Linux-libre 4.8.2-gnupck-4.8.2-gnu

3 files changed, 28 insertions, 29 deletions

diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig
index f73c41697..58329d2da 100644
--- a/drivers/mtd/devices/Kconfig
+++ b/drivers/mtd/devices/Kconfig
@@ -113,12 +113,12 @@ config MTD_SST25L
 	  if you want to specify device partitioning.
 
 config MTD_BCM47XXSFLASH
-	tristate "R/O support for serial flash on BCMA bus"
-	depends on BCMA_SFLASH
+	tristate "Support for serial flash on BCMA bus"
+	depends on BCMA_SFLASH && (MIPS || ARM)
 	help
 	  BCMA bus can have various flash memories attached, they are
 	  registered by bcma as platform devices. This enables driver for
-	  serial flash memories (only read-only mode is implemented).
+	  serial flash memories.
 
 config MTD_SLRAM
 	tristate "Uncached system RAM"
@@ -171,18 +171,6 @@ config MTDRAM_ERASE_SIZE
 	  as a module, it is also possible to specify this as a parameter when
 	  loading the module.
 
-#If not a module (I don't want to test it as a module)
-config MTDRAM_ABS_POS
-	hex "SRAM Hexadecimal Absolute position or 0"
-	depends on MTD_MTDRAM=y
-	default "0"
-	help
-	  If you have system RAM accessible by the CPU but not used by Linux
-	  in normal operation, you can give the physical address at which the
-	  available RAM starts, and the MTDRAM driver will use it instead of
-	  allocating space from Linux's available memory. Otherwise, leave
-	  this set to zero. Most people will want to leave this as zero.
-
 config MTD_BLOCK2MTD
 	tristate "MTD using block device"
 	depends on BLOCK
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index 9d6854467..9cf7fcd28 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -73,14 +73,15 @@ static int m25p80_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len)
 	return spi_write(spi, flash->command, len + 1);
 }
 
-static void m25p80_write(struct spi_nor *nor, loff_t to, size_t len,
-			size_t *retlen, const u_char *buf)
+static ssize_t m25p80_write(struct spi_nor *nor, loff_t to, size_t len,
+			    const u_char *buf)
 {
 	struct m25p *flash = nor->priv;
 	struct spi_device *spi = flash->spi;
 	struct spi_transfer t[2] = {};
 	struct spi_message m;
 	int cmd_sz = m25p_cmdsz(nor);
+	ssize_t ret;
 
 	spi_message_init(&m);
 
@@ -98,9 +99,14 @@ static void m25p80_write(struct spi_nor *nor, loff_t to, size_t len,
 	t[1].len = len;
 	spi_message_add_tail(&t[1], &m);
 
-	spi_sync(spi, &m);
+	ret = spi_sync(spi, &m);
+	if (ret)
+		return ret;
 
-	*retlen += m.actual_length - cmd_sz;
+	ret = m.actual_length - cmd_sz;
+	if (ret < 0)
+		return -EIO;
+	return ret;
 }
 
 static inline unsigned int m25p80_rx_nbits(struct spi_nor *nor)
@@ -119,21 +125,21 @@ static inline unsigned int m25p80_rx_nbits(struct spi_nor *nor)
  * Read an address range from the nor chip.  The address range
  * may be any size provided it is within the physical boundaries.
  */
-static int m25p80_read(struct spi_nor *nor, loff_t from, size_t len,
-			size_t *retlen, u_char *buf)
+static ssize_t m25p80_read(struct spi_nor *nor, loff_t from, size_t len,
+			   u_char *buf)
 {
 	struct m25p *flash = nor->priv;
 	struct spi_device *spi = flash->spi;
 	struct spi_transfer t[2];
 	struct spi_message m;
 	unsigned int dummy = nor->read_dummy;
+	ssize_t ret;
 
 	/* convert the dummy cycles to the number of bytes */
 	dummy /= 8;
 
 	if (spi_flash_read_supported(spi)) {
 		struct spi_flash_read_message msg;
-		int ret;
 
 		memset(&msg, 0, sizeof(msg));
 
@@ -149,8 +155,9 @@ static int m25p80_read(struct spi_nor *nor, loff_t from, size_t len,
 		msg.data_nbits = m25p80_rx_nbits(nor);
 
 		ret = spi_flash_read(spi, &msg);
-		*retlen = msg.retlen;
-		return ret;
+		if (ret < 0)
+			return ret;
+		return msg.retlen;
 	}
 
 	spi_message_init(&m);
@@ -165,13 +172,17 @@ static int m25p80_read(struct spi_nor *nor, loff_t from, size_t len,
 
 	t[1].rx_buf = buf;
 	t[1].rx_nbits = m25p80_rx_nbits(nor);
-	t[1].len = len;
+	t[1].len = min(len, spi_max_transfer_size(spi));
 	spi_message_add_tail(&t[1], &m);
 
-	spi_sync(spi, &m);
+	ret = spi_sync(spi, &m);
+	if (ret)
+		return ret;
 
-	*retlen = m.actual_length - m25p_cmdsz(nor) - dummy;
-	return 0;
+	ret = m.actual_length - m25p_cmdsz(nor) - dummy;
+	if (ret < 0)
+		return -EIO;
+	return ret;
 }
 
 /*
diff --git a/drivers/mtd/devices/powernv_flash.c b/drivers/mtd/devices/powernv_flash.c
index d5b870b3f..f5396f26d 100644
--- a/drivers/mtd/devices/powernv_flash.c
+++ b/drivers/mtd/devices/powernv_flash.c
@@ -95,7 +95,7 @@ static int powernv_flash_async_op(struct mtd_info *mtd, enum flash_op op,
 		return -EIO;
 	}
 
-	rc = be64_to_cpu(msg.params[1]);
+	rc = opal_get_async_rc(msg);
 	if (rc == OPAL_SUCCESS) {
 		rc = 0;
 		if (retlen)