Initial import

1 files changed, 245 insertions, 0 deletions

diff --git a/drivers/media/rc/fintek-cir.h b/drivers/media/rc/fintek-cir.h
new file mode 100644
index 000000000..b698f3d2c
--- /dev/null
+++ b/drivers/media/rc/fintek-cir.h
@@ -0,0 +1,245 @@
+/*
+ * Driver for Feature Integration Technology Inc. (aka Fintek) LPC CIR
+ *
+ * Copyright (C) 2011 Jarod Wilson <jarod@redhat.com>
+ *
+ * Special thanks to Fintek for providing hardware and spec sheets.
+ * This driver is based upon the nuvoton, ite and ene drivers for
+ * similar hardware.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
+
+#include <linux/spinlock.h>
+#include <linux/ioctl.h>
+
+/* platform driver name to register */
+#define FINTEK_DRIVER_NAME	"fintek-cir"
+#define FINTEK_DESCRIPTION	"Fintek LPC SuperIO Consumer IR Transceiver"
+#define VENDOR_ID_FINTEK	0x1934
+
+
+/* debugging module parameter */
+static int debug;
+
+#define fit_pr(level, text, ...) \
+	printk(level KBUILD_MODNAME ": " text, ## __VA_ARGS__)
+
+#define fit_dbg(text, ...) \
+	if (debug) \
+		printk(KERN_DEBUG \
+			KBUILD_MODNAME ": " text "\n" , ## __VA_ARGS__)
+
+#define fit_dbg_verbose(text, ...) \
+	if (debug > 1) \
+		printk(KERN_DEBUG \
+			KBUILD_MODNAME ": " text "\n" , ## __VA_ARGS__)
+
+#define fit_dbg_wake(text, ...) \
+	if (debug > 2) \
+		printk(KERN_DEBUG \
+			KBUILD_MODNAME ": " text "\n" , ## __VA_ARGS__)
+
+
+#define TX_BUF_LEN 256
+#define RX_BUF_LEN 32
+
+struct fintek_dev {
+	struct pnp_dev *pdev;
+	struct rc_dev *rdev;
+
+	spinlock_t fintek_lock;
+
+	/* for rx */
+	u8 buf[RX_BUF_LEN];
+	unsigned int pkts;
+
+	struct {
+		spinlock_t lock;
+		u8 buf[TX_BUF_LEN];
+		unsigned int buf_count;
+		unsigned int cur_buf_num;
+		wait_queue_head_t queue;
+	} tx;
+
+	/* Config register index/data port pair */
+	u32 cr_ip;
+	u32 cr_dp;
+
+	/* hardware I/O settings */
+	unsigned long cir_addr;
+	int cir_irq;
+	int cir_port_len;
+
+	/* hardware id */
+	u8 chip_major;
+	u8 chip_minor;
+	u16 chip_vendor;
+	u8 logical_dev_cir;
+
+	/* hardware features */
+	bool hw_learning_capable;
+	bool hw_tx_capable;
+
+	/* rx settings */
+	bool learning_enabled;
+	bool carrier_detect_enabled;
+
+	enum {
+		CMD_HEADER = 0,
+		SUBCMD,
+		CMD_DATA,
+		PARSE_IRDATA,
+	} parser_state;
+
+	u8 cmd, rem;
+
+	/* carrier period = 1 / frequency */
+	u32 carrier;
+};
+
+/* buffer packet constants, largely identical to mceusb.c */
+#define BUF_PULSE_BIT		0x80
+#define BUF_LEN_MASK		0x1f
+#define BUF_SAMPLE_MASK		0x7f
+
+#define BUF_COMMAND_HEADER	0x9f
+#define BUF_COMMAND_MASK	0xe0
+#define BUF_COMMAND_NULL	0x00
+#define BUF_HW_CMD_HEADER	0xff
+#define BUF_CMD_G_REVISION	0x0b
+#define BUF_CMD_S_CARRIER	0x06
+#define BUF_CMD_S_TIMEOUT	0x0c
+#define BUF_CMD_SIG_END		0x01
+#define BUF_CMD_S_TXMASK	0x08
+#define BUF_CMD_S_RXSENSOR	0x14
+#define BUF_RSP_PULSE_COUNT	0x15
+
+#define CIR_SAMPLE_PERIOD	50
+
+/*
+ * Configuration Register:
+ *  Index Port
+ *  Data Port
+ */
+#define CR_INDEX_PORT		0x2e
+#define CR_DATA_PORT		0x2f
+
+/* Possible alternate values, depends on how the chip is wired */
+#define CR_INDEX_PORT2		0x4e
+#define CR_DATA_PORT2		0x4f
+
+/*
+ * GCR_CONFIG_PORT_SEL bit 4 specifies which Index Port value is
+ * active. 1 = 0x4e, 0 = 0x2e
+ */
+#define PORT_SEL_PORT_4E_EN	0x10
+
+/* Extended Function Mode enable/disable magic values */
+#define CONFIG_REG_ENABLE	0x87
+#define CONFIG_REG_DISABLE	0xaa
+
+/* Chip IDs found in CR_CHIP_ID_{HI,LO} */
+#define CHIP_ID_HIGH_F71809U	0x04
+#define CHIP_ID_LOW_F71809U	0x08
+
+/*
+ * Global control regs we need to care about:
+ *      Global Control                  def.
+ *      Register name           addr    val. */
+#define GCR_SOFTWARE_RESET	0x02 /* 0x00 */
+#define GCR_LOGICAL_DEV_NO	0x07 /* 0x00 */
+#define GCR_CHIP_ID_HI		0x20 /* 0x04 */
+#define GCR_CHIP_ID_LO		0x21 /* 0x08 */
+#define GCR_VENDOR_ID_HI	0x23 /* 0x19 */
+#define GCR_VENDOR_ID_LO	0x24 /* 0x34 */
+#define GCR_CONFIG_PORT_SEL	0x25 /* 0x01 */
+#define GCR_KBMOUSE_WAKEUP	0x27
+
+#define LOGICAL_DEV_DISABLE	0x00
+#define LOGICAL_DEV_ENABLE	0x01
+
+/* Logical device number of the CIR function */
+#define LOGICAL_DEV_CIR_REV1	0x05
+#define LOGICAL_DEV_CIR_REV2	0x08
+
+/* CIR Logical Device (LDN 0x08) config registers */
+#define CIR_CR_COMMAND_INDEX	0x04
+#define CIR_CR_IRCS		0x05 /* Before host writes command to IR, host
+					must set to 1. When host finshes write
+					command to IR, host must clear to 0. */
+#define CIR_CR_COMMAND_DATA	0x06 /* Host read or write comand data */
+#define CIR_CR_CLASS		0x07 /* 0xff = rx-only, 0x66 = rx + 2 tx,
+					0x33 = rx + 1 tx */
+#define CIR_CR_DEV_EN		0x30 /* bit0 = 1 enables CIR */
+#define CIR_CR_BASE_ADDR_HI	0x60 /* MSB of CIR IO base addr */
+#define CIR_CR_BASE_ADDR_LO	0x61 /* LSB of CIR IO base addr */
+#define CIR_CR_IRQ_SEL		0x70 /* bits3-0 store CIR IRQ */
+#define CIR_CR_PSOUT_STATUS	0xf1
+#define CIR_CR_WAKE_KEY3_ADDR	0xf8
+#define CIR_CR_WAKE_KEY3_CODE	0xf9
+#define CIR_CR_WAKE_KEY3_DC	0xfa
+#define CIR_CR_WAKE_CONTROL	0xfb
+#define CIR_CR_WAKE_KEY12_ADDR	0xfc
+#define CIR_CR_WAKE_KEY4_ADDR	0xfd
+#define CIR_CR_WAKE_KEY5_ADDR	0xfe
+
+#define CLASS_RX_ONLY		0xff
+#define CLASS_RX_2TX		0x66
+#define CLASS_RX_1TX		0x33
+
+/* CIR device registers */
+#define CIR_STATUS		0x00
+#define CIR_RX_DATA		0x01
+#define CIR_TX_CONTROL		0x02
+#define CIR_TX_DATA		0x03
+#define CIR_CONTROL		0x04
+
+/* Bits to enable CIR wake */
+#define LOGICAL_DEV_ACPI	0x01
+#define LDEV_ACPI_WAKE_EN_REG	0xe8
+#define ACPI_WAKE_EN_CIR_BIT	0x04
+
+#define LDEV_ACPI_PME_EN_REG	0xf0
+#define LDEV_ACPI_PME_CLR_REG	0xf1
+#define ACPI_PME_CIR_BIT	0x02
+
+#define LDEV_ACPI_STATE_REG	0xf4
+#define ACPI_STATE_CIR_BIT	0x20
+
+/*
+ * CIR status register (0x00):
+ *   7 - CIR_IRQ_EN (1 = enable CIR IRQ, 0 = disable)
+ *   3 - TX_FINISH (1 when TX finished, write 1 to clear)
+ *   2 - TX_UNDERRUN (1 on TX underrun, write 1 to clear)
+ *   1 - RX_TIMEOUT (1 on RX timeout, write 1 to clear)
+ *   0 - RX_RECEIVE (1 on RX receive, write 1 to clear)
+ */
+#define CIR_STATUS_IRQ_EN	0x80
+#define CIR_STATUS_TX_FINISH	0x08
+#define CIR_STATUS_TX_UNDERRUN	0x04
+#define CIR_STATUS_RX_TIMEOUT	0x02
+#define CIR_STATUS_RX_RECEIVE	0x01
+#define CIR_STATUS_IRQ_MASK	0x0f
+
+/*
+ * CIR TX control register (0x02):
+ *   7 - TX_START (1 to indicate TX start, auto-cleared when done)
+ *   6 - TX_END (1 to indicate TX data written to TX fifo)
+ */
+#define CIR_TX_CONTROL_TX_START	0x80
+#define CIR_TX_CONTROL_TX_END	0x40
+