Linux-libre 4.7.1-gnupck-4.7.1-gnu

1 files changed, 129 insertions, 32 deletions

diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
index 8122c699c..6e461560c 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -25,7 +25,6 @@
 #include <linux/mtd/partitions.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
-#include <linux/of_mtd.h>
 #include "gpmi-nand.h"
 #include "bch-regs.h"
 
@@ -47,10 +46,44 @@ static struct nand_bbt_descr gpmi_bbt_descr = {
  * We may change the layout if we can get the ECC info from the datasheet,
  * else we will use all the (page + OOB).
  */
-static struct nand_ecclayout gpmi_hw_ecclayout = {
-	.eccbytes = 0,
-	.eccpos = { 0, },
-	.oobfree = { {.offset = 0, .length = 0} }
+static int gpmi_ooblayout_ecc(struct mtd_info *mtd, int section,
+			      struct mtd_oob_region *oobregion)
+{
+	struct nand_chip *chip = mtd_to_nand(mtd);
+	struct gpmi_nand_data *this = nand_get_controller_data(chip);
+	struct bch_geometry *geo = &this->bch_geometry;
+
+	if (section)
+		return -ERANGE;
+
+	oobregion->offset = 0;
+	oobregion->length = geo->page_size - mtd->writesize;
+
+	return 0;
+}
+
+static int gpmi_ooblayout_free(struct mtd_info *mtd, int section,
+			       struct mtd_oob_region *oobregion)
+{
+	struct nand_chip *chip = mtd_to_nand(mtd);
+	struct gpmi_nand_data *this = nand_get_controller_data(chip);
+	struct bch_geometry *geo = &this->bch_geometry;
+
+	if (section)
+		return -ERANGE;
+
+	/* The available oob size we have. */
+	if (geo->page_size < mtd->writesize + mtd->oobsize) {
+		oobregion->offset = geo->page_size - mtd->writesize;
+		oobregion->length = mtd->oobsize - oobregion->offset;
+	}
+
+	return 0;
+}
+
+static const struct mtd_ooblayout_ops gpmi_ooblayout_ops = {
+	.ecc = gpmi_ooblayout_ecc,
+	.free = gpmi_ooblayout_free,
 };
 
 static const struct gpmi_devdata gpmi_devdata_imx23 = {
@@ -141,7 +174,6 @@ static int set_geometry_by_ecc_info(struct gpmi_nand_data *this)
 	struct bch_geometry *geo = &this->bch_geometry;
 	struct nand_chip *chip = &this->nand;
 	struct mtd_info *mtd = nand_to_mtd(chip);
-	struct nand_oobfree *of = gpmi_hw_ecclayout.oobfree;
 	unsigned int block_mark_bit_offset;
 
 	if (!(chip->ecc_strength_ds > 0 && chip->ecc_step_ds > 0))
@@ -229,12 +261,6 @@ static int set_geometry_by_ecc_info(struct gpmi_nand_data *this)
 	geo->page_size = mtd->writesize + geo->metadata_size +
 		(geo->gf_len * geo->ecc_strength * geo->ecc_chunk_count) / 8;
 
-	/* The available oob size we have. */
-	if (geo->page_size < mtd->writesize + mtd->oobsize) {
-		of->offset = geo->page_size - mtd->writesize;
-		of->length = mtd->oobsize - of->offset;
-	}
-
 	geo->payload_size = mtd->writesize;
 
 	geo->auxiliary_status_offset = ALIGN(geo->metadata_size, 4);
@@ -797,6 +823,7 @@ static void gpmi_free_dma_buffer(struct gpmi_nand_data *this)
 
 	this->cmd_buffer	= NULL;
 	this->data_buffer_dma	= NULL;
+	this->raw_buffer	= NULL;
 	this->page_buffer_virt	= NULL;
 	this->page_buffer_size	=  0;
 }
@@ -1037,14 +1064,87 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
 	/* Loop over status bytes, accumulating ECC status. */
 	status = auxiliary_virt + nfc_geo->auxiliary_status_offset;
 
+	read_page_swap_end(this, buf, nfc_geo->payload_size,
+			   this->payload_virt, this->payload_phys,
+			   nfc_geo->payload_size,
+			   payload_virt, payload_phys);
+
 	for (i = 0; i < nfc_geo->ecc_chunk_count; i++, status++) {
 		if ((*status == STATUS_GOOD) || (*status == STATUS_ERASED))
 			continue;
 
 		if (*status == STATUS_UNCORRECTABLE) {
+			int eccbits = nfc_geo->ecc_strength * nfc_geo->gf_len;
+			u8 *eccbuf = this->raw_buffer;
+			int offset, bitoffset;
+			int eccbytes;
+			int flips;
+
+			/* Read ECC bytes into our internal raw_buffer */
+			offset = nfc_geo->metadata_size * 8;
+			offset += ((8 * nfc_geo->ecc_chunk_size) + eccbits) * (i + 1);
+			offset -= eccbits;
+			bitoffset = offset % 8;
+			eccbytes = DIV_ROUND_UP(offset + eccbits, 8);
+			offset /= 8;
+			eccbytes -= offset;
+			chip->cmdfunc(mtd, NAND_CMD_RNDOUT, offset, -1);
+			chip->read_buf(mtd, eccbuf, eccbytes);
+
+			/*
+			 * ECC data are not byte aligned and we may have
+			 * in-band data in the first and last byte of
+			 * eccbuf. Set non-eccbits to one so that
+			 * nand_check_erased_ecc_chunk() does not count them
+			 * as bitflips.
+			 */
+			if (bitoffset)
+				eccbuf[0] |= GENMASK(bitoffset - 1, 0);
+
+			bitoffset = (bitoffset + eccbits) % 8;
+			if (bitoffset)
+				eccbuf[eccbytes - 1] |= GENMASK(7, bitoffset);
+
+			/*
+			 * The ECC hardware has an uncorrectable ECC status
+			 * code in case we have bitflips in an erased page. As
+			 * nothing was written into this subpage the ECC is
+			 * obviously wrong and we can not trust it. We assume
+			 * at this point that we are reading an erased page and
+			 * try to correct the bitflips in buffer up to
+			 * ecc_strength bitflips. If this is a page with random
+			 * data, we exceed this number of bitflips and have a
+			 * ECC failure. Otherwise we use the corrected buffer.
+			 */
+			if (i == 0) {
+				/* The first block includes metadata */
+				flips = nand_check_erased_ecc_chunk(
+						buf + i * nfc_geo->ecc_chunk_size,
+						nfc_geo->ecc_chunk_size,
+						eccbuf, eccbytes,
+						auxiliary_virt,
+						nfc_geo->metadata_size,
+						nfc_geo->ecc_strength);
+			} else {
+				flips = nand_check_erased_ecc_chunk(
+						buf + i * nfc_geo->ecc_chunk_size,
+						nfc_geo->ecc_chunk_size,
+						eccbuf, eccbytes,
+						NULL, 0,
+						nfc_geo->ecc_strength);
+			}
+
+			if (flips > 0) {
+				max_bitflips = max_t(unsigned int, max_bitflips,
+						     flips);
+				mtd->ecc_stats.corrected += flips;
+				continue;
+			}
+
 			mtd->ecc_stats.failed++;
 			continue;
 		}
+
 		mtd->ecc_stats.corrected += *status;
 		max_bitflips = max_t(unsigned int, max_bitflips, *status);
 	}
@@ -1064,11 +1164,6 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
 		chip->oob_poi[0] = ((uint8_t *) auxiliary_virt)[0];
 	}
 
-	read_page_swap_end(this, buf, nfc_geo->payload_size,
-			this->payload_virt, this->payload_phys,
-			nfc_geo->payload_size,
-			payload_virt, payload_phys);
-
 	return max_bitflips;
 }
 
@@ -1327,18 +1422,19 @@ static int gpmi_ecc_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
 static int
 gpmi_ecc_write_oob(struct mtd_info *mtd, struct nand_chip *chip, int page)
 {
-	struct nand_oobfree *of = mtd->ecclayout->oobfree;
+	struct mtd_oob_region of = { };
 	int status = 0;
 
 	/* Do we have available oob area? */
-	if (!of->length)
+	mtd_ooblayout_free(mtd, 0, &of);
+	if (!of.length)
 		return -EPERM;
 
 	if (!nand_is_slc(chip))
 		return -EPERM;
 
-	chip->cmdfunc(mtd, NAND_CMD_SEQIN, mtd->writesize + of->offset, page);
-	chip->write_buf(mtd, chip->oob_poi + of->offset, of->length);
+	chip->cmdfunc(mtd, NAND_CMD_SEQIN, mtd->writesize + of.offset, page);
+	chip->write_buf(mtd, chip->oob_poi + of.offset, of.length);
 	chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
 
 	status = chip->waitfunc(mtd, chip);
@@ -1840,6 +1936,7 @@ static void gpmi_nand_exit(struct gpmi_nand_data *this)
 static int gpmi_init_last(struct gpmi_nand_data *this)
 {
 	struct nand_chip *chip = &this->nand;
+	struct mtd_info *mtd = nand_to_mtd(chip);
 	struct nand_ecc_ctrl *ecc = &chip->ecc;
 	struct bch_geometry *bch_geo = &this->bch_geometry;
 	int ret;
@@ -1861,7 +1958,7 @@ static int gpmi_init_last(struct gpmi_nand_data *this)
 	ecc->mode	= NAND_ECC_HW;
 	ecc->size	= bch_geo->ecc_chunk_size;
 	ecc->strength	= bch_geo->ecc_strength;
-	ecc->layout	= &gpmi_hw_ecclayout;
+	mtd_set_ooblayout(mtd, &gpmi_ooblayout_ops);
 
 	/*
 	 * We only enable the subpage read when:
@@ -1914,16 +2011,6 @@ static int gpmi_nand_init(struct gpmi_nand_data *this)
 	/* Set up swap_block_mark, must be set before the gpmi_set_geometry() */
 	this->swap_block_mark = !GPMI_IS_MX23(this);
 
-	if (of_get_nand_on_flash_bbt(this->dev->of_node)) {
-		chip->bbt_options |= NAND_BBT_USE_FLASH | NAND_BBT_NO_OOB;
-
-		if (of_property_read_bool(this->dev->of_node,
-						"fsl,no-blockmark-swap"))
-			this->swap_block_mark = false;
-	}
-	dev_dbg(this->dev, "Blockmark swapping %sabled\n",
-		this->swap_block_mark ? "en" : "dis");
-
 	/*
 	 * Allocate a temporary DMA buffer for reading ID in the
 	 * nand_scan_ident().
@@ -1938,6 +2025,16 @@ static int gpmi_nand_init(struct gpmi_nand_data *this)
 	if (ret)
 		goto err_out;
 
+	if (chip->bbt_options & NAND_BBT_USE_FLASH) {
+		chip->bbt_options |= NAND_BBT_NO_OOB;
+
+		if (of_property_read_bool(this->dev->of_node,
+						"fsl,no-blockmark-swap"))
+			this->swap_block_mark = false;
+	}
+	dev_dbg(this->dev, "Blockmark swapping %sabled\n",
+		this->swap_block_mark ? "en" : "dis");
+
 	ret = gpmi_init_last(this);
 	if (ret)
 		goto err_out;