summaryrefslogtreecommitdiff
path: root/drivers/mmc/host
diff options
context:
space:
mode:
authorAndré Fabian Silva Delgado <emulatorman@parabola.nu>2016-03-25 03:53:42 -0300
committerAndré Fabian Silva Delgado <emulatorman@parabola.nu>2016-03-25 03:53:42 -0300
commit03dd4cb26d967f9588437b0fc9cc0e8353322bb7 (patch)
treefa581f6dc1c0596391690d1f67eceef3af8246dc /drivers/mmc/host
parentd4e493caf788ef44982e131ff9c786546904d934 (diff)
Linux-libre 4.5-gnu
Diffstat (limited to 'drivers/mmc/host')
-rw-r--r--drivers/mmc/host/Kconfig1
-rw-r--r--drivers/mmc/host/atmel-mci-regs.h171
-rw-r--r--drivers/mmc/host/atmel-mci.c183
-rw-r--r--drivers/mmc/host/cb710-mmc.h3
-rw-r--r--drivers/mmc/host/dw_mmc-pltfm.c2
-rw-r--r--drivers/mmc/host/dw_mmc-rockchip.c8
-rw-r--r--drivers/mmc/host/dw_mmc.c21
-rw-r--r--drivers/mmc/host/mmc_spi.c15
-rw-r--r--drivers/mmc/host/mmci.c1
-rw-r--r--drivers/mmc/host/mtk-sd.c9
-rw-r--r--drivers/mmc/host/mvsdio.c58
-rw-r--r--drivers/mmc/host/of_mmc_spi.c4
-rw-r--r--drivers/mmc/host/omap_hsmmc.c8
-rw-r--r--drivers/mmc/host/pxamci.c35
-rw-r--r--drivers/mmc/host/sdhci-esdhc-imx.c7
-rw-r--r--drivers/mmc/host/sdhci-of-at91.c76
-rw-r--r--drivers/mmc/host/sdhci-of-esdhc.c10
-rw-r--r--drivers/mmc/host/sdhci-pci-core.c4
-rw-r--r--drivers/mmc/host/sdhci-pltfm.c3
-rw-r--r--drivers/mmc/host/sdhci-tegra.c178
-rw-r--r--drivers/mmc/host/sdhci.c118
-rw-r--r--drivers/mmc/host/sdhci.h21
-rw-r--r--drivers/mmc/host/sh_mmcif.c84
-rw-r--r--drivers/mmc/host/tmio_mmc_dma.c15
24 files changed, 579 insertions, 456 deletions
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 79c57944d..cf8fbaa2f 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -455,6 +455,7 @@ config MMC_TIFM_SD
config MMC_MVSDIO
tristate "Marvell MMC/SD/SDIO host driver"
depends on PLAT_ORION
+ depends on OF
---help---
This selects the Marvell SDIO host driver.
SDIO may currently be found on the Kirkwood 88F6281 and 88F6192
diff --git a/drivers/mmc/host/atmel-mci-regs.h b/drivers/mmc/host/atmel-mci-regs.h
deleted file mode 100644
index 0aa44e679..000000000
--- a/drivers/mmc/host/atmel-mci-regs.h
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- * Atmel MultiMedia Card Interface driver
- *
- * Copyright (C) 2004-2006 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * Superset of MCI IP registers integrated in Atmel AVR32 and AT91 Processors
- * Registers and bitfields marked with [2] are only available in MCI2
- */
-
-#ifndef __DRIVERS_MMC_ATMEL_MCI_H__
-#define __DRIVERS_MMC_ATMEL_MCI_H__
-
-/* MCI Register Definitions */
-#define ATMCI_CR 0x0000 /* Control */
-# define ATMCI_CR_MCIEN ( 1 << 0) /* MCI Enable */
-# define ATMCI_CR_MCIDIS ( 1 << 1) /* MCI Disable */
-# define ATMCI_CR_PWSEN ( 1 << 2) /* Power Save Enable */
-# define ATMCI_CR_PWSDIS ( 1 << 3) /* Power Save Disable */
-# define ATMCI_CR_SWRST ( 1 << 7) /* Software Reset */
-#define ATMCI_MR 0x0004 /* Mode */
-# define ATMCI_MR_CLKDIV(x) ((x) << 0) /* Clock Divider */
-# define ATMCI_MR_PWSDIV(x) ((x) << 8) /* Power Saving Divider */
-# define ATMCI_MR_RDPROOF ( 1 << 11) /* Read Proof */
-# define ATMCI_MR_WRPROOF ( 1 << 12) /* Write Proof */
-# define ATMCI_MR_PDCFBYTE ( 1 << 13) /* Force Byte Transfer */
-# define ATMCI_MR_PDCPADV ( 1 << 14) /* Padding Value */
-# define ATMCI_MR_PDCMODE ( 1 << 15) /* PDC-oriented Mode */
-# define ATMCI_MR_CLKODD(x) ((x) << 16) /* LSB of Clock Divider */
-#define ATMCI_DTOR 0x0008 /* Data Timeout */
-# define ATMCI_DTOCYC(x) ((x) << 0) /* Data Timeout Cycles */
-# define ATMCI_DTOMUL(x) ((x) << 4) /* Data Timeout Multiplier */
-#define ATMCI_SDCR 0x000c /* SD Card / SDIO */
-# define ATMCI_SDCSEL_SLOT_A ( 0 << 0) /* Select SD slot A */
-# define ATMCI_SDCSEL_SLOT_B ( 1 << 0) /* Select SD slot A */
-# define ATMCI_SDCSEL_MASK ( 3 << 0)
-# define ATMCI_SDCBUS_1BIT ( 0 << 6) /* 1-bit data bus */
-# define ATMCI_SDCBUS_4BIT ( 2 << 6) /* 4-bit data bus */
-# define ATMCI_SDCBUS_8BIT ( 3 << 6) /* 8-bit data bus[2] */
-# define ATMCI_SDCBUS_MASK ( 3 << 6)
-#define ATMCI_ARGR 0x0010 /* Command Argument */
-#define ATMCI_CMDR 0x0014 /* Command */
-# define ATMCI_CMDR_CMDNB(x) ((x) << 0) /* Command Opcode */
-# define ATMCI_CMDR_RSPTYP_NONE ( 0 << 6) /* No response */
-# define ATMCI_CMDR_RSPTYP_48BIT ( 1 << 6) /* 48-bit response */
-# define ATMCI_CMDR_RSPTYP_136BIT ( 2 << 6) /* 136-bit response */
-# define ATMCI_CMDR_SPCMD_INIT ( 1 << 8) /* Initialization command */
-# define ATMCI_CMDR_SPCMD_SYNC ( 2 << 8) /* Synchronized command */
-# define ATMCI_CMDR_SPCMD_INT ( 4 << 8) /* Interrupt command */
-# define ATMCI_CMDR_SPCMD_INTRESP ( 5 << 8) /* Interrupt response */
-# define ATMCI_CMDR_OPDCMD ( 1 << 11) /* Open Drain */
-# define ATMCI_CMDR_MAXLAT_5CYC ( 0 << 12) /* Max latency 5 cycles */
-# define ATMCI_CMDR_MAXLAT_64CYC ( 1 << 12) /* Max latency 64 cycles */
-# define ATMCI_CMDR_START_XFER ( 1 << 16) /* Start data transfer */
-# define ATMCI_CMDR_STOP_XFER ( 2 << 16) /* Stop data transfer */
-# define ATMCI_CMDR_TRDIR_WRITE ( 0 << 18) /* Write data */
-# define ATMCI_CMDR_TRDIR_READ ( 1 << 18) /* Read data */
-# define ATMCI_CMDR_BLOCK ( 0 << 19) /* Single-block transfer */
-# define ATMCI_CMDR_MULTI_BLOCK ( 1 << 19) /* Multi-block transfer */
-# define ATMCI_CMDR_STREAM ( 2 << 19) /* MMC Stream transfer */
-# define ATMCI_CMDR_SDIO_BYTE ( 4 << 19) /* SDIO Byte transfer */
-# define ATMCI_CMDR_SDIO_BLOCK ( 5 << 19) /* SDIO Block transfer */
-# define ATMCI_CMDR_SDIO_SUSPEND ( 1 << 24) /* SDIO Suspend Command */
-# define ATMCI_CMDR_SDIO_RESUME ( 2 << 24) /* SDIO Resume Command */
-#define ATMCI_BLKR 0x0018 /* Block */
-# define ATMCI_BCNT(x) ((x) << 0) /* Data Block Count */
-# define ATMCI_BLKLEN(x) ((x) << 16) /* Data Block Length */
-#define ATMCI_CSTOR 0x001c /* Completion Signal Timeout[2] */
-# define ATMCI_CSTOCYC(x) ((x) << 0) /* CST cycles */
-# define ATMCI_CSTOMUL(x) ((x) << 4) /* CST multiplier */
-#define ATMCI_RSPR 0x0020 /* Response 0 */
-#define ATMCI_RSPR1 0x0024 /* Response 1 */
-#define ATMCI_RSPR2 0x0028 /* Response 2 */
-#define ATMCI_RSPR3 0x002c /* Response 3 */
-#define ATMCI_RDR 0x0030 /* Receive Data */
-#define ATMCI_TDR 0x0034 /* Transmit Data */
-#define ATMCI_SR 0x0040 /* Status */
-#define ATMCI_IER 0x0044 /* Interrupt Enable */
-#define ATMCI_IDR 0x0048 /* Interrupt Disable */
-#define ATMCI_IMR 0x004c /* Interrupt Mask */
-# define ATMCI_CMDRDY ( 1 << 0) /* Command Ready */
-# define ATMCI_RXRDY ( 1 << 1) /* Receiver Ready */
-# define ATMCI_TXRDY ( 1 << 2) /* Transmitter Ready */
-# define ATMCI_BLKE ( 1 << 3) /* Data Block Ended */
-# define ATMCI_DTIP ( 1 << 4) /* Data Transfer In Progress */
-# define ATMCI_NOTBUSY ( 1 << 5) /* Data Not Busy */
-# define ATMCI_ENDRX ( 1 << 6) /* End of RX Buffer */
-# define ATMCI_ENDTX ( 1 << 7) /* End of TX Buffer */
-# define ATMCI_SDIOIRQA ( 1 << 8) /* SDIO IRQ in slot A */
-# define ATMCI_SDIOIRQB ( 1 << 9) /* SDIO IRQ in slot B */
-# define ATMCI_SDIOWAIT ( 1 << 12) /* SDIO Read Wait Operation Status */
-# define ATMCI_CSRCV ( 1 << 13) /* CE-ATA Completion Signal Received */
-# define ATMCI_RXBUFF ( 1 << 14) /* RX Buffer Full */
-# define ATMCI_TXBUFE ( 1 << 15) /* TX Buffer Empty */
-# define ATMCI_RINDE ( 1 << 16) /* Response Index Error */
-# define ATMCI_RDIRE ( 1 << 17) /* Response Direction Error */
-# define ATMCI_RCRCE ( 1 << 18) /* Response CRC Error */
-# define ATMCI_RENDE ( 1 << 19) /* Response End Bit Error */
-# define ATMCI_RTOE ( 1 << 20) /* Response Time-Out Error */
-# define ATMCI_DCRCE ( 1 << 21) /* Data CRC Error */
-# define ATMCI_DTOE ( 1 << 22) /* Data Time-Out Error */
-# define ATMCI_CSTOE ( 1 << 23) /* Completion Signal Time-out Error */
-# define ATMCI_BLKOVRE ( 1 << 24) /* DMA Block Overrun Error */
-# define ATMCI_DMADONE ( 1 << 25) /* DMA Transfer Done */
-# define ATMCI_FIFOEMPTY ( 1 << 26) /* FIFO Empty Flag */
-# define ATMCI_XFRDONE ( 1 << 27) /* Transfer Done Flag */
-# define ATMCI_ACKRCV ( 1 << 28) /* Boot Operation Acknowledge Received */
-# define ATMCI_ACKRCVE ( 1 << 29) /* Boot Operation Acknowledge Error */
-# define ATMCI_OVRE ( 1 << 30) /* RX Overrun Error */
-# define ATMCI_UNRE ( 1 << 31) /* TX Underrun Error */
-#define ATMCI_DMA 0x0050 /* DMA Configuration[2] */
-# define ATMCI_DMA_OFFSET(x) ((x) << 0) /* DMA Write Buffer Offset */
-# define ATMCI_DMA_CHKSIZE(x) ((x) << 4) /* DMA Channel Read and Write Chunk Size */
-# define ATMCI_DMAEN ( 1 << 8) /* DMA Hardware Handshaking Enable */
-#define ATMCI_CFG 0x0054 /* Configuration[2] */
-# define ATMCI_CFG_FIFOMODE_1DATA ( 1 << 0) /* MCI Internal FIFO control mode */
-# define ATMCI_CFG_FERRCTRL_COR ( 1 << 4) /* Flow Error flag reset control mode */
-# define ATMCI_CFG_HSMODE ( 1 << 8) /* High Speed Mode */
-# define ATMCI_CFG_LSYNC ( 1 << 12) /* Synchronize on the last block */
-#define ATMCI_WPMR 0x00e4 /* Write Protection Mode[2] */
-# define ATMCI_WP_EN ( 1 << 0) /* WP Enable */
-# define ATMCI_WP_KEY (0x4d4349 << 8) /* WP Key */
-#define ATMCI_WPSR 0x00e8 /* Write Protection Status[2] */
-# define ATMCI_GET_WP_VS(x) ((x) & 0x0f)
-# define ATMCI_GET_WP_VSRC(x) (((x) >> 8) & 0xffff)
-#define ATMCI_VERSION 0x00FC /* Version */
-#define ATMCI_FIFO_APERTURE 0x0200 /* FIFO Aperture[2] */
-
-/* This is not including the FIFO Aperture on MCI2 */
-#define ATMCI_REGS_SIZE 0x100
-
-/* Register access macros */
-#ifdef CONFIG_AVR32
-#define atmci_readl(port, reg) \
- __raw_readl((port)->regs + reg)
-#define atmci_writel(port, reg, value) \
- __raw_writel((value), (port)->regs + reg)
-#else
-#define atmci_readl(port, reg) \
- readl_relaxed((port)->regs + reg)
-#define atmci_writel(port, reg, value) \
- writel_relaxed((value), (port)->regs + reg)
-#endif
-
-/* On AVR chips the Peripheral DMA Controller is not connected to MCI. */
-#ifdef CONFIG_AVR32
-# define ATMCI_PDC_CONNECTED 0
-#else
-# define ATMCI_PDC_CONNECTED 1
-#endif
-
-/*
- * Fix sconfig's burst size according to atmel MCI. We need to convert them as:
- * 1 -> 0, 4 -> 1, 8 -> 2, 16 -> 3.
- *
- * This can be done by finding most significant bit set.
- */
-static inline unsigned int atmci_convert_chksize(unsigned int maxburst)
-{
- if (maxburst > 1)
- return fls(maxburst) - 2;
- else
- return 0;
-}
-
-#endif /* __DRIVERS_MMC_ATMEL_MCI_H__ */
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index bf62e429f..851ccd9ac 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -29,7 +29,6 @@
#include <linux/slab.h>
#include <linux/stat.h>
#include <linux/types.h>
-#include <linux/platform_data/mmc-atmel-mci.h>
#include <linux/mmc/host.h>
#include <linux/mmc/sdio.h>
@@ -44,7 +43,141 @@
#include <asm/io.h>
#include <asm/unaligned.h>
-#include "atmel-mci-regs.h"
+/*
+ * Superset of MCI IP registers integrated in Atmel AVR32 and AT91 Processors
+ * Registers and bitfields marked with [2] are only available in MCI2
+ */
+
+/* MCI Register Definitions */
+#define ATMCI_CR 0x0000 /* Control */
+#define ATMCI_CR_MCIEN BIT(0) /* MCI Enable */
+#define ATMCI_CR_MCIDIS BIT(1) /* MCI Disable */
+#define ATMCI_CR_PWSEN BIT(2) /* Power Save Enable */
+#define ATMCI_CR_PWSDIS BIT(3) /* Power Save Disable */
+#define ATMCI_CR_SWRST BIT(7) /* Software Reset */
+#define ATMCI_MR 0x0004 /* Mode */
+#define ATMCI_MR_CLKDIV(x) ((x) << 0) /* Clock Divider */
+#define ATMCI_MR_PWSDIV(x) ((x) << 8) /* Power Saving Divider */
+#define ATMCI_MR_RDPROOF BIT(11) /* Read Proof */
+#define ATMCI_MR_WRPROOF BIT(12) /* Write Proof */
+#define ATMCI_MR_PDCFBYTE BIT(13) /* Force Byte Transfer */
+#define ATMCI_MR_PDCPADV BIT(14) /* Padding Value */
+#define ATMCI_MR_PDCMODE BIT(15) /* PDC-oriented Mode */
+#define ATMCI_MR_CLKODD(x) ((x) << 16) /* LSB of Clock Divider */
+#define ATMCI_DTOR 0x0008 /* Data Timeout */
+#define ATMCI_DTOCYC(x) ((x) << 0) /* Data Timeout Cycles */
+#define ATMCI_DTOMUL(x) ((x) << 4) /* Data Timeout Multiplier */
+#define ATMCI_SDCR 0x000c /* SD Card / SDIO */
+#define ATMCI_SDCSEL_SLOT_A (0 << 0) /* Select SD slot A */
+#define ATMCI_SDCSEL_SLOT_B (1 << 0) /* Select SD slot A */
+#define ATMCI_SDCSEL_MASK (3 << 0)
+#define ATMCI_SDCBUS_1BIT (0 << 6) /* 1-bit data bus */
+#define ATMCI_SDCBUS_4BIT (2 << 6) /* 4-bit data bus */
+#define ATMCI_SDCBUS_8BIT (3 << 6) /* 8-bit data bus[2] */
+#define ATMCI_SDCBUS_MASK (3 << 6)
+#define ATMCI_ARGR 0x0010 /* Command Argument */
+#define ATMCI_CMDR 0x0014 /* Command */
+#define ATMCI_CMDR_CMDNB(x) ((x) << 0) /* Command Opcode */
+#define ATMCI_CMDR_RSPTYP_NONE (0 << 6) /* No response */
+#define ATMCI_CMDR_RSPTYP_48BIT (1 << 6) /* 48-bit response */
+#define ATMCI_CMDR_RSPTYP_136BIT (2 << 6) /* 136-bit response */
+#define ATMCI_CMDR_SPCMD_INIT (1 << 8) /* Initialization command */
+#define ATMCI_CMDR_SPCMD_SYNC (2 << 8) /* Synchronized command */
+#define ATMCI_CMDR_SPCMD_INT (4 << 8) /* Interrupt command */
+#define ATMCI_CMDR_SPCMD_INTRESP (5 << 8) /* Interrupt response */
+#define ATMCI_CMDR_OPDCMD (1 << 11) /* Open Drain */
+#define ATMCI_CMDR_MAXLAT_5CYC (0 << 12) /* Max latency 5 cycles */
+#define ATMCI_CMDR_MAXLAT_64CYC (1 << 12) /* Max latency 64 cycles */
+#define ATMCI_CMDR_START_XFER (1 << 16) /* Start data transfer */
+#define ATMCI_CMDR_STOP_XFER (2 << 16) /* Stop data transfer */
+#define ATMCI_CMDR_TRDIR_WRITE (0 << 18) /* Write data */
+#define ATMCI_CMDR_TRDIR_READ (1 << 18) /* Read data */
+#define ATMCI_CMDR_BLOCK (0 << 19) /* Single-block transfer */
+#define ATMCI_CMDR_MULTI_BLOCK (1 << 19) /* Multi-block transfer */
+#define ATMCI_CMDR_STREAM (2 << 19) /* MMC Stream transfer */
+#define ATMCI_CMDR_SDIO_BYTE (4 << 19) /* SDIO Byte transfer */
+#define ATMCI_CMDR_SDIO_BLOCK (5 << 19) /* SDIO Block transfer */
+#define ATMCI_CMDR_SDIO_SUSPEND (1 << 24) /* SDIO Suspend Command */
+#define ATMCI_CMDR_SDIO_RESUME (2 << 24) /* SDIO Resume Command */
+#define ATMCI_BLKR 0x0018 /* Block */
+#define ATMCI_BCNT(x) ((x) << 0) /* Data Block Count */
+#define ATMCI_BLKLEN(x) ((x) << 16) /* Data Block Length */
+#define ATMCI_CSTOR 0x001c /* Completion Signal Timeout[2] */
+#define ATMCI_CSTOCYC(x) ((x) << 0) /* CST cycles */
+#define ATMCI_CSTOMUL(x) ((x) << 4) /* CST multiplier */
+#define ATMCI_RSPR 0x0020 /* Response 0 */
+#define ATMCI_RSPR1 0x0024 /* Response 1 */
+#define ATMCI_RSPR2 0x0028 /* Response 2 */
+#define ATMCI_RSPR3 0x002c /* Response 3 */
+#define ATMCI_RDR 0x0030 /* Receive Data */
+#define ATMCI_TDR 0x0034 /* Transmit Data */
+#define ATMCI_SR 0x0040 /* Status */
+#define ATMCI_IER 0x0044 /* Interrupt Enable */
+#define ATMCI_IDR 0x0048 /* Interrupt Disable */
+#define ATMCI_IMR 0x004c /* Interrupt Mask */
+#define ATMCI_CMDRDY BIT(0) /* Command Ready */
+#define ATMCI_RXRDY BIT(1) /* Receiver Ready */
+#define ATMCI_TXRDY BIT(2) /* Transmitter Ready */
+#define ATMCI_BLKE BIT(3) /* Data Block Ended */
+#define ATMCI_DTIP BIT(4) /* Data Transfer In Progress */
+#define ATMCI_NOTBUSY BIT(5) /* Data Not Busy */
+#define ATMCI_ENDRX BIT(6) /* End of RX Buffer */
+#define ATMCI_ENDTX BIT(7) /* End of TX Buffer */
+#define ATMCI_SDIOIRQA BIT(8) /* SDIO IRQ in slot A */
+#define ATMCI_SDIOIRQB BIT(9) /* SDIO IRQ in slot B */
+#define ATMCI_SDIOWAIT BIT(12) /* SDIO Read Wait Operation Status */
+#define ATMCI_CSRCV BIT(13) /* CE-ATA Completion Signal Received */
+#define ATMCI_RXBUFF BIT(14) /* RX Buffer Full */
+#define ATMCI_TXBUFE BIT(15) /* TX Buffer Empty */
+#define ATMCI_RINDE BIT(16) /* Response Index Error */
+#define ATMCI_RDIRE BIT(17) /* Response Direction Error */
+#define ATMCI_RCRCE BIT(18) /* Response CRC Error */
+#define ATMCI_RENDE BIT(19) /* Response End Bit Error */
+#define ATMCI_RTOE BIT(20) /* Response Time-Out Error */
+#define ATMCI_DCRCE BIT(21) /* Data CRC Error */
+#define ATMCI_DTOE BIT(22) /* Data Time-Out Error */
+#define ATMCI_CSTOE BIT(23) /* Completion Signal Time-out Error */
+#define ATMCI_BLKOVRE BIT(24) /* DMA Block Overrun Error */
+#define ATMCI_DMADONE BIT(25) /* DMA Transfer Done */
+#define ATMCI_FIFOEMPTY BIT(26) /* FIFO Empty Flag */
+#define ATMCI_XFRDONE BIT(27) /* Transfer Done Flag */
+#define ATMCI_ACKRCV BIT(28) /* Boot Operation Acknowledge Received */
+#define ATMCI_ACKRCVE BIT(29) /* Boot Operation Acknowledge Error */
+#define ATMCI_OVRE BIT(30) /* RX Overrun Error */
+#define ATMCI_UNRE BIT(31) /* TX Underrun Error */
+#define ATMCI_DMA 0x0050 /* DMA Configuration[2] */
+#define ATMCI_DMA_OFFSET(x) ((x) << 0) /* DMA Write Buffer Offset */
+#define ATMCI_DMA_CHKSIZE(x) ((x) << 4) /* DMA Channel Read and Write Chunk Size */
+#define ATMCI_DMAEN BIT(8) /* DMA Hardware Handshaking Enable */
+#define ATMCI_CFG 0x0054 /* Configuration[2] */
+#define ATMCI_CFG_FIFOMODE_1DATA BIT(0) /* MCI Internal FIFO control mode */
+#define ATMCI_CFG_FERRCTRL_COR BIT(4) /* Flow Error flag reset control mode */
+#define ATMCI_CFG_HSMODE BIT(8) /* High Speed Mode */
+#define ATMCI_CFG_LSYNC BIT(12) /* Synchronize on the last block */
+#define ATMCI_WPMR 0x00e4 /* Write Protection Mode[2] */
+#define ATMCI_WP_EN BIT(0) /* WP Enable */
+#define ATMCI_WP_KEY (0x4d4349 << 8) /* WP Key */
+#define ATMCI_WPSR 0x00e8 /* Write Protection Status[2] */
+#define ATMCI_GET_WP_VS(x) ((x) & 0x0f)
+#define ATMCI_GET_WP_VSRC(x) (((x) >> 8) & 0xffff)
+#define ATMCI_VERSION 0x00FC /* Version */
+#define ATMCI_FIFO_APERTURE 0x0200 /* FIFO Aperture[2] */
+
+/* This is not including the FIFO Aperture on MCI2 */
+#define ATMCI_REGS_SIZE 0x100
+
+/* Register access macros */
+#define atmci_readl(port, reg) \
+ __raw_readl((port)->regs + reg)
+#define atmci_writel(port, reg, value) \
+ __raw_writel((value), (port)->regs + reg)
+
+/* On AVR chips the Peripheral DMA Controller is not connected to MCI. */
+#ifdef CONFIG_AVR32
+# define ATMCI_PDC_CONNECTED 0
+#else
+# define ATMCI_PDC_CONNECTED 1
+#endif
#define AUTOSUSPEND_DELAY 50
@@ -584,6 +717,29 @@ static inline unsigned int atmci_get_version(struct atmel_mci *host)
return atmci_readl(host, ATMCI_VERSION) & 0x00000fff;
}
+/*
+ * Fix sconfig's burst size according to atmel MCI. We need to convert them as:
+ * 1 -> 0, 4 -> 1, 8 -> 2, 16 -> 3.
+ * With version 0x600, we need to convert them as: 1 -> 0, 2 -> 1, 4 -> 2,
+ * 8 -> 3, 16 -> 4.
+ *
+ * This can be done by finding most significant bit set.
+ */
+static inline unsigned int atmci_convert_chksize(struct atmel_mci *host,
+ unsigned int maxburst)
+{
+ unsigned int version = atmci_get_version(host);
+ unsigned int offset = 2;
+
+ if (version >= 0x600)
+ offset = 1;
+
+ if (maxburst > 1)
+ return fls(maxburst) - offset;
+ else
+ return 0;
+}
+
static void atmci_timeout_timer(unsigned long data)
{
struct atmel_mci *host;
@@ -1034,11 +1190,13 @@ atmci_prepare_data_dma(struct atmel_mci *host, struct mmc_data *data)
if (data->flags & MMC_DATA_READ) {
direction = DMA_FROM_DEVICE;
host->dma_conf.direction = slave_dirn = DMA_DEV_TO_MEM;
- maxburst = atmci_convert_chksize(host->dma_conf.src_maxburst);
+ maxburst = atmci_convert_chksize(host,
+ host->dma_conf.src_maxburst);
} else {
direction = DMA_TO_DEVICE;
host->dma_conf.direction = slave_dirn = DMA_MEM_TO_DEV;
- maxburst = atmci_convert_chksize(host->dma_conf.dst_maxburst);
+ maxburst = atmci_convert_chksize(host,
+ host->dma_conf.dst_maxburst);
}
if (host->caps.has_dma_conf_reg)
@@ -2280,6 +2438,23 @@ static int atmci_configure_dma(struct atmel_mci *host)
{
host->dma.chan = dma_request_slave_channel_reason(&host->pdev->dev,
"rxtx");
+
+ if (PTR_ERR(host->dma.chan) == -ENODEV) {
+ struct mci_platform_data *pdata = host->pdev->dev.platform_data;
+ dma_cap_mask_t mask;
+
+ if (!pdata->dma_filter)
+ return -ENODEV;
+
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
+
+ host->dma.chan = dma_request_channel(mask, pdata->dma_filter,
+ pdata->dma_slave);
+ if (!host->dma.chan)
+ host->dma.chan = ERR_PTR(-ENODEV);
+ }
+
if (IS_ERR(host->dma.chan))
return PTR_ERR(host->dma.chan);
diff --git a/drivers/mmc/host/cb710-mmc.h b/drivers/mmc/host/cb710-mmc.h
index 8984ec878..8ecd9e566 100644
--- a/drivers/mmc/host/cb710-mmc.h
+++ b/drivers/mmc/host/cb710-mmc.h
@@ -29,8 +29,7 @@ static inline struct mmc_host *cb710_slot_to_mmc(struct cb710_slot *slot)
static inline struct cb710_slot *cb710_mmc_to_slot(struct mmc_host *mmc)
{
- struct platform_device *pdev = container_of(mmc_dev(mmc),
- struct platform_device, dev);
+ struct platform_device *pdev = to_platform_device(mmc_dev(mmc));
return cb710_pdev_to_slot(pdev);
}
diff --git a/drivers/mmc/host/dw_mmc-pltfm.c b/drivers/mmc/host/dw_mmc-pltfm.c
index 7e1d13b68..81bdeeb05 100644
--- a/drivers/mmc/host/dw_mmc-pltfm.c
+++ b/drivers/mmc/host/dw_mmc-pltfm.c
@@ -60,7 +60,7 @@ int dw_mci_pltfm_register(struct platform_device *pdev,
regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
/* Get registers' physical base address */
- host->phy_regs = (void *)(regs->start);
+ host->phy_regs = regs->start;
host->regs = devm_ioremap_resource(&pdev->dev, regs);
if (IS_ERR(host->regs))
return PTR_ERR(host->regs);
diff --git a/drivers/mmc/host/dw_mmc-rockchip.c b/drivers/mmc/host/dw_mmc-rockchip.c
index 9becebeec..d9c92f31d 100644
--- a/drivers/mmc/host/dw_mmc-rockchip.c
+++ b/drivers/mmc/host/dw_mmc-rockchip.c
@@ -239,20 +239,12 @@ static int dw_mci_rockchip_init(struct dw_mci *host)
return 0;
}
-/* Common capabilities of RK3288 SoC */
-static unsigned long dw_mci_rk3288_dwmmc_caps[4] = {
- MMC_CAP_RUNTIME_RESUME, /* emmc */
- MMC_CAP_RUNTIME_RESUME, /* sdmmc */
- MMC_CAP_RUNTIME_RESUME, /* sdio0 */
- MMC_CAP_RUNTIME_RESUME, /* sdio1 */
-};
static const struct dw_mci_drv_data rk2928_drv_data = {
.prepare_command = dw_mci_rockchip_prepare_command,
.init = dw_mci_rockchip_init,
};
static const struct dw_mci_drv_data rk3288_drv_data = {
- .caps = dw_mci_rk3288_dwmmc_caps,
.prepare_command = dw_mci_rockchip_prepare_command,
.set_ios = dw_mci_rk3288_set_ios,
.execute_tuning = dw_mci_rk3288_execute_tuning,
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index 7a6cedbe4..712835177 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -699,7 +699,7 @@ static int dw_mci_edmac_start_dma(struct dw_mci *host,
int ret = 0;
/* Set external dma config: burst size, burst width */
- cfg.dst_addr = (dma_addr_t)(host->phy_regs + fifo_offset);
+ cfg.dst_addr = host->phy_regs + fifo_offset;
cfg.src_addr = cfg.dst_addr;
cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
@@ -1634,12 +1634,6 @@ static int dw_mci_command_complete(struct dw_mci *host, struct mmc_command *cmd)
else
cmd->error = 0;
- if (cmd->error) {
- /* newer ip versions need a delay between retries */
- if (host->quirks & DW_MCI_QUIRK_RETRY_DELAY)
- mdelay(20);
- }
-
return cmd->error;
}
@@ -2355,16 +2349,6 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
pending = mci_readl(host, MINTSTS); /* read-only mask reg */
- /*
- * DTO fix - version 2.10a and below, and only if internal DMA
- * is configured.
- */
- if (host->quirks & DW_MCI_QUIRK_IDMAC_DTO) {
- if (!pending &&
- ((mci_readl(host, STATUS) >> 17) & 0x1fff))
- pending |= SDMMC_INT_DATA_OVER;
- }
-
if (pending) {
/* Check volt switch first, since it can look like an error */
if ((host->state == STATE_SENDING_CMD11) &&
@@ -3165,9 +3149,6 @@ int dw_mci_probe(struct dw_mci *host)
/* Now that slots are all setup, we can enable card detect */
dw_mci_enable_cd(host);
- if (host->quirks & DW_MCI_QUIRK_IDMAC_DTO)
- dev_info(host->dev, "Internal DMAC interrupt fix enabled.\n");
-
return 0;
err_dmaunmap:
diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c
index 1c1b45ef3..3446097a4 100644
--- a/drivers/mmc/host/mmc_spi.c
+++ b/drivers/mmc/host/mmc_spi.c
@@ -925,6 +925,10 @@ mmc_spi_data_do(struct mmc_spi_host *host, struct mmc_command *cmd,
dma_addr = dma_map_page(dma_dev, sg_page(sg), 0,
PAGE_SIZE, dir);
+ if (dma_mapping_error(dma_dev, dma_addr)) {
+ data->error = -EFAULT;
+ break;
+ }
if (direction == DMA_TO_DEVICE)
t->tx_dma = dma_addr + sg->offset;
else
@@ -1393,10 +1397,12 @@ static int mmc_spi_probe(struct spi_device *spi)
host->dma_dev = dev;
host->ones_dma = dma_map_single(dev, ones,
MMC_SPI_BLOCKSIZE, DMA_TO_DEVICE);
+ if (dma_mapping_error(dev, host->ones_dma))
+ goto fail_ones_dma;
host->data_dma = dma_map_single(dev, host->data,
sizeof(*host->data), DMA_BIDIRECTIONAL);
-
- /* REVISIT in theory those map operations can fail... */
+ if (dma_mapping_error(dev, host->data_dma))
+ goto fail_data_dma;
dma_sync_single_for_cpu(host->dma_dev,
host->data_dma, sizeof(*host->data),
@@ -1462,6 +1468,11 @@ fail_glue_init:
if (host->dma_dev)
dma_unmap_single(host->dma_dev, host->data_dma,
sizeof(*host->data), DMA_BIDIRECTIONAL);
+fail_data_dma:
+ if (host->dma_dev)
+ dma_unmap_single(host->dma_dev, host->ones_dma,
+ MMC_SPI_BLOCKSIZE, DMA_TO_DEVICE);
+fail_ones_dma:
kfree(host->data);
fail_nobuf1:
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index acece3299..0d6ca4116 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -151,6 +151,7 @@ static struct variant_data variant_nomadik = {
.fifosize = 16 * 4,
.fifohalfsize = 8 * 4,
.clkreg = MCI_CLK_ENABLE,
+ .clkreg_8bit_bus_enable = MCI_ST_8BIT_BUS,
.datalength_bits = 24,
.datactrl_mask_sdio = MCI_ST_DPSM_SDIOEN,
.st_sdio = true,
diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 33dfd7e72..82a97ac4e 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -972,7 +972,7 @@ static bool msdc_data_xfer_done(struct msdc_host *host, u32 events,
if ((events & MSDC_INT_XFER_COMPL) && (!stop || !stop->error)) {
data->bytes_xfered = data->blocks * data->blksz;
} else {
- dev_err(host->dev, "interrupt events: %x\n", events);
+ dev_dbg(host->dev, "interrupt events: %x\n", events);
msdc_reset_hw(host);
host->error |= REQ_DAT_ERR;
data->bytes_xfered = 0;
@@ -982,10 +982,10 @@ static bool msdc_data_xfer_done(struct msdc_host *host, u32 events,
else if (events & MSDC_INT_DATCRCERR)
data->error = -EILSEQ;
- dev_err(host->dev, "%s: cmd=%d; blocks=%d",
+ dev_dbg(host->dev, "%s: cmd=%d; blocks=%d",
__func__, mrq->cmd->opcode, data->blocks);
- dev_err(host->dev, "data_error=%d xfer_size=%d\n",
- (int)data->error, data->bytes_xfered);
+ dev_dbg(host->dev, "data_error=%d xfer_size=%d\n",
+ (int)data->error, data->bytes_xfered);
}
msdc_data_xfer_next(host, mrq, data);
@@ -1543,7 +1543,6 @@ static int msdc_drv_probe(struct platform_device *pdev)
mmc->f_min = host->src_clk_freq / (4 * 255);
mmc->caps |= MMC_CAP_ERASE | MMC_CAP_CMD23;
- mmc->caps |= MMC_CAP_RUNTIME_RESUME;
/* MMC core transfer sizes tunable parameters */
mmc->max_segs = MAX_BD_NUM;
mmc->max_seg_size = BDMA_DESC_BUFLEN;
diff --git a/drivers/mmc/host/mvsdio.c b/drivers/mmc/host/mvsdio.c
index a448498e3..42296e55b 100644
--- a/drivers/mmc/host/mvsdio.c
+++ b/drivers/mmc/host/mvsdio.c
@@ -20,15 +20,12 @@
#include <linux/scatterlist.h>
#include <linux/irq.h>
#include <linux/clk.h>
-#include <linux/gpio.h>
-#include <linux/of_gpio.h>
#include <linux/of_irq.h>
#include <linux/mmc/host.h>
#include <linux/mmc/slot-gpio.h>
#include <asm/sizes.h>
#include <asm/unaligned.h>
-#include <linux/platform_data/mmc-mvsdio.h>
#include "mvsdio.h"
@@ -704,6 +701,10 @@ static int mvsd_probe(struct platform_device *pdev)
struct resource *r;
int ret, irq;
+ if (!np) {
+ dev_err(&pdev->dev, "no DT node\n");
+ return -ENODEV;
+ }
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
irq = platform_get_irq(pdev, 0);
if (!r || irq < 0)
@@ -727,8 +728,12 @@ static int mvsd_probe(struct platform_device *pdev)
* fixed rate clock).
*/
host->clk = devm_clk_get(&pdev->dev, NULL);
- if (!IS_ERR(host->clk))
- clk_prepare_enable(host->clk);
+ if (IS_ERR(host->clk)) {
+ dev_err(&pdev->dev, "no clock associated\n");
+ ret = -EINVAL;
+ goto out;
+ }
+ clk_prepare_enable(host->clk);
mmc->ops = &mvsd_ops;
@@ -744,45 +749,10 @@ static int mvsd_probe(struct platform_device *pdev)
mmc->max_seg_size = mmc->max_blk_size * mmc->max_blk_count;
mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
- if (np) {
- if (IS_ERR(host->clk)) {
- dev_err(&pdev->dev, "DT platforms must have a clock associated\n");
- ret = -EINVAL;
- goto out;
- }
-
- host->base_clock = clk_get_rate(host->clk) / 2;
- ret = mmc_of_parse(mmc);
- if (ret < 0)
- goto out;
- } else {
- const struct mvsdio_platform_data *mvsd_data;
-
- mvsd_data = pdev->dev.platform_data;
- if (!mvsd_data) {
- ret = -ENXIO;
- goto out;
- }
- mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ |
- MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED;
- host->base_clock = mvsd_data->clock / 2;
- /* GPIO 0 regarded as invalid for backward compatibility */
- if (mvsd_data->gpio_card_detect &&
- gpio_is_valid(mvsd_data->gpio_card_detect)) {
- ret = mmc_gpio_request_cd(mmc,
- mvsd_data->gpio_card_detect,
- 0);
- if (ret)
- goto out;
- } else {
- mmc->caps |= MMC_CAP_NEEDS_POLL;
- }
-
- if (mvsd_data->gpio_write_protect &&
- gpio_is_valid(mvsd_data->gpio_write_protect))
- mmc_gpio_request_ro(mmc, mvsd_data->gpio_write_protect);
- }
-
+ host->base_clock = clk_get_rate(host->clk) / 2;
+ ret = mmc_of_parse(mmc);
+ if (ret < 0)
+ goto out;
if (maxfreq)
mmc->f_max = maxfreq;
diff --git a/drivers/mmc/host/of_mmc_spi.c b/drivers/mmc/host/of_mmc_spi.c
index 6e218fb1a..660170cd0 100644
--- a/drivers/mmc/host/of_mmc_spi.c
+++ b/drivers/mmc/host/of_mmc_spi.c
@@ -55,8 +55,8 @@ static int of_mmc_spi_init(struct device *dev,
{
struct of_mmc_spi *oms = to_of_mmc_spi(dev);
- return request_threaded_irq(oms->detect_irq, NULL, irqhandler, 0,
- dev_name(dev), mmc);
+ return request_threaded_irq(oms->detect_irq, NULL, irqhandler,
+ IRQF_ONESHOT, dev_name(dev), mmc);
}
static void of_mmc_spi_exit(struct device *dev, void *mmc)
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 7fb0753ab..f6e4d9718 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -2232,6 +2232,7 @@ err_irq:
dma_release_channel(host->tx_chan);
if (host->rx_chan)
dma_release_channel(host->rx_chan);
+ pm_runtime_dont_use_autosuspend(host->dev);
pm_runtime_put_sync(host->dev);
pm_runtime_disable(host->dev);
if (host->dbclk)
@@ -2250,11 +2251,10 @@ static int omap_hsmmc_remove(struct platform_device *pdev)
pm_runtime_get_sync(host->dev);
mmc_remove_host(host->mmc);
- if (host->tx_chan)
- dma_release_channel(host->tx_chan);
- if (host->rx_chan)
- dma_release_channel(host->rx_chan);
+ dma_release_channel(host->tx_chan);
+ dma_release_channel(host->rx_chan);
+ pm_runtime_dont_use_autosuspend(host->dev);
pm_runtime_put_sync(host->dev);
pm_runtime_disable(host->dev);
device_init_wakeup(&pdev->dev, false);
diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
index 28a057fae..da824772b 100644
--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -86,7 +86,7 @@ struct pxamci_host {
static inline void pxamci_init_ocr(struct pxamci_host *host)
{
#ifdef CONFIG_REGULATOR
- host->vcc = regulator_get_optional(mmc_dev(host->mmc), "vmmc");
+ host->vcc = devm_regulator_get_optional(mmc_dev(host->mmc), "vmmc");
if (IS_ERR(host->vcc))
host->vcc = NULL;
@@ -654,12 +654,8 @@ static int pxamci_probe(struct platform_device *pdev)
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
irq = platform_get_irq(pdev, 0);
- if (!r || irq < 0)
- return -ENXIO;
-
- r = request_mem_region(r->start, SZ_4K, DRIVER_NAME);
- if (!r)
- return -EBUSY;
+ if (irq < 0)
+ return irq;
mmc = mmc_alloc_host(sizeof(struct pxamci_host), &pdev->dev);
if (!mmc) {
@@ -695,7 +691,7 @@ static int pxamci_probe(struct platform_device *pdev)
host->pdata = pdev->dev.platform_data;
host->clkrt = CLKRT_OFF;
- host->clk = clk_get(&pdev->dev, NULL);
+ host->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(host->clk)) {
ret = PTR_ERR(host->clk);
host->clk = NULL;
@@ -727,9 +723,9 @@ static int pxamci_probe(struct platform_device *pdev)
host->irq = irq;
host->imask = MMC_I_MASK_ALL;
- host->base = ioremap(r->start, SZ_4K);
- if (!host->base) {
- ret = -ENOMEM;
+ host->base = devm_ioremap_resource(&pdev->dev, r);
+ if (IS_ERR(host->base)) {
+ ret = PTR_ERR(host->base);
goto out;
}
@@ -742,7 +738,8 @@ static int pxamci_probe(struct platform_device *pdev)
writel(64, host->base + MMC_RESTO);
writel(host->imask, host->base + MMC_I_MASK);
- ret = request_irq(host->irq, pxamci_irq, 0, DRIVER_NAME, host);
+ ret = devm_request_irq(&pdev->dev, host->irq, pxamci_irq, 0,
+ DRIVER_NAME, host);
if (ret)
goto out;
@@ -833,14 +830,9 @@ out:
dma_release_channel(host->dma_chan_rx);
if (host->dma_chan_tx)
dma_release_channel(host->dma_chan_tx);
- if (host->base)
- iounmap(host->base);
- if (host->clk)
- clk_put(host->clk);
}
if (mmc)
mmc_free_host(mmc);
- release_resource(r);
return ret;
}
@@ -859,9 +851,6 @@ static int pxamci_remove(struct platform_device *pdev)
gpio_ro = host->pdata->gpio_card_ro;
gpio_power = host->pdata->gpio_power;
}
- if (host->vcc)
- regulator_put(host->vcc);
-
if (host->pdata && host->pdata->exit)
host->pdata->exit(&pdev->dev, mmc);
@@ -870,16 +859,10 @@ static int pxamci_remove(struct platform_device *pdev)
END_CMD_RES|PRG_DONE|DATA_TRAN_DONE,
host->base + MMC_I_MASK);
- free_irq(host->irq, host);
dmaengine_terminate_all(host->dma_chan_rx);
dmaengine_terminate_all(host->dma_chan_tx);
dma_release_channel(host->dma_chan_rx);
dma_release_channel(host->dma_chan_tx);
- iounmap(host->base);
-
- clk_put(host->clk);
-
- release_resource(host->res);
mmc_free_host(mmc);
}
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index 1f1582f6c..f25f29253 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -76,6 +76,7 @@
#define ESDHC_STD_TUNING_EN (1 << 24)
/* NOTE: the minimum valid tuning start tap for mx6sl is 1 */
#define ESDHC_TUNING_START_TAP 0x1
+#define ESDHC_TUNING_STEP_MASK 0x00070000
#define ESDHC_TUNING_STEP_SHIFT 16
/* pinctrl state */
@@ -489,9 +490,11 @@ static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg)
m |= ESDHC_MIX_CTRL_FBCLK_SEL;
tuning_ctrl = readl(host->ioaddr + ESDHC_TUNING_CTRL);
tuning_ctrl |= ESDHC_STD_TUNING_EN | ESDHC_TUNING_START_TAP;
- if (imx_data->boarddata.tuning_step)
+ if (imx_data->boarddata.tuning_step) {
+ tuning_ctrl &= ~ESDHC_TUNING_STEP_MASK;
tuning_ctrl |= imx_data->boarddata.tuning_step << ESDHC_TUNING_STEP_SHIFT;
- writel(tuning_ctrl, host->ioaddr + ESDHC_TUNING_CTRL);
+ }
+ writel(tuning_ctrl, host->ioaddr + ESDHC_TUNING_CTRL);
} else {
v &= ~ESDHC_MIX_CTRL_EXE_TUNE;
}
diff --git a/drivers/mmc/host/sdhci-of-at91.c b/drivers/mmc/host/sdhci-of-at91.c
index 06d0b50df..9cb86fb25 100644
--- a/drivers/mmc/host/sdhci-of-at91.c
+++ b/drivers/mmc/host/sdhci-of-at91.c
@@ -21,6 +21,8 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
+#include <linux/pm.h>
+#include <linux/pm_runtime.h>
#include "sdhci-pltfm.h"
@@ -51,6 +53,60 @@ static const struct of_device_id sdhci_at91_dt_match[] = {
{}
};
+#ifdef CONFIG_PM
+static int sdhci_at91_runtime_suspend(struct device *dev)
+{
+ struct sdhci_host *host = dev_get_drvdata(dev);
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_at91_priv *priv = pltfm_host->priv;
+ int ret;
+
+ ret = sdhci_runtime_suspend_host(host);
+
+ clk_disable_unprepare(priv->gck);
+ clk_disable_unprepare(priv->hclock);
+ clk_disable_unprepare(priv->mainck);
+
+ return ret;
+}
+
+static int sdhci_at91_runtime_resume(struct device *dev)
+{
+ struct sdhci_host *host = dev_get_drvdata(dev);
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_at91_priv *priv = pltfm_host->priv;
+ int ret;
+
+ ret = clk_prepare_enable(priv->mainck);
+ if (ret) {
+ dev_err(dev, "can't enable mainck\n");
+ return ret;
+ }
+
+ ret = clk_prepare_enable(priv->hclock);
+ if (ret) {
+ dev_err(dev, "can't enable hclock\n");
+ return ret;
+ }
+
+ ret = clk_prepare_enable(priv->gck);
+ if (ret) {
+ dev_err(dev, "can't enable gck\n");
+ return ret;
+ }
+
+ return sdhci_runtime_resume_host(host);
+}
+#endif /* CONFIG_PM */
+
+static const struct dev_pm_ops sdhci_at91_dev_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+ pm_runtime_force_resume)
+ SET_RUNTIME_PM_OPS(sdhci_at91_runtime_suspend,
+ sdhci_at91_runtime_resume,
+ NULL)
+};
+
static int sdhci_at91_probe(struct platform_device *pdev)
{
const struct of_device_id *match;
@@ -144,12 +200,24 @@ static int sdhci_at91_probe(struct platform_device *pdev)
sdhci_get_of_property(pdev);
+ pm_runtime_get_noresume(&pdev->dev);
+ pm_runtime_set_active(&pdev->dev);
+ pm_runtime_enable(&pdev->dev);
+ pm_runtime_set_autosuspend_delay(&pdev->dev, 50);
+ pm_runtime_use_autosuspend(&pdev->dev);
+
ret = sdhci_add_host(host);
if (ret)
- goto clocks_disable_unprepare;
+ goto pm_runtime_disable;
+
+ pm_runtime_put_autosuspend(&pdev->dev);
return 0;
+pm_runtime_disable:
+ pm_runtime_disable(&pdev->dev);
+ pm_runtime_set_suspended(&pdev->dev);
+ pm_runtime_put_noidle(&pdev->dev);
clocks_disable_unprepare:
clk_disable_unprepare(priv->gck);
clk_disable_unprepare(priv->mainck);
@@ -165,6 +233,10 @@ static int sdhci_at91_remove(struct platform_device *pdev)
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_at91_priv *priv = pltfm_host->priv;
+ pm_runtime_get_sync(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+ pm_runtime_put_noidle(&pdev->dev);
+
sdhci_pltfm_unregister(pdev);
clk_disable_unprepare(priv->gck);
@@ -178,7 +250,7 @@ static struct platform_driver sdhci_at91_driver = {
.driver = {
.name = "sdhci-at91",
.of_match_table = sdhci_at91_dt_match,
- .pm = SDHCI_PLTFM_PMOPS,
+ .pm = &sdhci_at91_dev_pm_ops,
},
.probe = sdhci_at91_probe,
.remove = sdhci_at91_remove,
diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c
index 90e94a028..83b122647 100644
--- a/drivers/mmc/host/sdhci-of-esdhc.c
+++ b/drivers/mmc/host/sdhci-of-esdhc.c
@@ -584,6 +584,8 @@ static int sdhci_esdhc_probe(struct platform_device *pdev)
{
struct sdhci_host *host;
struct device_node *np;
+ struct sdhci_pltfm_host *pltfm_host;
+ struct sdhci_esdhc *esdhc;
int ret;
np = pdev->dev.of_node;
@@ -600,6 +602,14 @@ static int sdhci_esdhc_probe(struct platform_device *pdev)
sdhci_get_of_property(pdev);
+ pltfm_host = sdhci_priv(host);
+ esdhc = pltfm_host->priv;
+ if (esdhc->vendor_ver == VENDOR_V_22)
+ host->quirks2 |= SDHCI_QUIRK2_HOST_NO_CMD23;
+
+ if (esdhc->vendor_ver > VENDOR_V_22)
+ host->quirks &= ~SDHCI_QUIRK_NO_BUSY_IRQ;
+
if (of_device_is_compatible(np, "fsl,p5040-esdhc") ||
of_device_is_compatible(np, "fsl,p5020-esdhc") ||
of_device_is_compatible(np, "fsl,p4080-esdhc") ||
diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c
index 45ee07d3a..df3b8eced 100644
--- a/drivers/mmc/host/sdhci-pci-core.c
+++ b/drivers/mmc/host/sdhci-pci-core.c
@@ -1495,7 +1495,7 @@ static int sdhci_pci_resume(struct device *dev)
static int sdhci_pci_runtime_suspend(struct device *dev)
{
- struct pci_dev *pdev = container_of(dev, struct pci_dev, dev);
+ struct pci_dev *pdev = to_pci_dev(dev);
struct sdhci_pci_chip *chip;
struct sdhci_pci_slot *slot;
int i, ret;
@@ -1531,7 +1531,7 @@ err_pci_runtime_suspend:
static int sdhci_pci_runtime_resume(struct device *dev)
{
- struct pci_dev *pdev = container_of(dev, struct pci_dev, dev);
+ struct pci_dev *pdev = to_pci_dev(dev);
struct sdhci_pci_chip *chip;
struct sdhci_pci_slot *slot;
int i, ret;
diff --git a/drivers/mmc/host/sdhci-pltfm.c b/drivers/mmc/host/sdhci-pltfm.c
index 87fb5ea8e..072bb27a6 100644
--- a/drivers/mmc/host/sdhci-pltfm.c
+++ b/drivers/mmc/host/sdhci-pltfm.c
@@ -104,7 +104,8 @@ void sdhci_get_of_property(struct platform_device *pdev)
if (of_find_property(np, "keep-power-in-suspend", NULL))
host->mmc->pm_caps |= MMC_PM_KEEP_POWER;
- if (of_find_property(np, "enable-sdio-wakeup", NULL))
+ if (of_property_read_bool(np, "wakeup-source") ||
+ of_property_read_bool(np, "enable-sdio-wakeup")) /* legacy */
host->mmc->pm_caps |= MMC_PM_WAKE_SDIO_IRQ;
}
#else
diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c
index ad28b49f0..83c4bf7bc 100644
--- a/drivers/mmc/host/sdhci-tegra.c
+++ b/drivers/mmc/host/sdhci-tegra.c
@@ -22,12 +22,20 @@
#include <linux/of_device.h>
#include <linux/mmc/card.h>
#include <linux/mmc/host.h>
+#include <linux/mmc/mmc.h>
#include <linux/mmc/slot-gpio.h>
#include <linux/gpio/consumer.h>
#include "sdhci-pltfm.h"
/* Tegra SDHOST controller vendor register definitions */
+#define SDHCI_TEGRA_VENDOR_CLOCK_CTRL 0x100
+#define SDHCI_CLOCK_CTRL_TAP_MASK 0x00ff0000
+#define SDHCI_CLOCK_CTRL_TAP_SHIFT 16
+#define SDHCI_CLOCK_CTRL_SDR50_TUNING_OVERRIDE BIT(5)
+#define SDHCI_CLOCK_CTRL_PADPIPE_CLKEN_OVERRIDE BIT(3)
+#define SDHCI_CLOCK_CTRL_SPI_MODE_CLKEN_OVERRIDE BIT(2)
+
#define SDHCI_TEGRA_VENDOR_MISC_CTRL 0x120
#define SDHCI_MISC_CTRL_ENABLE_SDR104 0x8
#define SDHCI_MISC_CTRL_ENABLE_SDR50 0x10
@@ -37,9 +45,9 @@
#define NVQUIRK_FORCE_SDHCI_SPEC_200 BIT(0)
#define NVQUIRK_ENABLE_BLOCK_GAP_DET BIT(1)
#define NVQUIRK_ENABLE_SDHCI_SPEC_300 BIT(2)
-#define NVQUIRK_DISABLE_SDR50 BIT(3)
-#define NVQUIRK_DISABLE_SDR104 BIT(4)
-#define NVQUIRK_DISABLE_DDR50 BIT(5)
+#define NVQUIRK_ENABLE_SDR50 BIT(3)
+#define NVQUIRK_ENABLE_SDR104 BIT(4)
+#define NVQUIRK_ENABLE_DDR50 BIT(5)
struct sdhci_tegra_soc_data {
const struct sdhci_pltfm_data *pdata;
@@ -49,6 +57,7 @@ struct sdhci_tegra_soc_data {
struct sdhci_tegra {
const struct sdhci_tegra_soc_data *soc_data;
struct gpio_desc *power_gpio;
+ bool ddr_signaling;
};
static u16 tegra_sdhci_readw(struct sdhci_host *host, int reg)
@@ -124,25 +133,33 @@ static void tegra_sdhci_reset(struct sdhci_host *host, u8 mask)
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_tegra *tegra_host = pltfm_host->priv;
const struct sdhci_tegra_soc_data *soc_data = tegra_host->soc_data;
- u32 misc_ctrl;
+ u32 misc_ctrl, clk_ctrl;
sdhci_reset(host, mask);
if (!(mask & SDHCI_RESET_ALL))
return;
- misc_ctrl = sdhci_readw(host, SDHCI_TEGRA_VENDOR_MISC_CTRL);
+ misc_ctrl = sdhci_readl(host, SDHCI_TEGRA_VENDOR_MISC_CTRL);
/* Erratum: Enable SDHCI spec v3.00 support */
if (soc_data->nvquirks & NVQUIRK_ENABLE_SDHCI_SPEC_300)
misc_ctrl |= SDHCI_MISC_CTRL_ENABLE_SDHCI_SPEC_300;
- /* Don't advertise UHS modes which aren't supported yet */
- if (soc_data->nvquirks & NVQUIRK_DISABLE_SDR50)
- misc_ctrl &= ~SDHCI_MISC_CTRL_ENABLE_SDR50;
- if (soc_data->nvquirks & NVQUIRK_DISABLE_DDR50)
- misc_ctrl &= ~SDHCI_MISC_CTRL_ENABLE_DDR50;
- if (soc_data->nvquirks & NVQUIRK_DISABLE_SDR104)
- misc_ctrl &= ~SDHCI_MISC_CTRL_ENABLE_SDR104;
- sdhci_writew(host, misc_ctrl, SDHCI_TEGRA_VENDOR_MISC_CTRL);
+ /* Advertise UHS modes as supported by host */
+ if (soc_data->nvquirks & NVQUIRK_ENABLE_SDR50)
+ misc_ctrl |= SDHCI_MISC_CTRL_ENABLE_SDR50;
+ if (soc_data->nvquirks & NVQUIRK_ENABLE_DDR50)
+ misc_ctrl |= SDHCI_MISC_CTRL_ENABLE_DDR50;
+ if (soc_data->nvquirks & NVQUIRK_ENABLE_SDR104)
+ misc_ctrl |= SDHCI_MISC_CTRL_ENABLE_SDR104;
+ sdhci_writel(host, misc_ctrl, SDHCI_TEGRA_VENDOR_MISC_CTRL);
+
+ clk_ctrl = sdhci_readl(host, SDHCI_TEGRA_VENDOR_CLOCK_CTRL);
+ clk_ctrl &= ~SDHCI_CLOCK_CTRL_SPI_MODE_CLKEN_OVERRIDE;
+ if (soc_data->nvquirks & SDHCI_MISC_CTRL_ENABLE_SDR50)
+ clk_ctrl |= SDHCI_CLOCK_CTRL_SDR50_TUNING_OVERRIDE;
+ sdhci_writel(host, clk_ctrl, SDHCI_TEGRA_VENDOR_CLOCK_CTRL);
+
+ tegra_host->ddr_signaling = false;
}
static void tegra_sdhci_set_bus_width(struct sdhci_host *host, int bus_width)
@@ -164,15 +181,99 @@ static void tegra_sdhci_set_bus_width(struct sdhci_host *host, int bus_width)
sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
}
+static void tegra_sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_tegra *tegra_host = pltfm_host->priv;
+ unsigned long host_clk;
+
+ if (!clock)
+ return;
+
+ host_clk = tegra_host->ddr_signaling ? clock * 2 : clock;
+ clk_set_rate(pltfm_host->clk, host_clk);
+ host->max_clk = clk_get_rate(pltfm_host->clk);
+
+ return sdhci_set_clock(host, clock);
+}
+
+static void tegra_sdhci_set_uhs_signaling(struct sdhci_host *host,
+ unsigned timing)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_tegra *tegra_host = pltfm_host->priv;
+
+ if (timing == MMC_TIMING_UHS_DDR50)
+ tegra_host->ddr_signaling = true;
+
+ return sdhci_set_uhs_signaling(host, timing);
+}
+
+static unsigned int tegra_sdhci_get_max_clock(struct sdhci_host *host)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+
+ /*
+ * DDR modes require the host to run at double the card frequency, so
+ * the maximum rate we can support is half of the module input clock.
+ */
+ return clk_round_rate(pltfm_host->clk, UINT_MAX) / 2;
+}
+
+static void tegra_sdhci_set_tap(struct sdhci_host *host, unsigned int tap)
+{
+ u32 reg;
+
+ reg = sdhci_readl(host, SDHCI_TEGRA_VENDOR_CLOCK_CTRL);
+ reg &= ~SDHCI_CLOCK_CTRL_TAP_MASK;
+ reg |= tap << SDHCI_CLOCK_CTRL_TAP_SHIFT;
+ sdhci_writel(host, reg, SDHCI_TEGRA_VENDOR_CLOCK_CTRL);
+}
+
+static int tegra_sdhci_execute_tuning(struct sdhci_host *host, u32 opcode)
+{
+ unsigned int min, max;
+
+ /*
+ * Start search for minimum tap value at 10, as smaller values are
+ * may wrongly be reported as working but fail at higher speeds,
+ * according to the TRM.
+ */
+ min = 10;
+ while (min < 255) {
+ tegra_sdhci_set_tap(host, min);
+ if (!mmc_send_tuning(host->mmc, opcode, NULL))
+ break;
+ min++;
+ }
+
+ /* Find the maximum tap value that still passes. */
+ max = min + 1;
+ while (max < 255) {
+ tegra_sdhci_set_tap(host, max);
+ if (mmc_send_tuning(host->mmc, opcode, NULL)) {
+ max--;
+ break;
+ }
+ max++;
+ }
+
+ /* The TRM states the ideal tap value is at 75% in the passing range. */
+ tegra_sdhci_set_tap(host, min + ((max - min) * 3 / 4));
+
+ return mmc_send_tuning(host->mmc, opcode, NULL);
+}
+
static const struct sdhci_ops tegra_sdhci_ops = {
.get_ro = tegra_sdhci_get_ro,
.read_w = tegra_sdhci_readw,
.write_l = tegra_sdhci_writel,
- .set_clock = sdhci_set_clock,
+ .set_clock = tegra_sdhci_set_clock,
.set_bus_width = tegra_sdhci_set_bus_width,
.reset = tegra_sdhci_reset,
- .set_uhs_signaling = sdhci_set_uhs_signaling,
- .get_max_clock = sdhci_pltfm_clk_get_max_clock,
+ .platform_execute_tuning = tegra_sdhci_execute_tuning,
+ .set_uhs_signaling = tegra_sdhci_set_uhs_signaling,
+ .get_max_clock = tegra_sdhci_get_max_clock,
};
static const struct sdhci_pltfm_data sdhci_tegra20_pdata = {
@@ -184,7 +285,7 @@ static const struct sdhci_pltfm_data sdhci_tegra20_pdata = {
.ops = &tegra_sdhci_ops,
};
-static struct sdhci_tegra_soc_data soc_data_tegra20 = {
+static const struct sdhci_tegra_soc_data soc_data_tegra20 = {
.pdata = &sdhci_tegra20_pdata,
.nvquirks = NVQUIRK_FORCE_SDHCI_SPEC_200 |
NVQUIRK_ENABLE_BLOCK_GAP_DET,
@@ -197,14 +298,15 @@ static const struct sdhci_pltfm_data sdhci_tegra30_pdata = {
SDHCI_QUIRK_NO_HISPD_BIT |
SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC |
SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
+ .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
.ops = &tegra_sdhci_ops,
};
-static struct sdhci_tegra_soc_data soc_data_tegra30 = {
+static const struct sdhci_tegra_soc_data soc_data_tegra30 = {
.pdata = &sdhci_tegra30_pdata,
.nvquirks = NVQUIRK_ENABLE_SDHCI_SPEC_300 |
- NVQUIRK_DISABLE_SDR50 |
- NVQUIRK_DISABLE_SDR104,
+ NVQUIRK_ENABLE_SDR50 |
+ NVQUIRK_ENABLE_SDR104,
};
static const struct sdhci_ops tegra114_sdhci_ops = {
@@ -212,11 +314,12 @@ static const struct sdhci_ops tegra114_sdhci_ops = {
.read_w = tegra_sdhci_readw,
.write_w = tegra_sdhci_writew,
.write_l = tegra_sdhci_writel,
- .set_clock = sdhci_set_clock,
+ .set_clock = tegra_sdhci_set_clock,
.set_bus_width = tegra_sdhci_set_bus_width,
.reset = tegra_sdhci_reset,
- .set_uhs_signaling = sdhci_set_uhs_signaling,
- .get_max_clock = sdhci_pltfm_clk_get_max_clock,
+ .platform_execute_tuning = tegra_sdhci_execute_tuning,
+ .set_uhs_signaling = tegra_sdhci_set_uhs_signaling,
+ .get_max_clock = tegra_sdhci_get_max_clock,
};
static const struct sdhci_pltfm_data sdhci_tegra114_pdata = {
@@ -226,17 +329,34 @@ static const struct sdhci_pltfm_data sdhci_tegra114_pdata = {
SDHCI_QUIRK_NO_HISPD_BIT |
SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC |
SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
+ .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
.ops = &tegra114_sdhci_ops,
};
-static struct sdhci_tegra_soc_data soc_data_tegra114 = {
+static const struct sdhci_tegra_soc_data soc_data_tegra114 = {
.pdata = &sdhci_tegra114_pdata,
- .nvquirks = NVQUIRK_DISABLE_SDR50 |
- NVQUIRK_DISABLE_DDR50 |
- NVQUIRK_DISABLE_SDR104,
+ .nvquirks = NVQUIRK_ENABLE_SDR50 |
+ NVQUIRK_ENABLE_DDR50 |
+ NVQUIRK_ENABLE_SDR104,
+};
+
+static const struct sdhci_pltfm_data sdhci_tegra210_pdata = {
+ .quirks = SDHCI_QUIRK_BROKEN_TIMEOUT_VAL |
+ SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
+ SDHCI_QUIRK_SINGLE_POWER_WRITE |
+ SDHCI_QUIRK_NO_HISPD_BIT |
+ SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC |
+ SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
+ .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
+ .ops = &tegra114_sdhci_ops,
+};
+
+static const struct sdhci_tegra_soc_data soc_data_tegra210 = {
+ .pdata = &sdhci_tegra210_pdata,
};
static const struct of_device_id sdhci_tegra_dt_match[] = {
+ { .compatible = "nvidia,tegra210-sdhci", .data = &soc_data_tegra210 },
{ .compatible = "nvidia,tegra124-sdhci", .data = &soc_data_tegra114 },
{ .compatible = "nvidia,tegra114-sdhci", .data = &soc_data_tegra114 },
{ .compatible = "nvidia,tegra30-sdhci", .data = &soc_data_tegra30 },
@@ -271,6 +391,7 @@ static int sdhci_tegra_probe(struct platform_device *pdev)
rc = -ENOMEM;
goto err_alloc_tegra_host;
}
+ tegra_host->ddr_signaling = false;
tegra_host->soc_data = soc_data;
pltfm_host->priv = tegra_host;
@@ -278,6 +399,9 @@ static int sdhci_tegra_probe(struct platform_device *pdev)
if (rc)
goto err_parse_dt;
+ if (tegra_host->soc_data->nvquirks & NVQUIRK_ENABLE_DDR50)
+ host->mmc->caps |= MMC_CAP_1_8V_DDR;
+
tegra_host->power_gpio = devm_gpiod_get_optional(&pdev->dev, "power",
GPIOD_OUT_HIGH);
if (IS_ERR(tegra_host->power_gpio)) {
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 5bc49878f..add9fdfd1 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -492,7 +492,7 @@ static int sdhci_adma_table_pre(struct sdhci_host *host,
host->align_buffer, host->align_buffer_sz, direction);
if (dma_mapping_error(mmc_dev(host->mmc), host->align_addr))
goto fail;
- BUG_ON(host->align_addr & host->align_mask);
+ BUG_ON(host->align_addr & SDHCI_ADMA2_MASK);
host->sg_count = sdhci_pre_dma_transfer(host, data);
if (host->sg_count < 0)
@@ -514,8 +514,8 @@ static int sdhci_adma_table_pre(struct sdhci_host *host,
* the (up to three) bytes that screw up the
* alignment.
*/
- offset = (host->align_sz - (addr & host->align_mask)) &
- host->align_mask;
+ offset = (SDHCI_ADMA2_ALIGN - (addr & SDHCI_ADMA2_MASK)) &
+ SDHCI_ADMA2_MASK;
if (offset) {
if (data->flags & MMC_DATA_WRITE) {
buffer = sdhci_kmap_atomic(sg, &flags);
@@ -529,8 +529,8 @@ static int sdhci_adma_table_pre(struct sdhci_host *host,
BUG_ON(offset > 65536);
- align += host->align_sz;
- align_addr += host->align_sz;
+ align += SDHCI_ADMA2_ALIGN;
+ align_addr += SDHCI_ADMA2_ALIGN;
desc += host->desc_sz;
@@ -611,7 +611,7 @@ static void sdhci_adma_table_post(struct sdhci_host *host,
/* Do a quick scan of the SG list for any unaligned mappings */
has_unaligned = false;
for_each_sg(data->sg, sg, host->sg_count, i)
- if (sg_dma_address(sg) & host->align_mask) {
+ if (sg_dma_address(sg) & SDHCI_ADMA2_MASK) {
has_unaligned = true;
break;
}
@@ -623,15 +623,15 @@ static void sdhci_adma_table_post(struct sdhci_host *host,
align = host->align_buffer;
for_each_sg(data->sg, sg, host->sg_count, i) {
- if (sg_dma_address(sg) & host->align_mask) {
- size = host->align_sz -
- (sg_dma_address(sg) & host->align_mask);
+ if (sg_dma_address(sg) & SDHCI_ADMA2_MASK) {
+ size = SDHCI_ADMA2_ALIGN -
+ (sg_dma_address(sg) & SDHCI_ADMA2_MASK);
buffer = sdhci_kmap_atomic(sg, &flags);
memcpy(buffer, align, size);
sdhci_kunmap_atomic(buffer, &flags);
- align += host->align_sz;
+ align += SDHCI_ADMA2_ALIGN;
}
}
}
@@ -771,8 +771,7 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)
if (unlikely(broken)) {
for_each_sg(data->sg, sg, data->sg_len, i) {
if (sg->length & 0x3) {
- DBG("Reverting to PIO because of "
- "transfer size (%d)\n",
+ DBG("Reverting to PIO because of transfer size (%d)\n",
sg->length);
host->flags &= ~SDHCI_REQ_USE_DMA;
break;
@@ -806,8 +805,7 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)
if (unlikely(broken)) {
for_each_sg(data->sg, sg, data->sg_len, i) {
if (sg->offset & 0x3) {
- DBG("Reverting to PIO because of "
- "bad alignment\n");
+ DBG("Reverting to PIO because of bad alignment\n");
host->flags &= ~SDHCI_REQ_USE_DMA;
break;
}
@@ -1019,8 +1017,8 @@ void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
while (sdhci_readl(host, SDHCI_PRESENT_STATE) & mask) {
if (timeout == 0) {
- pr_err("%s: Controller never released "
- "inhibit bit(s).\n", mmc_hostname(host->mmc));
+ pr_err("%s: Controller never released inhibit bit(s).\n",
+ mmc_hostname(host->mmc));
sdhci_dumpregs(host);
cmd->error = -EIO;
tasklet_schedule(&host->finish_tasklet);
@@ -1257,8 +1255,8 @@ clock_set:
while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
& SDHCI_CLOCK_INT_STABLE)) {
if (timeout == 0) {
- pr_err("%s: Internal clock never "
- "stabilised.\n", mmc_hostname(host->mmc));
+ pr_err("%s: Internal clock never stabilised.\n",
+ mmc_hostname(host->mmc));
sdhci_dumpregs(host);
return;
}
@@ -1277,19 +1275,6 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned char mode,
struct mmc_host *mmc = host->mmc;
u8 pwr = 0;
- if (!IS_ERR(mmc->supply.vmmc)) {
- spin_unlock_irq(&host->lock);
- mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd);
- spin_lock_irq(&host->lock);
-
- if (mode != MMC_POWER_OFF)
- sdhci_writeb(host, SDHCI_POWER_ON, SDHCI_POWER_CONTROL);
- else
- sdhci_writeb(host, 0, SDHCI_POWER_CONTROL);
-
- return;
- }
-
if (mode != MMC_POWER_OFF) {
switch (1 << vdd) {
case MMC_VDD_165_195:
@@ -1304,7 +1289,9 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned char mode,
pwr = SDHCI_POWER_330;
break;
default:
- BUG();
+ WARN(1, "%s: Invalid vdd %#x\n",
+ mmc_hostname(host->mmc), vdd);
+ break;
}
}
@@ -1348,6 +1335,12 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned char mode,
if (host->quirks & SDHCI_QUIRK_DELAY_AFTER_POWER)
mdelay(10);
}
+
+ if (!IS_ERR(mmc->supply.vmmc)) {
+ spin_unlock_irq(&host->lock);
+ mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd);
+ spin_lock_irq(&host->lock);
+ }
}
/*****************************************************************************\
@@ -1543,8 +1536,8 @@ static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios)
else if (ios->drv_type == MMC_SET_DRIVER_TYPE_D)
ctrl_2 |= SDHCI_CTRL_DRV_TYPE_D;
else {
- pr_warn("%s: invalid driver type, default to "
- "driver type B\n", mmc_hostname(mmc));
+ pr_warn("%s: invalid driver type, default to driver type B\n",
+ mmc_hostname(mmc));
ctrl_2 |= SDHCI_CTRL_DRV_TYPE_B;
}
@@ -1898,9 +1891,9 @@ static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode)
tuning_count = host->tuning_count;
/*
- * The Host Controller needs tuning only in case of SDR104 mode
- * and for SDR50 mode when Use Tuning for SDR50 is set in the
- * Capabilities register.
+ * The Host Controller needs tuning in case of SDR104 and DDR50
+ * mode, and for SDR50 mode when Use Tuning for SDR50 is set in
+ * the Capabilities register.
* If the Host Controller supports the HS200 mode then the
* tuning function has to be executed.
*/
@@ -1920,6 +1913,7 @@ static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode)
break;
case MMC_TIMING_UHS_SDR104:
+ case MMC_TIMING_UHS_DDR50:
break;
case MMC_TIMING_UHS_SDR50:
@@ -2017,10 +2011,7 @@ static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode)
spin_lock_irqsave(&host->lock, flags);
if (!host->tuning_done) {
- pr_info(DRIVER_NAME ": Timeout waiting for "
- "Buffer Read Ready interrupt during tuning "
- "procedure, falling back to fixed sampling "
- "clock\n");
+ pr_info(DRIVER_NAME ": Timeout waiting for Buffer Read Ready interrupt during tuning procedure, falling back to fixed sampling clock\n");
ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
ctrl &= ~SDHCI_CTRL_TUNED_CLK;
ctrl &= ~SDHCI_CTRL_EXEC_TUNING;
@@ -2048,9 +2039,7 @@ static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode)
sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
}
if (!(ctrl & SDHCI_CTRL_TUNED_CLK)) {
- pr_info(DRIVER_NAME ": Tuning procedure"
- " failed, falling back to fixed sampling"
- " clock\n");
+ pr_info(DRIVER_NAME ": Tuning procedure failed, falling back to fixed sampling clock\n");
err = -EIO;
}
@@ -2295,8 +2284,8 @@ static void sdhci_timeout_timer(unsigned long data)
spin_lock_irqsave(&host->lock, flags);
if (host->mrq) {
- pr_err("%s: Timeout waiting for hardware "
- "interrupt.\n", mmc_hostname(host->mmc));
+ pr_err("%s: Timeout waiting for hardware interrupt.\n",
+ mmc_hostname(host->mmc));
sdhci_dumpregs(host);
if (host->data) {
@@ -2327,9 +2316,8 @@ static void sdhci_cmd_irq(struct sdhci_host *host, u32 intmask, u32 *mask)
BUG_ON(intmask == 0);
if (!host->cmd) {
- pr_err("%s: Got command interrupt 0x%08x even "
- "though no command operation was in progress.\n",
- mmc_hostname(host->mmc), (unsigned)intmask);
+ pr_err("%s: Got command interrupt 0x%08x even though no command operation was in progress.\n",
+ mmc_hostname(host->mmc), (unsigned)intmask);
sdhci_dumpregs(host);
return;
}
@@ -2358,8 +2346,7 @@ static void sdhci_cmd_irq(struct sdhci_host *host, u32 intmask, u32 *mask)
*/
if (host->cmd->flags & MMC_RSP_BUSY) {
if (host->cmd->data)
- DBG("Cannot wait for busy signal when also "
- "doing a data transfer");
+ DBG("Cannot wait for busy signal when also doing a data transfer");
else if (!(host->quirks & SDHCI_QUIRK_NO_BUSY_IRQ)
&& !host->busy_handle) {
/* Mark that command complete before busy is ended */
@@ -2453,9 +2440,8 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
}
}
- pr_err("%s: Got data interrupt 0x%08x even "
- "though no data operation was in progress.\n",
- mmc_hostname(host->mmc), (unsigned)intmask);
+ pr_err("%s: Got data interrupt 0x%08x even though no data operation was in progress.\n",
+ mmc_hostname(host->mmc), (unsigned)intmask);
sdhci_dumpregs(host);
return;
@@ -2900,9 +2886,8 @@ int sdhci_add_host(struct sdhci_host *host)
host->version = (host->version & SDHCI_SPEC_VER_MASK)
>> SDHCI_SPEC_VER_SHIFT;
if (host->version > SDHCI_SPEC_300) {
- pr_err("%s: Unknown controller version (%d). "
- "You may experience problems.\n", mmc_hostname(mmc),
- host->version);
+ pr_err("%s: Unknown controller version (%d). You may experience problems.\n",
+ mmc_hostname(mmc), host->version);
}
caps[0] = (host->quirks & SDHCI_QUIRK_MISSING_CAPS) ? host->caps :
@@ -2971,24 +2956,17 @@ int sdhci_add_host(struct sdhci_host *host)
if (host->flags & SDHCI_USE_64_BIT_DMA) {
host->adma_table_sz = (SDHCI_MAX_SEGS * 2 + 1) *
SDHCI_ADMA2_64_DESC_SZ;
- host->align_buffer_sz = SDHCI_MAX_SEGS *
- SDHCI_ADMA2_64_ALIGN;
host->desc_sz = SDHCI_ADMA2_64_DESC_SZ;
- host->align_sz = SDHCI_ADMA2_64_ALIGN;
- host->align_mask = SDHCI_ADMA2_64_ALIGN - 1;
} else {
host->adma_table_sz = (SDHCI_MAX_SEGS * 2 + 1) *
SDHCI_ADMA2_32_DESC_SZ;
- host->align_buffer_sz = SDHCI_MAX_SEGS *
- SDHCI_ADMA2_32_ALIGN;
host->desc_sz = SDHCI_ADMA2_32_DESC_SZ;
- host->align_sz = SDHCI_ADMA2_32_ALIGN;
- host->align_mask = SDHCI_ADMA2_32_ALIGN - 1;
}
host->adma_table = dma_alloc_coherent(mmc_dev(mmc),
host->adma_table_sz,
&host->adma_addr,
GFP_KERNEL);
+ host->align_buffer_sz = SDHCI_MAX_SEGS * SDHCI_ADMA2_ALIGN;
host->align_buffer = kmalloc(host->align_buffer_sz, GFP_KERNEL);
if (!host->adma_table || !host->align_buffer) {
if (host->adma_table)
@@ -3002,7 +2980,7 @@ int sdhci_add_host(struct sdhci_host *host)
host->flags &= ~SDHCI_USE_ADMA;
host->adma_table = NULL;
host->align_buffer = NULL;
- } else if (host->adma_addr & host->align_mask) {
+ } else if (host->adma_addr & (SDHCI_ADMA2_DESC_ALIGN - 1)) {
pr_warn("%s: unable to allocate aligned ADMA descriptor\n",
mmc_hostname(mmc));
host->flags &= ~SDHCI_USE_ADMA;
@@ -3035,8 +3013,8 @@ int sdhci_add_host(struct sdhci_host *host)
if (host->max_clk == 0 || host->quirks &
SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN) {
if (!host->ops->get_max_clock) {
- pr_err("%s: Hardware doesn't specify base clock "
- "frequency.\n", mmc_hostname(mmc));
+ pr_err("%s: Hardware doesn't specify base clock frequency.\n",
+ mmc_hostname(mmc));
return -ENODEV;
}
host->max_clk = host->ops->get_max_clock(host);
@@ -3297,8 +3275,8 @@ int sdhci_add_host(struct sdhci_host *host)
mmc->ocr_avail_mmc &= host->ocr_avail_mmc;
if (mmc->ocr_avail == 0) {
- pr_err("%s: Hardware doesn't report any "
- "support voltages.\n", mmc_hostname(mmc));
+ pr_err("%s: Hardware doesn't report any support voltages.\n",
+ mmc_hostname(mmc));
return -ENODEV;
}
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 9c331ac5a..0115e9907 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -272,22 +272,27 @@
/* ADMA2 32-bit DMA descriptor size */
#define SDHCI_ADMA2_32_DESC_SZ 8
-/* ADMA2 32-bit DMA alignment */
-#define SDHCI_ADMA2_32_ALIGN 4
-
/* ADMA2 32-bit descriptor */
struct sdhci_adma2_32_desc {
__le16 cmd;
__le16 len;
__le32 addr;
-} __packed __aligned(SDHCI_ADMA2_32_ALIGN);
+} __packed __aligned(4);
+
+/* ADMA2 data alignment */
+#define SDHCI_ADMA2_ALIGN 4
+#define SDHCI_ADMA2_MASK (SDHCI_ADMA2_ALIGN - 1)
+
+/*
+ * ADMA2 descriptor alignment. Some controllers (e.g. Intel) require 8 byte
+ * alignment for the descriptor table even in 32-bit DMA mode. Memory
+ * allocation is at least 8 byte aligned anyway, so just stipulate 8 always.
+ */
+#define SDHCI_ADMA2_DESC_ALIGN 8
/* ADMA2 64-bit DMA descriptor size */
#define SDHCI_ADMA2_64_DESC_SZ 12
-/* ADMA2 64-bit DMA alignment */
-#define SDHCI_ADMA2_64_ALIGN 8
-
/*
* ADMA2 64-bit descriptor. Note 12-byte descriptor can't always be 8-byte
* aligned.
@@ -483,8 +488,6 @@ struct sdhci_host {
dma_addr_t align_addr; /* Mapped bounce buffer */
unsigned int desc_sz; /* ADMA descriptor size */
- unsigned int align_sz; /* ADMA alignment */
- unsigned int align_mask; /* ADMA alignment mask */
struct tasklet_struct finish_tasklet; /* Tasklet structures */
diff --git a/drivers/mmc/host/sh_mmcif.c b/drivers/mmc/host/sh_mmcif.c
index ad9ffea7d..6234eab38 100644
--- a/drivers/mmc/host/sh_mmcif.c
+++ b/drivers/mmc/host/sh_mmcif.c
@@ -397,38 +397,26 @@ static void sh_mmcif_start_dma_tx(struct sh_mmcif_host *host)
}
static struct dma_chan *
-sh_mmcif_request_dma_one(struct sh_mmcif_host *host,
- struct sh_mmcif_plat_data *pdata,
- enum dma_transfer_direction direction)
+sh_mmcif_request_dma_pdata(struct sh_mmcif_host *host, uintptr_t slave_id)
{
- struct dma_slave_config cfg = { 0, };
- struct dma_chan *chan;
- void *slave_data = NULL;
- struct resource *res;
- struct device *dev = sh_mmcif_host_to_dev(host);
dma_cap_mask_t mask;
- int ret;
dma_cap_zero(mask);
dma_cap_set(DMA_SLAVE, mask);
+ if (slave_id <= 0)
+ return NULL;
- if (pdata)
- slave_data = direction == DMA_MEM_TO_DEV ?
- (void *)pdata->slave_id_tx :
- (void *)pdata->slave_id_rx;
-
- chan = dma_request_slave_channel_compat(mask, shdma_chan_filter,
- slave_data, dev,
- direction == DMA_MEM_TO_DEV ? "tx" : "rx");
-
- dev_dbg(dev, "%s: %s: got channel %p\n", __func__,
- direction == DMA_MEM_TO_DEV ? "TX" : "RX", chan);
+ return dma_request_channel(mask, shdma_chan_filter, (void *)slave_id);
+}
- if (!chan)
- return NULL;
+static int sh_mmcif_dma_slave_config(struct sh_mmcif_host *host,
+ struct dma_chan *chan,
+ enum dma_transfer_direction direction)
+{
+ struct resource *res;
+ struct dma_slave_config cfg = { 0, };
res = platform_get_resource(host->pd, IORESOURCE_MEM, 0);
-
cfg.direction = direction;
if (direction == DMA_DEV_TO_MEM) {
@@ -439,38 +427,42 @@ sh_mmcif_request_dma_one(struct sh_mmcif_host *host,
cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
}
- ret = dmaengine_slave_config(chan, &cfg);
- if (ret < 0) {
- dma_release_channel(chan);
- return NULL;
- }
-
- return chan;
+ return dmaengine_slave_config(chan, &cfg);
}
-static void sh_mmcif_request_dma(struct sh_mmcif_host *host,
- struct sh_mmcif_plat_data *pdata)
+static void sh_mmcif_request_dma(struct sh_mmcif_host *host)
{
struct device *dev = sh_mmcif_host_to_dev(host);
host->dma_active = false;
- if (pdata) {
- if (pdata->slave_id_tx <= 0 || pdata->slave_id_rx <= 0)
- return;
- } else if (!dev->of_node) {
- return;
+ /* We can only either use DMA for both Tx and Rx or not use it at all */
+ if (IS_ENABLED(CONFIG_SUPERH) && dev->platform_data) {
+ struct sh_mmcif_plat_data *pdata = dev->platform_data;
+
+ host->chan_tx = sh_mmcif_request_dma_pdata(host,
+ pdata->slave_id_tx);
+ host->chan_rx = sh_mmcif_request_dma_pdata(host,
+ pdata->slave_id_rx);
+ } else {
+ host->chan_tx = dma_request_slave_channel(dev, "tx");
+ host->chan_rx = dma_request_slave_channel(dev, "rx");
}
+ dev_dbg(dev, "%s: got channel TX %p RX %p\n", __func__, host->chan_tx,
+ host->chan_rx);
- /* We can only either use DMA for both Tx and Rx or not use it at all */
- host->chan_tx = sh_mmcif_request_dma_one(host, pdata, DMA_MEM_TO_DEV);
- if (!host->chan_tx)
- return;
+ if (!host->chan_tx || !host->chan_rx ||
+ sh_mmcif_dma_slave_config(host, host->chan_tx, DMA_MEM_TO_DEV) ||
+ sh_mmcif_dma_slave_config(host, host->chan_rx, DMA_DEV_TO_MEM))
+ goto error;
- host->chan_rx = sh_mmcif_request_dma_one(host, pdata, DMA_DEV_TO_MEM);
- if (!host->chan_rx) {
+ return;
+
+error:
+ if (host->chan_tx)
dma_release_channel(host->chan_tx);
- host->chan_tx = NULL;
- }
+ if (host->chan_rx)
+ dma_release_channel(host->chan_rx);
+ host->chan_tx = host->chan_rx = NULL;
}
static void sh_mmcif_release_dma(struct sh_mmcif_host *host)
@@ -1102,7 +1094,7 @@ static void sh_mmcif_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
if (ios->power_mode == MMC_POWER_UP) {
if (!host->card_present) {
/* See if we also get DMA */
- sh_mmcif_request_dma(host, dev->platform_data);
+ sh_mmcif_request_dma(host);
host->card_present = true;
}
sh_mmcif_set_power(host, ios);
diff --git a/drivers/mmc/host/tmio_mmc_dma.c b/drivers/mmc/host/tmio_mmc_dma.c
index e4b05dbb9..4a0d6b80e 100644
--- a/drivers/mmc/host/tmio_mmc_dma.c
+++ b/drivers/mmc/host/tmio_mmc_dma.c
@@ -94,9 +94,9 @@ static void tmio_mmc_start_dma_rx(struct tmio_mmc_host *host)
desc = NULL;
ret = cookie;
}
+ dev_dbg(&host->pdev->dev, "%s(): mapped %d -> %d, cookie %d, rq %p\n",
+ __func__, host->sg_len, ret, cookie, host->mrq);
}
- dev_dbg(&host->pdev->dev, "%s(): mapped %d -> %d, cookie %d, rq %p\n",
- __func__, host->sg_len, ret, cookie, host->mrq);
pio:
if (!desc) {
@@ -116,8 +116,8 @@ pio:
"DMA failed: %d, falling back to PIO\n", ret);
}
- dev_dbg(&host->pdev->dev, "%s(): desc %p, cookie %d, sg[%d]\n", __func__,
- desc, cookie, host->sg_len);
+ dev_dbg(&host->pdev->dev, "%s(): desc %p, sg[%d]\n", __func__,
+ desc, host->sg_len);
}
static void tmio_mmc_start_dma_tx(struct tmio_mmc_host *host)
@@ -174,9 +174,9 @@ static void tmio_mmc_start_dma_tx(struct tmio_mmc_host *host)
desc = NULL;
ret = cookie;
}
+ dev_dbg(&host->pdev->dev, "%s(): mapped %d -> %d, cookie %d, rq %p\n",
+ __func__, host->sg_len, ret, cookie, host->mrq);
}
- dev_dbg(&host->pdev->dev, "%s(): mapped %d -> %d, cookie %d, rq %p\n",
- __func__, host->sg_len, ret, cookie, host->mrq);
pio:
if (!desc) {
@@ -196,8 +196,7 @@ pio:
"DMA failed: %d, falling back to PIO\n", ret);
}
- dev_dbg(&host->pdev->dev, "%s(): desc %p, cookie %d\n", __func__,
- desc, cookie);
+ dev_dbg(&host->pdev->dev, "%s(): desc %p\n", __func__, desc);
}
void tmio_mmc_start_dma(struct tmio_mmc_host *host,