Initial import

23 files changed, 16479 insertions, 0 deletions

diff --git a/drivers/media/platform/davinci/Kconfig b/drivers/media/platform/davinci/Kconfig
new file mode 100644
index 000000000..469e9d28c
--- /dev/null
+++ b/drivers/media/platform/davinci/Kconfig
@@ -0,0 +1,88 @@
+config VIDEO_DAVINCI_VPIF_DISPLAY
+	tristate "TI DaVinci VPIF V4L2-Display driver"
+	depends on VIDEO_V4L2
+	depends on ARCH_DAVINCI || COMPILE_TEST
+	depends on HAS_DMA
+	select VIDEOBUF2_DMA_CONTIG
+	select VIDEO_ADV7343 if MEDIA_SUBDRV_AUTOSELECT
+	select VIDEO_THS7303 if MEDIA_SUBDRV_AUTOSELECT
+	help
+	  Enables Davinci VPIF module used for display devices.
+	  This module is used for display on TI DM6467/DA850/OMAPL138
+	  SoCs.
+
+	  To compile this driver as a module, choose M here. There will
+	  be two modules called vpif.ko and vpif_display.ko
+
+config VIDEO_DAVINCI_VPIF_CAPTURE
+	tristate "TI DaVinci VPIF video capture driver"
+	depends on VIDEO_V4L2
+	depends on ARCH_DAVINCI || COMPILE_TEST
+	depends on HAS_DMA
+	select VIDEOBUF2_DMA_CONTIG
+	help
+	  Enables Davinci VPIF module used for capture devices.
+	  This module is used for capture on TI DM6467/DA850/OMAPL138
+	  SoCs.
+
+	  To compile this driver as a module, choose M here. There will
+	  be two modules called vpif.ko and vpif_capture.ko
+
+config VIDEO_DM6446_CCDC
+	tristate "TI DM6446 CCDC video capture driver"
+	depends on VIDEO_V4L2
+	depends on ARCH_DAVINCI || COMPILE_TEST
+	depends on HAS_DMA
+	select VIDEOBUF_DMA_CONTIG
+	help
+	   Enables DaVinci CCD hw module. DaVinci CCDC hw interfaces
+	   with decoder modules such as TVP5146 over BT656 or
+	   sensor module such as MT9T001 over a raw interface. This
+	   module configures the interface and CCDC/ISIF to do
+	   video frame capture from slave decoders.
+
+	   To compile this driver as a module, choose M here. There will
+	   be three modules called vpfe_capture.ko, vpss.ko and dm644x_ccdc.ko
+
+config VIDEO_DM355_CCDC
+	tristate "TI DM355 CCDC video capture driver"
+	depends on VIDEO_V4L2
+	depends on ARCH_DAVINCI || COMPILE_TEST
+	depends on HAS_DMA
+	select VIDEOBUF_DMA_CONTIG
+	help
+	   Enables DM355 CCD hw module. DM355 CCDC hw interfaces
+	   with decoder modules such as TVP5146 over BT656 or
+	   sensor module such as MT9T001 over a raw interface. This
+	   module configures the interface and CCDC/ISIF to do
+	   video frame capture from a slave decoders
+
+	   To compile this driver as a module, choose M here. There will
+	   be three modules called vpfe_capture.ko, vpss.ko and dm355_ccdc.ko
+
+config VIDEO_DM365_ISIF
+	tristate "TI DM365 ISIF video capture driver"
+	depends on VIDEO_V4L2 && ARCH_DAVINCI
+	depends on HAS_DMA
+	select VIDEOBUF_DMA_CONTIG
+	help
+	   Enables ISIF hw module. This is the hardware module for
+	   configuring ISIF in VPFE to capture Raw Bayer RGB data from
+	   a image sensor or YUV data from a YUV source.
+
+	   To compile this driver as a module, choose M here. There will
+	   be three modules called vpfe_capture.ko, vpss.ko and isif.ko
+
+config VIDEO_DAVINCI_VPBE_DISPLAY
+	tristate "TI DaVinci VPBE V4L2-Display driver"
+	depends on VIDEO_V4L2 && ARCH_DAVINCI
+	depends on HAS_DMA
+	select VIDEOBUF2_DMA_CONTIG
+	help
+	    Enables Davinci VPBE module used for display devices.
+	    This module is used for display on TI DM644x/DM365/DM355
+	    based display devices.
+
+	    To compile this driver as a module, choose M here. There will
+	    be five modules created called vpss.ko, vpbe.ko, vpbe_osd.ko,
+	    vpbe_venc.ko and vpbe_display.ko
diff --git a/drivers/media/platform/davinci/Makefile b/drivers/media/platform/davinci/Makefile
new file mode 100644
index 000000000..d74d9eeb0
--- /dev/null
+++ b/drivers/media/platform/davinci/Makefile
@@ -0,0 +1,15 @@
+#
+# Makefile for the davinci video device drivers.
+#
+
+#VPIF Display driver
+obj-$(CONFIG_VIDEO_DAVINCI_VPIF_DISPLAY) += vpif.o vpif_display.o
+#VPIF Capture driver
+obj-$(CONFIG_VIDEO_DAVINCI_VPIF_CAPTURE) += vpif.o vpif_capture.o
+
+# Capture: DM6446 and DM355
+obj-$(CONFIG_VIDEO_DM6446_CCDC) += vpfe_capture.o vpss.o dm644x_ccdc.o
+obj-$(CONFIG_VIDEO_DM355_CCDC) += vpfe_capture.o vpss.o dm355_ccdc.o
+obj-$(CONFIG_VIDEO_DM365_ISIF) += vpfe_capture.o vpss.o isif.o
+obj-$(CONFIG_VIDEO_DAVINCI_VPBE_DISPLAY) += vpss.o vpbe.o vpbe_osd.o \
+	vpbe_venc.o vpbe_display.o
diff --git a/drivers/media/platform/davinci/ccdc_hw_device.h b/drivers/media/platform/davinci/ccdc_hw_device.h
new file mode 100644
index 000000000..86b9b3518
--- /dev/null
+++ b/drivers/media/platform/davinci/ccdc_hw_device.h
@@ -0,0 +1,110 @@
+/*
+ * Copyright (C) 2008-2009 Texas Instruments Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ * ccdc device API
+ */
+#ifndef _CCDC_HW_DEVICE_H
+#define _CCDC_HW_DEVICE_H
+
+#ifdef __KERNEL__
+#include <linux/videodev2.h>
+#include <linux/device.h>
+#include <media/davinci/vpfe_types.h>
+#include <media/davinci/ccdc_types.h>
+
+/*
+ * ccdc hw operations
+ */
+struct ccdc_hw_ops {
+	/* Pointer to initialize function to initialize ccdc device */
+	int (*open) (struct device *dev);
+	/* Pointer to deinitialize function */
+	int (*close) (struct device *dev);
+	/* set ccdc base address */
+	void (*set_ccdc_base)(void *base, int size);
+	/* Pointer to function to enable or disable ccdc */
+	void (*enable) (int en);
+	/* reset sbl. only for 6446 */
+	void (*reset) (void);
+	/* enable output to sdram */
+	void (*enable_out_to_sdram) (int en);
+	/* Pointer to function to set hw parameters */
+	int (*set_hw_if_params) (struct vpfe_hw_if_param *param);
+	/* get interface parameters */
+	int (*get_hw_if_params) (struct vpfe_hw_if_param *param);
+	/*
+	 * Pointer to function to set parameters. Used
+	 * for implementing VPFE_S_CCDC_PARAMS
+	 */
+	int (*set_params) (void *params);
+	/*
+	 * Pointer to function to get parameter. Used
+	 * for implementing VPFE_G_CCDC_PARAMS
+	 */
+	int (*get_params) (void *params);
+	/* Pointer to function to configure ccdc */
+	int (*configure) (void);
+
+	/* Pointer to function to set buffer type */
+	int (*set_buftype) (enum ccdc_buftype buf_type);
+	/* Pointer to function to get buffer type */
+	enum ccdc_buftype (*get_buftype) (void);
+	/* Pointer to function to set frame format */
+	int (*set_frame_format) (enum ccdc_frmfmt frm_fmt);
+	/* Pointer to function to get frame format */
+	enum ccdc_frmfmt (*get_frame_format) (void);
+	/* enumerate hw pix formats */
+	int (*enum_pix)(u32 *hw_pix, int i);
+	/* Pointer to function to set buffer type */
+	u32 (*get_pixel_format) (void);
+	/* Pointer to function to get pixel format. */
+	int (*set_pixel_format) (u32 pixfmt);
+	/* Pointer to function to set image window */
+	int (*set_image_window) (struct v4l2_rect *win);
+	/* Pointer to function to set image window */
+	void (*get_image_window) (struct v4l2_rect *win);
+	/* Pointer to function to get line length */
+	unsigned int (*get_line_length) (void);
+
+	/* Query CCDC control IDs */
+	int (*queryctrl)(struct v4l2_queryctrl *qctrl);
+	/* Set CCDC control */
+	int (*set_control)(struct v4l2_control *ctrl);
+	/* Get CCDC control */
+	int (*get_control)(struct v4l2_control *ctrl);
+
+	/* Pointer to function to set frame buffer address */
+	void (*setfbaddr) (unsigned long addr);
+	/* Pointer to function to get field id */
+	int (*getfid) (void);
+};
+
+struct ccdc_hw_device {
+	/* ccdc device name */
+	char name[32];
+	/* module owner */
+	struct module *owner;
+	/* hw ops */
+	struct ccdc_hw_ops hw_ops;
+};
+
+/* Used by CCDC module to register & unregister with vpfe capture driver */
+int vpfe_register_ccdc_device(struct ccdc_hw_device *dev);
+void vpfe_unregister_ccdc_device(struct ccdc_hw_device *dev);
+
+#endif
+#endif
diff --git a/drivers/media/platform/davinci/dm355_ccdc.c b/drivers/media/platform/davinci/dm355_ccdc.c
new file mode 100644
index 000000000..c90b9a4f0
--- /dev/null
+++ b/drivers/media/platform/davinci/dm355_ccdc.c
@@ -0,0 +1,1038 @@
+/*
+ * Copyright (C) 2005-2009 Texas Instruments Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ * CCDC hardware module for DM355
+ * ------------------------------
+ *
+ * This module is for configuring DM355 CCD controller of VPFE to capture
+ * Raw yuv or Bayer RGB data from a decoder. CCDC has several modules
+ * such as Defect Pixel Correction, Color Space Conversion etc to
+ * pre-process the Bayer RGB data, before writing it to SDRAM. This
+ * module also allows application to configure individual
+ * module parameters through VPFE_CMD_S_CCDC_RAW_PARAMS IOCTL.
+ * To do so, application include dm355_ccdc.h and vpfe_capture.h header
+ * files. The setparams() API is called by vpfe_capture driver
+ * to configure module parameters
+ *
+ * TODO: 1) Raw bayer parameter settings and bayer capture
+ * 	 2) Split module parameter structure to module specific ioctl structs
+ *	 3) add support for lense shading correction
+ *	 4) investigate if enum used for user space type definition
+ * 	    to be replaced by #defines or integer
+ */
+#include <linux/platform_device.h>
+#include <linux/uaccess.h>
+#include <linux/videodev2.h>
+#include <linux/err.h>
+#include <linux/module.h>
+
+#include <media/davinci/dm355_ccdc.h>
+#include <media/davinci/vpss.h>
+
+#include "dm355_ccdc_regs.h"
+#include "ccdc_hw_device.h"
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("CCDC Driver for DM355");
+MODULE_AUTHOR("Texas Instruments");
+
+static struct ccdc_oper_config {
+	struct device *dev;
+	/* CCDC interface type */
+	enum vpfe_hw_if_type if_type;
+	/* Raw Bayer configuration */
+	struct ccdc_params_raw bayer;
+	/* YCbCr configuration */
+	struct ccdc_params_ycbcr ycbcr;
+	/* ccdc base address */
+	void __iomem *base_addr;
+} ccdc_cfg = {
+	/* Raw configurations */
+	.bayer = {
+		.pix_fmt = CCDC_PIXFMT_RAW,
+		.frm_fmt = CCDC_FRMFMT_PROGRESSIVE,
+		.win = CCDC_WIN_VGA,
+		.fid_pol = VPFE_PINPOL_POSITIVE,
+		.vd_pol = VPFE_PINPOL_POSITIVE,
+		.hd_pol = VPFE_PINPOL_POSITIVE,
+		.gain = {
+			.r_ye = 256,
+			.gb_g = 256,
+			.gr_cy = 256,
+			.b_mg = 256
+		},
+		.config_params = {
+			.datasft = 2,
+			.mfilt1 = CCDC_NO_MEDIAN_FILTER1,
+			.mfilt2 = CCDC_NO_MEDIAN_FILTER2,
+			.alaw = {
+				.gamma_wd = 2,
+			},
+			.blk_clamp = {
+				.sample_pixel = 1,
+				.dc_sub = 25
+			},
+			.col_pat_field0 = {
+				.olop = CCDC_GREEN_BLUE,
+				.olep = CCDC_BLUE,
+				.elop = CCDC_RED,
+				.elep = CCDC_GREEN_RED
+			},
+			.col_pat_field1 = {
+				.olop = CCDC_GREEN_BLUE,
+				.olep = CCDC_BLUE,
+				.elop = CCDC_RED,
+				.elep = CCDC_GREEN_RED
+			},
+		},
+	},
+	/* YCbCr configuration */
+	.ycbcr = {
+		.win = CCDC_WIN_PAL,
+		.pix_fmt = CCDC_PIXFMT_YCBCR_8BIT,
+		.frm_fmt = CCDC_FRMFMT_INTERLACED,
+		.fid_pol = VPFE_PINPOL_POSITIVE,
+		.vd_pol = VPFE_PINPOL_POSITIVE,
+		.hd_pol = VPFE_PINPOL_POSITIVE,
+		.bt656_enable = 1,
+		.pix_order = CCDC_PIXORDER_CBYCRY,
+		.buf_type = CCDC_BUFTYPE_FLD_INTERLEAVED
+	},
+};
+
+
+/* Raw Bayer formats */
+static u32 ccdc_raw_bayer_pix_formats[] =
+		{V4L2_PIX_FMT_SBGGR8, V4L2_PIX_FMT_SBGGR16};
+
+/* Raw YUV formats */
+static u32 ccdc_raw_yuv_pix_formats[] =
+		{V4L2_PIX_FMT_UYVY, V4L2_PIX_FMT_YUYV};
+
+/* register access routines */
+static inline u32 regr(u32 offset)
+{
+	return __raw_readl(ccdc_cfg.base_addr + offset);
+}
+
+static inline void regw(u32 val, u32 offset)
+{
+	__raw_writel(val, ccdc_cfg.base_addr + offset);
+}
+
+static void ccdc_enable(int en)
+{
+	unsigned int temp;
+	temp = regr(SYNCEN);
+	temp &= (~CCDC_SYNCEN_VDHDEN_MASK);
+	temp |= (en & CCDC_SYNCEN_VDHDEN_MASK);
+	regw(temp, SYNCEN);
+}
+
+static void ccdc_enable_output_to_sdram(int en)
+{
+	unsigned int temp;
+	temp = regr(SYNCEN);
+	temp &= (~(CCDC_SYNCEN_WEN_MASK));
+	temp |= ((en << CCDC_SYNCEN_WEN_SHIFT) & CCDC_SYNCEN_WEN_MASK);
+	regw(temp, SYNCEN);
+}
+
+static void ccdc_config_gain_offset(void)
+{
+	/* configure gain */
+	regw(ccdc_cfg.bayer.gain.r_ye, RYEGAIN);
+	regw(ccdc_cfg.bayer.gain.gr_cy, GRCYGAIN);
+	regw(ccdc_cfg.bayer.gain.gb_g, GBGGAIN);
+	regw(ccdc_cfg.bayer.gain.b_mg, BMGGAIN);
+	/* configure offset */
+	regw(ccdc_cfg.bayer.ccdc_offset, OFFSET);
+}
+
+/*
+ * ccdc_restore_defaults()
+ * This function restore power on defaults in the ccdc registers
+ */
+static int ccdc_restore_defaults(void)
+{
+	int i;
+
+	dev_dbg(ccdc_cfg.dev, "\nstarting ccdc_restore_defaults...");
+	/* set all registers to zero */
+	for (i = 0; i <= CCDC_REG_LAST; i += 4)
+		regw(0, i);
+
+	/* now override the values with power on defaults in registers */
+	regw(MODESET_DEFAULT, MODESET);
+	/* no culling support */
+	regw(CULH_DEFAULT, CULH);
+	regw(CULV_DEFAULT, CULV);
+	/* Set default Gain and Offset */
+	ccdc_cfg.bayer.gain.r_ye = GAIN_DEFAULT;
+	ccdc_cfg.bayer.gain.gb_g = GAIN_DEFAULT;
+	ccdc_cfg.bayer.gain.gr_cy = GAIN_DEFAULT;
+	ccdc_cfg.bayer.gain.b_mg = GAIN_DEFAULT;
+	ccdc_config_gain_offset();
+	regw(OUTCLIP_DEFAULT, OUTCLIP);
+	regw(LSCCFG2_DEFAULT, LSCCFG2);
+	/* select ccdc input */
+	if (vpss_select_ccdc_source(VPSS_CCDCIN)) {
+		dev_dbg(ccdc_cfg.dev, "\ncouldn't select ccdc input source");
+		return -EFAULT;
+	}
+	/* select ccdc clock */
+	if (vpss_enable_clock(VPSS_CCDC_CLOCK, 1) < 0) {
+		dev_dbg(ccdc_cfg.dev, "\ncouldn't enable ccdc clock");
+		return -EFAULT;
+	}
+	dev_dbg(ccdc_cfg.dev, "\nEnd of ccdc_restore_defaults...");
+	return 0;
+}
+
+static int ccdc_open(struct device *device)
+{
+	return ccdc_restore_defaults();
+}
+
+static int ccdc_close(struct device *device)
+{
+	/* disable clock */
+	vpss_enable_clock(VPSS_CCDC_CLOCK, 0);
+	/* do nothing for now */
+	return 0;
+}
+/*
+ * ccdc_setwin()
+ * This function will configure the window size to
+ * be capture in CCDC reg.
+ */
+static void ccdc_setwin(struct v4l2_rect *image_win,
+			enum ccdc_frmfmt frm_fmt, int ppc)
+{
+	int horz_start, horz_nr_pixels;
+	int vert_start, vert_nr_lines;
+	int mid_img = 0;
+
+	dev_dbg(ccdc_cfg.dev, "\nStarting ccdc_setwin...");
+
+	/*
+	 * ppc - per pixel count. indicates how many pixels per cell
+	 * output to SDRAM. example, for ycbcr, it is one y and one c, so 2.
+	 * raw capture this is 1
+	 */
+	horz_start = image_win->left << (ppc - 1);
+	horz_nr_pixels = ((image_win->width) << (ppc - 1)) - 1;
+
+	/* Writing the horizontal info into the registers */
+	regw(horz_start, SPH);
+	regw(horz_nr_pixels, NPH);
+	vert_start = image_win->top;
+
+	if (frm_fmt == CCDC_FRMFMT_INTERLACED) {
+		vert_nr_lines = (image_win->height >> 1) - 1;
+		vert_start >>= 1;
+		/* Since first line doesn't have any data */
+		vert_start += 1;
+		/* configure VDINT0 and VDINT1 */
+		regw(vert_start, VDINT0);
+	} else {
+		/* Since first line doesn't have any data */
+		vert_start += 1;
+		vert_nr_lines = image_win->height - 1;
+		/* configure VDINT0 and VDINT1 */
+		mid_img = vert_start + (image_win->height / 2);
+		regw(vert_start, VDINT0);
+		regw(mid_img, VDINT1);
+	}
+	regw(vert_start & CCDC_START_VER_ONE_MASK, SLV0);
+	regw(vert_start & CCDC_START_VER_TWO_MASK, SLV1);
+	regw(vert_nr_lines & CCDC_NUM_LINES_VER, NLV);
+	dev_dbg(ccdc_cfg.dev, "\nEnd of ccdc_setwin...");
+}
+
+static int validate_ccdc_param(struct ccdc_config_params_raw *ccdcparam)
+{
+	if (ccdcparam->datasft < CCDC_DATA_NO_SHIFT ||
+	    ccdcparam->datasft > CCDC_DATA_SHIFT_6BIT) {
+		dev_dbg(ccdc_cfg.dev, "Invalid value of data shift\n");
+		return -EINVAL;
+	}
+
+	if (ccdcparam->mfilt1 < CCDC_NO_MEDIAN_FILTER1 ||
+	    ccdcparam->mfilt1 > CCDC_MEDIAN_FILTER1) {
+		dev_dbg(ccdc_cfg.dev, "Invalid value of median filter1\n");
+		return -EINVAL;
+	}
+
+	if (ccdcparam->mfilt2 < CCDC_NO_MEDIAN_FILTER2 ||
+	    ccdcparam->mfilt2 > CCDC_MEDIAN_FILTER2) {
+		dev_dbg(ccdc_cfg.dev, "Invalid value of median filter2\n");
+		return -EINVAL;
+	}
+
+	if ((ccdcparam->med_filt_thres < 0) ||
+	   (ccdcparam->med_filt_thres > CCDC_MED_FILT_THRESH)) {
+		dev_dbg(ccdc_cfg.dev,
+			"Invalid value of median filter threshold\n");
+		return -EINVAL;
+	}
+
+	if (ccdcparam->data_sz < CCDC_DATA_16BITS ||
+	    ccdcparam->data_sz > CCDC_DATA_8BITS) {
+		dev_dbg(ccdc_cfg.dev, "Invalid value of data size\n");
+		return -EINVAL;
+	}
+
+	if (ccdcparam->alaw.enable) {
+		if (ccdcparam->alaw.gamma_wd < CCDC_GAMMA_BITS_13_4 ||
+		    ccdcparam->alaw.gamma_wd > CCDC_GAMMA_BITS_09_0) {
+			dev_dbg(ccdc_cfg.dev, "Invalid value of ALAW\n");
+			return -EINVAL;
+		}
+	}
+
+	if (ccdcparam->blk_clamp.b_clamp_enable) {
+		if (ccdcparam->blk_clamp.sample_pixel < CCDC_SAMPLE_1PIXELS ||
+		    ccdcparam->blk_clamp.sample_pixel > CCDC_SAMPLE_16PIXELS) {
+			dev_dbg(ccdc_cfg.dev,
+				"Invalid value of sample pixel\n");
+			return -EINVAL;
+		}
+		if (ccdcparam->blk_clamp.sample_ln < CCDC_SAMPLE_1LINES ||
+		    ccdcparam->blk_clamp.sample_ln > CCDC_SAMPLE_16LINES) {
+			dev_dbg(ccdc_cfg.dev,
+				"Invalid value of sample lines\n");
+			return -EINVAL;
+		}
+	}
+	return 0;
+}
+
+/* Parameter operations */
+static int ccdc_set_params(void __user *params)
+{
+	struct ccdc_config_params_raw ccdc_raw_params;
+	int x;
+
+	/* only raw module parameters can be set through the IOCTL */
+	if (ccdc_cfg.if_type != VPFE_RAW_BAYER)
+		return -EINVAL;
+
+	x = copy_from_user(&ccdc_raw_params, params, sizeof(ccdc_raw_params));
+	if (x) {
+		dev_dbg(ccdc_cfg.dev, "ccdc_set_params: error in copying ccdc"
+			"params, %d\n", x);
+		return -EFAULT;
+	}
+
+	if (!validate_ccdc_param(&ccdc_raw_params)) {
+		memcpy(&ccdc_cfg.bayer.config_params,
+			&ccdc_raw_params,
+			sizeof(ccdc_raw_params));
+		return 0;
+	}
+	return -EINVAL;
+}
+
+/* This function will configure CCDC for YCbCr video capture */
+static void ccdc_config_ycbcr(void)
+{
+	struct ccdc_params_ycbcr *params = &ccdc_cfg.ycbcr;
+	u32 temp;
+
+	/* first set the CCDC power on defaults values in all registers */
+	dev_dbg(ccdc_cfg.dev, "\nStarting ccdc_config_ycbcr...");
+	ccdc_restore_defaults();
+
+	/* configure pixel format & video frame format */
+	temp = (((params->pix_fmt & CCDC_INPUT_MODE_MASK) <<
+		CCDC_INPUT_MODE_SHIFT) |
+		((params->frm_fmt & CCDC_FRM_FMT_MASK) <<
+		CCDC_FRM_FMT_SHIFT));
+
+	/* setup BT.656 sync mode */
+	if (params->bt656_enable) {
+		regw(CCDC_REC656IF_BT656_EN, REC656IF);
+		/*
+		 * configure the FID, VD, HD pin polarity fld,hd pol positive,
+		 * vd negative, 8-bit pack mode
+		 */
+		temp |= CCDC_VD_POL_NEGATIVE;
+	} else {		/* y/c external sync mode */
+		temp |= (((params->fid_pol & CCDC_FID_POL_MASK) <<
+			CCDC_FID_POL_SHIFT) |
+			((params->hd_pol & CCDC_HD_POL_MASK) <<
+			CCDC_HD_POL_SHIFT) |
+			((params->vd_pol & CCDC_VD_POL_MASK) <<
+			CCDC_VD_POL_SHIFT));
+	}
+
+	/* pack the data to 8-bit */
+	temp |= CCDC_DATA_PACK_ENABLE;
+
+	regw(temp, MODESET);
+
+	/* configure video window */
+	ccdc_setwin(&params->win, params->frm_fmt, 2);
+
+	/* configure the order of y cb cr in SD-RAM */
+	temp = (params->pix_order << CCDC_Y8POS_SHIFT);
+	temp |= CCDC_LATCH_ON_VSYNC_DISABLE | CCDC_CCDCFG_FIDMD_NO_LATCH_VSYNC;
+	regw(temp, CCDCFG);
+
+	/*
+	 * configure the horizontal line offset. This is done by rounding up
+	 * width to a multiple of 16 pixels and multiply by two to account for
+	 * y:cb:cr 4:2:2 data
+	 */
+	regw(((params->win.width * 2 + 31) >> 5), HSIZE);
+
+	/* configure the memory line offset */
+	if (params->buf_type == CCDC_BUFTYPE_FLD_INTERLEAVED) {
+		/* two fields are interleaved in memory */
+		regw(CCDC_SDOFST_FIELD_INTERLEAVED, SDOFST);
+	}
+
+	dev_dbg(ccdc_cfg.dev, "\nEnd of ccdc_config_ycbcr...\n");
+}
+
+/*
+ * ccdc_config_black_clamp()
+ * configure parameters for Optical Black Clamp
+ */
+static void ccdc_config_black_clamp(struct ccdc_black_clamp *bclamp)
+{
+	u32 val;
+
+	if (!bclamp->b_clamp_enable) {
+		/* configure DCSub */
+		regw(bclamp->dc_sub & CCDC_BLK_DC_SUB_MASK, DCSUB);
+		regw(0x0000, CLAMP);
+		return;
+	}
+	/* Enable the Black clamping, set sample lines and pixels */
+	val = (bclamp->start_pixel & CCDC_BLK_ST_PXL_MASK) |
+	      ((bclamp->sample_pixel & CCDC_BLK_SAMPLE_LN_MASK) <<
+		CCDC_BLK_SAMPLE_LN_SHIFT) | CCDC_BLK_CLAMP_ENABLE;
+	regw(val, CLAMP);
+
+	/* If Black clamping is enable then make dcsub 0 */
+	val = (bclamp->sample_ln & CCDC_NUM_LINE_CALC_MASK)
+			<< CCDC_NUM_LINE_CALC_SHIFT;
+	regw(val, DCSUB);
+}
+
+/*
+ * ccdc_config_black_compense()
+ * configure parameters for Black Compensation
+ */
+static void ccdc_config_black_compense(struct ccdc_black_compensation *bcomp)
+{
+	u32 val;
+
+	val = (bcomp->b & CCDC_BLK_COMP_MASK) |
+		((bcomp->gb & CCDC_BLK_COMP_MASK) <<
+		CCDC_BLK_COMP_GB_COMP_SHIFT);
+	regw(val, BLKCMP1);
+
+	val = ((bcomp->gr & CCDC_BLK_COMP_MASK) <<
+		CCDC_BLK_COMP_GR_COMP_SHIFT) |
+		((bcomp->r & CCDC_BLK_COMP_MASK) <<
+		CCDC_BLK_COMP_R_COMP_SHIFT);
+	regw(val, BLKCMP0);
+}
+
+/*
+ * ccdc_write_dfc_entry()
+ * write an entry in the dfc table.
+ */
+static int ccdc_write_dfc_entry(int index, struct ccdc_vertical_dft *dfc)
+{
+/* TODO This is to be re-visited and adjusted */
+#define DFC_WRITE_WAIT_COUNT	1000
+	u32 val, count = DFC_WRITE_WAIT_COUNT;
+
+	regw(dfc->dft_corr_vert[index], DFCMEM0);
+	regw(dfc->dft_corr_horz[index], DFCMEM1);
+	regw(dfc->dft_corr_sub1[index], DFCMEM2);
+	regw(dfc->dft_corr_sub2[index], DFCMEM3);
+	regw(dfc->dft_corr_sub3[index], DFCMEM4);
+	/* set WR bit to write */
+	val = regr(DFCMEMCTL) | CCDC_DFCMEMCTL_DFCMWR_MASK;
+	regw(val, DFCMEMCTL);
+
+	/*
+	 * Assume, it is very short. If we get an error, we need to
+	 * adjust this value
+	 */
+	while (regr(DFCMEMCTL) & CCDC_DFCMEMCTL_DFCMWR_MASK)
+		count--;
+	/*
+	 * TODO We expect the count to be non-zero to be successful. Adjust
+	 * the count if write requires more time
+	 */
+
+	if (count) {
+		dev_err(ccdc_cfg.dev, "defect table write timeout !!!\n");
+		return -1;
+	}
+	return 0;
+}
+
+/*
+ * ccdc_config_vdfc()
+ * configure parameters for Vertical Defect Correction
+ */
+static int ccdc_config_vdfc(struct ccdc_vertical_dft *dfc)
+{
+	u32 val;
+	int i;
+
+	/* Configure General Defect Correction. The table used is from IPIPE */
+	val = dfc->gen_dft_en & CCDC_DFCCTL_GDFCEN_MASK;
+
+	/* Configure Vertical Defect Correction if needed */
+	if (!dfc->ver_dft_en) {
+		/* Enable only General Defect Correction */
+		regw(val, DFCCTL);
+		return 0;
+	}
+
+	if (dfc->table_size > CCDC_DFT_TABLE_SIZE)
+		return -EINVAL;
+
+	val |= CCDC_DFCCTL_VDFC_DISABLE;
+	val |= (dfc->dft_corr_ctl.vdfcsl & CCDC_DFCCTL_VDFCSL_MASK) <<
+		CCDC_DFCCTL_VDFCSL_SHIFT;
+	val |= (dfc->dft_corr_ctl.vdfcuda & CCDC_DFCCTL_VDFCUDA_MASK) <<
+		CCDC_DFCCTL_VDFCUDA_SHIFT;
+	val |= (dfc->dft_corr_ctl.vdflsft & CCDC_DFCCTL_VDFLSFT_MASK) <<
+		CCDC_DFCCTL_VDFLSFT_SHIFT;
+	regw(val , DFCCTL);
+
+	/* clear address ptr to offset 0 */
+	val = CCDC_DFCMEMCTL_DFCMARST_MASK << CCDC_DFCMEMCTL_DFCMARST_SHIFT;
+
+	/* write defect table entries */
+	for (i = 0; i < dfc->table_size; i++) {
+		/* increment address for non zero index */
+		if (i != 0)
+			val = CCDC_DFCMEMCTL_INC_ADDR;
+		regw(val, DFCMEMCTL);
+		if (ccdc_write_dfc_entry(i, dfc) < 0)
+			return -EFAULT;
+	}
+
+	/* update saturation level and enable dfc */
+	regw(dfc->saturation_ctl & CCDC_VDC_DFCVSAT_MASK, DFCVSAT);
+	val = regr(DFCCTL) | (CCDC_DFCCTL_VDFCEN_MASK <<
+			CCDC_DFCCTL_VDFCEN_SHIFT);
+	regw(val, DFCCTL);
+	return 0;
+}
+
+/*
+ * ccdc_config_csc()
+ * configure parameters for color space conversion
+ * Each register CSCM0-7 has two values in S8Q5 format.
+ */
+static void ccdc_config_csc(struct ccdc_csc *csc)
+{
+	u32 val1 = 0, val2;
+	int i;
+
+	if (!csc->enable)
+		return;
+
+	/* Enable the CSC sub-module */
+	regw(CCDC_CSC_ENABLE, CSCCTL);
+
+	/* Converting the co-eff as per the format of the register */
+	for (i = 0; i < CCDC_CSC_COEFF_TABLE_SIZE; i++) {
+		if ((i % 2) == 0) {
+			/* CSCM - LSB */
+			val1 = (csc->coeff[i].integer &
+				CCDC_CSC_COEF_INTEG_MASK)
+				<< CCDC_CSC_COEF_INTEG_SHIFT;
+			/*
+			 * convert decimal part to binary. Use 2 decimal
+			 * precision, user values range from .00 - 0.99
+			 */
+			val1 |= (((csc->coeff[i].decimal &
+				CCDC_CSC_COEF_DECIMAL_MASK) *
+				CCDC_CSC_DEC_MAX) / 100);
+		} else {
+
+			/* CSCM - MSB */
+			val2 = (csc->coeff[i].integer &
+				CCDC_CSC_COEF_INTEG_MASK)
+				<< CCDC_CSC_COEF_INTEG_SHIFT;
+			val2 |= (((csc->coeff[i].decimal &
+				 CCDC_CSC_COEF_DECIMAL_MASK) *
+				 CCDC_CSC_DEC_MAX) / 100);
+			val2 <<= CCDC_CSCM_MSB_SHIFT;
+			val2 |= val1;
+			regw(val2, (CSCM0 + ((i - 1) << 1)));
+		}
+	}
+}
+
+/*
+ * ccdc_config_color_patterns()
+ * configure parameters for color patterns
+ */
+static void ccdc_config_color_patterns(struct ccdc_col_pat *pat0,
+				       struct ccdc_col_pat *pat1)
+{
+	u32 val;
+
+	val = (pat0->olop | (pat0->olep << 2) | (pat0->elop << 4) |
+		(pat0->elep << 6) | (pat1->olop << 8) | (pat1->olep << 10) |
+		(pat1->elop << 12) | (pat1->elep << 14));
+	regw(val, COLPTN);
+}
+
+/* This function will configure CCDC for Raw mode image capture */
+static int ccdc_config_raw(void)
+{
+	struct ccdc_params_raw *params = &ccdc_cfg.bayer;
+	struct ccdc_config_params_raw *config_params =
+					&ccdc_cfg.bayer.config_params;
+	unsigned int val;
+
+	dev_dbg(ccdc_cfg.dev, "\nStarting ccdc_config_raw...");
+
+	/* restore power on defaults to register */
+	ccdc_restore_defaults();
+
+	/* CCDCFG register:
+	 * set CCD Not to swap input since input is RAW data
+	 * set FID detection function to Latch at V-Sync
+	 * set WENLOG - ccdc valid area to AND
+	 * set TRGSEL to WENBIT
+	 * set EXTRG to DISABLE
+	 * disable latching function on VSYNC - shadowed registers
+	 */
+	regw(CCDC_YCINSWP_RAW | CCDC_CCDCFG_FIDMD_LATCH_VSYNC |
+	     CCDC_CCDCFG_WENLOG_AND | CCDC_CCDCFG_TRGSEL_WEN |
+	     CCDC_CCDCFG_EXTRG_DISABLE | CCDC_LATCH_ON_VSYNC_DISABLE, CCDCFG);
+
+	/*
+	 * Set VDHD direction to input,  input type to raw input
+	 * normal data polarity, do not use external WEN
+	 */
+	val = (CCDC_VDHDOUT_INPUT | CCDC_RAW_IP_MODE | CCDC_DATAPOL_NORMAL |
+		CCDC_EXWEN_DISABLE);
+
+	/*
+	 * Configure the vertical sync polarity (MODESET.VDPOL), horizontal
+	 * sync polarity (MODESET.HDPOL), field id polarity (MODESET.FLDPOL),
+	 * frame format(progressive or interlace), & pixel format (Input mode)
+	 */
+	val |= (((params->vd_pol & CCDC_VD_POL_MASK) << CCDC_VD_POL_SHIFT) |
+		((params->hd_pol & CCDC_HD_POL_MASK) << CCDC_HD_POL_SHIFT) |
+		((params->fid_pol & CCDC_FID_POL_MASK) << CCDC_FID_POL_SHIFT) |
+		((params->frm_fmt & CCDC_FRM_FMT_MASK) << CCDC_FRM_FMT_SHIFT) |
+		((params->pix_fmt & CCDC_PIX_FMT_MASK) << CCDC_PIX_FMT_SHIFT));
+
+	/* set pack for alaw compression */
+	if ((config_params->data_sz == CCDC_DATA_8BITS) ||
+	     config_params->alaw.enable)
+		val |= CCDC_DATA_PACK_ENABLE;
+
+	/* Configure for LPF */
+	if (config_params->lpf_enable)
+		val |= (config_params->lpf_enable & CCDC_LPF_MASK) <<
+			CCDC_LPF_SHIFT;
+
+	/* Configure the data shift */
+	val |= (config_params->datasft & CCDC_DATASFT_MASK) <<
+		CCDC_DATASFT_SHIFT;
+	regw(val , MODESET);
+	dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to MODESET...\n", val);
+
+	/* Configure the Median Filter threshold */
+	regw((config_params->med_filt_thres) & CCDC_MED_FILT_THRESH, MEDFILT);
+
+	/* Configure GAMMAWD register. defaur 11-2, and Mosaic cfa pattern */
+	val = CCDC_GAMMA_BITS_11_2 << CCDC_GAMMAWD_INPUT_SHIFT |
+		CCDC_CFA_MOSAIC;
+
+	/* Enable and configure aLaw register if needed */
+	if (config_params->alaw.enable) {
+		val |= (CCDC_ALAW_ENABLE |
+			((config_params->alaw.gamma_wd &
+			CCDC_ALAW_GAMMA_WD_MASK) <<
+			CCDC_GAMMAWD_INPUT_SHIFT));
+	}
+
+	/* Configure Median filter1 & filter2 */
+	val |= ((config_params->mfilt1 << CCDC_MFILT1_SHIFT) |
+		(config_params->mfilt2 << CCDC_MFILT2_SHIFT));
+
+	regw(val, GAMMAWD);
+	dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to GAMMAWD...\n", val);
+
+	/* configure video window */
+	ccdc_setwin(&params->win, params->frm_fmt, 1);
+
+	/* Optical Clamp Averaging */
+	ccdc_config_black_clamp(&config_params->blk_clamp);
+
+	/* Black level compensation */
+	ccdc_config_black_compense(&config_params->blk_comp);
+
+	/* Vertical Defect Correction if needed */
+	if (ccdc_config_vdfc(&config_params->vertical_dft) < 0)
+		return -EFAULT;
+
+	/* color space conversion */
+	ccdc_config_csc(&config_params->csc);
+
+	/* color pattern */
+	ccdc_config_color_patterns(&config_params->col_pat_field0,
+				   &config_params->col_pat_field1);
+
+	/* Configure the Gain  & offset control */
+	ccdc_config_gain_offset();
+
+	dev_dbg(ccdc_cfg.dev, "\nWriting %x to COLPTN...\n", val);
+
+	/* Configure DATAOFST  register */
+	val = (config_params->data_offset.horz_offset & CCDC_DATAOFST_MASK) <<
+		CCDC_DATAOFST_H_SHIFT;
+	val |= (config_params->data_offset.vert_offset & CCDC_DATAOFST_MASK) <<
+		CCDC_DATAOFST_V_SHIFT;
+	regw(val, DATAOFST);
+
+	/* configuring HSIZE register */
+	val = (params->horz_flip_enable & CCDC_HSIZE_FLIP_MASK) <<
+		CCDC_HSIZE_FLIP_SHIFT;
+
+	/* If pack 8 is enable then 1 pixel will take 1 byte */
+	if ((config_params->data_sz == CCDC_DATA_8BITS) ||
+	     config_params->alaw.enable) {
+		val |= (((params->win.width) + 31) >> 5) &
+			CCDC_HSIZE_VAL_MASK;
+
+		/* adjust to multiple of 32 */
+		dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to HSIZE...\n",
+		       (((params->win.width) + 31) >> 5) &
+			CCDC_HSIZE_VAL_MASK);
+	} else {
+		/* else one pixel will take 2 byte */
+		val |= (((params->win.width * 2) + 31) >> 5) &
+			CCDC_HSIZE_VAL_MASK;
+
+		dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to HSIZE...\n",
+		       (((params->win.width * 2) + 31) >> 5) &
+			CCDC_HSIZE_VAL_MASK);
+	}
+	regw(val, HSIZE);
+
+	/* Configure SDOFST register */
+	if (params->frm_fmt == CCDC_FRMFMT_INTERLACED) {
+		if (params->image_invert_enable) {
+			/* For interlace inverse mode */
+			regw(CCDC_SDOFST_INTERLACE_INVERSE, SDOFST);
+			dev_dbg(ccdc_cfg.dev, "\nWriting %x to SDOFST...\n",
+				CCDC_SDOFST_INTERLACE_INVERSE);
+		} else {
+			/* For interlace non inverse mode */
+			regw(CCDC_SDOFST_INTERLACE_NORMAL, SDOFST);
+			dev_dbg(ccdc_cfg.dev, "\nWriting %x to SDOFST...\n",
+				CCDC_SDOFST_INTERLACE_NORMAL);
+		}
+	} else if (params->frm_fmt == CCDC_FRMFMT_PROGRESSIVE) {
+		if (params->image_invert_enable) {
+			/* For progessive inverse mode */
+			regw(CCDC_SDOFST_PROGRESSIVE_INVERSE, SDOFST);
+			dev_dbg(ccdc_cfg.dev, "\nWriting %x to SDOFST...\n",
+				CCDC_SDOFST_PROGRESSIVE_INVERSE);
+		} else {
+			/* For progessive non inverse mode */
+			regw(CCDC_SDOFST_PROGRESSIVE_NORMAL, SDOFST);
+			dev_dbg(ccdc_cfg.dev, "\nWriting %x to SDOFST...\n",
+				CCDC_SDOFST_PROGRESSIVE_NORMAL);
+		}
+	}
+	dev_dbg(ccdc_cfg.dev, "\nend of ccdc_config_raw...");
+	return 0;
+}
+
+static int ccdc_configure(void)
+{
+	if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
+		return ccdc_config_raw();
+	else
+		ccdc_config_ycbcr();
+	return 0;
+}
+
+static int ccdc_set_buftype(enum ccdc_buftype buf_type)
+{
+	if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
+		ccdc_cfg.bayer.buf_type = buf_type;
+	else
+		ccdc_cfg.ycbcr.buf_type = buf_type;
+	return 0;
+}
+static enum ccdc_buftype ccdc_get_buftype(void)
+{
+	if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
+		return ccdc_cfg.bayer.buf_type;
+	return ccdc_cfg.ycbcr.buf_type;
+}
+
+static int ccdc_enum_pix(u32 *pix, int i)
+{
+	int ret = -EINVAL;
+	if (ccdc_cfg.if_type == VPFE_RAW_BAYER) {
+		if (i < ARRAY_SIZE(ccdc_raw_bayer_pix_formats)) {
+			*pix = ccdc_raw_bayer_pix_formats[i];
+			ret = 0;
+		}
+	} else {
+		if (i < ARRAY_SIZE(ccdc_raw_yuv_pix_formats)) {
+			*pix = ccdc_raw_yuv_pix_formats[i];
+			ret = 0;
+		}
+	}
+	return ret;
+}
+
+static int ccdc_set_pixel_format(u32 pixfmt)
+{
+	struct ccdc_a_law *alaw = &ccdc_cfg.bayer.config_params.alaw;
+
+	if (ccdc_cfg.if_type == VPFE_RAW_BAYER) {
+		ccdc_cfg.bayer.pix_fmt = CCDC_PIXFMT_RAW;
+		if (pixfmt == V4L2_PIX_FMT_SBGGR8)
+			alaw->enable = 1;
+		else if (pixfmt != V4L2_PIX_FMT_SBGGR16)
+			return -EINVAL;
+	} else {
+		if (pixfmt == V4L2_PIX_FMT_YUYV)
+			ccdc_cfg.ycbcr.pix_order = CCDC_PIXORDER_YCBYCR;
+		else if (pixfmt == V4L2_PIX_FMT_UYVY)
+			ccdc_cfg.ycbcr.pix_order = CCDC_PIXORDER_CBYCRY;
+		else
+			return -EINVAL;
+	}
+	return 0;
+}
+static u32 ccdc_get_pixel_format(void)
+{
+	struct ccdc_a_law *alaw = &ccdc_cfg.bayer.config_params.alaw;
+	u32 pixfmt;
+
+	if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
+		if (alaw->enable)
+			pixfmt = V4L2_PIX_FMT_SBGGR8;
+		else
+			pixfmt = V4L2_PIX_FMT_SBGGR16;
+	else {
+		if (ccdc_cfg.ycbcr.pix_order == CCDC_PIXORDER_YCBYCR)
+			pixfmt = V4L2_PIX_FMT_YUYV;
+		else
+			pixfmt = V4L2_PIX_FMT_UYVY;
+	}
+	return pixfmt;
+}
+static int ccdc_set_image_window(struct v4l2_rect *win)
+{
+	if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
+		ccdc_cfg.bayer.win = *win;
+	else
+		ccdc_cfg.ycbcr.win = *win;
+	return 0;
+}
+
+static void ccdc_get_image_window(struct v4l2_rect *win)
+{
+	if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
+		*win = ccdc_cfg.bayer.win;
+	else
+		*win = ccdc_cfg.ycbcr.win;
+}
+
+static unsigned int ccdc_get_line_length(void)
+{
+	struct ccdc_config_params_raw *config_params =
+				&ccdc_cfg.bayer.config_params;
+	unsigned int len;
+
+	if (ccdc_cfg.if_type == VPFE_RAW_BAYER) {
+		if ((config_params->alaw.enable) ||
+		    (config_params->data_sz == CCDC_DATA_8BITS))
+			len = ccdc_cfg.bayer.win.width;
+		else
+			len = ccdc_cfg.bayer.win.width * 2;
+	} else
+		len = ccdc_cfg.ycbcr.win.width * 2;
+	return ALIGN(len, 32);
+}
+
+static int ccdc_set_frame_format(enum ccdc_frmfmt frm_fmt)
+{
+	if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
+		ccdc_cfg.bayer.frm_fmt = frm_fmt;
+	else
+		ccdc_cfg.ycbcr.frm_fmt = frm_fmt;
+	return 0;
+}
+
+static enum ccdc_frmfmt ccdc_get_frame_format(void)
+{
+	if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
+		return ccdc_cfg.bayer.frm_fmt;
+	else
+		return ccdc_cfg.ycbcr.frm_fmt;
+}
+
+static int ccdc_getfid(void)
+{
+	return  (regr(MODESET) >> 15) & 1;
+}
+
+/* misc operations */
+static inline void ccdc_setfbaddr(unsigned long addr)
+{
+	regw((addr >> 21) & 0x007f, STADRH);
+	regw((addr >> 5) & 0x0ffff, STADRL);
+}
+
+static int ccdc_set_hw_if_params(struct vpfe_hw_if_param *params)
+{
+	ccdc_cfg.if_type = params->if_type;
+
+	switch (params->if_type) {
+	case VPFE_BT656:
+	case VPFE_YCBCR_SYNC_16:
+	case VPFE_YCBCR_SYNC_8:
+		ccdc_cfg.ycbcr.vd_pol = params->vdpol;
+		ccdc_cfg.ycbcr.hd_pol = params->hdpol;
+		break;
+	default:
+		/* TODO add support for raw bayer here */
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static struct ccdc_hw_device ccdc_hw_dev = {
+	.name = "DM355 CCDC",
+	.owner = THIS_MODULE,
+	.hw_ops = {
+		.open = ccdc_open,
+		.close = ccdc_close,
+		.enable = ccdc_enable,
+		.enable_out_to_sdram = ccdc_enable_output_to_sdram,
+		.set_hw_if_params = ccdc_set_hw_if_params,
+		.set_params = ccdc_set_params,
+		.configure = ccdc_configure,
+		.set_buftype = ccdc_set_buftype,
+		.get_buftype = ccdc_get_buftype,
+		.enum_pix = ccdc_enum_pix,
+		.set_pixel_format = ccdc_set_pixel_format,
+		.get_pixel_format = ccdc_get_pixel_format,
+		.set_frame_format = ccdc_set_frame_format,
+		.get_frame_format = ccdc_get_frame_format,
+		.set_image_window = ccdc_set_image_window,
+		.get_image_window = ccdc_get_image_window,
+		.get_line_length = ccdc_get_line_length,
+		.setfbaddr = ccdc_setfbaddr,
+		.getfid = ccdc_getfid,
+	},
+};
+
+static int dm355_ccdc_probe(struct platform_device *pdev)
+{
+	void (*setup_pinmux)(void);
+	struct resource	*res;
+	int status = 0;
+
+	/*
+	 * first try to register with vpfe. If not correct platform, then we
+	 * don't have to iomap
+	 */
+	status = vpfe_register_ccdc_device(&ccdc_hw_dev);
+	if (status < 0)
+		return status;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		status = -ENODEV;
+		goto fail_nores;
+	}
+
+	res = request_mem_region(res->start, resource_size(res), res->name);
+	if (!res) {
+		status = -EBUSY;
+		goto fail_nores;
+	}
+
+	ccdc_cfg.base_addr = ioremap_nocache(res->start, resource_size(res));
+	if (!ccdc_cfg.base_addr) {
+		status = -ENOMEM;
+		goto fail_nomem;
+	}
+
+	/* Platform data holds setup_pinmux function ptr */
+	if (NULL == pdev->dev.platform_data) {
+		status = -ENODEV;
+		goto fail_nomap;
+	}
+	setup_pinmux = pdev->dev.platform_data;
+	/*
+	 * setup Mux configuration for ccdc which may be different for
+	 * different SoCs using this CCDC
+	 */
+	setup_pinmux();
+	ccdc_cfg.dev = &pdev->dev;
+	printk(KERN_NOTICE "%s is registered with vpfe.\n", ccdc_hw_dev.name);
+	return 0;
+fail_nomap:
+	iounmap(ccdc_cfg.base_addr);
+fail_nomem:
+	release_mem_region(res->start, resource_size(res));
+fail_nores:
+	vpfe_unregister_ccdc_device(&ccdc_hw_dev);
+	return status;
+}
+
+static int dm355_ccdc_remove(struct platform_device *pdev)
+{
+	struct resource	*res;
+
+	iounmap(ccdc_cfg.base_addr);
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res)
+		release_mem_region(res->start, resource_size(res));
+	vpfe_unregister_ccdc_device(&ccdc_hw_dev);
+	return 0;
+}
+
+static struct platform_driver dm355_ccdc_driver = {
+	.driver = {
+		.name	= "dm355_ccdc",
+	},
+	.remove = dm355_ccdc_remove,
+	.probe = dm355_ccdc_probe,
+};
+
+module_platform_driver(dm355_ccdc_driver);
diff --git a/drivers/media/platform/davinci/dm355_ccdc_regs.h b/drivers/media/platform/davinci/dm355_ccdc_regs.h
new file mode 100644
index 000000000..2e1946e0b
--- /dev/null
+++ b/drivers/media/platform/davinci/dm355_ccdc_regs.h
@@ -0,0 +1,310 @@
+/*
+ * Copyright (C) 2005-2009 Texas Instruments Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef _DM355_CCDC_REGS_H
+#define _DM355_CCDC_REGS_H
+
+/**************************************************************************\
+* Register OFFSET Definitions
+\**************************************************************************/
+#define SYNCEN				0x00
+#define MODESET				0x04
+#define HDWIDTH				0x08
+#define VDWIDTH				0x0c
+#define PPLN				0x10
+#define LPFR				0x14
+#define SPH				0x18
+#define NPH				0x1c
+#define SLV0				0x20
+#define SLV1				0x24
+#define NLV				0x28
+#define CULH				0x2c
+#define CULV				0x30
+#define HSIZE				0x34
+#define SDOFST				0x38
+#define STADRH				0x3c
+#define STADRL				0x40
+#define CLAMP				0x44
+#define DCSUB				0x48
+#define COLPTN				0x4c
+#define BLKCMP0				0x50
+#define BLKCMP1				0x54
+#define MEDFILT				0x58
+#define RYEGAIN				0x5c
+#define GRCYGAIN			0x60
+#define GBGGAIN				0x64
+#define BMGGAIN				0x68
+#define OFFSET				0x6c
+#define OUTCLIP				0x70
+#define VDINT0				0x74
+#define VDINT1				0x78
+#define RSV0				0x7c
+#define GAMMAWD				0x80
+#define REC656IF			0x84
+#define CCDCFG				0x88
+#define FMTCFG				0x8c
+#define FMTPLEN				0x90
+#define FMTSPH				0x94
+#define FMTLNH				0x98
+#define FMTSLV				0x9c
+#define FMTLNV				0xa0
+#define FMTRLEN				0xa4
+#define FMTHCNT				0xa8
+#define FMT_ADDR_PTR_B			0xac
+#define FMT_ADDR_PTR(i)			(FMT_ADDR_PTR_B + (i * 4))
+#define FMTPGM_VF0			0xcc
+#define FMTPGM_VF1			0xd0
+#define FMTPGM_AP0			0xd4
+#define FMTPGM_AP1			0xd8
+#define FMTPGM_AP2			0xdc
+#define FMTPGM_AP3                      0xe0
+#define FMTPGM_AP4                      0xe4
+#define FMTPGM_AP5                      0xe8
+#define FMTPGM_AP6                      0xec
+#define FMTPGM_AP7                      0xf0
+#define LSCCFG1                         0xf4
+#define LSCCFG2                         0xf8
+#define LSCH0                           0xfc
+#define LSCV0                           0x100
+#define LSCKH                           0x104
+#define LSCKV                           0x108
+#define LSCMEMCTL                       0x10c
+#define LSCMEMD                         0x110
+#define LSCMEMQ                         0x114
+#define DFCCTL                          0x118
+#define DFCVSAT                         0x11c
+#define DFCMEMCTL                       0x120
+#define DFCMEM0                         0x124
+#define DFCMEM1                         0x128
+#define DFCMEM2                         0x12c
+#define DFCMEM3                         0x130
+#define DFCMEM4                         0x134
+#define CSCCTL                          0x138
+#define CSCM0                           0x13c
+#define CSCM1                           0x140
+#define CSCM2                           0x144
+#define CSCM3                           0x148
+#define CSCM4                           0x14c
+#define CSCM5                           0x150
+#define CSCM6                           0x154
+#define CSCM7                           0x158
+#define DATAOFST			0x15c
+#define CCDC_REG_LAST			DATAOFST
+/**************************************************************
+*	Define for various register bit mask and shifts for CCDC
+*
+**************************************************************/
+#define CCDC_RAW_IP_MODE			0
+#define CCDC_VDHDOUT_INPUT			0
+#define CCDC_YCINSWP_RAW			(0 << 4)
+#define CCDC_EXWEN_DISABLE 			0
+#define CCDC_DATAPOL_NORMAL			0
+#define CCDC_CCDCFG_FIDMD_LATCH_VSYNC		0
+#define CCDC_CCDCFG_FIDMD_NO_LATCH_VSYNC	(1 << 6)
+#define CCDC_CCDCFG_WENLOG_AND			0
+#define CCDC_CCDCFG_TRGSEL_WEN			0
+#define CCDC_CCDCFG_EXTRG_DISABLE		0
+#define CCDC_CFA_MOSAIC				0
+#define CCDC_Y8POS_SHIFT			11
+
+#define CCDC_VDC_DFCVSAT_MASK			0x3fff
+#define CCDC_DATAOFST_MASK			0x0ff
+#define CCDC_DATAOFST_H_SHIFT			0
+#define CCDC_DATAOFST_V_SHIFT			8
+#define CCDC_GAMMAWD_CFA_MASK			1
+#define CCDC_GAMMAWD_CFA_SHIFT			5
+#define CCDC_GAMMAWD_INPUT_SHIFT		2
+#define CCDC_FID_POL_MASK			1
+#define CCDC_FID_POL_SHIFT			4
+#define CCDC_HD_POL_MASK			1
+#define CCDC_HD_POL_SHIFT			3
+#define CCDC_VD_POL_MASK			1
+#define CCDC_VD_POL_SHIFT			2
+#define CCDC_VD_POL_NEGATIVE			(1 << 2)
+#define CCDC_FRM_FMT_MASK			1
+#define CCDC_FRM_FMT_SHIFT			7
+#define CCDC_DATA_SZ_MASK			7
+#define CCDC_DATA_SZ_SHIFT			8
+#define CCDC_VDHDOUT_MASK			1
+#define CCDC_VDHDOUT_SHIFT			0
+#define CCDC_EXWEN_MASK				1
+#define CCDC_EXWEN_SHIFT			5
+#define CCDC_INPUT_MODE_MASK			3
+#define CCDC_INPUT_MODE_SHIFT			12
+#define CCDC_PIX_FMT_MASK			3
+#define CCDC_PIX_FMT_SHIFT			12
+#define CCDC_DATAPOL_MASK			1
+#define CCDC_DATAPOL_SHIFT			6
+#define CCDC_WEN_ENABLE				(1 << 1)
+#define CCDC_VDHDEN_ENABLE			(1 << 16)
+#define CCDC_LPF_ENABLE				(1 << 14)
+#define CCDC_ALAW_ENABLE			1
+#define CCDC_ALAW_GAMMA_WD_MASK			7
+#define CCDC_REC656IF_BT656_EN			3
+
+#define CCDC_FMTCFG_FMTMODE_MASK 		3
+#define CCDC_FMTCFG_FMTMODE_SHIFT		1
+#define CCDC_FMTCFG_LNUM_MASK			3
+#define CCDC_FMTCFG_LNUM_SHIFT			4
+#define CCDC_FMTCFG_ADDRINC_MASK		7
+#define CCDC_FMTCFG_ADDRINC_SHIFT		8
+
+#define CCDC_CCDCFG_FIDMD_SHIFT			6
+#define	CCDC_CCDCFG_WENLOG_SHIFT		8
+#define CCDC_CCDCFG_TRGSEL_SHIFT		9
+#define CCDC_CCDCFG_EXTRG_SHIFT			10
+#define CCDC_CCDCFG_MSBINVI_SHIFT		13
+
+#define CCDC_HSIZE_FLIP_SHIFT			12
+#define CCDC_HSIZE_FLIP_MASK			1
+#define CCDC_HSIZE_VAL_MASK			0xFFF
+#define CCDC_SDOFST_FIELD_INTERLEAVED		0x249
+#define CCDC_SDOFST_INTERLACE_INVERSE		0x4B6D
+#define CCDC_SDOFST_INTERLACE_NORMAL		0x0B6D
+#define CCDC_SDOFST_PROGRESSIVE_INVERSE		0x4000
+#define CCDC_SDOFST_PROGRESSIVE_NORMAL		0
+#define CCDC_START_PX_HOR_MASK			0x7FFF
+#define CCDC_NUM_PX_HOR_MASK			0x7FFF
+#define CCDC_START_VER_ONE_MASK			0x7FFF
+#define CCDC_START_VER_TWO_MASK			0x7FFF
+#define CCDC_NUM_LINES_VER			0x7FFF
+
+#define CCDC_BLK_CLAMP_ENABLE			(1 << 15)
+#define CCDC_BLK_SGAIN_MASK			0x1F
+#define CCDC_BLK_ST_PXL_MASK			0x1FFF
+#define CCDC_BLK_SAMPLE_LN_MASK			3
+#define CCDC_BLK_SAMPLE_LN_SHIFT		13
+
+#define CCDC_NUM_LINE_CALC_MASK			3
+#define CCDC_NUM_LINE_CALC_SHIFT		14
+
+#define CCDC_BLK_DC_SUB_MASK			0x3FFF
+#define CCDC_BLK_COMP_MASK			0xFF
+#define CCDC_BLK_COMP_GB_COMP_SHIFT		8
+#define CCDC_BLK_COMP_GR_COMP_SHIFT		0
+#define CCDC_BLK_COMP_R_COMP_SHIFT		8
+#define CCDC_LATCH_ON_VSYNC_DISABLE		(1 << 15)
+#define CCDC_LATCH_ON_VSYNC_ENABLE		(0 << 15)
+#define CCDC_FPC_ENABLE				(1 << 15)
+#define CCDC_FPC_FPC_NUM_MASK 			0x7FFF
+#define CCDC_DATA_PACK_ENABLE			(1 << 11)
+#define CCDC_FMT_HORZ_FMTLNH_MASK		0x1FFF
+#define CCDC_FMT_HORZ_FMTSPH_MASK		0x1FFF
+#define CCDC_FMT_HORZ_FMTSPH_SHIFT		16
+#define CCDC_FMT_VERT_FMTLNV_MASK		0x1FFF
+#define CCDC_FMT_VERT_FMTSLV_MASK		0x1FFF
+#define CCDC_FMT_VERT_FMTSLV_SHIFT		16
+#define CCDC_VP_OUT_VERT_NUM_MASK		0x3FFF
+#define CCDC_VP_OUT_VERT_NUM_SHIFT		17
+#define CCDC_VP_OUT_HORZ_NUM_MASK		0x1FFF
+#define CCDC_VP_OUT_HORZ_NUM_SHIFT		4
+#define CCDC_VP_OUT_HORZ_ST_MASK		0xF
+
+#define CCDC_CSC_COEF_INTEG_MASK		7
+#define CCDC_CSC_COEF_DECIMAL_MASK		0x1f
+#define CCDC_CSC_COEF_INTEG_SHIFT		5
+#define CCDC_CSCM_MSB_SHIFT			8
+#define CCDC_CSC_ENABLE				1
+#define CCDC_CSC_DEC_MAX			32
+
+#define CCDC_MFILT1_SHIFT			10
+#define CCDC_MFILT2_SHIFT			8
+#define CCDC_MED_FILT_THRESH			0x3FFF
+#define CCDC_LPF_MASK				1
+#define CCDC_LPF_SHIFT				14
+#define CCDC_OFFSET_MASK			0x3FF
+#define CCDC_DATASFT_MASK			7
+#define CCDC_DATASFT_SHIFT			8
+
+#define CCDC_DF_ENABLE				1
+
+#define CCDC_FMTPLEN_P0_MASK			0xF
+#define CCDC_FMTPLEN_P1_MASK			0xF
+#define CCDC_FMTPLEN_P2_MASK			7
+#define CCDC_FMTPLEN_P3_MASK			7
+#define CCDC_FMTPLEN_P0_SHIFT			0
+#define CCDC_FMTPLEN_P1_SHIFT			4
+#define CCDC_FMTPLEN_P2_SHIFT			8
+#define CCDC_FMTPLEN_P3_SHIFT			12
+
+#define CCDC_FMTSPH_MASK			0x1FFF
+#define CCDC_FMTLNH_MASK			0x1FFF
+#define CCDC_FMTSLV_MASK			0x1FFF
+#define CCDC_FMTLNV_MASK			0x7FFF
+#define CCDC_FMTRLEN_MASK			0x1FFF
+#define CCDC_FMTHCNT_MASK			0x1FFF
+
+#define CCDC_ADP_INIT_MASK			0x1FFF
+#define CCDC_ADP_LINE_SHIFT			13
+#define CCDC_ADP_LINE_MASK			3
+#define CCDC_FMTPGN_APTR_MASK			7
+
+#define CCDC_DFCCTL_GDFCEN_MASK			1
+#define CCDC_DFCCTL_VDFCEN_MASK			1
+#define CCDC_DFCCTL_VDFC_DISABLE		(0 << 4)
+#define CCDC_DFCCTL_VDFCEN_SHIFT		4
+#define CCDC_DFCCTL_VDFCSL_MASK			3
+#define CCDC_DFCCTL_VDFCSL_SHIFT		5
+#define CCDC_DFCCTL_VDFCUDA_MASK		1
+#define CCDC_DFCCTL_VDFCUDA_SHIFT		7
+#define CCDC_DFCCTL_VDFLSFT_MASK		3
+#define CCDC_DFCCTL_VDFLSFT_SHIFT		8
+#define CCDC_DFCMEMCTL_DFCMARST_MASK		1
+#define CCDC_DFCMEMCTL_DFCMARST_SHIFT		2
+#define CCDC_DFCMEMCTL_DFCMWR_MASK		1
+#define CCDC_DFCMEMCTL_DFCMWR_SHIFT		0
+#define CCDC_DFCMEMCTL_INC_ADDR			(0 << 2)
+
+#define CCDC_LSCCFG_GFTSF_MASK			7
+#define CCDC_LSCCFG_GFTSF_SHIFT			1
+#define CCDC_LSCCFG_GFTINV_MASK			0xf
+#define CCDC_LSCCFG_GFTINV_SHIFT		4
+#define CCDC_LSC_GFTABLE_SEL_MASK		3
+#define CCDC_LSC_GFTABLE_EPEL_SHIFT		8
+#define CCDC_LSC_GFTABLE_OPEL_SHIFT		10
+#define CCDC_LSC_GFTABLE_EPOL_SHIFT		12
+#define CCDC_LSC_GFTABLE_OPOL_SHIFT		14
+#define CCDC_LSC_GFMODE_MASK			3
+#define CCDC_LSC_GFMODE_SHIFT			4
+#define CCDC_LSC_DISABLE			0
+#define CCDC_LSC_ENABLE				1
+#define CCDC_LSC_TABLE1_SLC			0
+#define CCDC_LSC_TABLE2_SLC			1
+#define CCDC_LSC_TABLE3_SLC			2
+#define CCDC_LSC_MEMADDR_RESET			(1 << 2)
+#define CCDC_LSC_MEMADDR_INCR			(0 << 2)
+#define CCDC_LSC_FRAC_MASK_T1			0xFF
+#define CCDC_LSC_INT_MASK			3
+#define CCDC_LSC_FRAC_MASK			0x3FFF
+#define CCDC_LSC_CENTRE_MASK			0x3FFF
+#define CCDC_LSC_COEF_MASK			0xff
+#define CCDC_LSC_COEFL_SHIFT			0
+#define CCDC_LSC_COEFU_SHIFT			8
+#define CCDC_GAIN_MASK				0x7FF
+#define CCDC_SYNCEN_VDHDEN_MASK			(1 << 0)
+#define CCDC_SYNCEN_WEN_MASK			(1 << 1)
+#define CCDC_SYNCEN_WEN_SHIFT			1
+
+/* Power on Defaults in hardware */
+#define MODESET_DEFAULT				0x200
+#define CULH_DEFAULT				0xFFFF
+#define CULV_DEFAULT				0xFF
+#define GAIN_DEFAULT				256
+#define OUTCLIP_DEFAULT				0x3FFF
+#define LSCCFG2_DEFAULT				0xE
+
+#endif
diff --git a/drivers/media/platform/davinci/dm644x_ccdc.c b/drivers/media/platform/davinci/dm644x_ccdc.c
new file mode 100644
index 000000000..ffbefdff6
--- /dev/null
+++ b/drivers/media/platform/davinci/dm644x_ccdc.c
@@ -0,0 +1,1038 @@
+/*
+ * Copyright (C) 2006-2009 Texas Instruments Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ * CCDC hardware module for DM6446
+ * ------------------------------
+ *
+ * This module is for configuring CCD controller of DM6446 VPFE to capture
+ * Raw yuv or Bayer RGB data from a decoder. CCDC has several modules
+ * such as Defect Pixel Correction, Color Space Conversion etc to
+ * pre-process the Raw Bayer RGB data, before writing it to SDRAM. This
+ * module also allows application to configure individual
+ * module parameters through VPFE_CMD_S_CCDC_RAW_PARAMS IOCTL.
+ * To do so, application includes dm644x_ccdc.h and vpfe_capture.h header
+ * files.  The setparams() API is called by vpfe_capture driver
+ * to configure module parameters. This file is named DM644x so that other
+ * variants such DM6443 may be supported using the same module.
+ *
+ * TODO: Test Raw bayer parameter settings and bayer capture
+ * 	 Split module parameter structure to module specific ioctl structs
+ * 	 investigate if enum used for user space type definition
+ * 	 to be replaced by #defines or integer
+ */
+#include <linux/platform_device.h>
+#include <linux/uaccess.h>
+#include <linux/videodev2.h>
+#include <linux/gfp.h>
+#include <linux/err.h>
+#include <linux/module.h>
+
+#include <media/davinci/dm644x_ccdc.h>
+#include <media/davinci/vpss.h>
+
+#include "dm644x_ccdc_regs.h"
+#include "ccdc_hw_device.h"
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("CCDC Driver for DM6446");
+MODULE_AUTHOR("Texas Instruments");
+
+static struct ccdc_oper_config {
+	struct device *dev;
+	/* CCDC interface type */
+	enum vpfe_hw_if_type if_type;
+	/* Raw Bayer configuration */
+	struct ccdc_params_raw bayer;
+	/* YCbCr configuration */
+	struct ccdc_params_ycbcr ycbcr;
+	/* ccdc base address */
+	void __iomem *base_addr;
+} ccdc_cfg = {
+	/* Raw configurations */
+	.bayer = {
+		.pix_fmt = CCDC_PIXFMT_RAW,
+		.frm_fmt = CCDC_FRMFMT_PROGRESSIVE,
+		.win = CCDC_WIN_VGA,
+		.fid_pol = VPFE_PINPOL_POSITIVE,
+		.vd_pol = VPFE_PINPOL_POSITIVE,
+		.hd_pol = VPFE_PINPOL_POSITIVE,
+		.config_params = {
+			.data_sz = CCDC_DATA_10BITS,
+		},
+	},
+	.ycbcr = {
+		.pix_fmt = CCDC_PIXFMT_YCBCR_8BIT,
+		.frm_fmt = CCDC_FRMFMT_INTERLACED,
+		.win = CCDC_WIN_PAL,
+		.fid_pol = VPFE_PINPOL_POSITIVE,
+		.vd_pol = VPFE_PINPOL_POSITIVE,
+		.hd_pol = VPFE_PINPOL_POSITIVE,
+		.bt656_enable = 1,
+		.pix_order = CCDC_PIXORDER_CBYCRY,
+		.buf_type = CCDC_BUFTYPE_FLD_INTERLEAVED
+	},
+};
+
+#define CCDC_MAX_RAW_YUV_FORMATS	2
+
+/* Raw Bayer formats */
+static u32 ccdc_raw_bayer_pix_formats[] =
+	{V4L2_PIX_FMT_SBGGR8, V4L2_PIX_FMT_SBGGR16};
+
+/* Raw YUV formats */
+static u32 ccdc_raw_yuv_pix_formats[] =
+	{V4L2_PIX_FMT_UYVY, V4L2_PIX_FMT_YUYV};
+
+/* CCDC Save/Restore context */
+static u32 ccdc_ctx[CCDC_REG_END / sizeof(u32)];
+
+/* register access routines */
+static inline u32 regr(u32 offset)
+{
+	return __raw_readl(ccdc_cfg.base_addr + offset);
+}
+
+static inline void regw(u32 val, u32 offset)
+{
+	__raw_writel(val, ccdc_cfg.base_addr + offset);
+}
+
+static void ccdc_enable(int flag)
+{
+	regw(flag, CCDC_PCR);
+}
+
+static void ccdc_enable_vport(int flag)
+{
+	if (flag)
+		/* enable video port */
+		regw(CCDC_ENABLE_VIDEO_PORT, CCDC_FMTCFG);
+	else
+		regw(CCDC_DISABLE_VIDEO_PORT, CCDC_FMTCFG);
+}
+
+/*
+ * ccdc_setwin()
+ * This function will configure the window size
+ * to be capture in CCDC reg
+ */
+static void ccdc_setwin(struct v4l2_rect *image_win,
+			enum ccdc_frmfmt frm_fmt,
+			int ppc)
+{
+	int horz_start, horz_nr_pixels;
+	int vert_start, vert_nr_lines;
+	int val = 0, mid_img = 0;
+
+	dev_dbg(ccdc_cfg.dev, "\nStarting ccdc_setwin...");
+	/*
+	 * ppc - per pixel count. indicates how many pixels per cell
+	 * output to SDRAM. example, for ycbcr, it is one y and one c, so 2.
+	 * raw capture this is 1
+	 */
+	horz_start = image_win->left << (ppc - 1);
+	horz_nr_pixels = (image_win->width << (ppc - 1)) - 1;
+	regw((horz_start << CCDC_HORZ_INFO_SPH_SHIFT) | horz_nr_pixels,
+	     CCDC_HORZ_INFO);
+
+	vert_start = image_win->top;
+
+	if (frm_fmt == CCDC_FRMFMT_INTERLACED) {
+		vert_nr_lines = (image_win->height >> 1) - 1;
+		vert_start >>= 1;
+		/* Since first line doesn't have any data */
+		vert_start += 1;
+		/* configure VDINT0 */
+		val = (vert_start << CCDC_VDINT_VDINT0_SHIFT);
+		regw(val, CCDC_VDINT);
+
+	} else {
+		/* Since first line doesn't have any data */
+		vert_start += 1;
+		vert_nr_lines = image_win->height - 1;
+		/*
+		 * configure VDINT0 and VDINT1. VDINT1 will be at half
+		 * of image height
+		 */
+		mid_img = vert_start + (image_win->height / 2);
+		val = (vert_start << CCDC_VDINT_VDINT0_SHIFT) |
+		    (mid_img & CCDC_VDINT_VDINT1_MASK);
+		regw(val, CCDC_VDINT);
+
+	}
+	regw((vert_start << CCDC_VERT_START_SLV0_SHIFT) | vert_start,
+	     CCDC_VERT_START);
+	regw(vert_nr_lines, CCDC_VERT_LINES);
+	dev_dbg(ccdc_cfg.dev, "\nEnd of ccdc_setwin...");
+}
+
+static void ccdc_readregs(void)
+{
+	unsigned int val = 0;
+
+	val = regr(CCDC_ALAW);
+	dev_notice(ccdc_cfg.dev, "\nReading 0x%x to ALAW...\n", val);
+	val = regr(CCDC_CLAMP);
+	dev_notice(ccdc_cfg.dev, "\nReading 0x%x to CLAMP...\n", val);
+	val = regr(CCDC_DCSUB);
+	dev_notice(ccdc_cfg.dev, "\nReading 0x%x to DCSUB...\n", val);
+	val = regr(CCDC_BLKCMP);
+	dev_notice(ccdc_cfg.dev, "\nReading 0x%x to BLKCMP...\n", val);
+	val = regr(CCDC_FPC_ADDR);
+	dev_notice(ccdc_cfg.dev, "\nReading 0x%x to FPC_ADDR...\n", val);
+	val = regr(CCDC_FPC);
+	dev_notice(ccdc_cfg.dev, "\nReading 0x%x to FPC...\n", val);
+	val = regr(CCDC_FMTCFG);
+	dev_notice(ccdc_cfg.dev, "\nReading 0x%x to FMTCFG...\n", val);
+	val = regr(CCDC_COLPTN);
+	dev_notice(ccdc_cfg.dev, "\nReading 0x%x to COLPTN...\n", val);
+	val = regr(CCDC_FMT_HORZ);
+	dev_notice(ccdc_cfg.dev, "\nReading 0x%x to FMT_HORZ...\n", val);
+	val = regr(CCDC_FMT_VERT);
+	dev_notice(ccdc_cfg.dev, "\nReading 0x%x to FMT_VERT...\n", val);
+	val = regr(CCDC_HSIZE_OFF);
+	dev_notice(ccdc_cfg.dev, "\nReading 0x%x to HSIZE_OFF...\n", val);
+	val = regr(CCDC_SDOFST);
+	dev_notice(ccdc_cfg.dev, "\nReading 0x%x to SDOFST...\n", val);
+	val = regr(CCDC_VP_OUT);
+	dev_notice(ccdc_cfg.dev, "\nReading 0x%x to VP_OUT...\n", val);
+	val = regr(CCDC_SYN_MODE);
+	dev_notice(ccdc_cfg.dev, "\nReading 0x%x to SYN_MODE...\n", val);
+	val = regr(CCDC_HORZ_INFO);
+	dev_notice(ccdc_cfg.dev, "\nReading 0x%x to HORZ_INFO...\n", val);
+	val = regr(CCDC_VERT_START);
+	dev_notice(ccdc_cfg.dev, "\nReading 0x%x to VERT_START...\n", val);
+	val = regr(CCDC_VERT_LINES);
+	dev_notice(ccdc_cfg.dev, "\nReading 0x%x to VERT_LINES...\n", val);
+}
+
+static int validate_ccdc_param(struct ccdc_config_params_raw *ccdcparam)
+{
+	if (ccdcparam->alaw.enable) {
+		u8 max_gamma = ccdc_gamma_width_max_bit(ccdcparam->alaw.gamma_wd);
+		u8 max_data = ccdc_data_size_max_bit(ccdcparam->data_sz);
+
+		if ((ccdcparam->alaw.gamma_wd > CCDC_GAMMA_BITS_09_0) ||
+		    (ccdcparam->alaw.gamma_wd < CCDC_GAMMA_BITS_15_6) ||
+		    (max_gamma > max_data)) {
+			dev_dbg(ccdc_cfg.dev, "\nInvalid data line select");
+			return -1;
+		}
+	}
+	return 0;
+}
+
+static int ccdc_update_raw_params(struct ccdc_config_params_raw *raw_params)
+{
+	struct ccdc_config_params_raw *config_params =
+				&ccdc_cfg.bayer.config_params;
+	unsigned int *fpc_virtaddr = NULL;
+	unsigned int *fpc_physaddr = NULL;
+
+	memcpy(config_params, raw_params, sizeof(*raw_params));
+	/*
+	 * allocate memory for fault pixel table and copy the user
+	 * values to the table
+	 */
+	if (!config_params->fault_pxl.enable)
+		return 0;
+
+	fpc_physaddr = (unsigned int *)config_params->fault_pxl.fpc_table_addr;
+	fpc_virtaddr = (unsigned int *)phys_to_virt(
+				(unsigned long)fpc_physaddr);
+	/*
+	 * Allocate memory for FPC table if current
+	 * FPC table buffer is not big enough to
+	 * accommodate FPC Number requested
+	 */
+	if (raw_params->fault_pxl.fp_num != config_params->fault_pxl.fp_num) {
+		if (fpc_physaddr != NULL) {
+			free_pages((unsigned long)fpc_physaddr,
+				   get_order
+				   (config_params->fault_pxl.fp_num *
+				   FP_NUM_BYTES));
+		}
+
+		/* Allocate memory for FPC table */
+		fpc_virtaddr =
+			(unsigned int *)__get_free_pages(GFP_KERNEL | GFP_DMA,
+							 get_order(raw_params->
+							 fault_pxl.fp_num *
+							 FP_NUM_BYTES));
+
+		if (fpc_virtaddr == NULL) {
+			dev_dbg(ccdc_cfg.dev,
+				"\nUnable to allocate memory for FPC");
+			return -EFAULT;
+		}
+		fpc_physaddr =
+		    (unsigned int *)virt_to_phys((void *)fpc_virtaddr);
+	}
+
+	/* Copy number of fault pixels and FPC table */
+	config_params->fault_pxl.fp_num = raw_params->fault_pxl.fp_num;
+	if (copy_from_user(fpc_virtaddr,
+			(void __user *)raw_params->fault_pxl.fpc_table_addr,
+			config_params->fault_pxl.fp_num * FP_NUM_BYTES)) {
+		dev_dbg(ccdc_cfg.dev, "\n copy_from_user failed");
+		return -EFAULT;
+	}
+	config_params->fault_pxl.fpc_table_addr = (unsigned long)fpc_physaddr;
+	return 0;
+}
+
+static int ccdc_close(struct device *dev)
+{
+	struct ccdc_config_params_raw *config_params =
+				&ccdc_cfg.bayer.config_params;
+	unsigned int *fpc_physaddr = NULL, *fpc_virtaddr = NULL;
+
+	fpc_physaddr = (unsigned int *)config_params->fault_pxl.fpc_table_addr;
+
+	if (fpc_physaddr != NULL) {
+		fpc_virtaddr = (unsigned int *)
+		    phys_to_virt((unsigned long)fpc_physaddr);
+		free_pages((unsigned long)fpc_virtaddr,
+			   get_order(config_params->fault_pxl.fp_num *
+			   FP_NUM_BYTES));
+	}
+	return 0;
+}
+
+/*
+ * ccdc_restore_defaults()
+ * This function will write defaults to all CCDC registers
+ */
+static void ccdc_restore_defaults(void)
+{
+	int i;
+
+	/* disable CCDC */
+	ccdc_enable(0);
+	/* set all registers to default value */
+	for (i = 4; i <= 0x94; i += 4)
+		regw(0,  i);
+	regw(CCDC_NO_CULLING, CCDC_CULLING);
+	regw(CCDC_GAMMA_BITS_11_2, CCDC_ALAW);
+}
+
+static int ccdc_open(struct device *device)
+{
+	ccdc_restore_defaults();
+	if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
+		ccdc_enable_vport(1);
+	return 0;
+}
+
+static void ccdc_sbl_reset(void)
+{
+	vpss_clear_wbl_overflow(VPSS_PCR_CCDC_WBL_O);
+}
+
+/* Parameter operations */
+static int ccdc_set_params(void __user *params)
+{
+	struct ccdc_config_params_raw ccdc_raw_params;
+	int x;
+
+	if (ccdc_cfg.if_type != VPFE_RAW_BAYER)
+		return -EINVAL;
+
+	x = copy_from_user(&ccdc_raw_params, params, sizeof(ccdc_raw_params));
+	if (x) {
+		dev_dbg(ccdc_cfg.dev, "ccdc_set_params: error in copying"
+			   "ccdc params, %d\n", x);
+		return -EFAULT;
+	}
+
+	if (!validate_ccdc_param(&ccdc_raw_params)) {
+		if (!ccdc_update_raw_params(&ccdc_raw_params))
+			return 0;
+	}
+	return -EINVAL;
+}
+
+/*
+ * ccdc_config_ycbcr()
+ * This function will configure CCDC for YCbCr video capture
+ */
+static void ccdc_config_ycbcr(void)
+{
+	struct ccdc_params_ycbcr *params = &ccdc_cfg.ycbcr;
+	u32 syn_mode;
+
+	dev_dbg(ccdc_cfg.dev, "\nStarting ccdc_config_ycbcr...");
+	/*
+	 * first restore the CCDC registers to default values
+	 * This is important since we assume default values to be set in
+	 * a lot of registers that we didn't touch
+	 */
+	ccdc_restore_defaults();
+
+	/*
+	 * configure pixel format, frame format, configure video frame
+	 * format, enable output to SDRAM, enable internal timing generator
+	 * and 8bit pack mode
+	 */
+	syn_mode = (((params->pix_fmt & CCDC_SYN_MODE_INPMOD_MASK) <<
+		    CCDC_SYN_MODE_INPMOD_SHIFT) |
+		    ((params->frm_fmt & CCDC_SYN_FLDMODE_MASK) <<
+		    CCDC_SYN_FLDMODE_SHIFT) | CCDC_VDHDEN_ENABLE |
+		    CCDC_WEN_ENABLE | CCDC_DATA_PACK_ENABLE);
+
+	/* setup BT.656 sync mode */
+	if (params->bt656_enable) {
+		regw(CCDC_REC656IF_BT656_EN, CCDC_REC656IF);
+
+		/*
+		 * configure the FID, VD, HD pin polarity,
+		 * fld,hd pol positive, vd negative, 8-bit data
+		 */
+		syn_mode |= CCDC_SYN_MODE_VD_POL_NEGATIVE;
+		if (ccdc_cfg.if_type == VPFE_BT656_10BIT)
+			syn_mode |= CCDC_SYN_MODE_10BITS;
+		else
+			syn_mode |= CCDC_SYN_MODE_8BITS;
+	} else {
+		/* y/c external sync mode */
+		syn_mode |= (((params->fid_pol & CCDC_FID_POL_MASK) <<
+			     CCDC_FID_POL_SHIFT) |
+			     ((params->hd_pol & CCDC_HD_POL_MASK) <<
+			     CCDC_HD_POL_SHIFT) |
+			     ((params->vd_pol & CCDC_VD_POL_MASK) <<
+			     CCDC_VD_POL_SHIFT));
+	}
+	regw(syn_mode, CCDC_SYN_MODE);
+
+	/* configure video window */
+	ccdc_setwin(&params->win, params->frm_fmt, 2);
+
+	/*
+	 * configure the order of y cb cr in SDRAM, and disable latch
+	 * internal register on vsync
+	 */
+	if (ccdc_cfg.if_type == VPFE_BT656_10BIT)
+		regw((params->pix_order << CCDC_CCDCFG_Y8POS_SHIFT) |
+			CCDC_LATCH_ON_VSYNC_DISABLE | CCDC_CCDCFG_BW656_10BIT,
+			CCDC_CCDCFG);
+	else
+		regw((params->pix_order << CCDC_CCDCFG_Y8POS_SHIFT) |
+			CCDC_LATCH_ON_VSYNC_DISABLE, CCDC_CCDCFG);
+
+	/*
+	 * configure the horizontal line offset. This should be a
+	 * on 32 byte boundary. So clear LSB 5 bits
+	 */
+	regw(((params->win.width * 2  + 31) & ~0x1f), CCDC_HSIZE_OFF);
+
+	/* configure the memory line offset */
+	if (params->buf_type == CCDC_BUFTYPE_FLD_INTERLEAVED)
+		/* two fields are interleaved in memory */
+		regw(CCDC_SDOFST_FIELD_INTERLEAVED, CCDC_SDOFST);
+
+	ccdc_sbl_reset();
+	dev_dbg(ccdc_cfg.dev, "\nEnd of ccdc_config_ycbcr...\n");
+}
+
+static void ccdc_config_black_clamp(struct ccdc_black_clamp *bclamp)
+{
+	u32 val;
+
+	if (!bclamp->enable) {
+		/* configure DCSub */
+		val = (bclamp->dc_sub) & CCDC_BLK_DC_SUB_MASK;
+		regw(val, CCDC_DCSUB);
+		dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to DCSUB...\n", val);
+		regw(CCDC_CLAMP_DEFAULT_VAL, CCDC_CLAMP);
+		dev_dbg(ccdc_cfg.dev, "\nWriting 0x0000 to CLAMP...\n");
+		return;
+	}
+	/*
+	 * Configure gain,  Start pixel, No of line to be avg,
+	 * No of pixel/line to be avg, & Enable the Black clamping
+	 */
+	val = ((bclamp->sgain & CCDC_BLK_SGAIN_MASK) |
+	       ((bclamp->start_pixel & CCDC_BLK_ST_PXL_MASK) <<
+		CCDC_BLK_ST_PXL_SHIFT) |
+	       ((bclamp->sample_ln & CCDC_BLK_SAMPLE_LINE_MASK) <<
+		CCDC_BLK_SAMPLE_LINE_SHIFT) |
+	       ((bclamp->sample_pixel & CCDC_BLK_SAMPLE_LN_MASK) <<
+		CCDC_BLK_SAMPLE_LN_SHIFT) | CCDC_BLK_CLAMP_ENABLE);
+	regw(val, CCDC_CLAMP);
+	dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to CLAMP...\n", val);
+	/* If Black clamping is enable then make dcsub 0 */
+	regw(CCDC_DCSUB_DEFAULT_VAL, CCDC_DCSUB);
+	dev_dbg(ccdc_cfg.dev, "\nWriting 0x00000000 to DCSUB...\n");
+}
+
+static void ccdc_config_black_compense(struct ccdc_black_compensation *bcomp)
+{
+	u32 val;
+
+	val = ((bcomp->b & CCDC_BLK_COMP_MASK) |
+	      ((bcomp->gb & CCDC_BLK_COMP_MASK) <<
+	       CCDC_BLK_COMP_GB_COMP_SHIFT) |
+	      ((bcomp->gr & CCDC_BLK_COMP_MASK) <<
+	       CCDC_BLK_COMP_GR_COMP_SHIFT) |
+	      ((bcomp->r & CCDC_BLK_COMP_MASK) <<
+	       CCDC_BLK_COMP_R_COMP_SHIFT));
+	regw(val, CCDC_BLKCMP);
+}
+
+static void ccdc_config_fpc(struct ccdc_fault_pixel *fpc)
+{
+	u32 val;
+
+	/* Initially disable FPC */
+	val = CCDC_FPC_DISABLE;
+	regw(val, CCDC_FPC);
+
+	if (!fpc->enable)
+		return;
+
+	/* Configure Fault pixel if needed */
+	regw(fpc->fpc_table_addr, CCDC_FPC_ADDR);
+	dev_dbg(ccdc_cfg.dev, "\nWriting 0x%lx to FPC_ADDR...\n",
+		       (fpc->fpc_table_addr));
+	/* Write the FPC params with FPC disable */
+	val = fpc->fp_num & CCDC_FPC_FPC_NUM_MASK;
+	regw(val, CCDC_FPC);
+
+	dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to FPC...\n", val);
+	/* read the FPC register */
+	val = regr(CCDC_FPC) | CCDC_FPC_ENABLE;
+	regw(val, CCDC_FPC);
+	dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to FPC...\n", val);
+}
+
+/*
+ * ccdc_config_raw()
+ * This function will configure CCDC for Raw capture mode
+ */
+static void ccdc_config_raw(void)
+{
+	struct ccdc_params_raw *params = &ccdc_cfg.bayer;
+	struct ccdc_config_params_raw *config_params =
+				&ccdc_cfg.bayer.config_params;
+	unsigned int syn_mode = 0;
+	unsigned int val;
+
+	dev_dbg(ccdc_cfg.dev, "\nStarting ccdc_config_raw...");
+
+	/*      Reset CCDC */
+	ccdc_restore_defaults();
+
+	/* Disable latching function registers on VSYNC  */
+	regw(CCDC_LATCH_ON_VSYNC_DISABLE, CCDC_CCDCFG);
+
+	/*
+	 * Configure the vertical sync polarity(SYN_MODE.VDPOL),
+	 * horizontal sync polarity (SYN_MODE.HDPOL), frame id polarity
+	 * (SYN_MODE.FLDPOL), frame format(progressive or interlace),
+	 * data size(SYNMODE.DATSIZ), &pixel format (Input mode), output
+	 * SDRAM, enable internal timing generator
+	 */
+	syn_mode =
+		(((params->vd_pol & CCDC_VD_POL_MASK) << CCDC_VD_POL_SHIFT) |
+		((params->hd_pol & CCDC_HD_POL_MASK) << CCDC_HD_POL_SHIFT) |
+		((params->fid_pol & CCDC_FID_POL_MASK) << CCDC_FID_POL_SHIFT) |
+		((params->frm_fmt & CCDC_FRM_FMT_MASK) << CCDC_FRM_FMT_SHIFT) |
+		((config_params->data_sz & CCDC_DATA_SZ_MASK) <<
+		CCDC_DATA_SZ_SHIFT) |
+		((params->pix_fmt & CCDC_PIX_FMT_MASK) << CCDC_PIX_FMT_SHIFT) |
+		CCDC_WEN_ENABLE | CCDC_VDHDEN_ENABLE);
+
+	/* Enable and configure aLaw register if needed */
+	if (config_params->alaw.enable) {
+		val = ((config_params->alaw.gamma_wd &
+		      CCDC_ALAW_GAMMA_WD_MASK) | CCDC_ALAW_ENABLE);
+		regw(val, CCDC_ALAW);
+		dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to ALAW...\n", val);
+	}
+
+	/* Configure video window */
+	ccdc_setwin(&params->win, params->frm_fmt, CCDC_PPC_RAW);
+
+	/* Configure Black Clamp */
+	ccdc_config_black_clamp(&config_params->blk_clamp);
+
+	/* Configure Black level compensation */
+	ccdc_config_black_compense(&config_params->blk_comp);
+
+	/* Configure Fault Pixel Correction */
+	ccdc_config_fpc(&config_params->fault_pxl);
+
+	/* If data size is 8 bit then pack the data */
+	if ((config_params->data_sz == CCDC_DATA_8BITS) ||
+	     config_params->alaw.enable)
+		syn_mode |= CCDC_DATA_PACK_ENABLE;
+
+	/* disable video port */
+	val = CCDC_DISABLE_VIDEO_PORT;
+
+	if (config_params->data_sz == CCDC_DATA_8BITS)
+		val |= (CCDC_DATA_10BITS & CCDC_FMTCFG_VPIN_MASK)
+		    << CCDC_FMTCFG_VPIN_SHIFT;
+	else
+		val |= (config_params->data_sz & CCDC_FMTCFG_VPIN_MASK)
+		    << CCDC_FMTCFG_VPIN_SHIFT;
+	/* Write value in FMTCFG */
+	regw(val, CCDC_FMTCFG);
+
+	dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to FMTCFG...\n", val);
+	/* Configure the color pattern according to mt9t001 sensor */
+	regw(CCDC_COLPTN_VAL, CCDC_COLPTN);
+
+	dev_dbg(ccdc_cfg.dev, "\nWriting 0xBB11BB11 to COLPTN...\n");
+	/*
+	 * Configure Data formatter(Video port) pixel selection
+	 * (FMT_HORZ, FMT_VERT)
+	 */
+	val = ((params->win.left & CCDC_FMT_HORZ_FMTSPH_MASK) <<
+	      CCDC_FMT_HORZ_FMTSPH_SHIFT) |
+	      (params->win.width & CCDC_FMT_HORZ_FMTLNH_MASK);
+	regw(val, CCDC_FMT_HORZ);
+
+	dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to FMT_HORZ...\n", val);
+	val = (params->win.top & CCDC_FMT_VERT_FMTSLV_MASK)
+	    << CCDC_FMT_VERT_FMTSLV_SHIFT;
+	if (params->frm_fmt == CCDC_FRMFMT_PROGRESSIVE)
+		val |= (params->win.height) & CCDC_FMT_VERT_FMTLNV_MASK;
+	else
+		val |= (params->win.height >> 1) & CCDC_FMT_VERT_FMTLNV_MASK;
+
+	dev_dbg(ccdc_cfg.dev, "\nparams->win.height  0x%x ...\n",
+	       params->win.height);
+	regw(val, CCDC_FMT_VERT);
+
+	dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to FMT_VERT...\n", val);
+
+	dev_dbg(ccdc_cfg.dev, "\nbelow regw(val, FMT_VERT)...");
+
+	/*
+	 * Configure Horizontal offset register. If pack 8 is enabled then
+	 * 1 pixel will take 1 byte
+	 */
+	if ((config_params->data_sz == CCDC_DATA_8BITS) ||
+	    config_params->alaw.enable)
+		regw((params->win.width + CCDC_32BYTE_ALIGN_VAL) &
+		    CCDC_HSIZE_OFF_MASK, CCDC_HSIZE_OFF);
+	else
+		/* else one pixel will take 2 byte */
+		regw(((params->win.width * CCDC_TWO_BYTES_PER_PIXEL) +
+		    CCDC_32BYTE_ALIGN_VAL) & CCDC_HSIZE_OFF_MASK,
+		    CCDC_HSIZE_OFF);
+
+	/* Set value for SDOFST */
+	if (params->frm_fmt == CCDC_FRMFMT_INTERLACED) {
+		if (params->image_invert_enable) {
+			/* For intelace inverse mode */
+			regw(CCDC_INTERLACED_IMAGE_INVERT, CCDC_SDOFST);
+			dev_dbg(ccdc_cfg.dev, "\nWriting 0x4B6D to SDOFST..\n");
+		}
+
+		else {
+			/* For intelace non inverse mode */
+			regw(CCDC_INTERLACED_NO_IMAGE_INVERT, CCDC_SDOFST);
+			dev_dbg(ccdc_cfg.dev, "\nWriting 0x0249 to SDOFST..\n");
+		}
+	} else if (params->frm_fmt == CCDC_FRMFMT_PROGRESSIVE) {
+		regw(CCDC_PROGRESSIVE_NO_IMAGE_INVERT, CCDC_SDOFST);
+		dev_dbg(ccdc_cfg.dev, "\nWriting 0x0000 to SDOFST...\n");
+	}
+
+	/*
+	 * Configure video port pixel selection (VPOUT)
+	 * Here -1 is to make the height value less than FMT_VERT.FMTLNV
+	 */
+	if (params->frm_fmt == CCDC_FRMFMT_PROGRESSIVE)
+		val = (((params->win.height - 1) & CCDC_VP_OUT_VERT_NUM_MASK))
+		    << CCDC_VP_OUT_VERT_NUM_SHIFT;
+	else
+		val =
+		    ((((params->win.height >> CCDC_INTERLACED_HEIGHT_SHIFT) -
+		     1) & CCDC_VP_OUT_VERT_NUM_MASK)) <<
+		    CCDC_VP_OUT_VERT_NUM_SHIFT;
+
+	val |= ((((params->win.width))) & CCDC_VP_OUT_HORZ_NUM_MASK)
+	    << CCDC_VP_OUT_HORZ_NUM_SHIFT;
+	val |= (params->win.left) & CCDC_VP_OUT_HORZ_ST_MASK;
+	regw(val, CCDC_VP_OUT);
+
+	dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to VP_OUT...\n", val);
+	regw(syn_mode, CCDC_SYN_MODE);
+	dev_dbg(ccdc_cfg.dev, "\nWriting 0x%x to SYN_MODE...\n", syn_mode);
+
+	ccdc_sbl_reset();
+	dev_dbg(ccdc_cfg.dev, "\nend of ccdc_config_raw...");
+	ccdc_readregs();
+}
+
+static int ccdc_configure(void)
+{
+	if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
+		ccdc_config_raw();
+	else
+		ccdc_config_ycbcr();
+	return 0;
+}
+
+static int ccdc_set_buftype(enum ccdc_buftype buf_type)
+{
+	if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
+		ccdc_cfg.bayer.buf_type = buf_type;
+	else
+		ccdc_cfg.ycbcr.buf_type = buf_type;
+	return 0;
+}
+
+static enum ccdc_buftype ccdc_get_buftype(void)
+{
+	if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
+		return ccdc_cfg.bayer.buf_type;
+	return ccdc_cfg.ycbcr.buf_type;
+}
+
+static int ccdc_enum_pix(u32 *pix, int i)
+{
+	int ret = -EINVAL;
+	if (ccdc_cfg.if_type == VPFE_RAW_BAYER) {
+		if (i < ARRAY_SIZE(ccdc_raw_bayer_pix_formats)) {
+			*pix = ccdc_raw_bayer_pix_formats[i];
+			ret = 0;
+		}
+	} else {
+		if (i < ARRAY_SIZE(ccdc_raw_yuv_pix_formats)) {
+			*pix = ccdc_raw_yuv_pix_formats[i];
+			ret = 0;
+		}
+	}
+	return ret;
+}
+
+static int ccdc_set_pixel_format(u32 pixfmt)
+{
+	if (ccdc_cfg.if_type == VPFE_RAW_BAYER) {
+		ccdc_cfg.bayer.pix_fmt = CCDC_PIXFMT_RAW;
+		if (pixfmt == V4L2_PIX_FMT_SBGGR8)
+			ccdc_cfg.bayer.config_params.alaw.enable = 1;
+		else if (pixfmt != V4L2_PIX_FMT_SBGGR16)
+			return -EINVAL;
+	} else {
+		if (pixfmt == V4L2_PIX_FMT_YUYV)
+			ccdc_cfg.ycbcr.pix_order = CCDC_PIXORDER_YCBYCR;
+		else if (pixfmt == V4L2_PIX_FMT_UYVY)
+			ccdc_cfg.ycbcr.pix_order = CCDC_PIXORDER_CBYCRY;
+		else
+			return -EINVAL;
+	}
+	return 0;
+}
+
+static u32 ccdc_get_pixel_format(void)
+{
+	struct ccdc_a_law *alaw = &ccdc_cfg.bayer.config_params.alaw;
+	u32 pixfmt;
+
+	if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
+		if (alaw->enable)
+			pixfmt = V4L2_PIX_FMT_SBGGR8;
+		else
+			pixfmt = V4L2_PIX_FMT_SBGGR16;
+	else {
+		if (ccdc_cfg.ycbcr.pix_order == CCDC_PIXORDER_YCBYCR)
+			pixfmt = V4L2_PIX_FMT_YUYV;
+		else
+			pixfmt = V4L2_PIX_FMT_UYVY;
+	}
+	return pixfmt;
+}
+
+static int ccdc_set_image_window(struct v4l2_rect *win)
+{
+	if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
+		ccdc_cfg.bayer.win = *win;
+	else
+		ccdc_cfg.ycbcr.win = *win;
+	return 0;
+}
+
+static void ccdc_get_image_window(struct v4l2_rect *win)
+{
+	if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
+		*win = ccdc_cfg.bayer.win;
+	else
+		*win = ccdc_cfg.ycbcr.win;
+}
+
+static unsigned int ccdc_get_line_length(void)
+{
+	struct ccdc_config_params_raw *config_params =
+				&ccdc_cfg.bayer.config_params;
+	unsigned int len;
+
+	if (ccdc_cfg.if_type == VPFE_RAW_BAYER) {
+		if ((config_params->alaw.enable) ||
+		    (config_params->data_sz == CCDC_DATA_8BITS))
+			len = ccdc_cfg.bayer.win.width;
+		else
+			len = ccdc_cfg.bayer.win.width * 2;
+	} else
+		len = ccdc_cfg.ycbcr.win.width * 2;
+	return ALIGN(len, 32);
+}
+
+static int ccdc_set_frame_format(enum ccdc_frmfmt frm_fmt)
+{
+	if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
+		ccdc_cfg.bayer.frm_fmt = frm_fmt;
+	else
+		ccdc_cfg.ycbcr.frm_fmt = frm_fmt;
+	return 0;
+}
+
+static enum ccdc_frmfmt ccdc_get_frame_format(void)
+{
+	if (ccdc_cfg.if_type == VPFE_RAW_BAYER)
+		return ccdc_cfg.bayer.frm_fmt;
+	else
+		return ccdc_cfg.ycbcr.frm_fmt;
+}
+
+static int ccdc_getfid(void)
+{
+	return (regr(CCDC_SYN_MODE) >> 15) & 1;
+}
+
+/* misc operations */
+static inline void ccdc_setfbaddr(unsigned long addr)
+{
+	regw(addr & 0xffffffe0, CCDC_SDR_ADDR);
+}
+
+static int ccdc_set_hw_if_params(struct vpfe_hw_if_param *params)
+{
+	ccdc_cfg.if_type = params->if_type;
+
+	switch (params->if_type) {
+	case VPFE_BT656:
+	case VPFE_YCBCR_SYNC_16:
+	case VPFE_YCBCR_SYNC_8:
+	case VPFE_BT656_10BIT:
+		ccdc_cfg.ycbcr.vd_pol = params->vdpol;
+		ccdc_cfg.ycbcr.hd_pol = params->hdpol;
+		break;
+	default:
+		/* TODO add support for raw bayer here */
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static void ccdc_save_context(void)
+{
+	ccdc_ctx[CCDC_PCR >> 2] = regr(CCDC_PCR);
+	ccdc_ctx[CCDC_SYN_MODE >> 2] = regr(CCDC_SYN_MODE);
+	ccdc_ctx[CCDC_HD_VD_WID >> 2] = regr(CCDC_HD_VD_WID);
+	ccdc_ctx[CCDC_PIX_LINES >> 2] = regr(CCDC_PIX_LINES);
+	ccdc_ctx[CCDC_HORZ_INFO >> 2] = regr(CCDC_HORZ_INFO);
+	ccdc_ctx[CCDC_VERT_START >> 2] = regr(CCDC_VERT_START);
+	ccdc_ctx[CCDC_VERT_LINES >> 2] = regr(CCDC_VERT_LINES);
+	ccdc_ctx[CCDC_CULLING >> 2] = regr(CCDC_CULLING);
+	ccdc_ctx[CCDC_HSIZE_OFF >> 2] = regr(CCDC_HSIZE_OFF);
+	ccdc_ctx[CCDC_SDOFST >> 2] = regr(CCDC_SDOFST);
+	ccdc_ctx[CCDC_SDR_ADDR >> 2] = regr(CCDC_SDR_ADDR);
+	ccdc_ctx[CCDC_CLAMP >> 2] = regr(CCDC_CLAMP);
+	ccdc_ctx[CCDC_DCSUB >> 2] = regr(CCDC_DCSUB);
+	ccdc_ctx[CCDC_COLPTN >> 2] = regr(CCDC_COLPTN);
+	ccdc_ctx[CCDC_BLKCMP >> 2] = regr(CCDC_BLKCMP);
+	ccdc_ctx[CCDC_FPC >> 2] = regr(CCDC_FPC);
+	ccdc_ctx[CCDC_FPC_ADDR >> 2] = regr(CCDC_FPC_ADDR);
+	ccdc_ctx[CCDC_VDINT >> 2] = regr(CCDC_VDINT);
+	ccdc_ctx[CCDC_ALAW >> 2] = regr(CCDC_ALAW);
+	ccdc_ctx[CCDC_REC656IF >> 2] = regr(CCDC_REC656IF);
+	ccdc_ctx[CCDC_CCDCFG >> 2] = regr(CCDC_CCDCFG);
+	ccdc_ctx[CCDC_FMTCFG >> 2] = regr(CCDC_FMTCFG);
+	ccdc_ctx[CCDC_FMT_HORZ >> 2] = regr(CCDC_FMT_HORZ);
+	ccdc_ctx[CCDC_FMT_VERT >> 2] = regr(CCDC_FMT_VERT);
+	ccdc_ctx[CCDC_FMT_ADDR0 >> 2] = regr(CCDC_FMT_ADDR0);
+	ccdc_ctx[CCDC_FMT_ADDR1 >> 2] = regr(CCDC_FMT_ADDR1);
+	ccdc_ctx[CCDC_FMT_ADDR2 >> 2] = regr(CCDC_FMT_ADDR2);
+	ccdc_ctx[CCDC_FMT_ADDR3 >> 2] = regr(CCDC_FMT_ADDR3);
+	ccdc_ctx[CCDC_FMT_ADDR4 >> 2] = regr(CCDC_FMT_ADDR4);
+	ccdc_ctx[CCDC_FMT_ADDR5 >> 2] = regr(CCDC_FMT_ADDR5);
+	ccdc_ctx[CCDC_FMT_ADDR6 >> 2] = regr(CCDC_FMT_ADDR6);
+	ccdc_ctx[CCDC_FMT_ADDR7 >> 2] = regr(CCDC_FMT_ADDR7);
+	ccdc_ctx[CCDC_PRGEVEN_0 >> 2] = regr(CCDC_PRGEVEN_0);
+	ccdc_ctx[CCDC_PRGEVEN_1 >> 2] = regr(CCDC_PRGEVEN_1);
+	ccdc_ctx[CCDC_PRGODD_0 >> 2] = regr(CCDC_PRGODD_0);
+	ccdc_ctx[CCDC_PRGODD_1 >> 2] = regr(CCDC_PRGODD_1);
+	ccdc_ctx[CCDC_VP_OUT >> 2] = regr(CCDC_VP_OUT);
+}
+
+static void ccdc_restore_context(void)
+{
+	regw(ccdc_ctx[CCDC_SYN_MODE >> 2], CCDC_SYN_MODE);
+	regw(ccdc_ctx[CCDC_HD_VD_WID >> 2], CCDC_HD_VD_WID);
+	regw(ccdc_ctx[CCDC_PIX_LINES >> 2], CCDC_PIX_LINES);
+	regw(ccdc_ctx[CCDC_HORZ_INFO >> 2], CCDC_HORZ_INFO);
+	regw(ccdc_ctx[CCDC_VERT_START >> 2], CCDC_VERT_START);
+	regw(ccdc_ctx[CCDC_VERT_LINES >> 2], CCDC_VERT_LINES);
+	regw(ccdc_ctx[CCDC_CULLING >> 2], CCDC_CULLING);
+	regw(ccdc_ctx[CCDC_HSIZE_OFF >> 2], CCDC_HSIZE_OFF);
+	regw(ccdc_ctx[CCDC_SDOFST >> 2], CCDC_SDOFST);
+	regw(ccdc_ctx[CCDC_SDR_ADDR >> 2], CCDC_SDR_ADDR);
+	regw(ccdc_ctx[CCDC_CLAMP >> 2], CCDC_CLAMP);
+	regw(ccdc_ctx[CCDC_DCSUB >> 2], CCDC_DCSUB);
+	regw(ccdc_ctx[CCDC_COLPTN >> 2], CCDC_COLPTN);
+	regw(ccdc_ctx[CCDC_BLKCMP >> 2], CCDC_BLKCMP);
+	regw(ccdc_ctx[CCDC_FPC >> 2], CCDC_FPC);
+	regw(ccdc_ctx[CCDC_FPC_ADDR >> 2], CCDC_FPC_ADDR);
+	regw(ccdc_ctx[CCDC_VDINT >> 2], CCDC_VDINT);
+	regw(ccdc_ctx[CCDC_ALAW >> 2], CCDC_ALAW);
+	regw(ccdc_ctx[CCDC_REC656IF >> 2], CCDC_REC656IF);
+	regw(ccdc_ctx[CCDC_CCDCFG >> 2], CCDC_CCDCFG);
+	regw(ccdc_ctx[CCDC_FMTCFG >> 2], CCDC_FMTCFG);
+	regw(ccdc_ctx[CCDC_FMT_HORZ >> 2], CCDC_FMT_HORZ);
+	regw(ccdc_ctx[CCDC_FMT_VERT >> 2], CCDC_FMT_VERT);
+	regw(ccdc_ctx[CCDC_FMT_ADDR0 >> 2], CCDC_FMT_ADDR0);
+	regw(ccdc_ctx[CCDC_FMT_ADDR1 >> 2], CCDC_FMT_ADDR1);
+	regw(ccdc_ctx[CCDC_FMT_ADDR2 >> 2], CCDC_FMT_ADDR2);
+	regw(ccdc_ctx[CCDC_FMT_ADDR3 >> 2], CCDC_FMT_ADDR3);
+	regw(ccdc_ctx[CCDC_FMT_ADDR4 >> 2], CCDC_FMT_ADDR4);
+	regw(ccdc_ctx[CCDC_FMT_ADDR5 >> 2], CCDC_FMT_ADDR5);
+	regw(ccdc_ctx[CCDC_FMT_ADDR6 >> 2], CCDC_FMT_ADDR6);
+	regw(ccdc_ctx[CCDC_FMT_ADDR7 >> 2], CCDC_FMT_ADDR7);
+	regw(ccdc_ctx[CCDC_PRGEVEN_0 >> 2], CCDC_PRGEVEN_0);
+	regw(ccdc_ctx[CCDC_PRGEVEN_1 >> 2], CCDC_PRGEVEN_1);
+	regw(ccdc_ctx[CCDC_PRGODD_0 >> 2], CCDC_PRGODD_0);
+	regw(ccdc_ctx[CCDC_PRGODD_1 >> 2], CCDC_PRGODD_1);
+	regw(ccdc_ctx[CCDC_VP_OUT >> 2], CCDC_VP_OUT);
+	regw(ccdc_ctx[CCDC_PCR >> 2], CCDC_PCR);
+}
+static struct ccdc_hw_device ccdc_hw_dev = {
+	.name = "DM6446 CCDC",
+	.owner = THIS_MODULE,
+	.hw_ops = {
+		.open = ccdc_open,
+		.close = ccdc_close,
+		.reset = ccdc_sbl_reset,
+		.enable = ccdc_enable,
+		.set_hw_if_params = ccdc_set_hw_if_params,
+		.set_params = ccdc_set_params,
+		.configure = ccdc_configure,
+		.set_buftype = ccdc_set_buftype,
+		.get_buftype = ccdc_get_buftype,
+		.enum_pix = ccdc_enum_pix,
+		.set_pixel_format = ccdc_set_pixel_format,
+		.get_pixel_format = ccdc_get_pixel_format,
+		.set_frame_format = ccdc_set_frame_format,
+		.get_frame_format = ccdc_get_frame_format,
+		.set_image_window = ccdc_set_image_window,
+		.get_image_window = ccdc_get_image_window,
+		.get_line_length = ccdc_get_line_length,
+		.setfbaddr = ccdc_setfbaddr,
+		.getfid = ccdc_getfid,
+	},
+};
+
+static int dm644x_ccdc_probe(struct platform_device *pdev)
+{
+	struct resource	*res;
+	int status = 0;
+
+	/*
+	 * first try to register with vpfe. If not correct platform, then we
+	 * don't have to iomap
+	 */
+	status = vpfe_register_ccdc_device(&ccdc_hw_dev);
+	if (status < 0)
+		return status;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		status = -ENODEV;
+		goto fail_nores;
+	}
+
+	res = request_mem_region(res->start, resource_size(res), res->name);
+	if (!res) {
+		status = -EBUSY;
+		goto fail_nores;
+	}
+
+	ccdc_cfg.base_addr = ioremap_nocache(res->start, resource_size(res));
+	if (!ccdc_cfg.base_addr) {
+		status = -ENOMEM;
+		goto fail_nomem;
+	}
+
+	ccdc_cfg.dev = &pdev->dev;
+	printk(KERN_NOTICE "%s is registered with vpfe.\n", ccdc_hw_dev.name);
+	return 0;
+fail_nomem:
+	release_mem_region(res->start, resource_size(res));
+fail_nores:
+	vpfe_unregister_ccdc_device(&ccdc_hw_dev);
+	return status;
+}
+
+static int dm644x_ccdc_remove(struct platform_device *pdev)
+{
+	struct resource	*res;
+
+	iounmap(ccdc_cfg.base_addr);
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res)
+		release_mem_region(res->start, resource_size(res));
+	vpfe_unregister_ccdc_device(&ccdc_hw_dev);
+	return 0;
+}
+
+static int dm644x_ccdc_suspend(struct device *dev)
+{
+	/* Save CCDC context */
+	ccdc_save_context();
+	/* Disable CCDC */
+	ccdc_enable(0);
+
+	return 0;
+}
+
+static int dm644x_ccdc_resume(struct device *dev)
+{
+	/* Restore CCDC context */
+	ccdc_restore_context();
+
+	return 0;
+}
+
+static const struct dev_pm_ops dm644x_ccdc_pm_ops = {
+	.suspend = dm644x_ccdc_suspend,
+	.resume = dm644x_ccdc_resume,
+};
+
+static struct platform_driver dm644x_ccdc_driver = {
+	.driver = {
+		.name	= "dm644x_ccdc",
+		.pm = &dm644x_ccdc_pm_ops,
+	},
+	.remove = dm644x_ccdc_remove,
+	.probe = dm644x_ccdc_probe,
+};
+
+module_platform_driver(dm644x_ccdc_driver);
diff --git a/drivers/media/platform/davinci/dm644x_ccdc_regs.h b/drivers/media/platform/davinci/dm644x_ccdc_regs.h
new file mode 100644
index 000000000..2b0aca538
--- /dev/null
+++ b/drivers/media/platform/davinci/dm644x_ccdc_regs.h
@@ -0,0 +1,153 @@
+/*
+ * Copyright (C) 2006-2009 Texas Instruments Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef _DM644X_CCDC_REGS_H
+#define _DM644X_CCDC_REGS_H
+
+/**************************************************************************\
+* Register OFFSET Definitions
+\**************************************************************************/
+#define CCDC_PID				0x0
+#define CCDC_PCR				0x4
+#define CCDC_SYN_MODE				0x8
+#define CCDC_HD_VD_WID				0xc
+#define CCDC_PIX_LINES				0x10
+#define CCDC_HORZ_INFO				0x14
+#define CCDC_VERT_START				0x18
+#define CCDC_VERT_LINES				0x1c
+#define CCDC_CULLING				0x20
+#define CCDC_HSIZE_OFF				0x24
+#define CCDC_SDOFST				0x28
+#define CCDC_SDR_ADDR				0x2c
+#define CCDC_CLAMP				0x30
+#define CCDC_DCSUB				0x34
+#define CCDC_COLPTN				0x38
+#define CCDC_BLKCMP				0x3c
+#define CCDC_FPC				0x40
+#define CCDC_FPC_ADDR				0x44
+#define CCDC_VDINT				0x48
+#define CCDC_ALAW				0x4c
+#define CCDC_REC656IF				0x50
+#define CCDC_CCDCFG				0x54
+#define CCDC_FMTCFG				0x58
+#define CCDC_FMT_HORZ				0x5c
+#define CCDC_FMT_VERT				0x60
+#define CCDC_FMT_ADDR0				0x64
+#define CCDC_FMT_ADDR1				0x68
+#define CCDC_FMT_ADDR2				0x6c
+#define CCDC_FMT_ADDR3				0x70
+#define CCDC_FMT_ADDR4				0x74
+#define CCDC_FMT_ADDR5				0x78
+#define CCDC_FMT_ADDR6				0x7c
+#define CCDC_FMT_ADDR7				0x80
+#define CCDC_PRGEVEN_0				0x84
+#define CCDC_PRGEVEN_1				0x88
+#define CCDC_PRGODD_0				0x8c
+#define CCDC_PRGODD_1				0x90
+#define CCDC_VP_OUT				0x94
+#define CCDC_REG_END				0x98
+
+/***************************************************************
+*	Define for various register bit mask and shifts for CCDC
+****************************************************************/
+#define CCDC_FID_POL_MASK			1
+#define CCDC_FID_POL_SHIFT			4
+#define CCDC_HD_POL_MASK			1
+#define CCDC_HD_POL_SHIFT			3
+#define CCDC_VD_POL_MASK			1
+#define CCDC_VD_POL_SHIFT			2
+#define CCDC_HSIZE_OFF_MASK			0xffffffe0
+#define CCDC_32BYTE_ALIGN_VAL			31
+#define CCDC_FRM_FMT_MASK			0x1
+#define CCDC_FRM_FMT_SHIFT			7
+#define CCDC_DATA_SZ_MASK			7
+#define CCDC_DATA_SZ_SHIFT			8
+#define CCDC_PIX_FMT_MASK			3
+#define CCDC_PIX_FMT_SHIFT			12
+#define CCDC_VP2SDR_DISABLE			0xFFFBFFFF
+#define CCDC_WEN_ENABLE				(1 << 17)
+#define CCDC_SDR2RSZ_DISABLE			0xFFF7FFFF
+#define CCDC_VDHDEN_ENABLE			(1 << 16)
+#define CCDC_LPF_ENABLE				(1 << 14)
+#define CCDC_ALAW_ENABLE			(1 << 3)
+#define CCDC_ALAW_GAMMA_WD_MASK			7
+#define CCDC_BLK_CLAMP_ENABLE			(1 << 31)
+#define CCDC_BLK_SGAIN_MASK			0x1F
+#define CCDC_BLK_ST_PXL_MASK			0x7FFF
+#define CCDC_BLK_ST_PXL_SHIFT			10
+#define CCDC_BLK_SAMPLE_LN_MASK			7
+#define CCDC_BLK_SAMPLE_LN_SHIFT		28
+#define CCDC_BLK_SAMPLE_LINE_MASK		7
+#define CCDC_BLK_SAMPLE_LINE_SHIFT		25
+#define CCDC_BLK_DC_SUB_MASK			0x03FFF
+#define CCDC_BLK_COMP_MASK			0xFF
+#define CCDC_BLK_COMP_GB_COMP_SHIFT		8
+#define CCDC_BLK_COMP_GR_COMP_SHIFT		16
+#define CCDC_BLK_COMP_R_COMP_SHIFT		24
+#define CCDC_LATCH_ON_VSYNC_DISABLE		(1 << 15)
+#define CCDC_FPC_ENABLE				(1 << 15)
+#define CCDC_FPC_DISABLE			0
+#define CCDC_FPC_FPC_NUM_MASK 			0x7FFF
+#define CCDC_DATA_PACK_ENABLE			(1 << 11)
+#define CCDC_FMTCFG_VPIN_MASK			7
+#define CCDC_FMTCFG_VPIN_SHIFT			12
+#define CCDC_FMT_HORZ_FMTLNH_MASK		0x1FFF
+#define CCDC_FMT_HORZ_FMTSPH_MASK		0x1FFF
+#define CCDC_FMT_HORZ_FMTSPH_SHIFT		16
+#define CCDC_FMT_VERT_FMTLNV_MASK		0x1FFF
+#define CCDC_FMT_VERT_FMTSLV_MASK		0x1FFF
+#define CCDC_FMT_VERT_FMTSLV_SHIFT		16
+#define CCDC_VP_OUT_VERT_NUM_MASK		0x3FFF
+#define CCDC_VP_OUT_VERT_NUM_SHIFT		17
+#define CCDC_VP_OUT_HORZ_NUM_MASK		0x1FFF
+#define CCDC_VP_OUT_HORZ_NUM_SHIFT		4
+#define CCDC_VP_OUT_HORZ_ST_MASK		0xF
+#define CCDC_HORZ_INFO_SPH_SHIFT		16
+#define CCDC_VERT_START_SLV0_SHIFT		16
+#define CCDC_VDINT_VDINT0_SHIFT			16
+#define CCDC_VDINT_VDINT1_MASK			0xFFFF
+#define CCDC_PPC_RAW				1
+#define CCDC_DCSUB_DEFAULT_VAL			0
+#define CCDC_CLAMP_DEFAULT_VAL			0
+#define CCDC_ENABLE_VIDEO_PORT			0x8000
+#define CCDC_DISABLE_VIDEO_PORT			0
+#define CCDC_COLPTN_VAL				0xBB11BB11
+#define CCDC_TWO_BYTES_PER_PIXEL		2
+#define CCDC_INTERLACED_IMAGE_INVERT		0x4B6D
+#define CCDC_INTERLACED_NO_IMAGE_INVERT		0x0249
+#define CCDC_PROGRESSIVE_IMAGE_INVERT		0x4000
+#define CCDC_PROGRESSIVE_NO_IMAGE_INVERT	0
+#define CCDC_INTERLACED_HEIGHT_SHIFT		1
+#define CCDC_SYN_MODE_INPMOD_SHIFT		12
+#define CCDC_SYN_MODE_INPMOD_MASK		3
+#define CCDC_SYN_MODE_8BITS			(7 << 8)
+#define CCDC_SYN_MODE_10BITS			(6 << 8)
+#define CCDC_SYN_MODE_11BITS			(5 << 8)
+#define CCDC_SYN_MODE_12BITS			(4 << 8)
+#define CCDC_SYN_MODE_13BITS			(3 << 8)
+#define CCDC_SYN_MODE_14BITS			(2 << 8)
+#define CCDC_SYN_MODE_15BITS			(1 << 8)
+#define CCDC_SYN_MODE_16BITS			(0 << 8)
+#define CCDC_SYN_FLDMODE_MASK			1
+#define CCDC_SYN_FLDMODE_SHIFT			7
+#define CCDC_REC656IF_BT656_EN			3
+#define CCDC_SYN_MODE_VD_POL_NEGATIVE		(1 << 2)
+#define CCDC_CCDCFG_Y8POS_SHIFT			11
+#define CCDC_CCDCFG_BW656_10BIT 		(1 << 5)
+#define CCDC_SDOFST_FIELD_INTERLEAVED		0x249
+#define CCDC_NO_CULLING				0xffff00ff
+#endif
diff --git a/drivers/media/platform/davinci/isif.c b/drivers/media/platform/davinci/isif.c
new file mode 100644
index 000000000..99faea2e8
--- /dev/null
+++ b/drivers/media/platform/davinci/isif.c
@@ -0,0 +1,1144 @@
+/*
+ * Copyright (C) 2008-2009 Texas Instruments Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ * Image Sensor Interface (ISIF) driver
+ *
+ * This driver is for configuring the ISIF IP available on DM365 or any other
+ * TI SoCs. This is used for capturing yuv or bayer video or image data
+ * from a decoder or sensor. This IP is similar to the CCDC IP on DM355
+ * and DM6446, but with enhanced or additional ip blocks. The driver
+ * configures the ISIF upon commands from the vpfe bridge driver through
+ * ccdc_hw_device interface.
+ *
+ * TODO: 1) Raw bayer parameter settings and bayer capture
+ *	 2) Add support for control ioctl
+ */
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
+#include <linux/videodev2.h>
+#include <linux/err.h>
+#include <linux/module.h>
+
+#include <mach/mux.h>
+
+#include <media/davinci/isif.h>
+#include <media/davinci/vpss.h>
+
+#include "isif_regs.h"
+#include "ccdc_hw_device.h"
+
+/* Defaults for module configuration parameters */
+static struct isif_config_params_raw isif_config_defaults = {
+	.linearize = {
+		.en = 0,
+		.corr_shft = ISIF_NO_SHIFT,
+		.scale_fact = {1, 0},
+	},
+	.df_csc = {
+		.df_or_csc = 0,
+		.csc = {
+			.en = 0,
+		},
+	},
+	.dfc = {
+		.en = 0,
+	},
+	.bclamp = {
+		.en = 0,
+	},
+	.gain_offset = {
+		.gain = {
+			.r_ye = {1, 0},
+			.gr_cy = {1, 0},
+			.gb_g = {1, 0},
+			.b_mg = {1, 0},
+		},
+	},
+	.culling = {
+		.hcpat_odd = 0xff,
+		.hcpat_even = 0xff,
+		.vcpat = 0xff,
+	},
+	.compress = {
+		.alg = ISIF_ALAW,
+	},
+};
+
+/* ISIF operation configuration */
+static struct isif_oper_config {
+	struct device *dev;
+	enum vpfe_hw_if_type if_type;
+	struct isif_ycbcr_config ycbcr;
+	struct isif_params_raw bayer;
+	enum isif_data_pack data_pack;
+	/* ISIF base address */
+	void __iomem *base_addr;
+	/* ISIF Linear Table 0 */
+	void __iomem *linear_tbl0_addr;
+	/* ISIF Linear Table 1 */
+	void __iomem *linear_tbl1_addr;
+} isif_cfg = {
+	.ycbcr = {
+		.pix_fmt = CCDC_PIXFMT_YCBCR_8BIT,
+		.frm_fmt = CCDC_FRMFMT_INTERLACED,
+		.win = ISIF_WIN_NTSC,
+		.fid_pol = VPFE_PINPOL_POSITIVE,
+		.vd_pol = VPFE_PINPOL_POSITIVE,
+		.hd_pol = VPFE_PINPOL_POSITIVE,
+		.pix_order = CCDC_PIXORDER_CBYCRY,
+		.buf_type = CCDC_BUFTYPE_FLD_INTERLEAVED,
+	},
+	.bayer = {
+		.pix_fmt = CCDC_PIXFMT_RAW,
+		.frm_fmt = CCDC_FRMFMT_PROGRESSIVE,
+		.win = ISIF_WIN_VGA,
+		.fid_pol = VPFE_PINPOL_POSITIVE,
+		.vd_pol = VPFE_PINPOL_POSITIVE,
+		.hd_pol = VPFE_PINPOL_POSITIVE,
+		.gain = {
+			.r_ye = {1, 0},
+			.gr_cy = {1, 0},
+			.gb_g = {1, 0},
+			.b_mg = {1, 0},
+		},
+		.cfa_pat = ISIF_CFA_PAT_MOSAIC,
+		.data_msb = ISIF_BIT_MSB_11,
+		.config_params = {
+			.data_shift = ISIF_NO_SHIFT,
+			.col_pat_field0 = {
+				.olop = ISIF_GREEN_BLUE,
+				.olep = ISIF_BLUE,
+				.elop = ISIF_RED,
+				.elep = ISIF_GREEN_RED,
+			},
+			.col_pat_field1 = {
+				.olop = ISIF_GREEN_BLUE,
+				.olep = ISIF_BLUE,
+				.elop = ISIF_RED,
+				.elep = ISIF_GREEN_RED,
+			},
+			.test_pat_gen = 0,
+		},
+	},
+	.data_pack = ISIF_DATA_PACK8,
+};
+
+/* Raw Bayer formats */
+static const u32 isif_raw_bayer_pix_formats[] = {
+	V4L2_PIX_FMT_SBGGR8, V4L2_PIX_FMT_SBGGR16};
+
+/* Raw YUV formats */
+static const u32 isif_raw_yuv_pix_formats[] = {
+	V4L2_PIX_FMT_UYVY, V4L2_PIX_FMT_YUYV};
+
+/* register access routines */
+static inline u32 regr(u32 offset)
+{
+	return __raw_readl(isif_cfg.base_addr + offset);
+}
+
+static inline void regw(u32 val, u32 offset)
+{
+	__raw_writel(val, isif_cfg.base_addr + offset);
+}
+
+/* reg_modify() - read, modify and write register */
+static inline u32 reg_modify(u32 mask, u32 val, u32 offset)
+{
+	u32 new_val = (regr(offset) & ~mask) | (val & mask);
+
+	regw(new_val, offset);
+	return new_val;
+}
+
+static inline void regw_lin_tbl(u32 val, u32 offset, int i)
+{
+	if (!i)
+		__raw_writel(val, isif_cfg.linear_tbl0_addr + offset);
+	else
+		__raw_writel(val, isif_cfg.linear_tbl1_addr + offset);
+}
+
+static void isif_disable_all_modules(void)
+{
+	/* disable BC */
+	regw(0, CLAMPCFG);
+	/* disable vdfc */
+	regw(0, DFCCTL);
+	/* disable CSC */
+	regw(0, CSCCTL);
+	/* disable linearization */
+	regw(0, LINCFG0);
+	/* disable other modules here as they are supported */
+}
+
+static void isif_enable(int en)
+{
+	if (!en) {
+		/* Before disable isif, disable all ISIF modules */
+		isif_disable_all_modules();
+		/*
+		 * wait for next VD. Assume lowest scan rate is 12 Hz. So
+		 * 100 msec delay is good enough
+		 */
+		msleep(100);
+	}
+	reg_modify(ISIF_SYNCEN_VDHDEN_MASK, en, SYNCEN);
+}
+
+static void isif_enable_output_to_sdram(int en)
+{
+	reg_modify(ISIF_SYNCEN_WEN_MASK, en << ISIF_SYNCEN_WEN_SHIFT, SYNCEN);
+}
+
+static void isif_config_culling(struct isif_cul *cul)
+{
+	u32 val;
+
+	/* Horizontal pattern */
+	val = (cul->hcpat_even << CULL_PAT_EVEN_LINE_SHIFT) | cul->hcpat_odd;
+	regw(val, CULH);
+
+	/* vertical pattern */
+	regw(cul->vcpat, CULV);
+
+	/* LPF */
+	reg_modify(ISIF_LPF_MASK << ISIF_LPF_SHIFT,
+		  cul->en_lpf << ISIF_LPF_SHIFT, MODESET);
+}
+
+static void isif_config_gain_offset(void)
+{
+	struct isif_gain_offsets_adj *gain_off_p =
+		&isif_cfg.bayer.config_params.gain_offset;
+	u32 val;
+
+	val = (!!gain_off_p->gain_sdram_en << GAIN_SDRAM_EN_SHIFT) |
+	      (!!gain_off_p->gain_ipipe_en << GAIN_IPIPE_EN_SHIFT) |
+	      (!!gain_off_p->gain_h3a_en << GAIN_H3A_EN_SHIFT) |
+	      (!!gain_off_p->offset_sdram_en << OFST_SDRAM_EN_SHIFT) |
+	      (!!gain_off_p->offset_ipipe_en << OFST_IPIPE_EN_SHIFT) |
+	      (!!gain_off_p->offset_h3a_en << OFST_H3A_EN_SHIFT);
+
+	reg_modify(GAIN_OFFSET_EN_MASK, val, CGAMMAWD);
+
+	val = (gain_off_p->gain.r_ye.integer << GAIN_INTEGER_SHIFT) |
+	       gain_off_p->gain.r_ye.decimal;
+	regw(val, CRGAIN);
+
+	val = (gain_off_p->gain.gr_cy.integer << GAIN_INTEGER_SHIFT) |
+	       gain_off_p->gain.gr_cy.decimal;
+	regw(val, CGRGAIN);
+
+	val = (gain_off_p->gain.gb_g.integer << GAIN_INTEGER_SHIFT) |
+	       gain_off_p->gain.gb_g.decimal;
+	regw(val, CGBGAIN);
+
+	val = (gain_off_p->gain.b_mg.integer << GAIN_INTEGER_SHIFT) |
+	       gain_off_p->gain.b_mg.decimal;
+	regw(val, CBGAIN);
+
+	regw(gain_off_p->offset, COFSTA);
+}
+
+static void isif_restore_defaults(void)
+{
+	enum vpss_ccdc_source_sel source = VPSS_CCDCIN;
+
+	dev_dbg(isif_cfg.dev, "\nstarting isif_restore_defaults...");
+	isif_cfg.bayer.config_params = isif_config_defaults;
+	/* Enable clock to ISIF, IPIPEIF and BL */
+	vpss_enable_clock(VPSS_CCDC_CLOCK, 1);
+	vpss_enable_clock(VPSS_IPIPEIF_CLOCK, 1);
+	vpss_enable_clock(VPSS_BL_CLOCK, 1);
+	/* Set default offset and gain */
+	isif_config_gain_offset();
+	vpss_select_ccdc_source(source);
+	dev_dbg(isif_cfg.dev, "\nEnd of isif_restore_defaults...");
+}
+
+static int isif_open(struct device *device)
+{
+	isif_restore_defaults();
+	return 0;
+}
+
+/* This function will configure the window size to be capture in ISIF reg */
+static void isif_setwin(struct v4l2_rect *image_win,
+			enum ccdc_frmfmt frm_fmt, int ppc)
+{
+	int horz_start, horz_nr_pixels;
+	int vert_start, vert_nr_lines;
+	int mid_img = 0;
+
+	dev_dbg(isif_cfg.dev, "\nStarting isif_setwin...");
+	/*
+	 * ppc - per pixel count. indicates how many pixels per cell
+	 * output to SDRAM. example, for ycbcr, it is one y and one c, so 2.
+	 * raw capture this is 1
+	 */
+	horz_start = image_win->left << (ppc - 1);
+	horz_nr_pixels = ((image_win->width) << (ppc - 1)) - 1;
+
+	/* Writing the horizontal info into the registers */
+	regw(horz_start & START_PX_HOR_MASK, SPH);
+	regw(horz_nr_pixels & NUM_PX_HOR_MASK, LNH);
+	vert_start = image_win->top;
+
+	if (frm_fmt == CCDC_FRMFMT_INTERLACED) {
+		vert_nr_lines = (image_win->height >> 1) - 1;
+		vert_start >>= 1;
+		/* To account for VD since line 0 doesn't have any data */
+		vert_start += 1;
+	} else {
+		/* To account for VD since line 0 doesn't have any data */
+		vert_start += 1;
+		vert_nr_lines = image_win->height - 1;
+		/* configure VDINT0 and VDINT1 */
+		mid_img = vert_start + (image_win->height / 2);
+		regw(mid_img, VDINT1);
+	}
+
+	regw(0, VDINT0);
+	regw(vert_start & START_VER_ONE_MASK, SLV0);
+	regw(vert_start & START_VER_TWO_MASK, SLV1);
+	regw(vert_nr_lines & NUM_LINES_VER, LNV);
+}
+
+static void isif_config_bclamp(struct isif_black_clamp *bc)
+{
+	u32 val;
+
+	/*
+	 * DC Offset is always added to image data irrespective of bc enable
+	 * status
+	 */
+	regw(bc->dc_offset, CLDCOFST);
+
+	if (bc->en) {
+		val = bc->bc_mode_color << ISIF_BC_MODE_COLOR_SHIFT;
+
+		/* Enable BC and horizontal clamp caculation paramaters */
+		val = val | 1 | (bc->horz.mode << ISIF_HORZ_BC_MODE_SHIFT);
+
+		regw(val, CLAMPCFG);
+
+		if (bc->horz.mode != ISIF_HORZ_BC_DISABLE) {
+			/*
+			 * Window count for calculation
+			 * Base window selection
+			 * pixel limit
+			 * Horizontal size of window
+			 * vertical size of the window
+			 * Horizontal start position of the window
+			 * Vertical start position of the window
+			 */
+			val = bc->horz.win_count_calc |
+			      ((!!bc->horz.base_win_sel_calc) <<
+				ISIF_HORZ_BC_WIN_SEL_SHIFT) |
+			      ((!!bc->horz.clamp_pix_limit) <<
+				ISIF_HORZ_BC_PIX_LIMIT_SHIFT) |
+			      (bc->horz.win_h_sz_calc <<
+				ISIF_HORZ_BC_WIN_H_SIZE_SHIFT) |
+			      (bc->horz.win_v_sz_calc <<
+				ISIF_HORZ_BC_WIN_V_SIZE_SHIFT);
+			regw(val, CLHWIN0);
+
+			regw(bc->horz.win_start_h_calc, CLHWIN1);
+			regw(bc->horz.win_start_v_calc, CLHWIN2);
+		}
+
+		/* vertical clamp caculation paramaters */
+
+		/* Reset clamp value sel for previous line */
+		val |=
+		(bc->vert.reset_val_sel << ISIF_VERT_BC_RST_VAL_SEL_SHIFT) |
+		(bc->vert.line_ave_coef << ISIF_VERT_BC_LINE_AVE_COEF_SHIFT);
+		regw(val, CLVWIN0);
+
+		/* Optical Black horizontal start position */
+		regw(bc->vert.ob_start_h, CLVWIN1);
+		/* Optical Black vertical start position */
+		regw(bc->vert.ob_start_v, CLVWIN2);
+		/* Optical Black vertical size for calculation */
+		regw(bc->vert.ob_v_sz_calc, CLVWIN3);
+		/* Vertical start position for BC subtraction */
+		regw(bc->vert_start_sub, CLSV);
+	}
+}
+
+static void isif_config_linearization(struct isif_linearize *linearize)
+{
+	u32 val, i;
+
+	if (!linearize->en) {
+		regw(0, LINCFG0);
+		return;
+	}
+
+	/* shift value for correction & enable linearization (set lsb) */
+	val = (linearize->corr_shft << ISIF_LIN_CORRSFT_SHIFT) | 1;
+	regw(val, LINCFG0);
+
+	/* Scale factor */
+	val = ((!!linearize->scale_fact.integer) <<
+	       ISIF_LIN_SCALE_FACT_INTEG_SHIFT) |
+	       linearize->scale_fact.decimal;
+	regw(val, LINCFG1);
+
+	for (i = 0; i < ISIF_LINEAR_TAB_SIZE; i++) {
+		if (i % 2)
+			regw_lin_tbl(linearize->table[i], ((i >> 1) << 2), 1);
+		else
+			regw_lin_tbl(linearize->table[i], ((i >> 1) << 2), 0);
+	}
+}
+
+static int isif_config_dfc(struct isif_dfc *vdfc)
+{
+	/* initialize retries to loop for max ~ 250 usec */
+	u32 val, count, retries = loops_per_jiffy / (4000/HZ);
+	int i;
+
+	if (!vdfc->en)
+		return 0;
+
+	/* Correction mode */
+	val = (vdfc->corr_mode << ISIF_VDFC_CORR_MOD_SHIFT);
+
+	/* Correct whole line or partial */
+	if (vdfc->corr_whole_line)
+		val |= 1 << ISIF_VDFC_CORR_WHOLE_LN_SHIFT;
+
+	/* level shift value */
+	val |= vdfc->def_level_shift << ISIF_VDFC_LEVEL_SHFT_SHIFT;
+
+	regw(val, DFCCTL);
+
+	/* Defect saturation level */
+	regw(vdfc->def_sat_level, VDFSATLV);
+
+	regw(vdfc->table[0].pos_vert, DFCMEM0);
+	regw(vdfc->table[0].pos_horz, DFCMEM1);
+	if (vdfc->corr_mode == ISIF_VDFC_NORMAL ||
+	    vdfc->corr_mode == ISIF_VDFC_HORZ_INTERPOL_IF_SAT) {
+		regw(vdfc->table[0].level_at_pos, DFCMEM2);
+		regw(vdfc->table[0].level_up_pixels, DFCMEM3);
+		regw(vdfc->table[0].level_low_pixels, DFCMEM4);
+	}
+
+	/* set DFCMARST and set DFCMWR */
+	val = regr(DFCMEMCTL) | (1 << ISIF_DFCMEMCTL_DFCMARST_SHIFT) | 1;
+	regw(val, DFCMEMCTL);
+
+	count = retries;
+	while (count && (regr(DFCMEMCTL) & 0x1))
+		count--;
+
+	if (!count) {
+		dev_dbg(isif_cfg.dev, "defect table write timeout !!!\n");
+		return -1;
+	}
+
+	for (i = 1; i < vdfc->num_vdefects; i++) {
+		regw(vdfc->table[i].pos_vert, DFCMEM0);
+		regw(vdfc->table[i].pos_horz, DFCMEM1);
+		if (vdfc->corr_mode == ISIF_VDFC_NORMAL ||
+		    vdfc->corr_mode == ISIF_VDFC_HORZ_INTERPOL_IF_SAT) {
+			regw(vdfc->table[i].level_at_pos, DFCMEM2);
+			regw(vdfc->table[i].level_up_pixels, DFCMEM3);
+			regw(vdfc->table[i].level_low_pixels, DFCMEM4);
+		}
+		val = regr(DFCMEMCTL);
+		/* clear DFCMARST and set DFCMWR */
+		val &= ~BIT(ISIF_DFCMEMCTL_DFCMARST_SHIFT);
+		val |= 1;
+		regw(val, DFCMEMCTL);
+
+		count = retries;
+		while (count && (regr(DFCMEMCTL) & 0x1))
+			count--;
+
+		if (!count) {
+			dev_err(isif_cfg.dev,
+				"defect table write timeout !!!\n");
+			return -1;
+		}
+	}
+	if (vdfc->num_vdefects < ISIF_VDFC_TABLE_SIZE) {
+		/* Extra cycle needed */
+		regw(0, DFCMEM0);
+		regw(0x1FFF, DFCMEM1);
+		regw(1, DFCMEMCTL);
+	}
+
+	/* enable VDFC */
+	reg_modify((1 << ISIF_VDFC_EN_SHIFT), (1 << ISIF_VDFC_EN_SHIFT),
+		   DFCCTL);
+	return 0;
+}
+
+static void isif_config_csc(struct isif_df_csc *df_csc)
+{
+	u32 val1 = 0, val2 = 0, i;
+
+	if (!df_csc->csc.en) {
+		regw(0, CSCCTL);
+		return;
+	}
+	for (i = 0; i < ISIF_CSC_NUM_COEFF; i++) {
+		if ((i % 2) == 0) {
+			/* CSCM - LSB */
+			val1 = (df_csc->csc.coeff[i].integer <<
+				ISIF_CSC_COEF_INTEG_SHIFT) |
+				df_csc->csc.coeff[i].decimal;
+		} else {
+
+			/* CSCM - MSB */
+			val2 = (df_csc->csc.coeff[i].integer <<
+				ISIF_CSC_COEF_INTEG_SHIFT) |
+				df_csc->csc.coeff[i].decimal;
+			val2 <<= ISIF_CSCM_MSB_SHIFT;
+			val2 |= val1;
+			regw(val2, (CSCM0 + ((i - 1) << 1)));
+		}
+	}
+
+	/* program the active area */
+	regw(df_csc->start_pix, FMTSPH);
+	/*
+	 * one extra pixel as required for CSC. Actually number of
+	 * pixel - 1 should be configured in this register. So we
+	 * need to subtract 1 before writing to FMTSPH, but we will
+	 * not do this since csc requires one extra pixel
+	 */
+	regw(df_csc->num_pixels, FMTLNH);
+	regw(df_csc->start_line, FMTSLV);
+	/*
+	 * one extra line as required for CSC. See reason documented for
+	 * num_pixels
+	 */
+	regw(df_csc->num_lines, FMTLNV);
+
+	/* Enable CSC */
+	regw(1, CSCCTL);
+}
+
+static int isif_config_raw(void)
+{
+	struct isif_params_raw *params = &isif_cfg.bayer;
+	struct isif_config_params_raw *module_params =
+		&isif_cfg.bayer.config_params;
+	struct vpss_pg_frame_size frame_size;
+	struct vpss_sync_pol sync;
+	u32 val;
+
+	dev_dbg(isif_cfg.dev, "\nStarting isif_config_raw..\n");
+
+	/*
+	 * Configure CCDCFG register:-
+	 * Set CCD Not to swap input since input is RAW data
+	 * Set FID detection function to Latch at V-Sync
+	 * Set WENLOG - isif valid area
+	 * Set TRGSEL
+	 * Set EXTRG
+	 * Packed to 8 or 16 bits
+	 */
+
+	val = ISIF_YCINSWP_RAW | ISIF_CCDCFG_FIDMD_LATCH_VSYNC |
+		ISIF_CCDCFG_WENLOG_AND | ISIF_CCDCFG_TRGSEL_WEN |
+		ISIF_CCDCFG_EXTRG_DISABLE | isif_cfg.data_pack;
+
+	dev_dbg(isif_cfg.dev, "Writing 0x%x to ...CCDCFG \n", val);
+	regw(val, CCDCFG);
+
+	/*
+	 * Configure the vertical sync polarity(MODESET.VDPOL)
+	 * Configure the horizontal sync polarity (MODESET.HDPOL)
+	 * Configure frame id polarity (MODESET.FLDPOL)
+	 * Configure data polarity
+	 * Configure External WEN Selection
+	 * Configure frame format(progressive or interlace)
+	 * Configure pixel format (Input mode)
+	 * Configure the data shift
+	 */
+
+	val = ISIF_VDHDOUT_INPUT | (params->vd_pol << ISIF_VD_POL_SHIFT) |
+		(params->hd_pol << ISIF_HD_POL_SHIFT) |
+		(params->fid_pol << ISIF_FID_POL_SHIFT) |
+		(ISIF_DATAPOL_NORMAL << ISIF_DATAPOL_SHIFT) |
+		(ISIF_EXWEN_DISABLE << ISIF_EXWEN_SHIFT) |
+		(params->frm_fmt << ISIF_FRM_FMT_SHIFT) |
+		(params->pix_fmt << ISIF_INPUT_SHIFT) |
+		(params->config_params.data_shift << ISIF_DATASFT_SHIFT);
+
+	regw(val, MODESET);
+	dev_dbg(isif_cfg.dev, "Writing 0x%x to MODESET...\n", val);
+
+	/*
+	 * Configure GAMMAWD register
+	 * CFA pattern setting
+	 */
+	val = params->cfa_pat << ISIF_GAMMAWD_CFA_SHIFT;
+
+	/* Gamma msb */
+	if (module_params->compress.alg == ISIF_ALAW)
+		val |= ISIF_ALAW_ENABLE;
+
+	val |= (params->data_msb << ISIF_ALAW_GAMMA_WD_SHIFT);
+	regw(val, CGAMMAWD);
+
+	/* Configure DPCM compression settings */
+	if (module_params->compress.alg == ISIF_DPCM) {
+		val =  BIT(ISIF_DPCM_EN_SHIFT) |
+		       (module_params->compress.pred <<
+		       ISIF_DPCM_PREDICTOR_SHIFT);
+	}
+
+	regw(val, MISC);
+
+	/* Configure Gain & Offset */
+	isif_config_gain_offset();
+
+	/* Configure Color pattern */
+	val = (params->config_params.col_pat_field0.olop) |
+	      (params->config_params.col_pat_field0.olep << 2) |
+	      (params->config_params.col_pat_field0.elop << 4) |
+	      (params->config_params.col_pat_field0.elep << 6) |
+	      (params->config_params.col_pat_field1.olop << 8) |
+	      (params->config_params.col_pat_field1.olep << 10) |
+	      (params->config_params.col_pat_field1.elop << 12) |
+	      (params->config_params.col_pat_field1.elep << 14);
+	regw(val, CCOLP);
+	dev_dbg(isif_cfg.dev, "Writing %x to CCOLP ...\n", val);
+
+	/* Configure HSIZE register  */
+	val = (!!params->horz_flip_en) << ISIF_HSIZE_FLIP_SHIFT;
+
+	/* calculate line offset in 32 bytes based on pack value */
+	if (isif_cfg.data_pack == ISIF_PACK_8BIT)
+		val |= ((params->win.width + 31) >> 5);
+	else if (isif_cfg.data_pack == ISIF_PACK_12BIT)
+		val |= (((params->win.width +
+		       (params->win.width >> 2)) + 31) >> 5);
+	else
+		val |= (((params->win.width * 2) + 31) >> 5);
+	regw(val, HSIZE);
+
+	/* Configure SDOFST register  */
+	if (params->frm_fmt == CCDC_FRMFMT_INTERLACED) {
+		if (params->image_invert_en) {
+			/* For interlace inverse mode */
+			regw(0x4B6D, SDOFST);
+			dev_dbg(isif_cfg.dev, "Writing 0x4B6D to SDOFST...\n");
+		} else {
+			/* For interlace non inverse mode */
+			regw(0x0B6D, SDOFST);
+			dev_dbg(isif_cfg.dev, "Writing 0x0B6D to SDOFST...\n");
+		}
+	} else if (params->frm_fmt == CCDC_FRMFMT_PROGRESSIVE) {
+		if (params->image_invert_en) {
+			/* For progressive inverse mode */
+			regw(0x4000, SDOFST);
+			dev_dbg(isif_cfg.dev, "Writing 0x4000 to SDOFST...\n");
+		} else {
+			/* For progressive non inverse mode */
+			regw(0x0000, SDOFST);
+			dev_dbg(isif_cfg.dev, "Writing 0x0000 to SDOFST...\n");
+		}
+	}
+
+	/* Configure video window */
+	isif_setwin(&params->win, params->frm_fmt, 1);
+
+	/* Configure Black Clamp */
+	isif_config_bclamp(&module_params->bclamp);
+
+	/* Configure Vertical Defection Pixel Correction */
+	if (isif_config_dfc(&module_params->dfc) < 0)
+		return -EFAULT;
+
+	if (!module_params->df_csc.df_or_csc)
+		/* Configure Color Space Conversion */
+		isif_config_csc(&module_params->df_csc);
+
+	isif_config_linearization(&module_params->linearize);
+
+	/* Configure Culling */
+	isif_config_culling(&module_params->culling);
+
+	/* Configure horizontal and vertical offsets(DFC,LSC,Gain) */
+	regw(module_params->horz_offset, DATAHOFST);
+	regw(module_params->vert_offset, DATAVOFST);
+
+	/* Setup test pattern if enabled */
+	if (params->config_params.test_pat_gen) {
+		/* Use the HD/VD pol settings from user */
+		sync.ccdpg_hdpol = params->hd_pol;
+		sync.ccdpg_vdpol = params->vd_pol;
+		dm365_vpss_set_sync_pol(sync);
+		frame_size.hlpfr = isif_cfg.bayer.win.width;
+		frame_size.pplen = isif_cfg.bayer.win.height;
+		dm365_vpss_set_pg_frame_size(frame_size);
+		vpss_select_ccdc_source(VPSS_PGLPBK);
+	}
+
+	dev_dbg(isif_cfg.dev, "\nEnd of isif_config_ycbcr...\n");
+	return 0;
+}
+
+static int isif_set_buftype(enum ccdc_buftype buf_type)
+{
+	if (isif_cfg.if_type == VPFE_RAW_BAYER)
+		isif_cfg.bayer.buf_type = buf_type;
+	else
+		isif_cfg.ycbcr.buf_type = buf_type;
+
+	return 0;
+
+}
+static enum ccdc_buftype isif_get_buftype(void)
+{
+	if (isif_cfg.if_type == VPFE_RAW_BAYER)
+		return isif_cfg.bayer.buf_type;
+
+	return isif_cfg.ycbcr.buf_type;
+}
+
+static int isif_enum_pix(u32 *pix, int i)
+{
+	int ret = -EINVAL;
+
+	if (isif_cfg.if_type == VPFE_RAW_BAYER) {
+		if (i < ARRAY_SIZE(isif_raw_bayer_pix_formats)) {
+			*pix = isif_raw_bayer_pix_formats[i];
+			ret = 0;
+		}
+	} else {
+		if (i < ARRAY_SIZE(isif_raw_yuv_pix_formats)) {
+			*pix = isif_raw_yuv_pix_formats[i];
+			ret = 0;
+		}
+	}
+
+	return ret;
+}
+
+static int isif_set_pixel_format(unsigned int pixfmt)
+{
+	if (isif_cfg.if_type == VPFE_RAW_BAYER) {
+		if (pixfmt == V4L2_PIX_FMT_SBGGR8) {
+			if ((isif_cfg.bayer.config_params.compress.alg !=
+			     ISIF_ALAW) &&
+			    (isif_cfg.bayer.config_params.compress.alg !=
+			     ISIF_DPCM)) {
+				dev_dbg(isif_cfg.dev,
+					"Either configure A-Law or DPCM\n");
+				return -EINVAL;
+			}
+			isif_cfg.data_pack = ISIF_PACK_8BIT;
+		} else if (pixfmt == V4L2_PIX_FMT_SBGGR16) {
+			isif_cfg.bayer.config_params.compress.alg =
+					ISIF_NO_COMPRESSION;
+			isif_cfg.data_pack = ISIF_PACK_16BIT;
+		} else
+			return -EINVAL;
+		isif_cfg.bayer.pix_fmt = CCDC_PIXFMT_RAW;
+	} else {
+		if (pixfmt == V4L2_PIX_FMT_YUYV)
+			isif_cfg.ycbcr.pix_order = CCDC_PIXORDER_YCBYCR;
+		else if (pixfmt == V4L2_PIX_FMT_UYVY)
+			isif_cfg.ycbcr.pix_order = CCDC_PIXORDER_CBYCRY;
+		else
+			return -EINVAL;
+		isif_cfg.data_pack = ISIF_PACK_8BIT;
+	}
+	return 0;
+}
+
+static u32 isif_get_pixel_format(void)
+{
+	u32 pixfmt;
+
+	if (isif_cfg.if_type == VPFE_RAW_BAYER)
+		if (isif_cfg.bayer.config_params.compress.alg == ISIF_ALAW ||
+		    isif_cfg.bayer.config_params.compress.alg == ISIF_DPCM)
+			pixfmt = V4L2_PIX_FMT_SBGGR8;
+		else
+			pixfmt = V4L2_PIX_FMT_SBGGR16;
+	else {
+		if (isif_cfg.ycbcr.pix_order == CCDC_PIXORDER_YCBYCR)
+			pixfmt = V4L2_PIX_FMT_YUYV;
+		else
+			pixfmt = V4L2_PIX_FMT_UYVY;
+	}
+	return pixfmt;
+}
+
+static int isif_set_image_window(struct v4l2_rect *win)
+{
+	if (isif_cfg.if_type == VPFE_RAW_BAYER) {
+		isif_cfg.bayer.win.top = win->top;
+		isif_cfg.bayer.win.left = win->left;
+		isif_cfg.bayer.win.width = win->width;
+		isif_cfg.bayer.win.height = win->height;
+	} else {
+		isif_cfg.ycbcr.win.top = win->top;
+		isif_cfg.ycbcr.win.left = win->left;
+		isif_cfg.ycbcr.win.width = win->width;
+		isif_cfg.ycbcr.win.height = win->height;
+	}
+	return 0;
+}
+
+static void isif_get_image_window(struct v4l2_rect *win)
+{
+	if (isif_cfg.if_type == VPFE_RAW_BAYER)
+		*win = isif_cfg.bayer.win;
+	else
+		*win = isif_cfg.ycbcr.win;
+}
+
+static unsigned int isif_get_line_length(void)
+{
+	unsigned int len;
+
+	if (isif_cfg.if_type == VPFE_RAW_BAYER) {
+		if (isif_cfg.data_pack == ISIF_PACK_8BIT)
+			len = ((isif_cfg.bayer.win.width));
+		else if (isif_cfg.data_pack == ISIF_PACK_12BIT)
+			len = (((isif_cfg.bayer.win.width * 2) +
+				 (isif_cfg.bayer.win.width >> 2)));
+		else
+			len = (((isif_cfg.bayer.win.width * 2)));
+	} else
+		len = (((isif_cfg.ycbcr.win.width * 2)));
+	return ALIGN(len, 32);
+}
+
+static int isif_set_frame_format(enum ccdc_frmfmt frm_fmt)
+{
+	if (isif_cfg.if_type == VPFE_RAW_BAYER)
+		isif_cfg.bayer.frm_fmt = frm_fmt;
+	else
+		isif_cfg.ycbcr.frm_fmt = frm_fmt;
+	return 0;
+}
+static enum ccdc_frmfmt isif_get_frame_format(void)
+{
+	if (isif_cfg.if_type == VPFE_RAW_BAYER)
+		return isif_cfg.bayer.frm_fmt;
+	return isif_cfg.ycbcr.frm_fmt;
+}
+
+static int isif_getfid(void)
+{
+	return (regr(MODESET) >> 15) & 0x1;
+}
+
+/* misc operations */
+static void isif_setfbaddr(unsigned long addr)
+{
+	regw((addr >> 21) & 0x07ff, CADU);
+	regw((addr >> 5) & 0x0ffff, CADL);
+}
+
+static int isif_set_hw_if_params(struct vpfe_hw_if_param *params)
+{
+	isif_cfg.if_type = params->if_type;
+
+	switch (params->if_type) {
+	case VPFE_BT656:
+	case VPFE_BT656_10BIT:
+	case VPFE_YCBCR_SYNC_8:
+		isif_cfg.ycbcr.pix_fmt = CCDC_PIXFMT_YCBCR_8BIT;
+		isif_cfg.ycbcr.pix_order = CCDC_PIXORDER_CBYCRY;
+		break;
+	case VPFE_BT1120:
+	case VPFE_YCBCR_SYNC_16:
+		isif_cfg.ycbcr.pix_fmt = CCDC_PIXFMT_YCBCR_16BIT;
+		isif_cfg.ycbcr.pix_order = CCDC_PIXORDER_CBYCRY;
+		break;
+	case VPFE_RAW_BAYER:
+		isif_cfg.bayer.pix_fmt = CCDC_PIXFMT_RAW;
+		break;
+	default:
+		dev_dbg(isif_cfg.dev, "Invalid interface type\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/* This function will configure ISIF for YCbCr parameters. */
+static int isif_config_ycbcr(void)
+{
+	struct isif_ycbcr_config *params = &isif_cfg.ycbcr;
+	struct vpss_pg_frame_size frame_size;
+	u32 modeset = 0, ccdcfg = 0;
+	struct vpss_sync_pol sync;
+
+	dev_dbg(isif_cfg.dev, "\nStarting isif_config_ycbcr...");
+
+	/* configure pixel format or input mode */
+	modeset = modeset | (params->pix_fmt << ISIF_INPUT_SHIFT) |
+		  (params->frm_fmt << ISIF_FRM_FMT_SHIFT) |
+		  (params->fid_pol << ISIF_FID_POL_SHIFT) |
+		  (params->hd_pol << ISIF_HD_POL_SHIFT) |
+		  (params->vd_pol << ISIF_VD_POL_SHIFT);
+
+	/* pack the data to 8-bit ISIFCFG */
+	switch (isif_cfg.if_type) {
+	case VPFE_BT656:
+		if (params->pix_fmt != CCDC_PIXFMT_YCBCR_8BIT) {
+			dev_dbg(isif_cfg.dev, "Invalid pix_fmt(input mode)\n");
+			return -EINVAL;
+		}
+		modeset |= (VPFE_PINPOL_NEGATIVE << ISIF_VD_POL_SHIFT);
+		regw(3, REC656IF);
+		ccdcfg = ccdcfg | ISIF_DATA_PACK8 | ISIF_YCINSWP_YCBCR;
+		break;
+	case VPFE_BT656_10BIT:
+		if (params->pix_fmt != CCDC_PIXFMT_YCBCR_8BIT) {
+			dev_dbg(isif_cfg.dev, "Invalid pix_fmt(input mode)\n");
+			return -EINVAL;
+		}
+		/* setup BT.656, embedded sync  */
+		regw(3, REC656IF);
+		/* enable 10 bit mode in ccdcfg */
+		ccdcfg = ccdcfg | ISIF_DATA_PACK8 | ISIF_YCINSWP_YCBCR |
+			ISIF_BW656_ENABLE;
+		break;
+	case VPFE_BT1120:
+		if (params->pix_fmt != CCDC_PIXFMT_YCBCR_16BIT) {
+			dev_dbg(isif_cfg.dev, "Invalid pix_fmt(input mode)\n");
+			return -EINVAL;
+		}
+		regw(3, REC656IF);
+		break;
+
+	case VPFE_YCBCR_SYNC_8:
+		ccdcfg |= ISIF_DATA_PACK8;
+		ccdcfg |= ISIF_YCINSWP_YCBCR;
+		if (params->pix_fmt != CCDC_PIXFMT_YCBCR_8BIT) {
+			dev_dbg(isif_cfg.dev, "Invalid pix_fmt(input mode)\n");
+			return -EINVAL;
+		}
+		break;
+	case VPFE_YCBCR_SYNC_16:
+		if (params->pix_fmt != CCDC_PIXFMT_YCBCR_16BIT) {
+			dev_dbg(isif_cfg.dev, "Invalid pix_fmt(input mode)\n");
+			return -EINVAL;
+		}
+		break;
+	default:
+		/* should never come here */
+		dev_dbg(isif_cfg.dev, "Invalid interface type\n");
+		return -EINVAL;
+	}
+
+	regw(modeset, MODESET);
+
+	/* Set up pix order */
+	ccdcfg |= params->pix_order << ISIF_PIX_ORDER_SHIFT;
+
+	regw(ccdcfg, CCDCFG);
+
+	/* configure video window */
+	if ((isif_cfg.if_type == VPFE_BT1120) ||
+	    (isif_cfg.if_type == VPFE_YCBCR_SYNC_16))
+		isif_setwin(&params->win, params->frm_fmt, 1);
+	else
+		isif_setwin(&params->win, params->frm_fmt, 2);
+
+	/*
+	 * configure the horizontal line offset
+	 * this is done by rounding up width to a multiple of 16 pixels
+	 * and multiply by two to account for y:cb:cr 4:2:2 data
+	 */
+	regw(((((params->win.width * 2) + 31) & 0xffffffe0) >> 5), HSIZE);
+
+	/* configure the memory line offset */
+	if ((params->frm_fmt == CCDC_FRMFMT_INTERLACED) &&
+	    (params->buf_type == CCDC_BUFTYPE_FLD_INTERLEAVED))
+		/* two fields are interleaved in memory */
+		regw(0x00000249, SDOFST);
+
+	/* Setup test pattern if enabled */
+	if (isif_cfg.bayer.config_params.test_pat_gen) {
+		sync.ccdpg_hdpol = params->hd_pol;
+		sync.ccdpg_vdpol = params->vd_pol;
+		dm365_vpss_set_sync_pol(sync);
+		dm365_vpss_set_pg_frame_size(frame_size);
+	}
+	return 0;
+}
+
+static int isif_configure(void)
+{
+	if (isif_cfg.if_type == VPFE_RAW_BAYER)
+		return isif_config_raw();
+	return isif_config_ycbcr();
+}
+
+static int isif_close(struct device *device)
+{
+	/* copy defaults to module params */
+	isif_cfg.bayer.config_params = isif_config_defaults;
+	return 0;
+}
+
+static struct ccdc_hw_device isif_hw_dev = {
+	.name = "ISIF",
+	.owner = THIS_MODULE,
+	.hw_ops = {
+		.open = isif_open,
+		.close = isif_close,
+		.enable = isif_enable,
+		.enable_out_to_sdram = isif_enable_output_to_sdram,
+		.set_hw_if_params = isif_set_hw_if_params,
+		.configure = isif_configure,
+		.set_buftype = isif_set_buftype,
+		.get_buftype = isif_get_buftype,
+		.enum_pix = isif_enum_pix,
+		.set_pixel_format = isif_set_pixel_format,
+		.get_pixel_format = isif_get_pixel_format,
+		.set_frame_format = isif_set_frame_format,
+		.get_frame_format = isif_get_frame_format,
+		.set_image_window = isif_set_image_window,
+		.get_image_window = isif_get_image_window,
+		.get_line_length = isif_get_line_length,
+		.setfbaddr = isif_setfbaddr,
+		.getfid = isif_getfid,
+	},
+};
+
+static int isif_probe(struct platform_device *pdev)
+{
+	void (*setup_pinmux)(void);
+	struct resource	*res;
+	void *__iomem addr;
+	int status = 0, i;
+
+	/* Platform data holds setup_pinmux function ptr */
+	if (!pdev->dev.platform_data)
+		return -ENODEV;
+
+	/*
+	 * first try to register with vpfe. If not correct platform, then we
+	 * don't have to iomap
+	 */
+	status = vpfe_register_ccdc_device(&isif_hw_dev);
+	if (status < 0)
+		return status;
+
+	setup_pinmux = pdev->dev.platform_data;
+	/*
+	 * setup Mux configuration for ccdc which may be different for
+	 * different SoCs using this CCDC
+	 */
+	setup_pinmux();
+
+	i = 0;
+	/* Get the ISIF base address, linearization table0 and table1 addr. */
+	while (i < 3) {
+		res = platform_get_resource(pdev, IORESOURCE_MEM, i);
+		if (!res) {
+			status = -ENODEV;
+			goto fail_nobase_res;
+		}
+		res = request_mem_region(res->start, resource_size(res),
+					 res->name);
+		if (!res) {
+			status = -EBUSY;
+			goto fail_nobase_res;
+		}
+		addr = ioremap_nocache(res->start, resource_size(res));
+		if (!addr) {
+			status = -ENOMEM;
+			goto fail_base_iomap;
+		}
+		switch (i) {
+		case 0:
+			/* ISIF base address */
+			isif_cfg.base_addr = addr;
+			break;
+		case 1:
+			/* ISIF linear tbl0 address */
+			isif_cfg.linear_tbl0_addr = addr;
+			break;
+		default:
+			/* ISIF linear tbl0 address */
+			isif_cfg.linear_tbl1_addr = addr;
+			break;
+		}
+		i++;
+	}
+	isif_cfg.dev = &pdev->dev;
+
+	printk(KERN_NOTICE "%s is registered with vpfe.\n",
+		isif_hw_dev.name);
+	return 0;
+fail_base_iomap:
+	release_mem_region(res->start, resource_size(res));
+	i--;
+fail_nobase_res:
+	if (isif_cfg.base_addr)
+		iounmap(isif_cfg.base_addr);
+	if (isif_cfg.linear_tbl0_addr)
+		iounmap(isif_cfg.linear_tbl0_addr);
+
+	while (i >= 0) {
+		res = platform_get_resource(pdev, IORESOURCE_MEM, i);
+		release_mem_region(res->start, resource_size(res));
+		i--;
+	}
+	vpfe_unregister_ccdc_device(&isif_hw_dev);
+	return status;
+}
+
+static int isif_remove(struct platform_device *pdev)
+{
+	struct resource	*res;
+	int i = 0;
+
+	iounmap(isif_cfg.base_addr);
+	iounmap(isif_cfg.linear_tbl0_addr);
+	iounmap(isif_cfg.linear_tbl1_addr);
+	while (i < 3) {
+		res = platform_get_resource(pdev, IORESOURCE_MEM, i);
+		if (res)
+			release_mem_region(res->start, resource_size(res));
+		i++;
+	}
+	vpfe_unregister_ccdc_device(&isif_hw_dev);
+	return 0;
+}
+
+static struct platform_driver isif_driver = {
+	.driver = {
+		.name	= "isif",
+	},
+	.remove = isif_remove,
+	.probe = isif_probe,
+};
+
+module_platform_driver(isif_driver);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/platform/davinci/isif_regs.h b/drivers/media/platform/davinci/isif_regs.h
new file mode 100644
index 000000000..3993aece8
--- /dev/null
+++ b/drivers/media/platform/davinci/isif_regs.h
@@ -0,0 +1,269 @@
+/*
+ * Copyright (C) 2008-2009 Texas Instruments Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef _ISIF_REGS_H
+#define _ISIF_REGS_H
+
+/* ISIF registers relative offsets */
+#define SYNCEN					0x00
+#define MODESET					0x04
+#define HDW					0x08
+#define VDW					0x0c
+#define PPLN					0x10
+#define LPFR					0x14
+#define SPH					0x18
+#define LNH					0x1c
+#define SLV0					0x20
+#define SLV1					0x24
+#define LNV					0x28
+#define CULH					0x2c
+#define CULV					0x30
+#define HSIZE					0x34
+#define SDOFST					0x38
+#define CADU					0x3c
+#define CADL					0x40
+#define LINCFG0					0x44
+#define LINCFG1					0x48
+#define CCOLP					0x4c
+#define CRGAIN 					0x50
+#define CGRGAIN					0x54
+#define CGBGAIN					0x58
+#define CBGAIN					0x5c
+#define COFSTA					0x60
+#define FLSHCFG0				0x64
+#define FLSHCFG1				0x68
+#define FLSHCFG2				0x6c
+#define VDINT0					0x70
+#define VDINT1					0x74
+#define VDINT2					0x78
+#define MISC 					0x7c
+#define CGAMMAWD				0x80
+#define REC656IF				0x84
+#define CCDCFG					0x88
+/*****************************************************
+* Defect Correction registers
+*****************************************************/
+#define DFCCTL					0x8c
+#define VDFSATLV				0x90
+#define DFCMEMCTL				0x94
+#define DFCMEM0					0x98
+#define DFCMEM1					0x9c
+#define DFCMEM2					0xa0
+#define DFCMEM3					0xa4
+#define DFCMEM4					0xa8
+/****************************************************
+* Black Clamp registers
+****************************************************/
+#define CLAMPCFG				0xac
+#define CLDCOFST				0xb0
+#define CLSV					0xb4
+#define CLHWIN0					0xb8
+#define CLHWIN1					0xbc
+#define CLHWIN2					0xc0
+#define CLVRV					0xc4
+#define CLVWIN0					0xc8
+#define CLVWIN1					0xcc
+#define CLVWIN2					0xd0
+#define CLVWIN3					0xd4
+/****************************************************
+* Lense Shading Correction
+****************************************************/
+#define DATAHOFST				0xd8
+#define DATAVOFST				0xdc
+#define LSCHVAL					0xe0
+#define LSCVVAL					0xe4
+#define TWODLSCCFG				0xe8
+#define TWODLSCOFST				0xec
+#define TWODLSCINI				0xf0
+#define TWODLSCGRBU				0xf4
+#define TWODLSCGRBL				0xf8
+#define TWODLSCGROF				0xfc
+#define TWODLSCORBU				0x100
+#define TWODLSCORBL				0x104
+#define TWODLSCOROF				0x108
+#define TWODLSCIRQEN				0x10c
+#define TWODLSCIRQST				0x110
+/****************************************************
+* Data formatter
+****************************************************/
+#define FMTCFG					0x114
+#define FMTPLEN					0x118
+#define FMTSPH					0x11c
+#define FMTLNH					0x120
+#define FMTSLV					0x124
+#define FMTLNV					0x128
+#define FMTRLEN					0x12c
+#define FMTHCNT					0x130
+#define FMTAPTR_BASE				0x134
+/* Below macro for addresses FMTAPTR0 - FMTAPTR15 */
+#define FMTAPTR(i)			(FMTAPTR_BASE + (i * 4))
+#define FMTPGMVF0				0x174
+#define FMTPGMVF1				0x178
+#define FMTPGMAPU0				0x17c
+#define FMTPGMAPU1				0x180
+#define FMTPGMAPS0				0x184
+#define FMTPGMAPS1				0x188
+#define FMTPGMAPS2				0x18c
+#define FMTPGMAPS3				0x190
+#define FMTPGMAPS4				0x194
+#define FMTPGMAPS5				0x198
+#define FMTPGMAPS6				0x19c
+#define FMTPGMAPS7				0x1a0
+/************************************************
+* Color Space Converter
+************************************************/
+#define CSCCTL					0x1a4
+#define CSCM0					0x1a8
+#define CSCM1					0x1ac
+#define CSCM2					0x1b0
+#define CSCM3					0x1b4
+#define CSCM4					0x1b8
+#define CSCM5					0x1bc
+#define CSCM6					0x1c0
+#define CSCM7					0x1c4
+#define OBWIN0					0x1c8
+#define OBWIN1					0x1cc
+#define OBWIN2					0x1d0
+#define OBWIN3					0x1d4
+#define OBVAL0					0x1d8
+#define OBVAL1					0x1dc
+#define OBVAL2					0x1e0
+#define OBVAL3					0x1e4
+#define OBVAL4					0x1e8
+#define OBVAL5					0x1ec
+#define OBVAL6					0x1f0
+#define OBVAL7					0x1f4
+#define CLKCTL					0x1f8
+
+/* Masks & Shifts below */
+#define START_PX_HOR_MASK			0x7FFF
+#define NUM_PX_HOR_MASK				0x7FFF
+#define START_VER_ONE_MASK			0x7FFF
+#define START_VER_TWO_MASK			0x7FFF
+#define NUM_LINES_VER				0x7FFF
+
+/* gain - offset masks */
+#define GAIN_INTEGER_SHIFT			9
+#define OFFSET_MASK				0xFFF
+#define GAIN_SDRAM_EN_SHIFT			12
+#define GAIN_IPIPE_EN_SHIFT			13
+#define GAIN_H3A_EN_SHIFT			14
+#define OFST_SDRAM_EN_SHIFT			8
+#define OFST_IPIPE_EN_SHIFT			9
+#define OFST_H3A_EN_SHIFT			10
+#define GAIN_OFFSET_EN_MASK			0x7700
+
+/* Culling */
+#define CULL_PAT_EVEN_LINE_SHIFT		8
+
+/* CCDCFG register */
+#define ISIF_YCINSWP_RAW			(0x00 << 4)
+#define ISIF_YCINSWP_YCBCR			(0x01 << 4)
+#define ISIF_CCDCFG_FIDMD_LATCH_VSYNC		(0x00 << 6)
+#define ISIF_CCDCFG_WENLOG_AND			(0x00 << 8)
+#define ISIF_CCDCFG_TRGSEL_WEN			(0x00 << 9)
+#define ISIF_CCDCFG_EXTRG_DISABLE		(0x00 << 10)
+#define ISIF_LATCH_ON_VSYNC_DISABLE		(0x01 << 15)
+#define ISIF_LATCH_ON_VSYNC_ENABLE		(0x00 << 15)
+#define ISIF_DATA_PACK_MASK			3
+#define ISIF_DATA_PACK16			0
+#define ISIF_DATA_PACK12			1
+#define ISIF_DATA_PACK8				2
+#define ISIF_PIX_ORDER_SHIFT			11
+#define ISIF_BW656_ENABLE			(0x01 << 5)
+
+/* MODESET registers */
+#define ISIF_VDHDOUT_INPUT			(0x00 << 0)
+#define ISIF_INPUT_SHIFT			12
+#define ISIF_RAW_INPUT_MODE			0
+#define ISIF_FID_POL_SHIFT			4
+#define ISIF_HD_POL_SHIFT			3
+#define ISIF_VD_POL_SHIFT			2
+#define ISIF_DATAPOL_NORMAL			0
+#define ISIF_DATAPOL_SHIFT			6
+#define ISIF_EXWEN_DISABLE 			0
+#define ISIF_EXWEN_SHIFT			5
+#define ISIF_FRM_FMT_SHIFT			7
+#define ISIF_DATASFT_SHIFT			8
+#define ISIF_LPF_SHIFT				14
+#define ISIF_LPF_MASK				1
+
+/* GAMMAWD registers */
+#define ISIF_ALAW_GAMMA_WD_MASK			0xF
+#define ISIF_ALAW_GAMMA_WD_SHIFT		1
+#define ISIF_ALAW_ENABLE			1
+#define ISIF_GAMMAWD_CFA_SHIFT			5
+
+/* HSIZE registers */
+#define ISIF_HSIZE_FLIP_MASK			1
+#define ISIF_HSIZE_FLIP_SHIFT			12
+
+/* MISC registers */
+#define ISIF_DPCM_EN_SHIFT			12
+#define ISIF_DPCM_PREDICTOR_SHIFT		13
+
+/* Black clamp related */
+#define ISIF_BC_MODE_COLOR_SHIFT		4
+#define ISIF_HORZ_BC_MODE_SHIFT			1
+#define ISIF_HORZ_BC_WIN_SEL_SHIFT		5
+#define ISIF_HORZ_BC_PIX_LIMIT_SHIFT		6
+#define ISIF_HORZ_BC_WIN_H_SIZE_SHIFT		8
+#define ISIF_HORZ_BC_WIN_V_SIZE_SHIFT		12
+#define	ISIF_VERT_BC_RST_VAL_SEL_SHIFT		4
+#define ISIF_VERT_BC_LINE_AVE_COEF_SHIFT	8
+
+/* VDFC registers */
+#define ISIF_VDFC_EN_SHIFT			4
+#define ISIF_VDFC_CORR_MOD_SHIFT		5
+#define ISIF_VDFC_CORR_WHOLE_LN_SHIFT		7
+#define ISIF_VDFC_LEVEL_SHFT_SHIFT		8
+#define ISIF_VDFC_POS_MASK			0x1FFF
+#define ISIF_DFCMEMCTL_DFCMARST_SHIFT		2
+
+/* CSC registers */
+#define ISIF_CSC_COEF_INTEG_MASK		7
+#define ISIF_CSC_COEF_DECIMAL_MASK		0x1f
+#define ISIF_CSC_COEF_INTEG_SHIFT		5
+#define ISIF_CSCM_MSB_SHIFT			8
+#define ISIF_DF_CSC_SPH_MASK			0x1FFF
+#define ISIF_DF_CSC_LNH_MASK			0x1FFF
+#define ISIF_DF_CSC_SLV_MASK			0x1FFF
+#define ISIF_DF_CSC_LNV_MASK			0x1FFF
+#define ISIF_DF_NUMLINES			0x7FFF
+#define ISIF_DF_NUMPIX				0x1FFF
+
+/* Offsets for LSC/DFC/Gain */
+#define ISIF_DATA_H_OFFSET_MASK			0x1FFF
+#define ISIF_DATA_V_OFFSET_MASK			0x1FFF
+
+/* Linearization */
+#define ISIF_LIN_CORRSFT_SHIFT			4
+#define ISIF_LIN_SCALE_FACT_INTEG_SHIFT		10
+
+
+/* Pattern registers */
+#define ISIF_PG_EN				(1 << 3)
+#define ISIF_SEL_PG_SRC				(3 << 4)
+#define ISIF_PG_VD_POL_SHIFT			0
+#define ISIF_PG_HD_POL_SHIFT			1
+
+/*random other junk*/
+#define ISIF_SYNCEN_VDHDEN_MASK			(1 << 0)
+#define ISIF_SYNCEN_WEN_MASK			(1 << 1)
+#define ISIF_SYNCEN_WEN_SHIFT			1
+
+#endif
diff --git a/drivers/media/platform/davinci/vpbe.c b/drivers/media/platform/davinci/vpbe.c
new file mode 100644
index 000000000..9a6c2cc38
--- /dev/null
+++ b/drivers/media/platform/davinci/vpbe.c
@@ -0,0 +1,884 @@
+/*
+ * Copyright (C) 2010 Texas Instruments Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/fs.h>
+#include <linux/string.h>
+#include <linux/wait.h>
+#include <linux/time.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <media/v4l2-device.h>
+#include <media/davinci/vpbe_types.h>
+#include <media/davinci/vpbe.h>
+#include <media/davinci/vpss.h>
+#include <media/davinci/vpbe_venc.h>
+
+#define VPBE_DEFAULT_OUTPUT	"Composite"
+#define VPBE_DEFAULT_MODE	"ntsc"
+
+static char *def_output = VPBE_DEFAULT_OUTPUT;
+static char *def_mode = VPBE_DEFAULT_MODE;
+static int debug;
+
+module_param(def_output, charp, S_IRUGO);
+module_param(def_mode, charp, S_IRUGO);
+module_param(debug, int, 0644);
+
+MODULE_PARM_DESC(def_output, "vpbe output name (default:Composite)");
+MODULE_PARM_DESC(def_mode, "vpbe output mode name (default:ntsc");
+MODULE_PARM_DESC(debug, "Debug level 0-1");
+
+MODULE_DESCRIPTION("TI DMXXX VPBE Display controller");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Texas Instruments");
+
+/**
+ * vpbe_current_encoder_info - Get config info for current encoder
+ * @vpbe_dev - vpbe device ptr
+ *
+ * Return ptr to current encoder config info
+ */
+static struct encoder_config_info*
+vpbe_current_encoder_info(struct vpbe_device *vpbe_dev)
+{
+	struct vpbe_config *cfg = vpbe_dev->cfg;
+	int index = vpbe_dev->current_sd_index;
+
+	return ((index == 0) ? &cfg->venc :
+				&cfg->ext_encoders[index-1]);
+}
+
+/**
+ * vpbe_find_encoder_sd_index - Given a name find encoder sd index
+ *
+ * @vpbe_config - ptr to vpbe cfg
+ * @output_index - index used by application
+ *
+ * Return sd index of the encoder
+ */
+static int vpbe_find_encoder_sd_index(struct vpbe_config *cfg,
+			     int index)
+{
+	char *encoder_name = cfg->outputs[index].subdev_name;
+	int i;
+
+	/* Venc is always first	*/
+	if (!strcmp(encoder_name, cfg->venc.module_name))
+		return 0;
+
+	for (i = 0; i < cfg->num_ext_encoders; i++) {
+		if (!strcmp(encoder_name,
+		     cfg->ext_encoders[i].module_name))
+			return i+1;
+	}
+
+	return -EINVAL;
+}
+
+/**
+ * vpbe_g_cropcap - Get crop capabilities of the display
+ * @vpbe_dev - vpbe device ptr
+ * @cropcap - cropcap is a ptr to struct v4l2_cropcap
+ *
+ * Update the crop capabilities in crop cap for current
+ * mode
+ */
+static int vpbe_g_cropcap(struct vpbe_device *vpbe_dev,
+			  struct v4l2_cropcap *cropcap)
+{
+	if (NULL == cropcap)
+		return -EINVAL;
+	cropcap->bounds.left = 0;
+	cropcap->bounds.top = 0;
+	cropcap->bounds.width = vpbe_dev->current_timings.xres;
+	cropcap->bounds.height = vpbe_dev->current_timings.yres;
+	cropcap->defrect = cropcap->bounds;
+
+	return 0;
+}
+
+/**
+ * vpbe_enum_outputs - enumerate outputs
+ * @vpbe_dev - vpbe device ptr
+ * @output - ptr to v4l2_output structure
+ *
+ * Enumerates the outputs available at the vpbe display
+ * returns the status, -EINVAL if end of output list
+ */
+static int vpbe_enum_outputs(struct vpbe_device *vpbe_dev,
+			     struct v4l2_output *output)
+{
+	struct vpbe_config *cfg = vpbe_dev->cfg;
+	int temp_index = output->index;
+
+	if (temp_index >= cfg->num_outputs)
+		return -EINVAL;
+
+	*output = cfg->outputs[temp_index].output;
+	output->index = temp_index;
+
+	return 0;
+}
+
+static int vpbe_get_mode_info(struct vpbe_device *vpbe_dev, char *mode,
+			      int output_index)
+{
+	struct vpbe_config *cfg = vpbe_dev->cfg;
+	struct vpbe_enc_mode_info var;
+	int curr_output = output_index;
+	int i;
+
+	if (NULL == mode)
+		return -EINVAL;
+
+	for (i = 0; i < cfg->outputs[curr_output].num_modes; i++) {
+		var = cfg->outputs[curr_output].modes[i];
+		if (!strcmp(mode, var.name)) {
+			vpbe_dev->current_timings = var;
+			return 0;
+		}
+	}
+
+	return -EINVAL;
+}
+
+static int vpbe_get_current_mode_info(struct vpbe_device *vpbe_dev,
+				      struct vpbe_enc_mode_info *mode_info)
+{
+	if (NULL == mode_info)
+		return -EINVAL;
+
+	*mode_info = vpbe_dev->current_timings;
+
+	return 0;
+}
+
+/* Get std by std id */
+static int vpbe_get_std_info(struct vpbe_device *vpbe_dev,
+			     v4l2_std_id std_id)
+{
+	struct vpbe_config *cfg = vpbe_dev->cfg;
+	struct vpbe_enc_mode_info var;
+	int curr_output = vpbe_dev->current_out_index;
+	int i;
+
+	for (i = 0; i < vpbe_dev->cfg->outputs[curr_output].num_modes; i++) {
+		var = cfg->outputs[curr_output].modes[i];
+		if ((var.timings_type & VPBE_ENC_STD) &&
+		  (var.std_id & std_id)) {
+			vpbe_dev->current_timings = var;
+			return 0;
+		}
+	}
+
+	return -EINVAL;
+}
+
+static int vpbe_get_std_info_by_name(struct vpbe_device *vpbe_dev,
+				char *std_name)
+{
+	struct vpbe_config *cfg = vpbe_dev->cfg;
+	struct vpbe_enc_mode_info var;
+	int curr_output = vpbe_dev->current_out_index;
+	int i;
+
+	for (i = 0; i < vpbe_dev->cfg->outputs[curr_output].num_modes; i++) {
+		var = cfg->outputs[curr_output].modes[i];
+		if (!strcmp(var.name, std_name)) {
+			vpbe_dev->current_timings = var;
+			return 0;
+		}
+	}
+
+	return -EINVAL;
+}
+
+/**
+ * vpbe_set_output - Set output
+ * @vpbe_dev - vpbe device ptr
+ * @index - index of output
+ *
+ * Set vpbe output to the output specified by the index
+ */
+static int vpbe_set_output(struct vpbe_device *vpbe_dev, int index)
+{
+	struct encoder_config_info *curr_enc_info =
+			vpbe_current_encoder_info(vpbe_dev);
+	struct vpbe_config *cfg = vpbe_dev->cfg;
+	struct venc_platform_data *venc_device = vpbe_dev->venc_device;
+	u32 if_params;
+	int enc_out_index;
+	int sd_index;
+	int ret = 0;
+
+	if (index >= cfg->num_outputs)
+		return -EINVAL;
+
+	mutex_lock(&vpbe_dev->lock);
+
+	sd_index = vpbe_dev->current_sd_index;
+	enc_out_index = cfg->outputs[index].output.index;
+	/*
+	 * Currently we switch the encoder based on output selected
+	 * by the application. If media controller is implemented later
+	 * there is will be an API added to setup_link between venc
+	 * and external encoder. So in that case below comparison always
+	 * match and encoder will not be switched. But if application
+	 * chose not to use media controller, then this provides current
+	 * way of switching encoder at the venc output.
+	 */
+	if (strcmp(curr_enc_info->module_name,
+		   cfg->outputs[index].subdev_name)) {
+		/* Need to switch the encoder at the output */
+		sd_index = vpbe_find_encoder_sd_index(cfg, index);
+		if (sd_index < 0) {
+			ret = -EINVAL;
+			goto out;
+		}
+
+		if_params = cfg->outputs[index].if_params;
+		venc_device->setup_if_config(if_params);
+		if (ret)
+			goto out;
+	}
+
+	/* Set output at the encoder */
+	ret = v4l2_subdev_call(vpbe_dev->encoders[sd_index], video,
+				       s_routing, 0, enc_out_index, 0);
+	if (ret)
+		goto out;
+
+	/*
+	 * It is assumed that venc or extenal encoder will set a default
+	 * mode in the sub device. For external encoder or LCD pannel output,
+	 * we also need to set up the lcd port for the required mode. So setup
+	 * the lcd port for the default mode that is configured in the board
+	 * arch/arm/mach-davinci/board-dm355-evm.setup file for the external
+	 * encoder.
+	 */
+	ret = vpbe_get_mode_info(vpbe_dev,
+				 cfg->outputs[index].default_mode, index);
+	if (!ret) {
+		struct osd_state *osd_device = vpbe_dev->osd_device;
+
+		osd_device->ops.set_left_margin(osd_device,
+			vpbe_dev->current_timings.left_margin);
+		osd_device->ops.set_top_margin(osd_device,
+		vpbe_dev->current_timings.upper_margin);
+		vpbe_dev->current_sd_index = sd_index;
+		vpbe_dev->current_out_index = index;
+	}
+out:
+	mutex_unlock(&vpbe_dev->lock);
+	return ret;
+}
+
+static int vpbe_set_default_output(struct vpbe_device *vpbe_dev)
+{
+	struct vpbe_config *cfg = vpbe_dev->cfg;
+	int ret = 0;
+	int i;
+
+	for (i = 0; i < cfg->num_outputs; i++) {
+		if (!strcmp(def_output,
+			    cfg->outputs[i].output.name)) {
+			ret = vpbe_set_output(vpbe_dev, i);
+			if (!ret)
+				vpbe_dev->current_out_index = i;
+			return ret;
+		}
+	}
+	return ret;
+}
+
+/**
+ * vpbe_get_output - Get output
+ * @vpbe_dev - vpbe device ptr
+ *
+ * return current vpbe output to the the index
+ */
+static unsigned int vpbe_get_output(struct vpbe_device *vpbe_dev)
+{
+	return vpbe_dev->current_out_index;
+}
+
+/**
+ * vpbe_s_dv_timings - Set the given preset timings in the encoder
+ *
+ * Sets the timings if supported by the current encoder. Return the status.
+ * 0 - success & -EINVAL on error
+ */
+static int vpbe_s_dv_timings(struct vpbe_device *vpbe_dev,
+		    struct v4l2_dv_timings *dv_timings)
+{
+	struct vpbe_config *cfg = vpbe_dev->cfg;
+	int out_index = vpbe_dev->current_out_index;
+	struct vpbe_output *output = &cfg->outputs[out_index];
+	int sd_index = vpbe_dev->current_sd_index;
+	int ret, i;
+
+
+	if (!(cfg->outputs[out_index].output.capabilities &
+	    V4L2_OUT_CAP_DV_TIMINGS))
+		return -ENODATA;
+
+	for (i = 0; i < output->num_modes; i++) {
+		if (output->modes[i].timings_type == VPBE_ENC_DV_TIMINGS &&
+		    !memcmp(&output->modes[i].dv_timings,
+				dv_timings, sizeof(*dv_timings)))
+			break;
+	}
+	if (i >= output->num_modes)
+		return -EINVAL;
+	vpbe_dev->current_timings = output->modes[i];
+	mutex_lock(&vpbe_dev->lock);
+
+	ret = v4l2_subdev_call(vpbe_dev->encoders[sd_index], video,
+					s_dv_timings, dv_timings);
+	if (!ret && (vpbe_dev->amp != NULL)) {
+		/* Call amplifier subdevice */
+		ret = v4l2_subdev_call(vpbe_dev->amp, video,
+				s_dv_timings, dv_timings);
+	}
+	/* set the lcd controller output for the given mode */
+	if (!ret) {
+		struct osd_state *osd_device = vpbe_dev->osd_device;
+
+		osd_device->ops.set_left_margin(osd_device,
+		vpbe_dev->current_timings.left_margin);
+		osd_device->ops.set_top_margin(osd_device,
+		vpbe_dev->current_timings.upper_margin);
+	}
+	mutex_unlock(&vpbe_dev->lock);
+
+	return ret;
+}
+
+/**
+ * vpbe_g_dv_timings - Get the timings in the current encoder
+ *
+ * Get the timings in the current encoder. Return the status. 0 - success
+ * -EINVAL on error
+ */
+static int vpbe_g_dv_timings(struct vpbe_device *vpbe_dev,
+		     struct v4l2_dv_timings *dv_timings)
+{
+	struct vpbe_config *cfg = vpbe_dev->cfg;
+	int out_index = vpbe_dev->current_out_index;
+
+	if (!(cfg->outputs[out_index].output.capabilities &
+		V4L2_OUT_CAP_DV_TIMINGS))
+		return -ENODATA;
+
+	if (vpbe_dev->current_timings.timings_type &
+	  VPBE_ENC_DV_TIMINGS) {
+		*dv_timings = vpbe_dev->current_timings.dv_timings;
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+/**
+ * vpbe_enum_dv_timings - Enumerate the dv timings in the current encoder
+ *
+ * Get the timings in the current encoder. Return the status. 0 - success
+ * -EINVAL on error
+ */
+static int vpbe_enum_dv_timings(struct vpbe_device *vpbe_dev,
+			 struct v4l2_enum_dv_timings *timings)
+{
+	struct vpbe_config *cfg = vpbe_dev->cfg;
+	int out_index = vpbe_dev->current_out_index;
+	struct vpbe_output *output = &cfg->outputs[out_index];
+	int j = 0;
+	int i;
+
+	if (!(output->output.capabilities & V4L2_OUT_CAP_DV_TIMINGS))
+		return -ENODATA;
+
+	for (i = 0; i < output->num_modes; i++) {
+		if (output->modes[i].timings_type == VPBE_ENC_DV_TIMINGS) {
+			if (j == timings->index)
+				break;
+			j++;
+		}
+	}
+
+	if (i == output->num_modes)
+		return -EINVAL;
+	timings->timings = output->modes[i].dv_timings;
+	return 0;
+}
+
+/**
+ * vpbe_s_std - Set the given standard in the encoder
+ *
+ * Sets the standard if supported by the current encoder. Return the status.
+ * 0 - success & -EINVAL on error
+ */
+static int vpbe_s_std(struct vpbe_device *vpbe_dev, v4l2_std_id std_id)
+{
+	struct vpbe_config *cfg = vpbe_dev->cfg;
+	int out_index = vpbe_dev->current_out_index;
+	int sd_index = vpbe_dev->current_sd_index;
+	int ret;
+
+	if (!(cfg->outputs[out_index].output.capabilities &
+		V4L2_OUT_CAP_STD))
+		return -ENODATA;
+
+	ret = vpbe_get_std_info(vpbe_dev, std_id);
+	if (ret)
+		return ret;
+
+	mutex_lock(&vpbe_dev->lock);
+
+	ret = v4l2_subdev_call(vpbe_dev->encoders[sd_index], video,
+			       s_std_output, std_id);
+	/* set the lcd controller output for the given mode */
+	if (!ret) {
+		struct osd_state *osd_device = vpbe_dev->osd_device;
+
+		osd_device->ops.set_left_margin(osd_device,
+		vpbe_dev->current_timings.left_margin);
+		osd_device->ops.set_top_margin(osd_device,
+		vpbe_dev->current_timings.upper_margin);
+	}
+	mutex_unlock(&vpbe_dev->lock);
+
+	return ret;
+}
+
+/**
+ * vpbe_g_std - Get the standard in the current encoder
+ *
+ * Get the standard in the current encoder. Return the status. 0 - success
+ * -EINVAL on error
+ */
+static int vpbe_g_std(struct vpbe_device *vpbe_dev, v4l2_std_id *std_id)
+{
+	struct vpbe_enc_mode_info *cur_timings = &vpbe_dev->current_timings;
+	struct vpbe_config *cfg = vpbe_dev->cfg;
+	int out_index = vpbe_dev->current_out_index;
+
+	if (!(cfg->outputs[out_index].output.capabilities & V4L2_OUT_CAP_STD))
+		return -ENODATA;
+
+	if (cur_timings->timings_type & VPBE_ENC_STD) {
+		*std_id = cur_timings->std_id;
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+/**
+ * vpbe_set_mode - Set mode in the current encoder using mode info
+ *
+ * Use the mode string to decide what timings to set in the encoder
+ * This is typically useful when fbset command is used to change the current
+ * timings by specifying a string to indicate the timings.
+ */
+static int vpbe_set_mode(struct vpbe_device *vpbe_dev,
+			 struct vpbe_enc_mode_info *mode_info)
+{
+	struct vpbe_enc_mode_info *preset_mode = NULL;
+	struct vpbe_config *cfg = vpbe_dev->cfg;
+	struct v4l2_dv_timings dv_timings;
+	struct osd_state *osd_device;
+	int out_index = vpbe_dev->current_out_index;
+	int ret = 0;
+	int i;
+
+	if ((NULL == mode_info) || (NULL == mode_info->name))
+		return -EINVAL;
+
+	for (i = 0; i < cfg->outputs[out_index].num_modes; i++) {
+		if (!strcmp(mode_info->name,
+		     cfg->outputs[out_index].modes[i].name)) {
+			preset_mode = &cfg->outputs[out_index].modes[i];
+			/*
+			 * it may be one of the 3 timings type. Check and
+			 * invoke right API
+			 */
+			if (preset_mode->timings_type & VPBE_ENC_STD)
+				return vpbe_s_std(vpbe_dev,
+						 preset_mode->std_id);
+			if (preset_mode->timings_type &
+						VPBE_ENC_DV_TIMINGS) {
+				dv_timings =
+					preset_mode->dv_timings;
+				return vpbe_s_dv_timings(vpbe_dev, &dv_timings);
+			}
+		}
+	}
+
+	/* Only custom timing should reach here */
+	if (preset_mode == NULL)
+		return -EINVAL;
+
+	mutex_lock(&vpbe_dev->lock);
+
+	osd_device = vpbe_dev->osd_device;
+	vpbe_dev->current_timings = *preset_mode;
+	osd_device->ops.set_left_margin(osd_device,
+		vpbe_dev->current_timings.left_margin);
+	osd_device->ops.set_top_margin(osd_device,
+		vpbe_dev->current_timings.upper_margin);
+
+	mutex_unlock(&vpbe_dev->lock);
+
+	return ret;
+}
+
+static int vpbe_set_default_mode(struct vpbe_device *vpbe_dev)
+{
+	int ret;
+
+	ret = vpbe_get_std_info_by_name(vpbe_dev, def_mode);
+	if (ret)
+		return ret;
+
+	/* set the default mode in the encoder */
+	return vpbe_set_mode(vpbe_dev, &vpbe_dev->current_timings);
+}
+
+static int platform_device_get(struct device *dev, void *data)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct vpbe_device *vpbe_dev = data;
+
+	if (strstr(pdev->name, "vpbe-osd") != NULL)
+		vpbe_dev->osd_device = platform_get_drvdata(pdev);
+	if (strstr(pdev->name, "vpbe-venc") != NULL)
+		vpbe_dev->venc_device = dev_get_platdata(&pdev->dev);
+
+	return 0;
+}
+
+/**
+ * vpbe_initialize() - Initialize the vpbe display controller
+ * @vpbe_dev - vpbe device ptr
+ *
+ * Master frame buffer device drivers calls this to initialize vpbe
+ * display controller. This will then registers v4l2 device and the sub
+ * devices and sets a current encoder sub device for display. v4l2 display
+ * device driver is the master and frame buffer display device driver is
+ * the slave. Frame buffer display driver checks the initialized during
+ * probe and exit if not initialized. Returns status.
+ */
+static int vpbe_initialize(struct device *dev, struct vpbe_device *vpbe_dev)
+{
+	struct encoder_config_info *enc_info;
+	struct amp_config_info *amp_info;
+	struct v4l2_subdev **enc_subdev;
+	struct osd_state *osd_device;
+	struct i2c_adapter *i2c_adap;
+	int num_encoders;
+	int ret = 0;
+	int err;
+	int i;
+
+	/*
+	 * v4l2 abd FBDev frame buffer devices will get the vpbe_dev pointer
+	 * from the platform device by iteration of platform drivers and
+	 * matching with device name
+	 */
+	if (NULL == vpbe_dev || NULL == dev) {
+		printk(KERN_ERR "Null device pointers.\n");
+		return -ENODEV;
+	}
+
+	if (vpbe_dev->initialized)
+		return 0;
+
+	mutex_lock(&vpbe_dev->lock);
+
+	if (strcmp(vpbe_dev->cfg->module_name, "dm644x-vpbe-display") != 0) {
+		/* We have dac clock available for platform */
+		vpbe_dev->dac_clk = clk_get(vpbe_dev->pdev, "vpss_dac");
+		if (IS_ERR(vpbe_dev->dac_clk)) {
+			ret =  PTR_ERR(vpbe_dev->dac_clk);
+			goto fail_mutex_unlock;
+		}
+		if (clk_prepare_enable(vpbe_dev->dac_clk)) {
+			ret =  -ENODEV;
+			clk_put(vpbe_dev->dac_clk);
+			goto fail_mutex_unlock;
+		}
+	}
+
+	/* first enable vpss clocks */
+	vpss_enable_clock(VPSS_VPBE_CLOCK, 1);
+
+	/* First register a v4l2 device */
+	ret = v4l2_device_register(dev, &vpbe_dev->v4l2_dev);
+	if (ret) {
+		v4l2_err(dev->driver,
+			"Unable to register v4l2 device.\n");
+		goto fail_clk_put;
+	}
+	v4l2_info(&vpbe_dev->v4l2_dev, "vpbe v4l2 device registered\n");
+
+	err = bus_for_each_dev(&platform_bus_type, NULL, vpbe_dev,
+			       platform_device_get);
+	if (err < 0) {
+		ret = err;
+		goto fail_dev_unregister;
+	}
+
+	vpbe_dev->venc = venc_sub_dev_init(&vpbe_dev->v4l2_dev,
+					   vpbe_dev->cfg->venc.module_name);
+	/* register venc sub device */
+	if (vpbe_dev->venc == NULL) {
+		v4l2_err(&vpbe_dev->v4l2_dev,
+			"vpbe unable to init venc sub device\n");
+		ret = -ENODEV;
+		goto fail_dev_unregister;
+	}
+	/* initialize osd device */
+	osd_device = vpbe_dev->osd_device;
+
+	if (NULL != osd_device->ops.initialize) {
+		err = osd_device->ops.initialize(osd_device);
+		if (err) {
+			v4l2_err(&vpbe_dev->v4l2_dev,
+				 "unable to initialize the OSD device");
+			err = -ENOMEM;
+			goto fail_dev_unregister;
+		}
+	}
+
+	/*
+	 * Register any external encoders that are configured. At index 0 we
+	 * store venc sd index.
+	 */
+	num_encoders = vpbe_dev->cfg->num_ext_encoders + 1;
+	vpbe_dev->encoders = kmalloc(
+				sizeof(struct v4l2_subdev *)*num_encoders,
+				GFP_KERNEL);
+	if (NULL == vpbe_dev->encoders) {
+		v4l2_err(&vpbe_dev->v4l2_dev,
+			"unable to allocate memory for encoders sub devices");
+		ret = -ENOMEM;
+		goto fail_dev_unregister;
+	}
+
+	i2c_adap = i2c_get_adapter(vpbe_dev->cfg->i2c_adapter_id);
+	for (i = 0; i < (vpbe_dev->cfg->num_ext_encoders + 1); i++) {
+		if (i == 0) {
+			/* venc is at index 0 */
+			enc_subdev = &vpbe_dev->encoders[i];
+			*enc_subdev = vpbe_dev->venc;
+			continue;
+		}
+		enc_info = &vpbe_dev->cfg->ext_encoders[i];
+		if (enc_info->is_i2c) {
+			enc_subdev = &vpbe_dev->encoders[i];
+			*enc_subdev = v4l2_i2c_new_subdev_board(
+						&vpbe_dev->v4l2_dev, i2c_adap,
+						&enc_info->board_info, NULL);
+			if (*enc_subdev)
+				v4l2_info(&vpbe_dev->v4l2_dev,
+					  "v4l2 sub device %s registered\n",
+					  enc_info->module_name);
+			else {
+				v4l2_err(&vpbe_dev->v4l2_dev, "encoder %s"
+					 " failed to register",
+					 enc_info->module_name);
+				ret = -ENODEV;
+				goto fail_kfree_encoders;
+			}
+		} else
+			v4l2_warn(&vpbe_dev->v4l2_dev, "non-i2c encoders"
+				 " currently not supported");
+	}
+	/* Add amplifier subdevice for dm365 */
+	if ((strcmp(vpbe_dev->cfg->module_name, "dm365-vpbe-display") == 0) &&
+			vpbe_dev->cfg->amp != NULL) {
+		amp_info = vpbe_dev->cfg->amp;
+		if (amp_info->is_i2c) {
+			vpbe_dev->amp = v4l2_i2c_new_subdev_board(
+			&vpbe_dev->v4l2_dev, i2c_adap,
+			&amp_info->board_info, NULL);
+			if (!vpbe_dev->amp) {
+				v4l2_err(&vpbe_dev->v4l2_dev,
+					 "amplifier %s failed to register",
+					 amp_info->module_name);
+				ret = -ENODEV;
+				goto fail_kfree_encoders;
+			}
+			v4l2_info(&vpbe_dev->v4l2_dev,
+					  "v4l2 sub device %s registered\n",
+					  amp_info->module_name);
+		} else {
+			    vpbe_dev->amp = NULL;
+			    v4l2_warn(&vpbe_dev->v4l2_dev, "non-i2c amplifiers"
+			    " currently not supported");
+		}
+	} else {
+	    vpbe_dev->amp = NULL;
+	}
+
+	/* set the current encoder and output to that of venc by default */
+	vpbe_dev->current_sd_index = 0;
+	vpbe_dev->current_out_index = 0;
+
+	mutex_unlock(&vpbe_dev->lock);
+
+	printk(KERN_NOTICE "Setting default output to %s\n", def_output);
+	ret = vpbe_set_default_output(vpbe_dev);
+	if (ret) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "Failed to set default output %s",
+			 def_output);
+		return ret;
+	}
+
+	printk(KERN_NOTICE "Setting default mode to %s\n", def_mode);
+	ret = vpbe_set_default_mode(vpbe_dev);
+	if (ret) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "Failed to set default mode %s",
+			 def_mode);
+		return ret;
+	}
+	vpbe_dev->initialized = 1;
+	/* TBD handling of bootargs for default output and mode */
+	return 0;
+
+fail_kfree_encoders:
+	kfree(vpbe_dev->encoders);
+fail_dev_unregister:
+	v4l2_device_unregister(&vpbe_dev->v4l2_dev);
+fail_clk_put:
+	if (strcmp(vpbe_dev->cfg->module_name, "dm644x-vpbe-display") != 0) {
+		clk_disable_unprepare(vpbe_dev->dac_clk);
+		clk_put(vpbe_dev->dac_clk);
+	}
+fail_mutex_unlock:
+	mutex_unlock(&vpbe_dev->lock);
+	return ret;
+}
+
+/**
+ * vpbe_deinitialize() - de-initialize the vpbe display controller
+ * @dev - Master and slave device ptr
+ *
+ * vpbe_master and slave frame buffer devices calls this to de-initialize
+ * the display controller. It is called when master and slave device
+ * driver modules are removed and no longer requires the display controller.
+ */
+static void vpbe_deinitialize(struct device *dev, struct vpbe_device *vpbe_dev)
+{
+	v4l2_device_unregister(&vpbe_dev->v4l2_dev);
+	if (strcmp(vpbe_dev->cfg->module_name, "dm644x-vpbe-display") != 0) {
+		clk_disable_unprepare(vpbe_dev->dac_clk);
+		clk_put(vpbe_dev->dac_clk);
+	}
+
+	kfree(vpbe_dev->amp);
+	kfree(vpbe_dev->encoders);
+	vpbe_dev->initialized = 0;
+	/* disable vpss clocks */
+	vpss_enable_clock(VPSS_VPBE_CLOCK, 0);
+}
+
+static struct vpbe_device_ops vpbe_dev_ops = {
+	.g_cropcap = vpbe_g_cropcap,
+	.enum_outputs = vpbe_enum_outputs,
+	.set_output = vpbe_set_output,
+	.get_output = vpbe_get_output,
+	.s_dv_timings = vpbe_s_dv_timings,
+	.g_dv_timings = vpbe_g_dv_timings,
+	.enum_dv_timings = vpbe_enum_dv_timings,
+	.s_std = vpbe_s_std,
+	.g_std = vpbe_g_std,
+	.initialize = vpbe_initialize,
+	.deinitialize = vpbe_deinitialize,
+	.get_mode_info = vpbe_get_current_mode_info,
+	.set_mode = vpbe_set_mode,
+};
+
+static int vpbe_probe(struct platform_device *pdev)
+{
+	struct vpbe_device *vpbe_dev;
+	struct vpbe_config *cfg;
+	int ret = -EINVAL;
+
+	if (pdev->dev.platform_data == NULL) {
+		v4l2_err(pdev->dev.driver, "No platform data\n");
+		return -ENODEV;
+	}
+	cfg = pdev->dev.platform_data;
+
+	if (!cfg->module_name[0] ||
+	    !cfg->osd.module_name[0] ||
+	    !cfg->venc.module_name[0]) {
+		v4l2_err(pdev->dev.driver, "vpbe display module names not"
+			 " defined\n");
+		return ret;
+	}
+
+	vpbe_dev = kzalloc(sizeof(*vpbe_dev), GFP_KERNEL);
+	if (vpbe_dev == NULL) {
+		v4l2_err(pdev->dev.driver, "Unable to allocate memory"
+			 " for vpbe_device\n");
+		return -ENOMEM;
+	}
+	vpbe_dev->cfg = cfg;
+	vpbe_dev->ops = vpbe_dev_ops;
+	vpbe_dev->pdev = &pdev->dev;
+
+	if (cfg->outputs->num_modes > 0)
+		vpbe_dev->current_timings = vpbe_dev->cfg->outputs[0].modes[0];
+	else {
+		kfree(vpbe_dev);
+		return -ENODEV;
+	}
+
+	/* set the driver data in platform device */
+	platform_set_drvdata(pdev, vpbe_dev);
+	mutex_init(&vpbe_dev->lock);
+
+	return 0;
+}
+
+static int vpbe_remove(struct platform_device *device)
+{
+	struct vpbe_device *vpbe_dev = platform_get_drvdata(device);
+
+	kfree(vpbe_dev);
+
+	return 0;
+}
+
+static struct platform_driver vpbe_driver = {
+	.driver	= {
+		.name	= "vpbe_controller",
+	},
+	.probe = vpbe_probe,
+	.remove = vpbe_remove,
+};
+
+module_platform_driver(vpbe_driver);
diff --git a/drivers/media/platform/davinci/vpbe_display.c b/drivers/media/platform/davinci/vpbe_display.c
new file mode 100644
index 000000000..c4ab46f5b
--- /dev/null
+++ b/drivers/media/platform/davinci/vpbe_display.c
@@ -0,0 +1,1539 @@
+/*
+ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/string.h>
+#include <linux/wait.h>
+#include <linux/time.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/mm.h>
+#include <linux/mutex.h>
+#include <linux/videodev2.h>
+#include <linux/slab.h>
+
+#include <asm/pgtable.h>
+#include <mach/cputype.h>
+
+#include <media/v4l2-dev.h>
+#include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-device.h>
+#include <media/davinci/vpbe_display.h>
+#include <media/davinci/vpbe_types.h>
+#include <media/davinci/vpbe.h>
+#include <media/davinci/vpbe_venc.h>
+#include <media/davinci/vpbe_osd.h>
+#include "vpbe_venc_regs.h"
+
+#define VPBE_DISPLAY_DRIVER "vpbe-v4l2"
+
+static int debug;
+
+#define VPBE_DEFAULT_NUM_BUFS 3
+
+module_param(debug, int, 0644);
+
+static int vpbe_set_osd_display_params(struct vpbe_display *disp_dev,
+			struct vpbe_layer *layer);
+
+static int venc_is_second_field(struct vpbe_display *disp_dev)
+{
+	struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
+	int ret;
+	int val;
+
+	ret = v4l2_subdev_call(vpbe_dev->venc,
+			       core,
+			       ioctl,
+			       VENC_GET_FLD,
+			       &val);
+	if (ret < 0) {
+		v4l2_err(&vpbe_dev->v4l2_dev,
+			 "Error in getting Field ID 0\n");
+	}
+	return val;
+}
+
+static void vpbe_isr_even_field(struct vpbe_display *disp_obj,
+				struct vpbe_layer *layer)
+{
+	struct timespec timevalue;
+
+	if (layer->cur_frm == layer->next_frm)
+		return;
+	ktime_get_ts(&timevalue);
+	layer->cur_frm->vb.v4l2_buf.timestamp.tv_sec =
+		timevalue.tv_sec;
+	layer->cur_frm->vb.v4l2_buf.timestamp.tv_usec =
+		timevalue.tv_nsec / NSEC_PER_USEC;
+	vb2_buffer_done(&layer->cur_frm->vb, VB2_BUF_STATE_DONE);
+	/* Make cur_frm pointing to next_frm */
+	layer->cur_frm = layer->next_frm;
+}
+
+static void vpbe_isr_odd_field(struct vpbe_display *disp_obj,
+				struct vpbe_layer *layer)
+{
+	struct osd_state *osd_device = disp_obj->osd_device;
+	unsigned long addr;
+
+	spin_lock(&disp_obj->dma_queue_lock);
+	if (list_empty(&layer->dma_queue) ||
+		(layer->cur_frm != layer->next_frm)) {
+		spin_unlock(&disp_obj->dma_queue_lock);
+		return;
+	}
+	/*
+	 * one field is displayed configure
+	 * the next frame if it is available
+	 * otherwise hold on current frame
+	 * Get next from the buffer queue
+	 */
+	layer->next_frm = list_entry(layer->dma_queue.next,
+			  struct  vpbe_disp_buffer, list);
+	/* Remove that from the buffer queue */
+	list_del(&layer->next_frm->list);
+	spin_unlock(&disp_obj->dma_queue_lock);
+	/* Mark state of the frame to active */
+	layer->next_frm->vb.state = VB2_BUF_STATE_ACTIVE;
+	addr = vb2_dma_contig_plane_dma_addr(&layer->next_frm->vb, 0);
+	osd_device->ops.start_layer(osd_device,
+			layer->layer_info.id,
+			addr,
+			disp_obj->cbcr_ofst);
+}
+
+/* interrupt service routine */
+static irqreturn_t venc_isr(int irq, void *arg)
+{
+	struct vpbe_display *disp_dev = (struct vpbe_display *)arg;
+	struct vpbe_layer *layer;
+	static unsigned last_event;
+	unsigned event = 0;
+	int fid;
+	int i;
+
+	if ((NULL == arg) || (NULL == disp_dev->dev[0]))
+		return IRQ_HANDLED;
+
+	if (venc_is_second_field(disp_dev))
+		event |= VENC_SECOND_FIELD;
+	else
+		event |= VENC_FIRST_FIELD;
+
+	if (event == (last_event & ~VENC_END_OF_FRAME)) {
+		/*
+		* If the display is non-interlaced, then we need to flag the
+		* end-of-frame event at every interrupt regardless of the
+		* value of the FIDST bit.  We can conclude that the display is
+		* non-interlaced if the value of the FIDST bit is unchanged
+		* from the previous interrupt.
+		*/
+		event |= VENC_END_OF_FRAME;
+	} else if (event == VENC_SECOND_FIELD) {
+		/* end-of-frame for interlaced display */
+		event |= VENC_END_OF_FRAME;
+	}
+	last_event = event;
+
+	for (i = 0; i < VPBE_DISPLAY_MAX_DEVICES; i++) {
+		layer = disp_dev->dev[i];
+
+		if (!vb2_start_streaming_called(&layer->buffer_queue))
+			continue;
+
+		if (layer->layer_first_int) {
+			layer->layer_first_int = 0;
+			continue;
+		}
+		/* Check the field format */
+		if ((V4L2_FIELD_NONE == layer->pix_fmt.field) &&
+			(event & VENC_END_OF_FRAME)) {
+			/* Progressive mode */
+
+			vpbe_isr_even_field(disp_dev, layer);
+			vpbe_isr_odd_field(disp_dev, layer);
+		} else {
+		/* Interlaced mode */
+
+			layer->field_id ^= 1;
+			if (event & VENC_FIRST_FIELD)
+				fid = 0;
+			else
+				fid = 1;
+
+			/*
+			* If field id does not match with store
+			* field id
+			*/
+			if (fid != layer->field_id) {
+				/* Make them in sync */
+				layer->field_id = fid;
+				continue;
+			}
+			/*
+			* device field id and local field id are
+			* in sync. If this is even field
+			*/
+			if (0 == fid)
+				vpbe_isr_even_field(disp_dev, layer);
+			else  /* odd field */
+				vpbe_isr_odd_field(disp_dev, layer);
+		}
+	}
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * vpbe_buffer_prepare()
+ * This is the callback function called from vb2_qbuf() function
+ * the buffer is prepared and user space virtual address is converted into
+ * physical address
+ */
+static int vpbe_buffer_prepare(struct vb2_buffer *vb)
+{
+	struct vb2_queue *q = vb->vb2_queue;
+	struct vpbe_layer *layer = vb2_get_drv_priv(q);
+	struct vpbe_device *vpbe_dev = layer->disp_dev->vpbe_dev;
+	unsigned long addr;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
+				"vpbe_buffer_prepare\n");
+
+	vb2_set_plane_payload(vb, 0, layer->pix_fmt.sizeimage);
+	if (vb2_get_plane_payload(vb, 0) > vb2_plane_size(vb, 0))
+		return -EINVAL;
+
+	addr = vb2_dma_contig_plane_dma_addr(vb, 0);
+	if (!IS_ALIGNED(addr, 8)) {
+		v4l2_err(&vpbe_dev->v4l2_dev,
+			 "buffer_prepare:offset is not aligned to 32 bytes\n");
+		return -EINVAL;
+	}
+	return 0;
+}
+
+/*
+ * vpbe_buffer_setup()
+ * This function allocates memory for the buffers
+ */
+static int
+vpbe_buffer_queue_setup(struct vb2_queue *vq, const struct v4l2_format *fmt,
+			unsigned int *nbuffers, unsigned int *nplanes,
+			unsigned int sizes[], void *alloc_ctxs[])
+
+{
+	/* Get the file handle object and layer object */
+	struct vpbe_layer *layer = vb2_get_drv_priv(vq);
+	struct vpbe_device *vpbe_dev = layer->disp_dev->vpbe_dev;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "vpbe_buffer_setup\n");
+
+	if (fmt && fmt->fmt.pix.sizeimage < layer->pix_fmt.sizeimage)
+		return -EINVAL;
+
+	/* Store number of buffers allocated in numbuffer member */
+	if (vq->num_buffers + *nbuffers < VPBE_DEFAULT_NUM_BUFS)
+		*nbuffers = VPBE_DEFAULT_NUM_BUFS - vq->num_buffers;
+
+	*nplanes = 1;
+	sizes[0] = fmt ? fmt->fmt.pix.sizeimage : layer->pix_fmt.sizeimage;
+	alloc_ctxs[0] = layer->alloc_ctx;
+
+	return 0;
+}
+
+/*
+ * vpbe_buffer_queue()
+ * This function adds the buffer to DMA queue
+ */
+static void vpbe_buffer_queue(struct vb2_buffer *vb)
+{
+	/* Get the file handle object and layer object */
+	struct vpbe_disp_buffer *buf = container_of(vb,
+				struct vpbe_disp_buffer, vb);
+	struct vpbe_layer *layer = vb2_get_drv_priv(vb->vb2_queue);
+	struct vpbe_display *disp = layer->disp_dev;
+	struct vpbe_device *vpbe_dev = layer->disp_dev->vpbe_dev;
+	unsigned long flags;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
+			"vpbe_buffer_queue\n");
+
+	/* add the buffer to the DMA queue */
+	spin_lock_irqsave(&disp->dma_queue_lock, flags);
+	list_add_tail(&buf->list, &layer->dma_queue);
+	spin_unlock_irqrestore(&disp->dma_queue_lock, flags);
+}
+
+static int vpbe_start_streaming(struct vb2_queue *vq, unsigned int count)
+{
+	struct vpbe_layer *layer = vb2_get_drv_priv(vq);
+	struct osd_state *osd_device = layer->disp_dev->osd_device;
+	int ret;
+
+	 osd_device->ops.disable_layer(osd_device, layer->layer_info.id);
+
+	/* Get the next frame from the buffer queue */
+	layer->next_frm = layer->cur_frm = list_entry(layer->dma_queue.next,
+				struct vpbe_disp_buffer, list);
+	/* Remove buffer from the buffer queue */
+	list_del(&layer->cur_frm->list);
+	/* Mark state of the current frame to active */
+	layer->cur_frm->vb.state = VB2_BUF_STATE_ACTIVE;
+	/* Initialize field_id and started member */
+	layer->field_id = 0;
+
+	/* Set parameters in OSD and VENC */
+	ret = vpbe_set_osd_display_params(layer->disp_dev, layer);
+	if (ret < 0) {
+		struct vpbe_disp_buffer *buf, *tmp;
+
+		vb2_buffer_done(&layer->cur_frm->vb, VB2_BUF_STATE_QUEUED);
+		list_for_each_entry_safe(buf, tmp, &layer->dma_queue, list) {
+			list_del(&buf->list);
+			vb2_buffer_done(&buf->vb, VB2_BUF_STATE_QUEUED);
+		}
+
+		return ret;
+	}
+
+	/*
+	 * if request format is yuv420 semiplanar, need to
+	 * enable both video windows
+	 */
+	layer->layer_first_int = 1;
+
+	return ret;
+}
+
+static void vpbe_stop_streaming(struct vb2_queue *vq)
+{
+	struct vpbe_layer *layer = vb2_get_drv_priv(vq);
+	struct osd_state *osd_device = layer->disp_dev->osd_device;
+	struct vpbe_display *disp = layer->disp_dev;
+	unsigned long flags;
+
+	if (!vb2_is_streaming(vq))
+		return;
+
+	osd_device->ops.disable_layer(osd_device, layer->layer_info.id);
+
+	/* release all active buffers */
+	spin_lock_irqsave(&disp->dma_queue_lock, flags);
+	if (layer->cur_frm == layer->next_frm) {
+		vb2_buffer_done(&layer->cur_frm->vb, VB2_BUF_STATE_ERROR);
+	} else {
+		if (layer->cur_frm != NULL)
+			vb2_buffer_done(&layer->cur_frm->vb,
+					VB2_BUF_STATE_ERROR);
+		if (layer->next_frm != NULL)
+			vb2_buffer_done(&layer->next_frm->vb,
+					VB2_BUF_STATE_ERROR);
+	}
+
+	while (!list_empty(&layer->dma_queue)) {
+		layer->next_frm = list_entry(layer->dma_queue.next,
+						struct vpbe_disp_buffer, list);
+		list_del(&layer->next_frm->list);
+		vb2_buffer_done(&layer->next_frm->vb, VB2_BUF_STATE_ERROR);
+	}
+	spin_unlock_irqrestore(&disp->dma_queue_lock, flags);
+}
+
+static struct vb2_ops video_qops = {
+	.queue_setup = vpbe_buffer_queue_setup,
+	.wait_prepare = vb2_ops_wait_prepare,
+	.wait_finish = vb2_ops_wait_finish,
+	.buf_prepare = vpbe_buffer_prepare,
+	.start_streaming = vpbe_start_streaming,
+	.stop_streaming = vpbe_stop_streaming,
+	.buf_queue = vpbe_buffer_queue,
+};
+
+static
+struct vpbe_layer*
+_vpbe_display_get_other_win_layer(struct vpbe_display *disp_dev,
+			struct vpbe_layer *layer)
+{
+	enum vpbe_display_device_id thiswin, otherwin;
+	thiswin = layer->device_id;
+
+	otherwin = (thiswin == VPBE_DISPLAY_DEVICE_0) ?
+	VPBE_DISPLAY_DEVICE_1 : VPBE_DISPLAY_DEVICE_0;
+	return disp_dev->dev[otherwin];
+}
+
+static int vpbe_set_osd_display_params(struct vpbe_display *disp_dev,
+			struct vpbe_layer *layer)
+{
+	struct osd_layer_config *cfg  = &layer->layer_info.config;
+	struct osd_state *osd_device = disp_dev->osd_device;
+	struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
+	unsigned long addr;
+	int ret;
+
+	addr = vb2_dma_contig_plane_dma_addr(&layer->cur_frm->vb, 0);
+	/* Set address in the display registers */
+	osd_device->ops.start_layer(osd_device,
+				    layer->layer_info.id,
+				    addr,
+				    disp_dev->cbcr_ofst);
+
+	ret = osd_device->ops.enable_layer(osd_device,
+				layer->layer_info.id, 0);
+	if (ret < 0) {
+		v4l2_err(&vpbe_dev->v4l2_dev,
+			"Error in enabling osd window layer 0\n");
+		return -1;
+	}
+
+	/* Enable the window */
+	layer->layer_info.enable = 1;
+	if (cfg->pixfmt == PIXFMT_NV12) {
+		struct vpbe_layer *otherlayer =
+			_vpbe_display_get_other_win_layer(disp_dev, layer);
+
+		ret = osd_device->ops.enable_layer(osd_device,
+				otherlayer->layer_info.id, 1);
+		if (ret < 0) {
+			v4l2_err(&vpbe_dev->v4l2_dev,
+				"Error in enabling osd window layer 1\n");
+			return -1;
+		}
+		otherlayer->layer_info.enable = 1;
+	}
+	return 0;
+}
+
+static void
+vpbe_disp_calculate_scale_factor(struct vpbe_display *disp_dev,
+			struct vpbe_layer *layer,
+			int expected_xsize, int expected_ysize)
+{
+	struct display_layer_info *layer_info = &layer->layer_info;
+	struct v4l2_pix_format *pixfmt = &layer->pix_fmt;
+	struct osd_layer_config *cfg  = &layer->layer_info.config;
+	struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
+	int calculated_xsize;
+	int h_exp = 0;
+	int v_exp = 0;
+	int h_scale;
+	int v_scale;
+
+	v4l2_std_id standard_id = vpbe_dev->current_timings.std_id;
+
+	/*
+	 * Application initially set the image format. Current display
+	 * size is obtained from the vpbe display controller. expected_xsize
+	 * and expected_ysize are set through S_CROP ioctl. Based on this,
+	 * driver will calculate the scale factors for vertical and
+	 * horizontal direction so that the image is displayed scaled
+	 * and expanded. Application uses expansion to display the image
+	 * in a square pixel. Otherwise it is displayed using displays
+	 * pixel aspect ratio.It is expected that application chooses
+	 * the crop coordinates for cropped or scaled display. if crop
+	 * size is less than the image size, it is displayed cropped or
+	 * it is displayed scaled and/or expanded.
+	 *
+	 * to begin with, set the crop window same as expected. Later we
+	 * will override with scaled window size
+	 */
+
+	cfg->xsize = pixfmt->width;
+	cfg->ysize = pixfmt->height;
+	layer_info->h_zoom = ZOOM_X1;	/* no horizontal zoom */
+	layer_info->v_zoom = ZOOM_X1;	/* no horizontal zoom */
+	layer_info->h_exp = H_EXP_OFF;	/* no horizontal zoom */
+	layer_info->v_exp = V_EXP_OFF;	/* no horizontal zoom */
+
+	if (pixfmt->width < expected_xsize) {
+		h_scale = vpbe_dev->current_timings.xres / pixfmt->width;
+		if (h_scale < 2)
+			h_scale = 1;
+		else if (h_scale >= 4)
+			h_scale = 4;
+		else
+			h_scale = 2;
+		cfg->xsize *= h_scale;
+		if (cfg->xsize < expected_xsize) {
+			if ((standard_id & V4L2_STD_525_60) ||
+			(standard_id & V4L2_STD_625_50)) {
+				calculated_xsize = (cfg->xsize *
+					VPBE_DISPLAY_H_EXP_RATIO_N) /
+					VPBE_DISPLAY_H_EXP_RATIO_D;
+				if (calculated_xsize <= expected_xsize) {
+					h_exp = 1;
+					cfg->xsize = calculated_xsize;
+				}
+			}
+		}
+		if (h_scale == 2)
+			layer_info->h_zoom = ZOOM_X2;
+		else if (h_scale == 4)
+			layer_info->h_zoom = ZOOM_X4;
+		if (h_exp)
+			layer_info->h_exp = H_EXP_9_OVER_8;
+	} else {
+		/* no scaling, only cropping. Set display area to crop area */
+		cfg->xsize = expected_xsize;
+	}
+
+	if (pixfmt->height < expected_ysize) {
+		v_scale = expected_ysize / pixfmt->height;
+		if (v_scale < 2)
+			v_scale = 1;
+		else if (v_scale >= 4)
+			v_scale = 4;
+		else
+			v_scale = 2;
+		cfg->ysize *= v_scale;
+		if (cfg->ysize < expected_ysize) {
+			if ((standard_id & V4L2_STD_625_50)) {
+				calculated_xsize = (cfg->ysize *
+					VPBE_DISPLAY_V_EXP_RATIO_N) /
+					VPBE_DISPLAY_V_EXP_RATIO_D;
+				if (calculated_xsize <= expected_ysize) {
+					v_exp = 1;
+					cfg->ysize = calculated_xsize;
+				}
+			}
+		}
+		if (v_scale == 2)
+			layer_info->v_zoom = ZOOM_X2;
+		else if (v_scale == 4)
+			layer_info->v_zoom = ZOOM_X4;
+		if (v_exp)
+			layer_info->h_exp = V_EXP_6_OVER_5;
+	} else {
+		/* no scaling, only cropping. Set display area to crop area */
+		cfg->ysize = expected_ysize;
+	}
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
+		"crop display xsize = %d, ysize = %d\n",
+		cfg->xsize, cfg->ysize);
+}
+
+static void vpbe_disp_adj_position(struct vpbe_display *disp_dev,
+			struct vpbe_layer *layer,
+			int top, int left)
+{
+	struct osd_layer_config *cfg = &layer->layer_info.config;
+	struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
+
+	cfg->xpos = min((unsigned int)left,
+			vpbe_dev->current_timings.xres - cfg->xsize);
+	cfg->ypos = min((unsigned int)top,
+			vpbe_dev->current_timings.yres - cfg->ysize);
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
+		"new xpos = %d, ypos = %d\n",
+		cfg->xpos, cfg->ypos);
+}
+
+static void vpbe_disp_check_window_params(struct vpbe_display *disp_dev,
+			struct v4l2_rect *c)
+{
+	struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
+
+	if ((c->width == 0) ||
+	  ((c->width + c->left) > vpbe_dev->current_timings.xres))
+		c->width = vpbe_dev->current_timings.xres - c->left;
+
+	if ((c->height == 0) || ((c->height + c->top) >
+	  vpbe_dev->current_timings.yres))
+		c->height = vpbe_dev->current_timings.yres - c->top;
+
+	/* window height must be even for interlaced display */
+	if (vpbe_dev->current_timings.interlaced)
+		c->height &= (~0x01);
+
+}
+
+/**
+ * vpbe_try_format()
+ * If user application provides width and height, and have bytesperline set
+ * to zero, driver calculates bytesperline and sizeimage based on hardware
+ * limits.
+ */
+static int vpbe_try_format(struct vpbe_display *disp_dev,
+			struct v4l2_pix_format *pixfmt, int check)
+{
+	struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
+	int min_height = 1;
+	int min_width = 32;
+	int max_height;
+	int max_width;
+	int bpp;
+
+	if ((pixfmt->pixelformat != V4L2_PIX_FMT_UYVY) &&
+	    (pixfmt->pixelformat != V4L2_PIX_FMT_NV12))
+		/* choose default as V4L2_PIX_FMT_UYVY */
+		pixfmt->pixelformat = V4L2_PIX_FMT_UYVY;
+
+	/* Check the field format */
+	if ((pixfmt->field != V4L2_FIELD_INTERLACED) &&
+		(pixfmt->field != V4L2_FIELD_NONE)) {
+		if (vpbe_dev->current_timings.interlaced)
+			pixfmt->field = V4L2_FIELD_INTERLACED;
+		else
+			pixfmt->field = V4L2_FIELD_NONE;
+	}
+
+	if (pixfmt->field == V4L2_FIELD_INTERLACED)
+		min_height = 2;
+
+	if (pixfmt->pixelformat == V4L2_PIX_FMT_NV12)
+		bpp = 1;
+	else
+		bpp = 2;
+
+	max_width = vpbe_dev->current_timings.xres;
+	max_height = vpbe_dev->current_timings.yres;
+
+	min_width /= bpp;
+
+	if (!pixfmt->width || (pixfmt->width < min_width) ||
+		(pixfmt->width > max_width)) {
+		pixfmt->width = vpbe_dev->current_timings.xres;
+	}
+
+	if (!pixfmt->height || (pixfmt->height  < min_height) ||
+		(pixfmt->height  > max_height)) {
+		pixfmt->height = vpbe_dev->current_timings.yres;
+	}
+
+	if (pixfmt->bytesperline < (pixfmt->width * bpp))
+		pixfmt->bytesperline = pixfmt->width * bpp;
+
+	/* Make the bytesperline 32 byte aligned */
+	pixfmt->bytesperline = ((pixfmt->width * bpp + 31) & ~31);
+
+	if (pixfmt->pixelformat == V4L2_PIX_FMT_NV12)
+		pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height +
+				(pixfmt->bytesperline * pixfmt->height >> 1);
+	else
+		pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height;
+
+	return 0;
+}
+
+static int vpbe_display_querycap(struct file *file, void  *priv,
+			       struct v4l2_capability *cap)
+{
+	struct vpbe_layer *layer = video_drvdata(file);
+	struct vpbe_device *vpbe_dev = layer->disp_dev->vpbe_dev;
+
+	cap->device_caps = V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_STREAMING;
+	cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS;
+	snprintf(cap->driver, sizeof(cap->driver), "%s",
+		dev_name(vpbe_dev->pdev));
+	snprintf(cap->bus_info, sizeof(cap->bus_info), "platform:%s",
+		 dev_name(vpbe_dev->pdev));
+	strlcpy(cap->card, vpbe_dev->cfg->module_name, sizeof(cap->card));
+
+	return 0;
+}
+
+static int vpbe_display_s_crop(struct file *file, void *priv,
+			     const struct v4l2_crop *crop)
+{
+	struct vpbe_layer *layer = video_drvdata(file);
+	struct vpbe_display *disp_dev = layer->disp_dev;
+	struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
+	struct osd_layer_config *cfg = &layer->layer_info.config;
+	struct osd_state *osd_device = disp_dev->osd_device;
+	struct v4l2_rect rect = crop->c;
+	int ret;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
+		"VIDIOC_S_CROP, layer id = %d\n", layer->device_id);
+
+	if (crop->type != V4L2_BUF_TYPE_VIDEO_OUTPUT) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "Invalid buf type\n");
+		return -EINVAL;
+	}
+
+	if (rect.top < 0)
+		rect.top = 0;
+	if (rect.left < 0)
+		rect.left = 0;
+
+	vpbe_disp_check_window_params(disp_dev, &rect);
+
+	osd_device->ops.get_layer_config(osd_device,
+			layer->layer_info.id, cfg);
+
+	vpbe_disp_calculate_scale_factor(disp_dev, layer,
+					rect.width,
+					rect.height);
+	vpbe_disp_adj_position(disp_dev, layer, rect.top,
+					rect.left);
+	ret = osd_device->ops.set_layer_config(osd_device,
+				layer->layer_info.id, cfg);
+	if (ret < 0) {
+		v4l2_err(&vpbe_dev->v4l2_dev,
+			"Error in set layer config:\n");
+		return -EINVAL;
+	}
+
+	/* apply zooming and h or v expansion */
+	osd_device->ops.set_zoom(osd_device,
+			layer->layer_info.id,
+			layer->layer_info.h_zoom,
+			layer->layer_info.v_zoom);
+	ret = osd_device->ops.set_vid_expansion(osd_device,
+			layer->layer_info.h_exp,
+			layer->layer_info.v_exp);
+	if (ret < 0) {
+		v4l2_err(&vpbe_dev->v4l2_dev,
+		"Error in set vid expansion:\n");
+		return -EINVAL;
+	}
+
+	if ((layer->layer_info.h_zoom != ZOOM_X1) ||
+		(layer->layer_info.v_zoom != ZOOM_X1) ||
+		(layer->layer_info.h_exp != H_EXP_OFF) ||
+		(layer->layer_info.v_exp != V_EXP_OFF))
+		/* Enable expansion filter */
+		osd_device->ops.set_interpolation_filter(osd_device, 1);
+	else
+		osd_device->ops.set_interpolation_filter(osd_device, 0);
+
+	return 0;
+}
+
+static int vpbe_display_g_crop(struct file *file, void *priv,
+			     struct v4l2_crop *crop)
+{
+	struct vpbe_layer *layer = video_drvdata(file);
+	struct osd_layer_config *cfg = &layer->layer_info.config;
+	struct vpbe_device *vpbe_dev = layer->disp_dev->vpbe_dev;
+	struct osd_state *osd_device = layer->disp_dev->osd_device;
+	struct v4l2_rect *rect = &crop->c;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
+			"VIDIOC_G_CROP, layer id = %d\n",
+			layer->device_id);
+
+	if (crop->type != V4L2_BUF_TYPE_VIDEO_OUTPUT) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "Invalid buf type\n");
+		return -EINVAL;
+	}
+	osd_device->ops.get_layer_config(osd_device,
+				layer->layer_info.id, cfg);
+	rect->top = cfg->ypos;
+	rect->left = cfg->xpos;
+	rect->width = cfg->xsize;
+	rect->height = cfg->ysize;
+
+	return 0;
+}
+
+static int vpbe_display_cropcap(struct file *file, void *priv,
+			      struct v4l2_cropcap *cropcap)
+{
+	struct vpbe_layer *layer = video_drvdata(file);
+	struct vpbe_device *vpbe_dev = layer->disp_dev->vpbe_dev;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_CROPCAP ioctl\n");
+
+	cropcap->type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
+	cropcap->bounds.left = 0;
+	cropcap->bounds.top = 0;
+	cropcap->bounds.width = vpbe_dev->current_timings.xres;
+	cropcap->bounds.height = vpbe_dev->current_timings.yres;
+	cropcap->pixelaspect = vpbe_dev->current_timings.aspect;
+	cropcap->defrect = cropcap->bounds;
+	return 0;
+}
+
+static int vpbe_display_g_fmt(struct file *file, void *priv,
+				struct v4l2_format *fmt)
+{
+	struct vpbe_layer *layer = video_drvdata(file);
+	struct vpbe_device *vpbe_dev = layer->disp_dev->vpbe_dev;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
+			"VIDIOC_G_FMT, layer id = %d\n",
+			layer->device_id);
+
+	/* If buffer type is video output */
+	if (V4L2_BUF_TYPE_VIDEO_OUTPUT != fmt->type) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "invalid type\n");
+		return -EINVAL;
+	}
+	/* Fill in the information about format */
+	fmt->fmt.pix = layer->pix_fmt;
+
+	return 0;
+}
+
+static int vpbe_display_enum_fmt(struct file *file, void  *priv,
+				   struct v4l2_fmtdesc *fmt)
+{
+	struct vpbe_layer *layer = video_drvdata(file);
+	struct vpbe_device *vpbe_dev = layer->disp_dev->vpbe_dev;
+	unsigned int index = 0;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
+				"VIDIOC_ENUM_FMT, layer id = %d\n",
+				layer->device_id);
+	if (fmt->index > 1) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "Invalid format index\n");
+		return -EINVAL;
+	}
+
+	/* Fill in the information about format */
+	index = fmt->index;
+	memset(fmt, 0, sizeof(*fmt));
+	fmt->index = index;
+	fmt->type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
+	if (index == 0) {
+		strcpy(fmt->description, "YUV 4:2:2 - UYVY");
+		fmt->pixelformat = V4L2_PIX_FMT_UYVY;
+	} else {
+		strcpy(fmt->description, "Y/CbCr 4:2:0");
+		fmt->pixelformat = V4L2_PIX_FMT_NV12;
+	}
+
+	return 0;
+}
+
+static int vpbe_display_s_fmt(struct file *file, void *priv,
+				struct v4l2_format *fmt)
+{
+	struct vpbe_layer *layer = video_drvdata(file);
+	struct vpbe_display *disp_dev = layer->disp_dev;
+	struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
+	struct osd_layer_config *cfg  = &layer->layer_info.config;
+	struct v4l2_pix_format *pixfmt = &fmt->fmt.pix;
+	struct osd_state *osd_device = disp_dev->osd_device;
+	int ret;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
+			"VIDIOC_S_FMT, layer id = %d\n",
+			layer->device_id);
+
+	if (vb2_is_busy(&layer->buffer_queue))
+		return -EBUSY;
+
+	if (V4L2_BUF_TYPE_VIDEO_OUTPUT != fmt->type) {
+		v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "invalid type\n");
+		return -EINVAL;
+	}
+	/* Check for valid pixel format */
+	ret = vpbe_try_format(disp_dev, pixfmt, 1);
+	if (ret)
+		return ret;
+
+	/* YUV420 is requested, check availability of the
+	other video window */
+
+	layer->pix_fmt = *pixfmt;
+	if (pixfmt->pixelformat == V4L2_PIX_FMT_NV12) {
+		struct vpbe_layer *otherlayer;
+
+		otherlayer = _vpbe_display_get_other_win_layer(disp_dev, layer);
+		/* if other layer is available, only
+		 * claim it, do not configure it
+		 */
+		ret = osd_device->ops.request_layer(osd_device,
+						    otherlayer->layer_info.id);
+		if (ret < 0) {
+			v4l2_err(&vpbe_dev->v4l2_dev,
+				 "Display Manager failed to allocate layer\n");
+			return -EBUSY;
+		}
+	}
+
+	/* Get osd layer config */
+	osd_device->ops.get_layer_config(osd_device,
+			layer->layer_info.id, cfg);
+	/* Store the pixel format in the layer object */
+	cfg->xsize = pixfmt->width;
+	cfg->ysize = pixfmt->height;
+	cfg->line_length = pixfmt->bytesperline;
+	cfg->ypos = 0;
+	cfg->xpos = 0;
+	cfg->interlaced = vpbe_dev->current_timings.interlaced;
+
+	if (V4L2_PIX_FMT_UYVY == pixfmt->pixelformat)
+		cfg->pixfmt = PIXFMT_YCBCRI;
+
+	/* Change of the default pixel format for both video windows */
+	if (V4L2_PIX_FMT_NV12 == pixfmt->pixelformat) {
+		struct vpbe_layer *otherlayer;
+		cfg->pixfmt = PIXFMT_NV12;
+		otherlayer = _vpbe_display_get_other_win_layer(disp_dev,
+								layer);
+		otherlayer->layer_info.config.pixfmt = PIXFMT_NV12;
+	}
+
+	/* Set the layer config in the osd window */
+	ret = osd_device->ops.set_layer_config(osd_device,
+				layer->layer_info.id, cfg);
+	if (ret < 0) {
+		v4l2_err(&vpbe_dev->v4l2_dev,
+				"Error in S_FMT params:\n");
+		return -EINVAL;
+	}
+
+	/* Readback and fill the local copy of current pix format */
+	osd_device->ops.get_layer_config(osd_device,
+			layer->layer_info.id, cfg);
+
+	return 0;
+}
+
+static int vpbe_display_try_fmt(struct file *file, void *priv,
+				  struct v4l2_format *fmt)
+{
+	struct vpbe_layer *layer = video_drvdata(file);
+	struct vpbe_display *disp_dev = layer->disp_dev;
+	struct vpbe_device *vpbe_dev = layer->disp_dev->vpbe_dev;
+	struct v4l2_pix_format *pixfmt = &fmt->fmt.pix;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_TRY_FMT\n");
+
+	if (V4L2_BUF_TYPE_VIDEO_OUTPUT != fmt->type) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "invalid type\n");
+		return -EINVAL;
+	}
+
+	/* Check for valid field format */
+	return  vpbe_try_format(disp_dev, pixfmt, 0);
+
+}
+
+/**
+ * vpbe_display_s_std - Set the given standard in the encoder
+ *
+ * Sets the standard if supported by the current encoder. Return the status.
+ * 0 - success & -EINVAL on error
+ */
+static int vpbe_display_s_std(struct file *file, void *priv,
+				v4l2_std_id std_id)
+{
+	struct vpbe_layer *layer = video_drvdata(file);
+	struct vpbe_device *vpbe_dev = layer->disp_dev->vpbe_dev;
+	int ret;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_S_STD\n");
+
+	if (vb2_is_busy(&layer->buffer_queue))
+		return -EBUSY;
+
+	if (NULL != vpbe_dev->ops.s_std) {
+		ret = vpbe_dev->ops.s_std(vpbe_dev, std_id);
+		if (ret) {
+			v4l2_err(&vpbe_dev->v4l2_dev,
+			"Failed to set standard for sub devices\n");
+			return -EINVAL;
+		}
+	} else {
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/**
+ * vpbe_display_g_std - Get the standard in the current encoder
+ *
+ * Get the standard in the current encoder. Return the status. 0 - success
+ * -EINVAL on error
+ */
+static int vpbe_display_g_std(struct file *file, void *priv,
+				v4l2_std_id *std_id)
+{
+	struct vpbe_layer *layer = video_drvdata(file);
+	struct vpbe_device *vpbe_dev = layer->disp_dev->vpbe_dev;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,	"VIDIOC_G_STD\n");
+
+	/* Get the standard from the current encoder */
+	if (vpbe_dev->current_timings.timings_type & VPBE_ENC_STD) {
+		*std_id = vpbe_dev->current_timings.std_id;
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+/**
+ * vpbe_display_enum_output - enumerate outputs
+ *
+ * Enumerates the outputs available at the vpbe display
+ * returns the status, -EINVAL if end of output list
+ */
+static int vpbe_display_enum_output(struct file *file, void *priv,
+				    struct v4l2_output *output)
+{
+	struct vpbe_layer *layer = video_drvdata(file);
+	struct vpbe_device *vpbe_dev = layer->disp_dev->vpbe_dev;
+	int ret;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,	"VIDIOC_ENUM_OUTPUT\n");
+
+	/* Enumerate outputs */
+
+	if (NULL == vpbe_dev->ops.enum_outputs)
+		return -EINVAL;
+
+	ret = vpbe_dev->ops.enum_outputs(vpbe_dev, output);
+	if (ret) {
+		v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
+			"Failed to enumerate outputs\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/**
+ * vpbe_display_s_output - Set output to
+ * the output specified by the index
+ */
+static int vpbe_display_s_output(struct file *file, void *priv,
+				unsigned int i)
+{
+	struct vpbe_layer *layer = video_drvdata(file);
+	struct vpbe_device *vpbe_dev = layer->disp_dev->vpbe_dev;
+	int ret;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,	"VIDIOC_S_OUTPUT\n");
+
+	if (vb2_is_busy(&layer->buffer_queue))
+		return -EBUSY;
+
+	if (NULL == vpbe_dev->ops.set_output)
+		return -EINVAL;
+
+	ret = vpbe_dev->ops.set_output(vpbe_dev, i);
+	if (ret) {
+		v4l2_err(&vpbe_dev->v4l2_dev,
+			"Failed to set output for sub devices\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/**
+ * vpbe_display_g_output - Get output from subdevice
+ * for a given by the index
+ */
+static int vpbe_display_g_output(struct file *file, void *priv,
+				unsigned int *i)
+{
+	struct vpbe_layer *layer = video_drvdata(file);
+	struct vpbe_device *vpbe_dev = layer->disp_dev->vpbe_dev;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_G_OUTPUT\n");
+	/* Get the standard from the current encoder */
+	*i = vpbe_dev->current_out_index;
+
+	return 0;
+}
+
+/**
+ * vpbe_display_enum_dv_timings - Enumerate the dv timings
+ *
+ * enum the timings in the current encoder. Return the status. 0 - success
+ * -EINVAL on error
+ */
+static int
+vpbe_display_enum_dv_timings(struct file *file, void *priv,
+			struct v4l2_enum_dv_timings *timings)
+{
+	struct vpbe_layer *layer = video_drvdata(file);
+	struct vpbe_device *vpbe_dev = layer->disp_dev->vpbe_dev;
+	int ret;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_ENUM_DV_TIMINGS\n");
+
+	/* Enumerate outputs */
+	if (NULL == vpbe_dev->ops.enum_dv_timings)
+		return -EINVAL;
+
+	ret = vpbe_dev->ops.enum_dv_timings(vpbe_dev, timings);
+	if (ret) {
+		v4l2_err(&vpbe_dev->v4l2_dev,
+			"Failed to enumerate dv timings info\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/**
+ * vpbe_display_s_dv_timings - Set the dv timings
+ *
+ * Set the timings in the current encoder. Return the status. 0 - success
+ * -EINVAL on error
+ */
+static int
+vpbe_display_s_dv_timings(struct file *file, void *priv,
+				struct v4l2_dv_timings *timings)
+{
+	struct vpbe_layer *layer = video_drvdata(file);
+	struct vpbe_device *vpbe_dev = layer->disp_dev->vpbe_dev;
+	int ret;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_S_DV_TIMINGS\n");
+
+	if (vb2_is_busy(&layer->buffer_queue))
+		return -EBUSY;
+
+	/* Set the given standard in the encoder */
+	if (!vpbe_dev->ops.s_dv_timings)
+		return -EINVAL;
+
+	ret = vpbe_dev->ops.s_dv_timings(vpbe_dev, timings);
+	if (ret) {
+		v4l2_err(&vpbe_dev->v4l2_dev,
+			"Failed to set the dv timings info\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/**
+ * vpbe_display_g_dv_timings - Set the dv timings
+ *
+ * Get the timings in the current encoder. Return the status. 0 - success
+ * -EINVAL on error
+ */
+static int
+vpbe_display_g_dv_timings(struct file *file, void *priv,
+				struct v4l2_dv_timings *dv_timings)
+{
+	struct vpbe_layer *layer = video_drvdata(file);
+	struct vpbe_device *vpbe_dev = layer->disp_dev->vpbe_dev;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_G_DV_TIMINGS\n");
+
+	/* Get the given standard in the encoder */
+
+	if (vpbe_dev->current_timings.timings_type &
+				VPBE_ENC_DV_TIMINGS) {
+		*dv_timings = vpbe_dev->current_timings.dv_timings;
+	} else {
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/*
+ * vpbe_display_open()
+ * It creates object of file handle structure and stores it in private_data
+ * member of filepointer
+ */
+static int vpbe_display_open(struct file *file)
+{
+	struct vpbe_layer *layer = video_drvdata(file);
+	struct vpbe_display *disp_dev = layer->disp_dev;
+	struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
+	struct osd_state *osd_device = disp_dev->osd_device;
+	int err;
+
+	/* creating context for file descriptor */
+	err = v4l2_fh_open(file);
+	if (err) {
+		v4l2_err(&vpbe_dev->v4l2_dev, "v4l2_fh_open failed\n");
+		return err;
+	}
+
+	/* leaving if layer is already initialized */
+	if (!v4l2_fh_is_singular_file(file))
+		return err;
+
+	if (!layer->usrs) {
+		if (mutex_lock_interruptible(&layer->opslock))
+			return -ERESTARTSYS;
+		/* First claim the layer for this device */
+		err = osd_device->ops.request_layer(osd_device,
+						layer->layer_info.id);
+		mutex_unlock(&layer->opslock);
+		if (err < 0) {
+			/* Couldn't get layer */
+			v4l2_err(&vpbe_dev->v4l2_dev,
+				"Display Manager failed to allocate layer\n");
+			v4l2_fh_release(file);
+			return -EINVAL;
+		}
+	}
+	/* Increment layer usrs counter */
+	layer->usrs++;
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
+			"vpbe display device opened successfully\n");
+	return 0;
+}
+
+/*
+ * vpbe_display_release()
+ * This function deletes buffer queue, frees the buffers and the davinci
+ * display file * handle
+ */
+static int vpbe_display_release(struct file *file)
+{
+	struct vpbe_layer *layer = video_drvdata(file);
+	struct osd_layer_config *cfg  = &layer->layer_info.config;
+	struct vpbe_display *disp_dev = layer->disp_dev;
+	struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
+	struct osd_state *osd_device = disp_dev->osd_device;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "vpbe_display_release\n");
+
+	mutex_lock(&layer->opslock);
+
+	osd_device->ops.disable_layer(osd_device,
+			layer->layer_info.id);
+	/* Decrement layer usrs counter */
+	layer->usrs--;
+	/* If this file handle has initialize encoder device, reset it */
+	if (!layer->usrs) {
+		if (cfg->pixfmt == PIXFMT_NV12) {
+			struct vpbe_layer *otherlayer;
+			otherlayer =
+			_vpbe_display_get_other_win_layer(disp_dev, layer);
+			osd_device->ops.disable_layer(osd_device,
+					otherlayer->layer_info.id);
+			osd_device->ops.release_layer(osd_device,
+					otherlayer->layer_info.id);
+		}
+		osd_device->ops.disable_layer(osd_device,
+				layer->layer_info.id);
+		osd_device->ops.release_layer(osd_device,
+				layer->layer_info.id);
+	}
+
+	_vb2_fop_release(file, NULL);
+	mutex_unlock(&layer->opslock);
+
+	disp_dev->cbcr_ofst = 0;
+
+	return 0;
+}
+
+/* vpbe capture ioctl operations */
+static const struct v4l2_ioctl_ops vpbe_ioctl_ops = {
+	.vidioc_querycap	 = vpbe_display_querycap,
+	.vidioc_g_fmt_vid_out    = vpbe_display_g_fmt,
+	.vidioc_enum_fmt_vid_out = vpbe_display_enum_fmt,
+	.vidioc_s_fmt_vid_out    = vpbe_display_s_fmt,
+	.vidioc_try_fmt_vid_out  = vpbe_display_try_fmt,
+
+	.vidioc_reqbufs		 = vb2_ioctl_reqbufs,
+	.vidioc_create_bufs	 = vb2_ioctl_create_bufs,
+	.vidioc_querybuf	 = vb2_ioctl_querybuf,
+	.vidioc_qbuf		 = vb2_ioctl_qbuf,
+	.vidioc_dqbuf		 = vb2_ioctl_dqbuf,
+	.vidioc_streamon	 = vb2_ioctl_streamon,
+	.vidioc_streamoff	 = vb2_ioctl_streamoff,
+	.vidioc_expbuf		 = vb2_ioctl_expbuf,
+
+	.vidioc_cropcap		 = vpbe_display_cropcap,
+	.vidioc_g_crop		 = vpbe_display_g_crop,
+	.vidioc_s_crop		 = vpbe_display_s_crop,
+
+	.vidioc_s_std		 = vpbe_display_s_std,
+	.vidioc_g_std		 = vpbe_display_g_std,
+
+	.vidioc_enum_output	 = vpbe_display_enum_output,
+	.vidioc_s_output	 = vpbe_display_s_output,
+	.vidioc_g_output	 = vpbe_display_g_output,
+
+	.vidioc_s_dv_timings	 = vpbe_display_s_dv_timings,
+	.vidioc_g_dv_timings	 = vpbe_display_g_dv_timings,
+	.vidioc_enum_dv_timings	 = vpbe_display_enum_dv_timings,
+};
+
+static struct v4l2_file_operations vpbe_fops = {
+	.owner = THIS_MODULE,
+	.open = vpbe_display_open,
+	.release = vpbe_display_release,
+	.unlocked_ioctl = video_ioctl2,
+	.mmap = vb2_fop_mmap,
+	.poll =  vb2_fop_poll,
+};
+
+static int vpbe_device_get(struct device *dev, void *data)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct vpbe_display *vpbe_disp  = data;
+
+	if (strcmp("vpbe_controller", pdev->name) == 0)
+		vpbe_disp->vpbe_dev = platform_get_drvdata(pdev);
+
+	if (strstr(pdev->name, "vpbe-osd") != NULL)
+		vpbe_disp->osd_device = platform_get_drvdata(pdev);
+
+	return 0;
+}
+
+static int init_vpbe_layer(int i, struct vpbe_display *disp_dev,
+			   struct platform_device *pdev)
+{
+	struct vpbe_layer *vpbe_display_layer = NULL;
+	struct video_device *vbd = NULL;
+
+	/* Allocate memory for four plane display objects */
+
+	disp_dev->dev[i] =
+		kzalloc(sizeof(struct vpbe_layer), GFP_KERNEL);
+
+	/* If memory allocation fails, return error */
+	if (!disp_dev->dev[i]) {
+		printk(KERN_ERR "ran out of memory\n");
+		return  -ENOMEM;
+	}
+	spin_lock_init(&disp_dev->dev[i]->irqlock);
+	mutex_init(&disp_dev->dev[i]->opslock);
+
+	/* Get the pointer to the layer object */
+	vpbe_display_layer = disp_dev->dev[i];
+	vbd = &vpbe_display_layer->video_dev;
+	/* Initialize field of video device */
+	vbd->release	= video_device_release_empty;
+	vbd->fops	= &vpbe_fops;
+	vbd->ioctl_ops	= &vpbe_ioctl_ops;
+	vbd->minor	= -1;
+	vbd->v4l2_dev   = &disp_dev->vpbe_dev->v4l2_dev;
+	vbd->lock	= &vpbe_display_layer->opslock;
+	vbd->vfl_dir	= VFL_DIR_TX;
+
+	if (disp_dev->vpbe_dev->current_timings.timings_type &
+			VPBE_ENC_STD)
+		vbd->tvnorms = (V4L2_STD_525_60 | V4L2_STD_625_50);
+
+	snprintf(vbd->name, sizeof(vbd->name),
+			"DaVinci_VPBE Display_DRIVER_V%d.%d.%d",
+			(VPBE_DISPLAY_VERSION_CODE >> 16) & 0xff,
+			(VPBE_DISPLAY_VERSION_CODE >> 8) & 0xff,
+			(VPBE_DISPLAY_VERSION_CODE) & 0xff);
+
+	vpbe_display_layer->device_id = i;
+
+	vpbe_display_layer->layer_info.id =
+		((i == VPBE_DISPLAY_DEVICE_0) ? WIN_VID0 : WIN_VID1);
+
+
+	return 0;
+}
+
+static int register_device(struct vpbe_layer *vpbe_display_layer,
+			   struct vpbe_display *disp_dev,
+			   struct platform_device *pdev)
+{
+	int err;
+
+	v4l2_info(&disp_dev->vpbe_dev->v4l2_dev,
+		  "Trying to register VPBE display device.\n");
+	v4l2_info(&disp_dev->vpbe_dev->v4l2_dev,
+		  "layer=%x,layer->video_dev=%x\n",
+		  (int)vpbe_display_layer,
+		  (int)&vpbe_display_layer->video_dev);
+
+	vpbe_display_layer->video_dev.queue = &vpbe_display_layer->buffer_queue;
+	err = video_register_device(&vpbe_display_layer->video_dev,
+				    VFL_TYPE_GRABBER,
+				    -1);
+	if (err)
+		return -ENODEV;
+
+	vpbe_display_layer->disp_dev = disp_dev;
+	/* set the driver data in platform device */
+	platform_set_drvdata(pdev, disp_dev);
+	video_set_drvdata(&vpbe_display_layer->video_dev,
+			  vpbe_display_layer);
+
+	return 0;
+}
+
+
+
+/*
+ * vpbe_display_probe()
+ * This function creates device entries by register itself to the V4L2 driver
+ * and initializes fields of each layer objects
+ */
+static int vpbe_display_probe(struct platform_device *pdev)
+{
+	struct vpbe_display *disp_dev;
+	struct v4l2_device *v4l2_dev;
+	struct resource *res = NULL;
+	struct vb2_queue *q;
+	int k;
+	int i;
+	int err;
+	int irq;
+
+	printk(KERN_DEBUG "vpbe_display_probe\n");
+	/* Allocate memory for vpbe_display */
+	disp_dev = devm_kzalloc(&pdev->dev, sizeof(struct vpbe_display),
+				GFP_KERNEL);
+	if (!disp_dev)
+		return -ENOMEM;
+
+	spin_lock_init(&disp_dev->dma_queue_lock);
+	/*
+	 * Scan all the platform devices to find the vpbe
+	 * controller device and get the vpbe_dev object
+	 */
+	err = bus_for_each_dev(&platform_bus_type, NULL, disp_dev,
+			vpbe_device_get);
+	if (err < 0)
+		return err;
+
+	v4l2_dev = &disp_dev->vpbe_dev->v4l2_dev;
+	/* Initialize the vpbe display controller */
+	if (NULL != disp_dev->vpbe_dev->ops.initialize) {
+		err = disp_dev->vpbe_dev->ops.initialize(&pdev->dev,
+							 disp_dev->vpbe_dev);
+		if (err) {
+			v4l2_err(v4l2_dev, "Error initing vpbe\n");
+			err = -ENOMEM;
+			goto probe_out;
+		}
+	}
+
+	for (i = 0; i < VPBE_DISPLAY_MAX_DEVICES; i++) {
+		if (init_vpbe_layer(i, disp_dev, pdev)) {
+			err = -ENODEV;
+			goto probe_out;
+		}
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!res) {
+		v4l2_err(v4l2_dev, "Unable to get VENC interrupt resource\n");
+		err = -ENODEV;
+		goto probe_out;
+	}
+
+	irq = res->start;
+	err = devm_request_irq(&pdev->dev, irq, venc_isr, 0,
+			       VPBE_DISPLAY_DRIVER, disp_dev);
+	if (err) {
+		v4l2_err(v4l2_dev, "VPBE IRQ request failed\n");
+		goto probe_out;
+	}
+
+	for (i = 0; i < VPBE_DISPLAY_MAX_DEVICES; i++) {
+		/* initialize vb2 queue */
+		q = &disp_dev->dev[i]->buffer_queue;
+		memset(q, 0, sizeof(*q));
+		q->type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
+		q->io_modes = VB2_MMAP | VB2_USERPTR | VB2_DMABUF;
+		q->drv_priv = disp_dev->dev[i];
+		q->ops = &video_qops;
+		q->mem_ops = &vb2_dma_contig_memops;
+		q->buf_struct_size = sizeof(struct vpbe_disp_buffer);
+		q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
+		q->min_buffers_needed = 1;
+		q->lock = &disp_dev->dev[i]->opslock;
+		err = vb2_queue_init(q);
+		if (err) {
+			v4l2_err(v4l2_dev, "vb2_queue_init() failed\n");
+			goto probe_out;
+		}
+
+		disp_dev->dev[i]->alloc_ctx =
+			vb2_dma_contig_init_ctx(disp_dev->vpbe_dev->pdev);
+		if (IS_ERR(disp_dev->dev[i]->alloc_ctx)) {
+			v4l2_err(v4l2_dev, "Failed to get the context\n");
+			err = PTR_ERR(disp_dev->dev[i]->alloc_ctx);
+			goto probe_out;
+		}
+
+		INIT_LIST_HEAD(&disp_dev->dev[i]->dma_queue);
+
+		if (register_device(disp_dev->dev[i], disp_dev, pdev)) {
+			err = -ENODEV;
+			goto probe_out;
+		}
+	}
+
+	v4l2_dbg(1, debug, v4l2_dev,
+		 "Successfully completed the probing of vpbe v4l2 device\n");
+
+	return 0;
+
+probe_out:
+	for (k = 0; k < VPBE_DISPLAY_MAX_DEVICES; k++) {
+		/* Unregister video device */
+		if (disp_dev->dev[k] != NULL) {
+			vb2_dma_contig_cleanup_ctx(disp_dev->dev[k]->alloc_ctx);
+			video_unregister_device(&disp_dev->dev[k]->video_dev);
+			kfree(disp_dev->dev[k]);
+		}
+	}
+	return err;
+}
+
+/*
+ * vpbe_display_remove()
+ * It un-register hardware layer from V4L2 driver
+ */
+static int vpbe_display_remove(struct platform_device *pdev)
+{
+	struct vpbe_layer *vpbe_display_layer;
+	struct vpbe_display *disp_dev = platform_get_drvdata(pdev);
+	struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
+	int i;
+
+	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "vpbe_display_remove\n");
+
+	/* deinitialize the vpbe display controller */
+	if (NULL != vpbe_dev->ops.deinitialize)
+		vpbe_dev->ops.deinitialize(&pdev->dev, vpbe_dev);
+	/* un-register device */
+	for (i = 0; i < VPBE_DISPLAY_MAX_DEVICES; i++) {
+		/* Get the pointer to the layer object */
+		vpbe_display_layer = disp_dev->dev[i];
+		vb2_dma_contig_cleanup_ctx(vpbe_display_layer->alloc_ctx);
+		/* Unregister video device */
+		video_unregister_device(&vpbe_display_layer->video_dev);
+
+	}
+	for (i = 0; i < VPBE_DISPLAY_MAX_DEVICES; i++) {
+		kfree(disp_dev->dev[i]);
+		disp_dev->dev[i] = NULL;
+	}
+
+	return 0;
+}
+
+static struct platform_driver vpbe_display_driver = {
+	.driver = {
+		.name = VPBE_DISPLAY_DRIVER,
+		.bus = &platform_bus_type,
+	},
+	.probe = vpbe_display_probe,
+	.remove = vpbe_display_remove,
+};
+
+module_platform_driver(vpbe_display_driver);
+
+MODULE_DESCRIPTION("TI DM644x/DM355/DM365 VPBE Display controller");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Texas Instruments");
diff --git a/drivers/media/platform/davinci/vpbe_osd.c b/drivers/media/platform/davinci/vpbe_osd.c
new file mode 100644
index 000000000..7d96a4b13
--- /dev/null
+++ b/drivers/media/platform/davinci/vpbe_osd.c
@@ -0,0 +1,1596 @@
+/*
+ * Copyright (C) 2007-2010 Texas Instruments Inc
+ * Copyright (C) 2007 MontaVista Software, Inc.
+ *
+ * Andy Lowe (alowe@mvista.com), MontaVista Software
+ * - Initial version
+ * Murali Karicheri (mkaricheri@gmail.com), Texas Instruments Ltd.
+ * - ported to sub device interface
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/slab.h>
+
+#include <mach/cputype.h>
+#include <mach/hardware.h>
+
+#include <media/davinci/vpss.h>
+#include <media/v4l2-device.h>
+#include <media/davinci/vpbe_types.h>
+#include <media/davinci/vpbe_osd.h>
+
+#include <linux/io.h>
+#include "vpbe_osd_regs.h"
+
+#define MODULE_NAME	"davinci-vpbe-osd"
+
+static struct platform_device_id vpbe_osd_devtype[] = {
+	{
+		.name = DM644X_VPBE_OSD_SUBDEV_NAME,
+		.driver_data = VPBE_VERSION_1,
+	}, {
+		.name = DM365_VPBE_OSD_SUBDEV_NAME,
+		.driver_data = VPBE_VERSION_2,
+	}, {
+		.name = DM355_VPBE_OSD_SUBDEV_NAME,
+		.driver_data = VPBE_VERSION_3,
+	},
+	{
+		/* sentinel */
+	}
+};
+
+MODULE_DEVICE_TABLE(platform, vpbe_osd_devtype);
+
+/* register access routines */
+static inline u32 osd_read(struct osd_state *sd, u32 offset)
+{
+	struct osd_state *osd = sd;
+
+	return readl(osd->osd_base + offset);
+}
+
+static inline u32 osd_write(struct osd_state *sd, u32 val, u32 offset)
+{
+	struct osd_state *osd = sd;
+
+	writel(val, osd->osd_base + offset);
+
+	return val;
+}
+
+static inline u32 osd_set(struct osd_state *sd, u32 mask, u32 offset)
+{
+	struct osd_state *osd = sd;
+
+	void __iomem *addr = osd->osd_base + offset;
+	u32 val = readl(addr) | mask;
+
+	writel(val, addr);
+
+	return val;
+}
+
+static inline u32 osd_clear(struct osd_state *sd, u32 mask, u32 offset)
+{
+	struct osd_state *osd = sd;
+
+	void __iomem *addr = osd->osd_base + offset;
+	u32 val = readl(addr) & ~mask;
+
+	writel(val, addr);
+
+	return val;
+}
+
+static inline u32 osd_modify(struct osd_state *sd, u32 mask, u32 val,
+				 u32 offset)
+{
+	struct osd_state *osd = sd;
+
+	void __iomem *addr = osd->osd_base + offset;
+	u32 new_val = (readl(addr) & ~mask) | (val & mask);
+
+	writel(new_val, addr);
+
+	return new_val;
+}
+
+/* define some macros for layer and pixfmt classification */
+#define is_osd_win(layer) (((layer) == WIN_OSD0) || ((layer) == WIN_OSD1))
+#define is_vid_win(layer) (((layer) == WIN_VID0) || ((layer) == WIN_VID1))
+#define is_rgb_pixfmt(pixfmt) \
+	(((pixfmt) == PIXFMT_RGB565) || ((pixfmt) == PIXFMT_RGB888))
+#define is_yc_pixfmt(pixfmt) \
+	(((pixfmt) == PIXFMT_YCBCRI) || ((pixfmt) == PIXFMT_YCRCBI) || \
+	((pixfmt) == PIXFMT_NV12))
+#define MAX_WIN_SIZE OSD_VIDWIN0XP_V0X
+#define MAX_LINE_LENGTH (OSD_VIDWIN0OFST_V0LO << 5)
+
+/**
+ * _osd_dm6446_vid0_pingpong() - field inversion fix for DM6446
+ * @sd - ptr to struct osd_state
+ * @field_inversion - inversion flag
+ * @fb_base_phys - frame buffer address
+ * @lconfig - ptr to layer config
+ *
+ * This routine implements a workaround for the field signal inversion silicon
+ * erratum described in Advisory 1.3.8 for the DM6446.  The fb_base_phys and
+ * lconfig parameters apply to the vid0 window.  This routine should be called
+ * whenever the vid0 layer configuration or start address is modified, or when
+ * the OSD field inversion setting is modified.
+ * Returns: 1 if the ping-pong buffers need to be toggled in the vsync isr, or
+ *          0 otherwise
+ */
+static int _osd_dm6446_vid0_pingpong(struct osd_state *sd,
+				     int field_inversion,
+				     unsigned long fb_base_phys,
+				     const struct osd_layer_config *lconfig)
+{
+	struct osd_platform_data *pdata;
+
+	pdata = (struct osd_platform_data *)sd->dev->platform_data;
+	if (pdata != NULL && pdata->field_inv_wa_enable) {
+
+		if (!field_inversion || !lconfig->interlaced) {
+			osd_write(sd, fb_base_phys & ~0x1F, OSD_VIDWIN0ADR);
+			osd_write(sd, fb_base_phys & ~0x1F, OSD_PPVWIN0ADR);
+			osd_modify(sd, OSD_MISCCTL_PPSW | OSD_MISCCTL_PPRV, 0,
+				   OSD_MISCCTL);
+			return 0;
+		} else {
+			unsigned miscctl = OSD_MISCCTL_PPRV;
+
+			osd_write(sd,
+				(fb_base_phys & ~0x1F) - lconfig->line_length,
+				OSD_VIDWIN0ADR);
+			osd_write(sd,
+				(fb_base_phys & ~0x1F) + lconfig->line_length,
+				OSD_PPVWIN0ADR);
+			osd_modify(sd,
+				OSD_MISCCTL_PPSW | OSD_MISCCTL_PPRV, miscctl,
+				OSD_MISCCTL);
+
+			return 1;
+		}
+	}
+
+	return 0;
+}
+
+static void _osd_set_field_inversion(struct osd_state *sd, int enable)
+{
+	unsigned fsinv = 0;
+
+	if (enable)
+		fsinv = OSD_MODE_FSINV;
+
+	osd_modify(sd, OSD_MODE_FSINV, fsinv, OSD_MODE);
+}
+
+static void _osd_set_blink_attribute(struct osd_state *sd, int enable,
+				     enum osd_blink_interval blink)
+{
+	u32 osdatrmd = 0;
+
+	if (enable) {
+		osdatrmd |= OSD_OSDATRMD_BLNK;
+		osdatrmd |= blink << OSD_OSDATRMD_BLNKINT_SHIFT;
+	}
+	/* caller must ensure that OSD1 is configured in attribute mode */
+	osd_modify(sd, OSD_OSDATRMD_BLNKINT | OSD_OSDATRMD_BLNK, osdatrmd,
+		  OSD_OSDATRMD);
+}
+
+static void _osd_set_rom_clut(struct osd_state *sd,
+			      enum osd_rom_clut rom_clut)
+{
+	if (rom_clut == ROM_CLUT0)
+		osd_clear(sd, OSD_MISCCTL_RSEL, OSD_MISCCTL);
+	else
+		osd_set(sd, OSD_MISCCTL_RSEL, OSD_MISCCTL);
+}
+
+static void _osd_set_palette_map(struct osd_state *sd,
+				 enum osd_win_layer osdwin,
+				 unsigned char pixel_value,
+				 unsigned char clut_index,
+				 enum osd_pix_format pixfmt)
+{
+	static const int map_2bpp[] = { 0, 5, 10, 15 };
+	static const int map_1bpp[] = { 0, 15 };
+	int bmp_offset;
+	int bmp_shift;
+	int bmp_mask;
+	int bmp_reg;
+
+	switch (pixfmt) {
+	case PIXFMT_1BPP:
+		bmp_reg = map_1bpp[pixel_value & 0x1];
+		break;
+	case PIXFMT_2BPP:
+		bmp_reg = map_2bpp[pixel_value & 0x3];
+		break;
+	case PIXFMT_4BPP:
+		bmp_reg = pixel_value & 0xf;
+		break;
+	default:
+		return;
+	}
+
+	switch (osdwin) {
+	case OSDWIN_OSD0:
+		bmp_offset = OSD_W0BMP01 + (bmp_reg >> 1) * sizeof(u32);
+		break;
+	case OSDWIN_OSD1:
+		bmp_offset = OSD_W1BMP01 + (bmp_reg >> 1) * sizeof(u32);
+		break;
+	default:
+		return;
+	}
+
+	if (bmp_reg & 1) {
+		bmp_shift = 8;
+		bmp_mask = 0xff << 8;
+	} else {
+		bmp_shift = 0;
+		bmp_mask = 0xff;
+	}
+
+	osd_modify(sd, bmp_mask, clut_index << bmp_shift, bmp_offset);
+}
+
+static void _osd_set_rec601_attenuation(struct osd_state *sd,
+					enum osd_win_layer osdwin, int enable)
+{
+	switch (osdwin) {
+	case OSDWIN_OSD0:
+		osd_modify(sd, OSD_OSDWIN0MD_ATN0E,
+			  enable ? OSD_OSDWIN0MD_ATN0E : 0,
+			  OSD_OSDWIN0MD);
+		if (sd->vpbe_type == VPBE_VERSION_1)
+			osd_modify(sd, OSD_OSDWIN0MD_ATN0E,
+				  enable ? OSD_OSDWIN0MD_ATN0E : 0,
+				  OSD_OSDWIN0MD);
+		else if ((sd->vpbe_type == VPBE_VERSION_3) ||
+			   (sd->vpbe_type == VPBE_VERSION_2))
+			osd_modify(sd, OSD_EXTMODE_ATNOSD0EN,
+				  enable ? OSD_EXTMODE_ATNOSD0EN : 0,
+				  OSD_EXTMODE);
+		break;
+	case OSDWIN_OSD1:
+		osd_modify(sd, OSD_OSDWIN1MD_ATN1E,
+			  enable ? OSD_OSDWIN1MD_ATN1E : 0,
+			  OSD_OSDWIN1MD);
+		if (sd->vpbe_type == VPBE_VERSION_1)
+			osd_modify(sd, OSD_OSDWIN1MD_ATN1E,
+				  enable ? OSD_OSDWIN1MD_ATN1E : 0,
+				  OSD_OSDWIN1MD);
+		else if ((sd->vpbe_type == VPBE_VERSION_3) ||
+			   (sd->vpbe_type == VPBE_VERSION_2))
+			osd_modify(sd, OSD_EXTMODE_ATNOSD1EN,
+				  enable ? OSD_EXTMODE_ATNOSD1EN : 0,
+				  OSD_EXTMODE);
+		break;
+	}
+}
+
+static void _osd_set_blending_factor(struct osd_state *sd,
+				     enum osd_win_layer osdwin,
+				     enum osd_blending_factor blend)
+{
+	switch (osdwin) {
+	case OSDWIN_OSD0:
+		osd_modify(sd, OSD_OSDWIN0MD_BLND0,
+			  blend << OSD_OSDWIN0MD_BLND0_SHIFT, OSD_OSDWIN0MD);
+		break;
+	case OSDWIN_OSD1:
+		osd_modify(sd, OSD_OSDWIN1MD_BLND1,
+			  blend << OSD_OSDWIN1MD_BLND1_SHIFT, OSD_OSDWIN1MD);
+		break;
+	}
+}
+
+static void _osd_enable_rgb888_pixblend(struct osd_state *sd,
+					enum osd_win_layer osdwin)
+{
+
+	osd_modify(sd, OSD_MISCCTL_BLDSEL, 0, OSD_MISCCTL);
+	switch (osdwin) {
+	case OSDWIN_OSD0:
+		osd_modify(sd, OSD_EXTMODE_OSD0BLDCHR,
+			  OSD_EXTMODE_OSD0BLDCHR, OSD_EXTMODE);
+		break;
+	case OSDWIN_OSD1:
+		osd_modify(sd, OSD_EXTMODE_OSD1BLDCHR,
+			  OSD_EXTMODE_OSD1BLDCHR, OSD_EXTMODE);
+		break;
+	}
+}
+
+static void _osd_enable_color_key(struct osd_state *sd,
+				  enum osd_win_layer osdwin,
+				  unsigned colorkey,
+				  enum osd_pix_format pixfmt)
+{
+	switch (pixfmt) {
+	case PIXFMT_1BPP:
+	case PIXFMT_2BPP:
+	case PIXFMT_4BPP:
+	case PIXFMT_8BPP:
+		if (sd->vpbe_type == VPBE_VERSION_3) {
+			switch (osdwin) {
+			case OSDWIN_OSD0:
+				osd_modify(sd, OSD_TRANSPBMPIDX_BMP0,
+					  colorkey <<
+					  OSD_TRANSPBMPIDX_BMP0_SHIFT,
+					  OSD_TRANSPBMPIDX);
+				break;
+			case OSDWIN_OSD1:
+				osd_modify(sd, OSD_TRANSPBMPIDX_BMP1,
+					  colorkey <<
+					  OSD_TRANSPBMPIDX_BMP1_SHIFT,
+					  OSD_TRANSPBMPIDX);
+				break;
+			}
+		}
+		break;
+	case PIXFMT_RGB565:
+		if (sd->vpbe_type == VPBE_VERSION_1)
+			osd_write(sd, colorkey & OSD_TRANSPVAL_RGBTRANS,
+				  OSD_TRANSPVAL);
+		else if (sd->vpbe_type == VPBE_VERSION_3)
+			osd_write(sd, colorkey & OSD_TRANSPVALL_RGBL,
+				  OSD_TRANSPVALL);
+		break;
+	case PIXFMT_YCBCRI:
+	case PIXFMT_YCRCBI:
+		if (sd->vpbe_type == VPBE_VERSION_3)
+			osd_modify(sd, OSD_TRANSPVALU_Y, colorkey,
+				   OSD_TRANSPVALU);
+		break;
+	case PIXFMT_RGB888:
+		if (sd->vpbe_type == VPBE_VERSION_3) {
+			osd_write(sd, colorkey & OSD_TRANSPVALL_RGBL,
+				  OSD_TRANSPVALL);
+			osd_modify(sd, OSD_TRANSPVALU_RGBU, colorkey >> 16,
+				  OSD_TRANSPVALU);
+		}
+		break;
+	default:
+		break;
+	}
+
+	switch (osdwin) {
+	case OSDWIN_OSD0:
+		osd_set(sd, OSD_OSDWIN0MD_TE0, OSD_OSDWIN0MD);
+		break;
+	case OSDWIN_OSD1:
+		osd_set(sd, OSD_OSDWIN1MD_TE1, OSD_OSDWIN1MD);
+		break;
+	}
+}
+
+static void _osd_disable_color_key(struct osd_state *sd,
+				   enum osd_win_layer osdwin)
+{
+	switch (osdwin) {
+	case OSDWIN_OSD0:
+		osd_clear(sd, OSD_OSDWIN0MD_TE0, OSD_OSDWIN0MD);
+		break;
+	case OSDWIN_OSD1:
+		osd_clear(sd, OSD_OSDWIN1MD_TE1, OSD_OSDWIN1MD);
+		break;
+	}
+}
+
+static void _osd_set_osd_clut(struct osd_state *sd,
+			      enum osd_win_layer osdwin,
+			      enum osd_clut clut)
+{
+	u32 winmd = 0;
+
+	switch (osdwin) {
+	case OSDWIN_OSD0:
+		if (clut == RAM_CLUT)
+			winmd |= OSD_OSDWIN0MD_CLUTS0;
+		osd_modify(sd, OSD_OSDWIN0MD_CLUTS0, winmd, OSD_OSDWIN0MD);
+		break;
+	case OSDWIN_OSD1:
+		if (clut == RAM_CLUT)
+			winmd |= OSD_OSDWIN1MD_CLUTS1;
+		osd_modify(sd, OSD_OSDWIN1MD_CLUTS1, winmd, OSD_OSDWIN1MD);
+		break;
+	}
+}
+
+static void _osd_set_zoom(struct osd_state *sd, enum osd_layer layer,
+			  enum osd_zoom_factor h_zoom,
+			  enum osd_zoom_factor v_zoom)
+{
+	u32 winmd = 0;
+
+	switch (layer) {
+	case WIN_OSD0:
+		winmd |= (h_zoom << OSD_OSDWIN0MD_OHZ0_SHIFT);
+		winmd |= (v_zoom << OSD_OSDWIN0MD_OVZ0_SHIFT);
+		osd_modify(sd, OSD_OSDWIN0MD_OHZ0 | OSD_OSDWIN0MD_OVZ0, winmd,
+			  OSD_OSDWIN0MD);
+		break;
+	case WIN_VID0:
+		winmd |= (h_zoom << OSD_VIDWINMD_VHZ0_SHIFT);
+		winmd |= (v_zoom << OSD_VIDWINMD_VVZ0_SHIFT);
+		osd_modify(sd, OSD_VIDWINMD_VHZ0 | OSD_VIDWINMD_VVZ0, winmd,
+			  OSD_VIDWINMD);
+		break;
+	case WIN_OSD1:
+		winmd |= (h_zoom << OSD_OSDWIN1MD_OHZ1_SHIFT);
+		winmd |= (v_zoom << OSD_OSDWIN1MD_OVZ1_SHIFT);
+		osd_modify(sd, OSD_OSDWIN1MD_OHZ1 | OSD_OSDWIN1MD_OVZ1, winmd,
+			  OSD_OSDWIN1MD);
+		break;
+	case WIN_VID1:
+		winmd |= (h_zoom << OSD_VIDWINMD_VHZ1_SHIFT);
+		winmd |= (v_zoom << OSD_VIDWINMD_VVZ1_SHIFT);
+		osd_modify(sd, OSD_VIDWINMD_VHZ1 | OSD_VIDWINMD_VVZ1, winmd,
+			  OSD_VIDWINMD);
+		break;
+	}
+}
+
+static void _osd_disable_layer(struct osd_state *sd, enum osd_layer layer)
+{
+	switch (layer) {
+	case WIN_OSD0:
+		osd_clear(sd, OSD_OSDWIN0MD_OACT0, OSD_OSDWIN0MD);
+		break;
+	case WIN_VID0:
+		osd_clear(sd, OSD_VIDWINMD_ACT0, OSD_VIDWINMD);
+		break;
+	case WIN_OSD1:
+		/* disable attribute mode as well as disabling the window */
+		osd_clear(sd, OSD_OSDWIN1MD_OASW | OSD_OSDWIN1MD_OACT1,
+			  OSD_OSDWIN1MD);
+		break;
+	case WIN_VID1:
+		osd_clear(sd, OSD_VIDWINMD_ACT1, OSD_VIDWINMD);
+		break;
+	}
+}
+
+static void osd_disable_layer(struct osd_state *sd, enum osd_layer layer)
+{
+	struct osd_state *osd = sd;
+	struct osd_window_state *win = &osd->win[layer];
+	unsigned long flags;
+
+	spin_lock_irqsave(&osd->lock, flags);
+
+	if (!win->is_enabled) {
+		spin_unlock_irqrestore(&osd->lock, flags);
+		return;
+	}
+	win->is_enabled = 0;
+
+	_osd_disable_layer(sd, layer);
+
+	spin_unlock_irqrestore(&osd->lock, flags);
+}
+
+static void _osd_enable_attribute_mode(struct osd_state *sd)
+{
+	/* enable attribute mode for OSD1 */
+	osd_set(sd, OSD_OSDWIN1MD_OASW, OSD_OSDWIN1MD);
+}
+
+static void _osd_enable_layer(struct osd_state *sd, enum osd_layer layer)
+{
+	switch (layer) {
+	case WIN_OSD0:
+		osd_set(sd, OSD_OSDWIN0MD_OACT0, OSD_OSDWIN0MD);
+		break;
+	case WIN_VID0:
+		osd_set(sd, OSD_VIDWINMD_ACT0, OSD_VIDWINMD);
+		break;
+	case WIN_OSD1:
+		/* enable OSD1 and disable attribute mode */
+		osd_modify(sd, OSD_OSDWIN1MD_OASW | OSD_OSDWIN1MD_OACT1,
+			  OSD_OSDWIN1MD_OACT1, OSD_OSDWIN1MD);
+		break;
+	case WIN_VID1:
+		osd_set(sd, OSD_VIDWINMD_ACT1, OSD_VIDWINMD);
+		break;
+	}
+}
+
+static int osd_enable_layer(struct osd_state *sd, enum osd_layer layer,
+			    int otherwin)
+{
+	struct osd_state *osd = sd;
+	struct osd_window_state *win = &osd->win[layer];
+	struct osd_layer_config *cfg = &win->lconfig;
+	unsigned long flags;
+
+	spin_lock_irqsave(&osd->lock, flags);
+
+	/*
+	 * use otherwin flag to know this is the other vid window
+	 * in YUV420 mode, if is, skip this check
+	 */
+	if (!otherwin && (!win->is_allocated ||
+			!win->fb_base_phys ||
+			!cfg->line_length ||
+			!cfg->xsize ||
+			!cfg->ysize)) {
+		spin_unlock_irqrestore(&osd->lock, flags);
+		return -1;
+	}
+
+	if (win->is_enabled) {
+		spin_unlock_irqrestore(&osd->lock, flags);
+		return 0;
+	}
+	win->is_enabled = 1;
+
+	if (cfg->pixfmt != PIXFMT_OSD_ATTR)
+		_osd_enable_layer(sd, layer);
+	else {
+		_osd_enable_attribute_mode(sd);
+		_osd_set_blink_attribute(sd, osd->is_blinking, osd->blink);
+	}
+
+	spin_unlock_irqrestore(&osd->lock, flags);
+
+	return 0;
+}
+
+#define OSD_SRC_ADDR_HIGH4	0x7800000
+#define OSD_SRC_ADDR_HIGH7	0x7F0000
+#define OSD_SRCADD_OFSET_SFT	23
+#define OSD_SRCADD_ADD_SFT	16
+#define OSD_WINADL_MASK		0xFFFF
+#define OSD_WINOFST_MASK	0x1000
+#define VPBE_REG_BASE		0x80000000
+
+static void _osd_start_layer(struct osd_state *sd, enum osd_layer layer,
+			     unsigned long fb_base_phys,
+			     unsigned long cbcr_ofst)
+{
+
+	if (sd->vpbe_type == VPBE_VERSION_1) {
+		switch (layer) {
+		case WIN_OSD0:
+			osd_write(sd, fb_base_phys & ~0x1F, OSD_OSDWIN0ADR);
+			break;
+		case WIN_VID0:
+			osd_write(sd, fb_base_phys & ~0x1F, OSD_VIDWIN0ADR);
+			break;
+		case WIN_OSD1:
+			osd_write(sd, fb_base_phys & ~0x1F, OSD_OSDWIN1ADR);
+			break;
+		case WIN_VID1:
+			osd_write(sd, fb_base_phys & ~0x1F, OSD_VIDWIN1ADR);
+			break;
+	      }
+	} else if (sd->vpbe_type == VPBE_VERSION_3) {
+		unsigned long fb_offset_32 =
+		    (fb_base_phys - VPBE_REG_BASE) >> 5;
+
+		switch (layer) {
+		case WIN_OSD0:
+			osd_modify(sd, OSD_OSDWINADH_O0AH,
+				  fb_offset_32 >> (OSD_SRCADD_ADD_SFT -
+						   OSD_OSDWINADH_O0AH_SHIFT),
+				  OSD_OSDWINADH);
+			osd_write(sd, fb_offset_32 & OSD_OSDWIN0ADL_O0AL,
+				  OSD_OSDWIN0ADL);
+			break;
+		case WIN_VID0:
+			osd_modify(sd, OSD_VIDWINADH_V0AH,
+				  fb_offset_32 >> (OSD_SRCADD_ADD_SFT -
+						   OSD_VIDWINADH_V0AH_SHIFT),
+				  OSD_VIDWINADH);
+			osd_write(sd, fb_offset_32 & OSD_VIDWIN0ADL_V0AL,
+				  OSD_VIDWIN0ADL);
+			break;
+		case WIN_OSD1:
+			osd_modify(sd, OSD_OSDWINADH_O1AH,
+				  fb_offset_32 >> (OSD_SRCADD_ADD_SFT -
+						   OSD_OSDWINADH_O1AH_SHIFT),
+				  OSD_OSDWINADH);
+			osd_write(sd, fb_offset_32 & OSD_OSDWIN1ADL_O1AL,
+				  OSD_OSDWIN1ADL);
+			break;
+		case WIN_VID1:
+			osd_modify(sd, OSD_VIDWINADH_V1AH,
+				  fb_offset_32 >> (OSD_SRCADD_ADD_SFT -
+						   OSD_VIDWINADH_V1AH_SHIFT),
+				  OSD_VIDWINADH);
+			osd_write(sd, fb_offset_32 & OSD_VIDWIN1ADL_V1AL,
+				  OSD_VIDWIN1ADL);
+			break;
+		}
+	} else if (sd->vpbe_type == VPBE_VERSION_2) {
+		struct osd_window_state *win = &sd->win[layer];
+		unsigned long fb_offset_32, cbcr_offset_32;
+
+		fb_offset_32 = fb_base_phys - VPBE_REG_BASE;
+		if (cbcr_ofst)
+			cbcr_offset_32 = cbcr_ofst;
+		else
+			cbcr_offset_32 = win->lconfig.line_length *
+					 win->lconfig.ysize;
+		cbcr_offset_32 += fb_offset_32;
+		fb_offset_32 = fb_offset_32 >> 5;
+		cbcr_offset_32 = cbcr_offset_32 >> 5;
+		/*
+		 * DM365: start address is 27-bit long address b26 - b23 are
+		 * in offset register b12 - b9, and * bit 26 has to be '1'
+		 */
+		if (win->lconfig.pixfmt == PIXFMT_NV12) {
+			switch (layer) {
+			case WIN_VID0:
+			case WIN_VID1:
+				/* Y is in VID0 */
+				osd_modify(sd, OSD_VIDWIN0OFST_V0AH,
+					 ((fb_offset_32 & OSD_SRC_ADDR_HIGH4) >>
+					 (OSD_SRCADD_OFSET_SFT -
+					 OSD_WINOFST_AH_SHIFT)) |
+					 OSD_WINOFST_MASK, OSD_VIDWIN0OFST);
+				osd_modify(sd, OSD_VIDWINADH_V0AH,
+					  (fb_offset_32 & OSD_SRC_ADDR_HIGH7) >>
+					  (OSD_SRCADD_ADD_SFT -
+					  OSD_VIDWINADH_V0AH_SHIFT),
+					   OSD_VIDWINADH);
+				osd_write(sd, fb_offset_32 & OSD_WINADL_MASK,
+					  OSD_VIDWIN0ADL);
+				/* CbCr is in VID1 */
+				osd_modify(sd, OSD_VIDWIN1OFST_V1AH,
+					 ((cbcr_offset_32 &
+					 OSD_SRC_ADDR_HIGH4) >>
+					 (OSD_SRCADD_OFSET_SFT -
+					 OSD_WINOFST_AH_SHIFT)) |
+					 OSD_WINOFST_MASK, OSD_VIDWIN1OFST);
+				osd_modify(sd, OSD_VIDWINADH_V1AH,
+					  (cbcr_offset_32 &
+					  OSD_SRC_ADDR_HIGH7) >>
+					  (OSD_SRCADD_ADD_SFT -
+					  OSD_VIDWINADH_V1AH_SHIFT),
+					  OSD_VIDWINADH);
+				osd_write(sd, cbcr_offset_32 & OSD_WINADL_MASK,
+					  OSD_VIDWIN1ADL);
+				break;
+			default:
+				break;
+			}
+		}
+
+		switch (layer) {
+		case WIN_OSD0:
+			osd_modify(sd, OSD_OSDWIN0OFST_O0AH,
+				 ((fb_offset_32 & OSD_SRC_ADDR_HIGH4) >>
+				 (OSD_SRCADD_OFSET_SFT -
+				 OSD_WINOFST_AH_SHIFT)) | OSD_WINOFST_MASK,
+				  OSD_OSDWIN0OFST);
+			osd_modify(sd, OSD_OSDWINADH_O0AH,
+				 (fb_offset_32 & OSD_SRC_ADDR_HIGH7) >>
+				 (OSD_SRCADD_ADD_SFT -
+				 OSD_OSDWINADH_O0AH_SHIFT), OSD_OSDWINADH);
+			osd_write(sd, fb_offset_32 & OSD_WINADL_MASK,
+					OSD_OSDWIN0ADL);
+			break;
+		case WIN_VID0:
+			if (win->lconfig.pixfmt != PIXFMT_NV12) {
+				osd_modify(sd, OSD_VIDWIN0OFST_V0AH,
+					 ((fb_offset_32 & OSD_SRC_ADDR_HIGH4) >>
+					 (OSD_SRCADD_OFSET_SFT -
+					 OSD_WINOFST_AH_SHIFT)) |
+					 OSD_WINOFST_MASK, OSD_VIDWIN0OFST);
+				osd_modify(sd, OSD_VIDWINADH_V0AH,
+					  (fb_offset_32 & OSD_SRC_ADDR_HIGH7) >>
+					  (OSD_SRCADD_ADD_SFT -
+					  OSD_VIDWINADH_V0AH_SHIFT),
+					  OSD_VIDWINADH);
+				osd_write(sd, fb_offset_32 & OSD_WINADL_MASK,
+					  OSD_VIDWIN0ADL);
+			}
+			break;
+		case WIN_OSD1:
+			osd_modify(sd, OSD_OSDWIN1OFST_O1AH,
+				 ((fb_offset_32 & OSD_SRC_ADDR_HIGH4) >>
+				 (OSD_SRCADD_OFSET_SFT -
+				 OSD_WINOFST_AH_SHIFT)) | OSD_WINOFST_MASK,
+				  OSD_OSDWIN1OFST);
+			osd_modify(sd, OSD_OSDWINADH_O1AH,
+				  (fb_offset_32 & OSD_SRC_ADDR_HIGH7) >>
+				  (OSD_SRCADD_ADD_SFT -
+				  OSD_OSDWINADH_O1AH_SHIFT),
+				  OSD_OSDWINADH);
+			osd_write(sd, fb_offset_32 & OSD_WINADL_MASK,
+					OSD_OSDWIN1ADL);
+			break;
+		case WIN_VID1:
+			if (win->lconfig.pixfmt != PIXFMT_NV12) {
+				osd_modify(sd, OSD_VIDWIN1OFST_V1AH,
+					 ((fb_offset_32 & OSD_SRC_ADDR_HIGH4) >>
+					 (OSD_SRCADD_OFSET_SFT -
+					 OSD_WINOFST_AH_SHIFT)) |
+					 OSD_WINOFST_MASK, OSD_VIDWIN1OFST);
+				osd_modify(sd, OSD_VIDWINADH_V1AH,
+					  (fb_offset_32 & OSD_SRC_ADDR_HIGH7) >>
+					  (OSD_SRCADD_ADD_SFT -
+					  OSD_VIDWINADH_V1AH_SHIFT),
+					  OSD_VIDWINADH);
+				osd_write(sd, fb_offset_32 & OSD_WINADL_MASK,
+					  OSD_VIDWIN1ADL);
+			}
+			break;
+		}
+	}
+}
+
+static void osd_start_layer(struct osd_state *sd, enum osd_layer layer,
+			    unsigned long fb_base_phys,
+			    unsigned long cbcr_ofst)
+{
+	struct osd_state *osd = sd;
+	struct osd_window_state *win = &osd->win[layer];
+	struct osd_layer_config *cfg = &win->lconfig;
+	unsigned long flags;
+
+	spin_lock_irqsave(&osd->lock, flags);
+
+	win->fb_base_phys = fb_base_phys & ~0x1F;
+	_osd_start_layer(sd, layer, fb_base_phys, cbcr_ofst);
+
+	if (layer == WIN_VID0) {
+		osd->pingpong =
+		    _osd_dm6446_vid0_pingpong(sd, osd->field_inversion,
+						       win->fb_base_phys,
+						       cfg);
+	}
+
+	spin_unlock_irqrestore(&osd->lock, flags);
+}
+
+static void osd_get_layer_config(struct osd_state *sd, enum osd_layer layer,
+				 struct osd_layer_config *lconfig)
+{
+	struct osd_state *osd = sd;
+	struct osd_window_state *win = &osd->win[layer];
+	unsigned long flags;
+
+	spin_lock_irqsave(&osd->lock, flags);
+
+	*lconfig = win->lconfig;
+
+	spin_unlock_irqrestore(&osd->lock, flags);
+}
+
+/**
+ * try_layer_config() - Try a specific configuration for the layer
+ * @sd  - ptr to struct osd_state
+ * @layer - layer to configure
+ * @lconfig - layer configuration to try
+ *
+ * If the requested lconfig is completely rejected and the value of lconfig on
+ * exit is the current lconfig, then try_layer_config() returns 1.  Otherwise,
+ * try_layer_config() returns 0.  A return value of 0 does not necessarily mean
+ * that the value of lconfig on exit is identical to the value of lconfig on
+ * entry, but merely that it represents a change from the current lconfig.
+ */
+static int try_layer_config(struct osd_state *sd, enum osd_layer layer,
+			    struct osd_layer_config *lconfig)
+{
+	struct osd_state *osd = sd;
+	struct osd_window_state *win = &osd->win[layer];
+	int bad_config = 0;
+
+	/* verify that the pixel format is compatible with the layer */
+	switch (lconfig->pixfmt) {
+	case PIXFMT_1BPP:
+	case PIXFMT_2BPP:
+	case PIXFMT_4BPP:
+	case PIXFMT_8BPP:
+	case PIXFMT_RGB565:
+		if (osd->vpbe_type == VPBE_VERSION_1)
+			bad_config = !is_vid_win(layer);
+		break;
+	case PIXFMT_YCBCRI:
+	case PIXFMT_YCRCBI:
+		bad_config = !is_vid_win(layer);
+		break;
+	case PIXFMT_RGB888:
+		if (osd->vpbe_type == VPBE_VERSION_1)
+			bad_config = !is_vid_win(layer);
+		else if ((osd->vpbe_type == VPBE_VERSION_3) ||
+			 (osd->vpbe_type == VPBE_VERSION_2))
+			bad_config = !is_osd_win(layer);
+		break;
+	case PIXFMT_NV12:
+		if (osd->vpbe_type != VPBE_VERSION_2)
+			bad_config = 1;
+		else
+			bad_config = is_osd_win(layer);
+		break;
+	case PIXFMT_OSD_ATTR:
+		bad_config = (layer != WIN_OSD1);
+		break;
+	default:
+		bad_config = 1;
+		break;
+	}
+	if (bad_config) {
+		/*
+		 * The requested pixel format is incompatible with the layer,
+		 * so keep the current layer configuration.
+		 */
+		*lconfig = win->lconfig;
+		return bad_config;
+	}
+
+	/* DM6446: */
+	/* only one OSD window at a time can use RGB pixel formats */
+	  if ((osd->vpbe_type == VPBE_VERSION_1) &&
+		  is_osd_win(layer) && is_rgb_pixfmt(lconfig->pixfmt)) {
+		enum osd_pix_format pixfmt;
+		if (layer == WIN_OSD0)
+			pixfmt = osd->win[WIN_OSD1].lconfig.pixfmt;
+		else
+			pixfmt = osd->win[WIN_OSD0].lconfig.pixfmt;
+
+		if (is_rgb_pixfmt(pixfmt)) {
+			/*
+			 * The other OSD window is already configured for an
+			 * RGB, so keep the current layer configuration.
+			 */
+			*lconfig = win->lconfig;
+			return 1;
+		}
+	}
+
+	/* DM6446: only one video window at a time can use RGB888 */
+	if ((osd->vpbe_type == VPBE_VERSION_1) && is_vid_win(layer) &&
+		lconfig->pixfmt == PIXFMT_RGB888) {
+		enum osd_pix_format pixfmt;
+
+		if (layer == WIN_VID0)
+			pixfmt = osd->win[WIN_VID1].lconfig.pixfmt;
+		else
+			pixfmt = osd->win[WIN_VID0].lconfig.pixfmt;
+
+		if (pixfmt == PIXFMT_RGB888) {
+			/*
+			 * The other video window is already configured for
+			 * RGB888, so keep the current layer configuration.
+			 */
+			*lconfig = win->lconfig;
+			return 1;
+		}
+	}
+
+	/* window dimensions must be non-zero */
+	if (!lconfig->line_length || !lconfig->xsize || !lconfig->ysize) {
+		*lconfig = win->lconfig;
+		return 1;
+	}
+
+	/* round line_length up to a multiple of 32 */
+	lconfig->line_length = ((lconfig->line_length + 31) / 32) * 32;
+	lconfig->line_length =
+	    min(lconfig->line_length, (unsigned)MAX_LINE_LENGTH);
+	lconfig->xsize = min(lconfig->xsize, (unsigned)MAX_WIN_SIZE);
+	lconfig->ysize = min(lconfig->ysize, (unsigned)MAX_WIN_SIZE);
+	lconfig->xpos = min(lconfig->xpos, (unsigned)MAX_WIN_SIZE);
+	lconfig->ypos = min(lconfig->ypos, (unsigned)MAX_WIN_SIZE);
+	lconfig->interlaced = (lconfig->interlaced != 0);
+	if (lconfig->interlaced) {
+		/* ysize and ypos must be even for interlaced displays */
+		lconfig->ysize &= ~1;
+		lconfig->ypos &= ~1;
+	}
+
+	return 0;
+}
+
+static void _osd_disable_vid_rgb888(struct osd_state *sd)
+{
+	/*
+	 * The DM6446 supports RGB888 pixel format in a single video window.
+	 * This routine disables RGB888 pixel format for both video windows.
+	 * The caller must ensure that neither video window is currently
+	 * configured for RGB888 pixel format.
+	 */
+	if (sd->vpbe_type == VPBE_VERSION_1)
+		osd_clear(sd, OSD_MISCCTL_RGBEN, OSD_MISCCTL);
+}
+
+static void _osd_enable_vid_rgb888(struct osd_state *sd,
+				   enum osd_layer layer)
+{
+	/*
+	 * The DM6446 supports RGB888 pixel format in a single video window.
+	 * This routine enables RGB888 pixel format for the specified video
+	 * window.  The caller must ensure that the other video window is not
+	 * currently configured for RGB888 pixel format, as this routine will
+	 * disable RGB888 pixel format for the other window.
+	 */
+	if (sd->vpbe_type == VPBE_VERSION_1) {
+		if (layer == WIN_VID0)
+			osd_modify(sd, OSD_MISCCTL_RGBEN | OSD_MISCCTL_RGBWIN,
+				  OSD_MISCCTL_RGBEN, OSD_MISCCTL);
+		else if (layer == WIN_VID1)
+			osd_modify(sd, OSD_MISCCTL_RGBEN | OSD_MISCCTL_RGBWIN,
+				  OSD_MISCCTL_RGBEN | OSD_MISCCTL_RGBWIN,
+				  OSD_MISCCTL);
+	}
+}
+
+static void _osd_set_cbcr_order(struct osd_state *sd,
+				enum osd_pix_format pixfmt)
+{
+	/*
+	 * The caller must ensure that all windows using YC pixfmt use the same
+	 * Cb/Cr order.
+	 */
+	if (pixfmt == PIXFMT_YCBCRI)
+		osd_clear(sd, OSD_MODE_CS, OSD_MODE);
+	else if (pixfmt == PIXFMT_YCRCBI)
+		osd_set(sd, OSD_MODE_CS, OSD_MODE);
+}
+
+static void _osd_set_layer_config(struct osd_state *sd, enum osd_layer layer,
+				  const struct osd_layer_config *lconfig)
+{
+	u32 winmd = 0, winmd_mask = 0, bmw = 0;
+
+	_osd_set_cbcr_order(sd, lconfig->pixfmt);
+
+	switch (layer) {
+	case WIN_OSD0:
+		if (sd->vpbe_type == VPBE_VERSION_1) {
+			winmd_mask |= OSD_OSDWIN0MD_RGB0E;
+			if (lconfig->pixfmt == PIXFMT_RGB565)
+				winmd |= OSD_OSDWIN0MD_RGB0E;
+		} else if ((sd->vpbe_type == VPBE_VERSION_3) ||
+		  (sd->vpbe_type == VPBE_VERSION_2)) {
+			winmd_mask |= OSD_OSDWIN0MD_BMP0MD;
+			switch (lconfig->pixfmt) {
+			case PIXFMT_RGB565:
+					winmd |= (1 <<
+					OSD_OSDWIN0MD_BMP0MD_SHIFT);
+					break;
+			case PIXFMT_RGB888:
+				winmd |= (2 << OSD_OSDWIN0MD_BMP0MD_SHIFT);
+				_osd_enable_rgb888_pixblend(sd, OSDWIN_OSD0);
+				break;
+			case PIXFMT_YCBCRI:
+			case PIXFMT_YCRCBI:
+				winmd |= (3 << OSD_OSDWIN0MD_BMP0MD_SHIFT);
+				break;
+			default:
+				break;
+			}
+		}
+
+		winmd_mask |= OSD_OSDWIN0MD_BMW0 | OSD_OSDWIN0MD_OFF0;
+
+		switch (lconfig->pixfmt) {
+		case PIXFMT_1BPP:
+			bmw = 0;
+			break;
+		case PIXFMT_2BPP:
+			bmw = 1;
+			break;
+		case PIXFMT_4BPP:
+			bmw = 2;
+			break;
+		case PIXFMT_8BPP:
+			bmw = 3;
+			break;
+		default:
+			break;
+		}
+		winmd |= (bmw << OSD_OSDWIN0MD_BMW0_SHIFT);
+
+		if (lconfig->interlaced)
+			winmd |= OSD_OSDWIN0MD_OFF0;
+
+		osd_modify(sd, winmd_mask, winmd, OSD_OSDWIN0MD);
+		osd_write(sd, lconfig->line_length >> 5, OSD_OSDWIN0OFST);
+		osd_write(sd, lconfig->xpos, OSD_OSDWIN0XP);
+		osd_write(sd, lconfig->xsize, OSD_OSDWIN0XL);
+		if (lconfig->interlaced) {
+			osd_write(sd, lconfig->ypos >> 1, OSD_OSDWIN0YP);
+			osd_write(sd, lconfig->ysize >> 1, OSD_OSDWIN0YL);
+		} else {
+			osd_write(sd, lconfig->ypos, OSD_OSDWIN0YP);
+			osd_write(sd, lconfig->ysize, OSD_OSDWIN0YL);
+		}
+		break;
+	case WIN_VID0:
+		winmd_mask |= OSD_VIDWINMD_VFF0;
+		if (lconfig->interlaced)
+			winmd |= OSD_VIDWINMD_VFF0;
+
+		osd_modify(sd, winmd_mask, winmd, OSD_VIDWINMD);
+		osd_write(sd, lconfig->line_length >> 5, OSD_VIDWIN0OFST);
+		osd_write(sd, lconfig->xpos, OSD_VIDWIN0XP);
+		osd_write(sd, lconfig->xsize, OSD_VIDWIN0XL);
+		/*
+		 * For YUV420P format the register contents are
+		 * duplicated in both VID registers
+		 */
+		if ((sd->vpbe_type == VPBE_VERSION_2) &&
+				(lconfig->pixfmt == PIXFMT_NV12)) {
+			/* other window also */
+			if (lconfig->interlaced) {
+				winmd_mask |= OSD_VIDWINMD_VFF1;
+				winmd |= OSD_VIDWINMD_VFF1;
+				osd_modify(sd, winmd_mask, winmd,
+					  OSD_VIDWINMD);
+			}
+
+			osd_modify(sd, OSD_MISCCTL_S420D,
+				    OSD_MISCCTL_S420D, OSD_MISCCTL);
+			osd_write(sd, lconfig->line_length >> 5,
+				  OSD_VIDWIN1OFST);
+			osd_write(sd, lconfig->xpos, OSD_VIDWIN1XP);
+			osd_write(sd, lconfig->xsize, OSD_VIDWIN1XL);
+			/*
+			  * if NV21 pixfmt and line length not 32B
+			  * aligned (e.g. NTSC), Need to set window
+			  * X pixel size to be 32B aligned as well
+			  */
+			if (lconfig->xsize % 32) {
+				osd_write(sd,
+					  ((lconfig->xsize + 31) & ~31),
+					  OSD_VIDWIN1XL);
+				osd_write(sd,
+					  ((lconfig->xsize + 31) & ~31),
+					  OSD_VIDWIN0XL);
+			}
+		} else if ((sd->vpbe_type == VPBE_VERSION_2) &&
+				(lconfig->pixfmt != PIXFMT_NV12)) {
+			osd_modify(sd, OSD_MISCCTL_S420D, ~OSD_MISCCTL_S420D,
+						OSD_MISCCTL);
+		}
+
+		if (lconfig->interlaced) {
+			osd_write(sd, lconfig->ypos >> 1, OSD_VIDWIN0YP);
+			osd_write(sd, lconfig->ysize >> 1, OSD_VIDWIN0YL);
+			if ((sd->vpbe_type == VPBE_VERSION_2) &&
+				lconfig->pixfmt == PIXFMT_NV12) {
+				osd_write(sd, lconfig->ypos >> 1,
+					  OSD_VIDWIN1YP);
+				osd_write(sd, lconfig->ysize >> 1,
+					  OSD_VIDWIN1YL);
+			}
+		} else {
+			osd_write(sd, lconfig->ypos, OSD_VIDWIN0YP);
+			osd_write(sd, lconfig->ysize, OSD_VIDWIN0YL);
+			if ((sd->vpbe_type == VPBE_VERSION_2) &&
+				lconfig->pixfmt == PIXFMT_NV12) {
+				osd_write(sd, lconfig->ypos, OSD_VIDWIN1YP);
+				osd_write(sd, lconfig->ysize, OSD_VIDWIN1YL);
+			}
+		}
+		break;
+	case WIN_OSD1:
+		/*
+		 * The caller must ensure that OSD1 is disabled prior to
+		 * switching from a normal mode to attribute mode or from
+		 * attribute mode to a normal mode.
+		 */
+		if (lconfig->pixfmt == PIXFMT_OSD_ATTR) {
+			if (sd->vpbe_type == VPBE_VERSION_1) {
+				winmd_mask |= OSD_OSDWIN1MD_ATN1E |
+				OSD_OSDWIN1MD_RGB1E | OSD_OSDWIN1MD_CLUTS1 |
+				OSD_OSDWIN1MD_BLND1 | OSD_OSDWIN1MD_TE1;
+			} else {
+				winmd_mask |= OSD_OSDWIN1MD_BMP1MD |
+				OSD_OSDWIN1MD_CLUTS1 | OSD_OSDWIN1MD_BLND1 |
+				OSD_OSDWIN1MD_TE1;
+			}
+		} else {
+			if (sd->vpbe_type == VPBE_VERSION_1) {
+				winmd_mask |= OSD_OSDWIN1MD_RGB1E;
+				if (lconfig->pixfmt == PIXFMT_RGB565)
+					winmd |= OSD_OSDWIN1MD_RGB1E;
+			} else if ((sd->vpbe_type == VPBE_VERSION_3)
+				   || (sd->vpbe_type == VPBE_VERSION_2)) {
+				winmd_mask |= OSD_OSDWIN1MD_BMP1MD;
+				switch (lconfig->pixfmt) {
+				case PIXFMT_RGB565:
+					winmd |=
+					    (1 << OSD_OSDWIN1MD_BMP1MD_SHIFT);
+					break;
+				case PIXFMT_RGB888:
+					winmd |=
+					    (2 << OSD_OSDWIN1MD_BMP1MD_SHIFT);
+					_osd_enable_rgb888_pixblend(sd,
+							OSDWIN_OSD1);
+					break;
+				case PIXFMT_YCBCRI:
+				case PIXFMT_YCRCBI:
+					winmd |=
+					    (3 << OSD_OSDWIN1MD_BMP1MD_SHIFT);
+					break;
+				default:
+					break;
+				}
+			}
+
+			winmd_mask |= OSD_OSDWIN1MD_BMW1;
+			switch (lconfig->pixfmt) {
+			case PIXFMT_1BPP:
+				bmw = 0;
+				break;
+			case PIXFMT_2BPP:
+				bmw = 1;
+				break;
+			case PIXFMT_4BPP:
+				bmw = 2;
+				break;
+			case PIXFMT_8BPP:
+				bmw = 3;
+				break;
+			default:
+				break;
+			}
+			winmd |= (bmw << OSD_OSDWIN1MD_BMW1_SHIFT);
+		}
+
+		winmd_mask |= OSD_OSDWIN1MD_OFF1;
+		if (lconfig->interlaced)
+			winmd |= OSD_OSDWIN1MD_OFF1;
+
+		osd_modify(sd, winmd_mask, winmd, OSD_OSDWIN1MD);
+		osd_write(sd, lconfig->line_length >> 5, OSD_OSDWIN1OFST);
+		osd_write(sd, lconfig->xpos, OSD_OSDWIN1XP);
+		osd_write(sd, lconfig->xsize, OSD_OSDWIN1XL);
+		if (lconfig->interlaced) {
+			osd_write(sd, lconfig->ypos >> 1, OSD_OSDWIN1YP);
+			osd_write(sd, lconfig->ysize >> 1, OSD_OSDWIN1YL);
+		} else {
+			osd_write(sd, lconfig->ypos, OSD_OSDWIN1YP);
+			osd_write(sd, lconfig->ysize, OSD_OSDWIN1YL);
+		}
+		break;
+	case WIN_VID1:
+		winmd_mask |= OSD_VIDWINMD_VFF1;
+		if (lconfig->interlaced)
+			winmd |= OSD_VIDWINMD_VFF1;
+
+		osd_modify(sd, winmd_mask, winmd, OSD_VIDWINMD);
+		osd_write(sd, lconfig->line_length >> 5, OSD_VIDWIN1OFST);
+		osd_write(sd, lconfig->xpos, OSD_VIDWIN1XP);
+		osd_write(sd, lconfig->xsize, OSD_VIDWIN1XL);
+		/*
+		 * For YUV420P format the register contents are
+		 * duplicated in both VID registers
+		 */
+		if (sd->vpbe_type == VPBE_VERSION_2) {
+			if (lconfig->pixfmt == PIXFMT_NV12) {
+				/* other window also */
+				if (lconfig->interlaced) {
+					winmd_mask |= OSD_VIDWINMD_VFF0;
+					winmd |= OSD_VIDWINMD_VFF0;
+					osd_modify(sd, winmd_mask, winmd,
+						  OSD_VIDWINMD);
+				}
+				osd_modify(sd, OSD_MISCCTL_S420D,
+					   OSD_MISCCTL_S420D, OSD_MISCCTL);
+				osd_write(sd, lconfig->line_length >> 5,
+					  OSD_VIDWIN0OFST);
+				osd_write(sd, lconfig->xpos, OSD_VIDWIN0XP);
+				osd_write(sd, lconfig->xsize, OSD_VIDWIN0XL);
+			} else {
+				osd_modify(sd, OSD_MISCCTL_S420D,
+					   ~OSD_MISCCTL_S420D, OSD_MISCCTL);
+			}
+		}
+
+		if (lconfig->interlaced) {
+			osd_write(sd, lconfig->ypos >> 1, OSD_VIDWIN1YP);
+			osd_write(sd, lconfig->ysize >> 1, OSD_VIDWIN1YL);
+			if ((sd->vpbe_type == VPBE_VERSION_2) &&
+				lconfig->pixfmt == PIXFMT_NV12) {
+				osd_write(sd, lconfig->ypos >> 1,
+					  OSD_VIDWIN0YP);
+				osd_write(sd, lconfig->ysize >> 1,
+					  OSD_VIDWIN0YL);
+			}
+		} else {
+			osd_write(sd, lconfig->ypos, OSD_VIDWIN1YP);
+			osd_write(sd, lconfig->ysize, OSD_VIDWIN1YL);
+			if ((sd->vpbe_type == VPBE_VERSION_2) &&
+				lconfig->pixfmt == PIXFMT_NV12) {
+				osd_write(sd, lconfig->ypos, OSD_VIDWIN0YP);
+				osd_write(sd, lconfig->ysize, OSD_VIDWIN0YL);
+			}
+		}
+		break;
+	}
+}
+
+static int osd_set_layer_config(struct osd_state *sd, enum osd_layer layer,
+				struct osd_layer_config *lconfig)
+{
+	struct osd_state *osd = sd;
+	struct osd_window_state *win = &osd->win[layer];
+	struct osd_layer_config *cfg = &win->lconfig;
+	unsigned long flags;
+	int reject_config;
+
+	spin_lock_irqsave(&osd->lock, flags);
+
+	reject_config = try_layer_config(sd, layer, lconfig);
+	if (reject_config) {
+		spin_unlock_irqrestore(&osd->lock, flags);
+		return reject_config;
+	}
+
+	/* update the current Cb/Cr order */
+	if (is_yc_pixfmt(lconfig->pixfmt))
+		osd->yc_pixfmt = lconfig->pixfmt;
+
+	/*
+	 * If we are switching OSD1 from normal mode to attribute mode or from
+	 * attribute mode to normal mode, then we must disable the window.
+	 */
+	if (layer == WIN_OSD1) {
+		if (((lconfig->pixfmt == PIXFMT_OSD_ATTR) &&
+		  (cfg->pixfmt != PIXFMT_OSD_ATTR)) ||
+		  ((lconfig->pixfmt != PIXFMT_OSD_ATTR) &&
+		  (cfg->pixfmt == PIXFMT_OSD_ATTR))) {
+			win->is_enabled = 0;
+			_osd_disable_layer(sd, layer);
+		}
+	}
+
+	_osd_set_layer_config(sd, layer, lconfig);
+
+	if (layer == WIN_OSD1) {
+		struct osd_osdwin_state *osdwin_state =
+		    &osd->osdwin[OSDWIN_OSD1];
+
+		if ((lconfig->pixfmt != PIXFMT_OSD_ATTR) &&
+		  (cfg->pixfmt == PIXFMT_OSD_ATTR)) {
+			/*
+			 * We just switched OSD1 from attribute mode to normal
+			 * mode, so we must initialize the CLUT select, the
+			 * blend factor, transparency colorkey enable, and
+			 * attenuation enable (DM6446 only) bits in the
+			 * OSDWIN1MD register.
+			 */
+			_osd_set_osd_clut(sd, OSDWIN_OSD1,
+						   osdwin_state->clut);
+			_osd_set_blending_factor(sd, OSDWIN_OSD1,
+							  osdwin_state->blend);
+			if (osdwin_state->colorkey_blending) {
+				_osd_enable_color_key(sd, OSDWIN_OSD1,
+							       osdwin_state->
+							       colorkey,
+							       lconfig->pixfmt);
+			} else
+				_osd_disable_color_key(sd, OSDWIN_OSD1);
+			_osd_set_rec601_attenuation(sd, OSDWIN_OSD1,
+						    osdwin_state->
+						    rec601_attenuation);
+		} else if ((lconfig->pixfmt == PIXFMT_OSD_ATTR) &&
+		  (cfg->pixfmt != PIXFMT_OSD_ATTR)) {
+			/*
+			 * We just switched OSD1 from normal mode to attribute
+			 * mode, so we must initialize the blink enable and
+			 * blink interval bits in the OSDATRMD register.
+			 */
+			_osd_set_blink_attribute(sd, osd->is_blinking,
+							  osd->blink);
+		}
+	}
+
+	/*
+	 * If we just switched to a 1-, 2-, or 4-bits-per-pixel bitmap format
+	 * then configure a default palette map.
+	 */
+	if ((lconfig->pixfmt != cfg->pixfmt) &&
+	  ((lconfig->pixfmt == PIXFMT_1BPP) ||
+	  (lconfig->pixfmt == PIXFMT_2BPP) ||
+	  (lconfig->pixfmt == PIXFMT_4BPP))) {
+		enum osd_win_layer osdwin =
+		    ((layer == WIN_OSD0) ? OSDWIN_OSD0 : OSDWIN_OSD1);
+		struct osd_osdwin_state *osdwin_state =
+		    &osd->osdwin[osdwin];
+		unsigned char clut_index;
+		unsigned char clut_entries = 0;
+
+		switch (lconfig->pixfmt) {
+		case PIXFMT_1BPP:
+			clut_entries = 2;
+			break;
+		case PIXFMT_2BPP:
+			clut_entries = 4;
+			break;
+		case PIXFMT_4BPP:
+			clut_entries = 16;
+			break;
+		default:
+			break;
+		}
+		/*
+		 * The default palette map maps the pixel value to the clut
+		 * index, i.e. pixel value 0 maps to clut entry 0, pixel value
+		 * 1 maps to clut entry 1, etc.
+		 */
+		for (clut_index = 0; clut_index < 16; clut_index++) {
+			osdwin_state->palette_map[clut_index] = clut_index;
+			if (clut_index < clut_entries) {
+				_osd_set_palette_map(sd, osdwin, clut_index,
+						     clut_index,
+						     lconfig->pixfmt);
+			}
+		}
+	}
+
+	*cfg = *lconfig;
+	/* DM6446: configure the RGB888 enable and window selection */
+	if (osd->win[WIN_VID0].lconfig.pixfmt == PIXFMT_RGB888)
+		_osd_enable_vid_rgb888(sd, WIN_VID0);
+	else if (osd->win[WIN_VID1].lconfig.pixfmt == PIXFMT_RGB888)
+		_osd_enable_vid_rgb888(sd, WIN_VID1);
+	else
+		_osd_disable_vid_rgb888(sd);
+
+	if (layer == WIN_VID0) {
+		osd->pingpong =
+		    _osd_dm6446_vid0_pingpong(sd, osd->field_inversion,
+						       win->fb_base_phys,
+						       cfg);
+	}
+
+	spin_unlock_irqrestore(&osd->lock, flags);
+
+	return 0;
+}
+
+static void osd_init_layer(struct osd_state *sd, enum osd_layer layer)
+{
+	struct osd_state *osd = sd;
+	struct osd_window_state *win = &osd->win[layer];
+	enum osd_win_layer osdwin;
+	struct osd_osdwin_state *osdwin_state;
+	struct osd_layer_config *cfg = &win->lconfig;
+	unsigned long flags;
+
+	spin_lock_irqsave(&osd->lock, flags);
+
+	win->is_enabled = 0;
+	_osd_disable_layer(sd, layer);
+
+	win->h_zoom = ZOOM_X1;
+	win->v_zoom = ZOOM_X1;
+	_osd_set_zoom(sd, layer, win->h_zoom, win->v_zoom);
+
+	win->fb_base_phys = 0;
+	_osd_start_layer(sd, layer, win->fb_base_phys, 0);
+
+	cfg->line_length = 0;
+	cfg->xsize = 0;
+	cfg->ysize = 0;
+	cfg->xpos = 0;
+	cfg->ypos = 0;
+	cfg->interlaced = 0;
+	switch (layer) {
+	case WIN_OSD0:
+	case WIN_OSD1:
+		osdwin = (layer == WIN_OSD0) ? OSDWIN_OSD0 : OSDWIN_OSD1;
+		osdwin_state = &osd->osdwin[osdwin];
+		/*
+		 * Other code relies on the fact that OSD windows default to a
+		 * bitmap pixel format when they are deallocated, so don't
+		 * change this default pixel format.
+		 */
+		cfg->pixfmt = PIXFMT_8BPP;
+		_osd_set_layer_config(sd, layer, cfg);
+		osdwin_state->clut = RAM_CLUT;
+		_osd_set_osd_clut(sd, osdwin, osdwin_state->clut);
+		osdwin_state->colorkey_blending = 0;
+		_osd_disable_color_key(sd, osdwin);
+		osdwin_state->blend = OSD_8_VID_0;
+		_osd_set_blending_factor(sd, osdwin, osdwin_state->blend);
+		osdwin_state->rec601_attenuation = 0;
+		_osd_set_rec601_attenuation(sd, osdwin,
+						     osdwin_state->
+						     rec601_attenuation);
+		if (osdwin == OSDWIN_OSD1) {
+			osd->is_blinking = 0;
+			osd->blink = BLINK_X1;
+		}
+		break;
+	case WIN_VID0:
+	case WIN_VID1:
+		cfg->pixfmt = osd->yc_pixfmt;
+		_osd_set_layer_config(sd, layer, cfg);
+		break;
+	}
+
+	spin_unlock_irqrestore(&osd->lock, flags);
+}
+
+static void osd_release_layer(struct osd_state *sd, enum osd_layer layer)
+{
+	struct osd_state *osd = sd;
+	struct osd_window_state *win = &osd->win[layer];
+	unsigned long flags;
+
+	spin_lock_irqsave(&osd->lock, flags);
+
+	if (!win->is_allocated) {
+		spin_unlock_irqrestore(&osd->lock, flags);
+		return;
+	}
+
+	spin_unlock_irqrestore(&osd->lock, flags);
+	osd_init_layer(sd, layer);
+	spin_lock_irqsave(&osd->lock, flags);
+
+	win->is_allocated = 0;
+
+	spin_unlock_irqrestore(&osd->lock, flags);
+}
+
+static int osd_request_layer(struct osd_state *sd, enum osd_layer layer)
+{
+	struct osd_state *osd = sd;
+	struct osd_window_state *win = &osd->win[layer];
+	unsigned long flags;
+
+	spin_lock_irqsave(&osd->lock, flags);
+
+	if (win->is_allocated) {
+		spin_unlock_irqrestore(&osd->lock, flags);
+		return -1;
+	}
+	win->is_allocated = 1;
+
+	spin_unlock_irqrestore(&osd->lock, flags);
+
+	return 0;
+}
+
+static void _osd_init(struct osd_state *sd)
+{
+	osd_write(sd, 0, OSD_MODE);
+	osd_write(sd, 0, OSD_VIDWINMD);
+	osd_write(sd, 0, OSD_OSDWIN0MD);
+	osd_write(sd, 0, OSD_OSDWIN1MD);
+	osd_write(sd, 0, OSD_RECTCUR);
+	osd_write(sd, 0, OSD_MISCCTL);
+	if (sd->vpbe_type == VPBE_VERSION_3) {
+		osd_write(sd, 0, OSD_VBNDRY);
+		osd_write(sd, 0, OSD_EXTMODE);
+		osd_write(sd, OSD_MISCCTL_DMANG, OSD_MISCCTL);
+	}
+}
+
+static void osd_set_left_margin(struct osd_state *sd, u32 val)
+{
+	osd_write(sd, val, OSD_BASEPX);
+}
+
+static void osd_set_top_margin(struct osd_state *sd, u32 val)
+{
+	osd_write(sd, val, OSD_BASEPY);
+}
+
+static int osd_initialize(struct osd_state *osd)
+{
+	if (osd == NULL)
+		return -ENODEV;
+	_osd_init(osd);
+
+	/* set default Cb/Cr order */
+	osd->yc_pixfmt = PIXFMT_YCBCRI;
+
+	if (osd->vpbe_type == VPBE_VERSION_3) {
+		/*
+		 * ROM CLUT1 on the DM355 is similar (identical?) to ROM CLUT0
+		 * on the DM6446, so make ROM_CLUT1 the default on the DM355.
+		 */
+		osd->rom_clut = ROM_CLUT1;
+	}
+
+	_osd_set_field_inversion(osd, osd->field_inversion);
+	_osd_set_rom_clut(osd, osd->rom_clut);
+
+	osd_init_layer(osd, WIN_OSD0);
+	osd_init_layer(osd, WIN_VID0);
+	osd_init_layer(osd, WIN_OSD1);
+	osd_init_layer(osd, WIN_VID1);
+
+	return 0;
+}
+
+static const struct vpbe_osd_ops osd_ops = {
+	.initialize = osd_initialize,
+	.request_layer = osd_request_layer,
+	.release_layer = osd_release_layer,
+	.enable_layer = osd_enable_layer,
+	.disable_layer = osd_disable_layer,
+	.set_layer_config = osd_set_layer_config,
+	.get_layer_config = osd_get_layer_config,
+	.start_layer = osd_start_layer,
+	.set_left_margin = osd_set_left_margin,
+	.set_top_margin = osd_set_top_margin,
+};
+
+static int osd_probe(struct platform_device *pdev)
+{
+	const struct platform_device_id *pdev_id;
+	struct osd_state *osd;
+	struct resource *res;
+
+	pdev_id = platform_get_device_id(pdev);
+	if (!pdev_id)
+		return -EINVAL;
+
+	osd = devm_kzalloc(&pdev->dev, sizeof(struct osd_state), GFP_KERNEL);
+	if (osd == NULL)
+		return -ENOMEM;
+
+
+	osd->dev = &pdev->dev;
+	osd->vpbe_type = pdev_id->driver_data;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	osd->osd_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(osd->osd_base))
+		return PTR_ERR(osd->osd_base);
+
+	osd->osd_base_phys = res->start;
+	osd->osd_size = resource_size(res);
+	spin_lock_init(&osd->lock);
+	osd->ops = osd_ops;
+	platform_set_drvdata(pdev, osd);
+	dev_notice(osd->dev, "OSD sub device probe success\n");
+
+	return 0;
+}
+
+static int osd_remove(struct platform_device *pdev)
+{
+	return 0;
+}
+
+static struct platform_driver osd_driver = {
+	.probe		= osd_probe,
+	.remove		= osd_remove,
+	.driver		= {
+		.name	= MODULE_NAME,
+	},
+	.id_table	= vpbe_osd_devtype
+};
+
+module_platform_driver(osd_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("DaVinci OSD Manager Driver");
+MODULE_AUTHOR("Texas Instruments");
diff --git a/drivers/media/platform/davinci/vpbe_osd_regs.h b/drivers/media/platform/davinci/vpbe_osd_regs.h
new file mode 100644
index 000000000..584520f3a
--- /dev/null
+++ b/drivers/media/platform/davinci/vpbe_osd_regs.h
@@ -0,0 +1,364 @@
+/*
+ * Copyright (C) 2006-2010 Texas Instruments Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef _VPBE_OSD_REGS_H
+#define _VPBE_OSD_REGS_H
+
+/* VPBE Global Registers */
+#define VPBE_PID				0x0
+#define VPBE_PCR				0x4
+
+/* VPSS CLock Registers */
+#define VPSSCLK_PID				0x00
+#define VPSSCLK_CLKCTRL				0x04
+
+/* VPSS Buffer Logic Registers */
+#define VPSSBL_PID				0x00
+#define VPSSBL_PCR				0x04
+#define VPSSBL_BCR				0x08
+#define VPSSBL_INTSTAT				0x0C
+#define VPSSBL_INTSEL				0x10
+#define VPSSBL_EVTSEL				0x14
+#define VPSSBL_MEMCTRL				0x18
+#define VPSSBL_CCDCMUX				0x1C
+
+/* DM365 ISP5 system configuration */
+#define ISP5_PID				0x0
+#define ISP5_PCCR				0x4
+#define ISP5_BCR				0x8
+#define ISP5_INTSTAT				0xC
+#define ISP5_INTSEL1				0x10
+#define ISP5_INTSEL2				0x14
+#define ISP5_INTSEL3				0x18
+#define ISP5_EVTSEL				0x1c
+#define ISP5_CCDCMUX				0x20
+
+/* VPBE On-Screen Display Subsystem Registers (OSD) */
+#define OSD_MODE				0x00
+#define OSD_VIDWINMD				0x04
+#define OSD_OSDWIN0MD				0x08
+#define OSD_OSDWIN1MD				0x0C
+#define OSD_OSDATRMD				0x0C
+#define OSD_RECTCUR				0x10
+#define OSD_VIDWIN0OFST				0x18
+#define OSD_VIDWIN1OFST				0x1C
+#define OSD_OSDWIN0OFST				0x20
+#define OSD_OSDWIN1OFST				0x24
+#define OSD_VIDWINADH				0x28
+#define OSD_VIDWIN0ADL				0x2C
+#define OSD_VIDWIN0ADR				0x2C
+#define OSD_VIDWIN1ADL				0x30
+#define OSD_VIDWIN1ADR				0x30
+#define OSD_OSDWINADH				0x34
+#define OSD_OSDWIN0ADL				0x38
+#define OSD_OSDWIN0ADR				0x38
+#define OSD_OSDWIN1ADL				0x3C
+#define OSD_OSDWIN1ADR				0x3C
+#define OSD_BASEPX				0x40
+#define OSD_BASEPY				0x44
+#define OSD_VIDWIN0XP				0x48
+#define OSD_VIDWIN0YP				0x4C
+#define OSD_VIDWIN0XL				0x50
+#define OSD_VIDWIN0YL				0x54
+#define OSD_VIDWIN1XP				0x58
+#define OSD_VIDWIN1YP				0x5C
+#define OSD_VIDWIN1XL				0x60
+#define OSD_VIDWIN1YL				0x64
+#define OSD_OSDWIN0XP				0x68
+#define OSD_OSDWIN0YP				0x6C
+#define OSD_OSDWIN0XL				0x70
+#define OSD_OSDWIN0YL				0x74
+#define OSD_OSDWIN1XP				0x78
+#define OSD_OSDWIN1YP				0x7C
+#define OSD_OSDWIN1XL				0x80
+#define OSD_OSDWIN1YL				0x84
+#define OSD_CURXP				0x88
+#define OSD_CURYP				0x8C
+#define OSD_CURXL				0x90
+#define OSD_CURYL				0x94
+#define OSD_W0BMP01				0xA0
+#define OSD_W0BMP23				0xA4
+#define OSD_W0BMP45				0xA8
+#define OSD_W0BMP67				0xAC
+#define OSD_W0BMP89				0xB0
+#define OSD_W0BMPAB				0xB4
+#define OSD_W0BMPCD				0xB8
+#define OSD_W0BMPEF				0xBC
+#define OSD_W1BMP01				0xC0
+#define OSD_W1BMP23				0xC4
+#define OSD_W1BMP45				0xC8
+#define OSD_W1BMP67				0xCC
+#define OSD_W1BMP89				0xD0
+#define OSD_W1BMPAB				0xD4
+#define OSD_W1BMPCD				0xD8
+#define OSD_W1BMPEF				0xDC
+#define OSD_VBNDRY				0xE0
+#define OSD_EXTMODE				0xE4
+#define OSD_MISCCTL				0xE8
+#define OSD_CLUTRAMYCB				0xEC
+#define OSD_CLUTRAMCR				0xF0
+#define OSD_TRANSPVAL				0xF4
+#define OSD_TRANSPVALL				0xF4
+#define OSD_TRANSPVALU				0xF8
+#define OSD_TRANSPBMPIDX			0xFC
+#define OSD_PPVWIN0ADR				0xFC
+
+/* bit definitions */
+#define VPBE_PCR_VENC_DIV			(1 << 1)
+#define VPBE_PCR_CLK_OFF			(1 << 0)
+
+#define VPSSBL_INTSTAT_HSSIINT			(1 << 14)
+#define VPSSBL_INTSTAT_CFALDINT			(1 << 13)
+#define VPSSBL_INTSTAT_IPIPE_INT5		(1 << 12)
+#define VPSSBL_INTSTAT_IPIPE_INT4		(1 << 11)
+#define VPSSBL_INTSTAT_IPIPE_INT3		(1 << 10)
+#define VPSSBL_INTSTAT_IPIPE_INT2		(1 << 9)
+#define VPSSBL_INTSTAT_IPIPE_INT1		(1 << 8)
+#define VPSSBL_INTSTAT_IPIPE_INT0		(1 << 7)
+#define VPSSBL_INTSTAT_IPIPEIFINT		(1 << 6)
+#define VPSSBL_INTSTAT_OSDINT			(1 << 5)
+#define VPSSBL_INTSTAT_VENCINT			(1 << 4)
+#define VPSSBL_INTSTAT_H3AINT			(1 << 3)
+#define VPSSBL_INTSTAT_CCDC_VDINT2		(1 << 2)
+#define VPSSBL_INTSTAT_CCDC_VDINT1		(1 << 1)
+#define VPSSBL_INTSTAT_CCDC_VDINT0		(1 << 0)
+
+/* DM365 ISP5 bit definitions */
+#define ISP5_INTSTAT_VENCINT			(1 << 21)
+#define ISP5_INTSTAT_OSDINT			(1 << 20)
+
+/* VMOD TVTYP options for HDMD=0 */
+#define SDTV_NTSC				0
+#define SDTV_PAL				1
+/* VMOD TVTYP options for HDMD=1 */
+#define HDTV_525P				0
+#define HDTV_625P				1
+#define HDTV_1080I				2
+#define HDTV_720P				3
+
+#define OSD_MODE_CS				(1 << 15)
+#define OSD_MODE_OVRSZ				(1 << 14)
+#define OSD_MODE_OHRSZ				(1 << 13)
+#define OSD_MODE_EF				(1 << 12)
+#define OSD_MODE_VVRSZ				(1 << 11)
+#define OSD_MODE_VHRSZ				(1 << 10)
+#define OSD_MODE_FSINV				(1 << 9)
+#define OSD_MODE_BCLUT				(1 << 8)
+#define OSD_MODE_CABG_SHIFT			0
+#define OSD_MODE_CABG				(0xff << 0)
+
+#define OSD_VIDWINMD_VFINV			(1 << 15)
+#define OSD_VIDWINMD_V1EFC			(1 << 14)
+#define OSD_VIDWINMD_VHZ1_SHIFT			12
+#define OSD_VIDWINMD_VHZ1			(3 << 12)
+#define OSD_VIDWINMD_VVZ1_SHIFT			10
+#define OSD_VIDWINMD_VVZ1			(3 << 10)
+#define OSD_VIDWINMD_VFF1			(1 << 9)
+#define OSD_VIDWINMD_ACT1			(1 << 8)
+#define OSD_VIDWINMD_V0EFC			(1 << 6)
+#define OSD_VIDWINMD_VHZ0_SHIFT			4
+#define OSD_VIDWINMD_VHZ0			(3 << 4)
+#define OSD_VIDWINMD_VVZ0_SHIFT			2
+#define OSD_VIDWINMD_VVZ0			(3 << 2)
+#define OSD_VIDWINMD_VFF0			(1 << 1)
+#define OSD_VIDWINMD_ACT0			(1 << 0)
+
+#define OSD_OSDWIN0MD_ATN0E			(1 << 14)
+#define OSD_OSDWIN0MD_RGB0E			(1 << 13)
+#define OSD_OSDWIN0MD_BMP0MD_SHIFT		13
+#define OSD_OSDWIN0MD_BMP0MD			(3 << 13)
+#define OSD_OSDWIN0MD_CLUTS0			(1 << 12)
+#define OSD_OSDWIN0MD_OHZ0_SHIFT		10
+#define OSD_OSDWIN0MD_OHZ0			(3 << 10)
+#define OSD_OSDWIN0MD_OVZ0_SHIFT		8
+#define OSD_OSDWIN0MD_OVZ0			(3 << 8)
+#define OSD_OSDWIN0MD_BMW0_SHIFT		6
+#define OSD_OSDWIN0MD_BMW0			(3 << 6)
+#define OSD_OSDWIN0MD_BLND0_SHIFT		3
+#define OSD_OSDWIN0MD_BLND0			(7 << 3)
+#define OSD_OSDWIN0MD_TE0			(1 << 2)
+#define OSD_OSDWIN0MD_OFF0			(1 << 1)
+#define OSD_OSDWIN0MD_OACT0			(1 << 0)
+
+#define OSD_OSDWIN1MD_OASW			(1 << 15)
+#define OSD_OSDWIN1MD_ATN1E			(1 << 14)
+#define OSD_OSDWIN1MD_RGB1E			(1 << 13)
+#define OSD_OSDWIN1MD_BMP1MD_SHIFT		13
+#define OSD_OSDWIN1MD_BMP1MD			(3 << 13)
+#define OSD_OSDWIN1MD_CLUTS1			(1 << 12)
+#define OSD_OSDWIN1MD_OHZ1_SHIFT		10
+#define OSD_OSDWIN1MD_OHZ1			(3 << 10)
+#define OSD_OSDWIN1MD_OVZ1_SHIFT		8
+#define OSD_OSDWIN1MD_OVZ1			(3 << 8)
+#define OSD_OSDWIN1MD_BMW1_SHIFT		6
+#define OSD_OSDWIN1MD_BMW1			(3 << 6)
+#define OSD_OSDWIN1MD_BLND1_SHIFT		3
+#define OSD_OSDWIN1MD_BLND1			(7 << 3)
+#define OSD_OSDWIN1MD_TE1			(1 << 2)
+#define OSD_OSDWIN1MD_OFF1			(1 << 1)
+#define OSD_OSDWIN1MD_OACT1			(1 << 0)
+
+#define OSD_OSDATRMD_OASW			(1 << 15)
+#define OSD_OSDATRMD_OHZA_SHIFT			10
+#define OSD_OSDATRMD_OHZA			(3 << 10)
+#define OSD_OSDATRMD_OVZA_SHIFT			8
+#define OSD_OSDATRMD_OVZA			(3 << 8)
+#define OSD_OSDATRMD_BLNKINT_SHIFT		6
+#define OSD_OSDATRMD_BLNKINT			(3 << 6)
+#define OSD_OSDATRMD_OFFA			(1 << 1)
+#define OSD_OSDATRMD_BLNK			(1 << 0)
+
+#define OSD_RECTCUR_RCAD_SHIFT			8
+#define OSD_RECTCUR_RCAD			(0xff << 8)
+#define OSD_RECTCUR_CLUTSR			(1 << 7)
+#define OSD_RECTCUR_RCHW_SHIFT			4
+#define OSD_RECTCUR_RCHW			(7 << 4)
+#define OSD_RECTCUR_RCVW_SHIFT			1
+#define OSD_RECTCUR_RCVW			(7 << 1)
+#define OSD_RECTCUR_RCACT			(1 << 0)
+
+#define OSD_VIDWIN0OFST_V0LO			(0x1ff << 0)
+
+#define OSD_VIDWIN1OFST_V1LO			(0x1ff << 0)
+
+#define OSD_OSDWIN0OFST_O0LO			(0x1ff << 0)
+
+#define OSD_OSDWIN1OFST_O1LO			(0x1ff << 0)
+
+#define OSD_WINOFST_AH_SHIFT			9
+
+#define OSD_VIDWIN0OFST_V0AH			(0xf << 9)
+#define OSD_VIDWIN1OFST_V1AH			(0xf << 9)
+#define OSD_OSDWIN0OFST_O0AH			(0xf << 9)
+#define OSD_OSDWIN1OFST_O1AH			(0xf << 9)
+
+#define OSD_VIDWINADH_V1AH_SHIFT		8
+#define OSD_VIDWINADH_V1AH			(0x7f << 8)
+#define OSD_VIDWINADH_V0AH_SHIFT		0
+#define OSD_VIDWINADH_V0AH			(0x7f << 0)
+
+#define OSD_VIDWIN0ADL_V0AL			(0xffff << 0)
+
+#define OSD_VIDWIN1ADL_V1AL			(0xffff << 0)
+
+#define OSD_OSDWINADH_O1AH_SHIFT		8
+#define OSD_OSDWINADH_O1AH			(0x7f << 8)
+#define OSD_OSDWINADH_O0AH_SHIFT		0
+#define OSD_OSDWINADH_O0AH			(0x7f << 0)
+
+#define OSD_OSDWIN0ADL_O0AL			(0xffff << 0)
+
+#define OSD_OSDWIN1ADL_O1AL			(0xffff << 0)
+
+#define OSD_BASEPX_BPX				(0x3ff << 0)
+
+#define OSD_BASEPY_BPY				(0x1ff << 0)
+
+#define OSD_VIDWIN0XP_V0X			(0x7ff << 0)
+
+#define OSD_VIDWIN0YP_V0Y			(0x7ff << 0)
+
+#define OSD_VIDWIN0XL_V0W			(0x7ff << 0)
+
+#define OSD_VIDWIN0YL_V0H			(0x7ff << 0)
+
+#define OSD_VIDWIN1XP_V1X			(0x7ff << 0)
+
+#define OSD_VIDWIN1YP_V1Y			(0x7ff << 0)
+
+#define OSD_VIDWIN1XL_V1W			(0x7ff << 0)
+
+#define OSD_VIDWIN1YL_V1H			(0x7ff << 0)
+
+#define OSD_OSDWIN0XP_W0X			(0x7ff << 0)
+
+#define OSD_OSDWIN0YP_W0Y			(0x7ff << 0)
+
+#define OSD_OSDWIN0XL_W0W			(0x7ff << 0)
+
+#define OSD_OSDWIN0YL_W0H			(0x7ff << 0)
+
+#define OSD_OSDWIN1XP_W1X			(0x7ff << 0)
+
+#define OSD_OSDWIN1YP_W1Y			(0x7ff << 0)
+
+#define OSD_OSDWIN1XL_W1W			(0x7ff << 0)
+
+#define OSD_OSDWIN1YL_W1H			(0x7ff << 0)
+
+#define OSD_CURXP_RCSX				(0x7ff << 0)
+
+#define OSD_CURYP_RCSY				(0x7ff << 0)
+
+#define OSD_CURXL_RCSW				(0x7ff << 0)
+
+#define OSD_CURYL_RCSH				(0x7ff << 0)
+
+#define OSD_EXTMODE_EXPMDSEL			(1 << 15)
+#define OSD_EXTMODE_SCRNHEXP_SHIFT		13
+#define OSD_EXTMODE_SCRNHEXP			(3 << 13)
+#define OSD_EXTMODE_SCRNVEXP			(1 << 12)
+#define OSD_EXTMODE_OSD1BLDCHR			(1 << 11)
+#define OSD_EXTMODE_OSD0BLDCHR			(1 << 10)
+#define OSD_EXTMODE_ATNOSD1EN			(1 << 9)
+#define OSD_EXTMODE_ATNOSD0EN			(1 << 8)
+#define OSD_EXTMODE_OSDHRSZ15			(1 << 7)
+#define OSD_EXTMODE_VIDHRSZ15			(1 << 6)
+#define OSD_EXTMODE_ZMFILV1HEN			(1 << 5)
+#define OSD_EXTMODE_ZMFILV1VEN			(1 << 4)
+#define OSD_EXTMODE_ZMFILV0HEN			(1 << 3)
+#define OSD_EXTMODE_ZMFILV0VEN			(1 << 2)
+#define OSD_EXTMODE_EXPFILHEN			(1 << 1)
+#define OSD_EXTMODE_EXPFILVEN			(1 << 0)
+
+#define OSD_MISCCTL_BLDSEL			(1 << 15)
+#define OSD_MISCCTL_S420D			(1 << 14)
+#define OSD_MISCCTL_BMAPT			(1 << 13)
+#define OSD_MISCCTL_DM365M			(1 << 12)
+#define OSD_MISCCTL_RGBEN			(1 << 7)
+#define OSD_MISCCTL_RGBWIN			(1 << 6)
+#define OSD_MISCCTL_DMANG			(1 << 6)
+#define OSD_MISCCTL_TMON			(1 << 5)
+#define OSD_MISCCTL_RSEL			(1 << 4)
+#define OSD_MISCCTL_CPBSY			(1 << 3)
+#define OSD_MISCCTL_PPSW			(1 << 2)
+#define OSD_MISCCTL_PPRV			(1 << 1)
+
+#define OSD_CLUTRAMYCB_Y_SHIFT			8
+#define OSD_CLUTRAMYCB_Y			(0xff << 8)
+#define OSD_CLUTRAMYCB_CB_SHIFT			0
+#define OSD_CLUTRAMYCB_CB			(0xff << 0)
+
+#define OSD_CLUTRAMCR_CR_SHIFT			8
+#define OSD_CLUTRAMCR_CR			(0xff << 8)
+#define OSD_CLUTRAMCR_CADDR_SHIFT		0
+#define OSD_CLUTRAMCR_CADDR			(0xff << 0)
+
+#define OSD_TRANSPVAL_RGBTRANS			(0xffff << 0)
+
+#define OSD_TRANSPVALL_RGBL			(0xffff << 0)
+
+#define OSD_TRANSPVALU_Y_SHIFT			8
+#define OSD_TRANSPVALU_Y			(0xff << 8)
+#define OSD_TRANSPVALU_RGBU_SHIFT		0
+#define OSD_TRANSPVALU_RGBU			(0xff << 0)
+
+#define OSD_TRANSPBMPIDX_BMP1_SHIFT		8
+#define OSD_TRANSPBMPIDX_BMP1			(0xff << 8)
+#define OSD_TRANSPBMPIDX_BMP0_SHIFT		0
+#define OSD_TRANSPBMPIDX_BMP0			0xff
+
+#endif				/* _DAVINCI_VPBE_H_ */
diff --git a/drivers/media/platform/davinci/vpbe_venc.c b/drivers/media/platform/davinci/vpbe_venc.c
new file mode 100644
index 000000000..36ed1466b
--- /dev/null
+++ b/drivers/media/platform/davinci/vpbe_venc.c
@@ -0,0 +1,698 @@
+/*
+ * Copyright (C) 2010 Texas Instruments Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/ctype.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/videodev2.h>
+#include <linux/slab.h>
+
+#include <mach/hardware.h>
+#include <mach/mux.h>
+#include <linux/platform_data/i2c-davinci.h>
+
+#include <linux/io.h>
+
+#include <media/davinci/vpbe_types.h>
+#include <media/davinci/vpbe_venc.h>
+#include <media/davinci/vpss.h>
+#include <media/v4l2-device.h>
+
+#include "vpbe_venc_regs.h"
+
+#define MODULE_NAME	"davinci-vpbe-venc"
+
+static struct platform_device_id vpbe_venc_devtype[] = {
+	{
+		.name = DM644X_VPBE_VENC_SUBDEV_NAME,
+		.driver_data = VPBE_VERSION_1,
+	}, {
+		.name = DM365_VPBE_VENC_SUBDEV_NAME,
+		.driver_data = VPBE_VERSION_2,
+	}, {
+		.name = DM355_VPBE_VENC_SUBDEV_NAME,
+		.driver_data = VPBE_VERSION_3,
+	},
+	{
+		/* sentinel */
+	}
+};
+
+MODULE_DEVICE_TABLE(platform, vpbe_venc_devtype);
+
+static int debug = 2;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Debug level 0-2");
+
+struct venc_state {
+	struct v4l2_subdev sd;
+	struct venc_callback *callback;
+	struct venc_platform_data *pdata;
+	struct device *pdev;
+	u32 output;
+	v4l2_std_id std;
+	spinlock_t lock;
+	void __iomem *venc_base;
+	void __iomem *vdaccfg_reg;
+	enum vpbe_version venc_type;
+};
+
+static inline struct venc_state *to_state(struct v4l2_subdev *sd)
+{
+	return container_of(sd, struct venc_state, sd);
+}
+
+static inline u32 venc_read(struct v4l2_subdev *sd, u32 offset)
+{
+	struct venc_state *venc = to_state(sd);
+
+	return readl(venc->venc_base + offset);
+}
+
+static inline u32 venc_write(struct v4l2_subdev *sd, u32 offset, u32 val)
+{
+	struct venc_state *venc = to_state(sd);
+
+	writel(val, (venc->venc_base + offset));
+
+	return val;
+}
+
+static inline u32 venc_modify(struct v4l2_subdev *sd, u32 offset,
+				 u32 val, u32 mask)
+{
+	u32 new_val = (venc_read(sd, offset) & ~mask) | (val & mask);
+
+	venc_write(sd, offset, new_val);
+
+	return new_val;
+}
+
+static inline u32 vdaccfg_write(struct v4l2_subdev *sd, u32 val)
+{
+	struct venc_state *venc = to_state(sd);
+
+	writel(val, venc->vdaccfg_reg);
+
+	val = readl(venc->vdaccfg_reg);
+
+	return val;
+}
+
+#define VDAC_COMPONENT	0x543
+#define VDAC_S_VIDEO	0x210
+/* This function sets the dac of the VPBE for various outputs
+ */
+static int venc_set_dac(struct v4l2_subdev *sd, u32 out_index)
+{
+	switch (out_index) {
+	case 0:
+		v4l2_dbg(debug, 1, sd, "Setting output to Composite\n");
+		venc_write(sd, VENC_DACSEL, 0);
+		break;
+	case 1:
+		v4l2_dbg(debug, 1, sd, "Setting output to Component\n");
+		venc_write(sd, VENC_DACSEL, VDAC_COMPONENT);
+		break;
+	case 2:
+		v4l2_dbg(debug, 1, sd, "Setting output to S-video\n");
+		venc_write(sd, VENC_DACSEL, VDAC_S_VIDEO);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void venc_enabledigitaloutput(struct v4l2_subdev *sd, int benable)
+{
+	struct venc_state *venc = to_state(sd);
+
+	v4l2_dbg(debug, 2, sd, "venc_enabledigitaloutput\n");
+
+	if (benable) {
+		venc_write(sd, VENC_VMOD, 0);
+		venc_write(sd, VENC_CVBS, 0);
+		venc_write(sd, VENC_LCDOUT, 0);
+		venc_write(sd, VENC_HSPLS, 0);
+		venc_write(sd, VENC_HSTART, 0);
+		venc_write(sd, VENC_HVALID, 0);
+		venc_write(sd, VENC_HINT, 0);
+		venc_write(sd, VENC_VSPLS, 0);
+		venc_write(sd, VENC_VSTART, 0);
+		venc_write(sd, VENC_VVALID, 0);
+		venc_write(sd, VENC_VINT, 0);
+		venc_write(sd, VENC_YCCCTL, 0);
+		venc_write(sd, VENC_DACSEL, 0);
+
+	} else {
+		venc_write(sd, VENC_VMOD, 0);
+		/* disable VCLK output pin enable */
+		venc_write(sd, VENC_VIDCTL, 0x141);
+
+		/* Disable output sync pins */
+		venc_write(sd, VENC_SYNCCTL, 0);
+
+		/* Disable DCLOCK */
+		venc_write(sd, VENC_DCLKCTL, 0);
+		venc_write(sd, VENC_DRGBX1, 0x0000057C);
+
+		/* Disable LCD output control (accepting default polarity) */
+		venc_write(sd, VENC_LCDOUT, 0);
+		if (venc->venc_type != VPBE_VERSION_3)
+			venc_write(sd, VENC_CMPNT, 0x100);
+		venc_write(sd, VENC_HSPLS, 0);
+		venc_write(sd, VENC_HINT, 0);
+		venc_write(sd, VENC_HSTART, 0);
+		venc_write(sd, VENC_HVALID, 0);
+
+		venc_write(sd, VENC_VSPLS, 0);
+		venc_write(sd, VENC_VINT, 0);
+		venc_write(sd, VENC_VSTART, 0);
+		venc_write(sd, VENC_VVALID, 0);
+
+		venc_write(sd, VENC_HSDLY, 0);
+		venc_write(sd, VENC_VSDLY, 0);
+
+		venc_write(sd, VENC_YCCCTL, 0);
+		venc_write(sd, VENC_VSTARTA, 0);
+
+		/* Set OSD clock and OSD Sync Adavance registers */
+		venc_write(sd, VENC_OSDCLK0, 1);
+		venc_write(sd, VENC_OSDCLK1, 2);
+	}
+}
+
+static void
+venc_enable_vpss_clock(int venc_type,
+		       enum vpbe_enc_timings_type type,
+		       unsigned int pclock)
+{
+	if (venc_type == VPBE_VERSION_1)
+		return;
+
+	if (venc_type == VPBE_VERSION_2 && (type == VPBE_ENC_STD || (type ==
+	    VPBE_ENC_DV_TIMINGS && pclock <= 27000000))) {
+		vpss_enable_clock(VPSS_VENC_CLOCK_SEL, 1);
+		vpss_enable_clock(VPSS_VPBE_CLOCK, 1);
+		return;
+	}
+
+	if (venc_type == VPBE_VERSION_3 && type == VPBE_ENC_STD)
+		vpss_enable_clock(VPSS_VENC_CLOCK_SEL, 0);
+}
+
+#define VDAC_CONFIG_SD_V3	0x0E21A6B6
+#define VDAC_CONFIG_SD_V2	0x081141CF
+/*
+ * setting NTSC mode
+ */
+static int venc_set_ntsc(struct v4l2_subdev *sd)
+{
+	u32 val;
+	struct venc_state *venc = to_state(sd);
+	struct venc_platform_data *pdata = venc->pdata;
+
+	v4l2_dbg(debug, 2, sd, "venc_set_ntsc\n");
+
+	/* Setup clock at VPSS & VENC for SD */
+	vpss_enable_clock(VPSS_VENC_CLOCK_SEL, 1);
+	if (pdata->setup_clock(VPBE_ENC_STD, V4L2_STD_525_60) < 0)
+		return -EINVAL;
+
+	venc_enable_vpss_clock(venc->venc_type, VPBE_ENC_STD, V4L2_STD_525_60);
+	venc_enabledigitaloutput(sd, 0);
+
+	if (venc->venc_type == VPBE_VERSION_3) {
+		venc_write(sd, VENC_CLKCTL, 0x01);
+		venc_write(sd, VENC_VIDCTL, 0);
+		val = vdaccfg_write(sd, VDAC_CONFIG_SD_V3);
+	} else if (venc->venc_type == VPBE_VERSION_2) {
+		venc_write(sd, VENC_CLKCTL, 0x01);
+		venc_write(sd, VENC_VIDCTL, 0);
+		vdaccfg_write(sd, VDAC_CONFIG_SD_V2);
+	} else {
+		/* to set VENC CLK DIV to 1 - final clock is 54 MHz */
+		venc_modify(sd, VENC_VIDCTL, 0, 1 << 1);
+		/* Set REC656 Mode */
+		venc_write(sd, VENC_YCCCTL, 0x1);
+		venc_modify(sd, VENC_VDPRO, 0, VENC_VDPRO_DAFRQ);
+		venc_modify(sd, VENC_VDPRO, 0, VENC_VDPRO_DAUPS);
+	}
+
+	venc_write(sd, VENC_VMOD, 0);
+	venc_modify(sd, VENC_VMOD, (1 << VENC_VMOD_VIE_SHIFT),
+			VENC_VMOD_VIE);
+	venc_modify(sd, VENC_VMOD, (0 << VENC_VMOD_VMD), VENC_VMOD_VMD);
+	venc_modify(sd, VENC_VMOD, (0 << VENC_VMOD_TVTYP_SHIFT),
+			VENC_VMOD_TVTYP);
+	venc_write(sd, VENC_DACTST, 0x0);
+	venc_modify(sd, VENC_VMOD, VENC_VMOD_VENC, VENC_VMOD_VENC);
+
+	return 0;
+}
+
+/*
+ * setting PAL mode
+ */
+static int venc_set_pal(struct v4l2_subdev *sd)
+{
+	struct venc_state *venc = to_state(sd);
+
+	v4l2_dbg(debug, 2, sd, "venc_set_pal\n");
+
+	/* Setup clock at VPSS & VENC for SD */
+	vpss_enable_clock(VPSS_VENC_CLOCK_SEL, 1);
+	if (venc->pdata->setup_clock(VPBE_ENC_STD, V4L2_STD_625_50) < 0)
+		return -EINVAL;
+
+	venc_enable_vpss_clock(venc->venc_type, VPBE_ENC_STD, V4L2_STD_625_50);
+	venc_enabledigitaloutput(sd, 0);
+
+	if (venc->venc_type == VPBE_VERSION_3) {
+		venc_write(sd, VENC_CLKCTL, 0x1);
+		venc_write(sd, VENC_VIDCTL, 0);
+		vdaccfg_write(sd, VDAC_CONFIG_SD_V3);
+	} else if (venc->venc_type == VPBE_VERSION_2) {
+		venc_write(sd, VENC_CLKCTL, 0x1);
+		venc_write(sd, VENC_VIDCTL, 0);
+		vdaccfg_write(sd, VDAC_CONFIG_SD_V2);
+	} else {
+		/* to set VENC CLK DIV to 1 - final clock is 54 MHz */
+		venc_modify(sd, VENC_VIDCTL, 0, 1 << 1);
+		/* Set REC656 Mode */
+		venc_write(sd, VENC_YCCCTL, 0x1);
+	}
+
+	venc_modify(sd, VENC_SYNCCTL, 1 << VENC_SYNCCTL_OVD_SHIFT,
+			VENC_SYNCCTL_OVD);
+	venc_write(sd, VENC_VMOD, 0);
+	venc_modify(sd, VENC_VMOD,
+			(1 << VENC_VMOD_VIE_SHIFT),
+			VENC_VMOD_VIE);
+	venc_modify(sd, VENC_VMOD,
+			(0 << VENC_VMOD_VMD), VENC_VMOD_VMD);
+	venc_modify(sd, VENC_VMOD,
+			(1 << VENC_VMOD_TVTYP_SHIFT),
+			VENC_VMOD_TVTYP);
+	venc_write(sd, VENC_DACTST, 0x0);
+	venc_modify(sd, VENC_VMOD, VENC_VMOD_VENC, VENC_VMOD_VENC);
+
+	return 0;
+}
+
+#define VDAC_CONFIG_HD_V2	0x081141EF
+/*
+ * venc_set_480p59_94
+ *
+ * This function configures the video encoder to EDTV(525p) component setting.
+ */
+static int venc_set_480p59_94(struct v4l2_subdev *sd)
+{
+	struct venc_state *venc = to_state(sd);
+	struct venc_platform_data *pdata = venc->pdata;
+
+	v4l2_dbg(debug, 2, sd, "venc_set_480p59_94\n");
+	if (venc->venc_type != VPBE_VERSION_1 &&
+	    venc->venc_type != VPBE_VERSION_2)
+		return -EINVAL;
+
+	/* Setup clock at VPSS & VENC for SD */
+	if (pdata->setup_clock(VPBE_ENC_DV_TIMINGS, 27000000) < 0)
+		return -EINVAL;
+
+	venc_enable_vpss_clock(venc->venc_type, VPBE_ENC_DV_TIMINGS, 27000000);
+	venc_enabledigitaloutput(sd, 0);
+
+	if (venc->venc_type == VPBE_VERSION_2)
+		vdaccfg_write(sd, VDAC_CONFIG_HD_V2);
+	venc_write(sd, VENC_OSDCLK0, 0);
+	venc_write(sd, VENC_OSDCLK1, 1);
+
+	if (venc->venc_type == VPBE_VERSION_1) {
+		venc_modify(sd, VENC_VDPRO, VENC_VDPRO_DAFRQ,
+			    VENC_VDPRO_DAFRQ);
+		venc_modify(sd, VENC_VDPRO, VENC_VDPRO_DAUPS,
+			    VENC_VDPRO_DAUPS);
+	}
+
+	venc_write(sd, VENC_VMOD, 0);
+	venc_modify(sd, VENC_VMOD, (1 << VENC_VMOD_VIE_SHIFT),
+		    VENC_VMOD_VIE);
+	venc_modify(sd, VENC_VMOD, VENC_VMOD_HDMD, VENC_VMOD_HDMD);
+	venc_modify(sd, VENC_VMOD, (HDTV_525P << VENC_VMOD_TVTYP_SHIFT),
+		    VENC_VMOD_TVTYP);
+	venc_modify(sd, VENC_VMOD, VENC_VMOD_VDMD_YCBCR8 <<
+		    VENC_VMOD_VDMD_SHIFT, VENC_VMOD_VDMD);
+
+	venc_modify(sd, VENC_VMOD, VENC_VMOD_VENC, VENC_VMOD_VENC);
+
+	return 0;
+}
+
+/*
+ * venc_set_625p
+ *
+ * This function configures the video encoder to HDTV(625p) component setting
+ */
+static int venc_set_576p50(struct v4l2_subdev *sd)
+{
+	struct venc_state *venc = to_state(sd);
+	struct venc_platform_data *pdata = venc->pdata;
+
+	v4l2_dbg(debug, 2, sd, "venc_set_576p50\n");
+
+	if (venc->venc_type != VPBE_VERSION_1 &&
+	    venc->venc_type != VPBE_VERSION_2)
+		return -EINVAL;
+	/* Setup clock at VPSS & VENC for SD */
+	if (pdata->setup_clock(VPBE_ENC_DV_TIMINGS, 27000000) < 0)
+		return -EINVAL;
+
+	venc_enable_vpss_clock(venc->venc_type, VPBE_ENC_DV_TIMINGS, 27000000);
+	venc_enabledigitaloutput(sd, 0);
+
+	if (venc->venc_type == VPBE_VERSION_2)
+		vdaccfg_write(sd, VDAC_CONFIG_HD_V2);
+
+	venc_write(sd, VENC_OSDCLK0, 0);
+	venc_write(sd, VENC_OSDCLK1, 1);
+
+	if (venc->venc_type == VPBE_VERSION_1) {
+		venc_modify(sd, VENC_VDPRO, VENC_VDPRO_DAFRQ,
+			    VENC_VDPRO_DAFRQ);
+		venc_modify(sd, VENC_VDPRO, VENC_VDPRO_DAUPS,
+			    VENC_VDPRO_DAUPS);
+	}
+
+	venc_write(sd, VENC_VMOD, 0);
+	venc_modify(sd, VENC_VMOD, (1 << VENC_VMOD_VIE_SHIFT),
+		    VENC_VMOD_VIE);
+	venc_modify(sd, VENC_VMOD, VENC_VMOD_HDMD, VENC_VMOD_HDMD);
+	venc_modify(sd, VENC_VMOD, (HDTV_625P << VENC_VMOD_TVTYP_SHIFT),
+		    VENC_VMOD_TVTYP);
+
+	venc_modify(sd, VENC_VMOD, VENC_VMOD_VDMD_YCBCR8 <<
+		    VENC_VMOD_VDMD_SHIFT, VENC_VMOD_VDMD);
+	venc_modify(sd, VENC_VMOD, VENC_VMOD_VENC, VENC_VMOD_VENC);
+
+	return 0;
+}
+
+/*
+ * venc_set_720p60_internal - Setup 720p60 in venc for dm365 only
+ */
+static int venc_set_720p60_internal(struct v4l2_subdev *sd)
+{
+	struct venc_state *venc = to_state(sd);
+	struct venc_platform_data *pdata = venc->pdata;
+
+	if (pdata->setup_clock(VPBE_ENC_DV_TIMINGS, 74250000) < 0)
+		return -EINVAL;
+
+	venc_enable_vpss_clock(venc->venc_type, VPBE_ENC_DV_TIMINGS, 74250000);
+	venc_enabledigitaloutput(sd, 0);
+
+	venc_write(sd, VENC_OSDCLK0, 0);
+	venc_write(sd, VENC_OSDCLK1, 1);
+
+	venc_write(sd, VENC_VMOD, 0);
+	/* DM365 component HD mode */
+	venc_modify(sd, VENC_VMOD, (1 << VENC_VMOD_VIE_SHIFT),
+	    VENC_VMOD_VIE);
+	venc_modify(sd, VENC_VMOD, VENC_VMOD_HDMD, VENC_VMOD_HDMD);
+	venc_modify(sd, VENC_VMOD, (HDTV_720P << VENC_VMOD_TVTYP_SHIFT),
+		    VENC_VMOD_TVTYP);
+	venc_modify(sd, VENC_VMOD, VENC_VMOD_VENC, VENC_VMOD_VENC);
+	venc_write(sd, VENC_XHINTVL, 0);
+	return 0;
+}
+
+/*
+ * venc_set_1080i30_internal - Setup 1080i30 in venc for dm365 only
+ */
+static int venc_set_1080i30_internal(struct v4l2_subdev *sd)
+{
+	struct venc_state *venc = to_state(sd);
+	struct venc_platform_data *pdata = venc->pdata;
+
+	if (pdata->setup_clock(VPBE_ENC_DV_TIMINGS, 74250000) < 0)
+		return -EINVAL;
+
+	venc_enable_vpss_clock(venc->venc_type, VPBE_ENC_DV_TIMINGS, 74250000);
+	venc_enabledigitaloutput(sd, 0);
+
+	venc_write(sd, VENC_OSDCLK0, 0);
+	venc_write(sd, VENC_OSDCLK1, 1);
+
+
+	venc_write(sd, VENC_VMOD, 0);
+	/* DM365 component HD mode */
+	venc_modify(sd, VENC_VMOD, (1 << VENC_VMOD_VIE_SHIFT),
+		    VENC_VMOD_VIE);
+	venc_modify(sd, VENC_VMOD, VENC_VMOD_HDMD, VENC_VMOD_HDMD);
+	venc_modify(sd, VENC_VMOD, (HDTV_1080I << VENC_VMOD_TVTYP_SHIFT),
+		    VENC_VMOD_TVTYP);
+	venc_modify(sd, VENC_VMOD, VENC_VMOD_VENC, VENC_VMOD_VENC);
+	venc_write(sd, VENC_XHINTVL, 0);
+	return 0;
+}
+
+static int venc_s_std_output(struct v4l2_subdev *sd, v4l2_std_id norm)
+{
+	v4l2_dbg(debug, 1, sd, "venc_s_std_output\n");
+
+	if (norm & V4L2_STD_525_60)
+		return venc_set_ntsc(sd);
+	else if (norm & V4L2_STD_625_50)
+		return venc_set_pal(sd);
+
+	return -EINVAL;
+}
+
+static int venc_s_dv_timings(struct v4l2_subdev *sd,
+			    struct v4l2_dv_timings *dv_timings)
+{
+	struct venc_state *venc = to_state(sd);
+	u32 height = dv_timings->bt.height;
+	int ret;
+
+	v4l2_dbg(debug, 1, sd, "venc_s_dv_timings\n");
+
+	if (height == 576)
+		return venc_set_576p50(sd);
+	else if (height == 480)
+		return venc_set_480p59_94(sd);
+	else if ((height == 720) &&
+			(venc->venc_type == VPBE_VERSION_2)) {
+		/* TBD setup internal 720p mode here */
+		ret = venc_set_720p60_internal(sd);
+		/* for DM365 VPBE, there is DAC inside */
+		vdaccfg_write(sd, VDAC_CONFIG_HD_V2);
+		return ret;
+	} else if ((height == 1080) &&
+		(venc->venc_type == VPBE_VERSION_2)) {
+		/* TBD setup internal 1080i mode here */
+		ret = venc_set_1080i30_internal(sd);
+		/* for DM365 VPBE, there is DAC inside */
+		vdaccfg_write(sd, VDAC_CONFIG_HD_V2);
+		return ret;
+	}
+	return -EINVAL;
+}
+
+static int venc_s_routing(struct v4l2_subdev *sd, u32 input, u32 output,
+			  u32 config)
+{
+	struct venc_state *venc = to_state(sd);
+	int ret;
+
+	v4l2_dbg(debug, 1, sd, "venc_s_routing\n");
+
+	ret = venc_set_dac(sd, output);
+	if (!ret)
+		venc->output = output;
+
+	return ret;
+}
+
+static long venc_ioctl(struct v4l2_subdev *sd,
+			unsigned int cmd,
+			void *arg)
+{
+	u32 val;
+
+	switch (cmd) {
+	case VENC_GET_FLD:
+		val = venc_read(sd, VENC_VSTAT);
+		*((int *)arg) = ((val & VENC_VSTAT_FIDST) ==
+		VENC_VSTAT_FIDST);
+		break;
+	default:
+		v4l2_err(sd, "Wrong IOCTL cmd\n");
+		break;
+	}
+
+	return 0;
+}
+
+static const struct v4l2_subdev_core_ops venc_core_ops = {
+	.ioctl      = venc_ioctl,
+};
+
+static const struct v4l2_subdev_video_ops venc_video_ops = {
+	.s_routing = venc_s_routing,
+	.s_std_output = venc_s_std_output,
+	.s_dv_timings = venc_s_dv_timings,
+};
+
+static const struct v4l2_subdev_ops venc_ops = {
+	.core = &venc_core_ops,
+	.video = &venc_video_ops,
+};
+
+static int venc_initialize(struct v4l2_subdev *sd)
+{
+	struct venc_state *venc = to_state(sd);
+	int ret;
+
+	/* Set default to output to composite and std to NTSC */
+	venc->output = 0;
+	venc->std = V4L2_STD_525_60;
+
+	ret = venc_s_routing(sd, 0, venc->output, 0);
+	if (ret < 0) {
+		v4l2_err(sd, "Error setting output during init\n");
+		return -EINVAL;
+	}
+
+	ret = venc_s_std_output(sd, venc->std);
+	if (ret < 0) {
+		v4l2_err(sd, "Error setting std during init\n");
+		return -EINVAL;
+	}
+
+	return ret;
+}
+
+static int venc_device_get(struct device *dev, void *data)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct venc_state **venc = data;
+
+	if (strstr(pdev->name, "vpbe-venc") != NULL)
+		*venc = platform_get_drvdata(pdev);
+
+	return 0;
+}
+
+struct v4l2_subdev *venc_sub_dev_init(struct v4l2_device *v4l2_dev,
+		const char *venc_name)
+{
+	struct venc_state *venc;
+	int err;
+
+	err = bus_for_each_dev(&platform_bus_type, NULL, &venc,
+			venc_device_get);
+	if (venc == NULL)
+		return NULL;
+
+	v4l2_subdev_init(&venc->sd, &venc_ops);
+
+	strcpy(venc->sd.name, venc_name);
+	if (v4l2_device_register_subdev(v4l2_dev, &venc->sd) < 0) {
+		v4l2_err(v4l2_dev,
+			"vpbe unable to register venc sub device\n");
+		return NULL;
+	}
+	if (venc_initialize(&venc->sd)) {
+		v4l2_err(v4l2_dev,
+			"vpbe venc initialization failed\n");
+		return NULL;
+	}
+
+	return &venc->sd;
+}
+EXPORT_SYMBOL(venc_sub_dev_init);
+
+static int venc_probe(struct platform_device *pdev)
+{
+	const struct platform_device_id *pdev_id;
+	struct venc_state *venc;
+	struct resource *res;
+
+	if (!pdev->dev.platform_data) {
+		dev_err(&pdev->dev, "No platform data for VENC sub device");
+		return -EINVAL;
+	}
+
+	pdev_id = platform_get_device_id(pdev);
+	if (!pdev_id)
+		return -EINVAL;
+
+	venc = devm_kzalloc(&pdev->dev, sizeof(struct venc_state), GFP_KERNEL);
+	if (venc == NULL)
+		return -ENOMEM;
+
+	venc->venc_type = pdev_id->driver_data;
+	venc->pdev = &pdev->dev;
+	venc->pdata = pdev->dev.platform_data;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	venc->venc_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(venc->venc_base))
+		return PTR_ERR(venc->venc_base);
+
+	if (venc->venc_type != VPBE_VERSION_1) {
+		res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+
+		venc->vdaccfg_reg = devm_ioremap_resource(&pdev->dev, res);
+		if (IS_ERR(venc->vdaccfg_reg))
+			return PTR_ERR(venc->vdaccfg_reg);
+	}
+	spin_lock_init(&venc->lock);
+	platform_set_drvdata(pdev, venc);
+	dev_notice(venc->pdev, "VENC sub device probe success\n");
+
+	return 0;
+}
+
+static int venc_remove(struct platform_device *pdev)
+{
+	return 0;
+}
+
+static struct platform_driver venc_driver = {
+	.probe		= venc_probe,
+	.remove		= venc_remove,
+	.driver		= {
+		.name	= MODULE_NAME,
+	},
+	.id_table	= vpbe_venc_devtype
+};
+
+module_platform_driver(venc_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("VPBE VENC Driver");
+MODULE_AUTHOR("Texas Instruments");
diff --git a/drivers/media/platform/davinci/vpbe_venc_regs.h b/drivers/media/platform/davinci/vpbe_venc_regs.h
new file mode 100644
index 000000000..947cb1510
--- /dev/null
+++ b/drivers/media/platform/davinci/vpbe_venc_regs.h
@@ -0,0 +1,177 @@
+/*
+ * Copyright (C) 2006-2010 Texas Instruments Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2..
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef _VPBE_VENC_REGS_H
+#define _VPBE_VENC_REGS_H
+
+/* VPBE Video Encoder / Digital LCD Subsystem Registers (VENC) */
+#define VENC_VMOD				0x00
+#define VENC_VIDCTL				0x04
+#define VENC_VDPRO				0x08
+#define VENC_SYNCCTL				0x0C
+#define VENC_HSPLS				0x10
+#define VENC_VSPLS				0x14
+#define VENC_HINT				0x18
+#define VENC_HSTART				0x1C
+#define VENC_HVALID				0x20
+#define VENC_VINT				0x24
+#define VENC_VSTART				0x28
+#define VENC_VVALID				0x2C
+#define VENC_HSDLY				0x30
+#define VENC_VSDLY				0x34
+#define VENC_YCCCTL				0x38
+#define VENC_RGBCTL				0x3C
+#define VENC_RGBCLP				0x40
+#define VENC_LINECTL				0x44
+#define VENC_CULLLINE				0x48
+#define VENC_LCDOUT				0x4C
+#define VENC_BRTS				0x50
+#define VENC_BRTW				0x54
+#define VENC_ACCTL				0x58
+#define VENC_PWMP				0x5C
+#define VENC_PWMW				0x60
+#define VENC_DCLKCTL				0x64
+#define VENC_DCLKPTN0				0x68
+#define VENC_DCLKPTN1				0x6C
+#define VENC_DCLKPTN2				0x70
+#define VENC_DCLKPTN3				0x74
+#define VENC_DCLKPTN0A				0x78
+#define VENC_DCLKPTN1A				0x7C
+#define VENC_DCLKPTN2A				0x80
+#define VENC_DCLKPTN3A				0x84
+#define VENC_DCLKHS				0x88
+#define VENC_DCLKHSA				0x8C
+#define VENC_DCLKHR				0x90
+#define VENC_DCLKVS				0x94
+#define VENC_DCLKVR				0x98
+#define VENC_CAPCTL				0x9C
+#define VENC_CAPDO				0xA0
+#define VENC_CAPDE				0xA4
+#define VENC_ATR0				0xA8
+#define VENC_ATR1				0xAC
+#define VENC_ATR2				0xB0
+#define VENC_VSTAT				0xB8
+#define VENC_RAMADR				0xBC
+#define VENC_RAMPORT				0xC0
+#define VENC_DACTST				0xC4
+#define VENC_YCOLVL				0xC8
+#define VENC_SCPROG				0xCC
+#define VENC_CVBS				0xDC
+#define VENC_CMPNT				0xE0
+#define VENC_ETMG0				0xE4
+#define VENC_ETMG1				0xE8
+#define VENC_ETMG2				0xEC
+#define VENC_ETMG3				0xF0
+#define VENC_DACSEL				0xF4
+#define VENC_ARGBX0				0x100
+#define VENC_ARGBX1				0x104
+#define VENC_ARGBX2				0x108
+#define VENC_ARGBX3				0x10C
+#define VENC_ARGBX4				0x110
+#define VENC_DRGBX0				0x114
+#define VENC_DRGBX1				0x118
+#define VENC_DRGBX2				0x11C
+#define VENC_DRGBX3				0x120
+#define VENC_DRGBX4				0x124
+#define VENC_VSTARTA				0x128
+#define VENC_OSDCLK0				0x12C
+#define VENC_OSDCLK1				0x130
+#define VENC_HVLDCL0				0x134
+#define VENC_HVLDCL1				0x138
+#define VENC_OSDHADV				0x13C
+#define VENC_CLKCTL				0x140
+#define VENC_GAMCTL				0x144
+#define VENC_XHINTVL				0x174
+
+/* bit definitions */
+#define VPBE_PCR_VENC_DIV			(1 << 1)
+#define VPBE_PCR_CLK_OFF			(1 << 0)
+
+#define VENC_VMOD_VDMD_SHIFT			12
+#define VENC_VMOD_VDMD_YCBCR16			0
+#define VENC_VMOD_VDMD_YCBCR8			1
+#define VENC_VMOD_VDMD_RGB666			2
+#define VENC_VMOD_VDMD_RGB8			3
+#define VENC_VMOD_VDMD_EPSON			4
+#define VENC_VMOD_VDMD_CASIO			5
+#define VENC_VMOD_VDMD_UDISPQVGA		6
+#define VENC_VMOD_VDMD_STNLCD			7
+#define VENC_VMOD_VIE_SHIFT			1
+#define VENC_VMOD_VDMD				(7 << 12)
+#define VENC_VMOD_ITLCL				(1 << 11)
+#define VENC_VMOD_ITLC				(1 << 10)
+#define VENC_VMOD_NSIT				(1 << 9)
+#define VENC_VMOD_HDMD				(1 << 8)
+#define VENC_VMOD_TVTYP_SHIFT			6
+#define VENC_VMOD_TVTYP				(3 << 6)
+#define VENC_VMOD_SLAVE				(1 << 5)
+#define VENC_VMOD_VMD				(1 << 4)
+#define VENC_VMOD_BLNK				(1 << 3)
+#define VENC_VMOD_VIE				(1 << 1)
+#define VENC_VMOD_VENC				(1 << 0)
+
+/* VMOD TVTYP options for HDMD=0 */
+#define SDTV_NTSC				0
+#define SDTV_PAL				1
+/* VMOD TVTYP options for HDMD=1 */
+#define HDTV_525P				0
+#define HDTV_625P				1
+#define HDTV_1080I				2
+#define HDTV_720P				3
+
+#define VENC_VIDCTL_VCLKP			(1 << 14)
+#define VENC_VIDCTL_VCLKE_SHIFT			13
+#define VENC_VIDCTL_VCLKE			(1 << 13)
+#define VENC_VIDCTL_VCLKZ_SHIFT			12
+#define VENC_VIDCTL_VCLKZ			(1 << 12)
+#define VENC_VIDCTL_SYDIR_SHIFT			8
+#define VENC_VIDCTL_SYDIR			(1 << 8)
+#define VENC_VIDCTL_DOMD_SHIFT			4
+#define VENC_VIDCTL_DOMD			(3 << 4)
+#define VENC_VIDCTL_YCDIR_SHIFT			0
+#define VENC_VIDCTL_YCDIR			(1 << 0)
+
+#define VENC_VDPRO_ATYCC_SHIFT			5
+#define VENC_VDPRO_ATYCC			(1 << 5)
+#define VENC_VDPRO_ATCOM_SHIFT			4
+#define VENC_VDPRO_ATCOM			(1 << 4)
+#define VENC_VDPRO_DAFRQ			(1 << 3)
+#define VENC_VDPRO_DAUPS			(1 << 2)
+#define VENC_VDPRO_CUPS				(1 << 1)
+#define VENC_VDPRO_YUPS				(1 << 0)
+
+#define VENC_SYNCCTL_VPL_SHIFT			3
+#define VENC_SYNCCTL_VPL			(1 << 3)
+#define VENC_SYNCCTL_HPL_SHIFT			2
+#define VENC_SYNCCTL_HPL			(1 << 2)
+#define VENC_SYNCCTL_SYEV_SHIFT			1
+#define VENC_SYNCCTL_SYEV			(1 << 1)
+#define VENC_SYNCCTL_SYEH_SHIFT			0
+#define VENC_SYNCCTL_SYEH			(1 << 0)
+#define VENC_SYNCCTL_OVD_SHIFT			14
+#define VENC_SYNCCTL_OVD			(1 << 14)
+
+#define VENC_DCLKCTL_DCKEC_SHIFT		11
+#define VENC_DCLKCTL_DCKEC			(1 << 11)
+#define VENC_DCLKCTL_DCKPW_SHIFT		0
+#define VENC_DCLKCTL_DCKPW			(0x3f << 0)
+
+#define VENC_VSTAT_FIDST			(1 << 4)
+
+#define VENC_CMPNT_MRGB_SHIFT			14
+#define VENC_CMPNT_MRGB				(1 << 14)
+
+#endif				/* _VPBE_VENC_REGS_H */
diff --git a/drivers/media/platform/davinci/vpfe_capture.c b/drivers/media/platform/davinci/vpfe_capture.c
new file mode 100644
index 000000000..ccfcf3f52
--- /dev/null
+++ b/drivers/media/platform/davinci/vpfe_capture.c
@@ -0,0 +1,2028 @@
+/*
+ * Copyright (C) 2008-2009 Texas Instruments Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ * Driver name : VPFE Capture driver
+ *    VPFE Capture driver allows applications to capture and stream video
+ *    frames on DaVinci SoCs (DM6446, DM355 etc) from a YUV source such as
+ *    TVP5146 or  Raw Bayer RGB image data from an image sensor
+ *    such as Microns' MT9T001, MT9T031 etc.
+ *
+ *    These SoCs have, in common, a Video Processing Subsystem (VPSS) that
+ *    consists of a Video Processing Front End (VPFE) for capturing
+ *    video/raw image data and Video Processing Back End (VPBE) for displaying
+ *    YUV data through an in-built analog encoder or Digital LCD port. This
+ *    driver is for capture through VPFE. A typical EVM using these SoCs have
+ *    following high level configuration.
+ *
+ *
+ *    decoder(TVP5146/		YUV/
+ * 	     MT9T001)   -->  Raw Bayer RGB ---> MUX -> VPFE (CCDC/ISIF)
+ *    				data input              |      |
+ *							V      |
+ *						      SDRAM    |
+ *							       V
+ *							   Image Processor
+ *							       |
+ *							       V
+ *							     SDRAM
+ *    The data flow happens from a decoder connected to the VPFE over a
+ *    YUV embedded (BT.656/BT.1120) or separate sync or raw bayer rgb interface
+ *    and to the input of VPFE through an optional MUX (if more inputs are
+ *    to be interfaced on the EVM). The input data is first passed through
+ *    CCDC (CCD Controller, a.k.a Image Sensor Interface, ISIF). The CCDC
+ *    does very little or no processing on YUV data and does pre-process Raw
+ *    Bayer RGB data through modules such as Defect Pixel Correction (DFC)
+ *    Color Space Conversion (CSC), data gain/offset etc. After this, data
+ *    can be written to SDRAM or can be connected to the image processing
+ *    block such as IPIPE (on DM355 only).
+ *
+ *    Features supported
+ *  		- MMAP IO
+ *		- Capture using TVP5146 over BT.656
+ *		- support for interfacing decoders using sub device model
+ *		- Work with DM355 or DM6446 CCDC to do Raw Bayer RGB/YUV
+ *		  data capture to SDRAM.
+ *    TODO list
+ *		- Support multiple REQBUF after open
+ *		- Support for de-allocating buffers through REQBUF
+ *		- Support for Raw Bayer RGB capture
+ *		- Support for chaining Image Processor
+ *		- Support for static allocation of buffers
+ *		- Support for USERPTR IO
+ *		- Support for STREAMON before QBUF
+ *		- Support for control ioctls
+ */
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <media/v4l2-common.h>
+#include <linux/io.h>
+#include <media/davinci/vpfe_capture.h>
+#include "ccdc_hw_device.h"
+
+static int debug;
+static u32 numbuffers = 3;
+static u32 bufsize = (720 * 576 * 2);
+
+module_param(numbuffers, uint, S_IRUGO);
+module_param(bufsize, uint, S_IRUGO);
+module_param(debug, int, 0644);
+
+MODULE_PARM_DESC(numbuffers, "buffer count (default:3)");
+MODULE_PARM_DESC(bufsize, "buffer size in bytes (default:720 x 576 x 2)");
+MODULE_PARM_DESC(debug, "Debug level 0-1");
+
+MODULE_DESCRIPTION("VPFE Video for Linux Capture Driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Texas Instruments");
+
+/* standard information */
+struct vpfe_standard {
+	v4l2_std_id std_id;
+	unsigned int width;
+	unsigned int height;
+	struct v4l2_fract pixelaspect;
+	/* 0 - progressive, 1 - interlaced */
+	int frame_format;
+};
+
+/* ccdc configuration */
+struct ccdc_config {
+	/* This make sure vpfe is probed and ready to go */
+	int vpfe_probed;
+	/* name of ccdc device */
+	char name[32];
+};
+
+/* data structures */
+static struct vpfe_config_params config_params = {
+	.min_numbuffers = 3,
+	.numbuffers = 3,
+	.min_bufsize = 720 * 480 * 2,
+	.device_bufsize = 720 * 576 * 2,
+};
+
+/* ccdc device registered */
+static struct ccdc_hw_device *ccdc_dev;
+/* lock for accessing ccdc information */
+static DEFINE_MUTEX(ccdc_lock);
+/* ccdc configuration */
+static struct ccdc_config *ccdc_cfg;
+
+static const struct vpfe_standard vpfe_standards[] = {
+	{V4L2_STD_525_60, 720, 480, {11, 10}, 1},
+	{V4L2_STD_625_50, 720, 576, {54, 59}, 1},
+};
+
+/* Used when raw Bayer image from ccdc is directly captured to SDRAM */
+static const struct vpfe_pixel_format vpfe_pix_fmts[] = {
+	{
+		.fmtdesc = {
+			.index = 0,
+			.type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
+			.description = "Bayer GrRBGb 8bit A-Law compr.",
+			.pixelformat = V4L2_PIX_FMT_SBGGR8,
+		},
+		.bpp = 1,
+	},
+	{
+		.fmtdesc = {
+			.index = 1,
+			.type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
+			.description = "Bayer GrRBGb - 16bit",
+			.pixelformat = V4L2_PIX_FMT_SBGGR16,
+		},
+		.bpp = 2,
+	},
+	{
+		.fmtdesc = {
+			.index = 2,
+			.type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
+			.description = "Bayer GrRBGb 8bit DPCM compr.",
+			.pixelformat = V4L2_PIX_FMT_SGRBG10DPCM8,
+		},
+		.bpp = 1,
+	},
+	{
+		.fmtdesc = {
+			.index = 3,
+			.type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
+			.description = "YCbCr 4:2:2 Interleaved UYVY",
+			.pixelformat = V4L2_PIX_FMT_UYVY,
+		},
+		.bpp = 2,
+	},
+	{
+		.fmtdesc = {
+			.index = 4,
+			.type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
+			.description = "YCbCr 4:2:2 Interleaved YUYV",
+			.pixelformat = V4L2_PIX_FMT_YUYV,
+		},
+		.bpp = 2,
+	},
+	{
+		.fmtdesc = {
+			.index = 5,
+			.type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
+			.description = "Y/CbCr 4:2:0 - Semi planar",
+			.pixelformat = V4L2_PIX_FMT_NV12,
+		},
+		.bpp = 1,
+	},
+};
+
+/*
+ * vpfe_lookup_pix_format()
+ * lookup an entry in the vpfe pix format table based on pix_format
+ */
+static const struct vpfe_pixel_format *vpfe_lookup_pix_format(u32 pix_format)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(vpfe_pix_fmts); i++) {
+		if (pix_format == vpfe_pix_fmts[i].fmtdesc.pixelformat)
+			return &vpfe_pix_fmts[i];
+	}
+	return NULL;
+}
+
+/*
+ * vpfe_register_ccdc_device. CCDC module calls this to
+ * register with vpfe capture
+ */
+int vpfe_register_ccdc_device(struct ccdc_hw_device *dev)
+{
+	int ret = 0;
+	printk(KERN_NOTICE "vpfe_register_ccdc_device: %s\n", dev->name);
+
+	BUG_ON(!dev->hw_ops.open);
+	BUG_ON(!dev->hw_ops.enable);
+	BUG_ON(!dev->hw_ops.set_hw_if_params);
+	BUG_ON(!dev->hw_ops.configure);
+	BUG_ON(!dev->hw_ops.set_buftype);
+	BUG_ON(!dev->hw_ops.get_buftype);
+	BUG_ON(!dev->hw_ops.enum_pix);
+	BUG_ON(!dev->hw_ops.set_frame_format);
+	BUG_ON(!dev->hw_ops.get_frame_format);
+	BUG_ON(!dev->hw_ops.get_pixel_format);
+	BUG_ON(!dev->hw_ops.set_pixel_format);
+	BUG_ON(!dev->hw_ops.set_image_window);
+	BUG_ON(!dev->hw_ops.get_image_window);
+	BUG_ON(!dev->hw_ops.get_line_length);
+	BUG_ON(!dev->hw_ops.getfid);
+
+	mutex_lock(&ccdc_lock);
+	if (NULL == ccdc_cfg) {
+		/*
+		 * TODO. Will this ever happen? if so, we need to fix it.
+		 * Proabably we need to add the request to a linked list and
+		 * walk through it during vpfe probe
+		 */
+		printk(KERN_ERR "vpfe capture not initialized\n");
+		ret = -EFAULT;
+		goto unlock;
+	}
+
+	if (strcmp(dev->name, ccdc_cfg->name)) {
+		/* ignore this ccdc */
+		ret = -EINVAL;
+		goto unlock;
+	}
+
+	if (ccdc_dev) {
+		printk(KERN_ERR "ccdc already registered\n");
+		ret = -EINVAL;
+		goto unlock;
+	}
+
+	ccdc_dev = dev;
+unlock:
+	mutex_unlock(&ccdc_lock);
+	return ret;
+}
+EXPORT_SYMBOL(vpfe_register_ccdc_device);
+
+/*
+ * vpfe_unregister_ccdc_device. CCDC module calls this to
+ * unregister with vpfe capture
+ */
+void vpfe_unregister_ccdc_device(struct ccdc_hw_device *dev)
+{
+	if (NULL == dev) {
+		printk(KERN_ERR "invalid ccdc device ptr\n");
+		return;
+	}
+
+	printk(KERN_NOTICE "vpfe_unregister_ccdc_device, dev->name = %s\n",
+		dev->name);
+
+	if (strcmp(dev->name, ccdc_cfg->name)) {
+		/* ignore this ccdc */
+		return;
+	}
+
+	mutex_lock(&ccdc_lock);
+	ccdc_dev = NULL;
+	mutex_unlock(&ccdc_lock);
+	return;
+}
+EXPORT_SYMBOL(vpfe_unregister_ccdc_device);
+
+/*
+ * vpfe_get_ccdc_image_format - Get image parameters based on CCDC settings
+ */
+static int vpfe_get_ccdc_image_format(struct vpfe_device *vpfe_dev,
+				 struct v4l2_format *f)
+{
+	struct v4l2_rect image_win;
+	enum ccdc_buftype buf_type;
+	enum ccdc_frmfmt frm_fmt;
+
+	memset(f, 0, sizeof(*f));
+	f->type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
+	ccdc_dev->hw_ops.get_image_window(&image_win);
+	f->fmt.pix.width = image_win.width;
+	f->fmt.pix.height = image_win.height;
+	f->fmt.pix.bytesperline = ccdc_dev->hw_ops.get_line_length();
+	f->fmt.pix.sizeimage = f->fmt.pix.bytesperline *
+				f->fmt.pix.height;
+	buf_type = ccdc_dev->hw_ops.get_buftype();
+	f->fmt.pix.pixelformat = ccdc_dev->hw_ops.get_pixel_format();
+	frm_fmt = ccdc_dev->hw_ops.get_frame_format();
+	if (frm_fmt == CCDC_FRMFMT_PROGRESSIVE)
+		f->fmt.pix.field = V4L2_FIELD_NONE;
+	else if (frm_fmt == CCDC_FRMFMT_INTERLACED) {
+		if (buf_type == CCDC_BUFTYPE_FLD_INTERLEAVED)
+			f->fmt.pix.field = V4L2_FIELD_INTERLACED;
+		else if (buf_type == CCDC_BUFTYPE_FLD_SEPARATED)
+			f->fmt.pix.field = V4L2_FIELD_SEQ_TB;
+		else {
+			v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf_type\n");
+			return -EINVAL;
+		}
+	} else {
+		v4l2_err(&vpfe_dev->v4l2_dev, "Invalid frm_fmt\n");
+		return -EINVAL;
+	}
+	return 0;
+}
+
+/*
+ * vpfe_config_ccdc_image_format()
+ * For a pix format, configure ccdc to setup the capture
+ */
+static int vpfe_config_ccdc_image_format(struct vpfe_device *vpfe_dev)
+{
+	enum ccdc_frmfmt frm_fmt = CCDC_FRMFMT_INTERLACED;
+	int ret = 0;
+
+	if (ccdc_dev->hw_ops.set_pixel_format(
+			vpfe_dev->fmt.fmt.pix.pixelformat) < 0) {
+		v4l2_err(&vpfe_dev->v4l2_dev,
+			"couldn't set pix format in ccdc\n");
+		return -EINVAL;
+	}
+	/* configure the image window */
+	ccdc_dev->hw_ops.set_image_window(&vpfe_dev->crop);
+
+	switch (vpfe_dev->fmt.fmt.pix.field) {
+	case V4L2_FIELD_INTERLACED:
+		/* do nothing, since it is default */
+		ret = ccdc_dev->hw_ops.set_buftype(
+				CCDC_BUFTYPE_FLD_INTERLEAVED);
+		break;
+	case V4L2_FIELD_NONE:
+		frm_fmt = CCDC_FRMFMT_PROGRESSIVE;
+		/* buffer type only applicable for interlaced scan */
+		break;
+	case V4L2_FIELD_SEQ_TB:
+		ret = ccdc_dev->hw_ops.set_buftype(
+				CCDC_BUFTYPE_FLD_SEPARATED);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* set the frame format */
+	if (!ret)
+		ret = ccdc_dev->hw_ops.set_frame_format(frm_fmt);
+	return ret;
+}
+/*
+ * vpfe_config_image_format()
+ * For a given standard, this functions sets up the default
+ * pix format & crop values in the vpfe device and ccdc.  It first
+ * starts with defaults based values from the standard table.
+ * It then checks if sub device support g_mbus_fmt and then override the
+ * values based on that.Sets crop values to match with scan resolution
+ * starting at 0,0. It calls vpfe_config_ccdc_image_format() set the
+ * values in ccdc
+ */
+static int vpfe_config_image_format(struct vpfe_device *vpfe_dev,
+				    v4l2_std_id std_id)
+{
+	struct vpfe_subdev_info *sdinfo = vpfe_dev->current_subdev;
+	struct v4l2_mbus_framefmt mbus_fmt;
+	struct v4l2_pix_format *pix = &vpfe_dev->fmt.fmt.pix;
+	int i, ret = 0;
+
+	for (i = 0; i < ARRAY_SIZE(vpfe_standards); i++) {
+		if (vpfe_standards[i].std_id & std_id) {
+			vpfe_dev->std_info.active_pixels =
+					vpfe_standards[i].width;
+			vpfe_dev->std_info.active_lines =
+					vpfe_standards[i].height;
+			vpfe_dev->std_info.frame_format =
+					vpfe_standards[i].frame_format;
+			vpfe_dev->std_index = i;
+			break;
+		}
+	}
+
+	if (i ==  ARRAY_SIZE(vpfe_standards)) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "standard not supported\n");
+		return -EINVAL;
+	}
+
+	vpfe_dev->crop.top = 0;
+	vpfe_dev->crop.left = 0;
+	vpfe_dev->crop.width = vpfe_dev->std_info.active_pixels;
+	vpfe_dev->crop.height = vpfe_dev->std_info.active_lines;
+	pix->width = vpfe_dev->crop.width;
+	pix->height = vpfe_dev->crop.height;
+
+	/* first field and frame format based on standard frame format */
+	if (vpfe_dev->std_info.frame_format) {
+		pix->field = V4L2_FIELD_INTERLACED;
+		/* assume V4L2_PIX_FMT_UYVY as default */
+		pix->pixelformat = V4L2_PIX_FMT_UYVY;
+		v4l2_fill_mbus_format(&mbus_fmt, pix,
+				MEDIA_BUS_FMT_YUYV10_2X10);
+	} else {
+		pix->field = V4L2_FIELD_NONE;
+		/* assume V4L2_PIX_FMT_SBGGR8 */
+		pix->pixelformat = V4L2_PIX_FMT_SBGGR8;
+		v4l2_fill_mbus_format(&mbus_fmt, pix,
+				MEDIA_BUS_FMT_SBGGR8_1X8);
+	}
+
+	/* if sub device supports g_mbus_fmt, override the defaults */
+	ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev,
+			sdinfo->grp_id, video, g_mbus_fmt, &mbus_fmt);
+
+	if (ret && ret != -ENOIOCTLCMD) {
+		v4l2_err(&vpfe_dev->v4l2_dev,
+			"error in getting g_mbus_fmt from sub device\n");
+		return ret;
+	}
+	v4l2_fill_pix_format(pix, &mbus_fmt);
+	pix->bytesperline = pix->width * 2;
+	pix->sizeimage = pix->bytesperline * pix->height;
+
+	/* Sets the values in CCDC */
+	ret = vpfe_config_ccdc_image_format(vpfe_dev);
+	if (ret)
+		return ret;
+
+	/* Update the values of sizeimage and bytesperline */
+	pix->bytesperline = ccdc_dev->hw_ops.get_line_length();
+	pix->sizeimage = pix->bytesperline * pix->height;
+
+	return 0;
+}
+
+static int vpfe_initialize_device(struct vpfe_device *vpfe_dev)
+{
+	int ret = 0;
+
+	/* set first input of current subdevice as the current input */
+	vpfe_dev->current_input = 0;
+
+	/* set default standard */
+	vpfe_dev->std_index = 0;
+
+	/* Configure the default format information */
+	ret = vpfe_config_image_format(vpfe_dev,
+				vpfe_standards[vpfe_dev->std_index].std_id);
+	if (ret)
+		return ret;
+
+	/* now open the ccdc device to initialize it */
+	mutex_lock(&ccdc_lock);
+	if (NULL == ccdc_dev) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "ccdc device not registered\n");
+		ret = -ENODEV;
+		goto unlock;
+	}
+
+	if (!try_module_get(ccdc_dev->owner)) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "Couldn't lock ccdc module\n");
+		ret = -ENODEV;
+		goto unlock;
+	}
+	ret = ccdc_dev->hw_ops.open(vpfe_dev->pdev);
+	if (!ret)
+		vpfe_dev->initialized = 1;
+
+	/* Clear all VPFE/CCDC interrupts */
+	if (vpfe_dev->cfg->clr_intr)
+		vpfe_dev->cfg->clr_intr(-1);
+
+unlock:
+	mutex_unlock(&ccdc_lock);
+	return ret;
+}
+
+/*
+ * vpfe_open : It creates object of file handle structure and
+ * stores it in private_data  member of filepointer
+ */
+static int vpfe_open(struct file *file)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+	struct video_device *vdev = video_devdata(file);
+	struct vpfe_fh *fh;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_open\n");
+
+	if (!vpfe_dev->cfg->num_subdevs) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "No decoder registered\n");
+		return -ENODEV;
+	}
+
+	/* Allocate memory for the file handle object */
+	fh = kmalloc(sizeof(struct vpfe_fh), GFP_KERNEL);
+	if (NULL == fh) {
+		v4l2_err(&vpfe_dev->v4l2_dev,
+			"unable to allocate memory for file handle object\n");
+		return -ENOMEM;
+	}
+	/* store pointer to fh in private_data member of file */
+	file->private_data = fh;
+	fh->vpfe_dev = vpfe_dev;
+	v4l2_fh_init(&fh->fh, vdev);
+	mutex_lock(&vpfe_dev->lock);
+	/* If decoder is not initialized. initialize it */
+	if (!vpfe_dev->initialized) {
+		if (vpfe_initialize_device(vpfe_dev)) {
+			mutex_unlock(&vpfe_dev->lock);
+			return -ENODEV;
+		}
+	}
+	/* Increment device usrs counter */
+	vpfe_dev->usrs++;
+	/* Set io_allowed member to false */
+	fh->io_allowed = 0;
+	v4l2_fh_add(&fh->fh);
+	mutex_unlock(&vpfe_dev->lock);
+	return 0;
+}
+
+static void vpfe_schedule_next_buffer(struct vpfe_device *vpfe_dev)
+{
+	unsigned long addr;
+
+	vpfe_dev->next_frm = list_entry(vpfe_dev->dma_queue.next,
+					struct videobuf_buffer, queue);
+	list_del(&vpfe_dev->next_frm->queue);
+	vpfe_dev->next_frm->state = VIDEOBUF_ACTIVE;
+	addr = videobuf_to_dma_contig(vpfe_dev->next_frm);
+
+	ccdc_dev->hw_ops.setfbaddr(addr);
+}
+
+static void vpfe_schedule_bottom_field(struct vpfe_device *vpfe_dev)
+{
+	unsigned long addr;
+
+	addr = videobuf_to_dma_contig(vpfe_dev->cur_frm);
+	addr += vpfe_dev->field_off;
+	ccdc_dev->hw_ops.setfbaddr(addr);
+}
+
+static void vpfe_process_buffer_complete(struct vpfe_device *vpfe_dev)
+{
+	v4l2_get_timestamp(&vpfe_dev->cur_frm->ts);
+	vpfe_dev->cur_frm->state = VIDEOBUF_DONE;
+	vpfe_dev->cur_frm->size = vpfe_dev->fmt.fmt.pix.sizeimage;
+	wake_up_interruptible(&vpfe_dev->cur_frm->done);
+	vpfe_dev->cur_frm = vpfe_dev->next_frm;
+}
+
+/* ISR for VINT0*/
+static irqreturn_t vpfe_isr(int irq, void *dev_id)
+{
+	struct vpfe_device *vpfe_dev = dev_id;
+	enum v4l2_field field;
+	int fid;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "\nStarting vpfe_isr...\n");
+	field = vpfe_dev->fmt.fmt.pix.field;
+
+	/* if streaming not started, don't do anything */
+	if (!vpfe_dev->started)
+		goto clear_intr;
+
+	/* only for 6446 this will be applicable */
+	if (NULL != ccdc_dev->hw_ops.reset)
+		ccdc_dev->hw_ops.reset();
+
+	if (field == V4L2_FIELD_NONE) {
+		/* handle progressive frame capture */
+		v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev,
+			"frame format is progressive...\n");
+		if (vpfe_dev->cur_frm != vpfe_dev->next_frm)
+			vpfe_process_buffer_complete(vpfe_dev);
+		goto clear_intr;
+	}
+
+	/* interlaced or TB capture check which field we are in hardware */
+	fid = ccdc_dev->hw_ops.getfid();
+
+	/* switch the software maintained field id */
+	vpfe_dev->field_id ^= 1;
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "field id = %x:%x.\n",
+		fid, vpfe_dev->field_id);
+	if (fid == vpfe_dev->field_id) {
+		/* we are in-sync here,continue */
+		if (fid == 0) {
+			/*
+			 * One frame is just being captured. If the next frame
+			 * is available, release the current frame and move on
+			 */
+			if (vpfe_dev->cur_frm != vpfe_dev->next_frm)
+				vpfe_process_buffer_complete(vpfe_dev);
+			/*
+			 * based on whether the two fields are stored
+			 * interleavely or separately in memory, reconfigure
+			 * the CCDC memory address
+			 */
+			if (field == V4L2_FIELD_SEQ_TB) {
+				vpfe_schedule_bottom_field(vpfe_dev);
+			}
+			goto clear_intr;
+		}
+		/*
+		 * if one field is just being captured configure
+		 * the next frame get the next frame from the empty
+		 * queue if no frame is available hold on to the
+		 * current buffer
+		 */
+		spin_lock(&vpfe_dev->dma_queue_lock);
+		if (!list_empty(&vpfe_dev->dma_queue) &&
+		    vpfe_dev->cur_frm == vpfe_dev->next_frm)
+			vpfe_schedule_next_buffer(vpfe_dev);
+		spin_unlock(&vpfe_dev->dma_queue_lock);
+	} else if (fid == 0) {
+		/*
+		 * out of sync. Recover from any hardware out-of-sync.
+		 * May loose one frame
+		 */
+		vpfe_dev->field_id = fid;
+	}
+clear_intr:
+	if (vpfe_dev->cfg->clr_intr)
+		vpfe_dev->cfg->clr_intr(irq);
+
+	return IRQ_HANDLED;
+}
+
+/* vdint1_isr - isr handler for VINT1 interrupt */
+static irqreturn_t vdint1_isr(int irq, void *dev_id)
+{
+	struct vpfe_device *vpfe_dev = dev_id;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "\nInside vdint1_isr...\n");
+
+	/* if streaming not started, don't do anything */
+	if (!vpfe_dev->started) {
+		if (vpfe_dev->cfg->clr_intr)
+			vpfe_dev->cfg->clr_intr(irq);
+		return IRQ_HANDLED;
+	}
+
+	spin_lock(&vpfe_dev->dma_queue_lock);
+	if ((vpfe_dev->fmt.fmt.pix.field == V4L2_FIELD_NONE) &&
+	    !list_empty(&vpfe_dev->dma_queue) &&
+	    vpfe_dev->cur_frm == vpfe_dev->next_frm)
+		vpfe_schedule_next_buffer(vpfe_dev);
+	spin_unlock(&vpfe_dev->dma_queue_lock);
+
+	if (vpfe_dev->cfg->clr_intr)
+		vpfe_dev->cfg->clr_intr(irq);
+
+	return IRQ_HANDLED;
+}
+
+static void vpfe_detach_irq(struct vpfe_device *vpfe_dev)
+{
+	enum ccdc_frmfmt frame_format;
+
+	frame_format = ccdc_dev->hw_ops.get_frame_format();
+	if (frame_format == CCDC_FRMFMT_PROGRESSIVE)
+		free_irq(vpfe_dev->ccdc_irq1, vpfe_dev);
+}
+
+static int vpfe_attach_irq(struct vpfe_device *vpfe_dev)
+{
+	enum ccdc_frmfmt frame_format;
+
+	frame_format = ccdc_dev->hw_ops.get_frame_format();
+	if (frame_format == CCDC_FRMFMT_PROGRESSIVE) {
+		return request_irq(vpfe_dev->ccdc_irq1, vdint1_isr,
+				    0, "vpfe_capture1",
+				    vpfe_dev);
+	}
+	return 0;
+}
+
+/* vpfe_stop_ccdc_capture: stop streaming in ccdc/isif */
+static void vpfe_stop_ccdc_capture(struct vpfe_device *vpfe_dev)
+{
+	vpfe_dev->started = 0;
+	ccdc_dev->hw_ops.enable(0);
+	if (ccdc_dev->hw_ops.enable_out_to_sdram)
+		ccdc_dev->hw_ops.enable_out_to_sdram(0);
+}
+
+/*
+ * vpfe_release : This function deletes buffer queue, frees the
+ * buffers and the vpfe file  handle
+ */
+static int vpfe_release(struct file *file)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+	struct vpfe_fh *fh = file->private_data;
+	struct vpfe_subdev_info *sdinfo;
+	int ret;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_release\n");
+
+	/* Get the device lock */
+	mutex_lock(&vpfe_dev->lock);
+	/* if this instance is doing IO */
+	if (fh->io_allowed) {
+		if (vpfe_dev->started) {
+			sdinfo = vpfe_dev->current_subdev;
+			ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev,
+							 sdinfo->grp_id,
+							 video, s_stream, 0);
+			if (ret && (ret != -ENOIOCTLCMD))
+				v4l2_err(&vpfe_dev->v4l2_dev,
+				"stream off failed in subdev\n");
+			vpfe_stop_ccdc_capture(vpfe_dev);
+			vpfe_detach_irq(vpfe_dev);
+			videobuf_streamoff(&vpfe_dev->buffer_queue);
+		}
+		vpfe_dev->io_usrs = 0;
+		vpfe_dev->numbuffers = config_params.numbuffers;
+		videobuf_stop(&vpfe_dev->buffer_queue);
+		videobuf_mmap_free(&vpfe_dev->buffer_queue);
+	}
+
+	/* Decrement device usrs counter */
+	vpfe_dev->usrs--;
+	v4l2_fh_del(&fh->fh);
+	v4l2_fh_exit(&fh->fh);
+	/* If this is the last file handle */
+	if (!vpfe_dev->usrs) {
+		vpfe_dev->initialized = 0;
+		if (ccdc_dev->hw_ops.close)
+			ccdc_dev->hw_ops.close(vpfe_dev->pdev);
+		module_put(ccdc_dev->owner);
+	}
+	mutex_unlock(&vpfe_dev->lock);
+	file->private_data = NULL;
+	/* Free memory allocated to file handle object */
+	kfree(fh);
+	return 0;
+}
+
+/*
+ * vpfe_mmap : It is used to map kernel space buffers
+ * into user spaces
+ */
+static int vpfe_mmap(struct file *file, struct vm_area_struct *vma)
+{
+	/* Get the device object and file handle object */
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_mmap\n");
+
+	return videobuf_mmap_mapper(&vpfe_dev->buffer_queue, vma);
+}
+
+/*
+ * vpfe_poll: It is used for select/poll system call
+ */
+static unsigned int vpfe_poll(struct file *file, poll_table *wait)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_poll\n");
+
+	if (vpfe_dev->started)
+		return videobuf_poll_stream(file,
+					    &vpfe_dev->buffer_queue, wait);
+	return 0;
+}
+
+/* vpfe capture driver file operations */
+static const struct v4l2_file_operations vpfe_fops = {
+	.owner = THIS_MODULE,
+	.open = vpfe_open,
+	.release = vpfe_release,
+	.unlocked_ioctl = video_ioctl2,
+	.mmap = vpfe_mmap,
+	.poll = vpfe_poll
+};
+
+/*
+ * vpfe_check_format()
+ * This function adjust the input pixel format as per hardware
+ * capabilities and update the same in pixfmt.
+ * Following algorithm used :-
+ *
+ *	If given pixformat is not in the vpfe list of pix formats or not
+ *	supported by the hardware, current value of pixformat in the device
+ *	is used
+ *	If given field is not supported, then current field is used. If field
+ *	is different from current, then it is matched with that from sub device.
+ *	Minimum height is 2 lines for interlaced or tb field and 1 line for
+ *	progressive. Maximum height is clamped to active active lines of scan
+ *	Minimum width is 32 bytes in memory and width is clamped to active
+ *	pixels of scan.
+ *	bytesperline is a multiple of 32.
+ */
+static const struct vpfe_pixel_format *
+	vpfe_check_format(struct vpfe_device *vpfe_dev,
+			  struct v4l2_pix_format *pixfmt)
+{
+	u32 min_height = 1, min_width = 32, max_width, max_height;
+	const struct vpfe_pixel_format *vpfe_pix_fmt;
+	u32 pix;
+	int temp, found;
+
+	vpfe_pix_fmt = vpfe_lookup_pix_format(pixfmt->pixelformat);
+	if (NULL == vpfe_pix_fmt) {
+		/*
+		 * use current pixel format in the vpfe device. We
+		 * will find this pix format in the table
+		 */
+		pixfmt->pixelformat = vpfe_dev->fmt.fmt.pix.pixelformat;
+		vpfe_pix_fmt = vpfe_lookup_pix_format(pixfmt->pixelformat);
+	}
+
+	/* check if hw supports it */
+	temp = 0;
+	found = 0;
+	while (ccdc_dev->hw_ops.enum_pix(&pix, temp) >= 0) {
+		if (vpfe_pix_fmt->fmtdesc.pixelformat == pix) {
+			found = 1;
+			break;
+		}
+		temp++;
+	}
+
+	if (!found) {
+		/* use current pixel format */
+		pixfmt->pixelformat = vpfe_dev->fmt.fmt.pix.pixelformat;
+		/*
+		 * Since this is currently used in the vpfe device, we
+		 * will find this pix format in the table
+		 */
+		vpfe_pix_fmt = vpfe_lookup_pix_format(pixfmt->pixelformat);
+	}
+
+	/* check what field format is supported */
+	if (pixfmt->field == V4L2_FIELD_ANY) {
+		/* if field is any, use current value as default */
+		pixfmt->field = vpfe_dev->fmt.fmt.pix.field;
+	}
+
+	/*
+	 * if field is not same as current field in the vpfe device
+	 * try matching the field with the sub device field
+	 */
+	if (vpfe_dev->fmt.fmt.pix.field != pixfmt->field) {
+		/*
+		 * If field value is not in the supported fields, use current
+		 * field used in the device as default
+		 */
+		switch (pixfmt->field) {
+		case V4L2_FIELD_INTERLACED:
+		case V4L2_FIELD_SEQ_TB:
+			/* if sub device is supporting progressive, use that */
+			if (!vpfe_dev->std_info.frame_format)
+				pixfmt->field = V4L2_FIELD_NONE;
+			break;
+		case V4L2_FIELD_NONE:
+			if (vpfe_dev->std_info.frame_format)
+				pixfmt->field = V4L2_FIELD_INTERLACED;
+			break;
+
+		default:
+			/* use current field as default */
+			pixfmt->field = vpfe_dev->fmt.fmt.pix.field;
+			break;
+		}
+	}
+
+	/* Now adjust image resolutions supported */
+	if (pixfmt->field == V4L2_FIELD_INTERLACED ||
+	    pixfmt->field == V4L2_FIELD_SEQ_TB)
+		min_height = 2;
+
+	max_width = vpfe_dev->std_info.active_pixels;
+	max_height = vpfe_dev->std_info.active_lines;
+	min_width /= vpfe_pix_fmt->bpp;
+
+	v4l2_info(&vpfe_dev->v4l2_dev, "width = %d, height = %d, bpp = %d\n",
+		  pixfmt->width, pixfmt->height, vpfe_pix_fmt->bpp);
+
+	pixfmt->width = clamp((pixfmt->width), min_width, max_width);
+	pixfmt->height = clamp((pixfmt->height), min_height, max_height);
+
+	/* If interlaced, adjust height to be a multiple of 2 */
+	if (pixfmt->field == V4L2_FIELD_INTERLACED)
+		pixfmt->height &= (~1);
+	/*
+	 * recalculate bytesperline and sizeimage since width
+	 * and height might have changed
+	 */
+	pixfmt->bytesperline = (((pixfmt->width * vpfe_pix_fmt->bpp) + 31)
+				& ~31);
+	if (pixfmt->pixelformat == V4L2_PIX_FMT_NV12)
+		pixfmt->sizeimage =
+			pixfmt->bytesperline * pixfmt->height +
+			((pixfmt->bytesperline * pixfmt->height) >> 1);
+	else
+		pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height;
+
+	v4l2_info(&vpfe_dev->v4l2_dev, "adjusted width = %d, height ="
+		 " %d, bpp = %d, bytesperline = %d, sizeimage = %d\n",
+		 pixfmt->width, pixfmt->height, vpfe_pix_fmt->bpp,
+		 pixfmt->bytesperline, pixfmt->sizeimage);
+	return vpfe_pix_fmt;
+}
+
+static int vpfe_querycap(struct file *file, void  *priv,
+			       struct v4l2_capability *cap)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_querycap\n");
+
+	cap->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING;
+	cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS;
+	strlcpy(cap->driver, CAPTURE_DRV_NAME, sizeof(cap->driver));
+	strlcpy(cap->bus_info, "VPFE", sizeof(cap->bus_info));
+	strlcpy(cap->card, vpfe_dev->cfg->card_name, sizeof(cap->card));
+	return 0;
+}
+
+static int vpfe_g_fmt_vid_cap(struct file *file, void *priv,
+				struct v4l2_format *fmt)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_fmt_vid_cap\n");
+	/* Fill in the information about format */
+	*fmt = vpfe_dev->fmt;
+	return 0;
+}
+
+static int vpfe_enum_fmt_vid_cap(struct file *file, void  *priv,
+				   struct v4l2_fmtdesc *fmt)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+	const struct vpfe_pixel_format *pix_fmt;
+	int temp_index;
+	u32 pix;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_enum_fmt_vid_cap\n");
+
+	if (ccdc_dev->hw_ops.enum_pix(&pix, fmt->index) < 0)
+		return -EINVAL;
+
+	/* Fill in the information about format */
+	pix_fmt = vpfe_lookup_pix_format(pix);
+	if (NULL != pix_fmt) {
+		temp_index = fmt->index;
+		*fmt = pix_fmt->fmtdesc;
+		fmt->index = temp_index;
+		return 0;
+	}
+	return -EINVAL;
+}
+
+static int vpfe_s_fmt_vid_cap(struct file *file, void *priv,
+				struct v4l2_format *fmt)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+	const struct vpfe_pixel_format *pix_fmts;
+	int ret = 0;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_fmt_vid_cap\n");
+
+	/* If streaming is started, return error */
+	if (vpfe_dev->started) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "Streaming is started\n");
+		return -EBUSY;
+	}
+
+	/* Check for valid frame format */
+	pix_fmts = vpfe_check_format(vpfe_dev, &fmt->fmt.pix);
+
+	if (NULL == pix_fmts)
+		return -EINVAL;
+
+	/* store the pixel format in the device  object */
+	ret = mutex_lock_interruptible(&vpfe_dev->lock);
+	if (ret)
+		return ret;
+
+	/* First detach any IRQ if currently attached */
+	vpfe_detach_irq(vpfe_dev);
+	vpfe_dev->fmt = *fmt;
+	/* set image capture parameters in the ccdc */
+	ret = vpfe_config_ccdc_image_format(vpfe_dev);
+	mutex_unlock(&vpfe_dev->lock);
+	return ret;
+}
+
+static int vpfe_try_fmt_vid_cap(struct file *file, void *priv,
+				  struct v4l2_format *f)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+	const struct vpfe_pixel_format *pix_fmts;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_try_fmt_vid_cap\n");
+
+	pix_fmts = vpfe_check_format(vpfe_dev, &f->fmt.pix);
+	if (NULL == pix_fmts)
+		return -EINVAL;
+	return 0;
+}
+
+/*
+ * vpfe_get_subdev_input_index - Get subdev index and subdev input index for a
+ * given app input index
+ */
+static int vpfe_get_subdev_input_index(struct vpfe_device *vpfe_dev,
+					int *subdev_index,
+					int *subdev_input_index,
+					int app_input_index)
+{
+	struct vpfe_config *cfg = vpfe_dev->cfg;
+	struct vpfe_subdev_info *sdinfo;
+	int i, j = 0;
+
+	for (i = 0; i < cfg->num_subdevs; i++) {
+		sdinfo = &cfg->sub_devs[i];
+		if (app_input_index < (j + sdinfo->num_inputs)) {
+			*subdev_index = i;
+			*subdev_input_index = app_input_index - j;
+			return 0;
+		}
+		j += sdinfo->num_inputs;
+	}
+	return -EINVAL;
+}
+
+/*
+ * vpfe_get_app_input - Get app input index for a given subdev input index
+ * driver stores the input index of the current sub device and translate it
+ * when application request the current input
+ */
+static int vpfe_get_app_input_index(struct vpfe_device *vpfe_dev,
+				    int *app_input_index)
+{
+	struct vpfe_config *cfg = vpfe_dev->cfg;
+	struct vpfe_subdev_info *sdinfo;
+	int i, j = 0;
+
+	for (i = 0; i < cfg->num_subdevs; i++) {
+		sdinfo = &cfg->sub_devs[i];
+		if (!strcmp(sdinfo->name, vpfe_dev->current_subdev->name)) {
+			if (vpfe_dev->current_input >= sdinfo->num_inputs)
+				return -1;
+			*app_input_index = j + vpfe_dev->current_input;
+			return 0;
+		}
+		j += sdinfo->num_inputs;
+	}
+	return -EINVAL;
+}
+
+static int vpfe_enum_input(struct file *file, void *priv,
+				 struct v4l2_input *inp)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+	struct vpfe_subdev_info *sdinfo;
+	int subdev, index ;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_enum_input\n");
+
+	if (vpfe_get_subdev_input_index(vpfe_dev,
+					&subdev,
+					&index,
+					inp->index) < 0) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "input information not found"
+			 " for the subdev\n");
+		return -EINVAL;
+	}
+	sdinfo = &vpfe_dev->cfg->sub_devs[subdev];
+	memcpy(inp, &sdinfo->inputs[index], sizeof(struct v4l2_input));
+	return 0;
+}
+
+static int vpfe_g_input(struct file *file, void *priv, unsigned int *index)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_input\n");
+
+	return vpfe_get_app_input_index(vpfe_dev, index);
+}
+
+
+static int vpfe_s_input(struct file *file, void *priv, unsigned int index)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+	struct v4l2_subdev *sd;
+	struct vpfe_subdev_info *sdinfo;
+	int subdev_index, inp_index;
+	struct vpfe_route *route;
+	u32 input = 0, output = 0;
+	int ret = -EINVAL;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_input\n");
+
+	ret = mutex_lock_interruptible(&vpfe_dev->lock);
+	if (ret)
+		return ret;
+
+	/*
+	 * If streaming is started return device busy
+	 * error
+	 */
+	if (vpfe_dev->started) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "Streaming is on\n");
+		ret = -EBUSY;
+		goto unlock_out;
+	}
+	ret = vpfe_get_subdev_input_index(vpfe_dev,
+					  &subdev_index,
+					  &inp_index,
+					  index);
+	if (ret < 0) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "invalid input index\n");
+		goto unlock_out;
+	}
+
+	sdinfo = &vpfe_dev->cfg->sub_devs[subdev_index];
+	sd = vpfe_dev->sd[subdev_index];
+	route = &sdinfo->routes[inp_index];
+	if (route && sdinfo->can_route) {
+		input = route->input;
+		output = route->output;
+	}
+
+	if (sd)
+		ret = v4l2_subdev_call(sd, video, s_routing, input, output, 0);
+
+	if (ret) {
+		v4l2_err(&vpfe_dev->v4l2_dev,
+			"vpfe_doioctl:error in setting input in decoder\n");
+		ret = -EINVAL;
+		goto unlock_out;
+	}
+	vpfe_dev->current_subdev = sdinfo;
+	if (sd)
+		vpfe_dev->v4l2_dev.ctrl_handler = sd->ctrl_handler;
+	vpfe_dev->current_input = index;
+	vpfe_dev->std_index = 0;
+
+	/* set the bus/interface parameter for the sub device in ccdc */
+	ret = ccdc_dev->hw_ops.set_hw_if_params(&sdinfo->ccdc_if_params);
+	if (ret)
+		goto unlock_out;
+
+	/* set the default image parameters in the device */
+	ret = vpfe_config_image_format(vpfe_dev,
+				vpfe_standards[vpfe_dev->std_index].std_id);
+unlock_out:
+	mutex_unlock(&vpfe_dev->lock);
+	return ret;
+}
+
+static int vpfe_querystd(struct file *file, void *priv, v4l2_std_id *std_id)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+	struct vpfe_subdev_info *sdinfo;
+	int ret = 0;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_querystd\n");
+
+	ret = mutex_lock_interruptible(&vpfe_dev->lock);
+	sdinfo = vpfe_dev->current_subdev;
+	if (ret)
+		return ret;
+	/* Call querystd function of decoder device */
+	ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id,
+					 video, querystd, std_id);
+	mutex_unlock(&vpfe_dev->lock);
+	return ret;
+}
+
+static int vpfe_s_std(struct file *file, void *priv, v4l2_std_id std_id)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+	struct vpfe_subdev_info *sdinfo;
+	int ret = 0;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_std\n");
+
+	/* Call decoder driver function to set the standard */
+	ret = mutex_lock_interruptible(&vpfe_dev->lock);
+	if (ret)
+		return ret;
+
+	sdinfo = vpfe_dev->current_subdev;
+	/* If streaming is started, return device busy error */
+	if (vpfe_dev->started) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "streaming is started\n");
+		ret = -EBUSY;
+		goto unlock_out;
+	}
+
+	ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id,
+					 video, s_std, std_id);
+	if (ret < 0) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "Failed to set standard\n");
+		goto unlock_out;
+	}
+	ret = vpfe_config_image_format(vpfe_dev, std_id);
+
+unlock_out:
+	mutex_unlock(&vpfe_dev->lock);
+	return ret;
+}
+
+static int vpfe_g_std(struct file *file, void *priv, v4l2_std_id *std_id)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_std\n");
+
+	*std_id = vpfe_standards[vpfe_dev->std_index].std_id;
+	return 0;
+}
+/*
+ *  Videobuf operations
+ */
+static int vpfe_videobuf_setup(struct videobuf_queue *vq,
+				unsigned int *count,
+				unsigned int *size)
+{
+	struct vpfe_fh *fh = vq->priv_data;
+	struct vpfe_device *vpfe_dev = fh->vpfe_dev;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_buffer_setup\n");
+	*size = vpfe_dev->fmt.fmt.pix.sizeimage;
+	if (vpfe_dev->memory == V4L2_MEMORY_MMAP &&
+		vpfe_dev->fmt.fmt.pix.sizeimage > config_params.device_bufsize)
+		*size = config_params.device_bufsize;
+
+	if (*count < config_params.min_numbuffers)
+		*count = config_params.min_numbuffers;
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev,
+		"count=%d, size=%d\n", *count, *size);
+	return 0;
+}
+
+static int vpfe_videobuf_prepare(struct videobuf_queue *vq,
+				struct videobuf_buffer *vb,
+				enum v4l2_field field)
+{
+	struct vpfe_fh *fh = vq->priv_data;
+	struct vpfe_device *vpfe_dev = fh->vpfe_dev;
+	unsigned long addr;
+	int ret;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_buffer_prepare\n");
+
+	/* If buffer is not initialized, initialize it */
+	if (VIDEOBUF_NEEDS_INIT == vb->state) {
+		vb->width = vpfe_dev->fmt.fmt.pix.width;
+		vb->height = vpfe_dev->fmt.fmt.pix.height;
+		vb->size = vpfe_dev->fmt.fmt.pix.sizeimage;
+		vb->field = field;
+
+		ret = videobuf_iolock(vq, vb, NULL);
+		if (ret < 0)
+			return ret;
+
+		addr = videobuf_to_dma_contig(vb);
+		/* Make sure user addresses are aligned to 32 bytes */
+		if (!ALIGN(addr, 32))
+			return -EINVAL;
+
+		vb->state = VIDEOBUF_PREPARED;
+	}
+	return 0;
+}
+
+static void vpfe_videobuf_queue(struct videobuf_queue *vq,
+				struct videobuf_buffer *vb)
+{
+	/* Get the file handle object and device object */
+	struct vpfe_fh *fh = vq->priv_data;
+	struct vpfe_device *vpfe_dev = fh->vpfe_dev;
+	unsigned long flags;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_buffer_queue\n");
+
+	/* add the buffer to the DMA queue */
+	spin_lock_irqsave(&vpfe_dev->dma_queue_lock, flags);
+	list_add_tail(&vb->queue, &vpfe_dev->dma_queue);
+	spin_unlock_irqrestore(&vpfe_dev->dma_queue_lock, flags);
+
+	/* Change state of the buffer */
+	vb->state = VIDEOBUF_QUEUED;
+}
+
+static void vpfe_videobuf_release(struct videobuf_queue *vq,
+				  struct videobuf_buffer *vb)
+{
+	struct vpfe_fh *fh = vq->priv_data;
+	struct vpfe_device *vpfe_dev = fh->vpfe_dev;
+	unsigned long flags;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_videobuf_release\n");
+
+	/*
+	 * We need to flush the buffer from the dma queue since
+	 * they are de-allocated
+	 */
+	spin_lock_irqsave(&vpfe_dev->dma_queue_lock, flags);
+	INIT_LIST_HEAD(&vpfe_dev->dma_queue);
+	spin_unlock_irqrestore(&vpfe_dev->dma_queue_lock, flags);
+	videobuf_dma_contig_free(vq, vb);
+	vb->state = VIDEOBUF_NEEDS_INIT;
+}
+
+static struct videobuf_queue_ops vpfe_videobuf_qops = {
+	.buf_setup      = vpfe_videobuf_setup,
+	.buf_prepare    = vpfe_videobuf_prepare,
+	.buf_queue      = vpfe_videobuf_queue,
+	.buf_release    = vpfe_videobuf_release,
+};
+
+/*
+ * vpfe_reqbufs. currently support REQBUF only once opening
+ * the device.
+ */
+static int vpfe_reqbufs(struct file *file, void *priv,
+			struct v4l2_requestbuffers *req_buf)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+	struct vpfe_fh *fh = file->private_data;
+	int ret = 0;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_reqbufs\n");
+
+	if (V4L2_BUF_TYPE_VIDEO_CAPTURE != req_buf->type) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buffer type\n");
+		return -EINVAL;
+	}
+
+	ret = mutex_lock_interruptible(&vpfe_dev->lock);
+	if (ret)
+		return ret;
+
+	if (vpfe_dev->io_usrs != 0) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "Only one IO user allowed\n");
+		ret = -EBUSY;
+		goto unlock_out;
+	}
+
+	vpfe_dev->memory = req_buf->memory;
+	videobuf_queue_dma_contig_init(&vpfe_dev->buffer_queue,
+				&vpfe_videobuf_qops,
+				vpfe_dev->pdev,
+				&vpfe_dev->irqlock,
+				req_buf->type,
+				vpfe_dev->fmt.fmt.pix.field,
+				sizeof(struct videobuf_buffer),
+				fh, NULL);
+
+	fh->io_allowed = 1;
+	vpfe_dev->io_usrs = 1;
+	INIT_LIST_HEAD(&vpfe_dev->dma_queue);
+	ret = videobuf_reqbufs(&vpfe_dev->buffer_queue, req_buf);
+unlock_out:
+	mutex_unlock(&vpfe_dev->lock);
+	return ret;
+}
+
+static int vpfe_querybuf(struct file *file, void *priv,
+			 struct v4l2_buffer *buf)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_querybuf\n");
+
+	if (V4L2_BUF_TYPE_VIDEO_CAPTURE != buf->type) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n");
+		return  -EINVAL;
+	}
+
+	if (vpfe_dev->memory != V4L2_MEMORY_MMAP) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "Invalid memory\n");
+		return -EINVAL;
+	}
+	/* Call videobuf_querybuf to get information */
+	return videobuf_querybuf(&vpfe_dev->buffer_queue, buf);
+}
+
+static int vpfe_qbuf(struct file *file, void *priv,
+		     struct v4l2_buffer *p)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+	struct vpfe_fh *fh = file->private_data;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_qbuf\n");
+
+	if (V4L2_BUF_TYPE_VIDEO_CAPTURE != p->type) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * If this file handle is not allowed to do IO,
+	 * return error
+	 */
+	if (!fh->io_allowed) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "fh->io_allowed\n");
+		return -EACCES;
+	}
+	return videobuf_qbuf(&vpfe_dev->buffer_queue, p);
+}
+
+static int vpfe_dqbuf(struct file *file, void *priv,
+		      struct v4l2_buffer *buf)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_dqbuf\n");
+
+	if (V4L2_BUF_TYPE_VIDEO_CAPTURE != buf->type) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n");
+		return -EINVAL;
+	}
+	return videobuf_dqbuf(&vpfe_dev->buffer_queue,
+				      buf, file->f_flags & O_NONBLOCK);
+}
+
+/*
+ * vpfe_calculate_offsets : This function calculates buffers offset
+ * for top and bottom field
+ */
+static void vpfe_calculate_offsets(struct vpfe_device *vpfe_dev)
+{
+	struct v4l2_rect image_win;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_calculate_offsets\n");
+
+	ccdc_dev->hw_ops.get_image_window(&image_win);
+	vpfe_dev->field_off = image_win.height * image_win.width;
+}
+
+/* vpfe_start_ccdc_capture: start streaming in ccdc/isif */
+static void vpfe_start_ccdc_capture(struct vpfe_device *vpfe_dev)
+{
+	ccdc_dev->hw_ops.enable(1);
+	if (ccdc_dev->hw_ops.enable_out_to_sdram)
+		ccdc_dev->hw_ops.enable_out_to_sdram(1);
+	vpfe_dev->started = 1;
+}
+
+/*
+ * vpfe_streamon. Assume the DMA queue is not empty.
+ * application is expected to call QBUF before calling
+ * this ioctl. If not, driver returns error
+ */
+static int vpfe_streamon(struct file *file, void *priv,
+			 enum v4l2_buf_type buf_type)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+	struct vpfe_fh *fh = file->private_data;
+	struct vpfe_subdev_info *sdinfo;
+	unsigned long addr;
+	int ret = 0;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_streamon\n");
+
+	if (V4L2_BUF_TYPE_VIDEO_CAPTURE != buf_type) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n");
+		return -EINVAL;
+	}
+
+	/* If file handle is not allowed IO, return error */
+	if (!fh->io_allowed) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "fh->io_allowed\n");
+		return -EACCES;
+	}
+
+	sdinfo = vpfe_dev->current_subdev;
+	ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id,
+					video, s_stream, 1);
+
+	if (ret && (ret != -ENOIOCTLCMD)) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "stream on failed in subdev\n");
+		return -EINVAL;
+	}
+
+	/* If buffer queue is empty, return error */
+	if (list_empty(&vpfe_dev->buffer_queue.stream)) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "buffer queue is empty\n");
+		return -EIO;
+	}
+
+	/* Call videobuf_streamon to start streaming * in videobuf */
+	ret = videobuf_streamon(&vpfe_dev->buffer_queue);
+	if (ret)
+		return ret;
+
+
+	ret = mutex_lock_interruptible(&vpfe_dev->lock);
+	if (ret)
+		goto streamoff;
+	/* Get the next frame from the buffer queue */
+	vpfe_dev->next_frm = list_entry(vpfe_dev->dma_queue.next,
+					struct videobuf_buffer, queue);
+	vpfe_dev->cur_frm = vpfe_dev->next_frm;
+	/* Remove buffer from the buffer queue */
+	list_del(&vpfe_dev->cur_frm->queue);
+	/* Mark state of the current frame to active */
+	vpfe_dev->cur_frm->state = VIDEOBUF_ACTIVE;
+	/* Initialize field_id and started member */
+	vpfe_dev->field_id = 0;
+	addr = videobuf_to_dma_contig(vpfe_dev->cur_frm);
+
+	/* Calculate field offset */
+	vpfe_calculate_offsets(vpfe_dev);
+
+	if (vpfe_attach_irq(vpfe_dev) < 0) {
+		v4l2_err(&vpfe_dev->v4l2_dev,
+			 "Error in attaching interrupt handle\n");
+		ret = -EFAULT;
+		goto unlock_out;
+	}
+	if (ccdc_dev->hw_ops.configure() < 0) {
+		v4l2_err(&vpfe_dev->v4l2_dev,
+			 "Error in configuring ccdc\n");
+		ret = -EINVAL;
+		goto unlock_out;
+	}
+	ccdc_dev->hw_ops.setfbaddr((unsigned long)(addr));
+	vpfe_start_ccdc_capture(vpfe_dev);
+	mutex_unlock(&vpfe_dev->lock);
+	return ret;
+unlock_out:
+	mutex_unlock(&vpfe_dev->lock);
+streamoff:
+	ret = videobuf_streamoff(&vpfe_dev->buffer_queue);
+	return ret;
+}
+
+static int vpfe_streamoff(struct file *file, void *priv,
+			  enum v4l2_buf_type buf_type)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+	struct vpfe_fh *fh = file->private_data;
+	struct vpfe_subdev_info *sdinfo;
+	int ret = 0;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_streamoff\n");
+
+	if (V4L2_BUF_TYPE_VIDEO_CAPTURE != buf_type) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n");
+		return -EINVAL;
+	}
+
+	/* If io is allowed for this file handle, return error */
+	if (!fh->io_allowed) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "fh->io_allowed\n");
+		return -EACCES;
+	}
+
+	/* If streaming is not started, return error */
+	if (!vpfe_dev->started) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "device started\n");
+		return -EINVAL;
+	}
+
+	ret = mutex_lock_interruptible(&vpfe_dev->lock);
+	if (ret)
+		return ret;
+
+	vpfe_stop_ccdc_capture(vpfe_dev);
+	vpfe_detach_irq(vpfe_dev);
+
+	sdinfo = vpfe_dev->current_subdev;
+	ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id,
+					video, s_stream, 0);
+
+	if (ret && (ret != -ENOIOCTLCMD))
+		v4l2_err(&vpfe_dev->v4l2_dev, "stream off failed in subdev\n");
+	ret = videobuf_streamoff(&vpfe_dev->buffer_queue);
+	mutex_unlock(&vpfe_dev->lock);
+	return ret;
+}
+
+static int vpfe_cropcap(struct file *file, void *priv,
+			      struct v4l2_cropcap *crop)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_cropcap\n");
+
+	if (vpfe_dev->std_index >= ARRAY_SIZE(vpfe_standards))
+		return -EINVAL;
+
+	memset(crop, 0, sizeof(struct v4l2_cropcap));
+	crop->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	crop->bounds.width = crop->defrect.width =
+		vpfe_standards[vpfe_dev->std_index].width;
+	crop->bounds.height = crop->defrect.height =
+		vpfe_standards[vpfe_dev->std_index].height;
+	crop->pixelaspect = vpfe_standards[vpfe_dev->std_index].pixelaspect;
+	return 0;
+}
+
+static int vpfe_g_crop(struct file *file, void *priv,
+			     struct v4l2_crop *crop)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_crop\n");
+
+	crop->c = vpfe_dev->crop;
+	return 0;
+}
+
+static int vpfe_s_crop(struct file *file, void *priv,
+			     const struct v4l2_crop *crop)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+	struct v4l2_rect rect = crop->c;
+	int ret = 0;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_crop\n");
+
+	if (vpfe_dev->started) {
+		/* make sure streaming is not started */
+		v4l2_err(&vpfe_dev->v4l2_dev,
+			"Cannot change crop when streaming is ON\n");
+		return -EBUSY;
+	}
+
+	ret = mutex_lock_interruptible(&vpfe_dev->lock);
+	if (ret)
+		return ret;
+
+	if (rect.top < 0 || rect.left < 0) {
+		v4l2_err(&vpfe_dev->v4l2_dev,
+			"doesn't support negative values for top & left\n");
+		ret = -EINVAL;
+		goto unlock_out;
+	}
+
+	/* adjust the width to 16 pixel boundary */
+	rect.width = ((rect.width + 15) & ~0xf);
+
+	/* make sure parameters are valid */
+	if ((rect.left + rect.width >
+		vpfe_dev->std_info.active_pixels) ||
+	    (rect.top + rect.height >
+		vpfe_dev->std_info.active_lines)) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "Error in S_CROP params\n");
+		ret = -EINVAL;
+		goto unlock_out;
+	}
+	ccdc_dev->hw_ops.set_image_window(&rect);
+	vpfe_dev->fmt.fmt.pix.width = rect.width;
+	vpfe_dev->fmt.fmt.pix.height = rect.height;
+	vpfe_dev->fmt.fmt.pix.bytesperline =
+		ccdc_dev->hw_ops.get_line_length();
+	vpfe_dev->fmt.fmt.pix.sizeimage =
+		vpfe_dev->fmt.fmt.pix.bytesperline *
+		vpfe_dev->fmt.fmt.pix.height;
+	vpfe_dev->crop = rect;
+unlock_out:
+	mutex_unlock(&vpfe_dev->lock);
+	return ret;
+}
+
+
+static long vpfe_param_handler(struct file *file, void *priv,
+		bool valid_prio, unsigned int cmd, void *param)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+	int ret = 0;
+
+	v4l2_dbg(2, debug, &vpfe_dev->v4l2_dev, "vpfe_param_handler\n");
+
+	if (vpfe_dev->started) {
+		/* only allowed if streaming is not started */
+		v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev,
+			"device already started\n");
+		return -EBUSY;
+	}
+
+	ret = mutex_lock_interruptible(&vpfe_dev->lock);
+	if (ret)
+		return ret;
+
+	switch (cmd) {
+	case VPFE_CMD_S_CCDC_RAW_PARAMS:
+		v4l2_warn(&vpfe_dev->v4l2_dev,
+			  "VPFE_CMD_S_CCDC_RAW_PARAMS: experimental ioctl\n");
+		if (ccdc_dev->hw_ops.set_params) {
+			ret = ccdc_dev->hw_ops.set_params(param);
+			if (ret) {
+				v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev,
+					"Error setting parameters in CCDC\n");
+				goto unlock_out;
+			}
+			ret = vpfe_get_ccdc_image_format(vpfe_dev,
+							 &vpfe_dev->fmt);
+			if (ret < 0) {
+				v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev,
+					"Invalid image format at CCDC\n");
+				goto unlock_out;
+			}
+		} else {
+			ret = -EINVAL;
+			v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev,
+				"VPFE_CMD_S_CCDC_RAW_PARAMS not supported\n");
+		}
+		break;
+	default:
+		ret = -ENOTTY;
+	}
+unlock_out:
+	mutex_unlock(&vpfe_dev->lock);
+	return ret;
+}
+
+
+/* vpfe capture ioctl operations */
+static const struct v4l2_ioctl_ops vpfe_ioctl_ops = {
+	.vidioc_querycap	 = vpfe_querycap,
+	.vidioc_g_fmt_vid_cap    = vpfe_g_fmt_vid_cap,
+	.vidioc_enum_fmt_vid_cap = vpfe_enum_fmt_vid_cap,
+	.vidioc_s_fmt_vid_cap    = vpfe_s_fmt_vid_cap,
+	.vidioc_try_fmt_vid_cap  = vpfe_try_fmt_vid_cap,
+	.vidioc_enum_input	 = vpfe_enum_input,
+	.vidioc_g_input		 = vpfe_g_input,
+	.vidioc_s_input		 = vpfe_s_input,
+	.vidioc_querystd	 = vpfe_querystd,
+	.vidioc_s_std		 = vpfe_s_std,
+	.vidioc_g_std		 = vpfe_g_std,
+	.vidioc_reqbufs		 = vpfe_reqbufs,
+	.vidioc_querybuf	 = vpfe_querybuf,
+	.vidioc_qbuf		 = vpfe_qbuf,
+	.vidioc_dqbuf		 = vpfe_dqbuf,
+	.vidioc_streamon	 = vpfe_streamon,
+	.vidioc_streamoff	 = vpfe_streamoff,
+	.vidioc_cropcap		 = vpfe_cropcap,
+	.vidioc_g_crop		 = vpfe_g_crop,
+	.vidioc_s_crop		 = vpfe_s_crop,
+	.vidioc_default		 = vpfe_param_handler,
+};
+
+static struct vpfe_device *vpfe_initialize(void)
+{
+	struct vpfe_device *vpfe_dev;
+
+	/* Default number of buffers should be 3 */
+	if ((numbuffers > 0) &&
+	    (numbuffers < config_params.min_numbuffers))
+		numbuffers = config_params.min_numbuffers;
+
+	/*
+	 * Set buffer size to min buffers size if invalid buffer size is
+	 * given
+	 */
+	if (bufsize < config_params.min_bufsize)
+		bufsize = config_params.min_bufsize;
+
+	config_params.numbuffers = numbuffers;
+
+	if (numbuffers)
+		config_params.device_bufsize = bufsize;
+
+	/* Allocate memory for device objects */
+	vpfe_dev = kzalloc(sizeof(*vpfe_dev), GFP_KERNEL);
+
+	return vpfe_dev;
+}
+
+/*
+ * vpfe_probe : This function creates device entries by register
+ * itself to the V4L2 driver and initializes fields of each
+ * device objects
+ */
+static int vpfe_probe(struct platform_device *pdev)
+{
+	struct vpfe_subdev_info *sdinfo;
+	struct vpfe_config *vpfe_cfg;
+	struct resource *res1;
+	struct vpfe_device *vpfe_dev;
+	struct i2c_adapter *i2c_adap;
+	struct video_device *vfd;
+	int ret = -ENOMEM, i, j;
+	int num_subdevs = 0;
+
+	/* Get the pointer to the device object */
+	vpfe_dev = vpfe_initialize();
+
+	if (!vpfe_dev) {
+		v4l2_err(pdev->dev.driver,
+			"Failed to allocate memory for vpfe_dev\n");
+		return ret;
+	}
+
+	vpfe_dev->pdev = &pdev->dev;
+
+	if (NULL == pdev->dev.platform_data) {
+		v4l2_err(pdev->dev.driver, "Unable to get vpfe config\n");
+		ret = -ENODEV;
+		goto probe_free_dev_mem;
+	}
+
+	vpfe_cfg = pdev->dev.platform_data;
+	vpfe_dev->cfg = vpfe_cfg;
+	if (NULL == vpfe_cfg->ccdc ||
+	    NULL == vpfe_cfg->card_name ||
+	    NULL == vpfe_cfg->sub_devs) {
+		v4l2_err(pdev->dev.driver, "null ptr in vpfe_cfg\n");
+		ret = -ENOENT;
+		goto probe_free_dev_mem;
+	}
+
+	/* Allocate memory for ccdc configuration */
+	ccdc_cfg = kmalloc(sizeof(struct ccdc_config), GFP_KERNEL);
+	if (NULL == ccdc_cfg) {
+		v4l2_err(pdev->dev.driver,
+			 "Memory allocation failed for ccdc_cfg\n");
+		goto probe_free_dev_mem;
+	}
+
+	mutex_lock(&ccdc_lock);
+
+	strncpy(ccdc_cfg->name, vpfe_cfg->ccdc, 32);
+	/* Get VINT0 irq resource */
+	res1 = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!res1) {
+		v4l2_err(pdev->dev.driver,
+			 "Unable to get interrupt for VINT0\n");
+		ret = -ENODEV;
+		goto probe_free_ccdc_cfg_mem;
+	}
+	vpfe_dev->ccdc_irq0 = res1->start;
+
+	/* Get VINT1 irq resource */
+	res1 = platform_get_resource(pdev, IORESOURCE_IRQ, 1);
+	if (!res1) {
+		v4l2_err(pdev->dev.driver,
+			 "Unable to get interrupt for VINT1\n");
+		ret = -ENODEV;
+		goto probe_free_ccdc_cfg_mem;
+	}
+	vpfe_dev->ccdc_irq1 = res1->start;
+
+	ret = request_irq(vpfe_dev->ccdc_irq0, vpfe_isr, 0,
+			  "vpfe_capture0", vpfe_dev);
+
+	if (0 != ret) {
+		v4l2_err(pdev->dev.driver, "Unable to request interrupt\n");
+		goto probe_free_ccdc_cfg_mem;
+	}
+
+	vfd = &vpfe_dev->video_dev;
+	/* Initialize field of video device */
+	vfd->release		= video_device_release_empty;
+	vfd->fops		= &vpfe_fops;
+	vfd->ioctl_ops		= &vpfe_ioctl_ops;
+	vfd->tvnorms		= 0;
+	vfd->v4l2_dev 		= &vpfe_dev->v4l2_dev;
+	snprintf(vfd->name, sizeof(vfd->name),
+		 "%s_V%d.%d.%d",
+		 CAPTURE_DRV_NAME,
+		 (VPFE_CAPTURE_VERSION_CODE >> 16) & 0xff,
+		 (VPFE_CAPTURE_VERSION_CODE >> 8) & 0xff,
+		 (VPFE_CAPTURE_VERSION_CODE) & 0xff);
+
+	ret = v4l2_device_register(&pdev->dev, &vpfe_dev->v4l2_dev);
+	if (ret) {
+		v4l2_err(pdev->dev.driver,
+			"Unable to register v4l2 device.\n");
+		goto probe_out_release_irq;
+	}
+	v4l2_info(&vpfe_dev->v4l2_dev, "v4l2 device registered\n");
+	spin_lock_init(&vpfe_dev->irqlock);
+	spin_lock_init(&vpfe_dev->dma_queue_lock);
+	mutex_init(&vpfe_dev->lock);
+
+	/* Initialize field of the device objects */
+	vpfe_dev->numbuffers = config_params.numbuffers;
+
+	/* register video device */
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev,
+		"trying to register vpfe device.\n");
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev,
+		"video_dev=%p\n", &vpfe_dev->video_dev);
+	vpfe_dev->fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	ret = video_register_device(&vpfe_dev->video_dev,
+				    VFL_TYPE_GRABBER, -1);
+
+	if (ret) {
+		v4l2_err(pdev->dev.driver,
+			"Unable to register video device.\n");
+		goto probe_out_v4l2_unregister;
+	}
+
+	v4l2_info(&vpfe_dev->v4l2_dev, "video device registered\n");
+	/* set the driver data in platform device */
+	platform_set_drvdata(pdev, vpfe_dev);
+	/* set driver private data */
+	video_set_drvdata(&vpfe_dev->video_dev, vpfe_dev);
+	i2c_adap = i2c_get_adapter(vpfe_cfg->i2c_adapter_id);
+	num_subdevs = vpfe_cfg->num_subdevs;
+	vpfe_dev->sd = kmalloc(sizeof(struct v4l2_subdev *) * num_subdevs,
+				GFP_KERNEL);
+	if (NULL == vpfe_dev->sd) {
+		v4l2_err(&vpfe_dev->v4l2_dev,
+			"unable to allocate memory for subdevice pointers\n");
+		ret = -ENOMEM;
+		goto probe_out_video_unregister;
+	}
+
+	for (i = 0; i < num_subdevs; i++) {
+		struct v4l2_input *inps;
+
+		sdinfo = &vpfe_cfg->sub_devs[i];
+
+		/* Load up the subdevice */
+		vpfe_dev->sd[i] =
+			v4l2_i2c_new_subdev_board(&vpfe_dev->v4l2_dev,
+						  i2c_adap,
+						  &sdinfo->board_info,
+						  NULL);
+		if (vpfe_dev->sd[i]) {
+			v4l2_info(&vpfe_dev->v4l2_dev,
+				  "v4l2 sub device %s registered\n",
+				  sdinfo->name);
+			vpfe_dev->sd[i]->grp_id = sdinfo->grp_id;
+			/* update tvnorms from the sub devices */
+			for (j = 0; j < sdinfo->num_inputs; j++) {
+				inps = &sdinfo->inputs[j];
+				vfd->tvnorms |= inps->std;
+			}
+		} else {
+			v4l2_info(&vpfe_dev->v4l2_dev,
+				  "v4l2 sub device %s register fails\n",
+				  sdinfo->name);
+			goto probe_sd_out;
+		}
+	}
+
+	/* set first sub device as current one */
+	vpfe_dev->current_subdev = &vpfe_cfg->sub_devs[0];
+	vpfe_dev->v4l2_dev.ctrl_handler = vpfe_dev->sd[0]->ctrl_handler;
+
+	/* We have at least one sub device to work with */
+	mutex_unlock(&ccdc_lock);
+	return 0;
+
+probe_sd_out:
+	kfree(vpfe_dev->sd);
+probe_out_video_unregister:
+	video_unregister_device(&vpfe_dev->video_dev);
+probe_out_v4l2_unregister:
+	v4l2_device_unregister(&vpfe_dev->v4l2_dev);
+probe_out_release_irq:
+	free_irq(vpfe_dev->ccdc_irq0, vpfe_dev);
+probe_free_ccdc_cfg_mem:
+	kfree(ccdc_cfg);
+	mutex_unlock(&ccdc_lock);
+probe_free_dev_mem:
+	kfree(vpfe_dev);
+	return ret;
+}
+
+/*
+ * vpfe_remove : It un-register device from V4L2 driver
+ */
+static int vpfe_remove(struct platform_device *pdev)
+{
+	struct vpfe_device *vpfe_dev = platform_get_drvdata(pdev);
+
+	v4l2_info(pdev->dev.driver, "vpfe_remove\n");
+
+	free_irq(vpfe_dev->ccdc_irq0, vpfe_dev);
+	kfree(vpfe_dev->sd);
+	v4l2_device_unregister(&vpfe_dev->v4l2_dev);
+	video_unregister_device(&vpfe_dev->video_dev);
+	kfree(vpfe_dev);
+	kfree(ccdc_cfg);
+	return 0;
+}
+
+static int vpfe_suspend(struct device *dev)
+{
+	return 0;
+}
+
+static int vpfe_resume(struct device *dev)
+{
+	return 0;
+}
+
+static const struct dev_pm_ops vpfe_dev_pm_ops = {
+	.suspend = vpfe_suspend,
+	.resume = vpfe_resume,
+};
+
+static struct platform_driver vpfe_driver = {
+	.driver = {
+		.name = CAPTURE_DRV_NAME,
+		.pm = &vpfe_dev_pm_ops,
+	},
+	.probe = vpfe_probe,
+	.remove = vpfe_remove,
+};
+
+module_platform_driver(vpfe_driver);
diff --git a/drivers/media/platform/davinci/vpif.c b/drivers/media/platform/davinci/vpif.c
new file mode 100644
index 000000000..0380cf2e5
--- /dev/null
+++ b/drivers/media/platform/davinci/vpif.c
@@ -0,0 +1,487 @@
+/*
+ * vpif - Video Port Interface driver
+ * VPIF is a receiver and transmitter for video data. It has two channels(0, 1)
+ * that receiveing video byte stream and two channels(2, 3) for video output.
+ * The hardware supports SDTV, HDTV formats, raw data capture.
+ * Currently, the driver supports NTSC and PAL standards.
+ *
+ * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed .as is. WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/spinlock.h>
+#include <linux/v4l2-dv-timings.h>
+
+#include "vpif.h"
+
+MODULE_DESCRIPTION("TI DaVinci Video Port Interface driver");
+MODULE_LICENSE("GPL");
+
+#define VPIF_CH0_MAX_MODES	22
+#define VPIF_CH1_MAX_MODES	2
+#define VPIF_CH2_MAX_MODES	15
+#define VPIF_CH3_MAX_MODES	2
+
+spinlock_t vpif_lock;
+EXPORT_SYMBOL_GPL(vpif_lock);
+
+void __iomem *vpif_base;
+EXPORT_SYMBOL_GPL(vpif_base);
+
+/**
+ * vpif_ch_params: video standard configuration parameters for vpif
+ * The table must include all presets from supported subdevices.
+ */
+const struct vpif_channel_config_params vpif_ch_params[] = {
+	/* HDTV formats */
+	{
+		.name = "480p59_94",
+		.width = 720,
+		.height = 480,
+		.frm_fmt = 1,
+		.ycmux_mode = 0,
+		.eav2sav = 138-8,
+		.sav2eav = 720,
+		.l1 = 1,
+		.l3 = 43,
+		.l5 = 523,
+		.vsize = 525,
+		.capture_format = 0,
+		.vbi_supported = 0,
+		.hd_sd = 1,
+		.dv_timings = V4L2_DV_BT_CEA_720X480P59_94,
+	},
+	{
+		.name = "576p50",
+		.width = 720,
+		.height = 576,
+		.frm_fmt = 1,
+		.ycmux_mode = 0,
+		.eav2sav = 144-8,
+		.sav2eav = 720,
+		.l1 = 1,
+		.l3 = 45,
+		.l5 = 621,
+		.vsize = 625,
+		.capture_format = 0,
+		.vbi_supported = 0,
+		.hd_sd = 1,
+		.dv_timings = V4L2_DV_BT_CEA_720X576P50,
+	},
+	{
+		.name = "720p50",
+		.width = 1280,
+		.height = 720,
+		.frm_fmt = 1,
+		.ycmux_mode = 0,
+		.eav2sav = 700-8,
+		.sav2eav = 1280,
+		.l1 = 1,
+		.l3 = 26,
+		.l5 = 746,
+		.vsize = 750,
+		.capture_format = 0,
+		.vbi_supported = 0,
+		.hd_sd = 1,
+		.dv_timings = V4L2_DV_BT_CEA_1280X720P50,
+	},
+	{
+		.name = "720p60",
+		.width = 1280,
+		.height = 720,
+		.frm_fmt = 1,
+		.ycmux_mode = 0,
+		.eav2sav = 370 - 8,
+		.sav2eav = 1280,
+		.l1 = 1,
+		.l3 = 26,
+		.l5 = 746,
+		.vsize = 750,
+		.capture_format = 0,
+		.vbi_supported = 0,
+		.hd_sd = 1,
+		.dv_timings = V4L2_DV_BT_CEA_1280X720P60,
+	},
+	{
+		.name = "1080I50",
+		.width = 1920,
+		.height = 1080,
+		.frm_fmt = 0,
+		.ycmux_mode = 0,
+		.eav2sav = 720 - 8,
+		.sav2eav = 1920,
+		.l1 = 1,
+		.l3 = 21,
+		.l5 = 561,
+		.l7 = 563,
+		.l9 = 584,
+		.l11 = 1124,
+		.vsize = 1125,
+		.capture_format = 0,
+		.vbi_supported = 0,
+		.hd_sd = 1,
+		.dv_timings = V4L2_DV_BT_CEA_1920X1080I50,
+	},
+	{
+		.name = "1080I60",
+		.width = 1920,
+		.height = 1080,
+		.frm_fmt = 0,
+		.ycmux_mode = 0,
+		.eav2sav = 280 - 8,
+		.sav2eav = 1920,
+		.l1 = 1,
+		.l3 = 21,
+		.l5 = 561,
+		.l7 = 563,
+		.l9 = 584,
+		.l11 = 1124,
+		.vsize = 1125,
+		.capture_format = 0,
+		.vbi_supported = 0,
+		.hd_sd = 1,
+		.dv_timings = V4L2_DV_BT_CEA_1920X1080I60,
+	},
+	{
+		.name = "1080p60",
+		.width = 1920,
+		.height = 1080,
+		.frm_fmt = 1,
+		.ycmux_mode = 0,
+		.eav2sav = 280 - 8,
+		.sav2eav = 1920,
+		.l1 = 1,
+		.l3 = 42,
+		.l5 = 1122,
+		.vsize = 1125,
+		.capture_format = 0,
+		.vbi_supported = 0,
+		.hd_sd = 1,
+		.dv_timings = V4L2_DV_BT_CEA_1920X1080P60,
+	},
+
+	/* SDTV formats */
+	{
+		.name = "NTSC_M",
+		.width = 720,
+		.height = 480,
+		.frm_fmt = 0,
+		.ycmux_mode = 1,
+		.eav2sav = 268,
+		.sav2eav = 1440,
+		.l1 = 1,
+		.l3 = 23,
+		.l5 = 263,
+		.l7 = 266,
+		.l9 = 286,
+		.l11 = 525,
+		.vsize = 525,
+		.capture_format = 0,
+		.vbi_supported = 1,
+		.hd_sd = 0,
+		.stdid = V4L2_STD_525_60,
+	},
+	{
+		.name = "PAL_BDGHIK",
+		.width = 720,
+		.height = 576,
+		.frm_fmt = 0,
+		.ycmux_mode = 1,
+		.eav2sav = 280,
+		.sav2eav = 1440,
+		.l1 = 1,
+		.l3 = 23,
+		.l5 = 311,
+		.l7 = 313,
+		.l9 = 336,
+		.l11 = 624,
+		.vsize = 625,
+		.capture_format = 0,
+		.vbi_supported = 1,
+		.hd_sd = 0,
+		.stdid = V4L2_STD_625_50,
+	},
+};
+EXPORT_SYMBOL_GPL(vpif_ch_params);
+
+const unsigned int vpif_ch_params_count = ARRAY_SIZE(vpif_ch_params);
+EXPORT_SYMBOL_GPL(vpif_ch_params_count);
+
+static inline void vpif_wr_bit(u32 reg, u32 bit, u32 val)
+{
+	if (val)
+		vpif_set_bit(reg, bit);
+	else
+		vpif_clr_bit(reg, bit);
+}
+
+/* This structure is used to keep track of VPIF size register's offsets */
+struct vpif_registers {
+	u32 h_cfg, v_cfg_00, v_cfg_01, v_cfg_02, v_cfg, ch_ctrl;
+	u32 line_offset, vanc0_strt, vanc0_size, vanc1_strt;
+	u32 vanc1_size, width_mask, len_mask;
+	u8 max_modes;
+};
+
+static const struct vpif_registers vpifregs[VPIF_NUM_CHANNELS] = {
+	/* Channel0 */
+	{
+		VPIF_CH0_H_CFG, VPIF_CH0_V_CFG_00, VPIF_CH0_V_CFG_01,
+		VPIF_CH0_V_CFG_02, VPIF_CH0_V_CFG_03, VPIF_CH0_CTRL,
+		VPIF_CH0_IMG_ADD_OFST, 0, 0, 0, 0, 0x1FFF, 0xFFF,
+		VPIF_CH0_MAX_MODES,
+	},
+	/* Channel1 */
+	{
+		VPIF_CH1_H_CFG, VPIF_CH1_V_CFG_00, VPIF_CH1_V_CFG_01,
+		VPIF_CH1_V_CFG_02, VPIF_CH1_V_CFG_03, VPIF_CH1_CTRL,
+		VPIF_CH1_IMG_ADD_OFST, 0, 0, 0, 0, 0x1FFF, 0xFFF,
+		VPIF_CH1_MAX_MODES,
+	},
+	/* Channel2 */
+	{
+		VPIF_CH2_H_CFG, VPIF_CH2_V_CFG_00, VPIF_CH2_V_CFG_01,
+		VPIF_CH2_V_CFG_02, VPIF_CH2_V_CFG_03, VPIF_CH2_CTRL,
+		VPIF_CH2_IMG_ADD_OFST, VPIF_CH2_VANC0_STRT, VPIF_CH2_VANC0_SIZE,
+		VPIF_CH2_VANC1_STRT, VPIF_CH2_VANC1_SIZE, 0x7FF, 0x7FF,
+		VPIF_CH2_MAX_MODES
+	},
+	/* Channel3 */
+	{
+		VPIF_CH3_H_CFG, VPIF_CH3_V_CFG_00, VPIF_CH3_V_CFG_01,
+		VPIF_CH3_V_CFG_02, VPIF_CH3_V_CFG_03, VPIF_CH3_CTRL,
+		VPIF_CH3_IMG_ADD_OFST, VPIF_CH3_VANC0_STRT, VPIF_CH3_VANC0_SIZE,
+		VPIF_CH3_VANC1_STRT, VPIF_CH3_VANC1_SIZE, 0x7FF, 0x7FF,
+		VPIF_CH3_MAX_MODES
+	},
+};
+
+/* vpif_set_mode_info:
+ * This function is used to set horizontal and vertical config parameters
+ * As per the standard in the channel, configure the values of L1, L3,
+ * L5, L7  L9, L11 in VPIF Register , also write width and height
+ */
+static void vpif_set_mode_info(const struct vpif_channel_config_params *config,
+				u8 channel_id, u8 config_channel_id)
+{
+	u32 value;
+
+	value = (config->eav2sav & vpifregs[config_channel_id].width_mask);
+	value <<= VPIF_CH_LEN_SHIFT;
+	value |= (config->sav2eav & vpifregs[config_channel_id].width_mask);
+	regw(value, vpifregs[channel_id].h_cfg);
+
+	value = (config->l1 & vpifregs[config_channel_id].len_mask);
+	value <<= VPIF_CH_LEN_SHIFT;
+	value |= (config->l3 & vpifregs[config_channel_id].len_mask);
+	regw(value, vpifregs[channel_id].v_cfg_00);
+
+	value = (config->l5 & vpifregs[config_channel_id].len_mask);
+	value <<= VPIF_CH_LEN_SHIFT;
+	value |= (config->l7 & vpifregs[config_channel_id].len_mask);
+	regw(value, vpifregs[channel_id].v_cfg_01);
+
+	value = (config->l9 & vpifregs[config_channel_id].len_mask);
+	value <<= VPIF_CH_LEN_SHIFT;
+	value |= (config->l11 & vpifregs[config_channel_id].len_mask);
+	regw(value, vpifregs[channel_id].v_cfg_02);
+
+	value = (config->vsize & vpifregs[config_channel_id].len_mask);
+	regw(value, vpifregs[channel_id].v_cfg);
+}
+
+/* config_vpif_params
+ * Function to set the parameters of a channel
+ * Mainly modifies the channel ciontrol register
+ * It sets frame format, yc mux mode
+ */
+static void config_vpif_params(struct vpif_params *vpifparams,
+				u8 channel_id, u8 found)
+{
+	const struct vpif_channel_config_params *config = &vpifparams->std_info;
+	u32 value, ch_nip, reg;
+	u8 start, end;
+	int i;
+
+	start = channel_id;
+	end = channel_id + found;
+
+	for (i = start; i < end; i++) {
+		reg = vpifregs[i].ch_ctrl;
+		if (channel_id < 2)
+			ch_nip = VPIF_CAPTURE_CH_NIP;
+		else
+			ch_nip = VPIF_DISPLAY_CH_NIP;
+
+		vpif_wr_bit(reg, ch_nip, config->frm_fmt);
+		vpif_wr_bit(reg, VPIF_CH_YC_MUX_BIT, config->ycmux_mode);
+		vpif_wr_bit(reg, VPIF_CH_INPUT_FIELD_FRAME_BIT,
+					vpifparams->video_params.storage_mode);
+
+		/* Set raster scanning SDR Format */
+		vpif_clr_bit(reg, VPIF_CH_SDR_FMT_BIT);
+		vpif_wr_bit(reg, VPIF_CH_DATA_MODE_BIT, config->capture_format);
+
+		if (channel_id > 1)	/* Set the Pixel enable bit */
+			vpif_set_bit(reg, VPIF_DISPLAY_PIX_EN_BIT);
+		else if (config->capture_format) {
+			/* Set the polarity of various pins */
+			vpif_wr_bit(reg, VPIF_CH_FID_POLARITY_BIT,
+					vpifparams->iface.fid_pol);
+			vpif_wr_bit(reg, VPIF_CH_V_VALID_POLARITY_BIT,
+					vpifparams->iface.vd_pol);
+			vpif_wr_bit(reg, VPIF_CH_H_VALID_POLARITY_BIT,
+					vpifparams->iface.hd_pol);
+
+			value = regr(reg);
+			/* Set data width */
+			value &= ~(0x3u <<
+					VPIF_CH_DATA_WIDTH_BIT);
+			value |= ((vpifparams->params.data_sz) <<
+						     VPIF_CH_DATA_WIDTH_BIT);
+			regw(value, reg);
+		}
+
+		/* Write the pitch in the driver */
+		regw((vpifparams->video_params.hpitch),
+						vpifregs[i].line_offset);
+	}
+}
+
+/* vpif_set_video_params
+ * This function is used to set video parameters in VPIF register
+ */
+int vpif_set_video_params(struct vpif_params *vpifparams, u8 channel_id)
+{
+	const struct vpif_channel_config_params *config = &vpifparams->std_info;
+	int found = 1;
+
+	vpif_set_mode_info(config, channel_id, channel_id);
+	if (!config->ycmux_mode) {
+		/* YC are on separate channels (HDTV formats) */
+		vpif_set_mode_info(config, channel_id + 1, channel_id);
+		found = 2;
+	}
+
+	config_vpif_params(vpifparams, channel_id, found);
+
+	regw(0x80, VPIF_REQ_SIZE);
+	regw(0x01, VPIF_EMULATION_CTRL);
+
+	return found;
+}
+EXPORT_SYMBOL(vpif_set_video_params);
+
+void vpif_set_vbi_display_params(struct vpif_vbi_params *vbiparams,
+				u8 channel_id)
+{
+	u32 value;
+
+	value = 0x3F8 & (vbiparams->hstart0);
+	value |= 0x3FFFFFF & ((vbiparams->vstart0) << 16);
+	regw(value, vpifregs[channel_id].vanc0_strt);
+
+	value = 0x3F8 & (vbiparams->hstart1);
+	value |= 0x3FFFFFF & ((vbiparams->vstart1) << 16);
+	regw(value, vpifregs[channel_id].vanc1_strt);
+
+	value = 0x3F8 & (vbiparams->hsize0);
+	value |= 0x3FFFFFF & ((vbiparams->vsize0) << 16);
+	regw(value, vpifregs[channel_id].vanc0_size);
+
+	value = 0x3F8 & (vbiparams->hsize1);
+	value |= 0x3FFFFFF & ((vbiparams->vsize1) << 16);
+	regw(value, vpifregs[channel_id].vanc1_size);
+
+}
+EXPORT_SYMBOL(vpif_set_vbi_display_params);
+
+int vpif_channel_getfid(u8 channel_id)
+{
+	return (regr(vpifregs[channel_id].ch_ctrl) & VPIF_CH_FID_MASK)
+					>> VPIF_CH_FID_SHIFT;
+}
+EXPORT_SYMBOL(vpif_channel_getfid);
+
+static int vpif_probe(struct platform_device *pdev)
+{
+	static struct resource	*res;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	vpif_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(vpif_base))
+		return PTR_ERR(vpif_base);
+
+	pm_runtime_enable(&pdev->dev);
+	pm_runtime_get(&pdev->dev);
+
+	spin_lock_init(&vpif_lock);
+	dev_info(&pdev->dev, "vpif probe success\n");
+	return 0;
+}
+
+static int vpif_remove(struct platform_device *pdev)
+{
+	pm_runtime_disable(&pdev->dev);
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int vpif_suspend(struct device *dev)
+{
+	pm_runtime_put(dev);
+	return 0;
+}
+
+static int vpif_resume(struct device *dev)
+{
+	pm_runtime_get(dev);
+	return 0;
+}
+
+static const struct dev_pm_ops vpif_pm = {
+	.suspend        = vpif_suspend,
+	.resume         = vpif_resume,
+};
+
+#define vpif_pm_ops (&vpif_pm)
+#else
+#define vpif_pm_ops NULL
+#endif
+
+static struct platform_driver vpif_driver = {
+	.driver = {
+		.name	= "vpif",
+		.pm	= vpif_pm_ops,
+	},
+	.remove = vpif_remove,
+	.probe = vpif_probe,
+};
+
+static void vpif_exit(void)
+{
+	platform_driver_unregister(&vpif_driver);
+}
+
+static int __init vpif_init(void)
+{
+	return platform_driver_register(&vpif_driver);
+}
+subsys_initcall(vpif_init);
+module_exit(vpif_exit);
+
diff --git a/drivers/media/platform/davinci/vpif.h b/drivers/media/platform/davinci/vpif.h
new file mode 100644
index 000000000..9956e6788
--- /dev/null
+++ b/drivers/media/platform/davinci/vpif.h
@@ -0,0 +1,688 @@
+/*
+ * VPIF header file
+ *
+ * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed .as is. WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef VPIF_H
+#define VPIF_H
+
+#include <linux/io.h>
+#include <linux/videodev2.h>
+#include <media/davinci/vpif_types.h>
+
+/* Maximum channel allowed */
+#define VPIF_NUM_CHANNELS		(4)
+#define VPIF_CAPTURE_NUM_CHANNELS	(2)
+#define VPIF_DISPLAY_NUM_CHANNELS	(2)
+
+/* Macros to read/write registers */
+extern void __iomem *vpif_base;
+extern spinlock_t vpif_lock;
+
+#define regr(reg)               readl((reg) + vpif_base)
+#define regw(value, reg)        writel(value, (reg + vpif_base))
+
+/* Register Address Offsets */
+#define VPIF_PID			(0x0000)
+#define VPIF_CH0_CTRL			(0x0004)
+#define VPIF_CH1_CTRL			(0x0008)
+#define VPIF_CH2_CTRL			(0x000C)
+#define VPIF_CH3_CTRL			(0x0010)
+
+#define VPIF_INTEN			(0x0020)
+#define VPIF_INTEN_SET			(0x0024)
+#define VPIF_INTEN_CLR			(0x0028)
+#define VPIF_STATUS			(0x002C)
+#define VPIF_STATUS_CLR			(0x0030)
+#define VPIF_EMULATION_CTRL		(0x0034)
+#define VPIF_REQ_SIZE			(0x0038)
+
+#define VPIF_CH0_TOP_STRT_ADD_LUMA	(0x0040)
+#define VPIF_CH0_BTM_STRT_ADD_LUMA	(0x0044)
+#define VPIF_CH0_TOP_STRT_ADD_CHROMA	(0x0048)
+#define VPIF_CH0_BTM_STRT_ADD_CHROMA	(0x004c)
+#define VPIF_CH0_TOP_STRT_ADD_HANC	(0x0050)
+#define VPIF_CH0_BTM_STRT_ADD_HANC	(0x0054)
+#define VPIF_CH0_TOP_STRT_ADD_VANC	(0x0058)
+#define VPIF_CH0_BTM_STRT_ADD_VANC	(0x005c)
+#define VPIF_CH0_SP_CFG			(0x0060)
+#define VPIF_CH0_IMG_ADD_OFST		(0x0064)
+#define VPIF_CH0_HANC_ADD_OFST		(0x0068)
+#define VPIF_CH0_H_CFG			(0x006c)
+#define VPIF_CH0_V_CFG_00		(0x0070)
+#define VPIF_CH0_V_CFG_01		(0x0074)
+#define VPIF_CH0_V_CFG_02		(0x0078)
+#define VPIF_CH0_V_CFG_03		(0x007c)
+
+#define VPIF_CH1_TOP_STRT_ADD_LUMA	(0x0080)
+#define VPIF_CH1_BTM_STRT_ADD_LUMA	(0x0084)
+#define VPIF_CH1_TOP_STRT_ADD_CHROMA	(0x0088)
+#define VPIF_CH1_BTM_STRT_ADD_CHROMA	(0x008c)
+#define VPIF_CH1_TOP_STRT_ADD_HANC	(0x0090)
+#define VPIF_CH1_BTM_STRT_ADD_HANC	(0x0094)
+#define VPIF_CH1_TOP_STRT_ADD_VANC	(0x0098)
+#define VPIF_CH1_BTM_STRT_ADD_VANC	(0x009c)
+#define VPIF_CH1_SP_CFG			(0x00a0)
+#define VPIF_CH1_IMG_ADD_OFST		(0x00a4)
+#define VPIF_CH1_HANC_ADD_OFST		(0x00a8)
+#define VPIF_CH1_H_CFG			(0x00ac)
+#define VPIF_CH1_V_CFG_00		(0x00b0)
+#define VPIF_CH1_V_CFG_01		(0x00b4)
+#define VPIF_CH1_V_CFG_02		(0x00b8)
+#define VPIF_CH1_V_CFG_03		(0x00bc)
+
+#define VPIF_CH2_TOP_STRT_ADD_LUMA	(0x00c0)
+#define VPIF_CH2_BTM_STRT_ADD_LUMA	(0x00c4)
+#define VPIF_CH2_TOP_STRT_ADD_CHROMA	(0x00c8)
+#define VPIF_CH2_BTM_STRT_ADD_CHROMA	(0x00cc)
+#define VPIF_CH2_TOP_STRT_ADD_HANC	(0x00d0)
+#define VPIF_CH2_BTM_STRT_ADD_HANC	(0x00d4)
+#define VPIF_CH2_TOP_STRT_ADD_VANC	(0x00d8)
+#define VPIF_CH2_BTM_STRT_ADD_VANC	(0x00dc)
+#define VPIF_CH2_SP_CFG			(0x00e0)
+#define VPIF_CH2_IMG_ADD_OFST		(0x00e4)
+#define VPIF_CH2_HANC_ADD_OFST		(0x00e8)
+#define VPIF_CH2_H_CFG			(0x00ec)
+#define VPIF_CH2_V_CFG_00		(0x00f0)
+#define VPIF_CH2_V_CFG_01		(0x00f4)
+#define VPIF_CH2_V_CFG_02		(0x00f8)
+#define VPIF_CH2_V_CFG_03		(0x00fc)
+#define VPIF_CH2_HANC0_STRT		(0x0100)
+#define VPIF_CH2_HANC0_SIZE		(0x0104)
+#define VPIF_CH2_HANC1_STRT		(0x0108)
+#define VPIF_CH2_HANC1_SIZE		(0x010c)
+#define VPIF_CH2_VANC0_STRT		(0x0110)
+#define VPIF_CH2_VANC0_SIZE		(0x0114)
+#define VPIF_CH2_VANC1_STRT		(0x0118)
+#define VPIF_CH2_VANC1_SIZE		(0x011c)
+
+#define VPIF_CH3_TOP_STRT_ADD_LUMA	(0x0140)
+#define VPIF_CH3_BTM_STRT_ADD_LUMA	(0x0144)
+#define VPIF_CH3_TOP_STRT_ADD_CHROMA	(0x0148)
+#define VPIF_CH3_BTM_STRT_ADD_CHROMA	(0x014c)
+#define VPIF_CH3_TOP_STRT_ADD_HANC	(0x0150)
+#define VPIF_CH3_BTM_STRT_ADD_HANC	(0x0154)
+#define VPIF_CH3_TOP_STRT_ADD_VANC	(0x0158)
+#define VPIF_CH3_BTM_STRT_ADD_VANC	(0x015c)
+#define VPIF_CH3_SP_CFG			(0x0160)
+#define VPIF_CH3_IMG_ADD_OFST		(0x0164)
+#define VPIF_CH3_HANC_ADD_OFST		(0x0168)
+#define VPIF_CH3_H_CFG			(0x016c)
+#define VPIF_CH3_V_CFG_00		(0x0170)
+#define VPIF_CH3_V_CFG_01		(0x0174)
+#define VPIF_CH3_V_CFG_02		(0x0178)
+#define VPIF_CH3_V_CFG_03		(0x017c)
+#define VPIF_CH3_HANC0_STRT		(0x0180)
+#define VPIF_CH3_HANC0_SIZE		(0x0184)
+#define VPIF_CH3_HANC1_STRT		(0x0188)
+#define VPIF_CH3_HANC1_SIZE		(0x018c)
+#define VPIF_CH3_VANC0_STRT		(0x0190)
+#define VPIF_CH3_VANC0_SIZE		(0x0194)
+#define VPIF_CH3_VANC1_STRT		(0x0198)
+#define VPIF_CH3_VANC1_SIZE		(0x019c)
+
+#define VPIF_IODFT_CTRL			(0x01c0)
+
+/* Functions for bit Manipulation */
+static inline void vpif_set_bit(u32 reg, u32 bit)
+{
+	regw((regr(reg)) | (0x01 << bit), reg);
+}
+
+static inline void vpif_clr_bit(u32 reg, u32 bit)
+{
+	regw(((regr(reg)) & ~(0x01 << bit)), reg);
+}
+
+/* Macro for Generating mask */
+#ifdef GENERATE_MASK
+#undef GENERATE_MASK
+#endif
+
+#define GENERATE_MASK(bits, pos) \
+		((((0xFFFFFFFF) << (32 - bits)) >> (32 - bits)) << pos)
+
+/* Bit positions in the channel control registers */
+#define VPIF_CH_DATA_MODE_BIT	(2)
+#define VPIF_CH_YC_MUX_BIT	(3)
+#define VPIF_CH_SDR_FMT_BIT	(4)
+#define VPIF_CH_HANC_EN_BIT	(8)
+#define VPIF_CH_VANC_EN_BIT	(9)
+
+#define VPIF_CAPTURE_CH_NIP	(10)
+#define VPIF_DISPLAY_CH_NIP	(11)
+
+#define VPIF_DISPLAY_PIX_EN_BIT	(10)
+
+#define VPIF_CH_INPUT_FIELD_FRAME_BIT	(12)
+
+#define VPIF_CH_FID_POLARITY_BIT	(15)
+#define VPIF_CH_V_VALID_POLARITY_BIT	(14)
+#define VPIF_CH_H_VALID_POLARITY_BIT	(13)
+#define VPIF_CH_DATA_WIDTH_BIT		(28)
+
+#define VPIF_CH_CLK_EDGE_CTRL_BIT	(31)
+
+/* Mask various length */
+#define VPIF_CH_EAVSAV_MASK	GENERATE_MASK(13, 0)
+#define VPIF_CH_LEN_MASK	GENERATE_MASK(12, 0)
+#define VPIF_CH_WIDTH_MASK	GENERATE_MASK(13, 0)
+#define VPIF_CH_LEN_SHIFT	(16)
+
+/* VPIF masks for registers */
+#define VPIF_REQ_SIZE_MASK	(0x1ff)
+
+/* bit posotion of interrupt vpif_ch_intr register */
+#define VPIF_INTEN_FRAME_CH0	(0x00000001)
+#define VPIF_INTEN_FRAME_CH1	(0x00000002)
+#define VPIF_INTEN_FRAME_CH2	(0x00000004)
+#define VPIF_INTEN_FRAME_CH3	(0x00000008)
+
+/* bit position of clock and channel enable in vpif_chn_ctrl register */
+
+#define VPIF_CH0_CLK_EN		(0x00000002)
+#define VPIF_CH0_EN		(0x00000001)
+#define VPIF_CH1_CLK_EN		(0x00000002)
+#define VPIF_CH1_EN		(0x00000001)
+#define VPIF_CH2_CLK_EN		(0x00000002)
+#define VPIF_CH2_EN		(0x00000001)
+#define VPIF_CH3_CLK_EN		(0x00000002)
+#define VPIF_CH3_EN		(0x00000001)
+#define VPIF_CH_CLK_EN		(0x00000002)
+#define VPIF_CH_EN		(0x00000001)
+
+#define VPIF_INT_TOP	(0x00)
+#define VPIF_INT_BOTTOM	(0x01)
+#define VPIF_INT_BOTH	(0x02)
+
+#define VPIF_CH0_INT_CTRL_SHIFT	(6)
+#define VPIF_CH1_INT_CTRL_SHIFT	(6)
+#define VPIF_CH2_INT_CTRL_SHIFT	(6)
+#define VPIF_CH3_INT_CTRL_SHIFT	(6)
+#define VPIF_CH_INT_CTRL_SHIFT	(6)
+
+#define VPIF_CH2_CLIP_ANC_EN	14
+#define VPIF_CH2_CLIP_ACTIVE_EN	13
+
+#define VPIF_CH3_CLIP_ANC_EN	14
+#define VPIF_CH3_CLIP_ACTIVE_EN	13
+
+/* enabled interrupt on both the fields on vpid_ch0_ctrl register */
+#define channel0_intr_assert()	(regw((regr(VPIF_CH0_CTRL)|\
+	(VPIF_INT_BOTH << VPIF_CH0_INT_CTRL_SHIFT)), VPIF_CH0_CTRL))
+
+/* enabled interrupt on both the fields on vpid_ch1_ctrl register */
+#define channel1_intr_assert()	(regw((regr(VPIF_CH1_CTRL)|\
+	(VPIF_INT_BOTH << VPIF_CH1_INT_CTRL_SHIFT)), VPIF_CH1_CTRL))
+
+/* enabled interrupt on both the fields on vpid_ch0_ctrl register */
+#define channel2_intr_assert() 	(regw((regr(VPIF_CH2_CTRL)|\
+	(VPIF_INT_BOTH << VPIF_CH2_INT_CTRL_SHIFT)), VPIF_CH2_CTRL))
+
+/* enabled interrupt on both the fields on vpid_ch1_ctrl register */
+#define channel3_intr_assert() 	(regw((regr(VPIF_CH3_CTRL)|\
+	(VPIF_INT_BOTH << VPIF_CH3_INT_CTRL_SHIFT)), VPIF_CH3_CTRL))
+
+#define VPIF_CH_FID_MASK	(0x20)
+#define VPIF_CH_FID_SHIFT	(5)
+
+#define VPIF_NTSC_VBI_START_FIELD0	(1)
+#define VPIF_NTSC_VBI_START_FIELD1	(263)
+#define VPIF_PAL_VBI_START_FIELD0	(624)
+#define VPIF_PAL_VBI_START_FIELD1	(311)
+
+#define VPIF_NTSC_HBI_START_FIELD0	(1)
+#define VPIF_NTSC_HBI_START_FIELD1	(263)
+#define VPIF_PAL_HBI_START_FIELD0	(624)
+#define VPIF_PAL_HBI_START_FIELD1	(311)
+
+#define VPIF_NTSC_VBI_COUNT_FIELD0	(20)
+#define VPIF_NTSC_VBI_COUNT_FIELD1	(19)
+#define VPIF_PAL_VBI_COUNT_FIELD0	(24)
+#define VPIF_PAL_VBI_COUNT_FIELD1	(25)
+
+#define VPIF_NTSC_HBI_COUNT_FIELD0	(263)
+#define VPIF_NTSC_HBI_COUNT_FIELD1	(262)
+#define VPIF_PAL_HBI_COUNT_FIELD0	(312)
+#define VPIF_PAL_HBI_COUNT_FIELD1	(313)
+
+#define VPIF_NTSC_VBI_SAMPLES_PER_LINE	(720)
+#define VPIF_PAL_VBI_SAMPLES_PER_LINE	(720)
+#define VPIF_NTSC_HBI_SAMPLES_PER_LINE	(268)
+#define VPIF_PAL_HBI_SAMPLES_PER_LINE	(280)
+
+#define VPIF_CH_VANC_EN			(0x20)
+#define VPIF_DMA_REQ_SIZE		(0x080)
+#define VPIF_EMULATION_DISABLE		(0x01)
+
+extern u8 irq_vpif_capture_channel[VPIF_NUM_CHANNELS];
+
+/* inline function to enable/disable channel0 */
+static inline void enable_channel0(int enable)
+{
+	if (enable)
+		regw((regr(VPIF_CH0_CTRL) | (VPIF_CH0_EN)), VPIF_CH0_CTRL);
+	else
+		regw((regr(VPIF_CH0_CTRL) & (~VPIF_CH0_EN)), VPIF_CH0_CTRL);
+}
+
+/* inline function to enable/disable channel1 */
+static inline void enable_channel1(int enable)
+{
+	if (enable)
+		regw((regr(VPIF_CH1_CTRL) | (VPIF_CH1_EN)), VPIF_CH1_CTRL);
+	else
+		regw((regr(VPIF_CH1_CTRL) & (~VPIF_CH1_EN)), VPIF_CH1_CTRL);
+}
+
+/* inline function to enable interrupt for channel0 */
+static inline void channel0_intr_enable(int enable)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&vpif_lock, flags);
+
+	if (enable) {
+		regw((regr(VPIF_INTEN) | 0x10), VPIF_INTEN);
+		regw((regr(VPIF_INTEN_SET) | 0x10), VPIF_INTEN_SET);
+
+		regw((regr(VPIF_INTEN) | VPIF_INTEN_FRAME_CH0), VPIF_INTEN);
+		regw((regr(VPIF_INTEN_SET) | VPIF_INTEN_FRAME_CH0),
+							VPIF_INTEN_SET);
+	} else {
+		regw((regr(VPIF_INTEN) & (~VPIF_INTEN_FRAME_CH0)), VPIF_INTEN);
+		regw((regr(VPIF_INTEN_SET) | VPIF_INTEN_FRAME_CH0),
+							VPIF_INTEN_SET);
+	}
+	spin_unlock_irqrestore(&vpif_lock, flags);
+}
+
+/* inline function to enable interrupt for channel1 */
+static inline void channel1_intr_enable(int enable)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&vpif_lock, flags);
+
+	if (enable) {
+		regw((regr(VPIF_INTEN) | 0x10), VPIF_INTEN);
+		regw((regr(VPIF_INTEN_SET) | 0x10), VPIF_INTEN_SET);
+
+		regw((regr(VPIF_INTEN) | VPIF_INTEN_FRAME_CH1), VPIF_INTEN);
+		regw((regr(VPIF_INTEN_SET) | VPIF_INTEN_FRAME_CH1),
+							VPIF_INTEN_SET);
+	} else {
+		regw((regr(VPIF_INTEN) & (~VPIF_INTEN_FRAME_CH1)), VPIF_INTEN);
+		regw((regr(VPIF_INTEN_SET) | VPIF_INTEN_FRAME_CH1),
+							VPIF_INTEN_SET);
+	}
+	spin_unlock_irqrestore(&vpif_lock, flags);
+}
+
+/* inline function to set buffer addresses in case of Y/C non mux mode */
+static inline void ch0_set_videobuf_addr_yc_nmux(unsigned long top_strt_luma,
+						 unsigned long btm_strt_luma,
+						 unsigned long top_strt_chroma,
+						 unsigned long btm_strt_chroma)
+{
+	regw(top_strt_luma, VPIF_CH0_TOP_STRT_ADD_LUMA);
+	regw(btm_strt_luma, VPIF_CH0_BTM_STRT_ADD_LUMA);
+	regw(top_strt_chroma, VPIF_CH1_TOP_STRT_ADD_CHROMA);
+	regw(btm_strt_chroma, VPIF_CH1_BTM_STRT_ADD_CHROMA);
+}
+
+/* inline function to set buffer addresses in VPIF registers for video data */
+static inline void ch0_set_videobuf_addr(unsigned long top_strt_luma,
+					 unsigned long btm_strt_luma,
+					 unsigned long top_strt_chroma,
+					 unsigned long btm_strt_chroma)
+{
+	regw(top_strt_luma, VPIF_CH0_TOP_STRT_ADD_LUMA);
+	regw(btm_strt_luma, VPIF_CH0_BTM_STRT_ADD_LUMA);
+	regw(top_strt_chroma, VPIF_CH0_TOP_STRT_ADD_CHROMA);
+	regw(btm_strt_chroma, VPIF_CH0_BTM_STRT_ADD_CHROMA);
+}
+
+static inline void ch1_set_videobuf_addr(unsigned long top_strt_luma,
+					 unsigned long btm_strt_luma,
+					 unsigned long top_strt_chroma,
+					 unsigned long btm_strt_chroma)
+{
+
+	regw(top_strt_luma, VPIF_CH1_TOP_STRT_ADD_LUMA);
+	regw(btm_strt_luma, VPIF_CH1_BTM_STRT_ADD_LUMA);
+	regw(top_strt_chroma, VPIF_CH1_TOP_STRT_ADD_CHROMA);
+	regw(btm_strt_chroma, VPIF_CH1_BTM_STRT_ADD_CHROMA);
+}
+
+static inline void ch0_set_vbi_addr(unsigned long top_vbi,
+	unsigned long btm_vbi, unsigned long a, unsigned long b)
+{
+	regw(top_vbi, VPIF_CH0_TOP_STRT_ADD_VANC);
+	regw(btm_vbi, VPIF_CH0_BTM_STRT_ADD_VANC);
+}
+
+static inline void ch0_set_hbi_addr(unsigned long top_vbi,
+	unsigned long btm_vbi, unsigned long a, unsigned long b)
+{
+	regw(top_vbi, VPIF_CH0_TOP_STRT_ADD_HANC);
+	regw(btm_vbi, VPIF_CH0_BTM_STRT_ADD_HANC);
+}
+
+static inline void ch1_set_vbi_addr(unsigned long top_vbi,
+	unsigned long btm_vbi, unsigned long a, unsigned long b)
+{
+	regw(top_vbi, VPIF_CH1_TOP_STRT_ADD_VANC);
+	regw(btm_vbi, VPIF_CH1_BTM_STRT_ADD_VANC);
+}
+
+static inline void ch1_set_hbi_addr(unsigned long top_vbi,
+	unsigned long btm_vbi, unsigned long a, unsigned long b)
+{
+	regw(top_vbi, VPIF_CH1_TOP_STRT_ADD_HANC);
+	regw(btm_vbi, VPIF_CH1_BTM_STRT_ADD_HANC);
+}
+
+/* Inline function to enable raw vbi in the given channel */
+static inline void disable_raw_feature(u8 channel_id, u8 index)
+{
+	u32 ctrl_reg;
+	if (0 == channel_id)
+		ctrl_reg = VPIF_CH0_CTRL;
+	else
+		ctrl_reg = VPIF_CH1_CTRL;
+
+	if (1 == index)
+		vpif_clr_bit(ctrl_reg, VPIF_CH_VANC_EN_BIT);
+	else
+		vpif_clr_bit(ctrl_reg, VPIF_CH_HANC_EN_BIT);
+}
+
+static inline void enable_raw_feature(u8 channel_id, u8 index)
+{
+	u32 ctrl_reg;
+	if (0 == channel_id)
+		ctrl_reg = VPIF_CH0_CTRL;
+	else
+		ctrl_reg = VPIF_CH1_CTRL;
+
+	if (1 == index)
+		vpif_set_bit(ctrl_reg, VPIF_CH_VANC_EN_BIT);
+	else
+		vpif_set_bit(ctrl_reg, VPIF_CH_HANC_EN_BIT);
+}
+
+/* inline function to enable/disable channel2 */
+static inline void enable_channel2(int enable)
+{
+	if (enable) {
+		regw((regr(VPIF_CH2_CTRL) | (VPIF_CH2_CLK_EN)), VPIF_CH2_CTRL);
+		regw((regr(VPIF_CH2_CTRL) | (VPIF_CH2_EN)), VPIF_CH2_CTRL);
+	} else {
+		regw((regr(VPIF_CH2_CTRL) & (~VPIF_CH2_CLK_EN)), VPIF_CH2_CTRL);
+		regw((regr(VPIF_CH2_CTRL) & (~VPIF_CH2_EN)), VPIF_CH2_CTRL);
+	}
+}
+
+/* inline function to enable/disable channel3 */
+static inline void enable_channel3(int enable)
+{
+	if (enable) {
+		regw((regr(VPIF_CH3_CTRL) | (VPIF_CH3_CLK_EN)), VPIF_CH3_CTRL);
+		regw((regr(VPIF_CH3_CTRL) | (VPIF_CH3_EN)), VPIF_CH3_CTRL);
+	} else {
+		regw((regr(VPIF_CH3_CTRL) & (~VPIF_CH3_CLK_EN)), VPIF_CH3_CTRL);
+		regw((regr(VPIF_CH3_CTRL) & (~VPIF_CH3_EN)), VPIF_CH3_CTRL);
+	}
+}
+
+/* inline function to enable interrupt for channel2 */
+static inline void channel2_intr_enable(int enable)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&vpif_lock, flags);
+
+	if (enable) {
+		regw((regr(VPIF_INTEN) | 0x10), VPIF_INTEN);
+		regw((regr(VPIF_INTEN_SET) | 0x10), VPIF_INTEN_SET);
+		regw((regr(VPIF_INTEN) | VPIF_INTEN_FRAME_CH2), VPIF_INTEN);
+		regw((regr(VPIF_INTEN_SET) | VPIF_INTEN_FRAME_CH2),
+							VPIF_INTEN_SET);
+	} else {
+		regw((regr(VPIF_INTEN) & (~VPIF_INTEN_FRAME_CH2)), VPIF_INTEN);
+		regw((regr(VPIF_INTEN_SET) | VPIF_INTEN_FRAME_CH2),
+							VPIF_INTEN_SET);
+	}
+	spin_unlock_irqrestore(&vpif_lock, flags);
+}
+
+/* inline function to enable interrupt for channel3 */
+static inline void channel3_intr_enable(int enable)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&vpif_lock, flags);
+
+	if (enable) {
+		regw((regr(VPIF_INTEN) | 0x10), VPIF_INTEN);
+		regw((regr(VPIF_INTEN_SET) | 0x10), VPIF_INTEN_SET);
+
+		regw((regr(VPIF_INTEN) | VPIF_INTEN_FRAME_CH3), VPIF_INTEN);
+		regw((regr(VPIF_INTEN_SET) | VPIF_INTEN_FRAME_CH3),
+							VPIF_INTEN_SET);
+	} else {
+		regw((regr(VPIF_INTEN) & (~VPIF_INTEN_FRAME_CH3)), VPIF_INTEN);
+		regw((regr(VPIF_INTEN_SET) | VPIF_INTEN_FRAME_CH3),
+							VPIF_INTEN_SET);
+	}
+	spin_unlock_irqrestore(&vpif_lock, flags);
+}
+
+/* inline function to enable raw vbi data for channel2 */
+static inline void channel2_raw_enable(int enable, u8 index)
+{
+	u32 mask;
+
+	if (1 == index)
+		mask = VPIF_CH_VANC_EN_BIT;
+	else
+		mask = VPIF_CH_HANC_EN_BIT;
+
+	if (enable)
+		vpif_set_bit(VPIF_CH2_CTRL, mask);
+	else
+		vpif_clr_bit(VPIF_CH2_CTRL, mask);
+}
+
+/* inline function to enable raw vbi data for channel3*/
+static inline void channel3_raw_enable(int enable, u8 index)
+{
+	u32 mask;
+
+	if (1 == index)
+		mask = VPIF_CH_VANC_EN_BIT;
+	else
+		mask = VPIF_CH_HANC_EN_BIT;
+
+	if (enable)
+		vpif_set_bit(VPIF_CH3_CTRL, mask);
+	else
+		vpif_clr_bit(VPIF_CH3_CTRL, mask);
+}
+
+/* function to enable clipping (for both active and blanking regions) on ch 2 */
+static inline void channel2_clipping_enable(int enable)
+{
+	if (enable) {
+		vpif_set_bit(VPIF_CH2_CTRL, VPIF_CH2_CLIP_ANC_EN);
+		vpif_set_bit(VPIF_CH2_CTRL, VPIF_CH2_CLIP_ACTIVE_EN);
+	} else {
+		vpif_clr_bit(VPIF_CH2_CTRL, VPIF_CH2_CLIP_ANC_EN);
+		vpif_clr_bit(VPIF_CH2_CTRL, VPIF_CH2_CLIP_ACTIVE_EN);
+	}
+}
+
+/* function to enable clipping (for both active and blanking regions) on ch 3 */
+static inline void channel3_clipping_enable(int enable)
+{
+	if (enable) {
+		vpif_set_bit(VPIF_CH3_CTRL, VPIF_CH3_CLIP_ANC_EN);
+		vpif_set_bit(VPIF_CH3_CTRL, VPIF_CH3_CLIP_ACTIVE_EN);
+	} else {
+		vpif_clr_bit(VPIF_CH3_CTRL, VPIF_CH3_CLIP_ANC_EN);
+		vpif_clr_bit(VPIF_CH3_CTRL, VPIF_CH3_CLIP_ACTIVE_EN);
+	}
+}
+
+/* inline function to set buffer addresses in case of Y/C non mux mode */
+static inline void ch2_set_videobuf_addr_yc_nmux(unsigned long top_strt_luma,
+						 unsigned long btm_strt_luma,
+						 unsigned long top_strt_chroma,
+						 unsigned long btm_strt_chroma)
+{
+	regw(top_strt_luma, VPIF_CH2_TOP_STRT_ADD_LUMA);
+	regw(btm_strt_luma, VPIF_CH2_BTM_STRT_ADD_LUMA);
+	regw(top_strt_chroma, VPIF_CH3_TOP_STRT_ADD_CHROMA);
+	regw(btm_strt_chroma, VPIF_CH3_BTM_STRT_ADD_CHROMA);
+}
+
+/* inline function to set buffer addresses in VPIF registers for video data */
+static inline void ch2_set_videobuf_addr(unsigned long top_strt_luma,
+					 unsigned long btm_strt_luma,
+					 unsigned long top_strt_chroma,
+					 unsigned long btm_strt_chroma)
+{
+	regw(top_strt_luma, VPIF_CH2_TOP_STRT_ADD_LUMA);
+	regw(btm_strt_luma, VPIF_CH2_BTM_STRT_ADD_LUMA);
+	regw(top_strt_chroma, VPIF_CH2_TOP_STRT_ADD_CHROMA);
+	regw(btm_strt_chroma, VPIF_CH2_BTM_STRT_ADD_CHROMA);
+}
+
+static inline void ch3_set_videobuf_addr(unsigned long top_strt_luma,
+					 unsigned long btm_strt_luma,
+					 unsigned long top_strt_chroma,
+					 unsigned long btm_strt_chroma)
+{
+	regw(top_strt_luma, VPIF_CH3_TOP_STRT_ADD_LUMA);
+	regw(btm_strt_luma, VPIF_CH3_BTM_STRT_ADD_LUMA);
+	regw(top_strt_chroma, VPIF_CH3_TOP_STRT_ADD_CHROMA);
+	regw(btm_strt_chroma, VPIF_CH3_BTM_STRT_ADD_CHROMA);
+}
+
+/* inline function to set buffer addresses in VPIF registers for vbi data */
+static inline void ch2_set_vbi_addr(unsigned long top_strt_luma,
+					 unsigned long btm_strt_luma,
+					 unsigned long top_strt_chroma,
+					 unsigned long btm_strt_chroma)
+{
+	regw(top_strt_luma, VPIF_CH2_TOP_STRT_ADD_VANC);
+	regw(btm_strt_luma, VPIF_CH2_BTM_STRT_ADD_VANC);
+}
+
+static inline void ch3_set_vbi_addr(unsigned long top_strt_luma,
+					 unsigned long btm_strt_luma,
+					 unsigned long top_strt_chroma,
+					 unsigned long btm_strt_chroma)
+{
+	regw(top_strt_luma, VPIF_CH3_TOP_STRT_ADD_VANC);
+	regw(btm_strt_luma, VPIF_CH3_BTM_STRT_ADD_VANC);
+}
+
+static inline int vpif_intr_status(int channel)
+{
+	int status = 0;
+	int mask;
+
+	if (channel < 0 || channel > 3)
+		return 0;
+
+	mask = 1 << channel;
+	status = regr(VPIF_STATUS) & mask;
+	regw(status, VPIF_STATUS_CLR);
+
+	return status;
+}
+
+#define VPIF_MAX_NAME	(30)
+
+/* This structure will store size parameters as per the mode selected by user */
+struct vpif_channel_config_params {
+	char name[VPIF_MAX_NAME];	/* Name of the mode */
+	u16 width;			/* Indicates width of the image */
+	u16 height;			/* Indicates height of the image */
+	u8 frm_fmt;			/* Interlaced (0) or progressive (1) */
+	u8 ycmux_mode;			/* This mode requires one (0) or two (1)
+					   channels */
+	u16 eav2sav;			/* length of eav 2 sav */
+	u16 sav2eav;			/* length of sav 2 eav */
+	u16 l1, l3, l5, l7, l9, l11;	/* Other parameter configurations */
+	u16 vsize;			/* Vertical size of the image */
+	u8 capture_format;		/* Indicates whether capture format
+					 * is in BT or in CCD/CMOS */
+	u8  vbi_supported;		/* Indicates whether this mode
+					 * supports capturing vbi or not */
+	u8 hd_sd;			/* HDTV (1) or SDTV (0) format */
+	v4l2_std_id stdid;		/* SDTV format */
+	struct v4l2_dv_timings dv_timings;	/* HDTV format */
+};
+
+extern const unsigned int vpif_ch_params_count;
+extern const struct vpif_channel_config_params vpif_ch_params[];
+
+struct vpif_video_params;
+struct vpif_params;
+struct vpif_vbi_params;
+
+int vpif_set_video_params(struct vpif_params *vpifparams, u8 channel_id);
+void vpif_set_vbi_display_params(struct vpif_vbi_params *vbiparams,
+							u8 channel_id);
+int vpif_channel_getfid(u8 channel_id);
+
+enum data_size {
+	_8BITS = 0,
+	_10BITS,
+	_12BITS,
+};
+
+/* Structure for vpif parameters for raw vbi data */
+struct vpif_vbi_params {
+	__u32 hstart0;  /* Horizontal start of raw vbi data for first field */
+	__u32 vstart0;  /* Vertical start of raw vbi data for first field */
+	__u32 hsize0;   /* Horizontal size of raw vbi data for first field */
+	__u32 vsize0;   /* Vertical size of raw vbi data for first field */
+	__u32 hstart1;  /* Horizontal start of raw vbi data for second field */
+	__u32 vstart1;  /* Vertical start of raw vbi data for second field */
+	__u32 hsize1;   /* Horizontal size of raw vbi data for second field */
+	__u32 vsize1;   /* Vertical size of raw vbi data for second field */
+};
+
+/* structure for vpif parameters */
+struct vpif_video_params {
+	__u8 storage_mode;	/* Indicates field or frame mode */
+	unsigned long hpitch;
+	v4l2_std_id stdid;
+};
+
+struct vpif_params {
+	struct vpif_interface iface;
+	struct vpif_video_params video_params;
+	struct vpif_channel_config_params std_info;
+	union param {
+		struct vpif_vbi_params	vbi_params;
+		enum data_size data_sz;
+	} params;
+};
+
+#endif				/* End of #ifndef VPIF_H */
+
diff --git a/drivers/media/platform/davinci/vpif_capture.c b/drivers/media/platform/davinci/vpif_capture.c
new file mode 100644
index 000000000..a5f548138
--- /dev/null
+++ b/drivers/media/platform/davinci/vpif_capture.c
@@ -0,0 +1,1635 @@
+/*
+ * Copyright (C) 2009 Texas Instruments Inc
+ * Copyright (C) 2014 Lad, Prabhakar <prabhakar.csengg@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ * TODO : add support for VBI & HBI data service
+ *	  add static buffer allocation
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <media/v4l2-ioctl.h>
+
+#include "vpif.h"
+#include "vpif_capture.h"
+
+MODULE_DESCRIPTION("TI DaVinci VPIF Capture driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(VPIF_CAPTURE_VERSION);
+
+#define vpif_err(fmt, arg...)	v4l2_err(&vpif_obj.v4l2_dev, fmt, ## arg)
+#define vpif_dbg(level, debug, fmt, arg...)	\
+		v4l2_dbg(level, debug, &vpif_obj.v4l2_dev, fmt, ## arg)
+
+static int debug = 1;
+
+module_param(debug, int, 0644);
+
+MODULE_PARM_DESC(debug, "Debug level 0-1");
+
+#define VPIF_DRIVER_NAME	"vpif_capture"
+
+/* global variables */
+static struct vpif_device vpif_obj = { {NULL} };
+static struct device *vpif_dev;
+static void vpif_calculate_offsets(struct channel_obj *ch);
+static void vpif_config_addr(struct channel_obj *ch, int muxmode);
+
+static u8 channel_first_int[VPIF_NUMBER_OF_OBJECTS][2] = { {1, 1} };
+
+/* Is set to 1 in case of SDTV formats, 2 in case of HDTV formats. */
+static int ycmux_mode;
+
+static inline struct vpif_cap_buffer *to_vpif_buffer(struct vb2_buffer *vb)
+{
+	return container_of(vb, struct vpif_cap_buffer, vb);
+}
+
+/**
+ * vpif_buffer_prepare :  callback function for buffer prepare
+ * @vb: ptr to vb2_buffer
+ *
+ * This is the callback function for buffer prepare when vb2_qbuf()
+ * function is called. The buffer is prepared and user space virtual address
+ * or user address is converted into  physical address
+ */
+static int vpif_buffer_prepare(struct vb2_buffer *vb)
+{
+	struct vb2_queue *q = vb->vb2_queue;
+	struct channel_obj *ch = vb2_get_drv_priv(q);
+	struct common_obj *common;
+	unsigned long addr;
+
+	vpif_dbg(2, debug, "vpif_buffer_prepare\n");
+
+	common = &ch->common[VPIF_VIDEO_INDEX];
+
+	vb2_set_plane_payload(vb, 0, common->fmt.fmt.pix.sizeimage);
+	if (vb2_get_plane_payload(vb, 0) > vb2_plane_size(vb, 0))
+		return -EINVAL;
+
+	vb->v4l2_buf.field = common->fmt.fmt.pix.field;
+
+	addr = vb2_dma_contig_plane_dma_addr(vb, 0);
+	if (!IS_ALIGNED((addr + common->ytop_off), 8) ||
+		!IS_ALIGNED((addr + common->ybtm_off), 8) ||
+		!IS_ALIGNED((addr + common->ctop_off), 8) ||
+		!IS_ALIGNED((addr + common->cbtm_off), 8)) {
+		vpif_dbg(1, debug, "offset is not aligned\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/**
+ * vpif_buffer_queue_setup : Callback function for buffer setup.
+ * @vq: vb2_queue ptr
+ * @fmt: v4l2 format
+ * @nbuffers: ptr to number of buffers requested by application
+ * @nplanes:: contains number of distinct video planes needed to hold a frame
+ * @sizes[]: contains the size (in bytes) of each plane.
+ * @alloc_ctxs: ptr to allocation context
+ *
+ * This callback function is called when reqbuf() is called to adjust
+ * the buffer count and buffer size
+ */
+static int vpif_buffer_queue_setup(struct vb2_queue *vq,
+				const struct v4l2_format *fmt,
+				unsigned int *nbuffers, unsigned int *nplanes,
+				unsigned int sizes[], void *alloc_ctxs[])
+{
+	struct channel_obj *ch = vb2_get_drv_priv(vq);
+	struct common_obj *common;
+
+	common = &ch->common[VPIF_VIDEO_INDEX];
+
+	vpif_dbg(2, debug, "vpif_buffer_setup\n");
+
+	if (fmt && fmt->fmt.pix.sizeimage < common->fmt.fmt.pix.sizeimage)
+		return -EINVAL;
+
+	if (vq->num_buffers + *nbuffers < 3)
+		*nbuffers = 3 - vq->num_buffers;
+
+	*nplanes = 1;
+	sizes[0] = fmt ? fmt->fmt.pix.sizeimage : common->fmt.fmt.pix.sizeimage;
+	alloc_ctxs[0] = common->alloc_ctx;
+
+	/* Calculate the offset for Y and C data in the buffer */
+	vpif_calculate_offsets(ch);
+
+	return 0;
+}
+
+/**
+ * vpif_buffer_queue : Callback function to add buffer to DMA queue
+ * @vb: ptr to vb2_buffer
+ */
+static void vpif_buffer_queue(struct vb2_buffer *vb)
+{
+	struct channel_obj *ch = vb2_get_drv_priv(vb->vb2_queue);
+	struct vpif_cap_buffer *buf = to_vpif_buffer(vb);
+	struct common_obj *common;
+	unsigned long flags;
+
+	common = &ch->common[VPIF_VIDEO_INDEX];
+
+	vpif_dbg(2, debug, "vpif_buffer_queue\n");
+
+	spin_lock_irqsave(&common->irqlock, flags);
+	/* add the buffer to the DMA queue */
+	list_add_tail(&buf->list, &common->dma_queue);
+	spin_unlock_irqrestore(&common->irqlock, flags);
+}
+
+/**
+ * vpif_start_streaming : Starts the DMA engine for streaming
+ * @vb: ptr to vb2_buffer
+ * @count: number of buffers
+ */
+static int vpif_start_streaming(struct vb2_queue *vq, unsigned int count)
+{
+	struct vpif_capture_config *vpif_config_data =
+					vpif_dev->platform_data;
+	struct channel_obj *ch = vb2_get_drv_priv(vq);
+	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
+	struct vpif_params *vpif = &ch->vpifparams;
+	struct vpif_cap_buffer *buf, *tmp;
+	unsigned long addr, flags;
+	int ret;
+
+	spin_lock_irqsave(&common->irqlock, flags);
+
+	/* Initialize field_id */
+	ch->field_id = 0;
+
+	/* configure 1 or 2 channel mode */
+	if (vpif_config_data->setup_input_channel_mode) {
+		ret = vpif_config_data->
+			setup_input_channel_mode(vpif->std_info.ycmux_mode);
+		if (ret < 0) {
+			vpif_dbg(1, debug, "can't set vpif channel mode\n");
+			goto err;
+		}
+	}
+
+	ret = v4l2_subdev_call(ch->sd, video, s_stream, 1);
+	if (ret && ret != -ENOIOCTLCMD && ret != -ENODEV) {
+		vpif_dbg(1, debug, "stream on failed in subdev\n");
+		goto err;
+	}
+
+	/* Call vpif_set_params function to set the parameters and addresses */
+	ret = vpif_set_video_params(vpif, ch->channel_id);
+	if (ret < 0) {
+		vpif_dbg(1, debug, "can't set video params\n");
+		goto err;
+	}
+
+	ycmux_mode = ret;
+	vpif_config_addr(ch, ret);
+
+	/* Get the next frame from the buffer queue */
+	common->cur_frm = common->next_frm = list_entry(common->dma_queue.next,
+				    struct vpif_cap_buffer, list);
+	/* Remove buffer from the buffer queue */
+	list_del(&common->cur_frm->list);
+	spin_unlock_irqrestore(&common->irqlock, flags);
+
+	addr = vb2_dma_contig_plane_dma_addr(&common->cur_frm->vb, 0);
+
+	common->set_addr(addr + common->ytop_off,
+			 addr + common->ybtm_off,
+			 addr + common->ctop_off,
+			 addr + common->cbtm_off);
+
+	/**
+	 * Set interrupt for both the fields in VPIF Register enable channel in
+	 * VPIF register
+	 */
+	channel_first_int[VPIF_VIDEO_INDEX][ch->channel_id] = 1;
+	if (VPIF_CHANNEL0_VIDEO == ch->channel_id) {
+		channel0_intr_assert();
+		channel0_intr_enable(1);
+		enable_channel0(1);
+	}
+	if (VPIF_CHANNEL1_VIDEO == ch->channel_id ||
+		ycmux_mode == 2) {
+		channel1_intr_assert();
+		channel1_intr_enable(1);
+		enable_channel1(1);
+	}
+
+	return 0;
+
+err:
+	list_for_each_entry_safe(buf, tmp, &common->dma_queue, list) {
+		list_del(&buf->list);
+		vb2_buffer_done(&buf->vb, VB2_BUF_STATE_QUEUED);
+	}
+	spin_unlock_irqrestore(&common->irqlock, flags);
+
+	return ret;
+}
+
+/**
+ * vpif_stop_streaming : Stop the DMA engine
+ * @vq: ptr to vb2_queue
+ *
+ * This callback stops the DMA engine and any remaining buffers
+ * in the DMA queue are released.
+ */
+static void vpif_stop_streaming(struct vb2_queue *vq)
+{
+	struct channel_obj *ch = vb2_get_drv_priv(vq);
+	struct common_obj *common;
+	unsigned long flags;
+	int ret;
+
+	common = &ch->common[VPIF_VIDEO_INDEX];
+
+	/* Disable channel as per its device type and channel id */
+	if (VPIF_CHANNEL0_VIDEO == ch->channel_id) {
+		enable_channel0(0);
+		channel0_intr_enable(0);
+	}
+	if (VPIF_CHANNEL1_VIDEO == ch->channel_id ||
+		ycmux_mode == 2) {
+		enable_channel1(0);
+		channel1_intr_enable(0);
+	}
+
+	ycmux_mode = 0;
+
+	ret = v4l2_subdev_call(ch->sd, video, s_stream, 0);
+	if (ret && ret != -ENOIOCTLCMD && ret != -ENODEV)
+		vpif_dbg(1, debug, "stream off failed in subdev\n");
+
+	/* release all active buffers */
+	spin_lock_irqsave(&common->irqlock, flags);
+	if (common->cur_frm == common->next_frm) {
+		vb2_buffer_done(&common->cur_frm->vb, VB2_BUF_STATE_ERROR);
+	} else {
+		if (common->cur_frm != NULL)
+			vb2_buffer_done(&common->cur_frm->vb,
+					VB2_BUF_STATE_ERROR);
+		if (common->next_frm != NULL)
+			vb2_buffer_done(&common->next_frm->vb,
+					VB2_BUF_STATE_ERROR);
+	}
+
+	while (!list_empty(&common->dma_queue)) {
+		common->next_frm = list_entry(common->dma_queue.next,
+						struct vpif_cap_buffer, list);
+		list_del(&common->next_frm->list);
+		vb2_buffer_done(&common->next_frm->vb, VB2_BUF_STATE_ERROR);
+	}
+	spin_unlock_irqrestore(&common->irqlock, flags);
+}
+
+static struct vb2_ops video_qops = {
+	.queue_setup		= vpif_buffer_queue_setup,
+	.buf_prepare		= vpif_buffer_prepare,
+	.start_streaming	= vpif_start_streaming,
+	.stop_streaming		= vpif_stop_streaming,
+	.buf_queue		= vpif_buffer_queue,
+	.wait_prepare		= vb2_ops_wait_prepare,
+	.wait_finish		= vb2_ops_wait_finish,
+};
+
+/**
+ * vpif_process_buffer_complete: process a completed buffer
+ * @common: ptr to common channel object
+ *
+ * This function time stamp the buffer and mark it as DONE. It also
+ * wake up any process waiting on the QUEUE and set the next buffer
+ * as current
+ */
+static void vpif_process_buffer_complete(struct common_obj *common)
+{
+	v4l2_get_timestamp(&common->cur_frm->vb.v4l2_buf.timestamp);
+	vb2_buffer_done(&common->cur_frm->vb,
+					    VB2_BUF_STATE_DONE);
+	/* Make curFrm pointing to nextFrm */
+	common->cur_frm = common->next_frm;
+}
+
+/**
+ * vpif_schedule_next_buffer: set next buffer address for capture
+ * @common : ptr to common channel object
+ *
+ * This function will get next buffer from the dma queue and
+ * set the buffer address in the vpif register for capture.
+ * the buffer is marked active
+ */
+static void vpif_schedule_next_buffer(struct common_obj *common)
+{
+	unsigned long addr = 0;
+
+	spin_lock(&common->irqlock);
+	common->next_frm = list_entry(common->dma_queue.next,
+				     struct vpif_cap_buffer, list);
+	/* Remove that buffer from the buffer queue */
+	list_del(&common->next_frm->list);
+	spin_unlock(&common->irqlock);
+	addr = vb2_dma_contig_plane_dma_addr(&common->next_frm->vb, 0);
+
+	/* Set top and bottom field addresses in VPIF registers */
+	common->set_addr(addr + common->ytop_off,
+			 addr + common->ybtm_off,
+			 addr + common->ctop_off,
+			 addr + common->cbtm_off);
+}
+
+/**
+ * vpif_channel_isr : ISR handler for vpif capture
+ * @irq: irq number
+ * @dev_id: dev_id ptr
+ *
+ * It changes status of the captured buffer, takes next buffer from the queue
+ * and sets its address in VPIF registers
+ */
+static irqreturn_t vpif_channel_isr(int irq, void *dev_id)
+{
+	struct vpif_device *dev = &vpif_obj;
+	struct common_obj *common;
+	struct channel_obj *ch;
+	int channel_id = 0;
+	int fid = -1, i;
+
+	channel_id = *(int *)(dev_id);
+	if (!vpif_intr_status(channel_id))
+		return IRQ_NONE;
+
+	ch = dev->dev[channel_id];
+
+	for (i = 0; i < VPIF_NUMBER_OF_OBJECTS; i++) {
+		common = &ch->common[i];
+		/* skip If streaming is not started in this channel */
+		/* Check the field format */
+		if (1 == ch->vpifparams.std_info.frm_fmt) {
+			/* Progressive mode */
+			spin_lock(&common->irqlock);
+			if (list_empty(&common->dma_queue)) {
+				spin_unlock(&common->irqlock);
+				continue;
+			}
+			spin_unlock(&common->irqlock);
+
+			if (!channel_first_int[i][channel_id])
+				vpif_process_buffer_complete(common);
+
+			channel_first_int[i][channel_id] = 0;
+
+			vpif_schedule_next_buffer(common);
+
+
+			channel_first_int[i][channel_id] = 0;
+		} else {
+			/**
+			 * Interlaced mode. If it is first interrupt, ignore
+			 * it
+			 */
+			if (channel_first_int[i][channel_id]) {
+				channel_first_int[i][channel_id] = 0;
+				continue;
+			}
+			if (0 == i) {
+				ch->field_id ^= 1;
+				/* Get field id from VPIF registers */
+				fid = vpif_channel_getfid(ch->channel_id);
+				if (fid != ch->field_id) {
+					/**
+					 * If field id does not match stored
+					 * field id, make them in sync
+					 */
+					if (0 == fid)
+						ch->field_id = fid;
+					return IRQ_HANDLED;
+				}
+			}
+			/* device field id and local field id are in sync */
+			if (0 == fid) {
+				/* this is even field */
+				if (common->cur_frm == common->next_frm)
+					continue;
+
+				/* mark the current buffer as done */
+				vpif_process_buffer_complete(common);
+			} else if (1 == fid) {
+				/* odd field */
+				spin_lock(&common->irqlock);
+				if (list_empty(&common->dma_queue) ||
+				    (common->cur_frm != common->next_frm)) {
+					spin_unlock(&common->irqlock);
+					continue;
+				}
+				spin_unlock(&common->irqlock);
+
+				vpif_schedule_next_buffer(common);
+			}
+		}
+	}
+	return IRQ_HANDLED;
+}
+
+/**
+ * vpif_update_std_info() - update standard related info
+ * @ch: ptr to channel object
+ *
+ * For a given standard selected by application, update values
+ * in the device data structures
+ */
+static int vpif_update_std_info(struct channel_obj *ch)
+{
+	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
+	struct vpif_params *vpifparams = &ch->vpifparams;
+	const struct vpif_channel_config_params *config;
+	struct vpif_channel_config_params *std_info = &vpifparams->std_info;
+	struct video_obj *vid_ch = &ch->video;
+	int index;
+
+	vpif_dbg(2, debug, "vpif_update_std_info\n");
+
+	for (index = 0; index < vpif_ch_params_count; index++) {
+		config = &vpif_ch_params[index];
+		if (config->hd_sd == 0) {
+			vpif_dbg(2, debug, "SD format\n");
+			if (config->stdid & vid_ch->stdid) {
+				memcpy(std_info, config, sizeof(*config));
+				break;
+			}
+		} else {
+			vpif_dbg(2, debug, "HD format\n");
+			if (!memcmp(&config->dv_timings, &vid_ch->dv_timings,
+				sizeof(vid_ch->dv_timings))) {
+				memcpy(std_info, config, sizeof(*config));
+				break;
+			}
+		}
+	}
+
+	/* standard not found */
+	if (index == vpif_ch_params_count)
+		return -EINVAL;
+
+	common->fmt.fmt.pix.width = std_info->width;
+	common->width = std_info->width;
+	common->fmt.fmt.pix.height = std_info->height;
+	common->height = std_info->height;
+	common->fmt.fmt.pix.sizeimage = common->height * common->width * 2;
+	common->fmt.fmt.pix.bytesperline = std_info->width;
+	vpifparams->video_params.hpitch = std_info->width;
+	vpifparams->video_params.storage_mode = std_info->frm_fmt;
+
+	if (vid_ch->stdid)
+		common->fmt.fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M;
+	else
+		common->fmt.fmt.pix.colorspace = V4L2_COLORSPACE_REC709;
+
+	if (ch->vpifparams.std_info.frm_fmt)
+		common->fmt.fmt.pix.field = V4L2_FIELD_NONE;
+	else
+		common->fmt.fmt.pix.field = V4L2_FIELD_INTERLACED;
+
+	if (ch->vpifparams.iface.if_type == VPIF_IF_RAW_BAYER)
+		common->fmt.fmt.pix.pixelformat = V4L2_PIX_FMT_SBGGR8;
+	else
+		common->fmt.fmt.pix.pixelformat = V4L2_PIX_FMT_YUV422P;
+
+	common->fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+
+	return 0;
+}
+
+/**
+ * vpif_calculate_offsets : This function calculates buffers offsets
+ * @ch : ptr to channel object
+ *
+ * This function calculates buffer offsets for Y and C in the top and
+ * bottom field
+ */
+static void vpif_calculate_offsets(struct channel_obj *ch)
+{
+	unsigned int hpitch, sizeimage;
+	struct video_obj *vid_ch = &(ch->video);
+	struct vpif_params *vpifparams = &ch->vpifparams;
+	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
+	enum v4l2_field field = common->fmt.fmt.pix.field;
+
+	vpif_dbg(2, debug, "vpif_calculate_offsets\n");
+
+	if (V4L2_FIELD_ANY == field) {
+		if (vpifparams->std_info.frm_fmt)
+			vid_ch->buf_field = V4L2_FIELD_NONE;
+		else
+			vid_ch->buf_field = V4L2_FIELD_INTERLACED;
+	} else
+		vid_ch->buf_field = common->fmt.fmt.pix.field;
+
+	sizeimage = common->fmt.fmt.pix.sizeimage;
+
+	hpitch = common->fmt.fmt.pix.bytesperline;
+
+	if ((V4L2_FIELD_NONE == vid_ch->buf_field) ||
+	    (V4L2_FIELD_INTERLACED == vid_ch->buf_field)) {
+		/* Calculate offsets for Y top, Y Bottom, C top and C Bottom */
+		common->ytop_off = 0;
+		common->ybtm_off = hpitch;
+		common->ctop_off = sizeimage / 2;
+		common->cbtm_off = sizeimage / 2 + hpitch;
+	} else if (V4L2_FIELD_SEQ_TB == vid_ch->buf_field) {
+		/* Calculate offsets for Y top, Y Bottom, C top and C Bottom */
+		common->ytop_off = 0;
+		common->ybtm_off = sizeimage / 4;
+		common->ctop_off = sizeimage / 2;
+		common->cbtm_off = common->ctop_off + sizeimage / 4;
+	} else if (V4L2_FIELD_SEQ_BT == vid_ch->buf_field) {
+		/* Calculate offsets for Y top, Y Bottom, C top and C Bottom */
+		common->ybtm_off = 0;
+		common->ytop_off = sizeimage / 4;
+		common->cbtm_off = sizeimage / 2;
+		common->ctop_off = common->cbtm_off + sizeimage / 4;
+	}
+	if ((V4L2_FIELD_NONE == vid_ch->buf_field) ||
+	    (V4L2_FIELD_INTERLACED == vid_ch->buf_field))
+		vpifparams->video_params.storage_mode = 1;
+	else
+		vpifparams->video_params.storage_mode = 0;
+
+	if (1 == vpifparams->std_info.frm_fmt)
+		vpifparams->video_params.hpitch =
+		    common->fmt.fmt.pix.bytesperline;
+	else {
+		if ((field == V4L2_FIELD_ANY)
+		    || (field == V4L2_FIELD_INTERLACED))
+			vpifparams->video_params.hpitch =
+			    common->fmt.fmt.pix.bytesperline * 2;
+		else
+			vpifparams->video_params.hpitch =
+			    common->fmt.fmt.pix.bytesperline;
+	}
+
+	ch->vpifparams.video_params.stdid = vpifparams->std_info.stdid;
+}
+
+/**
+ * vpif_get_default_field() - Get default field type based on interface
+ * @vpif_params - ptr to vpif params
+ */
+static inline enum v4l2_field vpif_get_default_field(
+				struct vpif_interface *iface)
+{
+	return (iface->if_type == VPIF_IF_RAW_BAYER) ? V4L2_FIELD_NONE :
+						V4L2_FIELD_INTERLACED;
+}
+
+/**
+ * vpif_config_addr() - function to configure buffer address in vpif
+ * @ch - channel ptr
+ * @muxmode - channel mux mode
+ */
+static void vpif_config_addr(struct channel_obj *ch, int muxmode)
+{
+	struct common_obj *common;
+
+	vpif_dbg(2, debug, "vpif_config_addr\n");
+
+	common = &(ch->common[VPIF_VIDEO_INDEX]);
+
+	if (VPIF_CHANNEL1_VIDEO == ch->channel_id)
+		common->set_addr = ch1_set_videobuf_addr;
+	else if (2 == muxmode)
+		common->set_addr = ch0_set_videobuf_addr_yc_nmux;
+	else
+		common->set_addr = ch0_set_videobuf_addr;
+}
+
+/**
+ * vpif_input_to_subdev() - Maps input to sub device
+ * @vpif_cfg - global config ptr
+ * @chan_cfg - channel config ptr
+ * @input_index - Given input index from application
+ *
+ * lookup the sub device information for a given input index.
+ * we report all the inputs to application. inputs table also
+ * has sub device name for the each input
+ */
+static int vpif_input_to_subdev(
+		struct vpif_capture_config *vpif_cfg,
+		struct vpif_capture_chan_config *chan_cfg,
+		int input_index)
+{
+	struct vpif_subdev_info *subdev_info;
+	const char *subdev_name;
+	int i;
+
+	vpif_dbg(2, debug, "vpif_input_to_subdev\n");
+
+	subdev_name = chan_cfg->inputs[input_index].subdev_name;
+	if (subdev_name == NULL)
+		return -1;
+
+	/* loop through the sub device list to get the sub device info */
+	for (i = 0; i < vpif_cfg->subdev_count; i++) {
+		subdev_info = &vpif_cfg->subdev_info[i];
+		if (!strcmp(subdev_info->name, subdev_name))
+			return i;
+	}
+	return -1;
+}
+
+/**
+ * vpif_set_input() - Select an input
+ * @vpif_cfg - global config ptr
+ * @ch - channel
+ * @_index - Given input index from application
+ *
+ * Select the given input.
+ */
+static int vpif_set_input(
+		struct vpif_capture_config *vpif_cfg,
+		struct channel_obj *ch,
+		int index)
+{
+	struct vpif_capture_chan_config *chan_cfg =
+			&vpif_cfg->chan_config[ch->channel_id];
+	struct vpif_subdev_info *subdev_info = NULL;
+	struct v4l2_subdev *sd = NULL;
+	u32 input = 0, output = 0;
+	int sd_index;
+	int ret;
+
+	sd_index = vpif_input_to_subdev(vpif_cfg, chan_cfg, index);
+	if (sd_index >= 0) {
+		sd = vpif_obj.sd[sd_index];
+		subdev_info = &vpif_cfg->subdev_info[sd_index];
+	}
+
+	/* first setup input path from sub device to vpif */
+	if (sd && vpif_cfg->setup_input_path) {
+		ret = vpif_cfg->setup_input_path(ch->channel_id,
+				       subdev_info->name);
+		if (ret < 0) {
+			vpif_dbg(1, debug, "couldn't setup input path for the" \
+			" sub device %s, for input index %d\n",
+			subdev_info->name, index);
+			return ret;
+		}
+	}
+
+	if (sd) {
+		input = chan_cfg->inputs[index].input_route;
+		output = chan_cfg->inputs[index].output_route;
+		ret = v4l2_subdev_call(sd, video, s_routing,
+				input, output, 0);
+		if (ret < 0 && ret != -ENOIOCTLCMD) {
+			vpif_dbg(1, debug, "Failed to set input\n");
+			return ret;
+		}
+	}
+	ch->input_idx = index;
+	ch->sd = sd;
+	/* copy interface parameters to vpif */
+	ch->vpifparams.iface = chan_cfg->vpif_if;
+
+	/* update tvnorms from the sub device input info */
+	ch->video_dev.tvnorms = chan_cfg->inputs[index].input.std;
+	return 0;
+}
+
+/**
+ * vpif_querystd() - querystd handler
+ * @file: file ptr
+ * @priv: file handle
+ * @std_id: ptr to std id
+ *
+ * This function is called to detect standard at the selected input
+ */
+static int vpif_querystd(struct file *file, void *priv, v4l2_std_id *std_id)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct channel_obj *ch = video_get_drvdata(vdev);
+	int ret = 0;
+
+	vpif_dbg(2, debug, "vpif_querystd\n");
+
+	/* Call querystd function of decoder device */
+	ret = v4l2_subdev_call(ch->sd, video, querystd, std_id);
+
+	if (ret == -ENOIOCTLCMD || ret == -ENODEV)
+		return -ENODATA;
+	if (ret) {
+		vpif_dbg(1, debug, "Failed to query standard for sub devices\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+/**
+ * vpif_g_std() - get STD handler
+ * @file: file ptr
+ * @priv: file handle
+ * @std_id: ptr to std id
+ */
+static int vpif_g_std(struct file *file, void *priv, v4l2_std_id *std)
+{
+	struct vpif_capture_config *config = vpif_dev->platform_data;
+	struct video_device *vdev = video_devdata(file);
+	struct channel_obj *ch = video_get_drvdata(vdev);
+	struct vpif_capture_chan_config *chan_cfg;
+	struct v4l2_input input;
+
+	vpif_dbg(2, debug, "vpif_g_std\n");
+
+	if (config->chan_config[ch->channel_id].inputs == NULL)
+		return -ENODATA;
+
+	chan_cfg = &config->chan_config[ch->channel_id];
+	input = chan_cfg->inputs[ch->input_idx].input;
+	if (input.capabilities != V4L2_IN_CAP_STD)
+		return -ENODATA;
+
+	*std = ch->video.stdid;
+	return 0;
+}
+
+/**
+ * vpif_s_std() - set STD handler
+ * @file: file ptr
+ * @priv: file handle
+ * @std_id: ptr to std id
+ */
+static int vpif_s_std(struct file *file, void *priv, v4l2_std_id std_id)
+{
+	struct vpif_capture_config *config = vpif_dev->platform_data;
+	struct video_device *vdev = video_devdata(file);
+	struct channel_obj *ch = video_get_drvdata(vdev);
+	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
+	struct vpif_capture_chan_config *chan_cfg;
+	struct v4l2_input input;
+	int ret;
+
+	vpif_dbg(2, debug, "vpif_s_std\n");
+
+	if (config->chan_config[ch->channel_id].inputs == NULL)
+		return -ENODATA;
+
+	chan_cfg = &config->chan_config[ch->channel_id];
+	input = chan_cfg->inputs[ch->input_idx].input;
+	if (input.capabilities != V4L2_IN_CAP_STD)
+		return -ENODATA;
+
+	if (vb2_is_busy(&common->buffer_queue))
+		return -EBUSY;
+
+	/* Call encoder subdevice function to set the standard */
+	ch->video.stdid = std_id;
+	memset(&ch->video.dv_timings, 0, sizeof(ch->video.dv_timings));
+
+	/* Get the information about the standard */
+	if (vpif_update_std_info(ch)) {
+		vpif_err("Error getting the standard info\n");
+		return -EINVAL;
+	}
+
+	/* set standard in the sub device */
+	ret = v4l2_subdev_call(ch->sd, video, s_std, std_id);
+	if (ret && ret != -ENOIOCTLCMD && ret != -ENODEV) {
+		vpif_dbg(1, debug, "Failed to set standard for sub devices\n");
+		return ret;
+	}
+	return 0;
+}
+
+/**
+ * vpif_enum_input() - ENUMINPUT handler
+ * @file: file ptr
+ * @priv: file handle
+ * @input: ptr to input structure
+ */
+static int vpif_enum_input(struct file *file, void *priv,
+				struct v4l2_input *input)
+{
+
+	struct vpif_capture_config *config = vpif_dev->platform_data;
+	struct video_device *vdev = video_devdata(file);
+	struct channel_obj *ch = video_get_drvdata(vdev);
+	struct vpif_capture_chan_config *chan_cfg;
+
+	chan_cfg = &config->chan_config[ch->channel_id];
+
+	if (input->index >= chan_cfg->input_count)
+		return -EINVAL;
+
+	memcpy(input, &chan_cfg->inputs[input->index].input,
+		sizeof(*input));
+	return 0;
+}
+
+/**
+ * vpif_g_input() - Get INPUT handler
+ * @file: file ptr
+ * @priv: file handle
+ * @index: ptr to input index
+ */
+static int vpif_g_input(struct file *file, void *priv, unsigned int *index)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct channel_obj *ch = video_get_drvdata(vdev);
+
+	*index = ch->input_idx;
+	return 0;
+}
+
+/**
+ * vpif_s_input() - Set INPUT handler
+ * @file: file ptr
+ * @priv: file handle
+ * @index: input index
+ */
+static int vpif_s_input(struct file *file, void *priv, unsigned int index)
+{
+	struct vpif_capture_config *config = vpif_dev->platform_data;
+	struct video_device *vdev = video_devdata(file);
+	struct channel_obj *ch = video_get_drvdata(vdev);
+	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
+	struct vpif_capture_chan_config *chan_cfg;
+
+	chan_cfg = &config->chan_config[ch->channel_id];
+
+	if (index >= chan_cfg->input_count)
+		return -EINVAL;
+
+	if (vb2_is_busy(&common->buffer_queue))
+		return -EBUSY;
+
+	return vpif_set_input(config, ch, index);
+}
+
+/**
+ * vpif_enum_fmt_vid_cap() - ENUM_FMT handler
+ * @file: file ptr
+ * @priv: file handle
+ * @index: input index
+ */
+static int vpif_enum_fmt_vid_cap(struct file *file, void  *priv,
+					struct v4l2_fmtdesc *fmt)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct channel_obj *ch = video_get_drvdata(vdev);
+
+	if (fmt->index != 0) {
+		vpif_dbg(1, debug, "Invalid format index\n");
+		return -EINVAL;
+	}
+
+	/* Fill in the information about format */
+	if (ch->vpifparams.iface.if_type == VPIF_IF_RAW_BAYER) {
+		fmt->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+		strcpy(fmt->description, "Raw Mode -Bayer Pattern GrRBGb");
+		fmt->pixelformat = V4L2_PIX_FMT_SBGGR8;
+	} else {
+		fmt->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+		strcpy(fmt->description, "YCbCr4:2:2 YC Planar");
+		fmt->pixelformat = V4L2_PIX_FMT_YUV422P;
+	}
+	return 0;
+}
+
+/**
+ * vpif_try_fmt_vid_cap() - TRY_FMT handler
+ * @file: file ptr
+ * @priv: file handle
+ * @fmt: ptr to v4l2 format structure
+ */
+static int vpif_try_fmt_vid_cap(struct file *file, void *priv,
+				struct v4l2_format *fmt)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct channel_obj *ch = video_get_drvdata(vdev);
+	struct v4l2_pix_format *pixfmt = &fmt->fmt.pix;
+	struct common_obj *common = &(ch->common[VPIF_VIDEO_INDEX]);
+	struct vpif_params *vpif_params = &ch->vpifparams;
+
+	/*
+	 * to supress v4l-compliance warnings silently correct
+	 * the pixelformat
+	 */
+	if (vpif_params->iface.if_type == VPIF_IF_RAW_BAYER) {
+		if (pixfmt->pixelformat != V4L2_PIX_FMT_SBGGR8)
+			pixfmt->pixelformat = V4L2_PIX_FMT_SBGGR8;
+	} else {
+		if (pixfmt->pixelformat != V4L2_PIX_FMT_YUV422P)
+			pixfmt->pixelformat = V4L2_PIX_FMT_YUV422P;
+	}
+
+	common->fmt.fmt.pix.pixelformat = pixfmt->pixelformat;
+
+	vpif_update_std_info(ch);
+
+	pixfmt->field = common->fmt.fmt.pix.field;
+	pixfmt->colorspace = common->fmt.fmt.pix.colorspace;
+	pixfmt->bytesperline = common->fmt.fmt.pix.width;
+	pixfmt->width = common->fmt.fmt.pix.width;
+	pixfmt->height = common->fmt.fmt.pix.height;
+	pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height * 2;
+	pixfmt->priv = 0;
+
+	return 0;
+}
+
+
+/**
+ * vpif_g_fmt_vid_cap() - Set INPUT handler
+ * @file: file ptr
+ * @priv: file handle
+ * @fmt: ptr to v4l2 format structure
+ */
+static int vpif_g_fmt_vid_cap(struct file *file, void *priv,
+				struct v4l2_format *fmt)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct channel_obj *ch = video_get_drvdata(vdev);
+	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
+
+	/* Check the validity of the buffer type */
+	if (common->fmt.type != fmt->type)
+		return -EINVAL;
+
+	/* Fill in the information about format */
+	*fmt = common->fmt;
+	return 0;
+}
+
+/**
+ * vpif_s_fmt_vid_cap() - Set FMT handler
+ * @file: file ptr
+ * @priv: file handle
+ * @fmt: ptr to v4l2 format structure
+ */
+static int vpif_s_fmt_vid_cap(struct file *file, void *priv,
+				struct v4l2_format *fmt)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct channel_obj *ch = video_get_drvdata(vdev);
+	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
+	int ret;
+
+	vpif_dbg(2, debug, "%s\n", __func__);
+
+	if (vb2_is_busy(&common->buffer_queue))
+		return -EBUSY;
+
+	ret = vpif_try_fmt_vid_cap(file, priv, fmt);
+	if (ret)
+		return ret;
+
+	/* store the format in the channel object */
+	common->fmt = *fmt;
+	return 0;
+}
+
+/**
+ * vpif_querycap() - QUERYCAP handler
+ * @file: file ptr
+ * @priv: file handle
+ * @cap: ptr to v4l2_capability structure
+ */
+static int vpif_querycap(struct file *file, void  *priv,
+				struct v4l2_capability *cap)
+{
+	struct vpif_capture_config *config = vpif_dev->platform_data;
+
+	cap->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING;
+	cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS;
+	strlcpy(cap->driver, VPIF_DRIVER_NAME, sizeof(cap->driver));
+	snprintf(cap->bus_info, sizeof(cap->bus_info), "platform:%s",
+		 dev_name(vpif_dev));
+	strlcpy(cap->card, config->card_name, sizeof(cap->card));
+
+	return 0;
+}
+
+/**
+ * vpif_enum_dv_timings() - ENUM_DV_TIMINGS handler
+ * @file: file ptr
+ * @priv: file handle
+ * @timings: input timings
+ */
+static int
+vpif_enum_dv_timings(struct file *file, void *priv,
+		     struct v4l2_enum_dv_timings *timings)
+{
+	struct vpif_capture_config *config = vpif_dev->platform_data;
+	struct video_device *vdev = video_devdata(file);
+	struct channel_obj *ch = video_get_drvdata(vdev);
+	struct vpif_capture_chan_config *chan_cfg;
+	struct v4l2_input input;
+	int ret;
+
+	if (config->chan_config[ch->channel_id].inputs == NULL)
+		return -ENODATA;
+
+	chan_cfg = &config->chan_config[ch->channel_id];
+	input = chan_cfg->inputs[ch->input_idx].input;
+	if (input.capabilities != V4L2_IN_CAP_DV_TIMINGS)
+		return -ENODATA;
+
+	timings->pad = 0;
+
+	ret = v4l2_subdev_call(ch->sd, pad, enum_dv_timings, timings);
+	if (ret == -ENOIOCTLCMD || ret == -ENODEV)
+		return -EINVAL;
+
+	return ret;
+}
+
+/**
+ * vpif_query_dv_timings() - QUERY_DV_TIMINGS handler
+ * @file: file ptr
+ * @priv: file handle
+ * @timings: input timings
+ */
+static int
+vpif_query_dv_timings(struct file *file, void *priv,
+		      struct v4l2_dv_timings *timings)
+{
+	struct vpif_capture_config *config = vpif_dev->platform_data;
+	struct video_device *vdev = video_devdata(file);
+	struct channel_obj *ch = video_get_drvdata(vdev);
+	struct vpif_capture_chan_config *chan_cfg;
+	struct v4l2_input input;
+	int ret;
+
+	if (config->chan_config[ch->channel_id].inputs == NULL)
+		return -ENODATA;
+
+	chan_cfg = &config->chan_config[ch->channel_id];
+	input = chan_cfg->inputs[ch->input_idx].input;
+	if (input.capabilities != V4L2_IN_CAP_DV_TIMINGS)
+		return -ENODATA;
+
+	ret = v4l2_subdev_call(ch->sd, video, query_dv_timings, timings);
+	if (ret == -ENOIOCTLCMD || ret == -ENODEV)
+		return -ENODATA;
+
+	return ret;
+}
+
+/**
+ * vpif_s_dv_timings() - S_DV_TIMINGS handler
+ * @file: file ptr
+ * @priv: file handle
+ * @timings: digital video timings
+ */
+static int vpif_s_dv_timings(struct file *file, void *priv,
+		struct v4l2_dv_timings *timings)
+{
+	struct vpif_capture_config *config = vpif_dev->platform_data;
+	struct video_device *vdev = video_devdata(file);
+	struct channel_obj *ch = video_get_drvdata(vdev);
+	struct vpif_params *vpifparams = &ch->vpifparams;
+	struct vpif_channel_config_params *std_info = &vpifparams->std_info;
+	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
+	struct video_obj *vid_ch = &ch->video;
+	struct v4l2_bt_timings *bt = &vid_ch->dv_timings.bt;
+	struct vpif_capture_chan_config *chan_cfg;
+	struct v4l2_input input;
+	int ret;
+
+	if (config->chan_config[ch->channel_id].inputs == NULL)
+		return -ENODATA;
+
+	chan_cfg = &config->chan_config[ch->channel_id];
+	input = chan_cfg->inputs[ch->input_idx].input;
+	if (input.capabilities != V4L2_IN_CAP_DV_TIMINGS)
+		return -ENODATA;
+
+	if (timings->type != V4L2_DV_BT_656_1120) {
+		vpif_dbg(2, debug, "Timing type not defined\n");
+		return -EINVAL;
+	}
+
+	if (vb2_is_busy(&common->buffer_queue))
+		return -EBUSY;
+
+	/* Configure subdevice timings, if any */
+	ret = v4l2_subdev_call(ch->sd, video, s_dv_timings, timings);
+	if (ret == -ENOIOCTLCMD || ret == -ENODEV)
+		ret = 0;
+	if (ret < 0) {
+		vpif_dbg(2, debug, "Error setting custom DV timings\n");
+		return ret;
+	}
+
+	if (!(timings->bt.width && timings->bt.height &&
+				(timings->bt.hbackporch ||
+				 timings->bt.hfrontporch ||
+				 timings->bt.hsync) &&
+				timings->bt.vfrontporch &&
+				(timings->bt.vbackporch ||
+				 timings->bt.vsync))) {
+		vpif_dbg(2, debug, "Timings for width, height, "
+				"horizontal back porch, horizontal sync, "
+				"horizontal front porch, vertical back porch, "
+				"vertical sync and vertical back porch "
+				"must be defined\n");
+		return -EINVAL;
+	}
+
+	vid_ch->dv_timings = *timings;
+
+	/* Configure video port timings */
+
+	std_info->eav2sav = V4L2_DV_BT_BLANKING_WIDTH(bt) - 8;
+	std_info->sav2eav = bt->width;
+
+	std_info->l1 = 1;
+	std_info->l3 = bt->vsync + bt->vbackporch + 1;
+
+	std_info->vsize = V4L2_DV_BT_FRAME_HEIGHT(bt);
+	if (bt->interlaced) {
+		if (bt->il_vbackporch || bt->il_vfrontporch || bt->il_vsync) {
+			std_info->l5 = std_info->vsize/2 -
+				(bt->vfrontporch - 1);
+			std_info->l7 = std_info->vsize/2 + 1;
+			std_info->l9 = std_info->l7 + bt->il_vsync +
+				bt->il_vbackporch + 1;
+			std_info->l11 = std_info->vsize -
+				(bt->il_vfrontporch - 1);
+		} else {
+			vpif_dbg(2, debug, "Required timing values for "
+					"interlaced BT format missing\n");
+			return -EINVAL;
+		}
+	} else {
+		std_info->l5 = std_info->vsize - (bt->vfrontporch - 1);
+	}
+	strncpy(std_info->name, "Custom timings BT656/1120", VPIF_MAX_NAME);
+	std_info->width = bt->width;
+	std_info->height = bt->height;
+	std_info->frm_fmt = bt->interlaced ? 0 : 1;
+	std_info->ycmux_mode = 0;
+	std_info->capture_format = 0;
+	std_info->vbi_supported = 0;
+	std_info->hd_sd = 1;
+	std_info->stdid = 0;
+
+	vid_ch->stdid = 0;
+	return 0;
+}
+
+/**
+ * vpif_g_dv_timings() - G_DV_TIMINGS handler
+ * @file: file ptr
+ * @priv: file handle
+ * @timings: digital video timings
+ */
+static int vpif_g_dv_timings(struct file *file, void *priv,
+		struct v4l2_dv_timings *timings)
+{
+	struct vpif_capture_config *config = vpif_dev->platform_data;
+	struct video_device *vdev = video_devdata(file);
+	struct channel_obj *ch = video_get_drvdata(vdev);
+	struct video_obj *vid_ch = &ch->video;
+	struct vpif_capture_chan_config *chan_cfg;
+	struct v4l2_input input;
+
+	if (config->chan_config[ch->channel_id].inputs == NULL)
+		return -ENODATA;
+
+	chan_cfg = &config->chan_config[ch->channel_id];
+	input = chan_cfg->inputs[ch->input_idx].input;
+	if (input.capabilities != V4L2_IN_CAP_DV_TIMINGS)
+		return -ENODATA;
+
+	*timings = vid_ch->dv_timings;
+
+	return 0;
+}
+
+/*
+ * vpif_log_status() - Status information
+ * @file: file ptr
+ * @priv: file handle
+ *
+ * Returns zero.
+ */
+static int vpif_log_status(struct file *filep, void *priv)
+{
+	/* status for sub devices */
+	v4l2_device_call_all(&vpif_obj.v4l2_dev, 0, core, log_status);
+
+	return 0;
+}
+
+/* vpif capture ioctl operations */
+static const struct v4l2_ioctl_ops vpif_ioctl_ops = {
+	.vidioc_querycap		= vpif_querycap,
+	.vidioc_enum_fmt_vid_cap	= vpif_enum_fmt_vid_cap,
+	.vidioc_g_fmt_vid_cap		= vpif_g_fmt_vid_cap,
+	.vidioc_s_fmt_vid_cap		= vpif_s_fmt_vid_cap,
+	.vidioc_try_fmt_vid_cap		= vpif_try_fmt_vid_cap,
+
+	.vidioc_enum_input		= vpif_enum_input,
+	.vidioc_s_input			= vpif_s_input,
+	.vidioc_g_input			= vpif_g_input,
+
+	.vidioc_reqbufs			= vb2_ioctl_reqbufs,
+	.vidioc_create_bufs		= vb2_ioctl_create_bufs,
+	.vidioc_querybuf		= vb2_ioctl_querybuf,
+	.vidioc_qbuf			= vb2_ioctl_qbuf,
+	.vidioc_dqbuf			= vb2_ioctl_dqbuf,
+	.vidioc_expbuf			= vb2_ioctl_expbuf,
+	.vidioc_streamon		= vb2_ioctl_streamon,
+	.vidioc_streamoff		= vb2_ioctl_streamoff,
+
+	.vidioc_querystd		= vpif_querystd,
+	.vidioc_s_std			= vpif_s_std,
+	.vidioc_g_std			= vpif_g_std,
+
+	.vidioc_enum_dv_timings		= vpif_enum_dv_timings,
+	.vidioc_query_dv_timings	= vpif_query_dv_timings,
+	.vidioc_s_dv_timings		= vpif_s_dv_timings,
+	.vidioc_g_dv_timings		= vpif_g_dv_timings,
+
+	.vidioc_log_status		= vpif_log_status,
+};
+
+/* vpif file operations */
+static struct v4l2_file_operations vpif_fops = {
+	.owner = THIS_MODULE,
+	.open = v4l2_fh_open,
+	.release = vb2_fop_release,
+	.unlocked_ioctl = video_ioctl2,
+	.mmap = vb2_fop_mmap,
+	.poll = vb2_fop_poll
+};
+
+/**
+ * initialize_vpif() - Initialize vpif data structures
+ *
+ * Allocate memory for data structures and initialize them
+ */
+static int initialize_vpif(void)
+{
+	int err, i, j;
+	int free_channel_objects_index;
+
+	/* Allocate memory for six channel objects */
+	for (i = 0; i < VPIF_CAPTURE_MAX_DEVICES; i++) {
+		vpif_obj.dev[i] =
+		    kzalloc(sizeof(*vpif_obj.dev[i]), GFP_KERNEL);
+		/* If memory allocation fails, return error */
+		if (!vpif_obj.dev[i]) {
+			free_channel_objects_index = i;
+			err = -ENOMEM;
+			goto vpif_init_free_channel_objects;
+		}
+	}
+	return 0;
+
+vpif_init_free_channel_objects:
+	for (j = 0; j < free_channel_objects_index; j++)
+		kfree(vpif_obj.dev[j]);
+	return err;
+}
+
+static int vpif_async_bound(struct v4l2_async_notifier *notifier,
+			    struct v4l2_subdev *subdev,
+			    struct v4l2_async_subdev *asd)
+{
+	int i;
+
+	for (i = 0; i < vpif_obj.config->subdev_count; i++)
+		if (!strcmp(vpif_obj.config->subdev_info[i].name,
+			    subdev->name)) {
+			vpif_obj.sd[i] = subdev;
+			return 0;
+		}
+
+	return -EINVAL;
+}
+
+static int vpif_probe_complete(void)
+{
+	struct common_obj *common;
+	struct video_device *vdev;
+	struct channel_obj *ch;
+	struct vb2_queue *q;
+	int j, err, k;
+
+	for (j = 0; j < VPIF_CAPTURE_MAX_DEVICES; j++) {
+		ch = vpif_obj.dev[j];
+		ch->channel_id = j;
+		common = &(ch->common[VPIF_VIDEO_INDEX]);
+		spin_lock_init(&common->irqlock);
+		mutex_init(&common->lock);
+
+		/* select input 0 */
+		err = vpif_set_input(vpif_obj.config, ch, 0);
+		if (err)
+			goto probe_out;
+
+		/* set initial format */
+		ch->video.stdid = V4L2_STD_525_60;
+		memset(&ch->video.dv_timings, 0, sizeof(ch->video.dv_timings));
+		vpif_update_std_info(ch);
+
+		/* Initialize vb2 queue */
+		q = &common->buffer_queue;
+		q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+		q->io_modes = VB2_MMAP | VB2_USERPTR | VB2_DMABUF;
+		q->drv_priv = ch;
+		q->ops = &video_qops;
+		q->mem_ops = &vb2_dma_contig_memops;
+		q->buf_struct_size = sizeof(struct vpif_cap_buffer);
+		q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
+		q->min_buffers_needed = 1;
+		q->lock = &common->lock;
+
+		err = vb2_queue_init(q);
+		if (err) {
+			vpif_err("vpif_capture: vb2_queue_init() failed\n");
+			goto probe_out;
+		}
+
+		common->alloc_ctx = vb2_dma_contig_init_ctx(vpif_dev);
+		if (IS_ERR(common->alloc_ctx)) {
+			vpif_err("Failed to get the context\n");
+			err = PTR_ERR(common->alloc_ctx);
+			goto probe_out;
+		}
+
+		INIT_LIST_HEAD(&common->dma_queue);
+
+		/* Initialize the video_device structure */
+		vdev = &ch->video_dev;
+		strlcpy(vdev->name, VPIF_DRIVER_NAME, sizeof(vdev->name));
+		vdev->release = video_device_release_empty;
+		vdev->fops = &vpif_fops;
+		vdev->ioctl_ops = &vpif_ioctl_ops;
+		vdev->v4l2_dev = &vpif_obj.v4l2_dev;
+		vdev->vfl_dir = VFL_DIR_RX;
+		vdev->queue = q;
+		vdev->lock = &common->lock;
+		video_set_drvdata(&ch->video_dev, ch);
+		err = video_register_device(vdev,
+					    VFL_TYPE_GRABBER, (j ? 1 : 0));
+		if (err)
+			goto probe_out;
+	}
+
+	v4l2_info(&vpif_obj.v4l2_dev, "VPIF capture driver initialized\n");
+	return 0;
+
+probe_out:
+	for (k = 0; k < j; k++) {
+		/* Get the pointer to the channel object */
+		ch = vpif_obj.dev[k];
+		common = &ch->common[k];
+		vb2_dma_contig_cleanup_ctx(common->alloc_ctx);
+		/* Unregister video device */
+		video_unregister_device(&ch->video_dev);
+	}
+	kfree(vpif_obj.sd);
+	v4l2_device_unregister(&vpif_obj.v4l2_dev);
+
+	return err;
+}
+
+static int vpif_async_complete(struct v4l2_async_notifier *notifier)
+{
+	return vpif_probe_complete();
+}
+
+/**
+ * vpif_probe : This function probes the vpif capture driver
+ * @pdev: platform device pointer
+ *
+ * This creates device entries by register itself to the V4L2 driver and
+ * initializes fields of each channel objects
+ */
+static __init int vpif_probe(struct platform_device *pdev)
+{
+	struct vpif_subdev_info *subdevdata;
+	struct i2c_adapter *i2c_adap;
+	struct resource *res;
+	int subdev_count;
+	int res_idx = 0;
+	int i, err;
+
+	vpif_dev = &pdev->dev;
+
+	err = initialize_vpif();
+	if (err) {
+		v4l2_err(vpif_dev->driver, "Error initializing vpif\n");
+		return err;
+	}
+
+	err = v4l2_device_register(vpif_dev, &vpif_obj.v4l2_dev);
+	if (err) {
+		v4l2_err(vpif_dev->driver, "Error registering v4l2 device\n");
+		return err;
+	}
+
+	while ((res = platform_get_resource(pdev, IORESOURCE_IRQ, res_idx))) {
+		err = devm_request_irq(&pdev->dev, res->start, vpif_channel_isr,
+					IRQF_SHARED, VPIF_DRIVER_NAME,
+					(void *)(&vpif_obj.dev[res_idx]->
+					channel_id));
+		if (err) {
+			err = -EINVAL;
+			goto vpif_unregister;
+		}
+		res_idx++;
+	}
+
+	vpif_obj.config = pdev->dev.platform_data;
+
+	subdev_count = vpif_obj.config->subdev_count;
+	vpif_obj.sd = kzalloc(sizeof(struct v4l2_subdev *) * subdev_count,
+				GFP_KERNEL);
+	if (vpif_obj.sd == NULL) {
+		vpif_err("unable to allocate memory for subdevice pointers\n");
+		err = -ENOMEM;
+		goto vpif_unregister;
+	}
+
+	if (!vpif_obj.config->asd_sizes) {
+		i2c_adap = i2c_get_adapter(1);
+		for (i = 0; i < subdev_count; i++) {
+			subdevdata = &vpif_obj.config->subdev_info[i];
+			vpif_obj.sd[i] =
+				v4l2_i2c_new_subdev_board(&vpif_obj.v4l2_dev,
+							  i2c_adap,
+							  &subdevdata->
+							  board_info,
+							  NULL);
+
+			if (!vpif_obj.sd[i]) {
+				vpif_err("Error registering v4l2 subdevice\n");
+				err = -ENODEV;
+				goto probe_subdev_out;
+			}
+			v4l2_info(&vpif_obj.v4l2_dev,
+				  "registered sub device %s\n",
+				   subdevdata->name);
+		}
+		vpif_probe_complete();
+	} else {
+		vpif_obj.notifier.subdevs = vpif_obj.config->asd;
+		vpif_obj.notifier.num_subdevs = vpif_obj.config->asd_sizes[0];
+		vpif_obj.notifier.bound = vpif_async_bound;
+		vpif_obj.notifier.complete = vpif_async_complete;
+		err = v4l2_async_notifier_register(&vpif_obj.v4l2_dev,
+						   &vpif_obj.notifier);
+		if (err) {
+			vpif_err("Error registering async notifier\n");
+			err = -EINVAL;
+			goto probe_subdev_out;
+		}
+	}
+
+	return 0;
+
+probe_subdev_out:
+	/* free sub devices memory */
+	kfree(vpif_obj.sd);
+vpif_unregister:
+	v4l2_device_unregister(&vpif_obj.v4l2_dev);
+
+	return err;
+}
+
+/**
+ * vpif_remove() - driver remove handler
+ * @device: ptr to platform device structure
+ *
+ * The vidoe device is unregistered
+ */
+static int vpif_remove(struct platform_device *device)
+{
+	struct common_obj *common;
+	struct channel_obj *ch;
+	int i;
+
+	v4l2_device_unregister(&vpif_obj.v4l2_dev);
+
+	kfree(vpif_obj.sd);
+	/* un-register device */
+	for (i = 0; i < VPIF_CAPTURE_MAX_DEVICES; i++) {
+		/* Get the pointer to the channel object */
+		ch = vpif_obj.dev[i];
+		common = &ch->common[VPIF_VIDEO_INDEX];
+		vb2_dma_contig_cleanup_ctx(common->alloc_ctx);
+		/* Unregister video device */
+		video_unregister_device(&ch->video_dev);
+		kfree(vpif_obj.dev[i]);
+	}
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+/**
+ * vpif_suspend: vpif device suspend
+ */
+static int vpif_suspend(struct device *dev)
+{
+
+	struct common_obj *common;
+	struct channel_obj *ch;
+	int i;
+
+	for (i = 0; i < VPIF_CAPTURE_MAX_DEVICES; i++) {
+		/* Get the pointer to the channel object */
+		ch = vpif_obj.dev[i];
+		common = &ch->common[VPIF_VIDEO_INDEX];
+
+		if (!vb2_start_streaming_called(&common->buffer_queue))
+			continue;
+
+		mutex_lock(&common->lock);
+		/* Disable channel */
+		if (ch->channel_id == VPIF_CHANNEL0_VIDEO) {
+			enable_channel0(0);
+			channel0_intr_enable(0);
+		}
+		if (ch->channel_id == VPIF_CHANNEL1_VIDEO ||
+			ycmux_mode == 2) {
+			enable_channel1(0);
+			channel1_intr_enable(0);
+		}
+		mutex_unlock(&common->lock);
+	}
+
+	return 0;
+}
+
+/*
+ * vpif_resume: vpif device suspend
+ */
+static int vpif_resume(struct device *dev)
+{
+	struct common_obj *common;
+	struct channel_obj *ch;
+	int i;
+
+	for (i = 0; i < VPIF_CAPTURE_MAX_DEVICES; i++) {
+		/* Get the pointer to the channel object */
+		ch = vpif_obj.dev[i];
+		common = &ch->common[VPIF_VIDEO_INDEX];
+
+		if (!vb2_start_streaming_called(&common->buffer_queue))
+			continue;
+
+		mutex_lock(&common->lock);
+		/* Enable channel */
+		if (ch->channel_id == VPIF_CHANNEL0_VIDEO) {
+			enable_channel0(1);
+			channel0_intr_enable(1);
+		}
+		if (ch->channel_id == VPIF_CHANNEL1_VIDEO ||
+			ycmux_mode == 2) {
+			enable_channel1(1);
+			channel1_intr_enable(1);
+		}
+		mutex_unlock(&common->lock);
+	}
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(vpif_pm_ops, vpif_suspend, vpif_resume);
+
+static __refdata struct platform_driver vpif_driver = {
+	.driver	= {
+		.name	= VPIF_DRIVER_NAME,
+		.pm	= &vpif_pm_ops,
+	},
+	.probe = vpif_probe,
+	.remove = vpif_remove,
+};
+
+module_platform_driver(vpif_driver);
diff --git a/drivers/media/platform/davinci/vpif_capture.h b/drivers/media/platform/davinci/vpif_capture.h
new file mode 100644
index 000000000..8b8a663f6
--- /dev/null
+++ b/drivers/media/platform/davinci/vpif_capture.h
@@ -0,0 +1,122 @@
+/*
+ * Copyright (C) 2009 Texas Instruments Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef VPIF_CAPTURE_H
+#define VPIF_CAPTURE_H
+
+/* Header files */
+#include <media/videobuf2-dma-contig.h>
+#include <media/v4l2-device.h>
+
+#include "vpif.h"
+
+/* Macros */
+#define VPIF_CAPTURE_VERSION		"0.0.2"
+
+#define VPIF_VALID_FIELD(field)		(((V4L2_FIELD_ANY == field) || \
+	(V4L2_FIELD_NONE == field)) || \
+	(((V4L2_FIELD_INTERLACED == field) || \
+	(V4L2_FIELD_SEQ_TB == field)) || \
+	(V4L2_FIELD_SEQ_BT == field)))
+
+#define VPIF_CAPTURE_MAX_DEVICES	2
+#define VPIF_VIDEO_INDEX		0
+#define VPIF_NUMBER_OF_OBJECTS		1
+
+/* Enumerated data type to give id to each device per channel */
+enum vpif_channel_id {
+	VPIF_CHANNEL0_VIDEO = 0,
+	VPIF_CHANNEL1_VIDEO,
+};
+
+struct video_obj {
+	enum v4l2_field buf_field;
+	/* Currently selected or default standard */
+	v4l2_std_id stdid;
+	struct v4l2_dv_timings dv_timings;
+};
+
+struct vpif_cap_buffer {
+	struct vb2_buffer vb;
+	struct list_head list;
+};
+
+struct common_obj {
+	/* Pointer pointing to current v4l2_buffer */
+	struct vpif_cap_buffer *cur_frm;
+	/* Pointer pointing to current v4l2_buffer */
+	struct vpif_cap_buffer *next_frm;
+	/* Used to store pixel format */
+	struct v4l2_format fmt;
+	/* Buffer queue used in video-buf */
+	struct vb2_queue buffer_queue;
+	/* allocator-specific contexts for each plane */
+	struct vb2_alloc_ctx *alloc_ctx;
+	/* Queue of filled frames */
+	struct list_head dma_queue;
+	/* Used in video-buf */
+	spinlock_t irqlock;
+	/* lock used to access this structure */
+	struct mutex lock;
+	/* Function pointer to set the addresses */
+	void (*set_addr) (unsigned long, unsigned long, unsigned long,
+			  unsigned long);
+	/* offset where Y top starts from the starting of the buffer */
+	u32 ytop_off;
+	/* offset where Y bottom starts from the starting of the buffer */
+	u32 ybtm_off;
+	/* offset where C top starts from the starting of the buffer */
+	u32 ctop_off;
+	/* offset where C bottom starts from the starting of the buffer */
+	u32 cbtm_off;
+	/* Indicates width of the image data */
+	u32 width;
+	/* Indicates height of the image data */
+	u32 height;
+};
+
+struct channel_obj {
+	/* Identifies video device for this channel */
+	struct video_device video_dev;
+	/* Indicates id of the field which is being displayed */
+	u32 field_id;
+	/* flag to indicate whether decoder is initialized */
+	u8 initialized;
+	/* Identifies channel */
+	enum vpif_channel_id channel_id;
+	/* Current input */
+	u32 input_idx;
+	/* subdev corresponding to the current input, may be NULL */
+	struct v4l2_subdev *sd;
+	/* vpif configuration params */
+	struct vpif_params vpifparams;
+	/* common object array */
+	struct common_obj common[VPIF_NUMBER_OF_OBJECTS];
+	/* video object */
+	struct video_obj video;
+};
+
+struct vpif_device {
+	struct v4l2_device v4l2_dev;
+	struct channel_obj *dev[VPIF_CAPTURE_NUM_CHANNELS];
+	struct v4l2_subdev **sd;
+	struct v4l2_async_notifier notifier;
+	struct vpif_capture_config *config;
+};
+
+#endif				/* VPIF_CAPTURE_H */
diff --git a/drivers/media/platform/davinci/vpif_display.c b/drivers/media/platform/davinci/vpif_display.c
new file mode 100644
index 000000000..682e5d578
--- /dev/null
+++ b/drivers/media/platform/davinci/vpif_display.c
@@ -0,0 +1,1437 @@
+/*
+ * vpif-display - VPIF display driver
+ * Display driver for TI DaVinci VPIF
+ *
+ * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2014 Lad, Prabhakar <prabhakar.csengg@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed .as is. WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <media/v4l2-ioctl.h>
+
+#include "vpif.h"
+#include "vpif_display.h"
+
+MODULE_DESCRIPTION("TI DaVinci VPIF Display driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(VPIF_DISPLAY_VERSION);
+
+#define VPIF_V4L2_STD (V4L2_STD_525_60 | V4L2_STD_625_50)
+
+#define vpif_err(fmt, arg...)	v4l2_err(&vpif_obj.v4l2_dev, fmt, ## arg)
+#define vpif_dbg(level, debug, fmt, arg...)	\
+		v4l2_dbg(level, debug, &vpif_obj.v4l2_dev, fmt, ## arg)
+
+static int debug = 1;
+
+module_param(debug, int, 0644);
+
+MODULE_PARM_DESC(debug, "Debug level 0-1");
+
+#define VPIF_DRIVER_NAME	"vpif_display"
+
+/* Is set to 1 in case of SDTV formats, 2 in case of HDTV formats. */
+static int ycmux_mode;
+
+static u8 channel_first_int[VPIF_NUMOBJECTS][2] = { {1, 1} };
+
+static struct vpif_device vpif_obj = { {NULL} };
+static struct device *vpif_dev;
+static void vpif_calculate_offsets(struct channel_obj *ch);
+static void vpif_config_addr(struct channel_obj *ch, int muxmode);
+
+static inline struct vpif_disp_buffer *to_vpif_buffer(struct vb2_buffer *vb)
+{
+	return container_of(vb, struct vpif_disp_buffer, vb);
+}
+
+/**
+ * vpif_buffer_prepare :  callback function for buffer prepare
+ * @vb: ptr to vb2_buffer
+ *
+ * This is the callback function for buffer prepare when vb2_qbuf()
+ * function is called. The buffer is prepared and user space virtual address
+ * or user address is converted into  physical address
+ */
+static int vpif_buffer_prepare(struct vb2_buffer *vb)
+{
+	struct channel_obj *ch = vb2_get_drv_priv(vb->vb2_queue);
+	struct common_obj *common;
+
+	common = &ch->common[VPIF_VIDEO_INDEX];
+
+	vb2_set_plane_payload(vb, 0, common->fmt.fmt.pix.sizeimage);
+	if (vb2_get_plane_payload(vb, 0) > vb2_plane_size(vb, 0))
+		return -EINVAL;
+
+	vb->v4l2_buf.field = common->fmt.fmt.pix.field;
+
+	if (vb->vb2_queue->type != V4L2_BUF_TYPE_SLICED_VBI_OUTPUT) {
+		unsigned long addr = vb2_dma_contig_plane_dma_addr(vb, 0);
+
+		if (!ISALIGNED(addr + common->ytop_off) ||
+			!ISALIGNED(addr + common->ybtm_off) ||
+			!ISALIGNED(addr + common->ctop_off) ||
+			!ISALIGNED(addr + common->cbtm_off)) {
+			vpif_err("buffer offset not aligned to 8 bytes\n");
+			return -EINVAL;
+		}
+	}
+
+	return 0;
+}
+
+/**
+ * vpif_buffer_queue_setup : Callback function for buffer setup.
+ * @vq: vb2_queue ptr
+ * @fmt: v4l2 format
+ * @nbuffers: ptr to number of buffers requested by application
+ * @nplanes:: contains number of distinct video planes needed to hold a frame
+ * @sizes[]: contains the size (in bytes) of each plane.
+ * @alloc_ctxs: ptr to allocation context
+ *
+ * This callback function is called when reqbuf() is called to adjust
+ * the buffer count and buffer size
+ */
+static int vpif_buffer_queue_setup(struct vb2_queue *vq,
+				const struct v4l2_format *fmt,
+				unsigned int *nbuffers, unsigned int *nplanes,
+				unsigned int sizes[], void *alloc_ctxs[])
+{
+	struct channel_obj *ch = vb2_get_drv_priv(vq);
+	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
+
+	if (fmt && fmt->fmt.pix.sizeimage < common->fmt.fmt.pix.sizeimage)
+		return -EINVAL;
+
+	if (vq->num_buffers + *nbuffers < 3)
+		*nbuffers = 3 - vq->num_buffers;
+
+	*nplanes = 1;
+	sizes[0] = fmt ? fmt->fmt.pix.sizeimage : common->fmt.fmt.pix.sizeimage;
+	alloc_ctxs[0] = common->alloc_ctx;
+
+	/* Calculate the offset for Y and C data  in the buffer */
+	vpif_calculate_offsets(ch);
+
+	return 0;
+}
+
+/**
+ * vpif_buffer_queue : Callback function to add buffer to DMA queue
+ * @vb: ptr to vb2_buffer
+ *
+ * This callback fucntion queues the buffer to DMA engine
+ */
+static void vpif_buffer_queue(struct vb2_buffer *vb)
+{
+	struct vpif_disp_buffer *buf = to_vpif_buffer(vb);
+	struct channel_obj *ch = vb2_get_drv_priv(vb->vb2_queue);
+	struct common_obj *common;
+	unsigned long flags;
+
+	common = &ch->common[VPIF_VIDEO_INDEX];
+
+	/* add the buffer to the DMA queue */
+	spin_lock_irqsave(&common->irqlock, flags);
+	list_add_tail(&buf->list, &common->dma_queue);
+	spin_unlock_irqrestore(&common->irqlock, flags);
+}
+
+/**
+ * vpif_start_streaming : Starts the DMA engine for streaming
+ * @vb: ptr to vb2_buffer
+ * @count: number of buffers
+ */
+static int vpif_start_streaming(struct vb2_queue *vq, unsigned int count)
+{
+	struct vpif_display_config *vpif_config_data =
+					vpif_dev->platform_data;
+	struct channel_obj *ch = vb2_get_drv_priv(vq);
+	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
+	struct vpif_params *vpif = &ch->vpifparams;
+	struct vpif_disp_buffer *buf, *tmp;
+	unsigned long addr, flags;
+	int ret;
+
+	spin_lock_irqsave(&common->irqlock, flags);
+
+	/* Initialize field_id */
+	ch->field_id = 0;
+
+	/* clock settings */
+	if (vpif_config_data->set_clock) {
+		ret = vpif_config_data->set_clock(ch->vpifparams.std_info.
+		ycmux_mode, ch->vpifparams.std_info.hd_sd);
+		if (ret < 0) {
+			vpif_err("can't set clock\n");
+			goto err;
+		}
+	}
+
+	/* set the parameters and addresses */
+	ret = vpif_set_video_params(vpif, ch->channel_id + 2);
+	if (ret < 0)
+		goto err;
+
+	ycmux_mode = ret;
+	vpif_config_addr(ch, ret);
+	/* Get the next frame from the buffer queue */
+	common->next_frm = common->cur_frm =
+			    list_entry(common->dma_queue.next,
+				       struct vpif_disp_buffer, list);
+
+	list_del(&common->cur_frm->list);
+	spin_unlock_irqrestore(&common->irqlock, flags);
+
+	addr = vb2_dma_contig_plane_dma_addr(&common->cur_frm->vb, 0);
+	common->set_addr((addr + common->ytop_off),
+			    (addr + common->ybtm_off),
+			    (addr + common->ctop_off),
+			    (addr + common->cbtm_off));
+
+	/*
+	 * Set interrupt for both the fields in VPIF
+	 * Register enable channel in VPIF register
+	 */
+	channel_first_int[VPIF_VIDEO_INDEX][ch->channel_id] = 1;
+	if (VPIF_CHANNEL2_VIDEO == ch->channel_id) {
+		channel2_intr_assert();
+		channel2_intr_enable(1);
+		enable_channel2(1);
+		if (vpif_config_data->chan_config[VPIF_CHANNEL2_VIDEO].clip_en)
+			channel2_clipping_enable(1);
+	}
+
+	if (VPIF_CHANNEL3_VIDEO == ch->channel_id || ycmux_mode == 2) {
+		channel3_intr_assert();
+		channel3_intr_enable(1);
+		enable_channel3(1);
+		if (vpif_config_data->chan_config[VPIF_CHANNEL3_VIDEO].clip_en)
+			channel3_clipping_enable(1);
+	}
+
+	return 0;
+
+err:
+	list_for_each_entry_safe(buf, tmp, &common->dma_queue, list) {
+		list_del(&buf->list);
+		vb2_buffer_done(&buf->vb, VB2_BUF_STATE_QUEUED);
+	}
+	spin_unlock_irqrestore(&common->irqlock, flags);
+
+	return ret;
+}
+
+/**
+ * vpif_stop_streaming : Stop the DMA engine
+ * @vq: ptr to vb2_queue
+ *
+ * This callback stops the DMA engine and any remaining buffers
+ * in the DMA queue are released.
+ */
+static void vpif_stop_streaming(struct vb2_queue *vq)
+{
+	struct channel_obj *ch = vb2_get_drv_priv(vq);
+	struct common_obj *common;
+	unsigned long flags;
+
+	common = &ch->common[VPIF_VIDEO_INDEX];
+
+	/* Disable channel */
+	if (VPIF_CHANNEL2_VIDEO == ch->channel_id) {
+		enable_channel2(0);
+		channel2_intr_enable(0);
+	}
+	if (VPIF_CHANNEL3_VIDEO == ch->channel_id || ycmux_mode == 2) {
+		enable_channel3(0);
+		channel3_intr_enable(0);
+	}
+
+	/* release all active buffers */
+	spin_lock_irqsave(&common->irqlock, flags);
+	if (common->cur_frm == common->next_frm) {
+		vb2_buffer_done(&common->cur_frm->vb, VB2_BUF_STATE_ERROR);
+	} else {
+		if (common->cur_frm != NULL)
+			vb2_buffer_done(&common->cur_frm->vb,
+					VB2_BUF_STATE_ERROR);
+		if (common->next_frm != NULL)
+			vb2_buffer_done(&common->next_frm->vb,
+					VB2_BUF_STATE_ERROR);
+	}
+
+	while (!list_empty(&common->dma_queue)) {
+		common->next_frm = list_entry(common->dma_queue.next,
+						struct vpif_disp_buffer, list);
+		list_del(&common->next_frm->list);
+		vb2_buffer_done(&common->next_frm->vb, VB2_BUF_STATE_ERROR);
+	}
+	spin_unlock_irqrestore(&common->irqlock, flags);
+}
+
+static struct vb2_ops video_qops = {
+	.queue_setup		= vpif_buffer_queue_setup,
+	.wait_prepare		= vb2_ops_wait_prepare,
+	.wait_finish		= vb2_ops_wait_finish,
+	.buf_prepare		= vpif_buffer_prepare,
+	.start_streaming	= vpif_start_streaming,
+	.stop_streaming		= vpif_stop_streaming,
+	.buf_queue		= vpif_buffer_queue,
+};
+
+static void process_progressive_mode(struct common_obj *common)
+{
+	unsigned long addr = 0;
+
+	spin_lock(&common->irqlock);
+	/* Get the next buffer from buffer queue */
+	common->next_frm = list_entry(common->dma_queue.next,
+				struct vpif_disp_buffer, list);
+	/* Remove that buffer from the buffer queue */
+	list_del(&common->next_frm->list);
+	spin_unlock(&common->irqlock);
+
+	/* Set top and bottom field addrs in VPIF registers */
+	addr = vb2_dma_contig_plane_dma_addr(&common->next_frm->vb, 0);
+	common->set_addr(addr + common->ytop_off,
+				 addr + common->ybtm_off,
+				 addr + common->ctop_off,
+				 addr + common->cbtm_off);
+}
+
+static void process_interlaced_mode(int fid, struct common_obj *common)
+{
+	/* device field id and local field id are in sync */
+	/* If this is even field */
+	if (0 == fid) {
+		if (common->cur_frm == common->next_frm)
+			return;
+
+		/* one frame is displayed If next frame is
+		 *  available, release cur_frm and move on */
+		/* Copy frame display time */
+		v4l2_get_timestamp(&common->cur_frm->vb.v4l2_buf.timestamp);
+		/* Change status of the cur_frm */
+		vb2_buffer_done(&common->cur_frm->vb,
+					    VB2_BUF_STATE_DONE);
+		/* Make cur_frm pointing to next_frm */
+		common->cur_frm = common->next_frm;
+
+	} else if (1 == fid) {	/* odd field */
+		spin_lock(&common->irqlock);
+		if (list_empty(&common->dma_queue)
+		    || (common->cur_frm != common->next_frm)) {
+			spin_unlock(&common->irqlock);
+			return;
+		}
+		spin_unlock(&common->irqlock);
+		/* one field is displayed configure the next
+		 * frame if it is available else hold on current
+		 * frame */
+		/* Get next from the buffer queue */
+		process_progressive_mode(common);
+	}
+}
+
+/*
+ * vpif_channel_isr: It changes status of the displayed buffer, takes next
+ * buffer from the queue and sets its address in VPIF registers
+ */
+static irqreturn_t vpif_channel_isr(int irq, void *dev_id)
+{
+	struct vpif_device *dev = &vpif_obj;
+	struct channel_obj *ch;
+	struct common_obj *common;
+	int fid = -1, i;
+	int channel_id = 0;
+
+	channel_id = *(int *)(dev_id);
+	if (!vpif_intr_status(channel_id + 2))
+		return IRQ_NONE;
+
+	ch = dev->dev[channel_id];
+	for (i = 0; i < VPIF_NUMOBJECTS; i++) {
+		common = &ch->common[i];
+		/* If streaming is started in this channel */
+
+		if (1 == ch->vpifparams.std_info.frm_fmt) {
+			spin_lock(&common->irqlock);
+			if (list_empty(&common->dma_queue)) {
+				spin_unlock(&common->irqlock);
+				continue;
+			}
+			spin_unlock(&common->irqlock);
+
+			/* Progressive mode */
+			if (!channel_first_int[i][channel_id]) {
+				/* Mark status of the cur_frm to
+				 * done and unlock semaphore on it */
+				v4l2_get_timestamp(&common->cur_frm->vb.
+						   v4l2_buf.timestamp);
+				vb2_buffer_done(&common->cur_frm->vb,
+					    VB2_BUF_STATE_DONE);
+				/* Make cur_frm pointing to next_frm */
+				common->cur_frm = common->next_frm;
+			}
+
+			channel_first_int[i][channel_id] = 0;
+			process_progressive_mode(common);
+		} else {
+			/* Interlaced mode */
+			/* If it is first interrupt, ignore it */
+
+			if (channel_first_int[i][channel_id]) {
+				channel_first_int[i][channel_id] = 0;
+				continue;
+			}
+
+			if (0 == i) {
+				ch->field_id ^= 1;
+				/* Get field id from VPIF registers */
+				fid = vpif_channel_getfid(ch->channel_id + 2);
+				/* If fid does not match with stored field id */
+				if (fid != ch->field_id) {
+					/* Make them in sync */
+					if (0 == fid)
+						ch->field_id = fid;
+
+					return IRQ_HANDLED;
+				}
+			}
+			process_interlaced_mode(fid, common);
+		}
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int vpif_update_std_info(struct channel_obj *ch)
+{
+	struct video_obj *vid_ch = &ch->video;
+	struct vpif_params *vpifparams = &ch->vpifparams;
+	struct vpif_channel_config_params *std_info = &vpifparams->std_info;
+	const struct vpif_channel_config_params *config;
+
+	int i;
+
+	for (i = 0; i < vpif_ch_params_count; i++) {
+		config = &vpif_ch_params[i];
+		if (config->hd_sd == 0) {
+			vpif_dbg(2, debug, "SD format\n");
+			if (config->stdid & vid_ch->stdid) {
+				memcpy(std_info, config, sizeof(*config));
+				break;
+			}
+		}
+	}
+
+	if (i == vpif_ch_params_count) {
+		vpif_dbg(1, debug, "Format not found\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int vpif_update_resolution(struct channel_obj *ch)
+{
+	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
+	struct video_obj *vid_ch = &ch->video;
+	struct vpif_params *vpifparams = &ch->vpifparams;
+	struct vpif_channel_config_params *std_info = &vpifparams->std_info;
+
+	if (!vid_ch->stdid && !vid_ch->dv_timings.bt.height)
+		return -EINVAL;
+
+	if (vid_ch->stdid) {
+		if (vpif_update_std_info(ch))
+			return -EINVAL;
+	}
+
+	common->fmt.fmt.pix.pixelformat = V4L2_PIX_FMT_YUV422P;
+	common->fmt.fmt.pix.width = std_info->width;
+	common->fmt.fmt.pix.height = std_info->height;
+	vpif_dbg(1, debug, "Pixel details: Width = %d,Height = %d\n",
+			common->fmt.fmt.pix.width, common->fmt.fmt.pix.height);
+
+	/* Set height and width paramateres */
+	common->height = std_info->height;
+	common->width = std_info->width;
+	common->fmt.fmt.pix.sizeimage = common->height * common->width * 2;
+
+	if (vid_ch->stdid)
+		common->fmt.fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M;
+	else
+		common->fmt.fmt.pix.colorspace = V4L2_COLORSPACE_REC709;
+
+	if (ch->vpifparams.std_info.frm_fmt)
+		common->fmt.fmt.pix.field = V4L2_FIELD_NONE;
+	else
+		common->fmt.fmt.pix.field = V4L2_FIELD_INTERLACED;
+
+	return 0;
+}
+
+/*
+ * vpif_calculate_offsets: This function calculates buffers offset for Y and C
+ * in the top and bottom field
+ */
+static void vpif_calculate_offsets(struct channel_obj *ch)
+{
+	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
+	struct vpif_params *vpifparams = &ch->vpifparams;
+	enum v4l2_field field = common->fmt.fmt.pix.field;
+	struct video_obj *vid_ch = &ch->video;
+	unsigned int hpitch, sizeimage;
+
+	if (V4L2_FIELD_ANY == common->fmt.fmt.pix.field) {
+		if (ch->vpifparams.std_info.frm_fmt)
+			vid_ch->buf_field = V4L2_FIELD_NONE;
+		else
+			vid_ch->buf_field = V4L2_FIELD_INTERLACED;
+	} else {
+		vid_ch->buf_field = common->fmt.fmt.pix.field;
+	}
+
+	sizeimage = common->fmt.fmt.pix.sizeimage;
+
+	hpitch = common->fmt.fmt.pix.bytesperline;
+	if ((V4L2_FIELD_NONE == vid_ch->buf_field) ||
+	    (V4L2_FIELD_INTERLACED == vid_ch->buf_field)) {
+		common->ytop_off = 0;
+		common->ybtm_off = hpitch;
+		common->ctop_off = sizeimage / 2;
+		common->cbtm_off = sizeimage / 2 + hpitch;
+	} else if (V4L2_FIELD_SEQ_TB == vid_ch->buf_field) {
+		common->ytop_off = 0;
+		common->ybtm_off = sizeimage / 4;
+		common->ctop_off = sizeimage / 2;
+		common->cbtm_off = common->ctop_off + sizeimage / 4;
+	} else if (V4L2_FIELD_SEQ_BT == vid_ch->buf_field) {
+		common->ybtm_off = 0;
+		common->ytop_off = sizeimage / 4;
+		common->cbtm_off = sizeimage / 2;
+		common->ctop_off = common->cbtm_off + sizeimage / 4;
+	}
+
+	if ((V4L2_FIELD_NONE == vid_ch->buf_field) ||
+	    (V4L2_FIELD_INTERLACED == vid_ch->buf_field)) {
+		vpifparams->video_params.storage_mode = 1;
+	} else {
+		vpifparams->video_params.storage_mode = 0;
+	}
+
+	if (ch->vpifparams.std_info.frm_fmt == 1) {
+		vpifparams->video_params.hpitch =
+		    common->fmt.fmt.pix.bytesperline;
+	} else {
+		if ((field == V4L2_FIELD_ANY) ||
+			(field == V4L2_FIELD_INTERLACED))
+			vpifparams->video_params.hpitch =
+			    common->fmt.fmt.pix.bytesperline * 2;
+		else
+			vpifparams->video_params.hpitch =
+			    common->fmt.fmt.pix.bytesperline;
+	}
+
+	ch->vpifparams.video_params.stdid = ch->vpifparams.std_info.stdid;
+}
+
+static void vpif_config_addr(struct channel_obj *ch, int muxmode)
+{
+	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
+
+	if (VPIF_CHANNEL3_VIDEO == ch->channel_id) {
+		common->set_addr = ch3_set_videobuf_addr;
+	} else {
+		if (2 == muxmode)
+			common->set_addr = ch2_set_videobuf_addr_yc_nmux;
+		else
+			common->set_addr = ch2_set_videobuf_addr;
+	}
+}
+
+/* functions implementing ioctls */
+/**
+ * vpif_querycap() - QUERYCAP handler
+ * @file: file ptr
+ * @priv: file handle
+ * @cap: ptr to v4l2_capability structure
+ */
+static int vpif_querycap(struct file *file, void  *priv,
+				struct v4l2_capability *cap)
+{
+	struct vpif_display_config *config = vpif_dev->platform_data;
+
+	cap->device_caps = V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_STREAMING;
+	cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS;
+	strlcpy(cap->driver, VPIF_DRIVER_NAME, sizeof(cap->driver));
+	snprintf(cap->bus_info, sizeof(cap->bus_info), "platform:%s",
+		 dev_name(vpif_dev));
+	strlcpy(cap->card, config->card_name, sizeof(cap->card));
+
+	return 0;
+}
+
+static int vpif_enum_fmt_vid_out(struct file *file, void  *priv,
+					struct v4l2_fmtdesc *fmt)
+{
+	if (fmt->index != 0)
+		return -EINVAL;
+
+	/* Fill in the information about format */
+	fmt->type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
+	strcpy(fmt->description, "YCbCr4:2:2 YC Planar");
+	fmt->pixelformat = V4L2_PIX_FMT_YUV422P;
+	fmt->flags = 0;
+	return 0;
+}
+
+static int vpif_g_fmt_vid_out(struct file *file, void *priv,
+				struct v4l2_format *fmt)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct channel_obj *ch = video_get_drvdata(vdev);
+	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
+
+	/* Check the validity of the buffer type */
+	if (common->fmt.type != fmt->type)
+		return -EINVAL;
+
+	if (vpif_update_resolution(ch))
+		return -EINVAL;
+	*fmt = common->fmt;
+	return 0;
+}
+
+static int vpif_try_fmt_vid_out(struct file *file, void *priv,
+				struct v4l2_format *fmt)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct channel_obj *ch = video_get_drvdata(vdev);
+	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
+	struct v4l2_pix_format *pixfmt = &fmt->fmt.pix;
+
+	/*
+	 * to supress v4l-compliance warnings silently correct
+	 * the pixelformat
+	 */
+	if (pixfmt->pixelformat != V4L2_PIX_FMT_YUV422P)
+		pixfmt->pixelformat = common->fmt.fmt.pix.pixelformat;
+
+	if (vpif_update_resolution(ch))
+		return -EINVAL;
+
+	pixfmt->colorspace = common->fmt.fmt.pix.colorspace;
+	pixfmt->field = common->fmt.fmt.pix.field;
+	pixfmt->bytesperline = common->fmt.fmt.pix.width;
+	pixfmt->width = common->fmt.fmt.pix.width;
+	pixfmt->height = common->fmt.fmt.pix.height;
+	pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height * 2;
+
+	return 0;
+}
+
+static int vpif_s_fmt_vid_out(struct file *file, void *priv,
+				struct v4l2_format *fmt)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct channel_obj *ch = video_get_drvdata(vdev);
+	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
+	struct v4l2_pix_format *pixfmt = &fmt->fmt.pix;
+	int ret;
+
+	if (vb2_is_busy(&common->buffer_queue))
+		return -EBUSY;
+
+	ret = vpif_try_fmt_vid_out(file, priv, fmt);
+	if (ret)
+		return ret;
+
+	/* store the pix format in the channel object */
+	common->fmt.fmt.pix = *pixfmt;
+
+	/* store the format in the channel object */
+	common->fmt = *fmt;
+	return 0;
+}
+
+static int vpif_s_std(struct file *file, void *priv, v4l2_std_id std_id)
+{
+	struct vpif_display_config *config = vpif_dev->platform_data;
+	struct video_device *vdev = video_devdata(file);
+	struct channel_obj *ch = video_get_drvdata(vdev);
+	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
+	struct vpif_display_chan_config *chan_cfg;
+	struct v4l2_output output;
+	int ret;
+
+	if (config->chan_config[ch->channel_id].outputs == NULL)
+		return -ENODATA;
+
+	chan_cfg = &config->chan_config[ch->channel_id];
+	output = chan_cfg->outputs[ch->output_idx].output;
+	if (output.capabilities != V4L2_OUT_CAP_STD)
+		return -ENODATA;
+
+	if (vb2_is_busy(&common->buffer_queue))
+		return -EBUSY;
+
+
+	if (!(std_id & VPIF_V4L2_STD))
+		return -EINVAL;
+
+	/* Call encoder subdevice function to set the standard */
+	ch->video.stdid = std_id;
+	memset(&ch->video.dv_timings, 0, sizeof(ch->video.dv_timings));
+	/* Get the information about the standard */
+	if (vpif_update_resolution(ch))
+		return -EINVAL;
+
+	common->fmt.fmt.pix.bytesperline = common->fmt.fmt.pix.width;
+
+	ret = v4l2_device_call_until_err(&vpif_obj.v4l2_dev, 1, video,
+						s_std_output, std_id);
+	if (ret < 0) {
+		vpif_err("Failed to set output standard\n");
+		return ret;
+	}
+
+	ret = v4l2_device_call_until_err(&vpif_obj.v4l2_dev, 1, video,
+							s_std, std_id);
+	if (ret < 0)
+		vpif_err("Failed to set standard for sub devices\n");
+	return ret;
+}
+
+static int vpif_g_std(struct file *file, void *priv, v4l2_std_id *std)
+{
+	struct vpif_display_config *config = vpif_dev->platform_data;
+	struct video_device *vdev = video_devdata(file);
+	struct channel_obj *ch = video_get_drvdata(vdev);
+	struct vpif_display_chan_config *chan_cfg;
+	struct v4l2_output output;
+
+	if (config->chan_config[ch->channel_id].outputs == NULL)
+		return -ENODATA;
+
+	chan_cfg = &config->chan_config[ch->channel_id];
+	output = chan_cfg->outputs[ch->output_idx].output;
+	if (output.capabilities != V4L2_OUT_CAP_STD)
+		return -ENODATA;
+
+	*std = ch->video.stdid;
+	return 0;
+}
+
+static int vpif_enum_output(struct file *file, void *fh,
+				struct v4l2_output *output)
+{
+
+	struct vpif_display_config *config = vpif_dev->platform_data;
+	struct video_device *vdev = video_devdata(file);
+	struct channel_obj *ch = video_get_drvdata(vdev);
+	struct vpif_display_chan_config *chan_cfg;
+
+	chan_cfg = &config->chan_config[ch->channel_id];
+	if (output->index >= chan_cfg->output_count) {
+		vpif_dbg(1, debug, "Invalid output index\n");
+		return -EINVAL;
+	}
+
+	*output = chan_cfg->outputs[output->index].output;
+	return 0;
+}
+
+/**
+ * vpif_output_to_subdev() - Maps output to sub device
+ * @vpif_cfg - global config ptr
+ * @chan_cfg - channel config ptr
+ * @index - Given output index from application
+ *
+ * lookup the sub device information for a given output index.
+ * we report all the output to application. output table also
+ * has sub device name for the each output
+ */
+static int
+vpif_output_to_subdev(struct vpif_display_config *vpif_cfg,
+		      struct vpif_display_chan_config *chan_cfg, int index)
+{
+	struct vpif_subdev_info *subdev_info;
+	const char *subdev_name;
+	int i;
+
+	vpif_dbg(2, debug, "vpif_output_to_subdev\n");
+
+	if (chan_cfg->outputs == NULL)
+		return -1;
+
+	subdev_name = chan_cfg->outputs[index].subdev_name;
+	if (subdev_name == NULL)
+		return -1;
+
+	/* loop through the sub device list to get the sub device info */
+	for (i = 0; i < vpif_cfg->subdev_count; i++) {
+		subdev_info = &vpif_cfg->subdevinfo[i];
+		if (!strcmp(subdev_info->name, subdev_name))
+			return i;
+	}
+	return -1;
+}
+
+/**
+ * vpif_set_output() - Select an output
+ * @vpif_cfg - global config ptr
+ * @ch - channel
+ * @index - Given output index from application
+ *
+ * Select the given output.
+ */
+static int vpif_set_output(struct vpif_display_config *vpif_cfg,
+		      struct channel_obj *ch, int index)
+{
+	struct vpif_display_chan_config *chan_cfg =
+		&vpif_cfg->chan_config[ch->channel_id];
+	struct v4l2_subdev *sd = NULL;
+	u32 input = 0, output = 0;
+	int sd_index;
+	int ret;
+
+	sd_index = vpif_output_to_subdev(vpif_cfg, chan_cfg, index);
+	if (sd_index >= 0)
+		sd = vpif_obj.sd[sd_index];
+
+	if (sd) {
+		input = chan_cfg->outputs[index].input_route;
+		output = chan_cfg->outputs[index].output_route;
+		ret = v4l2_subdev_call(sd, video, s_routing, input, output, 0);
+		if (ret < 0 && ret != -ENOIOCTLCMD) {
+			vpif_err("Failed to set output\n");
+			return ret;
+		}
+
+	}
+	ch->output_idx = index;
+	ch->sd = sd;
+	if (chan_cfg->outputs != NULL)
+		/* update tvnorms from the sub device output info */
+		ch->video_dev.tvnorms = chan_cfg->outputs[index].output.std;
+	return 0;
+}
+
+static int vpif_s_output(struct file *file, void *priv, unsigned int i)
+{
+	struct vpif_display_config *config = vpif_dev->platform_data;
+	struct video_device *vdev = video_devdata(file);
+	struct channel_obj *ch = video_get_drvdata(vdev);
+	struct vpif_display_chan_config *chan_cfg;
+	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
+
+	if (vb2_is_busy(&common->buffer_queue))
+		return -EBUSY;
+
+	chan_cfg = &config->chan_config[ch->channel_id];
+
+	if (i >= chan_cfg->output_count)
+		return -EINVAL;
+
+	return vpif_set_output(config, ch, i);
+}
+
+static int vpif_g_output(struct file *file, void *priv, unsigned int *i)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct channel_obj *ch = video_get_drvdata(vdev);
+
+	*i = ch->output_idx;
+
+	return 0;
+}
+
+/**
+ * vpif_enum_dv_timings() - ENUM_DV_TIMINGS handler
+ * @file: file ptr
+ * @priv: file handle
+ * @timings: input timings
+ */
+static int
+vpif_enum_dv_timings(struct file *file, void *priv,
+		     struct v4l2_enum_dv_timings *timings)
+{
+	struct vpif_display_config *config = vpif_dev->platform_data;
+	struct video_device *vdev = video_devdata(file);
+	struct channel_obj *ch = video_get_drvdata(vdev);
+	struct vpif_display_chan_config *chan_cfg;
+	struct v4l2_output output;
+	int ret;
+
+	if (config->chan_config[ch->channel_id].outputs == NULL)
+		return -ENODATA;
+
+	chan_cfg = &config->chan_config[ch->channel_id];
+	output = chan_cfg->outputs[ch->output_idx].output;
+	if (output.capabilities != V4L2_OUT_CAP_DV_TIMINGS)
+		return -ENODATA;
+
+	timings->pad = 0;
+
+	ret = v4l2_subdev_call(ch->sd, pad, enum_dv_timings, timings);
+	if (ret == -ENOIOCTLCMD || ret == -ENODEV)
+		return -EINVAL;
+	return ret;
+}
+
+/**
+ * vpif_s_dv_timings() - S_DV_TIMINGS handler
+ * @file: file ptr
+ * @priv: file handle
+ * @timings: digital video timings
+ */
+static int vpif_s_dv_timings(struct file *file, void *priv,
+		struct v4l2_dv_timings *timings)
+{
+	struct vpif_display_config *config = vpif_dev->platform_data;
+	struct video_device *vdev = video_devdata(file);
+	struct channel_obj *ch = video_get_drvdata(vdev);
+	struct vpif_params *vpifparams = &ch->vpifparams;
+	struct common_obj *common = &ch->common[VPIF_VIDEO_INDEX];
+	struct vpif_channel_config_params *std_info = &vpifparams->std_info;
+	struct video_obj *vid_ch = &ch->video;
+	struct v4l2_bt_timings *bt = &vid_ch->dv_timings.bt;
+	struct vpif_display_chan_config *chan_cfg;
+	struct v4l2_output output;
+	int ret;
+
+	if (config->chan_config[ch->channel_id].outputs == NULL)
+		return -ENODATA;
+
+	chan_cfg = &config->chan_config[ch->channel_id];
+	output = chan_cfg->outputs[ch->output_idx].output;
+	if (output.capabilities != V4L2_OUT_CAP_DV_TIMINGS)
+		return -ENODATA;
+
+	if (vb2_is_busy(&common->buffer_queue))
+		return -EBUSY;
+
+	if (timings->type != V4L2_DV_BT_656_1120) {
+		vpif_dbg(2, debug, "Timing type not defined\n");
+		return -EINVAL;
+	}
+
+	/* Configure subdevice timings, if any */
+	ret = v4l2_subdev_call(ch->sd, video, s_dv_timings, timings);
+	if (ret == -ENOIOCTLCMD || ret == -ENODEV)
+		ret = 0;
+	if (ret < 0) {
+		vpif_dbg(2, debug, "Error setting custom DV timings\n");
+		return ret;
+	}
+
+	if (!(timings->bt.width && timings->bt.height &&
+				(timings->bt.hbackporch ||
+				 timings->bt.hfrontporch ||
+				 timings->bt.hsync) &&
+				timings->bt.vfrontporch &&
+				(timings->bt.vbackporch ||
+				 timings->bt.vsync))) {
+		vpif_dbg(2, debug, "Timings for width, height, "
+				"horizontal back porch, horizontal sync, "
+				"horizontal front porch, vertical back porch, "
+				"vertical sync and vertical back porch "
+				"must be defined\n");
+		return -EINVAL;
+	}
+
+	vid_ch->dv_timings = *timings;
+
+	/* Configure video port timings */
+
+	std_info->eav2sav = V4L2_DV_BT_BLANKING_WIDTH(bt) - 8;
+	std_info->sav2eav = bt->width;
+
+	std_info->l1 = 1;
+	std_info->l3 = bt->vsync + bt->vbackporch + 1;
+
+	std_info->vsize = V4L2_DV_BT_FRAME_HEIGHT(bt);
+	if (bt->interlaced) {
+		if (bt->il_vbackporch || bt->il_vfrontporch || bt->il_vsync) {
+			std_info->l5 = std_info->vsize/2 -
+				(bt->vfrontporch - 1);
+			std_info->l7 = std_info->vsize/2 + 1;
+			std_info->l9 = std_info->l7 + bt->il_vsync +
+				bt->il_vbackporch + 1;
+			std_info->l11 = std_info->vsize -
+				(bt->il_vfrontporch - 1);
+		} else {
+			vpif_dbg(2, debug, "Required timing values for "
+					"interlaced BT format missing\n");
+			return -EINVAL;
+		}
+	} else {
+		std_info->l5 = std_info->vsize - (bt->vfrontporch - 1);
+	}
+	strncpy(std_info->name, "Custom timings BT656/1120",
+			VPIF_MAX_NAME);
+	std_info->width = bt->width;
+	std_info->height = bt->height;
+	std_info->frm_fmt = bt->interlaced ? 0 : 1;
+	std_info->ycmux_mode = 0;
+	std_info->capture_format = 0;
+	std_info->vbi_supported = 0;
+	std_info->hd_sd = 1;
+	std_info->stdid = 0;
+	vid_ch->stdid = 0;
+
+	return 0;
+}
+
+/**
+ * vpif_g_dv_timings() - G_DV_TIMINGS handler
+ * @file: file ptr
+ * @priv: file handle
+ * @timings: digital video timings
+ */
+static int vpif_g_dv_timings(struct file *file, void *priv,
+		struct v4l2_dv_timings *timings)
+{
+	struct vpif_display_config *config = vpif_dev->platform_data;
+	struct video_device *vdev = video_devdata(file);
+	struct channel_obj *ch = video_get_drvdata(vdev);
+	struct vpif_display_chan_config *chan_cfg;
+	struct video_obj *vid_ch = &ch->video;
+	struct v4l2_output output;
+
+	if (config->chan_config[ch->channel_id].outputs == NULL)
+		goto error;
+
+	chan_cfg = &config->chan_config[ch->channel_id];
+	output = chan_cfg->outputs[ch->output_idx].output;
+
+	if (output.capabilities != V4L2_OUT_CAP_DV_TIMINGS)
+		goto error;
+
+	*timings = vid_ch->dv_timings;
+
+	return 0;
+error:
+	return -ENODATA;
+}
+
+/*
+ * vpif_log_status() - Status information
+ * @file: file ptr
+ * @priv: file handle
+ *
+ * Returns zero.
+ */
+static int vpif_log_status(struct file *filep, void *priv)
+{
+	/* status for sub devices */
+	v4l2_device_call_all(&vpif_obj.v4l2_dev, 0, core, log_status);
+
+	return 0;
+}
+
+/* vpif display ioctl operations */
+static const struct v4l2_ioctl_ops vpif_ioctl_ops = {
+	.vidioc_querycap		= vpif_querycap,
+	.vidioc_enum_fmt_vid_out	= vpif_enum_fmt_vid_out,
+	.vidioc_g_fmt_vid_out		= vpif_g_fmt_vid_out,
+	.vidioc_s_fmt_vid_out		= vpif_s_fmt_vid_out,
+	.vidioc_try_fmt_vid_out		= vpif_try_fmt_vid_out,
+
+	.vidioc_reqbufs			= vb2_ioctl_reqbufs,
+	.vidioc_create_bufs		= vb2_ioctl_create_bufs,
+	.vidioc_querybuf		= vb2_ioctl_querybuf,
+	.vidioc_qbuf			= vb2_ioctl_qbuf,
+	.vidioc_dqbuf			= vb2_ioctl_dqbuf,
+	.vidioc_expbuf			= vb2_ioctl_expbuf,
+	.vidioc_streamon		= vb2_ioctl_streamon,
+	.vidioc_streamoff		= vb2_ioctl_streamoff,
+
+	.vidioc_s_std			= vpif_s_std,
+	.vidioc_g_std			= vpif_g_std,
+
+	.vidioc_enum_output		= vpif_enum_output,
+	.vidioc_s_output		= vpif_s_output,
+	.vidioc_g_output		= vpif_g_output,
+
+	.vidioc_enum_dv_timings		= vpif_enum_dv_timings,
+	.vidioc_s_dv_timings		= vpif_s_dv_timings,
+	.vidioc_g_dv_timings		= vpif_g_dv_timings,
+
+	.vidioc_log_status		= vpif_log_status,
+};
+
+static const struct v4l2_file_operations vpif_fops = {
+	.owner		= THIS_MODULE,
+	.open		= v4l2_fh_open,
+	.release	= vb2_fop_release,
+	.unlocked_ioctl	= video_ioctl2,
+	.mmap		= vb2_fop_mmap,
+	.poll		= vb2_fop_poll
+};
+
+/*Configure the channels, buffer sizei, request irq */
+static int initialize_vpif(void)
+{
+	int free_channel_objects_index;
+	int err, i, j;
+
+	/* Allocate memory for six channel objects */
+	for (i = 0; i < VPIF_DISPLAY_MAX_DEVICES; i++) {
+		vpif_obj.dev[i] =
+		    kzalloc(sizeof(struct channel_obj), GFP_KERNEL);
+		/* If memory allocation fails, return error */
+		if (!vpif_obj.dev[i]) {
+			free_channel_objects_index = i;
+			err = -ENOMEM;
+			goto vpif_init_free_channel_objects;
+		}
+	}
+
+	return 0;
+
+vpif_init_free_channel_objects:
+	for (j = 0; j < free_channel_objects_index; j++)
+		kfree(vpif_obj.dev[j]);
+	return err;
+}
+
+static int vpif_async_bound(struct v4l2_async_notifier *notifier,
+			    struct v4l2_subdev *subdev,
+			    struct v4l2_async_subdev *asd)
+{
+	int i;
+
+	for (i = 0; i < vpif_obj.config->subdev_count; i++)
+		if (!strcmp(vpif_obj.config->subdevinfo[i].name,
+			    subdev->name)) {
+			vpif_obj.sd[i] = subdev;
+			vpif_obj.sd[i]->grp_id = 1 << i;
+			return 0;
+		}
+
+	return -EINVAL;
+}
+
+static int vpif_probe_complete(void)
+{
+	struct common_obj *common;
+	struct video_device *vdev;
+	struct channel_obj *ch;
+	struct vb2_queue *q;
+	int j, err, k;
+
+	for (j = 0; j < VPIF_DISPLAY_MAX_DEVICES; j++) {
+		ch = vpif_obj.dev[j];
+		/* Initialize field of the channel objects */
+		for (k = 0; k < VPIF_NUMOBJECTS; k++) {
+			common = &ch->common[k];
+			spin_lock_init(&common->irqlock);
+			mutex_init(&common->lock);
+			common->set_addr = NULL;
+			common->ytop_off = 0;
+			common->ybtm_off = 0;
+			common->ctop_off = 0;
+			common->cbtm_off = 0;
+			common->cur_frm = NULL;
+			common->next_frm = NULL;
+			memset(&common->fmt, 0, sizeof(common->fmt));
+		}
+		ch->initialized = 0;
+		if (vpif_obj.config->subdev_count)
+			ch->sd = vpif_obj.sd[0];
+		ch->channel_id = j;
+
+		memset(&ch->vpifparams, 0, sizeof(ch->vpifparams));
+
+		ch->common[VPIF_VIDEO_INDEX].fmt.type =
+						V4L2_BUF_TYPE_VIDEO_OUTPUT;
+
+		/* select output 0 */
+		err = vpif_set_output(vpif_obj.config, ch, 0);
+		if (err)
+			goto probe_out;
+
+		/* set initial format */
+		ch->video.stdid = V4L2_STD_525_60;
+		memset(&ch->video.dv_timings, 0, sizeof(ch->video.dv_timings));
+		vpif_update_resolution(ch);
+
+		/* Initialize vb2 queue */
+		q = &common->buffer_queue;
+		q->type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
+		q->io_modes = VB2_MMAP | VB2_USERPTR | VB2_DMABUF;
+		q->drv_priv = ch;
+		q->ops = &video_qops;
+		q->mem_ops = &vb2_dma_contig_memops;
+		q->buf_struct_size = sizeof(struct vpif_disp_buffer);
+		q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
+		q->min_buffers_needed = 1;
+		q->lock = &common->lock;
+		err = vb2_queue_init(q);
+		if (err) {
+			vpif_err("vpif_display: vb2_queue_init() failed\n");
+			goto probe_out;
+		}
+
+		common->alloc_ctx = vb2_dma_contig_init_ctx(vpif_dev);
+		if (IS_ERR(common->alloc_ctx)) {
+			vpif_err("Failed to get the context\n");
+			err = PTR_ERR(common->alloc_ctx);
+			goto probe_out;
+		}
+
+		INIT_LIST_HEAD(&common->dma_queue);
+
+		/* register video device */
+		vpif_dbg(1, debug, "channel=%p,channel->video_dev=%p\n",
+			 ch, &ch->video_dev);
+
+		/* Initialize the video_device structure */
+		vdev = &ch->video_dev;
+		strlcpy(vdev->name, VPIF_DRIVER_NAME, sizeof(vdev->name));
+		vdev->release = video_device_release_empty;
+		vdev->fops = &vpif_fops;
+		vdev->ioctl_ops = &vpif_ioctl_ops;
+		vdev->v4l2_dev = &vpif_obj.v4l2_dev;
+		vdev->vfl_dir = VFL_DIR_TX;
+		vdev->queue = q;
+		vdev->lock = &common->lock;
+		video_set_drvdata(&ch->video_dev, ch);
+		err = video_register_device(vdev, VFL_TYPE_GRABBER,
+					    (j ? 3 : 2));
+		if (err < 0)
+			goto probe_out;
+	}
+
+	return 0;
+
+probe_out:
+	for (k = 0; k < j; k++) {
+		ch = vpif_obj.dev[k];
+		common = &ch->common[k];
+		vb2_dma_contig_cleanup_ctx(common->alloc_ctx);
+		video_unregister_device(&ch->video_dev);
+	}
+	return err;
+}
+
+static int vpif_async_complete(struct v4l2_async_notifier *notifier)
+{
+	return vpif_probe_complete();
+}
+
+/*
+ * vpif_probe: This function creates device entries by register itself to the
+ * V4L2 driver and initializes fields of each channel objects
+ */
+static __init int vpif_probe(struct platform_device *pdev)
+{
+	struct vpif_subdev_info *subdevdata;
+	struct i2c_adapter *i2c_adap;
+	struct resource *res;
+	int subdev_count;
+	int res_idx = 0;
+	int i, err;
+
+	vpif_dev = &pdev->dev;
+	err = initialize_vpif();
+
+	if (err) {
+		v4l2_err(vpif_dev->driver, "Error initializing vpif\n");
+		return err;
+	}
+
+	err = v4l2_device_register(vpif_dev, &vpif_obj.v4l2_dev);
+	if (err) {
+		v4l2_err(vpif_dev->driver, "Error registering v4l2 device\n");
+		return err;
+	}
+
+	while ((res = platform_get_resource(pdev, IORESOURCE_IRQ, res_idx))) {
+		err = devm_request_irq(&pdev->dev, res->start, vpif_channel_isr,
+					IRQF_SHARED, VPIF_DRIVER_NAME,
+					(void *)(&vpif_obj.dev[res_idx]->
+					channel_id));
+		if (err) {
+			err = -EINVAL;
+			vpif_err("VPIF IRQ request failed\n");
+			goto vpif_unregister;
+		}
+		res_idx++;
+	}
+
+	vpif_obj.config = pdev->dev.platform_data;
+	subdev_count = vpif_obj.config->subdev_count;
+	subdevdata = vpif_obj.config->subdevinfo;
+	vpif_obj.sd = kzalloc(sizeof(struct v4l2_subdev *) * subdev_count,
+								GFP_KERNEL);
+	if (vpif_obj.sd == NULL) {
+		vpif_err("unable to allocate memory for subdevice pointers\n");
+		err = -ENOMEM;
+		goto vpif_unregister;
+	}
+
+	if (!vpif_obj.config->asd_sizes) {
+		i2c_adap = i2c_get_adapter(1);
+		for (i = 0; i < subdev_count; i++) {
+			vpif_obj.sd[i] =
+				v4l2_i2c_new_subdev_board(&vpif_obj.v4l2_dev,
+							  i2c_adap,
+							  &subdevdata[i].
+							  board_info,
+							  NULL);
+			if (!vpif_obj.sd[i]) {
+				vpif_err("Error registering v4l2 subdevice\n");
+				err = -ENODEV;
+				goto probe_subdev_out;
+			}
+
+			if (vpif_obj.sd[i])
+				vpif_obj.sd[i]->grp_id = 1 << i;
+		}
+		vpif_probe_complete();
+	} else {
+		vpif_obj.notifier.subdevs = vpif_obj.config->asd;
+		vpif_obj.notifier.num_subdevs = vpif_obj.config->asd_sizes[0];
+		vpif_obj.notifier.bound = vpif_async_bound;
+		vpif_obj.notifier.complete = vpif_async_complete;
+		err = v4l2_async_notifier_register(&vpif_obj.v4l2_dev,
+						   &vpif_obj.notifier);
+		if (err) {
+			vpif_err("Error registering async notifier\n");
+			err = -EINVAL;
+			goto probe_subdev_out;
+		}
+	}
+
+	return 0;
+
+probe_subdev_out:
+	kfree(vpif_obj.sd);
+vpif_unregister:
+	v4l2_device_unregister(&vpif_obj.v4l2_dev);
+
+	return err;
+}
+
+/*
+ * vpif_remove: It un-register channels from V4L2 driver
+ */
+static int vpif_remove(struct platform_device *device)
+{
+	struct common_obj *common;
+	struct channel_obj *ch;
+	int i;
+
+	v4l2_device_unregister(&vpif_obj.v4l2_dev);
+
+	kfree(vpif_obj.sd);
+	/* un-register device */
+	for (i = 0; i < VPIF_DISPLAY_MAX_DEVICES; i++) {
+		/* Get the pointer to the channel object */
+		ch = vpif_obj.dev[i];
+		common = &ch->common[VPIF_VIDEO_INDEX];
+		vb2_dma_contig_cleanup_ctx(common->alloc_ctx);
+		/* Unregister video device */
+		video_unregister_device(&ch->video_dev);
+		kfree(vpif_obj.dev[i]);
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int vpif_suspend(struct device *dev)
+{
+	struct common_obj *common;
+	struct channel_obj *ch;
+	int i;
+
+	for (i = 0; i < VPIF_DISPLAY_MAX_DEVICES; i++) {
+		/* Get the pointer to the channel object */
+		ch = vpif_obj.dev[i];
+		common = &ch->common[VPIF_VIDEO_INDEX];
+
+		if (!vb2_start_streaming_called(&common->buffer_queue))
+			continue;
+
+		mutex_lock(&common->lock);
+		/* Disable channel */
+		if (ch->channel_id == VPIF_CHANNEL2_VIDEO) {
+			enable_channel2(0);
+			channel2_intr_enable(0);
+		}
+		if (ch->channel_id == VPIF_CHANNEL3_VIDEO ||
+			ycmux_mode == 2) {
+			enable_channel3(0);
+			channel3_intr_enable(0);
+		}
+		mutex_unlock(&common->lock);
+	}
+
+	return 0;
+}
+
+static int vpif_resume(struct device *dev)
+{
+
+	struct common_obj *common;
+	struct channel_obj *ch;
+	int i;
+
+	for (i = 0; i < VPIF_DISPLAY_MAX_DEVICES; i++) {
+		/* Get the pointer to the channel object */
+		ch = vpif_obj.dev[i];
+		common = &ch->common[VPIF_VIDEO_INDEX];
+
+		if (!vb2_start_streaming_called(&common->buffer_queue))
+			continue;
+
+		mutex_lock(&common->lock);
+		/* Enable channel */
+		if (ch->channel_id == VPIF_CHANNEL2_VIDEO) {
+			enable_channel2(1);
+			channel2_intr_enable(1);
+		}
+		if (ch->channel_id == VPIF_CHANNEL3_VIDEO ||
+				ycmux_mode == 2) {
+			enable_channel3(1);
+			channel3_intr_enable(1);
+		}
+		mutex_unlock(&common->lock);
+	}
+
+	return 0;
+}
+
+#endif
+
+static SIMPLE_DEV_PM_OPS(vpif_pm_ops, vpif_suspend, vpif_resume);
+
+static __refdata struct platform_driver vpif_driver = {
+	.driver	= {
+			.name	= VPIF_DRIVER_NAME,
+			.pm	= &vpif_pm_ops,
+	},
+	.probe	= vpif_probe,
+	.remove	= vpif_remove,
+};
+
+module_platform_driver(vpif_driver);
diff --git a/drivers/media/platform/davinci/vpif_display.h b/drivers/media/platform/davinci/vpif_display.h
new file mode 100644
index 000000000..849e0e385
--- /dev/null
+++ b/drivers/media/platform/davinci/vpif_display.h
@@ -0,0 +1,127 @@
+/*
+ * VPIF display header file
+ *
+ * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed .as is. WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef VPIF_DISPLAY_H
+#define VPIF_DISPLAY_H
+
+/* Header files */
+#include <media/videobuf2-dma-contig.h>
+#include <media/v4l2-device.h>
+
+#include "vpif.h"
+
+/* Macros */
+#define VPIF_DISPLAY_VERSION	"0.0.2"
+
+#define VPIF_VALID_FIELD(field) \
+	(((V4L2_FIELD_ANY == field) || (V4L2_FIELD_NONE == field)) || \
+	(((V4L2_FIELD_INTERLACED == field) || (V4L2_FIELD_SEQ_TB == field)) || \
+	(V4L2_FIELD_SEQ_BT == field)))
+
+#define VPIF_DISPLAY_MAX_DEVICES	(2)
+#define VPIF_SLICED_BUF_SIZE		(256)
+#define VPIF_SLICED_MAX_SERVICES	(3)
+#define VPIF_VIDEO_INDEX		(0)
+#define VPIF_VBI_INDEX			(1)
+#define VPIF_HBI_INDEX			(2)
+
+/* Setting it to 1 as HBI/VBI support yet to be added , else 3*/
+#define VPIF_NUMOBJECTS	(1)
+
+/* Macros */
+#define ISALIGNED(a)    (0 == ((a) & 7))
+
+/* enumerated data types */
+/* Enumerated data type to give id to each device per channel */
+enum vpif_channel_id {
+	VPIF_CHANNEL2_VIDEO = 0,	/* Channel2 Video */
+	VPIF_CHANNEL3_VIDEO,		/* Channel3 Video */
+};
+
+/* structures */
+
+struct video_obj {
+	enum v4l2_field buf_field;
+	u32 latest_only;		/* indicate whether to return
+					 * most recent displayed frame only */
+	v4l2_std_id stdid;		/* Currently selected or default
+					 * standard */
+	struct v4l2_dv_timings dv_timings;
+};
+
+struct vpif_disp_buffer {
+	struct vb2_buffer vb;
+	struct list_head list;
+};
+
+struct common_obj {
+	struct vpif_disp_buffer *cur_frm;	/* Pointer pointing to current
+						 * vb2_buffer */
+	struct vpif_disp_buffer *next_frm;	/* Pointer pointing to next
+						 * vb2_buffer */
+	struct v4l2_format fmt;			/* Used to store the format */
+	struct vb2_queue buffer_queue;		/* Buffer queue used in
+						 * video-buf */
+	/* allocator-specific contexts for each plane */
+	struct vb2_alloc_ctx *alloc_ctx;
+
+	struct list_head dma_queue;		/* Queue of filled frames */
+	spinlock_t irqlock;			/* Used in video-buf */
+
+	/* channel specific parameters */
+	struct mutex lock;			/* lock used to access this
+						 * structure */
+	u32 ytop_off;				/* offset of Y top from the
+						 * starting of the buffer */
+	u32 ybtm_off;				/* offset of Y bottom from the
+						 * starting of the buffer */
+	u32 ctop_off;				/* offset of C top from the
+						 * starting of the buffer */
+	u32 cbtm_off;				/* offset of C bottom from the
+						 * starting of the buffer */
+	/* Function pointer to set the addresses */
+	void (*set_addr)(unsigned long, unsigned long,
+				unsigned long, unsigned long);
+	u32 height;
+	u32 width;
+};
+
+struct channel_obj {
+	/* V4l2 specific parameters */
+	struct video_device video_dev;	/* Identifies video device for
+					 * this channel */
+	u32 field_id;			/* Indicates id of the field
+					 * which is being displayed */
+	u8 initialized;			/* flag to indicate whether
+					 * encoder is initialized */
+	u32 output_idx;			/* Current output index */
+	struct v4l2_subdev *sd;		/* Current output subdev(may be NULL) */
+
+	enum vpif_channel_id channel_id;/* Identifies channel */
+	struct vpif_params vpifparams;
+	struct common_obj common[VPIF_NUMOBJECTS];
+	struct video_obj video;
+};
+
+/* vpif device structure */
+struct vpif_device {
+	struct v4l2_device v4l2_dev;
+	struct channel_obj *dev[VPIF_DISPLAY_NUM_CHANNELS];
+	struct v4l2_subdev **sd;
+	struct v4l2_async_notifier notifier;
+	struct vpif_display_config *config;
+};
+
+#endif				/* VPIF_DISPLAY_H */
diff --git a/drivers/media/platform/davinci/vpss.c b/drivers/media/platform/davinci/vpss.c
new file mode 100644
index 000000000..fce86f17d
--- /dev/null
+++ b/drivers/media/platform/davinci/vpss.c
@@ -0,0 +1,532 @@
+/*
+ * Copyright (C) 2009 Texas Instruments.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * common vpss system module platform driver for all video drivers.
+ */
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/pm_runtime.h>
+#include <linux/err.h>
+
+#include <media/davinci/vpss.h>
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("VPSS Driver");
+MODULE_AUTHOR("Texas Instruments");
+
+/* DM644x defines */
+#define DM644X_SBL_PCR_VPSS		(4)
+
+#define DM355_VPSSBL_INTSEL		0x10
+#define DM355_VPSSBL_EVTSEL		0x14
+/* vpss BL register offsets */
+#define DM355_VPSSBL_CCDCMUX		0x1c
+/* vpss CLK register offsets */
+#define DM355_VPSSCLK_CLKCTRL		0x04
+/* masks and shifts */
+#define VPSS_HSSISEL_SHIFT		4
+/*
+ * VDINT0 - vpss_int0, VDINT1 - vpss_int1, H3A - vpss_int4,
+ * IPIPE_INT1_SDR - vpss_int5
+ */
+#define DM355_VPSSBL_INTSEL_DEFAULT	0xff83ff10
+/* VENCINT - vpss_int8 */
+#define DM355_VPSSBL_EVTSEL_DEFAULT	0x4
+
+#define DM365_ISP5_PCCR				0x04
+#define DM365_ISP5_PCCR_BL_CLK_ENABLE		BIT(0)
+#define DM365_ISP5_PCCR_ISIF_CLK_ENABLE		BIT(1)
+#define DM365_ISP5_PCCR_H3A_CLK_ENABLE		BIT(2)
+#define DM365_ISP5_PCCR_RSZ_CLK_ENABLE		BIT(3)
+#define DM365_ISP5_PCCR_IPIPE_CLK_ENABLE	BIT(4)
+#define DM365_ISP5_PCCR_IPIPEIF_CLK_ENABLE	BIT(5)
+#define DM365_ISP5_PCCR_RSV			BIT(6)
+
+#define DM365_ISP5_BCR			0x08
+#define DM365_ISP5_BCR_ISIF_OUT_ENABLE	BIT(1)
+
+#define DM365_ISP5_INTSEL1		0x10
+#define DM365_ISP5_INTSEL2		0x14
+#define DM365_ISP5_INTSEL3		0x18
+#define DM365_ISP5_CCDCMUX 		0x20
+#define DM365_ISP5_PG_FRAME_SIZE 	0x28
+#define DM365_VPBE_CLK_CTRL 		0x00
+
+#define VPSS_CLK_CTRL			0x01c40044
+#define VPSS_CLK_CTRL_VENCCLKEN		BIT(3)
+#define VPSS_CLK_CTRL_DACCLKEN		BIT(4)
+
+/*
+ * vpss interrupts. VDINT0 - vpss_int0, VDINT1 - vpss_int1,
+ * AF - vpss_int3
+ */
+#define DM365_ISP5_INTSEL1_DEFAULT	0x0b1f0100
+/* AEW - vpss_int6, RSZ_INT_DMA - vpss_int5 */
+#define DM365_ISP5_INTSEL2_DEFAULT	0x1f0a0f1f
+/* VENC - vpss_int8 */
+#define DM365_ISP5_INTSEL3_DEFAULT	0x00000015
+
+/* masks and shifts for DM365*/
+#define DM365_CCDC_PG_VD_POL_SHIFT 	0
+#define DM365_CCDC_PG_HD_POL_SHIFT 	1
+
+#define CCD_SRC_SEL_MASK		(BIT_MASK(5) | BIT_MASK(4))
+#define CCD_SRC_SEL_SHIFT		4
+
+/* Different SoC platforms supported by this driver */
+enum vpss_platform_type {
+	DM644X,
+	DM355,
+	DM365,
+};
+
+/*
+ * vpss operations. Depends on platform. Not all functions are available
+ * on all platforms. The api, first check if a function is available before
+ * invoking it. In the probe, the function ptrs are initialized based on
+ * vpss name. vpss name can be "dm355_vpss", "dm644x_vpss" etc.
+ */
+struct vpss_hw_ops {
+	/* enable clock */
+	int (*enable_clock)(enum vpss_clock_sel clock_sel, int en);
+	/* select input to ccdc */
+	void (*select_ccdc_source)(enum vpss_ccdc_source_sel src_sel);
+	/* clear wbl overflow bit */
+	int (*clear_wbl_overflow)(enum vpss_wbl_sel wbl_sel);
+	/* set sync polarity */
+	void (*set_sync_pol)(struct vpss_sync_pol);
+	/* set the PG_FRAME_SIZE register*/
+	void (*set_pg_frame_size)(struct vpss_pg_frame_size);
+	/* check and clear interrupt if occurred */
+	int (*dma_complete_interrupt)(void);
+};
+
+/* vpss configuration */
+struct vpss_oper_config {
+	__iomem void *vpss_regs_base0;
+	__iomem void *vpss_regs_base1;
+	resource_size_t *vpss_regs_base2;
+	enum vpss_platform_type platform;
+	spinlock_t vpss_lock;
+	struct vpss_hw_ops hw_ops;
+};
+
+static struct vpss_oper_config oper_cfg;
+
+/* register access routines */
+static inline u32 bl_regr(u32 offset)
+{
+	return __raw_readl(oper_cfg.vpss_regs_base0 + offset);
+}
+
+static inline void bl_regw(u32 val, u32 offset)
+{
+	__raw_writel(val, oper_cfg.vpss_regs_base0 + offset);
+}
+
+static inline u32 vpss_regr(u32 offset)
+{
+	return __raw_readl(oper_cfg.vpss_regs_base1 + offset);
+}
+
+static inline void vpss_regw(u32 val, u32 offset)
+{
+	__raw_writel(val, oper_cfg.vpss_regs_base1 + offset);
+}
+
+/* For DM365 only */
+static inline u32 isp5_read(u32 offset)
+{
+	return __raw_readl(oper_cfg.vpss_regs_base0 + offset);
+}
+
+/* For DM365 only */
+static inline void isp5_write(u32 val, u32 offset)
+{
+	__raw_writel(val, oper_cfg.vpss_regs_base0 + offset);
+}
+
+static void dm365_select_ccdc_source(enum vpss_ccdc_source_sel src_sel)
+{
+	u32 temp = isp5_read(DM365_ISP5_CCDCMUX) & ~CCD_SRC_SEL_MASK;
+
+	/* if we are using pattern generator, enable it */
+	if (src_sel == VPSS_PGLPBK || src_sel == VPSS_CCDCPG)
+		temp |= 0x08;
+
+	temp |= (src_sel << CCD_SRC_SEL_SHIFT);
+	isp5_write(temp, DM365_ISP5_CCDCMUX);
+}
+
+static void dm355_select_ccdc_source(enum vpss_ccdc_source_sel src_sel)
+{
+	bl_regw(src_sel << VPSS_HSSISEL_SHIFT, DM355_VPSSBL_CCDCMUX);
+}
+
+int vpss_dma_complete_interrupt(void)
+{
+	if (!oper_cfg.hw_ops.dma_complete_interrupt)
+		return 2;
+	return oper_cfg.hw_ops.dma_complete_interrupt();
+}
+EXPORT_SYMBOL(vpss_dma_complete_interrupt);
+
+int vpss_select_ccdc_source(enum vpss_ccdc_source_sel src_sel)
+{
+	if (!oper_cfg.hw_ops.select_ccdc_source)
+		return -EINVAL;
+
+	oper_cfg.hw_ops.select_ccdc_source(src_sel);
+	return 0;
+}
+EXPORT_SYMBOL(vpss_select_ccdc_source);
+
+static int dm644x_clear_wbl_overflow(enum vpss_wbl_sel wbl_sel)
+{
+	u32 mask = 1, val;
+
+	if (wbl_sel < VPSS_PCR_AEW_WBL_0 ||
+	    wbl_sel > VPSS_PCR_CCDC_WBL_O)
+		return -EINVAL;
+
+	/* writing a 0 clear the overflow */
+	mask = ~(mask << wbl_sel);
+	val = bl_regr(DM644X_SBL_PCR_VPSS) & mask;
+	bl_regw(val, DM644X_SBL_PCR_VPSS);
+	return 0;
+}
+
+void vpss_set_sync_pol(struct vpss_sync_pol sync)
+{
+	if (!oper_cfg.hw_ops.set_sync_pol)
+		return;
+
+	oper_cfg.hw_ops.set_sync_pol(sync);
+}
+EXPORT_SYMBOL(vpss_set_sync_pol);
+
+int vpss_clear_wbl_overflow(enum vpss_wbl_sel wbl_sel)
+{
+	if (!oper_cfg.hw_ops.clear_wbl_overflow)
+		return -EINVAL;
+
+	return oper_cfg.hw_ops.clear_wbl_overflow(wbl_sel);
+}
+EXPORT_SYMBOL(vpss_clear_wbl_overflow);
+
+/*
+ *  dm355_enable_clock - Enable VPSS Clock
+ *  @clock_sel: Clock to be enabled/disabled
+ *  @en: enable/disable flag
+ *
+ *  This is called to enable or disable a vpss clock
+ */
+static int dm355_enable_clock(enum vpss_clock_sel clock_sel, int en)
+{
+	unsigned long flags;
+	u32 utemp, mask = 0x1, shift = 0;
+
+	switch (clock_sel) {
+	case VPSS_VPBE_CLOCK:
+		/* nothing since lsb */
+		break;
+	case VPSS_VENC_CLOCK_SEL:
+		shift = 2;
+		break;
+	case VPSS_CFALD_CLOCK:
+		shift = 3;
+		break;
+	case VPSS_H3A_CLOCK:
+		shift = 4;
+		break;
+	case VPSS_IPIPE_CLOCK:
+		shift = 5;
+		break;
+	case VPSS_CCDC_CLOCK:
+		shift = 6;
+		break;
+	default:
+		printk(KERN_ERR "dm355_enable_clock:"
+				" Invalid selector: %d\n", clock_sel);
+		return -EINVAL;
+	}
+
+	spin_lock_irqsave(&oper_cfg.vpss_lock, flags);
+	utemp = vpss_regr(DM355_VPSSCLK_CLKCTRL);
+	if (!en)
+		utemp &= ~(mask << shift);
+	else
+		utemp |= (mask << shift);
+
+	vpss_regw(utemp, DM355_VPSSCLK_CLKCTRL);
+	spin_unlock_irqrestore(&oper_cfg.vpss_lock, flags);
+	return 0;
+}
+
+static int dm365_enable_clock(enum vpss_clock_sel clock_sel, int en)
+{
+	unsigned long flags;
+	u32 utemp, mask = 0x1, shift = 0, offset = DM365_ISP5_PCCR;
+	u32 (*read)(u32 offset) = isp5_read;
+	void(*write)(u32 val, u32 offset) = isp5_write;
+
+	switch (clock_sel) {
+	case VPSS_BL_CLOCK:
+		break;
+	case VPSS_CCDC_CLOCK:
+		shift = 1;
+		break;
+	case VPSS_H3A_CLOCK:
+		shift = 2;
+		break;
+	case VPSS_RSZ_CLOCK:
+		shift = 3;
+		break;
+	case VPSS_IPIPE_CLOCK:
+		shift = 4;
+		break;
+	case VPSS_IPIPEIF_CLOCK:
+		shift = 5;
+		break;
+	case VPSS_PCLK_INTERNAL:
+		shift = 6;
+		break;
+	case VPSS_PSYNC_CLOCK_SEL:
+		shift = 7;
+		break;
+	case VPSS_VPBE_CLOCK:
+		read = vpss_regr;
+		write = vpss_regw;
+		offset = DM365_VPBE_CLK_CTRL;
+		break;
+	case VPSS_VENC_CLOCK_SEL:
+		shift = 2;
+		read = vpss_regr;
+		write = vpss_regw;
+		offset = DM365_VPBE_CLK_CTRL;
+		break;
+	case VPSS_LDC_CLOCK:
+		shift = 3;
+		read = vpss_regr;
+		write = vpss_regw;
+		offset = DM365_VPBE_CLK_CTRL;
+		break;
+	case VPSS_FDIF_CLOCK:
+		shift = 4;
+		read = vpss_regr;
+		write = vpss_regw;
+		offset = DM365_VPBE_CLK_CTRL;
+		break;
+	case VPSS_OSD_CLOCK_SEL:
+		shift = 6;
+		read = vpss_regr;
+		write = vpss_regw;
+		offset = DM365_VPBE_CLK_CTRL;
+		break;
+	case VPSS_LDC_CLOCK_SEL:
+		shift = 7;
+		read = vpss_regr;
+		write = vpss_regw;
+		offset = DM365_VPBE_CLK_CTRL;
+		break;
+	default:
+		printk(KERN_ERR "dm365_enable_clock: Invalid selector: %d\n",
+		       clock_sel);
+		return -1;
+	}
+
+	spin_lock_irqsave(&oper_cfg.vpss_lock, flags);
+	utemp = read(offset);
+	if (!en) {
+		mask = ~mask;
+		utemp &= (mask << shift);
+	} else
+		utemp |= (mask << shift);
+
+	write(utemp, offset);
+	spin_unlock_irqrestore(&oper_cfg.vpss_lock, flags);
+
+	return 0;
+}
+
+int vpss_enable_clock(enum vpss_clock_sel clock_sel, int en)
+{
+	if (!oper_cfg.hw_ops.enable_clock)
+		return -EINVAL;
+
+	return oper_cfg.hw_ops.enable_clock(clock_sel, en);
+}
+EXPORT_SYMBOL(vpss_enable_clock);
+
+void dm365_vpss_set_sync_pol(struct vpss_sync_pol sync)
+{
+	int val = 0;
+	val = isp5_read(DM365_ISP5_CCDCMUX);
+
+	val |= (sync.ccdpg_hdpol << DM365_CCDC_PG_HD_POL_SHIFT);
+	val |= (sync.ccdpg_vdpol << DM365_CCDC_PG_VD_POL_SHIFT);
+
+	isp5_write(val, DM365_ISP5_CCDCMUX);
+}
+EXPORT_SYMBOL(dm365_vpss_set_sync_pol);
+
+void vpss_set_pg_frame_size(struct vpss_pg_frame_size frame_size)
+{
+	if (!oper_cfg.hw_ops.set_pg_frame_size)
+		return;
+
+	oper_cfg.hw_ops.set_pg_frame_size(frame_size);
+}
+EXPORT_SYMBOL(vpss_set_pg_frame_size);
+
+void dm365_vpss_set_pg_frame_size(struct vpss_pg_frame_size frame_size)
+{
+	int current_reg = ((frame_size.hlpfr >> 1) - 1) << 16;
+
+	current_reg |= (frame_size.pplen - 1);
+	isp5_write(current_reg, DM365_ISP5_PG_FRAME_SIZE);
+}
+EXPORT_SYMBOL(dm365_vpss_set_pg_frame_size);
+
+static int vpss_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	char *platform_name;
+
+	if (!pdev->dev.platform_data) {
+		dev_err(&pdev->dev, "no platform data\n");
+		return -ENOENT;
+	}
+
+	platform_name = pdev->dev.platform_data;
+	if (!strcmp(platform_name, "dm355_vpss"))
+		oper_cfg.platform = DM355;
+	else if (!strcmp(platform_name, "dm365_vpss"))
+		oper_cfg.platform = DM365;
+	else if (!strcmp(platform_name, "dm644x_vpss"))
+		oper_cfg.platform = DM644X;
+	else {
+		dev_err(&pdev->dev, "vpss driver not supported on"
+			" this platform\n");
+		return -ENODEV;
+	}
+
+	dev_info(&pdev->dev, "%s vpss probed\n", platform_name);
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	oper_cfg.vpss_regs_base0 = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(oper_cfg.vpss_regs_base0))
+		return PTR_ERR(oper_cfg.vpss_regs_base0);
+
+	if (oper_cfg.platform == DM355 || oper_cfg.platform == DM365) {
+		res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+
+		oper_cfg.vpss_regs_base1 = devm_ioremap_resource(&pdev->dev,
+								 res);
+		if (IS_ERR(oper_cfg.vpss_regs_base1))
+			return PTR_ERR(oper_cfg.vpss_regs_base1);
+	}
+
+	if (oper_cfg.platform == DM355) {
+		oper_cfg.hw_ops.enable_clock = dm355_enable_clock;
+		oper_cfg.hw_ops.select_ccdc_source = dm355_select_ccdc_source;
+		/* Setup vpss interrupts */
+		bl_regw(DM355_VPSSBL_INTSEL_DEFAULT, DM355_VPSSBL_INTSEL);
+		bl_regw(DM355_VPSSBL_EVTSEL_DEFAULT, DM355_VPSSBL_EVTSEL);
+	} else if (oper_cfg.platform == DM365) {
+		oper_cfg.hw_ops.enable_clock = dm365_enable_clock;
+		oper_cfg.hw_ops.select_ccdc_source = dm365_select_ccdc_source;
+		/* Setup vpss interrupts */
+		isp5_write((isp5_read(DM365_ISP5_PCCR) |
+				      DM365_ISP5_PCCR_BL_CLK_ENABLE |
+				      DM365_ISP5_PCCR_ISIF_CLK_ENABLE |
+				      DM365_ISP5_PCCR_H3A_CLK_ENABLE |
+				      DM365_ISP5_PCCR_RSZ_CLK_ENABLE |
+				      DM365_ISP5_PCCR_IPIPE_CLK_ENABLE |
+				      DM365_ISP5_PCCR_IPIPEIF_CLK_ENABLE |
+				      DM365_ISP5_PCCR_RSV), DM365_ISP5_PCCR);
+		isp5_write((isp5_read(DM365_ISP5_BCR) |
+			    DM365_ISP5_BCR_ISIF_OUT_ENABLE), DM365_ISP5_BCR);
+		isp5_write(DM365_ISP5_INTSEL1_DEFAULT, DM365_ISP5_INTSEL1);
+		isp5_write(DM365_ISP5_INTSEL2_DEFAULT, DM365_ISP5_INTSEL2);
+		isp5_write(DM365_ISP5_INTSEL3_DEFAULT, DM365_ISP5_INTSEL3);
+	} else
+		oper_cfg.hw_ops.clear_wbl_overflow = dm644x_clear_wbl_overflow;
+
+	pm_runtime_enable(&pdev->dev);
+
+	pm_runtime_get(&pdev->dev);
+
+	spin_lock_init(&oper_cfg.vpss_lock);
+	dev_info(&pdev->dev, "%s vpss probe success\n", platform_name);
+
+	return 0;
+}
+
+static int vpss_remove(struct platform_device *pdev)
+{
+	pm_runtime_disable(&pdev->dev);
+	return 0;
+}
+
+static int vpss_suspend(struct device *dev)
+{
+	pm_runtime_put(dev);
+	return 0;
+}
+
+static int vpss_resume(struct device *dev)
+{
+	pm_runtime_get(dev);
+	return 0;
+}
+
+static const struct dev_pm_ops vpss_pm_ops = {
+	.suspend = vpss_suspend,
+	.resume = vpss_resume,
+};
+
+static struct platform_driver vpss_driver = {
+	.driver = {
+		.name	= "vpss",
+		.pm = &vpss_pm_ops,
+	},
+	.remove = vpss_remove,
+	.probe = vpss_probe,
+};
+
+static void vpss_exit(void)
+{
+	iounmap(oper_cfg.vpss_regs_base2);
+	release_mem_region(VPSS_CLK_CTRL, 4);
+	platform_driver_unregister(&vpss_driver);
+}
+
+static int __init vpss_init(void)
+{
+	if (!request_mem_region(VPSS_CLK_CTRL, 4, "vpss_clock_control"))
+		return -EBUSY;
+
+	oper_cfg.vpss_regs_base2 = ioremap(VPSS_CLK_CTRL, 4);
+	writel(VPSS_CLK_CTRL_VENCCLKEN |
+		     VPSS_CLK_CTRL_DACCLKEN, oper_cfg.vpss_regs_base2);
+
+	return platform_driver_register(&vpss_driver);
+}
+subsys_initcall(vpss_init);
+module_exit(vpss_exit);