Initial import

1 files changed, 1788 insertions, 0 deletions

diff --git a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
new file mode 100644
index 000000000..895441fe9
--- /dev/null
+++ b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
@@ -0,0 +1,1788 @@
+/*
+ * Realtek RTL28xxU DVB USB driver
+ *
+ * Copyright (C) 2009 Antti Palosaari <crope@iki.fi>
+ * Copyright (C) 2011 Antti Palosaari <crope@iki.fi>
+ * Copyright (C) 2012 Thomas Mair <thomas.mair86@googlemail.com>
+ *
+ *    This program is free software; you can redistribute it and/or modify
+ *    it under the terms of the GNU General Public License as published by
+ *    the Free Software Foundation; either version 2 of the License, or
+ *    (at your option) any later version.
+ *
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU General Public License for more details.
+ *
+ *    You should have received a copy of the GNU General Public License along
+ *    with this program; if not, write to the Free Software Foundation, Inc.,
+ *    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include "rtl28xxu.h"
+
+static int rtl28xxu_disable_rc;
+module_param_named(disable_rc, rtl28xxu_disable_rc, int, 0644);
+MODULE_PARM_DESC(disable_rc, "disable RTL2832U remote controller");
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+static int rtl28xxu_ctrl_msg(struct dvb_usb_device *d, struct rtl28xxu_req *req)
+{
+	struct rtl28xxu_dev *dev = d->priv;
+	int ret;
+	unsigned int pipe;
+	u8 requesttype;
+
+	if (req->index & CMD_WR_FLAG) {
+		/* write */
+		memcpy(dev->buf, req->data, req->size);
+		requesttype = (USB_TYPE_VENDOR | USB_DIR_OUT);
+		pipe = usb_sndctrlpipe(d->udev, 0);
+	} else {
+		/* read */
+		requesttype = (USB_TYPE_VENDOR | USB_DIR_IN);
+		pipe = usb_rcvctrlpipe(d->udev, 0);
+	}
+
+	ret = usb_control_msg(d->udev, pipe, 0, requesttype, req->value,
+			req->index, dev->buf, req->size, 1000);
+	dvb_usb_dbg_usb_control_msg(d->udev, 0, requesttype, req->value,
+			req->index, dev->buf, req->size);
+	if (ret < 0)
+		goto err;
+
+	/* read request, copy returned data to return buf */
+	if (requesttype == (USB_TYPE_VENDOR | USB_DIR_IN))
+		memcpy(req->data, dev->buf, req->size);
+
+	return 0;
+err:
+	dev_dbg(&d->intf->dev, "failed=%d\n", ret);
+	return ret;
+}
+
+static int rtl28xxu_wr_regs(struct dvb_usb_device *d, u16 reg, u8 *val, int len)
+{
+	struct rtl28xxu_req req;
+
+	if (reg < 0x3000)
+		req.index = CMD_USB_WR;
+	else if (reg < 0x4000)
+		req.index = CMD_SYS_WR;
+	else
+		req.index = CMD_IR_WR;
+
+	req.value = reg;
+	req.size = len;
+	req.data = val;
+
+	return rtl28xxu_ctrl_msg(d, &req);
+}
+
+static int rtl28xxu_rd_regs(struct dvb_usb_device *d, u16 reg, u8 *val, int len)
+{
+	struct rtl28xxu_req req;
+
+	if (reg < 0x3000)
+		req.index = CMD_USB_RD;
+	else if (reg < 0x4000)
+		req.index = CMD_SYS_RD;
+	else
+		req.index = CMD_IR_RD;
+
+	req.value = reg;
+	req.size = len;
+	req.data = val;
+
+	return rtl28xxu_ctrl_msg(d, &req);
+}
+
+static int rtl28xxu_wr_reg(struct dvb_usb_device *d, u16 reg, u8 val)
+{
+	return rtl28xxu_wr_regs(d, reg, &val, 1);
+}
+
+static int rtl28xxu_rd_reg(struct dvb_usb_device *d, u16 reg, u8 *val)
+{
+	return rtl28xxu_rd_regs(d, reg, val, 1);
+}
+
+static int rtl28xxu_wr_reg_mask(struct dvb_usb_device *d, u16 reg, u8 val,
+		u8 mask)
+{
+	int ret;
+	u8 tmp;
+
+	/* no need for read if whole reg is written */
+	if (mask != 0xff) {
+		ret = rtl28xxu_rd_reg(d, reg, &tmp);
+		if (ret)
+			return ret;
+
+		val &= mask;
+		tmp &= ~mask;
+		val |= tmp;
+	}
+
+	return rtl28xxu_wr_reg(d, reg, val);
+}
+
+/* I2C */
+static int rtl28xxu_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
+	int num)
+{
+	int ret;
+	struct dvb_usb_device *d = i2c_get_adapdata(adap);
+	struct rtl28xxu_dev *dev = d->priv;
+	struct rtl28xxu_req req;
+
+	/*
+	 * It is not known which are real I2C bus xfer limits, but testing
+	 * with RTL2831U + MT2060 gives max RD 24 and max WR 22 bytes.
+	 * TODO: find out RTL2832U lens
+	 */
+
+	/*
+	 * I2C adapter logic looks rather complicated due to fact it handles
+	 * three different access methods. Those methods are;
+	 * 1) integrated demod access
+	 * 2) old I2C access
+	 * 3) new I2C access
+	 *
+	 * Used method is selected in order 1, 2, 3. Method 3 can handle all
+	 * requests but there is two reasons why not use it always;
+	 * 1) It is most expensive, usually two USB messages are needed
+	 * 2) At least RTL2831U does not support it
+	 *
+	 * Method 3 is needed in case of I2C write+read (typical register read)
+	 * where write is more than one byte.
+	 */
+
+	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
+		return -EAGAIN;
+
+	if (num == 2 && !(msg[0].flags & I2C_M_RD) &&
+		(msg[1].flags & I2C_M_RD)) {
+		if (msg[0].len > 24 || msg[1].len > 24) {
+			/* TODO: check msg[0].len max */
+			ret = -EOPNOTSUPP;
+			goto err_mutex_unlock;
+		} else if (msg[0].addr == 0x10) {
+			/* method 1 - integrated demod */
+			req.value = (msg[0].buf[0] << 8) | (msg[0].addr << 1);
+			req.index = CMD_DEMOD_RD | dev->page;
+			req.size = msg[1].len;
+			req.data = &msg[1].buf[0];
+			ret = rtl28xxu_ctrl_msg(d, &req);
+		} else if (msg[0].len < 2) {
+			/* method 2 - old I2C */
+			req.value = (msg[0].buf[0] << 8) | (msg[0].addr << 1);
+			req.index = CMD_I2C_RD;
+			req.size = msg[1].len;
+			req.data = &msg[1].buf[0];
+			ret = rtl28xxu_ctrl_msg(d, &req);
+		} else {
+			/* method 3 - new I2C */
+			req.value = (msg[0].addr << 1);
+			req.index = CMD_I2C_DA_WR;
+			req.size = msg[0].len;
+			req.data = msg[0].buf;
+			ret = rtl28xxu_ctrl_msg(d, &req);
+			if (ret)
+				goto err_mutex_unlock;
+
+			req.value = (msg[0].addr << 1);
+			req.index = CMD_I2C_DA_RD;
+			req.size = msg[1].len;
+			req.data = msg[1].buf;
+			ret = rtl28xxu_ctrl_msg(d, &req);
+		}
+	} else if (num == 1 && !(msg[0].flags & I2C_M_RD)) {
+		if (msg[0].len > 22) {
+			/* TODO: check msg[0].len max */
+			ret = -EOPNOTSUPP;
+			goto err_mutex_unlock;
+		} else if (msg[0].addr == 0x10) {
+			/* method 1 - integrated demod */
+			if (msg[0].buf[0] == 0x00) {
+				/* save demod page for later demod access */
+				dev->page = msg[0].buf[1];
+				ret = 0;
+			} else {
+				req.value = (msg[0].buf[0] << 8) |
+					(msg[0].addr << 1);
+				req.index = CMD_DEMOD_WR | dev->page;
+				req.size = msg[0].len-1;
+				req.data = &msg[0].buf[1];
+				ret = rtl28xxu_ctrl_msg(d, &req);
+			}
+		} else if (msg[0].len < 23) {
+			/* method 2 - old I2C */
+			req.value = (msg[0].buf[0] << 8) | (msg[0].addr << 1);
+			req.index = CMD_I2C_WR;
+			req.size = msg[0].len-1;
+			req.data = &msg[0].buf[1];
+			ret = rtl28xxu_ctrl_msg(d, &req);
+		} else {
+			/* method 3 - new I2C */
+			req.value = (msg[0].addr << 1);
+			req.index = CMD_I2C_DA_WR;
+			req.size = msg[0].len;
+			req.data = msg[0].buf;
+			ret = rtl28xxu_ctrl_msg(d, &req);
+		}
+	} else {
+		ret = -EINVAL;
+	}
+
+err_mutex_unlock:
+	mutex_unlock(&d->i2c_mutex);
+
+	return ret ? ret : num;
+}
+
+static u32 rtl28xxu_i2c_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_I2C;
+}
+
+static struct i2c_algorithm rtl28xxu_i2c_algo = {
+	.master_xfer   = rtl28xxu_i2c_xfer,
+	.functionality = rtl28xxu_i2c_func,
+};
+
+static int rtl2831u_read_config(struct dvb_usb_device *d)
+{
+	struct rtl28xxu_dev *dev = d_to_priv(d);
+	int ret;
+	u8 buf[1];
+	/* open RTL2831U/RTL2830 I2C gate */
+	struct rtl28xxu_req req_gate_open = {0x0120, 0x0011, 0x0001, "\x08"};
+	/* tuner probes */
+	struct rtl28xxu_req req_mt2060 = {0x00c0, CMD_I2C_RD, 1, buf};
+	struct rtl28xxu_req req_qt1010 = {0x0fc4, CMD_I2C_RD, 1, buf};
+
+	dev_dbg(&d->intf->dev, "\n");
+
+	/*
+	 * RTL2831U GPIOs
+	 * =========================================================
+	 * GPIO0 | tuner#0 | 0 off | 1 on  | MXL5005S (?)
+	 * GPIO2 | LED     | 0 off | 1 on  |
+	 * GPIO4 | tuner#1 | 0 on  | 1 off | MT2060
+	 */
+
+	/* GPIO direction */
+	ret = rtl28xxu_wr_reg(d, SYS_GPIO_DIR, 0x0a);
+	if (ret)
+		goto err;
+
+	/* enable as output GPIO0, GPIO2, GPIO4 */
+	ret = rtl28xxu_wr_reg(d, SYS_GPIO_OUT_EN, 0x15);
+	if (ret)
+		goto err;
+
+	/*
+	 * Probe used tuner. We need to know used tuner before demod attach
+	 * since there is some demod params needed to set according to tuner.
+	 */
+
+	/* demod needs some time to wake up */
+	msleep(20);
+
+	dev->tuner_name = "NONE";
+
+	/* open demod I2C gate */
+	ret = rtl28xxu_ctrl_msg(d, &req_gate_open);
+	if (ret)
+		goto err;
+
+	/* check QT1010 ID(?) register; reg=0f val=2c */
+	ret = rtl28xxu_ctrl_msg(d, &req_qt1010);
+	if (ret == 0 && buf[0] == 0x2c) {
+		dev->tuner = TUNER_RTL2830_QT1010;
+		dev->tuner_name = "QT1010";
+		goto found;
+	}
+
+	/* open demod I2C gate */
+	ret = rtl28xxu_ctrl_msg(d, &req_gate_open);
+	if (ret)
+		goto err;
+
+	/* check MT2060 ID register; reg=00 val=63 */
+	ret = rtl28xxu_ctrl_msg(d, &req_mt2060);
+	if (ret == 0 && buf[0] == 0x63) {
+		dev->tuner = TUNER_RTL2830_MT2060;
+		dev->tuner_name = "MT2060";
+		goto found;
+	}
+
+	/* assume MXL5005S */
+	dev->tuner = TUNER_RTL2830_MXL5005S;
+	dev->tuner_name = "MXL5005S";
+	goto found;
+
+found:
+	dev_dbg(&d->intf->dev, "tuner=%s\n", dev->tuner_name);
+
+	return 0;
+err:
+	dev_dbg(&d->intf->dev, "failed=%d\n", ret);
+	return ret;
+}
+
+static int rtl2832u_read_config(struct dvb_usb_device *d)
+{
+	struct rtl28xxu_dev *dev = d_to_priv(d);
+	int ret;
+	u8 buf[2];
+	/* open RTL2832U/RTL2832 I2C gate */
+	struct rtl28xxu_req req_gate_open = {0x0120, 0x0011, 0x0001, "\x18"};
+	/* close RTL2832U/RTL2832 I2C gate */
+	struct rtl28xxu_req req_gate_close = {0x0120, 0x0011, 0x0001, "\x10"};
+	/* tuner probes */
+	struct rtl28xxu_req req_fc0012 = {0x00c6, CMD_I2C_RD, 1, buf};
+	struct rtl28xxu_req req_fc0013 = {0x00c6, CMD_I2C_RD, 1, buf};
+	struct rtl28xxu_req req_mt2266 = {0x00c0, CMD_I2C_RD, 1, buf};
+	struct rtl28xxu_req req_fc2580 = {0x01ac, CMD_I2C_RD, 1, buf};
+	struct rtl28xxu_req req_mt2063 = {0x00c0, CMD_I2C_RD, 1, buf};
+	struct rtl28xxu_req req_max3543 = {0x00c0, CMD_I2C_RD, 1, buf};
+	struct rtl28xxu_req req_tua9001 = {0x7ec0, CMD_I2C_RD, 2, buf};
+	struct rtl28xxu_req req_mxl5007t = {0xd9c0, CMD_I2C_RD, 1, buf};
+	struct rtl28xxu_req req_e4000 = {0x02c8, CMD_I2C_RD, 1, buf};
+	struct rtl28xxu_req req_tda18272 = {0x00c0, CMD_I2C_RD, 2, buf};
+	struct rtl28xxu_req req_r820t = {0x0034, CMD_I2C_RD, 1, buf};
+	struct rtl28xxu_req req_r828d = {0x0074, CMD_I2C_RD, 1, buf};
+	struct rtl28xxu_req req_mn88472 = {0xff38, CMD_I2C_RD, 1, buf};
+	struct rtl28xxu_req req_mn88473 = {0xff38, CMD_I2C_RD, 1, buf};
+
+	dev_dbg(&d->intf->dev, "\n");
+
+	/* enable GPIO3 and GPIO6 as output */
+	ret = rtl28xxu_wr_reg_mask(d, SYS_GPIO_DIR, 0x00, 0x40);
+	if (ret)
+		goto err;
+
+	ret = rtl28xxu_wr_reg_mask(d, SYS_GPIO_OUT_EN, 0x48, 0x48);
+	if (ret)
+		goto err;
+
+	/*
+	 * Probe used tuner. We need to know used tuner before demod attach
+	 * since there is some demod params needed to set according to tuner.
+	 */
+
+	/* open demod I2C gate */
+	ret = rtl28xxu_ctrl_msg(d, &req_gate_open);
+	if (ret)
+		goto err;
+
+	dev->tuner_name = "NONE";
+
+	/* check FC0012 ID register; reg=00 val=a1 */
+	ret = rtl28xxu_ctrl_msg(d, &req_fc0012);
+	if (ret == 0 && buf[0] == 0xa1) {
+		dev->tuner = TUNER_RTL2832_FC0012;
+		dev->tuner_name = "FC0012";
+		goto tuner_found;
+	}
+
+	/* check FC0013 ID register; reg=00 val=a3 */
+	ret = rtl28xxu_ctrl_msg(d, &req_fc0013);
+	if (ret == 0 && buf[0] == 0xa3) {
+		dev->tuner = TUNER_RTL2832_FC0013;
+		dev->tuner_name = "FC0013";
+		goto tuner_found;
+	}
+
+	/* check MT2266 ID register; reg=00 val=85 */
+	ret = rtl28xxu_ctrl_msg(d, &req_mt2266);
+	if (ret == 0 && buf[0] == 0x85) {
+		dev->tuner = TUNER_RTL2832_MT2266;
+		dev->tuner_name = "MT2266";
+		goto tuner_found;
+	}
+
+	/* check FC2580 ID register; reg=01 val=56 */
+	ret = rtl28xxu_ctrl_msg(d, &req_fc2580);
+	if (ret == 0 && buf[0] == 0x56) {
+		dev->tuner = TUNER_RTL2832_FC2580;
+		dev->tuner_name = "FC2580";
+		goto tuner_found;
+	}
+
+	/* check MT2063 ID register; reg=00 val=9e || 9c */
+	ret = rtl28xxu_ctrl_msg(d, &req_mt2063);
+	if (ret == 0 && (buf[0] == 0x9e || buf[0] == 0x9c)) {
+		dev->tuner = TUNER_RTL2832_MT2063;
+		dev->tuner_name = "MT2063";
+		goto tuner_found;
+	}
+
+	/* check MAX3543 ID register; reg=00 val=38 */
+	ret = rtl28xxu_ctrl_msg(d, &req_max3543);
+	if (ret == 0 && buf[0] == 0x38) {
+		dev->tuner = TUNER_RTL2832_MAX3543;
+		dev->tuner_name = "MAX3543";
+		goto tuner_found;
+	}
+
+	/* check TUA9001 ID register; reg=7e val=2328 */
+	ret = rtl28xxu_ctrl_msg(d, &req_tua9001);
+	if (ret == 0 && buf[0] == 0x23 && buf[1] == 0x28) {
+		dev->tuner = TUNER_RTL2832_TUA9001;
+		dev->tuner_name = "TUA9001";
+		goto tuner_found;
+	}
+
+	/* check MXL5007R ID register; reg=d9 val=14 */
+	ret = rtl28xxu_ctrl_msg(d, &req_mxl5007t);
+	if (ret == 0 && buf[0] == 0x14) {
+		dev->tuner = TUNER_RTL2832_MXL5007T;
+		dev->tuner_name = "MXL5007T";
+		goto tuner_found;
+	}
+
+	/* check E4000 ID register; reg=02 val=40 */
+	ret = rtl28xxu_ctrl_msg(d, &req_e4000);
+	if (ret == 0 && buf[0] == 0x40) {
+		dev->tuner = TUNER_RTL2832_E4000;
+		dev->tuner_name = "E4000";
+		goto tuner_found;
+	}
+
+	/* check TDA18272 ID register; reg=00 val=c760  */
+	ret = rtl28xxu_ctrl_msg(d, &req_tda18272);
+	if (ret == 0 && (buf[0] == 0xc7 || buf[1] == 0x60)) {
+		dev->tuner = TUNER_RTL2832_TDA18272;
+		dev->tuner_name = "TDA18272";
+		goto tuner_found;
+	}
+
+	/* check R820T ID register; reg=00 val=69 */
+	ret = rtl28xxu_ctrl_msg(d, &req_r820t);
+	if (ret == 0 && buf[0] == 0x69) {
+		dev->tuner = TUNER_RTL2832_R820T;
+		dev->tuner_name = "R820T";
+		goto tuner_found;
+	}
+
+	/* check R828D ID register; reg=00 val=69 */
+	ret = rtl28xxu_ctrl_msg(d, &req_r828d);
+	if (ret == 0 && buf[0] == 0x69) {
+		dev->tuner = TUNER_RTL2832_R828D;
+		dev->tuner_name = "R828D";
+		goto tuner_found;
+	}
+
+tuner_found:
+	dev_dbg(&d->intf->dev, "tuner=%s\n", dev->tuner_name);
+
+	/* probe slave demod */
+	if (dev->tuner == TUNER_RTL2832_R828D) {
+		/* power on MN88472 demod on GPIO0 */
+		ret = rtl28xxu_wr_reg_mask(d, SYS_GPIO_OUT_VAL, 0x01, 0x01);
+		if (ret)
+			goto err;
+
+		ret = rtl28xxu_wr_reg_mask(d, SYS_GPIO_DIR, 0x00, 0x01);
+		if (ret)
+			goto err;
+
+		ret = rtl28xxu_wr_reg_mask(d, SYS_GPIO_OUT_EN, 0x01, 0x01);
+		if (ret)
+			goto err;
+
+		/* check MN88472 answers */
+		ret = rtl28xxu_ctrl_msg(d, &req_mn88472);
+		if (ret == 0 && buf[0] == 0x02) {
+			dev_dbg(&d->intf->dev, "MN88472 found\n");
+			dev->slave_demod = SLAVE_DEMOD_MN88472;
+			goto demod_found;
+		}
+
+		ret = rtl28xxu_ctrl_msg(d, &req_mn88473);
+		if (ret == 0 && buf[0] == 0x03) {
+			dev_dbg(&d->intf->dev, "MN88473 found\n");
+			dev->slave_demod = SLAVE_DEMOD_MN88473;
+			goto demod_found;
+		}
+	}
+
+demod_found:
+	/* close demod I2C gate */
+	ret = rtl28xxu_ctrl_msg(d, &req_gate_close);
+	if (ret < 0)
+		goto err;
+
+	return 0;
+err:
+	dev_dbg(&d->intf->dev, "failed=%d\n", ret);
+	return ret;
+}
+
+static int rtl28xxu_read_config(struct dvb_usb_device *d)
+{
+	struct rtl28xxu_dev *dev = d_to_priv(d);
+
+	if (dev->chip_id == CHIP_ID_RTL2831U)
+		return rtl2831u_read_config(d);
+	else
+		return rtl2832u_read_config(d);
+}
+
+static int rtl28xxu_identify_state(struct dvb_usb_device *d, const char **name)
+{
+	struct rtl28xxu_dev *dev = d_to_priv(d);
+	int ret;
+	struct rtl28xxu_req req_demod_i2c = {0x0020, CMD_I2C_DA_RD, 0, NULL};
+
+	dev_dbg(&d->intf->dev, "\n");
+
+	/*
+	 * Detect chip type using I2C command that is not supported
+	 * by old RTL2831U.
+	 */
+	ret = rtl28xxu_ctrl_msg(d, &req_demod_i2c);
+	if (ret == -EPIPE) {
+		dev->chip_id = CHIP_ID_RTL2831U;
+	} else if (ret == 0) {
+		dev->chip_id = CHIP_ID_RTL2832U;
+	} else {
+		dev_err(&d->intf->dev, "chip type detection failed %d\n", ret);
+		goto err;
+	}
+	dev_dbg(&d->intf->dev, "chip_id=%u\n", dev->chip_id);
+
+	return WARM;
+err:
+	dev_dbg(&d->intf->dev, "failed=%d\n", ret);
+	return ret;
+}
+
+static const struct rtl2830_platform_data rtl2830_mt2060_platform_data = {
+	.clk = 28800000,
+	.spec_inv = 1,
+	.vtop = 0x20,
+	.krf = 0x04,
+	.agc_targ_val = 0x2d,
+
+};
+
+static const struct rtl2830_platform_data rtl2830_qt1010_platform_data = {
+	.clk = 28800000,
+	.spec_inv = 1,
+	.vtop = 0x20,
+	.krf = 0x04,
+	.agc_targ_val = 0x2d,
+};
+
+static const struct rtl2830_platform_data rtl2830_mxl5005s_platform_data = {
+	.clk = 28800000,
+	.spec_inv = 0,
+	.vtop = 0x3f,
+	.krf = 0x04,
+	.agc_targ_val = 0x3e,
+};
+
+static int rtl2831u_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	struct dvb_usb_device *d = adap_to_d(adap);
+	struct rtl28xxu_dev *dev = d_to_priv(d);
+	struct rtl2830_platform_data *pdata = &dev->rtl2830_platform_data;
+	struct i2c_board_info board_info;
+	struct i2c_client *client;
+	int ret;
+
+	dev_dbg(&d->intf->dev, "\n");
+
+	switch (dev->tuner) {
+	case TUNER_RTL2830_QT1010:
+		*pdata = rtl2830_qt1010_platform_data;
+		break;
+	case TUNER_RTL2830_MT2060:
+		*pdata = rtl2830_mt2060_platform_data;
+		break;
+	case TUNER_RTL2830_MXL5005S:
+		*pdata = rtl2830_mxl5005s_platform_data;
+		break;
+	default:
+		dev_err(&d->intf->dev, "unknown tuner %s\n", dev->tuner_name);
+		ret = -ENODEV;
+		goto err;
+	}
+
+	/* attach demodulator */
+	memset(&board_info, 0, sizeof(board_info));
+	strlcpy(board_info.type, "rtl2830", I2C_NAME_SIZE);
+	board_info.addr = 0x10;
+	board_info.platform_data = pdata;
+	request_module("%s", board_info.type);
+	client = i2c_new_device(&d->i2c_adap, &board_info);
+	if (client == NULL || client->dev.driver == NULL) {
+		ret = -ENODEV;
+		goto err;
+	}
+
+	if (!try_module_get(client->dev.driver->owner)) {
+		i2c_unregister_device(client);
+		ret = -ENODEV;
+		goto err;
+	}
+
+	adap->fe[0] = pdata->get_dvb_frontend(client);
+	dev->demod_i2c_adapter = pdata->get_i2c_adapter(client);
+
+	dev->i2c_client_demod = client;
+
+	return 0;
+err:
+	dev_dbg(&d->intf->dev, "failed=%d\n", ret);
+	return ret;
+}
+
+static const struct rtl2832_platform_data rtl2832_fc0012_platform_data = {
+	.clk = 28800000,
+	.tuner = TUNER_RTL2832_FC0012
+};
+
+static const struct rtl2832_platform_data rtl2832_fc0013_platform_data = {
+	.clk = 28800000,
+	.tuner = TUNER_RTL2832_FC0013
+};
+
+static const struct rtl2832_platform_data rtl2832_tua9001_platform_data = {
+	.clk = 28800000,
+	.tuner = TUNER_RTL2832_TUA9001,
+};
+
+static const struct rtl2832_platform_data rtl2832_e4000_platform_data = {
+	.clk = 28800000,
+	.tuner = TUNER_RTL2832_E4000,
+};
+
+static const struct rtl2832_platform_data rtl2832_r820t_platform_data = {
+	.clk = 28800000,
+	.tuner = TUNER_RTL2832_R820T,
+};
+
+static int rtl2832u_fc0012_tuner_callback(struct dvb_usb_device *d,
+		int cmd, int arg)
+{
+	int ret;
+	u8 val;
+
+	dev_dbg(&d->intf->dev, "cmd=%d arg=%d\n", cmd, arg);
+
+	switch (cmd) {
+	case FC_FE_CALLBACK_VHF_ENABLE:
+		/* set output values */
+		ret = rtl28xxu_rd_reg(d, SYS_GPIO_OUT_VAL, &val);
+		if (ret)
+			goto err;
+
+		if (arg)
+			val &= 0xbf; /* set GPIO6 low */
+		else
+			val |= 0x40; /* set GPIO6 high */
+
+
+		ret = rtl28xxu_wr_reg(d, SYS_GPIO_OUT_VAL, val);
+		if (ret)
+			goto err;
+		break;
+	default:
+		ret = -EINVAL;
+		goto err;
+	}
+	return 0;
+err:
+	dev_dbg(&d->intf->dev, "failed=%d\n", ret);
+	return ret;
+}
+
+static int rtl2832u_tua9001_tuner_callback(struct dvb_usb_device *d,
+		int cmd, int arg)
+{
+	int ret;
+	u8 val;
+
+	dev_dbg(&d->intf->dev, "cmd=%d arg=%d\n", cmd, arg);
+
+	/*
+	 * CEN     always enabled by hardware wiring
+	 * RESETN  GPIO4
+	 * RXEN    GPIO1
+	 */
+
+	switch (cmd) {
+	case TUA9001_CMD_RESETN:
+		if (arg)
+			val = (1 << 4);
+		else
+			val = (0 << 4);
+
+		ret = rtl28xxu_wr_reg_mask(d, SYS_GPIO_OUT_VAL, val, 0x10);
+		if (ret)
+			goto err;
+		break;
+	case TUA9001_CMD_RXEN:
+		if (arg)
+			val = (1 << 1);
+		else
+			val = (0 << 1);
+
+		ret = rtl28xxu_wr_reg_mask(d, SYS_GPIO_OUT_VAL, val, 0x02);
+		if (ret)
+			goto err;
+		break;
+	}
+
+	return 0;
+err:
+	dev_dbg(&d->intf->dev, "failed=%d\n", ret);
+	return ret;
+}
+
+static int rtl2832u_frontend_callback(void *adapter_priv, int component,
+		int cmd, int arg)
+{
+	struct i2c_adapter *adapter = adapter_priv;
+	struct device *parent = adapter->dev.parent;
+	struct i2c_adapter *parent_adapter;
+	struct dvb_usb_device *d;
+	struct rtl28xxu_dev *dev;
+
+	/*
+	 * All tuners are connected to demod muxed I2C adapter. We have to
+	 * resolve its parent adapter in order to get handle for this driver
+	 * private data. That is a bit hackish solution, GPIO or direct driver
+	 * callback would be better...
+	 */
+	if (parent != NULL && parent->type == &i2c_adapter_type)
+		parent_adapter = to_i2c_adapter(parent);
+	else
+		return -EINVAL;
+
+	d = i2c_get_adapdata(parent_adapter);
+	dev = d->priv;
+
+	dev_dbg(&d->intf->dev, "component=%d cmd=%d arg=%d\n",
+		component, cmd, arg);
+
+	switch (component) {
+	case DVB_FRONTEND_COMPONENT_TUNER:
+		switch (dev->tuner) {
+		case TUNER_RTL2832_FC0012:
+			return rtl2832u_fc0012_tuner_callback(d, cmd, arg);
+		case TUNER_RTL2832_TUA9001:
+			return rtl2832u_tua9001_tuner_callback(d, cmd, arg);
+		}
+	}
+
+	return 0;
+}
+
+static int rtl2832u_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	struct dvb_usb_device *d = adap_to_d(adap);
+	struct rtl28xxu_dev *dev = d_to_priv(d);
+	struct rtl2832_platform_data *pdata = &dev->rtl2832_platform_data;
+	struct i2c_board_info board_info;
+	struct i2c_client *client;
+	int ret;
+
+	dev_dbg(&d->intf->dev, "\n");
+
+	switch (dev->tuner) {
+	case TUNER_RTL2832_FC0012:
+		*pdata = rtl2832_fc0012_platform_data;
+		break;
+	case TUNER_RTL2832_FC0013:
+		*pdata = rtl2832_fc0013_platform_data;
+		break;
+	case TUNER_RTL2832_FC2580:
+		/* FIXME: do not abuse fc0012 settings */
+		*pdata = rtl2832_fc0012_platform_data;
+		break;
+	case TUNER_RTL2832_TUA9001:
+		*pdata = rtl2832_tua9001_platform_data;
+		break;
+	case TUNER_RTL2832_E4000:
+		*pdata = rtl2832_e4000_platform_data;
+		break;
+	case TUNER_RTL2832_R820T:
+	case TUNER_RTL2832_R828D:
+		*pdata = rtl2832_r820t_platform_data;
+		break;
+	default:
+		dev_err(&d->intf->dev, "unknown tuner %s\n", dev->tuner_name);
+		ret = -ENODEV;
+		goto err;
+	}
+
+	/* attach demodulator */
+	memset(&board_info, 0, sizeof(board_info));
+	strlcpy(board_info.type, "rtl2832", I2C_NAME_SIZE);
+	board_info.addr = 0x10;
+	board_info.platform_data = pdata;
+	request_module("%s", board_info.type);
+	client = i2c_new_device(&d->i2c_adap, &board_info);
+	if (client == NULL || client->dev.driver == NULL) {
+		ret = -ENODEV;
+		goto err;
+	}
+
+	if (!try_module_get(client->dev.driver->owner)) {
+		i2c_unregister_device(client);
+		ret = -ENODEV;
+		goto err;
+	}
+
+	adap->fe[0] = pdata->get_dvb_frontend(client);
+	dev->demod_i2c_adapter = pdata->get_i2c_adapter(client);
+
+	dev->i2c_client_demod = client;
+
+	/* set fe callback */
+	adap->fe[0]->callback = rtl2832u_frontend_callback;
+
+	if (dev->slave_demod) {
+		struct i2c_board_info info = {};
+
+		/*
+		 * We continue on reduced mode, without DVB-T2/C, using master
+		 * demod, when slave demod fails.
+		 */
+		ret = 0;
+
+		/* attach slave demodulator */
+		if (dev->slave_demod == SLAVE_DEMOD_MN88472) {
+			struct mn88472_config mn88472_config = {};
+
+			mn88472_config.fe = &adap->fe[1];
+			mn88472_config.i2c_wr_max = 22,
+			strlcpy(info.type, "mn88472", I2C_NAME_SIZE);
+			mn88472_config.xtal = 20500000;
+			mn88472_config.ts_mode = SERIAL_TS_MODE;
+			mn88472_config.ts_clock = VARIABLE_TS_CLOCK;
+			info.addr = 0x18;
+			info.platform_data = &mn88472_config;
+			request_module(info.type);
+			client = i2c_new_device(&d->i2c_adap, &info);
+			if (client == NULL || client->dev.driver == NULL) {
+				dev->slave_demod = SLAVE_DEMOD_NONE;
+				goto err_slave_demod_failed;
+			}
+
+			if (!try_module_get(client->dev.driver->owner)) {
+				i2c_unregister_device(client);
+				dev->slave_demod = SLAVE_DEMOD_NONE;
+				goto err_slave_demod_failed;
+			}
+
+			dev->i2c_client_slave_demod = client;
+		} else {
+			struct mn88473_config mn88473_config = {};
+
+			mn88473_config.fe = &adap->fe[1];
+			mn88473_config.i2c_wr_max = 22,
+			strlcpy(info.type, "mn88473", I2C_NAME_SIZE);
+			info.addr = 0x18;
+			info.platform_data = &mn88473_config;
+			request_module(info.type);
+			client = i2c_new_device(&d->i2c_adap, &info);
+			if (client == NULL || client->dev.driver == NULL) {
+				dev->slave_demod = SLAVE_DEMOD_NONE;
+				goto err_slave_demod_failed;
+			}
+
+			if (!try_module_get(client->dev.driver->owner)) {
+				i2c_unregister_device(client);
+				dev->slave_demod = SLAVE_DEMOD_NONE;
+				goto err_slave_demod_failed;
+			}
+
+			dev->i2c_client_slave_demod = client;
+		}
+	}
+
+	return 0;
+err_slave_demod_failed:
+err:
+	dev_dbg(&d->intf->dev, "failed=%d\n", ret);
+	return ret;
+}
+
+static int rtl28xxu_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	struct rtl28xxu_dev *dev = adap_to_priv(adap);
+
+	if (dev->chip_id == CHIP_ID_RTL2831U)
+		return rtl2831u_frontend_attach(adap);
+	else
+		return rtl2832u_frontend_attach(adap);
+}
+
+static int rtl28xxu_frontend_detach(struct dvb_usb_adapter *adap)
+{
+	struct dvb_usb_device *d = adap_to_d(adap);
+	struct rtl28xxu_dev *dev = d_to_priv(d);
+	struct i2c_client *client;
+
+	dev_dbg(&d->intf->dev, "\n");
+
+	/* remove I2C slave demod */
+	client = dev->i2c_client_slave_demod;
+	if (client) {
+		module_put(client->dev.driver->owner);
+		i2c_unregister_device(client);
+	}
+
+	/* remove I2C demod */
+	client = dev->i2c_client_demod;
+	if (client) {
+		module_put(client->dev.driver->owner);
+		i2c_unregister_device(client);
+	}
+
+	return 0;
+}
+
+static struct qt1010_config rtl28xxu_qt1010_config = {
+	.i2c_address = 0x62, /* 0xc4 */
+};
+
+static struct mt2060_config rtl28xxu_mt2060_config = {
+	.i2c_address = 0x60, /* 0xc0 */
+	.clock_out = 0,
+};
+
+static struct mxl5005s_config rtl28xxu_mxl5005s_config = {
+	.i2c_address     = 0x63, /* 0xc6 */
+	.if_freq         = IF_FREQ_4570000HZ,
+	.xtal_freq       = CRYSTAL_FREQ_16000000HZ,
+	.agc_mode        = MXL_SINGLE_AGC,
+	.tracking_filter = MXL_TF_C_H,
+	.rssi_enable     = MXL_RSSI_ENABLE,
+	.cap_select      = MXL_CAP_SEL_ENABLE,
+	.div_out         = MXL_DIV_OUT_4,
+	.clock_out       = MXL_CLOCK_OUT_DISABLE,
+	.output_load     = MXL5005S_IF_OUTPUT_LOAD_200_OHM,
+	.top		 = MXL5005S_TOP_25P2,
+	.mod_mode        = MXL_DIGITAL_MODE,
+	.if_mode         = MXL_ZERO_IF,
+	.AgcMasterByte   = 0x00,
+};
+
+static int rtl2831u_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	int ret;
+	struct dvb_usb_device *d = adap_to_d(adap);
+	struct rtl28xxu_dev *dev = d_to_priv(d);
+	struct dvb_frontend *fe;
+
+	dev_dbg(&d->intf->dev, "\n");
+
+	switch (dev->tuner) {
+	case TUNER_RTL2830_QT1010:
+		fe = dvb_attach(qt1010_attach, adap->fe[0],
+				dev->demod_i2c_adapter,
+				&rtl28xxu_qt1010_config);
+		break;
+	case TUNER_RTL2830_MT2060:
+		fe = dvb_attach(mt2060_attach, adap->fe[0],
+				dev->demod_i2c_adapter,
+				&rtl28xxu_mt2060_config, 1220);
+		break;
+	case TUNER_RTL2830_MXL5005S:
+		fe = dvb_attach(mxl5005s_attach, adap->fe[0],
+				dev->demod_i2c_adapter,
+				&rtl28xxu_mxl5005s_config);
+		break;
+	default:
+		fe = NULL;
+		dev_err(&d->intf->dev, "unknown tuner %d\n", dev->tuner);
+	}
+
+	if (fe == NULL) {
+		ret = -ENODEV;
+		goto err;
+	}
+
+	return 0;
+err:
+	dev_dbg(&d->intf->dev, "failed=%d\n", ret);
+	return ret;
+}
+
+static const struct fc2580_config rtl2832u_fc2580_config = {
+	.i2c_addr = 0x56,
+	.clock = 16384000,
+};
+
+static struct tua9001_config rtl2832u_tua9001_config = {
+	.i2c_addr = 0x60,
+};
+
+static const struct fc0012_config rtl2832u_fc0012_config = {
+	.i2c_address = 0x63, /* 0xc6 >> 1 */
+	.xtal_freq = FC_XTAL_28_8_MHZ,
+};
+
+static const struct r820t_config rtl2832u_r820t_config = {
+	.i2c_addr = 0x1a,
+	.xtal = 28800000,
+	.max_i2c_msg_len = 2,
+	.rafael_chip = CHIP_R820T,
+};
+
+static const struct r820t_config rtl2832u_r828d_config = {
+	.i2c_addr = 0x3a,
+	.xtal = 16000000,
+	.max_i2c_msg_len = 2,
+	.rafael_chip = CHIP_R828D,
+};
+
+static int rtl2832u_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	int ret;
+	struct dvb_usb_device *d = adap_to_d(adap);
+	struct rtl28xxu_dev *dev = d_to_priv(d);
+	struct dvb_frontend *fe = NULL;
+	struct i2c_board_info info;
+	struct i2c_client *client;
+	struct v4l2_subdev *subdev = NULL;
+	struct platform_device *pdev;
+	struct rtl2832_sdr_platform_data pdata;
+
+	dev_dbg(&d->intf->dev, "\n");
+
+	memset(&info, 0, sizeof(struct i2c_board_info));
+	memset(&pdata, 0, sizeof(pdata));
+
+	switch (dev->tuner) {
+	case TUNER_RTL2832_FC0012:
+		fe = dvb_attach(fc0012_attach, adap->fe[0],
+			dev->demod_i2c_adapter, &rtl2832u_fc0012_config);
+
+		/* since fc0012 includs reading the signal strength delegate
+		 * that to the tuner driver */
+		adap->fe[0]->ops.read_signal_strength =
+				adap->fe[0]->ops.tuner_ops.get_rf_strength;
+		break;
+	case TUNER_RTL2832_FC0013:
+		fe = dvb_attach(fc0013_attach, adap->fe[0],
+			dev->demod_i2c_adapter, 0xc6>>1, 0, FC_XTAL_28_8_MHZ);
+
+		/* fc0013 also supports signal strength reading */
+		adap->fe[0]->ops.read_signal_strength =
+				adap->fe[0]->ops.tuner_ops.get_rf_strength;
+		break;
+	case TUNER_RTL2832_E4000: {
+			struct e4000_config e4000_config = {
+				.fe = adap->fe[0],
+				.clock = 28800000,
+			};
+
+			strlcpy(info.type, "e4000", I2C_NAME_SIZE);
+			info.addr = 0x64;
+			info.platform_data = &e4000_config;
+
+			request_module(info.type);
+			client = i2c_new_device(dev->demod_i2c_adapter, &info);
+			if (client == NULL || client->dev.driver == NULL)
+				break;
+
+			if (!try_module_get(client->dev.driver->owner)) {
+				i2c_unregister_device(client);
+				break;
+			}
+
+			dev->i2c_client_tuner = client;
+			subdev = i2c_get_clientdata(client);
+		}
+		break;
+	case TUNER_RTL2832_FC2580:
+		fe = dvb_attach(fc2580_attach, adap->fe[0],
+				dev->demod_i2c_adapter,
+				&rtl2832u_fc2580_config);
+		break;
+	case TUNER_RTL2832_TUA9001:
+		/* enable GPIO1 and GPIO4 as output */
+		ret = rtl28xxu_wr_reg_mask(d, SYS_GPIO_DIR, 0x00, 0x12);
+		if (ret)
+			goto err;
+
+		ret = rtl28xxu_wr_reg_mask(d, SYS_GPIO_OUT_EN, 0x12, 0x12);
+		if (ret)
+			goto err;
+
+		fe = dvb_attach(tua9001_attach, adap->fe[0],
+				dev->demod_i2c_adapter,
+				&rtl2832u_tua9001_config);
+		break;
+	case TUNER_RTL2832_R820T:
+		fe = dvb_attach(r820t_attach, adap->fe[0],
+				dev->demod_i2c_adapter,
+				&rtl2832u_r820t_config);
+
+		/* Use tuner to get the signal strength */
+		adap->fe[0]->ops.read_signal_strength =
+				adap->fe[0]->ops.tuner_ops.get_rf_strength;
+		break;
+	case TUNER_RTL2832_R828D:
+		fe = dvb_attach(r820t_attach, adap->fe[0],
+				dev->demod_i2c_adapter,
+				&rtl2832u_r828d_config);
+		adap->fe[0]->ops.read_signal_strength =
+				adap->fe[0]->ops.tuner_ops.get_rf_strength;
+
+		if (adap->fe[1]) {
+			fe = dvb_attach(r820t_attach, adap->fe[1],
+					dev->demod_i2c_adapter,
+					&rtl2832u_r828d_config);
+			adap->fe[1]->ops.read_signal_strength =
+					adap->fe[1]->ops.tuner_ops.get_rf_strength;
+		}
+		break;
+	default:
+		dev_err(&d->intf->dev, "unknown tuner %d\n", dev->tuner);
+	}
+	if (fe == NULL && dev->i2c_client_tuner == NULL) {
+		ret = -ENODEV;
+		goto err;
+	}
+
+	/* register SDR */
+	switch (dev->tuner) {
+	case TUNER_RTL2832_FC0012:
+	case TUNER_RTL2832_FC0013:
+	case TUNER_RTL2832_E4000:
+	case TUNER_RTL2832_R820T:
+	case TUNER_RTL2832_R828D:
+		pdata.clk = dev->rtl2832_platform_data.clk;
+		pdata.tuner = dev->tuner;
+		pdata.i2c_client = dev->i2c_client_demod;
+		pdata.bulk_read = dev->rtl2832_platform_data.bulk_read;
+		pdata.bulk_write = dev->rtl2832_platform_data.bulk_write;
+		pdata.update_bits = dev->rtl2832_platform_data.update_bits;
+		pdata.dvb_frontend = adap->fe[0];
+		pdata.dvb_usb_device = d;
+		pdata.v4l2_subdev = subdev;
+
+		request_module("%s", "rtl2832_sdr");
+		pdev = platform_device_register_data(&d->intf->dev,
+						     "rtl2832_sdr",
+						     PLATFORM_DEVID_AUTO,
+						     &pdata, sizeof(pdata));
+		if (pdev == NULL || pdev->dev.driver == NULL)
+			break;
+		dev->platform_device_sdr = pdev;
+		break;
+	default:
+		dev_dbg(&d->intf->dev, "no SDR for tuner=%d\n", dev->tuner);
+	}
+
+	return 0;
+err:
+	dev_dbg(&d->intf->dev, "failed=%d\n", ret);
+	return ret;
+}
+
+static int rtl28xxu_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	struct rtl28xxu_dev *dev = adap_to_priv(adap);
+
+	if (dev->chip_id == CHIP_ID_RTL2831U)
+		return rtl2831u_tuner_attach(adap);
+	else
+		return rtl2832u_tuner_attach(adap);
+}
+
+static int rtl28xxu_tuner_detach(struct dvb_usb_adapter *adap)
+{
+	struct dvb_usb_device *d = adap_to_d(adap);
+	struct rtl28xxu_dev *dev = d_to_priv(d);
+	struct i2c_client *client;
+	struct platform_device *pdev;
+
+	dev_dbg(&d->intf->dev, "\n");
+
+	/* remove platform SDR */
+	pdev = dev->platform_device_sdr;
+	if (pdev)
+		platform_device_unregister(pdev);
+
+	/* remove I2C tuner */
+	client = dev->i2c_client_tuner;
+	if (client) {
+		module_put(client->dev.driver->owner);
+		i2c_unregister_device(client);
+	}
+
+	return 0;
+}
+
+static int rtl28xxu_init(struct dvb_usb_device *d)
+{
+	int ret;
+	u8 val;
+
+	dev_dbg(&d->intf->dev, "\n");
+
+	/* init USB endpoints */
+	ret = rtl28xxu_rd_reg(d, USB_SYSCTL_0, &val);
+	if (ret)
+		goto err;
+
+	/* enable DMA and Full Packet Mode*/
+	val |= 0x09;
+	ret = rtl28xxu_wr_reg(d, USB_SYSCTL_0, val);
+	if (ret)
+		goto err;
+
+	/* set EPA maximum packet size to 0x0200 */
+	ret = rtl28xxu_wr_regs(d, USB_EPA_MAXPKT, "\x00\x02\x00\x00", 4);
+	if (ret)
+		goto err;
+
+	/* change EPA FIFO length */
+	ret = rtl28xxu_wr_regs(d, USB_EPA_FIFO_CFG, "\x14\x00\x00\x00", 4);
+	if (ret)
+		goto err;
+
+	return ret;
+err:
+	dev_dbg(&d->intf->dev, "failed=%d\n", ret);
+	return ret;
+}
+
+static int rtl2831u_power_ctrl(struct dvb_usb_device *d, int onoff)
+{
+	int ret;
+	u8 gpio, sys0, epa_ctl[2];
+
+	dev_dbg(&d->intf->dev, "onoff=%d\n", onoff);
+
+	/* demod adc */
+	ret = rtl28xxu_rd_reg(d, SYS_SYS0, &sys0);
+	if (ret)
+		goto err;
+
+	/* tuner power, read GPIOs */
+	ret = rtl28xxu_rd_reg(d, SYS_GPIO_OUT_VAL, &gpio);
+	if (ret)
+		goto err;
+
+	dev_dbg(&d->intf->dev, "RD SYS0=%02x GPIO_OUT_VAL=%02x\n", sys0, gpio);
+
+	if (onoff) {
+		gpio |= 0x01; /* GPIO0 = 1 */
+		gpio &= (~0x10); /* GPIO4 = 0 */
+		gpio |= 0x04; /* GPIO2 = 1, LED on */
+		sys0 = sys0 & 0x0f;
+		sys0 |= 0xe0;
+		epa_ctl[0] = 0x00; /* clear stall */
+		epa_ctl[1] = 0x00; /* clear reset */
+	} else {
+		gpio &= (~0x01); /* GPIO0 = 0 */
+		gpio |= 0x10; /* GPIO4 = 1 */
+		gpio &= (~0x04); /* GPIO2 = 1, LED off */
+		sys0 = sys0 & (~0xc0);
+		epa_ctl[0] = 0x10; /* set stall */
+		epa_ctl[1] = 0x02; /* set reset */
+	}
+
+	dev_dbg(&d->intf->dev, "WR SYS0=%02x GPIO_OUT_VAL=%02x\n", sys0, gpio);
+
+	/* demod adc */
+	ret = rtl28xxu_wr_reg(d, SYS_SYS0, sys0);
+	if (ret)
+		goto err;
+
+	/* tuner power, write GPIOs */
+	ret = rtl28xxu_wr_reg(d, SYS_GPIO_OUT_VAL, gpio);
+	if (ret)
+		goto err;
+
+	/* streaming EP: stall & reset */
+	ret = rtl28xxu_wr_regs(d, USB_EPA_CTL, epa_ctl, 2);
+	if (ret)
+		goto err;
+
+	if (onoff)
+		usb_clear_halt(d->udev, usb_rcvbulkpipe(d->udev, 0x81));
+
+	return ret;
+err:
+	dev_dbg(&d->intf->dev, "failed=%d\n", ret);
+	return ret;
+}
+
+static int rtl2832u_power_ctrl(struct dvb_usb_device *d, int onoff)
+{
+	int ret;
+
+	dev_dbg(&d->intf->dev, "onoff=%d\n", onoff);
+
+	if (onoff) {
+		/* GPIO3=1, GPIO4=0 */
+		ret = rtl28xxu_wr_reg_mask(d, SYS_GPIO_OUT_VAL, 0x08, 0x18);
+		if (ret)
+			goto err;
+
+		/* suspend? */
+		ret = rtl28xxu_wr_reg_mask(d, SYS_DEMOD_CTL1, 0x00, 0x10);
+		if (ret)
+			goto err;
+
+		/* enable PLL */
+		ret = rtl28xxu_wr_reg_mask(d, SYS_DEMOD_CTL, 0x80, 0x80);
+		if (ret)
+			goto err;
+
+		/* disable reset */
+		ret = rtl28xxu_wr_reg_mask(d, SYS_DEMOD_CTL, 0x20, 0x20);
+		if (ret)
+			goto err;
+
+		/* streaming EP: clear stall & reset */
+		ret = rtl28xxu_wr_regs(d, USB_EPA_CTL, "\x00\x00", 2);
+		if (ret)
+			goto err;
+
+		ret = usb_clear_halt(d->udev, usb_rcvbulkpipe(d->udev, 0x81));
+		if (ret)
+			goto err;
+	} else {
+		/* GPIO4=1 */
+		ret = rtl28xxu_wr_reg_mask(d, SYS_GPIO_OUT_VAL, 0x10, 0x10);
+		if (ret)
+			goto err;
+
+		/* disable PLL */
+		ret = rtl28xxu_wr_reg_mask(d, SYS_DEMOD_CTL, 0x00, 0x80);
+		if (ret)
+			goto err;
+
+		/* streaming EP: set stall & reset */
+		ret = rtl28xxu_wr_regs(d, USB_EPA_CTL, "\x10\x02", 2);
+		if (ret)
+			goto err;
+	}
+
+	return ret;
+err:
+	dev_dbg(&d->intf->dev, "failed=%d\n", ret);
+	return ret;
+}
+
+static int rtl28xxu_power_ctrl(struct dvb_usb_device *d, int onoff)
+{
+	struct rtl28xxu_dev *dev = d_to_priv(d);
+
+	if (dev->chip_id == CHIP_ID_RTL2831U)
+		return rtl2831u_power_ctrl(d, onoff);
+	else
+		return rtl2832u_power_ctrl(d, onoff);
+}
+
+static int rtl28xxu_frontend_ctrl(struct dvb_frontend *fe, int onoff)
+{
+	struct dvb_usb_device *d = fe_to_d(fe);
+	struct rtl28xxu_dev *dev = fe_to_priv(fe);
+	struct rtl2832_platform_data *pdata = &dev->rtl2832_platform_data;
+	int ret;
+	u8 val;
+
+	dev_dbg(&d->intf->dev, "fe=%d onoff=%d\n", fe->id, onoff);
+
+	if (dev->chip_id == CHIP_ID_RTL2831U)
+		return 0;
+
+	/* control internal demod ADC */
+	if (fe->id == 0 && onoff)
+		val = 0x48; /* enable ADC */
+	else
+		val = 0x00; /* disable ADC */
+
+	ret = rtl28xxu_wr_reg_mask(d, SYS_DEMOD_CTL, val, 0x48);
+	if (ret)
+		goto err;
+
+	/* bypass slave demod TS through master demod */
+	if (fe->id == 1 && onoff) {
+		ret = pdata->enable_slave_ts(dev->i2c_client_demod);
+		if (ret)
+			goto err;
+	}
+
+	return 0;
+err:
+	dev_dbg(&d->intf->dev, "failed=%d\n", ret);
+	return ret;
+}
+
+#if IS_ENABLED(CONFIG_RC_CORE)
+static int rtl2831u_rc_query(struct dvb_usb_device *d)
+{
+	int ret, i;
+	struct rtl28xxu_dev *dev = d->priv;
+	u8 buf[5];
+	u32 rc_code;
+	struct rtl28xxu_reg_val rc_nec_tab[] = {
+		{ 0x3033, 0x80 },
+		{ 0x3020, 0x43 },
+		{ 0x3021, 0x16 },
+		{ 0x3022, 0x16 },
+		{ 0x3023, 0x5a },
+		{ 0x3024, 0x2d },
+		{ 0x3025, 0x16 },
+		{ 0x3026, 0x01 },
+		{ 0x3028, 0xb0 },
+		{ 0x3029, 0x04 },
+		{ 0x302c, 0x88 },
+		{ 0x302e, 0x13 },
+		{ 0x3030, 0xdf },
+		{ 0x3031, 0x05 },
+	};
+
+	/* init remote controller */
+	if (!dev->rc_active) {
+		for (i = 0; i < ARRAY_SIZE(rc_nec_tab); i++) {
+			ret = rtl28xxu_wr_reg(d, rc_nec_tab[i].reg,
+					rc_nec_tab[i].val);
+			if (ret)
+				goto err;
+		}
+		dev->rc_active = true;
+	}
+
+	ret = rtl28xxu_rd_regs(d, SYS_IRRC_RP, buf, 5);
+	if (ret)
+		goto err;
+
+	if (buf[4] & 0x01) {
+		if (buf[2] == (u8) ~buf[3]) {
+			if (buf[0] == (u8) ~buf[1]) {
+				/* NEC standard (16 bit) */
+				rc_code = RC_SCANCODE_NEC(buf[0], buf[2]);
+			} else {
+				/* NEC extended (24 bit) */
+				rc_code = RC_SCANCODE_NECX(buf[0] << 8 | buf[1],
+							   buf[2]);
+			}
+		} else {
+			/* NEC full (32 bit) */
+			rc_code = RC_SCANCODE_NEC32(buf[0] << 24 | buf[1] << 16 |
+						    buf[2] << 8  | buf[3]);
+		}
+
+		rc_keydown(d->rc_dev, RC_TYPE_NEC, rc_code, 0);
+
+		ret = rtl28xxu_wr_reg(d, SYS_IRRC_SR, 1);
+		if (ret)
+			goto err;
+
+		/* repeated intentionally to avoid extra keypress */
+		ret = rtl28xxu_wr_reg(d, SYS_IRRC_SR, 1);
+		if (ret)
+			goto err;
+	}
+
+	return ret;
+err:
+	dev_dbg(&d->intf->dev, "failed=%d\n", ret);
+	return ret;
+}
+
+static int rtl2831u_get_rc_config(struct dvb_usb_device *d,
+		struct dvb_usb_rc *rc)
+{
+	rc->map_name = RC_MAP_EMPTY;
+	rc->allowed_protos = RC_BIT_NEC;
+	rc->query = rtl2831u_rc_query;
+	rc->interval = 400;
+
+	return 0;
+}
+
+static int rtl2832u_rc_query(struct dvb_usb_device *d)
+{
+	int ret, i, len;
+	struct rtl28xxu_dev *dev = d->priv;
+	struct ir_raw_event ev;
+	u8 buf[128];
+	static const struct rtl28xxu_reg_val_mask refresh_tab[] = {
+		{IR_RX_IF,               0x03, 0xff},
+		{IR_RX_BUF_CTRL,         0x80, 0xff},
+		{IR_RX_CTRL,             0x80, 0xff},
+	};
+
+	/* init remote controller */
+	if (!dev->rc_active) {
+		static const struct rtl28xxu_reg_val_mask init_tab[] = {
+			{SYS_DEMOD_CTL1,         0x00, 0x04},
+			{SYS_DEMOD_CTL1,         0x00, 0x08},
+			{USB_CTRL,               0x20, 0x20},
+			{SYS_GPIO_DIR,           0x00, 0x08},
+			{SYS_GPIO_OUT_EN,        0x08, 0x08},
+			{SYS_GPIO_OUT_VAL,       0x08, 0x08},
+			{IR_MAX_DURATION0,       0xd0, 0xff},
+			{IR_MAX_DURATION1,       0x07, 0xff},
+			{IR_IDLE_LEN0,           0xc0, 0xff},
+			{IR_IDLE_LEN1,           0x00, 0xff},
+			{IR_GLITCH_LEN,          0x03, 0xff},
+			{IR_RX_CLK,              0x09, 0xff},
+			{IR_RX_CFG,              0x1c, 0xff},
+			{IR_MAX_H_TOL_LEN,       0x1e, 0xff},
+			{IR_MAX_L_TOL_LEN,       0x1e, 0xff},
+			{IR_RX_CTRL,             0x80, 0xff},
+		};
+
+		for (i = 0; i < ARRAY_SIZE(init_tab); i++) {
+			ret = rtl28xxu_wr_reg_mask(d, init_tab[i].reg,
+					init_tab[i].val, init_tab[i].mask);
+			if (ret)
+				goto err;
+		}
+
+		dev->rc_active = true;
+	}
+
+	ret = rtl28xxu_rd_reg(d, IR_RX_IF, &buf[0]);
+	if (ret)
+		goto err;
+
+	if (buf[0] != 0x83)
+		goto exit;
+
+	ret = rtl28xxu_rd_reg(d, IR_RX_BC, &buf[0]);
+	if (ret)
+		goto err;
+
+	len = buf[0];
+
+	/* read raw code from hw */
+	ret = rtl28xxu_rd_regs(d, IR_RX_BUF, buf, len);
+	if (ret)
+		goto err;
+
+	/* let hw receive new code */
+	for (i = 0; i < ARRAY_SIZE(refresh_tab); i++) {
+		ret = rtl28xxu_wr_reg_mask(d, refresh_tab[i].reg,
+				refresh_tab[i].val, refresh_tab[i].mask);
+		if (ret)
+			goto err;
+	}
+
+	/* pass data to Kernel IR decoder */
+	init_ir_raw_event(&ev);
+
+	for (i = 0; i < len; i++) {
+		ev.pulse = buf[i] >> 7;
+		ev.duration = 50800 * (buf[i] & 0x7f);
+		ir_raw_event_store_with_filter(d->rc_dev, &ev);
+	}
+
+	/* 'flush' ir_raw_event_store_with_filter() */
+	ir_raw_event_set_idle(d->rc_dev, true);
+	ir_raw_event_handle(d->rc_dev);
+exit:
+	return ret;
+err:
+	dev_dbg(&d->intf->dev, "failed=%d\n", ret);
+	return ret;
+}
+
+static int rtl2832u_get_rc_config(struct dvb_usb_device *d,
+		struct dvb_usb_rc *rc)
+{
+	/* disable IR interrupts in order to avoid SDR sample loss */
+	if (rtl28xxu_disable_rc)
+		return rtl28xxu_wr_reg(d, IR_RX_IE, 0x00);
+
+	/* load empty to enable rc */
+	if (!rc->map_name)
+		rc->map_name = RC_MAP_EMPTY;
+	rc->allowed_protos = RC_BIT_ALL;
+	rc->driver_type = RC_DRIVER_IR_RAW;
+	rc->query = rtl2832u_rc_query;
+	rc->interval = 200;
+
+	return 0;
+}
+
+static int rtl28xxu_get_rc_config(struct dvb_usb_device *d,
+		struct dvb_usb_rc *rc)
+{
+	struct rtl28xxu_dev *dev = d_to_priv(d);
+
+	if (dev->chip_id == CHIP_ID_RTL2831U)
+		return rtl2831u_get_rc_config(d, rc);
+	else
+		return rtl2832u_get_rc_config(d, rc);
+}
+#else
+#define rtl28xxu_get_rc_config NULL
+#endif
+
+static int rtl28xxu_pid_filter_ctrl(struct dvb_usb_adapter *adap, int onoff)
+{
+	struct rtl28xxu_dev *dev = adap_to_priv(adap);
+
+	if (dev->chip_id == CHIP_ID_RTL2831U) {
+		struct rtl2830_platform_data *pdata = &dev->rtl2830_platform_data;
+
+		return pdata->pid_filter_ctrl(adap->fe[0], onoff);
+	} else {
+		struct rtl2832_platform_data *pdata = &dev->rtl2832_platform_data;
+
+		return pdata->pid_filter_ctrl(adap->fe[0], onoff);
+	}
+}
+
+static int rtl28xxu_pid_filter(struct dvb_usb_adapter *adap, int index,
+			       u16 pid, int onoff)
+{
+	struct rtl28xxu_dev *dev = adap_to_priv(adap);
+
+	if (dev->chip_id == CHIP_ID_RTL2831U) {
+		struct rtl2830_platform_data *pdata = &dev->rtl2830_platform_data;
+
+		return pdata->pid_filter(adap->fe[0], index, pid, onoff);
+	} else {
+		struct rtl2832_platform_data *pdata = &dev->rtl2832_platform_data;
+
+		return pdata->pid_filter(adap->fe[0], index, pid, onoff);
+	}
+}
+
+static const struct dvb_usb_device_properties rtl28xxu_props = {
+	.driver_name = KBUILD_MODNAME,
+	.owner = THIS_MODULE,
+	.adapter_nr = adapter_nr,
+	.size_of_priv = sizeof(struct rtl28xxu_dev),
+
+	.identify_state = rtl28xxu_identify_state,
+	.power_ctrl = rtl28xxu_power_ctrl,
+	.frontend_ctrl = rtl28xxu_frontend_ctrl,
+	.i2c_algo = &rtl28xxu_i2c_algo,
+	.read_config = rtl28xxu_read_config,
+	.frontend_attach = rtl28xxu_frontend_attach,
+	.frontend_detach = rtl28xxu_frontend_detach,
+	.tuner_attach = rtl28xxu_tuner_attach,
+	.tuner_detach = rtl28xxu_tuner_detach,
+	.init = rtl28xxu_init,
+	.get_rc_config = rtl28xxu_get_rc_config,
+
+	.num_adapters = 1,
+	.adapter = {
+		{
+			.caps = DVB_USB_ADAP_HAS_PID_FILTER |
+				DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+
+			.pid_filter_count = 32,
+			.pid_filter_ctrl = rtl28xxu_pid_filter_ctrl,
+			.pid_filter = rtl28xxu_pid_filter,
+
+			.stream = DVB_USB_STREAM_BULK(0x81, 6, 8 * 512),
+		},
+	},
+};
+
+static const struct usb_device_id rtl28xxu_id_table[] = {
+	/* RTL2831U devices: */
+	{ DVB_USB_DEVICE(USB_VID_REALTEK, USB_PID_REALTEK_RTL2831U,
+		&rtl28xxu_props, "Realtek RTL2831U reference design", NULL) },
+	{ DVB_USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_FREECOM_DVBT,
+		&rtl28xxu_props, "Freecom USB2.0 DVB-T", NULL) },
+	{ DVB_USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_FREECOM_DVBT_2,
+		&rtl28xxu_props, "Freecom USB2.0 DVB-T", NULL) },
+
+	/* RTL2832U devices: */
+	{ DVB_USB_DEVICE(USB_VID_REALTEK, 0x2832,
+		&rtl28xxu_props, "Realtek RTL2832U reference design", NULL) },
+	{ DVB_USB_DEVICE(USB_VID_REALTEK, 0x2838,
+		&rtl28xxu_props, "Realtek RTL2832U reference design", NULL) },
+	{ DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_STICK_BLACK_REV1,
+		&rtl28xxu_props, "TerraTec Cinergy T Stick Black", RC_MAP_TERRATEC_SLIM) },
+	{ DVB_USB_DEVICE(USB_VID_GTEK, USB_PID_DELOCK_USB2_DVBT,
+		&rtl28xxu_props, "G-Tek Electronics Group Lifeview LV5TDLX DVB-T", NULL) },
+	{ DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_NOXON_DAB_STICK,
+		&rtl28xxu_props, "TerraTec NOXON DAB Stick", NULL) },
+	{ DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_NOXON_DAB_STICK_REV2,
+		&rtl28xxu_props, "TerraTec NOXON DAB Stick (rev 2)", NULL) },
+	{ DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_NOXON_DAB_STICK_REV3,
+		&rtl28xxu_props, "TerraTec NOXON DAB Stick (rev 3)", NULL) },
+	{ DVB_USB_DEVICE(USB_VID_GTEK, USB_PID_TREKSTOR_TERRES_2_0,
+		&rtl28xxu_props, "Trekstor DVB-T Stick Terres 2.0", NULL) },
+	{ DVB_USB_DEVICE(USB_VID_DEXATEK, 0x1101,
+		&rtl28xxu_props, "Dexatek DK DVB-T Dongle", NULL) },
+	{ DVB_USB_DEVICE(USB_VID_LEADTEK, 0x6680,
+		&rtl28xxu_props, "DigitalNow Quad DVB-T Receiver", NULL) },
+	{ DVB_USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_MINID,
+		&rtl28xxu_props, "Leadtek Winfast DTV Dongle Mini D", NULL) },
+	{ DVB_USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV2000DS_PLUS,
+		&rtl28xxu_props, "Leadtek WinFast DTV2000DS Plus", RC_MAP_LEADTEK_Y04G0051) },
+	{ DVB_USB_DEVICE(USB_VID_TERRATEC, 0x00d3,
+		&rtl28xxu_props, "TerraTec Cinergy T Stick RC (Rev. 3)", NULL) },
+	{ DVB_USB_DEVICE(USB_VID_DEXATEK, 0x1102,
+		&rtl28xxu_props, "Dexatek DK mini DVB-T Dongle", NULL) },
+	{ DVB_USB_DEVICE(USB_VID_TERRATEC, 0x00d7,
+		&rtl28xxu_props, "TerraTec Cinergy T Stick+", NULL) },
+	{ DVB_USB_DEVICE(USB_VID_KWORLD_2, 0xd3a8,
+		&rtl28xxu_props, "ASUS My Cinema-U3100Mini Plus V2", NULL) },
+	{ DVB_USB_DEVICE(USB_VID_KWORLD_2, 0xd393,
+		&rtl28xxu_props, "GIGABYTE U7300", NULL) },
+	{ DVB_USB_DEVICE(USB_VID_DEXATEK, 0x1104,
+		&rtl28xxu_props, "MSI DIGIVOX Micro HD", NULL) },
+	{ DVB_USB_DEVICE(USB_VID_COMPRO, 0x0620,
+		&rtl28xxu_props, "Compro VideoMate U620F", NULL) },
+	{ DVB_USB_DEVICE(USB_VID_KWORLD_2, 0xd394,
+		&rtl28xxu_props, "MaxMedia HU394-T", NULL) },
+	{ DVB_USB_DEVICE(USB_VID_LEADTEK, 0x6a03,
+		&rtl28xxu_props, "Leadtek WinFast DTV Dongle mini", NULL) },
+	{ DVB_USB_DEVICE(USB_VID_GTEK, USB_PID_CPYTO_REDI_PC50A,
+		&rtl28xxu_props, "Crypto ReDi PC 50 A", NULL) },
+	{ DVB_USB_DEVICE(USB_VID_KYE, 0x707f,
+		&rtl28xxu_props, "Genius TVGo DVB-T03", NULL) },
+	{ DVB_USB_DEVICE(USB_VID_KWORLD_2, 0xd395,
+		&rtl28xxu_props, "Peak DVB-T USB", NULL) },
+	{ DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_SVEON_STV20_RTL2832U,
+		&rtl28xxu_props, "Sveon STV20", NULL) },
+	{ DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_SVEON_STV21,
+		&rtl28xxu_props, "Sveon STV21", NULL) },
+	{ DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_SVEON_STV27,
+		&rtl28xxu_props, "Sveon STV27", NULL) },
+	{ DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_TURBOX_DTT_2000,
+		&rtl28xxu_props, "TURBO-X Pure TV Tuner DTT-2000", NULL) },
+
+	/* RTL2832P devices: */
+	{ DVB_USB_DEVICE(USB_VID_HANFTEK, 0x0131,
+		&rtl28xxu_props, "Astrometa DVB-T2", NULL) },
+	{ }
+};
+MODULE_DEVICE_TABLE(usb, rtl28xxu_id_table);
+
+static struct usb_driver rtl28xxu_usb_driver = {
+	.name = KBUILD_MODNAME,
+	.id_table = rtl28xxu_id_table,
+	.probe = dvb_usbv2_probe,
+	.disconnect = dvb_usbv2_disconnect,
+	.suspend = dvb_usbv2_suspend,
+	.resume = dvb_usbv2_resume,
+	.reset_resume = dvb_usbv2_reset_resume,
+	.no_dynamic_id = 1,
+	.soft_unbind = 1,
+};
+
+module_usb_driver(rtl28xxu_usb_driver);
+
+MODULE_DESCRIPTION("Realtek RTL28xxU DVB USB driver");
+MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
+MODULE_AUTHOR("Thomas Mair <thomas.mair86@googlemail.com>");
+MODULE_LICENSE("GPL");