summaryrefslogtreecommitdiff
path: root/drivers/net/cris/eth_v10.c
diff options
context:
space:
mode:
authorAndré Fabian Silva Delgado <emulatorman@parabola.nu>2015-08-05 17:04:01 -0300
committerAndré Fabian Silva Delgado <emulatorman@parabola.nu>2015-08-05 17:04:01 -0300
commit57f0f512b273f60d52568b8c6b77e17f5636edc0 (patch)
tree5e910f0e82173f4ef4f51111366a3f1299037a7b /drivers/net/cris/eth_v10.c
Initial import
Diffstat (limited to 'drivers/net/cris/eth_v10.c')
-rw-r--r--drivers/net/cris/eth_v10.c1746
1 files changed, 1746 insertions, 0 deletions
diff --git a/drivers/net/cris/eth_v10.c b/drivers/net/cris/eth_v10.c
new file mode 100644
index 000000000..64c016a99
--- /dev/null
+++ b/drivers/net/cris/eth_v10.c
@@ -0,0 +1,1746 @@
+/*
+ * e100net.c: A network driver for the ETRAX 100LX network controller.
+ *
+ * Copyright (c) 1998-2002 Axis Communications AB.
+ *
+ * The outline of this driver comes from skeleton.c.
+ *
+ */
+
+
+#include <linux/module.h>
+
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/interrupt.h>
+#include <linux/ptrace.h>
+#include <linux/ioport.h>
+#include <linux/in.h>
+#include <linux/string.h>
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+
+#include <linux/if.h>
+#include <linux/mii.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/ethtool.h>
+
+#include <arch/svinto.h>/* DMA and register descriptions */
+#include <asm/io.h> /* CRIS_LED_* I/O functions */
+#include <asm/irq.h>
+#include <asm/dma.h>
+#include <asm/ethernet.h>
+#include <asm/cache.h>
+#include <arch/io_interface_mux.h>
+
+//#define ETHDEBUG
+#define D(x)
+
+/*
+ * The name of the card. Is used for messages and in the requests for
+ * io regions, irqs and dma channels
+ */
+
+static const char* cardname = "ETRAX 100LX built-in ethernet controller";
+
+/* A default ethernet address. Highlevel SW will set the real one later */
+
+static struct sockaddr default_mac = {
+ 0,
+ { 0x00, 0x40, 0x8C, 0xCD, 0x00, 0x00 }
+};
+
+/* Information that need to be kept for each board. */
+struct net_local {
+ struct mii_if_info mii_if;
+
+ /* Tx control lock. This protects the transmit buffer ring
+ * state along with the "tx full" state of the driver. This
+ * means all netif_queue flow control actions are protected
+ * by this lock as well.
+ */
+ spinlock_t lock;
+
+ spinlock_t led_lock; /* Protect LED state */
+ spinlock_t transceiver_lock; /* Protect transceiver state. */
+};
+
+typedef struct etrax_eth_descr
+{
+ etrax_dma_descr descr;
+ struct sk_buff* skb;
+} etrax_eth_descr;
+
+/* Some transceivers requires special handling */
+struct transceiver_ops
+{
+ unsigned int oui;
+ void (*check_speed)(struct net_device* dev);
+ void (*check_duplex)(struct net_device* dev);
+};
+
+/* Duplex settings */
+enum duplex
+{
+ half,
+ full,
+ autoneg
+};
+
+/* Dma descriptors etc. */
+
+#define MAX_MEDIA_DATA_SIZE 1522
+
+#define MIN_PACKET_LEN 46
+#define ETHER_HEAD_LEN 14
+
+/*
+** MDIO constants.
+*/
+#define MDIO_START 0x1
+#define MDIO_READ 0x2
+#define MDIO_WRITE 0x1
+#define MDIO_PREAMBLE 0xfffffffful
+
+/* Broadcom specific */
+#define MDIO_AUX_CTRL_STATUS_REG 0x18
+#define MDIO_BC_FULL_DUPLEX_IND 0x1
+#define MDIO_BC_SPEED 0x2
+
+/* TDK specific */
+#define MDIO_TDK_DIAGNOSTIC_REG 18
+#define MDIO_TDK_DIAGNOSTIC_RATE 0x400
+#define MDIO_TDK_DIAGNOSTIC_DPLX 0x800
+
+/*Intel LXT972A specific*/
+#define MDIO_INT_STATUS_REG_2 0x0011
+#define MDIO_INT_FULL_DUPLEX_IND (1 << 9)
+#define MDIO_INT_SPEED (1 << 14)
+
+/* Network flash constants */
+#define NET_FLASH_TIME (HZ/50) /* 20 ms */
+#define NET_FLASH_PAUSE (HZ/100) /* 10 ms */
+#define NET_LINK_UP_CHECK_INTERVAL (2*HZ) /* 2 s */
+#define NET_DUPLEX_CHECK_INTERVAL (2*HZ) /* 2 s */
+
+#define NO_NETWORK_ACTIVITY 0
+#define NETWORK_ACTIVITY 1
+
+#define NBR_OF_RX_DESC 32
+#define NBR_OF_TX_DESC 16
+
+/* Large packets are sent directly to upper layers while small packets are */
+/* copied (to reduce memory waste). The following constant decides the breakpoint */
+#define RX_COPYBREAK 256
+
+/* Due to a chip bug we need to flush the cache when descriptors are returned */
+/* to the DMA. To decrease performance impact we return descriptors in chunks. */
+/* The following constant determines the number of descriptors to return. */
+#define RX_QUEUE_THRESHOLD NBR_OF_RX_DESC/2
+
+#define GET_BIT(bit,val) (((val) >> (bit)) & 0x01)
+
+/* Define some macros to access ETRAX 100 registers */
+#define SETF(var, reg, field, val) var = (var & ~IO_MASK_(reg##_, field##_)) | \
+ IO_FIELD_(reg##_, field##_, val)
+#define SETS(var, reg, field, val) var = (var & ~IO_MASK_(reg##_, field##_)) | \
+ IO_STATE_(reg##_, field##_, _##val)
+
+static etrax_eth_descr *myNextRxDesc; /* Points to the next descriptor to
+ to be processed */
+static etrax_eth_descr *myLastRxDesc; /* The last processed descriptor */
+
+static etrax_eth_descr RxDescList[NBR_OF_RX_DESC] __attribute__ ((aligned(32)));
+
+static etrax_eth_descr* myFirstTxDesc; /* First packet not yet sent */
+static etrax_eth_descr* myLastTxDesc; /* End of send queue */
+static etrax_eth_descr* myNextTxDesc; /* Next descriptor to use */
+static etrax_eth_descr TxDescList[NBR_OF_TX_DESC] __attribute__ ((aligned(32)));
+
+static unsigned int network_rec_config_shadow = 0;
+
+static unsigned int network_tr_ctrl_shadow = 0;
+
+/* Network speed indication. */
+static DEFINE_TIMER(speed_timer, NULL, 0, 0);
+static DEFINE_TIMER(clear_led_timer, NULL, 0, 0);
+static int current_speed; /* Speed read from transceiver */
+static int current_speed_selection; /* Speed selected by user */
+static unsigned long led_next_time;
+static int led_active;
+static int rx_queue_len;
+
+/* Duplex */
+static DEFINE_TIMER(duplex_timer, NULL, 0, 0);
+static int full_duplex;
+static enum duplex current_duplex;
+
+/* Index to functions, as function prototypes. */
+
+static int etrax_ethernet_init(void);
+
+static int e100_open(struct net_device *dev);
+static int e100_set_mac_address(struct net_device *dev, void *addr);
+static int e100_send_packet(struct sk_buff *skb, struct net_device *dev);
+static irqreturn_t e100rxtx_interrupt(int irq, void *dev_id);
+static irqreturn_t e100nw_interrupt(int irq, void *dev_id);
+static void e100_rx(struct net_device *dev);
+static int e100_close(struct net_device *dev);
+static int e100_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd);
+static int e100_set_config(struct net_device* dev, struct ifmap* map);
+static void e100_tx_timeout(struct net_device *dev);
+static struct net_device_stats *e100_get_stats(struct net_device *dev);
+static void set_multicast_list(struct net_device *dev);
+static void e100_hardware_send_packet(struct net_local* np, char *buf, int length);
+static void update_rx_stats(struct net_device_stats *);
+static void update_tx_stats(struct net_device_stats *);
+static int e100_probe_transceiver(struct net_device* dev);
+
+static void e100_check_speed(unsigned long priv);
+static void e100_set_speed(struct net_device* dev, unsigned long speed);
+static void e100_check_duplex(unsigned long priv);
+static void e100_set_duplex(struct net_device* dev, enum duplex);
+static void e100_negotiate(struct net_device* dev);
+
+static int e100_get_mdio_reg(struct net_device *dev, int phy_id, int location);
+static void e100_set_mdio_reg(struct net_device *dev, int phy_id, int location, int value);
+
+static void e100_send_mdio_cmd(unsigned short cmd, int write_cmd);
+static void e100_send_mdio_bit(unsigned char bit);
+static unsigned char e100_receive_mdio_bit(void);
+static void e100_reset_transceiver(struct net_device* net);
+
+static void e100_clear_network_leds(unsigned long dummy);
+static void e100_set_network_leds(int active);
+
+static const struct ethtool_ops e100_ethtool_ops;
+#if defined(CONFIG_ETRAX_NO_PHY)
+static void dummy_check_speed(struct net_device* dev);
+static void dummy_check_duplex(struct net_device* dev);
+#else
+static void broadcom_check_speed(struct net_device* dev);
+static void broadcom_check_duplex(struct net_device* dev);
+static void tdk_check_speed(struct net_device* dev);
+static void tdk_check_duplex(struct net_device* dev);
+static void intel_check_speed(struct net_device* dev);
+static void intel_check_duplex(struct net_device* dev);
+static void generic_check_speed(struct net_device* dev);
+static void generic_check_duplex(struct net_device* dev);
+#endif
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void e100_netpoll(struct net_device* dev);
+#endif
+
+static int autoneg_normal = 1;
+
+struct transceiver_ops transceivers[] =
+{
+#if defined(CONFIG_ETRAX_NO_PHY)
+ {0x0000, dummy_check_speed, dummy_check_duplex} /* Dummy */
+#else
+ {0x1018, broadcom_check_speed, broadcom_check_duplex}, /* Broadcom */
+ {0xC039, tdk_check_speed, tdk_check_duplex}, /* TDK 2120 */
+ {0x039C, tdk_check_speed, tdk_check_duplex}, /* TDK 2120C */
+ {0x04de, intel_check_speed, intel_check_duplex}, /* Intel LXT972A*/
+ {0x0000, generic_check_speed, generic_check_duplex} /* Generic, must be last */
+#endif
+};
+
+struct transceiver_ops* transceiver = &transceivers[0];
+
+static const struct net_device_ops e100_netdev_ops = {
+ .ndo_open = e100_open,
+ .ndo_stop = e100_close,
+ .ndo_start_xmit = e100_send_packet,
+ .ndo_tx_timeout = e100_tx_timeout,
+ .ndo_get_stats = e100_get_stats,
+ .ndo_set_rx_mode = set_multicast_list,
+ .ndo_do_ioctl = e100_ioctl,
+ .ndo_set_mac_address = e100_set_mac_address,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_set_config = e100_set_config,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = e100_netpoll,
+#endif
+};
+
+#define tx_done(dev) (*R_DMA_CH0_CMD == 0)
+
+/*
+ * Check for a network adaptor of this type, and return '0' if one exists.
+ * If dev->base_addr == 0, probe all likely locations.
+ * If dev->base_addr == 1, always return failure.
+ * If dev->base_addr == 2, allocate space for the device and return success
+ * (detachable devices only).
+ */
+
+static int __init
+etrax_ethernet_init(void)
+{
+ struct net_device *dev;
+ struct net_local* np;
+ int i, err;
+
+ printk(KERN_INFO
+ "ETRAX 100LX 10/100MBit ethernet v2.0 (c) 1998-2007 Axis Communications AB\n");
+
+ if (cris_request_io_interface(if_eth, cardname)) {
+ printk(KERN_CRIT "etrax_ethernet_init failed to get IO interface\n");
+ return -EBUSY;
+ }
+
+ dev = alloc_etherdev(sizeof(struct net_local));
+ if (!dev)
+ return -ENOMEM;
+
+ np = netdev_priv(dev);
+
+ /* we do our own locking */
+ dev->features |= NETIF_F_LLTX;
+
+ dev->base_addr = (unsigned int)R_NETWORK_SA_0; /* just to have something to show */
+
+ /* now setup our etrax specific stuff */
+
+ dev->irq = NETWORK_DMA_RX_IRQ_NBR; /* we really use DMATX as well... */
+ dev->dma = NETWORK_RX_DMA_NBR;
+
+ /* fill in our handlers so the network layer can talk to us in the future */
+
+ dev->ethtool_ops = &e100_ethtool_ops;
+ dev->netdev_ops = &e100_netdev_ops;
+
+ spin_lock_init(&np->lock);
+ spin_lock_init(&np->led_lock);
+ spin_lock_init(&np->transceiver_lock);
+
+ /* Initialise the list of Etrax DMA-descriptors */
+
+ /* Initialise receive descriptors */
+
+ for (i = 0; i < NBR_OF_RX_DESC; i++) {
+ /* Allocate two extra cachelines to make sure that buffer used
+ * by DMA does not share cacheline with any other data (to
+ * avoid cache bug)
+ */
+ RxDescList[i].skb = dev_alloc_skb(MAX_MEDIA_DATA_SIZE + 2 * L1_CACHE_BYTES);
+ if (!RxDescList[i].skb)
+ return -ENOMEM;
+ RxDescList[i].descr.ctrl = 0;
+ RxDescList[i].descr.sw_len = MAX_MEDIA_DATA_SIZE;
+ RxDescList[i].descr.next = virt_to_phys(&RxDescList[i + 1]);
+ RxDescList[i].descr.buf = L1_CACHE_ALIGN(virt_to_phys(RxDescList[i].skb->data));
+ RxDescList[i].descr.status = 0;
+ RxDescList[i].descr.hw_len = 0;
+ prepare_rx_descriptor(&RxDescList[i].descr);
+ }
+
+ RxDescList[NBR_OF_RX_DESC - 1].descr.ctrl = d_eol;
+ RxDescList[NBR_OF_RX_DESC - 1].descr.next = virt_to_phys(&RxDescList[0]);
+ rx_queue_len = 0;
+
+ /* Initialize transmit descriptors */
+ for (i = 0; i < NBR_OF_TX_DESC; i++) {
+ TxDescList[i].descr.ctrl = 0;
+ TxDescList[i].descr.sw_len = 0;
+ TxDescList[i].descr.next = virt_to_phys(&TxDescList[i + 1].descr);
+ TxDescList[i].descr.buf = 0;
+ TxDescList[i].descr.status = 0;
+ TxDescList[i].descr.hw_len = 0;
+ TxDescList[i].skb = 0;
+ }
+
+ TxDescList[NBR_OF_TX_DESC - 1].descr.ctrl = d_eol;
+ TxDescList[NBR_OF_TX_DESC - 1].descr.next = virt_to_phys(&TxDescList[0].descr);
+
+ /* Initialise initial pointers */
+
+ myNextRxDesc = &RxDescList[0];
+ myLastRxDesc = &RxDescList[NBR_OF_RX_DESC - 1];
+ myFirstTxDesc = &TxDescList[0];
+ myNextTxDesc = &TxDescList[0];
+ myLastTxDesc = &TxDescList[NBR_OF_TX_DESC - 1];
+
+ /* Register device */
+ err = register_netdev(dev);
+ if (err) {
+ free_netdev(dev);
+ return err;
+ }
+
+ /* set the default MAC address */
+
+ e100_set_mac_address(dev, &default_mac);
+
+ /* Initialize speed indicator stuff. */
+
+ current_speed = 10;
+ current_speed_selection = 0; /* Auto */
+ speed_timer.expires = jiffies + NET_LINK_UP_CHECK_INTERVAL;
+ speed_timer.data = (unsigned long)dev;
+ speed_timer.function = e100_check_speed;
+
+ clear_led_timer.function = e100_clear_network_leds;
+ clear_led_timer.data = (unsigned long)dev;
+
+ full_duplex = 0;
+ current_duplex = autoneg;
+ duplex_timer.expires = jiffies + NET_DUPLEX_CHECK_INTERVAL;
+ duplex_timer.data = (unsigned long)dev;
+ duplex_timer.function = e100_check_duplex;
+
+ /* Initialize mii interface */
+ np->mii_if.phy_id_mask = 0x1f;
+ np->mii_if.reg_num_mask = 0x1f;
+ np->mii_if.dev = dev;
+ np->mii_if.mdio_read = e100_get_mdio_reg;
+ np->mii_if.mdio_write = e100_set_mdio_reg;
+
+ /* Initialize group address registers to make sure that no */
+ /* unwanted addresses are matched */
+ *R_NETWORK_GA_0 = 0x00000000;
+ *R_NETWORK_GA_1 = 0x00000000;
+
+ /* Initialize next time the led can flash */
+ led_next_time = jiffies;
+ return 0;
+}
+
+/* set MAC address of the interface. called from the core after a
+ * SIOCSIFADDR ioctl, and from the bootup above.
+ */
+
+static int
+e100_set_mac_address(struct net_device *dev, void *p)
+{
+ struct net_local *np = netdev_priv(dev);
+ struct sockaddr *addr = p;
+
+ spin_lock(&np->lock); /* preemption protection */
+
+ /* remember it */
+
+ memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
+
+ /* Write it to the hardware.
+ * Note the way the address is wrapped:
+ * *R_NETWORK_SA_0 = a0_0 | (a0_1 << 8) | (a0_2 << 16) | (a0_3 << 24);
+ * *R_NETWORK_SA_1 = a0_4 | (a0_5 << 8);
+ */
+
+ *R_NETWORK_SA_0 = dev->dev_addr[0] | (dev->dev_addr[1] << 8) |
+ (dev->dev_addr[2] << 16) | (dev->dev_addr[3] << 24);
+ *R_NETWORK_SA_1 = dev->dev_addr[4] | (dev->dev_addr[5] << 8);
+ *R_NETWORK_SA_2 = 0;
+
+ /* show it in the log as well */
+
+ printk(KERN_INFO "%s: changed MAC to %pM\n", dev->name, dev->dev_addr);
+
+ spin_unlock(&np->lock);
+
+ return 0;
+}
+
+/*
+ * Open/initialize the board. This is called (in the current kernel)
+ * sometime after booting when the 'ifconfig' program is run.
+ *
+ * This routine should set everything up anew at each open, even
+ * registers that "should" only need to be set once at boot, so that
+ * there is non-reboot way to recover if something goes wrong.
+ */
+
+static int
+e100_open(struct net_device *dev)
+{
+ unsigned long flags;
+
+ /* enable the MDIO output pin */
+
+ *R_NETWORK_MGM_CTRL = IO_STATE(R_NETWORK_MGM_CTRL, mdoe, enable);
+
+ *R_IRQ_MASK0_CLR =
+ IO_STATE(R_IRQ_MASK0_CLR, overrun, clr) |
+ IO_STATE(R_IRQ_MASK0_CLR, underrun, clr) |
+ IO_STATE(R_IRQ_MASK0_CLR, excessive_col, clr);
+
+ /* clear dma0 and 1 eop and descr irq masks */
+ *R_IRQ_MASK2_CLR =
+ IO_STATE(R_IRQ_MASK2_CLR, dma0_descr, clr) |
+ IO_STATE(R_IRQ_MASK2_CLR, dma0_eop, clr) |
+ IO_STATE(R_IRQ_MASK2_CLR, dma1_descr, clr) |
+ IO_STATE(R_IRQ_MASK2_CLR, dma1_eop, clr);
+
+ /* Reset and wait for the DMA channels */
+
+ RESET_DMA(NETWORK_TX_DMA_NBR);
+ RESET_DMA(NETWORK_RX_DMA_NBR);
+ WAIT_DMA(NETWORK_TX_DMA_NBR);
+ WAIT_DMA(NETWORK_RX_DMA_NBR);
+
+ /* Initialise the etrax network controller */
+
+ /* allocate the irq corresponding to the receiving DMA */
+
+ if (request_irq(NETWORK_DMA_RX_IRQ_NBR, e100rxtx_interrupt, 0, cardname,
+ (void *)dev)) {
+ goto grace_exit0;
+ }
+
+ /* allocate the irq corresponding to the transmitting DMA */
+
+ if (request_irq(NETWORK_DMA_TX_IRQ_NBR, e100rxtx_interrupt, 0,
+ cardname, (void *)dev)) {
+ goto grace_exit1;
+ }
+
+ /* allocate the irq corresponding to the network errors etc */
+
+ if (request_irq(NETWORK_STATUS_IRQ_NBR, e100nw_interrupt, 0,
+ cardname, (void *)dev)) {
+ goto grace_exit2;
+ }
+
+ /*
+ * Always allocate the DMA channels after the IRQ,
+ * and clean up on failure.
+ */
+
+ if (cris_request_dma(NETWORK_TX_DMA_NBR,
+ cardname,
+ DMA_VERBOSE_ON_ERROR,
+ dma_eth)) {
+ goto grace_exit3;
+ }
+
+ if (cris_request_dma(NETWORK_RX_DMA_NBR,
+ cardname,
+ DMA_VERBOSE_ON_ERROR,
+ dma_eth)) {
+ goto grace_exit4;
+ }
+
+ /* give the HW an idea of what MAC address we want */
+
+ *R_NETWORK_SA_0 = dev->dev_addr[0] | (dev->dev_addr[1] << 8) |
+ (dev->dev_addr[2] << 16) | (dev->dev_addr[3] << 24);
+ *R_NETWORK_SA_1 = dev->dev_addr[4] | (dev->dev_addr[5] << 8);
+ *R_NETWORK_SA_2 = 0;
+
+#if 0
+ /* use promiscuous mode for testing */
+ *R_NETWORK_GA_0 = 0xffffffff;
+ *R_NETWORK_GA_1 = 0xffffffff;
+
+ *R_NETWORK_REC_CONFIG = 0xd; /* broadcast rec, individ. rec, ma0 enabled */
+#else
+ SETS(network_rec_config_shadow, R_NETWORK_REC_CONFIG, max_size, size1522);
+ SETS(network_rec_config_shadow, R_NETWORK_REC_CONFIG, broadcast, receive);
+ SETS(network_rec_config_shadow, R_NETWORK_REC_CONFIG, ma0, enable);
+ SETF(network_rec_config_shadow, R_NETWORK_REC_CONFIG, duplex, full_duplex);
+ *R_NETWORK_REC_CONFIG = network_rec_config_shadow;
+#endif
+
+ *R_NETWORK_GEN_CONFIG =
+ IO_STATE(R_NETWORK_GEN_CONFIG, phy, mii_clk) |
+ IO_STATE(R_NETWORK_GEN_CONFIG, enable, on);
+
+ SETS(network_tr_ctrl_shadow, R_NETWORK_TR_CTRL, clr_error, clr);
+ SETS(network_tr_ctrl_shadow, R_NETWORK_TR_CTRL, delay, none);
+ SETS(network_tr_ctrl_shadow, R_NETWORK_TR_CTRL, cancel, dont);
+ SETS(network_tr_ctrl_shadow, R_NETWORK_TR_CTRL, cd, enable);
+ SETS(network_tr_ctrl_shadow, R_NETWORK_TR_CTRL, retry, enable);
+ SETS(network_tr_ctrl_shadow, R_NETWORK_TR_CTRL, pad, enable);
+ SETS(network_tr_ctrl_shadow, R_NETWORK_TR_CTRL, crc, enable);
+ *R_NETWORK_TR_CTRL = network_tr_ctrl_shadow;
+
+ local_irq_save(flags);
+
+ /* enable the irq's for ethernet DMA */
+
+ *R_IRQ_MASK2_SET =
+ IO_STATE(R_IRQ_MASK2_SET, dma0_eop, set) |
+ IO_STATE(R_IRQ_MASK2_SET, dma1_eop, set);
+
+ *R_IRQ_MASK0_SET =
+ IO_STATE(R_IRQ_MASK0_SET, overrun, set) |
+ IO_STATE(R_IRQ_MASK0_SET, underrun, set) |
+ IO_STATE(R_IRQ_MASK0_SET, excessive_col, set);
+
+ /* make sure the irqs are cleared */
+
+ *R_DMA_CH0_CLR_INTR = IO_STATE(R_DMA_CH0_CLR_INTR, clr_eop, do);
+ *R_DMA_CH1_CLR_INTR = IO_STATE(R_DMA_CH1_CLR_INTR, clr_eop, do);
+
+ /* make sure the rec and transmit error counters are cleared */
+
+ (void)*R_REC_COUNTERS; /* dummy read */
+ (void)*R_TR_COUNTERS; /* dummy read */
+
+ /* start the receiving DMA channel so we can receive packets from now on */
+
+ *R_DMA_CH1_FIRST = virt_to_phys(myNextRxDesc);
+ *R_DMA_CH1_CMD = IO_STATE(R_DMA_CH1_CMD, cmd, start);
+
+ /* Set up transmit DMA channel so it can be restarted later */
+
+ *R_DMA_CH0_FIRST = 0;
+ *R_DMA_CH0_DESCR = virt_to_phys(myLastTxDesc);
+ netif_start_queue(dev);
+
+ local_irq_restore(flags);
+
+ /* Probe for transceiver */
+ if (e100_probe_transceiver(dev))
+ goto grace_exit5;
+
+ /* Start duplex/speed timers */
+ add_timer(&speed_timer);
+ add_timer(&duplex_timer);
+
+ /* We are now ready to accept transmit requeusts from
+ * the queueing layer of the networking.
+ */
+ netif_carrier_on(dev);
+
+ return 0;
+
+grace_exit5:
+ cris_free_dma(NETWORK_RX_DMA_NBR, cardname);
+grace_exit4:
+ cris_free_dma(NETWORK_TX_DMA_NBR, cardname);
+grace_exit3:
+ free_irq(NETWORK_STATUS_IRQ_NBR, (void *)dev);
+grace_exit2:
+ free_irq(NETWORK_DMA_TX_IRQ_NBR, (void *)dev);
+grace_exit1:
+ free_irq(NETWORK_DMA_RX_IRQ_NBR, (void *)dev);
+grace_exit0:
+ return -EAGAIN;
+}
+
+#if defined(CONFIG_ETRAX_NO_PHY)
+static void
+dummy_check_speed(struct net_device* dev)
+{
+ current_speed = 100;
+}
+#else
+static void
+generic_check_speed(struct net_device* dev)
+{
+ unsigned long data;
+ struct net_local *np = netdev_priv(dev);
+
+ data = e100_get_mdio_reg(dev, np->mii_if.phy_id, MII_ADVERTISE);
+ if ((data & ADVERTISE_100FULL) ||
+ (data & ADVERTISE_100HALF))
+ current_speed = 100;
+ else
+ current_speed = 10;
+}
+
+static void
+tdk_check_speed(struct net_device* dev)
+{
+ unsigned long data;
+ struct net_local *np = netdev_priv(dev);
+
+ data = e100_get_mdio_reg(dev, np->mii_if.phy_id,
+ MDIO_TDK_DIAGNOSTIC_REG);
+ current_speed = (data & MDIO_TDK_DIAGNOSTIC_RATE ? 100 : 10);
+}
+
+static void
+broadcom_check_speed(struct net_device* dev)
+{
+ unsigned long data;
+ struct net_local *np = netdev_priv(dev);
+
+ data = e100_get_mdio_reg(dev, np->mii_if.phy_id,
+ MDIO_AUX_CTRL_STATUS_REG);
+ current_speed = (data & MDIO_BC_SPEED ? 100 : 10);
+}
+
+static void
+intel_check_speed(struct net_device* dev)
+{
+ unsigned long data;
+ struct net_local *np = netdev_priv(dev);
+
+ data = e100_get_mdio_reg(dev, np->mii_if.phy_id,
+ MDIO_INT_STATUS_REG_2);
+ current_speed = (data & MDIO_INT_SPEED ? 100 : 10);
+}
+#endif
+static void
+e100_check_speed(unsigned long priv)
+{
+ struct net_device* dev = (struct net_device*)priv;
+ struct net_local *np = netdev_priv(dev);
+ static int led_initiated = 0;
+ unsigned long data;
+ int old_speed = current_speed;
+
+ spin_lock(&np->transceiver_lock);
+
+ data = e100_get_mdio_reg(dev, np->mii_if.phy_id, MII_BMSR);
+ if (!(data & BMSR_LSTATUS)) {
+ current_speed = 0;
+ } else {
+ transceiver->check_speed(dev);
+ }
+
+ spin_lock(&np->led_lock);
+ if ((old_speed != current_speed) || !led_initiated) {
+ led_initiated = 1;
+ e100_set_network_leds(NO_NETWORK_ACTIVITY);
+ if (current_speed)
+ netif_carrier_on(dev);
+ else
+ netif_carrier_off(dev);
+ }
+ spin_unlock(&np->led_lock);
+
+ /* Reinitialize the timer. */
+ speed_timer.expires = jiffies + NET_LINK_UP_CHECK_INTERVAL;
+ add_timer(&speed_timer);
+
+ spin_unlock(&np->transceiver_lock);
+}
+
+static void
+e100_negotiate(struct net_device* dev)
+{
+ struct net_local *np = netdev_priv(dev);
+ unsigned short data = e100_get_mdio_reg(dev, np->mii_if.phy_id,
+ MII_ADVERTISE);
+
+ /* Discard old speed and duplex settings */
+ data &= ~(ADVERTISE_100HALF | ADVERTISE_100FULL |
+ ADVERTISE_10HALF | ADVERTISE_10FULL);
+
+ switch (current_speed_selection) {
+ case 10:
+ if (current_duplex == full)
+ data |= ADVERTISE_10FULL;
+ else if (current_duplex == half)
+ data |= ADVERTISE_10HALF;
+ else
+ data |= ADVERTISE_10HALF | ADVERTISE_10FULL;
+ break;
+
+ case 100:
+ if (current_duplex == full)
+ data |= ADVERTISE_100FULL;
+ else if (current_duplex == half)
+ data |= ADVERTISE_100HALF;
+ else
+ data |= ADVERTISE_100HALF | ADVERTISE_100FULL;
+ break;
+
+ case 0: /* Auto */
+ if (current_duplex == full)
+ data |= ADVERTISE_100FULL | ADVERTISE_10FULL;
+ else if (current_duplex == half)
+ data |= ADVERTISE_100HALF | ADVERTISE_10HALF;
+ else
+ data |= ADVERTISE_10HALF | ADVERTISE_10FULL |
+ ADVERTISE_100HALF | ADVERTISE_100FULL;
+ break;
+
+ default: /* assume autoneg speed and duplex */
+ data |= ADVERTISE_10HALF | ADVERTISE_10FULL |
+ ADVERTISE_100HALF | ADVERTISE_100FULL;
+ break;
+ }
+
+ e100_set_mdio_reg(dev, np->mii_if.phy_id, MII_ADVERTISE, data);
+
+ data = e100_get_mdio_reg(dev, np->mii_if.phy_id, MII_BMCR);
+ if (autoneg_normal) {
+ /* Renegotiate with link partner */
+ data |= BMCR_ANENABLE | BMCR_ANRESTART;
+ } else {
+ /* Don't negotiate speed or duplex */
+ data &= ~(BMCR_ANENABLE | BMCR_ANRESTART);
+
+ /* Set speed and duplex static */
+ if (current_speed_selection == 10)
+ data &= ~BMCR_SPEED100;
+ else
+ data |= BMCR_SPEED100;
+
+ if (current_duplex != full)
+ data &= ~BMCR_FULLDPLX;
+ else
+ data |= BMCR_FULLDPLX;
+ }
+ e100_set_mdio_reg(dev, np->mii_if.phy_id, MII_BMCR, data);
+}
+
+static void
+e100_set_speed(struct net_device* dev, unsigned long speed)
+{
+ struct net_local *np = netdev_priv(dev);
+
+ spin_lock(&np->transceiver_lock);
+ if (speed != current_speed_selection) {
+ current_speed_selection = speed;
+ e100_negotiate(dev);
+ }
+ spin_unlock(&np->transceiver_lock);
+}
+
+static void
+e100_check_duplex(unsigned long priv)
+{
+ struct net_device *dev = (struct net_device *)priv;
+ struct net_local *np = netdev_priv(dev);
+ int old_duplex;
+
+ spin_lock(&np->transceiver_lock);
+ old_duplex = full_duplex;
+ transceiver->check_duplex(dev);
+ if (old_duplex != full_duplex) {
+ /* Duplex changed */
+ SETF(network_rec_config_shadow, R_NETWORK_REC_CONFIG, duplex, full_duplex);
+ *R_NETWORK_REC_CONFIG = network_rec_config_shadow;
+ }
+
+ /* Reinitialize the timer. */
+ duplex_timer.expires = jiffies + NET_DUPLEX_CHECK_INTERVAL;
+ add_timer(&duplex_timer);
+ np->mii_if.full_duplex = full_duplex;
+ spin_unlock(&np->transceiver_lock);
+}
+#if defined(CONFIG_ETRAX_NO_PHY)
+static void
+dummy_check_duplex(struct net_device* dev)
+{
+ full_duplex = 1;
+}
+#else
+static void
+generic_check_duplex(struct net_device* dev)
+{
+ unsigned long data;
+ struct net_local *np = netdev_priv(dev);
+
+ data = e100_get_mdio_reg(dev, np->mii_if.phy_id, MII_ADVERTISE);
+ if ((data & ADVERTISE_10FULL) ||
+ (data & ADVERTISE_100FULL))
+ full_duplex = 1;
+ else
+ full_duplex = 0;
+}
+
+static void
+tdk_check_duplex(struct net_device* dev)
+{
+ unsigned long data;
+ struct net_local *np = netdev_priv(dev);
+
+ data = e100_get_mdio_reg(dev, np->mii_if.phy_id,
+ MDIO_TDK_DIAGNOSTIC_REG);
+ full_duplex = (data & MDIO_TDK_DIAGNOSTIC_DPLX) ? 1 : 0;
+}
+
+static void
+broadcom_check_duplex(struct net_device* dev)
+{
+ unsigned long data;
+ struct net_local *np = netdev_priv(dev);
+
+ data = e100_get_mdio_reg(dev, np->mii_if.phy_id,
+ MDIO_AUX_CTRL_STATUS_REG);
+ full_duplex = (data & MDIO_BC_FULL_DUPLEX_IND) ? 1 : 0;
+}
+
+static void
+intel_check_duplex(struct net_device* dev)
+{
+ unsigned long data;
+ struct net_local *np = netdev_priv(dev);
+
+ data = e100_get_mdio_reg(dev, np->mii_if.phy_id,
+ MDIO_INT_STATUS_REG_2);
+ full_duplex = (data & MDIO_INT_FULL_DUPLEX_IND) ? 1 : 0;
+}
+#endif
+static void
+e100_set_duplex(struct net_device* dev, enum duplex new_duplex)
+{
+ struct net_local *np = netdev_priv(dev);
+
+ spin_lock(&np->transceiver_lock);
+ if (new_duplex != current_duplex) {
+ current_duplex = new_duplex;
+ e100_negotiate(dev);
+ }
+ spin_unlock(&np->transceiver_lock);
+}
+
+static int
+e100_probe_transceiver(struct net_device* dev)
+{
+ int ret = 0;
+
+#if !defined(CONFIG_ETRAX_NO_PHY)
+ unsigned int phyid_high;
+ unsigned int phyid_low;
+ unsigned int oui;
+ struct transceiver_ops* ops = NULL;
+ struct net_local *np = netdev_priv(dev);
+
+ spin_lock(&np->transceiver_lock);
+
+ /* Probe MDIO physical address */
+ for (np->mii_if.phy_id = 0; np->mii_if.phy_id <= 31;
+ np->mii_if.phy_id++) {
+ if (e100_get_mdio_reg(dev,
+ np->mii_if.phy_id, MII_BMSR) != 0xffff)
+ break;
+ }
+ if (np->mii_if.phy_id == 32) {
+ ret = -ENODEV;
+ goto out;
+ }
+
+ /* Get manufacturer */
+ phyid_high = e100_get_mdio_reg(dev, np->mii_if.phy_id, MII_PHYSID1);
+ phyid_low = e100_get_mdio_reg(dev, np->mii_if.phy_id, MII_PHYSID2);
+ oui = (phyid_high << 6) | (phyid_low >> 10);
+
+ for (ops = &transceivers[0]; ops->oui; ops++) {
+ if (ops->oui == oui)
+ break;
+ }
+ transceiver = ops;
+out:
+ spin_unlock(&np->transceiver_lock);
+#endif
+ return ret;
+}
+
+static int
+e100_get_mdio_reg(struct net_device *dev, int phy_id, int location)
+{
+ unsigned short cmd; /* Data to be sent on MDIO port */
+ int data; /* Data read from MDIO */
+ int bitCounter;
+
+ /* Start of frame, OP Code, Physical Address, Register Address */
+ cmd = (MDIO_START << 14) | (MDIO_READ << 12) | (phy_id << 7) |
+ (location << 2);
+
+ e100_send_mdio_cmd(cmd, 0);
+
+ data = 0;
+
+ /* Data... */
+ for (bitCounter=15; bitCounter>=0 ; bitCounter--) {
+ data |= (e100_receive_mdio_bit() << bitCounter);
+ }
+
+ return data;
+}
+
+static void
+e100_set_mdio_reg(struct net_device *dev, int phy_id, int location, int value)
+{
+ int bitCounter;
+ unsigned short cmd;
+
+ cmd = (MDIO_START << 14) | (MDIO_WRITE << 12) | (phy_id << 7) |
+ (location << 2);
+
+ e100_send_mdio_cmd(cmd, 1);
+
+ /* Data... */
+ for (bitCounter=15; bitCounter>=0 ; bitCounter--) {
+ e100_send_mdio_bit(GET_BIT(bitCounter, value));
+ }
+
+}
+
+static void
+e100_send_mdio_cmd(unsigned short cmd, int write_cmd)
+{
+ int bitCounter;
+ unsigned char data = 0x2;
+
+ /* Preamble */
+ for (bitCounter = 31; bitCounter>= 0; bitCounter--)
+ e100_send_mdio_bit(GET_BIT(bitCounter, MDIO_PREAMBLE));
+
+ for (bitCounter = 15; bitCounter >= 2; bitCounter--)
+ e100_send_mdio_bit(GET_BIT(bitCounter, cmd));
+
+ /* Turnaround */
+ for (bitCounter = 1; bitCounter >= 0 ; bitCounter--)
+ if (write_cmd)
+ e100_send_mdio_bit(GET_BIT(bitCounter, data));
+ else
+ e100_receive_mdio_bit();
+}
+
+static void
+e100_send_mdio_bit(unsigned char bit)
+{
+ *R_NETWORK_MGM_CTRL =
+ IO_STATE(R_NETWORK_MGM_CTRL, mdoe, enable) |
+ IO_FIELD(R_NETWORK_MGM_CTRL, mdio, bit);
+ udelay(1);
+ *R_NETWORK_MGM_CTRL =
+ IO_STATE(R_NETWORK_MGM_CTRL, mdoe, enable) |
+ IO_MASK(R_NETWORK_MGM_CTRL, mdck) |
+ IO_FIELD(R_NETWORK_MGM_CTRL, mdio, bit);
+ udelay(1);
+}
+
+static unsigned char
+e100_receive_mdio_bit(void)
+{
+ unsigned char bit;
+ *R_NETWORK_MGM_CTRL = 0;
+ bit = IO_EXTRACT(R_NETWORK_STAT, mdio, *R_NETWORK_STAT);
+ udelay(1);
+ *R_NETWORK_MGM_CTRL = IO_MASK(R_NETWORK_MGM_CTRL, mdck);
+ udelay(1);
+ return bit;
+}
+
+static void
+e100_reset_transceiver(struct net_device* dev)
+{
+ struct net_local *np = netdev_priv(dev);
+ unsigned short cmd;
+ unsigned short data;
+ int bitCounter;
+
+ data = e100_get_mdio_reg(dev, np->mii_if.phy_id, MII_BMCR);
+
+ cmd = (MDIO_START << 14) | (MDIO_WRITE << 12) | (np->mii_if.phy_id << 7) | (MII_BMCR << 2);
+
+ e100_send_mdio_cmd(cmd, 1);
+
+ data |= 0x8000;
+
+ for (bitCounter = 15; bitCounter >= 0 ; bitCounter--) {
+ e100_send_mdio_bit(GET_BIT(bitCounter, data));
+ }
+}
+
+/* Called by upper layers if they decide it took too long to complete
+ * sending a packet - we need to reset and stuff.
+ */
+
+static void
+e100_tx_timeout(struct net_device *dev)
+{
+ struct net_local *np = netdev_priv(dev);
+ unsigned long flags;
+
+ spin_lock_irqsave(&np->lock, flags);
+
+ printk(KERN_WARNING "%s: transmit timed out, %s?\n", dev->name,
+ tx_done(dev) ? "IRQ problem" : "network cable problem");
+
+ /* remember we got an error */
+
+ dev->stats.tx_errors++;
+
+ /* reset the TX DMA in case it has hung on something */
+
+ RESET_DMA(NETWORK_TX_DMA_NBR);
+ WAIT_DMA(NETWORK_TX_DMA_NBR);
+
+ /* Reset the transceiver. */
+
+ e100_reset_transceiver(dev);
+
+ /* and get rid of the packets that never got an interrupt */
+ while (myFirstTxDesc != myNextTxDesc) {
+ dev_kfree_skb(myFirstTxDesc->skb);
+ myFirstTxDesc->skb = 0;
+ myFirstTxDesc = phys_to_virt(myFirstTxDesc->descr.next);
+ }
+
+ /* Set up transmit DMA channel so it can be restarted later */
+ *R_DMA_CH0_FIRST = 0;
+ *R_DMA_CH0_DESCR = virt_to_phys(myLastTxDesc);
+
+ /* tell the upper layers we're ok again */
+
+ netif_wake_queue(dev);
+ spin_unlock_irqrestore(&np->lock, flags);
+}
+
+
+/* This will only be invoked if the driver is _not_ in XOFF state.
+ * What this means is that we need not check it, and that this
+ * invariant will hold if we make sure that the netif_*_queue()
+ * calls are done at the proper times.
+ */
+
+static int
+e100_send_packet(struct sk_buff *skb, struct net_device *dev)
+{
+ struct net_local *np = netdev_priv(dev);
+ unsigned char *buf = skb->data;
+ unsigned long flags;
+
+#ifdef ETHDEBUG
+ printk("send packet len %d\n", length);
+#endif
+ spin_lock_irqsave(&np->lock, flags); /* protect from tx_interrupt and ourself */
+
+ myNextTxDesc->skb = skb;
+
+ dev->trans_start = jiffies; /* NETIF_F_LLTX driver :( */
+
+ e100_hardware_send_packet(np, buf, skb->len);
+
+ myNextTxDesc = phys_to_virt(myNextTxDesc->descr.next);
+
+ /* Stop queue if full */
+ if (myNextTxDesc == myFirstTxDesc) {
+ netif_stop_queue(dev);
+ }
+
+ spin_unlock_irqrestore(&np->lock, flags);
+
+ return NETDEV_TX_OK;
+}
+
+/*
+ * The typical workload of the driver:
+ * Handle the network interface interrupts.
+ */
+
+static irqreturn_t
+e100rxtx_interrupt(int irq, void *dev_id)
+{
+ struct net_device *dev = (struct net_device *)dev_id;
+ unsigned long irqbits;
+
+ /*
+ * Note that both rx and tx interrupts are blocked at this point,
+ * regardless of which got us here.
+ */
+
+ irqbits = *R_IRQ_MASK2_RD;
+
+ /* Handle received packets */
+ if (irqbits & IO_STATE(R_IRQ_MASK2_RD, dma1_eop, active)) {
+ /* acknowledge the eop interrupt */
+
+ *R_DMA_CH1_CLR_INTR = IO_STATE(R_DMA_CH1_CLR_INTR, clr_eop, do);
+
+ /* check if one or more complete packets were indeed received */
+
+ while ((*R_DMA_CH1_FIRST != virt_to_phys(myNextRxDesc)) &&
+ (myNextRxDesc != myLastRxDesc)) {
+ /* Take out the buffer and give it to the OS, then
+ * allocate a new buffer to put a packet in.
+ */
+ e100_rx(dev);
+ dev->stats.rx_packets++;
+ /* restart/continue on the channel, for safety */
+ *R_DMA_CH1_CMD = IO_STATE(R_DMA_CH1_CMD, cmd, restart);
+ /* clear dma channel 1 eop/descr irq bits */
+ *R_DMA_CH1_CLR_INTR =
+ IO_STATE(R_DMA_CH1_CLR_INTR, clr_eop, do) |
+ IO_STATE(R_DMA_CH1_CLR_INTR, clr_descr, do);
+
+ /* now, we might have gotten another packet
+ so we have to loop back and check if so */
+ }
+ }
+
+ /* Report any packets that have been sent */
+ while (virt_to_phys(myFirstTxDesc) != *R_DMA_CH0_FIRST &&
+ (netif_queue_stopped(dev) || myFirstTxDesc != myNextTxDesc)) {
+ dev->stats.tx_bytes += myFirstTxDesc->skb->len;
+ dev->stats.tx_packets++;
+
+ /* dma is ready with the transmission of the data in tx_skb, so now
+ we can release the skb memory */
+ dev_kfree_skb_irq(myFirstTxDesc->skb);
+ myFirstTxDesc->skb = 0;
+ myFirstTxDesc = phys_to_virt(myFirstTxDesc->descr.next);
+ /* Wake up queue. */
+ netif_wake_queue(dev);
+ }
+
+ if (irqbits & IO_STATE(R_IRQ_MASK2_RD, dma0_eop, active)) {
+ /* acknowledge the eop interrupt. */
+ *R_DMA_CH0_CLR_INTR = IO_STATE(R_DMA_CH0_CLR_INTR, clr_eop, do);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t
+e100nw_interrupt(int irq, void *dev_id)
+{
+ struct net_device *dev = (struct net_device *)dev_id;
+ unsigned long irqbits = *R_IRQ_MASK0_RD;
+
+ /* check for underrun irq */
+ if (irqbits & IO_STATE(R_IRQ_MASK0_RD, underrun, active)) {
+ SETS(network_tr_ctrl_shadow, R_NETWORK_TR_CTRL, clr_error, clr);
+ *R_NETWORK_TR_CTRL = network_tr_ctrl_shadow;
+ SETS(network_tr_ctrl_shadow, R_NETWORK_TR_CTRL, clr_error, nop);
+ dev->stats.tx_errors++;
+ D(printk("ethernet receiver underrun!\n"));
+ }
+
+ /* check for overrun irq */
+ if (irqbits & IO_STATE(R_IRQ_MASK0_RD, overrun, active)) {
+ update_rx_stats(&dev->stats); /* this will ack the irq */
+ D(printk("ethernet receiver overrun!\n"));
+ }
+ /* check for excessive collision irq */
+ if (irqbits & IO_STATE(R_IRQ_MASK0_RD, excessive_col, active)) {
+ SETS(network_tr_ctrl_shadow, R_NETWORK_TR_CTRL, clr_error, clr);
+ *R_NETWORK_TR_CTRL = network_tr_ctrl_shadow;
+ SETS(network_tr_ctrl_shadow, R_NETWORK_TR_CTRL, clr_error, nop);
+ dev->stats.tx_errors++;
+ D(printk("ethernet excessive collisions!\n"));
+ }
+ return IRQ_HANDLED;
+}
+
+/* We have a good packet(s), get it/them out of the buffers. */
+static void
+e100_rx(struct net_device *dev)
+{
+ struct sk_buff *skb;
+ int length = 0;
+ struct net_local *np = netdev_priv(dev);
+ unsigned char *skb_data_ptr;
+#ifdef ETHDEBUG
+ int i;
+#endif
+ etrax_eth_descr *prevRxDesc; /* The descriptor right before myNextRxDesc */
+ spin_lock(&np->led_lock);
+ if (!led_active && time_after(jiffies, led_next_time)) {
+ /* light the network leds depending on the current speed. */
+ e100_set_network_leds(NETWORK_ACTIVITY);
+
+ /* Set the earliest time we may clear the LED */
+ led_next_time = jiffies + NET_FLASH_TIME;
+ led_active = 1;
+ mod_timer(&clear_led_timer, jiffies + HZ/10);
+ }
+ spin_unlock(&np->led_lock);
+
+ length = myNextRxDesc->descr.hw_len - 4;
+ dev->stats.rx_bytes += length;
+
+#ifdef ETHDEBUG
+ printk("Got a packet of length %d:\n", length);
+ /* dump the first bytes in the packet */
+ skb_data_ptr = (unsigned char *)phys_to_virt(myNextRxDesc->descr.buf);
+ for (i = 0; i < 8; i++) {
+ printk("%d: %.2x %.2x %.2x %.2x %.2x %.2x %.2x %.2x\n", i * 8,
+ skb_data_ptr[0],skb_data_ptr[1],skb_data_ptr[2],skb_data_ptr[3],
+ skb_data_ptr[4],skb_data_ptr[5],skb_data_ptr[6],skb_data_ptr[7]);
+ skb_data_ptr += 8;
+ }
+#endif
+
+ if (length < RX_COPYBREAK) {
+ /* Small packet, copy data */
+ skb = dev_alloc_skb(length - ETHER_HEAD_LEN);
+ if (!skb) {
+ dev->stats.rx_errors++;
+ printk(KERN_NOTICE "%s: Memory squeeze, dropping packet.\n", dev->name);
+ goto update_nextrxdesc;
+ }
+
+ skb_put(skb, length - ETHER_HEAD_LEN); /* allocate room for the packet body */
+ skb_data_ptr = skb_push(skb, ETHER_HEAD_LEN); /* allocate room for the header */
+
+#ifdef ETHDEBUG
+ printk("head = 0x%x, data = 0x%x, tail = 0x%x, end = 0x%x\n",
+ skb->head, skb->data, skb_tail_pointer(skb),
+ skb_end_pointer(skb));
+ printk("copying packet to 0x%x.\n", skb_data_ptr);
+#endif
+
+ memcpy(skb_data_ptr, phys_to_virt(myNextRxDesc->descr.buf), length);
+ }
+ else {
+ /* Large packet, send directly to upper layers and allocate new
+ * memory (aligned to cache line boundary to avoid bug).
+ * Before sending the skb to upper layers we must make sure
+ * that skb->data points to the aligned start of the packet.
+ */
+ int align;
+ struct sk_buff *new_skb = dev_alloc_skb(MAX_MEDIA_DATA_SIZE + 2 * L1_CACHE_BYTES);
+ if (!new_skb) {
+ dev->stats.rx_errors++;
+ printk(KERN_NOTICE "%s: Memory squeeze, dropping packet.\n", dev->name);
+ goto update_nextrxdesc;
+ }
+ skb = myNextRxDesc->skb;
+ align = (int)phys_to_virt(myNextRxDesc->descr.buf) - (int)skb->data;
+ skb_put(skb, length + align);
+ skb_pull(skb, align); /* Remove alignment bytes */
+ myNextRxDesc->skb = new_skb;
+ myNextRxDesc->descr.buf = L1_CACHE_ALIGN(virt_to_phys(myNextRxDesc->skb->data));
+ }
+
+ skb->protocol = eth_type_trans(skb, dev);
+
+ /* Send the packet to the upper layers */
+ netif_rx(skb);
+
+ update_nextrxdesc:
+ /* Prepare for next packet */
+ myNextRxDesc->descr.status = 0;
+ prevRxDesc = myNextRxDesc;
+ myNextRxDesc = phys_to_virt(myNextRxDesc->descr.next);
+
+ rx_queue_len++;
+
+ /* Check if descriptors should be returned */
+ if (rx_queue_len == RX_QUEUE_THRESHOLD) {
+ flush_etrax_cache();
+ prevRxDesc->descr.ctrl |= d_eol;
+ myLastRxDesc->descr.ctrl &= ~d_eol;
+ myLastRxDesc = prevRxDesc;
+ rx_queue_len = 0;
+ }
+}
+
+/* The inverse routine to net_open(). */
+static int
+e100_close(struct net_device *dev)
+{
+ printk(KERN_INFO "Closing %s.\n", dev->name);
+
+ netif_stop_queue(dev);
+
+ *R_IRQ_MASK0_CLR =
+ IO_STATE(R_IRQ_MASK0_CLR, overrun, clr) |
+ IO_STATE(R_IRQ_MASK0_CLR, underrun, clr) |
+ IO_STATE(R_IRQ_MASK0_CLR, excessive_col, clr);
+
+ *R_IRQ_MASK2_CLR =
+ IO_STATE(R_IRQ_MASK2_CLR, dma0_descr, clr) |
+ IO_STATE(R_IRQ_MASK2_CLR, dma0_eop, clr) |
+ IO_STATE(R_IRQ_MASK2_CLR, dma1_descr, clr) |
+ IO_STATE(R_IRQ_MASK2_CLR, dma1_eop, clr);
+
+ /* Stop the receiver and the transmitter */
+
+ RESET_DMA(NETWORK_TX_DMA_NBR);
+ RESET_DMA(NETWORK_RX_DMA_NBR);
+
+ /* Flush the Tx and disable Rx here. */
+
+ free_irq(NETWORK_DMA_RX_IRQ_NBR, (void *)dev);
+ free_irq(NETWORK_DMA_TX_IRQ_NBR, (void *)dev);
+ free_irq(NETWORK_STATUS_IRQ_NBR, (void *)dev);
+
+ cris_free_dma(NETWORK_TX_DMA_NBR, cardname);
+ cris_free_dma(NETWORK_RX_DMA_NBR, cardname);
+
+ /* Update the statistics here. */
+
+ update_rx_stats(&dev->stats);
+ update_tx_stats(&dev->stats);
+
+ /* Stop speed/duplex timers */
+ del_timer(&speed_timer);
+ del_timer(&duplex_timer);
+
+ return 0;
+}
+
+static int
+e100_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+{
+ struct mii_ioctl_data *data = if_mii(ifr);
+ struct net_local *np = netdev_priv(dev);
+ int rc = 0;
+ int old_autoneg;
+
+ spin_lock(&np->lock); /* Preempt protection */
+ switch (cmd) {
+ /* The ioctls below should be considered obsolete but are */
+ /* still present for compatibility with old scripts/apps */
+ case SET_ETH_SPEED_10: /* 10 Mbps */
+ e100_set_speed(dev, 10);
+ break;
+ case SET_ETH_SPEED_100: /* 100 Mbps */
+ e100_set_speed(dev, 100);
+ break;
+ case SET_ETH_SPEED_AUTO: /* Auto-negotiate speed */
+ e100_set_speed(dev, 0);
+ break;
+ case SET_ETH_DUPLEX_HALF: /* Half duplex */
+ e100_set_duplex(dev, half);
+ break;
+ case SET_ETH_DUPLEX_FULL: /* Full duplex */
+ e100_set_duplex(dev, full);
+ break;
+ case SET_ETH_DUPLEX_AUTO: /* Auto-negotiate duplex */
+ e100_set_duplex(dev, autoneg);
+ break;
+ case SET_ETH_AUTONEG:
+ old_autoneg = autoneg_normal;
+ autoneg_normal = *(int*)data;
+ if (autoneg_normal != old_autoneg)
+ e100_negotiate(dev);
+ break;
+ default:
+ rc = generic_mii_ioctl(&np->mii_if, if_mii(ifr),
+ cmd, NULL);
+ break;
+ }
+ spin_unlock(&np->lock);
+ return rc;
+}
+
+static int e100_get_settings(struct net_device *dev,
+ struct ethtool_cmd *cmd)
+{
+ struct net_local *np = netdev_priv(dev);
+ int err;
+
+ spin_lock_irq(&np->lock);
+ err = mii_ethtool_gset(&np->mii_if, cmd);
+ spin_unlock_irq(&np->lock);
+
+ /* The PHY may support 1000baseT, but the Etrax100 does not. */
+ cmd->supported &= ~(SUPPORTED_1000baseT_Half
+ | SUPPORTED_1000baseT_Full);
+ return err;
+}
+
+static int e100_set_settings(struct net_device *dev,
+ struct ethtool_cmd *ecmd)
+{
+ if (ecmd->autoneg == AUTONEG_ENABLE) {
+ e100_set_duplex(dev, autoneg);
+ e100_set_speed(dev, 0);
+ } else {
+ e100_set_duplex(dev, ecmd->duplex == DUPLEX_HALF ? half : full);
+ e100_set_speed(dev, ecmd->speed == SPEED_10 ? 10: 100);
+ }
+
+ return 0;
+}
+
+static void e100_get_drvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *info)
+{
+ strlcpy(info->driver, "ETRAX 100LX", sizeof(info->driver));
+ strlcpy(info->version, "$Revision: 1.31 $", sizeof(info->version));
+ strlcpy(info->fw_version, "N/A", sizeof(info->fw_version));
+ strlcpy(info->bus_info, "N/A", sizeof(info->bus_info));
+}
+
+static int e100_nway_reset(struct net_device *dev)
+{
+ if (current_duplex == autoneg && current_speed_selection == 0)
+ e100_negotiate(dev);
+ return 0;
+}
+
+static const struct ethtool_ops e100_ethtool_ops = {
+ .get_settings = e100_get_settings,
+ .set_settings = e100_set_settings,
+ .get_drvinfo = e100_get_drvinfo,
+ .nway_reset = e100_nway_reset,
+ .get_link = ethtool_op_get_link,
+};
+
+static int
+e100_set_config(struct net_device *dev, struct ifmap *map)
+{
+ struct net_local *np = netdev_priv(dev);
+
+ spin_lock(&np->lock); /* Preempt protection */
+
+ switch(map->port) {
+ case IF_PORT_UNKNOWN:
+ /* Use autoneg */
+ e100_set_speed(dev, 0);
+ e100_set_duplex(dev, autoneg);
+ break;
+ case IF_PORT_10BASET:
+ e100_set_speed(dev, 10);
+ e100_set_duplex(dev, autoneg);
+ break;
+ case IF_PORT_100BASET:
+ case IF_PORT_100BASETX:
+ e100_set_speed(dev, 100);
+ e100_set_duplex(dev, autoneg);
+ break;
+ case IF_PORT_100BASEFX:
+ case IF_PORT_10BASE2:
+ case IF_PORT_AUI:
+ spin_unlock(&np->lock);
+ return -EOPNOTSUPP;
+ default:
+ printk(KERN_ERR "%s: Invalid media selected", dev->name);
+ spin_unlock(&np->lock);
+ return -EINVAL;
+ }
+ spin_unlock(&np->lock);
+ return 0;
+}
+
+static void
+update_rx_stats(struct net_device_stats *es)
+{
+ unsigned long r = *R_REC_COUNTERS;
+ /* update stats relevant to reception errors */
+ es->rx_fifo_errors += IO_EXTRACT(R_REC_COUNTERS, congestion, r);
+ es->rx_crc_errors += IO_EXTRACT(R_REC_COUNTERS, crc_error, r);
+ es->rx_frame_errors += IO_EXTRACT(R_REC_COUNTERS, alignment_error, r);
+ es->rx_length_errors += IO_EXTRACT(R_REC_COUNTERS, oversize, r);
+}
+
+static void
+update_tx_stats(struct net_device_stats *es)
+{
+ unsigned long r = *R_TR_COUNTERS;
+ /* update stats relevant to transmission errors */
+ es->collisions +=
+ IO_EXTRACT(R_TR_COUNTERS, single_col, r) +
+ IO_EXTRACT(R_TR_COUNTERS, multiple_col, r);
+}
+
+/*
+ * Get the current statistics.
+ * This may be called with the card open or closed.
+ */
+static struct net_device_stats *
+e100_get_stats(struct net_device *dev)
+{
+ struct net_local *lp = netdev_priv(dev);
+ unsigned long flags;
+
+ spin_lock_irqsave(&lp->lock, flags);
+
+ update_rx_stats(&dev->stats);
+ update_tx_stats(&dev->stats);
+
+ spin_unlock_irqrestore(&lp->lock, flags);
+ return &dev->stats;
+}
+
+/*
+ * Set or clear the multicast filter for this adaptor.
+ * num_addrs == -1 Promiscuous mode, receive all packets
+ * num_addrs == 0 Normal mode, clear multicast list
+ * num_addrs > 0 Multicast mode, receive normal and MC packets,
+ * and do best-effort filtering.
+ */
+static void
+set_multicast_list(struct net_device *dev)
+{
+ struct net_local *lp = netdev_priv(dev);
+ int num_addr = netdev_mc_count(dev);
+ unsigned long int lo_bits;
+ unsigned long int hi_bits;
+
+ spin_lock(&lp->lock);
+ if (dev->flags & IFF_PROMISC) {
+ /* promiscuous mode */
+ lo_bits = 0xfffffffful;
+ hi_bits = 0xfffffffful;
+
+ /* Enable individual receive */
+ SETS(network_rec_config_shadow, R_NETWORK_REC_CONFIG, individual, receive);
+ *R_NETWORK_REC_CONFIG = network_rec_config_shadow;
+ } else if (dev->flags & IFF_ALLMULTI) {
+ /* enable all multicasts */
+ lo_bits = 0xfffffffful;
+ hi_bits = 0xfffffffful;
+
+ /* Disable individual receive */
+ SETS(network_rec_config_shadow, R_NETWORK_REC_CONFIG, individual, discard);
+ *R_NETWORK_REC_CONFIG = network_rec_config_shadow;
+ } else if (num_addr == 0) {
+ /* Normal, clear the mc list */
+ lo_bits = 0x00000000ul;
+ hi_bits = 0x00000000ul;
+
+ /* Disable individual receive */
+ SETS(network_rec_config_shadow, R_NETWORK_REC_CONFIG, individual, discard);
+ *R_NETWORK_REC_CONFIG = network_rec_config_shadow;
+ } else {
+ /* MC mode, receive normal and MC packets */
+ char hash_ix;
+ struct netdev_hw_addr *ha;
+ char *baddr;
+
+ lo_bits = 0x00000000ul;
+ hi_bits = 0x00000000ul;
+ netdev_for_each_mc_addr(ha, dev) {
+ /* Calculate the hash index for the GA registers */
+
+ hash_ix = 0;
+ baddr = ha->addr;
+ hash_ix ^= (*baddr) & 0x3f;
+ hash_ix ^= ((*baddr) >> 6) & 0x03;
+ ++baddr;
+ hash_ix ^= ((*baddr) << 2) & 0x03c;
+ hash_ix ^= ((*baddr) >> 4) & 0xf;
+ ++baddr;
+ hash_ix ^= ((*baddr) << 4) & 0x30;
+ hash_ix ^= ((*baddr) >> 2) & 0x3f;
+ ++baddr;
+ hash_ix ^= (*baddr) & 0x3f;
+ hash_ix ^= ((*baddr) >> 6) & 0x03;
+ ++baddr;
+ hash_ix ^= ((*baddr) << 2) & 0x03c;
+ hash_ix ^= ((*baddr) >> 4) & 0xf;
+ ++baddr;
+ hash_ix ^= ((*baddr) << 4) & 0x30;
+ hash_ix ^= ((*baddr) >> 2) & 0x3f;
+
+ hash_ix &= 0x3f;
+
+ if (hash_ix >= 32) {
+ hi_bits |= (1 << (hash_ix-32));
+ } else {
+ lo_bits |= (1 << hash_ix);
+ }
+ }
+ /* Disable individual receive */
+ SETS(network_rec_config_shadow, R_NETWORK_REC_CONFIG, individual, discard);
+ *R_NETWORK_REC_CONFIG = network_rec_config_shadow;
+ }
+ *R_NETWORK_GA_0 = lo_bits;
+ *R_NETWORK_GA_1 = hi_bits;
+ spin_unlock(&lp->lock);
+}
+
+void
+e100_hardware_send_packet(struct net_local *np, char *buf, int length)
+{
+ D(printk("e100 send pack, buf 0x%x len %d\n", buf, length));
+
+ spin_lock(&np->led_lock);
+ if (!led_active && time_after(jiffies, led_next_time)) {
+ /* light the network leds depending on the current speed. */
+ e100_set_network_leds(NETWORK_ACTIVITY);
+
+ /* Set the earliest time we may clear the LED */
+ led_next_time = jiffies + NET_FLASH_TIME;
+ led_active = 1;
+ mod_timer(&clear_led_timer, jiffies + HZ/10);
+ }
+ spin_unlock(&np->led_lock);
+
+ /* configure the tx dma descriptor */
+ myNextTxDesc->descr.sw_len = length;
+ myNextTxDesc->descr.ctrl = d_eop | d_eol | d_wait;
+ myNextTxDesc->descr.buf = virt_to_phys(buf);
+
+ /* Move end of list */
+ myLastTxDesc->descr.ctrl &= ~d_eol;
+ myLastTxDesc = myNextTxDesc;
+
+ /* Restart DMA channel */
+ *R_DMA_CH0_CMD = IO_STATE(R_DMA_CH0_CMD, cmd, restart);
+}
+
+static void
+e100_clear_network_leds(unsigned long dummy)
+{
+ struct net_device *dev = (struct net_device *)dummy;
+ struct net_local *np = netdev_priv(dev);
+
+ spin_lock(&np->led_lock);
+
+ if (led_active && time_after(jiffies, led_next_time)) {
+ e100_set_network_leds(NO_NETWORK_ACTIVITY);
+
+ /* Set the earliest time we may set the LED */
+ led_next_time = jiffies + NET_FLASH_PAUSE;
+ led_active = 0;
+ }
+
+ spin_unlock(&np->led_lock);
+}
+
+static void
+e100_set_network_leds(int active)
+{
+#if defined(CONFIG_ETRAX_NETWORK_LED_ON_WHEN_LINK)
+ int light_leds = (active == NO_NETWORK_ACTIVITY);
+#elif defined(CONFIG_ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY)
+ int light_leds = (active == NETWORK_ACTIVITY);
+#else
+#error "Define either CONFIG_ETRAX_NETWORK_LED_ON_WHEN_LINK or CONFIG_ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY"
+#endif
+
+ if (!current_speed) {
+ /* Make LED red, link is down */
+ CRIS_LED_NETWORK_SET(CRIS_LED_OFF);
+ } else if (light_leds) {
+ if (current_speed == 10) {
+ CRIS_LED_NETWORK_SET(CRIS_LED_ORANGE);
+ } else {
+ CRIS_LED_NETWORK_SET(CRIS_LED_GREEN);
+ }
+ } else {
+ CRIS_LED_NETWORK_SET(CRIS_LED_OFF);
+ }
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void
+e100_netpoll(struct net_device* netdev)
+{
+ e100rxtx_interrupt(NETWORK_DMA_TX_IRQ_NBR, netdev);
+}
+#endif
+
+static int
+etrax_init_module(void)
+{
+ return etrax_ethernet_init();
+}
+
+static int __init
+e100_boot_setup(char* str)
+{
+ struct sockaddr sa = {0};
+ int i;
+
+ /* Parse the colon separated Ethernet station address */
+ for (i = 0; i < ETH_ALEN; i++) {
+ unsigned int tmp;
+ if (sscanf(str + 3*i, "%2x", &tmp) != 1) {
+ printk(KERN_WARNING "Malformed station address");
+ return 0;
+ }
+ sa.sa_data[i] = (char)tmp;
+ }
+
+ default_mac = sa;
+ return 1;
+}
+
+__setup("etrax100_eth=", e100_boot_setup);
+
+module_init(etrax_init_module);