacl : 63 ) ].hps_coeff;
+
+		/* get best match in the table of attenuations for vertical scaling */
+		v_atten = hps_v_coeff_tab[ (yacl < 63 ? yacl : 63 ) ].weight_sum;
+
+		for (i = 0; v_attenuation[i] != 0; i++) {
+			if (v_attenuation[i] >= v_atten)
+				break;
+		}
+
+		dcgy = i;
+	}
+
+	/* ypo and ype swapped in spec ? */
+	*hps_v_scale	|= (yacm << 31) | (ysci << 21) | (yacl << 15) | (ypo << 8 ) | (ype << 1);
+
+	*hps_v_gain	&= ~(MASK_W0|MASK_B2);
+	*hps_v_gain	|= (dcgy << 16) | (cya_cyb << 0);
+
+	return 0;
+}
+
+/* simple bubble-sort algorithm with duplicate elimination */
+static int sort_and_eliminate(u32* values, int* count)
+{
+	int low = 0, high = 0, top = 0, temp = 0;
+	int cur = 0, next = 0;
+
+	/* sanity checks */
+	if( (0 > *count) || (NULL == values) ) {
+		return -EINVAL;
+	}
+
+	/* bubble sort the first @count items of the array @values */
+	for( top = *count; top > 0; top--) {
+		for( low = 0, high = 1; high < top; low++, high++) {
+			if( values[low] > values[high] ) {
+				temp = values[low];
+				values[low] = values[high];
+				values[high] = temp;
+			}
+		}
+	}
+
+	/* remove duplicate items */
+	for( cur = 0, next = 1; next < *count; next++) {
+		if( values[cur] != values[next])
+			values[++cur] = values[next];
+	}
+
+	*count = cur + 1;
+
+	return 0;
+}
+
+static void calculate_clipping_registers_rect(struct saa7146_dev *dev, struct saa7146_fh *fh,
+	struct saa7146_video_dma *vdma2, u32* clip_format, u32* arbtr_ctrl, enum v4l2_field field)
+{
+	struct saa7146_vv *vv = dev->vv_data;
+	__le32 *clipping = vv->d_clipping.cpu_addr;
+
+	int width = vv->ov.win.w.width;
+	int height =  vv->ov.win.w.height;
+	int clipcount = vv->ov.nclips;
+
+	u32 line_list[32];
+	u32 pixel_list[32];
+	int numdwords = 0;
+
+	int i = 0, j = 0;
+	int cnt_line = 0, cnt_pixel = 0;
+
+	int x[32], y[32], w[32], h[32];
+
+	/* clear out memory */
+	memset(&line_list[0],  0x00, sizeof(u32)*32);
+	memset(&pixel_list[0], 0x00, sizeof(u32)*32);
+	memset(clipping,  0x00, SAA7146_CLIPPING_MEM);
+
+	/* fill the line and pixel-lists */
+	for(i = 0; i < clipcount; i++) {
+		int l = 0, r = 0, t = 0, b = 0;
+
+		x[i] = vv->ov.clips[i].c.left;
+		y[i] = vv->ov.clips[i].c.top;
+		w[i] = vv->ov.clips[i].c.width;
+		h[i] = vv->ov.clips[i].c.height;
+
+		if( w[i] < 0) {
+			x[i] += w[i]; w[i] = -w[i];
+		}
+		if( h[i] < 0) {
+			y[i] += h[i]; h[i] = -h[i];
+		}
+		if( x[i] < 0) {
+			w[i] += x[i]; x[i] = 0;
+		}
+		if( y[i] < 0) {
+			h[i] += y[i]; y[i] = 0;
+		}
+		if( 0 != vv->vflip ) {
+			y[i] = height - y[i] - h[i];
+		}
+
+		l = x[i];
+		r = x[i]+w[i];
+		t = y[i];
+		b = y[i]+h[i];
+
+		/* insert left/right coordinates */
+		pixel_list[ 2*i   ] = min_t(int, l, width);
+		pixel_list[(2*i)+1] = min_t(int, r, width);
+		/* insert top/bottom coordinates */
+		line_list[ 2*i   ] = min_t(int, t, height);
+		line_list[(2*i)+1] = min_t(int, b, height);
+	}
+
+	/* sort and eliminate lists */
+	cnt_line = cnt_pixel = 2*clipcount;
+	sort_and_eliminate( &pixel_list[0], &cnt_pixel );
+	sort_and_eliminate( &line_list[0], &cnt_line );
+
+	/* calculate the number of used u32s */
+	numdwords = max_t(int, (cnt_line+1), (cnt_pixel+1))*2;
+	numdwords = max_t(int, 4, numdwords);
+	numdwords = min_t(int, 64, numdwords);
+
+	/* fill up cliptable */
+	for(i = 0; i < cnt_pixel; i++) {
+		clipping[2*i] |= cpu_to_le32(pixel_list[i] << 16);
+	}
+	for(i = 0; i < cnt_line; i++) {
+		clipping[(2*i)+1] |= cpu_to_le32(line_list[i] << 16);
+	}
+
+	/* fill up cliptable with the display infos */
+	for(j = 0; j < clipcount; j++) {
+
+		for(i = 0; i < cnt_pixel; i++) {
+
+			if( x[j] < 0)
+				x[j] = 0;
+
+			if( pixel_list[i] < (x[j] + w[j])) {
+
+				if ( pixel_list[i] >= x[j] ) {
+					clipping[2*i] |= cpu_to_le32(1 << j);
+				}
+			}
+		}
+		for(i = 0; i < cnt_line; i++) {
+
+			if( y[j] < 0)
+				y[j] = 0;
+
+			if( line_list[i] < (y[j] + h[j]) ) {
+
+				if( line_list[i] >= y[j] ) {
+					clipping[(2*i)+1] |= cpu_to_le32(1 << j);
+				}
+			}
+		}
+	}
+
+	/* adjust arbitration control register */
+	*arbtr_ctrl &= 0xffff00ff;
+	*arbtr_ctrl |= 0x00001c00;
+
+	vdma2->base_even	= vv->d_clipping.dma_handle;
+	vdma2->base_odd		= vv->d_clipping.dma_handle;
+	vdma2->prot_addr	= vv->d_clipping.dma_handle+((sizeof(u32))*(numdwords));
+	vdma2->base_page	= 0x04;
+	vdma2->pitch		= 0x00;
+	vdma2->num_line_byte	= (0 << 16 | (sizeof(u32))*(numdwords-1) );
+
+	/* set clipping-mode. this depends on the field(s) used */
+	*clip_format &= 0xfffffff7;
+	if (V4L2_FIELD_HAS_BOTH(field)) {
+		*clip_format |= 0x00000008;
+	} else {
+		*clip_format |= 0x00000000;
+	}
+}
+
+/* disable clipping */
+static void saa7146_disable_clipping(struct saa7146_dev *dev)
+{
+	u32 clip_format	= saa7146_read(dev, CLIP_FORMAT_CTRL);
+
+	/* mask out relevant bits (=lower word)*/
+	clip_format &= MASK_W1;
+
+	/* upload clipping-registers*/
+	saa7146_write(dev, CLIP_FORMAT_CTRL,clip_format);
+	saa7146_write(dev, MC2, (MASK_05 | MASK_21));
+
+	/* disable video dma2 */
+	saa7146_write(dev, MC1, MASK_21);
+}
+
+static void saa7146_set_clipping_rect(struct saa7146_fh *fh)
+{
+	struct saa7146_dev *dev = fh->dev;
+	struct saa7146_vv *vv = dev->vv_data;
+	enum v4l2_field field = vv->ov.win.field;
+	struct	saa7146_video_dma vdma2;
+	u32 clip_format;
+	u32 arbtr_ctrl;
+
+	/* check clipcount, disable clipping if clipcount == 0*/
+	if (vv->ov.nclips == 0) {
+		saa7146_disable_clipping(dev);
+		return;
+	}
+
+	clip_format = saa7146_read(dev, CLIP_FORMAT_CTRL);
+	arbtr_ctrl = saa7146_read(dev, PCI_BT_V1);
+
+	calculate_clipping_registers_rect(dev, fh, &vdma2, &clip_format, &arbtr_ctrl, field);
+
+	/* set clipping format */
+	clip_format &= 0xffff0008;
+	clip_format |= (SAA7146_CLIPPING_RECT << 4);
+
+	/* prepare video dma2 */
+	saa7146_write(dev, BASE_EVEN2,		vdma2.base_even);
+	saa7146_write(dev, BASE_ODD2,		vdma2.base_odd);
+	saa7146_write(dev, PROT_ADDR2,		vdma2.prot_addr);
+	saa7146_write(dev, BASE_PAGE2,		vdma2.base_page);
+	saa7146_write(dev, PITCH2,		vdma2.pitch);
+	saa7146_write(dev, NUM_LINE_BYTE2,	vdma2.num_line_byte);
+
+	/* prepare the rest */
+	saa7146_write(dev, CLIP_FORMAT_CTRL,clip_format);
+	saa7146_write(dev, PCI_BT_V1, arbtr_ctrl);
+
+	/* upload clip_control-register, clipping-registers, enable video dma2 */
+	saa7146_write(dev, MC2, (MASK_05 | MASK_21 | MASK_03 | MASK_19));
+	saa7146_write(dev, MC1, (MASK_05 | MASK_21));
+}
+
+static void saa7146_set_window(struct saa7146_dev *dev, int width, int height, enum v4l2_field field)
+{
+	struct saa7146_vv *vv = dev->vv_data;
+
+	int source = vv->current_hps_source;
+	int sync = vv->current_hps_sync;
+
+	u32 hps_v_scale = 0, hps_v_gain  = 0, hps_ctrl = 0, hps_h_prescale = 0, hps_h_scale = 0;
+
+	/* set vertical scale */
+	hps_v_scale = 0; /* all bits get set by the function-call */
+	hps_v_gain  = 0; /* fixme: saa7146_read(dev, HPS_V_GAIN);*/
+	calculate_v_scale_registers(dev, field, vv->standard->v_field*2, height, &hps_v_scale, &hps_v_gain);
+
+	/* set horizontal scale */
+	hps_ctrl	= 0;
+	hps_h_prescale	= 0; /* all bits get set in the function */
+	hps_h_scale	= 0;
+	calculate_h_scale_registers(dev, vv->standard->h_pixels, width, vv->hflip, &hps_ctrl, &hps_v_gain, &hps_h_prescale, &hps_h_scale);
+
+	/* set hyo and hxo */
+	calculate_hxo_and_hyo(vv, &hps_h_scale, &hps_ctrl);
+	calculate_hps_source_and_sync(dev, source, sync, &hps_ctrl);
+
+	/* write out new register contents */
+	saa7146_write(dev, HPS_V_SCALE,	hps_v_scale);
+	saa7146_write(dev, HPS_V_GAIN,	hps_v_gain);
+	saa7146_write(dev, HPS_CTRL,	hps_ctrl);
+	saa7146_write(dev, HPS_H_PRESCALE,hps_h_prescale);
+	saa7146_write(dev, HPS_H_SCALE,	hps_h_scale);
+
+	/* upload shadow-ram registers */
+	saa7146_write(dev, MC2, (MASK_05 | MASK_06 | MASK_21 | MASK_22) );
+}
+
+/* calculate the new memory offsets for a desired position */
+static void saa7146_set_position(struct saa7146_dev *dev, int w_x, int w_y, int w_height, enum v4l2_field field, u32 pixelformat)
+{
+	struct saa7146_vv *vv = dev->vv_data;
+	struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev, pixelformat);
+
+	int b_depth = vv->ov_fmt->depth;
+	int b_bpl = vv->ov_fb.fmt.bytesperline;
+	/* The unsigned long cast is to remove a 64-bit compile warning since
+	   it looks like a 64-bit address is cast to a 32-bit value, even
+	   though the base pointer is really a 32-bit physical address that
+	   goes into a 32-bit DMA register.
+	   FIXME: might not work on some 64-bit platforms, but see the FIXME
+	   in struct v4l2_framebuffer (videodev2.h) for that.
+	 */
+	u32 base = (u32)(unsigned long)vv->ov_fb.base;
+
+	struct	saa7146_video_dma vdma1;
+
+	/* calculate memory offsets for picture, look if we shall top-down-flip */
+	vdma1.pitch	= 2*b_bpl;
+	if ( 0 == vv->vflip ) {
+		vdma1.base_even = base + (w_y * (vdma1.pitch/2)) + (w_x * (b_depth / 8));
+		vdma1.base_odd  = vdma1.base_even + (vdma1.pitch / 2);
+		vdma1.prot_addr = vdma1.base_even + (w_height * (vdma1.pitch / 2));
+	}
+	else {
+		vdma1.base_even = base + ((w_y+w_height) * (vdma1.pitch/2)) + (w_x * (b_depth / 8));
+		vdma1.base_odd  = vdma1.base_even - (vdma1.pitch / 2);
+		vdma1.prot_addr = vdma1.base_odd - (w_height * (vdma1.pitch / 2));
+	}
+
+	if (V4L2_FIELD_HAS_BOTH(field)) {
+	} else if (field == V4L2_FIELD_ALTERNATE) {
+		/* fixme */
+		vdma1.base_odd = vdma1.prot_addr;
+		vdma1.pitch /= 2;
+	} else if (field == V4L2_FIELD_TOP) {
+		vdma1.base_odd = vdma1.prot_addr;
+		vdma1.pitch /= 2;
+	} else if (field == V4L2_FIELD_BOTTOM) {
+		vdma1.base_odd = vdma1.base_even;
+		vdma1.base_even = vdma1.prot_addr;
+		vdma1.pitch /= 2;
+	}
+
+	if ( 0 != vv->vflip ) {
+		vdma1.pitch *= -1;
+	}
+
+	vdma1.base_page = sfmt->swap;
+	vdma1.num_line_byte = (vv->standard->v_field<<16)+vv->standard->h_pixels;
+
+	saa7146_write_out_dma(dev, 1, &vdma1);
+}
+
+static void saa7146_set_output_format(struct saa7146_dev *dev, unsigned long palette)
+{
+	u32 clip_format = saa7146_read(dev, CLIP_FORMAT_CTRL);
+
+	/* call helper function */
+	calculate_output_format_register(dev,palette,&clip_format);
+
+	/* update the hps registers */
+	saa7146_write(dev, CLIP_FORMAT_CTRL, clip_format);
+	saa7146_write(dev, MC2, (MASK_05 | MASK_21));
+}
+
+/* select input-source */
+void saa7146_set_hps_source_and_sync(struct saa7146_dev *dev, int source, int sync)
+{
+	struct saa7146_vv *vv = dev->vv_data;
+	u32 hps_ctrl = 0;
+
+	/* read old state */
+	hps_ctrl = saa7146_read(dev, HPS_CTRL);
+
+	hps_ctrl &= ~( MASK_31 | MASK_30 | MASK_28 );
+	hps_ctrl |= (source << 30) | (sync << 28);
+
+	/* write back & upload register */
+	saa7146_write(dev, HPS_CTRL, hps_ctrl);
+	saa7146_write(dev, MC2, (MASK_05 | MASK_21));
+
+	vv->current_hps_source = source;
+	vv->current_hps_sync = sync;
+}
+EXPORT_SYMBOL_GPL(saa7146_set_hps_source_and_sync);
+
+int saa7146_enable_overlay(struct saa7146_fh *fh)
+{
+	struct saa7146_dev *dev = fh->dev;
+	struct saa7146_vv *vv = dev->vv_data;
+
+	saa7146_set_window(dev, vv->ov.win.w.width, vv->ov.win.w.height, vv->ov.win.field);
+	saa7146_set_position(dev, vv->ov.win.w.left, vv->ov.win.w.top, vv->ov.win.w.height, vv->ov.win.field, vv->ov_fmt->pixelformat);
+	saa7146_set_output_format(dev, vv->ov_fmt->trans);
+	saa7146_set_clipping_rect(fh);
+
+	/* enable video dma1 */
+	saa7146_write(dev, MC1, (MASK_06 | MASK_22));
+	return 0;
+}
+
+void saa7146_disable_overlay(struct saa7146_fh *fh)
+{
+	struct saa7146_dev *dev = fh->dev;
+
+	/* disable clipping + video dma1 */
+	saa7146_disable_clipping(dev);
+	saa7146_write(dev, MC1, MASK_22);
+}
+
+void saa7146_write_out_dma(struct saa7146_dev* dev, int which, struct saa7146_video_dma* vdma)
+{
+	int where = 0;
+
+	if( which < 1 || which > 3) {
+		return;
+	}
+
+	/* calculate starting address */
+	where  = (which-1)*0x18;
+
+	saa7146_write(dev, where,	vdma->base_odd);
+	saa7146_write(dev, where+0x04,	vdma->base_even);
+	saa7146_write(dev, where+0x08,	vdma->prot_addr);
+	saa7146_write(dev, where+0x0c,	vdma->pitch);
+	saa7146_write(dev, where+0x10,	vdma->base_page);
+	saa7146_write(dev, where+0x14,	vdma->num_line_byte);
+
+	/* upload */
+	saa7146_write(dev, MC2, (MASK_02<<(which-1))|(MASK_18<<(which-1)));
+/*
+	printk("vdma%d.base_even:     0x%08x\n", which,vdma->base_even);
+	printk("vdma%d.base_odd:      0x%08x\n", which,vdma->base_odd);
+	printk("vdma%d.prot_addr:     0x%08x\n", which,vdma->prot_addr);
+	printk("vdma%d.base_page:     0x%08x\n", which,vdma->base_page);
+	printk("vdma%d.pitch:         0x%08x\n", which,vdma->pitch);
+	printk("vdma%d.num_line_byte: 0x%08x\n", which,vdma->num_line_byte);
+*/
+}
+
+static int calculate_video_dma_grab_packed(struct saa7146_dev* dev, struct saa7146_buf *buf)
+{
+	struct saa7146_vv *vv = dev->vv_data;
+	struct saa7146_video_dma vdma1;
+
+	struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat);
+
+	int width = buf->fmt->width;
+	int height = buf->fmt->height;
+	int bytesperline = buf->fmt->bytesperline;
+	enum v4l2_field field = buf->fmt->field;
+
+	int depth = sfmt->depth;
+
+	DEB_CAP("[size=%dx%d,fields=%s]\n",
+		width, height, v4l2_field_names[field]);
+
+	if( bytesperline != 0) {
+		vdma1.pitch = bytesperline*2;
+	} else {
+		vdma1.pitch = (width*depth*2)/8;
+	}
+	vdma1.num_line_byte	= ((vv->standard->v_field<<16) + vv->standard->h_pixels);
+	vdma1.base_page		= buf->pt[0].dma | ME1 | sfmt->swap;
+
+	if( 0 != vv->vflip ) {
+		vdma1.prot_addr	= buf->pt[0].offset;
+		vdma1.base_even	= buf->pt[0].offset+(vdma1.pitch/2)*height;
+		vdma1.base_odd	= vdma1.base_even - (vdma1.pitch/2);
+	} else {
+		vdma1.base_even	= buf->pt[0].offset;
+		vdma1.base_odd	= vdma1.base_even + (vdma1.pitch/2);
+		vdma1.prot_addr	= buf->pt[0].offset+(vdma1.pitch/2)*height;
+	}
+
+	if (V4L2_FIELD_HAS_BOTH(field)) {
+	} else if (field == V4L2_FIELD_ALTERNATE) {
+		/* fixme */
+		if ( vv->last_field == V4L2_FIELD_TOP ) {
+			vdma1.base_odd	= vdma1.prot_addr;
+			vdma1.pitch /= 2;
+		} else if ( vv->last_field == V4L2_FIELD_BOTTOM ) {
+			vdma1.base_odd	= vdma1.base_even;
+			vdma1.base_even = vdma1.prot_addr;
+			vdma1.pitch /= 2;
+		}
+	} else if (field == V4L2_FIELD_TOP) {
+		vdma1.base_odd	= vdma1.prot_addr;
+		vdma1.pitch /= 2;
+	} else if (field == V4L2_FIELD_BOTTOM) {
+		vdma1.base_odd	= vdma1.base_even;
+		vdma1.base_even = vdma1.prot_addr;
+		vdma1.pitch /= 2;
+	}
+
+	if( 0 != vv->vflip ) {
+		vdma1.pitch *= -1;
+	}
+
+	saa7146_write_out_dma(dev, 1, &vdma1);
+	return 0;
+}
+
+static int calc_planar_422(struct saa7146_vv *vv, struct saa7146_buf *buf, struct saa7146_video_dma *vdma2, struct saa7146_video_dma *vdma3)
+{
+	int height = buf->fmt->height;
+	int width = buf->fmt->width;
+
+	vdma2->pitch	= width;
+	vdma3->pitch	= width;
+
+	/* fixme: look at bytesperline! */
+
+	if( 0 != vv->vflip ) {
+		vdma2->prot_addr	= buf->pt[1].offset;
+		vdma2->base_even	= ((vdma2->pitch/2)*height)+buf->pt[1].offset;
+		vdma2->base_odd		= vdma2->base_even - (vdma2->pitch/2);
+
+		vdma3->prot_addr	= buf->pt[2].offset;
+		vdma3->base_even	= ((vdma3->pitch/2)*height)+buf->pt[2].offset;
+		vdma3->base_odd		= vdma3->base_even - (vdma3->pitch/2);
+	} else {
+		vdma3->base_even	= buf->pt[2].offset;
+		vdma3->base_odd		= vdma3->base_even + (vdma3->pitch/2);
+		vdma3->prot_addr	= (vdma3->pitch/2)*height+buf->pt[2].offset;
+
+		vdma2->base_even	= buf->pt[1].offset;
+		vdma2->base_odd		= vdma2->base_even + (vdma2->pitch/2);
+		vdma2->prot_addr	= (vdma2->pitch/2)*height+buf->pt[1].offset;
+	}
+
+	return 0;
+}
+
+static int calc_planar_420(struct saa7146_vv *vv, struct saa7146_buf *buf, struct saa7146_video_dma *vdma2, struct saa7146_video_dma *vdma3)
+{
+	int height = buf->fmt->height;
+	int width = buf->fmt->width;
+
+	vdma2->pitch	= width/2;
+	vdma3->pitch	= width/2;
+
+	if( 0 != vv->vflip ) {
+		vdma2->prot_addr	= buf->pt[2].offset;
+		vdma2->base_even	= ((vdma2->pitch/2)*height)+buf->pt[2].offset;
+		vdma2->base_odd		= vdma2->base_even - (vdma2->pitch/2);
+
+		vdma3->prot_addr	= buf->pt[1].offset;
+		vdma3->base_even	= ((vdma3->pitch/2)*height)+buf->pt[1].offset;
+		vdma3->base_odd		= vdma3->base_even - (vdma3->pitch/2);
+
+	} else {
+		vdma3->base_even	= buf->pt[2].offset;
+		vdma3->base_odd		= vdma3->base_even + (vdma3->pitch);
+		vdma3->prot_addr	= (vdma3->pitch/2)*height+buf->pt[2].offset;
+
+		vdma2->base_even	= buf->pt[1].offset;
+		vdma2->base_odd		= vdma2->base_even + (vdma2->pitch);
+		vdma2->prot_addr	= (vdma2->pitch/2)*height+buf->pt[1].offset;
+	}
+	return 0;
+}
+
+static int calculate_video_dma_grab_planar(struct saa7146_dev* dev, struct saa7146_buf *buf)
+{
+	struct saa7146_vv *vv = dev->vv_data;
+	struct saa7146_video_dma vdma1;
+	struct saa7146_video_dma vdma2;
+	struct saa7146_video_dma vdma3;
+
+	struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat);
+
+	int width = buf->fmt->width;
+	int height = buf->fmt->height;
+	enum v4l2_field field = buf->fmt->field;
+
+	BUG_ON(0 == buf->pt[0].dma);
+	BUG_ON(0 == buf->pt[1].dma);
+	BUG_ON(0 == buf->pt[2].dma);
+
+	DEB_CAP("[size=%dx%d,fields=%s]\n",
+		width, height, v4l2_field_names[field]);
+
+	/* fixme: look at bytesperline! */
+
+	/* fixme: what happens for user space buffers here?. The offsets are
+	   most likely wrong, this version here only works for page-aligned
+	   buffers, modifications to the pagetable-functions are necessary...*/
+
+	vdma1.pitch		= width*2;
+	vdma1.num_line_byte	= ((vv->standard->v_field<<16) + vv->standard->h_pixels);
+	vdma1.base_page		= buf->pt[0].dma | ME1;
+
+	if( 0 != vv->vflip ) {
+		vdma1.prot_addr	= buf->pt[0].offset;
+		vdma1.base_even	= ((vdma1.pitch/2)*height)+buf->pt[0].offset;
+		vdma1.base_odd	= vdma1.base_even - (vdma1.pitch/2);
+	} else {
+		vdma1.base_even	= buf->pt[0].offset;
+		vdma1.base_odd	= vdma1.base_even + (vdma1.pitch/2);
+		vdma1.prot_addr	= (vdma1.pitch/2)*height+buf->pt[0].offset;
+	}
+
+	vdma2.num_line_byte	= 0; /* unused */
+	vdma2.base_page		= buf->pt[1].dma | ME1;
+
+	vdma3.num_line_byte	= 0; /* unused */
+	vdma3.base_page		= buf->pt[2].dma | ME1;
+
+	switch( sfmt->depth ) {
+		case 12: {
+			calc_planar_420(vv,buf,&vdma2,&vdma3);
+			break;
+		}
+		case 16: {
+			calc_planar_422(vv,buf,&vdma2,&vdma3);
+			break;
+		}
+		default: {
+			return -1;
+		}
+	}
+
+	if (V4L2_FIELD_HAS_BOTH(field)) {
+	} else if (field == V4L2_FIELD_ALTERNATE) {
+		/* fixme */
+		vdma1.base_odd	= vdma1.prot_addr;
+		vdma1.pitch /= 2;
+		vdma2.base_odd	= vdma2.prot_addr;
+		vdma2.pitch /= 2;
+		vdma3.base_odd	= vdma3.prot_addr;
+		vdma3.pitch /= 2;
+	} else if (field == V4L2_FIELD_TOP) {
+		vdma1.base_odd	= vdma1.prot_addr;
+		vdma1.pitch /= 2;
+		vdma2.base_odd	= vdma2.prot_addr;
+		vdma2.pitch /= 2;
+		vdma3.base_odd	= vdma3.prot_addr;
+		vdma3.pitch /= 2;
+	} else if (field == V4L2_FIELD_BOTTOM) {
+		vdma1.base_odd	= vdma1.base_even;
+		vdma1.base_even = vdma1.prot_addr;
+		vdma1.pitch /= 2;
+		vdma2.base_odd	= vdma2.base_even;
+		vdma2.base_even = vdma2.prot_addr;
+		vdma2.pitch /= 2;
+		vdma3.base_odd	= vdma3.base_even;
+		vdma3.base_even = vdma3.prot_addr;
+		vdma3.pitch /= 2;
+	}
+
+	if( 0 != vv->vflip ) {
+		vdma1.pitch *= -1;
+		vdma2.pitch *= -1;
+		vdma3.pitch *= -1;
+	}
+
+	saa7146_write_out_dma(dev, 1, &vdma1);
+	if( (sfmt->flags & FORMAT_BYTE_SWAP) != 0 ) {
+		saa7146_write_out_dma(dev, 3, &vdma2);
+		saa7146_write_out_dma(dev, 2, &vdma3);
+	} else {
+		saa7146_write_out_dma(dev, 2, &vdma2);
+		saa7146_write_out_dma(dev, 3, &vdma3);
+	}
+	return 0;
+}
+
+static void program_capture_engine(struct saa7146_dev *dev, int planar)
+{
+	struct saa7146_vv *vv = dev->vv_data;
+	int count = 0;
+
+	unsigned long e_wait = vv->current_hps_sync == SAA7146_HPS_SYNC_PORT_A ? CMD_E_FID_A : CMD_E_FID_B;
+	unsigned long o_wait = vv->current_hps_sync == SAA7146_HPS_SYNC_PORT_A ? CMD_O_FID_A : CMD_O_FID_B;
+
+	/* wait for o_fid_a/b / e_fid_a/b toggle only if rps register 0 is not set*/
+	WRITE_RPS0(CMD_PAUSE | CMD_OAN | CMD_SIG0 | o_wait);
+	WRITE_RPS0(CMD_PAUSE | CMD_OAN | CMD_SIG0 | e_wait);
+
+	/* set rps register 0 */
+	WRITE_RPS0(CMD_WR_REG | (1 << 8) | (MC2/4));
+	WRITE_RPS0(MASK_27 | MASK_11);
+
+	/* turn on video-dma1 */
+	WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4));
+	WRITE_RPS0(MASK_06 | MASK_22);			/* => mask */
+	WRITE_RPS0(MASK_06 | MASK_22);			/* => values */
+	if( 0 != planar ) {
+		/* turn on video-dma2 */
+		WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4));
+		WRITE_RPS0(MASK_05 | MASK_21);			/* => mask */
+		WRITE_RPS0(MASK_05 | MASK_21);			/* => values */
+
+		/* turn on video-dma3 */
+		WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4));
+		WRITE_RPS0(MASK_04 | MASK_20);			/* => mask */
+		WRITE_RPS0(MASK_04 | MASK_20);			/* => values */
+	}
+
+	/* wait for o_fid_a/b / e_fid_a/b toggle */
+	if ( vv->last_field == V4L2_FIELD_INTERLACED ) {
+		WRITE_RPS0(CMD_PAUSE | o_wait);
+		WRITE_RPS0(CMD_PAUSE | e_wait);
+	} else if ( vv->last_field == V4L2_FIELD_TOP ) {
+		WRITE_RPS0(CMD_PAUSE | (vv->current_hps_sync == SAA7146_HPS_SYNC_PORT_A ? MASK_10 : MASK_09));
+		WRITE_RPS0(CMD_PAUSE | o_wait);
+	} else if ( vv->last_field == V4L2_FIELD_BOTTOM ) {
+		WRITE_RPS0(CMD_PAUSE | (vv->current_hps_sync == SAA7146_HPS_SYNC_PORT_A ? MASK_10 : MASK_09));
+		WRITE_RPS0(CMD_PAUSE | e_wait);
+	}
+
+	/* turn off video-dma1 */
+	WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4));
+	WRITE_RPS0(MASK_22 | MASK_06);			/* => mask */
+	WRITE_RPS0(MASK_22);				/* => values */
+	if( 0 != planar ) {
+		/* turn off video-dma2 */
+		WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4));
+		WRITE_RPS0(MASK_05 | MASK_21);			/* => mask */
+		WRITE_RPS0(MASK_21);				/* => values */
+
+		/* turn off video-dma3 */
+		WRITE_RPS0(CMD_WR_REG_MASK | (MC1/4));
+		WRITE_RPS0(MASK_04 | MASK_20);			/* => mask */
+		WRITE_RPS0(MASK_20);				/* => values */
+	}
+
+	/* generate interrupt */
+	WRITE_RPS0(CMD_INTERRUPT);
+
+	/* stop */
+	WRITE_RPS0(CMD_STOP);
+}
+
+void saa7146_set_capture(struct saa7146_dev *dev, struct saa7146_buf *buf, struct saa7146_buf *next)
+{
+	struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat);
+	struct saa7146_vv *vv = dev->vv_data;
+	u32 vdma1_prot_addr;
+
+	DEB_CAP("buf:%p, next:%p\n", buf, next);
+
+	vdma1_prot_addr = saa7146_read(dev, PROT_ADDR1);
+	if( 0 == vdma1_prot_addr ) {
+		/* clear out beginning of streaming bit (rps register 0)*/
+		DEB_CAP("forcing sync to new frame\n");
+		saa7146_write(dev, MC2, MASK_27 );
+	}
+
+	saa7146_set_window(dev, buf->fmt->width, buf->fmt->height, buf->fmt->field);
+	saa7146_set_output_format(dev, sfmt->trans);
+	saa7146_disable_clipping(dev);
+
+	if ( vv->last_field == V4L2_FIELD_INTERLACED ) {
+	} else if ( vv->last_field == V4L2_FIELD_TOP ) {
+		vv->last_field = V4L2_FIELD_BOTTOM;
+	} else if ( vv->last_field == V4L2_FIELD_BOTTOM ) {
+		vv->last_field = V4L2_FIELD_TOP;
+	}
+
+	if( 0 != IS_PLANAR(sfmt->trans)) {
+		calculate_video_dma_grab_planar(dev, buf);
+		program_capture_engine(dev,1);
+	} else {
+		calculate_video_dma_grab_packed(dev, buf);
+		program_capture_engine(dev,0);
+	}
+
+/*
+	printk("vdma%d.base_even:     0x%08x\n", 1,saa7146_read(dev,BASE_EVEN1));
+	printk("vdma%d.base_odd:      0x%08x\n", 1,saa7146_read(dev,BASE_ODD1));
+	printk("vdma%d.prot_addr:     0x%08x\n", 1,saa7146_read(dev,PROT_ADDR1));
+	printk("vdma%d.base_page:     0x%08x\n", 1,saa7146_read(dev,BASE_PAGE1));
+	printk("vdma%d.pitch:         0x%08x\n", 1,saa7146_read(dev,PITCH1));
+	printk("vdma%d.num_line_byte: 0x%08x\n", 1,saa7146_read(dev,NUM_LINE_BYTE1));
+	printk("vdma%d => vptr      : 0x%08x\n", 1,saa7146_read(dev,PCI_VDP1));
+*/
+
+	/* write the address of the rps-program */
+	saa7146_write(dev, RPS_ADDR0, dev->d_rps0.dma_handle);
+
+	/* turn on rps */
+	saa7146_write(dev, MC1, (MASK_12 | MASK_28));
+}
diff --git a/drivers/media/common/saa7146/saa7146_i2c.c b/drivers/media/common/saa7146/saa7146_i2c.c
new file mode 100644
index 000000000..220271981
--- /dev/null
+++ b/drivers/media/common/saa7146/saa7146_i2c.c
@@ -0,0 +1,423 @@
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <media/saa7146_vv.h>
+
+static u32 saa7146_i2c_func(struct i2c_adapter *adapter)
+{
+	/* DEB_I2C("'%s'\n", adapter->name); */
+
+	return	  I2C_FUNC_I2C
+		| I2C_FUNC_SMBUS_QUICK
+		| I2C_FUNC_SMBUS_READ_BYTE	| I2C_FUNC_SMBUS_WRITE_BYTE
+		| I2C_FUNC_SMBUS_READ_BYTE_DATA | I2C_FUNC_SMBUS_WRITE_BYTE_DATA;
+}
+
+/* this function returns the status-register of our i2c-device */
+static inline u32 saa7146_i2c_status(struct saa7146_dev *dev)
+{
+	u32 iicsta = saa7146_read(dev, I2C_STATUS);
+	/* DEB_I2C("status: 0x%08x\n", iicsta); */
+	return iicsta;
+}
+
+/* this function runs through the i2c-messages and prepares the data to be
+   sent through the saa7146. have a look at the specifications p. 122 ff
+   to understand this. it returns the number of u32s to send, or -1
+   in case of an error. */
+static int saa7146_i2c_msg_prepare(const struct i2c_msg *m, int num, __le32 *op)
+{
+	int h1, h2;
+	int i, j, addr;
+	int mem = 0, op_count = 0;
+
+	/* first determine size of needed memory */
+	for(i = 0; i < num; i++) {
+		mem += m[i].len + 1;
+	}
+
+	/* worst case: we need one u32 for three bytes to be send
+	   plus one extra byte to address the device */
+	mem = 1 + ((mem-1) / 3);
+
+	/* we assume that op points to a memory of at least
+	 * SAA7146_I2C_MEM bytes size. if we exceed this limit...
+	 */
+	if ((4 * mem) > SAA7146_I2C_MEM) {
+		/* DEB_I2C("cannot prepare i2c-message\n"); */
+		return -ENOMEM;
+	}
+
+	/* be careful: clear out the i2c-mem first */
+	memset(op,0,sizeof(__le32)*mem);
+
+	/* loop through all messages */
+	for(i = 0; i < num; i++) {
+
+		/* insert the address of the i2c-slave.
+		   note: we get 7 bit i2c-addresses,
+		   so we have to perform a translation */
+		addr = (m[i].addr*2) + ( (0 != (m[i].flags & I2C_M_RD)) ? 1 : 0);
+		h1 = op_count/3; h2 = op_count%3;
+		op[h1] |= cpu_to_le32(	    (u8)addr << ((3-h2)*8));
+		op[h1] |= cpu_to_le32(SAA7146_I2C_START << ((3-h2)*2));
+		op_count++;
+
+		/* loop through all bytes of message i */
+		for(j = 0; j < m[i].len; j++) {
+			/* insert the data bytes */
+			h1 = op_count/3; h2 = op_count%3;
+			op[h1] |= cpu_to_le32( (u32)((u8)m[i].buf[j]) << ((3-h2)*8));
+			op[h1] |= cpu_to_le32(       SAA7146_I2C_CONT << ((3-h2)*2));
+			op_count++;
+		}
+
+	}
+
+	/* have a look at the last byte inserted:
+	  if it was: ...CONT change it to ...STOP */
+	h1 = (op_count-1)/3; h2 = (op_count-1)%3;
+	if ( SAA7146_I2C_CONT == (0x3 & (le32_to_cpu(op[h1]) >> ((3-h2)*2))) ) {
+		op[h1] &= ~cpu_to_le32(0x2 << ((3-h2)*2));
+		op[h1] |= cpu_to_le32(SAA7146_I2C_STOP << ((3-h2)*2));
+	}
+
+	/* return the number of u32s to send */
+	return mem;
+}
+
+/* this functions loops through all i2c-messages. normally, it should determine
+   which bytes were read through the adapter and write them back to the corresponding
+   i2c-message. but instead, we simply write back all bytes.
+   fixme: this could be improved. */
+static int saa7146_i2c_msg_cleanup(const struct i2c_msg *m, int num, __le32 *op)
+{
+	int i, j;
+	int op_count = 0;
+
+	/* loop through all messages */
+	for(i = 0; i < num; i++) {
+
+		op_count++;
+
+		/* loop through all bytes of message i */
+		for(j = 0; j < m[i].len; j++) {
+			/* write back all bytes that could have been read */
+			m[i].buf[j] = (le32_to_cpu(op[op_count/3]) >> ((3-(op_count%3))*8));
+			op_count++;
+		}
+	}
+
+	return 0;
+}
+
+/* this functions resets the i2c-device and returns 0 if everything was fine, otherwise -1 */
+static int saa7146_i2c_reset(struct saa7146_dev *dev)
+{
+	/* get current status */
+	u32 status = saa7146_i2c_status(dev);
+
+	/* clear registers for sure */
+	saa7146_write(dev, I2C_STATUS, dev->i2c_bitrate);
+	saa7146_write(dev, I2C_TRANSFER, 0);
+
+	/* check if any operation is still in progress */
+	if ( 0 != ( status & SAA7146_I2C_BUSY) ) {
+
+		/* yes, kill ongoing operation */
+		DEB_I2C("busy_state detected\n");
+
+		/* set "ABORT-OPERATION"-bit (bit 7)*/
+		saa7146_write(dev, I2C_STATUS, (dev->i2c_bitrate | MASK_07));
+		saa7146_write(dev, MC2, (MASK_00 | MASK_16));
+		msleep(SAA7146_I2C_DELAY);
+
+		/* clear all error-bits pending; this is needed because p.123, note 1 */
+		saa7146_write(dev, I2C_STATUS, dev->i2c_bitrate);
+		saa7146_write(dev, MC2, (MASK_00 | MASK_16));
+		msleep(SAA7146_I2C_DELAY);
+	}
+
+	/* check if any error is (still) present. (this can be necessary because p.123, note 1) */
+	status = saa7146_i2c_status(dev);
+
+	if ( dev->i2c_bitrate != status ) {
+
+		DEB_I2C("error_state detected. status:0x%08x\n", status);
+
+		/* Repeat the abort operation. This seems to be necessary
+		   after serious protocol errors caused by e.g. the SAA7740 */
+		saa7146_write(dev, I2C_STATUS, (dev->i2c_bitrate | MASK_07));
+		saa7146_write(dev, MC2, (MASK_00 | MASK_16));
+		msleep(SAA7146_I2C_DELAY);
+
+		/* clear all error-bits pending */
+		saa7146_write(dev, I2C_STATUS, dev->i2c_bitrate);
+		saa7146_write(dev, MC2, (MASK_00 | MASK_16));
+		msleep(SAA7146_I2C_DELAY);
+
+		/* the data sheet says it might be necessary to clear the status
+		   twice after an abort */
+		saa7146_write(dev, I2C_STATUS, dev->i2c_bitrate);
+		saa7146_write(dev, MC2, (MASK_00 | MASK_16));
+		msleep(SAA7146_I2C_DELAY);
+	}
+
+	/* if any error is still present, a fatal error has occurred ... */
+	status = saa7146_i2c_status(dev);
+	if ( dev->i2c_bitrate != status ) {
+		DEB_I2C("fatal error. status:0x%08x\n", status);
+		return -1;
+	}
+
+	return 0;
+}
+
+/* this functions writes out the data-byte 'dword' to the i2c-device.
+   it returns 0 if ok, -1 if the transfer failed, -2 if the transfer
+   failed badly (e.g. address error) */
+static int saa7146_i2c_writeout(struct saa7146_dev *dev, __le32 *dword, int short_delay)
+{
+	u32 status = 0, mc2 = 0;
+	int trial = 0;
+	unsigned long timeout;
+
+	/* write out i2c-command */
+	DEB_I2C("before: 0x%08x (status: 0x%08x), %d\n",
+		*dword, saa7146_read(dev, I2C_STATUS), dev->i2c_op);
+
+	if( 0 != (SAA7146_USE_I2C_IRQ & dev->ext->flags)) {
+
+		saa7146_write(dev, I2C_STATUS,	 dev->i2c_bitrate);
+		saa7146_write(dev, I2C_TRANSFER, le32_to_cpu(*dword));
+
+		dev->i2c_op = 1;
+		SAA7146_ISR_CLEAR(dev, MASK_16|MASK_17);
+		SAA7146_IER_ENABLE(dev, MASK_16|MASK_17);
+		saa7146_write(dev, MC2, (MASK_00 | MASK_16));
+
+		timeout = HZ/100 + 1; /* 10ms */
+		timeout = wait_event_interruptible_timeout(dev->i2c_wq, dev->i2c_op == 0, timeout);
+		if (timeout == -ERESTARTSYS || dev->i2c_op) {
+			SAA7146_IER_DISABLE(dev, MASK_16|MASK_17);
+			SAA7146_ISR_CLEAR(dev, MASK_16|MASK_17);
+			if (timeout == -ERESTARTSYS)
+				/* a signal arrived */
+				return -ERESTARTSYS;
+
+			pr_warn("%s %s [irq]: timed out waiting for end of xfer\n",
+				dev->name, __func__);
+			return -EIO;
+		}
+		status = saa7146_read(dev, I2C_STATUS);
+	} else {
+		saa7146_write(dev, I2C_STATUS,	 dev->i2c_bitrate);
+		saa7146_write(dev, I2C_TRANSFER, le32_to_cpu(*dword));
+		saa7146_write(dev, MC2, (MASK_00 | MASK_16));
+
+		/* do not poll for i2c-status before upload is complete */
+		timeout = jiffies + HZ/100 + 1; /* 10ms */
+		while(1) {
+			mc2 = (saa7146_read(dev, MC2) & 0x1);
+			if( 0 != mc2 ) {
+				break;
+			}
+			if (time_after(jiffies,timeout)) {
+				pr_warn("%s %s: timed out waiting for MC2\n",
+					dev->name, __func__);
+				return -EIO;
+			}
+		}
+		/* wait until we get a transfer done or error */
+		timeout = jiffies + HZ/100 + 1; /* 10ms */
+		/* first read usually delivers bogus results... */
+		saa7146_i2c_status(dev);
+		while(1) {
+			status = saa7146_i2c_status(dev);
+			if ((status & 0x3) != 1)
+				break;
+			if (time_after(jiffies,timeout)) {
+				/* this is normal when probing the bus
+				 * (no answer from nonexisistant device...)
+				 */
+				pr_warn("%s %s [poll]: timed out waiting for end of xfer\n",
+					dev->name, __func__);
+				return -EIO;
+			}
+			if (++trial < 50 && short_delay)
+				udelay(10);
+			else
+				msleep(1);
+		}
+	}
+
+	/* give a detailed status report */
+	if ( 0 != (status & (SAA7146_I2C_SPERR | SAA7146_I2C_APERR |
+			     SAA7146_I2C_DTERR | SAA7146_I2C_DRERR |
+			     SAA7146_I2C_AL    | SAA7146_I2C_ERR   |
+			     SAA7146_I2C_BUSY)) ) {
+
+		if ( 0 == (status & SAA7146_I2C_ERR) ||
+		     0 == (status & SAA7146_I2C_BUSY) ) {
+			/* it may take some time until ERR goes high - ignore */
+			DEB_I2C("unexpected i2c status %04x\n", status);
+		}
+		if( 0 != (status & SAA7146_I2C_SPERR) ) {
+			DEB_I2C("error due to invalid start/stop condition\n");
+		}
+		if( 0 != (status & SAA7146_I2C_DTERR) ) {
+			DEB_I2C("error in data transmission\n");
+		}
+		if( 0 != (status & SAA7146_I2C_DRERR) ) {
+			DEB_I2C("error when receiving data\n");
+		}
+		if( 0 != (status & SAA7146_I2C_AL) ) {
+			DEB_I2C("error because arbitration lost\n");
+		}
+
+		/* we handle address-errors here */
+		if( 0 != (status & SAA7146_I2C_APERR) ) {
+			DEB_I2C("error in address phase\n");
+			return -EREMOTEIO;
+		}
+
+		return -EIO;
+	}
+
+	/* read back data, just in case we were reading ... */
+	*dword = cpu_to_le32(saa7146_read(dev, I2C_TRANSFER));
+
+	DEB_I2C("after: 0x%08x\n", *dword);
+	return 0;
+}
+
+static int saa7146_i2c_transfer(struct saa7146_dev *dev, const struct i2c_msg *msgs, int num, int retries)
+{
+	int i = 0, count = 0;
+	__le32 *buffer = dev->d_i2c.cpu_addr;
+	int err = 0;
+	int short_delay = 0;
+
+	if (mutex_lock_interruptible(&dev->i2c_lock))
+		return -ERESTARTSYS;
+
+	for(i=0;i<num;i++) {
+		DEB_I2C("msg:%d/%d\n", i+1, num);
+	}
+
+	/* prepare the message(s), get number of u32s to transfer */
+	count = saa7146_i2c_msg_prepare(msgs, num, buffer);
+	if ( 0 > count ) {
+		err = -1;
+		goto out;
+	}
+
+	if ( count > 3 || 0 != (SAA7146_I2C_SHORT_DELAY & dev->ext->flags) )
+		short_delay = 1;
+
+	do {
+		/* reset the i2c-device if necessary */
+		err = saa7146_i2c_reset(dev);
+		if ( 0 > err ) {
+			DEB_I2C("could not reset i2c-device\n");
+			goto out;
+		}
+
+		/* write out the u32s one after another */
+		for(i = 0; i < count; i++) {
+			err = saa7146_i2c_writeout(dev, &buffer[i], short_delay);
+			if ( 0 != err) {
+				/* this one is unsatisfying: some i2c slaves on some
+				   dvb cards don't acknowledge correctly, so the saa7146
+				   thinks that an address error occurred. in that case, the
+				   transaction should be retrying, even if an address error
+				   occurred. analog saa7146 based cards extensively rely on
+				   i2c address probing, however, and address errors indicate that a
+				   device is really *not* there. retrying in that case
+				   increases the time the device needs to probe greatly, so
+				   it should be avoided. So we bail out in irq mode after an
+				   address error and trust the saa7146 address error detection. */
+				if (-EREMOTEIO == err && 0 != (SAA7146_USE_I2C_IRQ & dev->ext->flags))
+					goto out;
+				DEB_I2C("error while sending message(s). starting again\n");
+				break;
+			}
+		}
+		if( 0 == err ) {
+			err = num;
+			break;
+		}
+
+		/* delay a bit before retrying */
+		msleep(10);
+
+	} while (err != num && retries--);
+
+	/* quit if any error occurred */
+	if (err != num)
+		goto out;
+
+	/* if any things had to be read, get the results */
+	if ( 0 != saa7146_i2c_msg_cleanup(msgs, num, buffer)) {
+		DEB_I2C("could not cleanup i2c-message\n");
+		err = -1;
+		goto out;
+	}
+
+	/* return the number of delivered messages */
+	DEB_I2C("transmission successful. (msg:%d)\n", err);
+out:
+	/* another bug in revision 0: the i2c-registers get uploaded randomly by other
+	   uploads, so we better clear them out before continuing */
+	if( 0 == dev->revision ) {
+		__le32 zero = 0;
+		saa7146_i2c_reset(dev);
+		if( 0 != saa7146_i2c_writeout(dev, &zero, short_delay)) {
+			pr_info("revision 0 error. this should never happen\n");
+		}
+	}
+
+	mutex_unlock(&dev->i2c_lock);
+	return err;
+}
+
+/* utility functions */
+static int saa7146_i2c_xfer(struct i2c_adapter* adapter, struct i2c_msg *msg, int num)
+{
+	struct v4l2_device *v4l2_dev = i2c_get_adapdata(adapter);
+	struct saa7146_dev *dev = to_saa7146_dev(v4l2_dev);
+
+	/* use helper function to transfer data */
+	return saa7146_i2c_transfer(dev, msg, num, adapter->retries);
+}
+
+
+/*****************************************************************************/
+/* i2c-adapter helper functions                                              */
+
+/* exported algorithm data */
+static struct i2c_algorithm saa7146_algo = {
+	.master_xfer	= saa7146_i2c_xfer,
+	.functionality	= saa7146_i2c_func,
+};
+
+int saa7146_i2c_adapter_prepare(struct saa7146_dev *dev, struct i2c_adapter *i2c_adapter, u32 bitrate)
+{
+	DEB_EE("bitrate: 0x%08x\n", bitrate);
+
+	/* enable i2c-port pins */
+	saa7146_write(dev, MC1, (MASK_08 | MASK_24));
+
+	dev->i2c_bitrate = bitrate;
+	saa7146_i2c_reset(dev);
+
+	if (i2c_adapter) {
+		i2c_set_adapdata(i2c_adapter, &dev->v4l2_dev);
+		i2c_adapter->dev.parent    = &dev->pci->dev;
+		i2c_adapter->algo	   = &saa7146_algo;
+		i2c_adapter->algo_data     = NULL;
+		i2c_adapter->timeout = SAA7146_I2C_TIMEOUT;
+		i2c_adapter->retries = SAA7146_I2C_RETRIES;
+	}
+
+	return 0;
+}
diff --git a/drivers/media/common/saa7146/saa7146_vbi.c b/drivers/media/common/saa7146/saa7146_vbi.c
new file mode 100644
index 000000000..2da995758
--- /dev/null
+++ b/drivers/media/common/saa7146/saa7146_vbi.c
@@ -0,0 +1,498 @@
+#include <media/saa7146_vv.h>
+
+static int vbi_pixel_to_capture = 720 * 2;
+
+static int vbi_workaround(struct saa7146_dev *dev)
+{
+	struct saa7146_vv *vv = dev->vv_data;
+
+	u32          *cpu;
+	dma_addr_t   dma_addr;
+
+	int count = 0;
+	int i;
+
+	DECLARE_WAITQUEUE(wait, current);
+
+	DEB_VBI("dev:%p\n", dev);
+
+	/* once again, a bug in the saa7146: the brs acquisition
+	   is buggy and especially the BXO-counter does not work
+	   as specified. there is this workaround, but please
+	   don't let me explain it. ;-) */
+
+	cpu = pci_alloc_consistent(dev->pci, 4096, &dma_addr);
+	if (NULL == cpu)
+		return -ENOMEM;
+
+	/* setup some basic programming, just for the workaround */
+	saa7146_write(dev, BASE_EVEN3,	dma_addr);
+	saa7146_write(dev, BASE_ODD3,	dma_addr+vbi_pixel_to_capture);
+	saa7146_write(dev, PROT_ADDR3,	dma_addr+4096);
+	saa7146_write(dev, PITCH3,	vbi_pixel_to_capture);
+	saa7146_write(dev, BASE_PAGE3,	0x0);
+	saa7146_write(dev, NUM_LINE_BYTE3, (2<<16)|((vbi_pixel_to_capture)<<0));
+	saa7146_write(dev, MC2, MASK_04|MASK_20);
+
+	/* load brs-control register */
+	WRITE_RPS1(CMD_WR_REG | (1 << 8) | (BRS_CTRL/4));
+	/* BXO = 1h, BRS to outbound */
+	WRITE_RPS1(0xc000008c);
+	/* wait for vbi_a or vbi_b*/
+	if ( 0 != (SAA7146_USE_PORT_B_FOR_VBI & dev->ext_vv_data->flags)) {
+		DEB_D("...using port b\n");
+		WRITE_RPS1(CMD_PAUSE | CMD_OAN | CMD_SIG1 | CMD_E_FID_B);
+		WRITE_RPS1(CMD_PAUSE | CMD_OAN | CMD_SIG1 | CMD_O_FID_B);
+/*
+		WRITE_RPS1(CMD_PAUSE | MASK_09);
+*/
+	} else {
+		DEB_D("...using port a\n");
+		WRITE_RPS1(CMD_PAUSE | MASK_10);
+	}
+	/* upload brs */
+	WRITE_RPS1(CMD_UPLOAD | MASK_08);
+	/* load brs-control register */
+	WRITE_RPS1(CMD_WR_REG | (1 << 8) | (BRS_CTRL/4));
+	/* BYO = 1, BXO = NQBIL (=1728 for PAL, for NTSC this is 858*2) - NumByte3 (=1440) = 288 */
+	WRITE_RPS1(((1728-(vbi_pixel_to_capture)) << 7) | MASK_19);
+	/* wait for brs_done */
+	WRITE_RPS1(CMD_PAUSE | MASK_08);
+	/* upload brs */
+	WRITE_RPS1(CMD_UPLOAD | MASK_08);
+	/* load video-dma3 NumLines3 and NumBytes3 */
+	WRITE_RPS1(CMD_WR_REG | (1 << 8) | (NUM_LINE_BYTE3/4));
+	/* dev->vbi_count*2 lines, 720 pixel (= 1440 Bytes) */
+	WRITE_RPS1((2 << 16) | (vbi_pixel_to_capture));
+	/* load brs-control register */
+	WRITE_RPS1(CMD_WR_REG | (1 << 8) | (BRS_CTRL/4));
+	/* Set BRS right: note: this is an experimental value for BXO (=> PAL!) */
+	WRITE_RPS1((540 << 7) | (5 << 19));  // 5 == vbi_start
+	/* wait for brs_done */
+	WRITE_RPS1(CMD_PAUSE | MASK_08);
+	/* upload brs and video-dma3*/
+	WRITE_RPS1(CMD_UPLOAD | MASK_08 | MASK_04);
+	/* load mc2 register: enable dma3 */
+	WRITE_RPS1(CMD_WR_REG | (1 << 8) | (MC1/4));
+	WRITE_RPS1(MASK_20 | MASK_04);
+	/* generate interrupt */
+	WRITE_RPS1(CMD_INTERRUPT);
+	/* stop rps1 */
+	WRITE_RPS1(CMD_STOP);
+
+	/* we have to do the workaround twice to be sure that
+	   everything is ok */
+	for(i = 0; i < 2; i++) {
+
+		/* indicate to the irq handler that we do the workaround */
+		saa7146_write(dev, MC2, MASK_31|MASK_15);
+
+		saa7146_write(dev, NUM_LINE_BYTE3, (1<<16)|(2<<0));
+		saa7146_write(dev, MC2, MASK_04|MASK_20);
+
+		/* enable rps1 irqs */
+		SAA7146_IER_ENABLE(dev,MASK_28);
+
+		/* prepare to wait to be woken up by the irq-handler */
+		add_wait_queue(&vv->vbi_wq, &wait);
+		set_current_state(TASK_INTERRUPTIBLE);
+
+		/* start rps1 to enable workaround */
+		saa7146_write(dev, RPS_ADDR1, dev->d_rps1.dma_handle);
+		saa7146_write(dev, MC1, (MASK_13 | MASK_29));
+
+		schedule();
+
+		DEB_VBI("brs bug workaround %d/1\n", i);
+
+		remove_wait_queue(&vv->vbi_wq, &wait);
+		__set_current_state(TASK_RUNNING);
+
+		/* disable rps1 irqs */
+		SAA7146_IER_DISABLE(dev,MASK_28);
+
+		/* stop video-dma3 */
+		saa7146_write(dev, MC1, MASK_20);
+
+		if(signal_pending(current)) {
+
+			DEB_VBI("aborted (rps:0x%08x)\n",
+				saa7146_read(dev, RPS_ADDR1));
+
+			/* stop rps1 for sure */
+			saa7146_write(dev, MC1, MASK_29);
+
+			pci_free_consistent(dev->pci, 4096, cpu, dma_addr);
+			return -EINTR;
+		}
+	}
+
+	pci_free_consistent(dev->pci, 4096, cpu, dma_addr);
+	return 0;
+}
+
+static void saa7146_set_vbi_capture(struct saa7146_dev *dev, struct saa7146_buf *buf, struct saa7146_buf *next)
+{
+	struct saa7146_vv *vv = dev->vv_data;
+
+	struct saa7146_video_dma vdma3;
+
+	int count = 0;
+	unsigned long e_wait = vv->current_hps_sync == SAA7146_HPS_SYNC_PORT_A ? CMD_E_FID_A : CMD_E_FID_B;
+	unsigned long o_wait = vv->current_hps_sync == SAA7146_HPS_SYNC_PORT_A ? CMD_O_FID_A : CMD_O_FID_B;
+
+/*
+	vdma3.base_even	= 0xc8000000+2560*70;
+	vdma3.base_odd	= 0xc8000000;
+	vdma3.prot_addr	= 0xc8000000+2560*164;
+	vdma3.pitch	= 2560;
+	vdma3.base_page	= 0;
+	vdma3.num_line_byte = (64<<16)|((vbi_pixel_to_capture)<<0); // set above!
+*/
+	vdma3.base_even	= buf->pt[2].offset;
+	vdma3.base_odd	= buf->pt[2].offset + 16 * vbi_pixel_to_capture;
+	vdma3.prot_addr	= buf->pt[2].offset + 16 * 2 * vbi_pixel_to_capture;
+	vdma3.pitch	= vbi_pixel_to_capture;
+	vdma3.base_page	= buf->pt[2].dma | ME1;
+	vdma3.num_line_byte = (16 << 16) | vbi_pixel_to_capture;
+
+	saa7146_write_out_dma(dev, 3, &vdma3);
+
+	/* write beginning of rps-program */
+	count = 0;
+
+	/* wait for o_fid_a/b / e_fid_a/b toggle only if bit 1 is not set */
+
+	/* we don't wait here for the first field anymore. this is different from the video
+	   capture and might cause that the first buffer is only half filled (with only
+	   one field). but since this is some sort of streaming data, this is not that negative.
+	   but by doing this, we can use the whole engine from videobuf-dma-sg.c... */
+
+/*
+	WRITE_RPS1(CMD_PAUSE | CMD_OAN | CMD_SIG1 | e_wait);
+	WRITE_RPS1(CMD_PAUSE | CMD_OAN | CMD_SIG1 | o_wait);
+*/
+	/* set bit 1 */
+	WRITE_RPS1(CMD_WR_REG | (1 << 8) | (MC2/4));
+	WRITE_RPS1(MASK_28 | MASK_12);
+
+	/* turn on video-dma3 */
+	WRITE_RPS1(CMD_WR_REG_MASK | (MC1/4));
+	WRITE_RPS1(MASK_04 | MASK_20);			/* => mask */
+	WRITE_RPS1(MASK_04 | MASK_20);			/* => values */
+
+	/* wait for o_fid_a/b / e_fid_a/b toggle */
+	WRITE_RPS1(CMD_PAUSE | o_wait);
+	WRITE_RPS1(CMD_PAUSE | e_wait);
+
+	/* generate interrupt */
+	WRITE_RPS1(CMD_INTERRUPT);
+
+	/* stop */
+	WRITE_RPS1(CMD_STOP);
+
+	/* enable rps1 irqs */
+	SAA7146_IER_ENABLE(dev, MASK_28);
+
+	/* write the address of the rps-program */
+	saa7146_write(dev, RPS_ADDR1, dev->d_rps1.dma_handle);
+
+	/* turn on rps */
+	saa7146_write(dev, MC1, (MASK_13 | MASK_29));
+}
+
+static int buffer_activate(struct saa7146_dev *dev,
+			   struct saa7146_buf *buf,
+			   struct saa7146_buf *next)
+{
+	struct saa7146_vv *vv = dev->vv_data;
+	buf->vb.state = VIDEOBUF_ACTIVE;
+
+	DEB_VBI("dev:%p, buf:%p, next:%p\n", dev, buf, next);
+	saa7146_set_vbi_capture(dev,buf,next);
+
+	mod_timer(&vv->vbi_dmaq.timeout, jiffies+BUFFER_TIMEOUT);
+	return 0;
+}
+
+static int buffer_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb,enum v4l2_field field)
+{
+	struct file *file = q->priv_data;
+	struct saa7146_fh *fh = file->private_data;
+	struct saa7146_dev *dev = fh->dev;
+	struct saa7146_buf *buf = (struct saa7146_buf *)vb;
+
+	int err = 0;
+	int lines, llength, size;
+
+	lines   = 16 * 2 ; /* 2 fields */
+	llength = vbi_pixel_to_capture;
+	size = lines * llength;
+
+	DEB_VBI("vb:%p\n", vb);
+
+	if (0 != buf->vb.baddr  &&  buf->vb.bsize < size) {
+		DEB_VBI("size mismatch\n");
+		return -EINVAL;
+	}
+
+	if (buf->vb.size != size)
+		saa7146_dma_free(dev,q,buf);
+
+	if (VIDEOBUF_NEEDS_INIT == buf->vb.state) {
+		struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb);
+
+		buf->vb.width  = llength;
+		buf->vb.height = lines;
+		buf->vb.size   = size;
+		buf->vb.field  = field;	// FIXME: check this
+
+		saa7146_pgtable_free(dev->pci, &buf->pt[2]);
+		saa7146_pgtable_alloc(dev->pci, &buf->pt[2]);
+
+		err = videobuf_iolock(q,&buf->vb, NULL);
+		if (err)
+			goto oops;
+		err = saa7146_pgtable_build_single(dev->pci, &buf->pt[2],
+						 dma->sglist, dma->sglen);
+		if (0 != err)
+			return err;
+	}
+	buf->vb.state = VIDEOBUF_PREPARED;
+	buf->activate = buffer_activate;
+
+	return 0;
+
+ oops:
+	DEB_VBI("error out\n");
+	saa7146_dma_free(dev,q,buf);
+
+	return err;
+}
+
+static int buffer_setup(struct videobuf_queue *q, unsigned int *count, unsigned int *size)
+{
+	int llength,lines;
+
+	lines   = 16 * 2 ; /* 2 fields */
+	llength = vbi_pixel_to_capture;
+
+	*size = lines * llength;
+	*count = 2;
+
+	DEB_VBI("count:%d, size:%d\n", *count, *size);
+
+	return 0;
+}
+
+static void buffer_queue(struct videobuf_queue *q, struct videobuf_buffer *vb)
+{
+	struct file *file = q->priv_data;
+	struct saa7146_fh *fh = file->private_data;
+	struct saa7146_dev *dev = fh->dev;
+	struct saa7146_vv *vv = dev->vv_data;
+	struct saa7146_buf *buf = (struct saa7146_buf *)vb;
+
+	DEB_VBI("vb:%p\n", vb);
+	saa7146_buffer_queue(dev, &vv->vbi_dmaq, buf);
+}
+
+static void buffer_release(struct videobuf_queue *q, struct videobuf_buffer *vb)
+{
+	struct file *file = q->priv_data;
+	struct saa7146_fh *fh   = file->private_data;
+	struct saa7146_dev *dev = fh->dev;
+	struct saa7146_buf *buf = (struct saa7146_buf *)vb;
+
+	DEB_VBI("vb:%p\n", vb);
+	saa7146_dma_free(dev,q,buf);
+}
+
+static struct videobuf_queue_ops vbi_qops = {
+	.buf_setup    = buffer_setup,
+	.buf_prepare  = buffer_prepare,
+	.buf_queue    = buffer_queue,
+	.buf_release  = buffer_release,
+};
+
+/* ------------------------------------------------------------------ */
+
+static void vbi_stop(struct saa7146_fh *fh, struct file *file)
+{
+	struct saa7146_dev *dev = fh->dev;
+	struct saa7146_vv *vv = dev->vv_data;
+	unsigned long flags;
+	DEB_VBI("dev:%p, fh:%p\n", dev, fh);
+
+	spin_lock_irqsave(&dev->slock,flags);
+
+	/* disable rps1  */
+	saa7146_write(dev, MC1, MASK_29);
+
+	/* disable rps1 irqs */
+	SAA7146_IER_DISABLE(dev, MASK_28);
+
+	/* shut down dma 3 transfers */
+	saa7146_write(dev, MC1, MASK_20);
+
+	if (vv->vbi_dmaq.curr)
+		saa7146_buffer_finish(dev, &vv->vbi_dmaq, VIDEOBUF_DONE);
+
+	videobuf_queue_cancel(&fh->vbi_q);
+
+	vv->vbi_streaming = NULL;
+
+	del_timer(&vv->vbi_dmaq.timeout);
+	del_timer(&vv->vbi_read_timeout);
+
+	spin_unlock_irqrestore(&dev->slock, flags);
+}
+
+static void vbi_read_timeout(unsigned long data)
+{
+	struct file *file = (struct file*)data;
+	struct saa7146_fh *fh = file->private_data;
+	struct saa7146_dev *dev = fh->dev;
+
+	DEB_VBI("dev:%p, fh:%p\n", dev, fh);
+
+	vbi_stop(fh, file);
+}
+
+static void vbi_init(struct saa7146_dev *dev, struct saa7146_vv *vv)
+{
+	DEB_VBI("dev:%p\n", dev);
+
+	INIT_LIST_HEAD(&vv->vbi_dmaq.queue);
+
+	init_timer(&vv->vbi_dmaq.timeout);
+	vv->vbi_dmaq.timeout.function = saa7146_buffer_timeout;
+	vv->vbi_dmaq.timeout.data     = (unsigned long)(&vv->vbi_dmaq);
+	vv->vbi_dmaq.dev              = dev;
+
+	init_waitqueue_head(&vv->vbi_wq);
+}
+
+static int vbi_open(struct saa7146_dev *dev, struct file *file)
+{
+	struct saa7146_fh *fh = file->private_data;
+	struct saa7146_vv *vv = fh->dev->vv_data;
+
+	u32 arbtr_ctrl	= saa7146_read(dev, PCI_BT_V1);
+	int ret = 0;
+
+	DEB_VBI("dev:%p, fh:%p\n", dev, fh);
+
+	ret = saa7146_res_get(fh, RESOURCE_DMA3_BRS);
+	if (0 == ret) {
+		DEB_S("cannot get vbi RESOURCE_DMA3_BRS resource\n");
+		return -EBUSY;
+	}
+
+	/* adjust arbitrition control for video dma 3 */
+	arbtr_ctrl &= ~0x1f0000;
+	arbtr_ctrl |=  0x1d0000;
+	saa7146_write(dev, PCI_BT_V1, arbtr_ctrl);
+	saa7146_write(dev, MC2, (MASK_04|MASK_20));
+
+	videobuf_queue_sg_init(&fh->vbi_q, &vbi_qops,
+			    &dev->pci->dev, &dev->slock,
+			    V4L2_BUF_TYPE_VBI_CAPTURE,
+			    V4L2_FIELD_SEQ_TB, // FIXME: does this really work?
+			    sizeof(struct saa7146_buf),
+			    file, &dev->v4l2_lock);
+
+	vv->vbi_read_timeout.function = vbi_read_timeout;
+	vv->vbi_read_timeout.data = (unsigned long)file;
+
+	/* initialize the brs */
+	if ( 0 != (SAA7146_USE_PORT_B_FOR_VBI & dev->ext_vv_data->flags)) {
+		saa7146_write(dev, BRS_CTRL, MASK_30|MASK_29 | (7 << 19));
+	} else {
+		saa7146_write(dev, BRS_CTRL, 0x00000001);
+
+		if (0 != (ret = vbi_workaround(dev))) {
+			DEB_VBI("vbi workaround failed!\n");
+			/* return ret;*/
+		}
+	}
+
+	/* upload brs register */
+	saa7146_write(dev, MC2, (MASK_08|MASK_24));
+	return 0;
+}
+
+static void vbi_close(struct saa7146_dev *dev, struct file *file)
+{
+	struct saa7146_fh *fh = file->private_data;
+	struct saa7146_vv *vv = dev->vv_data;
+	DEB_VBI("dev:%p, fh:%p\n", dev, fh);
+
+	if( fh == vv->vbi_streaming ) {
+		vbi_stop(fh, file);
+	}
+	saa7146_res_free(fh, RESOURCE_DMA3_BRS);
+}
+
+static void vbi_irq_done(struct saa7146_dev *dev, unsigned long status)
+{
+	struct saa7146_vv *vv = dev->vv_data;
+	spin_lock(&dev->slock);
+
+	if (vv->vbi_dmaq.curr) {
+		DEB_VBI("dev:%p, curr:%p\n", dev, vv->vbi_dmaq.curr);
+		/* this must be += 2, one count for each field */
+		vv->vbi_fieldcount+=2;
+		vv->vbi_dmaq.curr->vb.field_count = vv->vbi_fieldcount;
+		saa7146_buffer_finish(dev, &vv->vbi_dmaq, VIDEOBUF_DONE);
+	} else {
+		DEB_VBI("dev:%p\n", dev);
+	}
+	saa7146_buffer_next(dev, &vv->vbi_dmaq, 1);
+
+	spin_unlock(&dev->slock);
+}
+
+static ssize_t vbi_read(struct file *file, char __user *data, size_t count, loff_t *ppos)
+{
+	struct saa7146_fh *fh = file->private_data;
+	struct saa7146_dev *dev = fh->dev;
+	struct saa7146_vv *vv = dev->vv_data;
+	ssize_t ret = 0;
+
+	DEB_VBI("dev:%p, fh:%p\n", dev, fh);
+
+	if( NULL == vv->vbi_streaming ) {
+		// fixme: check if dma3 is available
+		// fixme: activate vbi engine here if necessary. (really?)
+		vv->vbi_streaming = fh;
+	}
+
+	if( fh != vv->vbi_streaming ) {
+		DEB_VBI("open %p is already using vbi capture\n",
+			vv->vbi_streaming);
+		return -EBUSY;
+	}
+
+	mod_timer(&vv->vbi_read_timeout, jiffies+BUFFER_TIMEOUT);
+	ret = videobuf_read_stream(&fh->vbi_q, data, count, ppos, 1,
+				   file->f_flags & O_NONBLOCK);
+/*
+	printk("BASE_ODD3:      0x%08x\n", saa7146_read(dev, BASE_ODD3));
+	printk("BASE_EVEN3:     0x%08x\n", saa7146_read(dev, BASE_EVEN3));
+	printk("PROT_ADDR3:     0x%08x\n", saa7146_read(dev, PROT_ADDR3));
+	printk("PITCH3:         0x%08x\n", saa7146_read(dev, PITCH3));
+	printk("BASE_PAGE3:     0x%08x\n", saa7146_read(dev, BASE_PAGE3));
+	printk("NUM_LINE_BYTE3: 0x%08x\n", saa7146_read(dev, NUM_LINE_BYTE3));
+	printk("BRS_CTRL:       0x%08x\n", saa7146_read(dev, BRS_CTRL));
+*/
+	return ret;
+}
+
+struct saa7146_use_ops saa7146_vbi_uops = {
+	.init		= vbi_init,
+	.open		= vbi_open,
+	.release	= vbi_close,
+	.irq_done	= vbi_irq_done,
+	.read		= vbi_read,
+};
diff --git a/drivers/media/common/saa7146/saa7146_video.c b/drivers/media/common/saa7146/saa7146_video.c
new file mode 100644
index 000000000..30779498c
--- /dev/null
+++ b/drivers/media/common/saa7146/saa7146_video.c
@@ -0,0 +1,1309 @@
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <media/saa7146_vv.h>
+#include <media/v4l2-event.h>
+#include <media/v4l2-ctrls.h>
+#include <linux/module.h>
+
+static int max_memory = 32;
+
+module_param(max_memory, int, 0644);
+MODULE_PARM_DESC(max_memory, "maximum memory usage for capture buffers (default: 32Mb)");
+
+#define IS_CAPTURE_ACTIVE(fh) \
+	(((vv->video_status & STATUS_CAPTURE) != 0) && (vv->video_fh == fh))
+
+#define IS_OVERLAY_ACTIVE(fh) \
+	(((vv->video_status & STATUS_OVERLAY) != 0) && (vv->video_fh == fh))
+
+/* format descriptions for capture and preview */
+static struct saa7146_format formats[] = {
+	{
+		.name		= "RGB-8 (3-3-2)",
+		.pixelformat	= V4L2_PIX_FMT_RGB332,
+		.trans		= RGB08_COMPOSED,
+		.depth		= 8,
+		.flags		= 0,
+	}, {
+		.name		= "RGB-16 (5/B-6/G-5/R)",
+		.pixelformat	= V4L2_PIX_FMT_RGB565,
+		.trans		= RGB16_COMPOSED,
+		.depth		= 16,
+		.flags		= 0,
+	}, {
+		.name		= "RGB-24 (B-G-R)",
+		.pixelformat	= V4L2_PIX_FMT_BGR24,
+		.trans		= RGB24_COMPOSED,
+		.depth		= 24,
+		.flags		= 0,
+	}, {
+		.name		= "RGB-32 (B-G-R)",
+		.pixelformat	= V4L2_PIX_FMT_BGR32,
+		.trans		= RGB32_COMPOSED,
+		.depth		= 32,
+		.flags		= 0,
+	}, {
+		.name		= "RGB-32 (R-G-B)",
+		.pixelformat	= V4L2_PIX_FMT_RGB32,
+		.trans		= RGB32_COMPOSED,
+		.depth		= 32,
+		.flags		= 0,
+		.swap		= 0x2,
+	}, {
+		.name		= "Greyscale-8",
+		.pixelformat	= V4L2_PIX_FMT_GREY,
+		.trans		= Y8,
+		.depth		= 8,
+		.flags		= 0,
+	}, {
+		.name		= "YUV 4:2:2 planar (Y-Cb-Cr)",
+		.pixelformat	= V4L2_PIX_FMT_YUV422P,
+		.trans		= YUV422_DECOMPOSED,
+		.depth		= 16,
+		.flags		= FORMAT_BYTE_SWAP|FORMAT_IS_PLANAR,
+	}, {
+		.name		= "YVU 4:2:0 planar (Y-Cb-Cr)",
+		.pixelformat	= V4L2_PIX_FMT_YVU420,
+		.trans		= YUV420_DECOMPOSED,
+		.depth		= 12,
+		.flags		= FORMAT_BYTE_SWAP|FORMAT_IS_PLANAR,
+	}, {
+		.name		= "YUV 4:2:0 planar (Y-Cb-Cr)",
+		.pixelformat	= V4L2_PIX_FMT_YUV420,
+		.trans		= YUV420_DECOMPOSED,
+		.depth		= 12,
+		.flags		= FORMAT_IS_PLANAR,
+	}, {
+		.name		= "YUV 4:2:2 (U-Y-V-Y)",
+		.pixelformat	= V4L2_PIX_FMT_UYVY,
+		.trans		= YUV422_COMPOSED,
+		.depth		= 16,
+		.flags		= 0,
+	}
+};
+
+/* unfortunately, the saa7146 contains a bug which prevents it from doing on-the-fly byte swaps.
+   due to this, it's impossible to provide additional *packed* formats, which are simply byte swapped
+   (like V4L2_PIX_FMT_YUYV) ... 8-( */
+
+static int NUM_FORMATS = sizeof(formats)/sizeof(struct saa7146_format);
+
+struct saa7146_format* saa7146_format_by_fourcc(struct saa7146_dev *dev, int fourcc)
+{
+	int i, j = NUM_FORMATS;
+
+	for (i = 0; i < j; i++) {
+		if (formats[i].pixelformat == fourcc) {
+			return formats+i;
+		}
+	}
+
+	DEB_D("unknown pixelformat:'%4.4s'\n", (char *)&fourcc);
+	return NULL;
+}
+
+static int vidioc_try_fmt_vid_overlay(struct file *file, void *fh, struct v4l2_format *f);
+
+int saa7146_start_preview(struct saa7146_fh *fh)
+{
+	struct saa7146_dev *dev = fh->dev;
+	struct saa7146_vv *vv = dev->vv_data;
+	struct v4l2_format fmt;
+	int ret = 0, err = 0;
+
+	DEB_EE("dev:%p, fh:%p\n", dev, fh);
+
+	/* check if we have overlay information */
+	if (vv->ov.fh == NULL) {
+		DEB_D("no overlay data available. try S_FMT first.\n");
+		return -EAGAIN;
+	}
+
+	/* check if streaming capture is running */
+	if (IS_CAPTURE_ACTIVE(fh) != 0) {
+		DEB_D("streaming capture is active\n");
+		return -EBUSY;
+	}
+
+	/* check if overlay is running */
+	if (IS_OVERLAY_ACTIVE(fh) != 0) {
+		if (vv->video_fh == fh) {
+			DEB_D("overlay is already active\n");
+			return 0;
+		}
+		DEB_D("overlay is already active in another open\n");
+		return -EBUSY;
+	}
+
+	if (0 == saa7146_res_get(fh, RESOURCE_DMA1_HPS|RESOURCE_DMA2_CLP)) {
+		DEB_D("cannot get necessary overlay resources\n");
+		return -EBUSY;
+	}
+
+	fmt.fmt.win = vv->ov.win;
+	err = vidioc_try_fmt_vid_overlay(NULL, fh, &fmt);
+	if (0 != err) {
+		saa7146_res_free(vv->video_fh, RESOURCE_DMA1_HPS|RESOURCE_DMA2_CLP);
+		return -EBUSY;
+	}
+	vv->ov.win = fmt.fmt.win;
+
+	DEB_D("%dx%d+%d+%d %s field=%s\n",
+	      vv->ov.win.w.width, vv->ov.win.w.height,
+	      vv->ov.win.w.left, vv->ov.win.w.top,
+	      vv->ov_fmt->name, v4l2_field_names[vv->ov.win.field]);
+
+	if (0 != (ret = saa7146_enable_overlay(fh))) {
+		DEB_D("enabling overlay failed: %d\n", ret);
+		saa7146_res_free(vv->video_fh, RESOURCE_DMA1_HPS|RESOURCE_DMA2_CLP);
+		return ret;
+	}
+
+	vv->video_status = STATUS_OVERLAY;
+	vv->video_fh = fh;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(saa7146_start_preview);
+
+int saa7146_stop_preview(struct saa7146_fh *fh)
+{
+	struct saa7146_dev *dev = fh->dev;
+	struct saa7146_vv *vv = dev->vv_data;
+
+	DEB_EE("dev:%p, fh:%p\n", dev, fh);
+
+	/* check if streaming capture is running */
+	if (IS_CAPTURE_ACTIVE(fh) != 0) {
+		DEB_D("streaming capture is active\n");
+		return -EBUSY;
+	}
+
+	/* check if overlay is running at all */
+	if ((vv->video_status & STATUS_OVERLAY) == 0) {
+		DEB_D("no active overlay\n");
+		return 0;
+	}
+
+	if (vv->video_fh != fh) {
+		DEB_D("overlay is active, but in another open\n");
+		return -EBUSY;
+	}
+
+	vv->video_status = 0;
+	vv->video_fh = NULL;
+
+	saa7146_disable_overlay(fh);
+
+	saa7146_res_free(fh, RESOURCE_DMA1_HPS|RESOURCE_DMA2_CLP);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(saa7146_stop_preview);
+
+/********************************************************************************/
+/* common pagetable functions */
+
+static int saa7146_pgtable_build(struct saa7146_dev *dev, struct saa7146_buf *buf)
+{
+	struct pci_dev *pci = dev->pci;
+	struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb);
+	struct scatterlist *list = dma->sglist;
+	int length = dma->sglen;
+	struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat);
+
+	DEB_EE("dev:%p, buf:%p, sg_len:%d\n", dev, buf, length);
+
+	if( 0 != IS_PLANAR(sfmt->trans)) {
+		struct saa7146_pgtable *pt1 = &buf->pt[0];
+		struct saa7146_pgtable *pt2 = &buf->pt[1];
+		struct saa7146_pgtable *pt3 = &buf->pt[2];
+		__le32  *ptr1, *ptr2, *ptr3;
+		__le32 fill;
+
+		int size = buf->fmt->width*buf->fmt->height;
+		int i,p,m1,m2,m3,o1,o2;
+
+		switch( sfmt->depth ) {
+			case 12: {
+				/* create some offsets inside the page table */
+				m1 = ((size+PAGE_SIZE)/PAGE_SIZE)-1;
+				m2 = ((size+(size/4)+PAGE_SIZE)/PAGE_SIZE)-1;
+				m3 = ((size+(size/2)+PAGE_SIZE)/PAGE_SIZE)-1;
+				o1 = size%PAGE_SIZE;
+				o2 = (size+(size/4))%PAGE_SIZE;
+				DEB_CAP("size:%d, m1:%d, m2:%d, m3:%d, o1:%d, o2:%d\n",
+					size, m1, m2, m3, o1, o2);
+				break;
+			}
+			case 16: {
+				/* create some offsets inside the page table */
+				m1 = ((size+PAGE_SIZE)/PAGE_SIZE)-1;
+				m2 = ((size+(size/2)+PAGE_SIZE)/PAGE_SIZE)-1;
+				m3 = ((2*size+PAGE_SIZE)/PAGE_SIZE)-1;
+				o1 = size%PAGE_SIZE;
+				o2 = (size+(size/2))%PAGE_SIZE;
+				DEB_CAP("size:%d, m1:%d, m2:%d, m3:%d, o1:%d, o2:%d\n",
+					size, m1, m2, m3, o1, o2);
+				break;
+			}
+			default: {
+				return -1;
+			}
+		}
+
+		ptr1 = pt1->cpu;
+		ptr2 = pt2->cpu;
+		ptr3 = pt3->cpu;
+
+		/* walk all pages, copy all page addresses to ptr1 */
+		for (i = 0; i < length; i++, list++) {
+			for (p = 0; p * 4096 < list->length; p++, ptr1++) {
+				*ptr1 = cpu_to_le32(sg_dma_address(list) - list->offset);
+			}
+		}
+/*
+		ptr1 = pt1->cpu;
+		for(j=0;j<40;j++) {
+			printk("ptr1 %d: 0x%08x\n",j,ptr1[j]);
+		}
+*/
+
+		/* if we have a user buffer, the first page may not be
+		   aligned to a page boundary. */
+		pt1->offset = dma->sglist->offset;
+		pt2->offset = pt1->offset+o1;
+		pt3->offset = pt1->offset+o2;
+
+		/* create video-dma2 page table */
+		ptr1 = pt1->cpu;
+		for(i = m1; i <= m2 ; i++, ptr2++) {
+			*ptr2 = ptr1[i];
+		}
+		fill = *(ptr2-1);
+		for(;i<1024;i++,ptr2++) {
+			*ptr2 = fill;
+		}
+		/* create video-dma3 page table */
+		ptr1 = pt1->cpu;
+		for(i = m2; i <= m3; i++,ptr3++) {
+			*ptr3 = ptr1[i];
+		}
+		fill = *(ptr3-1);
+		for(;i<1024;i++,ptr3++) {
+			*ptr3 = fill;
+		}
+		/* finally: finish up video-dma1 page table */
+		ptr1 = pt1->cpu+m1;
+		fill = pt1->cpu[m1];
+		for(i=m1;i<1024;i++,ptr1++) {
+			*ptr1 = fill;
+		}
+/*
+		ptr1 = pt1->cpu;
+		ptr2 = pt2->cpu;
+		ptr3 = pt3->cpu;
+		for(j=0;j<40;j++) {
+			printk("ptr1 %d: 0x%08x\n",j,ptr1[j]);
+		}
+		for(j=0;j<40;j++) {
+			printk("ptr2 %d: 0x%08x\n",j,ptr2[j]);
+		}
+		for(j=0;j<40;j++) {
+			printk("ptr3 %d: 0x%08x\n",j,ptr3[j]);
+		}
+*/
+	} else {
+		struct saa7146_pgtable *pt = &buf->pt[0];
+		return saa7146_pgtable_build_single(pci, pt, list, length);
+	}
+
+	return 0;
+}
+
+
+/********************************************************************************/
+/* file operations */
+
+static int video_begin(struct saa7146_fh *fh)
+{
+	struct saa7146_dev *dev = fh->dev;
+	struct saa7146_vv *vv = dev->vv_data;
+	struct saa7146_format *fmt = NULL;
+	unsigned int resource;
+	int ret = 0, err = 0;
+
+	DEB_EE("dev:%p, fh:%p\n", dev, fh);
+
+	if ((vv->video_status & STATUS_CAPTURE) != 0) {
+		if (vv->video_fh == fh) {
+			DEB_S("already capturing\n");
+			return 0;
+		}
+		DEB_S("already capturing in another open\n");
+		return -EBUSY;
+	}
+
+	if ((vv->video_status & STATUS_OVERLAY) != 0) {
+		DEB_S("warning: suspending overlay video for streaming capture\n");
+		vv->ov_suspend = vv->video_fh;
+		err = saa7146_stop_preview(vv->video_fh); /* side effect: video_status is now 0, video_fh is NULL */
+		if (0 != err) {
+			DEB_D("suspending video failed. aborting\n");
+			return err;
+		}
+	}
+
+	fmt = saa7146_format_by_fourcc(dev, vv->video_fmt.pixelformat);
+	/* we need to have a valid format set here */
+	BUG_ON(NULL == fmt);
+
+	if (0 != (fmt->flags & FORMAT_IS_PLANAR)) {
+		resource = RESOURCE_DMA1_HPS|RESOURCE_DMA2_CLP|RESOURCE_DMA3_BRS;
+	} else {
+		resource = RESOURCE_DMA1_HPS;
+	}
+
+	ret = saa7146_res_get(fh, resource);
+	if (0 == ret) {
+		DEB_S("cannot get capture resource %d\n", resource);
+		if (vv->ov_suspend != NULL) {
+			saa7146_start_preview(vv->ov_suspend);
+			vv->ov_suspend = NULL;
+		}
+		return -EBUSY;
+	}
+
+	/* clear out beginning of streaming bit (rps register 0)*/
+	saa7146_write(dev, MC2, MASK_27 );
+
+	/* enable rps0 irqs */
+	SAA7146_IER_ENABLE(dev, MASK_27);
+
+	vv->video_fh = fh;
+	vv->video_status = STATUS_CAPTURE;
+
+	return 0;
+}
+
+static int video_end(struct saa7146_fh *fh, struct file *file)
+{
+	struct saa7146_dev *dev = fh->dev;
+	struct saa7146_vv *vv = dev->vv_data;
+	struct saa7146_format *fmt = NULL;
+	unsigned long flags;
+	unsigned int resource;
+	u32 dmas = 0;
+	DEB_EE("dev:%p, fh:%p\n", dev, fh);
+
+	if ((vv->video_status & STATUS_CAPTURE) != STATUS_CAPTURE) {
+		DEB_S("not capturing\n");
+		return 0;
+	}
+
+	if (vv->video_fh != fh) {
+		DEB_S("capturing, but in another open\n");
+		return -EBUSY;
+	}
+
+	fmt = saa7146_format_by_fourcc(dev, vv->video_fmt.pixelformat);
+	/* we need to have a valid format set here */
+	BUG_ON(NULL == fmt);
+
+	if (0 != (fmt->flags & FORMAT_IS_PLANAR)) {
+		resource = RESOURCE_DMA1_HPS|RESOURCE_DMA2_CLP|RESOURCE_DMA3_BRS;
+		dmas = MASK_22 | MASK_21 | MASK_20;
+	} else {
+		resource = RESOURCE_DMA1_HPS;
+		dmas = MASK_22;
+	}
+	spin_lock_irqsave(&dev->slock,flags);
+
+	/* disable rps0  */
+	saa7146_write(dev, MC1, MASK_28);
+
+	/* disable rps0 irqs */
+	SAA7146_IER_DISABLE(dev, MASK_27);
+
+	/* shut down all used video dma transfers */
+	saa7146_write(dev, MC1, dmas);
+
+	spin_unlock_irqrestore(&dev->slock, flags);
+
+	vv->video_fh = NULL;
+	vv->video_status = 0;
+
+	saa7146_res_free(fh, resource);
+
+	if (vv->ov_suspend != NULL) {
+		saa7146_start_preview(vv->ov_suspend);
+		vv->ov_suspend = NULL;
+	}
+
+	return 0;
+}
+
+static int vidioc_querycap(struct file *file, void *fh, struct v4l2_capability *cap)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
+
+	strcpy((char *)cap->driver, "saa7146 v4l2");
+	strlcpy((char *)cap->card, dev->ext->name, sizeof(cap->card));
+	sprintf((char *)cap->bus_info, "PCI:%s", pci_name(dev->pci));
+	cap->device_caps =
+		V4L2_CAP_VIDEO_CAPTURE |
+		V4L2_CAP_VIDEO_OVERLAY |
+		V4L2_CAP_READWRITE |
+		V4L2_CAP_STREAMING;
+	cap->device_caps |= dev->ext_vv_data->capabilities;
+	cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS;
+	if (vdev->vfl_type == VFL_TYPE_GRABBER)
+		cap->device_caps &=
+			~(V4L2_CAP_VBI_CAPTURE | V4L2_CAP_SLICED_VBI_OUTPUT);
+	else
+		cap->device_caps &=
+			~(V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_VIDEO_OVERLAY | V4L2_CAP_AUDIO);
+	return 0;
+}
+
+static int vidioc_g_fbuf(struct file *file, void *fh, struct v4l2_framebuffer *fb)
+{
+	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
+	struct saa7146_vv *vv = dev->vv_data;
+
+	*fb = vv->ov_fb;
+	fb->capability = V4L2_FBUF_CAP_LIST_CLIPPING;
+	fb->flags = V4L2_FBUF_FLAG_PRIMARY;
+	return 0;
+}
+
+static int vidioc_s_fbuf(struct file *file, void *fh, const struct v4l2_framebuffer *fb)
+{
+	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
+	struct saa7146_vv *vv = dev->vv_data;
+	struct saa7146_format *fmt;
+
+	DEB_EE("VIDIOC_S_FBUF\n");
+
+	if (!capable(CAP_SYS_ADMIN) && !capable(CAP_SYS_RAWIO))
+		return -EPERM;
+
+	/* check args */
+	fmt = saa7146_format_by_fourcc(dev, fb->fmt.pixelformat);
+	if (NULL == fmt)
+		return -EINVAL;
+
+	/* planar formats are not allowed for overlay video, clipping and video dma would clash */
+	if (fmt->flags & FORMAT_IS_PLANAR)
+		DEB_S("planar pixelformat '%4.4s' not allowed for overlay\n",
+		      (char *)&fmt->pixelformat);
+
+	/* check if overlay is running */
+	if (IS_OVERLAY_ACTIVE(fh) != 0) {
+		if (vv->video_fh != fh) {
+			DEB_D("refusing to change framebuffer informations while overlay is active in another open\n");
+			return -EBUSY;
+		}
+	}
+
+	/* ok, accept it */
+	vv->ov_fb = *fb;
+	vv->ov_fmt = fmt;
+
+	if (vv->ov_fb.fmt.bytesperline < vv->ov_fb.fmt.width) {
+		vv->ov_fb.fmt.bytesperline = vv->ov_fb.fmt.width * fmt->depth / 8;
+		DEB_D("setting bytesperline to %d\n", vv->ov_fb.fmt.bytesperline);
+	}
+	return 0;
+}
+
+static int vidioc_enum_fmt_vid_cap(struct file *file, void *fh, struct v4l2_fmtdesc *f)
+{
+	if (f->index >= NUM_FORMATS)
+		return -EINVAL;
+	strlcpy((char *)f->description, formats[f->index].name,
+			sizeof(f->description));
+	f->pixelformat = formats[f->index].pixelformat;
+	return 0;
+}
+
+int saa7146_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct saa7146_dev *dev = container_of(ctrl->handler,
+				struct saa7146_dev, ctrl_handler);
+	struct saa7146_vv *vv = dev->vv_data;
+	u32 val;
+
+	switch (ctrl->id) {
+	case V4L2_CID_BRIGHTNESS:
+		val = saa7146_read(dev, BCS_CTRL);
+		val &= 0x00ffffff;
+		val |= (ctrl->val << 24);
+		saa7146_write(dev, BCS_CTRL, val);
+		saa7146_write(dev, MC2, MASK_22 | MASK_06);
+		break;
+
+	case V4L2_CID_CONTRAST:
+		val = saa7146_read(dev, BCS_CTRL);
+		val &= 0xff00ffff;
+		val |= (ctrl->val << 16);
+		saa7146_write(dev, BCS_CTRL, val);
+		saa7146_write(dev, MC2, MASK_22 | MASK_06);
+		break;
+
+	case V4L2_CID_SATURATION:
+		val = saa7146_read(dev, BCS_CTRL);
+		val &= 0xffffff00;
+		val |= (ctrl->val << 0);
+		saa7146_write(dev, BCS_CTRL, val);
+		saa7146_write(dev, MC2, MASK_22 | MASK_06);
+		break;
+
+	case V4L2_CID_HFLIP:
+		/* fixme: we can support changing VFLIP and HFLIP here... */
+		if ((vv->video_status & STATUS_CAPTURE))
+			return -EBUSY;
+		vv->hflip = ctrl->val;
+		break;
+
+	case V4L2_CID_VFLIP:
+		if ((vv->video_status & STATUS_CAPTURE))
+			return -EBUSY;
+		vv->vflip = ctrl->val;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	if ((vv->video_status & STATUS_OVERLAY) != 0) { /* CHECK: && (vv->video_fh == fh)) */
+		struct saa7146_fh *fh = vv->video_fh;
+
+		saa7146_stop_preview(fh);
+		saa7146_start_preview(fh);
+	}
+	return 0;
+}
+
+static int vidioc_g_parm(struct file *file, void *fh,
+		struct v4l2_streamparm *parm)
+{
+	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
+	struct saa7146_vv *vv = dev->vv_data;
+
+	if (parm->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+	parm->parm.capture.readbuffers = 1;
+	v4l2_video_std_frame_period(vv->standard->id,
+				    &parm->parm.capture.timeperframe);
+	return 0;
+}
+
+static int vidioc_g_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *f)
+{
+	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
+	struct saa7146_vv *vv = dev->vv_data;
+
+	f->fmt.pix = vv->video_fmt;
+	return 0;
+}
+
+static int vidioc_g_fmt_vid_overlay(struct file *file, void *fh, struct v4l2_format *f)
+{
+	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
+	struct saa7146_vv *vv = dev->vv_data;
+
+	f->fmt.win = vv->ov.win;
+	return 0;
+}
+
+static int vidioc_g_fmt_vbi_cap(struct file *file, void *fh, struct v4l2_format *f)
+{
+	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
+	struct saa7146_vv *vv = dev->vv_data;
+
+	f->fmt.vbi = vv->vbi_fmt;
+	return 0;
+}
+
+static int vidioc_try_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *f)
+{
+	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
+	struct saa7146_vv *vv = dev->vv_data;
+	struct saa7146_format *fmt;
+	enum v4l2_field field;
+	int maxw, maxh;
+	int calc_bpl;
+
+	DEB_EE("V4L2_BUF_TYPE_VIDEO_CAPTURE: dev:%p, fh:%p\n", dev, fh);
+
+	fmt = saa7146_format_by_fourcc(dev, f->fmt.pix.pixelformat);
+	if (NULL == fmt)
+		return -EINVAL;
+
+	field = f->fmt.pix.field;
+	maxw  = vv->standard->h_max_out;
+	maxh  = vv->standard->v_max_out;
+
+	if (V4L2_FIELD_ANY == field) {
+		field = (f->fmt.pix.height > maxh / 2)
+			? V4L2_FIELD_INTERLACED
+			: V4L2_FIELD_BOTTOM;
+	}
+	switch (field) {
+	case V4L2_FIELD_ALTERNATE:
+		vv->last_field = V4L2_FIELD_TOP;
+		maxh = maxh / 2;
+		break;
+	case V4L2_FIELD_TOP:
+	case V4L2_FIELD_BOTTOM:
+		vv->last_field = V4L2_FIELD_INTERLACED;
+		maxh = maxh / 2;
+		break;
+	case V4L2_FIELD_INTERLACED:
+		vv->last_field = V4L2_FIELD_INTERLACED;
+		break;
+	default:
+		DEB_D("no known field mode '%d'\n", field);
+		return -EINVAL;
+	}
+
+	f->fmt.pix.field = field;
+	f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M;
+	if (f->fmt.pix.width > maxw)
+		f->fmt.pix.width = maxw;
+	if (f->fmt.pix.height > maxh)
+		f->fmt.pix.height = maxh;
+
+	calc_bpl = (f->fmt.pix.width * fmt->depth) / 8;
+
+	if (f->fmt.pix.bytesperline < calc_bpl)
+		f->fmt.pix.bytesperline = calc_bpl;
+
+	if (f->fmt.pix.bytesperline > (2 * PAGE_SIZE * fmt->depth) / 8) /* arbitrary constraint */
+		f->fmt.pix.bytesperline = calc_bpl;
+
+	f->fmt.pix.sizeimage = f->fmt.pix.bytesperline * f->fmt.pix.height;
+	DEB_D("w:%d, h:%d, bytesperline:%d, sizeimage:%d\n",
+	      f->fmt.pix.width, f->fmt.pix.height,
+	      f->fmt.pix.bytesperline, f->fmt.pix.sizeimage);
+
+	return 0;
+}
+
+
+static int vidioc_try_fmt_vid_overlay(struct file *file, void *fh, struct v4l2_format *f)
+{
+	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
+	struct saa7146_vv *vv = dev->vv_data;
+	struct v4l2_window *win = &f->fmt.win;
+	enum v4l2_field field;
+	int maxw, maxh;
+
+	DEB_EE("dev:%p\n", dev);
+
+	if (NULL == vv->ov_fb.base) {
+		DEB_D("no fb base set\n");
+		return -EINVAL;
+	}
+	if (NULL == vv->ov_fmt) {
+		DEB_D("no fb fmt set\n");
+		return -EINVAL;
+	}
+	if (win->w.width < 48 || win->w.height < 32) {
+		DEB_D("min width/height. (%d,%d)\n",
+		      win->w.width, win->w.height);
+		return -EINVAL;
+	}
+	if (win->clipcount > 16) {
+		DEB_D("clipcount too big\n");
+		return -EINVAL;
+	}
+
+	field = win->field;
+	maxw  = vv->standard->h_max_out;
+	maxh  = vv->standard->v_max_out;
+
+	if (V4L2_FIELD_ANY == field) {
+		field = (win->w.height > maxh / 2)
+			? V4L2_FIELD_INTERLACED
+			: V4L2_FIELD_TOP;
+		}
+	switch (field) {
+	case V4L2_FIELD_TOP:
+	case V4L2_FIELD_BOTTOM:
+	case V4L2_FIELD_ALTERNATE:
+		maxh = maxh / 2;
+		break;
+	case V4L2_FIELD_INTERLACED:
+		break;
+	default:
+		DEB_D("no known field mode '%d'\n", field);
+		return -EINVAL;
+	}
+
+	win->field = field;
+	if (win->w.width > maxw)
+		win->w.width = maxw;
+	if (win->w.height > maxh)
+		win->w.height = maxh;
+
+	return 0;
+}
+
+static int vidioc_s_fmt_vid_cap(struct file *file, void *__fh, struct v4l2_format *f)
+{
+	struct saa7146_fh *fh = __fh;
+	struct saa7146_dev *dev = fh->dev;
+	struct saa7146_vv *vv = dev->vv_data;
+	int err;
+
+	DEB_EE("V4L2_BUF_TYPE_VIDEO_CAPTURE: dev:%p, fh:%p\n", dev, fh);
+	if (IS_CAPTURE_ACTIVE(fh) != 0) {
+		DEB_EE("streaming capture is active\n");
+		return -EBUSY;
+	}
+	err = vidioc_try_fmt_vid_cap(file, fh, f);
+	if (0 != err)
+		return err;
+	vv->video_fmt = f->fmt.pix;
+	DEB_EE("set to pixelformat '%4.4s'\n",
+	       (char *)&vv->video_fmt.pixelformat);
+	return 0;
+}
+
+static int vidioc_s_fmt_vid_overlay(struct file *file, void *__fh, struct v4l2_format *f)
+{
+	struct saa7146_fh *fh = __fh;
+	struct saa7146_dev *dev = fh->dev;
+	struct saa7146_vv *vv = dev->vv_data;
+	int err;
+
+	DEB_EE("V4L2_BUF_TYPE_VIDEO_OVERLAY: dev:%p, fh:%p\n", dev, fh);
+	err = vidioc_try_fmt_vid_overlay(file, fh, f);
+	if (0 != err)
+		return err;
+	vv->ov.win    = f->fmt.win;
+	vv->ov.nclips = f->fmt.win.clipcount;
+	if (vv->ov.nclips > 16)
+		vv->ov.nclips = 16;
+	if (copy_from_user(vv->ov.clips, f->fmt.win.clips,
+				sizeof(struct v4l2_clip) * vv->ov.nclips)) {
+		return -EFAULT;
+	}
+
+	/* vv->ov.fh is used to indicate that we have valid overlay informations, too */
+	vv->ov.fh = fh;
+
+	/* check if our current overlay is active */
+	if (IS_OVERLAY_ACTIVE(fh) != 0) {
+		saa7146_stop_preview(fh);
+		saa7146_start_preview(fh);
+	}
+	return 0;
+}
+
+static int vidioc_g_std(struct file *file, void *fh, v4l2_std_id *norm)
+{
+	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
+	struct saa7146_vv *vv = dev->vv_data;
+
+	*norm = vv->standard->id;
+	return 0;
+}
+
+	/* the saa7146 supfhrts (used in conjunction with the saa7111a for example)
+	   PAL / NTSC / SECAM. if your hardware does not (or does more)
+	   -- override this function in your extension */
+/*
+	case VIDIOC_ENUMSTD:
+	{
+		struct v4l2_standard *e = arg;
+		if (e->index < 0 )
+			return -EINVAL;
+		if( e->index < dev->ext_vv_data->num_stds ) {
+			DEB_EE("VIDIOC_ENUMSTD: index:%d\n", e->index);
+			v4l2_video_std_construct(e, dev->ext_vv_data->stds[e->index].id, dev->ext_vv_data->stds[e->index].name);
+			return 0;
+		}
+		return -EINVAL;
+	}
+	*/
+
+static int vidioc_s_std(struct file *file, void *fh, v4l2_std_id id)
+{
+	struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
+	struct saa7146_vv *vv = dev->vv_data;
+	int found = 0;
+	int err, i;
+
+	DEB_EE("VIDIOC_S_STD\n");
+
+	if ((vv->video_status & STATUS_CAPTURE) == STATUS_CAPTURE) {
+		DEB_D("cannot change video standard while streaming capture is active\n");
+		return -EBUSY;
+	}
+
+	if ((vv->video_status & STATUS_OVERLAY) != 0) {
+		vv->ov_suspend = vv->video_fh;
+		err = saa7146_stop_preview(vv->video_fh); /* side effect: video_status is now 0, video_fh is NULL */
+		if (0 != err) {
+			DEB_D("suspending video failed. aborting\n");
+			return err;
+		}
+	}
+
+	for (i = 0; i < dev->ext_vv_data->num_stds; i++)
+		if (id & dev->ext_vv_data->stds[i].id)
+			break;
+	if (i != dev->ext_vv_data->num_stds) {
+		vv->standard = &dev->ext_vv_data->stds[i];
+		if (NULL != dev->ext_vv_data->std_callback)
+			dev->ext_vv_data->std_callback(dev, vv->standard);
+		found = 1;
+	}
+
+	if (vv->ov_suspend != NULL) {
+		saa7146_start_preview(vv->ov_suspend);
+		vv->ov_suspend = NULL;
+	}
+
+	if (!found) {
+		DEB_EE("VIDIOC_S_STD: standard not found\n");
+		return -EINVAL;
+	}
+
+	DEB_EE("VIDIOC_S_STD: set to standard to '%s'\n", vv->standard->name);
+	return 0;
+}
+
+static int vidioc_overlay(struct file *file, void *fh, unsigned int on)
+{
+	int err;
+
+	DEB_D("VIDIOC_OVERLAY on:%d\n", on);
+	if (on)
+		err = saa7146_start_preview(fh);
+	else
+		err = saa7146_stop_preview(fh);
+	return err;
+}
+
+static int vidioc_reqbufs(struct file *file, void *__fh, struct v4l2_requestbuffers *b)
+{
+	struct saa7146_fh *fh = __fh;
+
+	if (b->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return videobuf_reqbufs(&fh->video_q, b);
+	if (b->type == V4L2_BUF_TYPE_VBI_CAPTURE)
+		return videobuf_reqbufs(&fh->vbi_q, b);
+	return -EINVAL;
+}
+
+static int vidioc_querybuf(struct file *file, void *__fh, struct v4l2_buffer *buf)
+{
+	struct saa7146_fh *fh = __fh;
+
+	if (buf->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return videobuf_querybuf(&fh->video_q, buf);
+	if (buf->type == V4L2_BUF_TYPE_VBI_CAPTURE)
+		return videobuf_querybuf(&fh->vbi_q, buf);
+	return -EINVAL;
+}
+
+static int vidioc_qbuf(struct file *file, void *__fh, struct v4l2_buffer *buf)
+{
+	struct saa7146_fh *fh = __fh;
+
+	if (buf->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return videobuf_qbuf(&fh->video_q, buf);
+	if (buf->type == V4L2_BUF_TYPE_VBI_CAPTURE)
+		return videobuf_qbuf(&fh->vbi_q, buf);
+	return -EINVAL;
+}
+
+static int vidioc_dqbuf(struct file *file, void *__fh, struct v4l2_buffer *buf)
+{
+	struct saa7146_fh *fh = __fh;
+
+	if (buf->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return videobuf_dqbuf(&fh->video_q, buf, file->f_flags & O_NONBLOCK);
+	if (buf->type == V4L2_BUF_TYPE_VBI_CAPTURE)
+		return videobuf_dqbuf(&fh->vbi_q, buf, file->f_flags & O_NONBLOCK);
+	return -EINVAL;
+}
+
+static int vidioc_streamon(struct file *file, void *__fh, enum v4l2_buf_type type)
+{
+	struct saa7146_fh *fh = __fh;
+	int err;
+
+	DEB_D("VIDIOC_STREAMON, type:%d\n", type);
+
+	err = video_begin(fh);
+	if (err)
+		return err;
+	if (type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return videobuf_streamon(&fh->video_q);
+	if (type == V4L2_BUF_TYPE_VBI_CAPTURE)
+		return videobuf_streamon(&fh->vbi_q);
+	return -EINVAL;
+}
+
+static int vidioc_streamoff(struct file *file, void *__fh, enum v4l2_buf_type type)
+{
+	struct saa7146_fh *fh = __fh;
+	struct saa7146_dev *dev = fh->dev;
+	struct saa7146_vv *vv = dev->vv_data;
+	int err;
+
+	DEB_D("VIDIOC_STREAMOFF, type:%d\n", type);
+
+	/* ugly: we need to copy some checks from video_end(),
+	   because videobuf_streamoff() relies on the capture running.
+	   check and fix this */
+	if ((vv->video_status & STATUS_CAPTURE) != STATUS_CAPTURE) {
+		DEB_S("not capturing\n");
+		return 0;
+	}
+
+	if (vv->video_fh != fh) {
+		DEB_S("capturing, but in another open\n");
+		return -EBUSY;
+	}
+
+	err = -EINVAL;
+	if (type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		err = videobuf_streamoff(&fh->video_q);
+	else if (type == V4L2_BUF_TYPE_VBI_CAPTURE)
+		err = videobuf_streamoff(&fh->vbi_q);
+	if (0 != err) {
+		DEB_D("warning: videobuf_streamoff() failed\n");
+		video_end(fh, file);
+	} else {
+		err = video_end(fh, file);
+	}
+	return err;
+}
+
+const struct v4l2_ioctl_ops saa7146_video_ioctl_ops = {
+	.vidioc_querycap             = vidioc_querycap,
+	.vidioc_enum_fmt_vid_cap     = vidioc_enum_fmt_vid_cap,
+	.vidioc_enum_fmt_vid_overlay = vidioc_enum_fmt_vid_cap,
+	.vidioc_g_fmt_vid_cap        = vidioc_g_fmt_vid_cap,
+	.vidioc_try_fmt_vid_cap      = vidioc_try_fmt_vid_cap,
+	.vidioc_s_fmt_vid_cap        = vidioc_s_fmt_vid_cap,
+	.vidioc_g_fmt_vid_overlay    = vidioc_g_fmt_vid_overlay,
+	.vidioc_try_fmt_vid_overlay  = vidioc_try_fmt_vid_overlay,
+	.vidioc_s_fmt_vid_overlay    = vidioc_s_fmt_vid_overlay,
+
+	.vidioc_overlay 	     = vidioc_overlay,
+	.vidioc_g_fbuf  	     = vidioc_g_fbuf,
+	.vidioc_s_fbuf  	     = vidioc_s_fbuf,
+	.vidioc_reqbufs              = vidioc_reqbufs,
+	.vidioc_querybuf             = vidioc_querybuf,
+	.vidioc_qbuf                 = vidioc_qbuf,
+	.vidioc_dqbuf                = vidioc_dqbuf,
+	.vidioc_g_std                = vidioc_g_std,
+	.vidioc_s_std                = vidioc_s_std,
+	.vidioc_streamon             = vidioc_streamon,
+	.vidioc_streamoff            = vidioc_streamoff,
+	.vidioc_g_parm 		     = vidioc_g_parm,
+	.vidioc_subscribe_event      = v4l2_ctrl_subscribe_event,
+	.vidioc_unsubscribe_event    = v4l2_event_unsubscribe,
+};
+
+const struct v4l2_ioctl_ops saa7146_vbi_ioctl_ops = {
+	.vidioc_querycap             = vidioc_querycap,
+	.vidioc_g_fmt_vbi_cap        = vidioc_g_fmt_vbi_cap,
+
+	.vidioc_reqbufs              = vidioc_reqbufs,
+	.vidioc_querybuf             = vidioc_querybuf,
+	.vidioc_qbuf                 = vidioc_qbuf,
+	.vidioc_dqbuf                = vidioc_dqbuf,
+	.vidioc_g_std                = vidioc_g_std,
+	.vidioc_s_std                = vidioc_s_std,
+	.vidioc_streamon             = vidioc_streamon,
+	.vidioc_streamoff            = vidioc_streamoff,
+	.vidioc_g_parm		     = vidioc_g_parm,
+	.vidioc_subscribe_event      = v4l2_ctrl_subscribe_event,
+	.vidioc_unsubscribe_event    = v4l2_event_unsubscribe,
+};
+
+/*********************************************************************************/
+/* buffer handling functions                                                  */
+
+static int buffer_activate (struct saa7146_dev *dev,
+		     struct saa7146_buf *buf,
+		     struct saa7146_buf *next)
+{
+	struct saa7146_vv *vv = dev->vv_data;
+
+	buf->vb.state = VIDEOBUF_ACTIVE;
+	saa7146_set_capture(dev,buf,next);
+
+	mod_timer(&vv->video_dmaq.timeout, jiffies+BUFFER_TIMEOUT);
+	return 0;
+}
+
+static void release_all_pagetables(struct saa7146_dev *dev, struct saa7146_buf *buf)
+{
+	saa7146_pgtable_free(dev->pci, &buf->pt[0]);
+	saa7146_pgtable_free(dev->pci, &buf->pt[1]);
+	saa7146_pgtable_free(dev->pci, &buf->pt[2]);
+}
+
+static int buffer_prepare(struct videobuf_queue *q,
+			  struct videobuf_buffer *vb, enum v4l2_field field)
+{
+	struct file *file = q->priv_data;
+	struct saa7146_fh *fh = file->private_data;
+	struct saa7146_dev *dev = fh->dev;
+	struct saa7146_vv *vv = dev->vv_data;
+	struct saa7146_buf *buf = (struct saa7146_buf *)vb;
+	int size,err = 0;
+
+	DEB_CAP("vbuf:%p\n", vb);
+
+	/* sanity checks */
+	if (vv->video_fmt.width  < 48 ||
+	    vv->video_fmt.height < 32 ||
+	    vv->video_fmt.width  > vv->standard->h_max_out ||
+	    vv->video_fmt.height > vv->standard->v_max_out) {
+		DEB_D("w (%d) / h (%d) out of bounds\n",
+		      vv->video_fmt.width, vv->video_fmt.height);
+		return -EINVAL;
+	}
+
+	size = vv->video_fmt.sizeimage;
+	if (0 != buf->vb.baddr && buf->vb.bsize < size) {
+		DEB_D("size mismatch\n");
+		return -EINVAL;
+	}
+
+	DEB_CAP("buffer_prepare [size=%dx%d,bytes=%d,fields=%s]\n",
+		vv->video_fmt.width, vv->video_fmt.height,
+		size, v4l2_field_names[vv->video_fmt.field]);
+	if (buf->vb.width  != vv->video_fmt.width  ||
+	    buf->vb.bytesperline != vv->video_fmt.bytesperline ||
+	    buf->vb.height != vv->video_fmt.height ||
+	    buf->vb.size   != size ||
+	    buf->vb.field  != field      ||
+	    buf->vb.field  != vv->video_fmt.field  ||
+	    buf->fmt       != &vv->video_fmt) {
+		saa7146_dma_free(dev,q,buf);
+	}
+
+	if (VIDEOBUF_NEEDS_INIT == buf->vb.state) {
+		struct saa7146_format *sfmt;
+
+		buf->vb.bytesperline  = vv->video_fmt.bytesperline;
+		buf->vb.width  = vv->video_fmt.width;
+		buf->vb.height = vv->video_fmt.height;
+		buf->vb.size   = size;
+		buf->vb.field  = field;
+		buf->fmt       = &vv->video_fmt;
+		buf->vb.field  = vv->video_fmt.field;
+
+		sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat);
+
+		release_all_pagetables(dev, buf);
+		if( 0 != IS_PLANAR(sfmt->trans)) {
+			saa7146_pgtable_alloc(dev->pci, &buf->pt[0]);
+			saa7146_pgtable_alloc(dev->pci, &buf->pt[1]);
+			saa7146_pgtable_alloc(dev->pci, &buf->pt[2]);
+		} else {
+			saa7146_pgtable_alloc(dev->pci, &buf->pt[0]);
+		}
+
+		err = videobuf_iolock(q,&buf->vb, &vv->ov_fb);
+		if (err)
+			goto oops;
+		err = saa7146_pgtable_build(dev,buf);
+		if (err)
+			goto oops;
+	}
+	buf->vb.state = VIDEOBUF_PREPARED;
+	buf->activate = buffer_activate;
+
+	return 0;
+
+ oops:
+	DEB_D("error out\n");
+	saa7146_dma_free(dev,q,buf);
+
+	return err;
+}
+
+static int buffer_setup(struct videobuf_queue *q, unsigned int *count, unsigned int *size)
+{
+	struct file *file = q->priv_data;
+	struct saa7146_fh *fh = file->private_data;
+	struct saa7146_vv *vv = fh->dev->vv_data;
+
+	if (0 == *count || *count > MAX_SAA7146_CAPTURE_BUFFERS)
+		*count = MAX_SAA7146_CAPTURE_BUFFERS;
+
+	*size = vv->video_fmt.sizeimage;
+
+	/* check if we exceed the "max_memory" parameter */
+	if( (*count * *size) > (max_memory*1048576) ) {
+		*count = (max_memory*1048576) / *size;
+	}
+
+	DEB_CAP("%d buffers, %d bytes each\n", *count, *size);
+
+	return 0;
+}
+
+static void buffer_queue(struct videobuf_queue *q, struct videobuf_buffer *vb)
+{
+	struct file *file = q->priv_data;
+	struct saa7146_fh *fh = file->private_data;
+	struct saa7146_dev *dev = fh->dev;
+	struct saa7146_vv *vv = dev->vv_data;
+	struct saa7146_buf *buf = (struct saa7146_buf *)vb;
+
+	DEB_CAP("vbuf:%p\n", vb);
+	saa7146_buffer_queue(fh->dev, &vv->video_dmaq, buf);
+}
+
+static void buffer_release(struct videobuf_queue *q, struct videobuf_buffer *vb)
+{
+	struct file *file = q->priv_data;
+	struct saa7146_fh *fh = file->private_data;
+	struct saa7146_dev *dev = fh->dev;
+	struct saa7146_buf *buf = (struct saa7146_buf *)vb;
+
+	DEB_CAP("vbuf:%p\n", vb);
+
+	saa7146_dma_free(dev,q,buf);
+
+	release_all_pagetables(dev, buf);
+}
+
+static struct videobuf_queue_ops video_qops = {
+	.buf_setup    = buffer_setup,
+	.buf_prepare  = buffer_prepare,
+	.buf_queue    = buffer_queue,
+	.buf_release  = buffer_release,
+};
+
+/********************************************************************************/
+/* file operations */
+
+static void video_init(struct saa7146_dev *dev, struct saa7146_vv *vv)
+{
+	INIT_LIST_HEAD(&vv->video_dmaq.queue);
+
+	init_timer(&vv->video_dmaq.timeout);
+	vv->video_dmaq.timeout.function = saa7146_buffer_timeout;
+	vv->video_dmaq.timeout.data     = (unsigned long)(&vv->video_dmaq);
+	vv->video_dmaq.dev              = dev;
+
+	/* set some default values */
+	vv->standard = &dev->ext_vv_data->stds[0];
+
+	/* FIXME: what's this? */
+	vv->current_hps_source = SAA7146_HPS_SOURCE_PORT_A;
+	vv->current_hps_sync = SAA7146_HPS_SYNC_PORT_A;
+}
+
+
+static int video_open(struct saa7146_dev *dev, struct file *file)
+{
+	struct saa7146_fh *fh = file->private_data;
+
+	videobuf_queue_sg_init(&fh->video_q, &video_qops,
+			    &dev->pci->dev, &dev->slock,
+			    V4L2_BUF_TYPE_VIDEO_CAPTURE,
+			    V4L2_FIELD_INTERLACED,
+			    sizeof(struct saa7146_buf),
+			    file, &dev->v4l2_lock);
+
+	return 0;
+}
+
+
+static void video_close(struct saa7146_dev *dev, struct file *file)
+{
+	struct saa7146_fh *fh = file->private_data;
+	struct saa7146_vv *vv = dev->vv_data;
+	struct videobuf_queue *q = &fh->video_q;
+
+	if (IS_CAPTURE_ACTIVE(fh) != 0)
+		video_end(fh, file);
+	else if (IS_OVERLAY_ACTIVE(fh) != 0)
+		saa7146_stop_preview(fh);
+
+	videobuf_stop(q);
+	/* hmm, why is this function declared void? */
+}
+
+
+static void video_irq_done(struct saa7146_dev *dev, unsigned long st)
+{
+	struct saa7146_vv *vv = dev->vv_data;
+	struct saa7146_dmaqueue *q = &vv->video_dmaq;
+
+	spin_lock(&dev->slock);
+	DEB_CAP("called\n");
+
+	/* only finish the buffer if we have one... */
+	if( NULL != q->curr ) {
+		saa7146_buffer_finish(dev,q,VIDEOBUF_DONE);
+	}
+	saa7146_buffer_next(dev,q,0);
+
+	spin_unlock(&dev->slock);
+}
+
+static ssize_t video_read(struct file *file, char __user *data, size_t count, loff_t *ppos)
+{
+	struct saa7146_fh *fh = file->private_data;
+	struct saa7146_dev *dev = fh->dev;
+	struct saa7146_vv *vv = dev->vv_data;
+	ssize_t ret = 0;
+
+	DEB_EE("called\n");
+
+	if ((vv->video_status & STATUS_CAPTURE) != 0) {
+		/* fixme: should we allow read() captures while streaming capture? */
+		if (vv->video_fh == fh) {
+			DEB_S("already capturing\n");
+			return -EBUSY;
+		}
+		DEB_S("already capturing in another open\n");
+		return -EBUSY;
+	}
+
+	ret = video_begin(fh);
+	if( 0 != ret) {
+		goto out;
+	}
+
+	ret = videobuf_read_one(&fh->video_q , data, count, ppos,
+				file->f_flags & O_NONBLOCK);
+	if (ret != 0) {
+		video_end(fh, file);
+	} else {
+		ret = video_end(fh, file);
+	}
+out:
+	/* restart overlay if it was active before */
+	if (vv->ov_suspend != NULL) {
+		saa7146_start_preview(vv->ov_suspend);
+		vv->ov_suspend = NULL;
+	}
+
+	return ret;
+}
+
+struct saa7146_use_ops saa7146_video_uops = {
+	.init = video_init,
+	.open = video_open,
+	.release = video_close,
+	.irq_done = video_irq_done,
+	.read = video_read,
+};