Initial import

1 files changed, 77 insertions, 0 deletions

diff --git a/drivers/media/rc/img-ir/Kconfig b/drivers/media/rc/img-ir/Kconfig
new file mode 100644
index 000000000..a896d3c83
--- /dev/null
+++ b/drivers/media/rc/img-ir/Kconfig
@@ -0,0 +1,77 @@
+config IR_IMG
+	tristate "ImgTec IR Decoder"
+	depends on RC_CORE
+	depends on METAG || MIPS || COMPILE_TEST
+	select IR_IMG_HW if !IR_IMG_RAW
+	help
+	   Say Y or M here if you want to use the ImgTec infrared decoder
+	   functionality found in SoCs such as TZ1090.
+
+config IR_IMG_RAW
+	bool "Raw decoder"
+	depends on IR_IMG
+	help
+	   Say Y here to enable the raw mode driver which passes raw IR signal
+	   changes to the IR raw decoders for software decoding. This is much
+	   less reliable (due to lack of timestamps) and consumes more
+	   processing power than using hardware decode, but can be useful for
+	   testing, debug, and to make more protocols available.
+
+config IR_IMG_HW
+	bool "Hardware decoder"
+	depends on IR_IMG
+	help
+	   Say Y here to enable the hardware decode driver which decodes the IR
+	   signals in hardware. This is more reliable, consumes less processing
+	   power since only a single interrupt is received for each scancode,
+	   and allows an IR scancode to be used as a wake event.
+
+config IR_IMG_NEC
+	bool "NEC protocol support"
+	depends on IR_IMG_HW
+	help
+	   Say Y here to enable support for the NEC, extended NEC, and 32-bit
+	   NEC protocols in the ImgTec infrared decoder block.
+
+config IR_IMG_JVC
+	bool "JVC protocol support"
+	depends on IR_IMG_HW
+	help
+	   Say Y here to enable support for the JVC protocol in the ImgTec
+	   infrared decoder block.
+
+config IR_IMG_SONY
+	bool "Sony protocol support"
+	depends on IR_IMG_HW
+	help
+	   Say Y here to enable support for the Sony protocol in the ImgTec
+	   infrared decoder block.
+
+config IR_IMG_SHARP
+	bool "Sharp protocol support"
+	depends on IR_IMG_HW
+	help
+	   Say Y here to enable support for the Sharp protocol in the ImgTec
+	   infrared decoder block.
+
+config IR_IMG_SANYO
+	bool "Sanyo protocol support"
+	depends on IR_IMG_HW
+	help
+	   Say Y here to enable support for the Sanyo protocol (used by Sanyo,
+	   Aiwa, Chinon remotes) in the ImgTec infrared decoder block.
+
+config IR_IMG_RC5
+	bool "Philips RC5 protocol support"
+	depends on IR_IMG_HW
+	help
+	   Say Y here to enable support for the RC5 protocol in the ImgTec
+	   infrared decoder block.
+
+config IR_IMG_RC6
+	bool "Philips RC6 protocol support"
+	depends on IR_IMG_HW
+	help
+	   Say Y here to enable support for the RC6 protocol in the ImgTec
+	   infrared decoder block.
+	   Note: This version only supports mode 0.