Linux-libre 4.8.2-gnupck-4.8.2-gnu

1 files changed, 105 insertions, 48 deletions

diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index 9d3ae1f4b..99e0b334f 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -39,11 +39,13 @@
 #define  ESDHC_VENDOR_SPEC_VSELECT	(1 << 1)
 #define  ESDHC_VENDOR_SPEC_FRC_SDCLK_ON	(1 << 8)
 #define ESDHC_WTMK_LVL			0x44
+#define  ESDHC_WTMK_DEFAULT_VAL		0x10401040
 #define ESDHC_MIX_CTRL			0x48
 #define  ESDHC_MIX_CTRL_DDREN		(1 << 3)
 #define  ESDHC_MIX_CTRL_AC23EN		(1 << 7)
 #define  ESDHC_MIX_CTRL_EXE_TUNE	(1 << 22)
 #define  ESDHC_MIX_CTRL_SMPCLK_SEL	(1 << 23)
+#define  ESDHC_MIX_CTRL_AUTO_TUNE_EN	(1 << 24)
 #define  ESDHC_MIX_CTRL_FBCLK_SEL	(1 << 25)
 #define  ESDHC_MIX_CTRL_HS400_EN	(1 << 26)
 /* Bits 3 and 6 are not SDHCI standard definitions */
@@ -75,7 +77,8 @@
 #define ESDHC_TUNING_CTRL		0xcc
 #define ESDHC_STD_TUNING_EN		(1 << 24)
 /* NOTE: the minimum valid tuning start tap for mx6sl is 1 */
-#define ESDHC_TUNING_START_TAP		0x1
+#define ESDHC_TUNING_START_TAP_DEFAULT	0x1
+#define ESDHC_TUNING_START_TAP_MASK	0xff
 #define ESDHC_TUNING_STEP_MASK		0x00070000
 #define ESDHC_TUNING_STEP_SHIFT		16
 
@@ -299,7 +302,8 @@ static u32 esdhc_readl_le(struct sdhci_host *host, int reg)
 				/* imx6q/dl does not have cap_1 register, fake one */
 				val = SDHCI_SUPPORT_DDR50 | SDHCI_SUPPORT_SDR104
 					| SDHCI_SUPPORT_SDR50
-					| SDHCI_USE_SDR50_TUNING;
+					| SDHCI_USE_SDR50_TUNING
+					| (SDHCI_TUNING_MODE_3 << SDHCI_RETUNING_MODE_SHIFT);
 
 			if (imx_data->socdata->flags & ESDHC_FLAG_HS400)
 				val |= SDHCI_SUPPORT_HS400;
@@ -469,32 +473,29 @@ static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg)
 		writel(new_val, host->ioaddr + ESDHC_VENDOR_SPEC);
 		if (imx_data->socdata->flags & ESDHC_FLAG_MAN_TUNING) {
 			new_val = readl(host->ioaddr + ESDHC_MIX_CTRL);
-			if (val & SDHCI_CTRL_TUNED_CLK)
+			if (val & SDHCI_CTRL_TUNED_CLK) {
 				new_val |= ESDHC_MIX_CTRL_SMPCLK_SEL;
-			else
+				new_val |= ESDHC_MIX_CTRL_AUTO_TUNE_EN;
+			} else {
 				new_val &= ~ESDHC_MIX_CTRL_SMPCLK_SEL;
+				new_val &= ~ESDHC_MIX_CTRL_AUTO_TUNE_EN;
+			}
 			writel(new_val , host->ioaddr + ESDHC_MIX_CTRL);
 		} else if (imx_data->socdata->flags & ESDHC_FLAG_STD_TUNING) {
 			u32 v = readl(host->ioaddr + SDHCI_ACMD12_ERR);
 			u32 m = readl(host->ioaddr + ESDHC_MIX_CTRL);
-			u32 tuning_ctrl;
 			if (val & SDHCI_CTRL_TUNED_CLK) {
 				v |= ESDHC_MIX_CTRL_SMPCLK_SEL;
 			} else {
 				v &= ~ESDHC_MIX_CTRL_SMPCLK_SEL;
 				m &= ~ESDHC_MIX_CTRL_FBCLK_SEL;
+				m &= ~ESDHC_MIX_CTRL_AUTO_TUNE_EN;
 			}
 
 			if (val & SDHCI_CTRL_EXEC_TUNING) {
 				v |= ESDHC_MIX_CTRL_EXE_TUNE;
 				m |= ESDHC_MIX_CTRL_FBCLK_SEL;
-				tuning_ctrl = readl(host->ioaddr + ESDHC_TUNING_CTRL);
-				tuning_ctrl |= ESDHC_STD_TUNING_EN | ESDHC_TUNING_START_TAP;
-				if (imx_data->boarddata.tuning_step) {
-					tuning_ctrl &= ~ESDHC_TUNING_STEP_MASK;
-					tuning_ctrl |= imx_data->boarddata.tuning_step << ESDHC_TUNING_STEP_SHIFT;
-				}
-				writel(tuning_ctrl, host->ioaddr + ESDHC_TUNING_CTRL);
+				m |= ESDHC_MIX_CTRL_AUTO_TUNE_EN;
 			} else {
 				v &= ~ESDHC_MIX_CTRL_EXE_TUNE;
 			}
@@ -751,6 +752,7 @@ static void esdhc_post_tuning(struct sdhci_host *host)
 
 	reg = readl(host->ioaddr + ESDHC_MIX_CTRL);
 	reg &= ~ESDHC_MIX_CTRL_EXE_TUNE;
+	reg |= ESDHC_MIX_CTRL_AUTO_TUNE_EN;
 	writel(reg, host->ioaddr + ESDHC_MIX_CTRL);
 }
 
@@ -838,6 +840,11 @@ static void esdhc_set_strobe_dll(struct sdhci_host *host)
 	u32 v;
 
 	if (host->mmc->actual_clock > ESDHC_STROBE_DLL_CLK_FREQ) {
+		/* disable clock before enabling strobe dll */
+		writel(readl(host->ioaddr + ESDHC_VENDOR_SPEC) &
+		       ~ESDHC_VENDOR_SPEC_FRC_SDCLK_ON,
+		       host->ioaddr + ESDHC_VENDOR_SPEC);
+
 		/* force a reset on strobe dll */
 		writel(ESDHC_STROBE_DLL_CTRL_RESET,
 			host->ioaddr + ESDHC_STROBE_DLL_CTRL);
@@ -899,6 +906,8 @@ static void esdhc_set_uhs_signaling(struct sdhci_host *host, unsigned timing)
 		m |= ESDHC_MIX_CTRL_DDREN | ESDHC_MIX_CTRL_HS400_EN;
 		writel(m, host->ioaddr + ESDHC_MIX_CTRL);
 		imx_data->is_ddr = 1;
+		/* update clock after enable DDR for strobe DLL lock */
+		host->ops->set_clock(host, host->clock);
 		esdhc_set_strobe_dll(host);
 		break;
 	}
@@ -957,6 +966,62 @@ static const struct sdhci_pltfm_data sdhci_esdhc_imx_pdata = {
 	.ops = &sdhci_esdhc_ops,
 };
 
+static void sdhci_esdhc_imx_hwinit(struct sdhci_host *host)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct pltfm_imx_data *imx_data = sdhci_pltfm_priv(pltfm_host);
+	int tmp;
+
+	if (esdhc_is_usdhc(imx_data)) {
+		/*
+		 * The imx6q ROM code will change the default watermark
+		 * level setting to something insane.  Change it back here.
+		 */
+		writel(ESDHC_WTMK_DEFAULT_VAL, host->ioaddr + ESDHC_WTMK_LVL);
+
+		/*
+		 * ROM code will change the bit burst_length_enable setting
+		 * to zero if this usdhc is choosed to boot system. Change
+		 * it back here, otherwise it will impact the performance a
+		 * lot. This bit is used to enable/disable the burst length
+		 * for the external AHB2AXI bridge, it's usefully especially
+		 * for INCR transfer because without burst length indicator,
+		 * the AHB2AXI bridge does not know the burst length in
+		 * advance. And without burst length indicator, AHB INCR
+		 * transfer can only be converted to singles on the AXI side.
+		 */
+		writel(readl(host->ioaddr + SDHCI_HOST_CONTROL)
+			| ESDHC_BURST_LEN_EN_INCR,
+			host->ioaddr + SDHCI_HOST_CONTROL);
+		/*
+		* errata ESDHC_FLAG_ERR004536 fix for MX6Q TO1.2 and MX6DL
+		* TO1.1, it's harmless for MX6SL
+		*/
+		writel(readl(host->ioaddr + 0x6c) | BIT(7),
+			host->ioaddr + 0x6c);
+
+		/* disable DLL_CTRL delay line settings */
+		writel(0x0, host->ioaddr + ESDHC_DLL_CTRL);
+
+		if (imx_data->socdata->flags & ESDHC_FLAG_STD_TUNING) {
+			tmp = readl(host->ioaddr + ESDHC_TUNING_CTRL);
+			tmp |= ESDHC_STD_TUNING_EN |
+				ESDHC_TUNING_START_TAP_DEFAULT;
+			if (imx_data->boarddata.tuning_start_tap) {
+				tmp &= ~ESDHC_TUNING_START_TAP_MASK;
+				tmp |= imx_data->boarddata.tuning_start_tap;
+			}
+
+			if (imx_data->boarddata.tuning_step) {
+				tmp &= ~ESDHC_TUNING_STEP_MASK;
+				tmp |= imx_data->boarddata.tuning_step
+					<< ESDHC_TUNING_STEP_SHIFT;
+			}
+			writel(tmp, host->ioaddr + ESDHC_TUNING_CTRL);
+		}
+	}
+}
+
 #ifdef CONFIG_OF
 static int
 sdhci_esdhc_imx_probe_dt(struct platform_device *pdev,
@@ -975,6 +1040,8 @@ sdhci_esdhc_imx_probe_dt(struct platform_device *pdev,
 		boarddata->wp_type = ESDHC_WP_GPIO;
 
 	of_property_read_u32(np, "fsl,tuning-step", &boarddata->tuning_step);
+	of_property_read_u32(np, "fsl,tuning-start-tap",
+			     &boarddata->tuning_start_tap);
 
 	if (of_find_property(np, "no-1-8-v", NULL))
 		boarddata->support_vsel = false;
@@ -1147,58 +1214,27 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev)
 	if (IS_ERR(imx_data->pins_default))
 		dev_warn(mmc_dev(host->mmc), "could not get default state\n");
 
-	host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
-
 	if (imx_data->socdata->flags & ESDHC_FLAG_ENGCM07207)
 		/* Fix errata ENGcm07207 present on i.MX25 and i.MX35 */
 		host->quirks |= SDHCI_QUIRK_NO_MULTIBLOCK
 			| SDHCI_QUIRK_BROKEN_ADMA;
 
-	/*
-	 * The imx6q ROM code will change the default watermark level setting
-	 * to something insane.  Change it back here.
-	 */
 	if (esdhc_is_usdhc(imx_data)) {
-		writel(0x10401040, host->ioaddr + ESDHC_WTMK_LVL);
-
 		host->quirks2 |= SDHCI_QUIRK2_PRESET_VALUE_BROKEN;
 		host->mmc->caps |= MMC_CAP_1_8V_DDR;
-
-		/*
-		 * ROM code will change the bit burst_length_enable setting
-		 * to zero if this usdhc is choosed to boot system. Change
-		 * it back here, otherwise it will impact the performance a
-		 * lot. This bit is used to enable/disable the burst length
-		 * for the external AHB2AXI bridge, it's usefully especially
-		 * for INCR transfer because without burst length indicator,
-		 * the AHB2AXI bridge does not know the burst length in
-		 * advance. And without burst length indicator, AHB INCR
-		 * transfer can only be converted to singles on the AXI side.
-		 */
-		writel(readl(host->ioaddr + SDHCI_HOST_CONTROL)
-			| ESDHC_BURST_LEN_EN_INCR,
-			host->ioaddr + SDHCI_HOST_CONTROL);
-
 		if (!(imx_data->socdata->flags & ESDHC_FLAG_HS200))
 			host->quirks2 |= SDHCI_QUIRK2_BROKEN_HS200;
 
-		/*
-		* errata ESDHC_FLAG_ERR004536 fix for MX6Q TO1.2 and MX6DL
-		* TO1.1, it's harmless for MX6SL
-		*/
-		writel(readl(host->ioaddr + 0x6c) | BIT(7),
-			host->ioaddr + 0x6c);
+		/* clear tuning bits in case ROM has set it already */
+		writel(0x0, host->ioaddr + ESDHC_MIX_CTRL);
+		writel(0x0, host->ioaddr + SDHCI_ACMD12_ERR);
+		writel(0x0, host->ioaddr + ESDHC_TUNE_CTRL_STATUS);
 	}
 
 	if (imx_data->socdata->flags & ESDHC_FLAG_MAN_TUNING)
 		sdhci_esdhc_ops.platform_execute_tuning =
 					esdhc_executing_tuning;
 
-	if (imx_data->socdata->flags & ESDHC_FLAG_STD_TUNING)
-		writel(readl(host->ioaddr + ESDHC_TUNING_CTRL) |
-			ESDHC_STD_TUNING_EN | ESDHC_TUNING_START_TAP,
-			host->ioaddr + ESDHC_TUNING_CTRL);
-
 	if (imx_data->socdata->flags & ESDHC_FLAG_ERR004536)
 		host->quirks |= SDHCI_QUIRK_BROKEN_ADMA;
 
@@ -1212,6 +1248,8 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev)
 	if (err)
 		goto disable_clk;
 
+	sdhci_esdhc_imx_hwinit(host);
+
 	err = sdhci_add_host(host);
 	if (err)
 		goto disable_clk;
@@ -1255,6 +1293,25 @@ static int sdhci_esdhc_imx_remove(struct platform_device *pdev)
 	return 0;
 }
 
+#ifdef CONFIG_PM_SLEEP
+static int sdhci_esdhc_suspend(struct device *dev)
+{
+	struct sdhci_host *host = dev_get_drvdata(dev);
+
+	return sdhci_suspend_host(host);
+}
+
+static int sdhci_esdhc_resume(struct device *dev)
+{
+	struct sdhci_host *host = dev_get_drvdata(dev);
+
+	/* re-initialize hw state in case it's lost in low power mode */
+	sdhci_esdhc_imx_hwinit(host);
+
+	return sdhci_resume_host(host);
+}
+#endif
+
 #ifdef CONFIG_PM
 static int sdhci_esdhc_runtime_suspend(struct device *dev)
 {
@@ -1291,7 +1348,7 @@ static int sdhci_esdhc_runtime_resume(struct device *dev)
 #endif
 
 static const struct dev_pm_ops sdhci_esdhc_pmops = {
-	SET_SYSTEM_SLEEP_PM_OPS(sdhci_pltfm_suspend, sdhci_pltfm_resume)
+	SET_SYSTEM_SLEEP_PM_OPS(sdhci_esdhc_suspend, sdhci_esdhc_resume)
 	SET_RUNTIME_PM_OPS(sdhci_esdhc_runtime_suspend,
 				sdhci_esdhc_runtime_resume, NULL)
 };