Initial import

6 files changed, 2739 insertions, 0 deletions

diff --git a/drivers/media/radio/si4713/Kconfig b/drivers/media/radio/si4713/Kconfig
new file mode 100644
index 000000000..9c8b887cf
--- /dev/null
+++ b/drivers/media/radio/si4713/Kconfig
@@ -0,0 +1,40 @@
+config USB_SI4713
+	tristate "Silicon Labs Si4713 FM Radio Transmitter support with USB"
+	depends on USB && I2C && RADIO_SI4713
+	select I2C_SI4713
+	---help---
+	  This is a driver for USB devices with the Silicon Labs SI4713
+	  chip. Currently these devices are known to work.
+	  - 10c4:8244: Silicon Labs FM Transmitter USB device.
+
+	  Say Y here if you want to connect this type of radio to your
+	  computer's USB port.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called radio-usb-si4713.
+
+config PLATFORM_SI4713
+	tristate "Silicon Labs Si4713 FM Radio Transmitter support with I2C"
+	depends on I2C && RADIO_SI4713
+	select I2C_SI4713
+	---help---
+	  This is a driver for I2C devices with the Silicon Labs SI4713
+	  chip.
+
+	  Say Y here if you want to connect this type of radio to your
+	  computer's I2C port.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called radio-platform-si4713.
+
+config I2C_SI4713
+	tristate "Silicon Labs Si4713 FM Radio Transmitter support"
+	depends on I2C && RADIO_SI4713
+	---help---
+	  Say Y here if you want support to Si4713 FM Radio Transmitter.
+	  This device can transmit audio through FM. It can transmit
+	  RDS and RBDS signals as well. This module is the v4l2 radio
+	  interface for the i2c driver of this device.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called si4713.
diff --git a/drivers/media/radio/si4713/Makefile b/drivers/media/radio/si4713/Makefile
new file mode 100644
index 000000000..ddaaf925e
--- /dev/null
+++ b/drivers/media/radio/si4713/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for radios with Silicon Labs Si4713 FM Radio Transmitters
+#
+
+obj-$(CONFIG_I2C_SI4713) += si4713.o
+obj-$(CONFIG_USB_SI4713) += radio-usb-si4713.o
+obj-$(CONFIG_PLATFORM_SI4713) += radio-platform-si4713.o
diff --git a/drivers/media/radio/si4713/radio-platform-si4713.c b/drivers/media/radio/si4713/radio-platform-si4713.c
new file mode 100644
index 000000000..6c7597383
--- /dev/null
+++ b/drivers/media/radio/si4713/radio-platform-si4713.c
@@ -0,0 +1,228 @@
+/*
+ * drivers/media/radio/radio-si4713.c
+ *
+ * Platform Driver for Silicon Labs Si4713 FM Radio Transmitter:
+ *
+ * Copyright (c) 2008 Instituto Nokia de Tecnologia - INdT
+ * Contact: Eduardo Valentin <eduardo.valentin@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/videodev2.h>
+#include <linux/slab.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-fh.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-event.h>
+#include "si4713.h"
+
+/* module parameters */
+static int radio_nr = -1;	/* radio device minor (-1 ==> auto assign) */
+module_param(radio_nr, int, 0);
+MODULE_PARM_DESC(radio_nr,
+		 "Minor number for radio device (-1 ==> auto assign)");
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Eduardo Valentin <eduardo.valentin@nokia.com>");
+MODULE_DESCRIPTION("Platform driver for Si4713 FM Radio Transmitter");
+MODULE_VERSION("0.0.1");
+MODULE_ALIAS("platform:radio-si4713");
+
+/* Driver state struct */
+struct radio_si4713_device {
+	struct v4l2_device		v4l2_dev;
+	struct video_device		radio_dev;
+	struct mutex lock;
+};
+
+/* radio_si4713_fops - file operations interface */
+static const struct v4l2_file_operations radio_si4713_fops = {
+	.owner		= THIS_MODULE,
+	.open = v4l2_fh_open,
+	.release = v4l2_fh_release,
+	.poll = v4l2_ctrl_poll,
+	/* Note: locking is done at the subdev level in the i2c driver. */
+	.unlocked_ioctl	= video_ioctl2,
+};
+
+/* Video4Linux Interface */
+
+/* radio_si4713_querycap - query device capabilities */
+static int radio_si4713_querycap(struct file *file, void *priv,
+					struct v4l2_capability *capability)
+{
+	strlcpy(capability->driver, "radio-si4713", sizeof(capability->driver));
+	strlcpy(capability->card, "Silicon Labs Si4713 Modulator",
+		sizeof(capability->card));
+	strlcpy(capability->bus_info, "platform:radio-si4713",
+		sizeof(capability->bus_info));
+	capability->device_caps = V4L2_CAP_MODULATOR | V4L2_CAP_RDS_OUTPUT;
+	capability->capabilities = capability->device_caps | V4L2_CAP_DEVICE_CAPS;
+
+	return 0;
+}
+
+/*
+ * v4l2 ioctl call backs.
+ * we are just a wrapper for v4l2_sub_devs.
+ */
+static inline struct v4l2_device *get_v4l2_dev(struct file *file)
+{
+	return &((struct radio_si4713_device *)video_drvdata(file))->v4l2_dev;
+}
+
+static int radio_si4713_g_modulator(struct file *file, void *p,
+				    struct v4l2_modulator *vm)
+{
+	return v4l2_device_call_until_err(get_v4l2_dev(file), 0, tuner,
+					  g_modulator, vm);
+}
+
+static int radio_si4713_s_modulator(struct file *file, void *p,
+				    const struct v4l2_modulator *vm)
+{
+	return v4l2_device_call_until_err(get_v4l2_dev(file), 0, tuner,
+					  s_modulator, vm);
+}
+
+static int radio_si4713_g_frequency(struct file *file, void *p,
+				    struct v4l2_frequency *vf)
+{
+	return v4l2_device_call_until_err(get_v4l2_dev(file), 0, tuner,
+					  g_frequency, vf);
+}
+
+static int radio_si4713_s_frequency(struct file *file, void *p,
+				    const struct v4l2_frequency *vf)
+{
+	return v4l2_device_call_until_err(get_v4l2_dev(file), 0, tuner,
+					  s_frequency, vf);
+}
+
+static long radio_si4713_default(struct file *file, void *p,
+				 bool valid_prio, unsigned int cmd, void *arg)
+{
+	return v4l2_device_call_until_err(get_v4l2_dev(file), 0, core,
+					  ioctl, cmd, arg);
+}
+
+static struct v4l2_ioctl_ops radio_si4713_ioctl_ops = {
+	.vidioc_querycap	= radio_si4713_querycap,
+	.vidioc_g_modulator	= radio_si4713_g_modulator,
+	.vidioc_s_modulator	= radio_si4713_s_modulator,
+	.vidioc_g_frequency	= radio_si4713_g_frequency,
+	.vidioc_s_frequency	= radio_si4713_s_frequency,
+	.vidioc_log_status      = v4l2_ctrl_log_status,
+	.vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
+	.vidioc_unsubscribe_event = v4l2_event_unsubscribe,
+	.vidioc_default		= radio_si4713_default,
+};
+
+/* radio_si4713_vdev_template - video device interface */
+static struct video_device radio_si4713_vdev_template = {
+	.fops			= &radio_si4713_fops,
+	.name			= "radio-si4713",
+	.release		= video_device_release_empty,
+	.ioctl_ops		= &radio_si4713_ioctl_ops,
+	.vfl_dir		= VFL_DIR_TX,
+};
+
+/* Platform driver interface */
+/* radio_si4713_pdriver_probe - probe for the device */
+static int radio_si4713_pdriver_probe(struct platform_device *pdev)
+{
+	struct radio_si4713_platform_data *pdata = pdev->dev.platform_data;
+	struct radio_si4713_device *rsdev;
+	struct v4l2_subdev *sd;
+	int rval = 0;
+
+	if (!pdata) {
+		dev_err(&pdev->dev, "Cannot proceed without platform data.\n");
+		rval = -EINVAL;
+		goto exit;
+	}
+
+	rsdev = devm_kzalloc(&pdev->dev, sizeof(*rsdev), GFP_KERNEL);
+	if (!rsdev) {
+		dev_err(&pdev->dev, "Failed to alloc video device.\n");
+		rval = -ENOMEM;
+		goto exit;
+	}
+	mutex_init(&rsdev->lock);
+
+	rval = v4l2_device_register(&pdev->dev, &rsdev->v4l2_dev);
+	if (rval) {
+		dev_err(&pdev->dev, "Failed to register v4l2 device.\n");
+		goto exit;
+	}
+
+	sd = i2c_get_clientdata(pdata->subdev);
+	rval = v4l2_device_register_subdev(&rsdev->v4l2_dev, sd);
+	if (rval) {
+		dev_err(&pdev->dev, "Cannot get v4l2 subdevice\n");
+		goto unregister_v4l2_dev;
+	}
+
+	rsdev->radio_dev = radio_si4713_vdev_template;
+	rsdev->radio_dev.v4l2_dev = &rsdev->v4l2_dev;
+	rsdev->radio_dev.ctrl_handler = sd->ctrl_handler;
+	/* Serialize all access to the si4713 */
+	rsdev->radio_dev.lock = &rsdev->lock;
+	video_set_drvdata(&rsdev->radio_dev, rsdev);
+	if (video_register_device(&rsdev->radio_dev, VFL_TYPE_RADIO, radio_nr)) {
+		dev_err(&pdev->dev, "Could not register video device.\n");
+		rval = -EIO;
+		goto unregister_v4l2_dev;
+	}
+	dev_info(&pdev->dev, "New device successfully probed\n");
+
+	goto exit;
+
+unregister_v4l2_dev:
+	v4l2_device_unregister(&rsdev->v4l2_dev);
+exit:
+	return rval;
+}
+
+/* radio_si4713_pdriver_remove - remove the device */
+static int radio_si4713_pdriver_remove(struct platform_device *pdev)
+{
+	struct v4l2_device *v4l2_dev = platform_get_drvdata(pdev);
+	struct radio_si4713_device *rsdev;
+
+	rsdev = container_of(v4l2_dev, struct radio_si4713_device, v4l2_dev);
+	video_unregister_device(&rsdev->radio_dev);
+	v4l2_device_unregister(&rsdev->v4l2_dev);
+
+	return 0;
+}
+
+static struct platform_driver radio_si4713_pdriver = {
+	.driver		= {
+		.name	= "radio-si4713",
+	},
+	.probe		= radio_si4713_pdriver_probe,
+	.remove         = radio_si4713_pdriver_remove,
+};
+
+module_platform_driver(radio_si4713_pdriver);
diff --git a/drivers/media/radio/si4713/radio-usb-si4713.c b/drivers/media/radio/si4713/radio-usb-si4713.c
new file mode 100644
index 000000000..a77319dcb
--- /dev/null
+++ b/drivers/media/radio/si4713/radio-usb-si4713.c
@@ -0,0 +1,539 @@
+/*
+ * Copyright 2013 Cisco Systems, Inc. and/or its affiliates.
+ * All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+/* kernel includes */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/mutex.h>
+#include <linux/i2c.h>
+/* V4l includes */
+#include <linux/videodev2.h>
+#include <media/v4l2-common.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-event.h>
+#include <media/si4713.h>
+
+#include "si4713.h"
+
+/* driver and module definitions */
+MODULE_AUTHOR("Dinesh Ram <dinesh.ram@cern.ch>");
+MODULE_DESCRIPTION("Si4713 FM Transmitter USB driver");
+MODULE_LICENSE("GPL v2");
+
+/* The Device announces itself as Cygnal Integrated Products, Inc. */
+#define USB_SI4713_VENDOR		0x10c4
+#define USB_SI4713_PRODUCT		0x8244
+
+#define BUFFER_LENGTH			64
+#define USB_TIMEOUT			1000
+#define USB_RESP_TIMEOUT		50000
+
+/* USB Device ID List */
+static struct usb_device_id usb_si4713_usb_device_table[] = {
+	{USB_DEVICE_AND_INTERFACE_INFO(USB_SI4713_VENDOR, USB_SI4713_PRODUCT,
+							USB_CLASS_HID, 0, 0) },
+	{ }						/* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, usb_si4713_usb_device_table);
+
+struct si4713_usb_device {
+	struct usb_device	*usbdev;
+	struct usb_interface	*intf;
+	struct video_device	vdev;
+	struct v4l2_device	v4l2_dev;
+	struct v4l2_subdev	*v4l2_subdev;
+	struct mutex		lock;
+	struct i2c_adapter	i2c_adapter;
+
+	u8			*buffer;
+};
+
+static inline struct si4713_usb_device *to_si4713_dev(struct v4l2_device *v4l2_dev)
+{
+	return container_of(v4l2_dev, struct si4713_usb_device, v4l2_dev);
+}
+
+static int vidioc_querycap(struct file *file, void *priv,
+					struct v4l2_capability *v)
+{
+	struct si4713_usb_device *radio = video_drvdata(file);
+
+	strlcpy(v->driver, "radio-usb-si4713", sizeof(v->driver));
+	strlcpy(v->card, "Si4713 FM Transmitter", sizeof(v->card));
+	usb_make_path(radio->usbdev, v->bus_info, sizeof(v->bus_info));
+	v->device_caps = V4L2_CAP_MODULATOR | V4L2_CAP_RDS_OUTPUT;
+	v->capabilities = v->device_caps | V4L2_CAP_DEVICE_CAPS;
+
+	return 0;
+}
+
+static int vidioc_g_modulator(struct file *file, void *priv,
+				struct v4l2_modulator *vm)
+{
+	struct si4713_usb_device *radio = video_drvdata(file);
+
+	return v4l2_subdev_call(radio->v4l2_subdev, tuner, g_modulator, vm);
+}
+
+static int vidioc_s_modulator(struct file *file, void *priv,
+				const struct v4l2_modulator *vm)
+{
+	struct si4713_usb_device *radio = video_drvdata(file);
+
+	return v4l2_subdev_call(radio->v4l2_subdev, tuner, s_modulator, vm);
+}
+
+static int vidioc_s_frequency(struct file *file, void *priv,
+				const struct v4l2_frequency *vf)
+{
+	struct si4713_usb_device *radio = video_drvdata(file);
+
+	return v4l2_subdev_call(radio->v4l2_subdev, tuner, s_frequency, vf);
+}
+
+static int vidioc_g_frequency(struct file *file, void *priv,
+				struct v4l2_frequency *vf)
+{
+	struct si4713_usb_device *radio = video_drvdata(file);
+
+	return v4l2_subdev_call(radio->v4l2_subdev, tuner, g_frequency, vf);
+}
+
+static const struct v4l2_ioctl_ops usb_si4713_ioctl_ops = {
+	.vidioc_querycap	  = vidioc_querycap,
+	.vidioc_g_modulator	  = vidioc_g_modulator,
+	.vidioc_s_modulator	  = vidioc_s_modulator,
+	.vidioc_g_frequency	  = vidioc_g_frequency,
+	.vidioc_s_frequency	  = vidioc_s_frequency,
+	.vidioc_log_status	  = v4l2_ctrl_log_status,
+	.vidioc_subscribe_event   = v4l2_ctrl_subscribe_event,
+	.vidioc_unsubscribe_event = v4l2_event_unsubscribe,
+};
+
+/* File system interface */
+static const struct v4l2_file_operations usb_si4713_fops = {
+	.owner		= THIS_MODULE,
+	.open           = v4l2_fh_open,
+	.release        = v4l2_fh_release,
+	.poll           = v4l2_ctrl_poll,
+	.unlocked_ioctl	= video_ioctl2,
+};
+
+static void usb_si4713_video_device_release(struct v4l2_device *v4l2_dev)
+{
+	struct si4713_usb_device *radio = to_si4713_dev(v4l2_dev);
+	struct i2c_adapter *adapter = &radio->i2c_adapter;
+
+	i2c_del_adapter(adapter);
+	v4l2_device_unregister(&radio->v4l2_dev);
+	kfree(radio->buffer);
+	kfree(radio);
+}
+
+/*
+ * This command sequence emulates the behaviour of the Windows driver.
+ * The structure of these commands was determined by sniffing the
+ * usb traffic of the device during startup.
+ * Most likely, these commands make some queries to the device.
+ * Commands are sent to enquire parameters like the bus mode,
+ * component revision, boot mode, the device serial number etc.
+ *
+ * These commands are necessary to be sent in this order during startup.
+ * The device fails to powerup if these commands are not sent.
+ *
+ * The complete list of startup commands is given in the start_seq table below.
+ */
+static int si4713_send_startup_command(struct si4713_usb_device *radio)
+{
+	unsigned long until_jiffies = jiffies + usecs_to_jiffies(USB_RESP_TIMEOUT) + 1;
+	u8 *buffer = radio->buffer;
+	int retval;
+
+	/* send the command */
+	retval = usb_control_msg(radio->usbdev, usb_sndctrlpipe(radio->usbdev, 0),
+					0x09, 0x21, 0x033f, 0, radio->buffer,
+					BUFFER_LENGTH, USB_TIMEOUT);
+	if (retval < 0)
+		return retval;
+
+	for (;;) {
+		/* receive the response */
+		retval = usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0),
+				0x01, 0xa1, 0x033f, 0, radio->buffer,
+				BUFFER_LENGTH, USB_TIMEOUT);
+		if (retval < 0)
+			return retval;
+		if (!radio->buffer[1]) {
+			/* USB traffic sniffing showed that some commands require
+			 * additional checks. */
+			switch (buffer[1]) {
+			case 0x32:
+				if (radio->buffer[2] == 0)
+					return 0;
+				break;
+			case 0x14:
+			case 0x12:
+				if (radio->buffer[2] & SI4713_CTS)
+					return 0;
+				break;
+			case 0x06:
+				if ((radio->buffer[2] & SI4713_CTS) && radio->buffer[9] == 0x08)
+					return 0;
+				break;
+			default:
+				return 0;
+			}
+		}
+		if (time_is_before_jiffies(until_jiffies))
+			return -EIO;
+		msleep(3);
+	}
+
+	return retval;
+}
+
+struct si4713_start_seq_table {
+	int len;
+	u8 payload[8];
+};
+
+/*
+ * Some of the startup commands that could be recognized are :
+ * (0x03): Get serial number of the board (Response : CB000-00-00)
+ * (0x06, 0x03, 0x03, 0x08, 0x01, 0x0f) : Get Component revision
+ */
+static const struct si4713_start_seq_table start_seq[] = {
+
+	{ 1, { 0x03 } },
+	{ 2, { 0x32, 0x7f } },
+	{ 6, { 0x06, 0x03, 0x03, 0x08, 0x01, 0x0f } },
+	{ 2, { 0x14, 0x02 } },
+	{ 2, { 0x09, 0x90 } },
+	{ 3, { 0x08, 0x90, 0xfa } },
+	{ 2, { 0x36, 0x01 } },
+	{ 2, { 0x05, 0x03 } },
+	{ 7, { 0x06, 0x00, 0x06, 0x0e, 0x01, 0x0f, 0x05 } },
+	{ 1, { 0x12 } },
+	/* Commands that are sent after pressing the 'Initialize'
+		button in the windows application */
+	{ 1, { 0x03 } },
+	{ 1, { 0x01 } },
+	{ 2, { 0x09, 0x90 } },
+	{ 3, { 0x08, 0x90, 0xfa } },
+	{ 1, { 0x34 } },
+	{ 2, { 0x35, 0x01 } },
+	{ 2, { 0x36, 0x01 } },
+	{ 2, { 0x30, 0x09 } },
+	{ 4, { 0x30, 0x06, 0x00, 0xe2 } },
+	{ 3, { 0x31, 0x01, 0x30 } },
+	{ 3, { 0x31, 0x04, 0x09 } },
+	{ 2, { 0x05, 0x02 } },
+	{ 6, { 0x06, 0x03, 0x03, 0x08, 0x01, 0x0f } },
+};
+
+static int si4713_start_seq(struct si4713_usb_device *radio)
+{
+	int retval = 0;
+	int i;
+
+	radio->buffer[0] = 0x3f;
+
+	for (i = 0; i < ARRAY_SIZE(start_seq); i++) {
+		int len = start_seq[i].len;
+		const u8 *payload = start_seq[i].payload;
+
+		memcpy(radio->buffer + 1, payload, len);
+		memset(radio->buffer + len + 1, 0, BUFFER_LENGTH - 1 - len);
+		retval = si4713_send_startup_command(radio);
+	}
+
+	return retval;
+}
+
+static struct i2c_board_info si4713_board_info = {
+	I2C_BOARD_INFO("si4713", SI4713_I2C_ADDR_BUSEN_HIGH),
+};
+
+struct si4713_command_table {
+	int command_id;
+	u8 payload[8];
+};
+
+/*
+ * Structure of a command :
+ *	Byte 1 : 0x3f (always)
+ *	Byte 2 : 0x06 (send a command)
+ *	Byte 3 : Unknown
+ *	Byte 4 : Number of arguments + 1 (for the command byte)
+ *	Byte 5 : Number of response bytes
+ */
+static struct si4713_command_table command_table[] = {
+
+	{ SI4713_CMD_POWER_UP,		{ 0x00, SI4713_PWUP_NARGS + 1, SI4713_PWUP_NRESP} },
+	{ SI4713_CMD_GET_REV,		{ 0x03, 0x01, SI4713_GETREV_NRESP } },
+	{ SI4713_CMD_POWER_DOWN,	{ 0x00, 0x01, SI4713_PWDN_NRESP} },
+	{ SI4713_CMD_SET_PROPERTY,	{ 0x00, SI4713_SET_PROP_NARGS + 1, SI4713_SET_PROP_NRESP } },
+	{ SI4713_CMD_GET_PROPERTY,	{ 0x00, SI4713_GET_PROP_NARGS + 1, SI4713_GET_PROP_NRESP } },
+	{ SI4713_CMD_TX_TUNE_FREQ,	{ 0x03, SI4713_TXFREQ_NARGS + 1, SI4713_TXFREQ_NRESP } },
+	{ SI4713_CMD_TX_TUNE_POWER,	{ 0x03, SI4713_TXPWR_NARGS + 1, SI4713_TXPWR_NRESP } },
+	{ SI4713_CMD_TX_TUNE_MEASURE,	{ 0x03, SI4713_TXMEA_NARGS + 1, SI4713_TXMEA_NRESP } },
+	{ SI4713_CMD_TX_TUNE_STATUS,	{ 0x00, SI4713_TXSTATUS_NARGS + 1, SI4713_TXSTATUS_NRESP } },
+	{ SI4713_CMD_TX_ASQ_STATUS,	{ 0x03, SI4713_ASQSTATUS_NARGS + 1, SI4713_ASQSTATUS_NRESP } },
+	{ SI4713_CMD_GET_INT_STATUS,	{ 0x03, 0x01, SI4713_GET_STATUS_NRESP } },
+	{ SI4713_CMD_TX_RDS_BUFF,	{ 0x03, SI4713_RDSBUFF_NARGS + 1, SI4713_RDSBUFF_NRESP } },
+	{ SI4713_CMD_TX_RDS_PS,		{ 0x00, SI4713_RDSPS_NARGS + 1, SI4713_RDSPS_NRESP } },
+};
+
+static int send_command(struct si4713_usb_device *radio, u8 *payload, char *data, int len)
+{
+	int retval;
+
+	radio->buffer[0] = 0x3f;
+	radio->buffer[1] = 0x06;
+
+	memcpy(radio->buffer + 2, payload, 3);
+	memcpy(radio->buffer + 5, data, len);
+	memset(radio->buffer + 5 + len, 0, BUFFER_LENGTH - 5 - len);
+
+	/* send the command */
+	retval = usb_control_msg(radio->usbdev, usb_sndctrlpipe(radio->usbdev, 0),
+					0x09, 0x21, 0x033f, 0, radio->buffer,
+					BUFFER_LENGTH, USB_TIMEOUT);
+
+	return retval < 0 ? retval : 0;
+}
+
+static int si4713_i2c_read(struct si4713_usb_device *radio, char *data, int len)
+{
+	unsigned long until_jiffies = jiffies + usecs_to_jiffies(USB_RESP_TIMEOUT) + 1;
+	int retval;
+
+	/* receive the response */
+	for (;;) {
+		retval = usb_control_msg(radio->usbdev,
+					usb_rcvctrlpipe(radio->usbdev, 0),
+					0x01, 0xa1, 0x033f, 0, radio->buffer,
+					BUFFER_LENGTH, USB_TIMEOUT);
+		if (retval < 0)
+			return retval;
+
+		/*
+		 * Check that we get a valid reply back (buffer[1] == 0) and
+		 * that CTS is set before returning, otherwise we wait and try
+		 * again. The i2c driver also does the CTS check, but the timeouts
+		 * used there are much too small for this USB driver, so we wait
+		 * for it here.
+		 */
+		if (radio->buffer[1] == 0 && (radio->buffer[2] & SI4713_CTS)) {
+			memcpy(data, radio->buffer + 2, len);
+			return 0;
+		}
+		if (time_is_before_jiffies(until_jiffies)) {
+			/* Zero the status value, ensuring CTS isn't set */
+			data[0] = 0;
+			return 0;
+		}
+		msleep(3);
+	}
+}
+
+static int si4713_i2c_write(struct si4713_usb_device *radio, char *data, int len)
+{
+	int retval = -EINVAL;
+	int i;
+
+	if (len > BUFFER_LENGTH - 5)
+		return -EINVAL;
+
+	for (i = 0; i < ARRAY_SIZE(command_table); i++) {
+		if (data[0] == command_table[i].command_id)
+			retval = send_command(radio, command_table[i].payload,
+						data, len);
+	}
+
+	return retval < 0 ? retval : 0;
+}
+
+static int si4713_transfer(struct i2c_adapter *i2c_adapter,
+				struct i2c_msg *msgs, int num)
+{
+	struct si4713_usb_device *radio = i2c_get_adapdata(i2c_adapter);
+	int retval = -EINVAL;
+	int i;
+
+	if (num <= 0)
+		return 0;
+
+	for (i = 0; i < num; i++) {
+		if (msgs[i].flags & I2C_M_RD)
+			retval = si4713_i2c_read(radio, msgs[i].buf, msgs[i].len);
+		else
+			retval = si4713_i2c_write(radio, msgs[i].buf, msgs[i].len);
+		if (retval)
+			break;
+	}
+
+	return retval ? retval : num;
+}
+
+static u32 si4713_functionality(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static struct i2c_algorithm si4713_algo = {
+	.master_xfer   = si4713_transfer,
+	.functionality = si4713_functionality,
+};
+
+/* This name value shows up in the sysfs filename associated
+		with this I2C adapter */
+static struct i2c_adapter si4713_i2c_adapter_template = {
+	.name   = "si4713-i2c",
+	.owner  = THIS_MODULE,
+	.algo   = &si4713_algo,
+};
+
+static int si4713_register_i2c_adapter(struct si4713_usb_device *radio)
+{
+	radio->i2c_adapter = si4713_i2c_adapter_template;
+	/* set up sysfs linkage to our parent device */
+	radio->i2c_adapter.dev.parent = &radio->usbdev->dev;
+	i2c_set_adapdata(&radio->i2c_adapter, radio);
+
+	return i2c_add_adapter(&radio->i2c_adapter);
+}
+
+/* check if the device is present and register with v4l and usb if it is */
+static int usb_si4713_probe(struct usb_interface *intf,
+				const struct usb_device_id *id)
+{
+	struct si4713_usb_device *radio;
+	struct i2c_adapter *adapter;
+	struct v4l2_subdev *sd;
+	int retval = -ENOMEM;
+
+	dev_info(&intf->dev, "Si4713 development board discovered: (%04X:%04X)\n",
+			id->idVendor, id->idProduct);
+
+	/* Initialize local device structure */
+	radio = kzalloc(sizeof(struct si4713_usb_device), GFP_KERNEL);
+	if (radio)
+		radio->buffer = kmalloc(BUFFER_LENGTH, GFP_KERNEL);
+
+	if (!radio || !radio->buffer) {
+		dev_err(&intf->dev, "kmalloc for si4713_usb_device failed\n");
+		kfree(radio);
+		return -ENOMEM;
+	}
+
+	mutex_init(&radio->lock);
+
+	radio->usbdev = interface_to_usbdev(intf);
+	radio->intf = intf;
+	usb_set_intfdata(intf, &radio->v4l2_dev);
+
+	retval = si4713_start_seq(radio);
+	if (retval < 0)
+		goto err_v4l2;
+
+	retval = v4l2_device_register(&intf->dev, &radio->v4l2_dev);
+	if (retval < 0) {
+		dev_err(&intf->dev, "couldn't register v4l2_device\n");
+		goto err_v4l2;
+	}
+
+	retval = si4713_register_i2c_adapter(radio);
+	if (retval < 0) {
+		dev_err(&intf->dev, "could not register i2c device\n");
+		goto err_i2cdev;
+	}
+
+	adapter = &radio->i2c_adapter;
+	sd = v4l2_i2c_new_subdev_board(&radio->v4l2_dev, adapter,
+					  &si4713_board_info, NULL);
+	radio->v4l2_subdev = sd;
+	if (!sd) {
+		dev_err(&intf->dev, "cannot get v4l2 subdevice\n");
+		retval = -ENODEV;
+		goto del_adapter;
+	}
+
+	radio->vdev.ctrl_handler = sd->ctrl_handler;
+	radio->v4l2_dev.release = usb_si4713_video_device_release;
+	strlcpy(radio->vdev.name, radio->v4l2_dev.name,
+		sizeof(radio->vdev.name));
+	radio->vdev.v4l2_dev = &radio->v4l2_dev;
+	radio->vdev.fops = &usb_si4713_fops;
+	radio->vdev.ioctl_ops = &usb_si4713_ioctl_ops;
+	radio->vdev.lock = &radio->lock;
+	radio->vdev.release = video_device_release_empty;
+	radio->vdev.vfl_dir = VFL_DIR_TX;
+
+	video_set_drvdata(&radio->vdev, radio);
+
+	retval = video_register_device(&radio->vdev, VFL_TYPE_RADIO, -1);
+	if (retval < 0) {
+		dev_err(&intf->dev, "could not register video device\n");
+		goto del_adapter;
+	}
+
+	dev_info(&intf->dev, "V4L2 device registered as %s\n",
+			video_device_node_name(&radio->vdev));
+
+	return 0;
+
+del_adapter:
+	i2c_del_adapter(adapter);
+err_i2cdev:
+	v4l2_device_unregister(&radio->v4l2_dev);
+err_v4l2:
+	kfree(radio->buffer);
+	kfree(radio);
+	return retval;
+}
+
+static void usb_si4713_disconnect(struct usb_interface *intf)
+{
+	struct si4713_usb_device *radio = to_si4713_dev(usb_get_intfdata(intf));
+
+	dev_info(&intf->dev, "Si4713 development board now disconnected\n");
+
+	mutex_lock(&radio->lock);
+	usb_set_intfdata(intf, NULL);
+	video_unregister_device(&radio->vdev);
+	v4l2_device_disconnect(&radio->v4l2_dev);
+	mutex_unlock(&radio->lock);
+	v4l2_device_put(&radio->v4l2_dev);
+}
+
+/* USB subsystem interface */
+static struct usb_driver usb_si4713_driver = {
+	.name			= "radio-usb-si4713",
+	.probe			= usb_si4713_probe,
+	.disconnect		= usb_si4713_disconnect,
+	.id_table		= usb_si4713_usb_device_table,
+};
+
+module_usb_driver(usb_si4713_driver);
diff --git a/drivers/media/radio/si4713/si4713.c b/drivers/media/radio/si4713/si4713.c
new file mode 100644
index 000000000..e9d03ac69
--- /dev/null
+++ b/drivers/media/radio/si4713/si4713.c
@@ -0,0 +1,1671 @@
+/*
+ * drivers/media/radio/si4713-i2c.c
+ *
+ * Silicon Labs Si4713 FM Radio Transmitter I2C commands.
+ *
+ * Copyright (c) 2009 Nokia Corporation
+ * Contact: Eduardo Valentin <eduardo.valentin@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/gpio.h>
+#include <linux/module.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-common.h>
+
+#include "si4713.h"
+
+/* module parameters */
+static int debug;
+module_param(debug, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug level (0 - 2)");
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Eduardo Valentin <eduardo.valentin@nokia.com>");
+MODULE_DESCRIPTION("I2C driver for Si4713 FM Radio Transmitter");
+MODULE_VERSION("0.0.1");
+
+#define DEFAULT_RDS_PI			0x00
+#define DEFAULT_RDS_PTY			0x00
+#define DEFAULT_RDS_DEVIATION		0x00C8
+#define DEFAULT_RDS_PS_REPEAT_COUNT	0x0003
+#define DEFAULT_LIMITER_RTIME		0x1392
+#define DEFAULT_LIMITER_DEV		0x102CA
+#define DEFAULT_PILOT_FREQUENCY		0x4A38
+#define DEFAULT_PILOT_DEVIATION		0x1A5E
+#define DEFAULT_ACOMP_ATIME		0x0000
+#define DEFAULT_ACOMP_RTIME		0xF4240L
+#define DEFAULT_ACOMP_GAIN		0x0F
+#define DEFAULT_ACOMP_THRESHOLD		(-0x28)
+#define DEFAULT_MUTE			0x01
+#define DEFAULT_POWER_LEVEL		88
+#define DEFAULT_FREQUENCY		8800
+#define DEFAULT_PREEMPHASIS		FMPE_EU
+#define DEFAULT_TUNE_RNL		0xFF
+
+#define to_si4713_device(sd)	container_of(sd, struct si4713_device, sd)
+
+/* frequency domain transformation (using times 10 to avoid floats) */
+#define FREQDEV_UNIT	100000
+#define FREQV4L2_MULTI	625
+#define si4713_to_v4l2(f)	((f * FREQDEV_UNIT) / FREQV4L2_MULTI)
+#define v4l2_to_si4713(f)	((f * FREQV4L2_MULTI) / FREQDEV_UNIT)
+#define FREQ_RANGE_LOW			7600
+#define FREQ_RANGE_HIGH			10800
+
+#define MAX_ARGS 7
+
+#define RDS_BLOCK			8
+#define RDS_BLOCK_CLEAR			0x03
+#define RDS_BLOCK_LOAD			0x04
+#define RDS_RADIOTEXT_2A		0x20
+#define RDS_RADIOTEXT_BLK_SIZE		4
+#define RDS_RADIOTEXT_INDEX_MAX		0x0F
+#define RDS_CARRIAGE_RETURN		0x0D
+
+#define rds_ps_nblocks(len)	((len / RDS_BLOCK) + (len % RDS_BLOCK ? 1 : 0))
+
+#define get_status_bit(p, b, m)	(((p) & (m)) >> (b))
+#define set_bits(p, v, b, m)	(((p) & ~(m)) | ((v) << (b)))
+
+#define ATTACK_TIME_UNIT	500
+
+#define POWER_OFF			0x00
+#define POWER_ON			0x01
+
+#define msb(x)                  ((u8)((u16) x >> 8))
+#define lsb(x)                  ((u8)((u16) x &  0x00FF))
+#define compose_u16(msb, lsb)	(((u16)msb << 8) | lsb)
+#define check_command_failed(status)	(!(status & SI4713_CTS) || \
+					(status & SI4713_ERR))
+/* mute definition */
+#define set_mute(p)	((p & 1) | ((p & 1) << 1));
+
+#ifdef DEBUG
+#define DBG_BUFFER(device, message, buffer, size)			\
+	{								\
+		int i;							\
+		char str[(size)*5];					\
+		for (i = 0; i < size; i++)				\
+			sprintf(str + i * 5, " 0x%02x", buffer[i]);	\
+		v4l2_dbg(2, debug, device, "%s:%s\n", message, str);	\
+	}
+#else
+#define DBG_BUFFER(device, message, buffer, size)
+#endif
+
+/*
+ * Values for limiter release time (sorted by second column)
+ *	device	release
+ *	value	time (us)
+ */
+static long limiter_times[] = {
+	2000,	250,
+	1000,	500,
+	510,	1000,
+	255,	2000,
+	170,	3000,
+	127,	4020,
+	102,	5010,
+	85,	6020,
+	73,	7010,
+	64,	7990,
+	57,	8970,
+	51,	10030,
+	25,	20470,
+	17,	30110,
+	13,	39380,
+	10,	51190,
+	8,	63690,
+	7,	73140,
+	6,	85330,
+	5,	102390,
+};
+
+/*
+ * Values for audio compression release time (sorted by second column)
+ *	device	release
+ *	value	time (us)
+ */
+static unsigned long acomp_rtimes[] = {
+	0,	100000,
+	1,	200000,
+	2,	350000,
+	3,	525000,
+	4,	1000000,
+};
+
+/*
+ * Values for preemphasis (sorted by second column)
+ *	device	preemphasis
+ *	value	value (v4l2)
+ */
+static unsigned long preemphasis_values[] = {
+	FMPE_DISABLED,	V4L2_PREEMPHASIS_DISABLED,
+	FMPE_EU,	V4L2_PREEMPHASIS_50_uS,
+	FMPE_USA,	V4L2_PREEMPHASIS_75_uS,
+};
+
+static int usecs_to_dev(unsigned long usecs, unsigned long const array[],
+			int size)
+{
+	int i;
+	int rval = -EINVAL;
+
+	for (i = 0; i < size / 2; i++)
+		if (array[(i * 2) + 1] >= usecs) {
+			rval = array[i * 2];
+			break;
+		}
+
+	return rval;
+}
+
+/* si4713_handler: IRQ handler, just complete work */
+static irqreturn_t si4713_handler(int irq, void *dev)
+{
+	struct si4713_device *sdev = dev;
+
+	v4l2_dbg(2, debug, &sdev->sd,
+			"%s: sending signal to completion work.\n", __func__);
+	complete(&sdev->work);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * si4713_send_command - sends a command to si4713 and waits its response
+ * @sdev: si4713_device structure for the device we are communicating
+ * @command: command id
+ * @args: command arguments we are sending (up to 7)
+ * @argn: actual size of @args
+ * @response: buffer to place the expected response from the device (up to 15)
+ * @respn: actual size of @response
+ * @usecs: amount of time to wait before reading the response (in usecs)
+ */
+static int si4713_send_command(struct si4713_device *sdev, const u8 command,
+				const u8 args[], const int argn,
+				u8 response[], const int respn, const int usecs)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sdev->sd);
+	unsigned long until_jiffies;
+	u8 data1[MAX_ARGS + 1];
+	int err;
+
+	if (!client->adapter)
+		return -ENODEV;
+
+	/* First send the command and its arguments */
+	data1[0] = command;
+	memcpy(data1 + 1, args, argn);
+	DBG_BUFFER(&sdev->sd, "Parameters", data1, argn + 1);
+
+	err = i2c_master_send(client, data1, argn + 1);
+	if (err != argn + 1) {
+		v4l2_err(&sdev->sd, "Error while sending command 0x%02x\n",
+			command);
+		return err < 0 ? err : -EIO;
+	}
+
+	until_jiffies = jiffies + usecs_to_jiffies(usecs) + 1;
+
+	/* Wait response from interrupt */
+	if (client->irq) {
+		if (!wait_for_completion_timeout(&sdev->work,
+				usecs_to_jiffies(usecs) + 1))
+			v4l2_warn(&sdev->sd,
+				"(%s) Device took too much time to answer.\n",
+				__func__);
+	}
+
+	do {
+		err = i2c_master_recv(client, response, respn);
+		if (err != respn) {
+			v4l2_err(&sdev->sd,
+				"Error %d while reading response for command 0x%02x\n",
+				err, command);
+			return err < 0 ? err : -EIO;
+		}
+
+		DBG_BUFFER(&sdev->sd, "Response", response, respn);
+		if (!check_command_failed(response[0]))
+			return 0;
+
+		if (client->irq)
+			return -EBUSY;
+		if (usecs <= 1000)
+			usleep_range(usecs, 1000);
+		else
+			usleep_range(1000, 2000);
+	} while (time_is_after_jiffies(until_jiffies));
+
+	return -EBUSY;
+}
+
+/*
+ * si4713_read_property - reads a si4713 property
+ * @sdev: si4713_device structure for the device we are communicating
+ * @prop: property identification number
+ * @pv: property value to be returned on success
+ */
+static int si4713_read_property(struct si4713_device *sdev, u16 prop, u32 *pv)
+{
+	int err;
+	u8 val[SI4713_GET_PROP_NRESP];
+	/*
+	 *	.First byte = 0
+	 *	.Second byte = property's MSB
+	 *	.Third byte = property's LSB
+	 */
+	const u8 args[SI4713_GET_PROP_NARGS] = {
+		0x00,
+		msb(prop),
+		lsb(prop),
+	};
+
+	err = si4713_send_command(sdev, SI4713_CMD_GET_PROPERTY,
+				  args, ARRAY_SIZE(args), val,
+				  ARRAY_SIZE(val), DEFAULT_TIMEOUT);
+
+	if (err < 0)
+		return err;
+
+	*pv = compose_u16(val[2], val[3]);
+
+	v4l2_dbg(1, debug, &sdev->sd,
+			"%s: property=0x%02x value=0x%02x status=0x%02x\n",
+			__func__, prop, *pv, val[0]);
+
+	return err;
+}
+
+/*
+ * si4713_write_property - modifies a si4713 property
+ * @sdev: si4713_device structure for the device we are communicating
+ * @prop: property identification number
+ * @val: new value for that property
+ */
+static int si4713_write_property(struct si4713_device *sdev, u16 prop, u16 val)
+{
+	int rval;
+	u8 resp[SI4713_SET_PROP_NRESP];
+	/*
+	 *	.First byte = 0
+	 *	.Second byte = property's MSB
+	 *	.Third byte = property's LSB
+	 *	.Fourth byte = value's MSB
+	 *	.Fifth byte = value's LSB
+	 */
+	const u8 args[SI4713_SET_PROP_NARGS] = {
+		0x00,
+		msb(prop),
+		lsb(prop),
+		msb(val),
+		lsb(val),
+	};
+
+	rval = si4713_send_command(sdev, SI4713_CMD_SET_PROPERTY,
+					args, ARRAY_SIZE(args),
+					resp, ARRAY_SIZE(resp),
+					DEFAULT_TIMEOUT);
+
+	if (rval < 0)
+		return rval;
+
+	v4l2_dbg(1, debug, &sdev->sd,
+			"%s: property=0x%02x value=0x%02x status=0x%02x\n",
+			__func__, prop, val, resp[0]);
+
+	/*
+	 * As there is no command response for SET_PROPERTY,
+	 * wait Tcomp time to finish before proceed, in order
+	 * to have property properly set.
+	 */
+	msleep(TIMEOUT_SET_PROPERTY);
+
+	return rval;
+}
+
+/*
+ * si4713_powerup - Powers the device up
+ * @sdev: si4713_device structure for the device we are communicating
+ */
+static int si4713_powerup(struct si4713_device *sdev)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sdev->sd);
+	int err;
+	u8 resp[SI4713_PWUP_NRESP];
+	/*
+	 *	.First byte = Enabled interrupts and boot function
+	 *	.Second byte = Input operation mode
+	 */
+	u8 args[SI4713_PWUP_NARGS] = {
+		SI4713_PWUP_GPO2OEN | SI4713_PWUP_FUNC_TX,
+		SI4713_PWUP_OPMOD_ANALOG,
+	};
+
+	if (sdev->power_state)
+		return 0;
+
+	if (sdev->vdd) {
+		err = regulator_enable(sdev->vdd);
+		if (err) {
+			v4l2_err(&sdev->sd, "Failed to enable vdd: %d\n", err);
+			return err;
+		}
+	}
+
+	if (sdev->vio) {
+		err = regulator_enable(sdev->vio);
+		if (err) {
+			v4l2_err(&sdev->sd, "Failed to enable vio: %d\n", err);
+			return err;
+		}
+	}
+
+	if (sdev->gpio_reset) {
+		udelay(50);
+		gpiod_set_value(sdev->gpio_reset, 1);
+	}
+
+	if (client->irq)
+		args[0] |= SI4713_PWUP_CTSIEN;
+
+	err = si4713_send_command(sdev, SI4713_CMD_POWER_UP,
+					args, ARRAY_SIZE(args),
+					resp, ARRAY_SIZE(resp),
+					TIMEOUT_POWER_UP);
+
+	if (!err) {
+		v4l2_dbg(1, debug, &sdev->sd, "Powerup response: 0x%02x\n",
+				resp[0]);
+		v4l2_dbg(1, debug, &sdev->sd, "Device in power up mode\n");
+		sdev->power_state = POWER_ON;
+
+		if (client->irq)
+			err = si4713_write_property(sdev, SI4713_GPO_IEN,
+						SI4713_STC_INT | SI4713_CTS);
+		return err;
+	}
+	gpiod_set_value(sdev->gpio_reset, 0);
+
+
+	if (sdev->vdd) {
+		err = regulator_disable(sdev->vdd);
+		if (err)
+			v4l2_err(&sdev->sd, "Failed to disable vdd: %d\n", err);
+	}
+
+	if (sdev->vio) {
+		err = regulator_disable(sdev->vio);
+		if (err)
+			v4l2_err(&sdev->sd, "Failed to disable vio: %d\n", err);
+	}
+
+	return err;
+}
+
+/*
+ * si4713_powerdown - Powers the device down
+ * @sdev: si4713_device structure for the device we are communicating
+ */
+static int si4713_powerdown(struct si4713_device *sdev)
+{
+	int err;
+	u8 resp[SI4713_PWDN_NRESP];
+
+	if (!sdev->power_state)
+		return 0;
+
+	err = si4713_send_command(sdev, SI4713_CMD_POWER_DOWN,
+					NULL, 0,
+					resp, ARRAY_SIZE(resp),
+					DEFAULT_TIMEOUT);
+
+	if (!err) {
+		v4l2_dbg(1, debug, &sdev->sd, "Power down response: 0x%02x\n",
+				resp[0]);
+		v4l2_dbg(1, debug, &sdev->sd, "Device in reset mode\n");
+		if (sdev->gpio_reset)
+			gpiod_set_value(sdev->gpio_reset, 0);
+
+		if (sdev->vdd) {
+			err = regulator_disable(sdev->vdd);
+			if (err) {
+				v4l2_err(&sdev->sd,
+					"Failed to disable vdd: %d\n", err);
+			}
+		}
+
+		if (sdev->vio) {
+			err = regulator_disable(sdev->vio);
+			if (err) {
+				v4l2_err(&sdev->sd,
+					"Failed to disable vio: %d\n", err);
+			}
+		}
+		sdev->power_state = POWER_OFF;
+	}
+
+	return err;
+}
+
+/*
+ * si4713_checkrev - Checks if we are treating a device with the correct rev.
+ * @sdev: si4713_device structure for the device we are communicating
+ */
+static int si4713_checkrev(struct si4713_device *sdev)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sdev->sd);
+	int rval;
+	u8 resp[SI4713_GETREV_NRESP];
+
+	rval = si4713_send_command(sdev, SI4713_CMD_GET_REV,
+					NULL, 0,
+					resp, ARRAY_SIZE(resp),
+					DEFAULT_TIMEOUT);
+
+	if (rval < 0)
+		return rval;
+
+	if (resp[1] == SI4713_PRODUCT_NUMBER) {
+		v4l2_info(&sdev->sd, "chip found @ 0x%02x (%s)\n",
+				client->addr << 1, client->adapter->name);
+	} else {
+		v4l2_err(&sdev->sd, "Invalid product number 0x%X\n", resp[1]);
+		rval = -EINVAL;
+	}
+	return rval;
+}
+
+/*
+ * si4713_wait_stc - Waits STC interrupt and clears status bits. Useful
+ *		     for TX_TUNE_POWER, TX_TUNE_FREQ and TX_TUNE_MEAS
+ * @sdev: si4713_device structure for the device we are communicating
+ * @usecs: timeout to wait for STC interrupt signal
+ */
+static int si4713_wait_stc(struct si4713_device *sdev, const int usecs)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&sdev->sd);
+	u8 resp[SI4713_GET_STATUS_NRESP];
+	unsigned long start_jiffies = jiffies;
+	int err;
+
+	if (client->irq &&
+	    !wait_for_completion_timeout(&sdev->work, usecs_to_jiffies(usecs) + 1))
+		v4l2_warn(&sdev->sd,
+			"(%s) Device took too much time to answer.\n", __func__);
+
+	for (;;) {
+		/* Clear status bits */
+		err = si4713_send_command(sdev, SI4713_CMD_GET_INT_STATUS,
+				NULL, 0,
+				resp, ARRAY_SIZE(resp),
+				DEFAULT_TIMEOUT);
+		/* The USB device returns errors when it waits for the
+		 * STC bit to be set. Hence polling */
+		if (err >= 0) {
+			v4l2_dbg(1, debug, &sdev->sd,
+				"%s: status bits: 0x%02x\n", __func__, resp[0]);
+
+			if (resp[0] & SI4713_STC_INT)
+				return 0;
+		}
+		if (jiffies_to_usecs(jiffies - start_jiffies) > usecs)
+			return err < 0 ? err : -EIO;
+		/* We sleep here for 3-4 ms in order to avoid flooding the device
+		 * with USB requests. The si4713 USB driver was developed
+		 * by reverse engineering the Windows USB driver. The windows
+		 * driver also has a ~2.5 ms delay between responses. */
+		usleep_range(3000, 4000);
+	}
+}
+
+/*
+ * si4713_tx_tune_freq - Sets the state of the RF carrier and sets the tuning
+ *			frequency between 76 and 108 MHz in 10 kHz units and
+ *			steps of 50 kHz.
+ * @sdev: si4713_device structure for the device we are communicating
+ * @frequency: desired frequency (76 - 108 MHz, unit 10 KHz, step 50 kHz)
+ */
+static int si4713_tx_tune_freq(struct si4713_device *sdev, u16 frequency)
+{
+	int err;
+	u8 val[SI4713_TXFREQ_NRESP];
+	/*
+	 *	.First byte = 0
+	 *	.Second byte = frequency's MSB
+	 *	.Third byte = frequency's LSB
+	 */
+	const u8 args[SI4713_TXFREQ_NARGS] = {
+		0x00,
+		msb(frequency),
+		lsb(frequency),
+	};
+
+	err = si4713_send_command(sdev, SI4713_CMD_TX_TUNE_FREQ,
+				  args, ARRAY_SIZE(args), val,
+				  ARRAY_SIZE(val), DEFAULT_TIMEOUT);
+
+	if (err < 0)
+		return err;
+
+	v4l2_dbg(1, debug, &sdev->sd,
+			"%s: frequency=0x%02x status=0x%02x\n", __func__,
+			frequency, val[0]);
+
+	err = si4713_wait_stc(sdev, TIMEOUT_TX_TUNE);
+	if (err < 0)
+		return err;
+
+	return compose_u16(args[1], args[2]);
+}
+
+/*
+ * si4713_tx_tune_power - Sets the RF voltage level between 88 and 120 dBuV in
+ *			1 dB units. A value of 0x00 indicates off. The command
+ *			also sets the antenna tuning capacitance. A value of 0
+ *			indicates autotuning, and a value of 1 - 191 indicates
+ *			a manual override, which results in a tuning
+ *			capacitance of 0.25 pF x @antcap.
+ * @sdev: si4713_device structure for the device we are communicating
+ * @power: tuning power (88 - 120 dBuV, unit/step 1 dB)
+ * @antcap: value of antenna tuning capacitor (0 - 191)
+ */
+static int si4713_tx_tune_power(struct si4713_device *sdev, u8 power,
+				u8 antcap)
+{
+	int err;
+	u8 val[SI4713_TXPWR_NRESP];
+	/*
+	 *	.First byte = 0
+	 *	.Second byte = 0
+	 *	.Third byte = power
+	 *	.Fourth byte = antcap
+	 */
+	u8 args[SI4713_TXPWR_NARGS] = {
+		0x00,
+		0x00,
+		power,
+		antcap,
+	};
+
+	/* Map power values 1-87 to MIN_POWER (88) */
+	if (power > 0 && power < SI4713_MIN_POWER)
+		args[2] = power = SI4713_MIN_POWER;
+
+	err = si4713_send_command(sdev, SI4713_CMD_TX_TUNE_POWER,
+				  args, ARRAY_SIZE(args), val,
+				  ARRAY_SIZE(val), DEFAULT_TIMEOUT);
+
+	if (err < 0)
+		return err;
+
+	v4l2_dbg(1, debug, &sdev->sd,
+			"%s: power=0x%02x antcap=0x%02x status=0x%02x\n",
+			__func__, power, antcap, val[0]);
+
+	return si4713_wait_stc(sdev, TIMEOUT_TX_TUNE_POWER);
+}
+
+/*
+ * si4713_tx_tune_measure - Enters receive mode and measures the received noise
+ *			level in units of dBuV on the selected frequency.
+ *			The Frequency must be between 76 and 108 MHz in 10 kHz
+ *			units and steps of 50 kHz. The command also sets the
+ *			antenna	tuning capacitance. A value of 0 means
+ *			autotuning, and a value of 1 to 191 indicates manual
+ *			override.
+ * @sdev: si4713_device structure for the device we are communicating
+ * @frequency: desired frequency (76 - 108 MHz, unit 10 KHz, step 50 kHz)
+ * @antcap: value of antenna tuning capacitor (0 - 191)
+ */
+static int si4713_tx_tune_measure(struct si4713_device *sdev, u16 frequency,
+					u8 antcap)
+{
+	int err;
+	u8 val[SI4713_TXMEA_NRESP];
+	/*
+	 *	.First byte = 0
+	 *	.Second byte = frequency's MSB
+	 *	.Third byte = frequency's LSB
+	 *	.Fourth byte = antcap
+	 */
+	const u8 args[SI4713_TXMEA_NARGS] = {
+		0x00,
+		msb(frequency),
+		lsb(frequency),
+		antcap,
+	};
+
+	sdev->tune_rnl = DEFAULT_TUNE_RNL;
+
+	if (antcap > SI4713_MAX_ANTCAP)
+		return -EDOM;
+
+	err = si4713_send_command(sdev, SI4713_CMD_TX_TUNE_MEASURE,
+				  args, ARRAY_SIZE(args), val,
+				  ARRAY_SIZE(val), DEFAULT_TIMEOUT);
+
+	if (err < 0)
+		return err;
+
+	v4l2_dbg(1, debug, &sdev->sd,
+			"%s: frequency=0x%02x antcap=0x%02x status=0x%02x\n",
+			__func__, frequency, antcap, val[0]);
+
+	return si4713_wait_stc(sdev, TIMEOUT_TX_TUNE);
+}
+
+/*
+ * si4713_tx_tune_status- Returns the status of the tx_tune_freq, tx_tune_mea or
+ *			tx_tune_power commands. This command return the current
+ *			frequency, output voltage in dBuV, the antenna tunning
+ *			capacitance value and the received noise level. The
+ *			command also clears the stcint interrupt bit when the
+ *			first bit of its arguments is high.
+ * @sdev: si4713_device structure for the device we are communicating
+ * @intack: 0x01 to clear the seek/tune complete interrupt status indicator.
+ * @frequency: returned frequency
+ * @power: returned power
+ * @antcap: returned antenna capacitance
+ * @noise: returned noise level
+ */
+static int si4713_tx_tune_status(struct si4713_device *sdev, u8 intack,
+					u16 *frequency,	u8 *power,
+					u8 *antcap, u8 *noise)
+{
+	int err;
+	u8 val[SI4713_TXSTATUS_NRESP];
+	/*
+	 *	.First byte = intack bit
+	 */
+	const u8 args[SI4713_TXSTATUS_NARGS] = {
+		intack & SI4713_INTACK_MASK,
+	};
+
+	err = si4713_send_command(sdev, SI4713_CMD_TX_TUNE_STATUS,
+				  args, ARRAY_SIZE(args), val,
+				  ARRAY_SIZE(val), DEFAULT_TIMEOUT);
+
+	if (!err) {
+		v4l2_dbg(1, debug, &sdev->sd,
+			"%s: status=0x%02x\n", __func__, val[0]);
+		*frequency = compose_u16(val[2], val[3]);
+		sdev->frequency = *frequency;
+		*power = val[5];
+		*antcap = val[6];
+		*noise = val[7];
+		v4l2_dbg(1, debug, &sdev->sd, "%s: response: %d x 10 kHz "
+				"(power %d, antcap %d, rnl %d)\n", __func__,
+				*frequency, *power, *antcap, *noise);
+	}
+
+	return err;
+}
+
+/*
+ * si4713_tx_rds_buff - Loads the RDS group buffer FIFO or circular buffer.
+ * @sdev: si4713_device structure for the device we are communicating
+ * @mode: the buffer operation mode.
+ * @rdsb: RDS Block B
+ * @rdsc: RDS Block C
+ * @rdsd: RDS Block D
+ * @cbleft: returns the number of available circular buffer blocks minus the
+ *          number of used circular buffer blocks.
+ */
+static int si4713_tx_rds_buff(struct si4713_device *sdev, u8 mode, u16 rdsb,
+				u16 rdsc, u16 rdsd, s8 *cbleft)
+{
+	int err;
+	u8 val[SI4713_RDSBUFF_NRESP];
+
+	const u8 args[SI4713_RDSBUFF_NARGS] = {
+		mode & SI4713_RDSBUFF_MODE_MASK,
+		msb(rdsb),
+		lsb(rdsb),
+		msb(rdsc),
+		lsb(rdsc),
+		msb(rdsd),
+		lsb(rdsd),
+	};
+
+	err = si4713_send_command(sdev, SI4713_CMD_TX_RDS_BUFF,
+				  args, ARRAY_SIZE(args), val,
+				  ARRAY_SIZE(val), DEFAULT_TIMEOUT);
+
+	if (!err) {
+		v4l2_dbg(1, debug, &sdev->sd,
+			"%s: status=0x%02x\n", __func__, val[0]);
+		*cbleft = (s8)val[2] - val[3];
+		v4l2_dbg(1, debug, &sdev->sd, "%s: response: interrupts"
+				" 0x%02x cb avail: %d cb used %d fifo avail"
+				" %d fifo used %d\n", __func__, val[1],
+				val[2], val[3], val[4], val[5]);
+	}
+
+	return err;
+}
+
+/*
+ * si4713_tx_rds_ps - Loads the program service buffer.
+ * @sdev: si4713_device structure for the device we are communicating
+ * @psid: program service id to be loaded.
+ * @pschar: assumed 4 size char array to be loaded into the program service
+ */
+static int si4713_tx_rds_ps(struct si4713_device *sdev, u8 psid,
+				unsigned char *pschar)
+{
+	int err;
+	u8 val[SI4713_RDSPS_NRESP];
+
+	const u8 args[SI4713_RDSPS_NARGS] = {
+		psid & SI4713_RDSPS_PSID_MASK,
+		pschar[0],
+		pschar[1],
+		pschar[2],
+		pschar[3],
+	};
+
+	err = si4713_send_command(sdev, SI4713_CMD_TX_RDS_PS,
+				  args, ARRAY_SIZE(args), val,
+				  ARRAY_SIZE(val), DEFAULT_TIMEOUT);
+
+	if (err < 0)
+		return err;
+
+	v4l2_dbg(1, debug, &sdev->sd, "%s: status=0x%02x\n", __func__, val[0]);
+
+	return err;
+}
+
+static int si4713_set_power_state(struct si4713_device *sdev, u8 value)
+{
+	if (value)
+		return si4713_powerup(sdev);
+	return si4713_powerdown(sdev);
+}
+
+static int si4713_set_mute(struct si4713_device *sdev, u16 mute)
+{
+	int rval = 0;
+
+	mute = set_mute(mute);
+
+	if (sdev->power_state)
+		rval = si4713_write_property(sdev,
+				SI4713_TX_LINE_INPUT_MUTE, mute);
+
+	return rval;
+}
+
+static int si4713_set_rds_ps_name(struct si4713_device *sdev, char *ps_name)
+{
+	int rval = 0, i;
+	u8 len = 0;
+
+	/* We want to clear the whole thing */
+	if (!strlen(ps_name))
+		memset(ps_name, 0, MAX_RDS_PS_NAME + 1);
+
+	if (sdev->power_state) {
+		/* Write the new ps name and clear the padding */
+		for (i = 0; i < MAX_RDS_PS_NAME; i += (RDS_BLOCK / 2)) {
+			rval = si4713_tx_rds_ps(sdev, (i / (RDS_BLOCK / 2)),
+						ps_name + i);
+			if (rval < 0)
+				return rval;
+		}
+
+		/* Setup the size to be sent */
+		if (strlen(ps_name))
+			len = strlen(ps_name) - 1;
+		else
+			len = 1;
+
+		rval = si4713_write_property(sdev,
+				SI4713_TX_RDS_PS_MESSAGE_COUNT,
+				rds_ps_nblocks(len));
+		if (rval < 0)
+			return rval;
+
+		rval = si4713_write_property(sdev,
+				SI4713_TX_RDS_PS_REPEAT_COUNT,
+				DEFAULT_RDS_PS_REPEAT_COUNT * 2);
+		if (rval < 0)
+			return rval;
+	}
+
+	return rval;
+}
+
+static int si4713_set_rds_radio_text(struct si4713_device *sdev, const char *rt)
+{
+	static const char cr[RDS_RADIOTEXT_BLK_SIZE] = { RDS_CARRIAGE_RETURN, 0 };
+	int rval = 0, i;
+	u16 t_index = 0;
+	u8 b_index = 0, cr_inserted = 0;
+	s8 left;
+
+	if (!sdev->power_state)
+		return rval;
+
+	rval = si4713_tx_rds_buff(sdev, RDS_BLOCK_CLEAR, 0, 0, 0, &left);
+	if (rval < 0)
+		return rval;
+
+	if (!strlen(rt))
+		return rval;
+
+	do {
+		/* RDS spec says that if the last block isn't used,
+		 * then apply a carriage return
+		 */
+		if (t_index < (RDS_RADIOTEXT_INDEX_MAX * RDS_RADIOTEXT_BLK_SIZE)) {
+			for (i = 0; i < RDS_RADIOTEXT_BLK_SIZE; i++) {
+				if (!rt[t_index + i] ||
+				    rt[t_index + i] == RDS_CARRIAGE_RETURN) {
+					rt = cr;
+					cr_inserted = 1;
+					break;
+				}
+			}
+		}
+
+		rval = si4713_tx_rds_buff(sdev, RDS_BLOCK_LOAD,
+				compose_u16(RDS_RADIOTEXT_2A, b_index++),
+				compose_u16(rt[t_index], rt[t_index + 1]),
+				compose_u16(rt[t_index + 2], rt[t_index + 3]),
+				&left);
+		if (rval < 0)
+			return rval;
+
+		t_index += RDS_RADIOTEXT_BLK_SIZE;
+
+		if (cr_inserted)
+			break;
+	} while (left > 0);
+
+	return rval;
+}
+
+/*
+ * si4713_update_tune_status - update properties from tx_tune_status
+ * command. Must be called with sdev->mutex held.
+ * @sdev: si4713_device structure for the device we are communicating
+ */
+static int si4713_update_tune_status(struct si4713_device *sdev)
+{
+	int rval;
+	u16 f = 0;
+	u8 p = 0, a = 0, n = 0;
+
+	rval = si4713_tx_tune_status(sdev, 0x00, &f, &p, &a, &n);
+
+	if (rval < 0)
+		goto exit;
+
+/*	TODO: check that power_level and antenna_capacitor really are not
+	changed by the hardware. If they are, then these controls should become
+	volatiles.
+	sdev->power_level = p;
+	sdev->antenna_capacitor = a;*/
+	sdev->tune_rnl = n;
+
+exit:
+	return rval;
+}
+
+static int si4713_choose_econtrol_action(struct si4713_device *sdev, u32 id,
+		s32 *bit, s32 *mask, u16 *property, int *mul,
+		unsigned long **table, int *size)
+{
+	s32 rval = 0;
+
+	switch (id) {
+	/* FM_TX class controls */
+	case V4L2_CID_RDS_TX_PI:
+		*property = SI4713_TX_RDS_PI;
+		*mul = 1;
+		break;
+	case V4L2_CID_AUDIO_COMPRESSION_THRESHOLD:
+		*property = SI4713_TX_ACOMP_THRESHOLD;
+		*mul = 1;
+		break;
+	case V4L2_CID_AUDIO_COMPRESSION_GAIN:
+		*property = SI4713_TX_ACOMP_GAIN;
+		*mul = 1;
+		break;
+	case V4L2_CID_PILOT_TONE_FREQUENCY:
+		*property = SI4713_TX_PILOT_FREQUENCY;
+		*mul = 1;
+		break;
+	case V4L2_CID_AUDIO_COMPRESSION_ATTACK_TIME:
+		*property = SI4713_TX_ACOMP_ATTACK_TIME;
+		*mul = ATTACK_TIME_UNIT;
+		break;
+	case V4L2_CID_PILOT_TONE_DEVIATION:
+		*property = SI4713_TX_PILOT_DEVIATION;
+		*mul = 10;
+		break;
+	case V4L2_CID_AUDIO_LIMITER_DEVIATION:
+		*property = SI4713_TX_AUDIO_DEVIATION;
+		*mul = 10;
+		break;
+	case V4L2_CID_RDS_TX_DEVIATION:
+		*property = SI4713_TX_RDS_DEVIATION;
+		*mul = 1;
+		break;
+
+	case V4L2_CID_RDS_TX_PTY:
+		*property = SI4713_TX_RDS_PS_MISC;
+		*bit = 5;
+		*mask = 0x1F << 5;
+		break;
+	case V4L2_CID_RDS_TX_DYNAMIC_PTY:
+		*property = SI4713_TX_RDS_PS_MISC;
+		*bit = 15;
+		*mask = 1 << 15;
+		break;
+	case V4L2_CID_RDS_TX_COMPRESSED:
+		*property = SI4713_TX_RDS_PS_MISC;
+		*bit = 14;
+		*mask = 1 << 14;
+		break;
+	case V4L2_CID_RDS_TX_ARTIFICIAL_HEAD:
+		*property = SI4713_TX_RDS_PS_MISC;
+		*bit = 13;
+		*mask = 1 << 13;
+		break;
+	case V4L2_CID_RDS_TX_MONO_STEREO:
+		*property = SI4713_TX_RDS_PS_MISC;
+		*bit = 12;
+		*mask = 1 << 12;
+		break;
+	case V4L2_CID_RDS_TX_TRAFFIC_PROGRAM:
+		*property = SI4713_TX_RDS_PS_MISC;
+		*bit = 10;
+		*mask = 1 << 10;
+		break;
+	case V4L2_CID_RDS_TX_TRAFFIC_ANNOUNCEMENT:
+		*property = SI4713_TX_RDS_PS_MISC;
+		*bit = 4;
+		*mask = 1 << 4;
+		break;
+	case V4L2_CID_RDS_TX_MUSIC_SPEECH:
+		*property = SI4713_TX_RDS_PS_MISC;
+		*bit = 3;
+		*mask = 1 << 3;
+		break;
+	case V4L2_CID_AUDIO_LIMITER_ENABLED:
+		*property = SI4713_TX_ACOMP_ENABLE;
+		*bit = 1;
+		*mask = 1 << 1;
+		break;
+	case V4L2_CID_AUDIO_COMPRESSION_ENABLED:
+		*property = SI4713_TX_ACOMP_ENABLE;
+		*bit = 0;
+		*mask = 1 << 0;
+		break;
+	case V4L2_CID_PILOT_TONE_ENABLED:
+		*property = SI4713_TX_COMPONENT_ENABLE;
+		*bit = 0;
+		*mask = 1 << 0;
+		break;
+
+	case V4L2_CID_AUDIO_LIMITER_RELEASE_TIME:
+		*property = SI4713_TX_LIMITER_RELEASE_TIME;
+		*table = limiter_times;
+		*size = ARRAY_SIZE(limiter_times);
+		break;
+	case V4L2_CID_AUDIO_COMPRESSION_RELEASE_TIME:
+		*property = SI4713_TX_ACOMP_RELEASE_TIME;
+		*table = acomp_rtimes;
+		*size = ARRAY_SIZE(acomp_rtimes);
+		break;
+	case V4L2_CID_TUNE_PREEMPHASIS:
+		*property = SI4713_TX_PREEMPHASIS;
+		*table = preemphasis_values;
+		*size = ARRAY_SIZE(preemphasis_values);
+		break;
+
+	default:
+		rval = -EINVAL;
+		break;
+	}
+
+	return rval;
+}
+
+static int si4713_s_frequency(struct v4l2_subdev *sd, const struct v4l2_frequency *f);
+static int si4713_s_modulator(struct v4l2_subdev *sd, const struct v4l2_modulator *);
+/*
+ * si4713_setup - Sets the device up with current configuration.
+ * @sdev: si4713_device structure for the device we are communicating
+ */
+static int si4713_setup(struct si4713_device *sdev)
+{
+	struct v4l2_frequency f;
+	struct v4l2_modulator vm;
+	int rval;
+
+	/* Device procedure needs to set frequency first */
+	f.tuner = 0;
+	f.frequency = sdev->frequency ? sdev->frequency : DEFAULT_FREQUENCY;
+	f.frequency = si4713_to_v4l2(f.frequency);
+	rval = si4713_s_frequency(&sdev->sd, &f);
+
+	vm.index = 0;
+	if (sdev->stereo)
+		vm.txsubchans = V4L2_TUNER_SUB_STEREO;
+	else
+		vm.txsubchans = V4L2_TUNER_SUB_MONO;
+	if (sdev->rds_enabled)
+		vm.txsubchans |= V4L2_TUNER_SUB_RDS;
+	si4713_s_modulator(&sdev->sd, &vm);
+
+	return rval;
+}
+
+/*
+ * si4713_initialize - Sets the device up with default configuration.
+ * @sdev: si4713_device structure for the device we are communicating
+ */
+static int si4713_initialize(struct si4713_device *sdev)
+{
+	int rval;
+
+	rval = si4713_set_power_state(sdev, POWER_ON);
+	if (rval < 0)
+		return rval;
+
+	rval = si4713_checkrev(sdev);
+	if (rval < 0)
+		return rval;
+
+	rval = si4713_set_power_state(sdev, POWER_OFF);
+	if (rval < 0)
+		return rval;
+
+	sdev->frequency = DEFAULT_FREQUENCY;
+	sdev->stereo = 1;
+	sdev->tune_rnl = DEFAULT_TUNE_RNL;
+	return 0;
+}
+
+/* si4713_s_ctrl - set the value of a control */
+static int si4713_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct si4713_device *sdev =
+		container_of(ctrl->handler, struct si4713_device, ctrl_handler);
+	u32 val = 0;
+	s32 bit = 0, mask = 0;
+	u16 property = 0;
+	int mul = 0;
+	unsigned long *table = NULL;
+	int size = 0;
+	bool force = false;
+	int c;
+	int ret = 0;
+
+	if (ctrl->id != V4L2_CID_AUDIO_MUTE)
+		return -EINVAL;
+	if (ctrl->is_new) {
+		if (ctrl->val) {
+			ret = si4713_set_mute(sdev, ctrl->val);
+			if (!ret)
+				ret = si4713_set_power_state(sdev, POWER_DOWN);
+			return ret;
+		}
+		ret = si4713_set_power_state(sdev, POWER_UP);
+		if (!ret)
+			ret = si4713_set_mute(sdev, ctrl->val);
+		if (!ret)
+			ret = si4713_setup(sdev);
+		if (ret)
+			return ret;
+		force = true;
+	}
+
+	if (!sdev->power_state)
+		return 0;
+
+	for (c = 1; !ret && c < ctrl->ncontrols; c++) {
+		ctrl = ctrl->cluster[c];
+
+		if (!force && !ctrl->is_new)
+			continue;
+
+		switch (ctrl->id) {
+		case V4L2_CID_RDS_TX_PS_NAME:
+			ret = si4713_set_rds_ps_name(sdev, ctrl->p_new.p_char);
+			break;
+
+		case V4L2_CID_RDS_TX_RADIO_TEXT:
+			ret = si4713_set_rds_radio_text(sdev, ctrl->p_new.p_char);
+			break;
+
+		case V4L2_CID_TUNE_ANTENNA_CAPACITOR:
+			/* don't handle this control if we force setting all
+			 * controls since in that case it will be handled by
+			 * V4L2_CID_TUNE_POWER_LEVEL. */
+			if (force)
+				break;
+			/* fall through */
+		case V4L2_CID_TUNE_POWER_LEVEL:
+			ret = si4713_tx_tune_power(sdev,
+				sdev->tune_pwr_level->val, sdev->tune_ant_cap->val);
+			if (!ret) {
+				/* Make sure we don't set this twice */
+				sdev->tune_ant_cap->is_new = false;
+				sdev->tune_pwr_level->is_new = false;
+			}
+			break;
+
+		case V4L2_CID_RDS_TX_ALT_FREQS_ENABLE:
+		case V4L2_CID_RDS_TX_ALT_FREQS:
+			if (sdev->rds_alt_freqs_enable->val) {
+				val = sdev->rds_alt_freqs->p_new.p_u32[0];
+				val = val / 100 - 876 + 0xe101;
+			} else {
+				val = 0xe0e0;
+			}
+			ret = si4713_write_property(sdev, SI4713_TX_RDS_PS_AF, val);
+			break;
+
+		default:
+			ret = si4713_choose_econtrol_action(sdev, ctrl->id, &bit,
+					&mask, &property, &mul, &table, &size);
+			if (ret < 0)
+				break;
+
+			val = ctrl->val;
+			if (mul) {
+				val = val / mul;
+			} else if (table) {
+				ret = usecs_to_dev(val, table, size);
+				if (ret < 0)
+					break;
+				val = ret;
+				ret = 0;
+			}
+
+			if (mask) {
+				ret = si4713_read_property(sdev, property, &val);
+				if (ret < 0)
+					break;
+				val = set_bits(val, ctrl->val, bit, mask);
+			}
+
+			ret = si4713_write_property(sdev, property, val);
+			if (ret < 0)
+				break;
+			if (mask)
+				val = ctrl->val;
+			break;
+		}
+	}
+
+	return ret;
+}
+
+/* si4713_ioctl - deal with private ioctls (only rnl for now) */
+static long si4713_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg)
+{
+	struct si4713_device *sdev = to_si4713_device(sd);
+	struct si4713_rnl *rnl = arg;
+	u16 frequency;
+	int rval = 0;
+
+	if (!arg)
+		return -EINVAL;
+
+	switch (cmd) {
+	case SI4713_IOC_MEASURE_RNL:
+		frequency = v4l2_to_si4713(rnl->frequency);
+
+		if (sdev->power_state) {
+			/* Set desired measurement frequency */
+			rval = si4713_tx_tune_measure(sdev, frequency, 0);
+			if (rval < 0)
+				return rval;
+			/* get results from tune status */
+			rval = si4713_update_tune_status(sdev);
+			if (rval < 0)
+				return rval;
+		}
+		rnl->rnl = sdev->tune_rnl;
+		break;
+
+	default:
+		/* nothing */
+		rval = -ENOIOCTLCMD;
+	}
+
+	return rval;
+}
+
+/* si4713_g_modulator - get modulator attributes */
+static int si4713_g_modulator(struct v4l2_subdev *sd, struct v4l2_modulator *vm)
+{
+	struct si4713_device *sdev = to_si4713_device(sd);
+	int rval = 0;
+
+	if (!sdev)
+		return -ENODEV;
+
+	if (vm->index > 0)
+		return -EINVAL;
+
+	strncpy(vm->name, "FM Modulator", 32);
+	vm->capability = V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_LOW |
+		V4L2_TUNER_CAP_RDS | V4L2_TUNER_CAP_RDS_CONTROLS;
+
+	/* Report current frequency range limits */
+	vm->rangelow = si4713_to_v4l2(FREQ_RANGE_LOW);
+	vm->rangehigh = si4713_to_v4l2(FREQ_RANGE_HIGH);
+
+	if (sdev->power_state) {
+		u32 comp_en = 0;
+
+		rval = si4713_read_property(sdev, SI4713_TX_COMPONENT_ENABLE,
+						&comp_en);
+		if (rval < 0)
+			return rval;
+
+		sdev->stereo = get_status_bit(comp_en, 1, 1 << 1);
+	}
+
+	/* Report current audio mode: mono or stereo */
+	if (sdev->stereo)
+		vm->txsubchans = V4L2_TUNER_SUB_STEREO;
+	else
+		vm->txsubchans = V4L2_TUNER_SUB_MONO;
+
+	/* Report rds feature status */
+	if (sdev->rds_enabled)
+		vm->txsubchans |= V4L2_TUNER_SUB_RDS;
+	else
+		vm->txsubchans &= ~V4L2_TUNER_SUB_RDS;
+
+	return rval;
+}
+
+/* si4713_s_modulator - set modulator attributes */
+static int si4713_s_modulator(struct v4l2_subdev *sd, const struct v4l2_modulator *vm)
+{
+	struct si4713_device *sdev = to_si4713_device(sd);
+	int rval = 0;
+	u16 stereo, rds;
+	u32 p;
+
+	if (!sdev)
+		return -ENODEV;
+
+	if (vm->index > 0)
+		return -EINVAL;
+
+	/* Set audio mode: mono or stereo */
+	if (vm->txsubchans & V4L2_TUNER_SUB_STEREO)
+		stereo = 1;
+	else if (vm->txsubchans & V4L2_TUNER_SUB_MONO)
+		stereo = 0;
+	else
+		return -EINVAL;
+
+	rds = !!(vm->txsubchans & V4L2_TUNER_SUB_RDS);
+
+	if (sdev->power_state) {
+		rval = si4713_read_property(sdev,
+						SI4713_TX_COMPONENT_ENABLE, &p);
+		if (rval < 0)
+			return rval;
+
+		p = set_bits(p, stereo, 1, 1 << 1);
+		p = set_bits(p, rds, 2, 1 << 2);
+
+		rval = si4713_write_property(sdev,
+						SI4713_TX_COMPONENT_ENABLE, p);
+		if (rval < 0)
+			return rval;
+	}
+
+	sdev->stereo = stereo;
+	sdev->rds_enabled = rds;
+
+	return rval;
+}
+
+/* si4713_g_frequency - get tuner or modulator radio frequency */
+static int si4713_g_frequency(struct v4l2_subdev *sd, struct v4l2_frequency *f)
+{
+	struct si4713_device *sdev = to_si4713_device(sd);
+	int rval = 0;
+
+	if (f->tuner)
+		return -EINVAL;
+
+	if (sdev->power_state) {
+		u16 freq;
+		u8 p, a, n;
+
+		rval = si4713_tx_tune_status(sdev, 0x00, &freq, &p, &a, &n);
+		if (rval < 0)
+			return rval;
+
+		sdev->frequency = freq;
+	}
+
+	f->frequency = si4713_to_v4l2(sdev->frequency);
+
+	return rval;
+}
+
+/* si4713_s_frequency - set tuner or modulator radio frequency */
+static int si4713_s_frequency(struct v4l2_subdev *sd, const struct v4l2_frequency *f)
+{
+	struct si4713_device *sdev = to_si4713_device(sd);
+	int rval = 0;
+	u16 frequency = v4l2_to_si4713(f->frequency);
+
+	if (f->tuner)
+		return -EINVAL;
+
+	/* Check frequency range */
+	frequency = clamp_t(u16, frequency, FREQ_RANGE_LOW, FREQ_RANGE_HIGH);
+
+	if (sdev->power_state) {
+		rval = si4713_tx_tune_freq(sdev, frequency);
+		if (rval < 0)
+			return rval;
+		frequency = rval;
+		rval = 0;
+	}
+	sdev->frequency = frequency;
+
+	return rval;
+}
+
+static const struct v4l2_ctrl_ops si4713_ctrl_ops = {
+	.s_ctrl = si4713_s_ctrl,
+};
+
+static const struct v4l2_subdev_core_ops si4713_subdev_core_ops = {
+	.ioctl		= si4713_ioctl,
+};
+
+static const struct v4l2_subdev_tuner_ops si4713_subdev_tuner_ops = {
+	.g_frequency	= si4713_g_frequency,
+	.s_frequency	= si4713_s_frequency,
+	.g_modulator	= si4713_g_modulator,
+	.s_modulator	= si4713_s_modulator,
+};
+
+static const struct v4l2_subdev_ops si4713_subdev_ops = {
+	.core		= &si4713_subdev_core_ops,
+	.tuner		= &si4713_subdev_tuner_ops,
+};
+
+static const struct v4l2_ctrl_config si4713_alt_freqs_ctrl = {
+	.id = V4L2_CID_RDS_TX_ALT_FREQS,
+	.type = V4L2_CTRL_TYPE_U32,
+	.min = 87600,
+	.max = 107900,
+	.step = 100,
+	.def = 87600,
+	.dims = { 1 },
+	.elem_size = sizeof(u32),
+};
+
+/*
+ * I2C driver interface
+ */
+/* si4713_probe - probe for the device */
+static int si4713_probe(struct i2c_client *client,
+					const struct i2c_device_id *id)
+{
+	struct si4713_device *sdev;
+	struct v4l2_ctrl_handler *hdl;
+	struct si4713_platform_data *pdata = client->dev.platform_data;
+	struct device_node *np = client->dev.of_node;
+	struct radio_si4713_platform_data si4713_pdev_pdata;
+	struct platform_device *si4713_pdev;
+	int rval;
+
+	sdev = devm_kzalloc(&client->dev, sizeof(*sdev), GFP_KERNEL);
+	if (!sdev) {
+		dev_err(&client->dev, "Failed to alloc video device.\n");
+		rval = -ENOMEM;
+		goto exit;
+	}
+
+	sdev->gpio_reset = devm_gpiod_get_optional(&client->dev, "reset",
+						   GPIOD_OUT_LOW);
+	if (IS_ERR(sdev->gpio_reset)) {
+		rval = PTR_ERR(sdev->gpio_reset);
+		dev_err(&client->dev, "Failed to request gpio: %d\n", rval);
+		goto exit;
+	}
+
+	sdev->vdd = devm_regulator_get_optional(&client->dev, "vdd");
+	if (IS_ERR(sdev->vdd)) {
+		rval = PTR_ERR(sdev->vdd);
+		if (rval == -EPROBE_DEFER)
+			goto exit;
+
+		dev_dbg(&client->dev, "no vdd regulator found: %d\n", rval);
+		sdev->vdd = NULL;
+	}
+
+	sdev->vio = devm_regulator_get_optional(&client->dev, "vio");
+	if (IS_ERR(sdev->vio)) {
+		rval = PTR_ERR(sdev->vio);
+		if (rval == -EPROBE_DEFER)
+			goto exit;
+
+		dev_dbg(&client->dev, "no vio regulator found: %d\n", rval);
+		sdev->vio = NULL;
+	}
+
+	v4l2_i2c_subdev_init(&sdev->sd, client, &si4713_subdev_ops);
+
+	init_completion(&sdev->work);
+
+	hdl = &sdev->ctrl_handler;
+	v4l2_ctrl_handler_init(hdl, 20);
+	sdev->mute = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
+			V4L2_CID_AUDIO_MUTE, 0, 1, 1, DEFAULT_MUTE);
+
+	sdev->rds_pi = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
+			V4L2_CID_RDS_TX_PI, 0, 0xffff, 1, DEFAULT_RDS_PI);
+	sdev->rds_pty = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
+			V4L2_CID_RDS_TX_PTY, 0, 31, 1, DEFAULT_RDS_PTY);
+	sdev->rds_compressed = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
+			V4L2_CID_RDS_TX_COMPRESSED, 0, 1, 1, 0);
+	sdev->rds_art_head = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
+			V4L2_CID_RDS_TX_ARTIFICIAL_HEAD, 0, 1, 1, 0);
+	sdev->rds_stereo = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
+			V4L2_CID_RDS_TX_MONO_STEREO, 0, 1, 1, 1);
+	sdev->rds_tp = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
+			V4L2_CID_RDS_TX_TRAFFIC_PROGRAM, 0, 1, 1, 0);
+	sdev->rds_ta = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
+			V4L2_CID_RDS_TX_TRAFFIC_ANNOUNCEMENT, 0, 1, 1, 0);
+	sdev->rds_ms = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
+			V4L2_CID_RDS_TX_MUSIC_SPEECH, 0, 1, 1, 1);
+	sdev->rds_dyn_pty = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
+			V4L2_CID_RDS_TX_DYNAMIC_PTY, 0, 1, 1, 0);
+	sdev->rds_alt_freqs_enable = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
+			V4L2_CID_RDS_TX_ALT_FREQS_ENABLE, 0, 1, 1, 0);
+	sdev->rds_alt_freqs = v4l2_ctrl_new_custom(hdl, &si4713_alt_freqs_ctrl, NULL);
+	sdev->rds_deviation = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
+			V4L2_CID_RDS_TX_DEVIATION, 0, MAX_RDS_DEVIATION,
+			10, DEFAULT_RDS_DEVIATION);
+	/*
+	 * Report step as 8. From RDS spec, psname
+	 * should be 8. But there are receivers which scroll strings
+	 * sized as 8xN.
+	 */
+	sdev->rds_ps_name = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
+			V4L2_CID_RDS_TX_PS_NAME, 0, MAX_RDS_PS_NAME, 8, 0);
+	/*
+	 * Report step as 32 (2A block). From RDS spec,
+	 * radio text should be 32 for 2A block. But there are receivers
+	 * which scroll strings sized as 32xN. Setting default to 32.
+	 */
+	sdev->rds_radio_text = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
+			V4L2_CID_RDS_TX_RADIO_TEXT, 0, MAX_RDS_RADIO_TEXT, 32, 0);
+
+	sdev->limiter_enabled = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
+			V4L2_CID_AUDIO_LIMITER_ENABLED, 0, 1, 1, 1);
+	sdev->limiter_release_time = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
+			V4L2_CID_AUDIO_LIMITER_RELEASE_TIME, 250,
+			MAX_LIMITER_RELEASE_TIME, 10, DEFAULT_LIMITER_RTIME);
+	sdev->limiter_deviation = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
+			V4L2_CID_AUDIO_LIMITER_DEVIATION, 0,
+			MAX_LIMITER_DEVIATION, 10, DEFAULT_LIMITER_DEV);
+
+	sdev->compression_enabled = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
+			V4L2_CID_AUDIO_COMPRESSION_ENABLED, 0, 1, 1, 1);
+	sdev->compression_gain = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
+			V4L2_CID_AUDIO_COMPRESSION_GAIN, 0, MAX_ACOMP_GAIN, 1,
+			DEFAULT_ACOMP_GAIN);
+	sdev->compression_threshold = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
+			V4L2_CID_AUDIO_COMPRESSION_THRESHOLD,
+			MIN_ACOMP_THRESHOLD, MAX_ACOMP_THRESHOLD, 1,
+			DEFAULT_ACOMP_THRESHOLD);
+	sdev->compression_attack_time = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
+			V4L2_CID_AUDIO_COMPRESSION_ATTACK_TIME, 0,
+			MAX_ACOMP_ATTACK_TIME, 500, DEFAULT_ACOMP_ATIME);
+	sdev->compression_release_time = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
+			V4L2_CID_AUDIO_COMPRESSION_RELEASE_TIME, 100000,
+			MAX_ACOMP_RELEASE_TIME, 100000, DEFAULT_ACOMP_RTIME);
+
+	sdev->pilot_tone_enabled = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
+			V4L2_CID_PILOT_TONE_ENABLED, 0, 1, 1, 1);
+	sdev->pilot_tone_deviation = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
+			V4L2_CID_PILOT_TONE_DEVIATION, 0, MAX_PILOT_DEVIATION,
+			10, DEFAULT_PILOT_DEVIATION);
+	sdev->pilot_tone_freq = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
+			V4L2_CID_PILOT_TONE_FREQUENCY, 0, MAX_PILOT_FREQUENCY,
+			1, DEFAULT_PILOT_FREQUENCY);
+
+	sdev->tune_preemphasis = v4l2_ctrl_new_std_menu(hdl, &si4713_ctrl_ops,
+			V4L2_CID_TUNE_PREEMPHASIS,
+			V4L2_PREEMPHASIS_75_uS, 0, V4L2_PREEMPHASIS_50_uS);
+	sdev->tune_pwr_level = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
+			V4L2_CID_TUNE_POWER_LEVEL, 0, SI4713_MAX_POWER,
+			1, DEFAULT_POWER_LEVEL);
+	sdev->tune_ant_cap = v4l2_ctrl_new_std(hdl, &si4713_ctrl_ops,
+			V4L2_CID_TUNE_ANTENNA_CAPACITOR, 0, SI4713_MAX_ANTCAP,
+			1, 0);
+
+	if (hdl->error) {
+		rval = hdl->error;
+		goto free_ctrls;
+	}
+	v4l2_ctrl_cluster(29, &sdev->mute);
+	sdev->sd.ctrl_handler = hdl;
+
+	if (client->irq) {
+		rval = devm_request_irq(&client->dev, client->irq,
+			si4713_handler, IRQF_TRIGGER_FALLING,
+			client->name, sdev);
+		if (rval < 0) {
+			v4l2_err(&sdev->sd, "Could not request IRQ\n");
+			goto free_ctrls;
+		}
+		v4l2_dbg(1, debug, &sdev->sd, "IRQ requested.\n");
+	} else {
+		v4l2_warn(&sdev->sd, "IRQ not configured. Using timeouts.\n");
+	}
+
+	rval = si4713_initialize(sdev);
+	if (rval < 0) {
+		v4l2_err(&sdev->sd, "Failed to probe device information.\n");
+		goto free_ctrls;
+	}
+
+	if (!np && (!pdata || !pdata->is_platform_device))
+		return 0;
+
+	si4713_pdev = platform_device_alloc("radio-si4713", -1);
+	if (!si4713_pdev)
+		goto put_main_pdev;
+
+	si4713_pdev_pdata.subdev = client;
+	rval = platform_device_add_data(si4713_pdev, &si4713_pdev_pdata,
+					sizeof(si4713_pdev_pdata));
+	if (rval)
+		goto put_main_pdev;
+
+	rval = platform_device_add(si4713_pdev);
+	if (rval)
+		goto put_main_pdev;
+
+	sdev->pd = si4713_pdev;
+
+	return 0;
+
+put_main_pdev:
+	platform_device_put(si4713_pdev);
+	v4l2_device_unregister_subdev(&sdev->sd);
+free_ctrls:
+	v4l2_ctrl_handler_free(hdl);
+exit:
+	return rval;
+}
+
+/* si4713_remove - remove the device */
+static int si4713_remove(struct i2c_client *client)
+{
+	struct v4l2_subdev *sd = i2c_get_clientdata(client);
+	struct si4713_device *sdev = to_si4713_device(sd);
+
+	platform_device_unregister(sdev->pd);
+
+	if (sdev->power_state)
+		si4713_set_power_state(sdev, POWER_DOWN);
+
+	v4l2_device_unregister_subdev(sd);
+	v4l2_ctrl_handler_free(sd->ctrl_handler);
+
+	return 0;
+}
+
+/* si4713_i2c_driver - i2c driver interface */
+static const struct i2c_device_id si4713_id[] = {
+	{ "si4713" , 0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, si4713_id);
+
+static struct i2c_driver si4713_i2c_driver = {
+	.driver		= {
+		.name	= "si4713",
+	},
+	.probe		= si4713_probe,
+	.remove         = si4713_remove,
+	.id_table       = si4713_id,
+};
+
+module_i2c_driver(si4713_i2c_driver);
diff --git a/drivers/media/radio/si4713/si4713.h b/drivers/media/radio/si4713/si4713.h
new file mode 100644
index 000000000..8a376e142
--- /dev/null
+++ b/drivers/media/radio/si4713/si4713.h
@@ -0,0 +1,254 @@
+/*
+ * drivers/media/radio/si4713-i2c.h
+ *
+ * Property and commands definitions for Si4713 radio transmitter chip.
+ *
+ * Copyright (c) 2008 Instituto Nokia de Tecnologia - INdT
+ * Contact: Eduardo Valentin <eduardo.valentin@nokia.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ *
+ */
+
+#ifndef SI4713_I2C_H
+#define SI4713_I2C_H
+
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/gpio/consumer.h>
+#include <media/v4l2-subdev.h>
+#include <media/v4l2-ctrls.h>
+#include <media/si4713.h>
+
+#define SI4713_PRODUCT_NUMBER		0x0D
+
+/* Command Timeouts */
+#define DEFAULT_TIMEOUT			500
+#define TIMEOUT_SET_PROPERTY		20
+#define TIMEOUT_TX_TUNE_POWER		30000
+#define TIMEOUT_TX_TUNE			110000
+#define TIMEOUT_POWER_UP		200000
+
+/*
+ * Command and its arguments definitions
+ */
+#define SI4713_PWUP_CTSIEN		(1<<7)
+#define SI4713_PWUP_GPO2OEN		(1<<6)
+#define SI4713_PWUP_PATCH		(1<<5)
+#define SI4713_PWUP_XOSCEN		(1<<4)
+#define SI4713_PWUP_FUNC_TX		0x02
+#define SI4713_PWUP_FUNC_PATCH		0x0F
+#define SI4713_PWUP_OPMOD_ANALOG	0x50
+#define SI4713_PWUP_OPMOD_DIGITAL	0x0F
+#define SI4713_PWUP_NARGS		2
+#define SI4713_PWUP_NRESP		1
+#define SI4713_CMD_POWER_UP		0x01
+
+#define SI4713_GETREV_NRESP		9
+#define SI4713_CMD_GET_REV		0x10
+
+#define SI4713_PWDN_NRESP		1
+#define SI4713_CMD_POWER_DOWN		0x11
+
+#define SI4713_SET_PROP_NARGS		5
+#define SI4713_SET_PROP_NRESP		1
+#define SI4713_CMD_SET_PROPERTY		0x12
+
+#define SI4713_GET_PROP_NARGS		3
+#define SI4713_GET_PROP_NRESP		4
+#define SI4713_CMD_GET_PROPERTY		0x13
+
+#define SI4713_GET_STATUS_NRESP		1
+#define SI4713_CMD_GET_INT_STATUS	0x14
+
+#define SI4713_CMD_PATCH_ARGS		0x15
+#define SI4713_CMD_PATCH_DATA		0x16
+
+#define SI4713_MAX_FREQ			10800
+#define SI4713_MIN_FREQ			7600
+#define SI4713_TXFREQ_NARGS		3
+#define SI4713_TXFREQ_NRESP		1
+#define SI4713_CMD_TX_TUNE_FREQ		0x30
+
+#define SI4713_MAX_POWER		120
+#define SI4713_MIN_POWER		88
+#define SI4713_MAX_ANTCAP		191
+#define SI4713_MIN_ANTCAP		0
+#define SI4713_TXPWR_NARGS		4
+#define SI4713_TXPWR_NRESP		1
+#define SI4713_CMD_TX_TUNE_POWER	0x31
+
+#define SI4713_TXMEA_NARGS		4
+#define SI4713_TXMEA_NRESP		1
+#define SI4713_CMD_TX_TUNE_MEASURE	0x32
+
+#define SI4713_INTACK_MASK		0x01
+#define SI4713_TXSTATUS_NARGS		1
+#define SI4713_TXSTATUS_NRESP		8
+#define SI4713_CMD_TX_TUNE_STATUS	0x33
+
+#define SI4713_OVERMOD_BIT		(1 << 2)
+#define SI4713_IALH_BIT			(1 << 1)
+#define SI4713_IALL_BIT			(1 << 0)
+#define SI4713_ASQSTATUS_NARGS		1
+#define SI4713_ASQSTATUS_NRESP		5
+#define SI4713_CMD_TX_ASQ_STATUS	0x34
+
+#define SI4713_RDSBUFF_MODE_MASK	0x87
+#define SI4713_RDSBUFF_NARGS		7
+#define SI4713_RDSBUFF_NRESP		6
+#define SI4713_CMD_TX_RDS_BUFF		0x35
+
+#define SI4713_RDSPS_PSID_MASK		0x1F
+#define SI4713_RDSPS_NARGS		5
+#define SI4713_RDSPS_NRESP		1
+#define SI4713_CMD_TX_RDS_PS		0x36
+
+#define SI4713_CMD_GPO_CTL		0x80
+#define SI4713_CMD_GPO_SET		0x81
+
+/*
+ * Bits from status response
+ */
+#define SI4713_CTS			(1<<7)
+#define SI4713_ERR			(1<<6)
+#define SI4713_RDS_INT			(1<<2)
+#define SI4713_ASQ_INT			(1<<1)
+#define SI4713_STC_INT			(1<<0)
+
+/*
+ * Property definitions
+ */
+#define SI4713_GPO_IEN			0x0001
+#define SI4713_DIG_INPUT_FORMAT		0x0101
+#define SI4713_DIG_INPUT_SAMPLE_RATE	0x0103
+#define SI4713_REFCLK_FREQ		0x0201
+#define SI4713_REFCLK_PRESCALE		0x0202
+#define SI4713_TX_COMPONENT_ENABLE	0x2100
+#define SI4713_TX_AUDIO_DEVIATION	0x2101
+#define SI4713_TX_PILOT_DEVIATION	0x2102
+#define SI4713_TX_RDS_DEVIATION		0x2103
+#define SI4713_TX_LINE_INPUT_LEVEL	0x2104
+#define SI4713_TX_LINE_INPUT_MUTE	0x2105
+#define SI4713_TX_PREEMPHASIS		0x2106
+#define SI4713_TX_PILOT_FREQUENCY	0x2107
+#define SI4713_TX_ACOMP_ENABLE		0x2200
+#define SI4713_TX_ACOMP_THRESHOLD	0x2201
+#define SI4713_TX_ACOMP_ATTACK_TIME	0x2202
+#define SI4713_TX_ACOMP_RELEASE_TIME	0x2203
+#define SI4713_TX_ACOMP_GAIN		0x2204
+#define SI4713_TX_LIMITER_RELEASE_TIME	0x2205
+#define SI4713_TX_ASQ_INTERRUPT_SOURCE	0x2300
+#define SI4713_TX_ASQ_LEVEL_LOW		0x2301
+#define SI4713_TX_ASQ_DURATION_LOW	0x2302
+#define SI4713_TX_ASQ_LEVEL_HIGH	0x2303
+#define SI4713_TX_ASQ_DURATION_HIGH	0x2304
+#define SI4713_TX_RDS_INTERRUPT_SOURCE	0x2C00
+#define SI4713_TX_RDS_PI		0x2C01
+#define SI4713_TX_RDS_PS_MIX		0x2C02
+#define SI4713_TX_RDS_PS_MISC		0x2C03
+#define SI4713_TX_RDS_PS_REPEAT_COUNT	0x2C04
+#define SI4713_TX_RDS_PS_MESSAGE_COUNT	0x2C05
+#define SI4713_TX_RDS_PS_AF		0x2C06
+#define SI4713_TX_RDS_FIFO_SIZE		0x2C07
+
+#define PREEMPHASIS_USA			75
+#define PREEMPHASIS_EU			50
+#define PREEMPHASIS_DISABLED		0
+#define FMPE_USA			0x00
+#define FMPE_EU				0x01
+#define FMPE_DISABLED			0x02
+
+#define POWER_UP			0x01
+#define POWER_DOWN			0x00
+
+#define MAX_RDS_PTY			31
+#define MAX_RDS_DEVIATION		90000
+
+/*
+ * PSNAME is known to be defined as 8 character sized (RDS Spec).
+ * However, there is receivers which scroll PSNAME 8xN sized.
+ */
+#define MAX_RDS_PS_NAME			96
+
+/*
+ * MAX_RDS_RADIO_TEXT is known to be defined as 32 (2A group) or 64 (2B group)
+ * character sized (RDS Spec).
+ * However, there is receivers which scroll them as well.
+ */
+#define MAX_RDS_RADIO_TEXT		384
+
+#define MAX_LIMITER_RELEASE_TIME	102390
+#define MAX_LIMITER_DEVIATION		90000
+
+#define MAX_PILOT_DEVIATION		90000
+#define MAX_PILOT_FREQUENCY		19000
+
+#define MAX_ACOMP_RELEASE_TIME		1000000
+#define MAX_ACOMP_ATTACK_TIME		5000
+#define MAX_ACOMP_THRESHOLD		0
+#define MIN_ACOMP_THRESHOLD		(-40)
+#define MAX_ACOMP_GAIN			20
+
+/*
+ * si4713_device - private data
+ */
+struct si4713_device {
+	/* v4l2_subdev and i2c reference (v4l2_subdev priv data) */
+	struct v4l2_subdev sd;
+	struct v4l2_ctrl_handler ctrl_handler;
+	/* private data structures */
+	struct { /* si4713 control cluster */
+		/* This is one big cluster since the mute control
+		 * powers off the device and after unmuting again all
+		 * controls need to be set at once. The only way of doing
+		 * that is by making it one big cluster. */
+		struct v4l2_ctrl *mute;
+		struct v4l2_ctrl *rds_ps_name;
+		struct v4l2_ctrl *rds_radio_text;
+		struct v4l2_ctrl *rds_pi;
+		struct v4l2_ctrl *rds_deviation;
+		struct v4l2_ctrl *rds_pty;
+		struct v4l2_ctrl *rds_compressed;
+		struct v4l2_ctrl *rds_art_head;
+		struct v4l2_ctrl *rds_stereo;
+		struct v4l2_ctrl *rds_ta;
+		struct v4l2_ctrl *rds_tp;
+		struct v4l2_ctrl *rds_ms;
+		struct v4l2_ctrl *rds_dyn_pty;
+		struct v4l2_ctrl *rds_alt_freqs_enable;
+		struct v4l2_ctrl *rds_alt_freqs;
+		struct v4l2_ctrl *compression_enabled;
+		struct v4l2_ctrl *compression_threshold;
+		struct v4l2_ctrl *compression_gain;
+		struct v4l2_ctrl *compression_attack_time;
+		struct v4l2_ctrl *compression_release_time;
+		struct v4l2_ctrl *pilot_tone_enabled;
+		struct v4l2_ctrl *pilot_tone_freq;
+		struct v4l2_ctrl *pilot_tone_deviation;
+		struct v4l2_ctrl *limiter_enabled;
+		struct v4l2_ctrl *limiter_deviation;
+		struct v4l2_ctrl *limiter_release_time;
+		struct v4l2_ctrl *tune_preemphasis;
+		struct v4l2_ctrl *tune_pwr_level;
+		struct v4l2_ctrl *tune_ant_cap;
+	};
+	struct completion work;
+	struct regulator *vdd;
+	struct regulator *vio;
+	struct gpio_desc *gpio_reset;
+	struct platform_device *pd;
+	u32 power_state;
+	u32 rds_enabled;
+	u32 frequency;
+	u32 preemphasis;
+	u32 stereo;
+	u32 tune_rnl;
+};
+
+struct radio_si4713_platform_data {
+	struct i2c_client *subdev;
+};
+#endif /* ifndef SI4713_I2C_H */