Initial import

1 files changed, 1308 insertions, 0 deletions

diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c
new file mode 100644
index 000000000..2d7fae94c
--- /dev/null
+++ b/drivers/mfd/stmpe.c
@@ -0,0 +1,1308 @@
+/*
+ * ST Microelectronics MFD: stmpe's driver
+ *
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License, version 2
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ */
+
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/export.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/pm.h>
+#include <linux/slab.h>
+#include <linux/mfd/core.h>
+#include <linux/delay.h>
+#include <linux/regulator/consumer.h>
+#include "stmpe.h"
+
+static int __stmpe_enable(struct stmpe *stmpe, unsigned int blocks)
+{
+	return stmpe->variant->enable(stmpe, blocks, true);
+}
+
+static int __stmpe_disable(struct stmpe *stmpe, unsigned int blocks)
+{
+	return stmpe->variant->enable(stmpe, blocks, false);
+}
+
+static int __stmpe_reg_read(struct stmpe *stmpe, u8 reg)
+{
+	int ret;
+
+	ret = stmpe->ci->read_byte(stmpe, reg);
+	if (ret < 0)
+		dev_err(stmpe->dev, "failed to read reg %#x: %d\n", reg, ret);
+
+	dev_vdbg(stmpe->dev, "rd: reg %#x => data %#x\n", reg, ret);
+
+	return ret;
+}
+
+static int __stmpe_reg_write(struct stmpe *stmpe, u8 reg, u8 val)
+{
+	int ret;
+
+	dev_vdbg(stmpe->dev, "wr: reg %#x <= %#x\n", reg, val);
+
+	ret = stmpe->ci->write_byte(stmpe, reg, val);
+	if (ret < 0)
+		dev_err(stmpe->dev, "failed to write reg %#x: %d\n", reg, ret);
+
+	return ret;
+}
+
+static int __stmpe_set_bits(struct stmpe *stmpe, u8 reg, u8 mask, u8 val)
+{
+	int ret;
+
+	ret = __stmpe_reg_read(stmpe, reg);
+	if (ret < 0)
+		return ret;
+
+	ret &= ~mask;
+	ret |= val;
+
+	return __stmpe_reg_write(stmpe, reg, ret);
+}
+
+static int __stmpe_block_read(struct stmpe *stmpe, u8 reg, u8 length,
+			      u8 *values)
+{
+	int ret;
+
+	ret = stmpe->ci->read_block(stmpe, reg, length, values);
+	if (ret < 0)
+		dev_err(stmpe->dev, "failed to read regs %#x: %d\n", reg, ret);
+
+	dev_vdbg(stmpe->dev, "rd: reg %#x (%d) => ret %#x\n", reg, length, ret);
+	stmpe_dump_bytes("stmpe rd: ", values, length);
+
+	return ret;
+}
+
+static int __stmpe_block_write(struct stmpe *stmpe, u8 reg, u8 length,
+			const u8 *values)
+{
+	int ret;
+
+	dev_vdbg(stmpe->dev, "wr: regs %#x (%d)\n", reg, length);
+	stmpe_dump_bytes("stmpe wr: ", values, length);
+
+	ret = stmpe->ci->write_block(stmpe, reg, length, values);
+	if (ret < 0)
+		dev_err(stmpe->dev, "failed to write regs %#x: %d\n", reg, ret);
+
+	return ret;
+}
+
+/**
+ * stmpe_enable - enable blocks on an STMPE device
+ * @stmpe:	Device to work on
+ * @blocks:	Mask of blocks (enum stmpe_block values) to enable
+ */
+int stmpe_enable(struct stmpe *stmpe, unsigned int blocks)
+{
+	int ret;
+
+	mutex_lock(&stmpe->lock);
+	ret = __stmpe_enable(stmpe, blocks);
+	mutex_unlock(&stmpe->lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(stmpe_enable);
+
+/**
+ * stmpe_disable - disable blocks on an STMPE device
+ * @stmpe:	Device to work on
+ * @blocks:	Mask of blocks (enum stmpe_block values) to enable
+ */
+int stmpe_disable(struct stmpe *stmpe, unsigned int blocks)
+{
+	int ret;
+
+	mutex_lock(&stmpe->lock);
+	ret = __stmpe_disable(stmpe, blocks);
+	mutex_unlock(&stmpe->lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(stmpe_disable);
+
+/**
+ * stmpe_reg_read() - read a single STMPE register
+ * @stmpe:	Device to read from
+ * @reg:	Register to read
+ */
+int stmpe_reg_read(struct stmpe *stmpe, u8 reg)
+{
+	int ret;
+
+	mutex_lock(&stmpe->lock);
+	ret = __stmpe_reg_read(stmpe, reg);
+	mutex_unlock(&stmpe->lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(stmpe_reg_read);
+
+/**
+ * stmpe_reg_write() - write a single STMPE register
+ * @stmpe:	Device to write to
+ * @reg:	Register to write
+ * @val:	Value to write
+ */
+int stmpe_reg_write(struct stmpe *stmpe, u8 reg, u8 val)
+{
+	int ret;
+
+	mutex_lock(&stmpe->lock);
+	ret = __stmpe_reg_write(stmpe, reg, val);
+	mutex_unlock(&stmpe->lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(stmpe_reg_write);
+
+/**
+ * stmpe_set_bits() - set the value of a bitfield in a STMPE register
+ * @stmpe:	Device to write to
+ * @reg:	Register to write
+ * @mask:	Mask of bits to set
+ * @val:	Value to set
+ */
+int stmpe_set_bits(struct stmpe *stmpe, u8 reg, u8 mask, u8 val)
+{
+	int ret;
+
+	mutex_lock(&stmpe->lock);
+	ret = __stmpe_set_bits(stmpe, reg, mask, val);
+	mutex_unlock(&stmpe->lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(stmpe_set_bits);
+
+/**
+ * stmpe_block_read() - read multiple STMPE registers
+ * @stmpe:	Device to read from
+ * @reg:	First register
+ * @length:	Number of registers
+ * @values:	Buffer to write to
+ */
+int stmpe_block_read(struct stmpe *stmpe, u8 reg, u8 length, u8 *values)
+{
+	int ret;
+
+	mutex_lock(&stmpe->lock);
+	ret = __stmpe_block_read(stmpe, reg, length, values);
+	mutex_unlock(&stmpe->lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(stmpe_block_read);
+
+/**
+ * stmpe_block_write() - write multiple STMPE registers
+ * @stmpe:	Device to write to
+ * @reg:	First register
+ * @length:	Number of registers
+ * @values:	Values to write
+ */
+int stmpe_block_write(struct stmpe *stmpe, u8 reg, u8 length,
+		      const u8 *values)
+{
+	int ret;
+
+	mutex_lock(&stmpe->lock);
+	ret = __stmpe_block_write(stmpe, reg, length, values);
+	mutex_unlock(&stmpe->lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(stmpe_block_write);
+
+/**
+ * stmpe_set_altfunc()- set the alternate function for STMPE pins
+ * @stmpe:	Device to configure
+ * @pins:	Bitmask of pins to affect
+ * @block:	block to enable alternate functions for
+ *
+ * @pins is assumed to have a bit set for each of the bits whose alternate
+ * function is to be changed, numbered according to the GPIOXY numbers.
+ *
+ * If the GPIO module is not enabled, this function automatically enables it in
+ * order to perform the change.
+ */
+int stmpe_set_altfunc(struct stmpe *stmpe, u32 pins, enum stmpe_block block)
+{
+	struct stmpe_variant_info *variant = stmpe->variant;
+	u8 regaddr = stmpe->regs[STMPE_IDX_GPAFR_U_MSB];
+	int af_bits = variant->af_bits;
+	int numregs = DIV_ROUND_UP(stmpe->num_gpios * af_bits, 8);
+	int mask = (1 << af_bits) - 1;
+	u8 regs[8];
+	int af, afperreg, ret;
+
+	if (!variant->get_altfunc)
+		return 0;
+
+	afperreg = 8 / af_bits;
+	mutex_lock(&stmpe->lock);
+
+	ret = __stmpe_enable(stmpe, STMPE_BLOCK_GPIO);
+	if (ret < 0)
+		goto out;
+
+	ret = __stmpe_block_read(stmpe, regaddr, numregs, regs);
+	if (ret < 0)
+		goto out;
+
+	af = variant->get_altfunc(stmpe, block);
+
+	while (pins) {
+		int pin = __ffs(pins);
+		int regoffset = numregs - (pin / afperreg) - 1;
+		int pos = (pin % afperreg) * (8 / afperreg);
+
+		regs[regoffset] &= ~(mask << pos);
+		regs[regoffset] |= af << pos;
+
+		pins &= ~(1 << pin);
+	}
+
+	ret = __stmpe_block_write(stmpe, regaddr, numregs, regs);
+
+out:
+	mutex_unlock(&stmpe->lock);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(stmpe_set_altfunc);
+
+/*
+ * GPIO (all variants)
+ */
+
+static struct resource stmpe_gpio_resources[] = {
+	/* Start and end filled dynamically */
+	{
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static const struct mfd_cell stmpe_gpio_cell = {
+	.name		= "stmpe-gpio",
+	.of_compatible	= "st,stmpe-gpio",
+	.resources	= stmpe_gpio_resources,
+	.num_resources	= ARRAY_SIZE(stmpe_gpio_resources),
+};
+
+static const struct mfd_cell stmpe_gpio_cell_noirq = {
+	.name		= "stmpe-gpio",
+	.of_compatible	= "st,stmpe-gpio",
+	/* gpio cell resources consist of an irq only so no resources here */
+};
+
+/*
+ * Keypad (1601, 2401, 2403)
+ */
+
+static struct resource stmpe_keypad_resources[] = {
+	{
+		.name	= "KEYPAD",
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.name	= "KEYPAD_OVER",
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static const struct mfd_cell stmpe_keypad_cell = {
+	.name		= "stmpe-keypad",
+	.of_compatible  = "st,stmpe-keypad",
+	.resources	= stmpe_keypad_resources,
+	.num_resources	= ARRAY_SIZE(stmpe_keypad_resources),
+};
+
+/*
+ * STMPE801
+ */
+static const u8 stmpe801_regs[] = {
+	[STMPE_IDX_CHIP_ID]	= STMPE801_REG_CHIP_ID,
+	[STMPE_IDX_ICR_LSB]	= STMPE801_REG_SYS_CTRL,
+	[STMPE_IDX_GPMR_LSB]	= STMPE801_REG_GPIO_MP_STA,
+	[STMPE_IDX_GPSR_LSB]	= STMPE801_REG_GPIO_SET_PIN,
+	[STMPE_IDX_GPCR_LSB]	= STMPE801_REG_GPIO_SET_PIN,
+	[STMPE_IDX_GPDR_LSB]	= STMPE801_REG_GPIO_DIR,
+	[STMPE_IDX_IEGPIOR_LSB] = STMPE801_REG_GPIO_INT_EN,
+	[STMPE_IDX_ISGPIOR_MSB] = STMPE801_REG_GPIO_INT_STA,
+
+};
+
+static struct stmpe_variant_block stmpe801_blocks[] = {
+	{
+		.cell	= &stmpe_gpio_cell,
+		.irq	= 0,
+		.block	= STMPE_BLOCK_GPIO,
+	},
+};
+
+static struct stmpe_variant_block stmpe801_blocks_noirq[] = {
+	{
+		.cell	= &stmpe_gpio_cell_noirq,
+		.block	= STMPE_BLOCK_GPIO,
+	},
+};
+
+static int stmpe801_enable(struct stmpe *stmpe, unsigned int blocks,
+			   bool enable)
+{
+	if (blocks & STMPE_BLOCK_GPIO)
+		return 0;
+	else
+		return -EINVAL;
+}
+
+static struct stmpe_variant_info stmpe801 = {
+	.name		= "stmpe801",
+	.id_val		= STMPE801_ID,
+	.id_mask	= 0xffff,
+	.num_gpios	= 8,
+	.regs		= stmpe801_regs,
+	.blocks		= stmpe801_blocks,
+	.num_blocks	= ARRAY_SIZE(stmpe801_blocks),
+	.num_irqs	= STMPE801_NR_INTERNAL_IRQS,
+	.enable		= stmpe801_enable,
+};
+
+static struct stmpe_variant_info stmpe801_noirq = {
+	.name		= "stmpe801",
+	.id_val		= STMPE801_ID,
+	.id_mask	= 0xffff,
+	.num_gpios	= 8,
+	.regs		= stmpe801_regs,
+	.blocks		= stmpe801_blocks_noirq,
+	.num_blocks	= ARRAY_SIZE(stmpe801_blocks_noirq),
+	.enable		= stmpe801_enable,
+};
+
+/*
+ * Touchscreen (STMPE811 or STMPE610)
+ */
+
+static struct resource stmpe_ts_resources[] = {
+	{
+		.name	= "TOUCH_DET",
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.name	= "FIFO_TH",
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static const struct mfd_cell stmpe_ts_cell = {
+	.name		= "stmpe-ts",
+	.of_compatible	= "st,stmpe-ts",
+	.resources	= stmpe_ts_resources,
+	.num_resources	= ARRAY_SIZE(stmpe_ts_resources),
+};
+
+/*
+ * STMPE811 or STMPE610
+ */
+
+static const u8 stmpe811_regs[] = {
+	[STMPE_IDX_CHIP_ID]	= STMPE811_REG_CHIP_ID,
+	[STMPE_IDX_ICR_LSB]	= STMPE811_REG_INT_CTRL,
+	[STMPE_IDX_IER_LSB]	= STMPE811_REG_INT_EN,
+	[STMPE_IDX_ISR_MSB]	= STMPE811_REG_INT_STA,
+	[STMPE_IDX_GPMR_LSB]	= STMPE811_REG_GPIO_MP_STA,
+	[STMPE_IDX_GPSR_LSB]	= STMPE811_REG_GPIO_SET_PIN,
+	[STMPE_IDX_GPCR_LSB]	= STMPE811_REG_GPIO_CLR_PIN,
+	[STMPE_IDX_GPDR_LSB]	= STMPE811_REG_GPIO_DIR,
+	[STMPE_IDX_GPRER_LSB]	= STMPE811_REG_GPIO_RE,
+	[STMPE_IDX_GPFER_LSB]	= STMPE811_REG_GPIO_FE,
+	[STMPE_IDX_GPAFR_U_MSB]	= STMPE811_REG_GPIO_AF,
+	[STMPE_IDX_IEGPIOR_LSB]	= STMPE811_REG_GPIO_INT_EN,
+	[STMPE_IDX_ISGPIOR_MSB]	= STMPE811_REG_GPIO_INT_STA,
+	[STMPE_IDX_GPEDR_MSB]	= STMPE811_REG_GPIO_ED,
+};
+
+static struct stmpe_variant_block stmpe811_blocks[] = {
+	{
+		.cell	= &stmpe_gpio_cell,
+		.irq	= STMPE811_IRQ_GPIOC,
+		.block	= STMPE_BLOCK_GPIO,
+	},
+	{
+		.cell	= &stmpe_ts_cell,
+		.irq	= STMPE811_IRQ_TOUCH_DET,
+		.block	= STMPE_BLOCK_TOUCHSCREEN,
+	},
+};
+
+static int stmpe811_enable(struct stmpe *stmpe, unsigned int blocks,
+			   bool enable)
+{
+	unsigned int mask = 0;
+
+	if (blocks & STMPE_BLOCK_GPIO)
+		mask |= STMPE811_SYS_CTRL2_GPIO_OFF;
+
+	if (blocks & STMPE_BLOCK_ADC)
+		mask |= STMPE811_SYS_CTRL2_ADC_OFF;
+
+	if (blocks & STMPE_BLOCK_TOUCHSCREEN)
+		mask |= STMPE811_SYS_CTRL2_TSC_OFF;
+
+	return __stmpe_set_bits(stmpe, STMPE811_REG_SYS_CTRL2, mask,
+				enable ? 0 : mask);
+}
+
+static int stmpe811_get_altfunc(struct stmpe *stmpe, enum stmpe_block block)
+{
+	/* 0 for touchscreen, 1 for GPIO */
+	return block != STMPE_BLOCK_TOUCHSCREEN;
+}
+
+static struct stmpe_variant_info stmpe811 = {
+	.name		= "stmpe811",
+	.id_val		= 0x0811,
+	.id_mask	= 0xffff,
+	.num_gpios	= 8,
+	.af_bits	= 1,
+	.regs		= stmpe811_regs,
+	.blocks		= stmpe811_blocks,
+	.num_blocks	= ARRAY_SIZE(stmpe811_blocks),
+	.num_irqs	= STMPE811_NR_INTERNAL_IRQS,
+	.enable		= stmpe811_enable,
+	.get_altfunc	= stmpe811_get_altfunc,
+};
+
+/* Similar to 811, except number of gpios */
+static struct stmpe_variant_info stmpe610 = {
+	.name		= "stmpe610",
+	.id_val		= 0x0811,
+	.id_mask	= 0xffff,
+	.num_gpios	= 6,
+	.af_bits	= 1,
+	.regs		= stmpe811_regs,
+	.blocks		= stmpe811_blocks,
+	.num_blocks	= ARRAY_SIZE(stmpe811_blocks),
+	.num_irqs	= STMPE811_NR_INTERNAL_IRQS,
+	.enable		= stmpe811_enable,
+	.get_altfunc	= stmpe811_get_altfunc,
+};
+
+/*
+ * STMPE1601
+ */
+
+static const u8 stmpe1601_regs[] = {
+	[STMPE_IDX_CHIP_ID]	= STMPE1601_REG_CHIP_ID,
+	[STMPE_IDX_ICR_LSB]	= STMPE1601_REG_ICR_LSB,
+	[STMPE_IDX_IER_LSB]	= STMPE1601_REG_IER_LSB,
+	[STMPE_IDX_ISR_MSB]	= STMPE1601_REG_ISR_MSB,
+	[STMPE_IDX_GPMR_LSB]	= STMPE1601_REG_GPIO_MP_LSB,
+	[STMPE_IDX_GPSR_LSB]	= STMPE1601_REG_GPIO_SET_LSB,
+	[STMPE_IDX_GPCR_LSB]	= STMPE1601_REG_GPIO_CLR_LSB,
+	[STMPE_IDX_GPDR_LSB]	= STMPE1601_REG_GPIO_SET_DIR_LSB,
+	[STMPE_IDX_GPRER_LSB]	= STMPE1601_REG_GPIO_RE_LSB,
+	[STMPE_IDX_GPFER_LSB]	= STMPE1601_REG_GPIO_FE_LSB,
+	[STMPE_IDX_GPPUR_LSB]	= STMPE1601_REG_GPIO_PU_LSB,
+	[STMPE_IDX_GPAFR_U_MSB]	= STMPE1601_REG_GPIO_AF_U_MSB,
+	[STMPE_IDX_IEGPIOR_LSB]	= STMPE1601_REG_INT_EN_GPIO_MASK_LSB,
+	[STMPE_IDX_ISGPIOR_MSB]	= STMPE1601_REG_INT_STA_GPIO_MSB,
+	[STMPE_IDX_GPEDR_MSB]	= STMPE1601_REG_GPIO_ED_MSB,
+};
+
+static struct stmpe_variant_block stmpe1601_blocks[] = {
+	{
+		.cell	= &stmpe_gpio_cell,
+		.irq	= STMPE1601_IRQ_GPIOC,
+		.block	= STMPE_BLOCK_GPIO,
+	},
+	{
+		.cell	= &stmpe_keypad_cell,
+		.irq	= STMPE1601_IRQ_KEYPAD,
+		.block	= STMPE_BLOCK_KEYPAD,
+	},
+};
+
+/* supported autosleep timeout delay (in msecs) */
+static const int stmpe_autosleep_delay[] = {
+	4, 16, 32, 64, 128, 256, 512, 1024,
+};
+
+static int stmpe_round_timeout(int timeout)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(stmpe_autosleep_delay); i++) {
+		if (stmpe_autosleep_delay[i] >= timeout)
+			return i;
+	}
+
+	/*
+	 * requests for delays longer than supported should not return the
+	 * longest supported delay
+	 */
+	return -EINVAL;
+}
+
+static int stmpe_autosleep(struct stmpe *stmpe, int autosleep_timeout)
+{
+	int ret;
+
+	if (!stmpe->variant->enable_autosleep)
+		return -ENOSYS;
+
+	mutex_lock(&stmpe->lock);
+	ret = stmpe->variant->enable_autosleep(stmpe, autosleep_timeout);
+	mutex_unlock(&stmpe->lock);
+
+	return ret;
+}
+
+/*
+ * Both stmpe 1601/2403 support same layout for autosleep
+ */
+static int stmpe1601_autosleep(struct stmpe *stmpe,
+		int autosleep_timeout)
+{
+	int ret, timeout;
+
+	/* choose the best available timeout */
+	timeout = stmpe_round_timeout(autosleep_timeout);
+	if (timeout < 0) {
+		dev_err(stmpe->dev, "invalid timeout\n");
+		return timeout;
+	}
+
+	ret = __stmpe_set_bits(stmpe, STMPE1601_REG_SYS_CTRL2,
+			STMPE1601_AUTOSLEEP_TIMEOUT_MASK,
+			timeout);
+	if (ret < 0)
+		return ret;
+
+	return __stmpe_set_bits(stmpe, STMPE1601_REG_SYS_CTRL2,
+			STPME1601_AUTOSLEEP_ENABLE,
+			STPME1601_AUTOSLEEP_ENABLE);
+}
+
+static int stmpe1601_enable(struct stmpe *stmpe, unsigned int blocks,
+			    bool enable)
+{
+	unsigned int mask = 0;
+
+	if (blocks & STMPE_BLOCK_GPIO)
+		mask |= STMPE1601_SYS_CTRL_ENABLE_GPIO;
+	else
+		mask &= ~STMPE1601_SYS_CTRL_ENABLE_GPIO;
+
+	if (blocks & STMPE_BLOCK_KEYPAD)
+		mask |= STMPE1601_SYS_CTRL_ENABLE_KPC;
+	else
+		mask &= ~STMPE1601_SYS_CTRL_ENABLE_KPC;
+
+	if (blocks & STMPE_BLOCK_PWM)
+		mask |= STMPE1601_SYS_CTRL_ENABLE_SPWM;
+	else
+		mask &= ~STMPE1601_SYS_CTRL_ENABLE_SPWM;
+
+	return __stmpe_set_bits(stmpe, STMPE1601_REG_SYS_CTRL, mask,
+				enable ? mask : 0);
+}
+
+static int stmpe1601_get_altfunc(struct stmpe *stmpe, enum stmpe_block block)
+{
+	switch (block) {
+	case STMPE_BLOCK_PWM:
+		return 2;
+
+	case STMPE_BLOCK_KEYPAD:
+		return 1;
+
+	case STMPE_BLOCK_GPIO:
+	default:
+		return 0;
+	}
+}
+
+static struct stmpe_variant_info stmpe1601 = {
+	.name		= "stmpe1601",
+	.id_val		= 0x0210,
+	.id_mask	= 0xfff0,	/* at least 0x0210 and 0x0212 */
+	.num_gpios	= 16,
+	.af_bits	= 2,
+	.regs		= stmpe1601_regs,
+	.blocks		= stmpe1601_blocks,
+	.num_blocks	= ARRAY_SIZE(stmpe1601_blocks),
+	.num_irqs	= STMPE1601_NR_INTERNAL_IRQS,
+	.enable		= stmpe1601_enable,
+	.get_altfunc	= stmpe1601_get_altfunc,
+	.enable_autosleep	= stmpe1601_autosleep,
+};
+
+/*
+ * STMPE1801
+ */
+static const u8 stmpe1801_regs[] = {
+	[STMPE_IDX_CHIP_ID]	= STMPE1801_REG_CHIP_ID,
+	[STMPE_IDX_ICR_LSB]	= STMPE1801_REG_INT_CTRL_LOW,
+	[STMPE_IDX_IER_LSB]	= STMPE1801_REG_INT_EN_MASK_LOW,
+	[STMPE_IDX_ISR_LSB]	= STMPE1801_REG_INT_STA_LOW,
+	[STMPE_IDX_GPMR_LSB]	= STMPE1801_REG_GPIO_MP_LOW,
+	[STMPE_IDX_GPSR_LSB]	= STMPE1801_REG_GPIO_SET_LOW,
+	[STMPE_IDX_GPCR_LSB]	= STMPE1801_REG_GPIO_CLR_LOW,
+	[STMPE_IDX_GPDR_LSB]	= STMPE1801_REG_GPIO_SET_DIR_LOW,
+	[STMPE_IDX_GPRER_LSB]	= STMPE1801_REG_GPIO_RE_LOW,
+	[STMPE_IDX_GPFER_LSB]	= STMPE1801_REG_GPIO_FE_LOW,
+	[STMPE_IDX_GPPUR_LSB]	= STMPE1801_REG_GPIO_PULL_UP_LOW,
+	[STMPE_IDX_IEGPIOR_LSB]	= STMPE1801_REG_INT_EN_GPIO_MASK_LOW,
+	[STMPE_IDX_ISGPIOR_LSB]	= STMPE1801_REG_INT_STA_GPIO_LOW,
+};
+
+static struct stmpe_variant_block stmpe1801_blocks[] = {
+	{
+		.cell	= &stmpe_gpio_cell,
+		.irq	= STMPE1801_IRQ_GPIOC,
+		.block	= STMPE_BLOCK_GPIO,
+	},
+	{
+		.cell	= &stmpe_keypad_cell,
+		.irq	= STMPE1801_IRQ_KEYPAD,
+		.block	= STMPE_BLOCK_KEYPAD,
+	},
+};
+
+static int stmpe1801_enable(struct stmpe *stmpe, unsigned int blocks,
+			    bool enable)
+{
+	unsigned int mask = 0;
+	if (blocks & STMPE_BLOCK_GPIO)
+		mask |= STMPE1801_MSK_INT_EN_GPIO;
+
+	if (blocks & STMPE_BLOCK_KEYPAD)
+		mask |= STMPE1801_MSK_INT_EN_KPC;
+
+	return __stmpe_set_bits(stmpe, STMPE1801_REG_INT_EN_MASK_LOW, mask,
+				enable ? mask : 0);
+}
+
+static int stmpe1801_reset(struct stmpe *stmpe)
+{
+	unsigned long timeout;
+	int ret = 0;
+
+	ret = __stmpe_set_bits(stmpe, STMPE1801_REG_SYS_CTRL,
+		STMPE1801_MSK_SYS_CTRL_RESET, STMPE1801_MSK_SYS_CTRL_RESET);
+	if (ret < 0)
+		return ret;
+
+	timeout = jiffies + msecs_to_jiffies(100);
+	while (time_before(jiffies, timeout)) {
+		ret = __stmpe_reg_read(stmpe, STMPE1801_REG_SYS_CTRL);
+		if (ret < 0)
+			return ret;
+		if (!(ret & STMPE1801_MSK_SYS_CTRL_RESET))
+			return 0;
+		usleep_range(100, 200);
+	}
+	return -EIO;
+}
+
+static struct stmpe_variant_info stmpe1801 = {
+	.name		= "stmpe1801",
+	.id_val		= STMPE1801_ID,
+	.id_mask	= 0xfff0,
+	.num_gpios	= 18,
+	.af_bits	= 0,
+	.regs		= stmpe1801_regs,
+	.blocks		= stmpe1801_blocks,
+	.num_blocks	= ARRAY_SIZE(stmpe1801_blocks),
+	.num_irqs	= STMPE1801_NR_INTERNAL_IRQS,
+	.enable		= stmpe1801_enable,
+	/* stmpe1801 do not have any gpio alternate function */
+	.get_altfunc	= NULL,
+};
+
+/*
+ * STMPE24XX
+ */
+
+static const u8 stmpe24xx_regs[] = {
+	[STMPE_IDX_CHIP_ID]	= STMPE24XX_REG_CHIP_ID,
+	[STMPE_IDX_ICR_LSB]	= STMPE24XX_REG_ICR_LSB,
+	[STMPE_IDX_IER_LSB]	= STMPE24XX_REG_IER_LSB,
+	[STMPE_IDX_ISR_MSB]	= STMPE24XX_REG_ISR_MSB,
+	[STMPE_IDX_GPMR_LSB]	= STMPE24XX_REG_GPMR_LSB,
+	[STMPE_IDX_GPSR_LSB]	= STMPE24XX_REG_GPSR_LSB,
+	[STMPE_IDX_GPCR_LSB]	= STMPE24XX_REG_GPCR_LSB,
+	[STMPE_IDX_GPDR_LSB]	= STMPE24XX_REG_GPDR_LSB,
+	[STMPE_IDX_GPRER_LSB]	= STMPE24XX_REG_GPRER_LSB,
+	[STMPE_IDX_GPFER_LSB]	= STMPE24XX_REG_GPFER_LSB,
+	[STMPE_IDX_GPPUR_LSB]	= STMPE24XX_REG_GPPUR_LSB,
+	[STMPE_IDX_GPPDR_LSB]	= STMPE24XX_REG_GPPDR_LSB,
+	[STMPE_IDX_GPAFR_U_MSB]	= STMPE24XX_REG_GPAFR_U_MSB,
+	[STMPE_IDX_IEGPIOR_LSB]	= STMPE24XX_REG_IEGPIOR_LSB,
+	[STMPE_IDX_ISGPIOR_MSB]	= STMPE24XX_REG_ISGPIOR_MSB,
+	[STMPE_IDX_GPEDR_MSB]	= STMPE24XX_REG_GPEDR_MSB,
+};
+
+static struct stmpe_variant_block stmpe24xx_blocks[] = {
+	{
+		.cell	= &stmpe_gpio_cell,
+		.irq	= STMPE24XX_IRQ_GPIOC,
+		.block	= STMPE_BLOCK_GPIO,
+	},
+	{
+		.cell	= &stmpe_keypad_cell,
+		.irq	= STMPE24XX_IRQ_KEYPAD,
+		.block	= STMPE_BLOCK_KEYPAD,
+	},
+};
+
+static int stmpe24xx_enable(struct stmpe *stmpe, unsigned int blocks,
+			    bool enable)
+{
+	unsigned int mask = 0;
+
+	if (blocks & STMPE_BLOCK_GPIO)
+		mask |= STMPE24XX_SYS_CTRL_ENABLE_GPIO;
+
+	if (blocks & STMPE_BLOCK_KEYPAD)
+		mask |= STMPE24XX_SYS_CTRL_ENABLE_KPC;
+
+	return __stmpe_set_bits(stmpe, STMPE24XX_REG_SYS_CTRL, mask,
+				enable ? mask : 0);
+}
+
+static int stmpe24xx_get_altfunc(struct stmpe *stmpe, enum stmpe_block block)
+{
+	switch (block) {
+	case STMPE_BLOCK_ROTATOR:
+		return 2;
+
+	case STMPE_BLOCK_KEYPAD:
+		return 1;
+
+	case STMPE_BLOCK_GPIO:
+	default:
+		return 0;
+	}
+}
+
+static struct stmpe_variant_info stmpe2401 = {
+	.name		= "stmpe2401",
+	.id_val		= 0x0101,
+	.id_mask	= 0xffff,
+	.num_gpios	= 24,
+	.af_bits	= 2,
+	.regs		= stmpe24xx_regs,
+	.blocks		= stmpe24xx_blocks,
+	.num_blocks	= ARRAY_SIZE(stmpe24xx_blocks),
+	.num_irqs	= STMPE24XX_NR_INTERNAL_IRQS,
+	.enable		= stmpe24xx_enable,
+	.get_altfunc	= stmpe24xx_get_altfunc,
+};
+
+static struct stmpe_variant_info stmpe2403 = {
+	.name		= "stmpe2403",
+	.id_val		= 0x0120,
+	.id_mask	= 0xffff,
+	.num_gpios	= 24,
+	.af_bits	= 2,
+	.regs		= stmpe24xx_regs,
+	.blocks		= stmpe24xx_blocks,
+	.num_blocks	= ARRAY_SIZE(stmpe24xx_blocks),
+	.num_irqs	= STMPE24XX_NR_INTERNAL_IRQS,
+	.enable		= stmpe24xx_enable,
+	.get_altfunc	= stmpe24xx_get_altfunc,
+	.enable_autosleep	= stmpe1601_autosleep, /* same as stmpe1601 */
+};
+
+static struct stmpe_variant_info *stmpe_variant_info[STMPE_NBR_PARTS] = {
+	[STMPE610]	= &stmpe610,
+	[STMPE801]	= &stmpe801,
+	[STMPE811]	= &stmpe811,
+	[STMPE1601]	= &stmpe1601,
+	[STMPE1801]	= &stmpe1801,
+	[STMPE2401]	= &stmpe2401,
+	[STMPE2403]	= &stmpe2403,
+};
+
+/*
+ * These devices can be connected in a 'no-irq' configuration - the irq pin
+ * is not used and the device cannot interrupt the CPU. Here we only list
+ * devices which support this configuration - the driver will fail probing
+ * for any devices not listed here which are configured in this way.
+ */
+static struct stmpe_variant_info *stmpe_noirq_variant_info[STMPE_NBR_PARTS] = {
+	[STMPE801]	= &stmpe801_noirq,
+};
+
+static irqreturn_t stmpe_irq(int irq, void *data)
+{
+	struct stmpe *stmpe = data;
+	struct stmpe_variant_info *variant = stmpe->variant;
+	int num = DIV_ROUND_UP(variant->num_irqs, 8);
+	u8 israddr;
+	u8 isr[3];
+	int ret;
+	int i;
+
+	if (variant->id_val == STMPE801_ID) {
+		int base = irq_create_mapping(stmpe->domain, 0);
+
+		handle_nested_irq(base);
+		return IRQ_HANDLED;
+	}
+
+	if (variant->id_val == STMPE1801_ID)
+		israddr = stmpe->regs[STMPE_IDX_ISR_LSB];
+	else
+		israddr = stmpe->regs[STMPE_IDX_ISR_MSB];
+
+	ret = stmpe_block_read(stmpe, israddr, num, isr);
+	if (ret < 0)
+		return IRQ_NONE;
+
+	for (i = 0; i < num; i++) {
+		int bank = num - i - 1;
+		u8 status = isr[i];
+		u8 clear;
+
+		status &= stmpe->ier[bank];
+		if (!status)
+			continue;
+
+		clear = status;
+		while (status) {
+			int bit = __ffs(status);
+			int line = bank * 8 + bit;
+			int nestedirq = irq_create_mapping(stmpe->domain, line);
+
+			handle_nested_irq(nestedirq);
+			status &= ~(1 << bit);
+		}
+
+		stmpe_reg_write(stmpe, israddr + i, clear);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static void stmpe_irq_lock(struct irq_data *data)
+{
+	struct stmpe *stmpe = irq_data_get_irq_chip_data(data);
+
+	mutex_lock(&stmpe->irq_lock);
+}
+
+static void stmpe_irq_sync_unlock(struct irq_data *data)
+{
+	struct stmpe *stmpe = irq_data_get_irq_chip_data(data);
+	struct stmpe_variant_info *variant = stmpe->variant;
+	int num = DIV_ROUND_UP(variant->num_irqs, 8);
+	int i;
+
+	for (i = 0; i < num; i++) {
+		u8 new = stmpe->ier[i];
+		u8 old = stmpe->oldier[i];
+
+		if (new == old)
+			continue;
+
+		stmpe->oldier[i] = new;
+		stmpe_reg_write(stmpe, stmpe->regs[STMPE_IDX_IER_LSB] - i, new);
+	}
+
+	mutex_unlock(&stmpe->irq_lock);
+}
+
+static void stmpe_irq_mask(struct irq_data *data)
+{
+	struct stmpe *stmpe = irq_data_get_irq_chip_data(data);
+	int offset = data->hwirq;
+	int regoffset = offset / 8;
+	int mask = 1 << (offset % 8);
+
+	stmpe->ier[regoffset] &= ~mask;
+}
+
+static void stmpe_irq_unmask(struct irq_data *data)
+{
+	struct stmpe *stmpe = irq_data_get_irq_chip_data(data);
+	int offset = data->hwirq;
+	int regoffset = offset / 8;
+	int mask = 1 << (offset % 8);
+
+	stmpe->ier[regoffset] |= mask;
+}
+
+static struct irq_chip stmpe_irq_chip = {
+	.name			= "stmpe",
+	.irq_bus_lock		= stmpe_irq_lock,
+	.irq_bus_sync_unlock	= stmpe_irq_sync_unlock,
+	.irq_mask		= stmpe_irq_mask,
+	.irq_unmask		= stmpe_irq_unmask,
+};
+
+static int stmpe_irq_map(struct irq_domain *d, unsigned int virq,
+                                irq_hw_number_t hwirq)
+{
+	struct stmpe *stmpe = d->host_data;
+	struct irq_chip *chip = NULL;
+
+	if (stmpe->variant->id_val != STMPE801_ID)
+		chip = &stmpe_irq_chip;
+
+	irq_set_chip_data(virq, stmpe);
+	irq_set_chip_and_handler(virq, chip, handle_edge_irq);
+	irq_set_nested_thread(virq, 1);
+#ifdef CONFIG_ARM
+	set_irq_flags(virq, IRQF_VALID);
+#else
+	irq_set_noprobe(virq);
+#endif
+
+	return 0;
+}
+
+static void stmpe_irq_unmap(struct irq_domain *d, unsigned int virq)
+{
+#ifdef CONFIG_ARM
+		set_irq_flags(virq, 0);
+#endif
+		irq_set_chip_and_handler(virq, NULL, NULL);
+		irq_set_chip_data(virq, NULL);
+}
+
+static struct irq_domain_ops stmpe_irq_ops = {
+        .map    = stmpe_irq_map,
+        .unmap  = stmpe_irq_unmap,
+        .xlate  = irq_domain_xlate_twocell,
+};
+
+static int stmpe_irq_init(struct stmpe *stmpe, struct device_node *np)
+{
+	int base = 0;
+	int num_irqs = stmpe->variant->num_irqs;
+
+	stmpe->domain = irq_domain_add_simple(np, num_irqs, base,
+					      &stmpe_irq_ops, stmpe);
+	if (!stmpe->domain) {
+		dev_err(stmpe->dev, "Failed to create irqdomain\n");
+		return -ENOSYS;
+	}
+
+	return 0;
+}
+
+static int stmpe_chip_init(struct stmpe *stmpe)
+{
+	unsigned int irq_trigger = stmpe->pdata->irq_trigger;
+	int autosleep_timeout = stmpe->pdata->autosleep_timeout;
+	struct stmpe_variant_info *variant = stmpe->variant;
+	u8 icr = 0;
+	unsigned int id;
+	u8 data[2];
+	int ret;
+
+	ret = stmpe_block_read(stmpe, stmpe->regs[STMPE_IDX_CHIP_ID],
+			       ARRAY_SIZE(data), data);
+	if (ret < 0)
+		return ret;
+
+	id = (data[0] << 8) | data[1];
+	if ((id & variant->id_mask) != variant->id_val) {
+		dev_err(stmpe->dev, "unknown chip id: %#x\n", id);
+		return -EINVAL;
+	}
+
+	dev_info(stmpe->dev, "%s detected, chip id: %#x\n", variant->name, id);
+
+	/* Disable all modules -- subdrivers should enable what they need. */
+	ret = stmpe_disable(stmpe, ~0);
+	if (ret)
+		return ret;
+
+	if (id == STMPE1801_ID)	{
+		ret =  stmpe1801_reset(stmpe);
+		if (ret < 0)
+			return ret;
+	}
+
+	if (stmpe->irq >= 0) {
+		if (id == STMPE801_ID)
+			icr = STMPE801_REG_SYS_CTRL_INT_EN;
+		else
+			icr = STMPE_ICR_LSB_GIM;
+
+		/* STMPE801 doesn't support Edge interrupts */
+		if (id != STMPE801_ID) {
+			if (irq_trigger == IRQF_TRIGGER_FALLING ||
+					irq_trigger == IRQF_TRIGGER_RISING)
+				icr |= STMPE_ICR_LSB_EDGE;
+		}
+
+		if (irq_trigger == IRQF_TRIGGER_RISING ||
+				irq_trigger == IRQF_TRIGGER_HIGH) {
+			if (id == STMPE801_ID)
+				icr |= STMPE801_REG_SYS_CTRL_INT_HI;
+			else
+				icr |= STMPE_ICR_LSB_HIGH;
+		}
+	}
+
+	if (stmpe->pdata->autosleep) {
+		ret = stmpe_autosleep(stmpe, autosleep_timeout);
+		if (ret)
+			return ret;
+	}
+
+	return stmpe_reg_write(stmpe, stmpe->regs[STMPE_IDX_ICR_LSB], icr);
+}
+
+static int stmpe_add_device(struct stmpe *stmpe, const struct mfd_cell *cell)
+{
+	return mfd_add_devices(stmpe->dev, stmpe->pdata->id, cell, 1,
+			       NULL, 0, stmpe->domain);
+}
+
+static int stmpe_devices_init(struct stmpe *stmpe)
+{
+	struct stmpe_variant_info *variant = stmpe->variant;
+	unsigned int platform_blocks = stmpe->pdata->blocks;
+	int ret = -EINVAL;
+	int i, j;
+
+	for (i = 0; i < variant->num_blocks; i++) {
+		struct stmpe_variant_block *block = &variant->blocks[i];
+
+		if (!(platform_blocks & block->block))
+			continue;
+
+		for (j = 0; j < block->cell->num_resources; j++) {
+			struct resource *res =
+				(struct resource *) &block->cell->resources[j];
+
+			/* Dynamically fill in a variant's IRQ. */
+			if (res->flags & IORESOURCE_IRQ)
+				res->start = res->end = block->irq + j;
+		}
+
+		platform_blocks &= ~block->block;
+		ret = stmpe_add_device(stmpe, block->cell);
+		if (ret)
+			return ret;
+	}
+
+	if (platform_blocks)
+		dev_warn(stmpe->dev,
+			 "platform wants blocks (%#x) not present on variant",
+			 platform_blocks);
+
+	return ret;
+}
+
+static void stmpe_of_probe(struct stmpe_platform_data *pdata,
+			   struct device_node *np)
+{
+	struct device_node *child;
+
+	pdata->id = of_alias_get_id(np, "stmpe-i2c");
+	if (pdata->id < 0)
+		pdata->id = -1;
+
+	pdata->irq_gpio = of_get_named_gpio_flags(np, "irq-gpio", 0,
+				&pdata->irq_trigger);
+	if (gpio_is_valid(pdata->irq_gpio))
+		pdata->irq_over_gpio = 1;
+	else
+		pdata->irq_trigger = IRQF_TRIGGER_NONE;
+
+	of_property_read_u32(np, "st,autosleep-timeout",
+			&pdata->autosleep_timeout);
+
+	pdata->autosleep = (pdata->autosleep_timeout) ? true : false;
+
+	for_each_child_of_node(np, child) {
+		if (!strcmp(child->name, "stmpe_gpio")) {
+			pdata->blocks |= STMPE_BLOCK_GPIO;
+		} else if (!strcmp(child->name, "stmpe_keypad")) {
+			pdata->blocks |= STMPE_BLOCK_KEYPAD;
+		} else if (!strcmp(child->name, "stmpe_touchscreen")) {
+			pdata->blocks |= STMPE_BLOCK_TOUCHSCREEN;
+		} else if (!strcmp(child->name, "stmpe_adc")) {
+			pdata->blocks |= STMPE_BLOCK_ADC;
+		} else if (!strcmp(child->name, "stmpe_pwm")) {
+			pdata->blocks |= STMPE_BLOCK_PWM;
+		} else if (!strcmp(child->name, "stmpe_rotator")) {
+			pdata->blocks |= STMPE_BLOCK_ROTATOR;
+		}
+	}
+}
+
+/* Called from client specific probe routines */
+int stmpe_probe(struct stmpe_client_info *ci, enum stmpe_partnum partnum)
+{
+	struct stmpe_platform_data *pdata = dev_get_platdata(ci->dev);
+	struct device_node *np = ci->dev->of_node;
+	struct stmpe *stmpe;
+	int ret;
+
+	if (!pdata) {
+		if (!np)
+			return -EINVAL;
+
+		pdata = devm_kzalloc(ci->dev, sizeof(*pdata), GFP_KERNEL);
+		if (!pdata)
+			return -ENOMEM;
+
+		stmpe_of_probe(pdata, np);
+
+		if (of_find_property(np, "interrupts", NULL) == NULL)
+			ci->irq = -1;
+	}
+
+	stmpe = devm_kzalloc(ci->dev, sizeof(struct stmpe), GFP_KERNEL);
+	if (!stmpe)
+		return -ENOMEM;
+
+	mutex_init(&stmpe->irq_lock);
+	mutex_init(&stmpe->lock);
+
+	stmpe->dev = ci->dev;
+	stmpe->client = ci->client;
+	stmpe->pdata = pdata;
+	stmpe->ci = ci;
+	stmpe->partnum = partnum;
+	stmpe->variant = stmpe_variant_info[partnum];
+	stmpe->regs = stmpe->variant->regs;
+	stmpe->num_gpios = stmpe->variant->num_gpios;
+	stmpe->vcc = devm_regulator_get_optional(ci->dev, "vcc");
+	if (!IS_ERR(stmpe->vcc)) {
+		ret = regulator_enable(stmpe->vcc);
+		if (ret)
+			dev_warn(ci->dev, "failed to enable VCC supply\n");
+	}
+	stmpe->vio = devm_regulator_get_optional(ci->dev, "vio");
+	if (!IS_ERR(stmpe->vio)) {
+		ret = regulator_enable(stmpe->vio);
+		if (ret)
+			dev_warn(ci->dev, "failed to enable VIO supply\n");
+	}
+	dev_set_drvdata(stmpe->dev, stmpe);
+
+	if (ci->init)
+		ci->init(stmpe);
+
+	if (pdata->irq_over_gpio) {
+		ret = devm_gpio_request_one(ci->dev, pdata->irq_gpio,
+				GPIOF_DIR_IN, "stmpe");
+		if (ret) {
+			dev_err(stmpe->dev, "failed to request IRQ GPIO: %d\n",
+					ret);
+			return ret;
+		}
+
+		stmpe->irq = gpio_to_irq(pdata->irq_gpio);
+	} else {
+		stmpe->irq = ci->irq;
+	}
+
+	if (stmpe->irq < 0) {
+		/* use alternate variant info for no-irq mode, if supported */
+		dev_info(stmpe->dev,
+			"%s configured in no-irq mode by platform data\n",
+			stmpe->variant->name);
+		if (!stmpe_noirq_variant_info[stmpe->partnum]) {
+			dev_err(stmpe->dev,
+				"%s does not support no-irq mode!\n",
+				stmpe->variant->name);
+			return -ENODEV;
+		}
+		stmpe->variant = stmpe_noirq_variant_info[stmpe->partnum];
+	} else if (pdata->irq_trigger == IRQF_TRIGGER_NONE) {
+		pdata->irq_trigger = irq_get_trigger_type(stmpe->irq);
+	}
+
+	ret = stmpe_chip_init(stmpe);
+	if (ret)
+		return ret;
+
+	if (stmpe->irq >= 0) {
+		ret = stmpe_irq_init(stmpe, np);
+		if (ret)
+			return ret;
+
+		ret = devm_request_threaded_irq(ci->dev, stmpe->irq, NULL,
+				stmpe_irq, pdata->irq_trigger | IRQF_ONESHOT,
+				"stmpe", stmpe);
+		if (ret) {
+			dev_err(stmpe->dev, "failed to request IRQ: %d\n",
+					ret);
+			return ret;
+		}
+	}
+
+	ret = stmpe_devices_init(stmpe);
+	if (!ret)
+		return 0;
+
+	dev_err(stmpe->dev, "failed to add children\n");
+	mfd_remove_devices(stmpe->dev);
+
+	return ret;
+}
+
+int stmpe_remove(struct stmpe *stmpe)
+{
+	if (!IS_ERR(stmpe->vio))
+		regulator_disable(stmpe->vio);
+	if (!IS_ERR(stmpe->vcc))
+		regulator_disable(stmpe->vcc);
+
+	mfd_remove_devices(stmpe->dev);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int stmpe_suspend(struct device *dev)
+{
+	struct stmpe *stmpe = dev_get_drvdata(dev);
+
+	if (stmpe->irq >= 0 && device_may_wakeup(dev))
+		enable_irq_wake(stmpe->irq);
+
+	return 0;
+}
+
+static int stmpe_resume(struct device *dev)
+{
+	struct stmpe *stmpe = dev_get_drvdata(dev);
+
+	if (stmpe->irq >= 0 && device_may_wakeup(dev))
+		disable_irq_wake(stmpe->irq);
+
+	return 0;
+}
+
+const struct dev_pm_ops stmpe_dev_pm_ops = {
+	.suspend	= stmpe_suspend,
+	.resume		= stmpe_resume,
+};
+#endif