Linux-libre 4.2-gnu

1 files changed, 42 insertions, 71 deletions

diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
index 31a9ef256..4e7366ab1 100644
--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -386,64 +386,31 @@ out:
 
 static int sd_select_driver_type(struct mmc_card *card, u8 *status)
 {
-	int host_drv_type = SD_DRIVER_TYPE_B;
-	int card_drv_type = SD_DRIVER_TYPE_B;
-	int drive_strength;
+	int card_drv_type, drive_strength, drv_type;
 	int err;
 
-	/*
-	 * If the host doesn't support any of the Driver Types A,C or D,
-	 * or there is no board specific handler then default Driver
-	 * Type B is used.
-	 */
-	if (!(card->host->caps & (MMC_CAP_DRIVER_TYPE_A | MMC_CAP_DRIVER_TYPE_C
-	    | MMC_CAP_DRIVER_TYPE_D)))
-		return 0;
-
-	if (!card->host->ops->select_drive_strength)
-		return 0;
-
-	if (card->host->caps & MMC_CAP_DRIVER_TYPE_A)
-		host_drv_type |= SD_DRIVER_TYPE_A;
-
-	if (card->host->caps & MMC_CAP_DRIVER_TYPE_C)
-		host_drv_type |= SD_DRIVER_TYPE_C;
-
-	if (card->host->caps & MMC_CAP_DRIVER_TYPE_D)
-		host_drv_type |= SD_DRIVER_TYPE_D;
-
-	if (card->sw_caps.sd3_drv_type & SD_DRIVER_TYPE_A)
-		card_drv_type |= SD_DRIVER_TYPE_A;
-
-	if (card->sw_caps.sd3_drv_type & SD_DRIVER_TYPE_C)
-		card_drv_type |= SD_DRIVER_TYPE_C;
+	card->drive_strength = 0;
 
-	if (card->sw_caps.sd3_drv_type & SD_DRIVER_TYPE_D)
-		card_drv_type |= SD_DRIVER_TYPE_D;
+	card_drv_type = card->sw_caps.sd3_drv_type | SD_DRIVER_TYPE_B;
 
-	/*
-	 * The drive strength that the hardware can support
-	 * depends on the board design.  Pass the appropriate
-	 * information and let the hardware specific code
-	 * return what is possible given the options
-	 */
-	mmc_host_clk_hold(card->host);
-	drive_strength = card->host->ops->select_drive_strength(
-		card->sw_caps.uhs_max_dtr,
-		host_drv_type, card_drv_type);
-	mmc_host_clk_release(card->host);
-
-	err = mmc_sd_switch(card, 1, 2, drive_strength, status);
-	if (err)
-		return err;
+	drive_strength = mmc_select_drive_strength(card,
+						   card->sw_caps.uhs_max_dtr,
+						   card_drv_type, &drv_type);
 
-	if ((status[15] & 0xF) != drive_strength) {
-		pr_warn("%s: Problem setting drive strength!\n",
-			mmc_hostname(card->host));
-		return 0;
+	if (drive_strength) {
+		err = mmc_sd_switch(card, 1, 2, drive_strength, status);
+		if (err)
+			return err;
+		if ((status[15] & 0xF) != drive_strength) {
+			pr_warn("%s: Problem setting drive strength!\n",
+				mmc_hostname(card->host));
+			return 0;
+		}
+		card->drive_strength = drive_strength;
 	}
 
-	mmc_set_driver_type(card->host, drive_strength);
+	if (drv_type)
+		mmc_set_driver_type(card->host, drv_type);
 
 	return 0;
 }
@@ -804,6 +771,28 @@ int mmc_sd_get_csd(struct mmc_host *host, struct mmc_card *card)
 	return 0;
 }
 
+static int mmc_sd_get_ro(struct mmc_host *host)
+{
+	int ro;
+
+	/*
+	 * Some systems don't feature a write-protect pin and don't need one.
+	 * E.g. because they only have micro-SD card slot. For those systems
+	 * assume that the SD card is always read-write.
+	 */
+	if (host->caps2 & MMC_CAP2_NO_WRITE_PROTECT)
+		return 0;
+
+	if (!host->ops->get_ro)
+		return -1;
+
+	mmc_host_clk_hold(host);
+	ro = host->ops->get_ro(host);
+	mmc_host_clk_release(host);
+
+	return ro;
+}
+
 int mmc_sd_setup_card(struct mmc_host *host, struct mmc_card *card,
 	bool reinit)
 {
@@ -855,13 +844,7 @@ int mmc_sd_setup_card(struct mmc_host *host, struct mmc_card *card,
 	 * Check if read-only switch is active.
 	 */
 	if (!reinit) {
-		int ro = -1;
-
-		if (host->ops->get_ro) {
-			mmc_host_clk_hold(card->host);
-			ro = host->ops->get_ro(host);
-			mmc_host_clk_release(card->host);
-		}
+		int ro = mmc_sd_get_ro(host);
 
 		if (ro < 0) {
 			pr_warn("%s: host does not support reading read-only switch, assuming write-enable\n",
@@ -1181,21 +1164,10 @@ static int mmc_sd_runtime_resume(struct mmc_host *host)
 	return 0;
 }
 
-static int mmc_sd_power_restore(struct mmc_host *host)
-{
-	int ret;
-
-	mmc_claim_host(host);
-	ret = mmc_sd_init_card(host, host->card->ocr, host->card);
-	mmc_release_host(host);
-
-	return ret;
-}
-
 static int mmc_sd_reset(struct mmc_host *host)
 {
 	mmc_power_cycle(host, host->card->ocr);
-	return mmc_sd_power_restore(host);
+	return mmc_sd_init_card(host, host->card->ocr, host->card);
 }
 
 static const struct mmc_bus_ops mmc_sd_ops = {
@@ -1205,7 +1177,6 @@ static const struct mmc_bus_ops mmc_sd_ops = {
 	.runtime_resume = mmc_sd_runtime_resume,
 	.suspend = mmc_sd_suspend,
 	.resume = mmc_sd_resume,
-	.power_restore = mmc_sd_power_restore,
 	.alive = mmc_sd_alive,
 	.shutdown = mmc_sd_suspend,
 	.reset = mmc_sd_reset,