Initial import

1 files changed, 3042 insertions, 0 deletions

diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
new file mode 100644
index 000000000..5f5adafb2
--- /dev/null
+++ b/drivers/mmc/host/dw_mmc.c
@@ -0,0 +1,3042 @@
+/*
+ * Synopsys DesignWare Multimedia Card Interface driver
+ *  (Based on NXP driver for lpc 31xx)
+ *
+ * Copyright (C) 2009 NXP Semiconductors
+ * Copyright (C) 2009, 2010 Imagination Technologies Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/blkdev.h>
+#include <linux/clk.h>
+#include <linux/debugfs.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/seq_file.h>
+#include <linux/slab.h>
+#include <linux/stat.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/mmc/card.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/mmc.h>
+#include <linux/mmc/sd.h>
+#include <linux/mmc/sdio.h>
+#include <linux/mmc/dw_mmc.h>
+#include <linux/bitops.h>
+#include <linux/regulator/consumer.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/mmc/slot-gpio.h>
+
+#include "dw_mmc.h"
+
+/* Common flag combinations */
+#define DW_MCI_DATA_ERROR_FLAGS	(SDMMC_INT_DRTO | SDMMC_INT_DCRC | \
+				 SDMMC_INT_HTO | SDMMC_INT_SBE  | \
+				 SDMMC_INT_EBE)
+#define DW_MCI_CMD_ERROR_FLAGS	(SDMMC_INT_RTO | SDMMC_INT_RCRC | \
+				 SDMMC_INT_RESP_ERR)
+#define DW_MCI_ERROR_FLAGS	(DW_MCI_DATA_ERROR_FLAGS | \
+				 DW_MCI_CMD_ERROR_FLAGS  | SDMMC_INT_HLE)
+#define DW_MCI_SEND_STATUS	1
+#define DW_MCI_RECV_STATUS	2
+#define DW_MCI_DMA_THRESHOLD	16
+
+#define DW_MCI_FREQ_MAX	200000000	/* unit: HZ */
+#define DW_MCI_FREQ_MIN	400000		/* unit: HZ */
+
+#ifdef CONFIG_MMC_DW_IDMAC
+#define IDMAC_INT_CLR		(SDMMC_IDMAC_INT_AI | SDMMC_IDMAC_INT_NI | \
+				 SDMMC_IDMAC_INT_CES | SDMMC_IDMAC_INT_DU | \
+				 SDMMC_IDMAC_INT_FBE | SDMMC_IDMAC_INT_RI | \
+				 SDMMC_IDMAC_INT_TI)
+
+struct idmac_desc_64addr {
+	u32		des0;	/* Control Descriptor */
+
+	u32		des1;	/* Reserved */
+
+	u32		des2;	/*Buffer sizes */
+#define IDMAC_64ADDR_SET_BUFFER1_SIZE(d, s) \
+	((d)->des2 = ((d)->des2 & cpu_to_le32(0x03ffe000)) | \
+	 ((cpu_to_le32(s)) & cpu_to_le32(0x1fff)))
+
+	u32		des3;	/* Reserved */
+
+	u32		des4;	/* Lower 32-bits of Buffer Address Pointer 1*/
+	u32		des5;	/* Upper 32-bits of Buffer Address Pointer 1*/
+
+	u32		des6;	/* Lower 32-bits of Next Descriptor Address */
+	u32		des7;	/* Upper 32-bits of Next Descriptor Address */
+};
+
+struct idmac_desc {
+	__le32		des0;	/* Control Descriptor */
+#define IDMAC_DES0_DIC	BIT(1)
+#define IDMAC_DES0_LD	BIT(2)
+#define IDMAC_DES0_FD	BIT(3)
+#define IDMAC_DES0_CH	BIT(4)
+#define IDMAC_DES0_ER	BIT(5)
+#define IDMAC_DES0_CES	BIT(30)
+#define IDMAC_DES0_OWN	BIT(31)
+
+	__le32		des1;	/* Buffer sizes */
+#define IDMAC_SET_BUFFER1_SIZE(d, s) \
+	((d)->des1 = ((d)->des1 & 0x03ffe000) | ((s) & 0x1fff))
+
+	__le32		des2;	/* buffer 1 physical address */
+
+	__le32		des3;	/* buffer 2 physical address */
+};
+#endif /* CONFIG_MMC_DW_IDMAC */
+
+static bool dw_mci_reset(struct dw_mci *host);
+static bool dw_mci_ctrl_reset(struct dw_mci *host, u32 reset);
+static int dw_mci_card_busy(struct mmc_host *mmc);
+
+#if defined(CONFIG_DEBUG_FS)
+static int dw_mci_req_show(struct seq_file *s, void *v)
+{
+	struct dw_mci_slot *slot = s->private;
+	struct mmc_request *mrq;
+	struct mmc_command *cmd;
+	struct mmc_command *stop;
+	struct mmc_data	*data;
+
+	/* Make sure we get a consistent snapshot */
+	spin_lock_bh(&slot->host->lock);
+	mrq = slot->mrq;
+
+	if (mrq) {
+		cmd = mrq->cmd;
+		data = mrq->data;
+		stop = mrq->stop;
+
+		if (cmd)
+			seq_printf(s,
+				   "CMD%u(0x%x) flg %x rsp %x %x %x %x err %d\n",
+				   cmd->opcode, cmd->arg, cmd->flags,
+				   cmd->resp[0], cmd->resp[1], cmd->resp[2],
+				   cmd->resp[2], cmd->error);
+		if (data)
+			seq_printf(s, "DATA %u / %u * %u flg %x err %d\n",
+				   data->bytes_xfered, data->blocks,
+				   data->blksz, data->flags, data->error);
+		if (stop)
+			seq_printf(s,
+				   "CMD%u(0x%x) flg %x rsp %x %x %x %x err %d\n",
+				   stop->opcode, stop->arg, stop->flags,
+				   stop->resp[0], stop->resp[1], stop->resp[2],
+				   stop->resp[2], stop->error);
+	}
+
+	spin_unlock_bh(&slot->host->lock);
+
+	return 0;
+}
+
+static int dw_mci_req_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, dw_mci_req_show, inode->i_private);
+}
+
+static const struct file_operations dw_mci_req_fops = {
+	.owner		= THIS_MODULE,
+	.open		= dw_mci_req_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static int dw_mci_regs_show(struct seq_file *s, void *v)
+{
+	seq_printf(s, "STATUS:\t0x%08x\n", SDMMC_STATUS);
+	seq_printf(s, "RINTSTS:\t0x%08x\n", SDMMC_RINTSTS);
+	seq_printf(s, "CMD:\t0x%08x\n", SDMMC_CMD);
+	seq_printf(s, "CTRL:\t0x%08x\n", SDMMC_CTRL);
+	seq_printf(s, "INTMASK:\t0x%08x\n", SDMMC_INTMASK);
+	seq_printf(s, "CLKENA:\t0x%08x\n", SDMMC_CLKENA);
+
+	return 0;
+}
+
+static int dw_mci_regs_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, dw_mci_regs_show, inode->i_private);
+}
+
+static const struct file_operations dw_mci_regs_fops = {
+	.owner		= THIS_MODULE,
+	.open		= dw_mci_regs_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static void dw_mci_init_debugfs(struct dw_mci_slot *slot)
+{
+	struct mmc_host	*mmc = slot->mmc;
+	struct dw_mci *host = slot->host;
+	struct dentry *root;
+	struct dentry *node;
+
+	root = mmc->debugfs_root;
+	if (!root)
+		return;
+
+	node = debugfs_create_file("regs", S_IRUSR, root, host,
+				   &dw_mci_regs_fops);
+	if (!node)
+		goto err;
+
+	node = debugfs_create_file("req", S_IRUSR, root, slot,
+				   &dw_mci_req_fops);
+	if (!node)
+		goto err;
+
+	node = debugfs_create_u32("state", S_IRUSR, root, (u32 *)&host->state);
+	if (!node)
+		goto err;
+
+	node = debugfs_create_x32("pending_events", S_IRUSR, root,
+				  (u32 *)&host->pending_events);
+	if (!node)
+		goto err;
+
+	node = debugfs_create_x32("completed_events", S_IRUSR, root,
+				  (u32 *)&host->completed_events);
+	if (!node)
+		goto err;
+
+	return;
+
+err:
+	dev_err(&mmc->class_dev, "failed to initialize debugfs for slot\n");
+}
+#endif /* defined(CONFIG_DEBUG_FS) */
+
+static void mci_send_cmd(struct dw_mci_slot *slot, u32 cmd, u32 arg);
+
+static u32 dw_mci_prepare_command(struct mmc_host *mmc, struct mmc_command *cmd)
+{
+	struct mmc_data	*data;
+	struct dw_mci_slot *slot = mmc_priv(mmc);
+	struct dw_mci *host = slot->host;
+	const struct dw_mci_drv_data *drv_data = slot->host->drv_data;
+	u32 cmdr;
+	cmd->error = -EINPROGRESS;
+
+	cmdr = cmd->opcode;
+
+	if (cmd->opcode == MMC_STOP_TRANSMISSION ||
+	    cmd->opcode == MMC_GO_IDLE_STATE ||
+	    cmd->opcode == MMC_GO_INACTIVE_STATE ||
+	    (cmd->opcode == SD_IO_RW_DIRECT &&
+	     ((cmd->arg >> 9) & 0x1FFFF) == SDIO_CCCR_ABORT))
+		cmdr |= SDMMC_CMD_STOP;
+	else if (cmd->opcode != MMC_SEND_STATUS && cmd->data)
+		cmdr |= SDMMC_CMD_PRV_DAT_WAIT;
+
+	if (cmd->opcode == SD_SWITCH_VOLTAGE) {
+		u32 clk_en_a;
+
+		/* Special bit makes CMD11 not die */
+		cmdr |= SDMMC_CMD_VOLT_SWITCH;
+
+		/* Change state to continue to handle CMD11 weirdness */
+		WARN_ON(slot->host->state != STATE_SENDING_CMD);
+		slot->host->state = STATE_SENDING_CMD11;
+
+		/*
+		 * We need to disable low power mode (automatic clock stop)
+		 * while doing voltage switch so we don't confuse the card,
+		 * since stopping the clock is a specific part of the UHS
+		 * voltage change dance.
+		 *
+		 * Note that low power mode (SDMMC_CLKEN_LOW_PWR) will be
+		 * unconditionally turned back on in dw_mci_setup_bus() if it's
+		 * ever called with a non-zero clock.  That shouldn't happen
+		 * until the voltage change is all done.
+		 */
+		clk_en_a = mci_readl(host, CLKENA);
+		clk_en_a &= ~(SDMMC_CLKEN_LOW_PWR << slot->id);
+		mci_writel(host, CLKENA, clk_en_a);
+		mci_send_cmd(slot, SDMMC_CMD_UPD_CLK |
+			     SDMMC_CMD_PRV_DAT_WAIT, 0);
+	}
+
+	if (cmd->flags & MMC_RSP_PRESENT) {
+		/* We expect a response, so set this bit */
+		cmdr |= SDMMC_CMD_RESP_EXP;
+		if (cmd->flags & MMC_RSP_136)
+			cmdr |= SDMMC_CMD_RESP_LONG;
+	}
+
+	if (cmd->flags & MMC_RSP_CRC)
+		cmdr |= SDMMC_CMD_RESP_CRC;
+
+	data = cmd->data;
+	if (data) {
+		cmdr |= SDMMC_CMD_DAT_EXP;
+		if (data->flags & MMC_DATA_STREAM)
+			cmdr |= SDMMC_CMD_STRM_MODE;
+		if (data->flags & MMC_DATA_WRITE)
+			cmdr |= SDMMC_CMD_DAT_WR;
+	}
+
+	if (drv_data && drv_data->prepare_command)
+		drv_data->prepare_command(slot->host, &cmdr);
+
+	return cmdr;
+}
+
+static u32 dw_mci_prep_stop_abort(struct dw_mci *host, struct mmc_command *cmd)
+{
+	struct mmc_command *stop;
+	u32 cmdr;
+
+	if (!cmd->data)
+		return 0;
+
+	stop = &host->stop_abort;
+	cmdr = cmd->opcode;
+	memset(stop, 0, sizeof(struct mmc_command));
+
+	if (cmdr == MMC_READ_SINGLE_BLOCK ||
+	    cmdr == MMC_READ_MULTIPLE_BLOCK ||
+	    cmdr == MMC_WRITE_BLOCK ||
+	    cmdr == MMC_WRITE_MULTIPLE_BLOCK ||
+	    cmdr == MMC_SEND_TUNING_BLOCK ||
+	    cmdr == MMC_SEND_TUNING_BLOCK_HS200) {
+		stop->opcode = MMC_STOP_TRANSMISSION;
+		stop->arg = 0;
+		stop->flags = MMC_RSP_R1B | MMC_CMD_AC;
+	} else if (cmdr == SD_IO_RW_EXTENDED) {
+		stop->opcode = SD_IO_RW_DIRECT;
+		stop->arg |= (1 << 31) | (0 << 28) | (SDIO_CCCR_ABORT << 9) |
+			     ((cmd->arg >> 28) & 0x7);
+		stop->flags = MMC_RSP_SPI_R5 | MMC_RSP_R5 | MMC_CMD_AC;
+	} else {
+		return 0;
+	}
+
+	cmdr = stop->opcode | SDMMC_CMD_STOP |
+		SDMMC_CMD_RESP_CRC | SDMMC_CMD_RESP_EXP;
+
+	return cmdr;
+}
+
+static void dw_mci_wait_while_busy(struct dw_mci *host, u32 cmd_flags)
+{
+	unsigned long timeout = jiffies + msecs_to_jiffies(500);
+
+	/*
+	 * Databook says that before issuing a new data transfer command
+	 * we need to check to see if the card is busy.  Data transfer commands
+	 * all have SDMMC_CMD_PRV_DAT_WAIT set, so we'll key off that.
+	 *
+	 * ...also allow sending for SDMMC_CMD_VOLT_SWITCH where busy is
+	 * expected.
+	 */
+	if ((cmd_flags & SDMMC_CMD_PRV_DAT_WAIT) &&
+	    !(cmd_flags & SDMMC_CMD_VOLT_SWITCH)) {
+		while (mci_readl(host, STATUS) & SDMMC_STATUS_BUSY) {
+			if (time_after(jiffies, timeout)) {
+				/* Command will fail; we'll pass error then */
+				dev_err(host->dev, "Busy; trying anyway\n");
+				break;
+			}
+			udelay(10);
+		}
+	}
+}
+
+static void dw_mci_start_command(struct dw_mci *host,
+				 struct mmc_command *cmd, u32 cmd_flags)
+{
+	host->cmd = cmd;
+	dev_vdbg(host->dev,
+		 "start command: ARGR=0x%08x CMDR=0x%08x\n",
+		 cmd->arg, cmd_flags);
+
+	mci_writel(host, CMDARG, cmd->arg);
+	wmb();
+	dw_mci_wait_while_busy(host, cmd_flags);
+
+	mci_writel(host, CMD, cmd_flags | SDMMC_CMD_START);
+}
+
+static inline void send_stop_abort(struct dw_mci *host, struct mmc_data *data)
+{
+	struct mmc_command *stop = data->stop ? data->stop : &host->stop_abort;
+	dw_mci_start_command(host, stop, host->stop_cmdr);
+}
+
+/* DMA interface functions */
+static void dw_mci_stop_dma(struct dw_mci *host)
+{
+	if (host->using_dma) {
+		host->dma_ops->stop(host);
+		host->dma_ops->cleanup(host);
+	}
+
+	/* Data transfer was stopped by the interrupt handler */
+	set_bit(EVENT_XFER_COMPLETE, &host->pending_events);
+}
+
+static int dw_mci_get_dma_dir(struct mmc_data *data)
+{
+	if (data->flags & MMC_DATA_WRITE)
+		return DMA_TO_DEVICE;
+	else
+		return DMA_FROM_DEVICE;
+}
+
+#ifdef CONFIG_MMC_DW_IDMAC
+static void dw_mci_dma_cleanup(struct dw_mci *host)
+{
+	struct mmc_data *data = host->data;
+
+	if (data)
+		if (!data->host_cookie)
+			dma_unmap_sg(host->dev,
+				     data->sg,
+				     data->sg_len,
+				     dw_mci_get_dma_dir(data));
+}
+
+static void dw_mci_idmac_reset(struct dw_mci *host)
+{
+	u32 bmod = mci_readl(host, BMOD);
+	/* Software reset of DMA */
+	bmod |= SDMMC_IDMAC_SWRESET;
+	mci_writel(host, BMOD, bmod);
+}
+
+static void dw_mci_idmac_stop_dma(struct dw_mci *host)
+{
+	u32 temp;
+
+	/* Disable and reset the IDMAC interface */
+	temp = mci_readl(host, CTRL);
+	temp &= ~SDMMC_CTRL_USE_IDMAC;
+	temp |= SDMMC_CTRL_DMA_RESET;
+	mci_writel(host, CTRL, temp);
+
+	/* Stop the IDMAC running */
+	temp = mci_readl(host, BMOD);
+	temp &= ~(SDMMC_IDMAC_ENABLE | SDMMC_IDMAC_FB);
+	temp |= SDMMC_IDMAC_SWRESET;
+	mci_writel(host, BMOD, temp);
+}
+
+static void dw_mci_idmac_complete_dma(struct dw_mci *host)
+{
+	struct mmc_data *data = host->data;
+
+	dev_vdbg(host->dev, "DMA complete\n");
+
+	host->dma_ops->cleanup(host);
+
+	/*
+	 * If the card was removed, data will be NULL. No point in trying to
+	 * send the stop command or waiting for NBUSY in this case.
+	 */
+	if (data) {
+		set_bit(EVENT_XFER_COMPLETE, &host->pending_events);
+		tasklet_schedule(&host->tasklet);
+	}
+}
+
+static void dw_mci_translate_sglist(struct dw_mci *host, struct mmc_data *data,
+				    unsigned int sg_len)
+{
+	int i;
+	if (host->dma_64bit_address == 1) {
+		struct idmac_desc_64addr *desc = host->sg_cpu;
+
+		for (i = 0; i < sg_len; i++, desc++) {
+			unsigned int length = sg_dma_len(&data->sg[i]);
+			u64 mem_addr = sg_dma_address(&data->sg[i]);
+
+			/*
+			 * Set the OWN bit and disable interrupts for this
+			 * descriptor
+			 */
+			desc->des0 = IDMAC_DES0_OWN | IDMAC_DES0_DIC |
+						IDMAC_DES0_CH;
+			/* Buffer length */
+			IDMAC_64ADDR_SET_BUFFER1_SIZE(desc, length);
+
+			/* Physical address to DMA to/from */
+			desc->des4 = mem_addr & 0xffffffff;
+			desc->des5 = mem_addr >> 32;
+		}
+
+		/* Set first descriptor */
+		desc = host->sg_cpu;
+		desc->des0 |= IDMAC_DES0_FD;
+
+		/* Set last descriptor */
+		desc = host->sg_cpu + (i - 1) *
+				sizeof(struct idmac_desc_64addr);
+		desc->des0 &= ~(IDMAC_DES0_CH | IDMAC_DES0_DIC);
+		desc->des0 |= IDMAC_DES0_LD;
+
+	} else {
+		struct idmac_desc *desc = host->sg_cpu;
+
+		for (i = 0; i < sg_len; i++, desc++) {
+			unsigned int length = sg_dma_len(&data->sg[i]);
+			u32 mem_addr = sg_dma_address(&data->sg[i]);
+
+			/*
+			 * Set the OWN bit and disable interrupts for this
+			 * descriptor
+			 */
+			desc->des0 = cpu_to_le32(IDMAC_DES0_OWN |
+					IDMAC_DES0_DIC | IDMAC_DES0_CH);
+			/* Buffer length */
+			IDMAC_SET_BUFFER1_SIZE(desc, length);
+
+			/* Physical address to DMA to/from */
+			desc->des2 = cpu_to_le32(mem_addr);
+		}
+
+		/* Set first descriptor */
+		desc = host->sg_cpu;
+		desc->des0 |= cpu_to_le32(IDMAC_DES0_FD);
+
+		/* Set last descriptor */
+		desc = host->sg_cpu + (i - 1) * sizeof(struct idmac_desc);
+		desc->des0 &= cpu_to_le32(~(IDMAC_DES0_CH | IDMAC_DES0_DIC));
+		desc->des0 |= cpu_to_le32(IDMAC_DES0_LD);
+	}
+
+	wmb();
+}
+
+static void dw_mci_idmac_start_dma(struct dw_mci *host, unsigned int sg_len)
+{
+	u32 temp;
+
+	dw_mci_translate_sglist(host, host->data, sg_len);
+
+	/* Make sure to reset DMA in case we did PIO before this */
+	dw_mci_ctrl_reset(host, SDMMC_CTRL_DMA_RESET);
+	dw_mci_idmac_reset(host);
+
+	/* Select IDMAC interface */
+	temp = mci_readl(host, CTRL);
+	temp |= SDMMC_CTRL_USE_IDMAC;
+	mci_writel(host, CTRL, temp);
+
+	wmb();
+
+	/* Enable the IDMAC */
+	temp = mci_readl(host, BMOD);
+	temp |= SDMMC_IDMAC_ENABLE | SDMMC_IDMAC_FB;
+	mci_writel(host, BMOD, temp);
+
+	/* Start it running */
+	mci_writel(host, PLDMND, 1);
+}
+
+static int dw_mci_idmac_init(struct dw_mci *host)
+{
+	int i;
+
+	if (host->dma_64bit_address == 1) {
+		struct idmac_desc_64addr *p;
+		/* Number of descriptors in the ring buffer */
+		host->ring_size = PAGE_SIZE / sizeof(struct idmac_desc_64addr);
+
+		/* Forward link the descriptor list */
+		for (i = 0, p = host->sg_cpu; i < host->ring_size - 1;
+								i++, p++) {
+			p->des6 = (host->sg_dma +
+					(sizeof(struct idmac_desc_64addr) *
+							(i + 1))) & 0xffffffff;
+
+			p->des7 = (u64)(host->sg_dma +
+					(sizeof(struct idmac_desc_64addr) *
+							(i + 1))) >> 32;
+			/* Initialize reserved and buffer size fields to "0" */
+			p->des1 = 0;
+			p->des2 = 0;
+			p->des3 = 0;
+		}
+
+		/* Set the last descriptor as the end-of-ring descriptor */
+		p->des6 = host->sg_dma & 0xffffffff;
+		p->des7 = (u64)host->sg_dma >> 32;
+		p->des0 = IDMAC_DES0_ER;
+
+	} else {
+		struct idmac_desc *p;
+		/* Number of descriptors in the ring buffer */
+		host->ring_size = PAGE_SIZE / sizeof(struct idmac_desc);
+
+		/* Forward link the descriptor list */
+		for (i = 0, p = host->sg_cpu; i < host->ring_size - 1; i++, p++) {
+			p->des3 = cpu_to_le32(host->sg_dma +
+					(sizeof(struct idmac_desc) * (i + 1)));
+			p->des1 = 0;
+		}
+
+		/* Set the last descriptor as the end-of-ring descriptor */
+		p->des3 = cpu_to_le32(host->sg_dma);
+		p->des0 = cpu_to_le32(IDMAC_DES0_ER);
+	}
+
+	dw_mci_idmac_reset(host);
+
+	if (host->dma_64bit_address == 1) {
+		/* Mask out interrupts - get Tx & Rx complete only */
+		mci_writel(host, IDSTS64, IDMAC_INT_CLR);
+		mci_writel(host, IDINTEN64, SDMMC_IDMAC_INT_NI |
+				SDMMC_IDMAC_INT_RI | SDMMC_IDMAC_INT_TI);
+
+		/* Set the descriptor base address */
+		mci_writel(host, DBADDRL, host->sg_dma & 0xffffffff);
+		mci_writel(host, DBADDRU, (u64)host->sg_dma >> 32);
+
+	} else {
+		/* Mask out interrupts - get Tx & Rx complete only */
+		mci_writel(host, IDSTS, IDMAC_INT_CLR);
+		mci_writel(host, IDINTEN, SDMMC_IDMAC_INT_NI |
+				SDMMC_IDMAC_INT_RI | SDMMC_IDMAC_INT_TI);
+
+		/* Set the descriptor base address */
+		mci_writel(host, DBADDR, host->sg_dma);
+	}
+
+	return 0;
+}
+
+static const struct dw_mci_dma_ops dw_mci_idmac_ops = {
+	.init = dw_mci_idmac_init,
+	.start = dw_mci_idmac_start_dma,
+	.stop = dw_mci_idmac_stop_dma,
+	.complete = dw_mci_idmac_complete_dma,
+	.cleanup = dw_mci_dma_cleanup,
+};
+#endif /* CONFIG_MMC_DW_IDMAC */
+
+static int dw_mci_pre_dma_transfer(struct dw_mci *host,
+				   struct mmc_data *data,
+				   bool next)
+{
+	struct scatterlist *sg;
+	unsigned int i, sg_len;
+
+	if (!next && data->host_cookie)
+		return data->host_cookie;
+
+	/*
+	 * We don't do DMA on "complex" transfers, i.e. with
+	 * non-word-aligned buffers or lengths. Also, we don't bother
+	 * with all the DMA setup overhead for short transfers.
+	 */
+	if (data->blocks * data->blksz < DW_MCI_DMA_THRESHOLD)
+		return -EINVAL;
+
+	if (data->blksz & 3)
+		return -EINVAL;
+
+	for_each_sg(data->sg, sg, data->sg_len, i) {
+		if (sg->offset & 3 || sg->length & 3)
+			return -EINVAL;
+	}
+
+	sg_len = dma_map_sg(host->dev,
+			    data->sg,
+			    data->sg_len,
+			    dw_mci_get_dma_dir(data));
+	if (sg_len == 0)
+		return -EINVAL;
+
+	if (next)
+		data->host_cookie = sg_len;
+
+	return sg_len;
+}
+
+static void dw_mci_pre_req(struct mmc_host *mmc,
+			   struct mmc_request *mrq,
+			   bool is_first_req)
+{
+	struct dw_mci_slot *slot = mmc_priv(mmc);
+	struct mmc_data *data = mrq->data;
+
+	if (!slot->host->use_dma || !data)
+		return;
+
+	if (data->host_cookie) {
+		data->host_cookie = 0;
+		return;
+	}
+
+	if (dw_mci_pre_dma_transfer(slot->host, mrq->data, 1) < 0)
+		data->host_cookie = 0;
+}
+
+static void dw_mci_post_req(struct mmc_host *mmc,
+			    struct mmc_request *mrq,
+			    int err)
+{
+	struct dw_mci_slot *slot = mmc_priv(mmc);
+	struct mmc_data *data = mrq->data;
+
+	if (!slot->host->use_dma || !data)
+		return;
+
+	if (data->host_cookie)
+		dma_unmap_sg(slot->host->dev,
+			     data->sg,
+			     data->sg_len,
+			     dw_mci_get_dma_dir(data));
+	data->host_cookie = 0;
+}
+
+static void dw_mci_adjust_fifoth(struct dw_mci *host, struct mmc_data *data)
+{
+#ifdef CONFIG_MMC_DW_IDMAC
+	unsigned int blksz = data->blksz;
+	const u32 mszs[] = {1, 4, 8, 16, 32, 64, 128, 256};
+	u32 fifo_width = 1 << host->data_shift;
+	u32 blksz_depth = blksz / fifo_width, fifoth_val;
+	u32 msize = 0, rx_wmark = 1, tx_wmark, tx_wmark_invers;
+	int idx = (sizeof(mszs) / sizeof(mszs[0])) - 1;
+
+	tx_wmark = (host->fifo_depth) / 2;
+	tx_wmark_invers = host->fifo_depth - tx_wmark;
+
+	/*
+	 * MSIZE is '1',
+	 * if blksz is not a multiple of the FIFO width
+	 */
+	if (blksz % fifo_width) {
+		msize = 0;
+		rx_wmark = 1;
+		goto done;
+	}
+
+	do {
+		if (!((blksz_depth % mszs[idx]) ||
+		     (tx_wmark_invers % mszs[idx]))) {
+			msize = idx;
+			rx_wmark = mszs[idx] - 1;
+			break;
+		}
+	} while (--idx > 0);
+	/*
+	 * If idx is '0', it won't be tried
+	 * Thus, initial values are uesed
+	 */
+done:
+	fifoth_val = SDMMC_SET_FIFOTH(msize, rx_wmark, tx_wmark);
+	mci_writel(host, FIFOTH, fifoth_val);
+#endif
+}
+
+static void dw_mci_ctrl_rd_thld(struct dw_mci *host, struct mmc_data *data)
+{
+	unsigned int blksz = data->blksz;
+	u32 blksz_depth, fifo_depth;
+	u16 thld_size;
+
+	WARN_ON(!(data->flags & MMC_DATA_READ));
+
+	/*
+	 * CDTHRCTL doesn't exist prior to 240A (in fact that register offset is
+	 * in the FIFO region, so we really shouldn't access it).
+	 */
+	if (host->verid < DW_MMC_240A)
+		return;
+
+	if (host->timing != MMC_TIMING_MMC_HS200 &&
+	    host->timing != MMC_TIMING_MMC_HS400 &&
+	    host->timing != MMC_TIMING_UHS_SDR104)
+		goto disable;
+
+	blksz_depth = blksz / (1 << host->data_shift);
+	fifo_depth = host->fifo_depth;
+
+	if (blksz_depth > fifo_depth)
+		goto disable;
+
+	/*
+	 * If (blksz_depth) >= (fifo_depth >> 1), should be 'thld_size <= blksz'
+	 * If (blksz_depth) <  (fifo_depth >> 1), should be thld_size = blksz
+	 * Currently just choose blksz.
+	 */
+	thld_size = blksz;
+	mci_writel(host, CDTHRCTL, SDMMC_SET_RD_THLD(thld_size, 1));
+	return;
+
+disable:
+	mci_writel(host, CDTHRCTL, SDMMC_SET_RD_THLD(0, 0));
+}
+
+static int dw_mci_submit_data_dma(struct dw_mci *host, struct mmc_data *data)
+{
+	unsigned long irqflags;
+	int sg_len;
+	u32 temp;
+
+	host->using_dma = 0;
+
+	/* If we don't have a channel, we can't do DMA */
+	if (!host->use_dma)
+		return -ENODEV;
+
+	sg_len = dw_mci_pre_dma_transfer(host, data, 0);
+	if (sg_len < 0) {
+		host->dma_ops->stop(host);
+		return sg_len;
+	}
+
+	host->using_dma = 1;
+
+	dev_vdbg(host->dev,
+		 "sd sg_cpu: %#lx sg_dma: %#lx sg_len: %d\n",
+		 (unsigned long)host->sg_cpu, (unsigned long)host->sg_dma,
+		 sg_len);
+
+	/*
+	 * Decide the MSIZE and RX/TX Watermark.
+	 * If current block size is same with previous size,
+	 * no need to update fifoth.
+	 */
+	if (host->prev_blksz != data->blksz)
+		dw_mci_adjust_fifoth(host, data);
+
+	/* Enable the DMA interface */
+	temp = mci_readl(host, CTRL);
+	temp |= SDMMC_CTRL_DMA_ENABLE;
+	mci_writel(host, CTRL, temp);
+
+	/* Disable RX/TX IRQs, let DMA handle it */
+	spin_lock_irqsave(&host->irq_lock, irqflags);
+	temp = mci_readl(host, INTMASK);
+	temp  &= ~(SDMMC_INT_RXDR | SDMMC_INT_TXDR);
+	mci_writel(host, INTMASK, temp);
+	spin_unlock_irqrestore(&host->irq_lock, irqflags);
+
+	host->dma_ops->start(host, sg_len);
+
+	return 0;
+}
+
+static void dw_mci_submit_data(struct dw_mci *host, struct mmc_data *data)
+{
+	unsigned long irqflags;
+	u32 temp;
+
+	data->error = -EINPROGRESS;
+
+	WARN_ON(host->data);
+	host->sg = NULL;
+	host->data = data;
+
+	if (data->flags & MMC_DATA_READ) {
+		host->dir_status = DW_MCI_RECV_STATUS;
+		dw_mci_ctrl_rd_thld(host, data);
+	} else {
+		host->dir_status = DW_MCI_SEND_STATUS;
+	}
+
+	if (dw_mci_submit_data_dma(host, data)) {
+		int flags = SG_MITER_ATOMIC;
+		if (host->data->flags & MMC_DATA_READ)
+			flags |= SG_MITER_TO_SG;
+		else
+			flags |= SG_MITER_FROM_SG;
+
+		sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags);
+		host->sg = data->sg;
+		host->part_buf_start = 0;
+		host->part_buf_count = 0;
+
+		mci_writel(host, RINTSTS, SDMMC_INT_TXDR | SDMMC_INT_RXDR);
+
+		spin_lock_irqsave(&host->irq_lock, irqflags);
+		temp = mci_readl(host, INTMASK);
+		temp |= SDMMC_INT_TXDR | SDMMC_INT_RXDR;
+		mci_writel(host, INTMASK, temp);
+		spin_unlock_irqrestore(&host->irq_lock, irqflags);
+
+		temp = mci_readl(host, CTRL);
+		temp &= ~SDMMC_CTRL_DMA_ENABLE;
+		mci_writel(host, CTRL, temp);
+
+		/*
+		 * Use the initial fifoth_val for PIO mode.
+		 * If next issued data may be transfered by DMA mode,
+		 * prev_blksz should be invalidated.
+		 */
+		mci_writel(host, FIFOTH, host->fifoth_val);
+		host->prev_blksz = 0;
+	} else {
+		/*
+		 * Keep the current block size.
+		 * It will be used to decide whether to update
+		 * fifoth register next time.
+		 */
+		host->prev_blksz = data->blksz;
+	}
+}
+
+static void mci_send_cmd(struct dw_mci_slot *slot, u32 cmd, u32 arg)
+{
+	struct dw_mci *host = slot->host;
+	unsigned long timeout = jiffies + msecs_to_jiffies(500);
+	unsigned int cmd_status = 0;
+
+	mci_writel(host, CMDARG, arg);
+	wmb();
+	dw_mci_wait_while_busy(host, cmd);
+	mci_writel(host, CMD, SDMMC_CMD_START | cmd);
+
+	while (time_before(jiffies, timeout)) {
+		cmd_status = mci_readl(host, CMD);
+		if (!(cmd_status & SDMMC_CMD_START))
+			return;
+	}
+	dev_err(&slot->mmc->class_dev,
+		"Timeout sending command (cmd %#x arg %#x status %#x)\n",
+		cmd, arg, cmd_status);
+}
+
+static void dw_mci_setup_bus(struct dw_mci_slot *slot, bool force_clkinit)
+{
+	struct dw_mci *host = slot->host;
+	unsigned int clock = slot->clock;
+	u32 div;
+	u32 clk_en_a;
+	u32 sdmmc_cmd_bits = SDMMC_CMD_UPD_CLK | SDMMC_CMD_PRV_DAT_WAIT;
+
+	/* We must continue to set bit 28 in CMD until the change is complete */
+	if (host->state == STATE_WAITING_CMD11_DONE)
+		sdmmc_cmd_bits |= SDMMC_CMD_VOLT_SWITCH;
+
+	if (!clock) {
+		mci_writel(host, CLKENA, 0);
+		mci_send_cmd(slot, sdmmc_cmd_bits, 0);
+	} else if (clock != host->current_speed || force_clkinit) {
+		div = host->bus_hz / clock;
+		if (host->bus_hz % clock && host->bus_hz > clock)
+			/*
+			 * move the + 1 after the divide to prevent
+			 * over-clocking the card.
+			 */
+			div += 1;
+
+		div = (host->bus_hz != clock) ? DIV_ROUND_UP(div, 2) : 0;
+
+		if ((clock << div) != slot->__clk_old || force_clkinit)
+			dev_info(&slot->mmc->class_dev,
+				 "Bus speed (slot %d) = %dHz (slot req %dHz, actual %dHZ div = %d)\n",
+				 slot->id, host->bus_hz, clock,
+				 div ? ((host->bus_hz / div) >> 1) :
+				 host->bus_hz, div);
+
+		/* disable clock */
+		mci_writel(host, CLKENA, 0);
+		mci_writel(host, CLKSRC, 0);
+
+		/* inform CIU */
+		mci_send_cmd(slot, sdmmc_cmd_bits, 0);
+
+		/* set clock to desired speed */
+		mci_writel(host, CLKDIV, div);
+
+		/* inform CIU */
+		mci_send_cmd(slot, sdmmc_cmd_bits, 0);
+
+		/* enable clock; only low power if no SDIO */
+		clk_en_a = SDMMC_CLKEN_ENABLE << slot->id;
+		if (!test_bit(DW_MMC_CARD_NO_LOW_PWR, &slot->flags))
+			clk_en_a |= SDMMC_CLKEN_LOW_PWR << slot->id;
+		mci_writel(host, CLKENA, clk_en_a);
+
+		/* inform CIU */
+		mci_send_cmd(slot, sdmmc_cmd_bits, 0);
+
+		/* keep the clock with reflecting clock dividor */
+		slot->__clk_old = clock << div;
+	}
+
+	host->current_speed = clock;
+
+	/* Set the current slot bus width */
+	mci_writel(host, CTYPE, (slot->ctype << slot->id));
+}
+
+static void __dw_mci_start_request(struct dw_mci *host,
+				   struct dw_mci_slot *slot,
+				   struct mmc_command *cmd)
+{
+	struct mmc_request *mrq;
+	struct mmc_data	*data;
+	u32 cmdflags;
+
+	mrq = slot->mrq;
+
+	host->cur_slot = slot;
+	host->mrq = mrq;
+
+	host->pending_events = 0;
+	host->completed_events = 0;
+	host->cmd_status = 0;
+	host->data_status = 0;
+	host->dir_status = 0;
+
+	data = cmd->data;
+	if (data) {
+		mci_writel(host, TMOUT, 0xFFFFFFFF);
+		mci_writel(host, BYTCNT, data->blksz*data->blocks);
+		mci_writel(host, BLKSIZ, data->blksz);
+	}
+
+	cmdflags = dw_mci_prepare_command(slot->mmc, cmd);
+
+	/* this is the first command, send the initialization clock */
+	if (test_and_clear_bit(DW_MMC_CARD_NEED_INIT, &slot->flags))
+		cmdflags |= SDMMC_CMD_INIT;
+
+	if (data) {
+		dw_mci_submit_data(host, data);
+		wmb();
+	}
+
+	dw_mci_start_command(host, cmd, cmdflags);
+
+	if (cmd->opcode == SD_SWITCH_VOLTAGE) {
+		unsigned long irqflags;
+
+		/*
+		 * Databook says to fail after 2ms w/ no response, but evidence
+		 * shows that sometimes the cmd11 interrupt takes over 130ms.
+		 * We'll set to 500ms, plus an extra jiffy just in case jiffies
+		 * is just about to roll over.
+		 *
+		 * We do this whole thing under spinlock and only if the
+		 * command hasn't already completed (indicating the the irq
+		 * already ran so we don't want the timeout).
+		 */
+		spin_lock_irqsave(&host->irq_lock, irqflags);
+		if (!test_bit(EVENT_CMD_COMPLETE, &host->pending_events))
+			mod_timer(&host->cmd11_timer,
+				jiffies + msecs_to_jiffies(500) + 1);
+		spin_unlock_irqrestore(&host->irq_lock, irqflags);
+	}
+
+	if (mrq->stop)
+		host->stop_cmdr = dw_mci_prepare_command(slot->mmc, mrq->stop);
+	else
+		host->stop_cmdr = dw_mci_prep_stop_abort(host, cmd);
+}
+
+static void dw_mci_start_request(struct dw_mci *host,
+				 struct dw_mci_slot *slot)
+{
+	struct mmc_request *mrq = slot->mrq;
+	struct mmc_command *cmd;
+
+	cmd = mrq->sbc ? mrq->sbc : mrq->cmd;
+	__dw_mci_start_request(host, slot, cmd);
+}
+
+/* must be called with host->lock held */
+static void dw_mci_queue_request(struct dw_mci *host, struct dw_mci_slot *slot,
+				 struct mmc_request *mrq)
+{
+	dev_vdbg(&slot->mmc->class_dev, "queue request: state=%d\n",
+		 host->state);
+
+	slot->mrq = mrq;
+
+	if (host->state == STATE_WAITING_CMD11_DONE) {
+		dev_warn(&slot->mmc->class_dev,
+			 "Voltage change didn't complete\n");
+		/*
+		 * this case isn't expected to happen, so we can
+		 * either crash here or just try to continue on
+		 * in the closest possible state
+		 */
+		host->state = STATE_IDLE;
+	}
+
+	if (host->state == STATE_IDLE) {
+		host->state = STATE_SENDING_CMD;
+		dw_mci_start_request(host, slot);
+	} else {
+		list_add_tail(&slot->queue_node, &host->queue);
+	}
+}
+
+static void dw_mci_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+	struct dw_mci_slot *slot = mmc_priv(mmc);
+	struct dw_mci *host = slot->host;
+
+	WARN_ON(slot->mrq);
+
+	/*
+	 * The check for card presence and queueing of the request must be
+	 * atomic, otherwise the card could be removed in between and the
+	 * request wouldn't fail until another card was inserted.
+	 */
+	spin_lock_bh(&host->lock);
+
+	if (!test_bit(DW_MMC_CARD_PRESENT, &slot->flags)) {
+		spin_unlock_bh(&host->lock);
+		mrq->cmd->error = -ENOMEDIUM;
+		mmc_request_done(mmc, mrq);
+		return;
+	}
+
+	dw_mci_queue_request(host, slot, mrq);
+
+	spin_unlock_bh(&host->lock);
+}
+
+static void dw_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+	struct dw_mci_slot *slot = mmc_priv(mmc);
+	const struct dw_mci_drv_data *drv_data = slot->host->drv_data;
+	u32 regs;
+	int ret;
+
+	switch (ios->bus_width) {
+	case MMC_BUS_WIDTH_4:
+		slot->ctype = SDMMC_CTYPE_4BIT;
+		break;
+	case MMC_BUS_WIDTH_8:
+		slot->ctype = SDMMC_CTYPE_8BIT;
+		break;
+	default:
+		/* set default 1 bit mode */
+		slot->ctype = SDMMC_CTYPE_1BIT;
+	}
+
+	regs = mci_readl(slot->host, UHS_REG);
+
+	/* DDR mode set */
+	if (ios->timing == MMC_TIMING_MMC_DDR52 ||
+	    ios->timing == MMC_TIMING_MMC_HS400)
+		regs |= ((0x1 << slot->id) << 16);
+	else
+		regs &= ~((0x1 << slot->id) << 16);
+
+	mci_writel(slot->host, UHS_REG, regs);
+	slot->host->timing = ios->timing;
+
+	/*
+	 * Use mirror of ios->clock to prevent race with mmc
+	 * core ios update when finding the minimum.
+	 */
+	slot->clock = ios->clock;
+
+	if (drv_data && drv_data->set_ios)
+		drv_data->set_ios(slot->host, ios);
+
+	switch (ios->power_mode) {
+	case MMC_POWER_UP:
+		if (!IS_ERR(mmc->supply.vmmc)) {
+			ret = mmc_regulator_set_ocr(mmc, mmc->supply.vmmc,
+					ios->vdd);
+			if (ret) {
+				dev_err(slot->host->dev,
+					"failed to enable vmmc regulator\n");
+				/*return, if failed turn on vmmc*/
+				return;
+			}
+		}
+		set_bit(DW_MMC_CARD_NEED_INIT, &slot->flags);
+		regs = mci_readl(slot->host, PWREN);
+		regs |= (1 << slot->id);
+		mci_writel(slot->host, PWREN, regs);
+		break;
+	case MMC_POWER_ON:
+		if (!slot->host->vqmmc_enabled) {
+			if (!IS_ERR(mmc->supply.vqmmc)) {
+				ret = regulator_enable(mmc->supply.vqmmc);
+				if (ret < 0)
+					dev_err(slot->host->dev,
+						"failed to enable vqmmc\n");
+				else
+					slot->host->vqmmc_enabled = true;
+
+			} else {
+				/* Keep track so we don't reset again */
+				slot->host->vqmmc_enabled = true;
+			}
+
+			/* Reset our state machine after powering on */
+			dw_mci_ctrl_reset(slot->host,
+					  SDMMC_CTRL_ALL_RESET_FLAGS);
+		}
+
+		/* Adjust clock / bus width after power is up */
+		dw_mci_setup_bus(slot, false);
+
+		break;
+	case MMC_POWER_OFF:
+		/* Turn clock off before power goes down */
+		dw_mci_setup_bus(slot, false);
+
+		if (!IS_ERR(mmc->supply.vmmc))
+			mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
+
+		if (!IS_ERR(mmc->supply.vqmmc) && slot->host->vqmmc_enabled)
+			regulator_disable(mmc->supply.vqmmc);
+		slot->host->vqmmc_enabled = false;
+
+		regs = mci_readl(slot->host, PWREN);
+		regs &= ~(1 << slot->id);
+		mci_writel(slot->host, PWREN, regs);
+		break;
+	default:
+		break;
+	}
+
+	if (slot->host->state == STATE_WAITING_CMD11_DONE && ios->clock != 0)
+		slot->host->state = STATE_IDLE;
+}
+
+static int dw_mci_card_busy(struct mmc_host *mmc)
+{
+	struct dw_mci_slot *slot = mmc_priv(mmc);
+	u32 status;
+
+	/*
+	 * Check the busy bit which is low when DAT[3:0]
+	 * (the data lines) are 0000
+	 */
+	status = mci_readl(slot->host, STATUS);
+
+	return !!(status & SDMMC_STATUS_BUSY);
+}
+
+static int dw_mci_switch_voltage(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+	struct dw_mci_slot *slot = mmc_priv(mmc);
+	struct dw_mci *host = slot->host;
+	u32 uhs;
+	u32 v18 = SDMMC_UHS_18V << slot->id;
+	int min_uv, max_uv;
+	int ret;
+
+	/*
+	 * Program the voltage.  Note that some instances of dw_mmc may use
+	 * the UHS_REG for this.  For other instances (like exynos) the UHS_REG
+	 * does no harm but you need to set the regulator directly.  Try both.
+	 */
+	uhs = mci_readl(host, UHS_REG);
+	if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330) {
+		min_uv = 2700000;
+		max_uv = 3600000;
+		uhs &= ~v18;
+	} else {
+		min_uv = 1700000;
+		max_uv = 1950000;
+		uhs |= v18;
+	}
+	if (!IS_ERR(mmc->supply.vqmmc)) {
+		ret = regulator_set_voltage(mmc->supply.vqmmc, min_uv, max_uv);
+
+		if (ret) {
+			dev_dbg(&mmc->class_dev,
+					 "Regulator set error %d: %d - %d\n",
+					 ret, min_uv, max_uv);
+			return ret;
+		}
+	}
+	mci_writel(host, UHS_REG, uhs);
+
+	return 0;
+}
+
+static int dw_mci_get_ro(struct mmc_host *mmc)
+{
+	int read_only;
+	struct dw_mci_slot *slot = mmc_priv(mmc);
+	int gpio_ro = mmc_gpio_get_ro(mmc);
+
+	/* Use platform get_ro function, else try on board write protect */
+	if ((slot->quirks & DW_MCI_SLOT_QUIRK_NO_WRITE_PROTECT) ||
+			(slot->host->quirks & DW_MCI_QUIRK_NO_WRITE_PROTECT))
+		read_only = 0;
+	else if (!IS_ERR_VALUE(gpio_ro))
+		read_only = gpio_ro;
+	else
+		read_only =
+			mci_readl(slot->host, WRTPRT) & (1 << slot->id) ? 1 : 0;
+
+	dev_dbg(&mmc->class_dev, "card is %s\n",
+		read_only ? "read-only" : "read-write");
+
+	return read_only;
+}
+
+static int dw_mci_get_cd(struct mmc_host *mmc)
+{
+	int present;
+	struct dw_mci_slot *slot = mmc_priv(mmc);
+	struct dw_mci_board *brd = slot->host->pdata;
+	struct dw_mci *host = slot->host;
+	int gpio_cd = mmc_gpio_get_cd(mmc);
+
+	/* Use platform get_cd function, else try onboard card detect */
+	if ((brd->quirks & DW_MCI_QUIRK_BROKEN_CARD_DETECTION) ||
+	    (mmc->caps & MMC_CAP_NONREMOVABLE))
+		present = 1;
+	else if (!IS_ERR_VALUE(gpio_cd))
+		present = gpio_cd;
+	else
+		present = (mci_readl(slot->host, CDETECT) & (1 << slot->id))
+			== 0 ? 1 : 0;
+
+	spin_lock_bh(&host->lock);
+	if (present) {
+		set_bit(DW_MMC_CARD_PRESENT, &slot->flags);
+		dev_dbg(&mmc->class_dev, "card is present\n");
+	} else {
+		clear_bit(DW_MMC_CARD_PRESENT, &slot->flags);
+		dev_dbg(&mmc->class_dev, "card is not present\n");
+	}
+	spin_unlock_bh(&host->lock);
+
+	return present;
+}
+
+static void dw_mci_init_card(struct mmc_host *mmc, struct mmc_card *card)
+{
+	struct dw_mci_slot *slot = mmc_priv(mmc);
+	struct dw_mci *host = slot->host;
+
+	/*
+	 * Low power mode will stop the card clock when idle.  According to the
+	 * description of the CLKENA register we should disable low power mode
+	 * for SDIO cards if we need SDIO interrupts to work.
+	 */
+	if (mmc->caps & MMC_CAP_SDIO_IRQ) {
+		const u32 clken_low_pwr = SDMMC_CLKEN_LOW_PWR << slot->id;
+		u32 clk_en_a_old;
+		u32 clk_en_a;
+
+		clk_en_a_old = mci_readl(host, CLKENA);
+
+		if (card->type == MMC_TYPE_SDIO ||
+		    card->type == MMC_TYPE_SD_COMBO) {
+			set_bit(DW_MMC_CARD_NO_LOW_PWR, &slot->flags);
+			clk_en_a = clk_en_a_old & ~clken_low_pwr;
+		} else {
+			clear_bit(DW_MMC_CARD_NO_LOW_PWR, &slot->flags);
+			clk_en_a = clk_en_a_old | clken_low_pwr;
+		}
+
+		if (clk_en_a != clk_en_a_old) {
+			mci_writel(host, CLKENA, clk_en_a);
+			mci_send_cmd(slot, SDMMC_CMD_UPD_CLK |
+				     SDMMC_CMD_PRV_DAT_WAIT, 0);
+		}
+	}
+}
+
+static void dw_mci_enable_sdio_irq(struct mmc_host *mmc, int enb)
+{
+	struct dw_mci_slot *slot = mmc_priv(mmc);
+	struct dw_mci *host = slot->host;
+	unsigned long irqflags;
+	u32 int_mask;
+
+	spin_lock_irqsave(&host->irq_lock, irqflags);
+
+	/* Enable/disable Slot Specific SDIO interrupt */
+	int_mask = mci_readl(host, INTMASK);
+	if (enb)
+		int_mask |= SDMMC_INT_SDIO(slot->sdio_id);
+	else
+		int_mask &= ~SDMMC_INT_SDIO(slot->sdio_id);
+	mci_writel(host, INTMASK, int_mask);
+
+	spin_unlock_irqrestore(&host->irq_lock, irqflags);
+}
+
+static int dw_mci_execute_tuning(struct mmc_host *mmc, u32 opcode)
+{
+	struct dw_mci_slot *slot = mmc_priv(mmc);
+	struct dw_mci *host = slot->host;
+	const struct dw_mci_drv_data *drv_data = host->drv_data;
+	int err = -ENOSYS;
+
+	if (drv_data && drv_data->execute_tuning)
+		err = drv_data->execute_tuning(slot);
+	return err;
+}
+
+static int dw_mci_prepare_hs400_tuning(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+	struct dw_mci_slot *slot = mmc_priv(mmc);
+	struct dw_mci *host = slot->host;
+	const struct dw_mci_drv_data *drv_data = host->drv_data;
+
+	if (drv_data && drv_data->prepare_hs400_tuning)
+		return drv_data->prepare_hs400_tuning(host, ios);
+
+	return 0;
+}
+
+static const struct mmc_host_ops dw_mci_ops = {
+	.request		= dw_mci_request,
+	.pre_req		= dw_mci_pre_req,
+	.post_req		= dw_mci_post_req,
+	.set_ios		= dw_mci_set_ios,
+	.get_ro			= dw_mci_get_ro,
+	.get_cd			= dw_mci_get_cd,
+	.enable_sdio_irq	= dw_mci_enable_sdio_irq,
+	.execute_tuning		= dw_mci_execute_tuning,
+	.card_busy		= dw_mci_card_busy,
+	.start_signal_voltage_switch = dw_mci_switch_voltage,
+	.init_card		= dw_mci_init_card,
+	.prepare_hs400_tuning	= dw_mci_prepare_hs400_tuning,
+};
+
+static void dw_mci_request_end(struct dw_mci *host, struct mmc_request *mrq)
+	__releases(&host->lock)
+	__acquires(&host->lock)
+{
+	struct dw_mci_slot *slot;
+	struct mmc_host	*prev_mmc = host->cur_slot->mmc;
+
+	WARN_ON(host->cmd || host->data);
+
+	host->cur_slot->mrq = NULL;
+	host->mrq = NULL;
+	if (!list_empty(&host->queue)) {
+		slot = list_entry(host->queue.next,
+				  struct dw_mci_slot, queue_node);
+		list_del(&slot->queue_node);
+		dev_vdbg(host->dev, "list not empty: %s is next\n",
+			 mmc_hostname(slot->mmc));
+		host->state = STATE_SENDING_CMD;
+		dw_mci_start_request(host, slot);
+	} else {
+		dev_vdbg(host->dev, "list empty\n");
+
+		if (host->state == STATE_SENDING_CMD11)
+			host->state = STATE_WAITING_CMD11_DONE;
+		else
+			host->state = STATE_IDLE;
+	}
+
+	spin_unlock(&host->lock);
+	mmc_request_done(prev_mmc, mrq);
+	spin_lock(&host->lock);
+}
+
+static int dw_mci_command_complete(struct dw_mci *host, struct mmc_command *cmd)
+{
+	u32 status = host->cmd_status;
+
+	host->cmd_status = 0;
+
+	/* Read the response from the card (up to 16 bytes) */
+	if (cmd->flags & MMC_RSP_PRESENT) {
+		if (cmd->flags & MMC_RSP_136) {
+			cmd->resp[3] = mci_readl(host, RESP0);
+			cmd->resp[2] = mci_readl(host, RESP1);
+			cmd->resp[1] = mci_readl(host, RESP2);
+			cmd->resp[0] = mci_readl(host, RESP3);
+		} else {
+			cmd->resp[0] = mci_readl(host, RESP0);
+			cmd->resp[1] = 0;
+			cmd->resp[2] = 0;
+			cmd->resp[3] = 0;
+		}
+	}
+
+	if (status & SDMMC_INT_RTO)
+		cmd->error = -ETIMEDOUT;
+	else if ((cmd->flags & MMC_RSP_CRC) && (status & SDMMC_INT_RCRC))
+		cmd->error = -EILSEQ;
+	else if (status & SDMMC_INT_RESP_ERR)
+		cmd->error = -EIO;
+	else
+		cmd->error = 0;
+
+	if (cmd->error) {
+		/* newer ip versions need a delay between retries */
+		if (host->quirks & DW_MCI_QUIRK_RETRY_DELAY)
+			mdelay(20);
+	}
+
+	return cmd->error;
+}
+
+static int dw_mci_data_complete(struct dw_mci *host, struct mmc_data *data)
+{
+	u32 status = host->data_status;
+
+	if (status & DW_MCI_DATA_ERROR_FLAGS) {
+		if (status & SDMMC_INT_DRTO) {
+			data->error = -ETIMEDOUT;
+		} else if (status & SDMMC_INT_DCRC) {
+			data->error = -EILSEQ;
+		} else if (status & SDMMC_INT_EBE) {
+			if (host->dir_status ==
+				DW_MCI_SEND_STATUS) {
+				/*
+				 * No data CRC status was returned.
+				 * The number of bytes transferred
+				 * will be exaggerated in PIO mode.
+				 */
+				data->bytes_xfered = 0;
+				data->error = -ETIMEDOUT;
+			} else if (host->dir_status ==
+					DW_MCI_RECV_STATUS) {
+				data->error = -EIO;
+			}
+		} else {
+			/* SDMMC_INT_SBE is included */
+			data->error = -EIO;
+		}
+
+		dev_dbg(host->dev, "data error, status 0x%08x\n", status);
+
+		/*
+		 * After an error, there may be data lingering
+		 * in the FIFO
+		 */
+		dw_mci_reset(host);
+	} else {
+		data->bytes_xfered = data->blocks * data->blksz;
+		data->error = 0;
+	}
+
+	return data->error;
+}
+
+static void dw_mci_tasklet_func(unsigned long priv)
+{
+	struct dw_mci *host = (struct dw_mci *)priv;
+	struct mmc_data	*data;
+	struct mmc_command *cmd;
+	struct mmc_request *mrq;
+	enum dw_mci_state state;
+	enum dw_mci_state prev_state;
+	unsigned int err;
+
+	spin_lock(&host->lock);
+
+	state = host->state;
+	data = host->data;
+	mrq = host->mrq;
+
+	do {
+		prev_state = state;
+
+		switch (state) {
+		case STATE_IDLE:
+		case STATE_WAITING_CMD11_DONE:
+			break;
+
+		case STATE_SENDING_CMD11:
+		case STATE_SENDING_CMD:
+			if (!test_and_clear_bit(EVENT_CMD_COMPLETE,
+						&host->pending_events))
+				break;
+
+			cmd = host->cmd;
+			host->cmd = NULL;
+			set_bit(EVENT_CMD_COMPLETE, &host->completed_events);
+			err = dw_mci_command_complete(host, cmd);
+			if (cmd == mrq->sbc && !err) {
+				prev_state = state = STATE_SENDING_CMD;
+				__dw_mci_start_request(host, host->cur_slot,
+						       mrq->cmd);
+				goto unlock;
+			}
+
+			if (cmd->data && err) {
+				dw_mci_stop_dma(host);
+				send_stop_abort(host, data);
+				state = STATE_SENDING_STOP;
+				break;
+			}
+
+			if (!cmd->data || err) {
+				dw_mci_request_end(host, mrq);
+				goto unlock;
+			}
+
+			prev_state = state = STATE_SENDING_DATA;
+			/* fall through */
+
+		case STATE_SENDING_DATA:
+			/*
+			 * We could get a data error and never a transfer
+			 * complete so we'd better check for it here.
+			 *
+			 * Note that we don't really care if we also got a
+			 * transfer complete; stopping the DMA and sending an
+			 * abort won't hurt.
+			 */
+			if (test_and_clear_bit(EVENT_DATA_ERROR,
+					       &host->pending_events)) {
+				dw_mci_stop_dma(host);
+				if (data->stop ||
+				    !(host->data_status & (SDMMC_INT_DRTO |
+							   SDMMC_INT_EBE)))
+					send_stop_abort(host, data);
+				state = STATE_DATA_ERROR;
+				break;
+			}
+
+			if (!test_and_clear_bit(EVENT_XFER_COMPLETE,
+						&host->pending_events))
+				break;
+
+			set_bit(EVENT_XFER_COMPLETE, &host->completed_events);
+
+			/*
+			 * Handle an EVENT_DATA_ERROR that might have shown up
+			 * before the transfer completed.  This might not have
+			 * been caught by the check above because the interrupt
+			 * could have gone off between the previous check and
+			 * the check for transfer complete.
+			 *
+			 * Technically this ought not be needed assuming we
+			 * get a DATA_COMPLETE eventually (we'll notice the
+			 * error and end the request), but it shouldn't hurt.
+			 *
+			 * This has the advantage of sending the stop command.
+			 */
+			if (test_and_clear_bit(EVENT_DATA_ERROR,
+					       &host->pending_events)) {
+				dw_mci_stop_dma(host);
+				if (data->stop ||
+				    !(host->data_status & (SDMMC_INT_DRTO |
+							   SDMMC_INT_EBE)))
+					send_stop_abort(host, data);
+				state = STATE_DATA_ERROR;
+				break;
+			}
+			prev_state = state = STATE_DATA_BUSY;
+
+			/* fall through */
+
+		case STATE_DATA_BUSY:
+			if (!test_and_clear_bit(EVENT_DATA_COMPLETE,
+						&host->pending_events))
+				break;
+
+			host->data = NULL;
+			set_bit(EVENT_DATA_COMPLETE, &host->completed_events);
+			err = dw_mci_data_complete(host, data);
+
+			if (!err) {
+				if (!data->stop || mrq->sbc) {
+					if (mrq->sbc && data->stop)
+						data->stop->error = 0;
+					dw_mci_request_end(host, mrq);
+					goto unlock;
+				}
+
+				/* stop command for open-ended transfer*/
+				if (data->stop)
+					send_stop_abort(host, data);
+			} else {
+				/*
+				 * If we don't have a command complete now we'll
+				 * never get one since we just reset everything;
+				 * better end the request.
+				 *
+				 * If we do have a command complete we'll fall
+				 * through to the SENDING_STOP command and
+				 * everything will be peachy keen.
+				 */
+				if (!test_bit(EVENT_CMD_COMPLETE,
+					      &host->pending_events)) {
+					host->cmd = NULL;
+					dw_mci_request_end(host, mrq);
+					goto unlock;
+				}
+			}
+
+			/*
+			 * If err has non-zero,
+			 * stop-abort command has been already issued.
+			 */
+			prev_state = state = STATE_SENDING_STOP;
+
+			/* fall through */
+
+		case STATE_SENDING_STOP:
+			if (!test_and_clear_bit(EVENT_CMD_COMPLETE,
+						&host->pending_events))
+				break;
+
+			/* CMD error in data command */
+			if (mrq->cmd->error && mrq->data)
+				dw_mci_reset(host);
+
+			host->cmd = NULL;
+			host->data = NULL;
+
+			if (mrq->stop)
+				dw_mci_command_complete(host, mrq->stop);
+			else
+				host->cmd_status = 0;
+
+			dw_mci_request_end(host, mrq);
+			goto unlock;
+
+		case STATE_DATA_ERROR:
+			if (!test_and_clear_bit(EVENT_XFER_COMPLETE,
+						&host->pending_events))
+				break;
+
+			state = STATE_DATA_BUSY;
+			break;
+		}
+	} while (state != prev_state);
+
+	host->state = state;
+unlock:
+	spin_unlock(&host->lock);
+
+}
+
+/* push final bytes to part_buf, only use during push */
+static void dw_mci_set_part_bytes(struct dw_mci *host, void *buf, int cnt)
+{
+	memcpy((void *)&host->part_buf, buf, cnt);
+	host->part_buf_count = cnt;
+}
+
+/* append bytes to part_buf, only use during push */
+static int dw_mci_push_part_bytes(struct dw_mci *host, void *buf, int cnt)
+{
+	cnt = min(cnt, (1 << host->data_shift) - host->part_buf_count);
+	memcpy((void *)&host->part_buf + host->part_buf_count, buf, cnt);
+	host->part_buf_count += cnt;
+	return cnt;
+}
+
+/* pull first bytes from part_buf, only use during pull */
+static int dw_mci_pull_part_bytes(struct dw_mci *host, void *buf, int cnt)
+{
+	cnt = min(cnt, (int)host->part_buf_count);
+	if (cnt) {
+		memcpy(buf, (void *)&host->part_buf + host->part_buf_start,
+		       cnt);
+		host->part_buf_count -= cnt;
+		host->part_buf_start += cnt;
+	}
+	return cnt;
+}
+
+/* pull final bytes from the part_buf, assuming it's just been filled */
+static void dw_mci_pull_final_bytes(struct dw_mci *host, void *buf, int cnt)
+{
+	memcpy(buf, &host->part_buf, cnt);
+	host->part_buf_start = cnt;
+	host->part_buf_count = (1 << host->data_shift) - cnt;
+}
+
+static void dw_mci_push_data16(struct dw_mci *host, void *buf, int cnt)
+{
+	struct mmc_data *data = host->data;
+	int init_cnt = cnt;
+
+	/* try and push anything in the part_buf */
+	if (unlikely(host->part_buf_count)) {
+		int len = dw_mci_push_part_bytes(host, buf, cnt);
+		buf += len;
+		cnt -= len;
+		if (host->part_buf_count == 2) {
+			mci_fifo_writew(host->fifo_reg, host->part_buf16);
+			host->part_buf_count = 0;
+		}
+	}
+#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
+	if (unlikely((unsigned long)buf & 0x1)) {
+		while (cnt >= 2) {
+			u16 aligned_buf[64];
+			int len = min(cnt & -2, (int)sizeof(aligned_buf));
+			int items = len >> 1;
+			int i;
+			/* memcpy from input buffer into aligned buffer */
+			memcpy(aligned_buf, buf, len);
+			buf += len;
+			cnt -= len;
+			/* push data from aligned buffer into fifo */
+			for (i = 0; i < items; ++i)
+				mci_fifo_writew(host->fifo_reg, aligned_buf[i]);
+		}
+	} else
+#endif
+	{
+		u16 *pdata = buf;
+		for (; cnt >= 2; cnt -= 2)
+			mci_fifo_writew(host->fifo_reg, *pdata++);
+		buf = pdata;
+	}
+	/* put anything remaining in the part_buf */
+	if (cnt) {
+		dw_mci_set_part_bytes(host, buf, cnt);
+		 /* Push data if we have reached the expected data length */
+		if ((data->bytes_xfered + init_cnt) ==
+		    (data->blksz * data->blocks))
+			mci_fifo_writew(host->fifo_reg, host->part_buf16);
+	}
+}
+
+static void dw_mci_pull_data16(struct dw_mci *host, void *buf, int cnt)
+{
+#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
+	if (unlikely((unsigned long)buf & 0x1)) {
+		while (cnt >= 2) {
+			/* pull data from fifo into aligned buffer */
+			u16 aligned_buf[64];
+			int len = min(cnt & -2, (int)sizeof(aligned_buf));
+			int items = len >> 1;
+			int i;
+			for (i = 0; i < items; ++i)
+				aligned_buf[i] = mci_fifo_readw(host->fifo_reg);
+			/* memcpy from aligned buffer into output buffer */
+			memcpy(buf, aligned_buf, len);
+			buf += len;
+			cnt -= len;
+		}
+	} else
+#endif
+	{
+		u16 *pdata = buf;
+		for (; cnt >= 2; cnt -= 2)
+			*pdata++ = mci_fifo_readw(host->fifo_reg);
+		buf = pdata;
+	}
+	if (cnt) {
+		host->part_buf16 = mci_fifo_readw(host->fifo_reg);
+		dw_mci_pull_final_bytes(host, buf, cnt);
+	}
+}
+
+static void dw_mci_push_data32(struct dw_mci *host, void *buf, int cnt)
+{
+	struct mmc_data *data = host->data;
+	int init_cnt = cnt;
+
+	/* try and push anything in the part_buf */
+	if (unlikely(host->part_buf_count)) {
+		int len = dw_mci_push_part_bytes(host, buf, cnt);
+		buf += len;
+		cnt -= len;
+		if (host->part_buf_count == 4) {
+			mci_fifo_writel(host->fifo_reg,	host->part_buf32);
+			host->part_buf_count = 0;
+		}
+	}
+#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
+	if (unlikely((unsigned long)buf & 0x3)) {
+		while (cnt >= 4) {
+			u32 aligned_buf[32];
+			int len = min(cnt & -4, (int)sizeof(aligned_buf));
+			int items = len >> 2;
+			int i;
+			/* memcpy from input buffer into aligned buffer */
+			memcpy(aligned_buf, buf, len);
+			buf += len;
+			cnt -= len;
+			/* push data from aligned buffer into fifo */
+			for (i = 0; i < items; ++i)
+				mci_fifo_writel(host->fifo_reg,	aligned_buf[i]);
+		}
+	} else
+#endif
+	{
+		u32 *pdata = buf;
+		for (; cnt >= 4; cnt -= 4)
+			mci_fifo_writel(host->fifo_reg, *pdata++);
+		buf = pdata;
+	}
+	/* put anything remaining in the part_buf */
+	if (cnt) {
+		dw_mci_set_part_bytes(host, buf, cnt);
+		 /* Push data if we have reached the expected data length */
+		if ((data->bytes_xfered + init_cnt) ==
+		    (data->blksz * data->blocks))
+			mci_fifo_writel(host->fifo_reg, host->part_buf32);
+	}
+}
+
+static void dw_mci_pull_data32(struct dw_mci *host, void *buf, int cnt)
+{
+#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
+	if (unlikely((unsigned long)buf & 0x3)) {
+		while (cnt >= 4) {
+			/* pull data from fifo into aligned buffer */
+			u32 aligned_buf[32];
+			int len = min(cnt & -4, (int)sizeof(aligned_buf));
+			int items = len >> 2;
+			int i;
+			for (i = 0; i < items; ++i)
+				aligned_buf[i] = mci_fifo_readl(host->fifo_reg);
+			/* memcpy from aligned buffer into output buffer */
+			memcpy(buf, aligned_buf, len);
+			buf += len;
+			cnt -= len;
+		}
+	} else
+#endif
+	{
+		u32 *pdata = buf;
+		for (; cnt >= 4; cnt -= 4)
+			*pdata++ = mci_fifo_readl(host->fifo_reg);
+		buf = pdata;
+	}
+	if (cnt) {
+		host->part_buf32 = mci_fifo_readl(host->fifo_reg);
+		dw_mci_pull_final_bytes(host, buf, cnt);
+	}
+}
+
+static void dw_mci_push_data64(struct dw_mci *host, void *buf, int cnt)
+{
+	struct mmc_data *data = host->data;
+	int init_cnt = cnt;
+
+	/* try and push anything in the part_buf */
+	if (unlikely(host->part_buf_count)) {
+		int len = dw_mci_push_part_bytes(host, buf, cnt);
+		buf += len;
+		cnt -= len;
+
+		if (host->part_buf_count == 8) {
+			mci_fifo_writeq(host->fifo_reg,	host->part_buf);
+			host->part_buf_count = 0;
+		}
+	}
+#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
+	if (unlikely((unsigned long)buf & 0x7)) {
+		while (cnt >= 8) {
+			u64 aligned_buf[16];
+			int len = min(cnt & -8, (int)sizeof(aligned_buf));
+			int items = len >> 3;
+			int i;
+			/* memcpy from input buffer into aligned buffer */
+			memcpy(aligned_buf, buf, len);
+			buf += len;
+			cnt -= len;
+			/* push data from aligned buffer into fifo */
+			for (i = 0; i < items; ++i)
+				mci_fifo_writeq(host->fifo_reg,	aligned_buf[i]);
+		}
+	} else
+#endif
+	{
+		u64 *pdata = buf;
+		for (; cnt >= 8; cnt -= 8)
+			mci_fifo_writeq(host->fifo_reg, *pdata++);
+		buf = pdata;
+	}
+	/* put anything remaining in the part_buf */
+	if (cnt) {
+		dw_mci_set_part_bytes(host, buf, cnt);
+		/* Push data if we have reached the expected data length */
+		if ((data->bytes_xfered + init_cnt) ==
+		    (data->blksz * data->blocks))
+			mci_fifo_writeq(host->fifo_reg, host->part_buf);
+	}
+}
+
+static void dw_mci_pull_data64(struct dw_mci *host, void *buf, int cnt)
+{
+#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
+	if (unlikely((unsigned long)buf & 0x7)) {
+		while (cnt >= 8) {
+			/* pull data from fifo into aligned buffer */
+			u64 aligned_buf[16];
+			int len = min(cnt & -8, (int)sizeof(aligned_buf));
+			int items = len >> 3;
+			int i;
+			for (i = 0; i < items; ++i)
+				aligned_buf[i] = mci_fifo_readq(host->fifo_reg);
+
+			/* memcpy from aligned buffer into output buffer */
+			memcpy(buf, aligned_buf, len);
+			buf += len;
+			cnt -= len;
+		}
+	} else
+#endif
+	{
+		u64 *pdata = buf;
+		for (; cnt >= 8; cnt -= 8)
+			*pdata++ = mci_fifo_readq(host->fifo_reg);
+		buf = pdata;
+	}
+	if (cnt) {
+		host->part_buf = mci_fifo_readq(host->fifo_reg);
+		dw_mci_pull_final_bytes(host, buf, cnt);
+	}
+}
+
+static void dw_mci_pull_data(struct dw_mci *host, void *buf, int cnt)
+{
+	int len;
+
+	/* get remaining partial bytes */
+	len = dw_mci_pull_part_bytes(host, buf, cnt);
+	if (unlikely(len == cnt))
+		return;
+	buf += len;
+	cnt -= len;
+
+	/* get the rest of the data */
+	host->pull_data(host, buf, cnt);
+}
+
+static void dw_mci_read_data_pio(struct dw_mci *host, bool dto)
+{
+	struct sg_mapping_iter *sg_miter = &host->sg_miter;
+	void *buf;
+	unsigned int offset;
+	struct mmc_data	*data = host->data;
+	int shift = host->data_shift;
+	u32 status;
+	unsigned int len;
+	unsigned int remain, fcnt;
+
+	do {
+		if (!sg_miter_next(sg_miter))
+			goto done;
+
+		host->sg = sg_miter->piter.sg;
+		buf = sg_miter->addr;
+		remain = sg_miter->length;
+		offset = 0;
+
+		do {
+			fcnt = (SDMMC_GET_FCNT(mci_readl(host, STATUS))
+					<< shift) + host->part_buf_count;
+			len = min(remain, fcnt);
+			if (!len)
+				break;
+			dw_mci_pull_data(host, (void *)(buf + offset), len);
+			data->bytes_xfered += len;
+			offset += len;
+			remain -= len;
+		} while (remain);
+
+		sg_miter->consumed = offset;
+		status = mci_readl(host, MINTSTS);
+		mci_writel(host, RINTSTS, SDMMC_INT_RXDR);
+	/* if the RXDR is ready read again */
+	} while ((status & SDMMC_INT_RXDR) ||
+		 (dto && SDMMC_GET_FCNT(mci_readl(host, STATUS))));
+
+	if (!remain) {
+		if (!sg_miter_next(sg_miter))
+			goto done;
+		sg_miter->consumed = 0;
+	}
+	sg_miter_stop(sg_miter);
+	return;
+
+done:
+	sg_miter_stop(sg_miter);
+	host->sg = NULL;
+	smp_wmb();
+	set_bit(EVENT_XFER_COMPLETE, &host->pending_events);
+}
+
+static void dw_mci_write_data_pio(struct dw_mci *host)
+{
+	struct sg_mapping_iter *sg_miter = &host->sg_miter;
+	void *buf;
+	unsigned int offset;
+	struct mmc_data	*data = host->data;
+	int shift = host->data_shift;
+	u32 status;
+	unsigned int len;
+	unsigned int fifo_depth = host->fifo_depth;
+	unsigned int remain, fcnt;
+
+	do {
+		if (!sg_miter_next(sg_miter))
+			goto done;
+
+		host->sg = sg_miter->piter.sg;
+		buf = sg_miter->addr;
+		remain = sg_miter->length;
+		offset = 0;
+
+		do {
+			fcnt = ((fifo_depth -
+				 SDMMC_GET_FCNT(mci_readl(host, STATUS)))
+					<< shift) - host->part_buf_count;
+			len = min(remain, fcnt);
+			if (!len)
+				break;
+			host->push_data(host, (void *)(buf + offset), len);
+			data->bytes_xfered += len;
+			offset += len;
+			remain -= len;
+		} while (remain);
+
+		sg_miter->consumed = offset;
+		status = mci_readl(host, MINTSTS);
+		mci_writel(host, RINTSTS, SDMMC_INT_TXDR);
+	} while (status & SDMMC_INT_TXDR); /* if TXDR write again */
+
+	if (!remain) {
+		if (!sg_miter_next(sg_miter))
+			goto done;
+		sg_miter->consumed = 0;
+	}
+	sg_miter_stop(sg_miter);
+	return;
+
+done:
+	sg_miter_stop(sg_miter);
+	host->sg = NULL;
+	smp_wmb();
+	set_bit(EVENT_XFER_COMPLETE, &host->pending_events);
+}
+
+static void dw_mci_cmd_interrupt(struct dw_mci *host, u32 status)
+{
+	if (!host->cmd_status)
+		host->cmd_status = status;
+
+	smp_wmb();
+
+	set_bit(EVENT_CMD_COMPLETE, &host->pending_events);
+	tasklet_schedule(&host->tasklet);
+}
+
+static void dw_mci_handle_cd(struct dw_mci *host)
+{
+	int i;
+
+	for (i = 0; i < host->num_slots; i++) {
+		struct dw_mci_slot *slot = host->slot[i];
+
+		if (!slot)
+			continue;
+
+		if (slot->mmc->ops->card_event)
+			slot->mmc->ops->card_event(slot->mmc);
+		mmc_detect_change(slot->mmc,
+			msecs_to_jiffies(host->pdata->detect_delay_ms));
+	}
+}
+
+static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
+{
+	struct dw_mci *host = dev_id;
+	u32 pending;
+	int i;
+
+	pending = mci_readl(host, MINTSTS); /* read-only mask reg */
+
+	/*
+	 * DTO fix - version 2.10a and below, and only if internal DMA
+	 * is configured.
+	 */
+	if (host->quirks & DW_MCI_QUIRK_IDMAC_DTO) {
+		if (!pending &&
+		    ((mci_readl(host, STATUS) >> 17) & 0x1fff))
+			pending |= SDMMC_INT_DATA_OVER;
+	}
+
+	if (pending) {
+		/* Check volt switch first, since it can look like an error */
+		if ((host->state == STATE_SENDING_CMD11) &&
+		    (pending & SDMMC_INT_VOLT_SWITCH)) {
+			unsigned long irqflags;
+
+			mci_writel(host, RINTSTS, SDMMC_INT_VOLT_SWITCH);
+			pending &= ~SDMMC_INT_VOLT_SWITCH;
+
+			/*
+			 * Hold the lock; we know cmd11_timer can't be kicked
+			 * off after the lock is released, so safe to delete.
+			 */
+			spin_lock_irqsave(&host->irq_lock, irqflags);
+			dw_mci_cmd_interrupt(host, pending);
+			spin_unlock_irqrestore(&host->irq_lock, irqflags);
+
+			del_timer(&host->cmd11_timer);
+		}
+
+		if (pending & DW_MCI_CMD_ERROR_FLAGS) {
+			mci_writel(host, RINTSTS, DW_MCI_CMD_ERROR_FLAGS);
+			host->cmd_status = pending;
+			smp_wmb();
+			set_bit(EVENT_CMD_COMPLETE, &host->pending_events);
+		}
+
+		if (pending & DW_MCI_DATA_ERROR_FLAGS) {
+			/* if there is an error report DATA_ERROR */
+			mci_writel(host, RINTSTS, DW_MCI_DATA_ERROR_FLAGS);
+			host->data_status = pending;
+			smp_wmb();
+			set_bit(EVENT_DATA_ERROR, &host->pending_events);
+			tasklet_schedule(&host->tasklet);
+		}
+
+		if (pending & SDMMC_INT_DATA_OVER) {
+			mci_writel(host, RINTSTS, SDMMC_INT_DATA_OVER);
+			if (!host->data_status)
+				host->data_status = pending;
+			smp_wmb();
+			if (host->dir_status == DW_MCI_RECV_STATUS) {
+				if (host->sg != NULL)
+					dw_mci_read_data_pio(host, true);
+			}
+			set_bit(EVENT_DATA_COMPLETE, &host->pending_events);
+			tasklet_schedule(&host->tasklet);
+		}
+
+		if (pending & SDMMC_INT_RXDR) {
+			mci_writel(host, RINTSTS, SDMMC_INT_RXDR);
+			if (host->dir_status == DW_MCI_RECV_STATUS && host->sg)
+				dw_mci_read_data_pio(host, false);
+		}
+
+		if (pending & SDMMC_INT_TXDR) {
+			mci_writel(host, RINTSTS, SDMMC_INT_TXDR);
+			if (host->dir_status == DW_MCI_SEND_STATUS && host->sg)
+				dw_mci_write_data_pio(host);
+		}
+
+		if (pending & SDMMC_INT_CMD_DONE) {
+			mci_writel(host, RINTSTS, SDMMC_INT_CMD_DONE);
+			dw_mci_cmd_interrupt(host, pending);
+		}
+
+		if (pending & SDMMC_INT_CD) {
+			mci_writel(host, RINTSTS, SDMMC_INT_CD);
+			dw_mci_handle_cd(host);
+		}
+
+		/* Handle SDIO Interrupts */
+		for (i = 0; i < host->num_slots; i++) {
+			struct dw_mci_slot *slot = host->slot[i];
+
+			if (!slot)
+				continue;
+
+			if (pending & SDMMC_INT_SDIO(slot->sdio_id)) {
+				mci_writel(host, RINTSTS,
+					   SDMMC_INT_SDIO(slot->sdio_id));
+				mmc_signal_sdio_irq(slot->mmc);
+			}
+		}
+
+	}
+
+#ifdef CONFIG_MMC_DW_IDMAC
+	/* Handle DMA interrupts */
+	if (host->dma_64bit_address == 1) {
+		pending = mci_readl(host, IDSTS64);
+		if (pending & (SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI)) {
+			mci_writel(host, IDSTS64, SDMMC_IDMAC_INT_TI |
+							SDMMC_IDMAC_INT_RI);
+			mci_writel(host, IDSTS64, SDMMC_IDMAC_INT_NI);
+			host->dma_ops->complete(host);
+		}
+	} else {
+		pending = mci_readl(host, IDSTS);
+		if (pending & (SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI)) {
+			mci_writel(host, IDSTS, SDMMC_IDMAC_INT_TI |
+							SDMMC_IDMAC_INT_RI);
+			mci_writel(host, IDSTS, SDMMC_IDMAC_INT_NI);
+			host->dma_ops->complete(host);
+		}
+	}
+#endif
+
+	return IRQ_HANDLED;
+}
+
+#ifdef CONFIG_OF
+/* given a slot id, find out the device node representing that slot */
+static struct device_node *dw_mci_of_find_slot_node(struct device *dev, u8 slot)
+{
+	struct device_node *np;
+	const __be32 *addr;
+	int len;
+
+	if (!dev || !dev->of_node)
+		return NULL;
+
+	for_each_child_of_node(dev->of_node, np) {
+		addr = of_get_property(np, "reg", &len);
+		if (!addr || (len < sizeof(int)))
+			continue;
+		if (be32_to_cpup(addr) == slot)
+			return np;
+	}
+	return NULL;
+}
+
+static struct dw_mci_of_slot_quirks {
+	char *quirk;
+	int id;
+} of_slot_quirks[] = {
+	{
+		.quirk	= "disable-wp",
+		.id	= DW_MCI_SLOT_QUIRK_NO_WRITE_PROTECT,
+	},
+};
+
+static int dw_mci_of_get_slot_quirks(struct device *dev, u8 slot)
+{
+	struct device_node *np = dw_mci_of_find_slot_node(dev, slot);
+	int quirks = 0;
+	int idx;
+
+	/* get quirks */
+	for (idx = 0; idx < ARRAY_SIZE(of_slot_quirks); idx++)
+		if (of_get_property(np, of_slot_quirks[idx].quirk, NULL)) {
+			dev_warn(dev, "Slot quirk %s is deprecated\n",
+					of_slot_quirks[idx].quirk);
+			quirks |= of_slot_quirks[idx].id;
+		}
+
+	return quirks;
+}
+#else /* CONFIG_OF */
+static int dw_mci_of_get_slot_quirks(struct device *dev, u8 slot)
+{
+	return 0;
+}
+#endif /* CONFIG_OF */
+
+static int dw_mci_init_slot(struct dw_mci *host, unsigned int id)
+{
+	struct mmc_host *mmc;
+	struct dw_mci_slot *slot;
+	const struct dw_mci_drv_data *drv_data = host->drv_data;
+	int ctrl_id, ret;
+	u32 freq[2];
+
+	mmc = mmc_alloc_host(sizeof(struct dw_mci_slot), host->dev);
+	if (!mmc)
+		return -ENOMEM;
+
+	slot = mmc_priv(mmc);
+	slot->id = id;
+	slot->sdio_id = host->sdio_id0 + id;
+	slot->mmc = mmc;
+	slot->host = host;
+	host->slot[id] = slot;
+
+	slot->quirks = dw_mci_of_get_slot_quirks(host->dev, slot->id);
+
+	mmc->ops = &dw_mci_ops;
+	if (of_property_read_u32_array(host->dev->of_node,
+				       "clock-freq-min-max", freq, 2)) {
+		mmc->f_min = DW_MCI_FREQ_MIN;
+		mmc->f_max = DW_MCI_FREQ_MAX;
+	} else {
+		mmc->f_min = freq[0];
+		mmc->f_max = freq[1];
+	}
+
+	/*if there are external regulators, get them*/
+	ret = mmc_regulator_get_supply(mmc);
+	if (ret == -EPROBE_DEFER)
+		goto err_host_allocated;
+
+	if (!mmc->ocr_avail)
+		mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
+
+	if (host->pdata->caps)
+		mmc->caps = host->pdata->caps;
+
+	if (host->pdata->pm_caps)
+		mmc->pm_caps = host->pdata->pm_caps;
+
+	if (host->dev->of_node) {
+		ctrl_id = of_alias_get_id(host->dev->of_node, "mshc");
+		if (ctrl_id < 0)
+			ctrl_id = 0;
+	} else {
+		ctrl_id = to_platform_device(host->dev)->id;
+	}
+	if (drv_data && drv_data->caps)
+		mmc->caps |= drv_data->caps[ctrl_id];
+
+	if (host->pdata->caps2)
+		mmc->caps2 = host->pdata->caps2;
+
+	ret = mmc_of_parse(mmc);
+	if (ret)
+		goto err_host_allocated;
+
+	if (host->pdata->blk_settings) {
+		mmc->max_segs = host->pdata->blk_settings->max_segs;
+		mmc->max_blk_size = host->pdata->blk_settings->max_blk_size;
+		mmc->max_blk_count = host->pdata->blk_settings->max_blk_count;
+		mmc->max_req_size = host->pdata->blk_settings->max_req_size;
+		mmc->max_seg_size = host->pdata->blk_settings->max_seg_size;
+	} else {
+		/* Useful defaults if platform data is unset. */
+#ifdef CONFIG_MMC_DW_IDMAC
+		mmc->max_segs = host->ring_size;
+		mmc->max_blk_size = 65536;
+		mmc->max_seg_size = 0x1000;
+		mmc->max_req_size = mmc->max_seg_size * host->ring_size;
+		mmc->max_blk_count = mmc->max_req_size / 512;
+#else
+		mmc->max_segs = 64;
+		mmc->max_blk_size = 65536; /* BLKSIZ is 16 bits */
+		mmc->max_blk_count = 512;
+		mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
+		mmc->max_seg_size = mmc->max_req_size;
+#endif /* CONFIG_MMC_DW_IDMAC */
+	}
+
+	if (dw_mci_get_cd(mmc))
+		set_bit(DW_MMC_CARD_PRESENT, &slot->flags);
+	else
+		clear_bit(DW_MMC_CARD_PRESENT, &slot->flags);
+
+	ret = mmc_add_host(mmc);
+	if (ret)
+		goto err_host_allocated;
+
+#if defined(CONFIG_DEBUG_FS)
+	dw_mci_init_debugfs(slot);
+#endif
+
+	return 0;
+
+err_host_allocated:
+	mmc_free_host(mmc);
+	return ret;
+}
+
+static void dw_mci_cleanup_slot(struct dw_mci_slot *slot, unsigned int id)
+{
+	/* Debugfs stuff is cleaned up by mmc core */
+	mmc_remove_host(slot->mmc);
+	slot->host->slot[id] = NULL;
+	mmc_free_host(slot->mmc);
+}
+
+static void dw_mci_init_dma(struct dw_mci *host)
+{
+	int addr_config;
+	/* Check ADDR_CONFIG bit in HCON to find IDMAC address bus width */
+	addr_config = (mci_readl(host, HCON) >> 27) & 0x01;
+
+	if (addr_config == 1) {
+		/* host supports IDMAC in 64-bit address mode */
+		host->dma_64bit_address = 1;
+		dev_info(host->dev, "IDMAC supports 64-bit address mode.\n");
+		if (!dma_set_mask(host->dev, DMA_BIT_MASK(64)))
+			dma_set_coherent_mask(host->dev, DMA_BIT_MASK(64));
+	} else {
+		/* host supports IDMAC in 32-bit address mode */
+		host->dma_64bit_address = 0;
+		dev_info(host->dev, "IDMAC supports 32-bit address mode.\n");
+	}
+
+	/* Alloc memory for sg translation */
+	host->sg_cpu = dmam_alloc_coherent(host->dev, PAGE_SIZE,
+					  &host->sg_dma, GFP_KERNEL);
+	if (!host->sg_cpu) {
+		dev_err(host->dev, "%s: could not alloc DMA memory\n",
+			__func__);
+		goto no_dma;
+	}
+
+	/* Determine which DMA interface to use */
+#ifdef CONFIG_MMC_DW_IDMAC
+	host->dma_ops = &dw_mci_idmac_ops;
+	dev_info(host->dev, "Using internal DMA controller.\n");
+#endif
+
+	if (!host->dma_ops)
+		goto no_dma;
+
+	if (host->dma_ops->init && host->dma_ops->start &&
+	    host->dma_ops->stop && host->dma_ops->cleanup) {
+		if (host->dma_ops->init(host)) {
+			dev_err(host->dev, "%s: Unable to initialize "
+				"DMA Controller.\n", __func__);
+			goto no_dma;
+		}
+	} else {
+		dev_err(host->dev, "DMA initialization not found.\n");
+		goto no_dma;
+	}
+
+	host->use_dma = 1;
+	return;
+
+no_dma:
+	dev_info(host->dev, "Using PIO mode.\n");
+	host->use_dma = 0;
+	return;
+}
+
+static bool dw_mci_ctrl_reset(struct dw_mci *host, u32 reset)
+{
+	unsigned long timeout = jiffies + msecs_to_jiffies(500);
+	u32 ctrl;
+
+	ctrl = mci_readl(host, CTRL);
+	ctrl |= reset;
+	mci_writel(host, CTRL, ctrl);
+
+	/* wait till resets clear */
+	do {
+		ctrl = mci_readl(host, CTRL);
+		if (!(ctrl & reset))
+			return true;
+	} while (time_before(jiffies, timeout));
+
+	dev_err(host->dev,
+		"Timeout resetting block (ctrl reset %#x)\n",
+		ctrl & reset);
+
+	return false;
+}
+
+static bool dw_mci_reset(struct dw_mci *host)
+{
+	u32 flags = SDMMC_CTRL_RESET | SDMMC_CTRL_FIFO_RESET;
+	bool ret = false;
+
+	/*
+	 * Reseting generates a block interrupt, hence setting
+	 * the scatter-gather pointer to NULL.
+	 */
+	if (host->sg) {
+		sg_miter_stop(&host->sg_miter);
+		host->sg = NULL;
+	}
+
+	if (host->use_dma)
+		flags |= SDMMC_CTRL_DMA_RESET;
+
+	if (dw_mci_ctrl_reset(host, flags)) {
+		/*
+		 * In all cases we clear the RAWINTS register to clear any
+		 * interrupts.
+		 */
+		mci_writel(host, RINTSTS, 0xFFFFFFFF);
+
+		/* if using dma we wait for dma_req to clear */
+		if (host->use_dma) {
+			unsigned long timeout = jiffies + msecs_to_jiffies(500);
+			u32 status;
+			do {
+				status = mci_readl(host, STATUS);
+				if (!(status & SDMMC_STATUS_DMA_REQ))
+					break;
+				cpu_relax();
+			} while (time_before(jiffies, timeout));
+
+			if (status & SDMMC_STATUS_DMA_REQ) {
+				dev_err(host->dev,
+					"%s: Timeout waiting for dma_req to "
+					"clear during reset\n", __func__);
+				goto ciu_out;
+			}
+
+			/* when using DMA next we reset the fifo again */
+			if (!dw_mci_ctrl_reset(host, SDMMC_CTRL_FIFO_RESET))
+				goto ciu_out;
+		}
+	} else {
+		/* if the controller reset bit did clear, then set clock regs */
+		if (!(mci_readl(host, CTRL) & SDMMC_CTRL_RESET)) {
+			dev_err(host->dev, "%s: fifo/dma reset bits didn't "
+				"clear but ciu was reset, doing clock update\n",
+				__func__);
+			goto ciu_out;
+		}
+	}
+
+#if IS_ENABLED(CONFIG_MMC_DW_IDMAC)
+	/* It is also recommended that we reset and reprogram idmac */
+	dw_mci_idmac_reset(host);
+#endif
+
+	ret = true;
+
+ciu_out:
+	/* After a CTRL reset we need to have CIU set clock registers  */
+	mci_send_cmd(host->cur_slot, SDMMC_CMD_UPD_CLK, 0);
+
+	return ret;
+}
+
+static void dw_mci_cmd11_timer(unsigned long arg)
+{
+	struct dw_mci *host = (struct dw_mci *)arg;
+
+	if (host->state != STATE_SENDING_CMD11) {
+		dev_warn(host->dev, "Unexpected CMD11 timeout\n");
+		return;
+	}
+
+	host->cmd_status = SDMMC_INT_RTO;
+	set_bit(EVENT_CMD_COMPLETE, &host->pending_events);
+	tasklet_schedule(&host->tasklet);
+}
+
+#ifdef CONFIG_OF
+static struct dw_mci_of_quirks {
+	char *quirk;
+	int id;
+} of_quirks[] = {
+	{
+		.quirk	= "broken-cd",
+		.id	= DW_MCI_QUIRK_BROKEN_CARD_DETECTION,
+	}, {
+		.quirk	= "disable-wp",
+		.id	= DW_MCI_QUIRK_NO_WRITE_PROTECT,
+	},
+};
+
+static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host)
+{
+	struct dw_mci_board *pdata;
+	struct device *dev = host->dev;
+	struct device_node *np = dev->of_node;
+	const struct dw_mci_drv_data *drv_data = host->drv_data;
+	int idx, ret;
+	u32 clock_frequency;
+
+	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return ERR_PTR(-ENOMEM);
+
+	/* find out number of slots supported */
+	if (of_property_read_u32(dev->of_node, "num-slots",
+				&pdata->num_slots)) {
+		dev_info(dev, "num-slots property not found, "
+				"assuming 1 slot is available\n");
+		pdata->num_slots = 1;
+	}
+
+	/* get quirks */
+	for (idx = 0; idx < ARRAY_SIZE(of_quirks); idx++)
+		if (of_get_property(np, of_quirks[idx].quirk, NULL))
+			pdata->quirks |= of_quirks[idx].id;
+
+	if (of_property_read_u32(np, "fifo-depth", &pdata->fifo_depth))
+		dev_info(dev, "fifo-depth property not found, using "
+				"value of FIFOTH register as default\n");
+
+	of_property_read_u32(np, "card-detect-delay", &pdata->detect_delay_ms);
+
+	if (!of_property_read_u32(np, "clock-frequency", &clock_frequency))
+		pdata->bus_hz = clock_frequency;
+
+	if (drv_data && drv_data->parse_dt) {
+		ret = drv_data->parse_dt(host);
+		if (ret)
+			return ERR_PTR(ret);
+	}
+
+	if (of_find_property(np, "supports-highspeed", NULL))
+		pdata->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED;
+
+	return pdata;
+}
+
+#else /* CONFIG_OF */
+static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host)
+{
+	return ERR_PTR(-EINVAL);
+}
+#endif /* CONFIG_OF */
+
+static void dw_mci_enable_cd(struct dw_mci *host)
+{
+	struct dw_mci_board *brd = host->pdata;
+	unsigned long irqflags;
+	u32 temp;
+	int i;
+
+	/* No need for CD if broken card detection */
+	if (brd->quirks & DW_MCI_QUIRK_BROKEN_CARD_DETECTION)
+		return;
+
+	/* No need for CD if all slots have a non-error GPIO */
+	for (i = 0; i < host->num_slots; i++) {
+		struct dw_mci_slot *slot = host->slot[i];
+
+		if (IS_ERR_VALUE(mmc_gpio_get_cd(slot->mmc)))
+			break;
+	}
+	if (i == host->num_slots)
+		return;
+
+	spin_lock_irqsave(&host->irq_lock, irqflags);
+	temp = mci_readl(host, INTMASK);
+	temp  |= SDMMC_INT_CD;
+	mci_writel(host, INTMASK, temp);
+	spin_unlock_irqrestore(&host->irq_lock, irqflags);
+}
+
+int dw_mci_probe(struct dw_mci *host)
+{
+	const struct dw_mci_drv_data *drv_data = host->drv_data;
+	int width, i, ret = 0;
+	u32 fifo_size;
+	int init_slots = 0;
+
+	if (!host->pdata) {
+		host->pdata = dw_mci_parse_dt(host);
+		if (IS_ERR(host->pdata)) {
+			dev_err(host->dev, "platform data not available\n");
+			return -EINVAL;
+		}
+	}
+
+	if (host->pdata->num_slots > 1) {
+		dev_err(host->dev,
+			"Platform data must supply num_slots.\n");
+		return -ENODEV;
+	}
+
+	host->biu_clk = devm_clk_get(host->dev, "biu");
+	if (IS_ERR(host->biu_clk)) {
+		dev_dbg(host->dev, "biu clock not available\n");
+	} else {
+		ret = clk_prepare_enable(host->biu_clk);
+		if (ret) {
+			dev_err(host->dev, "failed to enable biu clock\n");
+			return ret;
+		}
+	}
+
+	host->ciu_clk = devm_clk_get(host->dev, "ciu");
+	if (IS_ERR(host->ciu_clk)) {
+		dev_dbg(host->dev, "ciu clock not available\n");
+		host->bus_hz = host->pdata->bus_hz;
+	} else {
+		ret = clk_prepare_enable(host->ciu_clk);
+		if (ret) {
+			dev_err(host->dev, "failed to enable ciu clock\n");
+			goto err_clk_biu;
+		}
+
+		if (host->pdata->bus_hz) {
+			ret = clk_set_rate(host->ciu_clk, host->pdata->bus_hz);
+			if (ret)
+				dev_warn(host->dev,
+					 "Unable to set bus rate to %uHz\n",
+					 host->pdata->bus_hz);
+		}
+		host->bus_hz = clk_get_rate(host->ciu_clk);
+	}
+
+	if (!host->bus_hz) {
+		dev_err(host->dev,
+			"Platform data must supply bus speed\n");
+		ret = -ENODEV;
+		goto err_clk_ciu;
+	}
+
+	if (drv_data && drv_data->init) {
+		ret = drv_data->init(host);
+		if (ret) {
+			dev_err(host->dev,
+				"implementation specific init failed\n");
+			goto err_clk_ciu;
+		}
+	}
+
+	if (drv_data && drv_data->setup_clock) {
+		ret = drv_data->setup_clock(host);
+		if (ret) {
+			dev_err(host->dev,
+				"implementation specific clock setup failed\n");
+			goto err_clk_ciu;
+		}
+	}
+
+	setup_timer(&host->cmd11_timer,
+		    dw_mci_cmd11_timer, (unsigned long)host);
+
+	host->quirks = host->pdata->quirks;
+
+	spin_lock_init(&host->lock);
+	spin_lock_init(&host->irq_lock);
+	INIT_LIST_HEAD(&host->queue);
+
+	/*
+	 * Get the host data width - this assumes that HCON has been set with
+	 * the correct values.
+	 */
+	i = (mci_readl(host, HCON) >> 7) & 0x7;
+	if (!i) {
+		host->push_data = dw_mci_push_data16;
+		host->pull_data = dw_mci_pull_data16;
+		width = 16;
+		host->data_shift = 1;
+	} else if (i == 2) {
+		host->push_data = dw_mci_push_data64;
+		host->pull_data = dw_mci_pull_data64;
+		width = 64;
+		host->data_shift = 3;
+	} else {
+		/* Check for a reserved value, and warn if it is */
+		WARN((i != 1),
+		     "HCON reports a reserved host data width!\n"
+		     "Defaulting to 32-bit access.\n");
+		host->push_data = dw_mci_push_data32;
+		host->pull_data = dw_mci_pull_data32;
+		width = 32;
+		host->data_shift = 2;
+	}
+
+	/* Reset all blocks */
+	if (!dw_mci_ctrl_reset(host, SDMMC_CTRL_ALL_RESET_FLAGS))
+		return -ENODEV;
+
+	host->dma_ops = host->pdata->dma_ops;
+	dw_mci_init_dma(host);
+
+	/* Clear the interrupts for the host controller */
+	mci_writel(host, RINTSTS, 0xFFFFFFFF);
+	mci_writel(host, INTMASK, 0); /* disable all mmc interrupt first */
+
+	/* Put in max timeout */
+	mci_writel(host, TMOUT, 0xFFFFFFFF);
+
+	/*
+	 * FIFO threshold settings  RxMark  = fifo_size / 2 - 1,
+	 *                          Tx Mark = fifo_size / 2 DMA Size = 8
+	 */
+	if (!host->pdata->fifo_depth) {
+		/*
+		 * Power-on value of RX_WMark is FIFO_DEPTH-1, but this may
+		 * have been overwritten by the bootloader, just like we're
+		 * about to do, so if you know the value for your hardware, you
+		 * should put it in the platform data.
+		 */
+		fifo_size = mci_readl(host, FIFOTH);
+		fifo_size = 1 + ((fifo_size >> 16) & 0xfff);
+	} else {
+		fifo_size = host->pdata->fifo_depth;
+	}
+	host->fifo_depth = fifo_size;
+	host->fifoth_val =
+		SDMMC_SET_FIFOTH(0x2, fifo_size / 2 - 1, fifo_size / 2);
+	mci_writel(host, FIFOTH, host->fifoth_val);
+
+	/* disable clock to CIU */
+	mci_writel(host, CLKENA, 0);
+	mci_writel(host, CLKSRC, 0);
+
+	/*
+	 * In 2.40a spec, Data offset is changed.
+	 * Need to check the version-id and set data-offset for DATA register.
+	 */
+	host->verid = SDMMC_GET_VERID(mci_readl(host, VERID));
+	dev_info(host->dev, "Version ID is %04x\n", host->verid);
+
+	if (host->verid < DW_MMC_240A)
+		host->fifo_reg = host->regs + DATA_OFFSET;
+	else
+		host->fifo_reg = host->regs + DATA_240A_OFFSET;
+
+	tasklet_init(&host->tasklet, dw_mci_tasklet_func, (unsigned long)host);
+	ret = devm_request_irq(host->dev, host->irq, dw_mci_interrupt,
+			       host->irq_flags, "dw-mci", host);
+	if (ret)
+		goto err_dmaunmap;
+
+	if (host->pdata->num_slots)
+		host->num_slots = host->pdata->num_slots;
+	else
+		host->num_slots = ((mci_readl(host, HCON) >> 1) & 0x1F) + 1;
+
+	/*
+	 * Enable interrupts for command done, data over, data empty,
+	 * receive ready and error such as transmit, receive timeout, crc error
+	 */
+	mci_writel(host, RINTSTS, 0xFFFFFFFF);
+	mci_writel(host, INTMASK, SDMMC_INT_CMD_DONE | SDMMC_INT_DATA_OVER |
+		   SDMMC_INT_TXDR | SDMMC_INT_RXDR |
+		   DW_MCI_ERROR_FLAGS);
+	mci_writel(host, CTRL, SDMMC_CTRL_INT_ENABLE); /* Enable mci interrupt */
+
+	dev_info(host->dev, "DW MMC controller at irq %d, "
+		 "%d bit host data width, "
+		 "%u deep fifo\n",
+		 host->irq, width, fifo_size);
+
+	/* We need at least one slot to succeed */
+	for (i = 0; i < host->num_slots; i++) {
+		ret = dw_mci_init_slot(host, i);
+		if (ret)
+			dev_dbg(host->dev, "slot %d init failed\n", i);
+		else
+			init_slots++;
+	}
+
+	if (init_slots) {
+		dev_info(host->dev, "%d slots initialized\n", init_slots);
+	} else {
+		dev_dbg(host->dev, "attempted to initialize %d slots, "
+					"but failed on all\n", host->num_slots);
+		goto err_dmaunmap;
+	}
+
+	/* Now that slots are all setup, we can enable card detect */
+	dw_mci_enable_cd(host);
+
+	if (host->quirks & DW_MCI_QUIRK_IDMAC_DTO)
+		dev_info(host->dev, "Internal DMAC interrupt fix enabled.\n");
+
+	return 0;
+
+err_dmaunmap:
+	if (host->use_dma && host->dma_ops->exit)
+		host->dma_ops->exit(host);
+
+err_clk_ciu:
+	if (!IS_ERR(host->ciu_clk))
+		clk_disable_unprepare(host->ciu_clk);
+
+err_clk_biu:
+	if (!IS_ERR(host->biu_clk))
+		clk_disable_unprepare(host->biu_clk);
+
+	return ret;
+}
+EXPORT_SYMBOL(dw_mci_probe);
+
+void dw_mci_remove(struct dw_mci *host)
+{
+	int i;
+
+	mci_writel(host, RINTSTS, 0xFFFFFFFF);
+	mci_writel(host, INTMASK, 0); /* disable all mmc interrupt first */
+
+	for (i = 0; i < host->num_slots; i++) {
+		dev_dbg(host->dev, "remove slot %d\n", i);
+		if (host->slot[i])
+			dw_mci_cleanup_slot(host->slot[i], i);
+	}
+
+	/* disable clock to CIU */
+	mci_writel(host, CLKENA, 0);
+	mci_writel(host, CLKSRC, 0);
+
+	if (host->use_dma && host->dma_ops->exit)
+		host->dma_ops->exit(host);
+
+	if (!IS_ERR(host->ciu_clk))
+		clk_disable_unprepare(host->ciu_clk);
+
+	if (!IS_ERR(host->biu_clk))
+		clk_disable_unprepare(host->biu_clk);
+}
+EXPORT_SYMBOL(dw_mci_remove);
+
+
+
+#ifdef CONFIG_PM_SLEEP
+/*
+ * TODO: we should probably disable the clock to the card in the suspend path.
+ */
+int dw_mci_suspend(struct dw_mci *host)
+{
+	return 0;
+}
+EXPORT_SYMBOL(dw_mci_suspend);
+
+int dw_mci_resume(struct dw_mci *host)
+{
+	int i, ret;
+
+	if (!dw_mci_ctrl_reset(host, SDMMC_CTRL_ALL_RESET_FLAGS)) {
+		ret = -ENODEV;
+		return ret;
+	}
+
+	if (host->use_dma && host->dma_ops->init)
+		host->dma_ops->init(host);
+
+	/*
+	 * Restore the initial value at FIFOTH register
+	 * And Invalidate the prev_blksz with zero
+	 */
+	mci_writel(host, FIFOTH, host->fifoth_val);
+	host->prev_blksz = 0;
+
+	/* Put in max timeout */
+	mci_writel(host, TMOUT, 0xFFFFFFFF);
+
+	mci_writel(host, RINTSTS, 0xFFFFFFFF);
+	mci_writel(host, INTMASK, SDMMC_INT_CMD_DONE | SDMMC_INT_DATA_OVER |
+		   SDMMC_INT_TXDR | SDMMC_INT_RXDR |
+		   DW_MCI_ERROR_FLAGS);
+	mci_writel(host, CTRL, SDMMC_CTRL_INT_ENABLE);
+
+	for (i = 0; i < host->num_slots; i++) {
+		struct dw_mci_slot *slot = host->slot[i];
+		if (!slot)
+			continue;
+		if (slot->mmc->pm_flags & MMC_PM_KEEP_POWER) {
+			dw_mci_set_ios(slot->mmc, &slot->mmc->ios);
+			dw_mci_setup_bus(slot, true);
+		}
+	}
+
+	/* Now that slots are all setup, we can enable card detect */
+	dw_mci_enable_cd(host);
+
+	return 0;
+}
+EXPORT_SYMBOL(dw_mci_resume);
+#endif /* CONFIG_PM_SLEEP */
+
+static int __init dw_mci_init(void)
+{
+	pr_info("Synopsys Designware Multimedia Card Interface Driver\n");
+	return 0;
+}
+
+static void __exit dw_mci_exit(void)
+{
+}
+
+module_init(dw_mci_init);
+module_exit(dw_mci_exit);
+
+MODULE_DESCRIPTION("DW Multimedia Card Interface driver");
+MODULE_AUTHOR("NXP Semiconductor VietNam");
+MODULE_AUTHOR("Imagination Technologies Ltd");
+MODULE_LICENSE("GPL v2");