Initial import

1 files changed, 1751 insertions, 0 deletions

diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c
new file mode 100644
index 000000000..91077efc8
--- /dev/null
+++ b/drivers/mfd/sm501.c
@@ -0,0 +1,1751 @@
+/* linux/drivers/mfd/sm501.c
+ *
+ * Copyright (C) 2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	Vincent Sanders <vince@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * SM501 MFD driver
+*/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/i2c-gpio.h>
+#include <linux/slab.h>
+
+#include <linux/sm501.h>
+#include <linux/sm501-regs.h>
+#include <linux/serial_8250.h>
+
+#include <linux/io.h>
+
+struct sm501_device {
+	struct list_head		list;
+	struct platform_device		pdev;
+};
+
+struct sm501_gpio;
+
+#ifdef CONFIG_MFD_SM501_GPIO
+#include <linux/gpio.h>
+
+struct sm501_gpio_chip {
+	struct gpio_chip	gpio;
+	struct sm501_gpio	*ourgpio;	/* to get back to parent. */
+	void __iomem		*regbase;
+	void __iomem		*control;	/* address of control reg. */
+};
+
+struct sm501_gpio {
+	struct sm501_gpio_chip	low;
+	struct sm501_gpio_chip	high;
+	spinlock_t		lock;
+
+	unsigned int		 registered : 1;
+	void __iomem		*regs;
+	struct resource		*regs_res;
+};
+#else
+struct sm501_gpio {
+	/* no gpio support, empty definition for sm501_devdata. */
+};
+#endif
+
+struct sm501_devdata {
+	spinlock_t			 reg_lock;
+	struct mutex			 clock_lock;
+	struct list_head		 devices;
+	struct sm501_gpio		 gpio;
+
+	struct device			*dev;
+	struct resource			*io_res;
+	struct resource			*mem_res;
+	struct resource			*regs_claim;
+	struct sm501_platdata		*platdata;
+
+
+	unsigned int			 in_suspend;
+	unsigned long			 pm_misc;
+
+	int				 unit_power[20];
+	unsigned int			 pdev_id;
+	unsigned int			 irq;
+	void __iomem			*regs;
+	unsigned int			 rev;
+};
+
+
+#define MHZ (1000 * 1000)
+
+#ifdef DEBUG
+static const unsigned int div_tab[] = {
+	[0]		= 1,
+	[1]		= 2,
+	[2]		= 4,
+	[3]		= 8,
+	[4]		= 16,
+	[5]		= 32,
+	[6]		= 64,
+	[7]		= 128,
+	[8]		= 3,
+	[9]		= 6,
+	[10]	        = 12,
+	[11]		= 24,
+	[12]		= 48,
+	[13]		= 96,
+	[14]		= 192,
+	[15]		= 384,
+	[16]		= 5,
+	[17]		= 10,
+	[18]		= 20,
+	[19]		= 40,
+	[20]		= 80,
+	[21]		= 160,
+	[22]		= 320,
+	[23]		= 604,
+};
+
+static unsigned long decode_div(unsigned long pll2, unsigned long val,
+				unsigned int lshft, unsigned int selbit,
+				unsigned long mask)
+{
+	if (val & selbit)
+		pll2 = 288 * MHZ;
+
+	return pll2 / div_tab[(val >> lshft) & mask];
+}
+
+#define fmt_freq(x) ((x) / MHZ), ((x) % MHZ), (x)
+
+/* sm501_dump_clk
+ *
+ * Print out the current clock configuration for the device
+*/
+
+static void sm501_dump_clk(struct sm501_devdata *sm)
+{
+	unsigned long misct = smc501_readl(sm->regs + SM501_MISC_TIMING);
+	unsigned long pm0 = smc501_readl(sm->regs + SM501_POWER_MODE_0_CLOCK);
+	unsigned long pm1 = smc501_readl(sm->regs + SM501_POWER_MODE_1_CLOCK);
+	unsigned long pmc = smc501_readl(sm->regs + SM501_POWER_MODE_CONTROL);
+	unsigned long sdclk0, sdclk1;
+	unsigned long pll2 = 0;
+
+	switch (misct & 0x30) {
+	case 0x00:
+		pll2 = 336 * MHZ;
+		break;
+	case 0x10:
+		pll2 = 288 * MHZ;
+		break;
+	case 0x20:
+		pll2 = 240 * MHZ;
+		break;
+	case 0x30:
+		pll2 = 192 * MHZ;
+		break;
+	}
+
+	sdclk0 = (misct & (1<<12)) ? pll2 : 288 * MHZ;
+	sdclk0 /= div_tab[((misct >> 8) & 0xf)];
+
+	sdclk1 = (misct & (1<<20)) ? pll2 : 288 * MHZ;
+	sdclk1 /= div_tab[((misct >> 16) & 0xf)];
+
+	dev_dbg(sm->dev, "MISCT=%08lx, PM0=%08lx, PM1=%08lx\n",
+		misct, pm0, pm1);
+
+	dev_dbg(sm->dev, "PLL2 = %ld.%ld MHz (%ld), SDCLK0=%08lx, SDCLK1=%08lx\n",
+		fmt_freq(pll2), sdclk0, sdclk1);
+
+	dev_dbg(sm->dev, "SDRAM: PM0=%ld, PM1=%ld\n", sdclk0, sdclk1);
+
+	dev_dbg(sm->dev, "PM0[%c]: "
+		 "P2 %ld.%ld MHz (%ld), V2 %ld.%ld (%ld), "
+		 "M %ld.%ld (%ld), MX1 %ld.%ld (%ld)\n",
+		 (pmc & 3 ) == 0 ? '*' : '-',
+		 fmt_freq(decode_div(pll2, pm0, 24, 1<<29, 31)),
+		 fmt_freq(decode_div(pll2, pm0, 16, 1<<20, 15)),
+		 fmt_freq(decode_div(pll2, pm0, 8,  1<<12, 15)),
+		 fmt_freq(decode_div(pll2, pm0, 0,  1<<4,  15)));
+
+	dev_dbg(sm->dev, "PM1[%c]: "
+		"P2 %ld.%ld MHz (%ld), V2 %ld.%ld (%ld), "
+		"M %ld.%ld (%ld), MX1 %ld.%ld (%ld)\n",
+		(pmc & 3 ) == 1 ? '*' : '-',
+		fmt_freq(decode_div(pll2, pm1, 24, 1<<29, 31)),
+		fmt_freq(decode_div(pll2, pm1, 16, 1<<20, 15)),
+		fmt_freq(decode_div(pll2, pm1, 8,  1<<12, 15)),
+		fmt_freq(decode_div(pll2, pm1, 0,  1<<4,  15)));
+}
+
+static void sm501_dump_regs(struct sm501_devdata *sm)
+{
+	void __iomem *regs = sm->regs;
+
+	dev_info(sm->dev, "System Control   %08x\n",
+			smc501_readl(regs + SM501_SYSTEM_CONTROL));
+	dev_info(sm->dev, "Misc Control     %08x\n",
+			smc501_readl(regs + SM501_MISC_CONTROL));
+	dev_info(sm->dev, "GPIO Control Low %08x\n",
+			smc501_readl(regs + SM501_GPIO31_0_CONTROL));
+	dev_info(sm->dev, "GPIO Control Hi  %08x\n",
+			smc501_readl(regs + SM501_GPIO63_32_CONTROL));
+	dev_info(sm->dev, "DRAM Control     %08x\n",
+			smc501_readl(regs + SM501_DRAM_CONTROL));
+	dev_info(sm->dev, "Arbitration Ctrl %08x\n",
+			smc501_readl(regs + SM501_ARBTRTN_CONTROL));
+	dev_info(sm->dev, "Misc Timing      %08x\n",
+			smc501_readl(regs + SM501_MISC_TIMING));
+}
+
+static void sm501_dump_gate(struct sm501_devdata *sm)
+{
+	dev_info(sm->dev, "CurrentGate      %08x\n",
+			smc501_readl(sm->regs + SM501_CURRENT_GATE));
+	dev_info(sm->dev, "CurrentClock     %08x\n",
+			smc501_readl(sm->regs + SM501_CURRENT_CLOCK));
+	dev_info(sm->dev, "PowerModeControl %08x\n",
+			smc501_readl(sm->regs + SM501_POWER_MODE_CONTROL));
+}
+
+#else
+static inline void sm501_dump_gate(struct sm501_devdata *sm) { }
+static inline void sm501_dump_regs(struct sm501_devdata *sm) { }
+static inline void sm501_dump_clk(struct sm501_devdata *sm) { }
+#endif
+
+/* sm501_sync_regs
+ *
+ * ensure the
+*/
+
+static void sm501_sync_regs(struct sm501_devdata *sm)
+{
+	smc501_readl(sm->regs);
+}
+
+static inline void sm501_mdelay(struct sm501_devdata *sm, unsigned int delay)
+{
+	/* during suspend/resume, we are currently not allowed to sleep,
+	 * so change to using mdelay() instead of msleep() if we
+	 * are in one of these paths */
+
+	if (sm->in_suspend)
+		mdelay(delay);
+	else
+		msleep(delay);
+}
+
+/* sm501_misc_control
+ *
+ * alters the miscellaneous control parameters
+*/
+
+int sm501_misc_control(struct device *dev,
+		       unsigned long set, unsigned long clear)
+{
+	struct sm501_devdata *sm = dev_get_drvdata(dev);
+	unsigned long misc;
+	unsigned long save;
+	unsigned long to;
+
+	spin_lock_irqsave(&sm->reg_lock, save);
+
+	misc = smc501_readl(sm->regs + SM501_MISC_CONTROL);
+	to = (misc & ~clear) | set;
+
+	if (to != misc) {
+		smc501_writel(to, sm->regs + SM501_MISC_CONTROL);
+		sm501_sync_regs(sm);
+
+		dev_dbg(sm->dev, "MISC_CONTROL %08lx\n", misc);
+	}
+
+	spin_unlock_irqrestore(&sm->reg_lock, save);
+	return to;
+}
+
+EXPORT_SYMBOL_GPL(sm501_misc_control);
+
+/* sm501_modify_reg
+ *
+ * Modify a register in the SM501 which may be shared with other
+ * drivers.
+*/
+
+unsigned long sm501_modify_reg(struct device *dev,
+			       unsigned long reg,
+			       unsigned long set,
+			       unsigned long clear)
+{
+	struct sm501_devdata *sm = dev_get_drvdata(dev);
+	unsigned long data;
+	unsigned long save;
+
+	spin_lock_irqsave(&sm->reg_lock, save);
+
+	data = smc501_readl(sm->regs + reg);
+	data |= set;
+	data &= ~clear;
+
+	smc501_writel(data, sm->regs + reg);
+	sm501_sync_regs(sm);
+
+	spin_unlock_irqrestore(&sm->reg_lock, save);
+
+	return data;
+}
+
+EXPORT_SYMBOL_GPL(sm501_modify_reg);
+
+/* sm501_unit_power
+ *
+ * alters the power active gate to set specific units on or off
+ */
+
+int sm501_unit_power(struct device *dev, unsigned int unit, unsigned int to)
+{
+	struct sm501_devdata *sm = dev_get_drvdata(dev);
+	unsigned long mode;
+	unsigned long gate;
+	unsigned long clock;
+
+	mutex_lock(&sm->clock_lock);
+
+	mode = smc501_readl(sm->regs + SM501_POWER_MODE_CONTROL);
+	gate = smc501_readl(sm->regs + SM501_CURRENT_GATE);
+	clock = smc501_readl(sm->regs + SM501_CURRENT_CLOCK);
+
+	mode &= 3;		/* get current power mode */
+
+	if (unit >= ARRAY_SIZE(sm->unit_power)) {
+		dev_err(dev, "%s: bad unit %d\n", __func__, unit);
+		goto already;
+	}
+
+	dev_dbg(sm->dev, "%s: unit %d, cur %d, to %d\n", __func__, unit,
+		sm->unit_power[unit], to);
+
+	if (to == 0 && sm->unit_power[unit] == 0) {
+		dev_err(sm->dev, "unit %d is already shutdown\n", unit);
+		goto already;
+	}
+
+	sm->unit_power[unit] += to ? 1 : -1;
+	to = sm->unit_power[unit] ? 1 : 0;
+
+	if (to) {
+		if (gate & (1 << unit))
+			goto already;
+		gate |= (1 << unit);
+	} else {
+		if (!(gate & (1 << unit)))
+			goto already;
+		gate &= ~(1 << unit);
+	}
+
+	switch (mode) {
+	case 1:
+		smc501_writel(gate, sm->regs + SM501_POWER_MODE_0_GATE);
+		smc501_writel(clock, sm->regs + SM501_POWER_MODE_0_CLOCK);
+		mode = 0;
+		break;
+	case 2:
+	case 0:
+		smc501_writel(gate, sm->regs + SM501_POWER_MODE_1_GATE);
+		smc501_writel(clock, sm->regs + SM501_POWER_MODE_1_CLOCK);
+		mode = 1;
+		break;
+
+	default:
+		gate = -1;
+		goto already;
+	}
+
+	smc501_writel(mode, sm->regs + SM501_POWER_MODE_CONTROL);
+	sm501_sync_regs(sm);
+
+	dev_dbg(sm->dev, "gate %08lx, clock %08lx, mode %08lx\n",
+		gate, clock, mode);
+
+	sm501_mdelay(sm, 16);
+
+ already:
+	mutex_unlock(&sm->clock_lock);
+	return gate;
+}
+
+EXPORT_SYMBOL_GPL(sm501_unit_power);
+
+/* clock value structure. */
+struct sm501_clock {
+	unsigned long mclk;
+	int divider;
+	int shift;
+	unsigned int m, n, k;
+};
+
+/* sm501_calc_clock
+ *
+ * Calculates the nearest discrete clock frequency that
+ * can be achieved with the specified input clock.
+ *   the maximum divisor is 3 or 5
+ */
+
+static int sm501_calc_clock(unsigned long freq,
+			    struct sm501_clock *clock,
+			    int max_div,
+			    unsigned long mclk,
+			    long *best_diff)
+{
+	int ret = 0;
+	int divider;
+	int shift;
+	long diff;
+
+	/* try dividers 1 and 3 for CRT and for panel,
+	   try divider 5 for panel only.*/
+
+	for (divider = 1; divider <= max_div; divider += 2) {
+		/* try all 8 shift values.*/
+		for (shift = 0; shift < 8; shift++) {
+			/* Calculate difference to requested clock */
+			diff = DIV_ROUND_CLOSEST(mclk, divider << shift) - freq;
+			if (diff < 0)
+				diff = -diff;
+
+			/* If it is less than the current, use it */
+			if (diff < *best_diff) {
+				*best_diff = diff;
+
+				clock->mclk = mclk;
+				clock->divider = divider;
+				clock->shift = shift;
+				ret = 1;
+			}
+		}
+	}
+
+	return ret;
+}
+
+/* sm501_calc_pll
+ *
+ * Calculates the nearest discrete clock frequency that can be
+ * achieved using the programmable PLL.
+ *   the maximum divisor is 3 or 5
+ */
+
+static unsigned long sm501_calc_pll(unsigned long freq,
+					struct sm501_clock *clock,
+					int max_div)
+{
+	unsigned long mclk;
+	unsigned int m, n, k;
+	long best_diff = 999999999;
+
+	/*
+	 * The SM502 datasheet doesn't specify the min/max values for M and N.
+	 * N = 1 at least doesn't work in practice.
+	 */
+	for (m = 2; m <= 255; m++) {
+		for (n = 2; n <= 127; n++) {
+			for (k = 0; k <= 1; k++) {
+				mclk = (24000000UL * m / n) >> k;
+
+				if (sm501_calc_clock(freq, clock, max_div,
+						     mclk, &best_diff)) {
+					clock->m = m;
+					clock->n = n;
+					clock->k = k;
+				}
+			}
+		}
+	}
+
+	/* Return best clock. */
+	return clock->mclk / (clock->divider << clock->shift);
+}
+
+/* sm501_select_clock
+ *
+ * Calculates the nearest discrete clock frequency that can be
+ * achieved using the 288MHz and 336MHz PLLs.
+ *   the maximum divisor is 3 or 5
+ */
+
+static unsigned long sm501_select_clock(unsigned long freq,
+					struct sm501_clock *clock,
+					int max_div)
+{
+	unsigned long mclk;
+	long best_diff = 999999999;
+
+	/* Try 288MHz and 336MHz clocks. */
+	for (mclk = 288000000; mclk <= 336000000; mclk += 48000000) {
+		sm501_calc_clock(freq, clock, max_div, mclk, &best_diff);
+	}
+
+	/* Return best clock. */
+	return clock->mclk / (clock->divider << clock->shift);
+}
+
+/* sm501_set_clock
+ *
+ * set one of the four clock sources to the closest available frequency to
+ *  the one specified
+*/
+
+unsigned long sm501_set_clock(struct device *dev,
+			      int clksrc,
+			      unsigned long req_freq)
+{
+	struct sm501_devdata *sm = dev_get_drvdata(dev);
+	unsigned long mode = smc501_readl(sm->regs + SM501_POWER_MODE_CONTROL);
+	unsigned long gate = smc501_readl(sm->regs + SM501_CURRENT_GATE);
+	unsigned long clock = smc501_readl(sm->regs + SM501_CURRENT_CLOCK);
+	unsigned int pll_reg = 0;
+	unsigned long sm501_freq; /* the actual frequency achieved */
+	u64 reg;
+
+	struct sm501_clock to;
+
+	/* find achivable discrete frequency and setup register value
+	 * accordingly, V2XCLK, MCLK and M1XCLK are the same P2XCLK
+	 * has an extra bit for the divider */
+
+	switch (clksrc) {
+	case SM501_CLOCK_P2XCLK:
+		/* This clock is divided in half so to achieve the
+		 * requested frequency the value must be multiplied by
+		 * 2. This clock also has an additional pre divisor */
+
+		if (sm->rev >= 0xC0) {
+			/* SM502 -> use the programmable PLL */
+			sm501_freq = (sm501_calc_pll(2 * req_freq,
+						     &to, 5) / 2);
+			reg = to.shift & 0x07;/* bottom 3 bits are shift */
+			if (to.divider == 3)
+				reg |= 0x08; /* /3 divider required */
+			else if (to.divider == 5)
+				reg |= 0x10; /* /5 divider required */
+			reg |= 0x40; /* select the programmable PLL */
+			pll_reg = 0x20000 | (to.k << 15) | (to.n << 8) | to.m;
+		} else {
+			sm501_freq = (sm501_select_clock(2 * req_freq,
+							 &to, 5) / 2);
+			reg = to.shift & 0x07;/* bottom 3 bits are shift */
+			if (to.divider == 3)
+				reg |= 0x08; /* /3 divider required */
+			else if (to.divider == 5)
+				reg |= 0x10; /* /5 divider required */
+			if (to.mclk != 288000000)
+				reg |= 0x20; /* which mclk pll is source */
+		}
+		break;
+
+	case SM501_CLOCK_V2XCLK:
+		/* This clock is divided in half so to achieve the
+		 * requested frequency the value must be multiplied by 2. */
+
+		sm501_freq = (sm501_select_clock(2 * req_freq, &to, 3) / 2);
+		reg=to.shift & 0x07;	/* bottom 3 bits are shift */
+		if (to.divider == 3)
+			reg |= 0x08;	/* /3 divider required */
+		if (to.mclk != 288000000)
+			reg |= 0x10;	/* which mclk pll is source */
+		break;
+
+	case SM501_CLOCK_MCLK:
+	case SM501_CLOCK_M1XCLK:
+		/* These clocks are the same and not further divided */
+
+		sm501_freq = sm501_select_clock( req_freq, &to, 3);
+		reg=to.shift & 0x07;	/* bottom 3 bits are shift */
+		if (to.divider == 3)
+			reg |= 0x08;	/* /3 divider required */
+		if (to.mclk != 288000000)
+			reg |= 0x10;	/* which mclk pll is source */
+		break;
+
+	default:
+		return 0; /* this is bad */
+	}
+
+	mutex_lock(&sm->clock_lock);
+
+	mode = smc501_readl(sm->regs + SM501_POWER_MODE_CONTROL);
+	gate = smc501_readl(sm->regs + SM501_CURRENT_GATE);
+	clock = smc501_readl(sm->regs + SM501_CURRENT_CLOCK);
+
+	clock = clock & ~(0xFF << clksrc);
+	clock |= reg<<clksrc;
+
+	mode &= 3;	/* find current mode */
+
+	switch (mode) {
+	case 1:
+		smc501_writel(gate, sm->regs + SM501_POWER_MODE_0_GATE);
+		smc501_writel(clock, sm->regs + SM501_POWER_MODE_0_CLOCK);
+		mode = 0;
+		break;
+	case 2:
+	case 0:
+		smc501_writel(gate, sm->regs + SM501_POWER_MODE_1_GATE);
+		smc501_writel(clock, sm->regs + SM501_POWER_MODE_1_CLOCK);
+		mode = 1;
+		break;
+
+	default:
+		mutex_unlock(&sm->clock_lock);
+		return -1;
+	}
+
+	smc501_writel(mode, sm->regs + SM501_POWER_MODE_CONTROL);
+
+	if (pll_reg)
+		smc501_writel(pll_reg,
+				sm->regs + SM501_PROGRAMMABLE_PLL_CONTROL);
+
+	sm501_sync_regs(sm);
+
+	dev_dbg(sm->dev, "gate %08lx, clock %08lx, mode %08lx\n",
+		gate, clock, mode);
+
+	sm501_mdelay(sm, 16);
+	mutex_unlock(&sm->clock_lock);
+
+	sm501_dump_clk(sm);
+
+	return sm501_freq;
+}
+
+EXPORT_SYMBOL_GPL(sm501_set_clock);
+
+/* sm501_find_clock
+ *
+ * finds the closest available frequency for a given clock
+*/
+
+unsigned long sm501_find_clock(struct device *dev,
+			       int clksrc,
+			       unsigned long req_freq)
+{
+	struct sm501_devdata *sm = dev_get_drvdata(dev);
+	unsigned long sm501_freq; /* the frequency achieveable by the 501 */
+	struct sm501_clock to;
+
+	switch (clksrc) {
+	case SM501_CLOCK_P2XCLK:
+		if (sm->rev >= 0xC0) {
+			/* SM502 -> use the programmable PLL */
+			sm501_freq = (sm501_calc_pll(2 * req_freq,
+						     &to, 5) / 2);
+		} else {
+			sm501_freq = (sm501_select_clock(2 * req_freq,
+							 &to, 5) / 2);
+		}
+		break;
+
+	case SM501_CLOCK_V2XCLK:
+		sm501_freq = (sm501_select_clock(2 * req_freq, &to, 3) / 2);
+		break;
+
+	case SM501_CLOCK_MCLK:
+	case SM501_CLOCK_M1XCLK:
+		sm501_freq = sm501_select_clock(req_freq, &to, 3);
+		break;
+
+	default:
+		sm501_freq = 0;		/* error */
+	}
+
+	return sm501_freq;
+}
+
+EXPORT_SYMBOL_GPL(sm501_find_clock);
+
+static struct sm501_device *to_sm_device(struct platform_device *pdev)
+{
+	return container_of(pdev, struct sm501_device, pdev);
+}
+
+/* sm501_device_release
+ *
+ * A release function for the platform devices we create to allow us to
+ * free any items we allocated
+*/
+
+static void sm501_device_release(struct device *dev)
+{
+	kfree(to_sm_device(to_platform_device(dev)));
+}
+
+/* sm501_create_subdev
+ *
+ * Create a skeleton platform device with resources for passing to a
+ * sub-driver
+*/
+
+static struct platform_device *
+sm501_create_subdev(struct sm501_devdata *sm, char *name,
+		    unsigned int res_count, unsigned int platform_data_size)
+{
+	struct sm501_device *smdev;
+
+	smdev = kzalloc(sizeof(struct sm501_device) +
+			(sizeof(struct resource) * res_count) +
+			platform_data_size, GFP_KERNEL);
+	if (!smdev)
+		return NULL;
+
+	smdev->pdev.dev.release = sm501_device_release;
+
+	smdev->pdev.name = name;
+	smdev->pdev.id = sm->pdev_id;
+	smdev->pdev.dev.parent = sm->dev;
+
+	if (res_count) {
+		smdev->pdev.resource = (struct resource *)(smdev+1);
+		smdev->pdev.num_resources = res_count;
+	}
+	if (platform_data_size)
+		smdev->pdev.dev.platform_data = (void *)(smdev+1);
+
+	return &smdev->pdev;
+}
+
+/* sm501_register_device
+ *
+ * Register a platform device created with sm501_create_subdev()
+*/
+
+static int sm501_register_device(struct sm501_devdata *sm,
+				 struct platform_device *pdev)
+{
+	struct sm501_device *smdev = to_sm_device(pdev);
+	int ptr;
+	int ret;
+
+	for (ptr = 0; ptr < pdev->num_resources; ptr++) {
+		printk(KERN_DEBUG "%s[%d] %pR\n",
+		       pdev->name, ptr, &pdev->resource[ptr]);
+	}
+
+	ret = platform_device_register(pdev);
+
+	if (ret >= 0) {
+		dev_dbg(sm->dev, "registered %s\n", pdev->name);
+		list_add_tail(&smdev->list, &sm->devices);
+	} else
+		dev_err(sm->dev, "error registering %s (%d)\n",
+			pdev->name, ret);
+
+	return ret;
+}
+
+/* sm501_create_subio
+ *
+ * Fill in an IO resource for a sub device
+*/
+
+static void sm501_create_subio(struct sm501_devdata *sm,
+			       struct resource *res,
+			       resource_size_t offs,
+			       resource_size_t size)
+{
+	res->flags = IORESOURCE_MEM;
+	res->parent = sm->io_res;
+	res->start = sm->io_res->start + offs;
+	res->end = res->start + size - 1;
+}
+
+/* sm501_create_mem
+ *
+ * Fill in an MEM resource for a sub device
+*/
+
+static void sm501_create_mem(struct sm501_devdata *sm,
+			     struct resource *res,
+			     resource_size_t *offs,
+			     resource_size_t size)
+{
+	*offs -= size;		/* adjust memory size */
+
+	res->flags = IORESOURCE_MEM;
+	res->parent = sm->mem_res;
+	res->start = sm->mem_res->start + *offs;
+	res->end = res->start + size - 1;
+}
+
+/* sm501_create_irq
+ *
+ * Fill in an IRQ resource for a sub device
+*/
+
+static void sm501_create_irq(struct sm501_devdata *sm,
+			     struct resource *res)
+{
+	res->flags = IORESOURCE_IRQ;
+	res->parent = NULL;
+	res->start = res->end = sm->irq;
+}
+
+static int sm501_register_usbhost(struct sm501_devdata *sm,
+				  resource_size_t *mem_avail)
+{
+	struct platform_device *pdev;
+
+	pdev = sm501_create_subdev(sm, "sm501-usb", 3, 0);
+	if (!pdev)
+		return -ENOMEM;
+
+	sm501_create_subio(sm, &pdev->resource[0], 0x40000, 0x20000);
+	sm501_create_mem(sm, &pdev->resource[1], mem_avail, 256*1024);
+	sm501_create_irq(sm, &pdev->resource[2]);
+
+	return sm501_register_device(sm, pdev);
+}
+
+static void sm501_setup_uart_data(struct sm501_devdata *sm,
+				  struct plat_serial8250_port *uart_data,
+				  unsigned int offset)
+{
+	uart_data->membase = sm->regs + offset;
+	uart_data->mapbase = sm->io_res->start + offset;
+	uart_data->iotype = UPIO_MEM;
+	uart_data->irq = sm->irq;
+	uart_data->flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ;
+	uart_data->regshift = 2;
+	uart_data->uartclk = (9600 * 16);
+}
+
+static int sm501_register_uart(struct sm501_devdata *sm, int devices)
+{
+	struct platform_device *pdev;
+	struct plat_serial8250_port *uart_data;
+
+	pdev = sm501_create_subdev(sm, "serial8250", 0,
+				   sizeof(struct plat_serial8250_port) * 3);
+	if (!pdev)
+		return -ENOMEM;
+
+	uart_data = dev_get_platdata(&pdev->dev);
+
+	if (devices & SM501_USE_UART0) {
+		sm501_setup_uart_data(sm, uart_data++, 0x30000);
+		sm501_unit_power(sm->dev, SM501_GATE_UART0, 1);
+		sm501_modify_reg(sm->dev, SM501_IRQ_MASK, 1 << 12, 0);
+		sm501_modify_reg(sm->dev, SM501_GPIO63_32_CONTROL, 0x01e0, 0);
+	}
+	if (devices & SM501_USE_UART1) {
+		sm501_setup_uart_data(sm, uart_data++, 0x30020);
+		sm501_unit_power(sm->dev, SM501_GATE_UART1, 1);
+		sm501_modify_reg(sm->dev, SM501_IRQ_MASK, 1 << 13, 0);
+		sm501_modify_reg(sm->dev, SM501_GPIO63_32_CONTROL, 0x1e00, 0);
+	}
+
+	pdev->id = PLAT8250_DEV_SM501;
+
+	return sm501_register_device(sm, pdev);
+}
+
+static int sm501_register_display(struct sm501_devdata *sm,
+				  resource_size_t *mem_avail)
+{
+	struct platform_device *pdev;
+
+	pdev = sm501_create_subdev(sm, "sm501-fb", 4, 0);
+	if (!pdev)
+		return -ENOMEM;
+
+	sm501_create_subio(sm, &pdev->resource[0], 0x80000, 0x10000);
+	sm501_create_subio(sm, &pdev->resource[1], 0x100000, 0x50000);
+	sm501_create_mem(sm, &pdev->resource[2], mem_avail, *mem_avail);
+	sm501_create_irq(sm, &pdev->resource[3]);
+
+	return sm501_register_device(sm, pdev);
+}
+
+#ifdef CONFIG_MFD_SM501_GPIO
+
+static inline struct sm501_gpio_chip *to_sm501_gpio(struct gpio_chip *gc)
+{
+	return container_of(gc, struct sm501_gpio_chip, gpio);
+}
+
+static inline struct sm501_devdata *sm501_gpio_to_dev(struct sm501_gpio *gpio)
+{
+	return container_of(gpio, struct sm501_devdata, gpio);
+}
+
+static int sm501_gpio_get(struct gpio_chip *chip, unsigned offset)
+
+{
+	struct sm501_gpio_chip *smgpio = to_sm501_gpio(chip);
+	unsigned long result;
+
+	result = smc501_readl(smgpio->regbase + SM501_GPIO_DATA_LOW);
+	result >>= offset;
+
+	return result & 1UL;
+}
+
+static void sm501_gpio_ensure_gpio(struct sm501_gpio_chip *smchip,
+				   unsigned long bit)
+{
+	unsigned long ctrl;
+
+	/* check and modify if this pin is not set as gpio. */
+
+	if (smc501_readl(smchip->control) & bit) {
+		dev_info(sm501_gpio_to_dev(smchip->ourgpio)->dev,
+			 "changing mode of gpio, bit %08lx\n", bit);
+
+		ctrl = smc501_readl(smchip->control);
+		ctrl &= ~bit;
+		smc501_writel(ctrl, smchip->control);
+
+		sm501_sync_regs(sm501_gpio_to_dev(smchip->ourgpio));
+	}
+}
+
+static void sm501_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+
+{
+	struct sm501_gpio_chip *smchip = to_sm501_gpio(chip);
+	struct sm501_gpio *smgpio = smchip->ourgpio;
+	unsigned long bit = 1 << offset;
+	void __iomem *regs = smchip->regbase;
+	unsigned long save;
+	unsigned long val;
+
+	dev_dbg(sm501_gpio_to_dev(smgpio)->dev, "%s(%p,%d)\n",
+		__func__, chip, offset);
+
+	spin_lock_irqsave(&smgpio->lock, save);
+
+	val = smc501_readl(regs + SM501_GPIO_DATA_LOW) & ~bit;
+	if (value)
+		val |= bit;
+	smc501_writel(val, regs);
+
+	sm501_sync_regs(sm501_gpio_to_dev(smgpio));
+	sm501_gpio_ensure_gpio(smchip, bit);
+
+	spin_unlock_irqrestore(&smgpio->lock, save);
+}
+
+static int sm501_gpio_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct sm501_gpio_chip *smchip = to_sm501_gpio(chip);
+	struct sm501_gpio *smgpio = smchip->ourgpio;
+	void __iomem *regs = smchip->regbase;
+	unsigned long bit = 1 << offset;
+	unsigned long save;
+	unsigned long ddr;
+
+	dev_dbg(sm501_gpio_to_dev(smgpio)->dev, "%s(%p,%d)\n",
+		__func__, chip, offset);
+
+	spin_lock_irqsave(&smgpio->lock, save);
+
+	ddr = smc501_readl(regs + SM501_GPIO_DDR_LOW);
+	smc501_writel(ddr & ~bit, regs + SM501_GPIO_DDR_LOW);
+
+	sm501_sync_regs(sm501_gpio_to_dev(smgpio));
+	sm501_gpio_ensure_gpio(smchip, bit);
+
+	spin_unlock_irqrestore(&smgpio->lock, save);
+
+	return 0;
+}
+
+static int sm501_gpio_output(struct gpio_chip *chip,
+			     unsigned offset, int value)
+{
+	struct sm501_gpio_chip *smchip = to_sm501_gpio(chip);
+	struct sm501_gpio *smgpio = smchip->ourgpio;
+	unsigned long bit = 1 << offset;
+	void __iomem *regs = smchip->regbase;
+	unsigned long save;
+	unsigned long val;
+	unsigned long ddr;
+
+	dev_dbg(sm501_gpio_to_dev(smgpio)->dev, "%s(%p,%d,%d)\n",
+		__func__, chip, offset, value);
+
+	spin_lock_irqsave(&smgpio->lock, save);
+
+	val = smc501_readl(regs + SM501_GPIO_DATA_LOW);
+	if (value)
+		val |= bit;
+	else
+		val &= ~bit;
+	smc501_writel(val, regs);
+
+	ddr = smc501_readl(regs + SM501_GPIO_DDR_LOW);
+	smc501_writel(ddr | bit, regs + SM501_GPIO_DDR_LOW);
+
+	sm501_sync_regs(sm501_gpio_to_dev(smgpio));
+	smc501_writel(val, regs + SM501_GPIO_DATA_LOW);
+
+	sm501_sync_regs(sm501_gpio_to_dev(smgpio));
+	spin_unlock_irqrestore(&smgpio->lock, save);
+
+	return 0;
+}
+
+static struct gpio_chip gpio_chip_template = {
+	.ngpio			= 32,
+	.direction_input	= sm501_gpio_input,
+	.direction_output	= sm501_gpio_output,
+	.set			= sm501_gpio_set,
+	.get			= sm501_gpio_get,
+};
+
+static int sm501_gpio_register_chip(struct sm501_devdata *sm,
+					      struct sm501_gpio *gpio,
+					      struct sm501_gpio_chip *chip)
+{
+	struct sm501_platdata *pdata = sm->platdata;
+	struct gpio_chip *gchip = &chip->gpio;
+	int base = pdata->gpio_base;
+
+	chip->gpio = gpio_chip_template;
+
+	if (chip == &gpio->high) {
+		if (base > 0)
+			base += 32;
+		chip->regbase = gpio->regs + SM501_GPIO_DATA_HIGH;
+		chip->control = sm->regs + SM501_GPIO63_32_CONTROL;
+		gchip->label  = "SM501-HIGH";
+	} else {
+		chip->regbase = gpio->regs + SM501_GPIO_DATA_LOW;
+		chip->control = sm->regs + SM501_GPIO31_0_CONTROL;
+		gchip->label  = "SM501-LOW";
+	}
+
+	gchip->base   = base;
+	chip->ourgpio = gpio;
+
+	return gpiochip_add(gchip);
+}
+
+static int sm501_register_gpio(struct sm501_devdata *sm)
+{
+	struct sm501_gpio *gpio = &sm->gpio;
+	resource_size_t iobase = sm->io_res->start + SM501_GPIO;
+	int ret;
+
+	dev_dbg(sm->dev, "registering gpio block %08llx\n",
+		(unsigned long long)iobase);
+
+	spin_lock_init(&gpio->lock);
+
+	gpio->regs_res = request_mem_region(iobase, 0x20, "sm501-gpio");
+	if (gpio->regs_res == NULL) {
+		dev_err(sm->dev, "gpio: failed to request region\n");
+		return -ENXIO;
+	}
+
+	gpio->regs = ioremap(iobase, 0x20);
+	if (gpio->regs == NULL) {
+		dev_err(sm->dev, "gpio: failed to remap registers\n");
+		ret = -ENXIO;
+		goto err_claimed;
+	}
+
+	/* Register both our chips. */
+
+	ret = sm501_gpio_register_chip(sm, gpio, &gpio->low);
+	if (ret) {
+		dev_err(sm->dev, "failed to add low chip\n");
+		goto err_mapped;
+	}
+
+	ret = sm501_gpio_register_chip(sm, gpio, &gpio->high);
+	if (ret) {
+		dev_err(sm->dev, "failed to add high chip\n");
+		goto err_low_chip;
+	}
+
+	gpio->registered = 1;
+
+	return 0;
+
+ err_low_chip:
+	gpiochip_remove(&gpio->low.gpio);
+
+ err_mapped:
+	iounmap(gpio->regs);
+
+ err_claimed:
+	release_resource(gpio->regs_res);
+	kfree(gpio->regs_res);
+
+	return ret;
+}
+
+static void sm501_gpio_remove(struct sm501_devdata *sm)
+{
+	struct sm501_gpio *gpio = &sm->gpio;
+
+	if (!sm->gpio.registered)
+		return;
+
+	gpiochip_remove(&gpio->low.gpio);
+	gpiochip_remove(&gpio->high.gpio);
+
+	iounmap(gpio->regs);
+	release_resource(gpio->regs_res);
+	kfree(gpio->regs_res);
+}
+
+static inline int sm501_gpio_pin2nr(struct sm501_devdata *sm, unsigned int pin)
+{
+	struct sm501_gpio *gpio = &sm->gpio;
+	int base = (pin < 32) ? gpio->low.gpio.base : gpio->high.gpio.base;
+
+	return (pin % 32) + base;
+}
+
+static inline int sm501_gpio_isregistered(struct sm501_devdata *sm)
+{
+	return sm->gpio.registered;
+}
+#else
+static inline int sm501_register_gpio(struct sm501_devdata *sm)
+{
+	return 0;
+}
+
+static inline void sm501_gpio_remove(struct sm501_devdata *sm)
+{
+}
+
+static inline int sm501_gpio_pin2nr(struct sm501_devdata *sm, unsigned int pin)
+{
+	return -1;
+}
+
+static inline int sm501_gpio_isregistered(struct sm501_devdata *sm)
+{
+	return 0;
+}
+#endif
+
+static int sm501_register_gpio_i2c_instance(struct sm501_devdata *sm,
+					    struct sm501_platdata_gpio_i2c *iic)
+{
+	struct i2c_gpio_platform_data *icd;
+	struct platform_device *pdev;
+
+	pdev = sm501_create_subdev(sm, "i2c-gpio", 0,
+				   sizeof(struct i2c_gpio_platform_data));
+	if (!pdev)
+		return -ENOMEM;
+
+	icd = dev_get_platdata(&pdev->dev);
+
+	/* We keep the pin_sda and pin_scl fields relative in case the
+	 * same platform data is passed to >1 SM501.
+	 */
+
+	icd->sda_pin = sm501_gpio_pin2nr(sm, iic->pin_sda);
+	icd->scl_pin = sm501_gpio_pin2nr(sm, iic->pin_scl);
+	icd->timeout = iic->timeout;
+	icd->udelay = iic->udelay;
+
+	/* note, we can't use either of the pin numbers, as the i2c-gpio
+	 * driver uses the platform.id field to generate the bus number
+	 * to register with the i2c core; The i2c core doesn't have enough
+	 * entries to deal with anything we currently use.
+	*/
+
+	pdev->id = iic->bus_num;
+
+	dev_info(sm->dev, "registering i2c-%d: sda=%d (%d), scl=%d (%d)\n",
+		 iic->bus_num,
+		 icd->sda_pin, iic->pin_sda, icd->scl_pin, iic->pin_scl);
+
+	return sm501_register_device(sm, pdev);
+}
+
+static int sm501_register_gpio_i2c(struct sm501_devdata *sm,
+				   struct sm501_platdata *pdata)
+{
+	struct sm501_platdata_gpio_i2c *iic = pdata->gpio_i2c;
+	int index;
+	int ret;
+
+	for (index = 0; index < pdata->gpio_i2c_nr; index++, iic++) {
+		ret = sm501_register_gpio_i2c_instance(sm, iic);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+/* sm501_dbg_regs
+ *
+ * Debug attribute to attach to parent device to show core registers
+*/
+
+static ssize_t sm501_dbg_regs(struct device *dev,
+			      struct device_attribute *attr, char *buff)
+{
+	struct sm501_devdata *sm = dev_get_drvdata(dev)	;
+	unsigned int reg;
+	char *ptr = buff;
+	int ret;
+
+	for (reg = 0x00; reg < 0x70; reg += 4) {
+		ret = sprintf(ptr, "%08x = %08x\n",
+			      reg, smc501_readl(sm->regs + reg));
+		ptr += ret;
+	}
+
+	return ptr - buff;
+}
+
+
+static DEVICE_ATTR(dbg_regs, 0444, sm501_dbg_regs, NULL);
+
+/* sm501_init_reg
+ *
+ * Helper function for the init code to setup a register
+ *
+ * clear the bits which are set in r->mask, and then set
+ * the bits set in r->set.
+*/
+
+static inline void sm501_init_reg(struct sm501_devdata *sm,
+				  unsigned long reg,
+				  struct sm501_reg_init *r)
+{
+	unsigned long tmp;
+
+	tmp = smc501_readl(sm->regs + reg);
+	tmp &= ~r->mask;
+	tmp |= r->set;
+	smc501_writel(tmp, sm->regs + reg);
+}
+
+/* sm501_init_regs
+ *
+ * Setup core register values
+*/
+
+static void sm501_init_regs(struct sm501_devdata *sm,
+			    struct sm501_initdata *init)
+{
+	sm501_misc_control(sm->dev,
+			   init->misc_control.set,
+			   init->misc_control.mask);
+
+	sm501_init_reg(sm, SM501_MISC_TIMING, &init->misc_timing);
+	sm501_init_reg(sm, SM501_GPIO31_0_CONTROL, &init->gpio_low);
+	sm501_init_reg(sm, SM501_GPIO63_32_CONTROL, &init->gpio_high);
+
+	if (init->m1xclk) {
+		dev_info(sm->dev, "setting M1XCLK to %ld\n", init->m1xclk);
+		sm501_set_clock(sm->dev, SM501_CLOCK_M1XCLK, init->m1xclk);
+	}
+
+	if (init->mclk) {
+		dev_info(sm->dev, "setting MCLK to %ld\n", init->mclk);
+		sm501_set_clock(sm->dev, SM501_CLOCK_MCLK, init->mclk);
+	}
+
+}
+
+/* Check the PLL sources for the M1CLK and M1XCLK
+ *
+ * If the M1CLK and M1XCLKs are not sourced from the same PLL, then
+ * there is a risk (see errata AB-5) that the SM501 will cease proper
+ * function. If this happens, then it is likely the SM501 will
+ * hang the system.
+*/
+
+static int sm501_check_clocks(struct sm501_devdata *sm)
+{
+	unsigned long pwrmode = smc501_readl(sm->regs + SM501_CURRENT_CLOCK);
+	unsigned long msrc = (pwrmode & SM501_POWERMODE_M_SRC);
+	unsigned long m1src = (pwrmode & SM501_POWERMODE_M1_SRC);
+
+	return ((msrc == 0 && m1src != 0) || (msrc != 0 && m1src == 0));
+}
+
+static unsigned int sm501_mem_local[] = {
+	[0]	= 4*1024*1024,
+	[1]	= 8*1024*1024,
+	[2]	= 16*1024*1024,
+	[3]	= 32*1024*1024,
+	[4]	= 64*1024*1024,
+	[5]	= 2*1024*1024,
+};
+
+/* sm501_init_dev
+ *
+ * Common init code for an SM501
+*/
+
+static int sm501_init_dev(struct sm501_devdata *sm)
+{
+	struct sm501_initdata *idata;
+	struct sm501_platdata *pdata;
+	resource_size_t mem_avail;
+	unsigned long dramctrl;
+	unsigned long devid;
+	int ret;
+
+	mutex_init(&sm->clock_lock);
+	spin_lock_init(&sm->reg_lock);
+
+	INIT_LIST_HEAD(&sm->devices);
+
+	devid = smc501_readl(sm->regs + SM501_DEVICEID);
+
+	if ((devid & SM501_DEVICEID_IDMASK) != SM501_DEVICEID_SM501) {
+		dev_err(sm->dev, "incorrect device id %08lx\n", devid);
+		return -EINVAL;
+	}
+
+	/* disable irqs */
+	smc501_writel(0, sm->regs + SM501_IRQ_MASK);
+
+	dramctrl = smc501_readl(sm->regs + SM501_DRAM_CONTROL);
+	mem_avail = sm501_mem_local[(dramctrl >> 13) & 0x7];
+
+	dev_info(sm->dev, "SM501 At %p: Version %08lx, %ld Mb, IRQ %d\n",
+		 sm->regs, devid, (unsigned long)mem_avail >> 20, sm->irq);
+
+	sm->rev = devid & SM501_DEVICEID_REVMASK;
+
+	sm501_dump_gate(sm);
+
+	ret = device_create_file(sm->dev, &dev_attr_dbg_regs);
+	if (ret)
+		dev_err(sm->dev, "failed to create debug regs file\n");
+
+	sm501_dump_clk(sm);
+
+	/* check to see if we have some device initialisation */
+
+	pdata = sm->platdata;
+	idata = pdata ? pdata->init : NULL;
+
+	if (idata) {
+		sm501_init_regs(sm, idata);
+
+		if (idata->devices & SM501_USE_USB_HOST)
+			sm501_register_usbhost(sm, &mem_avail);
+		if (idata->devices & (SM501_USE_UART0 | SM501_USE_UART1))
+			sm501_register_uart(sm, idata->devices);
+		if (idata->devices & SM501_USE_GPIO)
+			sm501_register_gpio(sm);
+	}
+
+	if (pdata && pdata->gpio_i2c != NULL && pdata->gpio_i2c_nr > 0) {
+		if (!sm501_gpio_isregistered(sm))
+			dev_err(sm->dev, "no gpio available for i2c gpio.\n");
+		else
+			sm501_register_gpio_i2c(sm, pdata);
+	}
+
+	ret = sm501_check_clocks(sm);
+	if (ret) {
+		dev_err(sm->dev, "M1X and M clocks sourced from different "
+					"PLLs\n");
+		return -EINVAL;
+	}
+
+	/* always create a framebuffer */
+	sm501_register_display(sm, &mem_avail);
+
+	return 0;
+}
+
+static int sm501_plat_probe(struct platform_device *dev)
+{
+	struct sm501_devdata *sm;
+	int ret;
+
+	sm = kzalloc(sizeof(struct sm501_devdata), GFP_KERNEL);
+	if (sm == NULL) {
+		dev_err(&dev->dev, "no memory for device data\n");
+		ret = -ENOMEM;
+		goto err1;
+	}
+
+	sm->dev = &dev->dev;
+	sm->pdev_id = dev->id;
+	sm->platdata = dev_get_platdata(&dev->dev);
+
+	ret = platform_get_irq(dev, 0);
+	if (ret < 0) {
+		dev_err(&dev->dev, "failed to get irq resource\n");
+		goto err_res;
+	}
+	sm->irq = ret;
+
+	sm->io_res = platform_get_resource(dev, IORESOURCE_MEM, 1);
+	sm->mem_res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+
+	if (sm->io_res == NULL || sm->mem_res == NULL) {
+		dev_err(&dev->dev, "failed to get IO resource\n");
+		ret = -ENOENT;
+		goto err_res;
+	}
+
+	sm->regs_claim = request_mem_region(sm->io_res->start,
+					    0x100, "sm501");
+
+	if (sm->regs_claim == NULL) {
+		dev_err(&dev->dev, "cannot claim registers\n");
+		ret = -EBUSY;
+		goto err_res;
+	}
+
+	platform_set_drvdata(dev, sm);
+
+	sm->regs = ioremap(sm->io_res->start, resource_size(sm->io_res));
+
+	if (sm->regs == NULL) {
+		dev_err(&dev->dev, "cannot remap registers\n");
+		ret = -EIO;
+		goto err_claim;
+	}
+
+	return sm501_init_dev(sm);
+
+ err_claim:
+	release_resource(sm->regs_claim);
+	kfree(sm->regs_claim);
+ err_res:
+	kfree(sm);
+ err1:
+	return ret;
+
+}
+
+#ifdef CONFIG_PM
+
+/* power management support */
+
+static void sm501_set_power(struct sm501_devdata *sm, int on)
+{
+	struct sm501_platdata *pd = sm->platdata;
+
+	if (pd == NULL)
+		return;
+
+	if (pd->get_power) {
+		if (pd->get_power(sm->dev) == on) {
+			dev_dbg(sm->dev, "is already %d\n", on);
+			return;
+		}
+	}
+
+	if (pd->set_power) {
+		dev_dbg(sm->dev, "setting power to %d\n", on);
+
+		pd->set_power(sm->dev, on);
+		sm501_mdelay(sm, 10);
+	}
+}
+
+static int sm501_plat_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct sm501_devdata *sm = platform_get_drvdata(pdev);
+
+	sm->in_suspend = 1;
+	sm->pm_misc = smc501_readl(sm->regs + SM501_MISC_CONTROL);
+
+	sm501_dump_regs(sm);
+
+	if (sm->platdata) {
+		if (sm->platdata->flags & SM501_FLAG_SUSPEND_OFF)
+			sm501_set_power(sm, 0);
+	}
+
+	return 0;
+}
+
+static int sm501_plat_resume(struct platform_device *pdev)
+{
+	struct sm501_devdata *sm = platform_get_drvdata(pdev);
+
+	sm501_set_power(sm, 1);
+
+	sm501_dump_regs(sm);
+	sm501_dump_gate(sm);
+	sm501_dump_clk(sm);
+
+	/* check to see if we are in the same state as when suspended */
+
+	if (smc501_readl(sm->regs + SM501_MISC_CONTROL) != sm->pm_misc) {
+		dev_info(sm->dev, "SM501_MISC_CONTROL changed over sleep\n");
+		smc501_writel(sm->pm_misc, sm->regs + SM501_MISC_CONTROL);
+
+		/* our suspend causes the controller state to change,
+		 * either by something attempting setup, power loss,
+		 * or an external reset event on power change */
+
+		if (sm->platdata && sm->platdata->init) {
+			sm501_init_regs(sm, sm->platdata->init);
+		}
+	}
+
+	/* dump our state from resume */
+
+	sm501_dump_regs(sm);
+	sm501_dump_clk(sm);
+
+	sm->in_suspend = 0;
+
+	return 0;
+}
+#else
+#define sm501_plat_suspend NULL
+#define sm501_plat_resume NULL
+#endif
+
+/* Initialisation data for PCI devices */
+
+static struct sm501_initdata sm501_pci_initdata = {
+	.gpio_high	= {
+		.set	= 0x3F000000,		/* 24bit panel */
+		.mask	= 0x0,
+	},
+	.misc_timing	= {
+		.set	= 0x010100,		/* SDRAM timing */
+		.mask	= 0x1F1F00,
+	},
+	.misc_control	= {
+		.set	= SM501_MISC_PNL_24BIT,
+		.mask	= 0,
+	},
+
+	.devices	= SM501_USE_ALL,
+
+	/* Errata AB-3 says that 72MHz is the fastest available
+	 * for 33MHZ PCI with proper bus-mastering operation */
+
+	.mclk		= 72 * MHZ,
+	.m1xclk		= 144 * MHZ,
+};
+
+static struct sm501_platdata_fbsub sm501_pdata_fbsub = {
+	.flags		= (SM501FB_FLAG_USE_INIT_MODE |
+			   SM501FB_FLAG_USE_HWCURSOR |
+			   SM501FB_FLAG_USE_HWACCEL |
+			   SM501FB_FLAG_DISABLE_AT_EXIT),
+};
+
+static struct sm501_platdata_fb sm501_fb_pdata = {
+	.fb_route	= SM501_FB_OWN,
+	.fb_crt		= &sm501_pdata_fbsub,
+	.fb_pnl		= &sm501_pdata_fbsub,
+};
+
+static struct sm501_platdata sm501_pci_platdata = {
+	.init		= &sm501_pci_initdata,
+	.fb		= &sm501_fb_pdata,
+	.gpio_base	= -1,
+};
+
+static int sm501_pci_probe(struct pci_dev *dev,
+				     const struct pci_device_id *id)
+{
+	struct sm501_devdata *sm;
+	int err;
+
+	sm = kzalloc(sizeof(struct sm501_devdata), GFP_KERNEL);
+	if (sm == NULL) {
+		dev_err(&dev->dev, "no memory for device data\n");
+		err = -ENOMEM;
+		goto err1;
+	}
+
+	/* set a default set of platform data */
+	dev->dev.platform_data = sm->platdata = &sm501_pci_platdata;
+
+	/* set a hopefully unique id for our child platform devices */
+	sm->pdev_id = 32 + dev->devfn;
+
+	pci_set_drvdata(dev, sm);
+
+	err = pci_enable_device(dev);
+	if (err) {
+		dev_err(&dev->dev, "cannot enable device\n");
+		goto err2;
+	}
+
+	sm->dev = &dev->dev;
+	sm->irq = dev->irq;
+
+#ifdef __BIG_ENDIAN
+	/* if the system is big-endian, we most probably have a
+	 * translation in the IO layer making the PCI bus little endian
+	 * so make the framebuffer swapped pixels */
+
+	sm501_fb_pdata.flags |= SM501_FBPD_SWAP_FB_ENDIAN;
+#endif
+
+	/* check our resources */
+
+	if (!(pci_resource_flags(dev, 0) & IORESOURCE_MEM)) {
+		dev_err(&dev->dev, "region #0 is not memory?\n");
+		err = -EINVAL;
+		goto err3;
+	}
+
+	if (!(pci_resource_flags(dev, 1) & IORESOURCE_MEM)) {
+		dev_err(&dev->dev, "region #1 is not memory?\n");
+		err = -EINVAL;
+		goto err3;
+	}
+
+	/* make our resources ready for sharing */
+
+	sm->io_res = &dev->resource[1];
+	sm->mem_res = &dev->resource[0];
+
+	sm->regs_claim = request_mem_region(sm->io_res->start,
+					    0x100, "sm501");
+	if (sm->regs_claim == NULL) {
+		dev_err(&dev->dev, "cannot claim registers\n");
+		err= -EBUSY;
+		goto err3;
+	}
+
+	sm->regs = pci_ioremap_bar(dev, 1);
+
+	if (sm->regs == NULL) {
+		dev_err(&dev->dev, "cannot remap registers\n");
+		err = -EIO;
+		goto err4;
+	}
+
+	sm501_init_dev(sm);
+	return 0;
+
+ err4:
+	release_resource(sm->regs_claim);
+	kfree(sm->regs_claim);
+ err3:
+	pci_disable_device(dev);
+ err2:
+	kfree(sm);
+ err1:
+	return err;
+}
+
+static void sm501_remove_sub(struct sm501_devdata *sm,
+			     struct sm501_device *smdev)
+{
+	list_del(&smdev->list);
+	platform_device_unregister(&smdev->pdev);
+}
+
+static void sm501_dev_remove(struct sm501_devdata *sm)
+{
+	struct sm501_device *smdev, *tmp;
+
+	list_for_each_entry_safe(smdev, tmp, &sm->devices, list)
+		sm501_remove_sub(sm, smdev);
+
+	device_remove_file(sm->dev, &dev_attr_dbg_regs);
+
+	sm501_gpio_remove(sm);
+}
+
+static void sm501_pci_remove(struct pci_dev *dev)
+{
+	struct sm501_devdata *sm = pci_get_drvdata(dev);
+
+	sm501_dev_remove(sm);
+	iounmap(sm->regs);
+
+	release_resource(sm->regs_claim);
+	kfree(sm->regs_claim);
+
+	pci_disable_device(dev);
+}
+
+static int sm501_plat_remove(struct platform_device *dev)
+{
+	struct sm501_devdata *sm = platform_get_drvdata(dev);
+
+	sm501_dev_remove(sm);
+	iounmap(sm->regs);
+
+	release_resource(sm->regs_claim);
+	kfree(sm->regs_claim);
+
+	return 0;
+}
+
+static const struct pci_device_id sm501_pci_tbl[] = {
+	{ 0x126f, 0x0501, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+	{ 0, },
+};
+
+MODULE_DEVICE_TABLE(pci, sm501_pci_tbl);
+
+static struct pci_driver sm501_pci_driver = {
+	.name		= "sm501",
+	.id_table	= sm501_pci_tbl,
+	.probe		= sm501_pci_probe,
+	.remove		= sm501_pci_remove,
+};
+
+MODULE_ALIAS("platform:sm501");
+
+static const struct of_device_id of_sm501_match_tbl[] = {
+	{ .compatible = "smi,sm501", },
+	{ /* end */ }
+};
+
+static struct platform_driver sm501_plat_driver = {
+	.driver		= {
+		.name	= "sm501",
+		.of_match_table = of_sm501_match_tbl,
+	},
+	.probe		= sm501_plat_probe,
+	.remove		= sm501_plat_remove,
+	.suspend	= sm501_plat_suspend,
+	.resume		= sm501_plat_resume,
+};
+
+static int __init sm501_base_init(void)
+{
+	platform_driver_register(&sm501_plat_driver);
+	return pci_register_driver(&sm501_pci_driver);
+}
+
+static void __exit sm501_base_exit(void)
+{
+	platform_driver_unregister(&sm501_plat_driver);
+	pci_unregister_driver(&sm501_pci_driver);
+}
+
+module_init(sm501_base_init);
+module_exit(sm501_base_exit);
+
+MODULE_DESCRIPTION("SM501 Core Driver");
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>, Vincent Sanders");
+MODULE_LICENSE("GPL v2");