Linux-libre 4.7.1-gnupck-4.7.1-gnu

1 files changed, 32 insertions, 29 deletions

diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index 80169643d..5d438ad3e 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -1251,10 +1251,11 @@ static int mmc_select_hs200(struct mmc_card *card)
 {
 	struct mmc_host *host = card->host;
 	bool send_status = true;
-	unsigned int old_timing;
+	unsigned int old_timing, old_signal_voltage;
 	int err = -EINVAL;
 	u8 val;
 
+	old_signal_voltage = host->ios.signal_voltage;
 	if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS200_1_2V)
 		err = __mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120);
 
@@ -1263,7 +1264,7 @@ static int mmc_select_hs200(struct mmc_card *card)
 
 	/* If fails try again during next card power cycle */
 	if (err)
-		goto err;
+		return err;
 
 	mmc_select_driver_type(card);
 
@@ -1275,7 +1276,7 @@ static int mmc_select_hs200(struct mmc_card *card)
 	 * switch to HS200 mode if bus width is set successfully.
 	 */
 	err = mmc_select_bus_width(card);
-	if (!IS_ERR_VALUE(err)) {
+	if (err >= 0) {
 		val = EXT_CSD_TIMING_HS200 |
 		      card->drive_strength << EXT_CSD_DRV_STR_SHIFT;
 		err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
@@ -1297,9 +1298,14 @@ static int mmc_select_hs200(struct mmc_card *card)
 		}
 	}
 err:
-	if (err)
+	if (err) {
+		/* fall back to the old signal voltage, if fails report error */
+		if (__mmc_set_signal_voltage(host, old_signal_voltage))
+			err = -EIO;
+
 		pr_err("%s: %s failed, error %d\n", mmc_hostname(card->host),
 		       __func__, err);
+	}
 	return err;
 }
 
@@ -1321,21 +1327,13 @@ static int mmc_select_timing(struct mmc_card *card)
 	if (err && err != -EBADMSG)
 		return err;
 
-	if (err) {
-		pr_warn("%s: switch to %s failed\n",
-			mmc_card_hs(card) ? "high-speed" :
-			(mmc_card_hs200(card) ? "hs200" : ""),
-			mmc_hostname(card->host));
-		err = 0;
-	}
-
 bus_speed:
 	/*
 	 * Set the bus speed to the selected bus timing.
 	 * If timing is not selected, backward compatible is the default.
 	 */
 	mmc_set_bus_speed(card);
-	return err;
+	return 0;
 }
 
 /*
@@ -1490,12 +1488,13 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
 		if (err)
 			goto free_card;
 
-		/* If doing byte addressing, check if required to do sector
+		/*
+		 * If doing byte addressing, check if required to do sector
 		 * addressing.  Handle the case of <2GB cards needing sector
 		 * addressing.  See section 8.1 JEDEC Standard JED84-A441;
 		 * ocr register has bit 30 set for sector addressing.
 		 */
-		if (!(mmc_card_blockaddr(card)) && (rocr & (1<<30)))
+		if (rocr & BIT(30))
 			mmc_card_set_blockaddr(card);
 
 		/* Erase size depends on CSD and Extended CSD */
@@ -1584,7 +1583,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
 	} else if (mmc_card_hs(card)) {
 		/* Select the desired bus width optionally */
 		err = mmc_select_bus_width(card);
-		if (!IS_ERR_VALUE(err)) {
+		if (err >= 0) {
 			err = mmc_select_hs_ddr(card);
 			if (err)
 				goto free_card;
@@ -1964,19 +1963,23 @@ static int mmc_reset(struct mmc_host *host)
 {
 	struct mmc_card *card = host->card;
 
-	if (!(host->caps & MMC_CAP_HW_RESET) || !host->ops->hw_reset)
-		return -EOPNOTSUPP;
-
-	if (!mmc_can_reset(card))
-		return -EOPNOTSUPP;
-
-	mmc_set_clock(host, host->f_init);
-
-	host->ops->hw_reset(host);
-
-	/* Set initial state and call mmc_set_ios */
-	mmc_set_initial_state(host);
-
+	/*
+	 * In the case of recovery, we can't expect flushing the cache to work
+	 * always, but we have a go and ignore errors.
+	 */
+	mmc_flush_cache(host->card);
+
+	if ((host->caps & MMC_CAP_HW_RESET) && host->ops->hw_reset &&
+	     mmc_can_reset(card)) {
+		/* If the card accept RST_n signal, send it. */
+		mmc_set_clock(host, host->f_init);
+		host->ops->hw_reset(host);
+		/* Set initial state and call mmc_set_ios */
+		mmc_set_initial_state(host);
+	} else {
+		/* Do a brute force power cycle */
+		mmc_power_cycle(host, card->ocr);
+	}
 	return mmc_init_card(host, card->ocr, card);
 }