Initial import

1 files changed, 486 insertions, 0 deletions

diff --git a/drivers/mfd/twl6030-irq.c b/drivers/mfd/twl6030-irq.c
new file mode 100644
index 000000000..2807e1a95
--- /dev/null
+++ b/drivers/mfd/twl6030-irq.c
@@ -0,0 +1,486 @@
+/*
+ * twl6030-irq.c - TWL6030 irq support
+ *
+ * Copyright (C) 2005-2009 Texas Instruments, Inc.
+ *
+ * Modifications to defer interrupt handling to a kernel thread:
+ * Copyright (C) 2006 MontaVista Software, Inc.
+ *
+ * Based on tlv320aic23.c:
+ * Copyright (c) by Kai Svahn <kai.svahn@nokia.com>
+ *
+ * Code cleanup and modifications to IRQ handler.
+ * by syed khasim <x0khasim@ti.com>
+ *
+ * TWL6030 specific code and IRQ handling changes by
+ * Jagadeesh Bhaskar Pakaravoor <j-pakaravoor@ti.com>
+ * Balaji T K <balajitk@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include <linux/export.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kthread.h>
+#include <linux/i2c/twl.h>
+#include <linux/platform_device.h>
+#include <linux/suspend.h>
+#include <linux/of.h>
+#include <linux/irqdomain.h>
+#include <linux/of_device.h>
+
+#include "twl-core.h"
+
+/*
+ * TWL6030 (unlike its predecessors, which had two level interrupt handling)
+ * three interrupt registers INT_STS_A, INT_STS_B and INT_STS_C.
+ * It exposes status bits saying who has raised an interrupt. There are
+ * three mask registers that corresponds to these status registers, that
+ * enables/disables these interrupts.
+ *
+ * We set up IRQs starting at a platform-specified base. An interrupt map table,
+ * specifies mapping between interrupt number and the associated module.
+ */
+#define TWL6030_NR_IRQS    20
+
+static int twl6030_interrupt_mapping[24] = {
+	PWR_INTR_OFFSET,	/* Bit 0	PWRON			*/
+	PWR_INTR_OFFSET,	/* Bit 1	RPWRON			*/
+	PWR_INTR_OFFSET,	/* Bit 2	BAT_VLOW		*/
+	RTC_INTR_OFFSET,	/* Bit 3	RTC_ALARM		*/
+	RTC_INTR_OFFSET,	/* Bit 4	RTC_PERIOD		*/
+	HOTDIE_INTR_OFFSET,	/* Bit 5	HOT_DIE			*/
+	SMPSLDO_INTR_OFFSET,	/* Bit 6	VXXX_SHORT		*/
+	SMPSLDO_INTR_OFFSET,	/* Bit 7	VMMC_SHORT		*/
+
+	SMPSLDO_INTR_OFFSET,	/* Bit 8	VUSIM_SHORT		*/
+	BATDETECT_INTR_OFFSET,	/* Bit 9	BAT			*/
+	SIMDETECT_INTR_OFFSET,	/* Bit 10	SIM			*/
+	MMCDETECT_INTR_OFFSET,	/* Bit 11	MMC			*/
+	RSV_INTR_OFFSET,	/* Bit 12	Reserved		*/
+	MADC_INTR_OFFSET,	/* Bit 13	GPADC_RT_EOC		*/
+	MADC_INTR_OFFSET,	/* Bit 14	GPADC_SW_EOC		*/
+	GASGAUGE_INTR_OFFSET,	/* Bit 15	CC_AUTOCAL		*/
+
+	USBOTG_INTR_OFFSET,	/* Bit 16	ID_WKUP			*/
+	USBOTG_INTR_OFFSET,	/* Bit 17	VBUS_WKUP		*/
+	USBOTG_INTR_OFFSET,	/* Bit 18	ID			*/
+	USB_PRES_INTR_OFFSET,	/* Bit 19	VBUS			*/
+	CHARGER_INTR_OFFSET,	/* Bit 20	CHRG_CTRL		*/
+	CHARGERFAULT_INTR_OFFSET,	/* Bit 21	EXT_CHRG	*/
+	CHARGERFAULT_INTR_OFFSET,	/* Bit 22	INT_CHRG	*/
+	RSV_INTR_OFFSET,	/* Bit 23	Reserved		*/
+};
+
+static int twl6032_interrupt_mapping[24] = {
+	PWR_INTR_OFFSET,	/* Bit 0	PWRON			*/
+	PWR_INTR_OFFSET,	/* Bit 1	RPWRON			*/
+	PWR_INTR_OFFSET,	/* Bit 2	SYS_VLOW		*/
+	RTC_INTR_OFFSET,	/* Bit 3	RTC_ALARM		*/
+	RTC_INTR_OFFSET,	/* Bit 4	RTC_PERIOD		*/
+	HOTDIE_INTR_OFFSET,	/* Bit 5	HOT_DIE			*/
+	SMPSLDO_INTR_OFFSET,	/* Bit 6	VXXX_SHORT		*/
+	PWR_INTR_OFFSET,	/* Bit 7	SPDURATION		*/
+
+	PWR_INTR_OFFSET,	/* Bit 8	WATCHDOG		*/
+	BATDETECT_INTR_OFFSET,	/* Bit 9	BAT			*/
+	SIMDETECT_INTR_OFFSET,	/* Bit 10	SIM			*/
+	MMCDETECT_INTR_OFFSET,	/* Bit 11	MMC			*/
+	MADC_INTR_OFFSET,	/* Bit 12	GPADC_RT_EOC		*/
+	MADC_INTR_OFFSET,	/* Bit 13	GPADC_SW_EOC		*/
+	GASGAUGE_INTR_OFFSET,	/* Bit 14	CC_EOC			*/
+	GASGAUGE_INTR_OFFSET,	/* Bit 15	CC_AUTOCAL		*/
+
+	USBOTG_INTR_OFFSET,	/* Bit 16	ID_WKUP			*/
+	USBOTG_INTR_OFFSET,	/* Bit 17	VBUS_WKUP		*/
+	USBOTG_INTR_OFFSET,	/* Bit 18	ID			*/
+	USB_PRES_INTR_OFFSET,	/* Bit 19	VBUS			*/
+	CHARGER_INTR_OFFSET,	/* Bit 20	CHRG_CTRL		*/
+	CHARGERFAULT_INTR_OFFSET,	/* Bit 21	EXT_CHRG	*/
+	CHARGERFAULT_INTR_OFFSET,	/* Bit 22	INT_CHRG	*/
+	RSV_INTR_OFFSET,	/* Bit 23	Reserved		*/
+};
+
+/*----------------------------------------------------------------------*/
+
+struct twl6030_irq {
+	unsigned int		irq_base;
+	int			twl_irq;
+	bool			irq_wake_enabled;
+	atomic_t		wakeirqs;
+	struct notifier_block	pm_nb;
+	struct irq_chip		irq_chip;
+	struct irq_domain	*irq_domain;
+	const int		*irq_mapping_tbl;
+};
+
+static struct twl6030_irq *twl6030_irq;
+
+static int twl6030_irq_pm_notifier(struct notifier_block *notifier,
+				   unsigned long pm_event, void *unused)
+{
+	int chained_wakeups;
+	struct twl6030_irq *pdata = container_of(notifier, struct twl6030_irq,
+						  pm_nb);
+
+	switch (pm_event) {
+	case PM_SUSPEND_PREPARE:
+		chained_wakeups = atomic_read(&pdata->wakeirqs);
+
+		if (chained_wakeups && !pdata->irq_wake_enabled) {
+			if (enable_irq_wake(pdata->twl_irq))
+				pr_err("twl6030 IRQ wake enable failed\n");
+			else
+				pdata->irq_wake_enabled = true;
+		} else if (!chained_wakeups && pdata->irq_wake_enabled) {
+			disable_irq_wake(pdata->twl_irq);
+			pdata->irq_wake_enabled = false;
+		}
+
+		disable_irq(pdata->twl_irq);
+		break;
+
+	case PM_POST_SUSPEND:
+		enable_irq(pdata->twl_irq);
+		break;
+
+	default:
+		break;
+	}
+
+	return NOTIFY_DONE;
+}
+
+/*
+* Threaded irq handler for the twl6030 interrupt.
+* We query the interrupt controller in the twl6030 to determine
+* which module is generating the interrupt request and call
+* handle_nested_irq for that module.
+*/
+static irqreturn_t twl6030_irq_thread(int irq, void *data)
+{
+	int i, ret;
+	union {
+		u8 bytes[4];
+		__le32 int_sts;
+	} sts;
+	u32 int_sts; /* sts.int_sts converted to CPU endianness */
+	struct twl6030_irq *pdata = data;
+
+	/* read INT_STS_A, B and C in one shot using a burst read */
+	ret = twl_i2c_read(TWL_MODULE_PIH, sts.bytes, REG_INT_STS_A, 3);
+	if (ret) {
+		pr_warn("twl6030_irq: I2C error %d reading PIH ISR\n", ret);
+		return IRQ_HANDLED;
+	}
+
+	sts.bytes[3] = 0; /* Only 24 bits are valid*/
+
+	/*
+	 * Since VBUS status bit is not reliable for VBUS disconnect
+	 * use CHARGER VBUS detection status bit instead.
+	 */
+	if (sts.bytes[2] & 0x10)
+		sts.bytes[2] |= 0x08;
+
+	int_sts = le32_to_cpu(sts.int_sts);
+	for (i = 0; int_sts; int_sts >>= 1, i++)
+		if (int_sts & 0x1) {
+			int module_irq =
+				irq_find_mapping(pdata->irq_domain,
+						 pdata->irq_mapping_tbl[i]);
+			if (module_irq)
+				handle_nested_irq(module_irq);
+			else
+				pr_err("twl6030_irq: Unmapped PIH ISR %u detected\n",
+				       i);
+			pr_debug("twl6030_irq: PIH ISR %u, virq%u\n",
+				 i, module_irq);
+		}
+
+	/*
+	 * NOTE:
+	 * Simulation confirms that documentation is wrong w.r.t the
+	 * interrupt status clear operation. A single *byte* write to
+	 * any one of STS_A to STS_C register results in all three
+	 * STS registers being reset. Since it does not matter which
+	 * value is written, all three registers are cleared on a
+	 * single byte write, so we just use 0x0 to clear.
+	 */
+	ret = twl_i2c_write_u8(TWL_MODULE_PIH, 0x00, REG_INT_STS_A);
+	if (ret)
+		pr_warn("twl6030_irq: I2C error in clearing PIH ISR\n");
+
+	return IRQ_HANDLED;
+}
+
+/*----------------------------------------------------------------------*/
+
+static int twl6030_irq_set_wake(struct irq_data *d, unsigned int on)
+{
+	struct twl6030_irq *pdata = irq_get_chip_data(d->irq);
+
+	if (on)
+		atomic_inc(&pdata->wakeirqs);
+	else
+		atomic_dec(&pdata->wakeirqs);
+
+	return 0;
+}
+
+int twl6030_interrupt_unmask(u8 bit_mask, u8 offset)
+{
+	int ret;
+	u8 unmask_value;
+
+	ret = twl_i2c_read_u8(TWL_MODULE_PIH, &unmask_value,
+			REG_INT_STS_A + offset);
+	unmask_value &= (~(bit_mask));
+	ret |= twl_i2c_write_u8(TWL_MODULE_PIH, unmask_value,
+			REG_INT_STS_A + offset); /* unmask INT_MSK_A/B/C */
+	return ret;
+}
+EXPORT_SYMBOL(twl6030_interrupt_unmask);
+
+int twl6030_interrupt_mask(u8 bit_mask, u8 offset)
+{
+	int ret;
+	u8 mask_value;
+
+	ret = twl_i2c_read_u8(TWL_MODULE_PIH, &mask_value,
+			REG_INT_STS_A + offset);
+	mask_value |= (bit_mask);
+	ret |= twl_i2c_write_u8(TWL_MODULE_PIH, mask_value,
+			REG_INT_STS_A + offset); /* mask INT_MSK_A/B/C */
+	return ret;
+}
+EXPORT_SYMBOL(twl6030_interrupt_mask);
+
+int twl6030_mmc_card_detect_config(void)
+{
+	int ret;
+	u8 reg_val = 0;
+
+	/* Unmasking the Card detect Interrupt line for MMC1 from Phoenix */
+	twl6030_interrupt_unmask(TWL6030_MMCDETECT_INT_MASK,
+						REG_INT_MSK_LINE_B);
+	twl6030_interrupt_unmask(TWL6030_MMCDETECT_INT_MASK,
+						REG_INT_MSK_STS_B);
+	/*
+	 * Initially Configuring MMC_CTRL for receiving interrupts &
+	 * Card status on TWL6030 for MMC1
+	 */
+	ret = twl_i2c_read_u8(TWL6030_MODULE_ID0, &reg_val, TWL6030_MMCCTRL);
+	if (ret < 0) {
+		pr_err("twl6030: Failed to read MMCCTRL, error %d\n", ret);
+		return ret;
+	}
+	reg_val &= ~VMMC_AUTO_OFF;
+	reg_val |= SW_FC;
+	ret = twl_i2c_write_u8(TWL6030_MODULE_ID0, reg_val, TWL6030_MMCCTRL);
+	if (ret < 0) {
+		pr_err("twl6030: Failed to write MMCCTRL, error %d\n", ret);
+		return ret;
+	}
+
+	/* Configuring PullUp-PullDown register */
+	ret = twl_i2c_read_u8(TWL6030_MODULE_ID0, &reg_val,
+						TWL6030_CFG_INPUT_PUPD3);
+	if (ret < 0) {
+		pr_err("twl6030: Failed to read CFG_INPUT_PUPD3, error %d\n",
+									ret);
+		return ret;
+	}
+	reg_val &= ~(MMC_PU | MMC_PD);
+	ret = twl_i2c_write_u8(TWL6030_MODULE_ID0, reg_val,
+						TWL6030_CFG_INPUT_PUPD3);
+	if (ret < 0) {
+		pr_err("twl6030: Failed to write CFG_INPUT_PUPD3, error %d\n",
+									ret);
+		return ret;
+	}
+
+	return irq_find_mapping(twl6030_irq->irq_domain,
+				 MMCDETECT_INTR_OFFSET);
+}
+EXPORT_SYMBOL(twl6030_mmc_card_detect_config);
+
+int twl6030_mmc_card_detect(struct device *dev, int slot)
+{
+	int ret = -EIO;
+	u8 read_reg = 0;
+	struct platform_device *pdev = to_platform_device(dev);
+
+	if (pdev->id) {
+		/* TWL6030 provide's Card detect support for
+		 * only MMC1 controller.
+		 */
+		pr_err("Unknown MMC controller %d in %s\n", pdev->id, __func__);
+		return ret;
+	}
+	/*
+	 * BIT0 of MMC_CTRL on TWL6030 provides card status for MMC1
+	 * 0 - Card not present ,1 - Card present
+	 */
+	ret = twl_i2c_read_u8(TWL6030_MODULE_ID0, &read_reg,
+						TWL6030_MMCCTRL);
+	if (ret >= 0)
+		ret = read_reg & STS_MMC;
+	return ret;
+}
+EXPORT_SYMBOL(twl6030_mmc_card_detect);
+
+static int twl6030_irq_map(struct irq_domain *d, unsigned int virq,
+			      irq_hw_number_t hwirq)
+{
+	struct twl6030_irq *pdata = d->host_data;
+
+	irq_set_chip_data(virq, pdata);
+	irq_set_chip_and_handler(virq,  &pdata->irq_chip, handle_simple_irq);
+	irq_set_nested_thread(virq, true);
+	irq_set_parent(virq, pdata->twl_irq);
+
+#ifdef CONFIG_ARM
+	/*
+	 * ARM requires an extra step to clear IRQ_NOREQUEST, which it
+	 * sets on behalf of every irq_chip.  Also sets IRQ_NOPROBE.
+	 */
+	set_irq_flags(virq, IRQF_VALID);
+#else
+	/* same effect on other architectures */
+	irq_set_noprobe(virq);
+#endif
+
+	return 0;
+}
+
+static void twl6030_irq_unmap(struct irq_domain *d, unsigned int virq)
+{
+#ifdef CONFIG_ARM
+	set_irq_flags(virq, 0);
+#endif
+	irq_set_chip_and_handler(virq, NULL, NULL);
+	irq_set_chip_data(virq, NULL);
+}
+
+static struct irq_domain_ops twl6030_irq_domain_ops = {
+	.map	= twl6030_irq_map,
+	.unmap	= twl6030_irq_unmap,
+	.xlate	= irq_domain_xlate_onetwocell,
+};
+
+static const struct of_device_id twl6030_of_match[] = {
+	{.compatible = "ti,twl6030", &twl6030_interrupt_mapping},
+	{.compatible = "ti,twl6032", &twl6032_interrupt_mapping},
+	{ },
+};
+
+int twl6030_init_irq(struct device *dev, int irq_num)
+{
+	struct			device_node *node = dev->of_node;
+	int			nr_irqs;
+	int			status;
+	u8			mask[3];
+	const struct of_device_id *of_id;
+
+	of_id = of_match_device(twl6030_of_match, dev);
+	if (!of_id || !of_id->data) {
+		dev_err(dev, "Unknown TWL device model\n");
+		return -EINVAL;
+	}
+
+	nr_irqs = TWL6030_NR_IRQS;
+
+	twl6030_irq = devm_kzalloc(dev, sizeof(*twl6030_irq), GFP_KERNEL);
+	if (!twl6030_irq) {
+		dev_err(dev, "twl6030_irq: Memory allocation failed\n");
+		return -ENOMEM;
+	}
+
+	mask[0] = 0xFF;
+	mask[1] = 0xFF;
+	mask[2] = 0xFF;
+
+	/* mask all int lines */
+	status = twl_i2c_write(TWL_MODULE_PIH, &mask[0], REG_INT_MSK_LINE_A, 3);
+	/* mask all int sts */
+	status |= twl_i2c_write(TWL_MODULE_PIH, &mask[0], REG_INT_MSK_STS_A, 3);
+	/* clear INT_STS_A,B,C */
+	status |= twl_i2c_write(TWL_MODULE_PIH, &mask[0], REG_INT_STS_A, 3);
+
+	if (status < 0) {
+		dev_err(dev, "I2C err writing TWL_MODULE_PIH: %d\n", status);
+		return status;
+	}
+
+	/*
+	 * install an irq handler for each of the modules;
+	 * clone dummy irq_chip since PIH can't *do* anything
+	 */
+	twl6030_irq->irq_chip = dummy_irq_chip;
+	twl6030_irq->irq_chip.name = "twl6030";
+	twl6030_irq->irq_chip.irq_set_type = NULL;
+	twl6030_irq->irq_chip.irq_set_wake = twl6030_irq_set_wake;
+
+	twl6030_irq->pm_nb.notifier_call = twl6030_irq_pm_notifier;
+	atomic_set(&twl6030_irq->wakeirqs, 0);
+	twl6030_irq->irq_mapping_tbl = of_id->data;
+
+	twl6030_irq->irq_domain =
+		irq_domain_add_linear(node, nr_irqs,
+				      &twl6030_irq_domain_ops, twl6030_irq);
+	if (!twl6030_irq->irq_domain) {
+		dev_err(dev, "Can't add irq_domain\n");
+		return -ENOMEM;
+	}
+
+	dev_info(dev, "PIH (irq %d) nested IRQs\n", irq_num);
+
+	/* install an irq handler to demultiplex the TWL6030 interrupt */
+	status = request_threaded_irq(irq_num, NULL, twl6030_irq_thread,
+				      IRQF_ONESHOT, "TWL6030-PIH", twl6030_irq);
+	if (status < 0) {
+		dev_err(dev, "could not claim irq %d: %d\n", irq_num, status);
+		goto fail_irq;
+	}
+
+	twl6030_irq->twl_irq = irq_num;
+	register_pm_notifier(&twl6030_irq->pm_nb);
+	return 0;
+
+fail_irq:
+	irq_domain_remove(twl6030_irq->irq_domain);
+	return status;
+}
+
+int twl6030_exit_irq(void)
+{
+	if (twl6030_irq && twl6030_irq->twl_irq) {
+		unregister_pm_notifier(&twl6030_irq->pm_nb);
+		free_irq(twl6030_irq->twl_irq, NULL);
+		/*
+		 * TODO: IRQ domain and allocated nested IRQ descriptors
+		 * should be freed somehow here. Now It can't be done, because
+		 * child devices will not be deleted during removing of
+		 * TWL Core driver and they will still contain allocated
+		 * virt IRQs in their Resources tables.
+		 * The same prevents us from using devm_request_threaded_irq()
+		 * in this module.
+		 */
+	}
+	return 0;
+}
+